Parkside Soldering Gun PLBS 30 A1 User Manual

FINE SOLDERING IRON SET PLBS 30 A1  
FINE SOLDERING IRON SET  
Operation and Safety Notes  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
2
3
4
5
4
5
8
6
7
A
C
B
9
10 11  
3
D
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of contents  
Introduction  
Proper use ...............................................................................Page  
7
8
8
8
Features and equipment.........................................................Page  
Included items.........................................................................Page  
Technical information .............................................................Page  
Safety advice  
1. Workplace safety...............................................................Page  
2. Electrical safety..................................................................Page  
9
9
3. Personal safety...................................................................Page 10  
4. Careful handling and use of electrical power tools........Page 12  
Original accessories/attachments.......................................Page 13  
Before first use  
Fitting the helical spring .........................................................Page 13  
Inserting/replacing soldering tips........................................Page 13  
Operation  
Switching on and off ..............................................................Page 14  
Third hand ...............................................................................Page 14  
Solder sponge.........................................................................Page 14  
Soldering.................................................................................Page 15  
Maintenance and cleaning..................................Page 16  
Service centre .................................................................Page 17  
Warranty ............................................................................Page 17  
Disposal................................................................................Page 18  
Declaration of Conformity/Manufacturer..Page 19  
GB/IE  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
The following pictograms are used in these operating  
instructions/on the device:  
Read instruction manual!  
Observe caution and safety notes!  
Cautionelectric shock! Danger to life!  
Risk of explosion!  
Risk of fire!  
Warning - Hot surfaces!  
Volt (AC)  
V
~
Watts (Effective power)  
W
Wear a breathing/dust mask, protective glasses,  
gloves and clothing.  
Keep children away from electrical devices!  
Check that the device, mains lead and plug are in  
good condition!  
Do not smoke!  
Do not eat!  
6
GB/IE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Do not drink!  
Dispose packaging and appliance in an  
environmentally-friendly way!  
Fine soldering iron set PLBS 30 A1  
©
Introduction  
Please make sure you familiarise yourself fully with the way  
the device works before you use it for the first time and that  
you understand how to handle it correctly. Please read the  
operating instructions below. Be careful to keep these advice notes  
and if necessary pass them on to a third party.  
©
Proper use  
The appliance is intended for electronic soldering for leisure and DIY  
purposes. It is designed for uses such as soldering work, wood-engrav-  
ing, welding and gluing plastics and the application of decorations.  
Use the device only as described and for the indicated purposes. The  
device is not intended for commercial use. Any other use or modifica-  
tion to the device shall be considered as improper use and could give  
rise to considerable dangers. The manufacturer will not accept  
liability for loss or damage arising from improper use.  
GB/IE  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
©
Features and equipment  
1
2
Soldering pencil  
Soldering tip  
3
Helical spring  
4
Clips  
5
Third hand  
6
7
8
9
10  
11  
Holder for copper attachments  
Multifunctional holder  
Soldering sponge  
Universal attachment  
Pointed attachment  
Conical attachment  
©
Included items  
1
1
1
2
4
1
1
Fine soldering iron set PLBS 30 A1  
Multifunctional holder  
Tin solder, 20grams  
Soldering tips (1x installed)  
Copper attachments (engraving tips)  
Solder sponge  
Operating instructions  
©
Technical information  
Electricity supply:  
Frequency:  
230V  
50Hz  
~
Power consumption: 30W  
8
GB/IE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety advice  
Safety advice  
CAUTION! Failure to observe the instructions and advice given  
below may result in electric shock, fire and/or serious injury.  
1. Workplace safety  
a) Keep your working area clean and well lit. Untidy or  
poorly lit working areas can lead to accidents.  
b)  
c)  
Do not work with the device in potentially  
explosive environments in which there are  
inflammable liquids, gases or dusts. Electrical  
power tools create sparks, which can ignite dusts or fumes.  
Keep children and other people away  
while you are operating the electrical tool.  
Distractions can cause you to lose control of the device.  
2. Electrical safety  
To avoid danger to life from electric shock:  
a) The mains plug on the device must match the mains sock-  
et. The plug must not be modified in any way. Do not  
use an adapter plug with devices fitted with a protec-  
tive earth. Unmodified plugs and matching sockets reduce the  
risk of electric shock.  
b) Keep the device away from rain or moisture. Water  
entering an electrical device increases the risk of electric shock.  
GB/IE  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety advice  
c) Use a residual current device (RCD) for protection if  
operating the electrical power tool in a moist envi-  
ronment is unavoidable. The use of an RCD reduces the risk  
of electric shock.  
d)  
Do not use the mains lead for any purpose for  
which it was not intended, e.g. to carry the  
device, to hang up the device or to pull the  
mains plug out of the mains socket. Keep the mains  
lead away from heat, oil, sharp edges or moving parts  
of the device. Damaged or tangled mains leads increase the  
risk of electric shock.  
e) Do not operate the device if the mains lead or mains plug is  
damaged.  
A damaged mains lead presents a serious  
danger to life from electric shock.  
f) Always keep the mains lead out of the operating area and run it  
away from the rear of the device.  
g) Always pull out the mains plug if you are about to leave the device  
unattended or wish to carry out any tasks on the device.  
3. Personal safety  
a) Children or persons who lack the knowledge or ex-  
perience to use the device or whose physical, sensory  
or intellectual capacities are limited must never be  
allowed to use the device without supervision or in-  
struction by a person responsible for their safety.  
Children must never be allowed to play with the device.  
b) Remain alert at all times, watch what you are doing  
and always proceed with caution. Do not use the  
device if you are tired or under the influence of  
10 GB/IE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety advice  
drugs, alcohol or medication. One moment of carelessness  
when using the device can lead to serious injury.  
DANGER OF BURNS! Never touch the hot soldering  
tip or the molten solder. You could suffer burn injuries.  
Always let the device cool before you replace components  
on the device, clean it or check its condition.  
After use let the soldering pencil cool down in air only. Under no  
circumstances quench the tip in water!  
CAUTION! DANGER OF FIRE! Place the soldering  
pencil down only in the special multifunctional holder  
or on a fire-resistant pad.  
Place the soldering pencil in the multifunctional holder during  
pauses in your work.  
Keep the device away from combustible material.  
Never leave the device switched on and unattended.  
CAUTION! DANGER OF INJURY! Keep your hands away  
from the hot workpiece. The heat from soldering can be conducted  
through the workpiece. For this reason you should use the third  
hand to hold small workpieces.  
Avoid placing the hot soldering tip in contact with the plastic parts  
of the multifunctional holder. Failure to observe this advice may  
result in damage to the device.  
If a dangerous situation arises, pull the mains plug immediately  
out of the mains socket.  
CAUTION! DANGER OF POISONING! Do not breathe air  
contaminated with soldering fumes.  
When working with the device for long periods do not  
allow the fumes from soldering to build up. They may  
be hazardous to health. Always provide adequate  
ventilation of your working area. In addition, it is recommended  
that you wear protective gloves, a face mask and a protective  
apron.  
GB/IE 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety advice  
Do not eat, drink or smoke in rooms where soldering is carried  
out. Otherwise your hands may transfer any adhering traces of  
lead via food or cigarettes into your body.  
Always wash your hands immediately after soldering .  
Do not dispose of soldering waste with the household rubbish.  
Soldering waste must disposed of as special waste.  
4. Careful handling and use  
of electrical power tools  
a) When not in use always ensure that electrical power  
tools are kept out of reach of children. Do not let any-  
one use the device if he or she is not familiar with it  
or has not read the instructions and advice. Electrical  
power tools are dangerous when they are used by inexperienced  
people.  
b) Look after the device carefully. Check for broken  
parts or parts that are damaged to the extent they  
detrimentally affect the functioning of the device.  
Have any damaged parts repaired before you use  
the device. Many accidents have their origins in poorly main-  
tained electrical tools.  
12 GB/IE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety advice/Before first use  
©
Original accessories/attachments  
Use only the accessories detailed in the operating instructions. The  
use of attachments or accessories other than those recommended  
here could lead to you suffering an injury.  
©
©
Before first use  
Fitting the helical spring  
3
Insert the narrower end of the helical spring  
into the opening  
7
of the multifunctional holder . Ensure that the outwardly bent  
end of the helix points upwards and insert it into the recess provid-  
7
ed for it in the multifunctional holder  
(see arrow in Fig. B).  
3
3
Push the helical spring  
Turn the helical spring  
into the opening as far as it will go.  
clockwise to fix the multifunctional  
7
holder  
in place.  
©
Inserting/replacing soldering tips  
CAUTION! DANGER OF BURNS! Allow the soldering  
pencil to heat up without a soldering tip.  
2
9
10 11  
Removal of a soldering tip  
or a copper attachment  
may only be done when the appliance has been switched off and  
the soldering tip or attachment has cooled down.  
All soldering tips and attachments have a screw thread and can,  
therefore, be easily and quickly replaced on the soldering pencil  
Turn the soldering tip or attachment anti-clockwise to remove it.  
Turn the soldering tip or attachment clockwise to fix it in place.  
1
.
GB/IE 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
©
Operation  
©
Switching on and off  
Switching on:  
Insert the mains plug into a suitable mains socket.  
Switching off:  
Pull the plug out of the mains socket to switch off the device.  
©
Third hand  
CAUTION! DANGER OF BURNS! The clips on the  
5
third hand  
can become hot while you are soldering the  
workpiece.  
1. Fold out the third hand  
5
upwards.  
4
2. Rotate the clips  
3. Clamp the workpiece between the two clips  
until they are oriented in the required direction.  
4
.
©
Solder sponge  
2
CAUTION! The hot soldering tip  
must never be placed in  
8
contact with a dry solder sponge , otherwise the solder sponge  
may be damaged.  
The solder sponge  
8
is used to clean soldering tips.  
8
Moisten the solder sponge  
before you use it.  
14 GB/IE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
©
Soldering  
The soldering pencil has a rated output of 30watts and is there-  
fore ideal for electronics soldering.  
The design of the soldering pencil makes it especially suitable for  
use where access is difficult or for fine soldering work.  
To achieve the best results use electronics solder 1.0 or 1.5mm  
diameter 100% Sn. We recommend the use of soldering paste  
(not soldering grease or soldering fluid) as a flux.  
2
8
Clean the soldering tip  
on the moist solder sponge  
.
2
After cleaning the tip  
it must be “tinned” (coated with solder).  
This is done by melting solder on to the hot soldering tip  
2
.
2
Guide the soldering tip  
to the intended joint site and heat the joint.  
2
Place the solder (with flux) between the joint site and the tip  
to melt it.  
Continue to feed further solder until the whole joint has a covering  
of solder.  
Then quickly remove the soldering tip in order to avoid overheating  
the molten solder.  
Allow the solder to harden while not subjecting it to vibration or  
movement.  
Note: The flux is either already contained in the solder or applied  
separately. Ask the advice of the retailer when buying solder in or-  
der to choose the most suitable solder for your intended purpose.  
Attachments and applications:  
ATTENTION! Do not carry out any special changes or repairs to the  
electrics or other parts. Exceptions are permitted if the person carrying  
out such changes or repairs is qualified or trained to do so.  
GB/IE 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation/Maintenance and cleaning  
You can fashion and decorate various materials with your soldering  
pencil. Remove the parts of the surface or engrave design elements  
into it (see Fig. D).  
You can carry out these decorations in, for example, wood, leather,  
paper, papier mâché, smooth fabrics, thin plastics or candle wax.  
Try every application out on surplus material and see if you get the effect  
you wish to have. This means you will avoid damaging the item you  
wish to work on.  
9
Universal attachment  
:
E.g. for drawings with broad and thin lines on various materials  
10  
Pointed attachment  
:
E.g. for details or shading in over large areas  
11  
Conical attachment  
:
E.g. for dots, curves and handwriting, detailed work  
©
Maintenance and cleaning  
RISK OF INJURY! Before you carry out any  
work on the device always pull the mains plug out of the mains socket  
and allow the device to cool.  
Clean the device after you have finished using it.  
Use a cloth and a little mild detergent for cleaning the device.  
In no circumstances use sharp objects, or petrol, solvents or clean-  
ing agents that might attack plastic.  
Do not allow any liquids to enter the inside of the device.  
16 GB/IE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service centre/Warranty  
©
Service centre  
Have your device repaired only by  
qualified specialist personnel using original manu-  
facturer parts only. This will ensure that your device remains  
safe to use.  
If the plug or mains lead needs to be  
replaced, always have the replacement carried out  
by the manufacturer or his service centre. This will ensure  
that your device remains safe to use.  
©
Warranty  
The warranty for this appliance is for 3 years from the  
date of purchase. The appliance has been manufactured  
with care and meticulously examined before delivery.  
Please retain your receipt as proof of purchase. In the  
event of a warranty claim, please make contact by tele-  
phone with our Service Department. Only in this way  
can a post-free despatch for your goods be assured.  
The warranty covers only claims for material and maufacturing defects,  
but not for transport damage, for wearing parts or for damage to frag-  
ile components, e.g. buttons or batteries. This product is for private use  
only and is not intended for commercial use.  
The warranty is void in the case of abusive and improper handling,  
use of force and internal tampering not carried out by our authorized  
service branch. Your statutory rights are not restricted in any way by  
this warranty.  
GB/IE 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty/Disposal  
The warranty period will not be extended by repairs made unter warranty.  
This applies also to replaced and repaired parts. Any damage and de-  
fects extant on purchase must be reported immediately after unpacking  
the appliance, at the latest, two days after the purchase date. Repairs  
made after the expiration of the warranty period are subject to payment.  
GB  
DES UK LTD  
Tel.:  
0871 5000 700 (£ 0.10 / minute)  
IE  
Kompernass Service Ireland  
Tel:  
1850 930 412 (0,082 EUR/Min.)  
Standard call rates apply.  
Mobile operators may vary.  
©
Disposal  
The packaging is wholly composed of environmentally-friendly  
materials that can be disposed of at a local recycling centre.  
Do not dispose of electrical devices  
with the household rubbish!  
In accordance with European Directive 2002/96/EC (covering  
waste electrical and electronic equipment) and its transposition into  
national legislation, worn out electrical devices must be collected  
separately and taken for environmentally compatible recycling.  
18 GB/IE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disposal/Declaration of Conformity/Manufacturer  
Contact your local refuse disposal authority for more details of how to  
dispose of your worn-out devices.  
©
Declaration of Conformity/Manufacturer  
We, Kompernaß GmbH, the person responsible for documents:  
Mr Felix Becker, Burgstr. 21, D-44867 Bochum, Germany, hereby  
declare that this product complies with the following standards, norma-  
tive documents and EU directives:  
EU Low Voltage Directive  
(2006/95/EC)  
Electromagnetic Compatibility  
(2004/108/EC)  
Applicable harmonized standards  
EN 55014-1:2006  
EN 55014-2/A2:2008  
EN 60335-1/A13:2008  
EN 60335-2-45/A1:2008  
EN 61000-3-2:2006  
EN 61000-3-3:2008  
EN 62233:2008  
Type/Device description:  
Fine soldering iron set PLBS 30 A1  
Date of manufacture (DOM): 01-2011  
Serial number: IAN 61647  
GB/IE 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Declaration of Conformity/Manufacturer  
Bochum, 31.01.2011  
Hans Kompernaß  
- Managing Director -  
We reserve the right to make technical modifications in the course of  
further development.  
20 GB/IE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IAN 61647  
KOMPERNASS GMBH  
Burgstraße 21  
D-44867 Bochum  
© by ORFGEN Marketing  
Last Information Update : 01/2011  
Ident.-No.: PLBS30A1012011-6  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Ventilation Hood DA 390 5 User Manual
Milwaukee Home Safety Product 2217 20 User Manual
MTX Audio Stereo Amplifier THUNDER895 User Manual
Multi Tech Systems Network Card CF220 User Manual
Nortel Networks Telephone RTU 292 User Manual
Oceanic Scuba Diving Equipment 04892916 User Manual
Oregon Scientific Clock BAA339DPH User Manual
Oregon Weather Radio BAR388HGA User Manual
Panasonic Electric Shaver ESLV95 User Manual
Panasonic Fax Machine KX FLB753HK User Manual