Quick Reference Guide for
Number Display Service
KX-PW30CL2
KX-PW10CL2
Download from Www.Somanuals.com. All Manuals Search And Download.
Number Display Service Functions
Setting up
Searching for a phone number
1
2
Subscribe to NTT, and then set the display to
“ アリ ” (ON).
Using the Number Display Service, this unit can store
phone numbers and the date and time of the calls in
memory. [Up to 30 calls, except 99 calls, can be stored
くるくる電話帳
くるくる電話帳
登録 選択 機能
in
(search dial).] By using (search dial), you
can search for the phone number, and the date and
time of a call on the display of the unit.
1
4
7
2
5
8
0
3
6
9
[When you have not answered (a) call(s)]
チャクシンカ
ﾞ
アリマシタ
ストップ
着信メモリー
電話帳表示切換
1. Press
2. Press
3. Press
(function).
機能
選択
1
4
7
2
5
8
0
3
6
9
1
3
3
.
(select) to select “ アリ” (ON).
くるくる電話帳
ストップ
ON
N O . テ
ﾞ
ィスフ°レイ= アリ
Changes each time you
press
(function).
機能
着信メモリー
1. Press
(received call memory).
N O . テ
ﾞ
ィスフ°レイ= ナシ
OFF
くるくる電話帳
2. Rotate (search dial) to the right.
4. Press
5. Press
(record).
登録
(Rotating to the right will change the display from
the latest call and to the left, from the oldest one.)
ストップ
(stop).
●
“ ” means new calls which have not been
Note:
checked.
電話帳表示切換
● If you do not set the unit to “ アリ ” (ON), the first
bell will ring shorter than usual, even if you receive
the service.
●
Each time you press (operation guide),
the display will change from the number to the
date and time.
Up to 14 digits can be displayed.
●
When you cancel the service, select “ ナシ ” (OFF)
●
in step 3.
ストップ
3. When finished, press
(stop).
Note:
●
In step 1, if there are no calls in memory,
will be displayed.
チャクシンカ
ﾞ
アリマセン
●
●
When there are more than 30 calls in memory, they
will be erased from the oldest one, even if you have
not viewed them.
If the caller subscribes to a Dial-in Service,
- One of the numbers contacting the Dial-in Service
will be displayed.
OR
- When subscribing to a Dial-in Service using
several telephone lines in a company, the phone
number displayed depends on the line being used.
The date and time of the call will be stored using the
time programmed in the unit. Program the correct
time.
●
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Number Display Service Functions
くるくる電話帳
くるくる電話帳
Sending a fax with
(search dial)
Calling with (search dial)
3
4
着信メモリー
Document Tray
Handset
Handset
スピーカーホン
画質
くるくる電話帳
スタート／コピー
着信メモリー
スタート／コピー
くるくる電話帳
1. Open the document tray and adjust the guides.
●Insert the document FACE DOWN.
●Insert up to 5 sheets at a time.
着信メモリー
1. Press (received call memory).
2.
Insert the document (a beep will be heard), and
then select the resolution by pressing
くるくる電話帳
画質
(resolution).
2. Rotate (search dial) until the number you
want to dial is displayed.
●Up to 14 digits can be displayed.
ｶﾞｼﾂ= ﾌﾂｳ
STANDARD
FINE
スピーカーホン
ｶﾞｼﾂ= ﾁｲｻｲ
3. Lift the handset, or press (speakerphone).
スタート／コピー
●You can also dial by pressing (start/copy).
HALF TONE
ｶﾞｼﾂ= ｼｬｼﾝ
(If a document is inserted, the unit will send a
fax.)
3. Press 着 信メ モリ ー(received call memory).
くるくる電話帳
4. Talk to the other party.
4. Rotate (search dial) until the number you
5. When finished, replace the handset, or press
スピーカーホン
want to dial is displayed.
(speakerphone).
スタート／コピー
Press (start/copy).
5.
After the message is displayed, the unit will start to
send the fax.
Note:
●You can also call using the following procedure.
スピーカーホン
1. Lift the handset, or press (speakerphone).
- Dial 184 or 186, if required.
着信メモリー
Note:
●If the line is busy, the unit will automatically redial
the number up to three times at one minute
intervals.
2. Press (received call memory).
くるくる電話帳
(Automatic Redialing)
If you want to dial 184 or 186 to send a fax, proceed
3. Rotate (search dial) until the number you
●
want to dial is displayed.
as follows.
スタート／コピー
1. Insert the document, and then lift the handset.
4. Press (start/copy) while a long beep is
heard.
2. Dial 184 or 186.
- If you dialed 184 or 186, press
スタート／コピー
(start/copy) when 3 beeps are heard.
着信メモリー
3. Press (received call memory).
くるくる電話帳
4. Rotate (search dial) until the number you
want to dial is displayed.
スタート／コピー
5. Press (start/copy) when 3 beeps are heard.
スタート／コピー
6. Press (start/copy) again.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Number Display Service Functions
Printing a caller list
5
ex. If you receive a Dial-in Service:
着信リスト
1998.1.1 12：00
ダイヤルイン
No.
年 月 日
1997.12.31
1997.12.30
1997.12.30
時分
相手局名
1
15：30
13：54
8：30
4321(オヤキ)
4320(コキ 1)
4321(オヤキ)
09876543・・
01234567・・
コウシュウテﾞンワ
2
3
マーク：ミカクニンノ チャクシンメモリー
■No., 年月日(year/month/day), 時分(hour/minute)
The unit prints the date and time of the received calls from the most recent call. (up to 30 calls)
■相手局名(caller's phone number)
The unit prints the phone number of the caller. If the caller’s name or phone number cannot be
displayed, a message will be printed out instead. “ ” means the call has not been checked.
Up to 20 digits, including “ ”, can be printed.
■ダイヤルイン(Dial-in)
The unit prints 4 digits after the phone number which contacts the Dial-in Service, whether
it was a voice or a fax call, and if the call was received by the main unit or the handset.
●If you do not subscribe to a Dial-in Service, disregard this section.
1. Press 着信メモリー(received call memory).
着信メモリー
2. Press スタート／コピー(start/copy).
ストップ
3. When finished, press
(stop).
Note:
1
4
7
2
5
8
0
3
6
9
● When there are more than 30 calls in memory,
the unit will erase calls from the oldest one.
ストップ
●
If you press (stop) in step 3, all calls will be noted
as viewed ones, so “ ” will not appear on the display.
will also not be displayed.
ストップ
チャクシンｶﾞ アリマシタ
スタート／コピー
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Number Display Service Functions
You can erase phone numbers of the callers stored in the memory.
Erasing a phone number
Erasing all of the phone numbers
6
7
着信メモリー
着信メモリー
消去
消去
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
9
くるくる電話帳
ストップ
スタート／コピー
スタート／コピー
1. Press着信メモリ ー (received call memory).
1. Press 着信メ モリ ー(received call memory).
くるくる電話帳
消去
2. Press (erase).
2. Rotate (search dial) until the number you want
スタート／コピー
to erase is displayed.
3. Press
(start/copy).
消去
3. Press (erase).
スタート／コピー
4. Press (start/copy).
ストップ
5. When finished, press (stop).
PFQX1239ZA
Download from Www.Somanuals.com. All Manuals Search And Download.
|