TURQUOISE SWITCHES
ABJ TYPE
HIGH ENVIRONMENTAL
RESISTANCE
FEATURES
6
• Ultra-miniature size (12.8×6.5×6 mm)
12.8
6.5
• Sealed construction for use in adverse environment-Sealed
construction by epoxy resin and rubber cap greatly reduces possible
miscontact due to contaminants such as dust. Conforming to IP67* of
IEC protective construction classification
• Elastomer double molding technology, an industry first and ultrasonic
swaging technology contribute to uniform sealing in high production
quantities
Dust protected type
(Mounting hole
2.3mm type)
• UL/CSA approved (Except the long stroke type of ABJ2 and the side
wire leads type.)
• Long stroke type is available
Since the repeatability is excellent and the play distance (overtravel) from
the operating position is ample, the task of performing adjustments during
installation is easy.
Operating position accuracy 0.4 mm
Overtravel= Min. 2.0 mm
Immersion protected type
(wire leads bottom type)
(Mounting hole
2.3mm type)
As wide range of high pressure is achieved, a stable reliability is ensured
• Leaf lever side wire leads type added. We now offer two types.
M3 type installation hole
Fixed pin type
TYPICAL APPLICATIONS
Immersion protected
(wire leads side type)
Long stroke type
• Industrial use video jack
• Automotive (ex. Device for opening and shutting of automobile doors)
* Based on the protective construction classification of IEC, items which
satisfy the test requirements are denoted with an IP designation.
Compliance with RoHS Directive
ORDERING INFORMATION
(If Agency standard required, please refer to the “with Agency standard type”. See next page.)
Ex. ABJ
1
4
1
0
4
0
Operating force
by pin plunger
(max.)
Type of
switch
Size of
mounting hole
Contact
arrangement
Terminal
Actuator
Contact
ABJ:
1: 1.2 mm
4: Solder terminal
5: PC board terminal
6: Wire leads (bottom type)
7: Wire leads (right side type)
1: SPDT
2: SPST-NC
0: Pin plunger
2: Hinge lever
4: 1.23 N
6: 1.96 N
0: AgNi alloy
1: AgNi alloy
+ Au clad
Turquoise 2: 2.3 mm
switch
J type
3: 3 mm
4: Fixed pin
(Wire leads 4: Simulated roller lever 7: 2.45 N
type only)
3: SPST-NO
(Wire leads
type only)
6: Roller lever
8: Leaf lever
(Mounting hole 3 mm
lead wire type only)
L: Long stroke type
(Long stroke
type only)
(right side pin) type 8: Wire leads (left side type)
5: Fixed pin
(left side pin) type
Remarks: 1. Standard packing: Dust protected type 100 pcs./carton, 2,000 pcs./case; Immersion protected type 50 pcs./case.
2. Not every combination is available. Please refer to the following table, “PRODUCT TYPES”.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
ABJ1,2,3,4,5
PRODUCT TYPES
1. Dust protected type (Terminal type)
Mounting hole 1.2mm type / Mounting hole 2.3mm type
AgNi alloy
Mounting hole 1.2 mm type
Solder terminal
Mounting hole 2.3 mm type
Solder terminal
ABJ2410409
Operating force
Actuator
Max.
PC board terminal
ABJ1510409
ABJ1510609
ABJ1512409
ABJ1512609
ABJ1514409
ABJ1514609
ABJ1516409
ABJ1516609
1.23 N
ABJ1410409
ABJ1410609
ABJ1412409
ABJ1412609
ABJ1414409
ABJ1414609
ABJ1416409
ABJ1416609
Pin plunger
1.96 N
ABJ2410609
0.39 N
ABJ2412409
Hinge lever
0.64 N
ABJ2412609
0.39 N
ABJ2414409
Simulated roller lever
0.64 N
ABJ2414609
0.39 N
ABJ2416409
Roller lever
0.64 N
ABJ2416609
AgNi alloy + Au clad
Mounting hole 1.2 mm type
Mounting hole 2.3 mm type
Solder terminal
ABJ2410419
Operating force
Actuator
Max.
Solder terminal
ABJ1410419
ABJ1410619
ABJ1412419
ABJ1412619
ABJ1414419
ABJ1414619
ABJ1416419
ABJ1416619
PC board terminal
ABJ1510419
ABJ1510619
ABJ1512419
ABJ1512619
ABJ1514419
ABJ1514619
ABJ1516419
ABJ1516619
1.23 N
Pin plunger
1.96 N
ABJ2410619
0.39 N
ABJ2412419
Hinge lever
0.64 N
ABJ2412619
0.39 N
ABJ2414419
Simulated roller lever
0.64 N
ABJ2414619
0.39 N
ABJ2416419
Roller lever
0.64 N
ABJ2416619
2-(1). Immersion protected type (Bottom wire leads type)
Mounting hole 1.2mm type
AgNi alloy
Mounting hole 1.2 mm type
SPST-NC
Operating force
Actuator
Max.
SPDT
SPST-NO
1.23 N
ABJ1610409
ABJ1610609
ABJ1612409
ABJ1612609
ABJ1614409
ABJ1614609
ABJ1616409
ABJ1616609
ABJ1620409
ABJ1620609
ABJ1622409
ABJ1622609
ABJ1624409
ABJ1624609
ABJ1626409
ABJ1626609
ABJ1630409
ABJ1630609
ABJ1632409
ABJ1632609
ABJ1634409
ABJ1634609
ABJ1636409
ABJ1636609
Pin plunger
1.96 N
0.39 N
Hinge lever
0.64 N
0.39 N
Simulated roller lever
0.64 N
0.39 N
Roller lever
0.64 N
Mounting hole 2.3mm type
AgNi alloy + Au clad
Mounting hole 1.2 mm type
SPST-NC
Operating force
Actuator
Max.
SPDT
SPST-NO
1.23 N
ABJ1610419
ABJ1610619
ABJ1612419
ABJ1612619
ABJ1614419
ABJ1614619
ABJ1616419
ABJ1616619
ABJ1620419
ABJ1620619
ABJ1622419
ABJ1622619
ABJ1624419
ABJ1624619
ABJ1626419
ABJ1626619
ABJ1630419
ABJ1630619
ABJ1632419
ABJ1632619
ABJ1634419
ABJ1634619
ABJ1636419
ABJ1636619
Pin plunger
1.96 N
0.39 N
Hinge lever
0.64 N
0.39 N
Simulated roller lever
0.64 N
0.39 N
Roller lever
0.64 N
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
ABJ1,2,3,4,5
Mounting hole 2.3mm type
AgNi alloy
Mounting hole 2.3 mm type
SPST-NC
Operating force
Max.
Actuator
Pin plunger
SPDT
SPST-NO
1.23 N
1.96 N
0.39 N
0.64 N
0.39 N
0.64 N
0.39 N
0.64 N
ABJ2610409
ABJ2610609
ABJ2612409
ABJ2612609
ABJ2614409
ABJ2614609
ABJ2616409
ABJ2616609
ABJ2620409
ABJ2620609
ABJ2622409
ABJ2622609
ABJ2624409
ABJ2624609
ABJ2626409
ABJ2626609
ABJ2630409
ABJ2630609
ABJ2632409
ABJ2632609
ABJ2634409
ABJ2634609
ABJ2636409
ABJ2636609
Hinge lever
Simulated roller lever
Roller lever
AgNi alloy + Au clad
Actuator
Mounting hole 2.3 mm type
SPST-NC
Operating force
Max.
SPDT
SPST-NO
1.23 N
1.96 N
0.39 N
0.64 N
0.39 N
0.64 N
0.39 N
0.64 N
ABJ2610419
ABJ2610619
ABJ2612419
ABJ2612619
ABJ2614419
ABJ2614619
ABJ2616419
ABJ2616619
ABJ2620419
ABJ2620619
ABJ2622419
ABJ2622619
ABJ2622419
ABJ2624619
ABJ2626419
ABJ2626619
ABJ2630419
ABJ2630619
ABJ2632419
ABJ2632619
ABJ2634419
ABJ2634619
ABJ2636419
ABJ2636619
Pin plunger
Hinge lever
Simulated roller lever
Roller lever
Mounting hole 3mm type (Leaf lever type)
AgNi alloy
Mounting hole 3 mm type
SPST-NC
Operating force
Actuator
Max.
SPDT
SPST-NO
ABJ3638409
ABJ3638609
0.98 N
1.27 N
ABJ3618409
ABJ3618609
ABJ3628409
Leaf lever
ABJ3628609
AgNi alloy + Au clad
Actuator
Mounting hole 3 mm type
SPST-NC
Operating force
Max.
SPDT
SPST-NO
ABJ3638419
ABJ3638619
0.98 N
1.27 N
ABJ3618419
ABJ3618619
ABJ3628419
Leaf lever
ABJ3628619
2-(2). Immersion protected type (Side wire leads type)
Fixed pin (right side pin) type
AgNi alloy
Wire leads type
Operating force
Actuator
Max.
Wire leads direction
SPST-NC
ABJ472840
ABJ482840
ABJ472860
ABJ482860
SPST-NO
ABJ473840
—
1.27 N
Right
Left
1.27 N
Leaf lever
1.76 N
Right
Left
ABJ473860
—
1.76 N
AgNi alloy + Au clad
Wire leads type
Operating force
Actuator
Max.
Wire leads direction
SPST-NC
ABJ472841
ABJ482841
ABJ472861
ABJ482861
SPST-NO
ABJ473841
—
1.27 N
Right
Left
1.27 N
Leaf lever
1.76 N
Right
Left
ABJ473861
—
1.76 N
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
ABJ1,2,3,4,5
Fixed pin (left side pin) type
AgNi alloy
Wire leads type
Operating force
Max.
Actuator
Wire leads direction
SPST-NC
ABJ572840
ABJ582840
ABJ572860
ABJ582860
SPST-NO
ABJ573840
—
1.27 N
1.27 N
1.76 N
1.76 N
Right
Left
Leaf lever
Right
Left
ABJ573860
—
AgNi alloy + Au clad
Actuator
Wire leads type
Operating force
Max.
Wire leads direction
SPST-NC
ABJ572841
ABJ582841
ABJ572861
ABJ582861
SPST-NO
ABJ573841
—
1.27 N
1.27 N
1.76 N
1.76 N
Right
Left
Leaf lever
Right
Left
ABJ573861
—
Mounting hole 3mm type
AgNi alloy
Wire leads type
SPST-NC
Operating force
Max.
Actuator
Wire leads direction
Left
1.27 N
1.76 N
ABJ382840
ABJ382860
Leaf lever
AgNi alloy + Au clad
Actuator
Wire leads type
SPST-NC
Operating force
Max.
Wire leads direction
Left
1.27 N
1.76 N
ABJ382841
ABJ382861
Leaf lever
3. Immersion protected type (Bottom wire leads type) Long stroke type
Mounting hole 2.3mm type
AgNi alloy
Mounting hole 2.3 mm type
SPST-NC
Operating force
Actuator
Max.
SPDT
SPST-NO
Pin plunger (Horizontal)
AgNi alloy + Au clad
2.45 N
*ABJ261L70
ABJ262L70
ABJ263L70
Mounting hole 2.3 mm type
SPST-NC
Operating force
Max.
Actuator
SPDT
SPST-NO
Pin plunger (Horizontal)
2.45 N
*ABJ261L71
ABJ262L71
ABJ263L71
SPECIFICATIONS
1. Contact rating
Type
Operating force Max.
1.76 N, 1.96 N
Standard rating
Low-level circuit rating
—
2 A 125 V AC
2 A 30 V DC
AgNi alloy contact
1 A 125 V AC
1 A 30 V DC
1.23 N, 1.27 N
2.45 N
—
—
Long stroke type
AgNi alloy contact
1 A 125 V AC
1 A 30 V DC
5 mA 6 V DC
2 mA 12 V DC
1 mA 24 V DC
1.23 N, 1.27 N
1.76 N, 1.96 N
AgNi alloy + Au clad contact
0.1 A 125 V AC
5 mA 6 V DC
2 mA 12 V DC
1 mA 24 V DC
Long stroke type
AgNi alloy + Au clad contact
0.1 A 125 V AC
0.1 A 30 V DC
2.45 N
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
ABJ1,2,3,4,5
2. Characteristics
Leaf lever, Long stroke type
Wire leads (right & left side type) Min. 3×105 (at 60 cpm)
Min. 5×105 (at 60 cpm)
Mechanical life
(O.T.: Specified value)
Other types
Min. 106 (at 60 cpm)
AgNi alloy contact type
AgNi alloy + Au clad contact type Min. 105 (at 20 cpm)
Min. 3×104 (at 20 cpm)
Electrical life at rated load
(O.T.: max.)
Insulation resistance
Dielectric strength
Between non-continuous terminals
Min. 100 MΩ (at 500 V DC insulation resistance meter)
600 Vrms
Between each terminal and other exposed metal parts
Between each terminal and ground
1,500 Vrms
1,500 Vrms
Vibration resistance (Pin plunger type)
Shock resistance (Pin plunger type)
10 to 55 Hz at single amplitude of 0.75 mm (Contact opening max. 1 msec.)
Min. 294 m/s2{30 G} (Contact opening max. 1 msec.)
Dust protected type (IP50): Max. 50 mΩ
Immersion protected type (IP67): Max. 100 mΩ
(By voltage drop 1 A 6 to 8 V DC)
Silver contact type
Contact resistance (Initial)
Dust protected type (IP50): Max. 100 mΩ
Immersion protected type (IP67): Max. 150 mΩ
(By voltage drop 0.1 A 6 to 8 V DC)
Gold clad contact type
Allowable operating speed (at no load)
Max. operating cycle rate (at no load)
1 to 500 mm/sec.
Other type: 120 cpm
Long stroke type: 60 cpm
Ambient temperature
Unit weight
–40°C to +85°C
Approx. 0.5 g (IP50 type)
3. Operating characteristics
Movement
differential,
Max. mm
Operating force,
Max.
Release force,
Min
Pretravel,
Max. mm
Overtravel,
Min. mm
Operating position,
mm
Type of actuator
Mounting hole: 1.2
5.5 0.2
Mounting hole: 2.3
7.0 0.2
1.23N
1.96N
0.39N
0.64N
0.39N
0.64N
0.39N
0.64N
0.98N
0.15N
0.25N
Pin plunger
0.6
3.0
3.0
0.12
0.5
0.25
0.5
Mounting hole: 1.2
6.8 1.0
Mounting hole: 2.3
8.3 1.0
0.029N
0.049N
0.029N
0.049N
0.029N
0.049N
0.20N
Hinge lever
Mounting hole: 1.2
9.8 1.0
Mounting hole: 2.3
11.3 1.0
Simulated roller lever
Roller lever
0.5
0.5
Mounting hole: 1.2
13.1 1.0
Mounting hole: 2.3
14.6 1.0
3.0
6.0
2.6
0.5
1.0
0.5
0.5
2.5
1.4
Mounting hole: 3.0
16.0 2.0
Fixed pin type
10.7 0.7
Mounting hole: 3.0
16.25 0.7
1.27N
1.76N
0.22N
0.26N
Leaf lever
Fixed pin type
10.7 0.7
Mounting hole: 3.0
16.25 0.7
2.6
0.5
1.4
Mounting hole: 3.0
16.0 2.0
1.27N
2.45N
0.29N
0.20N
6.0
—
1.0
0.5
2.5
2.0
Long stroke type
2.5 0.4
Note: The O.P. differs between the 1.2 mm and 2.3 mm dia. installation hole types.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
ABJ1,2,3,4,5
mm General tolerance: 0.25
DIMENSIONS
1. Dust protected type
1-(1) PC board terminal
Mounting hole 1.2 mm type
Pin plunger
1.2 0.05 dia.
1.5 dia
5.4 0.3
Pretravel 0.6Max.
Operating Position
5.5 0.2
1.0
5.08 0.1
5.08 0.1
5.0 0.15
1.1 0.12
Pretravel, Max. mm
0.6
5.50
+0.12
2
-0
dia.
1.5 0.1
0.9
Movement differential, Max. mm
Overtravel, Min. mm
0.12
0.25
1.5 0.12
1.6
t=0.4
1.25 0.12
6-C 0.3
6.5 0.1
Distance from mounting
5.5 0.2
7 0.3
5.08 0.15 5.08 0.15
12.8 0.15
hole, mm
Operating
position
4.4
6
Distance from stand-off,
mm
Hinge lever
8.6
4.4 0.4
1.2 0.05 dia.
3
Pretravel 3.0Max.
R13.3
5.08 0.1
5.08 0.1
Operating Position
6.8 1.0
4.2
8.3 1.2
Pretravel, Max. mm
3.0
0.5
0.5
Movement differential, Max. mm
Overtravel, Min. mm
Distance from mounting
hole, mm
6.8 1.0
8.3 1.2
Operating
position
Distance from stand-off,
mm
Simulated roller lever
3.3 0.4
1.2 0.05 dia.
Pretravel 3.0Max.
3
R13.2
R2.5
5.08 0.1
5.08 0.1
Operating Position
9.8 1.0
Pretravel, Max. mm
3.0
0.5
0.5
Movement differential, Max. mm
Overtravel, Min. mm
11.3 1.2
Distance from mounting
hole, mm
9.8 1.0
Operating
position
Distance from stand-off,
mm
11.3 1.2
Roller lever
2.2
Pretravel 3.0Max.
3.4 0.4
1.2 0.05 dia.
R13.8
4.8 dia.
Operating Position
13.1 1.0
5.08 0.1
5.08 0.1
14.6 1.2
Pretravel, Max. mm
3.0
0.5
0.5
Movement differential, Max. mm
Overtravel, Min. mm
Distance from mounting
hole, mm
13.1 1.0
14.6 1.0
Operating
position
Distance from stand-off,
mm
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
ABJ1,2,3,4,5
1-(2) Solder terminal
Pin plunger
mm General tolerance: 0.25
Mounting hole: 1.2 mm
Mounting hole: 2.3 mm
1.5 dia
4.6 0.3
5.4 0.3
Pretravel 0.6Max
1.5 dia
Pretravel 0.6Max.
Operating Position
5.5 0.2
Operating Position
5
0.15
1.5
+0.1
-.05
2.4
6.5 0.15
7
0.2
1.0
5.7
5
1.7
1.5 0.1
1.5
2
+0.12
2-1.2
dia.
-0
0.4
6-C 0.3
1.2
2.2
6.5 0.1
+0.1
0.4
2.4
dia.
-0.05
0.5
5.08 0.15 5.08 0.15
12.8 0.15
4.4
6
1.2
6
2.2
4.8 0.1
6
5.08 0.15
5.08 0.15
12.8 0.15
Remarks: Dimensions of the actuator type are the same as corresponding PC board terminal types.
2. Immersion protected type
2-(1) Bottom wire leads type
Pin plunger
Mounting hole: 1.2 mm
Mounting hole: 2.3 mm
13.9
6.5 0.15
7.50
8.2
COM
N.O.
N.C.
Thickness of the lead
wire: 0.3 mm2
Thickness of the lead
wire: 0.3 mm2
UL/CSA approved type:
AWG22
UL/CSA approved type:
AWG22
300 10
300 10
Color of the lead wire:
COM...Black
Color of the lead wire:
COM ...Black
N.C. ...Red
N.O. ...White
N.C. ....Red
N.O. ...White
5
2
5
2
13.9 0.4
6
Remarks: 1. As for M1.2 type, other dimensions are the same as those of corresponding PC board terminal types.
As for M2.3 type, other dimensions are the same as those of corresponding solder terminal types.
2. Dimensions of the actuator type are the same as corresponding PC board terminal types.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
ABJ1,2,3,4,5
mm General tolerance: 0.25
Leaf lever
Mounting hole: 3 mm
Pretravel 6 max.
R2.5
9
5
13 0.1
8.6 1
2.5
4.8 0.3
Free Position
(19.0)
Operating Position
(16 2)
3.1+0.1
–0.05
5
Totaltravel Position
(11.5 min.)
3.3
9.25
7.5
6.5
+0
4.4
3
dia.
–0.15
R3.25
300 10
Pretravel, Max. mm
6.0
1.0
2.5
Movement differential,
Max. mm
5 2
Overtravel, Min mm
Distance from
mounting hole,
mm
6
Operating
position
16.0 2.0
20.0 0.4
2-(2) Side wire leads type
Fixed pin type
Right side pin type
Right wire leads type
9.53 0.1
2.2 0.05 dia.
2.6 0.05
C0.2
5.0+0.0
−0.2
6.7
6.0
5.0
R2.0
9.53
7.6 1.0
6.9 0.3
3.45
Pretravel, Max. mm
2.6
0.5
1.4
Movement differential,
Max. mm
2.6 0.05
8.55
Overtravel, Min mm
Distance from
mounting hole,
mm
Operating
position
5 2
10.7 0.7
16.65
300 10
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
ABJ1,2,3,4,5
Right side pin type
Left wire leads type
mm General tolerance: 0.25
9.53 0.1
2.2 0.05 dia.
2.6 0.05
C0.2
5.0+0.0
−0.2
6.7
6.0
5.0
R2.0
9.53
7.6 1.0
6.9 0.3
3.45
Pretravel, Max. mm
2.6
0.5
1.4
Movement differential,
Max. mm
2.6 0.05
8.55
Overtravel, Min mm
Distance from
mounting hole,
mm
5 2
Operating
position
10.7 0.7
300 10
16.65
Left side pin type
Right wire leads type
9.53
2.6 0.05
C0.2
2.2 0.05 dia.
9.53 0.1
5.0+0.0
−0.2
6.7
6.0
5.0
R2.0
7.6 1.0
6.9 0.3
3.45
8.55
Pretravel, Max. mm
2.6
0.5
1.4
Movement differential,
Max. mm
2.6 0.05
Overtravel, Min mm
Distance from
mounting hole,
mm
5 2
Operating
position
10.7 0.7
16.65
300 10
Left side pin type
Left wire leads type
9.53
2.6 0.05
C0.2
2.2 0.05 dia.
9.53 0.1
5.0+0.0
−0.2
6.7
6.0
5.0
R2.0
7.6 1.0
6.9 0.3
3.45
8.55
Pretravel, Max. mm
2.6
0.5
1.4
Movement differential,
Max. mm
2.6 0.05
Overtravel, Min mm
5 2
Distance from
mounting hole,
mm
Operating
position
300 10
16.65
10.7 0.7
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
ABJ1,2,3,4,5
mm General tolerance: 0.25
Mounting hole 3mm type
C0.30
8.4+0.1
6.0+0.2
5.0
−0.3
R2.0
−0.15
5.8 1.0
12.3
1.85 0.3
3.1+0.1
−0
Pretravel, Max. mm
2.6
0.5
1.4
9.0
3.0+0
dia.
−0.1
Movement differential,
Max. mm
3.3
6.0
Overtravel, Min mm
Distance from
mounting hole,
mm
5 2
13.0 0.1
19.6
Operating
position
4.0
16.25 0.7
300 10
3. Immersion protected type (Bottom wire leads type) Long stroke type
Mounting hole: 2.3 mm
Free position (F.P.)
3.2 max.
16.7
12.8
9.0
6.0
4.95
Operating position (O.P.)
2.5 0.4
1.0
2.0 dia.
3.0+0.
−0.15
dia.
6.0 0.15
2.4+0.1
8.1
8.2
−0.05
19.4
C0.6
2.5 0.1
2.4+0.1
dia.
−0.05
4.8 0.1
300 10
5 2
Movement differential,
Max. mm
0.5
COM
NO
NC
Overtravel, Min mm
Operating position
2.0
13.9 0.4
2.5 0.4
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
|