ORDER NO. CPD0604067C1
Personal Computer
CF-T4
This is the Service Manual for
the following areas.
M …for U.S.A. and Canada
Model No. CF-T4HWETZBM
© 2006 Matsushita Electric Industrial Co., Ltd. All rights reserved.
Unauthorized copying and distribution is a violation of law.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Specifications
Main Specifications
®
®
*
Intel Pentium M Processor Ultra Low Voltage 753 (1.20 GHz, 2 MB 1 L2 cache, 400
CPU/
Secondary cache memory
MHz FSB)
®
Chip Set
Intel 915 GMS Express chip set
*
*
1
512 MB , DDR2 SDRAM (1024 MB 1 Max.)
Main Memory
*
*2
UMA (128 MB 1 Max.)
Video Memory
*3
Hard Disk Drive (Replaceable)
Display Method
60 GB
12.1 XGA type (TFT) (1024 × 768 dots)
*
65,536/16,777,216 colors (1024 × 768 dots) 4
Internal LCD Display
65,536/16,777,216 colors (800 × 600 dots/1024 × 768 dots/1280 × 768 dots/1280 ×
1024 dots/1600 × 1200 dots/2048 × 1536 dots)
*
External Display 5
Simultaneous Display on LCD + Exter-
*
65,536/16,777,216 colors (800 × 600 dots, 1024 × 768 dots) 4
*
nal Display 5
®
Wireless LAN
Built-in Intel PRO/Wireless 2915 ABG
*
LAN 6
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
Modem
Sound
Data: 56 kbps(V.92) FAX: 14.4 kbps
WAVE and MIDI playback, Monaural Speaker (built in)
PC Card Slot × 1: (One Type I or Type II, Allowable current 3.3 V: 400 mA, 5 V: 400 mA)
Card Slots
*
SD Memory Card Slot 7 × 1
*
DDR2 SDRAM, 172-pin, 1.8 V, Micro DIMM, PC2-3200 Compliant 8
RAM Module Slot
*
*
6
USB Ports × 2 ( USB2.0 × 2 ) 9 / Modem Port ( RJ-11 ) / LAN Port ( RJ-45 )
/
External Display Port: Mini Dsub 15-pin female / Microphone Jack: Miniature jack, 3.5
DIA / Headphone Jack: Miniature jack, 3.5 DIA / Mini Port Replicator connector: Dedi-
cated 50-pin male
Interface
Keyboard/Pointing Device
Power
83 keys/Touch Pad/Touchscreen (stylus (included) touch capable)
AC adaptor or Battery pack
Input: 100 V - 240 V AC, 50 Hz/60 Hz
Output: 16 V DC, 2.5 A
*
AC Adaptor 10
Battery Pack
Li-ion 11.1 V, 7.65 Ah
*
*
*
Operating Time 11
Approx. 6 hours -12 hours 12 (Approx. 8 hours 13) (Disable Economy mode (ECO))
*
Charging Time 14
Approx. 5 hours (Power off)/Approx. 7 hours (Power on)
*
*
Power Consumption 15
Approx. 35 W 16 / Approx. 40 W (maximum when recharging in the ON state)
• Including protrusion of the hand strap
268 mm × 28.1 mm(at the front)/66.9 mm (at the rear) × 210 mm
{10.6 " × 1.1 " /2.7 " × 8.3 "}
• Excluding protrusion of the hand strap
Physical Dimensions (W × H × D)
(excluding the stylus holder)
268 mm × 28.1 mm(at the front)/49.1 mm (at the rear) × 210 mm
{10.5 " × 1.1 " /2.0 " × 8.3 "}
*
Weight 17
Approx. 1520 g {3.4 lb.} (including the stylus)
Temperature
5°C to 35°C {41°F to 95°F}
Operation
Humidity
30% to 80% RH (No condensation)
-20°C to 60°C {-4°F to 140°F}
30% to 90% RH (No condensation)
Environment
Temperature
Storage
Humidity
®
®
Microsoft Windows XP Professional with Service Pack 2 with Advanced Security
Technologies (NTFS File system)
*
OS 18
®
®
®
Microsoft Internet Explorer 6 Service Pack 2 / DirectX 9.0 c / Microsoft Windows
®
®
®
Media Player 10 / Microsoft Windows Movie Maker 2.1 / Microsoft .NET Framework
®
1.1 / Adobe Reader / Intel PROSet/Wireless Software / SD Utility / Icon Enlarger /
Loupe Utility / Touch Pad Utility / DMI Viewer / PC Information Viewer / Display Rotation
Tool / Hotkey Settings / Wireless LAN Switch Utility / Economy Mode (ECO) Setting Util-
*
Pre-installed Software 18
20
ity / Battery Recalibration Utility / Infineon TPM Professional Package*
*
*
19
Setup Utility / Hard Disk Data Erase Utility 19 / Hard Disk Backup Utility
10
Download from Www.Somanuals.com. All Manuals Search And Download.
*1
*2
1 MB = 1,048,576 bytes
A segment of the main memory is allotted automatically depending on the computer’s operating status. The size of the Video
Memory cannot be set by the user.
*3
*4
*5
*6
*7
1 GB = 1,000,000,000 bytes. Operating system or some application software will report as fewer GB.
A 16,777,216 color display is achieved by using the dithering function.
Display may be impossible using some connected external displays.
Some devices cannot be used depending on the port type.
Operation has been confirmed for Panasonic SD memory cards with up to 2 GB capacity. The transfer rate using the SD memory
card slot on this computer is 8 MB per second (this is a theoretical value, and differs from actual speeds). The transfer rate is 8
MB per second even if you use an SD memory card that supports high-speed transfer rates. Does not guarantee connection/
operation of all SD devices. Does not support MultiMedia card. Do not insert MultiMedia card.
*8
Only a RAM module designed for DDR2 (PC2-3200) can be added (Panasonic : CF-BAV0256U / CF-BAV0512U).
JEDEC standard 214 pin Micro DIMM cannot be used. PC2100 / PC2700 172 pin Micro DIMM cannot be used.
*9
Does not guarantee operation of all USB-compatible peripherals.
<Only for North America>
*10
The AC adaptor is compatible with power sources up to 240
V
AC adaptor. This computer is supplied with a 125
V
AC compatible AC cord.
*11
Varies depending on the usage conditions, CPU speed, etc. Measured value when the power saving function on the USB2.0 USB
Root Hub is set to on. (At the time of purchase, the power saving function is set to off.
When Economy Mode (ECO) is enabled, the operating time becomes approximately 20% shorter than when it is disabled.
*12
*13
*14
Measured using BatteryMark™ Version 4.0.1 (LCD brightness : Maximum - Minimum).
Measured using MobileMark™ 2002 (LCD brightness : 60 cd/m2).
Varies depending on the usage conditions, CPU speed, etc.
It may take a long time to charge a fully discharged battery.
*15
*16
*17
*18
*19
*20
Approx. 1.5 W when the battery pack is fully charged (or not being charged) and the computer is off.
Rated power consumption.
Average value. May differ depending on models.
Operations of this computer are not guaranteed except for the pre-installed OS.
The Product Recovery DVD-ROM is required.
For information on TPM, input [c:\util\drivers\tpm\README.pdf] in [start] - [Run] and refer to the installation manual of “Trusted
Platform Module (TPM)”. You need to install Infineon TPM Professional Package to use TPM.
Wireless LAN
*
IEEE802.11a: 54/48/36/24/18/12/9/6 Mbps(automatically switched) 21
*
IEEE802.11b: 11/5.5/2/1 Mbps(automatically switched) 20
Data Transfer Rates
*
IEEE802.11g: 54/48/36/24/18/12/9/6 Mbps(automatically switched) 21
Standard Supported
Transmission Method
IEEE802.11a/IEEE802.11b/IEEE802.11g
OFDM system, DS-SS system
IEEE802.11a: Channels 36/40/44/48/52/56/60/64/149/153/157/161/165
IEEE802.11b/ IEEE802.11g: Channels 1 to 11
Wireless Channels Used
RF Frequency Band
IEEE802.11a: 5.18 - 5.32 GHz, 5.745 - 5.825 GHz
IEEE802.11b/ IEEE802.11g: 2412 - 2462 MHz
*21
These are speeds specified in IEEE802.11a+b+g standards. Actual speeds may differ.
10-1
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Names and Function of Parts
Names
A
B
Function key
Keyboard
I
Display (internal LCD/Touchscreen)
J
K
L
Speaker
C LEDs
LAN Port
Modem Port
D Touch pad
E
F
Power switch/Power indicator
Wireless LAN switch
M Security lock
WIRELESS LAN
M USB Ports
G Economy-mode (ECO) indicator
H Battery indicator
ECO
O Wireless LAN Antenna (built-in)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Names
A
B
DC-IN Jack
H Microphone Jack
External Display Port
I
Headphone Jack
RAM Module Slot
Latch
C Mini Port Replicator Connector
D SD Memory Card Slot
EXT.
J
K
L
E
F
PC Card Slot
Hand strap
SD Memory Card Indicator
M Latch
G Latch
N
Battery Pack
11-1
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Diagnosis & Repair
4.1. Basic Procedures
12
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2. Troubleshooting
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
ServerBIOS2 test error: Cannot write to extended DMA (Direct Memory Access) registers.
ServerBIOS2 test error: Cannot generate software NMI (Non-Maskable Interrupt).
ServerBIOS2 test error: Fail-Safe Timer takes too long.
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3. ConnectionDiagram
Connection by Cable
Connection Cable
1
2
3
4
5
6
7
8
9
LCD/TP Cable
DFJS963ZA
DFJS962ZA
Direct connection Connectors
Parts on Bottom Side
Speaker Cable
Antenna PCB-L
Antenna PCB-R
Modem Cable
LAN Cable
N1ZYYY000002
N1ZYYY000003
DFJS973ZA
DFJS958ZB
PAD FFC
HDD FPC Unit
DC-IN Cable
DFJK12U112BB
DL3UP1443AAA
DFJS961ZB
10 Main-Sub Cable
DFJS980ZA
Antenna Board
(R)
1
LCD/Touch Panel
4
LCD Back Light
2
Wireless
LAN Module
Keyboard
Battery Pack
Speaker
3
Antenna Board
(L)
Inverter Board
CN601
CN26
CN10
VGA
CN15
CN4
Main Board
CN19
HDD
CN11
CN600
8
CN12
CN2
9
CN24
DC-IN
10
CN22
CN18
CN23
5
CN1051
MODEM
CN1053
USB
CN13
SD Card
CN1052
USB
CN14
CN16
JK2
CN3
CN21
JK1
PCMCIA
SLOT
SW6
POWER SW
Lithium Battery
Headphone
6
Mic
7
DIMM memory
(Option)
LAN
Touch Pad
CF-BAV0256U
CF-BAV0512U
19
Download from Www.Somanuals.com. All Manuals Search And Download.
4.4. Power-on Self Test (Boot Check)
4.4.1. Outline of POST
4.4.2. Error Diagnosis by Checking Beep Signal Sound
20
Download from Www.Somanuals.com. All Manuals Search And Download.
4.4.3. Diagnosis by Error Code
Error code
Message
Error Description
Possible faulty part
0200
Failure Fixed Disk
Fixed disk in not working or not configured properly.
Run the Setup Utility and check that the hard disk
capacity is displayed at [Primary Master].
HDD
Main board
If the [None] is displayed, disk error is occurred.
0211
0212
0230
Keyboard error
Keyboard not working. Confirm the keyboard is connected Keyboard
to the computer and that a key is not being held down.
Keyboard Controller Failed Keyboard controller failed test.
May require replacing keyboard controller.
System RAM Failure
at offset : nnnn
Main board
System RAM failure at offset nnnn of the 64k block at
which the error was detected. If you installed RAM module,
remove the RAM module and reinstall it.
Main board
0231
Shadow RAM Failure
at offset : nnnn
Shadow RAM failure at offset nnnn of the 64k block at
which the error was detected. If you installed RAM module,
remove the RAM module and reinstall it.
Main board
0232
0250
0251
Extended RAM Failure
at offset : nnnn
No battery on the system CMOS backup battery exhausted.
Battery replacement is required.
Extended memory not working or not configured properly Main board
at offset nnnn. Extension memory
Lithium battery
System CMOS checksum System CMOS has been corrupted or modified incorrectly, Incorrect Setup
bad
-Default configuration used stored in CMOS.
The BIOS installed Default SETUP Values. If you do not
perhaps by an application program that changes data
Lithium battery
want these values, enter Setup and enter your own values.
If the error persists, check the system battery or contact
Panasonic.
0260
0270
0271
System timer error
Real time clock error
Check date and time
settings
The timer test failed. Requires repair of system board.
Real-time clock fails BIOS test. May require board repair. Main board
Incorrect date and time on the system.
Set the correct date and time using the setup utility.
Main board
Incorrect Setup
0280
Previous boot incomplete Previous POST did not complete successfully.
-Default configuration used POST loads default values and offers to run Setup.
If the failure was caused by incorrect values and not
Boot-up failure
corrected, the next boot will likely fail.
02D0
02F5
System cache error
-Cache disabled
DMA Test Failed
CPU trouble.
Main board
Main board
Server BIOS2 test error: Cannot write to extended DMA
21
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Self Diagnosis Test
1. Floppy disk is included for the self-diagnostic tests that should be performed before using this product.
2. Connect External Floppy Disk Drive (FDD) to USB port for diagnosis test.
Important notice
System password
This product has a password function. If this function is turned on, the self-diagnostics tests will not work.
You will need ask the user for the password before performing the self-diagnostics.
5.1. Outline of Self Diagnostic Tests
Insert the diagnostics floppy disk
● Starting up the setup utility
① Turn on the power.
② When "Panasonic Press F2 to enter setup" appears
on the screen, press F2.
ꢀ
③ Press "→" to select 「Exit」
④ Press "↓" to select 「Get default value」
⑤ Press Enter.
Return the setup
contents to default
⑥ Choose Yes for "Load default Configuration now?"
⑦ Select "Save Values & Exit" and press Enter.
⑧ Choose Yes for "Save Configuration changes and exit now?"
and press Enter.
● Menu Screen 1
Choose test from
the menu screen
to start the test.
1. DIAG on FD
2. LAN test
3. SD I/F test
4. Modem test
Caution:
5. Wireless LAN test (Wireless LAN Model only)
Q. Quit
ꢀ
After completing repairs, be sure
to carry out the Automatic test
and Peripheraltest.
Select please [1, 2, 3, 4, 5, Q]?
<Automatic test>
<Peripheral test>
<Test selection>
Tests selected (O) from the test The parallel devices can be tested. Specifc tests required can
item list will be performed in
succession.
be freely selected and
performed from the test item
list.
2. LAN test
3. SD I/F test
1. DIAG on FD
4. Modem test
5. Wireless LAN test
(Wireless LAN Model only)
Be sure to carry out the Selection
test only when necessary.
Problems in the unit are located and divided according
to error messages that occur during testing.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
1. DIAG on FD
2. LAN test
3. SD I/F test
4. Modem test
5. Wireless LAN test (Wireless LAN Model only)
Q. Quit
Select please [1, 2, 3, 4, 5, Q]?
menu screen
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
1. DIAG on FD
2. LAN test
3. SD I/F test
4. Modem test
5. Wireless LAN test (Wireless LAN Model only)
Q. Quit
Select please [1, 2, 3, 4, 5, Q]?
menu screen
2. When A:\DIAG appears, input "JDG_T4H, EXE" and press Enter.
Download from Www.Somanuals.com. All Manuals Search And Download.
Order of test flow selection
Input screen startup
1. Reading the test conditions settings file
If the test condition settings
file is not read, this means
the test program is not running correct.ly.
Press "ALT" and "F".
Press "L".
2
3
4
Press "ALT" and "O".
Press Ente. r
2. setting the test items
Press "ALT" and "S".
[ Saving selected test items ]
2
3
4
If you change the file name when
saving the file in step , you can
6
create test condition settings for
custom test items.
Example:
Press "S".
Choose the test item and press En.ter
Choose the test whose settings are
to be changed, press "A" for Additional
and "R" for Erase.
CF-T4 .
TEST1.
All initial values are "0" so set
tests other than the necessary ones to "1".
Press "O" twice to return the menu screen.
* * *
* * *
5
6
To save the selected list, press "ALT" and "F" at the file menu.
Starting the test
Press "ALT" and "R".
Press "R".
This will start the test.
End of test
26
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Disassembly instructions
6.1. Disassembly Flow Chart
Main Unit
6.2.1.
Preparation
1. End the Windows.
2. Turn off the power, and then remove the AC adaptor or battery pack.
3. Remove any optional DIMM memory cards or PCMCIA cards.
4. Remove any other peripherals or connected devices.
6.2.2.
6.2.3.
Keyboard
Top Case
HDD
6.2.4.
6.2.5.
6.2.6.
Touch Pad
LCD Knob /Speaker
6.2.8.
6.2.7.
Main Board
USB Board
6.2.9.
6.2.10.
6.2.11.
6.2.12.
Card Bus Ejector
Antenna Board
(L, R) / DC-IN
Wireless LAN Module
MODEM
Display Unit
Main replaceable parts
6.2.13.
6.2.1.
Battery Pack
DIMM Cover
AC Adaptor
Keyboard
HDD
HDD Case
Top Case
Side Cover (R)
Touch Pad
Pad Cover
PAD Button
PAD FPC
LCD Knob
Speaker
USB Board
USB Cable
6.2.8.
6.2.9.
Main Board
Antenna Board (L, R)
DC-IN Cable
LCD Unit
6.2.2.
6.2.3.
6.2.10. Wireless LAN Module
6.2.11. MODEM
6.2.12. Card Bas Ejector
6.2.13. LCD Unit
6.2.14. Hinge Cover
Hinge (L, R)
6.2.14.
6.2.15.
Hinge Cover
6.2.4.
6.2.5.
LCD Unit / LCD Rear
6.2.15. LCD Unit
LCD Rear
6.2.16.
LCD Front
Inverter
6.2.6.
6.2.7.
6.2.16. Inverter
LCD Cable
27
Download from Www.Somanuals.com. All Manuals Search And Download.
3. The LCD unit is opened up to about 90° by operating the
LCD knob.
6.2. Disassembly
6.2.1.
Preparation
4. Remove the 6 hooks (B).
5. Open the keyboard from LCD side and then turn it inside
out on the top case.
Attention:
Before disassembly, be sure to perform the following steps.
1. End the Windows.
Note:
It can remove with the keyboard hook plate.
2. Turn off the power and then remove the ACadaptor.
3. Slide the hooks (A) and then remove the battery pack.
Hook(B)
LCD Unit
4. Remove the screw (A) and then remove the DIMM cover.
(Remove if the DIMM memory is equipped with)
Screw (A) : XSB2+4FNL(N16)
Baattrey Pack
Hook(A)
Hook(B)
LCD Knob
Screw(A)
6. Remove the heat spreader from buttom of the keyboard.
7. Remove the keyboard FFCfrom the connector (CN15) and
then remove the keyboard.
DIMM Cover
Heat Spreader
6.2.2.
Removing the Keyboard
Preparation : perform the section 6.2.1. first.
1. Remove the 4 screws (B).
Screw(B):DXQT2+E12FNL(N11)
2. Remove the 2 keyboard hook plates, and then remove the
hook of back side of keyboard with screw driver.
KeyBoard
Keyboard Hook Plate
Screw(B)
Screw(B)
Screw(B)
Keyboard Hook Plate
CN15
28
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2.3.
Removing the HDD
6.2.4.
Removing the Top Case
Preparation : perform the section 6.2.1. 6.2.2. first.
1. Remove the 2 screws (C) and then remove the HDD cover.
Screw (C):DFHE5025XA(N501)
Preparation : perform the section 6.2.1. , 6.2.2. first.
1. Remove the 7 screws (D) and 5 screws (G).
Screw (D):DXHM0039ZA(N5)
Screw (G):DXHM0057ZA(N7)
Screw(C)
Screw(G)
Screw(D)
Screw(D)
HDD Cover
Tape
Screw(D)
Screw(D)
Screw(G)
Screw(G)
Screw(G)
Screw(G)
2. Lift up the HDD unit and remove FFCconnector and then
remove the HDD unit.
2. Remove the speaker cable from the connector (CN26).
3. Remove the side cover (R) as slide it to this side.
3. HDD is taken out of the HDD case.
Note:
4. Remove the 1 screw (J), 3 screws (K) and 2 screws (L) from
top case and then remove the top case.
Please do not bend pins of the HDD connector, at the
time of removing HDD and FFCconnector.
Screw(J):DXHM0056ZA(N6)
Screw(K):DXQT2+E6FNL(N12)
Screw(L):DXQT26+D8FCL(N15)
HDD Case
HDD
FFC Connector
Screw(L)
HDD FFC
HDD Unit
CN26
Speaker Cable
Screw(L)
Screw(K)
Screw(J)
Screw(K)
Screw(K)
Side Cover(R)
29
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Lift up the top case and remove the pad FFCand then
remove the top case.
6.2.5.
Removing the Touch Pad
Preparation : perform the section 6.2.1. , 6.2.2. and 6.2.4.
first.
1. Peel off the tape.
Top Case
2. Depress to center the 6 hooks of the pad cover, (D)(E)(F)
as order.
Tape
Hook(D)
Top Case
Pad FFC
Hook(F)
PAD FFC
Hook(E)
Hook(F)
3. Remove the hook (G) and remove the touch pad.
Pad Cover
Touch Pad
Pad Button
Hook(G)
Hook(G)
30
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2.6.
Removing the LCD Knob and the
Speaker
6.2.8.
Removing the Main Board
Preparation : perform the section 6.2.1. , 6.2.2. and 6.2.4.
first.
Preparation : perform the section 6.2.1. , 6.2.2. and 6.2.4.
first.
1. Remove the 1 screw (E), 1 screw (F), 2 screws (H) and 2
screws ( I ).
1. Remove the latch spring from the top case.
Screw (E):DXQT2+E10FNL(N10)
Screw (F):DXQT2+D4FNL(N9)
Screw (H):DFHE5035ZB(N2)
Screw ( I ):KIYE50000022(N500)
2. Remove the hook of the LCD knob from stopper rib of the
top case.
3. Peel off the tape of the speaker box.
4. Peel off the tape on the speaker and speaker ring and then
remove the speaker.
Speaker Box
Speaker
Speaker
Ring
Screw(H)
Screw(I)
Screw(E)
Screw(F)
2. Remove the 2 screws (N).
Screw (N):DXQT2+E6FNL(N13)
3. Remove the modem cable from the MDCmodem.
4. Remove the side cover(L) from the bottom case.
Latch
Spring
Side Cover(L)
LCD Knob
Antenna Board(L)
Location of the Spring
Screw(N)
Screw(N)
DC Jack
Holder
6.2.7.
Removing the USB Board
Modem Cable
Preparation : perform the section 6.2.1. , 6.2.2. and 6.2.4.
first.
Tape
1. Peel off the tape for clamp the USB cable.
2. Remove the connector (CN23) on the main board.
3. Remove the USB board from the bottom case.
CN23
Tape
Main Board
LAN Cable
USB Cable
2-Port USB Board
31
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Remove the DCjack holder on the DC-IN jack.
6.2.9.
Removing the Antenna Board (L,R)
and the DC-IN Cable
6. Remove the LCD cable connectors (CN10,CN11,CN24).
Preparation : perform the section 6.2.1. , 6.2.2. , 6.2.4. and
6.2.8. first.
1. Remove the antenna cable(L) from the main terminal and
the antenna cable(R) from the AUX terminal and then
remove the antenna board(L, R) from the bottom case.
LCD Cable
2. Remove the DC-IN cable(CN600) from the main board.
CN24
CN10
CN11
Antenna Board(L)
Antenna Cable(L)
DC-IN
Cable
CN600
7. Turn it to arrow and remove the lithium battery connector
(CN3), LAN cable connector (CN16) and HDD FPC
connector (CN4) and then remove the main board.
Antenna Cable(R)
Antenna Board(R)
Power Knob
LAN SW Knob
Tape
6.2.10. Removing the Wireless LAN
Module
Preparation : perform the section 6.2.1. , 6.2.2. , 6.2.4. and
6.2.8. first.
CN600
1. Peel off the tape on the wireless LAN module.
2. Open the wireless LAN module holding arms and remove
the wireless LAN module.
LAN
Cable
Tape
Lithium Battery
CN3
Wireless LAN Module
Cable
CN16
DC-IN Cable
Main Board
32
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2.11. Removing the MODEM
6.2.12. Removing the Card Bus Ejector
Preparation : perform the section 6.2.1. , 6.2.2. , 6.2.4. and
6.2.8. first.
Preparation : perform the section 6.2.1. , 6.2.2. , 6.2.4. and
6.2.8. first.
1. Remove the 2 screws (O).
1. Remove the 1 screw (P) from connection side of wireless
LAN.
Screw (O):DXQT2+D25FNL(N8)
Screw(P):DFHE5025XA(N1)
2. Remove the MODEM from main board connector (CN18)
as vertical.
Screw(P)
Screw (O)
Screw (O)
Modem
CN18
Main Board
2. Turn to the card bus ejector side.
3. Remove the 2 hooks (C) from the connector (CN14).
Card Bus Ejector
Hook(C)
Main Board
CN14
33
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2.13. Removing the LCD Unit
6.2.15. Removing the LCD Unit and the
LCD Rear
Preparation : perform the section 6.2.1. , 6.2.2. and 6.2.4.
first.
Preparation : perform the section 6.2.1. , 6.2.2. , 6.2.4. and
6. 2. 13. to 6.2.14 first.
1. Remove the 2 screws (M).
Screw(M):DXQT26+D5FNL(N14)
1. Separate the LCD front and the LCD rear.
2. Remove the hinge (L).
2. Remove the LCD cable from the connector (CN11) of the
main board.
Hook Position
3. Remove the inverter cable from the connector (CN10)
4. Remove the touch panel cable from connector (CN24).
LCD Unit
Screw(M)
LCD Cable
CN10
Screw(M)
CN24
HInge(L)
LCD Front
CN11
Hinge(R)
LCD Rear
6.2.14. Removing the Hinge Cover
Preparation : perform the section 6.2.1. , 6.2.2. ,6.2.4 and
6.2.13. first.
6.2.16. Remove the Inverter
Preparation : perform the section 6.2.1. , 6.2.2. , 6.2.4. and
6.2.13 to 6. 2.15. first.
1. Remove the 2 screws (Q) and then remove the hinge cover
(L,R).
1. Remove the LCD cable from the inverter.
Screw(Q):DRHM0076ZA(N3)
2. Peel off the conductive cloth(LCD cable) from the inverter.
3. Remove the inverter with inverter box.
LCD Unit
Screw(Q)
LCD Front
LCD Hook
LCD High voltage
2pin Wire Rod
Hinge Cover(L)
Screw(Q)
Hinge Cover(R)
2. Remove the 2 screws (R).
Screw (R):DRHM0076ZA(N3)
Inverter Box
LCD Unit
Tape
Conductive Cloth
(LCD Cable)
Screw(R)
LCD Cable
Screw(R)
34
Download from Www.Somanuals.com. All Manuals Search And Download.
6.3. Reassenbly instructions
6.3.1.
Attention when CF-T4H series is repaired
· Please execute writing BIOS ID when you exchange the main board.
· Parts (sheet and rubber) etc. related various the conductive cloth and heat spreader cannot be recycled. Use new parts.
6.3.2.
Assembly knowhow of part LCD
LCD rubber, LCD side rubber and LCD backing rubber’s putting
LCD Rubber (Upper
LCD Rubber(Upper)
LCD Front Case
LCD Side Rubber
Big Small
Be parallel after putting
LCD Back Rubber(Lower)
LCD Front Case
LCD cable processing
Clamping processing of LCD cable, LCD connector connection and putting of PET tape of cable
1
2mm
The LCD insulation sheet is peeled off.
The LCD cable is processed to the LCD frame clamping.
The LCD cable is connected with the connector.
The PET tape is put.
PET Tape
1
2mm
Connector
LCD Insulation Sheet
LCD Frame Clamp
A red line of the cable is matched to the LCD frame externals.
0
1mm
Putting of the conductive cloth
The conductive cloth is put and after putting a both side tape is put.
Process the part in the Signal line of the LCD cable in the conductive cloth.
Put the conductive cloth on the connector surely.
Insulation Sheet of edge match
1mm
0
Conductive Cloth
(LCD Label)
Connector of externals match
There must not be beginning to see from externals.
Connector
Both Side Tape
LCD Cable
LCD Insulation Sheet
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting of PET Tape
The cable must not run aground on the damper.
Along the LCD module and put the LCD cable (Inverter part) with the PET tape.
Conductive Cloth (LCD Cable)
PET Tape
TS Board
LCD Cable
(Inverter part)
LCD Cable
Damper
Insulation Sheet of edge match
Putting of rear damper
Conductive Cloth (LCD Cable)
LCD Cable
Rib application putting of LCD front case
0
1mm
Extemals suiting of Frame outside
1mm
0
Rear Damper
Putting of PET Tape
LVDS Cable of edge match
LCD Cable
LVDS Cable of edge match
Processing of inverter cable
0
1mm
PET Tape
The cable must not come in succession.
Inverter Cable
The cable must not run aground on the cushion.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting of gasket (LCD)
Put on hinge (R) surely.
Gasket (LCD)
The line of the remainder
is put on hinge (R) side.
Externals suiting of reflector
Hinge (R)
0
1mm
Put the reflector part surely.
Putting of LCD damper(C)
LCD Damper(C)
Plinth externals match
1mm
0
Rib application putting of LCD front case
1mm
0
Rib application putting of LCD front case
1mm
Rib edge match of LCD front case
1mm
0
0
Putting of LCD Hook Cushion
Specificatione affixation of LCD Hook Cushion
pressure is applied to
double-sided tape portion
0
0.5mm
0
0.5mm
Hook is attached
to the left
K502
0
0.5mm
K70
0
0.5mm
Drawing out specification of LCD cable
LCD Cable (Touch Panel)
Putting of conductive cloth of LCD cable
LCD Cable (Inverter)
Conductive cloth is wrapped
(Leave the half)
70 3mm
The cable is processed under the shaft .
Note:It is confirmed that the cable does not narrow
between cabinets.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD cable processing
LCD Cable
6
8mm
Conductive Cloth
About 8mm at the edge of conductive cloth is
putting on the rib of the bottom case for conduct
The cable is processed under the convex part
The cable is processed to the ditch
6.3.3.
Installation and Line processing of Speaker
Putting of speaker fixation ring
Speaker Fixation Ring
Put according to 4 ribs.
Processing of speaker cable
Solder
Match case
2
sign to the center in the terminal of the speaker.
2.5mm From the rib to the terminal
Black line
Red line
Speaker Cable
The double coating part of
the cable according to the ditch of the case
PET Tape
0
2mm
The cable is not loosening between the rib and the pin.
Touch the boss
Putting of speaker box
Putting of speaker box
Touch the Case’s wall
38
Download from Www.Somanuals.com. All Manuals Search And Download.
6.3.4.
Assembly of Touch Pad
Putting of PAD cover tape
1mm 2mm
Insertion of PAD FFC
PAD FFC is
Installation of Pad button
Puted in the gasket
ditch
inserted in the
connector.
PAD cover
PAD FFC
PAD cover tape
Inserted in the
positioning pin
(Direction where
the reinforcement
version is seen)
Pad button
0.5mm
1mm
Touch Pad
Latch is inserted in the top case(4 places)
Putting of PAD sheet
Putting of Touch Pad
Putting of pad cover
The hooks are hooked
This line must
It is confirmed that all
LED lenses fit in the
hole of the pad cover
become vertical
Pin for positioning
PAD sheet
The touch pad
is put
After putting of the
PAD sheet, the
Flaking off paper is
peeled off
Pad Cover
Touch Pad
The hooks are inserted
Sets in the dent
6.3.5.
Processing of DC-IN Cable and Coaxial Cable
The cable is processed to
the ditch of the bottom case
Coaxial cable
The cable is processed with
the boss between ribs
Confirm the terminal is vertical
6.3.6.
Obtaining of Side Cover (L)
The upper part is shut with
lower hooks put on the
bottom case.
Side Cover(L)
DC Jack Holder
the under hooks is hooked
the bottom case
the under hooks is hooked
the bottom case
39
Download from Www.Somanuals.com. All Manuals Search And Download.
6.3.7.
Processing of MODEM Cable and LAN Cable
Insert LAN cable
previously
Standard
The cable
must enter
in the set of
3-5mm
LAN Cable
Give slack
to the drawing
out part
USB Sheet
The state that the tension hangs is NG
The cable is
processed with the
boss between ribs
The USB sheet
is put and the
cable is held
MODEM Cable
PET Tape
6.3.8.
Processing of USB Cable
USB Board
HDD Unit
PET Tape
Do not run aground in the boss
Process the line to 3 cables in parallel based on
the difference of the concave part of the bottom
case
Order is USB, modem, and LAN cable from this
side
The Cable must not enter under the
HDD unit
Do not run aground in the boss
Boss
PET Tape
0
2mm
0
2mm
6.3.9.
Screw tightening procedure of Each Unit
When serving, the screw tightening is executed according to the undermentioned procedure.
1. Screw tightening of top case
1-1. DXQT2+E6FNL(K:N12) is tightened. No.1 to No.3
1-2. DXQT26+D8FCL(L:N15) is tightened. No.4 ,No.5
1-3. DXHM0056ZA(J:N6) is tightened. No.6
Screw(L)
Screw(K)
Screw(J)
Screw(J)
Screw(K)
Screw(K)
40
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Attachment preparation of Key Board
2-1. Putting of Heat Sheet KB Large
Inclination is set
to 0.5mm or less.
Inclination is set
to 0.5mm or less.
Touch the KB hole
Touch the KB hole
2-2. Putting of tape
0
0.5mm
0.5 1.5mm
0
1mm
8
1mm
0
1mm
0.5 1.5mm
Tape(KBD)
(KBD)
KeyBoard exterior and FPC are parallel.
3. Screw tightening of bottom case (1)
The keyboard is inserted, and after the keyboard hooks are inserted in order of a and b while holding the keyboard, the screw
tightening is done in the following order.
Note:The sheet metal must not run aground on the rib (Refer to the figure below).
2-1. DXHM0039ZA(D:N5) is tightened. No.1 to No.7
2-2. DXHM0057ZA(G:N7) is tightened. No.8 to No.12
Screw(D)
Screw(G)
Keyboard Hook b
Screw(D)
Screw(D)
Screw(D)
Screw(D)
Keyboard Hook a
Screw(D)
Screw(D)
OK
NG
Keyboard
Hook
Top Case Rib
Top Case
Screw(G)
Screw(G)
Screw(G)
Assembly reference chart
Screw(G)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Screw tightening of bottom case (2)
The keyboard is inserted, and after tightening of the screw, the keyboard hooks are inserted in order of the following.
3-1. DXQT2+E12FNL(B:N11) is tightened. No.1 to No.4
3-2. DXQT2+D4FNL(F:N9) is tightened. No.5
3-3. DXQT2+E10FNL(E:N10) is tightened. No.6
3-4. DFHE5035ZA(H:N2) is tightened. No.7
3-5. DFHE5025XA(C:N501) is tightened. No.8
3-5. KIYE50000022(I:N500) is tightened. No.9
Screw(B)
Screw(B)
Screw(C)
Screw(B)
Screw(B)
Screw(H)
Screw(E)
Screw(I)
Screw(F)
6.3.10. Affixation of Win Logo Label (XP), CENTRINO Label and Energy Star Label
Win Logo Label(XP)
In the inclination at the time of putting the win logo label,
the CENTRINO label and energy star label the both ends
difference is within 0.2mm
2
5mm
CENTRINO Label
5mm
2
<Attention>
Energy Star Label
Confirm whether the paste of the label has overflowed
after the win logo label and putting of the CENTRINO label
and energy star label.
Top Case
5
7mm
2
5mm
42
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Explanation of Harddware
7 1 System Block Diagram
T4
DothanULV
CK410M
1.2GHz(/600MHz)
Core 0.940V(/0.812V)
FSB 1.05V
Block Diagram
L2 Cache=2MB
VGA Port
(for CRT)
FSB 400MHz
M-BUS
400MHz
Micro-DIMM socket
172pin (Max.1GB)
North Bridge
Alviso-GMS
1.25V
LCD
12.1”
XGA
Main Memory
(DDR2-SDRAM CSP)
512MB (32Mx16 x 8pcs)
Touch
Screen
(Config)
DMI
Touch Screen
Controller
(Config)
USB1.1
USB2.0
South Bridge
ICH6-M
1.5V
PATA
HDD
2.5”
USB2.0
x2
Port
Replicator
(Config)
USB2.0
VGA
BIOS FLASH
1MB
SST49LF008
USB2.0x4
HUB
Port Replicator
Connector (Config)
uPD720114
TPM
RJ45
(LAN)
DC-IN
Main
Battery
Li-Ion
EC, KBC
M306KA
Ethernet
Controller
RTL8101L
RJ45
(LAN)
SD Card
CB+SD
LPC-BUS
3.3V
Controller
R5C811
Touch
PAD
Internal
KB
PCMCIA
Type-II
Mini-
PCI
Type3
WLAN
Module
PCI-BUS
3.3V
AC97
Codec
STAC9751
Mic-JACK
HP-JACK
MDC
1.5
MDC
Modem
Module
RJ11
(Modem)
Speaker
(Mono)
AC-LINK
3.3V
43
Download from Www.Somanuals.com. All Manuals Search And Download.
to(*፸)
DCIN&BATT
ᯱ᯳ Aᰔᰑᰠter
(DCIN JACK)
ᰅᰃ
(2A)
᯲ᰑᰓᰛ ᯼ᰙᰗᰘᰤ
INVERTER ᰅ᯾ᰄ
᯼ᰙᰞᰕ ᰃᰇ
AC፸5
VA5
AC OVP
&UVP
᯼ᰟᰑᰔ ᰃᰇ
VC5
SLP_S3#
to(*፸)
Battery
᯼ᰙᰞᰕ ᰃᰇ
᯼ᰙᰞᰕ ᰃᰇ
ᯣᯞᯣᰆᯟᯥᯞᯠᰆ DC/DC
CONVERTER Block
ᯘᯘLTC3728LXCUHᯙ
+(፸)
VBATT(3)
ᰆᯱᯣ(4)
VSEL፸(5)
AC፸5
Battery Charger
(LTC4008EGN)
VA3
VB3
VSEL2(6)
SMBDATAE(7)
SMBCLKE(8)
BATDTCT#(9)
-(፸0)
᯼ᰟᰑᰔ ᰃᰇ
᯼ᰟᰑᰔ ᰃᰇ
CHGON
CHGPWM
SLP_S4#
SLP_S3#
VC3
from battery
VSENSE
CPU CORE DC/DC
CONVERTER Block
ᯘLTC3734EUHᯙ
EC
(M306K7)
ISENSE
BATDTCT#
ᰆ᯳PUCORE
ᰃᰑfety Block
VRON#
VRON#
VA5,VA3,VA፸5
VB፸8,VCPUCORE
VCCP,VC25
ᯘᯚᯡᯙ
Safty Circuit
(OVP Detect)
᯼ᰑᰤᰓᰘ
VCCPVC25 DC/DC
CONVERTER Block
ᯘLTC3728LXCUHᯙ
VCCP(፸.05V)
to Line SW
ᰆ᯳25
ᰃ᯼P_S3#
VA፸5 DC/DC
CONVERTER Block
ᯘLTC3728LXCUHᯙ
VA፸5
VC፸5
᯼ᰟᰑᰔ ᰃᰇ
ᰃ᯼P_S3#
VB፸8 DC/DC
CONVERTER Block
ᯘLTC3728LXCUHᯙ
VB፸8
ᰃ᯼P_S4#
VC09 DC/DC
CONVERTER Block
ᯘBD3533F-E2ᯙ
VB፸8
ᰆ᯳09
44
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Extended View
8.1.Display Section
K7
K68
N3
K60
N14
K4
K30
K501
K50
N14
K17
K61
K53
E500
N3
K5
K76
K37
E3
K30
K14
K30
E17
K50
K28
K18
K29
K29
K15
E501
K502
K70
K30
K27
K22
K25
N3
K22
K28
K25
K500
K10
Screw tightening torque
K65
N3
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Unit Ass'y / Pen Holder Section
K507
K503
K506
K505
K504
E501
E501-1
E501-1-1
E501-1-4
E501-1-1
E501-1-2
E501-1-4
E501-1-3
E501-1-2
E501-1-6
E501-1-5
E501-2
Download from Www.Somanuals.com. All Manuals Search And Download.
8.2. Cabinet Section
K73
K51
K40
E18
K8
K509
K40
K41
E2
K517
E19
K42
K39
K88
K508
K89
K81
N15
K16
N12
K1
K47
K72
N12
K41
K72
K54
K41
K31
N12
N15
K69
b
N6
K6
E12
K13
K90
K64
K48
E15
K36
K49
a
E7
Screw tightening torque
Download from Www.Somanuals.com. All Manuals Search And Download.
8.3. Bottom Section
Screw tightening torque
N8
K80
K77
E14
f
N8
E21
K71
K83
N13
K78
K511
CN12
c
CN601
K524
CN22
CN24
E9
CN13
i
K524
SW6
SW7
Tape
a
d
N15
CN14
JK1
K523
K35
JK2
K24
E22
e
g
K75
A3
h
b
N15
K84
N1
K85
N4
K55
K12
K82
K79
K59
K26
E6
E11
K515
K514
E5
K516
c
K530
K19
CN1052
h
K12
CN1053
d
N2
N500
E13
K510
K55
K52
E4
K513
K512
e
E8
K66-1
K66-1
f
K2
K3
K66
K66-1
N10
g
E1
N5
N7
N9
N5
N7
N11
i
N5
K86
E20
N5
N7
N5
N5
E10
K33
K62
N11
N5
K522
K518
K519
N7
N16
N11
N501
N501
K521
N11
K520
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Replacement Parts List
Note: Important Safety Notice
Components identified by
mark have special characteristics important for safety.
When replacing any of these components, use only manufacturer's specified parts.
CF-T4HWETZBM
REF.NO. and AREA
Main Block Unit
CN12
CN13
CN14
CN22
CN24
CN601
CN1052
CN1053
JK1
PART NO.
K1FB315BA003
DESCRIPTION
VGA CONNECTOR
Q'TY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
2
1
1
1
K1NA09E00076
K1NA68E00096
K1FY150BA007
K1KA04BA0014
K1KA10B00233
K1FB104B0055
K1FB104B0055
K2HC103B0205
K2HC103B0205
ESD165225
CONNECTOR
CONNECTOR
IO CONNECTOR
CONNECTOR
CONNECTOR
USB CONNECTOR
USB CONNECTOR
HEADPHONE JACK
MICROPHONE JACK
POWER SW
JK2
SW6
SW7
K0D112B00071
K0D113B00081
CR2032/S5Y
W-LAN SW
SW951
E1
SLIDE SW
LITHIUM BATTERY
PAD FFC
E2
DFJK12U112BB
DFJS963ZA
E3
TP CABLE
E4
DFJS958ZB
LAN CABLE
E5
DFJS980ZA
MAIN-SUB CABLE
DC-IN CABLE
E6
DFJS961ZB
E7
DFJS962ZA
SP CABLE
E8
DFJS973ZA
MODEM CABLE
PCB, MAIN
E9
DL3UP1436ABA
DL3UP1443AAA
N1ZYYY000002
N1ZYYY000003
DL3UP1477AAA
K1YYZZ000060
L0AA01A00018
N0GB1J000012
N2AZZJ000038
N2EAYYY00006
N3CAYYY00006
N5HAZ0000012
N5HZC0000014
DL3UP1498LAA
DFWV08A0083
DFWV84A0266
DFHG1824ZA
DFHG1825YA
DFHG1826ZA
DFHG1837ZA
DFHG1849ZB
DFHR9063ZA
DFHR3630ZA
RTL
RTL
E10
FPC UNIT, HDD
ANTENNA PCB-L ASS'Y
ANTENNA PCB-R ASS'Y
PCB, 2-PORT USB
CONNECTOR
E11
E12
E13
E14
E15
SPEAKER
E17
INVERTER
E18
KEY BOARD US
TOUCH PAD
E19
E20
HDD
E21
MODEM
E22
WIRELESS LAN MODULE
PCB, TS
E500
E501
E501-1
E501-1-1
E501-1-2
E501-1-3
E501-1-4
E501-1-5
E501-1-6
E501-2
Accessories
A1
RTL
LCD UNIT ASS'Y
TOUCH SCREEN PANEL KIT
FRONT TP CUSHION A
FRONT TP CUSHION B
FRONT TP CUSHION C
FRONT TP CUSHION D
FRONT TP CUSHION E
PROTECTIVE FILM
TS FPC SPACER
CF-AA1623AM6
K2CG3DR00003
CGR-B/979A
AC ADAPTOR
AC CABLE
1
1
1
1
1
1
A2
A3
LITHIUM ION BATTERY PACK
MANUAL
A4
DFQX5573ZA
DFJS954ZA
A500
A501
MODEM CABLE
PEN
DFHR9081XA
Download from Www.Somanuals.com. All Manuals Search And Download.
A502
A503
DFME0148ZA
DFHS9017ZA
TETHER T4
1
1
CLOTH ASS'Y
Packing Material
P1
DFPE0806ZB
DFPE0812ZB
DFPK1037YA
DFPK1194YA
DFPN0832ZA
DFPN0833ZA
HOLDER
1
1
1
1
2
2
P2
PAD W
P4
ACCESSORIES BOX
PACKING CASE
CUSHION T
CUSHION B
P5
P6
P7
Mechanical Parts
K1
DFBC0315ZE-0
DFBD0180ZB-0
DFBD0182ZA-0
DFBH3041ZA
DFBH3042ZA
DFBS0068ZC-0
DFGB0089VB-0
DFGE0108ZC-0
DFHG1811ZA
DFGX0428ZA-0
DFHE0215ZA
DFHE0436ZA
DFHE0843ZA
DFHE0844ZA
DFHE0943ZA
DFHE0945ZA
DFHE0953ZA
DFHG1546ZB-0
DFHG1744ZA
DFHG1766ZA-0
DFHG1767ZA-0
DFHG1771ZA
DFHG1821ZA
DFHG1773ZA
DFHG1822ZA
DFHG1778ZA
DFHG1809YA
DFHG1786ZA
DFHG1787ZA
DFHG1797ZA
DFHP7098ZA
DFHP7106YA
DFHP7140ZA
DFHP7221YA
DFHR3416ZA
DFHR3A37ZA
DFHR3A39ZA
DFHR3A78ZA
DFHR3A88ZA
DFHR3C25ZA
DFHR3A95ZA
DFHR3B19ZA
DFHR3B22ZA
DFKE0772ZA-0
DFKE0776ZA-0
DFKE0777ZA-0
DFKE0778ZA-0
DFKE0783ZA-0
PAD BUTTON
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
2
1
2
1
1
2
2
4
1
1
1
1
1
1
2
3
1
1
1
1
2
1
1
1
1
2
1
1
1
1
1
K2
POWER KNOB
K3
LAN SW KNOB
K4
HINGE-L TP
K5
HINGE-R TP
K6
LCD KNOB
K7
PANASONIC LABEL
PAD COVER
K8
K10
K12
K13
K14
K15
K16
K17
K18
K19
K22
K24
K25
K26
K27
K28
K29
K30
K31
K33
K35
K36
K37
K39
K40
K41
K42
K47
K48
K49
K50
K51
K52
K53
K54
K55
K59
K60
K61
K62
K64
LCD BATT RUBBER TP
BATT SHEET(T4)
SHEET
CLOTH LCD CABLE 1
LCD MAGNET
GASKET PAD
GASKET CLOTH (LCD CABLE)
GASKET CLOTH (LCD)
SHEET
LCD RUBBER
M-PCI CUSHION
LCD SIDE RUBBER
DC JACK HOLDER
LCD DAMPER A
LCD DAMPER B TP
LCD DAMPER C
LCD SIDE DAMPER TP
PCMCIA STOPPER CUSHION
HDD CASE ASS'Y T4 USA
CPU CUSHION
MINI-PCI CUSHION
REAR DAMPER
KB TAPE
BOTH SIDES TAPE
TAPE, CPU
PAD SHEET
SPACER CU
SPEAKER RING
SPEAKER BOX
LCD INSULATOR
KB PLATE SHEET
USB SHEET US
INVERTER TAPE
HINGE BACKUP SHEET T4
BOTTOM BACKUP SHEET
ANTENNA COVER-L
HINGE COVER-L TP
HINGE COVER-R TP
DIMM COVER (LIGHT)
SIDE COVER-R
Download from Www.Somanuals.com. All Manuals Search And Download.
K65
DFKF0257ZA-0
DFKF8166ZA-0
DFHG371ZA-1
DFKM0482ZA-0
DFKM8172XA-0
DFMD1196ZA
DFMD3121ZA
DFMD4057ZA
DFMD7A52ZA
DFMX0635ZB
DFMX1155ZA
DFMX1156ZA
DFMX1160ZA
DFMX1184ZA
DFMY0399ZA
DFMY3191YA
DFMY3192ZA
DFMY3206ZA
DFMY3207ZA
DFMY3208ZA
DFQT6299YA
DFQT9974ZA
DFQT9948ZA
DFUD0040ZA
DFHR3C02ZA
DFHR3C01ZA
DFHG1836ZA
DFHG1810ZA-0
DFHP7223ZA
DFHG1848ZA
DFHR3C48ZA
DFHR3C44ZA
DFQT9675ZA
DFHP7220ZB
DFHR3B98ZA
DFHR3C33YA
DFKE0781ZA-0
DFHP7228ZA
DFHR3C13ZA
DFHR3C34ZA
DFHG1847ZA
DFMY0421ZA
DFGT1032ZA
DFGT1075ZA
DFGX0430ZA-0
DFGX0444ZA-0
DFKE0782ZA-0
DFKH1016ZA-0
DFMD1191YA
DFHE0603ZA
DFHE5025XA
DFHE5035ZB
DRHM0076ZA
DRQT2+G6FKL
DXHM0039ZA
DXHM0056ZA
DXHM0057ZA
DXQT2+D25FNL
DXQT2+D4FNL
DXQT2+E10FNL
LCD FRONT TP
1
1
3
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
2
4
1
7
1
5
3
1
1
K66
BOTTOM CASE USA ASS'Y
FOOT RUBBER
K66-1
K68
LCD REAR (SANKI)
TOP CASE ASS'Y
LCD HOOK TP
K69
K70
K71
MDC PLATE
K72
KB HOOK F999
K73
KB PLATE
K75
TAPE
K76
INVERTER BOX
K77
MAIN PW SHEET1
PCMCIA-MAIN SHEET
SW CABLE SHEET
MCH RUBBER
K78
K79
K80
K81
HEAT SPREADER TOP
HEAT SPREADER BOTTOM
MEMORY SHEET TOP
MEMORY SHEET BOTTOM
W-LAN SHEET
K82
K83
K84
K85
K86
DIMM COVER SHEET
WINDOWS XP LABEL (FOR NOTE)
CENTRINO LABEL
LATCH SPRING
K88
K89
K90
K500
K501
K502
K503
K504
K505
K506
K507
K508
K509
K510
K511
K512
K513
K514
K515
K516
K517
K518
K519
K520
K521
K522
K523
K524
K530
N1
BATT RUBBER TAPE
TAPE TP
LCD HOOK CUSHION TP
PEN HOLDER
PEN HOLDER TAPE
PEN FIX CUSHION
PEN FIX SHEET
HOLDER BOTTOM SHEET
ENERGY STAR LABEL
PAD COVER TAPE
HDD FPC SHEET
LCD CABLE FIX SHEET
RJ DUST COVER
RJ DUST COVER FIX TAPE
RJ CABLE SHEET
TP CABLE FIX SHEET
TP CABLE FIX CUSHION
HEAT SHEET KB LARGE
BOTTOM SHEET USA
BOTTOM SHEET USA 2
BOTTOM HEAT SHEET
HDD COVER HEAT SHEET
HDD COVER
HANDY STRAP
HANDY STRAP ANGLE
LCD CONNECTOR SHEET
SCREW
N2
SCREW
N3
SCREW
N4
SCREW
N5
SCREW
N6
SCREW
N7
SCREW
N8
SCREW
N9
SCREW
N10
SCREW
Download from Www.Somanuals.com. All Manuals Search And Download.
N11
N12
N13
N14
N15
N16
N500
N501
DXQT2+E12FNL
DXQT2+E6FNL
DXQT2+E6FNL
DXQT26+D5FNL
DXQT26+D8FCL
XSB2+4FNL
SCREW
4
3
2
2
6
1
2
2
SCREW
SCREW
SCREW
SCREW
SCREW
K1YE50000022
DFHE5025XA
SCREW, I/O PIN
SCREW
Download from Www.Somanuals.com. All Manuals Search And Download.
|