| 	
		 S 
					P 
					E 
					C 
					F 
					I 
					L 
					E 
					Ceiling mount bracket   
					ET-PKF100H   
					Description   
					This ceiling mount bracket is to be used when mounting LCD projectors to the heigh ceiling.   
					Specifications   
					Vertical correction angle:   
					+20°, -5°   
					Horizontal slant correction angle:   
					Horizontal turn correction angle:   
					Dimensions (W x H x D):   
					10°   
					5°   
					435 x 424 – 507 x 254 mm   
					(17-1/8˝ x 16-11/16˝–19-31/32˝ x 10˝)   
					Note: Height (H) include holding brackets.   
					2.7 kg (6.0 lbs)   
					Weight:   
					Weights and dimensions shown are approximate. Specifications subject to change without notice.   
					Parts   
					Attachment plate . . . . . . . . . . . . . . . . . . . . . . . .1   
					Holding bracket B . . . . . . . . . . . . . . . . . . . . . . .1   
					Washer-fitted hexagonal bolts (M6 x 12) . . . . .15   
					Hexagonal screws (M6 x 8) . . . . . . . . . . . . . . . .4   
					Washer-fitted screws (M4 x 12) . . . . . . . . . . . . .8   
					Wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1   
					Flat wire clip . . . . . . . . . . . . . . . . . . . . . . . . . . .2   
					Clamp tube . . . . . . . . . . . . . . . . . . . . . . . . . . . .2   
					Projector mount bracket . . . . . . . . . . . . . . . . . .1   
					Adjuster pole A . . . . . . . . . . . . . . . . . . . . . . . . .1   
					Adjuster pole B . . . . . . . . . . . . . . . . . . . . . . . . .1   
					Angle adjuster A . . . . . . . . . . . . . . . . . . . . . . . .1   
					Angle adjuster B . . . . . . . . . . . . . . . . . . . . . . . .1   
					Holding bracket A . . . . . . . . . . . . . . . . . . . . . . .1   
					Caution:   
					• Mounting should be done by a qualified technician.   
					• Make sure that the mounting (ceiling) area has sufficient strength.   
					• Read the enclosed mounting instructions thoroughly before starting.   
					• When the product is no longer going to be used, have it disposed of quickly by a professional   
					disposal service.   
					• Do not use an electric screwdriver or impact driver to tighten screws. (Use a torque driver or simi-   
					lar tool.)   
					Dimensions   
					Illustration shows the bracket attached to the   
					Attachment plate   
					PT-F300NT/F300/FW300NT/FW300.   
					Attachement plate   
					3-Ø9.5 (3/8˝)   
					Ø49   
					(1-15/16˝)   
					Ø42   
					(1-21/32˝)   
					Ø8.5(11/32˝)   
					13 (1/2˝)   
					* 
					199   
					(7-27/32˝)   
					110 (4-11/32˝)   
					176   
					(6-15/16˝)   
					Projector   
					140 (5-1/2˝)   
					70   
					(2-3/4˝)   
					432   
					(17˝)   
					160 (6-5/16˝)   
					436 (17-5/32˝)   
					unit : mm (inch)   
					NOTE: This illustration is not drawn to scale.   
					As of June 2008   
					< 1 >   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				 |