DVD Player
DV-220KV-K
DV-120K-K
Operating Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
If the AC plug of this unit does not match the AC
outlet you want to use, the plug must be removed
and appropriate one fitted. Replacement and
mounting of an AC plug on the power supply cord of
this unit should be performed only by qualified
service personnel. If connected to an AC outlet, the
cut-off plug can cause severe electrical shock. Make
sure it is properly disposed of after removal.
This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which
requires repair will be charged for even during the
warranty period.
K041_En
POWER-CORD CAUTION
The equipment should be disconnected by removing
the mains plug from the wall socket when left
unused for a long period of time (for example, when
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
on vacation).
D3-4-2-2-1a_A_En
CAUTION
The STANDBY/ON switch on this unit will not
completely shut off all power from the AC outlet.
Since the power cord serves as the main disconnect
device for the unit, you will need to unplug it from
the AC outlet to shut down all power. Therefore,
make sure the unit has been installed so that the
power cord can be easily unplugged from the AC
outlet in case of an accident. To avoid fire hazard,
the power cord should also be unplugged from the
AC outlet when left unused for a long period of time
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement. S002*_En
(for example, when on vacation).
D3-4-2-2-2a_A_En
For Taiwan exclusively
Taiwanese two pin flat-bladed plug
K056_En
En
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
What’s in the box .............................................................5
Loading the batteries in the remote control ................5
Connections
Connecting using an audio/video cable.......................6
Connecting using an HDMI cable (DV-220KV-K
only) ...................................................................................6
Part Names and Functions
Remote control.................................................................8
Playback
Playing discs or files......................................................10
Example of display on main unit display window...........11
Playing files stored on USB devices...........................12
Recording audio CD tracks on USB devices.............12
Playing in the desired order (Programmed Play) ..........13
Karaoke ...........................................................................13
Changing the settings
Audio Settings parameters ..........................................14
Video Adjust parameters..............................................14
Initial Settings parameters...........................................14
Playable discs and files
Playable discs.................................................................16
Playable files ..................................................................17
Additional information
Troubleshooting.............................................................18
Language Code Table and Country/Area Code
Table ................................................................................22
Setting the TV system...................................................23
Cautions on use .............................................................23
Handling discs ...............................................................25
Specifications.................................................................26
4
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
What’s in the box
When disposing of used batteries, please comply with
governmental regulations or environmental public
institution’s rules that apply in your country/area.
WARNING
Do not use or store batteries in direct sunlight or other
excessively hot place, such as inside a car or near
a heater. This can cause batteries to leak, overheat,
explode or catch fire. It can also reduce the life or
performance of batteries.
Remote Control
Audio/video cable
Power cable
AA batteries (R6) x 2
Operating instructions (this document)
Front panel button names sticker (Taiwanese model
only) – Chinese language button names for the front
panel controls.
Remote control overlay (Taiwanese model only) –
Place the overlay on the remote control to be able to
read the buttons in Chinese
Loading the batteries in the
remote control
Open the rear lid and insert the batteries
as shown on the diagram below.
To close the rear lid, line up the catch with the groove and slide
in the direction of the arrow ().
Notes
Do not use any batteries other than the ones
specified. Also, do not use a new battery together with
an old one.
When loading the batteries into the remote control,
set them in the proper direction, as indicated by the
polarity marks ( and ).
Do not heat batteries, disassemble them, or throw
them into flames or water.
Batteries may have different voltages, even if they are
the same size and shape. Do not use different types of
batteries together.
To prevent leakage of battery fluid, remove the
batteries if you do not plan to use the remote control
for a long period of time (1 month or more). If the fluid
should leak, wipe it carefully off the inside of the case,
then insert new batteries. If a battery should leak and
the fluid should get on your skin, flush it off with large
quantities of water.
En
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Be sure to turn off the power and unplug the power
cord from the power outlet whenever making or
changing connections.
When an HDMI-compatible device is connected, the
resolution is displayed on the front panel display.
The resolution of the video signals output from the
player’s HDMI OUT terminal is changed manually.
Change the HDMI Resolution setting (page 15).
Settings for two units can be stored in the memory.
This player is designed for connection to HDMI-
compatible devices. It may not operate properly if
connected to DVI devices.
Connect the power cord after all the connections
between devices have been completed.
Connecting using an audio/
video cable
Connecting to a TV
Player's rear panel (DV-220KV-K)
Yellow
Player's rear panel (DV-220KV-K)
White
Red
Audio/video
cable (included)
HDMI cable
(commercially
available)
To audio/video
input terminals
Match the direction of the plug to
the terminal and insert straight.
To HDMI input
terminal
TV
TV
Connecting using an HDMI
cable (DV-220KV-K only)
By using an HDMI cable, digital signals can be trans-
ferred to an HDMI-compatible TV on a single cable with
no loss of picture or sound quality. After connecting,
make the player’s resolution and HDMI color settings
according to the HDMI-compatible TV. Also refer to the
HDMI-compatible TV’s operating instructions.
HDMI, the HDMI Logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing, LLC.
Notes
This player’s interface is designed based on the High-
Definition Multimedia Interface specification.
6
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting using commercially available
cables
Connecting to an AV receiver or
amplifier
The player can be connected to a TV, etc., using
commercially available component video cables.
The player can be connected to an AV amplifier, etc.,
using commercially available digital audio cables.
Player's rear panel (DV-220KV-K)
HDMI cable
(commercially
available)
Match the direction of the plug to
the terminal and insert straight.
To HDMI input
terminal
From HDMI
output
terminal
AV receiver
or amplifier
HDMI cable
(commercially
available)
To HDMI input
terminal
TV
Audio signals that can be output
from the player’s HDMI OUT
terminal
44.1 kHz to 96 kHz, 16-bit/20-bit/24-bit 2-channel
linear PCM audio (including 2-channel downmixing)
Dolby Digital 5.1-channel audio
DTS 5.1-channel audio
MPEG audio
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #:
5,451,942 & other U.S. and worldwide patents issued
& pending. DTS and DTS Digital Out are registered
trademarks and the DTS logos and Symbol are
trademarks of DTS, Inc. © 1996-2008 DTS, Inc. All
Rights Reserved.
En
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
KEY /KEY (page 13)
ECHO +/ECHO - (page 13)
ENTER
Remote control
STANDBY/ON
OPEN/CLOSE
Use this to implement the selected item or enter a
setting that you have changed.
1
14
ANGLE
AUDIO
SUBTITLE
7 HOME MENU
2
4
15
16
3
Press to display/hide the Home Menu.
DVD/
USB
1
4
2
3
6
9
HOME MENU
DVD
CLEAR
5
8
17
Audio Settings
Play Mode
Video Adjust
Disc Navigator
CD –> USB Rec
0
7
MENU
TOP MENU
KEY
5
6
18
Initial Settings
ECHO
ECHO
+
ENTER
-
HOME
MENU
Audio Settings (page 14)
Video Adjust (page 14)
Play Mode (PLAY MODE on page 8)
Disc Navigator (MENU on page 9)
Initial Settings (page 14)
RETURN
19
7
KEY
8
PLAY
9
20
21
PAUSE
STOP
NEXT
PREV
CD -> USB Rec (page 12)
10
11
22
PLAY MODE
ZOOM
DISPLAY
KARAOKE
8 PLAY
23
24
12
13
Press to start playback.
9 //
Press during playback to fast-reverse.
Press in the pause mode to move backward
frame-by-frame.
DVD
Press and hold in while in the pause mode for
slow play in the reverse direction.
1 STANDBY/ON
a PREV
Press to turn the power on and off.
Press to return to the beginning of the currently
playing title, chapter, track or file. Press twice to
move back to the beginning of the previous title,
chapter, track or file.
2 AUDIO
For discs or files including multiple audio streams/
channels, the audio stream/channel can be switched
during playback.
b PAUSE
Press to stop playback temporarily. Press again to
resume.
3 SUBTITLE
On DVD-Video or DivX discs containing subtitles
in multiple languages, the subtitle can be switched
during playback.
c KARAOKE (page 13)
d PLAY MODE
4 Number buttons (0 to 9)
Press to display/hide the Play Mode screen.
Use these to specify and play the title, chapter, track
or file you want to view/listen to. Also use them to
select items on menu screens, etc.
Play Mode
A-B Repeat
Repeat
A(Start Point)
B(End Point)
Off
5 TOP MENU
Random
Program
Press to display the top menu of the DVD-Video.
Search Mode
6 ///
Use these to select items, change settings and move
the cursor.
8
En
Download from Www.Somanuals.com. All Manuals Search And Download.
A-B Repeat
l NEXT
The specified section within a single title or
track is played repeatedly.
Repeat
Plays titles, chapters, tracks or files repeatedly.
Random
Playes titles, chapters or tracks in random
order.
Program (page 13)
Plays titles, chapters, tracks or files in the order
in which you program them.
Search Mode
Plays the specified number or time within the
title, chapter, track or file.
Press during playback to skips ahead to the begin-
ning of the next title, chapter, track or file.
m STOP
When STOP is pressed during playback, the
point at which playback was stopped is stored in
the memory. When PLAY is pressed, playback
resumes from the point at which it was stopped.
n DISPLAY
The elapsed time, amount remaining, etc., is
displayed.
o ZOOM
The Play Mode function may not work for some
discs or files.
Zooming on the image
e OPEN/CLOSE
Open the disc tray and load the disc.
f ANGLE
On DVD-Video discs containing multiple angles, the
angle can be switched during playback.
g DVD/USB (page 12)
Press to switch between the DVD and USB modes.
h CLEAR
Press to clear the selected item. Use this for exam-
ple if you input the wrong number.
i MENU
Press to display the menu screen or Disc
Navigator.
Select and play the title, chapter, track or file
from the Disc Navigator.
Ex.: DVD video Disc Navigator
01
02
03
04
05
06
Disc Navigator:Title
01- 49: ––
j RETURN
Press to return to the previous screen.
k / /
Press during playback to fast-forward.
Press in the pause mode to move forward
frame-by-frame.
Press and hold in while in the pause mode for
slow play in the forward direction.
En
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Playing discs or files
Turn the power on.
Open the disc tray.
1
2
DV-220KV-K
Load the disc.
Starts playback.
3
4
To stop.
Before starting, turn the TV’s power on and switch the TV’s input.
The player’s screen display language can be changed (OSD Language on page 15).
10
En
Download from Www.Somanuals.com. All Manuals Search And Download.
When no disc is loaded
Example of display on main
unit display window
When the power is turned on (ON)
When the power is turned off (OFF)
When the disc tray is opened
(OPEN)
When the disc tray is closed
(CLOSE)
When the disc is being
loaded (LOAD)
When the title menu or menu is
displayed (TITLE)
When the GUI is displayed or
operated (GUI)
When in the USB mode (USB)
When the disc is stopped
(STOP)
En
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing files stored on USB
devices
Recording audio CD tracks
on USB devices
The player may not recognize the USB device, may
not play files or may not supply power to the USB
device. For details, see When a USB device is con-
nected on page 19.
The tracks of audio CDs loaded in the player can be
recorded on a USB device connected to the USB
port.
It may not be possible to record tracks of audio CDs
on a USB device. For details, see When a USB device
is connected on page 19.
Pioneer does not support that all files recorded on
all USB devices will play or that power will be sup-
plied to the USB device. Also note that Pioneer will
accept no responsibility whatsoever for loss of files
on USB devices caused by connection to this player.
Selecting the track(s) to be
recorded
1
Turn the power on.
1
Load the audio CD.
Press STANDBY/ON.
If playback starts automatically, press STOP
to stop playback.
2
Switching the input to the USB mode.
Press DVD/USB.
2
Display the Home Menu.
Press HOME MENU.
USb is displayed on the front panel display.
3
Connecting USB devices.
3
Select CD -> USB Rec.
The Disc Navigator appears automatically.
Use /// to select, then press ENTER.
Player’s front panel (DV-220KV-K)
CD –> USB Rec
Track 1–13
Individual
Select All
All Clear
Select Track
Bitrate
Track01
Track02
Track03
Track04
Track05
Track06
Track07
Track08
01:43
03:17
04:18
04:59
04:20
04:38
04:40
04:11
To USB port
Start
Selected Track
Total Time
00
000:00
USB device
4
Select Select Track Individual the
4
Starts playback.
track(s) you want to record.
Use /// to select.
Use /// to select the file, then press ENTER.
Turn the power off before removing the USB device.
The input will remain in the USB mode the next time
the power is turned on. To return to the DVD mode,
press DVD/USB (or press OPEN/CLOSE to open
the disc tray).
Individual: Select 1 track at a time.
Select All: Select all the tracks.
All Clear: Deselect all the tracks.
5
Select Bitrate (transfer rate).
Use /// to select, then press ENTER.
Select 128kbps, 192kbps or 320kbps.
6
Start recording.
Use /// to select Start, then press ENTER.
Notes
The audio signals are converted into MP3 format for
output.
CD -> USB Rec can only be selected when the audio
CD is stopped.
When recording is completed, a folder named
“PIONEER” is automatically created on the USB
device. The recorded tracks are stored in this folder.
12
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing in the desired order
(Programmed Play)
Karaoke
To use the karaoke function, connect the player and TV
or AV amplifier, etc., using analog cables.
Be sure to adjust the volume and echo to the minimum
before connecting the microphone. Failure to do so may
result in damage to the speakers.
1
Display the Play Mode screen.
Press PLAY MODE.
1
Adjusting the microphone volume to the
minimum
2
Select Program.
Turn the VOLUME control on the player’s front panel
counterclockwise (to MIN).
Use / to select, then press ENTER or .
3
Select Create/Edit.
2
Adjusting the echo to the minimum
Use / to select, then press ENTER.
Press the KARAOKE button on the remote control, then
The Create/Edit screen differs according to the disc
or file.
within 5 seconds press (ECHO -).
The echo decreases each time this is pressed.
4
Select the title, chapter, track or file to be
3
Connecting the microphone
played.
Connect the microphone to the MIC terminal on the
Use /// to select, then press ENTER.
player’s front panel.
Program
Player’s front panel (DV-220KV-K)
Program Step
Title 1-01
Title 01
Chapter 1-15
Chapter 001
Chapter 002
Chapter 003
Chapter 004
Chapter 005
Chapter 006
Chapter 007
Chapter 008
01.
02.
03.
04.
05.
06.
07.
08.
To add to a program, first select the place in the
program (the program step), next select the title,
chapter or track, then press ENTER (files are added
at the end of program).
Press RETURN to return to the previous screen. If
you return to the previous screen when inputting it,
the settings you have programmed are cleared.
To delete a step, highlight it and press CLEAR.
4
Loading and playing the disc
Adjust the volume of the connected TV, etc. The
VOLUME control on the player’s front panel only
adjusts the volume of the microphone.
5
Adjusting the microphone volume
Turn the VOLUME control on the player’s front panel
5
Starts playback.
clockwise (towards MAX).
Press PLAY.
To adjust the echo, press the KARAOKE button,
then within 5 seconds press the or (ECHO - or
ECHO +) button.
To adjust the key, press the KARAOKE button, then
within 5 seconds press the or (KEY (high)/
KEY (low) button. The key can be adjusted up or
down by five steps each.
To play a program that has already been set, select
Playback Start from the program screen, then press
ENTER.
To resume normal playback, select Playback Stop
from the program screen, then press ENTER. The
program remains in the memory.
To cancel the entire program, select Program Delete
from the program screen, then press ENTER.
Notes
The sound may be distorted if the microphone’s
volume is too high. If so, lower the microphone’s
volume.
If there is howling, move the microphone away from
the speakers. Also try lowering the volume and echo.
Notes
Programs can be played repeatedly. Select
Program Repeat from Repeat on the play mode
screen during programmed playback.
Programs cannot be played in random order (random
play is not possible during programmed play).
En
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the settings
The factory default settings are indicated in italic.
Parameters (settings)
Hue
Adjusts the balance between green and
(green 9 to red 9) red.
Audio Settings parameters
Adjusts the density of the colors. This
setting is effective for sources with many
colors, such as cartoons.
Chroma Level
(-9 to +9)
Parameters (settings)
The sound of a WMA or MP3 file is
played with high sound quality. This is
only valid for files with the extension
“.wma” or “.mp3”.
Brightness, Contrast, Gamma, Hue and Chroma Level are set
to 0 upon purchase.
Sound Retriever
(High/Low/Off)
The effect depends on the file. Try
different settings, and choose the one
providing the good effect.
Initial Settings parameters
The player’s detailed settings can be changed here.
Initial Settings cannot be selected during playback.
Stop the disc first.
Equalizer
(Off/Rock/Pop/
Live/Dance/
Techno/Classic/
Soft)
Select according to the genre of music to
be listened to.
DV-220KV-K
Initial Settings
A surround sound field with a sense
of presence can be created with two
speakers.
When set to On, linear PCM audio sig-
nals of 96 kHz or greater are converted
to 48 kHz.
Digital Audio Out
Video Output
Language
HDMI Out
Auto
Digital Out
On
Virtual Surround
(On/Off)
Dolby Digital Out
DTS Out
Dolby Digital
DTS
Display
Options
96kHz PCM Out
MPEG Out
96kHz > 48kHz
MPEG > PCM
This makes loud sounds weaker and
weak sounds louder. Change the
setting for example when watching
movies late at night.
Digital Audio Out settings
Audio DRC
(High/Medium/
Low/Off)
This setting only affects Dolby Digital
sound.
Options
Settings
settings
The effect depends on the volume
of the connected TV, AV receiver or
amplifier, speakers, etc. Try different
settings, and choose the one provid-
ing the strongest effect.
Select the audio signals to be output from
the HDMI OUT terminal (LPCM (2CH)/
HDMI Out
(DV-220KV-K only) Auto/Off) according to the connected
HDMI-compatible device.
Dialog
(High/Medium/
Low/Off)
Change this setting if the sound of dialogs
is low and the dialogs are hard to hear.
Select whether to output digital audio
Digital Out
signals (On) from the COAXIAL DIGITAL
AUDIO OUT terminals or not (Off).
Select whether to output Dolby Digital
audio signals (Dolby Digital) or to convert
Dolby Digital audio signals into linear
PCM signals (Dolby Digital > PCM) for
output, according to the connected AV
amplifier, etc.
About Sound Retriever function
When audio data is removed during the compres-
sion process, sound quality often degrades. The
Sound Retriever function automatically enhances
compressed audio and restores CD quality sound.
Dolby Digital Out
Select whether to output DTS audio
signals (DTS) or not (Off), according to the
connected AV amplifier, etc.
DTS Out
Video Adjust parameters
Select whether to output 96 kHz audio
signals (96kHz) or to convert 96 kHz audio
signals into linear PCM signals (96kHz >
48kHz) for output, according to the con-
nected AV amplifier, etc.
Parameters (settings)
96 kHz PCM Out
Sharpness
(Fine/Standard/
Adjusts the picture’s sharpness.
Soft)
Select whether to output MPEG audio
signals (MPEG) or to convert MPEG audio
signals into linear PCM signals (MPEG
> PCM) for output, according to the con-
nected AV amplifier, etc.
Brightness
(-20 to +20)
Adjusts the picture’s brightness.
MPEG Out
Adjusts the ratio of the brightness of
the brightest and darkest portions of the
picture.
Contrast
(-16 to +16)
Gamma
(-3 to +3)
Adjusts the look of the dark portions of
the picture.
14
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Output settings
Options settings
Options
Settings
settings
Options
Settings
settings
Change the picture’s display format
Select whether to operate the player using
the remote control of the AV component
(DV-220KV-K only) connected using an HDMI cable (On) or
(4:3 (Letter Box)/4:3 (Pan & Scan)/
16:9 (Wide)/16:9 (Compressed)),
according to the connected TV.
16:9 (Compressed) can only be set on
the DV-220KV-K.
KURO LINK
TV Screen
not (Off).
Restrict DVD-Video viewing (Password/
Parental Lock
Level Change/Country Code).
Change the output format of the video sig-
nals output from the COMPONENT VIDEO
OUT terminals (Progressive/Interlace).
Display the registration code required
for playing DivX VOD files (Activate/
Deactivate).
Component Out
DivX VOD
Change the resolution of the video signals
Select whether to turn the power off
automatically (On) or not (Off). When set
to On, the power automatically turns off if
no operation is performed for 30 minutes
or more while in the stop mode.
HDMI Resolution output from the HDMI OUT terminals
(DV-220KV-K only) (720x480i/720x576i/720x480p/720x576p/
1280x720p/1920x1080i/1920x1080p).
Auto Power Off
Change the video signals output from the
HDMI Color
HDMI OUT terminal (Full range RGB/RGB/
(DV-220KV-K only)
Component).
Setting the Component Out and
HDMI Resolution settings back to
their defaults
Language settings
Options
Settings
settings
1
Turn the player’s power off.
Press STANDBY/ON.
Change the language when listening to
Audio Language
the sound of DVD-Video discs (English/
available languages/Other Language).
2
Press STANDBY/ON while pressing .
Use the buttons on the player’s front panel. The power
turns on.
Change the language of the subtitles
displayed for DVD-Video discs (English/
available languages/Other Language).
Subtitle Lan-
guage
Restoring all the settings to the
defaults
Change the language used for the menu
displays of DVD-Video discs (w/Subtitle
Lang./available languages/Other Lan-
guage).
DVD Menu Lang.
Subtitle Display
1
Turn the player’s power off.
Select whether to display subtitles (On)
or not (Off).
Press STANDBY/ON.
2
Press STANDBY/ON while pressing .
Use the buttons on the player’s front panel.
Display settings
Options
Settings
settings
Change the language of the operation
messages (Play, Stop, etc.) displayed
on the TV screen (English/available lan-
guages).
OSD Language
Angle Indicator
Select whether to display the angle mark
on the TV screen (On) or not (Off).
Select whether to display operation mes-
sages (Play, Stop, etc.) on the TV screen
(On) or not (Off).
On Screen Dis-
play
En
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable discs and files
About region numbers
Playable discs
All DVD-Video discs carry a region mark on the case
somewhere that indicates which region(s) of the
world the disc is compatible with. Your DVD player
also has a region mark, which you can find on the
rear panel. Discs from incompatible regions will not
play in this player. In this case the attention sentence
Incompatible disc region number Can’t play disc is
displayed on screen. Discs marked ALL will play in
any player. The diagram below shows the various DVD
regions of the world.
Commercially available DVD-Video discs
DVD-R/-RW/-R DL and DVD+R/+RW/+R
DL discs recorded in the Video mode and
finalized
DVD-R/-RW/-R DL discs recorded in the VR
mode
Video CDs (including Super VCDs)
Commercially available audio CDs
CD-R/-RW/-ROM discs containing music
recorded in the CD-DA format
1
JPEG files recorded on DVD-R/-RW/-R DL
discs, CD-R/-RW/-ROM discs or USB devices
5
2
DivX video files recorded on DVD-R/-RW/
-R DL discs, CD-R/-RW/-ROM discs or USB
devices
1
6
2
3
4
5
WMA files recorded on DVD-R/-RW/-R DL
discs, CD-R/-RW/-ROM discs or USB devices
2
4
MP3 files recorded on DVD-R/-RW/-R DL
discs, CD-R/-RW/-ROM discs or USB devices
Regarding copy protected CDs
Fujicolor CD
KODAK Picture CD
This player is designed to conform to the specifications
of the audio CD format. This player does not support
the playback or function of discs that do not conform to
these specifications.
is a trademark of DVD Format/Logo Licensing
Corporation.
is a trademark of FUJIFILM Corporation.
About playing DualDiscs
A DualDisc is a new two-sided disc, one side of
which contains DVD content — video, audio, etc. —
while the other side contains non-DVD content such
as digital audio material.
This label indicates playback compatibility with
DVD-RW discs recorded in VR format (Video
Recording format). However, for discs recorded with
a record-only-once encrypted program, playback can
only be achieved using a CPRM compatible device.
The DVD side of a DualDisc can be played on this
player (excluding any DVD-Audio content).
The non-DVD, audio side of the disc is not compat-
ible with this player.
It is possible that when loading or ejecting a
DualDisc, the opposite side to that being played will
be scratched. Scratched discs may not be playable.
For more detailed information on the DualDisc
specification, please refer to the disc manufacturer
or disc retailer.
Notes
This player does not support multisession discs or
multiborder recording.
Multisession/multiborder recording is a method in
which data is recorded on a single disc in two or more
sessions/borders. A “session” or “border” is one
recording unit, consisting of a complete set of data
from lead-in to lead-out.
Playing discs created on
computers or BD/DVD recorders
It may not be possible to play discs recorded using
a computer due to the application settings or com-
puter’s environment settings. Record discs in a
format playable on this player. For details, contact
the dealer.
Discs that cannot be played
DVD-Audio discs
DVD-RAM discs
SACDs
CD-G
Blu-ray discs
HD DVDs
Discs that have not been finalized
Discs recorded with packet writing
It may not be possible to play discs recorded using
a computer or a BD/DVD recorder, if burn qual-
ity is not good due to characteristics of the disc,
scratches, dirt on the disc, dirt on the recorder’s
lens, etc.
16
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported image file formats
Playable files
Only discs recorded in ISO9660 Level 1, Level 2 and
Joliet can be played.
JPEG
Resolution: Up to 3 072 x 2 048 pixels
This player supports baseline JPEG.
This player supports Exif Ver.2.2.
Files protected by DRM (Digital Rights
Management) cannot be played.
Files other than the ones below (WMV, MPEG4-AAC,
etc.) are not guaranteed to play.
This player does not support progressive JPEG.
Supported audio file formats
Supported video file formats
This player does not support VBR (Variable Bit
Rate).
DivX
This player does not support lossless encoding.
DivX is a media technology created by DivX, Inc.
DivX media files contain image data.
DivX files may also include such advanced playback
functions as menu screens and selection of multiple
subtitle languages/audio tracks.
Windows Media™ Audio (WMA)
Sampling frequencies: 32 kHz, 44.1 kHz and 48 kHz
Bit rate: Up to 192 kbps
This player supports files encoded using Windows
Media Player Ver. 7/7.1, Windows Media Player for
Windows XP and Windows Media Player 9 Series.
Windows Media is either a registered trademark or
trademark of Microsoft Corporation in the United
States and/or other countries.
This product includes technology owned by
Microsoft Corporation and cannot be used or distrib-
uted without a license from Microsoft Licensing, Inc.
Plays DivX® video, including premium content
DivX® is a registered trademark of DivX, Inc., and is
used under license.
Displaying external subtitle files
MPEG-1 Audio Layer 3 (MP3)
The font sets listed below are available for external
subtitle files. You can see the proper font set on-
screen by setting the Subtitle Language on page 15
to match the subtitle file.
Sampling frequencies: 32 kHz, 44.1 kHz and 48 kHz
Playable file extensions
This player supports the following language groups:
Video files
Afrikaans (af), Basque (eu), Catalan (ca), Dan-
ish (da), Dutch (nl), English (en), Faroese (fo),
Finnish (fi), French (fr), German (de), Icelandic
(is), Irish (ga), Italian (it), Norwegian (no), Por-
tuguese (pt), Rhaeto-Romanic (rm), Scottish
(gd), Spanish (es), Swedish (sv)
.divx .avi
Files not containing DivX video signals cannot be
played, even if they have the extension “.avi”.
Group 1
Image files
.jpg .jpeg
Albanian (sq), Croatian (hr), Czech (cs), Hun-
garian (hu), Polish (pl), Romanian (ro), Slovak
(sk), Slovenian (sl)
Group 2
Audio files
.wma .mp3
Bulgarian (bg), Byelorussian (be), Macedonian
(mk), Russian (ru), Serbian (sr), Ukrainian (uk)
Group 3
Group 4
Group 5
Hebrew (iw), Yiddish (ji)
Turkish (tr)
Some external subtitle files may be displayed incor-
rectly or not at all.
For external subtitle files the following subtitle for-
mat filename extensions are supported (please note
that these files are not shown within the disc naviga-
tion menu): .srt, .sub, .ssa, .smi
The filename of the movie file has to be repeated at
the beginning of the filename for the external sub-
title file.
The number of external subtitle files which can be
switched for the same movie file is limited to a maxi-
mum of 10.
En
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Troubleshooting
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with
this component, check the points below. Sometimes the trouble may lie in another component. Inspect the other
components and electrical appliances being used. If the trouble cannot be rectified after checking the items
below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.
The player may not operate properly due to static electricity or other external influences. In such cases, normal
operation may be restored by unplugging the power cord then plugging it back in.
General problems
Problem
Check
Remedy
Settings you have made have been
cleared.
Was the power cord unplugged forcibly Be sure to press STANDBY/ON on the player’s
while the player’s power was on?
front panel or press STANDBY/ON on the remote
control and wait for the OFF indicator on the front
panel display to turn off before unplugging the
power cord.
Difference in volume between DVDs This is not a problem with the player.
and CDs.
The volume may sound different due to differences
in how the signals are recorded on the disc.
Player cannot be operated with the
remote control.
Are you operating from far away?
Operate from within a distance of 7 meters from the
remote control sensor.
Is the remote control sensor exposed to The remote control signals may not be received
direct sunlight or strong artificial light
from a fluorescent bulb, etc.?
properly if the remote control sensor is exposed
to direct sunlight or strong artificial light from a
fluorescent bulb, etc.
Are the batteries dead?
Is the disc scratched?
Is the disc dirty?
Replace the batteries (page 5).
Scratched discs may not play.
Wipe the dirt off the disc (page 25).
Disc cannot be played or disc tray
opens automatically.
Is the disc properly set in the disc tray? Set the disc with the printed side facing up.
Set the disc within the groove in the disc tray.
Does the disc have the right region
number?
See About region numbers on page 16.
Is the player placed in a humid loca-
tion?
There could be condensation inside. Wait a while
for the condensation to evaporate. Do not place the
player near an air-conditioner, etc. (page 24).
The player’s power turns off auto-
matically.
Is Auto Power Off set to On?
If Auto Power Off is set to On, the player’s power
turns off automatically if no operation is performed
for over 30 minutes (page 15).
Power turns on or off automatically.
Is KURO LINK set to On?
The player’s power may turn on together with the
power of the TV connected to the HDMI OUT termi-
nal. If you do not want the player’s power to turn on
when the TV’s power is turned on, set KURO LINK
to Off (page 15).
Input of connected TV and AV sys-
tem switches automatically.
Is KURO LINK set to On?
The input of the TV and AV system (AV receiver or
amplifier, etc.) connected to the HDMI OUT termi-
nal may automatically switch to the player when
playback starts on the player or the menu screen
(Home Menu, etc.) is displayed. If you do not want
the inputs of the connected TV and AV system (AV
receiver or amplifier, etc.) to switch automatically,
set KURO LINK to Off (page 15).
Picture is stretched, or aspect ratio
cannot be switched.
Is the aspect ratio properly set on the
connected TV?
Refer to the TV’s operating instructions and set the
TV’s aspect ratio properly.
Is TV Screen properly set?
Set TV Screen properly (page 15).
18
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Check
Remedy
During playback, picture is disturbed This is not a problem with the player.
or dark.
This player supports Macrovision copy protection.
With some TVs, the picture may not display prop-
erly when playing discs including copy prevention
signals. This is not a malfunction.
Are the player and TV connected via a
video deck?
When the player and TV are connected via a video
deck, the player’s analog copy protect function may
cause the picture being played on the video deck
not to display properly. Connect the player and TV
directly.
Is the TV system properly set?
The factory default setting is AUTO. If the picture is
distorted, switch the TV system to the one used in
your country or region (NTSC or PAL) (page 23).
Digital audio signals are not output
from the COAXIAL DIGITAL AUDIO
OUT terminals.
Is Digital Out set to On?
When connected to the COAXIAL DIGITAL AUDIO
OUT terminals, set Digital Out to On (page 14).
96 kHz/88.2 kHz digital audio signals Is 96 kHz PCM Out set to 96kHz?
Set 96 kHz PCM Out to 96kHz > 48kHz.
are not output from the COAXIAL
DIGITAL AUDIO OUT terminals.
Are you playing a copyright-protected
disc?
The 96 kHz/88.2 kHz digital audio signals of copy-
right-protected discs cannot be output.
Folder or file names are not recog-
nized.
Have you exceeded the maximum num- Up to 299 folders can be recognized on one disc.
ber of folder or file names the player
can recognize?
Up to 648 files can be recognized within one folder.
Depending on the folder structure, however, the
player may not be able to recognized certain folders
or files.
Folder or file names are not dis-
Do the folder or file names contain any- Folder and file names can be displayed. Note,
played or are not properly displayed. thing other than 1-byte alphanumeric
characters?
however, that only 1-byte alphanumeric characters
can be displayed. Folder and file names including
characters other than 1-byte alphanumeric char-
acters may be displayed for example as F_001 or
FL_001, and the characters may be garbled.
Time is required to play JPEG files.
Are you playing large files?
Some time may be required to display large files.
Black bars are displayed when play-
ing JPEG files.
Are you playing files with different
aspect ratios?
Black bars may be displayed along the top and bot-
tom or sides when JPEG files with different aspect
ratios are played.
When a USB device is connected
Problem
Check
Remedy
USB device is not recognized.
Is the USB device properly connected?
Connect the device securely (all the way in).
Is the USB device connected via a
USB hub?
This player does not support USB hubs. Connect
the USB device directly.
This player only supports USB mass storage class
devices.
This player supports portable flash memory and
digital audio playback devices.
Only the FAT16 and FAT32 file systems are sup-
ported. Other file systems (exFAT, NTFS, etc.) are
not supported.
This is not a problem with the player.
This is not a problem with the player.
Turn the power off then back on.
Some USB devices may not be recognized properly.
Copyright-protected files cannot be played.
File cannot be played.
Is the file copyright-protected (by
DRM)?
This is not a problem with the player.
This is not a problem with the player.
Do the folder of file names contain
Files stored on a computer cannot be played.
It may not be possible to play some files.
Folder or file names are not dis-
The maximum number of characters displayable
for the folder and file names on the Disc Navigator
is 14.
played or are not properly displayed. more than 14 characters?
En
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Check
Remedy
Folder or file names are not dis-
played in alphabetical order.
This is not a problem with the player.
The order of the folder and file names displayed
on the Disc Navigator depends on the order in
which the folders or files were recorded on the USB
device.
Much time is required to recognized What is the USB device’s capacity?
the USB device.
Some time may be required to load the data when
large capacity USB devices are connected (this
could take several minutes).
Power is not supplied to the USB
device.
Is Err displayed on the front panel dis-
play? No power is supplied if the power
consumption is too high.
Turn the power off then back on.
Turn the power off, then disconnect and reconnect
the USB device.
Press DVD/USB to switch back to the DVD mode,
then switch again to the USB mode. (When the
input is switched back to the DVD mode, LOAd is
displayed on the front panel display and the disc
is recognized. When the input is switched back
to USB, USb is displayed on the front panel display.)
If the USB device is equipped with an AC adapter,
use the USB device with the AC adapter connected.
Audio CD tracks cannot be recorded Is there enough free space on the USB
Recording is not possible if there is not enough free
space left on the USB device. In this case, Available
USB space is low is displayed.
on a USB device.
device?
Are there 300 or more folders on the
USB device?
Recording is not possible if the USB device con-
tains 300 or more folders.
Are there already 99 PIONEER folders
on the USB device?
Recording is not possible if there are already 99
PIONEER folders on the USB device.
When connected to an HDMI-compatible device
(DV-220KV-K only)
Problem
Check
Remedy
Picture is not displayed.
Is the resolution properly set?
Set HDMI Resolution properly for the connected
device (page 15).
Restore HDMI Resolution to the default setting
(720x480p/720x576p) (page 15).
Is the HDMI cable properly connected? Connect the cable securely (all the way in).
With some cables, 1 080p video signals will not be
output.
Sound is not produced or is dis-
torted.
Is HDMI Out properly set?
Set HDMI Out to LPCM (2CH) or Auto (page 14).
Multichannel audio signals are not
output.
Is HDMI Out properly set?
Set HDMI Out to Auto (page 14).
Colors are not properly displayed on Is HDMI Color properly set?
Change the HDMI Color setting (page 15).
TV screen.
20
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Check
Remedy
KURO LINK function does not work. Is the HDMI cable you are using a High Use a High Speed HDMI™ cable.
Speed HDMI™ cable?
Is KURO LINK set to On on the player?
Set KURO LINK to On on the player (page 15).
Does the connected device support the The KURO LINK function does not work with
KURO LINK function?
devices of other brands, even if connected using an
HDMI cable.
The KURO LINK function will not work if devices
that do not support the KURO LINK function or
devices of other brands are connected between the
KURO LINK-compatible device and the player.
Even when connected to a Pioneer product com-
patible with the KURO LINK function, some of the
functions may not work.
Is KURO LINK set to On on the con-
nected device?
Set “KURO LINK” on the connected component to
“ON”. The KURO LINK function works when “KURO
LINK” is set to “ON” for all the components con-
nected to the HDMI OUT terminals.
Are multiple players connected?
Is the player’s power turned off?
The KURO LINK function may not work if three or
more players, including this player, are connected
by HDMI cable.
The message CEC200 appears.
When the Disc Navigator is selected using the
Flat Screen TV’s remote controller, the message
CEC200 is displayed if the player’s power is turned
off. This is not a malfunction. You may continue
using the player and Flat Screen TV as such.
En
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code Table and Country/Area Code Table
Language Code Table
Language names (codes) and input codes
Japanese (ja), 1001
English (en), 0514
French (fr), 0618
Bhutani (dz), 0426
Esperanto (eo), 0515
Estonian (et), 0520
Basque (eu), 0521
Persian (fa), 0601
Finnish (fi), 0609
Kirghiz (ky), 1125
Latin (la), 1201
Lingala (ln), 1214
Sinhalese (si), 1909
Slovak (sk), 1911
Slovenian (sl), 1912
Samoan (sm), 1913
Shona (sn), 1914
Somali (so), 1915
Albanian (sq), 1917
Serbian (sr), 1918
Siswati (ss), 1919
Sesotho (st), 1920
Sundanese (su), 1921
Swahili (sw), 1923
Tamil (ta), 2001
German (de), 0405
Italian (it), 0920
Laothian (lo), 1215
Lithuanian (lt), 1220
Latvian (lv), 1222
Malagasy (mg), 1307
Maori (mi), 1309
Macedonian (mk), 1311
Malayalam (ml), 1312
Mongolian (mn), 1314
Moldavian (mo), 1315
Marathi (mr), 1318
Malay (ms), 1319
Maltese (mt), 1320
Burmese (my), 1325
Nauru (na), 1401
Spanish (es), 0519
Chinese (zh), 2608
Dutch (nl), 1412
Portuguese (pt), 1620
Swedish (sv), 1922
Russian (ru), 1821
Korean (ko), 1115
Greek (el), 0512
Fiji (fj), 0610
Faroese (fo), 0615
Frisian (fy), 0625
Irish (ga), 0701
Scots-Gaelic (gd), 0704
Galician (gl), 0712
Guarani (gn), 0714
Gujarati (gu), 0721
Hausa (ha), 0801
Afar (aa), 0101
Telugu (te), 2005
Tajik (tg), 2007
Thai (th), 2008
Abkhazian (ab), 0102
Afrikaans (af), 0106
Amharic (am), 0113
Arabic (ar), 0118
Hindi (hi), 0809
Croatian (hr), 0818
Hungarian (hu), 0821
Armenian (hy), 0825
Interlingua (ia), 0901
Interlingue (ie), 0905
Inupiak (ik), 0911
Indonesian (in), 0914
Icelandic (is), 0919
Hebrew (iw), 0923
Yiddish (ji), 1009
Javanese (jw), 1023
Georgian (ka), 1101
Kazakh (kk), 1111
Greenlandic (kl), 1112
Cambodian (km), 1113
Kannada (kn), 1114
Kashmiri (ks), 1119
Kurdish (ku), 1121
Tigrinya (ti), 2009
Turkmen (tk), 2011
Tagalog (tl), 2012
Setswana (tn), 2014
Tonga (to), 2015
Turkish (tr), 2018
Tsonga (ts), 2019
Tatar (tt), 2020
Twi (tw), 2023
Ukrainian (uk), 2111
Urdu (ur), 2118
Uzbek (uz), 2126
Vietnamese (vi), 2209
Volapük (vo), 2215
Wolof (wo), 2315
Xhosa (xh), 2408
Yoruba (yo), 2515
Zulu (zu), 2621
Nepali (ne), 1405
Assamese (as), 0119
Aymara (ay), 0125
Azerbaijani (az), 0126
Bashkir (ba), 0201
Byelorussian (be), 0205
Bulgarian (bg), 0207
Bihari (bh), 0208
Bislama (bi), 0209
Bengali (bn), 0214
Tibetan (bo), 0215
Breton (br), 0218
Catalan (ca), 0301
Corsican (co), 0315
Czech (cs), 0319
Norwegian (no), 1415
Occitan (oc), 1503
Oromo (om), 1513
Oriya (or), 1518
Panjabi (pa), 1601
Polish (pl), 1612
Pashto, Pushto (ps), 1619
Quechua (qu), 1721
Rhaeto-Romance (rm), 1813
Kirundi (rn), 1814
Romanian (ro), 1815
Kinyarwanda (rw), 1823
Sanskrit (sa), 1901
Sindhi (sd), 1904
Welsh (cy), 0325
Danish (da), 0401
Sangho (sg), 1907
Serbo-Croatian (sh), 1908
Country/Area Code Table
Country/Area name, Input codes and Country/Area code
United States, 2119, us
Argentina, 0118, ar
United Kingdom, 0702, gb
Italy, 0920, it
Canada, 0301, ca
Korea, Republic of, 1118, kr
Singapore, 1907, sg
Switzerland, 0308, ch
Sweden, 1905, se
Spain, 0519, es
Chile, 0312, cl
Mexico, 1324, mx
Russian Federation, 1821, ru
Brazil, 0218, br
Denmark, 0411, dk
Germany, 0405, de
Japan, 1016, jp
New Zealand, 1426, nz
Norway, 1415, no
Pakistan, 1611, pk
Philippines, 1608, ph
Finland, 0609, fi
France, 0618, fr
India, 0914, in
Belgium, 0205, be
Portugal, 1620, pt
Hong Kong, 0811, hk
Malaysia, 1325, my
Indonesia, 0904, id
Australia, 0121, au
Austria, 0120, at
Thailand, 2008, th
Taiwan, 2023, tw
China, 0314, cn
Netherlands, 1412, nl
22
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the TV system
Cautions on use
If the picture of the disc being played is distorted,
switch the TV system to the one used in your country
or region.
When moving the player
When moving the player, check first that there is no
disc loaded and that the disc tray is closed. Then press
STANDBY/ON on the player (or STANDBY/ON on
the remote control), wait for the OFF indicator on the
front panel display to turn off, then unplug the power
cord. Moving the player with a disc inside it could result
in damage.
When the TV system is switched, the types of discs
that can be played are limited.
The factory default setting is AUTO.
1
Turn the player’s power off.
Press STANDBY/ON.
2
Press STANDBY/ON while pressing .
Place of installation
Use the buttons on the player’s front panel.
The power turns on and the TV system switches as
shown below.
Choose a stable place near the TV or stereo system
being used with the player.
AUTONTSC
NTSCPAL
PALAUTO
Do not place the player on top of a TV or color moni-
tor. Also install it away from cassette decks and
other devices easily affected by magnetic forces.
Avoid the following types of places:
Player setting
Types of
discs/files
Format
Places exposed to direct sunlight
Humid or poorly ventilated places
Extremely hot places
Places exposed to vibrations
Places in which there is much dust or cigarette
smoke
NTSC PAL
AUTO
NTSC
NTSC
NTSC
NTSC
PAL
PAL
PAL
PAL
Places exposed to soot, steam or heat (kitchens,
etc.)
—
NTSC
PAL
NTSC or PAL
Do not place objects on the player.
Do not place any objects on top of the player.
no disc
Do not obstruct the ventilation holes.
Do not use the player on shaggy rugs, beds, sofas, etc.,
or wrapped in cloth, etc. Doing so will prevent the heat
from dispersing, leading to damage.
Do not expose to heat.
Do not place the player on top of an amplifier or other
component that generates heat. When placing it in
a rack, to avoid the heat given off by the amplifier or
other audio component, place it on a shelf below the
amplifier.
Turn off the player’s power
when not using it.
Depending on signal conditions, striped patterns may
appear on a TV screen and noise may enter the sound of
radio broadcasts when the player’s power is on. If this
happens, turn the player’s power off.
En
23
Download from Www.Somanuals.com. All Manuals Search And Download.
About condensation
If the player is moved suddenly from a cold place into
a warm room (in winter, for example) or if the tempera-
ture in the room in which the player is installed rises
suddenly due to a heater, etc., water droplets (conden-
sation) may form inside (on operating parts and the
lens). When condensation is present, the player will not
operate properly and playback is not possible. Let the
player stand at room temperature for 1 or 2 hours with
the power turned on (the time depends on the extent
of condensation). The water droplets will dissipate and
playback will become possible. Condensation can also
occur in the summer if the player is exposed to the
direct wind from an air-conditioner. If this happens,
move the player to a different place.
Cleaning the product
Unplug the power cord from the power outlet when
cleaning the player.
Clean the player using a soft cloth. For tough dirt,
apply some neutral detergent diluted in 5 to 6 parts
water to a soft cloth, wring out thoroughly, wipe off
the dirt, then wipe again with a soft, dry cloth.
Alcohol, thinner, benzene, insecticides, etc., could
cause the print or paint to peel off. Also, leaving rub-
ber or vinyl products in contact with the player for
long periods of time could mar the cabinet.
When using chemical-impregnated wipes, etc., read
the cautions included with the wipes carefully.
Caution for when the unit is
installed in a rack with a glass
door
Do not press OPEN/CLOSE on the remote control to
open the disc tray while the glass door is closed. The
door will hamper the movement of the disc tray, and the
unit could be damaged.
Cleaning the lens
The player’s lens should not become dirty in normal
use, but if for some reason it should malfunction due
to dust or dirt, consult your nearest Pioneer authorized
service center. Although lens cleaners for players are
commercially available, we advise against using them
since some may damage the lens.
About copyrights
This product incorporates copyright protection technol-
ogy that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use
of this copyright protection technology must be autho-
rized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless oth-
erwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
24
En
Download from Www.Somanuals.com. All Manuals Search And Download.
About condensation on discs
Handling discs
Water droplets (condensation) may form on the surface
of discs if they are moved from a cold place (particu-
larly in winter) into a warm room. Discs may not play
normally if there is condensation on them. Carefully
wipe the water droplets off the surface of the disc before
loading it.
Storing
Always place discs in their cases and store them ver-
tically, avoiding hot, humid places, places exposed
to direct sunlight and extremely cold places.
Be sure to read the cautions included with the disc.
Cleaning discs
Discs may not play if there are fingerprints or dust
on them. In this case, use a cleaning cloth, etc., to
gently wipe the disc from the inside towards the
outside. Do not use dirty cleaning cloths.
Do not use benzene, thinner or other volatile
chemicals. Also do not use record spray or antistatic
agents.
For tough dirt, apply some water to a soft cloth,
wring out thoroughly, wipe off the dirt, then wipe off
the moisture with a dry cloth.
Do not use damaged (cracked or warped) discs.
Do not let the signal surface of discs get scratched
or dirty.
Do not place two discs in the disc tray, one on top of
the other.
Do not attach pieces of paper or stickers to discs.
Doing so could warp discs, making it impossible
to play them. Also note that rental discs often have
labels attached to them, and the label’s glue may
have oozed out. Check that there is no glue around
the edges of such labels before using rented discs.
About specially shaped discs
Specially shaped discs (heart-shaped, hexagonal, etc.)
cannot be played on this player. Do not attempt to play
such discs, as they could damage the player.
En
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Power requirements......... AC 110 V to 240 V, 50 Hz/60 Hz
Power consumption ..................................................... 11 W
Power consumption (standby)
DV-220KV-K .......................................................... 0.7 W
DV-120K-K............................................................. 0.6 W
Weight...........................................................................1.3 kg
External dimensions
.................................... 360 mm (W) x 42 mm (H) x 208 mm (D)
Tolerable operating temperature............. +5 °C to +35 °C
Tolerable operating humidity........................... 5 % to 85 %
(no condensation)
Video output
Output level ..................................................... 1 Vp-p (75 Ω)
Output terminal..............................................RCA terminal
Component video output (Y, CB/PB, CR/PR)
Y output level................................................... 1 Vp-p (75 Ω)
CB/PB, CR/PR output level ........................... 0.7 Vp-p (75 Ω)
Output terminal..............................................RCA terminal
HDMI output (DV-220KV-K only)
Output terminal...........................................................19-pin
Audio output (stereo L/R)
Audio output level.................... 200 mVrms (1 kHz, -20 dB)
Output terminal..............................................RCA terminal
Frequency response ..................................... 4 Hz to 44 kHz
S/N ratio......................................................................114 dB
Dynamic range.............................................................84 dB
Total harmonic distortion ..........................................0.01 %
Digital audio output
Coaxial digital output....................................RCA terminal
Additional information
USB port ......................................................................A type
Notes
The specifications and design of this product are
subject to change without notice.
This product includes FontAvenue® fonts licensed
by NEC Corporation. FontAvenue is a registered
trademark of NEC Corporation.
26
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Published by Pioneer Corporation.
Copyright © 2009 Pioneer Corporation.
All rights reserved.
K
J2M10501B SH09/06
PIONEER CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC.
P. O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901, 905-479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270
K002_B_En
Printed in Thailand
Download from Www.Somanuals.com. All Manuals Search And Download.
|