Panasonic DVD VCR Combo PV D4753S User Manual

DVD/VCR DECK  
Operating Instructions  
Model No. PV-D4753S  
Connections and Initial Setup Procedures are on pages 12 to 17.  
MULTI FORMAT PLAYBACK  
Ability to play back may depend on recording conditions.  
*
As an ENERGY STAR® Partner, Matsushita Electric Corporation  
of America has determined that this product or product model  
meets the ENERGY STAR® guidelines for energy efficiency.  
Please read these instructions carefully before attempting to connect, operate or adjust this  
product. Please save this manual.  
Spanish Quick Use Guide is included.  
(Guía para rápida consulta en español está incluida.)  
LSQT0675A  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions/Mesures de sécurité  
WARNING: To prevent fire or shock hazard, do not expose this  
equipment to rain or moisture.  
CAUTION: To prevent electric shock, match wide blade of plug to  
wide slot, fully insert.  
Avertissement: Afin de prévenir tout risque d’incendie ou de chocs  
électriques, ne pas exposer cet appareil à la pluie ou  
à une humidité excessive.  
Attention: Pour éviter les chocs électriques, introduire la lame la  
plus large de la fiche dans la borne correspondante de la  
prise et pousser jusqu’au fond.  
This symbol warns the user that uninsulated voltage  
within the unit may have sufficient magnitude to cause  
electric shock.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
Therefore, it is dangerous to make any kind of contact  
with any inside part of this unit.  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,  
DO NOT REMOVE COVER (OR BACK)  
This symbol alerts the user that important literature  
concerning the operation and maintenance of this unit  
has been included. Therefore, it should be read  
carefully in order to avoid any problems.  
NO USER-SERVICEABLE PARTS INSIDE  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL  
CAUTION:  
CAUTION:  
LASER RADIATION  
WHEN OPEN DO NOT  
UNIT IS A CLASS I LASER PRODUCT.  
HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD  
CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED.  
BE SURE TO OPERATE THE UNIT CORRECTLY AS INSTRUCTED.  
STARE INTO BEAM.  
ATTENTION:  
WHEN THIS UNIT IS PLUGGED TO THE WALL OUTLET, DO NOT PLACE  
YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER  
OPENINGS TO LOOK INTO THE INSIDE OF THIS UNIT.  
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF  
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN  
HAZARDOUS RADIATION EXPOSURE.  
RAYONNEMENT  
LASER EN CAS  
DOUVERTURE.  
NE PAS REGARDER  
DANS LE FAISCEAU.  
DO NOT OPEN COVERS AND DO NOT ATTEMPT TO REPAIR YOURSELF.  
REFER SERVICING TO QUALIFIED PERSONNEL.  
(Inside of product)  
FCC NOTE:  
This equipment has been tested and found to comply with part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference when operated in a residential  
environment. If this equipment does cause interference to radio or television reception, which can be  
determined by turning the equipment off and on, use the equipment in another location and/or utilize  
an electrical outlet different from that used by the receiver.  
If necessary, consult the dealer or an experienced radio/TV technician for help. The user may find the  
booklet, Something About Interferenceavailable from FCC local regional offices helpful.  
FCC Caution:  
To assure continued compliance, (example- use only shielded interface cables when connecting to  
other devices.) Any changes or modifications not expressly approved by the party responsible for  
compliance could void the users authority to operate this equipment.  
FCC Warning: Any unauthorized changes or modifications to this equipment would void the users  
authority to operate.  
Region Management Information:  
This DECK is designed and manufactured to respond to the  
Region Management Information that is recorded on a DVD  
disc. If the Region number described on the DVD disc does  
not correspond to the Region number of this DECK, this  
DECK cannot play this disc.  
Example:  
1
2
1
ALL  
4
GThe Region number for this DECK is 1.  
GThe Player will play DVD-Video marked with labels  
containing 1or ALL.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Before Using  
Disc formats supported by this DECK  
Congratulations  
DECK can play back discs bearing any of the following  
on your purchase of one of the most  
[Discs Played 8cm (3") or 12cm (5")]  
Disc type  
marks:  
sophisticated and reliable products on the  
market today. Used properly, it will bring you  
years of enjoyment. Please fill in the  
Logo  
DVD (DVD-Video)  
information below. The serial number is on the  
tag located on the back of your DECK.  
DVD-R (DVD-Video formatted  
discs [finalized])  
Date of Purchase  
Dealer Purchased From  
Dealer Address  
DVD-Audio  
Dealer Phone No.  
Video CD  
PV-D4753S  
Model No.  
CD (CD-DA)  
Serial No.  
CD-R/CD-RW (CD-DA,Video CD  
formatted discs [finalized])  
Accessories  
WMA, MP3, JPEG  
Discs which cannot be played  
Remote Control  
LSSQ0377  
Batteries 2 AA”  
DVD with Region No. other than 1or ALL”  
PAL discs (the audio on DVD-Audio can be played),  
DVD-RAM, DVD-ROM, DVD-RW, DVD+RW, CD-ROM,  
CDV, CD-G, CVD, SVCD, SACD, Divx Video Disc and  
Photo-CD  
Notes  
RF Coaxial Cable  
LSJA0372  
Do not use irregularly shaped discs (e.g. heart-  
shaped), as these can damage the unit.  
It may not be possible to play CD-R, CD-RW and  
DVD-R in all cases due to the type of disc or  
condition of the recording.  
Disc Handling  
Handling precautions  
Sticking a label on the disc may impair DVD-R playback.  
Do not attach sticker to discs. (Do not use discs with  
exposed adhesive from tape or left over peeled-off  
stickers.)  
Only hold disc by edges as shown below. Fingerprints,  
dirt and scratches can cause skipping and distortion.  
Do not write on label side of disc.  
Never use record cleaning sprays, benzine, thinner,  
static electricity prevention liquids, or any other solvent.  
To order accessories, call toll free  
1-800-332-5368.  
Loading the Batteries  
Disc tray  
Disc  
1) Open cover.  
Do not try to close disc tray when  
disc is not properly placed.  
To clean disc surface  
With a soft, damp (water only) cloth, gently  
wipe from the center hole to the outer edge  
as shown below. (Wiping in a circular  
pattern will scratch the surface.)  
2) Insert  
batteries as  
marked.  
If disc is brought from a cold to a  
warm environment, moisture may  
3) Close cover.  
form on the disc  
Wipe away moisture with a soft, dry, lint-free cloth  
before using disc. (See above.)  
Improper disc storage  
Battery replacement caution  
Discs could be damaged if stored or left in areas:  
exposed to direct sunlight.  
Do not mix old and new batteries.  
Do not mix alkaline with manganese  
batteries.  
that are humid or dusty.  
near heat (i.e. heater, radiator, etc.).  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Table of Contents  
DVD / VCR  
Important Safeguards and Precautions ............................ 2, 3  
Before Using ............................................................................4  
DECK & Cassette Information ........................................... 6 , 7  
Location of Controls ....................................................... 8 ~ 10  
Displays (On Screen Displays and Multi Function Display) .................... 11  
Connections .................................................................. 12 ~ 15  
Initial Setup for Basic Connections (Ready to Play) .......... 16, 17  
VCR  
Reset Language, Channels, Clock, VCRs Output Channel ... 18, 19  
Playback/ Record on a Tape........................................... 20, 21  
DVD  
Basic DVD Operation ...................................................... 22, 23  
Timer Recording.............................................................. 24, 25  
MTS Broadcast/ VHS Hi-Fi Stereo System .................... 26, 27  
Multi-Brand Control Feature ........................................... 28, 29  
Tape Operation (Search System) ....................................... 30 ~ 32  
Special VCR Features ..................................................... 33, 34  
Copying Your Tapes (Dubbing) ......................................................... 35  
Disc Operation ............................................................... 36 ~ 41  
DVD Operation using On-Screen Displays ................. 42 ~ 44  
MP3/WMA/JPEG Playback Operation .......................... 45 ~ 47  
DVD Lock Feature ................................................................. 48  
Settings for DVD Operation .......................................... 49 ~ 53  
Language Code List.............................................................. 54  
DVD / VCR  
Warning and Instruction Displays........................................ 55  
Before Requesting Service............................................. 56, 57  
Limited Warranty ............................................................. 58, 59  
Customer Services Directory ...............................................59  
Spanish (Español) Quick Use Guide............................. 60~ 65  
Index................................................................................. 66, 67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
DECK & Cassette Information  
Head Cleaning  
Prevent Accidental Tape Erasure  
Playing older or damaged tapes may eventually  
cause video heads to become clogged.  
Break off the tab to  
prevent recording.  
Video Head Clog Sensor  
Record Tab  
Screw driver  
During playback, this  
screen appears if  
V
I
D
EO HEADS  
EED CLE NG  
NSERT HEAD  
NG CASSETT  
OR REFER MANUAL  
MAY  
N
A
N
I
clogging is detected.  
To remove screen,  
press PLAY on the  
remote or DECK.  
PLEASE  
CLE  
I
A
N
I
E
T
O
END  
:
PLAY  
Torecordagain  
Use drytype head cleaning cassette  
only. (Part No. NV-TCL30PT is recommended.)  
Follow cleaning tape instructions carefully.  
Excessive use of tape can shorten head life.  
If head clog symptoms persist, contact your  
nearest servicenter by visiting our Web Site  
(see p. 59).  
Cover the hole  
with cellophane tape.  
Record/ Playback Time  
Only use tapes with the  
mark in this DECK.  
Type of Video Cassette  
Tape Speed  
Setting  
T60  
T120  
T160  
2 Hours  
SP  
1 Hour  
2 Hours  
40 Minutes  
(Standard Play)  
LP  
5 Hours  
2 Hours 4 Hours  
3 Hours 6 Hours  
(Long Play)  
20 Minutes  
SLP  
8 Hours  
(SuperLongPlay)  
Cleaning DECK  
Use a soft cloth or dusting attachment of a vacuum cleaner to remove dust from the ventilation holes  
on the back sides and bottom of the cabinet. Plastic surfaces are easily scratched and can be  
marred by alcohol and various solvents. Avoid excessive use of oil-based furniture polishes since  
the materials used in the cabinet will accumulate more dust. We recommend using a non-abrasive,  
antistatic cleaner and polisher.  
Features for a Quality Picture (VCR)  
Digital Auto Picture  
Automatically controls the video output signal for less noise depending on the tape condition.  
Digital Auto Tracking  
Continuously analyzes the signal and adjusts for optimum picture quality.  
Manual Tracking Control  
(to reduce picture noise)  
Use during Playback and Slow Motion mode to reduce picture noise.  
Press CH (TRACKING)  
/
on the remote control or on DECK until the picture clears up.  
To return to Auto Tracking, press POWER off, then on again a few seconds later.  
R
R
R
R
R
R
R
R
V-Lock Control (to reduce picture jitter)  
In Still mode, CH (TRACKING) operate as a V-Lock control.  
/
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Specifications  
Power Source:  
Power Consumption:  
120 V AC, 60 Hz  
Power On: Approx. 32 watts, Power Off: Approx. 4 watts  
Video Signal:  
EIA Standard NTSC color  
Video Recording System: 4 rotary heads helical scanning system  
Audio Track:  
1 track (Normal), 2 channel (Hi-Fi Audio Sound)  
Tuner:  
Broadcast Channels:  
CABLE Channels:  
VHF 2 ~ 13, UHF 14 ~ 69  
Midband A through I (14 ~ 22), Superband J through W (23 ~ 36)  
Hyperband AA ~ EEE (37 ~ 64), Lowband A-5 ~ A-1 (95 ~ 99)  
Special CABLE channel 5A (01), Ultraband 65 ~ 94, 100 ~ 125  
Input/Output Terminal:  
Input Terminal:  
Output Terminal:  
Audio/Video Line Input/Output, RF Input/Output  
Audio/Video Line Input (Front)  
S-Video Output (DVD only), Component Video Output (DVD only)  
Audio Output 2 (L), (R)  
Operating Temperature:  
Operating Humidity:  
Weight:  
5 °C ~ 40 °C (41 °F ~ 104 °F)  
10 % ~ 75 %  
4.9 kg (10.8 lbs).  
430 (W) x 95.5 (H) x 344 (D) mm  
16-15/16(W) x 3-12/16(H) x 13-9/16(D) inch  
Dimensions:  
Discs Played  
(1) DVD-Video Disc  
DVD-Audio Disc  
5(12 cm) single-sided single-layer  
5(12 cm) single-sided double-layer  
5(12 cm) double-sided double-layer (one layer per side)  
3(8 cm) single-sided single-layer  
3(8 cm) single-sided double-layer  
3(8 cm) double-sided double-layer (one layer per side)  
5(12 cm) disc  
(2) Compact Disc  
(CD-DA, Video CD)  
(CD-R/CD-RW, MP3,WMA, JPEG)  
3(8 cm) disc  
Digital Audio Output:  
Pickup:  
Digital Optical Connector  
Wavelength: 655 nm (DVD), 790 nm (Video CD/CD)  
Laser power: CLASS II  
Note: Designs and specifications are subject to change without notice.  
Definition of Terms (DVD)  
Angle:  
Some DVD discs feature scenes simultaneously shot from different angles.  
The ANGLE button can be used to view the scene from different angles.  
(ANGLE Indicator lights on DECK when a scene recorded at different  
angles is detected.)  
Chapter Number:Titles are subdivided into numbered sections. You can quickly search for  
a favorite scene using these numbers.  
DVD:  
A high-density optical disc on which high-quality pictures and sound have  
been digitally recorded. DVD incorporates new video compression  
technology (MPEG II) and high-density recording technology which allow  
entire movies to be recorded with incredible playback quality.  
Playback Control:With Video CD (version 2.0), scenes or information may be selected for  
viewing or listening from an interactive menu that appears on the TV screen.  
Subtitles:  
Time Number:  
Written dialogue which appears at the bottom of the screen.  
The elapsed play time from the start of a disc or title. Use to quickly find  
scenes. (May not work with some discs.)  
Title Number:  
For DVD discs with two or more titles, the title is numbered as title 1, title 2, etc.  
Track Number: Numbers assigned to tracks on Video CDs and CDs to allow specific tracks  
to be quickly located.  
CD containing picture and sound with same quality level as video tape.  
This DECK also supports Video CDs with playback control (version 2.0).  
Video CD:  
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098 and 4,907,093,  
licensed for limited viewing uses only.  
This product incorporates copyright protection technology that is protected by method claims of  
certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and  
other rights owners. Use of this copyright protection technology must be authorized by Macrovision  
Corporation, and is intended for home and other limited viewing uses only unless otherwise  
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Location of Controls  
Bold:  
VCR Function  
Remote Control  
Italic:  
DVD Function  
Bold Italic: VCR and DVD Functions  
Normal:  
Others  
EJECT  
/
DISPLAY  
p. 11, 42  
OPEN  
/
CLOSE  
pp. 20, 22  
TV mode  
POWER  
p. 28  
VCR mode  
DVD mode  
p. 28  
p. 28  
DSS  
/
CABLE mode  
INPUT  
p. 35  
p. 28  
PLAY  
FAST FORWARD  
/
pp. 20, 22  
SEARCH SLOW+  
/
pp. 20, 23  
REWIND  
SLOW-  
/
SEARCH  
/
PAUSE /STILL  
pp. 20, 23  
pp. 20, 23  
STOP  
VCR/TV  
pp. 20, 22  
p. 21  
ADD/DELETE  
/
CLEAR  
NUMBER keys  
pp. 19, 39, 48  
RETURN  
/
SEARCH  
Virtual Surround Sound (V.S.S.)  
/
pp. 22, 30  
ENTER  
pp. 23, 28  
ACTION  
pp. 18, 49  
PROGRAM  
p. 24  
SKIP  
SKIP  
p. 23  
SELECT  
MENU  
p. 38  
TITLE  
p. 38  
SET  
SUB TITLE  
p. 36  
ZOOM  
ANGLE  
p. 37  
p. 37  
COMMERCIAL SKIP  
/
AUDIO (SAP / Hi-Fi)  
ZERO SEARCH  
pp. 27, 36  
pp. 31, 32  
VOLUME  
+
/
-
CHANNEL  
/
p. 28  
TRACKING V-LOCK  
/
pp. 6, 21  
COUNTER  
RESET  
p. 32  
TAPE POSITION  
/
VOLUME ADJUST  
p. 34, 40  
SPEED  
/
PAGE  
p. 21, 41  
RECORD  
p. 21  
EJECT button: When this button is pressed in VCR mode, the tape is ejected.  
This button is inoperative if pressed during recording.  
If pressed in DVD mode, the disc tray opens or closes.  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
If the disc cannot be removed...  
Front View of DECK  
Front View of DECK  
First, unplug DECK. Then, prepare a rigid  
wire (e.g. an extended paper clip) and,  
applying moderate force, insert it straight  
into the hole at the base of the tray.  
The tray will eject a little. Now, pull the tray  
all the way out and remove the disc.  
Bold:  
Italic:  
VCR Function  
DVD Function  
Bold Italic: VCR and DVD Functions  
Normal: Others  
STOP/EJECT  
p. 20  
FAST FORWARD/SEARCH  
p. 20  
PLAY  
p. 20  
Over 2 inches  
REWIND/SEARCH  
p. 20  
Remote  
Cassette  
Compartment  
Disc Tray  
OPEN/CLOSE  
Sensor  
p. 22  
POWER  
Audio/Video  
Input Connector 2  
(LINE 2) p. 35  
PROGRESSIVE  
Multi Function  
Display  
p. 10  
CHANNEL  
/
p. 11  
PAUSE  
TRACKING/V-LOCK  
pp. 6, 21  
p. 23  
SKIP  
REC  
p. 21  
SKIP  
p. 23  
PLAY  
p. 22  
STOP  
p. 22  
Reset All Memory Functions  
Use when moving DECK to new location, or if a mistake was made in the Initial  
Setup section (return to Factory Setting).  
Make sure a tape is not inserted in the DECK.  
Turn DECK Power on.  
1
2
Press and hold both VCR PLAY  
and CHANNEL  
on the DECK for  
more than 5 seconds.  
The power shuts off.  
Do Initial Setup (Ready to Play)”  
on page 16.  
3
1 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
Location of Controls (continued)  
Bold:  
VCR Function  
Italic: DVD Function  
Rear View of DECK  
Bold Italic: VCR and DVD Functions  
AC Power Plug  
While plugged into an AC outlet,  
this DECK consumes 4 W of  
electrical power in off mode.  
VHF/UHF Antenna Output Terminal  
p.12  
VHF/UHF Antenna Input Terminal  
p. 12  
Component Video Output  
Connector (Y, PB, PR) (DVD Only)  
p. 13  
VideoInput  
Connector  
p. 35  
VideoOutput  
Connector  
p. 12  
5.1ch Analog Audio Output  
Connector (CENTER, SUB WOOFER,  
SURROUND L/R, FRONT L/R)  
(DVD Only) p. 15  
Audio Input  
Connector (L/R)  
p. 35  
S-Video Out  
Connector  
(DVD Only)  
pp. 10, 13  
Audio Output 2  
Connector (L/R)  
p. 13  
Optical Digital Audio  
Output Connector  
(DVD Only)  
p. 15  
Audio Output 1  
Connector (L/R)  
p. 12  
The following table shows the status of the output jacks when in VCR or DVD mode.  
Video Output  
Component  
S-VIDEO OUT  
N/A  
Audio Out 1  
Audio Out 2  
Video Output  
VCR  
YES  
YES  
N/A  
DVD  
YES  
PROG functions on the remote are not available when using Component Video Output  
and S-VIDEO OUT. Please set TV to either RF INPUT or VIDEO INPUT, and then press  
PROG.  
Note  
To enjoy PROGRESSIVE SCAN video  
(1). Connect Component Video Output to the component video input terminals of a television.  
(See p. 13.)  
(2). When the PROGRESSIVE button is pressed, the ON lamp lights up (see p. 9) and the  
PROGRESSIVE SCAN signal is output from the Component Video Output Connector.  
Notes  
The PROGRESSIVE button can be operated when the DECK is in DVD function mode.  
The screen may shift off-center when using progressive output. Please adjust the screen  
position if this occurs. (Refer to your TV manual.)  
The DECK outputs video signals (not PROGRESSIVE SCAN) from the VIDEO OUTand  
S-VIDEO OUTterminals when the ON lamp is lit.  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Displays (On Screen & Multi Function)  
On Screen Displays (VCR)  
Function & Channel Displays  
When a function button  
Blank Tape/ No Video Signal  
Indications  
CH 08  
Whenever a blank section of a tape  
comes up in Play mode, or when the  
selected channel has no broadcast  
signal with Weak Signal Display  
Feature (p. 33) set to OFF, the TV  
screen will turn solid blue.  
is pressed, e.g. PLAY,  
or you change  
channels, a 5-second  
display appears.  
Current Time  
Channel  
Function Status  
VCR Status & Clock Displays  
To display or remove  
overlay at right,  
CH 02  
REC  
12:00AM  
-0  
:
12  
:
34  
SP  
Counter  
0: 25  
Rec Time Remaining  
(OTR mode only,  
see p. 21.)  
S
TEREO  
press DISPLAY.  
SAP  
ONO  
M
Broadcast Audio  
Being Received  
(See p. 26.)  
Tape Speed  
(See p. 6.)  
Multi Function Display  
Tape Indicator  
DISC Indicator  
DVD mode Indicator  
Lights up when  
DECK is DVD mode.  
VCR mode Indicator  
Lights up when  
DECK is VCR mode.  
Lights up when a tape Lights up when a  
is inserted.  
disc is inserted.  
CD/MP3/WMA  
Indicator  
CD :Lights when a  
Video or Audio  
CD is inserted  
or JPEG file is  
played.  
VCR REC Indicator  
Lights up during  
recording.  
Timer Indicator  
Lights up when  
DECK is set for  
Timer Recording,  
or when One  
Touch Recording  
(OTR) is used.  
Flashes when  
Timer Recording is  
set, but a tape has  
not been inserted  
into DECK and  
when a power  
DVD  
WMA  
ANGLE  
VCR  
CD  
MP3  
TIMER REC  
MP3/WMA :  
AM  
PM  
Hi - Fi  
Lights when an  
MP3 or WMA  
file is played.  
DIGITAL  
ANGLE Indicator  
Lights up when a  
scene recorded at  
different angles is  
detected.  
Hi-Fi Indicator  
Lights up when  
AM/PM  
Indicator  
interruption occurs  
during Timer  
Programming.  
Hi-Fi audio is  
monitored in Play  
mode.  
(See p. 37.)  
(DVD only).  
DTS Indicator  
Lights up when DTS  
formatted DVD is played.  
(DVD only)  
Clock/ Status/ Channel/ Speed Display  
Displays the current time. Briefly displays DECK  
status when a function button is pressed. Briefly  
displays the channel number, or L1or L2”  
when a channel or line input is selected. Briefly  
displays the recording speed when SPEED is  
pressed.  
Dolby Digital  
Indicator  
Lights up when Dolby Digital”  
formatted DVD is played.  
(DVD only)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
Connections  
Basic Connections  
If your TV has AUDIO and VIDEO IN terminals, connect them to DECK for higher  
quality picture and sound.  
You can enjoy stereo sound even if your TV is not stereo by connecting a stereo  
amplifier to DECK.  
a
b
Connect DECK and TV with an RF Coaxial Cable  
(supplied) or an AV Cable  
(not supplied) as shown in the figure below.  
I Cable Box DECK TV  
I DECK TV  
I DSS Receiver DECK TV  
Antenna or Cable  
DSS  
Receiver  
IN  
CableBox  
IN  
IN  
OUT  
OUT  
or  
1 Disconnect antenna or cable from TV  
and connect to DECK.  
2 Connect DECK to TV with RF Coaxial Cable.  
RF COAXIAL CABLE  
DVD/VCR DECK  
a
(supplied)  
TV  
IN FROM ANT.  
IN1  
OUT  
VIDEO  
AUDIO  
VHF/  
UHF  
VHF/UHF  
L
AUDIO IN VIDEO  
L
IN  
R
OUT TO TV  
R
b
AV CABLE (not supplied)  
WARNING  
When using Nut typeRF coaxial cables, tighten with  
fingers only. Overtightening may damage terminals.  
Note to CABLE system installer  
This reminder is provided to call the CABLE system installers attention to Article 820-40 of the  
NEC in USA (and to the Canadian Electrical Code in Canada) that provides guidelines for proper  
grounding and, in particular, specifies that the cable ground shall be connected to the grounding  
system of the building, as close to the point of cable entry as practical.  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Other Connections  
YouCan  
YouCannot  
I With a Cable Box (DECK Cable Box TV)  
view any  
(including  
scrambled)  
channel.  
record  
scrambled  
channels.  
DVD/VCR DECK  
ANT or CATV  
TV  
IN FROM ANT.  
IN1  
OUT  
IN OUT  
R
Cable Box  
IN OUT  
use Remote  
AUDIO  
VHF/  
UHF  
VHF/UHF  
OUT TOTV  
L
Control to select  
channels without  
using Multi-brand  
control feature.  
VIDEO  
I Connect With Two Cable Boxes  
YouCan  
YouCannot  
DVD/VCR DECK  
ANT  
record and view  
both scrambled  
andunscrambled  
channels if  
additional  
equipment is  
added.  
This connection  
requires: two  
converter boxes,  
an A/B switch,  
and a 2-way  
splitter.  
view a channel  
other than the  
one selected  
for any type of  
recording.  
IN FROM ANT.  
IN1  
OUT  
Cable Box  
or  
CATV  
IN OUT  
VHF/UHF  
OUTTOTV  
TV  
do a Timer  
IN OUT  
R
recording of a  
channel unless  
you select it on  
the Cable Box.  
2-Way Splitter  
A/B Switch  
AUDIO  
Cable Box  
L
OUT1  
OUT2  
VIDEO  
VHF/  
UHF  
IN OUT  
IN 1 IN 2  
Connections For DVD Only (enjoying higher picture quality)  
Connect AUDIO OUT2 (L, R) to the AUDIO IN (L, R) of the TV. (audio input for COMPONENT  
or S-VIDEO mode).  
If your TV has COMPONENT VIDEO INPUT, connect to COMPONENT VIDEO OUT.  
If your TV does not have COMPONENT VIDEO INPUT but has S-VIDEO INPUT, connect to  
S-VIDEO OUT.  
1
2
When in DVD mode, set your TV to either COMPONENT VIDEO IN or S-VIDEO IN.  
3
You can watch DVDs through the S-VIDEO or COMPONENT VIDEO, VHF/UHF OUT TO TV,  
Notes  
and VIDEO OUT connections to your TV. The VCR and TUNER pictures are available only  
from the VIDEO OUT and VHF/UHF OUT TO TV connections to your TV.  
PROG functions on the remote are not available when using S-VIDEO OUT and COMPONENT  
Video Output. Please set TV to either RF INPUT or VIDEO INPUT, and then press PROG.  
TV must have capability to accept and display a progressive scan signal to use  
PROGRESSIVE mode. Consult your TV operating instructions.  
From DECKs  
DVD/VCR DECK  
A/V OUTPUT  
TV  
COMPONENT  
VIDEOOUT  
DVD OUTPUT  
AUDIOOUT2  
IN  
IN  
IN  
Y
L
Y
AUDIO  
VIDEO  
R
PB  
PR  
L
P B  
P R  
S-VIDEO OUT  
S-VIDEO  
IN  
R
or  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
Connections (continued)  
Audio Connections  
ReadyChecklist  
Turn down the volume, then turn DECK, as well as other equipment to be connected,  
off before proceeding with connection.  
Do not block ventilation holes of any of the equipment and arrange them so that air can  
circulate freely.  
Read through the instructions before connecting other equipment.  
Ensure that you observe the color coding when connecting audio and video cables.  
I Connecting Amplifier (2ch stereo system)  
Speaker  
Speaker  
DVD/VCR DECK  
Amplifier  
AUDIO IN  
AUDIO OUT2  
R
L
L
R
Enjoying digital audio output from the digital audio output connector  
Notes on audio output from the optical digital audio output connector  
Disc  
DVD  
Optical digital audio output from connector  
Sound recording format  
Dolby Digital bitstream (1-5.1 ch)  
Dolby Digital  
or PCM (48 kHz sampling/16 bit only)*1  
Linear PCM  
(48/96/192/44.1/88.2/  
176.4 kHz 16/20/24bit)  
Linear PCM (2 ch)  
(48 kHz sampling/16 bit or 44.1 kHz sampling/  
16 bit)*2  
Bitstream or PCM (48 kHz sampling/16 bit only)*1  
PCM (44.1 kHz sampling)  
DTS  
MPEG 1  
Linear PCM  
Video CD  
CD  
Linear PCM (44.1 kHz sampling)  
Linear PCM (It depends on the MP3 file)  
MP3  
MP3  
Linear PCM (It depends on the WMA file)  
WMA  
WMA  
*1 The type of audio output from the connector can be selected by the Settings for DVD  
Operation. (See p. 50.)  
*2 Sound having 96/192 kHz sampling is converted into 48 kHz sampling (or 88.2/176.4 kHz  
sampling is converted into 44.1 kHz sampling) when it is output from the DECKs optical digital  
audio output connector.  
For your reference:  
Dolby Digital is a digital sound compression technique developed by the Dolby Laboratories  
Licensing Corporation. Supporting 5.1-channel surround sound, as well as stereo (2-channel)  
sound, this technique enables a large quantity of sound data to be efficiently recorded on a disc.  
Linear PCM is a signal recording format used in CDs. While CDs are recorded in 44.1 kHz/16 bit,  
DVDs are recorded in 44.1 kHz/16 bit ~ 192 kHz/24 bit.  
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,674,  
5,974,380, 5,978,762 and other world-wide patents issued and pending. DTSand DTS Digital  
Surroundare registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2000  
Digital Theater Systems, Inc. All rights reserved.  
Manufactured under license from Dolby Laboratories.  
Dolbyand the double-D symbol are trademarks of Dolby Laboratories.  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
I Connecting Amplifier (5.1 ch Surround system)  
Enjoy the powerful movie theater and hall-like sound available with multiple  
channel audio found on DVDs by connecting an amplifier and speakers.  
There are two types of connection, digital and analog.  
A. Digital connection (DECK OPTICAL Digital Audio Output Connector)  
When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital bitstream or DTS  
bitstream is output from the DECK OPTICAL Digital Audio Output Connector. When DECK  
is connected to a Dolby Digital decoder or DTS decoder, you can enjoy theater-quality  
audio in your home. [An optical digital audio cable (optional) is required when an optional  
Dolby Digital decoder or DTS decoder is used.]  
B. Analog connection (5.1 ch Analog Audio Output Connector)  
Connect an amplifier with multi-channel audio input terminals. This DECK can decode  
Dolby Digital and DTS. There are no limitations on sampling frequency with this kind of  
connection.  
Surround  
Speaker  
Surround  
Speaker  
Notes on connecting an optical  
digital audio cable (optional)  
[5.1 ch Surround system]  
Firmly connect the cable to the  
connector.  
Center  
Speaker  
Front  
Speaker  
Front  
Speaker  
Amplifier  
B. Analog connection  
To multi-channel audio  
input terminals  
Subwoofer  
DVD/VCR DECK (Rear)  
Decoder with Dolby Digital  
/DTSprocessing  
A. Digital connection  
Optical Digital Audio  
Cable(optional)  
To Optical Digital Audio  
Input Connector  
Caution for optical digital audio output connector:  
When connecting an amplifier (with an Optical Digital Input Connector) which does not  
contain the Dolby Digital or DTS decoder, be sure to select PCMat Dolby Digital”  
and PCMat dtsof the Settings for DVD Operation Audio Output(see p. 50).  
Otherwise, any attempt to play DVDs may cause such a high level of noise that it may  
be harmful to your ears and damage your speakers.  
When a Dolby Digital/DTS decoder is connected, please select Bitstreamat dtsor  
Dolby Digitalof the Settings for DVD Operation Audio Output.  
If PCMis selected, there will be stereo sound. (See p. 50.)  
Video CDs and CDs can be played as usual.  
Note:  
Some DTS decoders which do not support DVD-DTS interface may not work properly with  
DECK.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Initial Setup for Basic Connections (Ready to Play)  
Before doing Initial Setup  
Turn TV on.  
1
a
b
See connections  
RF Coaxial Cable Connection and  
AV Cable Connection on page 12.  
2 <RF Coaxial Cable Connection>  
Set TV to channel 3.  
<AV Cable Connection>  
Set TV to VIDEO.  
[DECK TV]  
Go to Initial Setup (Ready to Play).(See below.)  
3
[Cable Box DECK TV], [DSS DECK TV]  
Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel  
in your time zone.  
If you use a DSS Receiver, it must be turned off.  
Initial Setup (Ready to Play)  
Press VCR on remote for VCR mode.  
1
2
Plug DECK Power Cord into AC wall outlet. DECK comes on and auto channel  
and clock set starts.  
If screen below does not appear, check DECK - TV connection and, if TV is tuned to  
channel 3, try switching it to channel 4.  
To change VCRs output channel, please refer to VCRs Output Channelon page 19.  
Plugging the AC Power Plug into  
an AC outlet.  
Notes  
CH AUTO SET PROCEEDING  
Function buttons are inoperative during Initial Setup.  
CANCEL : STOP  
To remove a cassette during Auto Set, press EJECT on  
the remote or STOP/EJECT twice on the DECK.  
In this case, settings must be made manually. (See p. 18.)  
Depending on conditions, Auto Clock Set may take longer  
than 30 minutes. If so, press STOP to stop setup and  
perform settings manually. (See p. 18.)  
AUTO CLOCK SET  
PROCEEDING  
CANCEL : STOP  
Continued on next page...  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
*Important: If a remote control button does not work when pressed,  
press the VCR button on the remote and try the button again.  
Settings are made automatically.  
When setup is done, this screen appears.  
3
6
/
8
/
2003 SUN  
2
S
:
20P  
M
D
T
:
ON  
EJECT  
VCR  
SETT  
AUTO CLOCK SET  
PLETED  
I
N
G
:
CH 10  
C
OM  
If AUTO CLOCK SET IS INCOMPLETE”  
appears, manually set clock. See below.  
AUTO CLOCK SET IS  
ACTION  
SELECT  
I
NCOMPLETE  
PLEASE SET CLOCK BY  
PRESSING ACT ON KEY  
I
SET  
Manual Clock Set  
If Auto Clock Set was incomplete.  
Press ACTION* on remote to display  
CLOCK screen.  
1
SET  
CLOCK  
:
1/  
/
----------------D--S-T-:O-N--  
SE  
L
EC  
T
M
ONTH  
SELE  
SET  
CT  
:
:
SET  
ACT  
EXIT  
:
I
ON  
Press  
to select the month and SET to  
STOP  
set. In the same manner, select and set the  
date, year, time, and DST (Daylight Saving  
Time).  
2
SET  
CLOCK  
6
/
8
/
2003 SUN  
2
:
20  
PM  
ST:  
----------------D----O--N-  
SET CO  
M
P
LE  
TE  
D
S
ET  
: SET  
ACT  
BACK :  
ST  
ART  
:
I
ON  
Press ACTION to start clock and exit.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
Reset Language, Channels, Clock,  
MENU  
PROGRAM functions are not available  
Press ACTION*  
to display MENU.  
SET UP VCR  
when using COMPONENT Video Output  
and S-VIDEO OUT. Please set TV to  
either RF INPUT or VIDEO INPUT, and  
then press PROGRAM.  
1
SET CLOCK  
SET UP CHANNEL  
IDIOMA/LANGUE : ENGLISH  
VCRS OUTPUT CH:3  
SELECT :  
EXIT  
SET:SET  
: ACTION  
Language  
Channels  
Clock  
2
1) Press  
to select  
1) Press  
to select  
1) Press  
to select  
SET UP CHANNEL,”  
language item.  
SET CLOCK,and  
and press SET.  
press SET.  
MENU  
MENU  
MENU  
SET UP VCR  
SET UP VCR  
SET UP VCR  
SET CLOCK  
SET CLOCK  
SET CLOCK  
SET UP CHANNEL  
IDIOMA/LANGUE : ENGLISH  
VCRS OUTPUT CH:3  
SET UP CHANNEL  
IDIOMA/LANGUE : ENGLISH  
VCRS OUTPUT CH:3  
SET UP CHANNEL  
IDIOMA/LANGUE : ENGLISH  
VCRS OUTPUT CH:3  
SELECT :  
EXIT : ACTION  
SET:SET  
SELECT :  
SET : SET  
SELECT :  
SET : SET  
EXIT  
: ACTION  
EXIT  
: ACTION  
2) Press  
to select  
2) Press SET repeatedly to  
change language item as  
shown below.  
2) Press  
to select  
MANUAL,and press SET.  
(For Auto Clock Set, select  
AUTO CLOCK SET.)  
ANTENNA,then  
press SET to set your  
antenna system  
MENU  
PREPARAR VCR  
FIJAR RELOJ  
FIJAR CANAL  
LANGUE/LANGUAGE:ESPAÑOL  
CANAL DE SALIDA : 3  
(TVor CABLE.)  
SET  
CLOCK  
SET UP CH  
ANNEL  
ANTENN CABLE  
A
:
AUT  
O
C
L
OC  
K
SET  
JUS  
A
U
T
O
SET  
M
A
NUAL  
W
EA  
ABLE  
CR Plus  
K
SIGNAL DISPLAY : OFF  
T
I
M
E
ZO  
N
E
A
D
T
:
0
C
V
/
DSS SET UP  
BOX  
ELEGIR :  
SALIR  
+
C
H
SET UP  
FIJAR : SET  
: ACTION  
SELE  
CT  
:
:
SET SET  
:
EXIT  
ACT  
I
ON  
SELE  
C
T
:
:
SET  
:
SET  
For Spanish  
EXIT  
ACT  
I
ON  
(TIME ZONE ADJUST”  
appears only when auto  
clock is set.)  
MENU  
3) Press  
to select  
REGLAGE MAGNETOSCOPE  
REGLAGE HORLOGE  
REGLAGE CANAL  
AUTO SET,then  
LANGUAGE/IDIOMA:FRANÇAIS  
CA SORTIE : 3  
press SET.  
SET  
CLOCK  
If you use a Cable Box,  
set it to the PBS channel  
in your time zone.  
6
/
8
/
2003 SUN 12  
:
00  
P
M
SEL.  
:
REGLER:SET  
ST:  
----------------D----O--N-  
QUITTER : ACTION  
SELECT  
HOUR  
For French  
SELE  
CT  
:
:
:
SET  
SET  
ACT  
BACK :  
EXIT  
I
ON  
MENU  
SET UP VCR  
SET CLOCK  
3) Press  
and to  
SET UP CHANNEL  
IDIOMA/LANGUE : ENGLISH  
VCRS OUTPUT CH:3  
CH AUTO SET PROCEEDING  
CANCEL : STOP  
select, then set the date,  
time, and DST (Daylight  
Saving Time).  
SELECT :  
EXIT : ACTION  
SET:SET  
After Channel Auto Set  
is finished, Auto Clock  
Set will be performed.  
For English  
3) Press ACTION to exit.  
4) Press ACTION to start  
Clock and exit this  
mode.  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
VCRs Output Channel  
*Important: If a remote control button does not work  
when pressed, press the VCR button  
POWER  
VCR  
on the remote and try the button again.  
NUMBER  
keys  
Time Zone Adjust  
VCRs Output  
Channel  
(Only when Auto Clock is set.)  
1) Press  
to select  
VCRS OUTPUT CH.,”  
and press SET.  
1) Press  
to select  
SET CLOCK,and  
ACTION  
ADD/DLT  
SELECT  
press SET.  
MENU  
MENU  
SET UP VCR  
SET CLOCK  
SET UP VCR  
SET CLOCK  
SET UP CHANNEL  
IDIOMA/LANGUE : ENGLISH  
VCRS OUTPUT CH:3  
SET UP CHANNEL  
IDIOMA/LANGUE : ENGLISH  
VCRS OUTPUT CH:3  
SET  
SELECT :  
SELECT :  
SET : SET  
SET : SET  
EXIT  
: ACTION  
EXIT  
: ACTION  
CH  
/
2) Press SET.  
2) Press  
to select  
TIME ZONE ADJUST,”  
I F YOU PRESS ACT  
KEY, VCRS UTPUT CH  
ITCHES CH  
I
ON  
SET  
CLOCK  
Add or Delete a Channel  
O
O
S
W
T
4.  
AUT  
O
C
L
OC  
K
SET  
To add channel:  
Select channel with NUMBER keys  
and press ADD/DLT.  
M
ANUAL  
T
I
M
E
ZO  
NE  
A
D
JUS  
T
:
0
3) Press ACTION.  
SELE  
C
T
:
:
SET SET  
:
EXIT  
ACT  
I
ON  
CHANNEL 08 ADDED  
PLEASE TUNE  
CH  
YOUR TV TO  
4
.
and press SET to  
subtract or add hour(s)  
as necessary.  
To delete channel:  
Select channel with CH  
/
or  
NUMBER keys and press ADD/DLT.  
After 3 seconds  
3) Press ACTION twice.  
C
HANNEL 08 DE  
L
E
TED  
• “TIME ZONE ADJUST”  
returns to 0if clock is  
set manually.  
MENU  
SET UP VCR  
SET CLOCK  
SET UP CHANNEL  
IDIOMA/LANGUE : ENGLISH  
VCRS OUTPUT CH:4  
DST (Daylight Saving Time)  
SELECT :  
EXIT : ACTION  
SET : SET  
DECK auto adjusts clock for DST.  
(p. 17.)  
To Make Corrections,  
repeat steps 1) ~ 3).  
Spring (First Sunday in April)  
DST:ON Sets clock ahead one hour.  
Autumn (Last Sunday in October)  
DST:ON Turns clock back one hour.  
If your area does not observe  
Daylight Saving Time, select  
DST:OFF.  
Keep these time changes in mind  
when programming DECK for  
timer recordings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
Playback/ Record on a Tape  
EJECT  
DVD  
Ready Checklist  
All connections are made. (pp. 12 ~ 15)  
TV and DECK are plugged in.  
TV is on and tuned to CH 3, 4, or VIDEO.  
Remote is in VCR mode. (Press VCR.)  
PLAY  
VCR  
FF/SLOW+  
PAUSE/  
STILL  
REW/SLOW-  
VCR/TV  
STOP  
Playback a Tape  
Insert a tape.  
1 DECK power comes on. If Auto VCR/TV (see  
p. 32) is set to OFF,press VCR/TV on the  
remote to be VCR mode.  
Press PLAY* to play a tape.  
If tape has no rec. tab (p. 6), auto play begins.  
2
Special Features During Play  
Forward/Reverse Scene Search  
Press FF/SLOW+ or REW/SLOW-.  
Press PLAY to release.  
After search has begun, each additional press of  
FF or REW changes speed as shown below.  
CH  
/
REC  
SPEED  
[SLP] : Approx. 21X Approx. 9X  
[LP] : Approx. 9X Approx. 7X  
[SP] : Approx. 7X Approx. 3X  
If at 21X, 9X, or 7X speed the picture is  
interrupted, change speed to 9X, 7X, or 3X.  
Notes  
These features work best in SP or SLP mode.  
The sound will be muted.  
To reduce picture noise, see Manual Tracking  
Controlon page 6.  
After DECK is in Still or Slow mode for 3 minutes,  
it will switch to Stop mode automatically to  
protect the tape and the video head.  
Notes  
Picture interruption may occur with some TVs.  
FF and REW search speed may vary  
depending on current tape position.  
Still (Freeze) Picture  
Press PAUSE/STILL.  
Press PLAY to release.  
Frame by Frame Picture  
Press PAUSE/STILL in Still mode.  
Press PLAY to release.  
Playback using DECK buttons  
Slow Motion Picture  
Press FF/SLOW+ (increase speed) or  
REW/SLOW- (decrease speed) in Still  
mode.  
2Press PLAY. 1Insert a tape.  
Press PLAY to release.  
Press STOP to stop a tape.  
3
Multi Function Display  
Press REW/SLOW- or FF/SLOW+ in Stop  
mode to rewind or fast forward a tape.  
Press STOP/EJECT to stop  
and/ or eject a tape.  
Press EJECT on remote, or STOP/EJECT  
on DECK to eject a tape.  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
*Important: If a remote control button does not work when pressed,  
press the VCR button on the remote and try the button again.  
Record on aTape  
This video recorder, equipped with HQ  
(High Quality) system, is compatible  
with existing VHS equipment. Only use  
Insert a tape with a record tab (p. 6).  
1
2
DECK power comes on. If Auto VCR/TV (see p. 32)  
is set to OFF,press VCR/TV on the remote to be  
VCR mode.  
tapes with the  
mark. Only tapes  
tested and inspected for use in 2, 4, 6,  
and 8 hour machines are  
recommended.  
Press CH  
, or NUMBER keys  
to select the channel.  
For LINEinput, see p. 35.  
If channel is over 100, press 100 key then press  
the remaining 2 digits.  
Note  
Remove loose or peeling  
labels from tapes to prevent  
tape jam.  
Press SPEED  
to select the record speed (p. 6).  
SP = Standard Play  
SLP = Super Long Play  
Speed appears on-screen and on Multi Function Display.  
3
4
LP = Long Play  
Press REC  
to start recording.  
(The VCR REC indicator lights up on Multi Function  
Display),  
To edit out unwanted scenes, press PAUSE/STILL  
to pause, and again to resume recording.  
You cannot view another channel during recording.  
Press STOP  
to stop recording.  
5
One Touch Recording (recording in progress),  
Normal Rec  
4:00 3:00  
0:30  
2:00  
1:00  
1:30  
press REC repeatedly to set the recording length  
(30 min. ~ 4 hours).  
DECK shuts off after the preset record length.  
Record one station, watch another,  
press VCR/TV on the remote  
(change to TV mode),  
Record using DECK buttons  
select channels at TV (recording continues).  
Select Channels at DECK (In STOP or  
Insert a tape.  
Press REC  
to start  
recording.  
1
4
REC. PAUSE mode),  
press VCR/TV on the remote  
(change to TV mode),  
select channels at DECK.  
Play a disc while recording a tape.  
insert a disc during recording,  
press DVD, and then press PLAY.  
Multi Function Display  
Notes  
Select  
Channel.  
2
It is not possible to record from DVD/ Video  
CD/ CD to VHS tape using DECK.  
Watching one channel and recording another  
is not possible when using Cable Box or  
DSS Receiver.  
Press STOP/EJECT to stop.  
After 5 minutes in Pause mode, DECK stops to  
protect a tape and video heads.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
Basic DVD Operation  
Press POWER* on the remote or DECK.  
Ready Checklist  
All connections are made. (pp. 12 ~ 15)  
DECK is plugged in.  
If DECK is connected to an audio amplifier,  
turn the stereo systems power on.  
1
2
Press DVD to select DVD mode.  
If a disc is already inserted, go to step 4.  
(Depending on the disc, playback may  
start automatically.)  
Press OPEN/CLOSE,  
OPEN/  
3 and then place a disc into the disc tray.  
POWER  
CLOSE  
Hold disc by its edges  
only (p. 4) with printed  
side up and use guides to  
1
2
place into tray.  
DVD  
Use  
3(8 cm)  
1
PLAY  
or  
5(12 cm) disc.  
2
REW/  
SLOW-  
FF/  
SLOW+  
Press PLAY to start playing.  
4 Disc tray closes automatically.  
STOP  
You may also close tray by  
PAUSE/  
STILL  
CLOSE  
pressing OPEN/CLOSE.  
Data reading time differs with  
each disc.  
NUMBER  
keys  
READING  
VSS  
RETURN  
SKIP  
<Example1>  
TITLE MENU  
SKIP  
If an interactive DVD*1 or  
a Video CD with playback  
control*2 is used and TITLE  
MENU appears, go to step 5.  
SELECT  
Dogs Castles  
Birds  
MENU  
10  
Lovers  
SET  
TITLE  
Press  
or  
5
NUMBER keys (see  
below) to select title,  
and press SET or  
Operation using DECK buttons  
3, 7 Press  
PLAY to start playing.  
• “Pressing SET or PLAY”  
is not necessary when  
using NUMBER keys.  
OPEN/CLOSE.  
1Press  
POWER.  
<Example2>  
4 Press PLAY.  
Using NUMBER keys starts playing automatically.  
The number of available titles varies with each disc.  
3Insert a disc.  
1 digit number  
2 digit number  
3 digit number  
1 ••• 1  
12 ••• 10 1 2  
123 •••100 1 2 3  
<Input  
Example>  
Press SKIP  
menu screen.  
| or |  
to go to next or previous  
SKIP function not available with all discs.  
Please refer to disc jacket for operation information.  
6 Press STOP.  
To return to menu (play stops)  
Press TITLE, MENU, or RETURN. (DVD-Video/  
DVD-Audio)  
*1 Interactive DVD...  
May include multiple camera angles,  
stories, etc.  
Press RETURN. (Video CD)  
*2 Video CD with playback control...  
Particular scenes or information can be  
interactively selected from a menu that  
appears on the screen.  
Press STOP to stop playing.  
6
7
Press OPEN/CLOSE to eject the disc.  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
*Important: If a remote control button does not work when pressed,  
press the DVD button on the remote and try the button again.  
I Forward/Reverse Scene Search  
V.S.S. (VirtualSurroundSound)  
Press FF/SLOW+ or REW/SLOW-  
Enjoy a surround-like effect if you are  
using two front speakers only. The effect  
is broadened and sound seems to come  
from virtual speakers on either side if the  
disc has surround signals recorded on it.  
during play.  
Press PLAY to release.  
Starting forward/reverse search during play  
started from menu on Video CDs may recall menu.  
Search speed, slow at first, increases with each  
additional press of the button up to 5 levels.  
Press VSS in DVD mode.  
The Surround sound effects can be  
changed by pressing VSS repeatedly as  
shown by the figure below.  
I Forward/Reverse Chapter/Track Skip  
Press SKIP  
| or |  
SKIP during play.  
VSS1  
Each press skips a chapter (DVD-Video) or  
track (DVD-Audio/Video CD/CD).  
VSS OFF  
VSS2  
VSS OFF (default)  
VSS3  
Pressing |  
SKIP once midway through a  
Note  
chapter/track returns to the start of that  
chapter/track. Each additional press skips  
back one chapter/track.  
Surround sound effects is available in DVD  
mode only.  
Turn off the surround effects on the other  
equipment.  
V.S.S. will not work, or will have less effect,  
with some discs.  
Turn V.S.S. off if it causes distortion.  
Sound will only come from the two front  
speakers if V.S.S. is on.  
Pressing SKIP  
| or |  
during play started  
from menu on Video CDs may recall menu.  
Current playback position  
Chapter/Track Chapter/Track Chapter/Track Chapter/Track  
Reverse Skip  
Forward Skip  
Resume Function  
IStill Picture or Pause  
Press PAUSE/STILL during play.  
DECK memorizes the point where STOP is  
pressed (STOP  
is displayed on screen).  
Press PLAY to resume play from this point.  
Pressing STOP again or opening the tray  
cancels RESUME, however, RESUME is not  
canceled when power is turned off and on.  
RESUME works only with discs for which  
elapsed play time is displayed during play.  
Press PLAY to release.  
DVD/Video CD : DECK will enter still picture mode.  
CD : DECK will enter pause mode.  
I Frame by Frame Picture  
(DVD/Video CD)  
Press PAUSE/STILL in still mode.  
Press PLAY to release.  
Each press advances picture one frame.  
Hold button down for consecutive frame advance.  
Whether pictures are advanced by FRAMEor  
FIELDis selected automatically. (See p. 53.)  
Enjoy Video CDs featuring  
playback control without using  
menus (Video CDs only)  
1. Do steps 1-4 (previous page).  
When menu appears, press STOP.  
2. Press NUMBER keys to select desired  
track (play begins).  
ISlow Motion Picture  
(DVD/Video CD)  
Press FF/SLOW+ or REW/SLOW-  
in still mode.  
Press PLAY to release.  
Slow motion speed, slow at first, is increased  
with each additional press of the button up to  
5 levels.  
Check disc for track numbers.  
Press 1to start at beginning of disc.  
To Resume Menu use,  
Press STOP and press PLAY, then the  
menu will be displayed.  
Now, go to step 5 (previous page).  
Notes  
Reverse slow motion is not available for Video CDs.  
Please read the disc jacket for operation  
information.  
Auto-Power Off Function  
Power turns off after DECK has been in  
Stop mode (DVD) for about 5 minutes.  
If a single sided disc is placed in upside  
down, THIS TYPE OF DISC CANNOT BE  
PLAYED. PLEASE INSERT A DIFFERENT  
DISCis displayed.  
Remove disc and press DECK POWER off  
when not in use.  
When  
appears on the screen while a button  
is being operated, it means that the  
corresponding operation is prohibited by DECK  
or the disc.  
Disc continues to rotate with menu displayed  
even after play is done.  
Press STOP to clear menu display when  
finished with menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
Timer Recording  
Ready Checklist  
All connections are made. (pp. 12 ~ 15)  
TV and DECK are plugged in.  
Clock set correctly. (p. 18)  
Tape has rec.tab. (p. 6)  
Remote is in VCR mode. (Press VCR.)  
Sufficient tape remaining for recording time.  
POWER  
VCR  
Press PROG*  
to display Program.  
1
1) To set record DATE,  
press to select:  
DATE  
START  
ST  
O
P
CH  
13 SUN  
T
--:-- --:-- --  
2
-O-D-A-Y-----------------S-L-P-  
1~31= one time, or  
DAILY= MON~ FRI, or  
WEEKLY= same time  
each week and  
SE  
L
EC  
T
START  
D
ATE  
ADD/DLT  
PROG  
SELE  
SET  
END  
C
T :  
:
:
SET  
PROG  
press SET.  
See selection order left.  
Example  
Today  
14  
SELECT  
31  
1
12  
2) To set remaining items,  
press  
DAILY  
WEEKLY  
(SUN)  
SELECT  
/
SET  
to select and  
13  
Selection Order  
press SET  
WEEKLY  
(MON)  
to set START/ STOP times,  
CH (channel) or LINE  
input (p. 35), and tape  
speed (SP, LP, SLP).  
WEEKLY  
(SAT)  
Press PROG  
to end programming.  
VCR mode Indicator  
VCR REC Indicator  
To Enter More Programs,  
press  
DT STA  
R
T
ST  
O
P
CH SPD  
13 10  
:
:
:
:
00  
P
12  
:
00  
P
0
2
SP  
3
-- --  
-- --  
-- --  
-- --  
-- --  
-- --  
:
:
:
-- -- --  
-- -- --  
-- -- --  
to select and  
press SET  
C
AN  
SELECT 1-8  
NTER  
EXIT  
C
EL  
:
:
ADD/DLT  
VCR  
TIMER REC  
to set an unused program  
number, and then repeat  
step 2.  
E
: SET  
PROG  
:
Hi - Fi  
TIMER Indicator  
Or  
<Multi Function Display>  
Press PROG  
to exit.  
The TimerIndicator lights up on DECK.  
You can do Timer Recording with the power on or off.  
• “TIMER REC WILL START SOONappears on-screen for 2 minutes  
before Timer Recording starts. If DECK is in DVD mode, no message  
appears, but the VCR REC Indicator, the VCR mode indicator and  
RECwill flash on Multi function Display.  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
*Important: If a remote control button does not work when pressed,  
press the VCR button on the remote and try the button again.  
Review, Replace or Clear Program Contents:  
(Recording is not in progress)  
Press PROG  
To cancel a Timer  
1
2
to display Program List.  
Recording in progress...  
Hold down STOP in VCR mode for  
a few seconds to cancel the Timer  
Recording.  
(The TIMERIndicator goes out  
on Multi Function Display.)  
DT STA  
R
T
A
P
P
P
ST  
O
P
A
P
CH SPD  
08 SP  
02 SP  
10 SP  
L1 LP  
Press  
7
8
9
10  
8
:
:
:
:
00  
12  
:
:
:
:
00  
00  
00  
12  
9
10  
00  
to select number and  
press SET  
10  
00  
P
P
S
U
9
00  
00  
C
AN  
C
EL  
:
ADD/DLT  
to display.  
SELECT 1-8 :  
ENTER : SET  
EXIT  
: PROG  
Any future daily or weekly recording  
will be performed as programmed.  
To Replace program...  
3
DATE  
S
TART  
S
TOP  
CH  
Repeat Step 2 (p. 24)  
to set new programs.  
7
SUN  
9
:00A 12  
:
00A 08  
SP  
T
A
Y
--O--D------------------------------------  
SELEC  
T
START  
DATE  
SELE  
SET  
CT :  
:
:
SET  
PROG  
BACK :  
END  
or  
To Clear program...  
DT STA  
R
T
ST  
O
P
CH SPD  
Press ADD/DLT.  
-- --  
:
:
:
:
-- -- -- -- --  
:
8
10  
8
9
00  
P
P
P
12  
:
:
:
00  
00  
00  
P
02 SP  
10 SP  
L1 LP  
10  
00  
9
P
P
SU  
00  
10  
CAN  
CEL  
:
ADD/DLT  
SELECT 1-8 :  
ENTER : SET  
EXIT  
: PROG  
Press PROG  
4
to end the programming.  
Notes  
If you are using a Cable Box, the VCRs channel for Timer Recording must be set to  
the Cable Box input channel and Cable Box must be manually set to the desired  
channel. Cable Box power must be left on.  
2 minutes before Timer Recording is performed, PLEASE PREPARE FOR TIMER  
RECappears and Timer Indicator flashes.  
Be sure a cassette with record tab is loaded and DECK is in Stop mode.  
If a power interruption occurs while programming the timer, the timer program(s) may be  
canceled. If TIMER PROGRAMS WERE LOST DUE TO POWER INTERRUPTION”  
appears on-screen, please re-enter the timer programs.  
If the start time for Timer Recording comes up during recording and playing back,  
Timer Recording will not be performed.  
Important notes when using DSS Receiver  
When recording programs via DSS Receiver, DSS Receiver must be left on.  
When recording programs via an antenna or cable, DSS Receiver must be turned off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
MTS Broadcast/ VHS Hi-Fi Stereo System  
Connection  
Make the Audio/Video Connection as shown on pp. 12 ~ 15.  
You can use TV connected to a Stereo amplifier and speakers instead of Stereo TV.  
Receivable Broadcast Types  
The following are possible audio broadcast types and on-  
screen displays.  
DISPLAY  
The signal being received is indicated with an “ ” mark  
while the selected audio mode is indicated with an arrow.  
To display the broadcast signal being received,  
press DISPLAY*.  
CH 02  
MTS Stereo and SAP broadcast  
STOP  
12:00  
12:00  
12:00  
A
A
A
M
M
M
0
0
0
0
:
:
:
:
00  
:
00  
SP  
STEREO  
SAP  
Multi-channel Television Sound  
Stereo (main language) and  
Secondary Audio Program (sub  
language) broadcasts are being  
received simultaneously.  
MONO  
Select STEREO or SAP audio mode.  
MTS Stereo broadcast  
CH 02  
STOP  
00  
:
00  
SP  
STEREO  
SAP  
Multi-channel Television Sound  
Stereo broadcast. Select STEREO  
audio mode.  
If stereo broadcast is weak and  
display flickers, select MONO audio  
mode for possible better results.  
MONO  
AUDIO  
(SAP/Hi-Fi)  
SAP broadcast  
CH 02  
STOP  
00  
:
00  
SP  
STEREO  
SAP  
Secondary Audio Program (sub  
language) broadcast. Select SAP  
audio mode for the sub language.  
MONO  
Equipped with  
®-TV  
Noise Reduction for  
true MTS reproduction.  
®-TV Noise  
Reduction is required  
for good stereo  
MONO broadcast  
CH 02  
STOP  
12:00AM  
00  
:
00  
SP  
separation and audio  
STEREO  
SAP  
Normal monaural sound broadcast.  
®
fidelity.  
is a  
MONO  
registered trademark,  
and is licensed by  
®
Technology Licensing.  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
*Important: If a remote control button does not work when pressed,  
press the VCR button on the remote and try the button again.  
Audio Mode for Recording  
Press AUDIO (SAP/Hi-Fi)  
to display audio mode.  
1
2
(Display disappears after 5 seconds.)  
Press AUDIO (SAP/Hi-Fi) repeatedly  
to select desired mode.  
STEREO  
SAP  
M
ONO  
Refer to Receivable Broadcast Typeson p. 26.  
Arrow indicates selection.  
Make a recording.  
See p. 21.  
3
Audio Mode for Playback  
Start playback.  
See p. 20.  
1
Press AUDIO (SAP/Hi-Fi)  
2
3
to display audio mode.  
Press AUDIO (SAP/Hi-Fi) repeatedly  
to select desired mode.  
H
H
H
IFI : L  
IFI : L  
/R  
IFI  
:
R
N
ORMAL  
Select HIFI (L/R)or HIFI (L)or HIFI (R)to listen to stereo  
recordings in stereo sound.  
Select NORMALfor monaural sound.  
Display disappears after 5 seconds.  
Arrow indicates  
selection.  
Notes  
Only tapes recorded in Hi-Fi stereo will playback with true stereo sound. Standard  
stereo tapes will playback in monaural sound.  
To listen to Hi-Fi stereo playback, the DECK AUDIO (L/R) jacks must be connected to  
a stereo TV or an external stereo amplifier and speakers. (See pp. 12, 14.)  
If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.  
Hi-Fi and normal audio playback volume level may differ.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
Multi-Brand Control Feature  
POWER  
Multi-Brand Control Setup  
The Remote Control can be set to control some TV and  
Cable Box/DSS functions.  
VCR  
DSS/  
CABLE  
Find your TV and Cable Box/DSS Receiver  
TV  
1
2
Brand Code Number on the following page.  
DVD  
Set up for TV control,  
hold down TV button,  
enter code with NUMBER keys.  
Set up for Cable or DSS control,  
hold down DSS/CABLE button,  
enter code with NUMBER keys.  
If code number is 100 or greater,  
e.g., press 1 - 0 - 2 for 102.  
NUMBER  
keys  
Confirm code entry,  
3
press POWER to turn selected unit on or off.  
ENTER  
See table below for controllable functions in each mode.  
Repeat setup after remote battery replacement.  
Notes  
Remote will not control every TV, Cable Box, or  
DSS made by the manufacturer listed. If you get  
no response, your particular unit cannot be  
controlled. There are NO additional codes for the  
products listed. If your product is not listed, then  
the remote is not compatible with that product.  
Using Multi-Brand Control  
After remote is set up, you can select VCR, DVD, TV, or  
DSS/CABLE for the desired function.  
Press VCR, DVD, TV, or DSS/CABLE on the remote.  
(Table below shows available remote buttons for each mode.)  
Unit  
DVD/VCR  
All  
TV  
CABLE/ DSS  
Mode  
DVD/VCR  
VOL  
+
/-  
POWER, INPUT,  
NUMBER keys,  
ENTER,  
EJECT/OPEN/CLOSE *,  
DISPLAY, PLAY, STOP,  
FF/SLOW+, REW/SLOW-,  
VCR/TV, PAUSE/STILL, SKIP,  
AUDIO, CM/ZERO,  
TV  
CH  
/
+
,
VOL  
/-  
POWER, ENTER,  
NUMBER keys  
(except 100key),  
TAPE POSITION,  
COUNTER RESET, SPEED,  
REC, PAGE  
CABLE/  
DSS  
VOL +/-  
CH  
/
* Bold: VCR Function  
Bold Italic: VCR and DVD Functions  
Normal: TV, Cable Box or DSS Receiver  
Italic: DVD Function  
Notes  
Not all functions listed may be controllable.  
In TV or DSS/CABLE mode, it may be necessary to press ENTER after pressing  
NUMBER keys for channel selection.  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
TV Brand Code Numbers  
Panasonic ....................... 01, 02  
Quasar ............................ 01, 02  
RCA ....................................... 03  
GE ......................................... 03  
Zenith .................................... 04  
Magnavox .............................. 05  
JVC ........................................ 11  
Hitachi ................................... 12  
Mitsubishi ........................ 07, 13  
Samsung ............................... 14  
Gold Star ................... 15, 16, 17  
Sylvania ................................ 05  
Sharp ............................... 06, 07  
Sony ...................................... 08  
Toshiba ................................. 09  
Sanyo .................................... 10  
Fisher .................................... 10  
Cable Box Brand Code Numbers  
Oak Sigma ..................................... 46, 11, 129, 101  
Panasonic .................................. 17, 16, 08, 87, 109  
Philips ................... 23, 24, 20, 13, 07, 50, 128, 129  
Pioneer ...................................................... 06, 05, 12  
Pulsar .................... 04, 42, 63, 44, 30, 52, 124, 126  
Quest ........................................................ 06, 05, 12  
Radio Shack ............................... 44, 51, 75, 59, 126  
RCA ............................................ 17, 16, 08, 87, 109  
Realistic ..................................... 44, 51, 75, 59, 126  
Recoton ...................................... 44, 51, 75, 59, 126  
Regal ................. 41, 14, 15, 28, 102, 104, 103, 130  
Regency .................................................. 28, 29, 130  
Rembrandt ....... 44, 42, 63, 29, 01, 32, 39, 120, 126  
Samsung ...................................... 42, 06, 32, 05, 40  
Scientific Atlanta ................... 08, 09, 25, 61, 53, 87  
Sheritech ............................................................... 27  
Signal ............................................................ 26, 112  
SL Marx ............. 42, 06, 32, 40, 43, 44, 52, 63, 126  
Sprucer ...................................... 17, 16, 08, 87, 109  
StandardComponents ............... 32, 39, 42, 44, 126  
Stargate ..............04, 42, 32, 40, 63, 44, 30, 52, 06  
124, 126  
Sylvania .......................................................... 19, 18  
Teknika ........................................................... 74, 35  
Telecaption .................................................... 77, 127  
Teleview ................................. 40, 19, 38, 32, 42, 06  
Texscan .......................................................... 19, 18  
Tocom ................................... 34, 33, 01, 42, 66, 120  
Toshiba ................................................................. 36  
Unika ........................... 44, 42, 63, 29, 01, 126, 120  
Universal ..............................52, 43, 44, 63, 42, 126  
Viewstar .................. 62, 40, 22, 13, 58, 20, 26, 107  
Videoway .......................................... 07, 23, 50, 129  
Vidtek .................................................................... 64  
Zenith ............................................... 07, 23, 50, 129  
Archer ......................... 44, 06, 01, 120, 05, 63, 126  
Cableview ................ 29, 09, 01, 63, 120, 44, 42, 30  
52, 04, 124, 126  
Citizen ................... 44, 52, 30, 63, 42, 04, 124, 126  
Curtis ..................................... 08, 09, 25, 61, 53, 87  
Century ...................................... 44, 51, 75, 59, 126  
Cabletenna .................. 29, 09, 01, 63, 120, 44, 126  
CableCinema .............. 29, 09, 01, 63, 120, 44, 126  
Diamond ...................... 29, 09, 01, 63, 120, 44, 126  
Eagle ....................... 62, 40, 22, 13, 58, 20, 26, 107  
Eastern ................................................... 28, 29, 130  
Explorer .................................. 08, 09, 25, 61, 53, 87  
Gemini ..................................................... 30, 04, 124  
General Electric ...................................... 01, 57, 120  
General Instruments . 01, 84, 83, 34, 03, 02, 04, 55  
65, 66, 67, 68, 120, 106, 121, 122, 115, 117, 118, 124  
Gerrard ............................................... 44, 51, 75, 59  
GC Electronics ............... 44, 42, 63, 29, 30, 52, 04  
124, 126  
Hamlin ............... 41, 14, 15, 28, 102, 104, 103, 130  
Hitachi ................................................................... 31  
Jerrold .......... 01, 84, 83, 34, 03, 02, 04, 55, 65, 66  
67, 68, 120, 106, 121, 122, 115, 117, 118, 124  
Jasco ...................................................... 30, 04, 124  
Macom ................................................................... 31  
Magnavox ...................................................... 26, 112  
Matsushita ................................. 17, 16, 08, 87, 109  
Movietime ...................... 32, 39, 42, 44, 126, 38, 40  
Maestro ........................................................... 74, 35  
NEC .................................................... 40, 19, 38, 32  
NSC .................................................... 40, 19, 38, 32  
Novavision ............................. 08, 09, 25, 61, 53, 87  
Next Level ........... 01, 84, 83, 34, 03, 02, 04, 55, 65  
66, 67, 68, 120, 106, 121, 122  
Oak................................................. 46, 11, 129, 101  
DSS Brand Code Numbers  
Optimus ................................................ 94, 95  
Panasonic ................................................... 96  
ProScan ...................................................... 97  
RCA............................................................. 97  
SONY .................................................. 98, 105  
Toshiba ....................................................... 90  
Hitachi/ Hughes.................................... 91, 99  
Primestar .................................................... 92  
Drake .......................................................... 93  
Magnavox ............................................. 94, 95  
Uniden................................................... 94, 95  
Important Notes  
Some manufacturers use several codes for one brand. If the first code entered fails, try the  
next one listed.  
Some TV, Cable Box and DSS Receiver brands require you to turn on the power manually.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
Tape Operation  
Search System  
For each recording, an invisible index mark is placed on the tape. A program index and  
information are also included for timer recordings. These marks are used to access or  
scan recordings.  
Program End Search  
Index Search  
Locates end point of recording for continuity.  
Press SEARCH*  
to display SEARCH  
in Stop or Play  
mode, and then  
press NUMBER  
keys  
to select recording  
number.  
To calculate  
number, see below.  
INDEX SEARCH  
1
ENTER INDEX NUMBER :1  
USING 9 KEYS  
Press SEARCH twice  
1
-
to display SEARCH in Stop or Play  
1
FORWARD SEARCH :FF  
REVERSE SEARCH :REW  
NEXT :SEARCH  
mode.  
EXIT :STOP  
Press FF/SLOW+  
PROGRAM END SEARCH  
on the remote to  
2
start PROGRAM  
END SEARCH.  
SEARCH START : FF  
Press FF/SLOW+  
or REW/SLOW- on  
the remote to start  
search.  
EXIT :SEARCH  
To cancel, press  
PLAY or STOP.  
Examples of Program End Search.  
Fig.1  
INDEX SEARCH  
Play begins at  
search end.  
To search forward  
or back 1 index,  
press FF/SLOW+ or  
REW/SLOW- on the  
remote while  
2
Program 1  
Program 2 or BLANK  
the current tape position  
Press SEARCH button  
FORWARD SEARCH : FF  
REVERSE SEARCH : REW  
EndPoint  
FF  
Fig.2  
screen left is  
displayed (10 sec.).  
Program 1  
BLANK  
BLANK  
Program  
2
the current tape position  
Press SEARCH button  
To cancel, press  
PLAY or STOP.  
FF  
End Point  
Fig.3  
To Calculate Index Number  
the current tape position  
Press SEARCH button  
Example 1:  
To go to rec. 2 from rec. 4, enter 3 and press REW.  
Program 1  
BLANK  
Program  
2
If search exceeds  
a few seconds in  
BLANK area.  
FF  
EndPoint  
1
2
3
4
5
6
7
Example 2:  
Uponlocatingendpoint,  
To go to rec. 6 from rec. 2, enter 4 and press FF.  
search continues 7 sec. past end point,  
tape rewinds to 10 sec. before end point,  
tape plays to end point and stops.  
1
2
3
4
5
6
7
NOTE: indicates start points of each recording.  
Note  
Note  
If Index Search is started very close to an  
index mark, that index mark may not be  
counted in the search.  
If Program End Search is started very close to  
an index mark, that mark may be skipped over.  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
*Important: If a remote control button does not work when pressed,  
press the VCR button on the remote and try the button again.  
Auto Operation Functions  
Auto Play  
Insert a tape Power comes on,  
Play starts if there is no record tab  
(see p. 6).  
Auto Rewind  
Play  
Fast Forward  
Tape end Rewind  
Play Auto Eject  
(Repeat Play must be off)  
Play Tape end Rewind  
Tape ejects if set some programs  
REW/SLOW-  
PLAY  
FF/SLOW+  
STOP  
NUMBER  
keys  
SEARCH  
Commercial Skip  
VCR fast forwards (skips) over 1~3 minutes  
of recorded tape.  
Press CM/ZERO in Play mode.  
CM/ZERO  
1
The skip time can be changed by  
pressing CM/ZERO repeatedly as  
shown by the figure below.  
PLAY  
1st Press  
2nd Press  
3rd Press  
1 min Skip  
2 min Skip  
3 min Skip  
No indication appears on-screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
Tape Operation (continued)  
Repeat Play  
VCR/TV Selector Feature  
Set to playback a recording over and over.  
The VCR/TV selection can be set to  
auto or manual.  
Press ACTION*  
to display MENU.  
1
2
Press ACTION  
to display MENU.  
1
2
MENU  
SET UP VCR  
SET CLOCK  
SET UP CHANNEL  
IDIOMA/LANGUE : ENGLISH  
VCRS OUTPUT CH:3  
Press  
to select SET UP VCR,and  
MENU  
Press  
to select  
SET UP  
VCR,and  
SET UP VCR  
SET CLOCK  
press SET.  
SET UP CHANNEL  
IDIOMA/LANGUE : ENGLISH  
SELECT :  
EXIT : ACTION  
SET : SET  
VCRS OUTPUT CH:3  
SELECT :  
SET : SET  
EXIT  
: ACTION  
press SET.  
Press  
SET UP  
REPEAT PLAY  
RE OTE ARN  
V
CR  
:
:
O
FF  
M
AUT  
W
SHU  
I
NG  
OFF  
O
N
to select REPEAT PLAY,”  
and press SET  
3
-
T
O
O
:
O
FF  
AUT  
VCR/TV  
:
OFF  
Press  
SET UP  
REPEAT PLAY  
RE OTE ARN  
SHU  
VCR/TV  
V
CR  
:
:
:
O
O
O
FF  
M
W
I
NG  
OFF  
N
to set ONor OFF.”  
3
to select  
-
T
AUT  
O
FF  
OFF  
SELE  
CT  
:
:
SET: SET  
AUTO  
:
END  
ACT  
I
ON  
AUTO VCR/  
TV,and  
press SET  
to set ON”  
or OFF.”  
Play repeats at tape end or if unrecorded portion  
over 30 sec. is detected.  
SELECT  
:
:
SET: SET  
END  
ACT  
I
ON  
Press ACTION twice  
to return to normal screen.  
4
OFF(Manual):You select VCRor  
TVmode using the  
VCR/TV button on the  
remote.  
Note  
For repeat play in DVD mode, see page 44.  
ON(Auto):  
VCRmode is  
automatically set when  
VCR is turned on, or in  
Play mode.  
Zero Search  
To quickly return to a specified tape location.  
Press DISPLAY during play  
Press ACTION  
to return to normal screen.  
1to display Counter.  
4
PLAY  
12:00AM  
Press COUNTER RESET  
at desired position to reset  
to 0:00:00.  
0
:
00  
:
00  
SP  
Note  
2
For more on VCR/TV selection, see  
Record one station, watch another”  
and Select channels at DECK”  
sections (see p. 21).  
Continue to record, playback etc.  
3
4
5
Press STOP.  
REW  
12:30  
A
M
M
CH 02  
Press CM/ZERO in Stop mode  
to start Zero Search.  
0
:
30  
:
30  
SP  
STOP  
12:31  
A
CH 02  
0
:
00  
:
00  
SP  
DECK will go into FF or REW mode and stop  
at the last point the Counter was set to 0:00:00.  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32  
*Important: If a remote control button does not work  
when pressed, press the VCR button  
Special VCR Features  
on the remote and try the button again.  
Weak Signal Display Feature  
When ON,picture is displayed regardless of signal  
strength.  
DISPLAY  
STOP  
Press ACTION  
1 to display MENU.  
MENU  
Press  
SET UP VCR  
SET CLOCK  
to select SET UP  
2
SET UP CHANNEL  
IDIOMA/LANGUE : ENGLISH  
VCRS OUTPUT CH:3  
CHANNEL,and  
press SET.  
SELECT :  
EXIT : ACTION  
SET : SET  
ACTION  
SELECT  
SET  
SET UP CH  
ANNEL  
Press  
ANTENN ABLE  
A
:
C
AUT  
O
K
SET  
3
to select WEAK SIGNAL  
DISPLAY,and  
press SET  
W
EA  
SIGNAL DISPLAY:OFF  
SELE  
EXIT  
CT  
:
:
SET: SET  
ACT  
I
ON  
to set ONor OFF.”  
CM/ZERO  
ON: Picture is displayed regardless of signal  
condition, and may not always be clearly visible.  
COUNTER  
RESET  
OFF: Screen turns solid blue when signal is weak or  
non-existent.  
Selecting ON has no effect on connected equipment  
VCR Lock Feature  
with blue back feature.  
When set to ON, all operations  
except for timer record and tape  
eject are prohibited. Useful for  
households with small children.  
Press ACTION twice  
to return to normal screen.  
4
To turn on, hold down REC on  
DECK in Stop mode with no  
tape inserted for 7 seconds.  
(Please ignore NO CASSETTE”  
warning.)  
Auto Shut-Off Feature  
The power shuts off at a preset time.  
Press ACTION  
1 to display MENU.  
MENU  
Press  
SET UP VCR  
SET CLOCK  
SET UP CHANNEL  
to select SET UP VCR,and  
2
V
CR  
LOCK  
ACTIVATED  
IDIOMA/LANGUE : ENGLISH  
VCRS OUTPUT CH:3  
press SET.  
SELECT :  
EXIT : ACTION  
SET : SET  
SET UP  
REPEAT PLAY  
RE OTE ARN  
SHU OFF  
VCR/TV  
V
CR  
Press  
To turn off, repeat above.  
:
:
:
:
O
FF  
N
FF  
FF  
M
W
I
NG  
O
to select AUTO SHUT-OFF.”  
Press SET repeatedly to  
change shutoff time as  
3
AUT  
O
O
T-  
O
O
AUT  
V
CR  
LOCK  
OFF  
SELECT  
:
:
SET SET  
:
EXIT  
ACT  
I
ON  
shown below.  
2 Hours  
4 Hours  
OFF  
VCR Lock cancels in 24 hours if  
clock is set.  
6 Hours  
Press ACTION twice  
4 to return to normal screen.  
Note  
The shut-off countdown will not function during Play or  
Record.  
REC  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
Special VCR Features (continued)  
*Important: If a remote control button does not work  
Remote Warning Feature  
If Multi-brand feature is used (p. 28), and this feature is  
set to on, a warning appears whenever an invalid key  
is pressed in TV, DSS or CABLE mode.  
when pressed, press the VCR button  
on the remote and try the button again.  
Press ACTION*  
INPUT  
STOP  
to display MENU.  
1
2
MENU  
SET UP VCR  
SET CLOCK  
SET UP CHANNEL  
IDIOMA/LANGUE : ENGLISH  
VCRS OUTPUT CH:3  
Press  
to select SET UP VCR,”  
and  
PAUSE/  
STILL  
press SET.  
SELECT :  
EXIT : ACTION  
SET : SET  
ACTION  
SELECT  
Press  
SET UP  
VCR  
REPEAT PLAY  
RE OTE ARN  
SHU OFF  
VCR/TV  
:
:
:
O
O
O
FF  
to select  
3
M
W
I
NG  
N
AUT  
AUT  
O
O
T-  
FF  
OFF  
REMOTE WARNING,and  
press SET  
to set ONor OFF.”  
:
SELE  
EXIT  
CT  
:
:
SET: SET  
ACT  
I
ON  
SET  
If OFF,remote warning will not appear  
when invalid key is pressed.  
TAPE  
POSITION  
Press ACTION twice  
to return to normal screen.  
4
REC  
Tape Position and Tape Status Feature  
To find out the present tape position and amount of tape remaining.  
Tape position is displayed for VHS-C type Cassettes, tapes  
under 30 minute long, and some other tapes, but the  
position is not correct.  
Press TAPE POSITION  
to detect current tape position.  
1
• “DETECTING TAPE POSITIONis displayed  
DETECTING TAPE POSITION  
only when a cassette is first inserted, and it  
takes several seconds for correct tape  
position to appear.  
The present tape position indication and  
amount of tape remaining (according to  
tape speed) is displayed.  
SP  
R 120 MI N.  
Tape remaining time display may not be  
precise.  
BEG  
IN  
END  
Press TAPE POSITION  
to return to normal screen.  
2
Note  
This function cannot display exact amount of tape remaining for  
tapes 30 minutes or less, or for tapes over 120 minutes in length.  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34  
CopyingYour Tapes (Dubbing)  
Connection  
VCR/ Camcorder (Hi-Fi)  
TV  
DVD/VCR DECK  
Front of DECK  
IN FROM ANT.  
VIDEO IN 2  
L-AUDIO IN2-R  
IN1  
OUT  
OUT  
VIDEO  
L
AUDIO  
R
VIDEO  
VHF/  
UHF  
VHF/UHF  
OUTTOTV  
L
R
(Audio/Video In Terminals  
on the front of DECK are  
available)  
AUDIO  
1
Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on DECK.  
To monitor the dubbing, also connect TV as shown.  
1
2
Connect Land RAUDIO OUT terminals on Playing VCR to Land R”  
AUDIO IN terminals on DECK.  
In place of Playing VCR, you can use other equipment, such as a Camcorder.  
Simply connect the units Audio/Video outputs to DECK.  
Playing (Source) VCR  
Recording (Editing) DECK  
Insert a pre-recorded tape.  
Insert a blank tape with record tab.  
1
2
Press INPUT to set DECK Input mode to  
LINE for Video Input.  
(See Selecting the Input Modebelow.)  
Press REC, then PAUSE/STILL  
immediately to enter REC/PAUSE  
mode.  
Press PLAY, then PAUSE/STILL  
immediately to enter PLAY/PAUSE  
mode.  
3
The operation of steps 4 and 5 must be done on the  
playing and recording VCRs at the same time.  
Press PLAY to start dubbing.  
Press PAUSE/STILL to start dubbing.  
Playing VCR starts playback.  
DECK starts recording.  
4
5
Press STOP to stop dubbing.  
Press STOP to stop dubbing.  
Selecting the Input Mode  
To Monitor Dubbing on TV  
1 Turn TV on and tune to the Recording  
Method 1: Press INPUT repeatedly.  
VCR channel (CH 3 or CH 4).  
Channel Number LINE1 LINE2  
Method 2: Press CH  
/
.
2 If Auto VCR/TV (see p. 32) is set to  
OFF,press VCR/TV on the remote to  
be VCR mode.  
Display will change as below.  
1
2
3
Press  
Press  
(CABLE)  
or  
125  
(TV)  
69  
LINE2  
LINE1  
• “L1or L2lights up on Multi Function Display  
(about 4 seconds) when LINE1 or LINE2 is selected.  
Dubbing tapes protected with Copy  
Guard will result in poor quality  
Note  
LINE1: For rear audio/video connection.  
recordings.  
LINE2: For front audio/video connection.  
Caution:Unauthorized exchanging and/or copying of copyrighted recordings may be  
copyright infringement.  
Please note that some tapes cannot be dubbed on DECK. Also, it is not  
possible to dub DVD/ Video CD/ CD to VHS tapes using DECK.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
Disc Operation  
Subtitle Language (DVD-Video only)  
You can select a different subtitle language (if offered) than  
the one set at the Settings for DVD Operation.  
(See p. 49.)  
Ready Checklist  
Please read Basic DVD Operation”  
on page 22.  
[Subtitle language]  
[Audio sound track language]  
Press SUB TITLE*  
1
in Play mode to display  
ENG  
FRA  
DEU  
ITA  
English  
French  
the subtitle selection  
on-screen.  
Display disappears after  
5 seconds.  
When no subtitles are offered,  
-will be displayed instead of  
the language number.  
German  
Italian  
ESP  
NLD  
SVE  
NOR  
DAN  
POR  
RUS  
JPN  
Spanish  
Dutch  
Swedish  
Norwegian  
Danish  
Press  
2
to select a language.  
Press  
to select ONor OFF.”  
Portuguese  
Russian  
Japanese  
Te amo  
Subtitle language being played back (see chart, right).  
CHI  
Chinese  
Korean  
Malay  
Notes  
KOR  
MAL  
VIE  
If after several presses of the button the language does not  
change, language selection is not offered on the disc.  
When disc is removed, subtitles revert to initial setting  
language. If the initial language is not recorded on the disc,  
the discs priority language will appear.  
Vietnamese  
Thai  
THA  
Other  
Audio Soundtrack Language (DVD only)  
Change the No. by pressing  
,
and press SET.  
You can change the audio soundtrack language, selected  
at the Settings for DVD Operation, to a different language  
if available. (See p. 49.)  
(This operation works only with discs on which multiple  
audio soundtrack languages are recorded.)  
[Audio attribute 1 type, sampling  
frequency, bit No. of the disc (see  
p. 50.)]  
Press AUDIO  
AUDIO: 1 ENG  
Dolby Digital 3/2.1ch  
in Play mode to display the  
1
16 bit  
20 bit  
24 bit  
44.1 kHz  
Hello  
LPCM  
Linear PCM disc  
audio selection on-screen.  
192 kHz  
Display disappears after  
5 seconds.  
Dolby Digital 1 ch - 5.1 ch  
Dolby Digital disc  
DTS disc  
SELECT  
END  
:
DTS  
1 ch - 5.1 ch  
Audio attribute 1 type, sampling  
frequency, bit No. of the disc or  
number of speaker channel.  
:AUDIO  
Notes  
If, after several presses of the  
AUDIO button the language does not  
change, language selection is not  
offered on the disc.  
When disc is removed, language  
reverts to initial setting. If this  
AUDIO: 3 ESP  
Dolby Digital 3/2.1ch  
Press  
to select desired language.  
2
Hola  
SELECT  
END  
:
:AUDIO  
language is not recorded on the disc,  
the language recorded will be heard.  
Audio soundtrack language being played back (see chart,  
above right).  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36  
Important: if a remote control button does not work when pressed,  
press the DVD button on the remote and try the button again.  
*
When  
appears on the screen while  
Multiple Angle Viewing (DVD only)  
a button is being operated, it means  
that the corresponding operation is  
prohibited by DECK or the disc.  
DVDs may contain scenes shot from multiple camera  
angles allowing the same scene to be viewed at different  
angles. You can view these angles, if available, using the  
ANGLE button.  
Press ANGLE  
in Play mode to display the  
1
angle selection on-screen.  
Display disappears after  
5 seconds.  
ANGLE Indicator  
SELECT  
:
Notes  
The ANGLE Indicator lights up on  
DECK when a scene recorded at  
different angles is detected.  
The angle number can be set  
beforehand so that the angle is  
switched whenever the ANGLE  
Indicator lights up.  
Press  
to select the desired  
angle.  
2
SELECT  
:
Number of angle being played back.  
Vocal Selection for Karaoke Discs (DVD/Video CD)  
Press AUDIO in Play mode  
1 to display the audio screen.  
Press  
(or  
)
to select as shown below,  
and  
2
press (or ) to set.  
(DVD only)  
SELECT  
END  
:
:AUDIO  
DVD Karaoke (1 vocal) VOCAL ON VOCAL OFF  
DVD Karaoke (2 vocals) VOCAL V1 VOCAL V2 VOCAL V1+V2 VOCAL OFF  
SET  
Video CD  
LR  
L
R
SELECT  
SUB TITLE  
ZOOM  
Picture Zoom (DVD-Video only)  
You can enlarge specific portions of a picture and  
select the zoom ratio using the ZOOM button during  
DVD playback.  
ANGLE  
AUDIO  
Press ZOOM repeatedly to change display  
as follows.  
Notes  
You can enlarge the center portion of the image  
to one of 2 magnifications.  
The subtitle cannot be enlarged nor  
can its position be changed.  
The picture zoom feature does not  
work with a Video CD.  
During picture zoom, ZOOM1or  
ZOOM2appears on-screen for 5  
seconds.  
Zooming, on some discs, may result  
in poor picture quality, or may not  
operate at all.  
I Use the  
,
,
and  
buttons to move the position  
up, down, left and right.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
37  
Disc Operation (continued)  
Title Menu (DVD only)  
Some DVDs have more than one title, e.g. movies.  
If the disc offers a title menu, you can select the desired  
title number. (Operation may vary according to the disc.)  
Press TITLE*  
TITLE MENU  
in Play mode  
1
Dogs Castles  
Birds  
to display the title screen.  
Lovers  
<Example>  
Press  
or  
TITLE MENU  
2
NUMBER keys  
Dogs Castles  
to select a title, and  
press SET or PLAY  
to start playing.  
Birds  
Lovers  
PLAY  
STOP  
• “Pressing SET or PLAYis  
not necessary when using  
NUMBER keys.  
Birds  
of the world  
NUMBER  
keys  
<Example>  
CLEAR  
ACTION  
SELECT  
DVD Menu (DVD only)  
DVDs may offer a special menu. This menu may include  
guides to unique contents, audio/subtitle languages, etc.  
Although contents and operation may vary, the following  
steps show basic steps for using the menu.  
MENU  
SET  
Press MENU  
in Play mode to display  
DVD MENU.  
DVD MENU  
1
1 . SUBTITLE  
2 . AUDIO  
TITLE  
3 . ANGLE  
<Example>  
Press  
or  
DVD MENU  
1 . SUBTITLE  
2 . AUDIO  
2
NUMBER keys  
to select an item, and  
press SET or PLAY  
to perform.  
3 . ANGLE  
• “Pressing SET or PLAYis  
not necessary when using  
NUMBER keys.  
<Example>  
Repeat step 2 if there is  
more than one menu.  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38  
Important: if a remote control button does not work when pressed,  
press the DVD button on the remote and try the button again.  
*
Program Play (Video CD/CD only)  
You can program specific tracks and order of play.  
Press ACTION  
Ready Checklist  
DECK is in DVD mode, press DVD.  
Video CD or CD is inserted.  
Program Repeat Play  
(Video CD/CD only)  
1
to display DVD MAIN MENU.  
DVD MAIN MENU  
Press  
DISC LANGUAGES  
Do operation steps 1 through 5  
2
to select  
AUDIO OUTPUT  
ST I LL MODE  
TV MODE  
P A R E N T A L L O C K  
PLAY MODE  
: AUTO  
1 at left on this page.  
: 4 : 3 L e t t e r b o x  
PLAY MODE,and  
press SET  
to display.  
:
L E V E L  
8
Press DISPLAY to display Disc  
SELECT  
SET  
:
Information screen.  
2
: SET  
END  
: ACTION  
(Disc Information Screen)  
TRACK  
PBC  
:
1
VIDEO CD  
01 : 35 : 12  
: OFF  
PLAY MODE  
Press  
to select  
PROGRAM PLAY  
RANDOM PLAY  
3
4
PROGRAM PLAY,”  
and  
SELECT  
SET  
:
press SET to display.  
SET  
: SET  
NEXT : DISPLAY  
: SET  
END  
: ACTION  
Press DISPLAY to display  
DECK Information screen.  
PROGRAM PLAY  
3
4
Press  
DISC  
PROGRAM  
1
2
3
4
5
6
7
8
9
11 16  
12 17  
13 18  
14 19  
5
15  
1
8
6
to select a track  
number (Track  
numbers on disc are  
displayed.), and  
press SET.  
13  
2
Press SET to enter Select mode.  
Cursor move to OFF.”  
3
2
10 15 20  
CLEAR LAST  
CLEAR ALL  
SELECT  
SET  
END  
(DECK Information Screen)  
START  
:
: SET  
: ACTION  
Repeat step 4 to select another track.  
The selected track is added on the right side.  
PROGRAM PLAY  
Press  
SET  
: SET  
END : DISPLAY  
DISC  
PROGRAM  
1
2
3
4
5
6
7
8
9
11 16  
5
15  
1
8
6
5
to select START,and  
press SET to start play  
of programs in the  
12 17  
13 18  
14 19  
13  
2
3
2
Press  
to select DISC.”  
10 15 20  
5
6
(DECK Information Screen)  
CLEAR LAST  
CLEAR ALL  
START  
SELECT  
SET  
:
sequence selected.  
PLAY  
REPEAT : DISC  
PROGRAM PLAY  
: SET  
END  
: ACTION  
To cancel, press STOP  
during play, then press  
CLEAR.  
SELECT:  
SET  
: SET  
END : DISPLAY  
Notes  
Press SET to set mode.  
Up to 15 tracks can be programmed.  
• “ or “ ” (depending on disc) indicates additional  
PROGRAM PLAY screen.  
Cursor move to REPEAT.”  
To cancel, select REPEAT :  
OFFin step 5, then press SET.  
Press  
To clear the last program one by one  
Press to move to CLEAR LASTand  
for next or previous screen.  
press SET. (Pressing CLEAR on remote control  
also clears last program.)  
To clear all programs  
Press  
to move to CLEAR ALLand press  
SET. (Programs are also cleared when the power  
is turned off or the disc is removed.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
39  
Disc Operation (continued)  
Random Play (Video CD/CD only)  
Ready Checklist  
DECK is in DVD mode, press DVD.  
Tracks are played in a random order.  
Press ACTION*  
1
to display DVD MAIN MENU.  
DVD MAIN MENU  
Press  
DISC LANGUAGES  
to select PLAY MODE,”  
2
AUDIO OUTPUT  
DISPLAY  
STOP  
ST I LL MODE  
TV MODE  
: AUTO  
: 4 : 3 L e t t e r b o x  
and  
press SET  
to display.  
P A R E N T A L L O C K  
PLAY MODE  
:
L E V E L  
8
SELECT  
:
SET  
: SET  
END  
: ACTION  
PLAY MODE  
Press  
to select  
NUMBER  
keys  
PROGRAM PLAY  
RANDOM PLAY  
3
RANDOM PLAY,and  
press SET  
CLEAR  
SELECT  
SET  
END  
:
to begin random play.  
: SET  
: ACTION  
ACTION  
SELECT  
To cancel, press STOP  
during play, then press  
CLEAR.  
SET  
VOLUME  
ADJUST  
PAGE  
Setting the VOLUME ADJUST  
Some DVDs are recorded in lower than average volume levels.  
For these DVDs, this DECK can be set so that the average  
volume is increased.  
Press VOL.ADJ repeatedly to change ONOFF.”  
• “ONor OFFlights up on Multi Function Display (about 3 seconds) when  
press VOL.ADJ.  
VOLUME ADJUST OFF”  
VOLUME ADJUST ON”  
Some DVD  
[Volume level is low]  
Volume level is increased  
when played back.  
Volume is the original level.  
• “ONis set ..... When a DVD is played back, the average volume is increased.  
• “OFFis set .... The volume level recorded on the disc is played back just as it is.  
Notes  
This feature is available only for Dolby Digital sound tracks.  
When audio equipment is connected, setting the Sound Output level to OFFis recommended.  
If the sound becomes abnormal while playing a disc, set the Sound Output level to OFF.”  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
40  
Important: if a remote control button does not work when pressed,  
press the DVD button on the remote and try the button again.  
*
DVD-Audio Operation  
This DECK, equipped with a 192 kHz/ 24 bit Audio D/A converter, supports DVD-Audio  
recorded with high quality sound.  
The DVD-Audio feature includes Still Image Skipand Bonus Group Playback”  
functions. (See below.)  
Please refer to Basic DVD Operationon pages 22 and 23.  
Still Image Skip  
DVD-Audio still images (only if contained) can be skipped over.  
PAGE :  
1
Press PAGE  
in Play or Pause mode to display the still image and page  
number.  
Each press of PAGE changes page number as shown below.  
Pressing PAGE on the last page returns to PAGE 1.  
PAGE :  
2
SE
Press PAGE  
Press PAGE  
Press PAGE  
Press PAGE  
PAGE  
:
1
PAGE  
:
2
PAGE  
:
3
.......  
PAGE  
:
XX  
SELECT  
:
Still Image Skip function not available with all discs.  
Note  
Bonus Group playback  
Some DVD-Audio discs contain bonus groups. To enjoy these groups you may have to  
enter a password. Refer to the disc's jacket.  
Press DISPLAY in stop mode to display On-Screen Displays.”  
1
During playback, Bonus Group tracks cannot be selected.  
Note  
GROUP  
TRACK  
:
:
2
1
DVD-AUDIO  
00 : 12 : 34  
Press  
Press  
to select GROUP,and press SET.  
or NUMBER keys to select bonus group  
2
number, and press SET (see pp. 42, 43.)  
SELECT:  
SET  
: SET  
NEXT : DISPLAY  
If the proper secret code is already entered, Bonus Group tracks can be  
selected. (Secret code enter screen is skipped.)  
Notes  
This code is specifically for the disc and differs from Parental Lock secret code  
(p. 48). Please refer to disc jacket instructions.  
Press NUMBER keys  
BONUS GROUP  
4----I  
3
to enter bonus group secret code, and press SET.  
ENTER  
-
D
I
G
T
CODE  
To Make Corrections  
Press repeatedly to move the cursor.  
Press NUMBER keys to make the correction.  
When the proper secret code has been entered, Bonus Group track 1 playback  
begins. If a mistake is made, the secret code enter screen is redisplayed.  
Note  
Press CLEAR to return to normal screen.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
41  
DVD Operation using On-Screen Displays  
When DISPLAY is pressed, On-Screen Displays show  
Ready Checklist  
DECK is in DVD mode, press DVD.  
disc information (title/chapter/track number, elapsed  
playing time) and DECK information (repeat play, play  
mode).  
Press DISPLAY* in Play or Stop mode  
1
to display On-Screen Displays.”  
Each press of DISPLAY changes the on-screen  
display as follows. (Refer to pp. 43, 44.)  
Selected disc information  
Note  
DISPLAY button  
does not function  
while DVD TITLE  
MENU is displayed.  
Selected DECK information  
Normal Screen  
DISPLAY  
Press  
to select an item, and  
press SET.  
(or  
)
2
3
NUMBER  
keys  
Press  
or NUMBER keys  
CLEAR  
to select the setting, and  
press SET.  
<Example of DVD-Video>  
SELECT  
When numbers are  
displayed (e.g. title  
number), NUMBER keys  
are also available.  
SET  
If the number entered is  
not on the disc, the entry  
will have no effect.  
Re-enter the correct  
number.  
For more details, refer to  
the disc operation  
information.  
<Example of DVD-Audio>  
To return to normal  
screen,  
press CLEAR or  
DISPLAY repeatedly.  
Notes  
When DISPLAY button is pressed  
during playback of a Video CD with  
Playback control, NUMBER keys are  
not available on the displayed screen.  
In this case, press DISPLAY again to  
remove the displayed screen.  
<Example of Video CD>  
When  
appears on the screen while  
a button is being operated, it means  
that the corresponding operation is  
prohibited by DECK or the disc.  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
42  
Important: if a remote control button does not work when pressed,  
press the DVD button on the remote and try the button again.  
*
Detailed Descriptions of each On-Screen Display  
I Disc information screen (for DVD-Video)  
1
3
4
T I TLE  
:
1
DVD  
01 : 12 : 55  
CHAPTER : 12  
1. TITLE No.  
2
Select TITLE, and press SET.  
Change the No. by pressing  
or NUMBER keys, and press SET.  
2. CHAPTER No.  
SELECT:  
Select CHAPTER, and press SET.  
SET  
: SET  
NEXT : DISPLAY  
Change the No. by pressing  
or NUMBER keys, and press SET.  
3. Disc currently being played  
T I TLE  
:
1
DVD  
01 : -- : --  
CHAPTER : 12  
4. Elapsed playing time  
The screen may be changed by selecting the elapsed time.  
Select the elapsed playing time (xx:xx:xx), and press SET.  
Change the elapsed time by pressing NUMBER keys.  
Hours Minutes Seconds are entered in order.  
If the time entered is not on the disc, the entry will have no effect.  
Re-enter the correct time.  
ENTER : 0  
-
9
SET : SET  
NEXT : DISPLAY  
If SET is pressed while  
making entries, unit returns  
to the condition it was in  
before entries were made.  
e.g., press 0 - 1 - 2 - 3 - 4 - 5 for 01 : 23 : 45.  
Hour Minutes Seconds  
This function does not work with some discs.  
I Disc information screen (for DVD-Audio)  
C
D
A
B
A.GROUP No.  
Select GROUP, and press SET.  
Change the No. by pressing  
or NUMBER keys, and press SET.  
B.TRACK No.  
Select TRACK, and press SET.  
Change the No. by pressing  
C.Disc currently being played  
or NUMBER keys, and press SET.  
GROUP  
TRACK  
:
:
1
1
DVD-AUDIO  
01 : --  
:
--  
D.Elapsed playing time  
The screen may be changed by selecting the elapsed time.  
Select the elapsed playing time (xx:xx:xx), and press SET.  
Change the elapsed time by pressing NUMBER keys.  
Hours Minutes Seconds are entered in order.  
If the time entered is not on the disc, the entry will have no effect.  
Re-enter the correct time.  
ENTER : 0  
-
9
SET : SET  
NEXT : DISPLAY  
If SET is pressed  
while making entries,  
unit returns to the  
condition it was in  
before entries were  
made.  
e.g., press 0 - 1 - 2 - 3 - 4 - 5 for 01 : 23 : 45.  
Hour Minutes Seconds  
This function does not work with some discs.  
I Disc information screen (for Video CD/ CD)  
a. TRACK No.  
Select TRACK, and press SET.  
Change the No. by pressing  
or NUMBER keys, and press SET.  
c
d
a
b
TRACK  
PBC  
:
1
VIDEO CD  
01 : 35 : 12  
b. Playback control ON/OFF  
: OFF  
[Video CD with playback control only]  
ON Video CD menu play is displayed.  
OFF Video CD menu play is not displayed.  
c. Disc currently being played  
Video CD CD  
SET  
: SET  
NEXT : DISPLAY  
d. Elapsed playing time  
Track No. and the elapsed playing time are not displayed during play started from  
Notes  
menu of Video CDs with playback control.  
When  
appears on the screen while a button is being operated, it means that the  
corresponding operation is prohibited by DECK or the disc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
43  
DVD Operation using On-Screen Displays (continued)  
I DECK information screen (for DECK)  
1. Repeat Play  
Select REPEAT, and press SET*.  
Change the desired mode during play by pressing  
, and press SET.  
DVD-Video  
DVD-Audio  
Video CD/CD TRACK  
CHAPTER TITLE  
TRACK GROUP OFF  
DISC OFF  
OFF  
PLAY  
2. Play mode [Video CD/ CD only] (See p. 39 or 40.)  
REPEAT : CHAPTER  
1
2
PROGRAM PLAY program play  
RANDOM PLAY  
----  
random play  
normal play  
SELECT:  
SET  
: SET  
END : DISPLAY  
For your reference  
PLAY  
REPEAT : DISC  
RANDOM PLAY  
CHAPTER/TITLE REPEAT PLAY (DVD-Video)  
CURRENT PLAYBACK POSITION  
SET  
: SET  
END : DISPLAY  
TITLE  
chapter chapter  
chapter  
CHAPTER REPEAT  
TITLE REPEAT  
NORMAL PLAY  
OPEN/  
CLOSE  
TRACK/GROUP REPEAT PLAY (DVD-Audio)  
POWER  
PLAY  
CURRENT PLAYBACK POSITION  
GROUP  
track  
GROUP  
track  
track  
track  
track  
track  
FF/REW  
PAUSE  
STOP  
TRACK REPEAT  
GROUP REPEAT  
NORMAL PLAY  
NUMBER  
keys  
SKIP  
TRACK/DISC REPEAT PLAY (Video CD/CD)  
CURRENT PLAYBACK POSITION  
SKIP  
SELECT  
track  
track  
track  
TRACK REPEAT  
DISC REPEAT  
NORMAL PLAY  
SET  
ACTION  
For repeat play in VCR mode, see p. 32.  
Note  
Important: if a remote control button does not work when pressed,  
*
press the DVD button on the remote and try the button again.  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
44  
MP3/WMA/JPEG Playback Operation  
This unit can play MP3/WMA/JPEG format CD-R or  
MP3/WMA Playback  
CD-RW recorded for personal use on a PC, etc.  
Some discs may not play due to the condition of the  
Do steps 1~3 on left.  
recording.  
Press  
to select an MP3/WMA file ( / ).  
Press POWER on the remote or DECK.  
a
b
(During STOP mode)  
1
2
Press OPEN/CLOSE,  
then place an MP3/WMA/JPEG disc into  
the disc tray.  
Press OPEN/CLOSE to close.  
MP3/WMA/JPEG menu is displayed.  
Playback starts automatically  
(except JPEG files).  
Press SET or PLAY to start playback.  
I Forward/Reverse Search  
Press FF/SLOW+ or REW/SLOW- during play.  
Press PLAY to release.  
Search speed, slow at first, increases with each  
additional press of the button up to 5 levels.  
3
I Forward/Reverse Track Skip  
CD directory is displayed.  
<Example>  
Press SKIP  
| or |  
SKIP during play.  
Function  
Each press skips a track.  
PLAY  
00  
:
00  
:
00  
Counter  
Parent  
folder  
Status  
If pressed within first 3 seconds of playback,  
skips to the previous track. If over 3 seconds,  
ROOT  
. .  
VA  
END  
DD CUB I C  
CTURNE  
RN  
_WALTZ  
TECHNO  
POPS  
_
Folder area  
(Current folder  
appears green.)  
returns to top of track. (|  
SKIP only.)  
N
O
JAZZ  
NO  
Put DECK in Stop mode before performing  
File area  
(Selected file/  
folder is  
folder/file selection (see step 4.)  
PLAY MODE : NORMAL  
I Pause  
highlighted.  
Titles are  
displayed  
up to 11  
characters.)  
Press PAUSE during play.  
PLAY MODE  
:WMA file  
Press PLAY to release.  
:MP3 file  
:Folder  
Press STOP to stop play.  
c
d
:Parent folder  
Press OPEN/CLOSE to eject the disc.  
The MP3/WMA/JPEG MENU is closed  
automatically.  
:JPEG file  
<Example>  
(Diagram left shows CD directory  
structure as displayed in example  
OSD above.)  
ROOT  
Copyright protected files and files  
Note  
containing errors cannot be played  
back. The DECK skips to the next file.  
VA  
END  
DD_CUB I C  
CTURNE  
RN  
_WALTZ  
Notes  
N
NO  
O
Only File (not Folder) area  
operation is possible.  
Files are displayed in the  
following order:  
TECHNO  
POPS  
I Select PLAY MODE [MP3/WMA Playback]  
(During STOP mode)  
1) Press  
to move cursor to  
(!...0,1....9,A,B......Z).  
J
AZZ  
PLAY MODE.  
2) Press  
to select the desired PLAY  
Select file (During STOP mode)  
1)Press to select an MP3/WMA file (  
MP3/WMA Playback (see right)  
2)Press to select a JPEG file ( ).  
JPEG Playback (see p. 46)  
3)Press SKIP | (next) or |  
MODE (see below).  
/
).  
4
[PLAY MODE]  
NORMAL:  
All MP3/WMA files are selected and  
played back one time only.  
SINGLE REPEAT:  
The selected MP3/WMA file is played  
back repeatedly.  
SKIP  
(previous) to skip a file/folder page (7files)  
in the File area.  
Select folder (During STOP mode)  
FOLDER REPEAT:  
1)Press  
to select a folder ( ).  
The MP3/WMA files contained in the  
selected folder are played back  
repeatedly. However, folders below the  
selected folder are not played back.  
2)Press SET to display files/folders contained  
in the folder.  
Select parent folder (During STOP mode)  
1)Press  
to select a folder ( ).  
DISC REPEAT:  
All MP3/WMA files are played back  
repeatedly.  
2)Press SET to make changes to the previous  
directory display.  
Press ACTION to return the DVD MAIN  
5 MENU. (Press ACTION again to return  
Download from Www.Somanuals.com. All Manuals Search And Download.  
45  
to the MP3/WMA/JPEG MENU.)  
MP3/WMA/JPEGPlaybackOperation(continued)  
I Select PLAY MODE [JPEG Slide-show]  
JPEG Playback  
(During STOP mode) (See p. 45)  
1) Press  
to move cursor to  
You can play back JPEG images.  
PLAY MODE.  
Displayable Image Size: 32x32~7680x7680 pixels  
2) Press  
MODE (see below).  
to select the desired PLAY  
Some JPEG format may not be played  
back.  
Note  
[PLAY MODE]  
NORMAL:  
Do steps 1~3 on page 45.  
All JPEG files are selected and  
played back one time only.  
SINGLE REPEAT:  
The selected JPEG file is played back  
repeatedly.  
FOLDER REPEAT:  
The JPEG files contained in the  
selected folder are played back  
repeatedly. However, folders below the  
selected folder are not played back.  
Press  
to select an JPEG file ( ).  
1
2
Press SET or PLAY.  
Selected JPEG file is displayed.  
[JPEG Playback Screen]  
DISC REPEAT:  
All JPEG files are played back  
repeatedly.  
<Example>  
I Returned on the MP3/WMA/JPEG MENU  
Press STOP. (See p. 45)  
I Next/Previous Search  
Press SKIP  
| or |  
SKIP.  
I Start Slide-show Press FF/SLOW+ or  
REW/SLOW-. (below)  
I Enlarging an image Press ZOOM. (P. 47)  
I Rotating an image Press ANGLE. (P. 47)  
Press STOP to return the MP3/WMA/  
JPEG MENU.  
3
JPEG Slide-show  
(During JPEG Playback.)  
<Example>  
Operation can be done when files are in  
order, such as in the diagram below.  
JPEG files are displayed automatically  
(about every 3 seconds) as a slide-show.  
Press FF/SLOW+ or REW/SLOW-.  
ROOT  
1
<Example>  
REW/SLOW-  
01 PIC  
FF/SLOW+  
Image changes every 3 seconds.  
AAA  
DDD  
TTT  
UUU  
VVV  
WWW  
I Cancel slide show  
Press STOP to return the MP3/WMA/  
JPEG MENU. (See p. 45)  
I Still picture  
Press STILL (only SLIDE).  
Press PLAY to release.  
REW/SLOW-  
ZZZ  
FF/SLOW+  
I Forward/Reverse File Skip  
Press SKIP  
| or |  
SKIP.  
Each press skips a file.  
Press ACTION to return to the DVD MAIN  
MENU.  
2
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
46  
JPEG Zoom  
(During JPEG Playback.)  
You can enlarge specific portions of a JPEG picture  
and select the zoom ratio using the ZOOM button  
on the remote during JPEG Playback screen.  
Set Zoom size.  
Press ZOOM repeatedly to change display as  
follows.  
PLAY  
Press STOP to return the MP3/WMA/JPEG MENU.  
You can enlarge the center portion of the image to  
one of 2 magnifications.  
REW/  
SLOW-  
FF/  
SLOW+  
Operation can be done during Rotation (below).  
X 1.0 (ORIGINAL)  
X 1.5 (ZOOM 1)  
X 2.0 (ZOOM 2)  
STOP  
STILL  
1st press  
2nd press  
SKIP  
3rd press  
I Use the  
,
,
and  
buttons to move the  
SKIP  
SELECT  
ACTION  
position up, down, left and right.  
(Position cannot be changed on X1.0  
ORIGINAL images.)  
ZOOM  
SET  
JPEG Rotation  
(During JPEG Playback.)  
ANGLE  
You can rotate a JPEG picture using the ANGLE  
button on the remote during JPEG Playback  
screen. (The JPEG picture will be rotated 90 °  
clockwise.)  
Setrotation.  
Press ANGLE repeatedly to change display  
as below.  
Press STOP to return the MP3/WMA/JPEG MENU.  
Operation can be done during Zoom (above).  
The vertical/horizontal ratio of rotated JPEG  
images may vary when they are displayed.  
1st press  
2nd press  
3rd press  
4th press  
MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and  
Thomson multimedia.  
Windows Media, and the Windows logo are trademarks, or registered  
trademarks of Microsoft Corporation in the United States and/or other countries.  
WMA is a compression format developed by Microsoft Corporation. It achieves  
the same sound quality as MP3 with a file size that is smaller than that of MP3.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
47  
DVD Lock Feature*Important: If a remote control button does not work when  
pressed, press the DVD button on the remote  
and try the button again.  
You can prevent playback of DVDs of a specific  
Ready Checklist  
DECK is in DVD mode, press DVD.  
rating level which may be unsuitable for children.  
Some DVDs are encoded with a rating level. If the disc  
rating is higher (stricter) than the one you preset,  
playback will be prohibited.  
DVD Lock (DVD-Video only)  
A 4-digit code must be entered to view a blocked  
program or change rating settings.  
Caution  
Discs not encoded with rating  
level will play even if the jacket  
states it is for mature  
audiences. For these discs, the  
DVD Lock Ratings will not work.  
Press ACTION*  
to display DVD MAIN MENU.  
1
2
DVD MAIN MENU  
Press  
DISC LANGUAGES  
<When DVD Lock is activated>  
AUDIO OUTPUT  
ST I LL MODE  
TV MODE  
to select PARENTAL LOCK,”  
: AUTO  
: 4 : 3 L e t t e r b o x  
and  
PARENTAL LOCK : LEVEL 8  
YOUR SELECTION EXCEEDS THE  
,
PLAYER  
S
RATING LIMIT.  
DO YOU WANT TO CHANGE THE  
LIMIT?  
press SET to display.  
SELECT  
SET  
:
: SET  
: ACTION  
YES  
NO  
END  
SELECT:  
SET  
: SET  
END : DISPLAY  
1) Press NUMBER keys  
ENTER  
4
-
D
I
G
I
T
CODE  
After DVD Lock is set and a  
blocked DVD is played, this  
message will appear.  
The message may differ  
depending on the disc.  
to enter your secret code.  
3
----  
2) Enter same secret code  
again for confirmation.  
3) Press SET to display.  
ENTER  
END  
:
:
0-9  
ACT  
I
ON  
Step 2) not necessary when  
changing rating or secret  
code.  
Take care that you are not  
observed entering the  
secret code.  
To Make Corrections  
Press repeatedly to  
move the cursor.  
Press NUMBER keys to  
make the correction.  
To continue viewing a blocked  
program for now,  
Press  
to select YESand  
SET. Then, enter your 4 digit  
secret code (see step 3 left).  
When NOis selected, blocked  
programs cannot be viewed.  
Press  
4
to select rating level, and  
press SET  
<When blocked programs>  
to select LOCKEDor  
UNLOCKED.”  
PROGRAM RATING EXCEEDED  
LEVEL 0 : LOCK ALL, Playback of all DVDs, CDs, Video  
CDs, WMA, MP3 and JPEG is prohibited.  
(Use to prohibit play of mature theme DVDs not  
encoded with rating level.)  
LEVEL 1 : mature theme DVDs  
LEVEL 2 : DVDs expressly for children can be played back.  
LEVEL 3 to 7 : DVDs for general audiences/children can be  
played back. (DVDs with mature content  
are prohibited.)  
LEVEL 8 : NO LIMIT: (Factory preset)  
All DVDs can be played back.  
Change your secret code  
You will need your current code.  
Do steps 1 ~ 2 left.  
Enter current secret code.  
Press CLEAR to clear the code.  
Do step 4 to enter new code.  
Note  
DO NOT forget your secret code.  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
48  
Settings for DVD Operation  
Once initial settings are done, they  
Press ACTION  
remain in memory (even after power off)  
until changed. This means DECK will  
operate under the same conditions  
(especially DVDs) each time.  
1
2
to display DVD MAIN MENU.  
DVD MAIN MENU  
Press  
to select an item, and  
press SET.  
DISC LANGUAGES  
AUDIO OUTPUT  
ST I LL MODE  
TV MODE  
:
AUTO  
: 4 : 3 L e t t e r b o x  
L E V E L  
Ready Checklist  
P A R E N T A L L O C K  
:
8
DECK is in DVD mode, press DVD.  
SELECT  
SET  
END  
:
: SET  
: ACTION  
DISC LANGUAGES (See below)  
All languages offered on the disc can be set.  
If the language not offered is set, the original disc  
language will be selected.  
AUDIO OUTPUT (See p. 50.)  
You can set the audio output that comes from the  
digital audio output terminal.  
NUMBER  
keys  
CLEAR  
STILL MODE (See p. 53.)  
To select FIELD(Field still) or FRAME(Frame  
still) to prevent jitter or make small text or fine  
patterns clearly visible in a still picture. When  
AUTOis set FIELDor FRAMEis selected  
automatically.  
ACTION  
SELECT  
SET  
TV MODE (See p. 53.)  
To select whether the video material for a wide-  
screen will be played back in the Pan & Scan style,  
Letterbox style or 16 : 9 style.  
AUDIOselections  
(Factory preset: English)  
To select the audio soundtrack language.  
English/Spanish/French/Japanese  
Original: Original disc language  
OTHER ✱✱✱✱: Other language selection*1  
Disc Languages (DVD only)  
SUBTITLEselections  
(Factory preset: AUTO)  
To select and set the language of the audio  
soundtrack, subtitles, or title/DVD menus for all discs  
to be played.  
To select the subtitle language.  
AUTO: Same language selected  
for AUDIO”  
If language set for AUDIOis used in  
playback, subtitles will not appear.  
If another language is used during  
playback, the subtitles will appear  
in the language selected at AUDIO”  
setup.  
DVD MAIN MENU  
Press  
DISC LANGUAGES  
to select  
3
AUDIO OUTPUT  
ST I LL MODE  
TV MODE  
:
AUTO  
: 4 : 3 L e t t e r b o x  
L E V E L  
DISC LANGUAGES,”  
and  
press SET  
to display screen.  
P A R E N T A L L O C K  
:
8
SELECT  
SET  
:
: SET  
: ACTION  
END  
English/Spanish/French/Japanese  
OTHER ✱✱✱✱: Other language selection*1  
MENUSselections  
DISC LANGUAGES  
: E n g l i s h  
(factory preset: English)  
Press  
AUDIO  
To select the language used in title  
menus or DVD menus.  
English/Spanish/French/Japanese  
OTHER ✱✱✱✱: Other language selection*1  
SUBT I TLE : AUTO  
to select an item, and  
press SET repeatedly  
for desired language.  
(Please refer right.)  
4
5
MENUS  
: E n g l i s h  
SELECT  
SET  
:
: SET  
END  
: ACTION  
To enter OTHER ✱✱✱✱ code  
number,  
Press NUMBER keys (Please refer to  
language codes on p. 54).  
Press ACTION to redisplay DVD MAIN  
MENU and go to step 2 to setup another  
item.  
To make corrections, press  
repeatedly to delete language code  
number, and correct.  
Or, press ACTION twice to exit.  
*1 If the selected language is not offered,  
the original disc language is selected.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
49  
Settings for DVD Operation (continued)  
Audio Output  
Select the digital output to be output from the optical  
digital audio output connector of DECK.  
Ready Checklist  
DECK is in DVD mode, press DVD.  
Press ACTION*  
Recommended setting  
Type of amplifier  
to be connected  
to display DVD MAIN MENU.  
1
2
Dolby  
Digital  
LPCM  
(DVD)  
DTS  
DVD MAIN MENU  
Press  
to select  
AUDIO OUTPUT,”  
and  
press SET  
to display screen.  
DISC LANGUAGES  
No amplifier is connected  
AUDIO OUTPUT  
ST I LL MODE  
TV MODE  
: AUTO  
: 4 : 3 L e t t e r b o x  
AV amplifier (with digital  
audio input connector)  
withoutDolbyDigital/DTS  
decoder  
P A R E N T A L L O C K  
:
L E V E L  
8
PCM*1  
PCM*1  
PCM  
PCM  
SELECT  
SET  
END  
:
: SET  
: ACTION  
AVamplifierincluding  
Dolby Digital decoder  
Bitstream  
Bitstream  
PCM  
PCM  
AUDIO OUTPUT  
Press  
to select an item,  
and  
press SET  
repeatedly for  
output. (See below.)  
AVamplifierincluding  
DolbyDigital/DTSdecoder  
2
LPCM(DVD)  
: OFF  
*
3
D o l b y D i g i t a l : B i t s t r e a m  
Bitstream  
d t s  
DRC  
SPEAKER SETUP  
: B i t s t r e a m  
: OFF  
Make settings according to amplifier  
connected to optical audio output as shown  
SELECT  
SET  
END  
:
: SET  
: ACTION  
in above table.  
*1 When connecting an amplifier (with an  
optical digital input connector) which does  
not contain the Dolby Digital or DTS  
decoder, be sure to select PCM.  
If Bitstreamis selected, starting DVD play  
may cause such a high level of noise as to  
be harmful to your ears and damage the  
speakers.  
I LPCM (DVD)selections  
OFF: Linear PCM of less than 48 kHz/16 bit is  
output. When playing DVDs recorded in linear  
PCM of over 48 kHz/20 bit, no digital audio is  
output. (Factory preset)  
PCM: When playing DVDs recorded in linear PCM of  
48 kHz/20 bit/24 bit or more, digital audio  
converted to 44.1 kHz/16 bit or 48 kHz/16 bit is  
output.  
*2 When a DTS decoder is connected, please  
(Digital output of PCM audio is restricted to48  
kHz/16 bit or below for copyright protection.)  
select Bitstreamin dts.  
I Dolby Digitalselections  
Bitstream: Dolby Digital bitstream (1 ch - 5.1 ch) is  
output. (Factory preset)  
PCM: When you have connected a amplifier that  
doesnt have a built-in Dolby Digital decoder.  
I dtsselections  
Bitstream: DTS bitstream is output. (Factory preset)  
PCM: When you have connected a amplifier that  
doesnt have a built-in DTS decoder.  
I
DRC (Dynamic Range Compression)”  
selections  
OFF: Normal audio range is selected. (Factory preset)  
ON: For dynamic sound even at low volume, this  
is useful for late-night listening. [Dolby Digital  
DVDs only].  
I
SPEAKER SETUP  
See pages 51, 52, 53.  
Press ACTION to redisplay DVD MAIN  
MENU and go to step 2 to setup another  
item.  
4
Or, press ACTION twice to exit.  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
50  
*Important: If a remote control button does not work when pressed,  
press the DVD button on the remote and try the button again.  
Speaker Output Setup  
Set the number of speakers connected to the receiver  
(amplifier, decoder.) (See pp. 14, 15.)  
Do steps 1~3 on page 50.  
1
AUDIO OUTPUT  
Press  
LPCM(DVD)  
: OFF  
to select SPEAKER  
SETUP,and  
press SET to display  
SPEAKER SETUP  
screen.  
2
D o l b y D i g i t a l : B i t s t r e a m  
d t s  
DRC  
: B i t s t r e a m  
: OFF  
SPEAKER SETUP  
SELECT  
SET  
END  
:
: SET  
: ACTION  
SPEAKER SETUP  
Press  
SPEAKER OUTPUT : MULTI-CHANNEL  
SPEAKER SIZE  
OUTPUT BALANCE  
DELAY TIME  
3
to select SPEAKER  
OUTPUT,”  
and  
SELECT  
SET  
:
ACTION  
SELECT  
press SET repeatedly.  
(See below.)  
: SET  
END  
: ACTION  
I SPEAKER OUTPUT  
MULTI-CHANNEL: (Factory preset)  
Use this setting when 3 or more speakers are  
connected. In this case, it is necessary to set  
[SPEAKER SIZE], [OUTPUT BALANCE], and  
[DELAY TIME].  
SET  
2-CHANNEL:  
When 2 speakers are connected, it is not  
necessary to set [SPEAKER SIZE], [OUTPUT  
BALANCE], and [DELAY TIME] (these setting  
menu are not displayed.)  
Press ACTION three times to exit.  
4
Speaker Size Setup  
Speaker frequency properties and the existence of speakers is set.  
Do steps 1~2 of Speaker Output Setupabove.  
1
SPEAKER SIZE  
Press  
FRONT  
: LARGE  
: LARGE  
: LARGE  
2
to select SPEAKER SIZE,and press SET  
to display SPEAKER SIZE screen.  
Press  
CENTER  
SURROUND  
SUBWOOFER  
:
ON  
SELECT  
SET  
:
to select an item, and press SET  
repeatedly. (See below table.)  
: SET  
: ACTION  
END  
Remark  
Menu item  
Setting  
When the front speakers (R/L) supports low-frequency (under 100 Hz) reproduction.  
Select when the front speakers (R/L) does not support low-frequency reproduction.  
LARGE(factory preset) When the center speaker supports low-frequency (under 100 Hz) reproduction.  
Select when the center speaker does not support low-frequency reproduction.  
If there is no center speaker.  
LARGE(factory preset) When the surround speakers (R/L) supports low-frequency (under 100 Hz) reproduction.  
LARGE(factory preset)  
FRONT  
SMALL  
CENTER  
SMALL  
NONE  
SURROUND  
SMALL  
NONE  
Select when the surround speakers (R/L) does not support low-frequency reproduction.  
If there is no surround speaker.  
ON(factory preset)  
OFF  
If there is a subwoofer.  
If there is no subwoofer speaker.  
SUBWOOFER  
**If SUBWOOFER is set to OFF,”  
the front speakers are set to  
Press ACTION four times to exit.  
3
LARGEautomatically.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
51  
Settings for DVD Operation (continued)  
Output Balance Setup  
Adjust the volume level output from the speakers. To adjust, play a disc or set the TEST SIGNAL”  
(p.53) to ON. Then adjust while confirming the volume. (Even if OFFor "NONE" is set in SPEAKER  
SIZE,the speaker OUTPUT BALANCE can still be set.)  
Do steps 1~2 of Speaker Output Setupon page 51.  
1
2
OUTPUT BALANCE  
Press  
*
CENTER  
: 0dB  
to select OUTPUT BALANCE,and press SET  
to display OUTPUT BALANCE screen.  
Press  
SURROUND(R) : 0dB  
SURROUND(L)  
SUBWOOFER  
TEST SIGNAL  
: 0dB  
: 0dB  
: OFF  
SELECT  
SET  
:
to select an item, and press SET repeatedly.  
(See below table.)  
: SET  
: ACTION  
END  
Remark  
Menu item  
Setting  
Adjust so that the center speaker volume is virtually the same  
level (-6dB ~ +6dB) as the front speakers.  
CENTER  
-6dB~+6dB  
Adjust so that the surround speaker(R) volume is virtually  
the same level (-6dB ~ +6dB) as the front speakers.  
SURROUND(R)  
SURROUND(L)  
SUBWOOFER  
Adjust so that the surround speaker(L) volume is virtually  
the same level (-6dB ~ +6dB) as the front speakers.  
0dB(factory preset)  
Adjust so that the subwoofer speaker volume is optimum.  
However, because no test sound will come from the  
subwoofer, play a disc to confirm, then adjust.  
TEST SIGNAL : Switch test signal used for OUTPUT BALANCE setting to OFFor FRONT(L)....  
See page 53.  
Press ACTION four times to exit.  
3
Delay Time Setup  
[See <Speaker Position> p.53.]  
To enjoy 5.1 CH sound, it is ideal to place all  
speakers, except the subwoofer, in a circular  
arrangement. (See <Speaker Position> p. 53.)  
If this is not possible, setting Delay Time gives the  
sound output a delayed effect which gives you the  
illusion of the ideal listening position. (See right.)  
,
: Delay time as 0ms  
(Factory prest)  
C1  
B1  
,
<
: Find the distance  
,
in the  
table (below) and change to  
the recommended setting.  
Do steps 1~2 of Speaker Output  
Center speaker  
B1  
1 Setupon page 51.  
Distance B1  
Setting  
Press  
1
/2  
Approx. 50 cm (1 feet)  
1.3 ms  
2.6 ms  
3.9 ms  
5.3 ms  
2
to select DELAY TIME,and press SET  
to display DELAY TIME screen.  
Press  
to select an item, and press SET  
repeatedly. (See below.)  
Approx. 100 cm (3 feet)  
Approx. 150 cm (5 feet)  
Approx. 200 cm (6 feet)  
C1 Surround speaker  
Remark  
Menu item  
Setting  
0ms 1ms 2ms 3ms 4ms 5ms  
CENTER  
Distance C1  
Setting  
Setting a delay effect.  
0ms(Factory preset)  
0ms 5ms 10ms 15ms 20ms  
Approx. 200 cm (6 feet)  
Approx. 400 cm (12 feet)  
Approx. 600 cm (18 feet)  
5.3 ms  
10.6 ms  
15.9 ms  
SURROUND  
Press ACTION three times to exit.  
3
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
52  
*Important: If a remote control button does not work when pressed,  
press the DVD button on the remote and try the button again.  
Test Signal Setup  
Still Mode  
Set to reduce jitter in a displayed still picture or a motion  
picture.  
This feature assists in the setting of  
OUTPUT BALANCE. Starting with (L) front  
speaker, a test sound is output in clockwise  
order. While the test signal is output, adjust  
the output of the center speaker and  
Surround speaker (R/L).  
Press ACTION  
1
to display DVD MAIN MENU.  
DVD MAIN MENU  
Press  
DISC LANGUAGES  
(See Output Balance Setup.P. 52.)  
to select STILL MODE,”  
and  
2
AUDIO OUTPUT  
ST I LL MODE  
TV MODE  
: AUTO  
Do steps 1~2 of Output  
: 4 : 3 L e t t e r b o x  
P A R E N T A L L O C K  
:
L E V E L  
8
press SET repeatedly  
for mode. (See below.)  
1 Balance Setupon page 52.  
SELECT  
SET  
END  
:
OUTPUT BALANCE  
Press  
: SET  
: ACTION  
CENTER  
: 0dB  
2
to select TEST  
SIGNAL,and  
press SET.  
SURROUND(R) : 0dB  
SURROUND(L)  
SUBWOOFER  
TEST SIIGNAL  
: 0dB  
: 0dB  
: OFF  
AUTO: FIELD(Field still) or FRAME(Frame still) is  
automatically selected during the still mode.  
(Factory preset)  
FIELD: FIELD(Field still) is always selected.  
This setting will reduce jitter when compared  
with AUTOon some discs.  
FRAME:FRAME(Frame still) is always selected.  
Some texts and fine patterns will be seen clearly  
when compared with AUTOon some discs.  
SELECT  
SET  
END  
:
(See below.)  
: SET  
: ACTION  
No sound will come from the subwoofer.  
Adjust as desired when playing a disc.  
While the TEST SIGNAL is output, if the  
setting change in the OUTPUT BALANCE  
(p. 52) is under 2 seconds, the output will  
switch to the next speaker. The speaker  
name from which the TEST SIGNAL is  
currently being output is displayed.  
Press ACTION  
3 to exit this mode.  
TV Mode  
(Example; "TEST SIGNAL : CENTER")  
Set the screen display style for wide-screen video  
material playback.  
2sec  
CENTER  
2sec  
OFF  
FRONT(L)  
FRONT(R)  
2sec  
SURROUND(R)  
Press ACTION  
2sec  
to display DVD MAIN MENU.  
1
DVD MAIN MENU  
Press  
to select TV  
SURROUND(L)  
DISC LANGUAGES  
MODE,and press SET  
repeatedly for  
mode.  
2sec  
2
AUDIO OUTPUT  
ST I LL MODE  
TV MODE  
: AUTO  
: 4 : 3 L e t t e r b o x  
P A R E N T A L L O C K  
:
L E V E L  
8
Press ACTION four times to exit.  
3
(See below.)  
SELECT  
SET  
END  
:
: SET  
: ACTION  
FRONT(L)  
FRONT(R)  
B1  
4:3 Pan & Scan (Factory preset) :  
Wide-screen video data is played in  
Pan & Scan style (left and right of screen  
is trimmed.)  
CENTER  
Video data not formatted in Pan & Scan  
will play in letterbox style.  
4:3 Letterbox :  
SUBWOOFER  
Listening  
position  
Wide-screen video data is played in  
Letterbox style (top and bottom of screen  
has black margin).  
SURROUND(L)  
SURROUND(R)  
C1  
16:9 :  
Set 16:9when using Wide-screen TV.  
Press ACTION  
<Speaker Position>  
3
to exit this mode.  
[Pan & Scan (Factory preset)]  
[Letterbox]  
TV Mode  
Example  
Download from Www.Somanuals.com. All Manuals Search And Download.  
53  
Language Code List  
Enter the appropriate code number for the initial settings AUDIO, SUBTITLEand/or  
MENUS(see p. 49).  
Code Language  
6565 Afar  
Code Language  
7079 Faroese  
7082 French  
7089 Frisian  
7165 Irish  
Code Language  
7678 Lingala  
Code Language  
8375 Slovak  
6566 Abkhazian  
6570 Afrikaans  
6577 Ameharic  
6582 Arabic  
7679 Laothian  
7684 Lithuanian  
8376 Slovenian  
8377 Samoan  
7686 Latvian, Lettish 8378 Shona  
7168 Scots Gaelic  
7176 Galician  
7178 Guarani  
7185 Gujarati  
7265 Hausa  
7771 Malagasy  
7773 Maori  
8379 Somali  
8381 Albanian  
8382 Serbian  
8385 Sundanese  
8386 Swedish  
8387 Swahili  
8465 Tamil  
6583 Assamese  
6588 Aymara  
6590 Azerbaijani  
6665 Bashkir  
6669 Byelorussian  
6671 Bulgarian  
6672 Bihari  
7775 Macedonian  
7776 Malayalam  
7778 Mongolian  
7779 Moldavian  
7782 Marathi  
7783 Malay  
7273 Hindi  
7282 Croatian  
7285 Hungarian  
8469 Telugu  
8471 Tajik  
6678 Bengali;Bangla 7289 Armenian  
7784 Maltese  
7789 Burmese  
7865 Nauru  
6679 Tibetan  
6682 Breton  
6765 Catalan  
6779 Corsican  
6783 Czech  
6789 Welsh  
6865 Danish  
6869 German  
6890 Bhutani  
6976 Greek  
7365 Interlingua  
7378 Indonesian  
7383 Icelandic  
7384 Italian  
8472 Thai  
8473 Tigrinya  
8475 Turkmen  
8476 Tagalog  
8479 Tonga  
8482 Turkish  
8484 Tatar  
7869 Nepali  
7876 Dutch  
7387 Hebrew  
7465 Japanese  
7473 Yiddish  
7487 Javanese  
7565 Georgian  
7575 Kazakh  
7576 Greenlandic  
7577 Cambodian  
7578 Kannada  
7579 Korean  
7583 Kashmiri  
7585 Kurdish  
7589 Kirghiz  
7879 Norwegian  
7982 Oriya  
8065 Panjabi  
8076 Polish  
8487 Twi  
8083 Pashto, Pushto 8575 Ukrainian  
8084 Portuguese  
8185 Quechua  
8277 Rhaeto-Romance  
8279 Romanian  
8285 Russian  
8365 Sanskrit  
8368 Sindhi  
8582 Urdu  
6978 English  
6979 Esperanto  
6983 Spanish  
6984 Estonian  
6985 Basque  
7065 Persian  
7073 Finnish  
7074 Fiji  
8590 Uzbek  
8673 Vietnamese  
8679 Volapük  
8779 Wolof  
8872 Xhosa  
8979 Yoruba  
8372 Serbo-Croatian 9072 Chinese  
8373 Singhalese 9085 Zulu  
7665 Latin  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
54  
Warning and Instruction Displays  
These displays will alert you to a missed operation or provide further instructions.  
Page  
OSD  
Caution  
PLEASE SET CLOCK BY  
PRESSING ACTION KEY  
If you attempt to set or review a Timer  
Recording and the Clock is not set...  
24  
If DECK is not in Stop mode or a cassette with  
record tab is not inserted 2 minutes before a  
Timer Recording is about to begin...  
PLEASE PREPARE FOR TIMER  
REC  
24  
25  
CHECK CASSETTE  
RECORD TAB  
If you press REC on the remote control or DECK,  
and a cassette is inserted with no record tab...  
6
If you press PLAY, FF, REW, or REC on the  
remote control or DECK without a cassette  
inserted...  
20  
21  
NO CASSETTE  
TO CANCEL TIMER REC  
HOLD DOWN STOP KEY  
FOR APPROX 3 SEC  
If you press STOP or POWER during a Timer  
Recording...  
(visible in VCR mode only)  
25  
VIDEO HEADS MAY NEED  
CLEANING PLEASE INSERT  
HEAD CLEANING CASSETTE  
OR REFER TO MANUAL  
If head cleaning becomes necessary while  
playing back a tape...  
6
END  
: PLAY  
If you press a function button other than STOP/  
EJECT or POWER while DECK is  
in VCR Lock mode...  
VCR LOCK ACTIVATED  
33  
If you press an invalid key on the remote while  
in CABLE/DSS mode...  
REMOTE CONTROL IS SET  
TO CABLE/DSS MODE  
USE VCR : VCR KEY  
28  
29  
34  
USE DVD : DVD KEY  
If you press an invalid key on the remote while  
in TV mode...  
REMOTE CONTROL IS SET  
TO TV MODE  
USE VCR : VCR KEY  
USE DVD : DVD KEY  
28  
29  
34  
PLEASE CHECK THE DISC,  
AND FOR STAINS OR  
SCRATCHES ON DISC  
If you press PLAY, and DECK reads data from a  
stained or scratched disc in DVD mode.  
4
3
4
Playback of a disc with different region number  
was attempted. Only discs marked region 1,  
ALL, or those that include 1are playable on  
this DECK.  
THIS DISC MAY NOT BE PLAYED  
IN YOUR REGION  
THIS TYPE OF DISC CANNOT BE  
PLAYED. PLEASE INSERT A  
DIFFERENT DISC  
An unusable disc is inserted in the DECK.  
This file format cannot be played.  
CANNOT PLAY THIS FILE  
45  
45  
21  
(Appears during MP3/WMA/JPEG file playback)  
This file is copyright protected and cannot be  
played back. (Playback is prohibited.)  
(WMA only)  
THIS FILE IS PROTECTED  
IT IS PROHIBITED TO COPY  
DVD/VIDEO CD/CD TO VHS  
If you press REC in DVD mode...  
Download from Www.Somanuals.com. All Manuals Search And Download.  
55  
Before Requesting Service  
Check the following points if you are having trouble with your DECK.  
Power  
No power…  
Correction  
Completely insert Power Plug into an AC outlet.  
Set POWER button to on.  
Make sure power source is active.  
Auto power-off (shutoff) occurs after about 5 min.  
in DVD mode with no operation, or if there is no  
broadcast signal in TV or Playback mode.  
Turn the power back on. (pp. 23, 33)  
Power turns itself off...  
Correction  
Recording & Playback  
TV program cannot be recorded...  
Check connections between DECK, external  
antenna, and TV.  
Check channel selections.  
Make sure your antenna system (CABLE or TV) is  
correctly set. (Channels [p. 18])  
Make sure cassette record tab is intact. (p. 6)  
Confirm that clock is set to current time and date.  
Make sure Cable/DSS box (if used) is left on and  
tuned to channel to be recorded.  
Timer recording cannot be  
performed…  
Set recording start/stop times correctly. (p. 24)  
Timer recording may not be performed or continued  
if a power interruption occurs before or during a  
Timer Recording, even after power is restored.  
Select channel 3 or 4 on TV to match VCR output  
channel (3 or 4) (p. 16) or select LINE.  
Set VCR/TV selector to VCR.”  
There is no playback picture, or the  
playback picture is noisy or contains  
streaks...  
Adjust TRACKING control in either direction. (p. 6)  
Try Head Cleaning. (p. 6)  
Set TVs Vertical Hold Control to MANUAL, then  
adjust.  
During special effects playback,  
picture may contain some vertical  
jitter when using a TV with an  
Automatic Vertical Hold Control...  
Make sure DECK power is on.  
Check Remote batteries.  
DECK cannot be controlled...  
Make sure VCR LOCK is set to off. (p. 33)  
Make sure Remote is in proper mode. (p. 28)  
Make sure Timer Recording is not in progress.  
Remote Control  
Correction  
DECK cannot be remote controlled...  
Make sure DECK power is on.  
Make sure Remote is in VCR mode.  
Aim Remote Control directly at remote sensor on DECK. (p.9)  
Avoid any object blocking signal path.  
Check Remote batteries. (p. 4)  
Exposing DECK remote sensor to direct fluorescent  
or outdoor light may cause signal interference.  
PROG functions are not available in COMPONENT  
Video Output and S-VIDEO OUT. Set TV to either RF  
IN or VIDEO IN. (p. 10)  
PROG buttons do not respond...  
Check Remote batteries. (p. 4)  
Press VCR or DVD button for DVD/VCR mode. (p. 28)  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
56  
Check the following points if you are having trouble with your DECK.  
DVD/ Video CD/ CD  
Correction  
Play fails to start even when PLAY is  
pressed...  
This DECK cannot play discs other than DVDs,  
Video CDs and CDs.  
The disc may be dirty and require cleaning.  
Play starts but then stops immediately... Be sure disc is installed with label side up.  
Picture is distorted during rapid  
advance or rapid reverse...  
The picture will be somewhat distorted at times:  
this is normal.  
No Forward/Reverse Scene Search  
play...  
Some discs may have sections which prohibit  
Forward/Reverse Scene Search. (p. 23)  
Play does not start even when title is  
selected...  
Confirm the DVD LOCKsetting. (p. 48)  
Audio soundtrack and/or subtitle  
language is not the one selected at  
the initial settings...  
If the audio soundtrack and/or subtitle language  
selected at DVD initial settings does not exist  
on the disc, it will not be accessible.  
No subtitles...  
Subtitles appear only when available on disc.  
• “OFFis selected at the changing subtitle  
language. Select ONat the Subtitle Languages”  
section (p. 36) to display the subtitles.  
Alternative audio soundtrack  
(or subtitle) language cannot be  
selected...  
Alternative language cannot be selected with discs  
which do not contain more than one language.  
For some discs, alternative language cannot be  
selected with the AUDIO or SUB TITLE button.  
Try selecting it from the DVD MAIN MENU if available.  
Angle cannot be changed...  
This function is dependent on software availability.  
Even if disc has multiple angles, they may be  
recorded for specific scenes only (ANGLE  
indicator on DECK lights up). (p. 37)  
Correction  
Miscellaneous  
Programs cannot be viewed on TV...  
Make sure TV is set to output of DECK.  
Check connections between DECK,  
external antenna, and TV.  
Set VCR/TV selector to TV.(p. 21)  
Make sure proper signal source is selected.  
Insert the cassette with window side up; record  
tab facing you.  
Video cassette cannot be inserted...  
Video cassette ejects when  
Make sure cassette record tab is intact. (p. 6)  
a recording is started or the power is  
turned off for timer recording...  
In Stop mode, the motor (CYLINDER)  
continues to rotate...  
To enable Quick play mechanism, the cylinder will  
rotate for about 3 minutes. This reduces response  
time from Stop to Play mode.  
The disc cannot be removed..  
First, unplug DECK. Then, prepare a rigid wire  
(e.g. an extended paper clip) and, applying  
moderate force, insert it straight into the hole at the  
base of the tray. The tray will eject a little. Now, pull  
the tray all the way out and remove the disc. (p. 9)  
If you cannot resolve the problem, please call the Customer Call Center for product  
assistance at 1-800-211-PANA (7262).  
To locate an authorized servicenter, please call toll free 1-800-211-PANA (7262).  
or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
57  
Limited Warranty  
PANASONIC CONSUMER ELECTRONICS COMPANY,  
DIVISION OF MATSUSHITA ELECTRIC  
CORPORATION OF AMERICA  
PANASONIC SALES COMPANY, DIVISION OF MATSUSHITA  
ELECTRIC OF PUERTO RICO, INC.,  
AVE. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park,  
Carolina, Puerto Rico 00985  
One Panasonic Way Secaucus, New Jersey 07094  
Panasonic/Quasar Video Products  
Limited Warranty  
Limited Warranty Coverage  
If your product does not work properly because of a defect in materials or workmanship, Panasonic  
Consumer Electronics Company or Panasonic Sales Company (collectively referred to as the warrantor)  
will, for the length of the period indicated on the chart below, which starts with the date of original purchase  
(warranty period), at its option either (a) repair your product with new or refurbished parts, or (b) replace it  
with a new or a refurbished product. The decision to repair or replace will be made by the warrantor.  
Product  
Parts  
Labor  
Contact Number  
Service  
One (1) Year (except  
CCD Image Sensor)  
CCD Image Sensor - 6  
(Six) Months  
Ninety (90) Days  
1-800-211-PANA(7262)  
Carry-In or Mail-In  
Camcorder  
Ninety (90) Days  
DVD/VCR Deck,  
A/V Mixer  
One (1) Year  
Ninety (90) Days  
Ninety (90) Days  
1-800-211-PANA(7262)  
1-800-211-PANA(7262)  
Carry-In or Mail-In  
One (1) Year (except  
CRT)  
CRT - Two (2) Years  
Carry-In: 21CRT  
and Smaller  
In-Home or Carry-In:  
22CRT and Larger  
TV/VCR, TV/DVD,  
TV/DVD/VCR  
Combination  
Ninety (90) Days  
Ninety (90) Days  
Ninety (90) Days  
One (1) Year (except  
CRT)  
CRT - Two (2) Years  
TV/HDR  
Combination  
1-888-843-9788  
In-Home or Carry-In  
Carry-In or Mail-In  
Rechargeable  
Batteries  
(in exchange for  
defective item)  
Ten (10) Days  
Not Applicable  
1-800-211-PANA(7262)  
Tape  
(in exchange for  
defective item)  
Five (5) Days  
Carry-In or Mail-In  
Carry-In or Mail-In  
Not Applicable  
Not Applicable  
1-800-211-PANA(7262)  
1-800-211-PANA(7262)  
Memory Cards  
(in exchange for  
defective item)  
Ninety (90) Days  
During the Laborwarranty period there will be no charge for labor. During the Partswarranty period,  
there will be no charge for parts. You must carry-in or mail-in your product or arrange for in-home service,  
as applicable, during the warranty period.  
If non-rechargeable batteries are included, they are not warranted. This warranty only applies to products  
purchased and serviced in the United States or Puerto Rico. This warranty is extended only to the original  
purchaser of a new product which was not sold as is. A purchase receipt or other proof of the original  
purchase date is required for warranty service.  
Carry-In, Mail-in or In-Home Service  
For Carry-In, Mail-In or In-Home Service (as applicable) in the United States call toll free contact number  
For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax (787)-768-2910.  
In-Home service, if applicable, requires clear, complete and easy access to the product by the authorized  
servicer and does not include removal or re-installation of an installed product. It is possible that certain  
in-home repairs will not be completed in-home, but will require that the product, or parts of the product, be  
removed for shop diagnosis and/or repair and then returned.  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
58  
Limited Warranty Limits And Exclusions  
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT  
COVER normal wear and tear or cosmetic damage, nor does it cover markings or retained images on  
the picture tube resulting from viewing fixed images (including, among other things, letterbox pictures  
on standard 4:3 screen TVs, or non-expanded standard 4:3 pictures on wide screen TVs, or  
onscreen data in a stationary and fixed location). The warranty ALSO DOES NOT COVER damages  
which occurred in shipment, or failures which are caused by products not supplied by the warrantor,  
or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication,  
alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper  
maintenance, power line surge, lightning damage, modification, or commercial use (such as in a hotel,  
office, restaurant, or other business), rental use of the product, service by anyone other than a  
Factory Servicenter or other Authorized Servicer, or damage that is attributable to acts of God.  
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY  
COVERAGE. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL  
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY  
BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, cost of having  
someone remove or re-install an installed unit if applicable, or travel to and from the servicer, loss of  
media or images, data or other memory or recorded content. The items listed are not exclusive, but  
are for illustration only.)  
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF  
MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.  
Some states do not allow the exclusion or limitation of incidental or consequential damages, or  
limitations on how long an implied warranty lasts, so the exclusions may not apply to you.  
This warranty gives you specific legal rights and you may also have other rights which vary from  
state to state. If a problem with this product develops during or after the warranty period, you may  
contact your dealer or Servicenter. If the problem is not handled to your satisfaction, then write to the  
warrantors Consumer Affairs Department at the addresses listed for the warrantor.  
PARTS AND SERVICE (INCLUDING COST OF AN IN-HOME SERVICE CALL, WHERE  
APPLICABLE) WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR  
RESPONSIBILITY.  
Customer Services Directory  
For Product Information, Operating Assistance, Literature Request, Dealer Locations,  
and all Customer Service inquiries please contact:  
1-800-211-PANA (7262), Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.  
or send e-mail : [email protected]  
For hearing or speech impaired TTY users, TTY : 1-877-833-8855  
You can purchase parts, accessories or locate your  
nearest servicenter by visiting our Web Site.  
Accessory Purchases:  
1-800-332-5368 (Customer Orders Only)  
For hearing or speech impaired TTY users, TTY : 1-866-605-1277  
Panasonic Services Company 20421 84th Avenue South, Kent, WA 98032  
(6 am to 5 pm Monday - Friday; 6 am to 10:30 am Saturday; PST)  
(Visa, MasterCard, Discover Card, American Express, Check)  
Service in Puerto Rico  
Matsushita Electric of Puerto Rico, Inc. Panasonic Sales Company/ Factory Servicenter:  
Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985  
Phone (787)750-4300 Fax (787)768-2910  
As of August 2002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
59  
Spanish Quick Use Guide/ Guía para rápida consulta  
CONEXIONES/CONFIGURACION INICIAL (READYTO PLAY)  
Realice la conexión de la antena o TV por cable antes de enchufar el cable de CA.  
El DVD/VCR iniciará automáticamente la fijación de los canales y del reloj al enchufar el cable de CA.  
CONEXIONES  
Para Ant/Cable DVD/VCR TV  
DVD/VCR  
Terminal IN FROM ANT.  
Televisor  
Entrada (IN) desde  
1
Conecte el cable de la antena al terminal IN  
ANT./CABLE  
1
FROM ANT del DVD/VCR.  
Terminal  
OUT TO TV  
Conecte el terminal OUT TO TV del DVD/VCR  
a la entrada de la antena VHF/UHF del TV con  
el cable RF incluido.  
2
2
VHF/UHF  
Para Sistema Digital de Satelite (DSS)/ Convertidor de cable DVD/VCR TV  
Terminal  
Conecte la salida de convertidor de cable  
al terminal IN FROM ANT.  
1
Televisor  
IN FROM ANT. Estuche convertidor  
de TV por cable  
DVD/VCR  
Conecte el terminal OUT TO TV del DVD/VCR  
a la entrada de la antena VHF/UHF del TV con  
el cable RF incluido.  
2
Entrada (IN) desde  
ANT./CABLE  
Terminal  
1
2 OUT TO TV  
CONFIGURACION INICIAL  
VHF/UHF  
Las fijaciones se realizan automáticamente.  
Cuando termina las fijaciones, aparecerá la  
siguiente pantalla.  
Encienda el TV y cambie al canal 3.  
3
1
Enchufe el cable de CA.  
2
El DVD/VCR se encenderá e iniciará las  
fijaciones de los canales y del reloj.  
6
/
8
/
2003 SUN  
2
:
20P  
M
D
S
T
:
ON  
SETT  
AUTO CLOCK SET  
PLETED  
I
NG  
:
CH 10  
Si no aparece la pantalla de abajo, compruebe  
la conexión del DVD/VCR-TV y si el canal del  
TV está a 3, intennte cambiando al canal 4.  
Para cambiar el canal de salida del DVD/VCR,  
consulte las instrucciones de Canal de salida  
del VCR(informaciones en inglés página 19).  
C
OM  
Si aparece en la pantalla AUTO CLOCK SET IS  
INCOMPLETE (FIJACION AUTOMATICA DEL  
RELOJ ES INCOMPLETO), Ajuste el reloj  
como se describe a continuación.  
Enchufe el cable de CA.  
AUTO CLOCK SET IS  
I
NCOMPLETE  
Al inicio, el idioma de la  
CH AUTO SET PROCEEDING  
pantalla está fijado a  
CANCEL : STOP  
PLEASE SET CLOCK BY  
PRESSING ACT ON KEY  
I
inglés.  
Para cambiar el idioma,  
AJUSTE MANUAL DEL RELOJ  
Si la fijación ha sido incompleta.  
AUTO CLOCK SET  
seleccione la pantalla  
PROCEEDING  
MENU (informaciones en  
Presione la tecla ACTION en el control remoto  
para visualizar la pantalla del menú SET  
inglés página 18).  
1
CANCEL : STOP  
CLOCK.  
Si está usanndo un convertidor de TV por cable y  
en su area hay un canal de Public Broadcast  
Station (PBS), ajuste su convertidor al canal PBS  
de su area. Si está usando un receptor DSS, este  
debe estar apagado.  
SET  
CLOCK  
:
1/  
/
----------------D--S-T-:O-N--  
SEL  
EC  
T
MONTH  
SELE  
SET  
EXIT  
CT  
:
:
SET  
ACT  
:
I
ON  
Nota  
Presione  
para seleccionar el mes y SET  
2
3
Los botones de funciones no funcionan durante  
la configuración inicial.  
para ajustar. De la misma forma, seleccione y  
ajuste la fecha, año, hora y DST (hora de  
verano).  
Para retirar un cassette durante el ajuste  
automático, presione EJECT en el control remoto  
o STOP dos veces en el aparato. En este caso,  
los ajustes de los canales y la hora se deben  
hacer manualmente. Para los ajustes seleccione  
la pantalla MENU (informaciones en inglés  
página 18).  
Dependiendo de las condiciones, el ajuste  
automático puede durar más de 30 minutos.  
En ese caso, presione STOP para detener el  
ajuste automático y realice los ajustes  
manualmente en la pantalla MENU.  
SET  
CLOCK  
6
/
8
/
2003 SUN  
2
:
20  
PM  
ST:  
----------------D----O--N-  
SET CO  
MPLETED  
Presione dos veces la tecla ACTION para  
poner el RELOJ en marcha y salir.  
PRECAUCIÓN  
Al usar cables coaxiales RF del tipo tuerca,  
apriételos solamente con los dedos. Un apriete  
excesivo puede dañar los terminales.  
o
r
a
y
u
d
a
l
la  
m
e
a
l
1-  
8
0
0
-2  
1
1
-
P
A
N
A
(7  
2
6
2
)
o
e
n
v
i
e
e
-m  
a
i
l
a
:
c
o
n
s
u
m
erproducts@panasonic.com
Download from Www.Somanuals.com. All Manuals Search And Download.  
60  
Operaciones básicas para la reproducción  
Programación fácil para la  
grabación con temporizador  
Inserte un cassette,  
La alimentación del DECK se activa.  
En la Pantalla de Visualización Multi  
Función se ilumina VCR.  
1
Presione PROG  
para visualizar la pantalla de Programacion.  
1
2
Presione PLAY para reproducir el cassette.  
Si el cassette no tiene la lengüeta de  
prevención de grabación (página 6), se  
inicia la reproducción automáticamente.  
1) Para ajustar la FECHA de  
INICIO PARADA  
CA  
FECHA  
2
7
SAB  
--:-- --:-- --  
grabación, presione  
para seleccionar:  
SLP  
HOY  
ELEGIR FECHA DE INICIO  
1-31 = una vez, o  
ELEGIR  
FIJAR  
:
:
DIARIO = a la misma hora  
de lunes a viernes, o  
SEMANA = a la misma  
hora cada semana y  
presione SET para ajustar.  
SET  
Detalles especiales durante la grabación  
TERMINAR:PROG  
Presione FF/SLOW+ o REW/SLOW- para  
búsqueda de escenas hacia delante/ hacia  
atrás. Presione PLAY para liberar. Durante  
la búsqueda, cada vez que presione FF o  
REW se cambia la velocidad como sigue:  
[SLP] aprox. 21X aprox. 9X  
Orden para elegir  
Ejemplo  
Fecha de hoy  
2
8
9
6
1
31  
/
Orden para elegir  
DIARIO  
7
[LP]  
[SP]  
aprox. 9X aprox. 7X  
aprox. 7X aprox. 3X  
SEMANAL  
SAB  
SEMANAL  
LUN  
SEMANAL  
DOM  
(
)
(
)
(
)
Si la imágen se interrumpe con la velocidad de  
21X, 9X o 7X, cambie la velocidad a 9X, 7X o  
3X.  
Presione PAUSE/STILL para imagen Fija  
(Congelada).  
Presione PLAY para liberar.  
2) Para ajustar los ítems que quedan,  
presione para seleccionar y presione SET  
para ajustar los tiempos de INICIO/PARADA,  
CANAL, o entrada de LINEA (página 35), y  
velocidad del cassette (SP, LP, SLP).  
Presione PAUSE/STILL en el modo de  
imagen fija para imágenes cuadro a cuadro.  
Presione PLAY para liberar.  
Presione FF/SLOW+ o REW/SLOW- en el  
modo de imagen fija para cambiar la  
velocidad de las imágenes a cámara lenta.  
Presione PROG para finalizar PROGRAM.  
FE INIC  
PARADA CA VEL  
Presione  
3
7
2 : 00  
P
3
:
:
:
:
20  
-- -- --  
-- -- --  
-- -- --  
P
02 SLP  
-- --  
-- --  
-- --  
:
:
:
-- --  
-- --  
-- --  
para seleccionar un número  
que no está usando para  
ingresar mas programas y  
C
AN  
C
ELAR  
:
A
DD/DLT  
ELEGIR 1- 8  
:
ENTRAR : SET  
SALIR PROG  
presione SET  
para ajustar.  
:
Presione STOP para detener el cassette.  
3
Presione REW/SLOW- o FF/SLOW+ en el  
modo de parada para rebobinado/avance  
rápido del cassette.  
Presione EJECT en el control remoto,  
o STOP/EJECT en el DECK para expulsar  
el cassette.  
Luego repita el paso 2.  
O
Presione nuevamente  
PROG para salir.  
Operaciones básicas para la grabación  
Inserte el cassette con lengüeta de  
protección de grabación (página 6).  
1
Presione CH  
/
, o las teclas de números  
2
3
para seleccionar el canal.  
Presione SPEED para seleccionar la  
velocidad de grabación (página 6)  
Grabación de un toque  
Presione REC repetidamente para ajustar la  
hora de grabación (30 min - 4 horas).  
SP = Reproducción estándar,  
LP = Larga duración,  
La videograbadora termina la grabación  
a una hora programada.  
SLP = Superlarga duración.  
4 Presione REC para comenzar a grabar.  
Para eliminar escenas indeseadas, presione  
PAUSE/STILL para hacer una pausa, y al  
presionar nuevamente continua la grabación.  
No podrá ver otro canal durante la  
grabación.  
Grabación normal  
4:00 3:00  
0:30  
2:00  
1:00  
1:30  
5 Presione STOP para detener la grabación.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
61  
Spanish Quick Use Guide/ Guía para rápida consulta  
Funcionnamiento del DVD utilizando  
visualizaciones en pantalla  
Cuando se presiona DISPLAY, la visualización en  
pantalla muestra la información del disco (título / capítulo  
/ número de lista, tiempo transcurrido de reproducción,  
audio / idioma del subtítulo, y ángulo) e información  
(repetir la reproducción, modo reproducción, Karaoke  
vocal encendido / apagado, etc.).  
Operaciones básicas del DVD  
Presione POWER en el control remoto o el  
1 aparato.  
Presione DVD para seleccionar el modo DVD.  
2
1) Presione OPEN/CLOSE.  
3 2) Ponga un disco en la bandeja de disco.  
Sujete el disco sin tocar ninguna de sus  
superficies, póngalo con el lado donde esté  
impreso el título hacia arriba, alinéelo con las  
guías y póngalo en su posición apropiada.  
Disco de 3(8 cm) / Disco de 5(12 cm)  
Presione DISPLAY en el modo reproducción  
1 o parada para visualizar las visualizaciones en  
pantalla.  
Cada vez que se presione DISPLAY, la  
visualización en pantalla cambia como se  
muestra a continuación.  
Presione PLAY para iniciar la reproducción.  
4
La bandeja del disco se cierra  
Información seleccionada del disco  
Información seleccionada del DECK  
Pantalla normal  
automáticamente.  
Si está usando un DVD interactivo (Interactive  
DVD) o un Vídeo CD con contol de  
reproducción (playback control) y aparece un  
menú de títulos (TITLE MENU) en la pantalla,  
siga al paso 5.  
Presione  
o las teclas numéricas para  
5
seleccionar el artículo deseado.  
Presione  
(o  
) para seleccionar el ítem  
Presione SET o PLAY para la reproducción.  
Si usa las teclas numéricas, la  
reproducción comienza automáticamente.  
2 deseado.  
Presione SET para ajustar.  
Presione  
para seleccionar el ajuste  
Presione STOP para parar la reproducción.  
3 deseado.  
6
7
Presione SET para ajustar.  
Para volver a la pantalla normal,  
Presione OPEN/CLOSE para expulsar el disco.  
Presione repetidamente CLEAR o DISPLAY.  
IPara buscar una escena particular  
Búsqueda hacia adelante  
<Ejemplo (Vídeo DVD)>  
Presione FF/SLOW+ en el modo de reproducción.  
Búsqueda hacia atrás  
T I TULO  
:
12  
DVD  
00 : 12 : 34  
T I TULO  
:
12  
DVD  
00 : 12 : 34  
CAPITULO: 11  
CAPITULO: 24  
Presione REW/SLOW- en el modo de reproducción.  
(Para liberar, presione PLAY)  
IPara saltar un capítulo o una pista  
Salto hacia adelante  
ELEGIR :  
ELEGIR :  
FIJAR : SET SIGUIENTE: DISPLAY  
FIJAR : SET SIGUIENTE: DISPLAY  
Presione SKIP  
l en el modo de reproducción.  
Un capítulo (Vídeo DVD) o una pista (Audio  
DVD/Vídeo CD/CD) se salta cada ves que se  
oprime la tecla.  
<Ejemplo (Vídeo CD)>  
PISTA  
PBC  
:
:
12  
VIDEO CD  
00 : 12 : 34  
PISTA  
PBC  
:
:
17  
VIDEO CD  
00 : 12 : 34  
INACTIVO  
INACTIVO  
Salto hacia atrás  
Presione l  
SKIP en el modo de reproducción.  
IPara ver una imagen fija  
Presione PAUSE/STILL durante la reproducción.  
(Para liberar, presione PLAY)  
FIJAR : SET SIGUIENTE: DISPLAY  
FIJAR : SET SIGUIENTE: DISPLAY  
IPara ver imágenes cuadro a cuadro  
(DVD/Vídeo CD)  
<Ejemplo (Audio DVD)>  
GRUPO  
P I STA  
:
:
1
1
DVD-AUDIO  
00 : 12 : 34  
GRUPO  
P I STA  
:
:
1
1
DVD-AUDIO  
00 : 12 : 34  
Presione PAUSE/STILL en el modo de imagen fija.  
La imagen avanza un cuadro cada vez que  
presiona la tecla. (Para volver a la  
reproducción normal, presione PLAY)  
IPara ver en cámara lenta (DVD/Vídeo CD)  
Presione FF/SLOW+ o REW/SLOW- en el modo  
de imagen fija.  
ELEGIR :  
FIJAR : SET TERMINAR: DISPLAY  
ENTRAR: 0-9  
FIJAR : SET TERMINAR: DISPLAY  
(Para liberar, presione PLAY)  
o
r
a
y
u
d
a
l
la  
m
e
a
l
1-  
8
0
0
-2  
1
1
-
P
A
N
A
(7  
2
6
2
)
o
e
n
v
i
e
e
-m  
a
i
l
a
:
c
o
n
s
u
m
erproducts@panasonic.com
Download from Www.Somanuals.com. All Manuals Search And Download.  
62  
Fijaciones iniciales  
Selección de IDIOMAS DEL  
DISCO [DVD solamente]  
Presione DVD para seleccionar el modo DVD.  
1
Seleccione AUDIO”  
Presione ACTION en el modo de parada para  
(Fijación de fábrica : inglés)  
Inglés / Español / Francés / Japonesa :  
Original : Se seleccionará el idioma  
original de cada disco.  
2
3
visualizar MENU.  
Presione  
para seleccionar el artículo deseado.  
Presione SET.  
IDIOMAS DEL DISCO  
OTRO ✱✱✱✱ : Se puede seleccionar el otro  
Todos los idiomas ofrecidos en el disco pueden ser  
ajustados. Si el idioma ajustado no es ofrecido en el  
disco, se seleccionará el idioma original del disco.  
SALIDA DE AUDIO  
idioma.  
SeleccioneSUBTITULO”  
AUTO : Se seleccionará el mismo que fue  
seleccionado en la preparación de  
AUDIO. (Fijación de fábrica)  
Puede usted ajustar la salida audio procedente del  
terminal de salida audio digital.  
DETENER RASTREO  
Para seleccionar CAMPOo CUADRO fijopara prevenir  
inestabilidad o para permitir ver textos pequeños o  
patrones finos claramente en el modo de imagen fija.  
TV PREFERENCIA  
Para seleccionar cuando el material del vídeo es para  
pantalla ancha y se quiere reproducir en el estilo  
Pan&Scan, en el estilo Letterbox o en el estilo 16:9 en  
la pantalla.  
Si el idioma seleccionado en la preparación  
de AUDIOse utiliza durante la  
reproducción, los subtítulos no aparecerán.  
Si se utiliza otro idioma durante la  
reproducción, los subtítulos aparecerán en el  
idioma seleccionado en la preparación de  
AUDIO”  
Inglés / Español / Francés / Japonesa :  
OTRO ✱✱✱✱ : Se puede seleccionar el otro  
idioma.  
Presione  
para seleccionar el artículo deseado.  
4 Presione SET.  
5 continuar el ajuste.  
Seleccione MENU”  
(Fijación de fábrica : inglés)  
Inglés / Español / Francés / Japonesa :  
OTRO ✱✱✱✱ : Se puede seleccionar el otro  
idioma.  
Volver a visualizar el menú de DVD para  
Presione ACTION y pase al paso 3 para ajustar otro  
ajuste o, para salir, presione ACTION tres veces.  
Cambio del idioma de subtítulos  
[Vídeo DVD solamente]  
Visión desde otro ángulo  
[DVD solamente]  
EI idioma de los subtítulos seleccionado al hacer las  
fijaciones iniciales se puede cambiar por otro idioma  
diferente, si éste se encuentra disponible.  
Algunos discos DVD tienen escenas que han sido  
filmadas simultáneamente desde ángulos diferentes.  
Con estos discos, la misma escena podrá verse desde  
cada uno de estos ángulos diferentes utilizando el botón  
ANGLE.  
Presione SUBTITLE durante  
1
la reproducción.  
ANGULO: 1  
Presione ANGLE durante la  
Cuando no haya subtítulos  
1
reproducción para visualizar  
grabados, se visualizará “-en  
ELEGIR  
ACTIVO / INACTIVO  
TERMINAR  
:
:
la selección del ángulo.  
lugar del número de idioma.  
: SUB TITLE  
Presione  
para  
ELEGIR  
:
2
seleccionar el idioma deseado. 2  
ANGULO: 2  
Presione  
para  
Presione  
para  
seleccionar el ángulo  
seleccionar ACTIVOo  
ELEGIR  
ACTIVO / INACTIVO  
TERMINAR  
:
:
deseado.  
: SUB TITLE  
INACTIVO.”  
ELEGIR  
:
Selección de vocal para los  
discos de Karaoke [DVD/Vídeo CD]  
Cambio del idioma de la pista  
de sonido [DVD solamente]  
EI idioma de la pista de sonido seleccionado al hacer  
las fijaciones iniciales se puede cambiar por otro  
idioma diferente, si éste se encuentra disponible.  
Presione AUDIO  
Presione AUDIO durante la reproducción  
1 para visualizar la pantalla AUDIO.  
Presione  
para seleccionar el ajuste  
deseado.  
(o  
)
2
1
durante la reproducción  
para visualizar  
SONIDO en la pantalla.  
Presione  
ajustar. (DVD solamente)  
(o ) para  
ELEGIR  
:
TERMINAR : AUDIO  
ELEGIR  
TERMINAR : AUDIO  
:
Presione  
para  
DVD Karaoke (1 vocal) VOCAL ON VOCAL OFF  
DVD Karaoke (2 vocals) VOCAL V1 VOCAL V2 VOCAL V1+V2 VOCAL OFF  
2
seleccionar idioma.  
Video CD  
LR  
L
R
ELEGIR  
:
Download from Www.Somanuals.com. All TMERMaINnARuals Search And Download.  
: AUDIO  
63  
Spanish Quick Use Guide/ Guía para rápida consulta  
Utilización de un menú de títulos  
[DVD solamente]  
Utilización de un menú de DVD  
[DVD solamente]  
Algunos discos con películas, vienen con dos o más  
títulos. Por ejemplo, si el disco tiene un menú de  
títulos grabados, el botón TITLE podrá utilizarse  
para seleccionar el título de la película.  
Algunos discos DVD ofrecen un menú especial.  
Este menú incluye guías para contenidos únicos,  
audio, subtitulos, idiomas, etc. Aunque los  
contenidos y las operaciones se cambian, los  
siguientes son unos pasos básicos para el uso del  
menú.  
Presione TITLE durante la reproducción.  
Ahora se visualiza una lista de los títulos del  
disco.  
1
Presione MENU durante la reproducción.  
1
El menú de DVD introducido en el disco se  
Presione  
o las  
TITLE MENU  
2
visualiza ahora.  
teclas de números para  
seleccionar el título  
deseado.  
Dogs Castles  
Presione  
o las  
DVD MENU  
2
LDogs  
teclas de números para  
seleccionar el ítem deseado.  
Presione SET para elegir.  
1 . SUBTITLE  
2 . AUDIO  
Presione SET para elegir.  
of the world  
3 . ANGLE  
<ejemplo>  
<ejemplo>  
Ampliación de la imagen [Vídeo DVD solamente]  
Durante la reproducción de un DVD, puede ampliar partes específicas de una imagen y seleccionar la  
relación de zoom usando el botón ZOOM.  
Presione ZOOM repetidamente para cambiar el  
tamaño de la imagen como se indica a continuación:  
2da  
I Use los botones  
,
,
y
para desplazar  
la posición hacia arriba, hacia abajo, hacia la  
izquierda o hacia la derecha.  
3da  
Funcionamiento de la ejecución de MP3/WMA/JPEG  
I Ejecución MP3/WMA/JPEG (Durante el modo STOP)  
Presione para seleccionar un archivo MP3/WMA  
) o un archivo JPEG ( ), y presione SET o  
Puede utilizar esta unidad para reproducir audio de  
formato MP3/WMA/JPEG, grabado para uso personal  
con una computadora, etc., en un CD-ROM o CD-RW.  
La ejecución no podrá realizarse en algunos casos,  
debido a las condiciones de la grabación.  
4
(
/
PLAY.  
MP3/WMA  
Búsqueda hacia adelante/hacia atrás  
PresioneFF/SLOW+oREW/SLOW- durantelaejecución.  
Salto de pista hacia adelante/hacia atrás  
Presione POWER en el control remoto o DECK.  
1
Presione SKIP  
| o |  
SKIP durante la ejecución.  
Presione OPEN/CLOSE y a continuacion  
2 coloque un disco MP3/WMA/JPEG en la bandeja  
JPEG  
Búsqueda siguiente/anterior  
de discos.  
Presione SKIP  
| o |  
SKIP.  
Presione OPEN/CLOSE para cerrarla.  
Inicie la muestra-diapositiva  
Presione FF/SLOW+ o REW/SLOW-.  
Ampliar una imagen Presione ZOOM.  
Girar una imagen Presione ANGLE.  
Presione STOP para detener la operación descrita arriba.  
I Seleccione MODO DE REPRODUCCION  
(Durante el modo STOP)  
Se visualizará el MENU MP3/WMA/JPEG y la  
3
ejecución se iniciará automáticamente. (Se  
visualizará el directorio del CD.)  
<ejemplo>  
Estado de la  
REPROD  
00  
:
00  
:
00  
Contador  
Presione  
para mover el cursor a MODO DE  
para seleccionar el  
función  
Carpeta  
ROOT  
VA  
. .  
REPRODUCCION, y Presione  
MODO DE REPRODUCCIÓN deseado.  
[MODO DE REPRODUCCIÓN]  
NORMAL: Todos los archivos se reproducen sólo una vez  
REPETICION DE UNA MUSIC:  
El archivo seleccionado se reproduce repetidamente.  
REPETICION DE UN ARCHIVO:  
Los archivos que se encuentran en la carpeta  
seleccionada se reproducen repetidamente.  
REPETICION DEL DISCO:  
Todos los archivos se reproducen repetidamente.  
Presione ACTION para regresar al DVD MENU  
END  
DD CUB I C  
CTURNE  
RN  
_WALTZ  
principal  
TECHNO  
_
POPS  
AZZ  
NO  
NO  
Area de las  
carpetas  
(La carpeta  
visualizada  
actualmente se  
volverá verde)  
J
Area de  
archivos  
(El archivo/ la  
carpeta se  
visualiza con  
un cursor.)  
MODE DE REPRODUCCION:  
NORMAL  
MODO DE REPRODUCCIÓN  
:Archivo MP3  
:Carpeta  
:Archivo WMA  
:Archivo JPEG  
:Carpeta principal  
5 PRINCIPAL.  
o
r
a
y
u
d
a
l
la  
m
e
a
l
1-  
8
0
0
-2  
1
1
-
P
A
N
A
(7  
2
6
2
)
o
e
n
v
i
e
e
-m  
a
i
l
a
:
c
o
n
s
u
m
erproducts@panasonic.com
Download from Www.Somanuals.com. All Manuals Search And Download.  
64  
Configuración de los altavoces  
Presione POWER en el control remoto o el  
1
2
3
aparato.  
Presione DVD para seleccionar el modo DVD.  
AJUSTE DE ALTAVOCES  
Presione  
para  
SALIDA PARA ALTAVOCES :  
MULT I CANALES  
seleccionar AJUSTE DE  
ALTAVOCES,y  
-
TAMAÑO DEL ALTAVOZ  
BALANCE DE SALIDA  
TI EMPO ATRAZADO  
Presione SET para  
visualizar la pantalla  
AJUSTE DE ALTAVOCES.  
ELEGIR  
FIJAR  
:
: SET  
TERMINAR : ACTION  
Presione  
para seleccionar, y presione  
4
SET para fijar.  
I SALIDA PARA ALTAVOCES  
Fije el número de altavoces conectados al DECK.  
MULTI-CANALES (Predeterminado en fábrica)  
Cuando están conectados 3 o más altavoces.  
2CANALES  
Cuando están conectados 2 altavoces.  
I TAMAÑO DEL ALTAVOZ  
Se determinan las propiedades de frecuencia del  
altavoz y la existencia de los altavoces.  
FRENTE (GRANDE [predeterminado en fábrica]/  
PEQUEÑO)  
CENTRO (GRANDE [predeterminado en fábrica]/  
PEQUEÑO/NINGUNO)  
ENVOLVENTE (GRANDE [predeterminado en  
fábrica]/PEQUEÑO/NINGUNO)  
SUBWOOFER (ENCENDIDO [predeterminado en  
fábrica]/APAGADO)  
I BALANCE DE SALIDA  
Ajuste la salida de nivel de volumen para los altavoces.  
CENTRO,ENVOLVENTE(DER)/(IZQ),SUBWOOFER  
-6db ~ +6db (0db: predeterminado en fábrica)  
SEÑALPRUEBA  
El sonido de prueba es la salida en sentido de las  
manecillas del reloj.  
I TIEMPO ATRAZADO  
Configurar el tiempo atrazado. Da a la salida de  
sonido un efecto retrasado que le ofrece la ilusión de  
encontrarse en la posición de escucha ideal.  
Presione ACTION tres o cuatro veces  
para salir.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
65  
INDEX  
DECK & VCR  
A ACTION button ................................. 8, 18  
Accessories............................................ 4  
ADD/DELETE button  
(Add or Delete a Channel) ............ 8, 19  
Audio Broadcast types  
(Stereo/SAP/Mono) ............................ 26  
Audio Mode (Playback, Recording) .... 27  
Auto Operation Functions.................... 31  
Auto Shut-Off ........................................ 33  
R REC button (Record on a Tape) ..... 8, 21  
Record Tab ............................................ 6  
Remote Sensor ...................................... 9  
Remote Warning .................................. 34  
Repeat Play ......................................... 32  
Reset All Memory Functions ................. 9  
REWIND/SEARCH button ............... 8, 20  
S SAP/Hi-Fi ............................................. 27  
SEARCH  
(Index and Program End Search) ..... 30  
SLOW+/SLOW- button  
(Slow Motion Picture) .................... 8, 20  
Spanish Quick Use Guide ........... 60 ~ 65  
Specifications......................................... 7  
SPEED button .................................. 8, 21  
Still (Freeze) Picture ............................ 20  
STOP button..................................... 8, 20  
B Batteries ................................................. 4  
C Channel (SET UP CHANNEL) .......... 18  
Channel Up/Down,  
Tracking/V-Lock Button ....................6, 8  
Clock (SET CLOCK).......................... 18  
Commercial Skip ................................. 31  
Connections................................. 12 ~ 15  
Copy Your Tapes (Dubbing) ............... 35  
COUNTER RESET button ............... 8, 32  
Customer Services Directory............... 59  
T Tape Position, Tape Status ................. 34  
Timer Recording .................................. 24  
Trouble Shooting ........................... 56, 57  
TV mode button................................ 8, 28  
D DISPLAY button ............................... 8, 11  
DSS/CABLE mode button ............... 8, 28  
DST (Daylight Saving Time) ................ 19 V VCR Lock ............................................. 33  
VCR mode button ............................ 8, 28  
E EJECT button ................................... 8, 20  
VCR/TV button ................................. 8, 21  
ENTER button  
VCR/TV Selector Feature .................... 32  
(For tuning TV Channel) ................ 8, 28  
VOLUME +/- button (TV Volume) .... 8, 28  
F FAST FORWARD/SEARCH button .. 8, 20  
H Head Cleaning ...................................... 6  
WWarning and Instruction Displays ....... 55  
Weak Signal Display ........................... 33  
I Index Search ........................................ 30  
Z ZERO SEARCH button .................... 8, 32  
Indicator (Multi Function Display) ....... 11  
Initial Setup (Ready to Play) ......... 16, 17  
INPUT button ................................... 8, 35  
L Limited Warranty ........................... 58, 59  
Location of Controls  
(Remote, DECK) .......................... 8 ~ 10  
MMulti-Brand Control ....................... 28, 29  
O On-Screen Displays (VCR) ................. 11  
One Touch Recording ......................... 21  
P PAUSE/STILL button (Still Picture) .. 8, 20  
PLAY button (Playback a Tape) ...... 8, 20  
POWER button ....................................... 8  
PROG button (PROGRAM).............. 8, 24  
Program Clear, Review, Replace ....... 25  
Program End Search ........................... 30  
Q Quality Picture ....................................... 6  
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
66  
DVD  
A ACTION button ................................. 8, 49 S SEARCH button  
ANGLE button  
(Multiple Angle Viewing) ......... 8, 37, 47  
AUDIO button  
(Audio Soundtrack Language) ...... 8, 36  
Audio Output  
(Forward/Reverse Scene Search) .. 8, 23  
SKIP l or l button  
(Forward/Reverse Chapter/Track) 8, 23  
Slide-show ........................................... 46  
SLOW+/SLOW- button  
(For Selecting Audio Output) ............. 50  
Auto-Power Off Function ..................... 23  
(Slow Motion Picture) .................... 8, 23  
Speaker Output Setup ......................... 51  
Speaker Position ................................. 53  
Speaker Size Setup............................. 51  
STILL button  
(Still Picture or Pause) ................... 8, 23  
Still Mode  
(For selecting FIELDor FRAME) .. 53  
STOP button..................................... 8, 22  
SUB TITLE button  
(For selecting Subtitle Language) ... 8, 36  
S-Video Out.................................... 10, 13  
B Bonus Group (For DVD-Audio) ........... 41  
C CLEAR button ............................ 8, 39, 48  
Component Video Output .............. 10, 13  
D Delay Time Setup ................................ 52  
Disc Languages ................................... 49  
DISPLAY button  
(On-Screen Display).................... 8, 42  
DTS ...................................................... 14  
DVD-Audio ........................................... 41  
DVD Lock Ratings ............................... 48  
DVD Menu ........................................... 38  
DVD mode button ............................ 8, 28  
T Test Signal Setup ................................ 53  
TITLE button (Title Menu) ................ 8, 38  
TV Mode  
F 5.1ch Analog Audio Output ........... 15, 51  
Frame by Frame Picture ...................... 23  
Forward/Reverse Chapter/Track Skip... 23  
Forward/Reverse Scene Search .......... 23  
(For selecting the screen display style) .. 53  
2-channel speaker system .............. 15, 51  
V Video CD ............................................. 23  
VOLUME ADJUST button ................ 8, 40  
V.S.S. (Virtual Surround Sound) ..... 8, 23  
J JPEG ............................................ 45 ~ 47  
K Karaoke  
WWMA ..................................................... 45  
Z ZOOM button (Picture Zoom)..... 8, 37, 47  
(Vocal Selection for Karaoke Discs) ... 37  
L Language Code List ............................ 54  
MMENU button  
(To display DVD Menu) ................. 8, 38  
MP3 ...................................................... 45  
Multiple Angle Viewing........................ 37  
Multi-channel speaker system ...... 15, 51  
OOPEN/CLOSE button....................... 8, 22  
Optical Digital Audio Output .......... 10, 15  
Output Balance Setup ......................... 52  
P PAGE button (Still Image Skip) ....... 8, 41  
PLAY button (Play a Disc) ............... 8, 22  
Program Play (For Video CD/ CD) ...... 39  
PROGRESSIVE button .......................... 9  
Progressive Scan................................. 10  
R Random Play (For Video CD/ CD) ...... 40  
Repeat Play ......................................... 44  
Resume Function................................. 23  
RETURN button ............................... 8, 22  
Rotation................................................ 47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
67  
Panasonic Consumer Electronics Company,  
Division of Matsushita Electric Corporation of America  
One Panasonic Way Secaucus, New Jersey 07094  
Panasonic Sales Company (PSC),  
P
Printed in Indonesia  
LSQT0675A  
Division of Matsushita Electric of Puerto Rico, Inc.  
Ave. 65 de Infantería. Km. 9.5 San Gabriel Industrial Park, Carolina,  
Puerto Rico 00985  
S0303-0  
Download from Www.Somanuals.com. All Manuals Search And Download.  

MTD Snow Blower H660G User Manual
NetComm Network Router NB6Plus4 User Manual
Neuros Audio VCR MPEG 4 User Manual
Nikon Camera Accessories ED 70 300 mm f 4 560 User Manual
One for All Stereo Amplifier SV 9512 User Manual
Panasonic All in One Printer DP 8035 User Manual
Panasonic Answering Machine KT TG7861AL User Manual
Panasonic Telephone KX NT700 User Manual
Panasonic Telephone KX PW90CL User Manual
Partner Tech Lawn Mower PP51 450SM User Manual