Panasonic DVD Player DVD S533 User Manual

The illustration shows DVD-S53 for the U.S.A. and Canada.  
Operating Instructions  
DVD/CD PLAYER  
Model No.  
DVD-S53/DVD-S533  
Dear customer  
Thank you for purchasing this product. Before connecting, operating or adjusting this  
product, please read the instructions completely. Please keep this manual for future  
reference.  
MULTI-FORMAT PLAYBACK  
If you have any questions, contact 1-800-211-PANA (7262) in the U.S.A. or  
1-800-561-5505 in Canada.  
See page 5 for details  
Unless otherwise indicated, illustrations in these operating instructions  
are of DVD-S53 for the U.S.A. and Canada.  
For the U.S.A.:The warranty can be found on page 26.  
For Canada:The warranty can be found on page 27.  
La referencia rápida en español se puede encontrar en la página 28 a  
31.  
For the U.S.A. and Canada  
Example:  
As an ENERGY STAR® Partner1,  
Panasonic has determined that this  
product meets the ENERGY STAR®  
guidelines for energy efficiency.  
Region number  
The player plays DVD-Video marked with  
labels containing the region number “1” or  
ALL”.  
1
2
1
ALL  
4
1For Canada only: The word “Participant” is used in place of  
the word “Partner”.  
RQTC0128-2P  
P
PC  
PX  
Download from Www.Somanuals.com. All Manuals Search And Download.  
THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA  
THE FOLLOWING APPLIES ONLY IN THE U.S.A.  
CAUTION!  
FCC Note:  
THIS PRODUCT UTILIZES A LASER.  
USE OF CONTROLS OR ADJUSTMENTS OR  
PERFORMANCE OF PROCEDURES OTHER THAN  
THOSE SPECIFIED HEREIN MAY RESULT IN  
HAZARDOUS RADIATION EXPOSURE.  
DO NOT OPEN COVERS AND DO NOT REPAIR  
YOURSELF. REFER SERVICING TO QUALIFIED  
PERSONNEL.  
This equipment has been tested and found to comply with  
the limits for a Class B digital device, pursuant to Part 15  
of the FCC Rules.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
These limits are designed to provide reasonable  
protection against harmful interference in a residential  
installation. This equipment generates, uses and can  
radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause  
harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in  
a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on,  
the user is encouraged to try to correct the interference  
by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver.  
Connect the equipment into an outlet on a circuit  
different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV  
technician for help.  
CAUTION: TO REDUCE THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE SCREWS.  
NO USER-SERVICEABLE PARTS  
INSIDE.  
REFER SERVICING TO QUALIFIED  
SERVICE PERSONNEL.  
WARNING:  
TO REDUCE THE RISK OF FIRE,  
ELECTRIC SHOCK OR PRODUCT  
DAMAGE,  
The lightning flash with arrowhead symbol,  
within an equilateral triangle, is intended to  
alert the user to the presence of uninsulated  
“dangerous voltage” within the product’s  
enclosure that may be of sufficient magnitude  
to constitute a risk of electric shock to persons.  
• DO NOT EXPOSE THIS APPARATUS  
TO RAIN, MOISTURE, DRIPPING OR  
SPLASHING AND THAT NO OBJECTS  
FILLED WITH LIQUIDS, SUCH AS  
VASES, SHALL BE PLACED ON THE  
APPARATUS.  
The exclamation point within an equilateral  
triangle is intended to alert the user to  
the presence of important operating and  
maintenance (servicing) instructions in the  
literature accompanying the appliance.  
• USE ONLY THE RECOMMENDED  
ACCESSORIES.  
• DO NOT REMOVE THE COVER  
(OR BACK);THERE ARE NO USER  
SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED  
SERVICE PERSONNEL.  
Any unauthorized changes or modifications to this  
equipment would void the user’s authority to operate this  
device.  
CAUTION!  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and  
(2) this device must accept any interference received,  
including interference that may cause undesired  
operation.  
DO NOT INSTALL OR PLACE THIS UNIT IN A  
BOOKCASE, BUILT-IN CABINET OR IN ANOTHER  
CONFINED SPACE. ENSURE THE UNIT IS WELL  
VENTILATED.TO PREVENT RISK OF ELECTRIC  
SHOCK OR FIRE HAZARD DUE TO OVERHEATING,  
ENSURE THAT CURTAINS AND ANY OTHER  
MATERIALS DO NOT OBSTRUCT THE VENTILATION  
VENTS.  
The socket outlet shall be installed near the equipment  
and easily accessible. The mains plug of the power  
supply cord shall remain readily operable. To completely  
disconnect this apparatus from the AC Mains, disconnect  
the power supply cord plug from AC receptacle.  
Responsible Party:  
Panasonic Corporation of North America  
One Panasonic Way  
Secaucus, NJ 07094  
CAUTION!  
Support Contact:  
Panasonic Consumer Electronics Company  
Telephone No.: 1-800-211-7262  
DO NOT INSTALL OR PLACE THIS UNIT IN A  
BOOKCASE, BUILT-IN CABINET OR IN ANOTHER  
CONFINED SPACE. ENSURE THE UNIT IS  
WELL VENTILATED.TO PREVENT RISK OF  
ELECTRIC SHOCK OR FIRE HAZARD DUE TO  
OVERHEATING, ENSURE THAT CURTAINS AND  
ANY OTHER MATERIALS DO NOT OBSTRUCT THE  
VENTILATION VENTS.  
Except for U.S.A. and Canada  
DO NOT OBSTRUCT THE UNIT’S VENTILATION  
OPENINGS WITH NEWSPAPERS,TABLECLOTHS,  
CURTAINS, AND SIMILAR ITEMS.  
DO NOT PLACE SOURCES OF NAKED FLAMES,  
SUCH AS LIGHTED CANDLES, ON THE UNIT.  
DISPOSE OF BATTERIES IN AN  
(Inside of  
product)  
ENVIRONMENTALLY FRIENDLY MANNER.  
3
(Back of product)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below.  
Keep these operating instructions handy for future reference.  
1)  
2)  
3)  
4)  
5)  
6)  
7)  
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
10) Protect the power cord from being walked on or pinched particularly at plugs,  
convenience receptacles, and the point where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with the cart, stand, tripod, bracket, or table specified  
by the manufacturer, or sold with the apparatus. When a  
cart is used, use caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
Follow all instructions.  
Do not use this apparatus near water.  
Clean only with dry cloth.  
13) Unplug this apparatus during lightning storms or when unused for long periods  
of time.  
Do not block any ventilation openings. Install in accordance with the  
manufacturer’s instructions.  
14) Refer all servicing to qualified service personnel. Servicing is required when the  
apparatus has been damaged in any way, such as power-supply cord or plug is  
damaged, liquid has been spilled or objects have fallen into the apparatus, the  
apparatus has been exposed to rain or moisture, does not operate normally, or  
has been dropped.  
8)  
9)  
Do not install near any heat sources such as radiators, heat registers, stoves, or  
other apparatus (including amplifiers) that produce heat.  
Do not defeat the safety purpose of the polarized or grounding-type plug. A  
polarized plug has two blades with one wider than the other. A grounding-type  
plug has two blades and a third grounding prong. The wide blade or the third  
prong are provided for your safety. If the provided plug does not fit into your outlet,  
consult an electrician for replacement of the obsolete outlet.  
Product service  
1. Damage requiring service—The unit should be serviced by qualified service  
personnel if:  
Product information  
For product information or assistance with product operation:  
(a) The AC power supply cord or AC adaptor has been damaged; or  
(b) Objects or liquids have gotten into the unit; or  
(c) The unit has been exposed to rain; or  
In the U.S.A., refer to the “Customer Services Directory” on page 26.  
(d) The unit does not operate normally or exhibits a marked change in performance;  
or  
In Canada, contact the Panasonic Canada Inc. Customer Care Centre at  
closest to you.  
(e) The unit has been dropped or the cabinet damaged.  
2. Servicing—Do not attempt to service the unit beyond that described in these  
operating instructions. Refer all other servicing to authorized servicing personnel.  
3. Replacement parts—When parts need replacing ensure the servicer uses parts  
specified by the manufacturer or parts that have the same characteristics as the  
original parts. Unauthorized substitutes may result in fire, electric shock, or other  
hazards.  
4. Safety check—After repairs or service, ask the servicer to perform safety checks  
to confirm that the unit is in proper working condition.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Discs that can be played  
Commercial discs  
Recorded discs ( : Available, : Not available)  
Disc  
Disc  
Logo  
Indicated in these  
instructions by  
Recorded on a DVD  
video recorder, etc.  
Remarks  
Recorded on a personal computer, etc.  
6
Finalizing  
2
4
5
DVD-Video  
MP3  
JPEG  
MPEG4 DivX  
DVD-V  
DVD-VR  
WMA  
Logo  
DVD-RAM  
High quality movie  
and music discs  
DVD-V  
Not necessary  
Necessary  
Video CD  
CD  
Including SVCD  
(Conforming to  
IEC62107)  
DVD-R/RW  
VCD  
CD  
Music discs  
Discs that cannot be played  
Blu-ray, HD DVD, DVD-Audio, Version 1.0 of DVD-RW, DVD-ROM, CD-  
ROM, CDV, CD-G, SACD, Photo CD, DVD-RAM that cannot be removed  
from their cartridge, 2.6-GB and 5.2-GB DVD-RAM, PAL discs and “Chaoji  
VCD” available on the market including CVD, DVCD and SVCD that do  
not conform to IEC62107.  
DVD-R DL  
Necessary  
Playing DVDs and Video CDs  
3
4R/4RW  
Necessary  
Necessary  
(
)
The producer of these discs can control how they are played so you  
may not always be able to control play as described in these operating  
instructions (for example if the play time is not displayed or if a Video CD  
has menus).  
3
)
4R DL  
(
1
7
CD-R/RW  
Necessary  
Read the disc’s instructions carefully.  
It may not be possible to play the above discs in all cases due to the type of discs, the condition of  
the recording, the recording method and how the files were created (page 6, Tips for making data  
discs).  
Handling precautions  
Do not attach labels or stickers to discs (This may cause disc warping,  
rendering it unusable).  
Do not write on the label side with a ball-point pen or other writing  
instrument.  
Do not use record cleaning sprays, benzine, thinner, static electricity  
prevention liquids or any other solvent.  
1 This unit can also play CD-R/RW recorded with CD-DA or Video CD format.  
2 Discs recorded on DVD video recorders or DVD video cameras using DVD-Video Format.  
3 Recorded using a format different from DVD-Video Format, therefore some functions cannot be  
used.  
4 Discs recorded on DVD video recorders or DVD video cameras, etc. using Version 1.1 of the Video  
Recording Format (a unified video recording standard).  
Do not use scratch-proof protectors or covers.  
Do not use the following discs:  
– Discs with exposed adhesive from removed stickers or labels (rented  
discs etc.).  
5 Plays all versions of DivX® video (including DivX®6) with standard playback of DivX® media files.  
Certified to the DivX Home Theater Profile. GMC (Global Motion Compensation) is not supported.  
6 A process that allows play on compatible equipment. To play a disc that is displayed as “Necessary”  
on this unit, the disc must first be finalized on the device it was recorded on.  
7 Closing the session will also work.  
– Discs that are badly warped or cracked.  
– Irregularly shaped discs, such as heart shapes.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Discs that can be played  
Naming folders and files  
(Files are treated as content and folders are treated as  
groups on this unit.)  
At the time of recording, prefix folder and file names. This  
should be with numbers that have an equal number of  
digits, and should be done in the order you want to play  
them (this may not work at times).  
Tips for making data discs  
e.g. MP3  
root  
Format Disc  
Extension Reference  
group  
You cannot play WMA files that are copy protected.  
This unit is not compatible with Multiple Bit Rate  
(MBR: a file that contains the same content  
encoded at several different bit rates).  
“.WMA”  
“.wma”  
WMA  
MP3  
CD-R/RW  
track  
track  
track  
Sampling frequency:  
DVD-RAM, DVD-R/RW:  
11.02, 12, 22.05, 24, 44.1, and 48 kHz  
CD-R/RW:  
8, 11.02, 12, 16, 22.05, 24, 32, 44.1, and 48 kHz  
This unit is not compatible with ID3 tags.  
DVD-RAM  
group  
Discs must conform to UDF 2.0.  
DVD-RAM “.MP3”  
DVD-R/RW “.mp3”  
CD-R/RW  
CD-R/RW  
track  
track  
track  
track  
Discs must conform to ISO9660 level 1 or 2 (except for  
extended formats).  
This unit is compatible with multi-session but if there  
are a lot of sessions it takes more time for play to start.  
Keep the number of sessions to a minimum to avoid  
this.  
group  
JPEG files taken on a digital camera that conforms  
to DCF Standard Version 1.0 are displayed.  
– Files that have been altered, edited or saved  
with computer picture editing software may not  
be displayed.  
This unit cannot display moving pictures,  
MOTION JPEG and other such formats, still  
pictures other than JPEG (e.g. TIFF) or play  
pictures with attached audio.  
You can play MPEG4 data [conforming to SD  
VIDEO specifications (ASF standard)/MPEG4  
(Simple Profile) video system/G.726 audio  
system] recorded with the Panasonic SD multi  
cameras or DVD video recorders with this unit.  
The recording date may differ from that of the  
actual date.  
track  
track  
track  
“.JPG”  
“.jpg”  
“.JPEG”  
“.jpeg”  
DVD-RAM  
DVD-R/RW  
CD-R/RW  
DVD-R/RW  
JPEG  
Discs must conform to UDF bridge (UDF 1.02/ISO9660).  
This unit is not compatible with multi-session. The default session only is played.  
There may be differences in the display order on the menu screen and computer screen.  
This unit cannot play files recorded using packet write.  
Note about using a DualDisc  
The digital audio content side of a DualDisc does not meet the technical specifications  
of the Compact Disc Digital Audio (CD-DA) format so play may not be possible.  
DVD-RAM  
DVD-R/RW  
CD-R/RW  
“.ASF”  
“.asf”  
MPEG4  
Plays all versions of DivX video (including  
DivX® 6) [DivX video system/MP3, Dolby Digital  
or MPEG audio system] with standard playback  
of DivX® media files. Functions added with DivX  
Ultra are not supported.  
GMC (Global Motion Compensation) is not  
supported.  
DivX files greater than 2GB or have no index may  
not play properly on this unit.  
This unit supports all resolutions up to maximum  
of 720 x 480.  
Maintenance  
Clean this unit with a soft, dry cloth  
Never use alcohol, paint thinner or benzine to clean this unit.  
Before using chemically treated cloth, read the instructions that came with the cloth  
carefully.  
“.DIVX”  
“.divx”  
“.AVI”  
“.avi”  
DVD-RAM  
DVD-R/RW  
CD-R/RW  
DivX  
Cleaning of the lens is generally not necessary although this depends on the  
operating environment.  
Do not use commercially available lens cleaners as they may cause malfunction.  
Clean discs  
Wipe with a damp cloth and then wipe dry.  
You can select up to 8 types of audio and  
subtitles on this unit.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEP 1 Connection  
Connection to a television  
Do not place the unit on amplifiers or equipment that may become hot. The heat can damage the unit.  
Do not connect through the video cassette recorder. Due to copy guard protection, the picture may not display properly.  
Turn off all equipment before connection and read the appropriate operating instructions.  
Connect the terminals of the same color.  
Television  
With VIDEO IN or S VIDEO IN  
With COMPONENT VIDEO IN  
AUDIO IN  
COMPONENT  
VIDEO IN  
AUDIO IN  
VIDEO  
IN  
S VIDEO  
IN  
R
L
R
L
S video cable  
Video cables  
Not used  
Audio/video cable  
(included)  
Audio/video  
cable  
(included)  
Back of the unit  
Select “DARKER” from the “BLACK LEVEL”  
(page 19, “VIDEO” menu).  
To enjoy progressive video  
When using this connection, the audio cable  
(red and white plugs) should also be connected.  
Connect to a progressive output compatible television.  
You can connect the audio cable to the 2-channel  
audio input terminals of an analog amplifier or  
system component to enjoy stereo sound.  
Set “VIDEO PRIORITY” to “OFF” (page 20, “HDMI” menu).  
Set “VIDEO OUT (I/P)” to “PROGRESSIVE”, then follow the  
instructions on the menu screen (page 19, “VIDEO” menu).  
All Panasonic televisions with 480p input connectors are compatible.  
Consult the manufacturer if you have another brand of television.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEP 1 Connection  
Enjoying higher quality audio and video (HDMI connection) (Page 25, Glossary)  
By connecting to an HDMI compatible high-definition television, video recordings can be converted to, and output as, high-definition video (1080p,1080i).  
You can also enjoy surround sound by connecting to an HDMI compatible amplifier with multi-channel output terminals.  
With HDMI compatible television  
With HDMI compatible television  
and amplifier  
With HDMI compatible amplifier  
To enjoy digital high-definition video and high  
quality audio with a single cable.  
You can enjoy surround sound by connecting  
an amplifier with COAXIAL terminal  
(page 9).  
You can still enjoy surround sound when your television is not HDMI  
compatible by connecting an HDMI compatible amplifier.  
To enjoy digital surround sound in addition to  
digital high-definition video.  
Television  
VIDEO IN  
Television  
HDMI IN  
2
Not used  
Television  
HDMI IN  
1
Multi-channel speakers  
HDMI cable  
Multi-channel speakers  
1
HDMI IN  
Amplifier  
Audio/video  
cable (included)  
HDMI OUT  
HDMI IN  
HDMI cable  
Amplifier  
HDMI cable  
2
Not used  
HDMI cable  
Back of the unit  
Back of the unit  
Back of the unit  
Set “AUDIO OUT” to “ON”. When you connect to a television  
through the COMPONENT VIDEO terminal only, set “VIDEO  
PRIORITY” to “OFF”, too (page 20, “HDMI” menu).  
Set “VIDEO PRIORITY” to “ON” and “AUDIO  
OUT” to “ON” (page 20, “HDMI” menu).  
Set “VIDEO PRIORITY” to “ON” and “AUDIO  
OUT” to “ON” (page 20, “HDMI” menu).  
1
DVD-V  
Audio will be output in 2 channels when output as PCM. Change “DOLBY DIGITALand “DTS” ( page 20, “AUDIO” menu).  
2 You can also use the S VIDEO and COMPONENT VIDEO terminals.  
To enjoy high-definition video, connect to an HDMI compatible high-definition television and set “VIDEO FORMAT” (page 18, On-Screen Menu 4).  
For stable operation and preventing deterioration of video quality, please purchase an HDMI cable 5.0 m (16 2/5 feet) or less in length with the HDMI logo.  
It is compatible with the EZ SyncTM “HDAVI ControlTM” (page 24).  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Enjoying surround sound  
Connect the AC power supply cord last  
COAXIAL IN  
Amplifier with a built-in decoder or a  
decoder-amplifier combination  
AC power supply cord (included)  
To household AC outlet  
Coaxial cable  
You cannot use DTS Digital Surround  
decoders not suited to DVD.  
AC IN  
Conserving power  
This unit consumes a small amount of power, even when it is turned off (1 W). To save  
power when the unit is not to be used for a long time, unplug it from the household AC  
outlet.  
Set “AUDIO OUT” to “OFF”  
(page 20, “HDMI” menu), and change  
“PCM OUTPUT”, “DOLBY DIGITALand  
“DTS” (page 20, “AUDIO” menu).  
For areas except the U.S.A. and Canada  
If the power plug does not fit your AC outlet, use the  
power plug adaptor (included). If it still doesn’t fit,  
contact an electrical parts distributor for assistance.  
Back of the unit  
STEP 2 The remote control  
Batteries  
Mishandling of batteries can cause electrolyte leakage which  
can damage items the fluid contacts and may cause a fire.  
Remove if the remote control is not going to be used for a long  
period of time. Store in a cool, dark place.  
Insert so the poles (4 and 3) match those in the remote  
control.  
Do not use rechargeable type batteries.  
R6/LR6, AA  
Do not:  
Use  
mix old and new batteries.  
use different types at the same time.  
heat or expose to flame.  
take apart or short circuit.  
attempt to recharge alkaline or manganese batteries.  
use batteries if the covering has been peeled off.  
Aim at the remote control sensor (page 10), avoiding  
obstacles, at a maximum range of 7 m (23 feet) directly in front  
of the unit.  
STEP 3 QUICK SETUP  
Turn on the television and select the appropriate video input on the television.  
Select  
1
2
3
4
5
Register  
Power on  
Shows QUICK  
SETUP screen.  
Press to finish  
QUICK SETUP.  
Follow the message and  
make the settings.  
Press to exit.  
To change these settings later, select “QUICK SETUP” (page 20, “OTHERS” menu).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
Basic play  
Power ON.  
Open the disc tray.  
Remote control sensor  
POWER  
OPEN/CLOSE  
POWER  
OPEN/CLOSE  
Load the disc.  
Start play.  
Load double-sided discs so the  
label for the side you want to  
play is facing up.  
Stop  
(during play)  
Search  
Skip  
(during pause)  
Slow-motion  
Press [u i] to skip titles, chapters, tracks, etc.  
Up to 5 steps  
DVD-VR  
Can also skip to the markers.  
Press [q] (PLAY) to restart play.  
VCD  
Slow-motion: Forward direction only.  
Slow-motion: Does not work.  
MPEG4 DivX  
Stop  
The position is memorized when “RESUME STOP” is  
displayed on your television screen.  
Pause  
Press [q] (PLAY) to resume. (Resume play)  
Press [g] to clear the position.  
Press [q] (PLAY) to restart play.  
Note  
Standby/on switch (8)  
Press to switch the unit from on to standby mode or vice versa. In standby mode, the  
unit is still consuming a small amount of power.  
DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press [g]  
when you finish to preserve the unit’s motor and your television screen.  
To play  
(page 20, “OTHERS” menu).  
Total title number may not be displayed properly on 4R/4RW.  
MP3  
JPEG  
contents on DVD-RAM, set “DVD-VR/DATA” to “DATA”  
or  
If you are experiencing problems, refer to “Troubleshooting guide” (pages 21 to 23).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Frame-by-frame  
(during pause)  
DVD-VR VCD  
forward direction only  
DVD-VR DVD-V  
VCD  
Select  
Return to  
previous screen  
On-screen item  
select  
Register  
DVD-V  
Shows a disc top menu.  
DVD-VR  
Plays the programs (page 13).  
DVD-V  
Disc menu  
Shows a disc menu.  
DVD-VR  
Plays a playlist (page 13).  
VCD  
with playback control  
Shows a disc menu.  
DVD-V DVD-VR CD VCD  
1
4
7
2
5
8
0
3
6
9
e.g. To select 12: [ 10] [1] [2]  
Enter number  
MP3 JPEG MPEG4 DivX  
WMA  
e.g. To select 123: [ 10] [1] [2] [3] [ENTER]  
Number display  
Time display  
Main unit display  
Information  
JPEG  
screen  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the play sequences  
(up to 30 items)  
Program play  
Random play  
(except  
)
DVD-VR  
(except  
)
DVD-VR  
WMA MP3 JPEG MPEG4 DivX  
Discs that contain both video (DivX/MPEG4) and other format (WMA/MP3/JPEG)  
contents only  
WMA MP3 JPEG MPEG4 DivX  
1.  
Discs that contain both video (DivX/MPEG4) and other format (WMA/MP3/JPEG)  
contents only  
1.  
While the “PLAYBACK MENU” is displayed  
While the “PLAYBACK MENU” is displayed  
PLAYBACK MENU  
PLAYBACK MENU  
Press [e r] to select  
Press [e r] to select  
“AUDIO/PICTURE” or  
“VIDEO” and press  
AUDIO/PICTURE  
MP3, WMA, JPEG  
AUDIO/PICTURE  
VIDEO  
MP3, WMA, JPEG  
DivX, MPEG4  
“AUDIO/PICTURE” or  
“VIDEO” and press  
[ENTER].  
VIDEO  
DivX, MPEG4  
[ENTER].  
e.g.  
DVD-V  
e.g. DVD-V  
DVD-V PROGRAM  
SELECT TITLE  
2. While stopped, press [PLAY MODE] several  
  
2. While stopped, press [PLAY MODE] several  
  
TITLE CHAP.  
DVD-V RANDOM  
SELECT TITLE  
times to select “  
RANDOM”.  
times to select “  
PROGRAM”.  
1
2
TITLE  
TITLE  
TITLE  
TITLE  
1
2
3
4
When playing a disc with both MP3 and JPEG  
recorded, select “MUSIC RANDOM” for MP3 or  
“PICTURE RANDOM” for JPEG pictures.  
TITLE  
TITLE  
TITLE  
1
2
3
When playing a disc with both MP3 and JPEG  
recorded, select “MUSIC PROGRAM” for MP3  
or “PICTURE PROGRAM” for JPEG pictures.  
You cannot set both “MUSIC PROGRAM” and  
“PICTURE PROGRAM”.  
3
4
5
6
7
8
9
10  
PRESS PLAY TO START  
CLEAR ALL  
START: PLAY  
DVD-V PROGRAM  
SELECT CHAPTER  
3. Press [e r] to select an item and press  
MP3 JPEG MPEG4  
3. WMA  
DivX  
TITLE CHAP.  
[ENTER].  
Only when the disc has a group (folder)  
1
2
1
1
1
1
2
3
ALL  
CHAP.  
CHAP.  
CHAP.  
1
2
3
Repeat this step to program other items.  
To select all items in a disc, title, or group, select  
“ALLand press [ENTER].  
3
Press [e r] to select a group and press [ENTER].  
4
5
” will be displayed next to the selected groups.  
6
Press [ENTER] again to clear.  
7
Press [ANGLE/PAGE] to skip page by page.  
Press [RETURN] to return to the previous menu.  
8
To select multiple groups, repeat this step.  
Press [ANGLE/PAGE] to skip page by page.  
To select all items in a disc, select “ALL.  
9
10  
CLEAR ALL  
START: PLAY  
4. Press [q] (PLAY) to start play.  
DVD-V  
Clearing the program  
Only when the disc has multiple titles  
Press [e r] to select a title and press [ENTER].  
• “ ” will be displayed next to the selected title.  
Press [q] and then press [e r] to select the item and press [CANCEL].  
Clearing the whole program  
Press [q] several times to select “CLEAR ALLand press [ENTER]. The whole program  
is also cleared when the unit is turned off or the disc tray is opened.  
4. Press [q] (PLAY) to start play.  
To exit program mode, press [PLAY MODE] several times.  
To exit random mode, press [PLAY MODE] several times.  
Note  
(For Program play and Random play) While playing SVCD, press [g] will not memorize the position.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using navigation menus  
Playing audio (WMA/MP3), picture (JPEG) and video (DivX/MPEG4) discs  
WMA MP3 JPEG MPEG4 DivX  
Discs that contain both video (DivX/MPEG4) and other  
format (WMA/MP3/JPEG) contents only  
1.  
2.  
Select the picture in thumbnails menu  
PLAYBACK MENU  
JPEG  
AUDIO/PICTURE  
VIDEO  
MP3, WMA, JPEG  
DivX, MPEG4  
1. While pictures are being displayed, press [TOP  
MENU] to display the thumbnails.  
2.To select a picture in a group  
Press [e r w q] to select the picture and press [ENTER].  
While the “PLAYBACK MENU” is displayed  
Press [e r] to select “AUDIO/PICTURE” or  
“VIDEO” and press [ENTER].  
Press [i] to skip forward page by page.  
Press [u] to skip backward page by page.  
While the menu is displayed  
Press [e r w q] to select an item and press [ENTER].  
To select a picture in other groups  
1. Press [e] to select the group name.  
2. Press [w q] to select the group and press [ENTER].  
3. Press [e r w q] to select the picture and press [ENTER].  
Repeat this step if there are multiple layers.  
DATA-DISC  
ROOT  
DATA-DISC  
ROOT  
Group (Folder)  
01 Ashley at Prom  
Lady Starfish  
Life on Jupiter  
Soccer  
Group (Folder)  
01 Ashley at Prom  
02 City Penguin  
03 Neanderthal  
04 Cartoons  
05 Trilobites  
06 White Dwarf  
07 Discovery  
Formula one  
Starperson  
02 City Penguin  
03 Neanderthal  
04 Cartoons  
05 Trilobites  
06 White Dwarf  
07 Discovery  
08 DivX  
Group and content  
Starperson  
Group name  
number  
MP3/WMA  
content (File)  
Soccer  
Baseball  
MPEG4/DivX  
content (File)  
JPEG content (File)  
NO.4  
G
1/ 2 : C  
1/  
9
Baseball  
ROOT  
Formula one  
Files are treated as contents and folders are treated as groups in these instructions.  
Press [ANGLE/PAGE] to skip page by page.  
Press [RETURN] to go back to previous screen.  
Press [MENU] to display/exit the screen.  
The video content is distorted according to the recorded method to the discs. This unit cannot play these  
kinds of discs normally.  
DivX  
DVD-VR  
Playing programs/playlists  
Titles appear only if they have been entered.  
You cannot edit playlists and titles.  
(Only when the disc contains a playlist)  
Playing the programs  
Playing the playlist  
PG  
1ꢀ  
DATE  
01/25  
LENGTH TITLE  
PL  
1ꢀ  
DATE  
01/10  
LENGTH TITLE  
1. While stopped, press [DIRECT NAVIGATOR].  
1. While stopped, press [PLAY LIST].  
MOVIE PICTURE  
PLAYBACK  
MOVIE PICTURE  
PLAYBACK  
0:55:31  
0:30:11  
2. Press [e r] to select the program.  
04:31  
2. Press [e r] to select the play list.  
10:00  
Press [ ] to skip page by page.  
w q  
01/25  
05:20  
STILL PICTURE  
PLAYBACK  
01/15  
STILL PICTURE  
PLAYBACK  
Press [ ] to skip page by page.  
w q  
2ꢀ  
0:28:20  
2ꢀ  
0:55:30  
08:00  
3. Press [ENTER].  
3. Press [ENTER].  
01/28  
10:00  
HYBRID PICTURE  
PLAYBACK  
01/18  
08:01  
HYBRID PICTURE  
PLAYBACK  
3ꢀ  
0:36:00  
3ꢀ  
0:55:31  
01/29  
PARTIAL PLAYBA  
CK  
01/19  
PARTIAL PLAYBA  
CK  
4ꢀ  
0:48:55  
4ꢀ  
0:55:29  
Program menu  
Playlist menu  
11:15  
07:59  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Convenient functions  
Displaying current playback condition  
(Quick On Screen Display)  
(Discs with pictures)  
Changing picture mode  
Press [QUICK OSD].  
Press [PICTURE MODE] to select the picture quality  
for movie viewing.  
NORMAL: Normal images.  
CINEMA1: Mellows images and enhances detail in dark scenes.  
CINEMA2: Sharpens images and enhances detail in dark scenes.  
DYNAMIC: Enhances the contrast for powerful images.  
ANIMATION: Suitable for animation.  
NORMAL  
Press [e r] to change  
current/elapsed play time.  
e.g. CD  
Current playback number  
Play mode  
---: Normal Play  
PGM: Program Play  
RND: Random Play  
T
1
TIME  
0 : 05  
SOFT SKIN: Softens the skin of people in the images.  
Current position  
Playback condition  
DVD-V DVD-VR  
Changing play speed  
To exit the screen, press [QUICK OSD].  
(Only when the elapsed play time can be displayed)  
During play, press [PLAY SPEED].  
Enjoying advanced surround  
Motion pictures with 2 or more channels  
1.4  
Press [e r] to change play speed  
– from “ 0.6” to “ 1.4” (in 0.1 units)  
Enjoy a surround-like effect when using 2 front speakers.  
Press [ADVANCED SURROUND] to select  
“A. SURROUND1”, “A. SURROUND2”, “A. SURROUND3” or “OFF”.  
A. SURROUND1  
Press [q] (PLAY) to return to the normal play.  
After you change the speed  
– Advanced surround (left) does not work.  
– Digital audio output switches to PCM 2ch.  
This may not work depending on the disc’s recording.  
OFF  
A. SURROUND1  
A. SURROUND3  
A. SURROUND1: Light effect  
A. SURROUND2  
A. SURROUND2: Medium effect  
A. SURROUND3: Strong effect  
OFF: Off  
(Only when the elapsed play time can be displayed)  
Quick replay  
DVD-V DVD-VR WMA MP3 VCD CD  
Press [QUICK REPLAY] to skip back about 10 seconds.  
When using discs recorded with surround sound, sound seems to come from  
speakers on either side of you.  
Optimum seating position is 3 to 4 times the distance between the front left and right  
speakers or the width of the television if using the television’s speakers.  
Do not use in combination with surround effects on other equipment.  
The settings remain even when the unit is turned off or the disc tray is opened.  
Turn off if sound is distorted.  
This may not work depending on the disc’s recording.  
(Discs with subtitles)  
Changing subtitles  
e.g.  
Press [SUBTITLE] to select the subtitle language.  
DVD-V  
On 4R/4RW, a subtitle number may be shown for subtitles  
that are not displayed.  
This may not work depending on the disc’s recording.  
1: ENG  
Repeat play  
(Only when the elapsed play time can be displayed.  
JPEG : you can use even if there is no elapsed time display.)  
e.g.  
DVD-V  
Press [REPEAT] to select an item to be repeated.  
To cancel, press [REPEAT] to select “OFF”.  
CHAP.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing soundtracks  
(Discs with pictures)  
Transfer mode  
DVD-V DivX  
(with multiple soundtracks)  
With COMPONENT VIDEO OUT connection  
DVD-VR VCD  
AUTO1  
If you have set “VIDEO OUT (I/P)” to “PROGRESSIVE”  
(page 19, “VIDEO” menu).  
Press [TRANSFER MODE] to select the method of conversion for progressive  
output to suit the type of material.  
DVD-V DivX  
e.g.  
DivX  
Press [AUDIO] to select the soundtrack.  
1: MP3 160kbps 44.1kHz 2ch  
DVD-VR VCD  
You can use this button to select “L, “R”, “L4R” or “L R”.  
When the tray is opened, the setting will return to AUTO1.  
AUTO1 (normal): Automatically detects the film and video content, and appropriately  
converts it.  
AUTO2: In addition to AUTO1, automatically detects film contents with different frame  
Dialogue enhancer  
DVD-V (Dolby Digital, DTS, 3-channel or over, with the dialogue  
rates and appropriately converts it.  
VIDEO: Select when using AUTO1 and AUTO2, and the content is distorted.  
recorded in the center channel)  
DivX  
(Dolby Digital, 3-channel or over, with the dialogue  
With HDMI AV OUT connection  
recorded in the center channel)  
If you have set “VIDEO FORMAT” to “480p”, “720p”, “1080p”, or “1080i”  
(page 18, On-Screen Menu 4).  
Select between AUTO1, AUTO2, and VIDEO for the method of conversion for  
progressive output.  
To make the dialogue in movies easier to hear  
Press [DIALOGUE ENHANCER] to select “ON”.  
To cancel, press [DIALOGUE ENHANCER] to select “OFF”.  
ON  
The settings remain even when the unit is turned off or the disc tray is opened.  
DVD-V DVD-VR VCD JPEG MPEG4 DivX  
Zoom  
Skipping about one minute forward  
DVD-V DVD-VR  
e.g. VCD  
1. JPEG Press [ ].  
h
NORMAL  
2. Press [ZOOM] to select the zoom ratio.  
Convenient when you want to skip commercials etc.  
During play, press [CM SKIP].  
(
)
DVD-V DVD-VR VCD only  
NORMAL AUTO  
X 2 X 4  
This may not work depending on the play position.  
Does not work:  
– with still picture part.  
NORMAL: Displayed in the size used for recording.  
AUTO: Automatically zooms in and adjusts the size of images with upper and lower  
black bands.  
X 2: 2X zoom  
DVD-VR  
– when playing a playlist.  
X 4: 4X zoom  
DVD-V (with multiple angles)  
Angle select  
Zoom ratio will return to “NORMALwhile stopped, “RESUME STOP”, or when the  
disc tray is opened.  
Still picture rotation JPEG  
e.g.  
DVD-V  
Press [ANGLE/PAGE] to select the angle.  
Reducing noise in pictures  
During pause,  
JPEG  
1
Press [ANGLE/PAGE] to rotate the still picture.  
Smoothes block noise and reduces the smudging that appears  
around contrasting sections of the picture.  
1
Press [DNR] to select “OFF”, “1”, “2”, or “3”.  
1: Light effect  
2: Medium effect  
3: Strong effect  
OFF: Off  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using On-Screen Menus  
1
2
3
4
Select  
Select  
1
4
7
2
5
8
0
3
6
9
Press.  
Each time you press the button:  
Register  
Register  
On-Screen Menu 1  
On-Screen Menu 2  
On-Screen Menu 3  
(Disc/Play)  
(Video)  
Press to exit.  
Select the item.  
Make the settings.  
(Audio)  
On-Screen Menu 4 (HDMI)  
Exit  
Note  
Press [FUNCTIONS] will display only “On-Screen Menu 4” during “nodISC” or when the disc tray is opened.  
Items shown differ depending on the type of software.  
On-Screen Menu 1 (Disc/Play)  
e.g.  
DVD-V  
PG SEARCH, PL SEARCH, To start from a specific item  
TITLE SEARCH, CHAPTER  
SEARCH,TRACK SEARCH,  
Press [e r] to select and press [ENTER], or, press the numbered buttons.  
This does not work when using playback control (page 25, Glossary).  
VCD  
T9 C99 CONTENT SEARCH  
AUDIO  
(page 15, Changing soundtracks)  
PLAY SPEED  
(page 14, Changing play speed)  
REPEAT MODE  
(page 14, Repeat play)  
A-B Repeat (To repeat a specified section)  
Except still picture on  
JPEG DivX MPEG4  
Press [ENTER] at the starting and ending points.  
Select “OFF” to cancel.  
SUBTITLE  
ANGLE  
(page 14, Changing subtitles)  
(page 15, Angle select)  
JPEG  
OFF  
DATE DISPLAY  
ROTATION  
Displays the photograph date  
ON  
(page 15, Still picture rotation)  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen Menu 2 (Video)  
PICTURE MODE  
(page 14, Changing picture mode)  
ZOOM  
(page 15, Zoom)  
DNR  
(page 15, Reducing noise in pictures)  
(page 15, Transfer mode)  
TRANSFER MODE  
SOURCE SELECT  
DivX (depends on disc)  
When you select “AUTO” the constructing method of the DivX contents is automatically distinguished and output. If the picture is distorted,  
select “INTERLACE” or “PROGRESSIVE” depending on which constructing method was used when the contents were recorded to disc.  
AUTO, INTERLACE, PROGRESSIVE  
On-Screen Menu 3 (Audio)  
DIALOG ENHANCER  
(page 15, Dialogue enhancer)  
REMASTER  
DVD-V DVD-VR  
Discs recorded with multi channels LPCM at 44.1 kHz or 48 kHz  
This feature gives you a more natural sound by adding the higher frequency signals not recorded on the disc.  
WMA MP3 Discs recorded at 44.1 kHz or 48 kHz  
CD  
This feature reproduces the frequencies lost during recording to give you a sound closer to the original.  
Press [e r] to select “OFF”, “1”, “2” or “3”.  
Setting  
1
2
3
Type of music DVD-V CD  
High tempo (e.g., pop and rock)  
Various tempos (e.g., jazz)  
Low tempo (e.g., classical)  
Off  
Effect level WMA MP3  
Light  
Medium  
Strong  
Off  
OFF  
When connecting with DIGITAL AUDIO OUT terminal, the actual output sampling frequency depends on “PCM OUTPUT” setting in  
“AUDIO” menu (page 20).  
This feature may not work when connected with HDMI AV OUT terminals.  
This may not work depending on the disc’s recording.  
This does not work with MP3 on DVD-RAM or DVD-R/RW.  
ADVANCED SURROUND  
(page 14, Enjoying advanced surround)  
Note  
You cannot use settings in On-Screen Menu 3 during pause, slow-motion, and search.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using On-Screen Menus  
On-Screen Menu 4 (HDMI)  
HDMI STATUS  
Indicates various information when connected with HDMI AV OUT terminal (below, Confirming HDMI information).  
Confirming HDMI information  
e.g.  
DVD-V  
HDMI - INFORMATION  
Connection status  
CONNECTED STATE  
AUDIO STREAM  
MAX CHANNEL  
VIDEO FORMAT  
COLOR SPACE  
CONNECTED  
PCM  
page 15, Changing soundtracks  
2 ch  
Shows the maximum channel number of the connected equipments.  
480p  
below, VIDEO FORMAT  
below, COLOR SPACE  
YCbCr 4:4:4  
HD ENHANCER  
VIDEO FORMAT  
With HDMI connection (When “VIDEO PRIORITY” is set to “ON”) (page 20, “HDMI” menu)  
Makes the quality of HDMI video output (720p, 1080i, 1080p) sharp.  
OFF, 1 (weakest) to 3 (strongest)  
With HDMI connection (When “VIDEO PRIORITY” is set to “ON”) (page 20, “HDMI” menu)  
480p/720p/1080p (progressive)  
480i/1080i (interlace)  
The item will vary depending on the connected equipment.  
With HDMI connection (When “VIDEO PRIORITY” is set to “ON”) (page 20, “HDMI” menu)  
RGB YCbCr 4:4:4 YCbCr 4:2:2  
COLOR SPACE  
An “ ” mark will only appear for the corresponding connected equipment model.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the player settings  
Select  
Select  
Select  
1
2
3
4
5
1
4
7
2
5
8
0
3
6
9
Shows  
Select the  
Setup  
Select the  
item.  
Make the  
settings.  
Press to  
exit.  
menu.  
menu.  
Register  
Register  
Register  
The settings remain intact even if you switch the unit to standby.  
Underlined items are the factory preset.  
“VIDEO” menu  
SETTING STATE  
TV ASPECT  
Choose the setting to suit your  
television and preference.  
Display the current setting of the items below  
4:3PAN&SCAN  
The sides of the picture are cut off so it fills  
the screen (unless prohibited by the disc).  
4:3LETTERBOX  
The QUICK SETUP enables successive settings of the items in the shaded area.  
“DISC” menu  
SETTING STATE  
AUDIO  
Choose the audio  
language.  
SUBTITLE  
Choose the subtitle  
language.  
MENUS  
Choose the language  
for disc menus.  
RATINGS  
Display the current setting of the items below  
1
ENGLISH FRENCH SPANISH ORIGINAL  
To select how to show images  
made for 16:9 aspect screens  
on a 4:3 aspect television.  
Picture is shown in the letterbox style.  
2
OTHER ----  
4:3ZOOM  
3
4:3PAN&SCAN  
4:3LETTERBOX  
4:3ZOOM  
AUTOENGLISH FRENCH SPANISH  
2
Scales down the horizontal edges of a 4:3  
aspect ratio image.  
16:9NORMAL  
OTHER ----  
2
ENGLISH FRENCH SPANISH OTHER ----  
To select how to show images  
made for 4:3 aspect screens  
on a 16:9 aspect television.  
Stretches a 16:9 aspect ratio image horizontally.  
16:9SHRINK  
Displays a 4:3 aspect ratio image in the center  
of the screen.  
16:9ZOOM  
Adjusts the horizontal width to display a full  
screen image in 16:9 aspect ratio.  
16:9NORMAL  
16:9SHRINK  
16:9ZOOM  
Setting ratings (When level 8 is selected)  
0 LOCK ALL: To prevent play of discs without  
ratings levels.  
1 to 7: To prohibit play of DVD-Video with corresponding  
ratings recorded on them.  
8 NO LIMIT  
Set a ratings level to  
limit DVD-Video play.  
When setting a ratings level, a password screen is shown.  
Follow the on-screen instructions.  
Do not forget your password.  
A message screen will be shown if a DVD-Video  
exceeding the ratings level is inserted in the unit. Follow  
the on-screen instructions.  
TV TYPE  
Select to suit the type of television.  
STANDARD CRT LCD PROJECTION PLASMA  
TIME DELAY  
0 ms  
20 ms  
40 ms  
100 ms  
When connected with an AV amplifier and Plasma display, adjust 60 ms 80 ms  
if you notice the audio is out of sync with the video.  
STILL MODE  
Specify the type of picture  
shown when paused.  
AUTO  
PASSWORD  
1. Select “CHANGE” and press [ENTER].  
FIELD: The picture is not blurred, but picture quality is lower.  
FRAME: Overall quality is high, but the picture may appear blurred.  
LIGHTER: When connected through VIDEO OUT or S  
Change the password 2. Enter the current password with the numbered buttons,  
for “RATINGS”  
(above).  
then press [ENTER].  
3. Enter the new password with the numbered buttons,  
then press [ENTER].  
If “VERIFY” is displayed, please verify the password  
and insert it again.  
BLACK LEVEL  
Change the black level of the  
picture if you connected a television DARKER: When connected through COMPONENT VIDEO OUT.  
through the COMPONENT VIDEO  
OUT terminals.  
VIDEO OUT.  
This setting is irrelevant when connected through the  
HDMI AV OUT terminal.  
1 The original language designated on the disc is selected.  
VIDEO OUT (I/P)  
INTERLACE PROGRESSIVE  
2 Input a code number referring to the table (page 21).  
Select “PROGRESSIVE” only When you select “PROGRESSIVE”, a message screen will appear.  
if connecting to a progressive  
output compatible television.  
3 If the language selected for “AUDIO” is not available, subtitles appear in that  
language (If available on the disc).  
For progressive output, press [e] and then press [ENTER].  
Press [RETURN] to cancel.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the player settings  
“AUDIO” menu  
AUDIO OUT  
RGB RANGE  
ON: Audio output is from HDMI AV OUT terminal.  
OFF: Audio output is not from HDMI AV OUT terminal.  
STANDARD  
SETTING STATE  
Display the current setting of the items below  
UP TO 48kHz: When connected to equipment compatible  
with 44.1 or 48 kHz  
PCM OUTPUT  
Check the digital  
ENHANCED: When the black and white images are not distinct.  
input limitations of the  
equipment you connect  
using COAXIAL terminal  
and select the maximum  
sampling frequency of  
PCM digital output.  
UP TO 96kHz: When connected to equipment compatible  
It only works when the COLOR SPACE (page 18,  
with 88.2 or 96 kHz  
Signals from copy-protected discs are converted to 48  
or 44.1 kHz.  
Some equipment cannot handle sampling frequencies  
of 88.2 kHz, even if they can handle 96 kHz. Read your  
equipment’s operating instructions for details.  
On-Screen Menu 4) is set to RGB.  
ON: The EZ SyncTM “HDAVI ControlTM” is available  
EZ Sync  
(page 24).  
OFF  
DOLBY DIGITAL  
BITSTREAM Select “BITSTREAM” when the equipment  
“OTHERS” menu  
With COAXIAL or HDMI PCM  
AV OUT connections  
can decode the bitstream (digital form of  
multi-channel data). Otherwise, select “PCM”.  
(If the bitstream is output to the equipment  
without a decoder, high levels of noise can be  
output and may damage your speakers and  
hearing.)  
SETTING STATE  
Display the current setting of the items below  
REGISTRATION  
Displays the unit’s  
registration code.  
SHOW CODE: You need this registration code to purchase  
and play DivX Video-on-Demand (VOD) content  
(page 24, About DivX VOD contents).  
To change the slideshow timing  
1 SEC to 15 SEC (in 1 unit) 15 SEC to 60 SEC (in 5 unit)  
(pages 8 and 9)  
DTS  
BITSTREAM  
With COAXIAL or HDMI PCM  
AV OUT connections  
(pages 8 and 9)  
JPEG TIME  
60 SEC to 180 SEC (in 30 unit)  
DYNAMIC RANGE  
ON: Adjusts for clarity even when the volume is low  
through compressing the range of the lowest sound level  
and the highest sound level. Convenient for late night  
viewing. (Only works with Dolby Digital.)  
OFF  
“3 SEC” is the factory preset.  
FL DIMMER  
BRIGHT DIM  
Changes the brightness AUTO: The display is dimmed, but brightens only when you  
of the unit’s display.  
perform some operations.  
ON: The unit switches to standby mode after about 30  
AUTO POWER OFF  
When audio is output from HDMI AV OUT terminal, and the connected equipment  
does not support the item selected, the actual output will depend on the performance  
of this connected equipment.  
minutes in the stop mode.  
OFF  
QUICK SETUP  
DVD-VR/DATA  
SET: Displays the QUICK SETUP settings  
DVD-VR: To play DVD-VR on DVD-RAM.  
“DISPLAY” menu  
Select format to play  
DVD-RAM discs.  
DEFAULTS  
DATA: To play  
or  
contents on DVD-RAM.  
JPEG  
MP3  
SETTING STATE  
LANGUAGE  
Display the current setting of the items below  
ENGLISH FRANÇAIS ESPAÑOL  
RESET  
“HDMI” menu  
This returns all values in The password screen is shown if “RATINGS” (page 19) is  
the Setup menus to the  
default settings.  
set. Please enter the same password and press [ENTER],  
then turn the unit off and on again.  
SETTING STATE  
VIDEO PRIORITY  
Display the current setting of the items below  
ON: When connected through the HDMI AV OUT terminal.  
Video is output from the HDMI terminal. Video is also  
output from the COMPONENT VIDEO OUT terminal,  
but only in 480i (interlace).  
OFF: When connected through the COMPONENT  
VIDEO OUT terminal. Video is output from the  
COMPONENT VIDEO OUT terminal according to the  
setting of “VIDEO OUT (I/P)” (page 19, “VIDEO”  
menu). Video is also output from the HDMI terminal.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting guide  
Before requesting service, make the following checks. If you are in doubt about some  
of the check points, or if the solutions indicated in the chart do not solve the problem,  
refer to “Customer Services Directory” on page 26 if you reside in the U.S.A., or refer  
to “Product information” on page 4 if you reside in Canada. In other areas, consult your  
dealer.  
Language code list  
Abkhazian:  
Afar:  
6566  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6589  
6590  
6665  
6985  
6678  
6890  
6672  
6682  
6671  
7789  
6669  
7577  
6765  
9072  
6779  
7282  
6783  
6865  
7876  
6978  
6979  
6984  
7079  
7074  
7073  
7082  
7089  
7176  
7565  
6869  
6976  
7576  
7178  
7185  
7265  
Hebrew:  
Hindi:  
Hungarian:  
Icelandic:  
Indonesian:  
Interlingua:  
Irish:  
7387 Samoan:  
7273 Sanskrit:  
7285 Scots Gaelic:  
7383 Serbian:  
7378 Serbo-Croatian:  
7365 Shona:  
7165 Sindhi:  
7384 Singhalese:  
7465 Slovak:  
7487 Slovenian:  
7578 Somali:  
7583 Spanish:  
7575 Sundanese:  
7589 Swahili:  
7579 Swedish:  
7585 Tagalog:  
7679 Tajik:  
7665 Tamil:  
7686 Tatar:  
7678 Telugu:  
7684 Thai:  
7775 Tibetan:  
7771 Tigrinya:  
7783 Tonga:  
7776 Turkish:  
7784 Turkmen:  
7773 Twi:  
8377  
8365  
7168  
8382  
8372  
8378  
8368  
8373  
8375  
8376  
8379  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Afrikaans:  
Albanian:  
Ameharic:  
Arabic:  
Power  
Armenian:  
Assamese:  
Aymara:  
Azerbaijani:  
Bashkir:  
Basque:  
Bengali; Bangla:  
Bhutani:  
Bihari:  
No power.  
Insert the AC power supply cord securely into the household  
AC outlet. (9)  
When “AUTO POWER OFF” is set to “ON”, the unit  
automatically switches to standby after approximately 30  
minutes in the stop mode. (20)  
Italian:  
Japanese:  
Javanese:  
Kannada:  
Kashmiri:  
Kazakh:  
Kirghiz:  
Korean:  
Kurdish:  
Laotian:  
Latin:  
Latvian, Lettish:  
Lingala:  
Lithuanian:  
Macedonian:  
Malagasy:  
Malay:  
Malayalam:  
Maltese:  
Maori:  
The unit is  
automatically  
switched to the  
standby mode.  
No operation  
No response  
when any buttons  
pressed.  
This unit cannot play discs other than the ones listed in  
these operating instructions. (5)  
Breton:  
Bulgarian:  
Burmese:  
Byelorussian:  
Cambodian:  
Catalan:  
Chinese:  
Corsican:  
Croatian:  
Czech:  
The unit may not be operating properly due to lightning,  
static electricity or some other external factor. Turn the unit  
off and then back to ON. Alternatively, turn the unit off,  
disconnect the AC power supply cord, and then reconnect it.  
Condensation has formed: Wait 1 to 2 hours for it to  
evaporate.  
No response when  
remote control  
buttons pressed.  
Check that the batteries are installed correctly. (9)  
The batteries are depleted: Replace them with new ones. (9)  
Point the remote control at the remote control sensor and  
operate. (10)  
Danish:  
Dutch:  
English:  
Marathi:  
7782 Ukrainian:  
7779 Urdu:  
No picture or sound. • Check the video or audio connection. (7 to 9)  
Esperanto:  
Estonian:  
Faroese:  
Fiji:  
Moldavian:  
Mongolian:  
Nauru:  
Nepali:  
Norwegian:  
Oriya:  
Pashto, Pushto:  
Persian:  
Polish:  
Portuguese:  
Punjabi:  
Quechua:  
Check the power or input setting of the connected  
equipment.  
7778 Uzbek:  
7865 Vietnamese:  
7869 Volapük:  
7879 Welsh:  
7982 Wolof:  
8083 Xhosa:  
7065 Yiddish:  
8076 Yoruba:  
8084 Zulu:  
You have forgotten  
your ratings  
password.  
Reset all the settings  
to Factory Preset.  
While stopped, remove the disc, and then press and hold  
[q] (PLAY) and [g] on the unit and then also press and hold  
[POWER 8] on the unit until “INITIALIZED” disappears from  
the television. Turn the unit off and on again. All settings will  
return to the default values.  
Finnish:  
French:  
Frisian:  
Galician:  
Georgian:  
German:  
Greek:  
8065  
8185  
Greenlandic:  
Guarani:  
Gujarati:  
Hausa:  
Rhaeto-Romance: 8277  
Romanian:  
Russian:  
8279  
8285  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting guide  
Specific operation impossible or incorrect  
Picture incorrect  
Picture distorted.  
It takes time before  
play starts.  
MP3 DivX  
Play may take time to begin when an MP3 track has still  
picture data. Even after the track starts, the correct play time  
will not be displayed, however this is normal.  
This is normal on DivX video.  
Ensure that the unit is not connected through a video  
cassette recorder. (7)  
Make sure that progressive output has not been selected  
when the connected television is not progressive compatible.  
Press and hold [RETURN] until the picture displays correctly.  
The settings will return to “INTERLACE”.  
The program  
functions do not  
work.  
These functions do not work with some DVD-Videos.  
Change “SOURCE SELECT” in On-Screen Menu 2.  
DivX  
(17)  
Menu doesn’t  
appear.  
Press [g] twice and then press [q] (PLAY).  
VCD  
with  
Picture size doesn’t  
fit the screen.  
DivX  
Change “TV ASPECT” in “VIDEO” menu. (19)  
Use the television to change the aspect. If your television  
does not have that function, change “TV ASPECT”. (19)  
Change the zoom setting. (15)  
playback control  
Play doesn’t start.  
If a disc contains CD-DA and other formats, proper playback  
may not be possible.  
This unit may not play WMA and MPEG4 that contains still  
picture data.  
If playing DivX VOD content, refer to the homepage where  
you purchased it. (Example: www.divx.com/vod)  
Display the subtitles. (14)  
Picture stops.  
Picture may stop if the DivX files are greater than 2GB.  
The television may  
display incorrectly or  
colors appear faded.  
PAL discs cannot be played.  
Connect to a progressive output compatible television to  
enjoy progressive video.  
Picture may not be seen when more than 4 devices are  
connected with HDMI cables. Reduce the number of  
connected devices.  
No subtitles.  
The subtitles  
overlap closed  
captions recorded  
on discs.  
Clear the subtitles. (14)  
Menu not displayed  
correctly.  
Restore the zoom ratio to “NORMAL. (15)  
Change “TV ASPECT” in “VIDEO” menu. (19)  
In A-B Repeat, point  
The end of an item becomes point B when it is reached.  
B is automatically set.  
Recording  
Repeat play is  
automatically  
canceled.  
A-B Repeat is canceled when you press [QUICK REPLAY].  
Repeat play may be canceled when you press [CM SKIP].  
Cannot record to  
digital recording  
equipment.  
You cannot record WMA/MP3.  
You cannot record DVDs that have protection preventing  
digital recording.  
(Incorrect sound  
recorded.)  
You cannot record DVDs if the recording equipment cannot  
handle signals with a sampling frequency of 48 kHz.  
Make the following settings:  
Progressive video  
There is ghosting  
when progressive or  
HDMI output is on.  
This problem is caused by the editing method or material  
used on DVD-Video, but should be corrected if you use  
interlace output. Change “VIDEO OUT (I/P)” in “VIDEO”  
menu to “INTERLACE”. (19)  
If the unit is connected to the television through VIDEO OUT  
or S VIDEO OUT, output will be interlace.  
– ADVANCED SURROUND: OFF (14)  
– PCM OUTPUT:  
– DOLBY DIGITAL:  
– DTS:  
UP TO 48kHz (20)  
PCM (20)  
PCM (20)  
Pictures not in  
progressive output.  
Closed captions not • When progressive output or HDMI output is on, closed  
displayed. captions will not be displayed.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound incorrect  
Sound distorted.  
Television displays  
Set Advanced surround to “OFF”. (14)  
“ERR H ”  
 stands for a  
number.  
Trouble may have occurred. The number following “ERR H”  
depends on the status of the unit. Turn the unit off and then  
back to ON. Alternatively, turn the unit off, disconnect the AC  
power supply cord, and then reconnect it.  
Noise may occur when playing WMA files.  
With HDMI AV OUT connections, audio may not be output  
from other terminals in the way that was set.  
If the service numbers fail to clear, note the service number  
and contact a qualified service person.  
No sound.  
Turn the volume up.  
DivX  
Audio may not be output due to how files were  
created.  
“ERR U11”  
The disc may be dirty. (6)  
You haven’t inserted the disc correctly: Insert it correctly. (10)  
The operation is prohibited by the unit or disc.  
Audio may not be heard when more than 4 devices are  
connected with HDMI cables. Reduce the number of  
connected devices.  
When using the HDMI connection, ensure that “AUDIO OUT”  
in the “HDMI” menu is set to “ON”.  
If you have connected a digital amplifier which does not  
include decoder, be sure to select “PCM” in “DOLBY  
DIGITALor “DTS” in “AUDIO” menu. (20)  
5”  
“NO DISC”  
You haven’t inserted a disc: Insert one.  
You haven’t inserted the disc correctly: Insert it correctly. (10)  
Piercing noise  
comes from the  
speakers.  
“CANNOT PLAY  
AUDIO”  
“NO AUDIO”  
Audio has not been recorded, or recorded in a format this  
unit cannot playback. Video playback only is possible. (6)  
Effects do not work. • None of the audio effects work when the unit is outputting  
bitstream signals from the COAXIAL or HDMI AV OUT  
terminal. (8, 9)  
“THIS DISC MAY  
NOT BE PLAYED IN  
YOUR REGION.”  
“THIS TYPE OF  
DISC CANNOT  
BE PLAYED.  
You can only play DVD-Video if their region number is “1”,  
“ALLor multiple region numbers including “1”. (Cover)  
Some audio effects do not work or have less effect with some discs.  
Advanced surround and Remaster do not work if you have  
changed the play speed.  
You inserted a disc that has not been finalized. (5)  
You inserted a disc the unit cannot play; insert one it can. (5)  
You inserted a blank disc.  
PLEASE INSERT A  
DIFFERENT DISC.”  
“AUTHORIZATION  
ERROR  
THIS PLAYER IS  
NOT AUTHORIZED  
TO PLAY THIS  
Unit displays  
Trouble may have occurred. Turn the unit off and then back  
to ON. Alternatively, turn the unit off, disconnect the AC  
power supply cord, and then reconnect it.  
If the service numbers fail to clear, note the service number  
and contact a qualified service person.  
You inserted a disc the unit cannot play; insert one it can. (5)  
You inserted a blank disc.  
You inserted a disc that has not been finalized. (5)  
You are trying to play the DivX VOD content that was  
purchased with a different registration code.You cannot play  
the content on this unit. (24)  
The number following  
“H” depends on the  
status of the unit.  
VIDEO.”  
DivX  
“RENTAL EXPIRED” • The DivX VOD content has zero remaining plays.You cannot  
DivX  
You haven’t inserted a disc: Insert one.  
You haven’t inserted the disc correctly: Insert it correctly. (10)  
play it. (24)  
The disc may be dirty. (6)  
You haven’t inserted the disc correctly: Insert it correctly. (10)  
The connected equipment is not HDMI-compatible.  
The HDMI connection acts unusually.  
– The connected equipment is not HDMI-compatible.  
– The HDMI cable is too long.  
– The HDMI cable is damaged.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About DivX VOD contents  
EZ SyncTM “HDAVI ControlTM”  
DivX Video-on-Demand (VOD) content is encrypted for copyright protection. In order to  
play DivX VOD content on this unit, you first need to register the unit.  
Follow the on-line instructions for purchasing DivX VOD content to enter the unit’s  
registration code and register the unit. For more information about DivX VOD, visit  
EZ Sync “HDAVI Control”  
EZ Sync “HDAVI Control” is a convenient function that offers linked operations of this  
unit, and a Panasonic television (VIERA) or receiver under EZ Sync “HDAVI Control”.  
You can use this function by connecting the equipment with the HDMI cable. See the  
operating instructions for connected equipment for operational details.  
Connect your other EZ Sync “HDAVI Control” compatible equipment with an HDMI  
cable.  
(Cables that do not meet the HDMI specifications are not compatible with this  
feature. Use a Panasonic HDMI cable for best results.)  
Recommended part number:  
Display the unit’s registration code  
(page 20, “REGISTRATION” in “OTHERS” menu)  
OTHERS-REGISTRATION (DIVX)  
RP-CDHG15 (1.5 m/4.9 ft.), RP-CDHG30 (3.0 m/9.8 ft.), RP-CDHG50  
(5.0 m/16.4 ft.), etc.  
DIVX(R) VIDEO ON DEMAND  
YOUR REGISTRATION CODE IS  
Set the EZ Sync “HDAVI Control” operations on the connected equipment (e.g.,  
television).  
XXXXXXXX  
8 alphanumeric characters  
TO LEARN MORE VISIT  
Turn on all EZ Sync “HDAVI Control” compatible equipment, turn the television off  
and on, and then select this unit’s input channel on the connected television so that  
the EZ Sync “HDAVI Control” function works properly. Also when the connection or  
settings are changed, repeat this procedure.  
PRESS ENTER KEY TO CONTINUE  
Automatic input switching  
When play starts on the unit, the television input will automatically switch to the HDMI  
input mode and television displays the corresponding action.  
We recommend that you make a note of this code for future reference.  
After playing DivX VOD content for the first time, another registration code is then  
displayed in “REGISTRATION”. Do not use this registration code to purchase DivX  
VOD content. If you use this code to purchase DivX VOD content, and then play  
the content on this unit, you will no longer be able to play any content that you  
purchased using the previous code.  
If you purchase DivX VOD content using a registration code different from this  
unit’s code, you will not be able to play this content. (“AUTHORIZATION ERROR” is  
displayed.)  
Power on link  
When the television is off and play starts on the unit, the television will automatically  
turn on.  
(Picture or sound may not be available for the first few seconds.)  
Power off link  
Regarding DivX content that can only be played a set number of times  
Some DivX VOD content can only be played a set number of times. When you play this  
content, the remaining number of plays is displayed.You cannot play this content when  
the number of remaining plays is zero. (“RENTAL EXPIRED” is displayed.)  
All connected equipment compatible with EZ Sync “HDAVI Control” including this unit  
automatically turns off when you switch the television off.  
The unit automatically turns off even when the on-screen menus is displayed on the  
television. The unit automatically turns off while in playback.  
Only this unit turns off when you press the power button of the unit or the remote  
control for shutting it down. Other connected equipment compatible with EZ Sync  
“HDAVI Control” stay on.  
When playing this content  
The number of remaining plays is reduced by one if  
– you press [^] or [SETUP].  
Note  
– you press [g]. (Press [h] to stop play.)  
– you press [u i] or [t y] etc. and arrive at another content or the start of  
the content being played.  
Not all 2007 DVD players are compatible with all the features of all the 2007 Ez Sync  
products.  
Resume (page 10, Stop) function does not work.  
EZ Sync™ is a trademark of Matsushita Electric Industrial Co., Ltd.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
DivX  
DivX is a popular media technology created by DivX, Inc.  
DivX media files contain highly compressed video with  
high visual quality that maintains a relatively small file  
size.  
Specifications  
Signal system:  
Operating temperature range:  
Operating humidity range:  
NTSC  
Total harmonic distortion:  
CD-Audio:  
Digital audio output:  
Coaxial digital output:  
HDMI AV output  
4 5 to 4 35 oC  
0.003 %  
5 to 90 % RH (no condensation)  
Discs played [8 cm (3 ") or 12 cm (5 ")]:  
Pin jack  
Type A Connector (19 pin)  
CEC Ver. 1.3a  
6, 7  
(1) DVD (DVD-Video, DivX  
)
Down-mixing  
4, 7  
2, 7  
5, 7  
(2) DVD-RAM (DVD-VR, JPEG, MP3,MPEG4  
,
,
Pickup:  
This is a process of remixing the multi-channel audio  
(surround sound) on some discs into two channels.  
When you want to listen to the audio on a DVD with a  
5.1 channel digital surround track through your television  
speakers, the down-mixed audio will be output.  
6, 7  
DivX  
)
Wave length:  
Laser power:  
Power supply:  
For the U.S.A. and Canada  
For others  
653 nm/790 nm  
CLASS 1/CLASS 3A  
4, 7  
2, 7  
(3) DVD-R (DVD-Video, DVD-VR, JPEG, MP3  
5, 7  
6, 7  
MPEG4, DivX  
)
(4) DVD-R DL (DVD-Video)  
AC 120 V, 60 Hz  
AC 110 to 240 V, 50/60 Hz  
4, 7  
(5) DVD-RW (DVD-Video, DVD-VR, JPEG  
,
2, 7  
5, 7  
6, 7  
MP3, MPEG4, DivX  
(6) 4R/4RW (Video)  
)
Power consumption:  
For the U.S.A. and Canada  
Film and video  
9 W  
10W  
DVD-Videos are recorded using either film or video. This  
unit can determine which type has been used, then uses  
the most suitable method of progressive output.  
Film: Recorded at 24 frames per second. (Recorded at  
30 frames per second as well). Generally appropriate for  
motion picture films.  
Video: Recorded at 30 frames/60 fields per second.  
Generally appropriate for TV drama programs or  
animation.  
(7) 4R DL (Video)  
For others  
1
(8) CD, CD-R/RW (CD(CD-DA), Video CD, SVCD  
,
Power consumption in standby mode: approx. 1 W  
Dimensions (W x D x H):  
4, 7  
3, 7  
2, 7  
5, 7  
6, 7  
JPEG, WMA, MP3, MPEG4, DivX  
)
Video output:  
Output level:  
430 mm x 231 mm x 43 mm (excluding protrusions)  
(16 15/16" x 9 1/16" x 1 11/16") (excluding protrusions)  
430 mm x 239 mm x 43 mm (including protrusions)  
(16 15/16" x 9 7/16" x 1 11/16") (including protrusions)  
1 Vp-p (75 )  
Pin jack (1 system)  
Output terminal:  
S-video output:  
Y output level:  
C output level: NTSC  
Output terminal:  
Component video output:  
[NTSC: 525(480)p/525(480)i]  
Y output level:  
PB output level:  
PR output level:  
Output terminal:  
Pin jack (Y: green, PB: blue, PR: red) (1 system)  
Audio output:  
1 Vp-p (75 ) Mass (Weight):  
approx. 2.0 kg (4.4 lb.)  
0.286 Vp-p (75 )  
HDMI (High-Definition Multimedia Interface)  
HDMI is a next-generation digital interface for consumer  
electronic products. Unlike conventional connections, it  
transmits uncompressed digital video and audio signals  
on a single cable. This unit supports high-definition video  
output (1080p,1080i) from HDMI AV OUT terminal. To  
enjoy high-definition video a high definition compatible  
television is required.  
S terminal (1 system)  
1 Conforming to IEC62107  
2 MPEG-1 Layer 3, MPEG-2 Layer 3  
1 Vp-p (75 )  
0.7 Vp-p (75 )  
0.7 Vp-p (75 )  
3 Windows Media Audio Ver. 9.0 L3  
Not compatible with Multiple Bit Rate (MBR)  
4 Exif Ver 2.1 JPEG Baseline files  
Picture resolution: between 160×120 and 6144×4096  
pixels (Sub sampling is 4:2:2 or 4:2:0)  
5 MPEG4 data recorded with the Panasonic SD multi  
cameras or DVD video recorders  
MPEG4  
Output level:  
Output terminal:  
Number of terminals:  
Audio performance:  
Frequency response:  
2 Vrms (1 kHz, 0 dB)  
Pin jack  
2 channel: 1 system  
A compression system for use on mobile devices or a  
network, that allows highly efficient recording at a low bit  
rate.  
Conforming to SD VIDEO specifications (ASF  
standard)/MPEG4 (Simple Profile) video system/  
G.726 audio system  
Sampling frequency  
6 Plays all versions of DivX® video (including DivX®6)  
with standard playback of DivX® media files. Certified  
to the DivX Home Theater Profile.  
Sampling is the process of converting the heights of  
sound wave (analog signal) samples taken at set periods  
into digits (digital encoding). Sampling frequency is the  
number of samples taken per second, so larger numbers  
mean more faithful reproduction of the original sound.  
DVD (linear audio):  
4 Hz to 22 kHz (48 kHz sampling)  
4 Hz to 44 kHz (96 kHz sampling)  
4 Hz to 20 kHz  
GMC (Global Motion Compensation) is not supported.  
7 The total combined maximum number of recognizable  
audio, picture and video contents and groups: 4000  
audio, picture and video contents and 256 groups.  
CD-Audio:  
S/N ratio:  
CD-Audio:  
115 dB  
Playback control (PBC)  
If a Video CD has playback control, you can select  
scenes and information with menus.  
Dynamic range:  
DVD (linear audio):  
CD-Audio:  
100 dB  
98 dB  
(This unit is compatible with version 2.0 and 1.1.)  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty (ONLY FOR U.S.A.)  
Panasonic Consumer Electronics Company,  
Division of Panasonic Corporation of North America  
One Panasonic Way Secaucus, New Jersey 07094  
Panasonic Puerto Rico, Inc.  
Ave. 65 de Infantería, Km. 9.5  
San Gabriel Industrial Park, Carolina, Puerto Rico 00985  
Panasonic DVD Player Limited Warranty  
Limited Warranty Coverage  
If your product does not work properly because of a defect in materials or workmanship, Panasonic  
Consumer Electronics Company or Panasonic Puerto Rico, Inc. (collectively referred to as “the  
warrantor”) will, for the length of the period indicated on the chart below, which starts with the date  
of original purchase (“Limited Warranty period”), at its option either (a) repair your product with new  
or refurbished parts, or (b) replace it with a new or a refurbished product. The decision to repair or  
replace will be made by the warrantor.  
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF  
MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.  
Some states do not allow the exclusion or limitation of incidental or consequential damages, or  
limitations on how long an implied Limited Warranty lasts, so the exclusions may not apply to you.  
This Limited Warranty gives you specific legal rights and you may also have other rights which vary  
from state to state. If a problem with this product develops during or after the Limited Warranty period,  
you may contact your dealer or Servicenter. If the problem is not handled to your satisfaction, then  
write to the warrantor’s Consumer Affairs Department at the addresses listed for the warrantor.  
Product or Part Name  
Parts  
Labor  
DVD Player  
Rechargeable Batteries (in exchange for defective item)  
One (1) Year  
Ten (10) Days  
Ninety (90) Days  
Not Applicable  
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, AREYOUR  
RESPONSIBILITY.  
During the “Labor” Limited Warranty period there will be no charge for labor. During the “Parts”  
warranty period, there will be no charge for parts.You must mail-in your product during the warranty  
period. If non-rechargeable batteries are included, they are not warranted. This Limited Warranty  
only applies to products purchased and serviced in the United States or Puerto Rico. This Limited  
Warranty is extended only to the original purchaser and only covers product purchased as new. A  
purchase receipt or other proof of original purchase date is required for Limited Warranty service.  
Customer Services Directory  
Obtain Product Information and Operating Assistance; locate your nearest Dealer or  
Servicenter; purchase Parts and Accessories; or make Customer Service and Literature  
requests by visiting our Web Site at:  
Mail-In Service  
For assistance in the continental U.S.A. in obtaining repairs please ship the product to:  
Panasonic Service and Technology Company  
Customer Servicenter  
Suite B  
4900 George McVay Drive  
McAllen,TX 78503  
or, contact us via the web at:  
You may also contact us directly at:  
1-800-211-PANA (7262),  
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.  
For assistance in Puerto Rico call Panasonic Puerto Rico, Inc. (787)-750-4300 or fax (787)-768-2910.  
For hearing or speech impaired TTY users, TTY: 1-877-833-8855  
When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the  
original carton. Include a letter detailing the complaint and provide a day time phone and/or email  
address where you can be reached.  
Accessory Purchases  
Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by  
IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE PURCHASER WILL  
BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF  
PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR  
THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.  
visiting our Web Site at:  
or, send your request by E-mail to:  
Limited Warranty Limits And Exclusions  
This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES  
NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT  
COVER damages which occurred in shipment, or failures which are caused by products not supplied  
by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling,  
misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls,  
improper maintenance, power line surge, lightning damage, modification, or commercial use (such as  
hotel, office, restaurant, or other business), rental use of the product, or service by anyone other than  
a Factory Servicenter or other Authorized Servicer, or damage that is attributable to acts of God.  
You may also contact us directly at:  
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday – Friday 9 am to 8 pm, EST.)  
Panasonic Service and Technology Company  
20421 84th Avenue South, Kent, WA 98032  
(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)  
For hearing or speech impaired TTY users, TTY : 1-866-605-1277  
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY  
COVERAGE”.THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL  
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY  
BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, cost of having  
someone remove or re-install an installed unit if applicable, travel to and from the servicer, loss of or  
damage to media or images, data or other recorded content. The items listed are not exclusive, but  
are for illustration only.)  
Service in Puerto Rico  
Panasonic Puerto Rico, Inc.  
Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985  
Phone (787)750-4300, Fax (787)768-2910  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty (ONLY FOR CANADA)  
Panasonic Canada Inc.  
5770 Ambler Drive, Mississauga, Ontario L4W 2T3  
PANASONIC PRODUCT – LIMITED WARRANTY  
EXCHANGE PROGRAM  
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to replace the product for a period as stated below from the date of  
original purchase.  
Panasonic Portable / Clock Radio (without Tape, CD, MD)  
Panasonic Audio Product  
Panasonic DVD Product  
One (1) year  
One (1) year  
One (1) year  
Ninety (90) days  
Accessories including rechargeable batteries  
LIMITATIONS AND EXCLUSIONS  
This warranty does not apply to products purchased outside Canada or to any product which has been improperly installed, subjected to usage for which the product was not  
designed, misused or abused, damaged during shipping, or which has been altered or repaired in any way that affects the reliability or detracts from the performance, nor does it  
cover any product which is used commercially. Dry cell batteries are also excluded from coverage under this warranty.  
This warranty is extended to the original end user purchaser only. A purchase receipt or other proof of date of original purchase is required before warranty service is performed.  
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES.  
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above  
limitations and exclusions may not be applicable.  
CONTACT INFORMATION  
For product information and operation assistance, please contact:  
Our Customer Care Centre:  
(905) 624-5505  
1-800-561-5505  
(905) 238-2360  
Telephone #:  
1-800 #:  
Fax #:  
Email link:  
For defective product exchange within the warranty period, please contact the original dealer or our Customer Care Centre.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Referencia rápida en español  
Conexiones  
Cómo disfrutar de una mejor calidad de sonido e imagen (conexión  
Conexión a un televisor  
HDMI)  
Televisor  
HDMI IN  
AUDIO IN  
VIDEO  
IN  
R
L
Cable HDMI  
Cable de audio/vídeo (incluido)  
Parte posterior  
Parte posterior  
Conecte el cable de alimentación de CA en último lugar  
Cable de alimentación de CA (incluido)  
A la toma de corriente  
CA doméstica  
AC IN  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reproducción básica  
Cuadro a cuadro  
(durante la pausa)  
DVD-VR DVD-V  
1
2
en sentido de avance solamente  
Seleccionar  
DVD-VR VCD  
POWER  
VCD  
(aparato principal)  
Vuelta a la  
pantalla anterior  
Selección de  
elementos en la  
pantalla  
Abra la bandeja del  
disco.  
OPEN/CLOSE  
Registrar  
(aparato principal)  
DVD-V  
Muestra el menú inicial de un disco.  
Cargue el disco.  
3
4
DVD-VR  
Reproduce los programas.  
DVD-V  
Menú del disco  
Muestra el menú de un disco.  
Inicie la reproducción.  
DVD-VR  
(aparato principal)  
Reproduce una lista de reproducción.  
VCD  
con control de reproducción  
Muestra el menú de un disco.  
La posición se memoriza cuando “RESUME STOP” aparece  
en la pantalla del televisor.  
Parada  
Pausa  
Pulse [q] (PLAY) para continuar.  
(Reanudar la reproducción)  
Pulse [g] para cancelar la posición.  
DVD-V DVD-VR CD VCD  
1
4
7
2
5
8
0
3
6
9
P.ej. para seleccionar 12: [ 10] [1] [2]  
Introducción de  
números  
MP3 JPEG MPEG4 DivX  
WMA  
P.ej. para seleccionar 123:  
[ 10] [1] [2] [3] [ENTER]  
Pulse [q] (PLAY) para reanudar la reproducción.  
Visualización de número  
Visualización de tiempo  
Hasta 5 pasos  
Pulse [q] (PLAY) para reanudar la reproducción.  
Visualización del  
aparato principal  
Búsqueda  
(durante la reproducción)  
Cámara lenta  
(durante la pausa)  
VCD  
Cámara lenta: En sentido de avance solamente.  
MPEG4 DivX Cámara lenta: No funciona.  
Pantalla de  
información  
JPEG  
Pulse [u i] para omitir saltar títulos, capítulos, pistas,  
Salto  
etc.  
También puede saltar hasta los marcadores.  
DVD-VR  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Referencia rápida en español  
Utilización de los menús en pantalla  
Pulse.  
Menú en pantalla 2 (Vídeo)  
1
2
Cada vez que se pulsa el botón:  
PICTURE MODE  
Para seleccionar la calidad de imagen de las  
películas.  
Menú en pantalla 4 (Disco/Reproducción)  
Menú en pantalla 2 (Vídeo)  
Menú en pantalla 3 (Audio)  
Menú en pantalla 4 (HDMI)  
(Salida)  
ZOOM  
Pulse [ ].  
JPEG  
h
Para seleccionar la relación de zoom.  
Para seleccionar “OFF”, “1”, “2” ó “3”.  
DNR  
TRANSFER MODE  
Para seleccionar un método de conversión de la  
salida progresiva adecuado al tipo de material.  
Seleccionar  
SOURCE SELECT  
DivX  
(depende del disco)  
AUTO, INTERLACE, PROGRESSIVE  
Seleccione el elemento.  
Menú en pantalla 3 (Audio)  
Registrar  
DIALOG ENHANCER  
Para escuchar más fácilmente el diálogo de las películas.  
OFF ON  
Reproducir un sonido más natural.  
Pulse [e r] para seleccionar “OFF”, “1”, “2” ó “3”.  
Para seleccionar “A. SURROUND1”,  
1
4
7
2
5
8
0
3
6
9
Seleccionar  
3
4
Haga los ajustes.  
Pulse para salir.  
REMASTER  
Registrar  
ADVANCED SURROUND  
“A. SURROUND2”, “A. SURROUND3” ó “OFF”.  
Menú en pantalla 4 (HDMI)  
(Con conexión HDMI)  
HDMI STATUS  
Menú en pantalla 1 (Disco/Reproducción)  
Indica distintos tipos de información cuanto está  
conectado el terminal HDMI AV OUT.  
(Cuando “VIDEO PRIORITY”, en la ficha “HDMI”,  
se encuentra en “ON”)  
Hace que la calidad de la salida de vídeo HDMI  
(720p, 1080i, 1080p) sea nítida.  
PG SEARCH, PL SEARCH,  
TITLE SEARCH, CHAPTER  
Para iniciar un elemento específico  
Pulse [e r] para seleccionar una opción, seguido de  
SEARCH,TRACK SEARCH, [ENTER], o pulse los botones numéricos.  
HD ENHANCER  
CONTENT SEARCH  
VCD No funciona cuando se utiliza el control de  
reproducción.  
OFF, 1 (menor) a 3 (mayor)  
AUDIO  
Para seleccionar la pista de sonido.  
VIDEO FORMAT  
COLOR SPACE  
(Cuando “VIDEO PRIORITY”, en la ficha “HDMI”,  
se encuentra en “ON”)  
480p/720p/1080p (progresiva)  
480i/1080i (entrelazada)  
PLAY SPEED  
REPEAT MODE  
Cambio de la velocidad de reproducción.  
Para seleccionar un elemento que se ha de repetir.  
Repetición A-B (para repetir una sección específica)  
El elemento mostrado depende del equipo que  
esté conectado.  
SUBTITLE  
Para seleccionar el idioma de los subtítulos o para  
visualizar la fecha de la fotografía.  
Selección de ángulo.  
DVD-V  
(Cuando “VIDEO PRIORITY”, en la ficha “HDMI” ,  
se encuentra en “ON”)  
ANGLE  
DATE DISPLAY JPEG  
OFF  
ON  
RGB  
YCbCr 4:4:4  
YCbCr 4:2:2  
JPEG  
ROTATION  
Rotación de imagen fija (durante la pausa).  
Aparecerá un “ ” solamente para el modelo de  
equipo conectado correspondiente.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cambio de los ajustes del reproductor  
1
2
5
8
0
3
6
9
Menú “DISPLAY”  
SETTING STATE  
Seleccionar  
Seleccionar  
1
2
3
4
4
7
Muestra el ajuste actual de los siguientes  
elementos  
ENGLISH FRANÇAIS ESPAÑOL  
Muestra el  
menú de  
configuración.  
LANGUAGE  
Pulse para  
salir.  
Registrar  
Haga los ajustes.  
Registrar  
Seleccione el menú.  
Seleccione el elemento.  
“HDMI” menu  
SETTING STATE  
Muestra el ajuste actual de los siguientes  
elementos  
Los ajustes permanecen intactos aunque usted ponga el aparato en el modo de  
espera.  
VIDEO PRIORITY  
AUDIO OUT  
RGB RANGE  
EZ Sync  
ON  
OFF  
Los elementos subrayados son los preajustados de fábrica.  
ON  
OFF  
QUICK SETUP permite ajustar correctamente los elementos sombreados.  
STANDARD  
ON  
ENHANCED  
OFF  
Menú “DISC”  
SETTING STATE  
AUDIO  
Muestra el ajuste actual de los siguientes elementos  
Menú “OTHERS”  
SETTING STATE  
1
ENGLISH FRENCH SPANISH ORIGINAL  
Muestra el ajuste actual de los siguientes  
elementos  
2
OTHER ----  
3
2
AUTOENGLISH FRENCH SPANISH OTHER ----  
REGISTRATION  
SHOW CODE: Este código de registro es  
SUBTITLE  
MENUS  
Muestra el código de registro de la necesario para poder comprar y reproducir  
unidad.  
JPEG TIME  
2
ENGLISH FRENCH SPANISH OTHER ----  
contenido de vídeos bajo demanda (VOD) DivX.  
1 SEC a 15 SEC (en 1 unidad)  
15 SEC a 60 SEC (en 5 unidades)  
60 SEC a 180 SEC (en 30 unidades)  
RATINGS  
Ajuste de calificaciones (si se selecciona el nivel 8)  
0 LOCK ALL  
Cambie la contraseña para “RATINGS” (arriba).  
1 a 7  
8 NO LIMIT  
PASSWORD  
“3 SEC” es el ajuste predeterminado de  
fábrica.  
Menú “VIDEO”  
SETTING STATE  
TV ASPECT  
Muestra el ajuste actual de los siguientes elementos  
4:3PAN&SCAN 4:3LETTERBOX 4:3ZOOM  
FL DIMMER  
BRIGHT  
ON  
DIM  
OFF  
AUTO  
AUTO POWER OFF  
QUICK SETUP  
16:9NORMAL  
16:9SHRINK  
16:9ZOOM  
SET: Mostrar la configuración de QUICK  
SETUP  
DVD-VR  
DATA  
TV TYPE  
STANDARD CRT LCD PROJECTION PLASMA  
TIME DELAY  
STILL MODE  
BLACK LEVEL  
VIDEO OUT (I/P)  
0 ms  
AUTO  
LIGHTER  
INTERLACE  
20 ms  
FIELD  
DARKER  
PROGRESSIVE  
40 ms  
60 ms  
FRAME  
80 ms  
100 ms  
DVD-VR/DATA  
Seleccione el formato de  
reproducción de discos DVD-RAM.  
DEFAULTS  
RESET  
Menú “AUDIO”  
SETTING STATE  
PCM OUTPUT  
DOLBY DIGITAL  
DTS  
Si el sonido sale por el terminal HDMI AV OUT y el equipo conectado no soporta  
el elemento seleccionado, la salida real dependerá del rendimiento del equipo  
conectado.  
Muestra el ajuste actual de los siguientes elementos  
UP TO 48kHz  
UP TO 96kHz  
1 Se selecciona el idioma original del disco.  
BITSTREAM  
PCM  
2 Introduzca un código de la tabla.  
3 Si el idioma seleccionado para “AUDIO” no está disponible, aparecen subtítulos en  
DYNAMIC RANGE  
ON  
OFF  
ese idioma (si están disponibles en el disco).  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol  
are trademarks of Dolby Laboratories.  
“DTS” is a registered trademark of DTS, Inc. and “DTS 2.0 + Digital Out” is a  
trademark of DTS, lnc.  
(Reference pages are shown in parentheses.)  
Main feature index  
Displaying current playback  
Changes the unit's display (11)  
condition (14)  
This product incorporates copyright protection technology that is protected by  
method claims of certain U.S. patents and other intellectual property rights owned  
by Macrovision Corporation and other rights owners. Use of this copyright protection  
technology must be authorized by Macrovision Corporation, and is intended for home  
and other limited viewing uses only unless otherwise authorized by Macrovision  
Corporation. Reverse engineering or disassembly is prohibited.  
Changes picture mode (14)  
Repeat play (14)  
Enjoys advanced surround (14)  
Changes play speed (14)  
To make the dialogue in  
movies easier to hear (15)  
Skips about one minute  
forward (15)  
Skips back about 10 seconds  
(14)  
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and 4,819,098, licensed  
for limited viewing uses only.  
This product is licensed under the MPEG-4 Visual patent portfolio license for the  
personal and non-commercial use of a consumer for (i) encoding video in compliance  
with the MPEG-4 Visual Standard (“MPEG-4 Video”) and/or (ii) decoding MPEG-4  
Video that was encoded by a consumer engaged in a personal and non-commercial  
activity and/or was obtained from a video provider licensed by MPEG LA to provide  
MPEG-4 Video. No license is granted or shall be implied for any other use. Additional  
information including that relating to promotional, internal and commercial uses and  
Shows a disc top menu (11, 13)  
Shows a program list (11, 13)  
Shows a disc menu (11, 13)  
Plays a playlist (11, 13)  
Shows On-Screen Menus (16)  
Windows Media, and the Windows logo are trademarks, or registered trademarks of  
Microsoft Corporation in the United States and/or other countries.  
Changes angles or rotates (15)  
Changes soundtracks (15)  
Changes subtitles (14)  
Enter and exit Setup menu (19)  
WMA is a compression format developed by Microsoft Corporation. It achieves the  
same sound quality as MP3 with a file size that is smaller than that of MP3.  
Program/random play (12)  
Reduces noise in pictures (15)  
Official DivX® Certified product.  
Selects the method of progressive  
Changes the zoom ratio (15)  
Plays all versions of DivX® video (including DivX®6) with standard playback of DivX®  
media files. DivX, DivX Certified, and associated logos are trademarks of DivX, Inc.  
and are used under license.  
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or  
registered trademarks of HDMI Licensing LLC.  
HDAVI ControlTM is a trademark of Matsushita Electric Industrial Co., Ltd.  
output conversion (15)  
This product may receive radio interference  
caused by mobile telephones during use.  
If such interference is apparent, please  
increase separation between the product  
and the mobile telephone.  
For units with PX printed on the outer  
packaging  
THIS UNIT IS INTENDED FOR USE IN  
MODERATE CLIMATES.  
For the U.S.A.  
For Canada  
En Sp  
Panasonic Consumer Electronics  
Company, Division of Panasonic  
Corporation of North America  
One Panasonic Way Secaucus,  
New Jersey 07094  
Panasonic Puerto Rico, Inc.  
Panasonic Canada Inc.  
5770 Ambler Drive  
Mississauga, Ontario  
L4W 2T3  
Ave. 65 de Infantería, Km. 9.5  
San Gabriel Industrial Park, Carolina,  
Puerto Rico 00985  
For others  
Panasonic Marketing Europe G.M.B.H.  
Wiesbaden N. (a Division of  
Panasonic Marketing G.M.B.H.)  
Military Sales Department  
6200 Wiesbaden-Biebrich,  
Hagenauerstr. 43  
Matsushita Electric Industrial Co., Ltd.  
Corporate Management Division for the Americas  
Sales Office for North America  
Tokyo Panasonic Sales Section  
32nd Floor, World Trade Center 4-1,  
This manual was printed  
with soy based ink.  
Hamamatsu-cho, 2-Chome, Minato-Ku,  
Tokyo 105-6132, Japan  
Germany  
RQTC0128-2P  
H0107MT3047  
© 2007 Matsushita Electric Industrial Co., Ltd.  
Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Dishwasher G 1202 User Manual
Miele Ventilation Hood M Nr 09 805 980 User Manual
MTD Cultivator TBGC User Manual
Napoleon Fireplaces Indoor Fireplace Fireplace User Manual
NDC comm Stereo System NWA0518 User Manual
NETGEAR Server RNDP6350 100NAS User Manual
Nikon Binoculars 10x44 SF IL User Manual
Novatel Car Satellite TV System OM 20000122 User Manual
Novatel Stereo System SMART ANTENNA User Manual
Olympus Camcorder E PL3 User Manual