Operating Instructions
Blu-ray Disc™ Player
Model No. DMP-BD75
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.
GN
GC
GA
GW
Download from Www.Somanuals.com. All Manuals Search And Download.
VQT3B11
Getting started
Safety precautions
Caution for AC Mains Lead
(For Saudi Arabia)
For your safety, please read the following text carefully.
WARNING
This appliance is supplied with a moulded three pin mains
plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the
replacement fuse has a rating of 5-ampere and that it is
approved by ASTA or BSI to BS1362.
Check for the ASTA mark Ï or the BSI mark Ì on the body
of the fuse.
Unit
≥
To reduce the risk of fire, electric shock or product damage,
– Do not expose this unit to rain, moisture, dripping or splashing.
– Do not place objects filled with liquids, such as vases, on this unit.
– Use only the recommended accessories.
– Do not remove covers.
– Do not repair this unit by yourself. Refer servicing to
qualified service personnel.
If the plug contains a removable fuse cover you must ensure
that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a
replacement cover is obtained.
A replacement fuse cover can be purchased from your local
dealer.
– Do not let metal objects fall inside this unit.
– Do not place heavy items on this unit.
AC mains lead
To reduce the risk of fire, electric shock or product damage,
– Ensure that the power supply voltage corresponds to the
voltage printed on this unit.
– Insert the mains plug fully into the socket outlet.
– Do not pull, bend, or place heavy items on the lead.
– Do not handle the plug with wet hands.
– Hold onto the mains plug body when disconnecting the plug.
– Do not use a damaged mains plug or socket outlet.
Install this unit so that the AC mains lead can be unplugged
from the socket outlet immediately if any problem occurs.
≥
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE
FOR THE SOCKET OUTLET IN YOUR HOME THEN
THE FUSE SHOULD BE REMOVED AND THE PLUG
CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED INTO
ANY 13-AMPERE SOCKET.
≥
If a new plug is to be fitted please observe the wiring code
as stated below.
If in any doubt please consult a qualified electrician.
CAUTION
Unit
IMPORTANT
The wires in this mains lead are coloured in accordance with the
following code:
Blue: Neutral, Brown: Live.
≥ This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
As these colours may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured Blue must be connected to the terminal
which is marked with the letter N or coloured Black or Blue.
The wire which is coloured Brown must be connected to the
terminal which is marked with the letter L or coloured Brown or Red.
≥
≥
Do not place sources of naked flames, such as lighted candles, on this unit.
This unit may receive radio interference caused by mobile
telephones during use. If such interference occurs, please
increase separation between this unit and the mobile telephone.
[For[Australia[and[New[Zealand]
≥ This unit is intended for use in moderate climates.
[For]Asia,]Middle]East]and]India]
≥ This unit is intended for use in tropical climates.
WARNING: DO NOT CONNECT EITHER WIRE TO THE
EARTH TERMINAL WHICH IS MARKED WITH THE
LETTER E, BY THE EARTH SYMBOL Ó OR COLOURED
GREEN OR GREEN/YELLOW.
Placement
≥ Place this unit on an even surface.
THIS PLUG IS NOT WATERPROOF—KEEP DRY.
≥
To reduce the risk of fire, electric shock or product damage,
– Do not install or place this unit in a bookcase, built-in
cabinet or in another confined space. Ensure this unit is
well ventilated.
Before use
Remove the connector cover.
How to replace the fuse
– Do not obstruct this unit’s ventilation openings with
newspapers, tablecloths, curtains, and similar items.
– Do not expose this unit to direct sunlight, high
temperatures, high humidity, and excessive vibration.
The location of the fuse differ according to the type of AC
mains plug (figures A and B). Confirm the AC mains plug
fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
Batteries
≥
1. Open the fuse cover with a screwdriver.
Danger of explosion if battery is incorrectly replaced. Replace
only with the type recommended by the manufacturer.
Figure A
Figure B
≥ Mishandling of batteries can cause electrolyte leakage
and may cause a fire.
– Do not mix old and new batteries or different types at the same time.
– Do not heat or expose to flame.
Fuse cover
– Do not leave the battery(ies) in a car exposed to direct sunlight
for a long period of time with doors and windows closed.
– Do not take apart or short circuit.
– Do not recharge alkaline or manganese batteries.
– Do not use batteries if the covering has been peeled off.
– Remove batteries if you do not intend to use the remote
control for a long period of time. Store in a cool, dark place.
2. Replace the fuse and close or attach the fuse cover.
Fuse
Figure A
Figure B
Fuse
(5 ampere)
(5 ampere)
≥
When disposing the batteries, please contact your local
authorities or dealer and ask for the correct method of disposal.
VQT3B11
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Check the supplied accessories before using this unit.
Unit and media care
∫ Clean this unit with a soft, dry cloth
1
2
1
Remote control (N2QAYB000580)
Batteries for remote control
Audio/Video cable
≥ Never use alcohol, paint thinner or benzine to clean this
unit.
≥ Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
[For[Australia,[New[Zealand]and]India]
AC mains lead*
1
∫ Clean the lens with the lens cleaner
[For\Middle\East\and\Asia[
Lens cleaner: RP-CL720AE
2
AC mains lead*
≥ This lens cleaner may not be for sale depending on the
region.
*
See page 10 for more information.
≥ This lens cleaner is sold as specific for DIGA, but can
be used on this unit as well.
≥ Product numbers provided in these operating instructions correct as of
February 2011. These may be subject to change.
≥ Do not use AC mains lead with other equipment.
∫ Clean discs
DO NOT
DO
Using the remote control
Insert so the poles (i and j) match those in the remote
control.
Wipe with a damp cloth and then wipe dry.
∫ Disc handling precautions
≥ Handle discs by the edges to avoid inadvertent scratches
or fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
≥ Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
≥ Do not use the following discs:
R6/LR6, AA
(Alkaline or
– Discs with exposed adhesive from removed stickers or
labels (rented discs etc).
manganese batteries)
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart shapes.
Point it at remote control signal sensor on this unit. (ꢀ 5)
∫ To dispose or transfer this unit
The unit may keep the user settings information in the unit. If
you discard this unit either by disposal or transfer, then
follow the procedure to return all the settings to the factory
presets to delete the user settings. (ꢀ 28, “To return all
settings to the factory preset.”)
≥ The operation history may be recorded in the memory of
this unit.
VQT3B11
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Control reference guide
11
1
2
Turn the unit on and off
TV operation buttons (ꢀ 12)
You can operate the TV through the unit’s remote control.
[Í TV] : Turn the television on and off
[AV] : Switch the input select
1
2
[i j VOL] : Adjust the volume
Select title numbers, etc./Enter numbers.
Cancel
3
4
5
6
7
8
9
Select audio (ꢀ 14)
12
Basic playback control buttons (ꢀ 14)
Show status messages (ꢀ 14)
Show Top menu/DIRECT NAVIGATOR (ꢀ 14)
Show OPTION menu (ꢀ 15)
13
3
14
10 Coloured buttons (red, green, yellow, blue)
These buttons are used when;
4
5
15
≥ Operating a BD-Video disc that includes JavaTM
applications (BD-J).
6
11 Transmit the remote control signal
12 Open or close the disc tray (ꢀ 13)
CAUTION
Do not place objects in front of the unit. The disc tray may
collide with objects when it is opened, and this may cause
malfunction.
16
17
7
13 Show playback menu (ꢀ 22)
14 Switch on/off Secondary Video (Picture-in-picture)
(ꢀ 16)
8
18
19
15 Start up the DLNA function (ꢀ 20)
16 Exit the menu screen
17 Show Pop-up menu (ꢀ 14)
18 Show HOME menu (ꢀ 13)
19 Selection/OK, Frame-by-frame (ꢀ 14)
20 Return to previous screen
9
20
10
1
2
3
4
5 6 7
8
1
Standby/on switch (Í/I) (ꢀ 10)
5
Remote control signal sensor
Distance: Within approx. 7 m
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
Angle: Approx. 20e up and down, 30e left and right
Stop (ꢀ 14)
6
7
8
2
3
4
Disc tray (ꢀ 13)
Start play (ꢀ 14)
USB port (ꢀ 13)
Open or close the disc tray (ꢀ 13)
Display (ꢀ 32)
Rear panel terminals (ꢀ 8–10)
VQT3B11
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable discs/USB devices
Device Disc markings
Device types
Contents format*
BD-Video
Video
Video
JPEG
BD-RE
BD
Video
DivX®
MKV
BD-R
DVD-Video
Video
Video
AVCHD
DivX®
MKV
MP3
JPEG
DVD-R
DVD
DVD-R DL
DVD-RW
Video
AVCHD
—
+R/+RW/+R DL
Music CD
Music [CD-DA]
DivX®
MKV
Music [CD-DA]
MP3
JPEG
CD
CD-R
CD-RW
—
DivX®
MKV
MP3
USB devices
(up to 2 TB)
—
USB
JPEG
* See page 7 and 31 for more information on the types of content that can be played.
VQT3B11
6
Download from Www.Somanuals.com. All Manuals Search And Download.
∫ Discs that cannot be played by this
∫ Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded
by a recorder, etc. needs to be finalized by the recorder to
play on this unit. Please refer to the recorder’s instructions.
unit
≥ DVD-RAM
≥ Super Audio CD
≥ Photo CD
∫ BD-Video
≥ DVD-Audio
≥ WMA discs
≥ DivX Plus HD discs
≥ HD DVD
≥ This unit supports high bit rate audio (Dolby Digital Plus,
Dolby TrueHD, DTS-HD High Resolution Audio and
DTS-HD Master Audio) adopted in BD-Video.
– If “Dolby D/Dolby D +/Dolby TrueHD” is set to “PCM”,
the maximum possible number of Dolby sound is 2ch
PCM. (ꢀ 25)
∫ Region management information
[For[Australia[and[New[Zealand]
BD-Video:
Example:
∫ Music CD
This unit plays BD-Video
marked with labels
containing the region
code “B”.
Operation and sound quality of CDs that do not conform to
CD-DA specifications (copy control CDs, etc.) cannot be
guaranteed.
∫ USB device
Example:
DVD-Video:
This unit plays DVD-Video
marked with labels
containing the region
≥ This unit does not guarantee connection with all USB
devices.
2
2
2
2
3
3
3
3
4
ALL
ALL
ALL
ALL
≥ This unit does not support USB device charging.
≥ FAT12, FAT16 and FAT32 file systems are supported.
≥ This unit supports USB 2.0 High Speed.
≥ This unit can support an HDD formatted to FAT32.
Some types of HDD may require the use of its external
power supply unit.
4
4
4
5
number “4” or “ALL”.
[For]Middle]East]
BD-Video:
Example:
This unit plays BD-Video
marked with labels
containing the region
code “B”.
∫ BD-RE, BD-R
Discs recorded in DR mode using Panasonic Blu-ray Disc
recorders may not playback the audio etc., correctly.
Example:
DVD-Video:
This unit plays DVD-Video
marked with labels
containing the region
2
number “2” or “ALL”.
[For[Asia]
BD-Video:
Example:
This unit plays BD-Video
marked with labels
containing the region
code “A”.
Example:
DVD-Video:
This unit plays DVD-Video
marked with labels
containing the region
3
number “3” or “ALL”.
[For[India]
BD-Video:
Example:
This unit plays BD-Video
marked with labels
containing the region
code “C”.
≥ It may not be possible to play the above media in some cases due to the
type of media, the condition of the recording, the recording method and
how the files were created.
≥ The producers of the disc can control how discs are played, so you may
not always be able to control play as described in these operating
instructions. Read the disc’s instructions carefully.
Example:
DVD-Video:
This unit plays DVD-Video
marked with labels
containing the region
5
number “5” or “ALL”.
VQT3B11
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections and settings
STEP 1 : Connecting to a TV
≥ Do not place the unit on amplifiers/receivers or equipment
that may become hot. The heat can damage the unit.
≥ Before making any connections we suggest you
temporarily disconnect all the units from AC power.
≥ Do not connect video signals through a video recorder.
Due to copy guard protection the picture may not be
displayed properly.
≥ Please use High Speed HDMI Cables that have the HDMI
logo (as shown on the cover). It is recommended that you
use Panasonic’s HDMI cable. When outputting 1080p
signal, please use HDMI cables 5.0 meters or less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m),
RP-CDHS50 (5.0 m), etc.
Back of the unit
∫ Via an HDMI AV OUT terminal
∫ Via a VIDEO OUT terminal
(High quality)
(Standard quality)
AUDIO IN
HDMI IN
R
L
VIDEO IN
Audio/Video cable
(supplied)
HDMI cable
≥ Set “HDMI Audio Output” to “On” (ꢀ 26).
≥ The HDMI connection supports VIERA Link “HDAVI
Control” (ꢀ 21).
≥ Connect terminals of the same colour.
VQT3B11
8
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 2 : Connecting to STEP 3 : Connecting to
an amplifier/receiver
a broadband network
The following services can be used when this unit is
connected to broadband.
– Firmware can be updated (ꢀ 12)
– You can enjoy BD-Live (ꢀ 16)
– You can access other devices (ꢀ 20)
For details about connection method, refer to the
instructions supplied with the connected equipment.
HDMIIN
∫ LAN cable connection
(ARC)
HDMI
cable
Multi channel
speakers
HDMI OUT
(ARC)
LAN Cable
Amplifier/receiver
Broadband router, etc.
HDMI IN
HDMI
cable
Internet
≥ Use category 5 or above straight LAN cables (STP) when
connecting to peripheral devices.
≥ Set “HDMI Audio Output” to “On” (ꢀ 26).
≥ Set “Digital Audio Output” depending on the connected
amplifier/receiver (ꢀ 25).
≥ Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.
≥ The HDMI connection supports VIERA Link “HDAVI
Control” (ꢀ 21).
≥ When using the TV or amplifier/receiver that does not
have the indication of “(ARC)” (non-ARC-compatible) on
the HDMI terminal, in order to enjoy TV’s sound by
amplifier/receiver it is also required to connect the
amplifier/receiver and TV using an optical digital cable.
VQT3B11
9
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 4 : Connecting
AC mains lead
STEP 5 : Settings
Easy Setting
After connecting your new player for the first time and
pressing [Í], a screen for the basic settings will appear.
Preparation
Turn on the television and select the appropriate video
input on the television.
1 Press [Í].
Setup screen appears.
2 Follow the on-screen instructions and
make the settings with [3, 4] and press
AC mains lead (supplied)
[For]Middle]East]
Use the AC mains lead that matches
the socket for the area you live in.
[OK].
“On-Screen Language” [For[Asia], “TV Aspect” and
“Quick Start” are set. (ꢀ 25 – 27)
[For\Saudi\Arabia[
BE SURE TO
READ THE
To a household
mains socket
After completing “Easy Setting”, you can perform “Network
Easy Setting”.
CAUTION FOR
THE AC MAINS
LEAD ON PAGE
3 BEFORE
CONNECTION.
≥ You can perform this setup anytime by selecting “Easy Setting” in the
Setup menu. (ꢀ 27)
[For[Asia]
AC mains lead with a label is for
Thailand.
≥ You can also change these settings individually. (ꢀ 25 – 27)
AC mains lead without a label is for
areas other than Thailand.
≥ This unit consumes a small amount of AC power (“Quick
Start”: “Off”, approx. 0.2 W) even when turned off. In the
interest of power conservation, if you will not be using this
unit for an extended period of time, it can be disconnected.
VQT3B11
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Easy Setting
Network Easy Setting
(Internet Connection Test)
Network Easy Setting (Internet Connection Test)
Complete.
After completing “Easy Setting”, you can continue with
“Network Easy Setting”.
- Connection to the Internet
Fail(B019)
Follow the on-screen instructions and make
the settings with [2, 1] and press [OK].
Failed the connection test.
Cannot find the server.(B019)
Please refer to the operating instructions for the cause
of the error and the countermeasure for it.
Press [OK].
Network Easy Setting
LAN setup and testing of home network and Internet
connections are required for Internet functions
(BD-Live etc.).
Broadband Internet connection is necessary for BD-Live.
Is a LAN cable already connected ?
Please refer to the operating instructions about network
connection.
OK
Display
Check the following
Press [OK] to proceed.
Cannot find the
server.
≥ “Primary DNS” and “Secondary
DNS” settings of “IP Address /
DNS Settings” (ꢀ 26)
(B019)
OK
RETURN
≥ The server may be busy or the
service may have been
Failed to connect to
the server.
suspended. Please wait a few
moments, and then try again.
≥ Settings of “Proxy Server
Settings” (ꢀ 26) and the router
(B020)
When you experience
problems with settings
≥ Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting “Network Easy Setting”
in the Setup menu. (ꢀ 26)
Network Easy Setting
(Home Network Connection Check)
≥ You can redo these settings individually using “Network Settings”.
Network Easy Setting (Home Network Connection Check)
Complete.
(ꢀ 26)
1. LAN cable connection
2. IP address setting
3. Connection to gateway
Fail
Fail
Fail
LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network
connection again.
Select “No” and press [OK] to finish Network
Easy Setting.
Yes
OK
No
Check the
following
Display
1. LAN cable connection
2. IP address setting
Fail
≥ Connection
of the LAN
Fail
cables (ꢀ 9)
3. Connection to gateway
1. LAN cable connection
2. IP address setting
Fail
Pass
Fail
≥ Connection
and settings
of the hub
and router
≥ Settings of
“IP Address /
DNS
3. Connection to gateway
1. LAN cable connection
Fail
Pass
Pass or
Home
2. IP address setting
network
available
Settings”
(ꢀ 26)
3. Connection to gateway
Fail
VQT3B11
11
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 6 :
Reprogramming the
remote control
Firmware updates
Occasionally, Panasonic may release updated firmware for
this unit that may add or improve the way a feature
operates. These updates are available free of charge.
This unit is capable of checking the firmware automatically
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following
message is displayed.
For other Panasonic products
If you have more than one Panasonic player/recorder and
the remote control operates both products at once, you will
need to change the remote control code on one product to
prevent this occurrence. (ꢀ 27, “Remote Control”)
New firmware is available.
Please update firmware in Setup.
To update the firmware
Press [HOME] ꢀ select “Setup” ꢀ select “Player
Settings” ꢀ select “Others” ꢀ [OK] ꢀ select “Firmware
Update” ꢀ [OK] ꢀ select “Update Now”
For TV
You can operate the TV using the unit’s remote control.
DO NOT DISCONNECT the unit from the AC power or
perform any operation while the update takes place.
After the firmware is installed, “FInISH” will be displayed on
the unit’s display. Unit will restart and the following screen
will be displayed.
1 Input the 2-digit code (ꢀ 32) with the
number buttons while pressing [Í TV].
e.g., 01: [0] ꢀ [1]
2 Test by turning on the television.
The firmware has been updated.
Current Version:x.xx
≥ If your television brand has more than one code listed, select the one
OK
that allows correct operation.
RETURN
≥ If downloading on this unit fails or this unit is not connected to the
Internet, then you can download the latest firmware from the
following website and burn it to a CD-R to update the firmware.
(This site is in English only.)
To show the firmware version on this unit. (ꢀ 27, “System
Information”)
≥ Downloading will require several minutes. It may take longer or
may not work properly depending on the connection environment.
≥ If you do not want to check for the latest firmware version, set
“Automatic Update Check” to “Off”. (ꢀ 27)
VQT3B11
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Inserting or removing
media
HOME menu
Major functions of this unit can be operated from the HOME
menu.
Preparation
Turn on the television and select the appropriate video input
on the television.
1
≥ When inserting a media item, ensure that it is facing the
right way up.
1 Press [Í] to turn on the unit.
The Home menu will be displayed.
≥ If you connect a Panasonic product with a USB
connection cable, the setup screen may be displayed on
the connected equipment. For details, refer to the
instructions for the connected equipment.
2 Press [OK] or [3, 4, 2, 1] to select the
item.
HOME
MEDIA
Blu-ray Disc Player
SERVER
Setup
Photos
Music
Videos
≥ When a media is inserted, contents selection screen
for that media is displayed.
≥ If there are any other items, repeat this step.
≥ To return to HOME menu, select “HOME” or press
[RETURN] several times.
Play back the contents.
Disc
Videos/
(ꢀ 14, 18, 19)
Photos/
Music
≥ When multiple contents are
recorded, select the types
of contents or the title.
USB
MEDIA
(ꢀ 20)
SERVER
Player
(ꢀ 24)
Settings
Setup
USB
Management
(ꢀ 16)
To show the HOME menu
Press [HOME].
≥ Items to be displayed may vary with the media.
≥ Where necessary, set “Mixed Data Disc Option” when using a disc with
both data files (MP3, JPEG, DivX, MKV) and Video. (ꢀ 24)
VQT3B11
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing video contents
Other operations during play
These functions may not work depending on the media and
contents.
BD DVD CD USB
1 Insert the media.
Stop
When the contents menu is displayed, press
[3, 4, 2, 1] to select the item. (ꢀ 13)
Press [∫STOP].
The stopped position is memorized.
2 Press [3, 4] to select the title and press
[OK].
Resume play function
Press [1PLAY] to restart from this position.
≥ The position is cleared if the tray is opened or you press
[∫STOP] several times to display “StOP” on the unit’s
display.
∫ To show menus
≥ On BD-Video discs including BD-J, the resume play
function does not work.
You can display Top Menu, DIRECT NAVIGATOR or Pop-up
Menu.
Press [TOP MENU] or [POP-UP MENU].
≥ Press [3, 4, 2, 1] to select the item and press [OK].
Pause
Press [;PAUSE].
≥ Press [;PAUSE] again or [1PLAY] to restart play.
∫ To show the status messages
While playing, press [STATUS].
The status messages give you information about what is
currently being played. Each time you press [STATUS], the
display information may change or will disappear from the
screen.
Search/Slow-motion
Search
While playing, press [SEARCH6] or
[SEARCH5].
e.g.BD-Video
T: Title, C: Chapter, PL: Playlist
≥ Music and MP3: The speed is fixed to a single step.
Elapsed time in the title
Slow-motion
BD-Video
While paused, press [SEARCH5].
T1 C1 0:05.14
Play
0:20.52
The speed increases up to 5 steps.
Current position
Total time
≥ Press [1PLAY] to revert to normal playback speed.
Skip
≥ Signal from PAL discs is output as PAL. Signal from NTSC discs is
output as “NTSC” or “PAL60”. You can select “NTSC” or “PAL60” in
“NTSC Contents Output” for NTSC discs. (ꢀ 25)
While playing or paused, press [:] or
[9].
Skip to the title, chapter or track you want to play.
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED.
Press [∫STOP] when you have finished playback to protect the unit’s
motor, your television screen and so on.
≥ Depending on media and contents, the display may change or may not
≥ Each press increases the number of skips.
appear.
≥ DivX and MKV: Successive play is not possible.
≥ It is not possible to playback AVCHD and MPEG2 video which have
been dragged and dropped, copied and pasted to the media.
≥ To save on electricity, the unit is turned off automatically if there is no
button operation for about 30 minutes when not playing back (such as
when paused, displaying the menu, displaying still pictures, etc.).
Frame-by-frame
While paused, press [1] (;1).
≥ Press and hold to change in succession forward.
≥ Press [1PLAY] to revert to normal playback speed.
Changing audio
Press [AUDIO].
You can change the audio channel number or soundtrack
language, etc.
VQT3B11
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful functions
1 Press [OPTION].
2 Select an item, then press [OK].
While DIRECT NAVIGATOR screen is displayed
View
To play playlists.
Playlists
View Titles To select the title.
Folder
To switch to another folder.
While playing
Top Menu
To display Top Menu.
To display Pop-up Menu.
To display Menu.
Pop-up
Menu
Menu
≥ Depending on the media and contents, displayed items are different.
∫ Displaying subtitle text
[Except\for\Asia[
You can display subtitle text on the DivX and MKV video disc
with this unit.
The operation might be different or it may not operate
properly depending on the way the file was made or the
state of this unit (playing, stopped, etc.).
Set “Subtitle” in “Disc” (ꢁ 22)
≥ DivX and MKV video files that do not display “Text” do not contain
subtitle text.
≥ If the subtitle text is not displayed correctly, try changing the language
settings. (ꢀ 24)
≥ This function has no relation to the subtitles specified in DivX standard
specifications and has no clear standard.
VQT3B11
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying BD-Live or
picture-in-picture in BD-Video
Playing picture-in-picture
To turn on/off secondary video
Press [PIP].
Enjoying BD-Live discs with
Internet
Secondary video
BD-Live allows you to enjoy more functions such as
subtitles, exclusive images and online games by connecting
this unit to the Internet. Since most of the BD-Live
compatible discs are played back using the BD-Live
function, additional contents are required to be downloaded
into the external memory (local storage).
≥ This unit uses a USB device as a local storage device.
BD-Live function cannot be used when there is no USB
device inserted.
1 Perform network connection and
settings. (ꢀ 9, 11)
Primary video
To turn on/off secondary audio
2 Insert a USB memory with 1 GB or more
free space.
[DISPLAY] ꢀ select “Disc” ꢀ [1] ꢀ select
“Signal Type” ꢀ [OK] ꢀ set “Soundtrack” in
“Secondary Video” to “On” or “Off”
3 Insert the disc.
∫ Deleting data on the USB device
≥ The usable functions and the operating method may vary with each
disc, please refer to the instructions on the disc and/or visit their
website.
≥ Some BD-Live content available on the Blu-ray discs may require an
Internet account to be created in order to access the BD-Live content.
Follow the screen display or instruction manual of the disc for
information on acquiring an account.
If you no longer need data recorded on the USB device, you
can delete data with the following operation.
1
2
3
4
5
Insert a USB device.
Press [HOME].
≥ “BD-Live Internet Access” may need to be changed for certain discs
(ꢀ 24).
Press [OK] to select “Setup”.
Press [1] to select “USB Management”.
Press [OK].
≥ When discs supporting BD-Live are played back, the player or disc IDs
may be sent to the content provider via the Internet.
≥ During search/slow-motion or frame-by-frame, only the primary video is
displayed.
≥ When “BD-Video Secondary Audio” in “Digital Audio Output” is set to
USB Management
“Off”, secondary audio will not be played (ꢀ 25).
No. of Files
Free space 1844 MB
1
USB device
BD-Video Data Erase
OK
RETURN
6
7
Press [2, 1] to select “Yes” and press [OK].
Press [2, 1] to select “Start” and press [OK].
VQT3B11
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Regarding DivX
ABOUT DIVX VIDEO:
DivX® is a digital video format created by DivX, Inc. This is
an official DivX Certified® device that plays DivX video. Visit
divx.com for more information and software tools to convert
your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified® device must be registered in order to
play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD
section in your device setup menu.
Go to vod.divx.com for more information on how to complete
your registration.
≥ Video images of the copyright-protected DivX contents
stored on USB device can be output only through the
HDMI output terminal.
Display the unit’s registration code.
(ꢀ 27, “DivX Registration” in “Others”)
DivX Registration
You must register this unit to play
protected DivX videos.
The registration code is necessary to
register this unit.
Registration Code: XXXXXXXXXX
10 alphanumeric
characters
≥ After playing DivX VOD content for the first time, the
registration code is not displayed.
≥ If you purchase DivX VOD content using a registration
code different from this unit’s code, you will not be able to
play this content.
Cancel the unit’s registration.
(ꢀ 27, “DivX Registration” in “Others”)
Press [2, 1] to select “Yes” in “DivX Registration”.
Use the deregistration code to cancel the registration in
Regarding DivX VOD content that can only
be played a set number of times
Some DivX VOD contents can only be played a set number
of times. When you play this content, the number of times
already played and initially playable number of times is
displayed.
≥ The remaining number of plays decreases each time a
programme is played. However, when playing from the
point where play was previously stopped, the remaining
number of plays does not decrease due to the resume
play function.
VQT3B11
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing still pictures
Useful functions
BD DVD CD USB
1 Press [OPTION].
(BD-RE, DVD-R/-R DL, CD-R/RW, USB device)
2 Select an item, then press [OK].
While Photo View screen is displayed
1 Insert the media.
Folder
To select the still pictures in another folder.
When the contents menu is displayed, press
[3, 4, 2, 1] to select the item. (ꢀ 13)
Start
You can display still pictures one by one at
a constant interval.
Slideshow
2 Press [3, 4, 2, 1] to select the still
picture and press [OK].
Display Interval
Change the display interval.
Transition Effect
Set display method.
Repeat Play
DIRECT NAVIGATOR
USB ( JPEG )
Photo View
Slideshow
Setting
Repeat slideshow.
0001
0005
0009
0004
Press [3, 4, 2, 1] to select “Set” and
press [OK].
Page 001/001
While playing
Play
RETURN
OPTION
Rotate
RIGHT
Press [2, 1] to display the previous or next still picture.
Rotate the still picture.
Rotate
LEFT
To exit the screen
Press [TOP MENU].
≥ Depending on the condition of the unit and media contents, displayed
items are different.
≥ When a still picture with large number of pixels is played, the display
interval may become longer. Even if the setting is changed, the display
interval may not become shorter.
∫ To show the still picture properties
While playing, press [STATUS] once or twice.
Shooting date
Date 11.12.2007
Total
3/9
To exit the screen
Press [STATUS].
VQT3B11
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing music
DVD CD USB
(DVD-R/-R DL, music CD, CD-R/RW, USB device)
1 Insert the media.
When the contents menu is displayed, press
[3, 4, 2, 1] to select the item. (ꢀ 13)
2 Press [3, 4] to select the track and press
[OK].
0.09
4.30
DIRECT NAVIGATOR
CD
Music list
Track01
5 Tracks / Total Play Time 20min54sec
No.
Track Name
Play Time
4min30sec
3min41sec
4min30sec
3min11sec
5min 2sec
001
002
003
004
005
Track01
Track02
Track03
Track04
Track05
Play
RETURN
“
” indicates the track currently playing.
To exit the screen
Press [TOP MENU].
Playing a track in another
folder
1
While DIRECT NAVIGATOR screen is displayed
Press [OPTION].
2 Press [3, 4] to select “Folder” and press
[OK].
≥ You cannot select folders that contain no compatible tracks.
VQT3B11
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing back contents
on the DLNA server
(DLNA)
For details about the setting and operation method of
connected equipment, and compatible equipment,
refer to the following Website and the operating
instructions for each item of equipment.
(This site is in English only.)
You can enjoy viewing video, still pictures and music saved on a
DLNA Certified media server (Windows 7 operating system, etc.)
connected to the home network with this unit.
1 Press [MEDIA SERVER].
≥ A list of equipment connected via the network is
displayed.
You can also enjoy viewing the video and still pictures
recorded in Panasonic DLNA compatible recorders (DIGA).
≥ This list can be updated by pressing the red button on
the remote control.
≥ The countries where DIGA is available are limited. Refer
to following site for availability.
e.g.
MEDIA SERVER (DLNA Client)
Preparation
1
XXXXXX
Perform network connection (ꢀ 9) and network setting
(ꢀ 11) of this unit.
2
Perform Home Network settings of the connected
equipment.
When connected to a PC with Windows 7
installed
≥ Add the contents and folder to the Windows Media®
OK
Servers found on the network are displayed.
Please select one.
RETURN
Update
Player library.
2 Press [3, 4] to select the equipment to
playback the contents, and press [OK].
≥ Playlist of Windows Media® Player can play back only
the contents that are stored in the libraries.
Regarding setting method of Windows 7 refer to its
instructions or help.
3 Press [3, 4, 2, 1] to select the item to
playback (folder), and press [OK].
≥ You may be able to use convenient functions
depending on the content by pressing [OPTION] or
[DISPLAY].
When connected to a Panasonic DLNA
compatible recorder (DIGA)
When a message requesting operation of the equipment
to be registered is displayed, perform step 1 and 2.
≥ Control Panel is displayed once the playback starts.
Operation can be performed with [3, 4, 2, 1], [OK]
and [EXIT].
Control Panel
e.g.
EXIT
Broadband router, etc.
≥ Press [OK] if the Control Panel is not displayed.
≥ Press [RETURN] to hide the Control Panel.
To exit the screen
LAN Cable
Press [EXIT], [HOME] or [TOP MENU].
DLNA Certified
media server
≥ Menu structure will be different depending on the equipment connected
to this unit. Select the contents by repeating the operation.
≥ Depending on the contents and the connected equipment, playback
may not be possible.
≥ Items displayed in grey on the display cannot be played back by this
Internet
unit.
≥ This unit cannot be played back via connected equipment.
≥ Depending on the performance of the connected PC, video frames may
be dropped during playback, or video may not playback at all.
VQT3B11
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Linked operations with
the TV
(VIERA Link “HDAVI Control™”)
What is VIERA Link “HDAVI Control”?
VIERA Link “HDAVI Control” is a convenient function
that offers linked operations of this unit, and a
Panasonic TV (VIERA) or other device under “HDAVI
Control”.
You can use this function by connecting the
equipment with an HDMI cable. See the operating
instructions for connected equipment for operational
details.
Preparation
1
2
3
Set “VIERA Link” to “On” (ꢀ 26).
(The default setting is “On”.)
Set the “HDAVI Control” operations on the connected
equipment (e.g., TV).
Turn on all “HDAVI Control” compatible equipment and
select this unit’s input channel on the connected TV so
that the “HDAVI Control” function works properly.
Also when the connection or settings are changed,
repeat this procedure.
Automatic input switching
Power on link
When play starts on the unit, the TV will automatically switch
the input channel and display the corresponding action.
Additionally when the TV is off, the TV will automatically turn
on.
Power off link
All connected equipment compatible with “HDAVI Control”,
including this unit, automatically turns off when you switch
the television off.
≥ This unit supports “HDAVI Control 1” function.
This standard is compatible with Panasonic’s conventional HDAVI
equipment.
≥ VIERA Link “HDAVI Control”, based on the control functions provided by
HDMI which is an industry standard known as HDMI CEC (Consumer
Electronics Control), is a unique function that we have developed and
added. As such, its operation with other manufacturers’ equipment that
supports HDMI CEC cannot be guaranteed.
≥ Please refer to individual manuals for other manufacturers’ equipment
supporting VIERA Link function.
VQT3B11
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Playback menu
Disc
Signal Type
1 Press [DISPLAY].
The recording method of
original video appears.
e.g., BD-Video
Video
Primary
Video
Disc
Signal Type
Select the type of audio or
language.
Play
Soundtrack
Off
Main
1ENG
Subtitle
Picture
-
-
Subtitle Style
Angle
Settings
Select on/off of images.
The recording method of
original video appears.
Video
Secondary
Video
Menus
Items
Select on/off of audio and
the language.
Soundtrack
2 Press [3, 4] to select the menu and
press [1].
Video
The recording method of original video appears.
3 Press [3, 4, 2, 1] to select the item and
press [1].
Soundtrack
Show or change the soundtrack.
4 Press [3, 4] to select the setting.
Some items can be changed by pressing [OK].
To exit the screen
Subtitle
Turn the subtitle on/off, and change the language depending
on the media.
Press [DISPLAY].
Depending on the condition of the unit (playing,
stopped, etc.) and media contents, there may be some
items that you cannot select or change.
Regarding Language : (ꢀ 32)
Subtitle Style
Select the subtitle style.
Audio channel
Select the audio channel number.
(ꢀ 14, “Changing audio”)
Angle
Select the number of the angle.
≥ Some items may be changed only on the disc specific menu. (ꢀ 14)
VQT3B11
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Play
Repeat Play
(Only when the elapsed time is being displayed on the unit’s
display.)
Select the item which you want to repeat. The items
displayed differ depending on the type of media.
Select “Off” to cancel.
Random
Select whether or not to play random.
Picture
Mode
Select the picture quality mode during play.
≥ If you select “User”, you can make further adjustments.
Press [1] to select “Picture Adjustment” and press [OK].
Progressive
Select the method of conversion for progressive output to
suit the type of material being played.
≥ If the video is disrupted when “Auto” is selected, select
either “Video” or “Film” depending on the material to be
played back.
VQT3B11
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup menu
Change the unit’s settings if necessary. The settings remain
intact even if you switch the unit to standby.
Disc
DVD-Video Ratings
Set a ratings level to limit DVD-Video play.
≥ Follow the on-screen instructions. Enter a 4-digit
password with the number buttons when the password
screen is shown.
1 Press [HOME].
2 Press [OK] to select “Setup”.
3 Press [2] to select “Player Settings”.
BD-Video Ratings
Set an age limit of BD-Video play.
≥ Follow the on-screen instructions. Enter the 4-digit
password with the number buttons when the password
screen is shown.
Player Settings
Disc
Picture
Sound
Display
Soundtrack Preference
Choose the language for audio.
TV / Device Connection
Network
≥ If “Original” is selected, the original language of each disc
will be selected.
Others
OK
≥ Enter a code (ꢀ 32) with the number buttons when you
select “Other ¢¢¢¢”.
RETURN
4 Press [3, 4] to select the menu and
press [OK].
Subtitle Preference
Choose the language for the subtitle.
5 Press [3, 4] to select the item and press
[OK].
If there are any other items, repeat these steps.
≥ If “Automatic” is selected and the language selected for
“Soundtrack Preference” is not available, subtitles of that
language will automatically appear if available on that
disc.
6 Press [3, 4, 2, 1] to select the option
and press [OK].
≥ Enter a code (ꢀ 32) with the number buttons when you
select “Other ¢¢¢¢”.
Menu Preference
Choose the language for the disc menus.
≥ There may be differences in operation methods. If this happens, follow
the on-screen instructions for the operation.
≥ Enter a code (ꢀ 32) with the number buttons when you
select “Other ¢¢¢¢”.
About the password
The following items use the same password.
Don’t forget your password.
≥ “DVD-Video Ratings”
BD-Live Internet Access (ꢀ 16)
You can restrict Internet access when BD-Live functions are
used.
≥ “BD-Video Ratings”
≥ If “Limit” is selected, Internet access is permitted only for
BD-Live contents which have content owner certificates.
Mixed Data Disc Option
Select the playback contents on discs with both data files
and Video.
≥ If “MP3/JPEG/DivX” is selected, the video menu function
is unavailable.
≥ If “BDAV/AVCHD” is selected, data file cannot be played
back.
[Except\for\Asia[
Subtitle Text
Select a suitable item according to the language used for
DivX or MKV subtitles text (ꢀ 15).
≥ This item is displayed only after playing back a file.
≥ BDAV is one of the video formats that are recorded on a BD-RE/
BD-R.(ꢀ 6)
VQT3B11
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
Picture
NTSC Contents Output
Select “PAL60” or “NTSC” output when playing NTSC discs.
On-Screen Messages
Choose whether to show status messages automatically.
[For\Asia[
On-Screen Language
Choose the language for menus and on-screen messages.
Sound
Dynamic Range Compression
Screen Saver Function
This is to prevent burn-in on the screen.
≥ When this is set to “On”:
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥ “Auto” is effective only when playing Dolby TrueHD.
If there is no operation for 10 minutes or more, DIRECT
NAVIGATOR screen switches to HOME menu
automatically.
Digital Audio Output
Press [OK] to show the following settings.
≥ While playing and pausing, etc., this function is not
available.
Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD
≥ As for Music [CD-DA] or MP3, regardless of the setting, if
there is no operation for a while, DIRECT NAVIGATOR
screen switches to the other states automatically.
Select the audio signal to output.
≥ Select “PCM”, when the connected equipment cannot
decode the respective audio format. This unit decodes
the audio format and transmits to the connected
equipment.
Front Panel Display
Changes the brightness of the unit’s display.
≥ If “Automatic” is selected the display is dimmed during
playback and bright except during playback.
≥ Not making the proper settings may result in noise.
BD-Video Secondary Audio
Software Licence
Information about the software used by this unit is displayed.
Select whether to mix or not mix the primary audio and
secondary audio (including the button click sound). (ꢀ 16)
≥ If “Off” is selected, the unit outputs the primary audio
only.
Downmix
Select the downmix system of multi-channel to 2-channel
sound.
≥ Select “Surround encoded”, when the connected
equipment supports the virtual surround function.
≥ There is no effect on “Bitstream” via HDMI AV OUT.
≥ The audio will be output in “Stereo” in the following cases:
– AVCHD playback
– Playback of secondary audio (including the button click
sound).
VQT3B11
25
Download from Www.Somanuals.com. All Manuals Search And Download.
VIERA Link
TV / Device Connection
Set to use “HDAVI Control” function when connected with
an HDMI cable to a device that supports “HDAVI Control”.
≥ Select “Off” when you do not want to use “HDAVI
Control”.
TV Aspect
Set to match the type of television connected.
When connected to a 4:3 aspect television and playing 16:9
ratio image:
Deep Colour Output
This setting is for selecting whether to use Deep Colour
Output when a television that supports Deep Colour is
connected.
The sides are cut off so
the picture fills the
4:3 Pan &
Scan
screen. When playing
BD-Video, video is
output as “4:3
Contents Type Flag
Depending on the playback content, the TV will output
adjusting to the optimal method when a TV that supports
this function is connected.
Letterbox”.
Black bands appear at
the top and bottom of the
picture.
4:3
Letterbox
TV System
Perform the setup so it matches the TV System of the
connected TV.
≥ When NTSC contents are played, they are outputted in the
signal format specified in the “NTSC Contents Output”,
irrespective of the settings here.
When connected to a 16:9 widescreen television and
playing 4:3 ratio image:
Video is displayed as a 4:3 ratio image in
16:9
the centre of the screen.
Video is displayed as a horizontally
16:9 full
stretched 16:9 image.
Network
Network Easy Setting (ꢀ 11)
HDMI Connection
Press [OK] to show the following settings:
Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
HDMI Video Format
The items supported by the connected devices are
indicated on the screen as “¢”. When any item without “¢”
is selected, the images may be distorted.
IP Address / DNS Settings
This is for checking the state of the network connection
and setting the IP address and DNS-related.
Press [OK] to show the respective setting.
≥ “Connection Speed Setting” is enabled only when
“Connection Speed Auto-Config” is turned “Off”.
≥ If “Automatic” is selected, automatically selects the
output resolution best suited to the connected television.
≥ To enjoy high-definition video up-converted to 1080p,
you need to connect the unit directly to 1080p
compatible HDTV (High Definition Television). If this unit
is connected to an HDTV through other equipment, the
other must also be 1080p compatible.
Proxy Server Settings
This is for checking the state of connection with the Proxy
server and performing settings.
Press [OK] to show the respective setting.
24p Output
When this unit is connected to a TV supporting 1080/24p
output using an HDMI cable, movies and other material
recorded at 24p are output at 24p.
≥ When BD-Video images other than 24p are played,
images are output at 60p.
≥ 24p :
MAC Address
Displays the MAC address of this unit.
A progressive image recorded at a rate of 24 frames per
second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in
accordance with the film materials.
HDMI Audio Output
This setting selects whether or not to output audio from
HDMI.
VQT3B11
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Remote Control
Change the remote control code if other Panasonic products
react to this remote control.
Quick Start
Speed of startup from standby mode is increased.
≥ Internal control unit will be powered when it is set to “On”
so compared to when the setting is “Off” the following will
occur.
– Idle power consumption will increase. (about the power
consumption ꢀ 31)
Easy Setting
You can execute basic settings (“On-Screen Language” [For[Asia]
,
“TV Aspect”, “Quick Start”)
Default Settings
This returns all values in the Setup menu and the playback menu,
except for “Remote Control”, “On-Screen Language” [For[Asia]
,
“IP Address / DNS Settings”, “Proxy Server Settings”,
“DVD-Video Ratings” and “BD-Video Ratings” etc. to the default
settings.
DivX Registration (ꢀ 17)
You need this registration code to purchase and play DivX
Video-on-Demand (VOD) content.
System Information
Display firmware version of this unit.
Firmware Update (ꢀ 12)
Press [OK] to show the following settings:
Automatic Update Check
When this equipment remains connected to the Internet, it
will check for the latest firmware version when it is turned
on and you can update it if necessary.
Update Now
You can update the firmware manually if a firmware
update is available.
VQT3B11
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Troubleshooting guide
Before requesting service, please perform
the following checks.
If the problem remains unresolved, consult
your dealer for instructions.
General operation
To return to the factory preset.
¾ Select “Yes” in “Default Settings” in the Setup menu.
(ꢀ 27)
To return all settings to the factory preset.
Do you have the latest firmware installed?
Firmware updates may be released to correct operating
irregularities that are discovered with certain movies.
(ꢀ 12)
¾
1
Reset the unit as follows:
While the unit is on, press and hold [OK], the yellow
button and the blue button on the remote control at the
same time for more than 5 seconds.
– “00 rEt” is displayed on the unit’s display.
Repeatedly press [1] (right) on the remote control or
[Í/I] on the unit until “08 FIn” is displayed on the unit’s
display.
2
3
The following do not indicate a problem with this unit:
– Regular disc rotating sounds.
– Image disturbance during search.
Press and hold [OK] on the remote control or [< OPEN/
CLOSE] on the unit for at least 4 seconds.
∫ Unit doesn’t respond to remote
The remote control doesn’t work properly.
control or front panel buttons.
¾
¾
Change the batteries in the remote control. (ꢀ 4)
The remote control and main unit are using different
codes. If “SEt ” is displayed on the unit’s display when
a button is pressed on the remote control, change the
code on the remote control. (ꢀ 30)
Disconnect the AC mains lead, wait 1 minute, then
reconnect the AC mains lead.
∫ Cannot eject disc.
The TV tuner mode is not displayed when
the TV is switched on.
The unit may have a problem.
1
While the unit is on, press and hold [OK], the yellow
button and the blue button on the remote control at the
same time for more than 5 seconds.
¾
This phenomenon may occur, depending on the TV
setting, when “Quick Start” is set to “On”.
– “00 rEt” is displayed on the unit’s display.
Repeatedly press [1] (right) on the remote control or
[Í/I] on the unit until “06 FtO” is displayed on the unit’s
display.
– Depending on the TV, this phenomenon may be prevented
by reconnecting the HDMI cable to a different HDMI input
terminal or by changing the HDMI auto connection setting.
2
3
Press [OK] on the remote control or [< OPEN/CLOSE]
on the unit.
You have forgotten your ratings password.
You want to cancel the ratings level.
¾
1
The ratings level returns to the factory preset.
While the unit is on, press and hold [OK], the yellow
button and the blue button on the remote control at the
same time for more than 5 seconds.
– “00 rEt” is displayed on the unit’s display.
Repeatedly press [1] (right) on the remote control or
[Í/I] on the unit until “03 VL” is displayed on the unit’s
display.
2
3
Press [OK] on the remote control or [< OPEN/CLOSE]
on the unit.
This unit does not recognize the USB
connection correctly.
¾
If inserted during playback the USB device may not be
recognized by this unit.
¾
Disconnect and reconnect the USB cable. If it still does
not recognize the connection, turn this unit off and on
again.
¾
¾
USB devices connected using a USB hub may not be
recognized by this unit.
If you connect USB HDD to this unit, use USB extension
cable that is supplied with the HDD.
VQT3B11
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture
Playback
The images from this unit do not appear on
the television.
Picture is distorted.
Disc cannot be played.
¾
¾
The disc is dirty. (ꢀ 4)
Check the region code. (ꢀ 7)
¾
An incorrect resolution is selected in “HDMI Video
Format”. Reset the setting as follows:
Still pictures (JPEG) do not playback
normally.
1
While the unit is on, press and hold [OK], the yellow
button and the blue button on the remote control at the
same time for more than 5 seconds.
¾
The images that were edited on the PC, such as
Progressive JPEG, etc., may not playback.
– “00 rEt” is displayed on the unit’s display.
Repeatedly press [1] (right) on the remote control or
[Í/I] on the unit until “04 PrG” is displayed on the unit’s
display.
2
3
I can’t playback BD-Live.
¾
Confirm that this unit is connected to the broadband
Internet. (ꢀ 9)
Press and hold [OK] on the remote control or [< OPEN/
CLOSE] on the unit for at least 4 seconds.
Set the item again. (ꢀ 26)
¾
¾
Confirm the “BD-Live Internet Access” settings. (ꢀ 24)
Confirm a USB device is inserted into the USB port.
(ꢀ 13)
– When Dolby Digital Plus, Dolby TrueHD, and DTS-HD
audio are not output in bitstream, select “Yes” in “Default
Settings” and make proper settings. (ꢀ 27)
¾
The unit and television are using different video
systems. Switch the setting as follows:
1
While the unit is on, press and hold [OK], the yellow
button and the blue button on the remote control at the
same time for more than 5 seconds.
Network
I can’t connect to the network.
¾
– “00 rEt” is displayed on the unit’s display.
Repeatedly press [1] (right) on the remote control or
[Í/I] on the unit until “05 P/n” is displayed on the unit’s
display.
Confirm the network connection and settings.
(ꢀ 9, 11, 26)
2
3
¾
¾
Check the operating instructions for each device and
connect accordingly.
Press and hold [OK] on the remote control or [< OPEN/
CLOSE] on the unit for at least 4 seconds.
The system switches from PAL to NTSC or vice versa.
The system used on the disc doesn’t match your television.
– PAL discs cannot be correctly viewed on an NTSC
television.
– This unit can convert NTSC signals to PAL60 for
viewing on a PAL television (“NTSC Contents Output”
in the “Picture”).
Video is not output in high-definition.
¾ Confirm that “HDMI Video Format” in the Setup menu
are set properly. (ꢀ 26)
A black band is displayed around the edge
of the screen.
The aspect ratio of the screen is abnormal.
¾
¾
Confirm the “TV Aspect” is set properly. (ꢀ 26)
Adjust the aspect setting on the television.
Audio
Cannot hear the desired audio type.
¾
Check the connections and the “Digital Audio Output”
settings.(ꢀ 9 , 25)
¾
To output audio from a device connected with an HDMI
cable, set “HDMI Audio Output” to “On” in the Setup
menu. (ꢀ 26)
VQT3B11
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
The following messages or service numbers appear on the
television or unit’s display when something unusual is
detected during startup and use.
On the television
Cannot play.
¾
You inserted an incompatible disc.
Cannot play on this unit.
You tried to play a non-compatible image.
¾
No disc is inserted.
¾
The disc may be upside down.
$ This operation is not available.
¾ Some operations are unsupported by the unit. For
example;
– Reverse slow-motion is not possible.
IP address is not set.
¾
The “IP Address” in “IP Address / DNS Settings” is “---.
---. ---. ---”. Set the “IP Address”, “Subnet Mask”, and
“Gateway Address”. (Select the automatic address
acquisition if necessary.)
On the unit’s display
SEt
(“ ” stands for a number.)
¾
The remote control and main unit are using different
codes. Change the code on the remote control.
Press and hold [OK] and the
indicated number button at the
same time for more than 5 seconds.
H
or F
(“ ” stands for a number.)
¾
¾
There is something unusual.
Check the unit using the troubleshooting guide. If the
service number does not disappear, do the following.
Disconnect the plug from the household mains socket
wait a few seconds, then reconnect it.
1
2
Press [Í/I] to turn the unit on. (The unit may be fixed.)
If the service number does not disappear despite doing the
above, request service from the dealer. Inform the dealer of
the service number when requesting service.
VQT3B11
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Signal system:
File format
PAL/NTSC
Operating temperature range:
File format
Extension
Reference
i5 oC to i35 oC
ID3 tags (Only titles and
the names of artists)
Operating humidity range:
MP3
“.MP3”, “.mp3“
10 % to 80 % RH (no condensation)
Video output:
Audio output:
1.0 Vp-p (75 ≠)/Pin jack:1 system
≥ MOTION JPEG and
Progressive JPEG is not
supported.
2 Vrms (1 kHz, 0 dB)/Pin jack
Number of connectors :
HDMI AV output: Type A (19 pin) : 1 system
This unit supports “HDAVI Control 1” function.
2 channel:1 system
≥ You may not be able to
play back the file if you
have edited the folder
structure or the file
name on a PC or other
device.
JPEG
“.JPG”, “.jpg“
USB slot:
Ethernet:
LASER Specification
USB2.0 : 1 system
10BASE-T/100BASE-TX : 1 system
Class 1 LASER Product:
Wave length:
790 nm (CDs)/655 nm (DVDs)/405 nm (BDs)
Laser power:No hazardous radiation is emitted with the
safety protection
“.DIVX”, “.divx”, ≥ [Except[for[Asia]
Power supply:
“.AVI”, “.avi”
The video file and
subtitles text file are
inside the same folder,
and the file names are
the same except for the
file extensions.
[For[Australia[and[New[Zealand]
AC 220 to 240 V, 50 Hz
[For]Asia,]Middle]East]and]India]
AC 220 to 240 V, 50 Hz/60 Hz
[Except[for[Asia]
Subtitles text file
“.SRT”, “.srt”,
“.SUB”, “.sub”,
“.TXT”, “.txt”
DivX
Power consumption:
Power consumption in standby mode:
Power consumption in quick start standby mode:
Approx. 3.6 W
Dimensions (WkDkH)
Approx. 12 W
Approx. 0.2 W
≥ Some DivX and MKV
file may not be played
back, depending on the
video resolution and
frame rate condition.
“.MKV”, “.mkv”
Including the projecting parts:
430 mmk185 mmk35 mm
Approx. 1.6 kg
[Except[for[Asia]
Subtitles text file
“.SRT”, “.srt”,
“.SSA”, “.ssa”,
“.ASS”, “.ass”
Mass:
MKV
Specifications are subject to change without notice.
≥ With certain recording states and folder structures, the
play order may differ or playback may not be possible.
Audio information
The audio output differs depending on the settings on the
unit. (ꢀ 25, Digital Audio Output)
≥ The number of channels listed is the maximum possible
number of output channels when connected to amplifier/
receiver compatible with the respective audio format.
“Digital Audio Output”
Terminal
“Bitstream”
“PCM”*2
BD-Video :
HDMI AV Outputs using original 7.1ch PCM*1
OUT
audio*1
DVD-Video :
5.1ch PCM
*1
*2
When “BD-Video Secondary Audio” is set to “On”, the audio will be
output as Dolby Digital, DTS Digital Surround or 5.1ch PCM.
The maximum possible number of Dolby sound is 2ch PCM.
VQT3B11
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplemental information
∫ TV code list
∫ Language code list
Brand
TV Code
Brand
TV Code
Language Code Language Code Language Code
Abkhazian
Afar:
Afrikaans:
Albanian:
6566 Gujarati:
6565 Hausa:
6570 Hebrew:
8381 Hindi:
6577 Hungarian:
6582 Icelandic:
7289 Indonesian:
6583 Interlingua:
6589 Irish:
7185 Rhaeto-Romance:
Panasonic
AIWA
AKAI
BEKO
BENQ
01/02/03/04
35
27/30
05/71/72/73/74
58/59
10/15
05
66
05
64/65
05
05
05
10/34
61
21
53
63/67
05/50/51
05
36
09
05/22/23/40/41
30
25
17/30/39/70
52
45
NEC
NOBLEX
NOKIA
NORDMENDE
OLEVIA
ONWA
36
33
7265
8277
7387 Romanian:
7273 Russian:
7285 Samoan:
7383 Sanskrit:
8279
8285
8377
8365
25/26/27/60/61
10
45
30/39/70
05
49/69
41/48/64
05/06/46
05
37/38
52
05
05
10
26
32/42/43/65/68
05
21/54/55/56
05/29/30
05/69/75/76/77/78
05/25
18
09
Amharic
Arabic:
:
BRANDT
BUSH
Armenian:
Assamese:
Aymara:
Azerbaijani:
Bashkir:
7378 Scots Gaelic: 7168
7365 Serbian:
8382
7165 Serbo-Croatian: 8372
ORION
PEONY
CENTREX
CURTIS
DAEWOO
DESMET
DUAL
ELEMIS
FERGUSON
FINLUX
FISHER
FUJITSU
FUNAI
GOLDSTAR
GOODMANS
GRADIENTE
GRUNDIG
HITACHI
IRRADIO
ITT
JVC
KDS
KOLIN
KONKA
LG
LOEWE
MAG
METZ
MITSUBISHI
MIVAR
6590 Italian:
7384 Shona:
7465 Sindhi:
8378
8368
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
PHILCO
PHILIPS
PHONOLA
PIONEER
PROVIEW
PYE
RADIOLA
SABA
SALORA
SAMSUNG
SANSUI
SANYO
SCHNEIDER
SEG
SELECO
SHARP
SIEMENS
SINUDYNE
SONY
TCL
TELEFUNKEN
TEVION
THOMSON
TOSHIBA
WHITE
WESTINGHOUSE
YAMAHA
6665 Japanese:
6985 Javanese:
Kannada:
6678 Kashmiri:
6890 Kazakh:
6672 Kirghiz:
6682 Korean:
6671 Kurdish:
7789 Laotian:
Basque:
Bengali; Bangla:
7487 Singhalese:
7578 Slovak:
7583 Slovenian:
7575 Somali:
7589 Spanish:
7579 Sundanese:
7585 Swahili:
7679 Swedish:
7665 Tagalog:
Bhutani:
Bihari:
Breton:
Bulgarian:
Burmese:
Byelorussian: 6669 Latin:
Cambodian:
Catalan:
Chinese:
Corsican:
Croatian:
Czech:
7577 Latvian, Lettish: 7686 Tajik:
6765 Lingala:
9072 Lithuanian:
6779 Macedonian:
7282 Malagasy:
6783 Malay:
6865 Malayalam:
7876 Maltese:
6978 Maori:
6979 Marathi:
6984 Moldavian:
7079 Mongolian:
7074 Nauru:
7678 Tamil:
7684 Tatar:
7775 Telugu:
7771 Thai:
7783 Tibetan:
7776 Tigrinya:
7784 Tonga:
7773 Turkish:
7782 Turkmen:
7779 Twi:
7778 Ukrainian:
7865 Urdu:
7869 Uzbek:
7879 Vietnamese:
7982 Volapük:
Danish:
Dutch:
English:
Esperanto:
Estonian:
Faroese:
Fiji:
Finnish:
French:
Frisian:
Galician:
Georgian:
German:
Greek:
Greenlandic:
Guarani:
05
08
31/33/66/67/69
10/11/12/13/14
52
10/15/44
16/57
62
05/50/51
07/46
52
05/28/79
05/19/20/47
24
7073 Nepali:
7082 Norwegian:
7089 Oriya:
7176 Pashto, Pushto: 8083 Welsh:
05
7565 Persian:
6869 Polish:
6976 Portuguese:
7576 Punjabi:
7178 Quechua:
7065 Wolof:
8076 Xhosa:
8084 Yiddish:
8065 Yoruba:
8185 Zulu:
18/41
∫ Display languages list
∫ Unit’s display list
Display Language Display Language Display Language
This list only contains displays that are difficult to read.
ENG
FRA
DEU
ITA
ESP
NLD
SVE
NOR
DAN
POR
RUS
English
French
German
Italian
Spanish
Dutch
JPN
CHI
KOR
MAL
VIE
Japanese
Chinese
Korean
Malay
Vietnamese
Thai
ARA
HIN
Arabic
Hindi
Display
Reading
Display
Reading
PER
IND
Persian
Indonesian
Maori
Bulgarian
Romanian
Greek
BYE
OPEN
PLAY
MRI
BUL
RUM
GRE
TUR
THA
POL
CES
SLK
HUN
FIN
READ
STOP
Swedish
Norwegian
Danish
Portuguese
Russian
Polish
Czech
Slovak
Hungarian
Finnish
SETUP
F99
Turkish
Others
NET
No PLAY
No UPDATE
START
FINISH
P-LIST
SET
*
UPD -5*
STILLP
SLIDE
REPEAT
No PLAY
UNLOCK
DISC
No DISC
No READ
BD-J
UNSUPPORT
* “ ” stands for a number.
VQT3B11
32
Download from Www.Somanuals.com. All Manuals Search And Download.
c-arse license
This product incorporates the following software:
(1) the software developed independently by or for Panasonic
Corporation,
Copyright 1998 by the Massachusetts Institute of Technology.
(2) the software owned by third party and licensed to Panasonic
Corporation,
(3) the software licensed under the GNU General Public License,
Version 2 (GPL v2),
(4) the software licensed under the GNU LESSER General Public
License, Version 2.1 (LGPL v2.1) and/or,
(5) open sourced software licensed under its applicable license terms
including but not limited to
Permission to use, copy, modify, and distribute this software and its
documentation for any purpose and without fee is hereby granted,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation, and that the name of M.I.T. not be used in
advertising or publicity pertaining to distribution of the software without
specific, written prior permission.
M.I.T. makes no representations about the suitability of this software
for any purpose. It is provided “as is” without express or implied
warranty.
ICU License, c-arse license.
For the software categorized as (3) and (4), please refer to the terms
and conditions of GPL v2 and LGPL v2.1, as the case may be at
In addition, the software categorized as (3) and (4) are copyrighted by
several individuals. Please refer to the copyright notice of those
individuals at
The GPL/LGPL software is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY, without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
At least three (3) years from delivery of products, Panasonic will give to
any third party who contacts us at the contact information provided
below, for a charge no more than our cost of physically performing
source code distribution, a complete machine-readable copy of the
corresponding source code covered under GPL v2/LGPL v2.1.
Contact Information
Source code is also freely available to you and any other member of
the public via our website below.
For Open Source Software Programs categorized as (5), please refer
to the applicable license terms listed below and/or included in the
“License” menu on Product.
ICU License - ICU 1.8.1 and later
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1995-2010 International Business Machines Corporation
and others
All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the
“Software”), to deal in the Software without restriction, including without
limitation the rights to use, copy, modify, merge, publish, distribute,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, provided that the above copyright
notice(s) and this permission notice appear in all copies of the
Software and that both the above copyright notice(s) and this
permission notice appear in supporting documentation.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD
PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER
OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY
CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL
DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM
LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF THIS SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall
not be used in advertising or otherwise to promote the sale, use or
other dealings in this Software without prior written authorization of the
copyright holder.
All trademarks and registered trademarks mentioned herein are the
property of their respective owners.
VQT3B11
33
Download from Www.Somanuals.com. All Manuals Search And Download.
-If you see this symbol-
Information on Disposal in other Countries outside
the European Union
This symbol is only valid in the European
Union.
If you wish to discard this product, please
contact your local authorities or dealer and
ask for the correct method of disposal.
VQT3B11
34
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
VQT3B11
35
Download from Www.Somanuals.com. All Manuals Search And Download.
(Inside of product)
p
Panasonic Corporation
Web Site: http://panasonic.net
VQT3B11
F0211DT0
C Panasonic Corporation 2011
Download from Www.Somanuals.com. All Manuals Search And Download.
|