Panasonic Cell Phone EB GD95 User Manual

Operating Instructions  
Digital Cellular Phone  
EB-GD95  
Before operating this equipment please read these instructions  
completely.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Getting Started  
Thank you for purchasing this Panasonic digital cellular phone. This  
phone is designed to operate on the Global System for Mobile  
Communications (GSM), GSM900 or GSM1800. Ensure the battery  
is fully charged before use.  
Before operating this phone please read the “Important  
Information” section - see page 67.  
These operating instructions detail use of the equipment contained in  
the Main Kit. Some services detailed, are network dependent or may  
only be available on a subscription basis. Some functions are SIM  
dependent. For more information contact your Service Provider.  
Fitting the SIM  
The SIM is inserted into the back of  
the phone underneath the battery.  
First, remove the battery - see  
“Removing the Battery” page 2.  
Place the SIM in the recess at the  
rear of the phone (1) ensuring the  
bevelled corner is positioned in the  
top left corner. Slide the SIM fully  
down (2) using light pressure until  
the SIM retaining clip has clicked into  
position (3).  
Removing the SIM  
Ensure the SIM retaining clip is  
pressed down (1) and while holding  
this down slide the SIM upwards (2).  
Once clear of the SIM recess, the  
SIM can be removed.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting Started  
Fitting the Battery  
Locate the lugs in the top of the  
battery into the rear of the phone (1).  
Using light pressure, push the  
bottom of the battery into place until  
it locks into position (2).  
Œ

Removing the Battery  
Push the battery release latch down  
(1). The base of the battery will raise  
out of the recess (2). The battery can  
now be removed from the phone (3).  
Ž
Œ
Charging the Battery  
Connecting the Travel Charger  

The battery must be attached to the  
phone before the charger is  
connected. Ensuring the arrows on  
the plug are to the front of the phone  
insert the charger into the base of  
the phone.  
Note: DO NOT force the connector  
as this may damage the phone  
and/or the charger.  
Connect the charger to the mains  
power supply and switch on. The  
charging indicator will light and the battery level indicator will scroll  
right to left when charging.  
Operation of Battery Level Indicator  
While charging  
Charging complete  
H
Phone on  
Phone off  
K
K
Indicator off  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting Started  
When charging is complete turn off the mains power supply and  
disconnect the charger from the phone. See “Disconnecting the  
Travel Charger” below.  
Disconnecting the Travel Charger  
Turn off the mains power supply and  
disconnect the charger.  
Squeeze together the two buttons on  
the plug of the charger (1) and while  
maintaining pressure extract the plug  
from the base of the phone (2).  
Low Battery Warning  
When the battery power is low a warning tone will sound and a  
flashing LOW BATTERY message will be displayed. If this occurs  
during conversation finish your call immediately. The power will be  
automatically shut off shortly after the warning tone. Fully charge the  
battery or replace it with a fully charged one. (Calls can be made and  
received while the phone is charging)  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Getting to Know Your Phone  
Location of Controls  
Antenna  
Incoming/Charging  
Indicator  
Earpiece  
Earphone/Microphone  
Socket  
Display  
Microphone  
External Connector  
g
Navigation key - moving up/down/left/right navigates  
through the options in the Main Display area. Pressing this  
key activates the function currently displayed in the Main  
Option area  
B
A
Cancel key - this key is mainly used to cancel the current  
operation and return to the previous menu level. In certain  
menus it has other functions.  
Primarily used for accessing the Phonebook or switching  
character types. Also used for accessing the Browser menu  
D
E
Makes a call or recalls recently dialled phone numbers  
Ends a call or switches the phone on/off when pressed and  
held  
1
Digit keys 0 to 9, * and # – the # key will  
switch on and off vibration alert  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting Started  
Display Icons  
Status Icons  
Main Display  
Status Icons  
Cancel Icon  
Information Area  
Navigation Prompt  
Main Option Area  
Status Icons  
The status icons are displayed according to the currently activated  
functions. The Antenna, Signal and Battery icons are always  
displayed when the handset is switched on and connected to a  
network.  
Y
lights when you are registered to a non-home network -  
roaming  
t
lights when call divert is enabled  
]
[
lights when vibration alert is enabled  
lights when all tones or ring volume is off  
N
flashes when an unread message is stored or lights when  
message area is full  
O
S
lights when phone lock is enabled  
indicates that it is possible to make emergency calls  
T
indicates the received signal strength: \ - weak signal, T -  
strong signal  
H
indicates the battery level: H - full, G (flashing) - low  
battery  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Information  
Icons are used to indicate the current top level menu, the sub-menu  
number, text entry mode, Phonebook source, Phonebook location  
number, or the alarm set icon depending on the current mode of  
operation.  
?
>
indicates alarm is set  
indicates current Phonebook entry is sourced from the  
Mobile Phonebook  
<
indicates current Phonebook entry is sourced from the SIM  
Phonebook  
Navigation Prompt  
p
This area indicates the available directions in which the  
Navigation key can be pressed according to the current  
mode of operation.  
Using the Menu System  
The menu system provides the means for accessing all the functions  
which do not have their own dedicated buttons on the keypad.  
The menu functions are selected using the five-way Navigation key.  
To Select a Function  
Press the Navigation key (Q) and then use it as a joystick to move  
around the icons on the screen in any of the four directions (a, b, c,  
d). Once a particular menu is highlighted press the Navigation key  
(Q), and a submenu is displayed. From any submenu, use e until  
the required item is highlighted, then press Q.  
Example:  
From Idle mode press Q, select Personalise > Display  
Setting > Backlight Colour and press Q  
In detail:  
1
2
3
4
Press the Navigation key (Q) to enter the menu system  
Use db to highlight the Personalise menu  
Press Q to enter the menu  
Use a three times to highlight the Display Setting menu  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Getting Started  
5
6
7
8
Press Q to enter the menu  
Use a twice to highlight the Backlight Colour menu  
Press Q to enter the menu  
Use ab to select desired screen colour and press Q  
Following some operations the display will automatically clear after  
three seconds, if this is not the case press E to return to Idle  
mode.  
Shortcuts  
In addition, once you are familiar with the layout of the menu you can  
use the keypad to enter the Menu Number to quickly obtain the  
required function. For example, press Q to enter the menu and then  
143 to take you directly to the menu for changing the  
Backlight Colour.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operation  
Basic Operation  
Switching the Phone On/Off  
To switch the phone on or off.  
Press and hold E to switch power on  
A greeting will be displayed and then the phone will  
go into Idle mode.  
Press and hold E to switch power off  
Making a Call  
Ensure that the phone is switched on, the network operator logo is  
displayed and the signal strength meter shows network coverage is  
available in the current area.  
1
2
Enter area code and phone number  
Press D  
International Dialling  
Using the automatic international access code (+) you will be able to  
dial international numbers without having to know the code for the  
international exchange.  
If the international number is known then it can be entered in the  
normal fashion followed by the area code and phone number.  
1
2
Press and hold 0 until + is displayed  
Use e to cycle through the abbreviated  
international names and press Q to select the  
required code  
3
4
Enter area code and phone number  
Press D  
Note: Many countries include an initial “0” in the area code. This  
should, in most cases, be omitted when dialling international  
numbers. If you have difficulties making international calls, contact  
your Service Provider.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Basic Operation  
Emergency Calls  
To make an emergency call the antenna symbol (S) must be present.  
Enter 112 D or if no SIM is fitted to the phone press  
QaQ  
Automatic Redial  
When a call is unsuccessful you may want the phone to redial  
number again automatically.  
When your connection is unsuccessful, Press Q when Ok is  
displayed and a timer will countdown in seconds to the next  
redial  
To stop redialling, press Q when Cancel is displayed in the  
main option area or B when C is displayed in the secondary  
option area  
When a call is connected a beep will be emitted.  
If a call is repeatedly unsuccessful you will not be able to  
automatically redial the phone number. In this case you must redial  
the phone number manually.  
Ending a Call  
Press E  
Answering a Call  
To receive a call the phone must be switched on and the signal  
strength meter must be displayed.  
Press any key except E or the Navigation key Q to answer  
a call  
Press E to reject the call  
If Q is pressed, you will be given the option to Accept or Reject the  
call. Use e to select an option and press Q.  
If a call is not answered, or is rejected, the number of unanswered  
calls will be displayed.  
Press any key to clear the display  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Basic Operation  
Caller Identification  
This feature allows you to identify incoming calls and accept or reject  
them. The caller’s phone number, and name if stored in Phonebook,  
will be displayed.  
Note: Caller Identification may not always be available.  
Earpiece Volume Control  
The volume level may be adjusted during a call:  
Use a to decrease the volume  
Use b to increase the volume  
Volume control for Personal Handsfree accessory is adjusted in the  
same manner.  
Locking the Phone  
With the Phone Lock enabled you will be restricted to answer  
incoming calls and make emergency calls only. The Phone Lock  
Code is factory set to “0000”.  
1
From Idle mode press Q, select Phone Menu  
> Security > Phone Lock and press Q  
2
Enter the 4-digit code and press Q  
The phone will be locked and the lock icon (O) will  
be displayed.  
Unlocking the Phone  
To restore normal operation, enter your Lock Code and press Q.  
The lock icon will be removed from the display. However, once you  
turn the phone off and on again you will need to re-enter the Lock  
Code, and when the correct code has been entered Ok will be  
displayed. Press Q.  
Disabling Phone Lock  
The phone must be unlocked before the phone lock can be disabled.  
1
From Idle mode press Q, select Phone Menu > Security >  
Phone Lock and press Q  
2
3
Select Disable press Q  
Enter the 4-digit code and press Q  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Basic Operation  
Using the PIN  
The PIN (Personal Identification Number) protects your SIM against  
unauthorized use. If you enable the PIN, every time the phone is  
turned on you will be prompted to enter the PIN.  
The PIN2 controls security for the Fixed Dial Store, Call Charge  
metering and Barred Dial.  
Enabling/Disabling the PIN  
1
2
3
From Idle mode press Q, select Phone Menu > Security >  
PIN and press Q  
Use a select Enable / Disable or Change the PIN and press  
Q
Enter PIN (Between 4 and 8 digits) and press Q  
Setting Vibration Alert  
When vibration alert is switched on the phone will vibrate when a call  
is received. Switching on vibration alert will silence the ring volume.  
If, however, the ring volume is adjusted after the vibration alert is  
switched on, the phone will ring and vibrate when a call is received.  
From Idle mode:  
Press and hold # to switch on or off. When activated, the  
phone will vibrate briefly.  
Setting Ring and Key Volume  
Changing either the ring volume and key volume is done in the same  
manner. If you increase the ring volume above maximum it will set an  
escalating ring tone. If you turn the ring volume off, the silent  
indicator icon ([) will be displayed.  
1
From Idle mode press Q, select Personalise > Tones and  
press Q  
2
3
Select Ring Volume or Key Volume and press Q  
Use e to set the volume level and press Q  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Phonebook  
Phonebook  
Phone numbers can be stored in two locations. You can store  
numbers in the SIM Phonebook (therefore the number of locations,  
length of name and number of phone numbers are SIM dependent).  
Alternatively you can store phone numbers in the Mobile Phonebook,  
this means that if you change the SIM the numbers in the phone are  
not lost.  
The Mobile Phonebook has the advantage that you can group your  
phonebook entries together.  
Store a Number  
To Store a Number in the SIM Phonebook  
1
From Idle mode enter the phone number and  
press A  
2
3
To select SIM Phonebook press Q  
Enter the name – see “Text Entry” page 61,  
and press Q twice  
4
Enter location number and press Q  
You can choose not to enter a location number and the entry will be  
placed in the next available location. Simply press Q when Any is  
displayed.  
To Store a Number in the Mobile Phonebook  
1
2
3
4
From Idle mode enter the phone number and press A  
Use a to select MobilePhonebook and press Q  
Enter the name - see “Text Entry” page 61, and press a  
Confirm phone number and press Q twice  
If you wish to store an e-mail address with the current number then  
after confirming the number use a, enter the mail address and press  
Q twice.  
5
Use e to select a group - see “Grouping Phonebook Entries”  
page 15 - into which to place the entry and press Q  
6
Enter location number and press Q  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Phonebook  
You can choose not to enter a location number and the entry will be  
placed in the next available location. Simply press Q when Any is  
displayed.  
Overwrite Protection  
If a location is occupied you will be prompted to confirm that you wish  
to overwrite the current information.  
Press Q to overwrite the selected location  
Press B to choose another location number  
Note: If you amend an entry stored in your phonebook that has a  
Voice Dial Command assigned to it, you will need to delete and  
reassign that Voice Dial Command - see “Editing the Voice Dial  
Entries” page 23.  
Browsing Phonebook  
You can search the Phonebook by either Name or Location. The  
default setting for browsing is by name. When browsing by name  
pressing a lettered key will take you to the first entry starting with that  
letter.  
1
2
3
From Idle mode press Q, select Phonebook > Browse and  
press Q  
Use e to toggle between Names or Location Numbers  
display mode and press Q  
Use e to select the Phonebook you wish to browse and press  
Q
Retrieve a Number  
From Idle mode:  
1
2
Press A  
Use e to browse through the Phonebook  
Once you have selected a phone number or name, there are a  
number of actions that you can perform. To dial the selected number  
press D.  
Note: The Phonebook you last viewed will be the default when you  
next press A. To change the default, use the Phonebook menu to  
select a particular phonebook.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Phonebook  
Speed Dial a Number Stored in SIM Phonebook  
1
2
3
Enter location number – leading zeros may be left out  
Press #  
Press D  
Editing Phonebook Entries  
You can Detail, View, Recall, Edit, Delete or Create in the  
Phonebook. To access any of these functions you follow the same  
procedure. With a phone number or name displayed:  
1
Use e to cycle through Detail, View, Recall, Edit, Delete or  
Create  
2
Press Q to select an option  
Detail  
Displays each element of the selected Phonebook entry. Use e to  
display the next/previous element of the entry. Each element may be  
edited - Press QaQ, edit as required and press Q twice to save  
any changes.  
View  
Displays an individual name and phone number in the names list.  
If an e-mail address is present in the Mobile Phonebook this will be  
displayed along with the name and number.  
Recall  
Displays the phone number, enabling you to either change it or call  
the number.  
Edit  
Displays the entry allowing you to make changes as required. Press  
Q twice to save any changes.  
Delete  
Deletes the entry from the Phonebook.  
Create  
Creates a new entry in the Phonebook  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Phonebook  
Grouping Phonebook Entries  
The ability to group phonebook entries together is an extra function  
of the Mobile Phonebook.  
Retrieving a Number from a Group  
Groups are used to collect together types of Phonebook entries, for  
example business and personal. Each group can be suitably titled for  
quick access to the entries contained within.  
An alert profile can be attributed to groups, or a phone number, thus  
allowing incoming calls to be tailored to indicate the type of caller.  
1
From Idle mode press Q, select Phonebook > Group  
Setting and press Q or from Idle mode press A twice  
2
3
Use e to select the group and press Q twice  
Use e to select the entry required and press Q twice to recall  
the number.  
Retitling Group Names  
1
From Idle mode press Q, select Phonebook > Group  
Setting and press Q  
2
3
4
5
Use e to select the group required and press Q  
Use e to select Edit and press Q  
Clear the current title and re-enter - see “Text Entry” page 61  
Press Q twice to save any changes  
Using Alert Profiles  
Alert Profile enables you to identify callers with a particular ring tone,  
display picture and backlight colour, making it easier to distinguish  
between callers or groups of callers.  
Creating an Alert Profile  
1
From Idle mode press Q, select Phonebook > Alert Profile  
and press Q  
2
3
4
Press Q insert a new profile  
Use e to select Personal or Group and press Q  
Recall the phone number / select group from the Phonebook –  
see “Retrieve a Number” page 13 and press Q  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Phonebook  
5
6
Press Q  
Use e to select the ring tone that you wish to use for this profile  
and press Q  
7
8
Use e to select the picture and press Q  
Use e to select the backlight colour and press Q  
Hot Key Phone Numbers  
It is possible to dial phone numbers from the Phonebook or Service  
Dial part of Phonebook very quickly. Some Hot Key Phone numbers  
may be reserved by the Service Provider, for example the first three  
Hot Key Phone numbers may be linked to Service Dial (network  
dependent).  
1
2
Press and hold a Digit key 1 to 9  
Press D  
Setting the Hot Key Dial Source  
1
From Idle mode press Q, select Phonebook > Hot Key Dial  
and press Q  
2
Use e to select SIM Phonebook or MobilePhonebook and  
press Q  
Service Dial Numbers  
Your Service Provider may program some special phone numbers  
into your SIM (network dependent). It is not possible to modify the  
Service Dial numbers.  
1
2
Press and hold A  
Press e to browse through the Service Dial list of phone  
numbers  
The phone number pointed to can only be recalled or dialled.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Phonebook  
Review the Phonebook  
The Review function in the Phonebook menu shows how many  
locations are available in the Phonebook.  
1
2
From Idle mode press Q, select Phonebook > Review and  
press Q  
Use e to select SIM Phonebook or MobilePhonebook and  
press Q  
A summary of the selected Phonebook will be displayed.  
3
Use e to gain a detailed view of the Phonebook locations.  
Occupied locations are shown with “w”.  
My Numbers  
My Numbers is a convenient part of Phonebook where your voice,  
fax and data phone number(s) can be stored and viewed. This  
function is SIM dependent.  
Adding Numbers  
1
From Idle mode press Q, select Phonebook > My Numbers  
and press Q twice  
2
3
Use e until Create is displayed and press Q  
Enter the name - see “Text Entry” page 61, and use a  
Note: If using T9® text input then move c before moving a  
otherwise an alternative word will be selected  
4
5
Enter the phone number and press Q twice  
Enter location number and press Q  
Viewing Stored Numbers  
1
From Idle mode press Q, select Phonebook > My Numbers  
and press Q  
2
If more than one number is available then use e to cycle  
through the listed numbers  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Personalising Your Phone  
Personalising Your Phone  
Add a Start-up Greeting  
A personalised greeting can be programmed for when the phone is  
switched on.  
1
From Idle mode press Q, select Personalise > Display  
Setting > Greeting and press Q  
2
Use the text entry facility to add your greeting and press Q  
twice - see “Text Entry” page 61  
Displaying Animations  
Animations can be displayed when the phone is switched on.  
1
From Idle mode press Q, select Personalise > Display  
Setting > Animation and press Q  
2
3
Use e to cycle through the animated themes available  
Press Q to select either the desired theme, or disable the  
animation  
Changing the Ring Tone  
The ring tones of the phone can be changed to one of many  
pre-defined sounds or to a voice ringer (a voice recording used as a  
ring tone).  
Each of voice, fax, data and message can have a different ring tone.  
Alternatively you can use the Melody Composer to generate your  
own ring tone.  
Setting up a Pre-defined Ring Tone  
You can choose from a selection of tones and  
melodies.  
1
2
3
From Idle mode press Q, select Personalise  
> Tones > Ring Type and press Q  
Use e to select the appropriate call type to be  
changed and press Q  
Use e to select the desired ring tone and press  
Q
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Personalising Your Phone  
Recording a Voice Ringer  
1
2
3
From Idle mode press Q, select Personalise > Tones >  
Voice Ringer and press Q  
Use e to select the appropriate voice ringer to be changed and  
press Q  
Press Q and start speaking into the microphone to record  
your voice. The recording will stop automatically, or before if  
Q is pressed.  
4
To playback the recording use e to select the appropriate voice  
ringer press Q, select Playback and press Q  
Composing a Melody  
From Idle mode press Q, select Personalise > Tones >  
Melody Composer and press Q  
Using the following table as reference, enter the notes (from the  
choice of low, middle and high), rests, and the durations of each, to  
generate your composition.  
At any time during composing press A to play back the  
current melody.  
Once the composition is complete press Q twice to save it.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Personalising Your Phone  
1st  
2nd  
3rd  
4th  
5th  
6th  
Key  
press  
press  
press  
press  
press  
press  
1
2
C
D
E
F
C#  
low C  
low D  
high E  
low F  
low G  
low A  
low C# high C high C#  
low D# high D high D#  
D#  
3
low E  
F#  
4
low F#  
high F high F#  
5
G
A
B
G#  
low G# high G high G#  
6
A#  
low A#  
high A high A#  
7
low B  
8
9
0
rest  
1/8  
1/2  
* (duration)  
# (duration)  
1/16  
1/1  
1/1  
1/2  
1/8  
1/4  
1/4  
1/16  
Editing your Melody  
Once the melody has been saved the following operations can be  
used for re-editing purposes:  
Press B to delete the character to the left of the cursor  
Use g to navigate the cursor around the screen  
Use the relevant keys to insert new notes/rests  
Disabling all Tones  
1
From Idle mode press Q, select Personalise > Tones and  
press Q  
2
Press Q to disable all tones. When Idle mode is resumed the  
silent indicator icon ([) will be displayed.  
Repeat the process to enable all tones.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Personalising Your Phone  
Download Melody  
Melodies may be downloaded to the phone via short text messages.  
Downloaded melodies overwrite pre-defined ring tone numbers  
16-20.  
When a message has been received containing a melody:  
1
2
Press Q to acknowledge receipt of the melody  
Use e to select the ring tone number to overwrite and press Q  
twice  
The melody is now stored and can be selected as a pre-defined ring  
tone.  
Setting the Backlight Colour  
1
From Idle mode press Q, select Personalise > Display  
Setting > Backlight Colour and press Q  
2
3
Use e to cycle through the colours available  
Press Q to select the desired colour  
Setting the Backlight Time  
1
From Idle mode press Q, select Personalise > Display  
Setting > Backlight Time and press Q  
2
3
Use e to cycle through the times available  
Press Q to select the desired time  
Using Voice Commands  
Before you can use any of the phone’s voice activated functions you  
will need to configure the phone so that it will recognize your own  
voice and intonation.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Personalising Your Phone  
Voice Dial Entry Setup  
This function allows you to recall and dial numbers from your  
Phonebook using voice commands.  
1
From Idle mode press Q, select Personalise > Voice  
Command > Voice Dial and press Q  
2
3
Press Q to add a new Voice Dial entry to the list  
Browse through the Phonebook to select an entry which you  
wish to attribute a voice command to, and press Q twice  
Note: Each recording is short in length, so be prepared to speak  
once you have initiated the recording.  
4
When ready, hold the phone approximately 7” (178mm) from  
your mouth, press Q and speak clearly into the microphone  
to record the name of the selected Phonebook entry  
When the recording has stopped, you will be prompted to repeat the  
name.  
5
Press Q and repeat the name  
Once recording is complete for a second time, the display will  
indicate if the recording was successful or not. If unsuccessful,  
repeat from step 4.  
Recalling Voice Dial Entries  
From Idle mode move and hold the navigation key (g) in any  
one of the four directions a, b, c or d. Speak clearly the  
name you wish to recall (exactly as recorded) and wait  
The above procedure will recall the phone number and the recorded  
Voice Dial entry is repeated; to initiate the call press D.  
Dialling Voice Dial Entries  
Using Permission  
From Idle mode press Q, select Personalise > Voice  
Command > Permission and press Q  
With this function enabled a recalled phone number is automatically  
dialled without further intervention.  
Repeat this process to disable the Permission function returning to  
Voice Dial recall only  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Personalising Your Phone  
Editing the Voice Dial Entries  
You can add to, play or delete any of the Voice Dial entries. With a  
Voice Dial entry displayed:  
Press Q and use e to select Add, Play or Delete and press  
Q to select the desired option  
Add  
To add a new Voice Dial entry  
Play  
To listen to the recording of a Voice Dial entry  
Delete  
To delete an entry  
Selecting Vibration Alert Type  
The vibration alert facility may be set to vibrate continuously or  
intermittently.  
1
From Idle mode press Q, select Personalise > Vibration  
Alert and press Q  
2
Use e to select the type of vibration desired and press Q  
Changing the Language  
It is possible to change the language that the phone uses for either  
the display messages and/or for text entry.  
1
2
3
From Idle mode press Q, select Personalise > Language  
and press Q  
Use e to select Display Language or Tegic Language (text  
entry) that you wish to change and press Q  
Use e to select the desired language and press Q  
Restoring the Default Phone Settings  
Any personal settings can be returned to their factory default, with  
the exceptions of the Phone Lock code and the Language.  
1
From Idle mode press Q, select Personalise > Defaults and  
press Q  
2
Press Q to restore the default settings  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Phone Security  
Phone Security  
The phone features a number of security functions that protect  
against unauthorized use, and enable you to restrict access to  
certain features - see “Using the PIN” page 11. It is recommended  
that you memorize your security codes. If you need to make a note of  
your security codes, never write them in a way that they can be  
recognized by another person. If you forget them contact your dealer  
for the Phone Lock Code or your Service Provider for PIN and PIN2.  
Using Key Guard  
The Key Guard function is used to prevent any keys  
from being accidentally pressed e.g. when the phone  
is being carried.  
From Idle mode press Q, select Key Guard  
and press Q twice to enable Key Guard  
When a call is received Key Guard will be disabled  
temporarily, allowing you to press any key to answer  
the call. Emergency calls can still be made - see “Emergency Calls”  
page 9.  
Note: When making emergency calls with the “Key Guard” enabled,  
there will be no audible or visual indication that the number is being  
dialled  
Disabling Key Guard  
When Free is displayed press Q twice  
Changing the Security Codes  
1
From Idle mode press Q, select Phone Menu > Security and  
press Q  
2
3
4
5
6
Use e to select Phone Lock, PIN or PIN2 and press Q  
Use e to select Change and press Q  
Enter the current code and press Q  
Enter the new code and press Q  
Verify the new code and press Q  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Phone Security  
Restricting Calls  
Call Barring  
The Call Bar function is used to restrict certain outgoing and/or  
incoming calls. Call Bar is controlled by a security password that is  
supplied by your Service Provider. When updating or checking the  
status of Call Bar the phone must be registered with a network.  
Different Call Bar restrictions can be used for voice, fax and data  
calls. Any combination of call restrictions can be set.  
1
2
3
4
From Idle mode press Q, select Phone Menu > Security >  
Call Bar and press Q  
Use e to select Bar Voice, Bar Fax or Bar Data and press Q  
twice  
Use e to the select level of call barring that you wish to apply  
and press Q  
Enter Call Bar password and press Q  
Barred Dialling  
The Barred Dial function enables you to bar all phone numbers  
pre-programmed in the SIM from being dialled on the phone. To use  
this function PIN2 is required.  
1
From Idle mode press Q, select Phone Menu > Security >  
Barred Dial and press Q  
2
Enter PIN2 and press Q  
Fixed Dial  
The Fixed Dial Store is part of Phonebook, but with additional  
security. When the security feature Fixed Dial is enabled it is only  
possible to make calls with phone numbers that are in the Fixed Dial  
Store.  
When Fixed Dial is enabled any manually dialled phone numbers  
must match a phone number in the Fixed Dial Store.  
To store, edit or delete a phone number in the Fixed Dial Store the  
Fixed Dial function must be enabled. With Fixed Dial enabled, all  
phone numbers can be added, edited or deleted as normal, but you  
will be prompted for PIN2.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Phone Security  
“Wild” Numbers  
Wild numbers are spaces that can be stored in a phone number. The  
“wild” numbers must be filled before the phone number is dialled.  
Used in conjunction with Fixed Dial calls can be restricted, for  
example, to a specific area by storing the area code of a phone and  
when recalled the remainder can be added. The “wild” numbers can  
be anywhere within a stored phone number.  
1
2
Press and hold 0 until _ is displayed to enter a wild number  
When the phone number is recalled pressing a numeric key  
will fill in a “wild” number.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Applications  
Applications  
Clock  
This phone incorporates a clock with date/time, an alarm and a  
power on/off feature.  
A second clock for dual time is also included - see “Second Clock”  
page 59.  
Initially Setting the Home Time  
1
From Idle mode press Q, select Applications  
> Clock Function > Clock Set > Home >  
Time Set and press Q  
2
3
4
Use e to select whether you require Summer  
Time setting on or off and press Q  
Enter the digits for the date in the format  
day/month/year and press Q  
Enter the digits for the time using 24 hour clock and press Q  
Setting the Clock Format  
1
From Idle mode press Q, select Applications > Clock  
Function > Clock Format > Display Format and press Q  
2
3
Use e to cycle through the different clock and/or date formats  
Press Q to select the desired clock display type  
Altering the Time/Date  
1
From Idle mode press Q, select Applications > Clock  
Function > Clock Set > Home > Time Set and press Q  
2
3
4
5
6
Press and hold B to remove the current date  
Enter the digits in the format day/month/year  
Press Q to accept the date  
Press and hold B to remove the current time  
Enter the digits using 24 hour clock and press Q  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Applications  
Setting the Clock for Summer Time  
1
From Idle mode press Q, select Applications > Clock  
Function > Clock Set > Home > Summer Time  
2
Press Q to set Summer Time On or Off  
Setting the Alarm  
If you have not already set the clock, you will be prompted to do so  
prior to setting the alarm.  
There are four separate alarms, each of which may be set  
independently.  
1
From Idle mode press Q, select Applications > Clock  
Function > Alarm Set and press Q  
2
3
4
5
Use e to select the alarm to be set and press Q  
Enter the digits for the time and press Q  
Use e to select the frequency of the alarm and press Q  
Use e to select the ring type and press Q  
Once the alarm has been set, ? will be displayed when the phone is  
in Idle mode.  
The alarm is activated in accordance with the current clock (Home or  
Second)  
Muting the Alarm  
When the set time is reached the alarm will sound and the display  
will flash with an alarm message. The alarm will sound for 30  
seconds. If the alarm is due during a call, it will activate vibration  
alert.  
To end the alarm:  
Press any key  
Disabling the Alarm  
1
From Idle mode press Q, select Applications > Clock  
Function > Alarm Set and press Q  
2
3
Use e to select the alarm to be disabled and press Q twice  
Use e to select Disabled and press Q  
Once disabled, following the same procedure will re-enable the  
alarm.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Applications  
Adjusting the Alarm Time  
1
From Idle mode press Q, select Applications > Clock  
Function > Alarm Set and press Q  
2
3
4
5
6
Use e to select the alarm to be adjusted and press Q  
Press and hold B to remove the current alarm time  
Enter the digits for the time and press Q  
Use e to select the frequency of the alarm and press Q  
Use e to select the ring type and press Q  
Setting a Power On/Off Time  
You can set your phone to turn itself on or off automatically at a  
specified time using the Power On/Off feature. The procedure for  
setting/adjusting the Power On/Off automatically is similar to that for  
setting the time on the clock. For either setting or adjusting the time  
you need to select Power On Time or Power Off Time in the Clock  
Function menu.  
Caution: Ensure that the setting of the Alarm or Power On function  
will not contravene any regulations whereby it may automatically  
power on when in an aircraft or medical facility etc. - see “Important  
Information” page 67.  
Calculator  
The four function calculator will enable you to perform simple  
arithmetic calculations (addition/subtraction/multiplication and  
division).  
1
2
3
4
From Idle mode press Q, select Applications > Calculator  
and press Q  
Enter a number (maximum 10 digits) and it will be displayed on  
the lower line  
Use g to select the arithmetic operation you wish to perform  
(b to multiply, c to add, a to divide, d to subtract)  
Enter a number (maximum 10 digits) and it will be displayed  
next to the operation symbol  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Applications  
5
6
If you use g to select another arithmetic operation to perform,  
an intermediate calculation will be performed and the result  
displayed on the upper line  
Press Q to complete the calculation when = is displayed in the  
main option area  
Note: Press and hold 1 to add a decimal point.  
Currency Convertor  
The currency convertor enables you to convert from/to a home  
currency using a conversion rate that you enter.  
From Idle mode press Q, select Applications > Currency  
and press Q  
Entering an Initial Conversion Rate  
1
Press Q  
2
Enter an abbreviation for the home currency (up to 3  
characters) and press Q twice  
3
4
Enter an abbreviation for the foreign currency (up to 3  
characters) and press Q twice  
Enter the currency conversion rate and press Q twice  
Note: Press and hold 1 to add a decimal point.  
Converting a Value  
1
Check the conversion rate is the one you require and press Q  
twice  
2
Enter the value to be converted and press Q twice  
The conversion rate will be retained in the phone once entered. The  
next time you use the convertor you can edit the conversion rate /  
currency abbreviation while in the Currency /rate display. Press Q,  
then use e to select Edit and press Q.  
Swapping the Currency Conversion  
When you have accepted the conversion rate and are ready to enter  
the value to be converted, you can swap the currencies to convert  
from the foreign currency into the home currency.  
1
2
Use e to select Swap and press Q  
Enter the value for conversion and press Q twice  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Short Text Messages  
Short Text Messages  
You can receive, display, edit and/or send short text messages, of up  
to 160 characters to mobile phones on the same network or any  
network that has a roaming agreement.  
Setting the Phone for Text Messages  
Before you can send a message you must enter the Message Centre  
number into Parameters (your Service Provider will supply the  
Message Centre number).  
The Message Centre number may have been preprogrammed, on  
your SIM card.  
Setting the Message Centre Number  
1
From Idle mode press Q, select Messages > Short Message  
> Parameters > Message Centre and press Q  
2
Enter message centre number in international dial format – see  
“International Dialling” page 8  
Sending a Text Message  
1
2
3
4
From Idle mode press Q, select Messages > Short Message  
> Create and press Q  
Use e to select one of the pre-defined messages to be used as  
a basis and press Q twice, or select <Create> and press Q  
Use g to navigate through the message and add any extra  
text (up to a total of 160 characters) – see “Text Entry” page 61  
Press Q twice  
You will be prompted if you wish to send the message, if you do not  
wish to send the message press B, the message will be stored.  
5
Press Q and enter the destination phone number (or recall a  
number from the Phonebook) - see “Retrieve a Number” page  
13 and press Q  
6
7
Press Q twice  
You may be asked if you wish to have delivery confirmation. If  
you do not want confirmation use e to select NO then press  
Q. If you do, use e to select Yes then press Q  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Short Text Messages  
The default setting for delivery confirmation can be enabled/disabled  
using the Report parameter in the Short Message > Parameters  
menu.  
Receiving Text Messages  
When a Short Text Message is sent to your phone the message  
indicator (N) will flash in the display, with an audible tone or  
vibration. This indicates that a new message has been received.  
When Read is displayed press Q to read the message. Use g to  
navigate through the message and to identify the sender of the  
message.  
Note: If the message indicator is displayed constantly (does not  
flash) this indicates that the message area is full and you will need  
to delete old messages in order to be able to receive new messages  
in the future.  
Message Options  
Reply to a Message  
When you have received and read a message you may wish to reply  
to the sender.  
Pressing Q twice will allow you to create a reply message  
Delete a Message  
Press Q  
1
2
Use e to select Delete and press Q to delete the message  
To enable the auto-deletion of messages - see “Message  
Parameters” page 33.  
Edit a Message  
1
Press Q  
2
Use e to select Edit and press Q to edit the message  
Pressing Q twice will give you the option to send the edited  
message - see “Sending a Short Text Message” page 31. Press B  
if you do not wish to send the message and it will be stored in the  
Send List.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Short Text Messages  
Creating a User Defined Message  
It is possible to create a user defined message which, once  
generated, can be used as any other pre-defined message.  
1
From Idle mode press Q, select Messages > Short Message  
> User Defined Msg and press Q  
2
Edit the message as required and press Q twice  
The user defined message is displayed at the top of the list of  
pre-defined messages for selection.  
Manage Messages Lists  
All messages, whether sent or received, will be stored on the SIM  
until they are deleted. Selecting a stored message allows it to be  
replied to, edited or deleted.  
Receive List  
Messages received will be stored in the Receive List. A flashing “w”  
indicates an unread message.  
When reading a message the sender’s information is displayed  
below the text. Press e to show the senders ID (if available), the time  
the message was sent and the message centre number. Pressing Q  
twice allows you to reply to the message.  
Send List  
When a message has been sent or edited it will be stored in the  
Send List.  
Review  
Review allows you to check usage of the message area.  
Message Parameters  
From Idle mode press Q, select Messages > Short Message  
> Parameters and press Q  
The following parameters can be set:  
Auto Delete  
When set will erase messages automatically:  
Received Read - will overwrite the oldest read message  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Short Text Messages  
Received Any - will overwrite the oldest message even though it  
may not have been read.  
Lifetime  
This is the duration that your message is stored at the Message  
Centre. Delivery attempts will be repeated until the message has  
been delivered or the Lifetime expires.  
Message Centre  
Allows the Message Centre phone number to be edited - see “Setting  
the Phone for Text Messages” page 31.  
Report  
When your message has been delivered a confirmation will be  
received if Report is set to Yes.  
Protocol  
The Message Centre may be able to convert the message to the  
format specified by the selected protocol.  
Cell Broadcasts  
Cell broadcasts are general information that is sent to your phone by  
a network operator. The information can include topics like local  
traffic reports, weather etc.  
Setting Broadcast Topics  
You need to specify the topic(s) of information that you wish to  
receive as broadcasts before you can receive them.  
1
From Idle mode press Q, select Messages > Short Message  
> Broadcasts > Topics and press Q  
2
3
Press Q twice to insert a new topic  
Use e to cycle through the available topics and press Q to  
insert the currently displayed topic into your broadcast list  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Short Text Messages  
Enabling/Disabling Broadcasts  
1
From Idle mode press Q, select Messages > Short Message  
> Broadcasts and press Q  
2
Select Receive and press Q  
Once enabled, following the same procedure will disable broadcasts.  
Message List  
This is a store for the last received broadcast messages. Messages  
can be deleted from here.  
Language  
The Language in which broadcast messages are displayed can be  
changed (network dependent).  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Call Information  
Call Information  
Recent Numbers  
Recently dialled phone numbers will be stored in Last Dialled.  
If Caller Identification is available the caller’s phone number for an  
answered call will be stored in Answered and an unanswered call  
will be stored in Unanswered.  
If Caller Identification is not available then calls will still be stored but  
will have the date and time attributed to them.  
When the store is full the next phone number will overwrite the  
oldest.  
1
2
From Idle mode, press D  
Use e to select Last Dialled, Answered or Unanswered and  
press Q  
3
Use e to select the phone number (or name) you wish to redial  
and press D  
You can edit or delete the phone number before dialling – see  
“Editing Phonebook Entries” page 14.  
If you wish to store the selected number in Phonebook, press A  
while the number is displayed – see “Store a Number” page 12.  
Calling the Last Dialled Number  
To redial your last called phone number press D D  
Returning an Unanswered Call  
When the display shows that you have received calls but not  
answered them.  
1
2
Press Q  
The last caller’s phone number will be displayed if it is  
available  
3
4
Use e to select the phone number you wish to dial  
Press D  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Call Information  
Call Duration  
1
From Idle mode press Q, select Phone Menu > Call Service  
> Calls and press Q  
Note: The Calls function is SIM dependent. If the SIM does not  
support this function then items under Calls menu will be found  
directly under Call Service menu.  
2
Use e to select one of the functions described below, and  
press Q  
.The Last Call function will display the duration and call charge, if  
available, of the last call during Idle mode or the current call during a  
call. Times are indicated as: hours (0-99), minutes (0-59), seconds  
(0-59) - HH:MM:SS.  
The All Calls function displays the accumulated duration and call  
charge, if available, of Incoming and Outgoing calls. The lock code  
or PIN2 is required to reset the timer and call charge.  
Call Charges  
To maintain control over the cost of calls that are made, the phone  
can be set to restrict use to a finite number of units overall. This  
function is SIM dependent.  
Setting the Unit Price  
Firstly, a price per unit must be entered. This is the cost that the  
Service Provider charges for one unit of call time.  
1
From Idle mode press Q, select Phone Menu > Call Service  
> Service Charges > Price/Unit and press Q  
2
Press Q to edit the values  
At this point you will be asked to enter your PIN2 or Lock code then  
press Q.  
3
Enter a currency unit (up to three characters) and press Q  
twice  
4
Enter a price and press Q twice  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Call Information  
Setting the Maximum Unit Level  
This function is SIM dependent  
1
From Idle mode press Q, select Phone Menu > Call Service  
> Service Charges > Max Cost and press Q  
2
Press Q twice to edit the values  
At this point you will be asked to enter your PIN2 or lock code then  
press Q.  
3
Enter a value (number of units) which is to be the maximum  
permitted, and the corresponding cost will be displayed  
4
Press Q twice to accept  
Note: The duration of one unit may vary during the day, peak and  
off-peak times. Therefore, the call charge can be calculated  
accordingly. However, call charge information may not give an  
accurate reflection of the tariffs charged by your Service Provider.  
Setting a Warning Level  
A warning can be set as an indication that the maximum cost is  
about to be reached. This function is SIM dependent.  
1
From Idle mode press Q, select Phone Menu > Call Service  
> Service Charges > Warning at and press Q  
2
3
Press Q twice to edit the value  
Enter a value (in units) at which time you would like the  
warning to sound and press Q twice  
Call Identification  
In the Call Service menu, the Caller’s ID and Withhold ID functions  
allow you to check the status of whether a Caller’s Identification is  
sent or can be received. (Withhold ID is Network Dependent)  
Note: When checking the status the phone must be registered with  
a network.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Advanced Operation  
Advanced Operation  
Diverting Calls  
Voice, fax and data calls can be diverted using different  
circumstances and to different numbers. For example you may wish  
voice calls to be diverted to Voicemail in the event that the phone is  
switched off.  
1
From Idle mode press Q, select Phone Menu > Call Divert  
and press Q  
2
3
Use e to select the type of calls to divert and press Q twice  
Use e to select the circumstances to initiate the divert and  
press Q  
4
Enter phone number to divert to and press Q twice  
When a divert situation is enabled the divert icon (t) is displayed.  
When updating or checking the status of Call Divert the phone must  
be registered with a network.  
Holding Calls and Call Waiting  
Holding a Call  
During a call:  
1
2
Press Q  
Use e to select Hold then press Q  
Resuming a Call  
1
Press Q  
2
Use e to select Resume then press Q  
Making a Second Call  
1
Enter phone number (or recall from Phonebook – see “Retrieve  
a Number” page 13)  
2
Press D  
The first call will be placed on hold.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Advanced Operation  
Receiving a Second Call  
A second call can be received, if Call Waiting is switched on. This is  
enabled from the Phone Menu > Call Service menu. It is not  
possible to have more than one fax or data call. All voice calls must  
be ended before you can make or receive a fax or data call.  
Accept a Second Call  
1
Press Q  
2
Use e to select Accept and press Q  
The current call will be placed on hold.  
Reject a Second Call  
1
Press Q  
2
Use e to select Reject and press Q  
End Current Call and Receive Second Call  
Press E with a waiting call  
1
2
Press any key except E or g  
Operation During Two Calls  
Swapping Between Calls  
The ! prompt indicates the current call  
1
Press Q  
2
Use e select Swap and press Q  
End Current Call  
1
2
Press Q  
Use e to select End and press Q  
The held call will remain held.  
End Both Calls  
Press E  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Operation  
Call Transfer  
With two calls connected, Call Transfer enables you to connect them  
together ending your connection, leaving the other parties to talk  
together without you.  
When you have two calls:  
1
2
Press Q  
Use e to select Trans. and press Q  
The two calls will be connected to each other and your call will be  
ended.  
Note: Two call transfer cannot be utilized while in Multi-party mode.  
Multi-party Calls  
A Multi-party call enables three to five people to be in conversation at  
the same time. It is possible to swap between a Multi-party call and  
another call in the same way as with two separate calls.  
Enabling Multi-party  
With two calls connected (one active, one on hold):  
1
2
Press Q  
Use e to select Merge and press Q  
A Multi-party call has been enabled, all three people will be able to  
talk to each other.  
Adding to Multi-party  
You can add to the Multi-party call (up to a maximum of five). Either  
by making a call or accepting an incoming call. The call can then be  
merged into the Multi-party.  
Note: When making a call or accepting an incoming call the  
Multi-party call will be placed on hold. The callers in the Multi-party  
call can continue to communicate with each other while on hold.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Advanced Operation  
Splitting a Multi-party  
You can select an individual from the Multi-party and remove their  
connection. This enables you to talk privately without the  
participation of the rest of the Multi-party.  
During a Multi-party call:  
1
2
3
4
5
Press Q  
Use e to select Option and press Q  
Use e to select a caller in the Multi-party  
Press Q  
Use e to select Split and press Q  
The selected caller will be split from the Multi-party call and the  
Multi-party call will be placed on hold (the remaining Multi-party call  
callers can still communicate).  
Ending Multi-party Calls  
You can either select an individual in the Multi-party and end the call  
or end the entire Multi-party call. If a call is held, or an other call is  
incoming then an individual call cannot be ended.  
Ending a Single Connection  
During a Multi-party call  
1
2
3
4
5
Press Q  
Use e to select Option and press Q  
Use e to select a caller in the Multi-party  
Press Q  
Use e to select End and press Q  
Ending a Multi-party Call  
During a Multi-party call:  
Press E to end all the calls at once  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Operation  
Changing to a New Network  
When not in your home Country / Region, you may use a network  
that you do not directly subscribe to, this is called ROAMING.  
National Law may not permit roaming in your home region.  
The New Network function is used to manually select a network that  
is available in your current location.  
1
2
From Idle mode press Q, select Phone Menu > Network >  
New Network and press Q  
Use e to select one from the list of available networks and  
press Q  
An X will be displayed in the information area if you cannot register  
with the selected network.  
When the Search Mode is set to Automatic the phone will  
automatically reselect a new network in order to maintain optimum  
network availability. With the Search Mode set to Manual the phone  
will only use a selected network. If coverage is lost another network  
should be selected.  
The Network List is used when the Search Mode has been set to  
Automatic. The location numbers in the Preferred Network List show  
the search priority.  
Selecting Insert stores a new network in the currently displayed  
location and then moves other networks down, Edit overwrites the  
old network with a new one, and Add stores a new network at the  
end of the list.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Schedule  
Schedule  
The Scheduler can be used to register reminders for personal events  
as well as planning holiday periods. A maximum of 100 reminders  
can be set, each of up to 96 characters long.  
Caution: Ensure that any settings made in the Scheduler will not  
contravene any regulations whereby the phone may automatically  
power on when in an aircraft or medical facility etc. - see “Important  
Information” page 67  
Creating a Reminder  
1
2
From Idle mode press Q, select Schedule and press Q  
Use the Navigation key (g) to select the date for your  
reminder and press Q twice to create a new entry  
3
4
Enter the digits for the time using 24 hour clock and press Q  
twice  
Use e to select the frequency of the reminder and press Q  
When selecting Daily, Weekly or Yearly you will be given the option  
of using the “Repeat Count”, which allows you to set the frequency  
of the alarm.  
5
Enter the memo for the reminder – see “Text Entry” page 61,  
and press Q twice  
6
Use e to select a ring type for the reminder and press Q  
Note: To indicate that a reminder has been set, the date will appear  
as white numbers on a black or dark background.  
Viewing Reminders  
When in the Schedule menu, select the required date using  
the Navigation key (g) and press A to view reminders for  
that date  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Schedule  
Deleting Reminders  
1
2
From Idle mode press Q, select Schedule and press Q  
Use g to select the required date of the reminder and press  
A
3
4
Use e to select the reminder to be deleted and press Q  
Use e to select Delete press Q twice  
Setting a Holiday Reminder  
1
2
From Idle mode press Q, select Schedule and press Q  
Use the Navigation key (g) to select the day of your holiday  
and press Q  
3
4
5
Use e to select Function and press Q  
Use e to select Holiday Set and press Q  
Use e to select Day, Day of the Week and press Q three  
times to update the Holiday List  
Repeat process for each day of holiday as required  
Deleting Holiday Reminders.  
To delete holiday reminders:  
1
2
From Idle mode press Q, select Schedule and press Q  
Use the Navigation key (g) to select the day of your holiday  
to be deleted and press Q  
3
4
5
Use e to select Function and press Q  
Use e to select Holiday Set and press Q  
Use e to select Holiday List, select date for deletion press Q  
twice  
To delete ALL Holiday Reminders select All Clear and press  
Q twice  
Note: To indicate that a holiday reminder has been set, the date/s  
will be encapsulated in a clear box.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Schedule  
Jump to Future Date  
1
2
3
4
5
From Idle mode press Q, select Schedule and press Q  
Press Q  
Use e to select Jump press Q  
Press and hold B to remove the current date  
Using 0 - 9 enter the date (using chosen date format) to which  
you want to ‘jump’ to and press Q twice  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Games  
Games  
Mogular  
The object of the game is to hit a character as it appears from a hole,  
scoring points for each hit. The holes relate directly to the layout of  
the keypad (0 9, * and #). By pressing the appropriate  
key the character will be hit. A life is lost for each miss.  
Play the Game  
1
From Idle mode press Q, select Games > Mogular and press  
Q
2
3
Use e to select a skill level and press Q to start the game  
The game finishes when all lives are lost  
Pause the Game  
Press A  
The score table is displayed  
Press B to resume the game  
Quit the Game  
Press B or E during the game  
Clear Best Score  
From the skill level display:  
Press A a A  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Games  
15 Puzzle  
A puzzle containing numbered blocks (1 – 15) that, when scrambled,  
have to be rearranged into numeric order. There is no time limit, but  
the target is get the LOWEST score possible.  
Play the Game  
1
From Idle mode press Q, select Games > 15 Puzzle and  
press Q  
2
3
Press 0 to scramble the numbers in the grid  
Use g to move the numbered blocks around the grid  
arranging them in numerical order  
Pause the Game  
Press A  
An instruction table is displayed  
Press B to resume the game  
Quit the Game  
Press B or E during the game  
Clear Best Score  
From the initial display (before scrambling the blocks):  
Press A a A  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
WAP Browser  
WAP Browser  
The phone’s WAP (Wireless Application Protocol) Browser enables  
you to access Internet services supported by the network, such as  
news, weather reports, sport etc.  
Server Settings  
Before you can access Internet services, your SIM must be data  
enabled and the relevant configuration information, entered into the  
phone.  
These settings may have been pre-programmed for you by the  
network operator.  
Note: Modifying previously entered settings can cause failure of the  
Browser.  
1
2
3
From Idle mode press Q, select Browser > Browser Setting  
> Server Setting and press Q  
Two servers may be setup on the phone. Use e to select one  
or other of the server settings and press Q  
Use e to select Edit and press Q  
A list of configuration parameters will be displayed. The parameter  
Name will be highlighted and Edit will be displayed.  
4
5
6
Press Q  
Enter the name of the WAP server and press Q twice  
Use e to select each of the other parameters in turn, edit the  
information and press Q twice  
7
8
After all parameters have been entered, press B to return to  
the previous menu level  
Select the server setting that you have just edited and press  
Q. Use e to select Set and press Q  
Record your WAP settings in the table at the rear of this booklet  
for easy reference.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
WAP Browser  
Activating the Browser  
To activate the Browser:  
From Idle mode press Q, select Browser > Start Browser  
and press Q  
The first time that the browser is activated there will be no content  
stored so the Home URL content will be displayed (as defined by the  
network operator). From the second time onwards, the last displayed  
page will be recalled from cache (Cache is the phone’s memory that  
stores content downloaded in the past). When recalling content from  
cache the phone remains off-line (not connected to a WAP server).  
Navigating Content  
Use the Navigation key (g) to scroll through the content on the  
screen as follows:  
Use e to scroll up/down on the current page  
Use d to return to the previous page  
Use c to return to the next page (only applicable if returned to  
previous page)  
When linked text (underlined text) is highlighted press Q to load the  
page represented by the link.  
(
indicates a table - with View displayed press Q to view  
contents of table  
)
~
Indicates an image which cannot be displayed  
Indicates on-line browsing  
The Browser Menu  
The Browser also contains its own menu which is applicable when  
content is currently being displayed (either on-line or off-line).  
The Browser menu is accessed by pressing A when Menu is  
displayed at the bottom left of the display.  
This menu is used as follows:  
Home Deck Displays the Home URL content as defined by the  
network operator  
Bookmark  
Enter URL  
Reload  
Use, add, delete and rename bookmarks  
Type in a URL directly to go to a known site  
Will reload and update the current page  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
WAP Browser  
Reset  
Exit  
Deletes the content in cache and displays the Home  
URL content  
Deactivates the Browser  
Using Bookmarks  
Frequently accessed pages may be bookmarked to save time. This  
prevents the need to re-enter the URL each time.  
Adding a Bookmark  
1
2
3
While viewing content press A  
Use e to select Bookmark  
Press Q twice to register the bookmark  
Recalling Pages Using Bookmarks  
1
2
3
With content displayed press A  
Use e to select Bookmark and press Q  
Use e to select the relevant bookmark from the list, and press  
Q
Renaming a Bookmark  
1
2
3
With content displayed press A  
Use e to select Bookmark and press Q  
Use e to select the relevant bookmark from the list, and press  
A
4
5
Press Q  
Press and hold B to remove the bookmark name, then  
re-type the name required and press Q twice  
Deleting Bookmarks  
1
2
3
With content displayed press A  
Use e to select Bookmark then press Q  
Use e to select the relevant bookmark from the list, and press  
A
4
Use e to select Delete and press Q twice  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
WAP Browser  
Deactivating the Browser  
The Browser can be deactivated as follows:  
When browsing on-line press E once to review cache off line  
When browsing off-line press E once to return to Idle mode  
Setting the Linger Time  
The phone will be automatically disconnected from the WAP server  
after a set period of non-interaction. This period is defined in seconds  
by the Linger Time setting.  
1
From Idle mode press Q, select Browser > Browser Setting  
> Linger Time and press Q  
2
Press and hold B to remove the current linger time, then  
re-enter the value required and press Q twice  
Last Error  
If an error should occur when using the Browser, use this function to  
inform the network operator of the last error which occurred with the  
phone to assist with a diagnosis of the problem.  
From Idle mode press Q, select Browser > Browser Setting  
> Last Error and press Q  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Internet E-mail  
Internet E-mail  
The E-mail function will send and receive Internet e-mail messages  
to the mail server of an Internet Service Provider that supports  
POP3/SMTP protocols.  
E-mail Setup  
Before you can send and receive e-mail messages, your SIM must  
be data enabled and a contract must be set up with an Internet  
Service Provider and the relevant configuration information, supplied  
by the provider, entered into the phone.  
1
From Idle mode press Q, select Messages > E-mail and  
press Q  
2
3
Use e to select Parameters and press Q  
Use e to select Server Settings and press Q  
Up to three Internet Service Providers may be setup  
Press Q  
4
A list of configuration parameters will be displayed. The parameter  
Profile Name will be highlighted and Edit will be displayed  
5
6
Press Q  
Enter the name of the Internet Service Provider and press Q  
twice  
7
8
9
Use e to select each of the other parameters in turn, edit the  
information and press Q twice  
After all parameters have been entered, press B to return to  
the previous menu level  
Select the server setting that you have just edited and press  
Q. Use e to select Set and press Q  
Record your e-mail settings in the table at the rear of this  
booklet for easy reference.  
For additional information about setting up the Internet E-mail  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Internet E-mail  
Create a New Message  
1
From Idle mode press Q, select Messages > E-mail and  
press Q  
2
3
Use e to select Create and press Q  
Enter the relevant details in the To, CC, Subject and Message  
fields, using g to navigate between them and press Q to  
select each in turn  
4
5
6
7
8
Press Q, use e to select Phonebook Entry press Q  
Use e to select required address and press Q twice  
After entering the necessary information press Q twice  
Press Q  
Use e to select Save and press Q  
Send/Receive Messages  
The Send/Receive function is used to both send messages created  
on the phone to the server of the Internet Service Provider, and to  
check your mailbox on the server for incoming messages and  
download them to the phone at the same time.  
1
From Idle mode press Q, select Messages > E-mail and  
press Q  
2
Use e to select Send/Receive and press Q  
If there are unsent messages in the Outbox you will be prompted to  
send them.  
3
Press Q to send any unsent messages.  
If there are new messages to download to the phone then you will be  
prompted to receive them.  
4
Press Q to receive new messages.  
If no action is taken the connection will time out after one minute and  
return to the E-mail menu.  
If any messages are downloaded then, when finished, the phone will  
display the new messages allowing them to be viewed, replied to etc.  
If no messages are downloaded the phone will display the Inbox  
menu, unless there are no messages in this list, then it will return to  
the E-mail menu.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Internet E-mail  
Read Messages  
From Idle mode press Q, select Messages > E-mail > Inbox  
and press Q  
The header fields of the most recent messages will be displayed.  
Use e to scroll through previous message headers and press Q.  
Use e to select View and press Q to read the current message,  
using e to scroll through the message.  
Message Status  
A message can be in one of four states. The current state of each  
message is indicated by an appropriate icon:  
^
$
%
&
Indicates a message which has been read or sent.  
Indicates an unread or unsent message  
Indicates that the message has been locked  
Indicates a broken message (either a message too long for  
the phone or a message which contains an attachment)  
While reading a message any of the following operations may be  
performed by pressing Q, using e until the relevant operation is  
displayed and pressing Q:  
Reply  
Compose a reply to the sender of the current message  
Forward  
Send the current message to a different person other than the  
sender  
Delete  
Remove the current message from the list  
Lock  
Apply a lock to the message so that it cannot be overwritten when  
receiving / creating further messages. A locked message can still be  
deleted manually  
Recall  
To select the mobile phone number of the e-mail sender, to enable  
you make a voice call or review the number.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Internet E-mail  
Store an Address  
An e-mail address can be stored in the Mobile Phonebook - see  
“Store a Number” page 12  
Add a Signature  
This Signature function enables a pre-defined signature to be added  
to your outgoing e-mails. Once the signature has been setup, each  
time a new e-mail is created it will have the signature automatically  
inserted.  
Setup Signature  
1
From Idle mode press Q, select Messages > E-mail >  
Parameters > Signature and press Q  
2
Enter the text for your required signature – see “Text Entry”  
page 61 and press Q twice  
Manage Message Stores  
Once the Inbox and/or Outbox store are full any new messages  
received or created will overwrite existing messages from the oldest  
first. To prevent messages being overwritten each list should be  
maintained deleting any messages which are no longer required.  
Important messages can have a lock applied to them so that they  
cannot be overwritten when the Send/Receive process is activated.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Additional Features  
Additional Features  
Desktop Handsfree  
Desktop Handsfree enables you to hold a conversation without  
having to hold the phone to your ear.  
Note: Do NOT hold the phone to your ear in Handsfree mode.  
Swapping Between Handsfree and Handheld Calls  
During a Handheld call:  
1
2
Press Q  
Use e to select H’free and press Q  
During a Handsfree call:  
Press Q twice to revert to Handheld operation  
Answering a Call Handsfree  
Pressing and holding D will allow the call to be answered  
Handsfree.  
Voice Memo  
You can record a two-way conversation for up to 18 seconds during  
a call. If a different SIM is installed any voice memos will be lost.  
Caution: Security of a recorded message is your responsibility. You  
MUST ask for the other party’s consent before recording.  
Record a Voice Memo  
Press Q  
Use e to select Memo and press Q  
A tone will sound when recording starts. When the recording stops a  
tone will sound to you.  
If you press Q while recording a voice memo, recording will stop but  
no tone will sound to either party.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Additional Features  
Play Back a Voice Memo  
From Idle mode press Q, select Applications > Voice Memo  
Play > Playback and press Q  
To stop playing, press Q twice  
The Note Pad function is available during playback - see “Note Pad”  
page 59.  
Volume Control During Playback  
While playing back:  
Use e to adjust the volume of the voice memo  
Delete Memo  
From Idle mode press Q, select Applications > Voice Memo  
Play > Delete and press Q twice  
DTMF Tones  
DTMF tones can be sent during conversation. These are often used  
to access voice mail, paging and computerized home banking. For  
example, you may need to input a number to remotely access voice  
mail messages. A phone number may be stored in the Phonebook  
with DTMF tones, allowing the number to be dialled upon recall and  
the DTMF number to be sent automatically.  
Send DTMF Tones During a Call  
+
@
)
Enter digits (0 to 9, and  
Pause Dial  
Using pauses allows you to send DTMF tones automatically.  
1
2
3
Enter phone number  
Press and hold 0 until a P is displayed  
Enter DTMF digits after the pause, e.g. enter the number to  
access voice mail messages.  
4
Press D  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Additional Features  
When the call is successful DTMF tones will be sent after 3 seconds  
or when D is pressed.  
If the DTMF tones are unsuccessful then the destination of your call  
may require that the length of the tones be increased.  
5
6
From Idle mode press Q, select Personalise > DTMF Length  
and press Q  
Use e to select Long and press Q  
Note Pad  
During a call you can enter numbers which you may wish to dial  
when the call has ended.  
During a call:  
1
2
Enter phone number  
When the call has ended press D to call that number  
To store in Phonebook, press A while the number is displayed –  
see “Store a Number” page 12.  
Second Clock  
The Second Clock can either be set to auto-adjusting, whereby the  
second time will be automatically set from the code of the current  
network, or a specified time difference can be set manually.  
Setting Clock Display  
1
From Idle mode press Q, select Applications > Clock  
Function > Clock Format > Display Pattern and press Q  
2
Use e to select either Second Time or Home Time and press  
Q
Setting Auto Adjustment  
If you travel to a country / region which has a roaming agreement  
with your home network, your Second Clock will be automatically  
adjusted. However, for countries / regions which have several time  
zones in the same area manual adjustment is required.  
1
From Idle mode press Q, select Applications > Clock  
Function > Clock Set > Second > Auto Adjustment >  
Home area and press Q  
2
Use e to select your home area and press Q  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Additional Features  
Enabling Auto Adjustment  
From Idle mode press Q, select Applications > Clock  
Function > Clock Set > Second > Auto Adjustment > Auto  
Adjustment and press Q  
Repeat to disable Auto Adjustment.  
Setting Manual Adjustment  
1
From Idle mode press Q, select Applications > Clock  
Function > Clock Set > Second > Time Difference and  
press Q  
2
Use e to select the time difference required and press Q to  
set the value  
Setting Summer Time  
From Idle mode press Q, select Applications > Clock  
Function > Clock Set > Second > Summer Time and press  
Q.  
Once enabled, following the same procedure will disable Summer  
Time.  
Accessory Related Features  
When Auto Answer is switched on, and Personal Handsfree is  
connected, a call will be answered without pressing any keys. Any  
call waiting should be answered in the normal way.  
This is also applicable to the Handsfree Car Kit accessory.  
See the documentation provided with the relevant Accessory  
for operational details.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Text Entry  
Text Entry  
The phone provides a means for entering alphanumeric characters to  
enter details into the Phonebook, to create text and e-mail messages  
etc. This section details the characters that can be entered and the  
relevant keys to press.  
Text Mode  
Normal  
(ABC)  
Greek  
Extended  
(AÄÅ)  
Numeric  
(0-9)  
T9®  
Key  
(ÁÂÃ)  
+ _  
+ _  
Alternatives  
+ _  
0+P_  
0
Punctuation .@/:;*#+-”,!¡?¿_()[]{}’&%\^~|<>=_£$¥¤§  
1
2
3
4
5
6
7
8
9
*
+
1
2
3
4
5
6
7
8
9
*
#
abc  
ABCabc  
DEFdef  
GHIghi  
JKLjkl  
MNOmno  
PQRSpqrs  
TUVtuv  
WXYZwxyz  
*
AÄÅÆBCÇaäåæàbc  
DEÉFdeéèf  
GHIghiì  
ÁÂÃ  
ÄÅÆ  
ÇÈÉ  
ÊËÌ  
ÍÎÏ  
ÐÑÓ  
ÔÕÖ  
×ØÙ  
*
def  
ghi  
jkl  
JKLjkl  
mno  
MNÑOÖØmnñoöøò  
PQRSpqrsß  
TUÜVtuüùv  
WXYZwxyz  
*
pqrs  
tuv  
wxyz  
Shift/Lock*  
Space  
+
+
+
* Press * once to enter a single capital letter (subsequent  
characters will be lower case). Pressing * twice acts as a  
keyboard CAPS LOCK function and subsequent characters will be  
uppercase, until * is pressed for a third time returning to  
lowercase character entry.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Text Entry  
T9®Text Input  
Using this mode of text entry dramatically reduces the number of key  
presses required:  
Press a key once for any letter you require on that key. The desired  
letter may not be displayed. Continue pressing other keys until the  
end of a word is reached; then check that the word has been typed  
correctly before continuing on to the next word.  
If the combination of letters typed has produced a word which is not  
the one you require, press 0 repeatedly until the correct word is  
displayed. Continue to the next word.  
If the word you require is not in the internal dictionary (i.e. It is a  
proper noun or a rarely used word) then it should be entered using  
the Normal (U) mode.  
Other Text Modes  
To access any of the other text entry modes use A to cycle through  
until the desired mode is displayed in the Information Area.  
When using Normal (U), Greek (V) or Extended (W) text entry  
modes, each time a key is pressed in quick succession it will display  
the next character available on that key (or if the key is pressed and  
held down it will cycle through the available characters). Releasing  
the key, or pressing another key will enter the currently displayed  
character and the cursor will move to the next position.  
Editing Text  
Pressing e will move you up or down one text line (or field in  
Phonebook). Pressing f will move you left or right one character (or  
to the first character of the previous or next word when using T9® text  
entry mode). When the cursor is moved over a character and another  
key pressed this will insert the new character immediately before the  
selected character. Pressing B will delete the character to the left of  
the cursor or delete the current line when pressed and held.  
T9® is a trademark of Tegic Communications Inc.  
T9® Text Input is licensed under one or more of the following: U.S. Pat. Nos.  
5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554; Canadian Pat.  
No. 1,331,057; United Kingdom Pat. No. 2238414B; Hong Kong Standard Pat.  
No.HK0940329; Republic of Singapore Pat. No. 51383; Euro.Pat. No. 0 842  
463 (96927260.8) DE/DK, FI, FR, IT, NL, PT.ES, SE, GB; and additional  
patents are pending worldwide.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Structure  
Menu Structure  
From Idle mode pressing Q will display a menu of phone features.  
To select a feature press g so that icon of the feature that you  
require is highlighted then press Q.  
To exit the current menu and return to the previous level press B.  
To exit completely out of the menu structure, press and hold B, or  
E (except during a call).  
During a call a restricted menu will be available.  
1 Personalise  
Language  
Tones  
My Numbers2  
Hot Key Dial  
Service Charges2  
Cost Left  
Price/unit  
Max Cost  
Warning at  
Call Meter  
Call Divert  
Security  
4 Key Guard  
5 Browser  
Start Browser  
Browser Setting  
Linger Time  
All Tones  
Ring Volume  
Ring Type  
Melody Composer  
Voice Ringer  
Key Volume  
Key Tone Type  
Warning Tone  
Voice Command  
Voice Dial  
Phone Lock  
Last Error  
Server Setting  
Call Bar1  
PIN2  
6 Messages  
PIN22  
Fixed Dial2  
Barred Dial2  
Network  
Short Message  
Receive List  
Send List  
Create  
User Defined Msg  
Review  
Permission  
Display Setting  
Idle Screen  
8 Applications  
Games  
Greeting  
Backlight Colour  
Animation  
Voice Memo Play  
Download Melody1  
Clock Function  
Clock Set  
Clock Format  
Alarm Set  
Parameters  
Broadcasts2  
E-mail  
Contrast  
Backlight Time  
Vibration Alert  
Auto Answer  
DTMF Length  
Defaults  
Inbox  
Outbox  
Create  
Power On Time  
Power Off Time  
Calculator  
Send/Receive  
Review  
2 Games  
Mogular  
15 Puzzle  
Parameters  
Currency  
7 Phone Menu  
Call Service  
9 Schedule  
Calls2  
3 Phonebook  
Browse  
Create  
Alert Profile  
Group Setting  
Review  
*Last Call  
*All calls  
*Call Waiting1  
*Caller’s ID  
*Withhold ID  
1 Function is Network Dependent  
2 Function is SIM Dependent  
* Will move up a level if the SIM does not support Calls function  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Trouble Shooting  
Trouble Shooting  
Should any problem persist contact your dealer.  
Problem  
Cause  
Remedy  
Check that the battery is fully  
charged and correctly  
connected to the phone  
Phone will not  
switch on  
The network you  
Extremely short are using and the  
battery life for a condition of the  
new battery  
battery can affect  
battery life  
Short battery  
life for an old  
battery  
The battery has  
worn out  
Replace with a new one  
When the battery  
has been deeply  
discharged the  
phone will take a  
short time until  
the indicator  
The charging  
indicator does  
not light and the  
phone cannot  
be switched on  
when charging  
Leave the phone charging the  
battery for a few minutes  
before the indicator is lit and  
attempting to switch it on  
lights  
The phone is  
locked  
Unlock the phone  
Outgoing calls  
are barred  
Disable the outgoing call  
barring, or barred dial  
Calls cannot be  
made  
The phone is not Move to a coverage area and  
registered to a  
network  
operate your phone after it  
has registered with a network.  
Check your SIM supports  
Fixed Dial  
Check if the Fixed Dial is  
switched on  
Check the phone number is  
stored in the Fixed Dial  
Calls cannot be  
made from  
Fixed Dial Store  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Trouble Shooting  
The phone is not  
switched on  
Switch the phone on  
Incoming calls  
are barred  
Disable the incoming call  
barring  
Calls cannot be  
received  
The phone is not Move to a coverage area and  
registered to a  
network  
operate your phone after it  
has registered with a network.  
Check that the antenna  
Emergency  
calls cannot be GSM coverage  
You are not in a  
symbol S is displayed - move  
to a coverage area and  
made  
area  
operate your phone when the  
antenna symbol is displayed  
The phone is  
locked  
Unlock the phone  
Phone numbers  
cannot be  
recalled from  
Phonebook  
Phone number  
has been  
restricted  
Switch off restriction  
Important Error Messages  
These are some of the most important error messages which may be  
displayed:  
Area Not  
Roaming in the selected area is not allowed  
Allowed  
Network Not  
Roaming with the selected network is not allowed  
Allowed  
The network has detected an authentication  
Security Failure failure because your SIM is not registered with  
that network - contact your Service Provider  
The SIM is blocked because one of the PIN/PIN2  
unblocking keys (PUK/PUK2) has been entered  
SIM Blocked /  
Contact Service  
incorrectly ten times - contact your Service  
provider  
Provider  
The phone has detected a problem with the SIM -  
switch the phone off and then back on; if the  
message is still displayed contact your Service  
SIM Error  
Provider  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Trouble Shooting  
The SIM has failed one or more of the SIM  
personalisation checks - contact your Service  
Provider  
SIM Invalid  
The selected feature is either not supported by  
the SIM or is not available with the current  
subscription - contact your Service Provider  
Function  
Unavailable  
The PIN2 is blocked permanently because the  
wrong PUK2 has been entered ten times,  
services controlled by PIN2 cannot be used -  
contact your Service Provider  
PIN2  
Invalidated  
A message has been received but the message  
store is full - to receive messages, delete some  
of the currently stored messages or set  
messages to Auto Delete  
Message  
Rejected Store  
Full  
Number Too  
Long (Max:20)  
The edited or newly created Phonebook number  
is too long for the SIM  
The message area is full. Your messages cannot  
be stored until some of the currently stored  
messages are deleted  
Warning Store  
Full Continue?  
On changing the phone lock code, verification of  
the new code is incorrect - retry changing the  
lock code with correct verification  
Verification  
Failure  
Disabling or enabling the lock code has failed  
due to incorrect entry of the lock code - re-enter  
lock code  
Incorrect Lock  
Code  
Incorrect PIN /  
PIN2 / PUK /  
PUK2  
The entered code is incorrect - re-enter code  
correctly  
Auto Redial List Redial list of unsuccessfully dialled numbers is  
Full full - switch the phone off and then on again  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Information  
Important Information  
We, Matsushita Communication Industrial UK Ltd., declare, that the  
EB-GD95 conforms with the essential and other relevant  
requirements of the directive 1999/5/EC. A declaration of conformity  
Safety Considerations  
The following information should be read and understood as it  
provides details which will enable you to operate your phone in a  
manner which is both safe to you and your environment, and  
conforms to any legal requirements regarding the use of cellular  
phones.  
This equipment should only be charged with approved  
charging equipment. Other usage will invalidate any  
approval given to this apparatus and may be dangerous.  
The use of approved charging equipment is recommended  
to ensure optimum performance and avoid damage to  
your phone. Ensure the voltage rating of the Travel  
Charger is compatible with the area of use when traveling  
abroad.  
A Travel Charger (EB-CAD92xx* or EB-CAD95xx*) is  
supplied with the Main Kit. Other recommended  
equipment for charging - Car Charger (EB-CDD95),  
Handsfree Car Kit (EB-HFD95Z).  
* Where xx identifies the specific AC Adaptor region, e.g. CN, EU, HK, TW, UK.  
Switch off your cellular phone when in an aircraft. The use  
of cellular phones in an aircraft may be dangerous to the  
operation of the aircraft, disrupt the cellular network and  
may be illegal. Failure to observe this instruction may lead  
to the suspension or denial of cellular phone services to  
the offender, or legal action or both.  
You are advised not to use the equipment at a refueling  
point. You are reminded to observe restrictions on the use  
of radio equipment in fuel depots, chemical plants or  
where blasting operations are in progress. Never expose  
the battery to extreme temperatures (in excess of 60°C) or  
charge the battery for much longer than recommended.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Important Information  
You MUST exercise proper control of your vehicle at all  
times. Do not hold a phone while you are driving; find a  
safe place to stop first. Do not speak into a handsfree  
microphone if it will take your mind off the road. Always  
acquaint yourself thoroughly with restrictions concerning  
the use of cellular phones within the area you are driving  
and observe them at all times.  
Care must be taken when using the phone in close  
proximity to personal medical devices, such as  
pacemakers and hearing aids.  
For most efficient use hold the phone as you would any  
normal phone. Keep the antenna pointed over your  
shoulder while in use. Use only the supplied or approved  
replacement antenna. Unauthorized antennas,  
modifications or attachments may damage the phone and  
violate applicable regulations. The use of an unapproved  
antenna, modification or attachment may result in the  
invalidation of your guarantee – this does not affect your  
statutory rights.  
This Panasonic mobile phone is designed, manufactured  
and tested to ensure that it complies with the following  
specifications covering RF exposure guidelines;  
1999/519 EC, ICNIRP 1998, in accordance with ES59005  
1998  
ANSI C95.1-1992 (USA, Asia-Pacific), in accordance with  
FCC Guidelines (FCC 1997)  
AS/NZS 2772.1 (Int)-1998 (Australia), in accordance with  
ACA RS1999  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Maintenance  
Care and Maintenance  
Pressing any of the keys may produce a loud tone. Avoid  
holding the phone close to the ear while pressing the keys.  
Extreme temperatures may have a temporary effect on the  
operation of your phone. This is normal and does not  
indicate a fault.  
Do not modify or disassemble the equipment. There are no  
user serviceable parts.  
Do not subject the equipment to excessive vibration or  
shock.  
Avoid contact with liquids. If the equipment becomes wet  
immediately remove the power and contact your dealer.  
Do not leave the equipment in direct sunlight or a humid,  
dusty or hot area.  
Keep metallic items that may accidentally touch the  
terminals away from the equipment.  
Always charge the battery in a well ventilated area, not in  
direct sunlight, between +5°C and +35°C. It is not possible  
to recharge the battery if it is outside this temperature  
range.  
Do not incinerate or dispose of the battery as ordinary  
rubbish. The battery must be disposed of in accordance  
with local legislation and may be recycled.  
When disposing of any packing materials or old equipment  
check with your local authorities for information on  
recycling.  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Glossary of Terms  
Glossary of Terms  
Dual Tone Multi-Frequency tones allow you to  
DTMF Tones communicate with computerized phone systems,  
voice mailboxes etc.  
Global System for Mobile Communications. The  
name given to the advanced digital technology that  
your phone uses.  
GSM  
Network  
Operator  
The organization responsible for operating a  
GSM network.  
Used for the control of the Call Bar. Supplied by  
your Service Provider.  
Password  
Personal Identification Number used for SIM  
security. Supplied by your Service Provider. If the  
PIN is entered incorrectly 3 times, the PIN will be  
blocked.  
PIN  
Personal Identification Number used for the  
control of Fixed Dial Store and Call Charge  
metering. Supplied by your Service Provider. If  
the PIN2 is entered incorrectly 3 times, the PIN2  
will be blocked.  
PIN2  
PIN/PIN2 Unblocking Key. Used to unblock the  
PIN/PIN2. Supplied by your Service Provider. If  
the PUK/PUK2 is entered incorrectly 10 times,  
the PUK/PUK2 will be blocked.  
PUK/PUK2  
The act of locking on to a GSM network. This is  
usually performed automatically by your phone.  
Registration  
Roaming  
The ability to use your phone on networks other  
than your Home network.  
Service  
Provider  
The organization responsible for providing access  
to the GSM network.  
Subscriber Identity Module. A small smart-card  
which stores unique subscriber and user-entered  
information such as Phonebook and Short  
Messages. Supplied by your Service Provider.  
SIM  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Glossary of Terms  
Wireless Application Protocol. The  
communication standard which enables you to  
download resources from the Internet to your  
phone  
WAP  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Specifications  
Phone  
GSM900 Class 4  
GSM1800 Class 1  
Type  
Temperature range  
Charging  
Storage  
+5°C to +35°C  
-20°C to +60°C  
Phone (Including Battery)  
Weight  
84 g  
Dimensions  
Height x Width x Depth  
125.6 x 45.6 x 14.4mm  
3.7V DC, 650mAh Li-Ion  
Supply Voltage  
Standby Time - Idle Mode (h)  
Talk Time (h)  
Up to 150  
Up to 6.6  
Charge Time (h)  
Up to 1.6  
Note: Charge time will be longer when the phone is turned on.  
Battery life is affected by the network you are using and the  
condition of the battery.  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EU Warranty  
EU Warranty  
EU/EEA-Wide guarantee is applicable in the EU/EEA and Switzerland.  
Panasonic GSM European Service Guarantee Conditions  
Dear Customer,  
Thank you for buying this Panasonic digital cellular telephone. The Panasonic GSM  
European Service Guarantee only applies while traveling in countries other than where the  
product was purchased. Your local guarantee is applicable in all other cases. If your  
Panasonic GSM telephone requires service while abroad, please contact the local service  
company shown on this document.  
The Guarantee  
The applicable period of the European wide guarantee for GSM is generally 12 months for  
the main body and 3 months for the rechargeable battery. With respect to a product used in  
a country other than a country of purchase, notwithstanding what is stated in the conditions  
below, the customer will benefit, in that country of use, from these guarantee periods of,  
respectively, 12 and 3 months, if these conditions are more favorable to him than the local  
guarantee conditions applicable in such country of use.  
Conditions of Guarantee  
When requesting guarantee service the purchaser should present the warranty card  
together with proof of purchase, to an authorized service centre.  
The guarantee covers breakdowns due to manufacturing or design faults; it does not apply  
to other events such as accidental damage, however caused, wear and tear, negligence,  
adjustment, modification or repair not authorized by us.  
Your sole and exclusive remedy under this guarantee against us is the repair, or at our  
option the replacement, of the product, or any defective part or parts. No other remedy,  
including, but not limited to, incidental or consequential damage or loss of whatsoever  
nature shall be available to the purchaser.  
This is in addition to and does not in any way affect any statutory or other rights of consumer  
purchasers. This guarantee applies in countries shown on this document at the authorized  
service centres detailed for that country.  
UK  
Service Centres in the UK  
England:  
Tel. +44 8705 159159  
Panasonic Service Center Berlin  
SERKO GmbH  
Schwedter Straße 34a  
10435 Berlin  
Tel. +49 (0)30/ 44 30 3221  
Panasonic Service Center Berlin  
RUESS SYSTEMS  
Ireland:  
Tel: +353 1 2959966  
Thrasoltstraße 11  
10585 Berlin  
Tel. +49 (0)30/ 342 2013  
D
Panasonic Service Center Rostock  
warnow electronic service gmbh  
An der Jägerbäk 2  
Panasonic Service Center Dresden  
SERKO GmbH  
Großenhainer Straße 163  
01129 Dresden  
Tel. +49 (0)351/ 85 88 477  
18069 Rostock  
Tel. +49 (0)381/ 82 016  
Panasonic Service Center Hamburg  
ELVICE Service GmbH  
Spaldingstraße 74  
Panasonic Service Center Cottbus  
Petsch Kundendienst GmbH  
Am Seegraben 21  
20097 Hamburg  
03058 Gross-Gaglow  
Tel. +49 (0)40/ 23 08 07  
Tel. +49 (0)355/ 58 36 36  
Panasonic Service Center Rendsburg  
FERNSEH-DIENST B&W Service GmbH  
Kieler Straße 41  
Panasonic Service Center Leipzig  
KES Keilitz-Electronic-Service GmbH  
Föpplstraße 19  
24768 Rendsburg  
04347 Leipzig  
Tel. +49 (0)4331/ 14 11-0  
Tel. +49 (0)341/ 244 33 33  
Panasonic Service Center Bremen  
COM Elektronik Service GmbH  
Rübekamp 50  
Panasonic Service Center Chemnitz  
WPS Rundfunk- u. Fernsehservice GmbH  
Zietenstraße 16  
28219 Bremen  
09130 Chemnitz  
Tel. +49 (0)421/ 691 80 69  
Tel. +49 (0)371/ 40 10 359  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
EU Warranty  
Panasonic Service Center Hannover  
COM Elektronik Service GmbH  
Vahrenwalder Straße 311  
30179 Hannover  
A
Service-Zentren in Österreich  
Funk Fuchs GmbH & CoKg Unterhart 90  
4642 Sattledt  
Tel. +49 (0)511/ 37 27 91  
Panasonic Service Center Magdeburg  
SERKO GmbH  
Ebendorfer Chaussee 47  
39128 Magdeburg  
Tel. +49 (0)391/ 289 90 69  
Tel. +43 7244 733  
Funktechnik Seissl  
Dorf 79  
6330 Schwoich  
Tel. +43 5372 8217  
Elektro Oberndorfer  
Linzer Straße 2-4  
4840 Vöcklabruck  
Tel. +43 7672 72889  
Panasonic Service Center Düsseldorf  
VTH GmbH  
Kölner Straße 147  
40227 Düsseldorf  
Tel. +49 (0)211/ 77 90 25  
Panasonic Austria Handelsges.mbH  
Laxenburger Straße 252  
1232 Wien  
Panasonic Service Center Essen  
Bernd van Bevern GmbH  
Heinrich-Held-Straße 16  
45133 Essen  
Tel. +43 222/61080  
Tel. +49 (0)201/ 84 20 220  
FR  
Panasonic Service Center Osnabrück  
Petsch Kundendienst GmbH  
Pagenstecherstraße 75  
CETELEC  
ZI de la Delorme  
49090 Osnabrück  
5 Avenue Paul héroult  
13015 MARSEILLE  
Tél. : 04 96 15 77 77  
Tél. : 04 91 58 07 55  
CORDON Electronique  
BP 460  
Tel. +49 (0) 541/ 68 038  
Panasonic Service Center Wiesbaden  
J. Hemmerling - VAD GmbH  
Ostring 7  
65205 Wiesbaden  
Tel. +49 (0)6122/ 90 91 10  
Panasonic Service Center Mannheim  
N. Schaaf  
Reichenbachstraße 21-23  
68309 Mannheim  
Tel. +49 (0)621/ 72 787-0  
Panasonic Service Center Stuttgart  
Hans Beck  
Friedrich-List-Straße 38  
70771 Leinfelden-Echterdingen  
Tel. +49 (0) 711/ 94 701-0  
ZI Taden  
22107 DINAN CEDEX  
Tél. : 02.96.85.82.20  
Fax : 02.96.85.82.21  
EASY REPAIR  
26 rue des Cosmonautes  
31400 Toulouse  
Tél. : 05.62.71.48.14  
Fax : 05.62.71.48.15  
EASY REPAIR  
22 boulevard des Brotteaux  
69006 Lyon  
Tél. : 04.72.83.02.02  
Fax : 04.78.52.40.38  
Panasonic Service Center Reutlingen  
Herbert Geissler  
Lichtensteinstraße 75  
72770 Reutlingen  
ELECTRONIQUE SERVICE  
Avenue Figuières  
Tel. +49 (0)7072 / 92 96-0  
Panasonic Service Center München  
G.Berghofer & W.Kaller GmbH  
Helene-Wessel-Bogen 7  
80939 München  
ZAC Font de la Banquière  
34970 LATTES  
Tél. : 04.67.15.96.30  
Fax : 04.67.20.04.72  
Tel. +49 (0)89/ 318 907-0  
GENERAL ELECTRONIQUE  
16 rue Joseph Cugnot  
Z.I. Bracheux  
Panasonic Service Center Augsburg  
Klaus Bienek  
Affinger Straße 4  
60000 BEAUVAIS  
86167 Augsburg  
Tél. : 03.44.89.79.00  
Fax : 03.44.05.16.96  
Tel. +49 (0)821/ 70 70 75  
Panasonic Service Center Nürnberg  
Herbert Geissler GmbH  
Friedrich-Ebert-Straße 21  
90537 Feucht  
Négoce Technique etMaintenance  
40 boulevard Bessières  
75017 PARIS  
Tél. : 01.44.85.21.66  
Fax : 01.42.29.60.05  
Tel. +49 (0)9128/ 70 76-0  
Panasonic Service Center Eisenach  
Blitz Elektro-Elektronik-GmbH  
Bahnhofstraße 17  
S.B.E.  
Z.I. de la Liane  
BP 9  
99817 Eisenach  
62360 SAINT LEONARD  
Tél. : 03.21.10.10.21  
Fax : 03.21.80.20.10  
Tel. +49 (0)3691/ 29 29 42 8  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EU Warranty  
PLAY-SHOP SERVICE Keskuskatu 3  
NL  
00100 Helsinki  
Puh. +358 09 27053626  
Service-centra in  
Nederlands  
MEGAFIX KY  
Louhenkatu 9  
Panasonic-Centre Nederland  
(Servicom bv)  
74100 Iisalmi  
Puh. +358 017 14631  
T: MI.M.HAAPOJA  
Miilukatu 7  
40320 Jyväskylä  
Puh. +358 014 677121  
P.O Box 16280  
2500 BG  
Den-Haag  
Nederland  
Tel. +31 703314314  
Zonweg 60  
2516 BM  
OUTOKUMMUN PUHELIN Pohjoisahonkatu  
9
Den-Haag  
83500 Outokumpu  
Puh. +358 013 562211  
SETELE OY  
Rengastie 31  
60100 Seinäjoki  
Puh. +358 06 4148344  
Nederland  
Tel. +31 703314314  
I
Per i Centri Assisitenza in Italia  
Servizio Clienti  
Tel. +39 02/ 67072556  
TURUN J-MARKKINAT OY Tuureporinkatu  
6
20100 Turku  
Puh. + 358 02 2332685  
E
N
Panasonic España, S.A.  
Servicio de Atención a Usuarios:  
Tel: 902 15 30 60  
Servicesenter i Norge  
Norsk Elektronikksenter  
Fetveien 1  
2007 Kjeller  
DK  
For nærmeste servicecenter ring Panasonic  
Danmark  
Tel. +45 43 20 08 50  
Tlf: +47 63 80 45 00  
Panasonic Norge AS  
Østre Aker vei 22  
0508 Oslo  
Tlf: +47 22 91 68 00  
S
GR  
ÊÝíôñá ôå÷íéêÞò õðïóôÞñéîçò  
Firmor i Sverige  
Komrep  
INTERTECH S.A.  
Rosenlundsgatan 4  
411 20 Göteborg  
Tel. +46 031-173354  
International Technologies  
Áöñïäßôçò 26, 167 77 Åëëçíéêü  
Tá÷. Èõñ.: 738 21, 167 10 ÅËËÇÍÉÊÏ  
Ôçë. ÊÝíôñï: (01) 9692.300  
Signalstyrkan  
Kungsholmstorg 4  
104 22 Stockholm  
Tel. +46 08-6542500  
CR service  
Industribyn 3  
232 37 Malmö  
Tel. +46 040-430030  
ÕðïêáôÜóôçìá Âüñåéáò ÅëëÜäáò:  
Ê. ÊáñáìáíëÞ 11, 54638 ÈÅÓÓÁËÏÍÉÊÇ  
Ôçë. ÊÝíôñï: (031) 245.840-3  
P
Centros de Assistência em Portugal  
PAPELACO, S.A.  
Vale Paraiso - Ferreiras  
8200 ALBUFEIRA  
ALGARVE  
SF  
Huoltokeskukset Suomessa:  
KAUKOMARKKINAT OY  
PANASONIC-HUOLLOT Kutojantie 4  
02630 Espoo  
Puh. +358 09 521 5151 Huolto  
Puh. +358 09 521 5155 Varaosat Ja  
Tarvikkeet  
Tel. +351 89 589960  
PAPELACO, S.A.  
Largo de Santos, 9  
1200 LISBOA  
Tel. +351 1 3970539  
PAPELACO, S.A.  
Largo do Tribunal, Lote 11  
2400 LEIRIA  
SETELE OY  
Vanha Viertotie 7  
00300 Helsinki  
Tel. +351 44 28071  
Puh. +358 09 549100  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EU Warranty  
PAPELACO, S.A.  
Rua Cidade de Santos, 31R/C  
9000 FUNCHAL  
L
Centres de service après-vente au  
MADEIRA  
Luxembourg  
Tel. +351 91 231523  
NOUVELLE CENTRAL RADIO  
Rue des Jones 15  
PAPELACO, S.A.  
Rua do Outeiro,  
Lote 25 - Gemunde  
4470 MAIA  
PORTO  
Tel. +351 2 944 0354/9  
L - 1818 Howald  
Luxembourg - Grand Duché  
Tel. +32 40 40 78  
CH  
Jonh Lay Electronics AG  
PAPELACO, S.A.  
Rua Major Leopoldo da Silva,  
Lote 3  
Littauerboden  
3500 VISEU  
6014 Littau  
Phone: +41 41 259 9090 Fax: +41 41 252  
0202  
Tel. +351 32 424771  
B
TR  
Centres de service après-vente en Belgique  
BROOTHAERS  
TEKOFAKS ISTANBUL CENTRE OFFICE  
KAÐITHANE CADDESI SEVÝLEN SOKAK NO. 58  
80340 ÇAÐLAYAN-ISTANBUL  
Hoevelei 167  
2630 AARTSELAAR  
Tel. +32 03/887 06 24  
HENROTTE  
Rue du Campinaire 154  
6240 FARCIENNES  
Tel. +32 071/39 62 90  
Tel: 90-212-220 60 70 / 14 Lines  
Fax: 90-212-220-60 94  
ANKARA BRANCH OFFICE  
GÜVEN MAH.FARABI SOKAK NO: 38/6 06690  
KAVAKLIDERE- ANKARA  
Tel: 90-312-467 30 94/2 Lines pbx  
Fax: 90-312 467 85 38  
PIXEL VIDEOTECH  
Rue St Remy 7  
4000 LIEGE  
ÝSMÝR BRANCH OFFICE  
Tel. +32 041/23 46 26  
CUMHURÝYET BULVARI NO:330 K.:6 D.:608 SEVÝL  
ÝÞ MERKEZÝ 35520 ALSANCAK-ÝZMÝR  
Tel: 90-232-464 29 01 pbx  
DELTA ELECTRONICS  
Rue P.d’Alouette 39  
5100 NANINNE  
Fax: 90-232-422 67 44  
Tel. +32 081/40 21 67  
BURSA BRANCH OFFICE  
ÞEHREKÜSTÜ MAHLLESÝ DURAK CADDESÝ NO.:7  
BURSA  
Tel: 90-224-225 10 46 pbx  
Fax: 90-224-223 81 03  
ELEKSERVICE FEYS Houthulstseweg 56  
8920 POELKAPELLE  
Tel. + 32 057/48 96 37  
AVS WAASLAND Lavendelstraat 113  
9100 ST NIKLAAS  
Tel. +32 03/777 99 64  
ADANA BRANCH OFFICE  
REÞATBEY MAH.FUZULÝ CAD.GÜLEK SÝTESÝ A  
BLOK NO: 75b 01120 ADANA  
Tel: 90-322-458 39 52 pbx  
A.V.T.C SA  
Kleine Winkellaan 54  
1853 STROMBEEK-BEVER Tel. + 32  
02/267 40 19  
Fax: 90-322-453 21 32  
TRABZON BRANCH OFFICE  
MARAÞ CAD.MARAÞ APT.NO:51 D.:2 61200  
TRABZON  
Tel: 90-462-321 33 08  
Fax: 90-462-326 37 78  
ANTALYA BRANCH OFFICE  
ALTINDAÐ MAH. 146 SOKAK ÖZKOÇ  
APT.NO:9/1-2A ANTALYA  
Tel: 90-242-243 23 70 / 3 Lines  
Fax: 90-242-243 23 72  
RADIO RESEARCH  
Rue des Carmélites 123  
1180 BRUXELLES  
Tel. +32 02/345 68 56  
VIDEO TECHNICAL SERVICE  
Av. du Roi Albert 207  
1080 BRUXELLES  
Tel. +32 02/465 33 10  
SERVICE CENTER Kapellestraat 95  
9800 DEINZE  
DÝYARBAKIR BRANCH OFFICE  
LÝSE CADDESÝ GÖKALP APT.NO: 18/A  
DÝYARBAKIR  
Tel. +32 09/386 76 67  
Tel: 90-412-228 73 00  
TOP SERVICE  
Fax: 90-412-223 59 00  
Westerloseweg 10  
2440 GEEL  
Tel. +32 014/54 76 24  
TELECTRO SC  
Quai des Ardennes 50  
4020 Liège  
Tel. +32 041/43 29 04  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EU Warranty  
EU/EEA-Wide Guarantee: Conditions applicable in any country other than the country  
of original purchase.  
A
When the purchaser finds the appliance to be defective, he should promptly contact the  
proper sales company or national distributor in the EU/EEA country where this  
guarantee is claimed, as indicated in the “Product Service Guide” or the nearest  
authorized dealer together with this guarantee and proof of date of purchase.  
The purchaser will then be informed whether:  
(i) the sales company or national distributor will handle the repair service: or  
(ii) the sales company or national distributor will arrange for trans-shipment of the  
appliance to the EU/EEA country where the appliance was originally marketed; or  
(iii) the purchaser may himself send the appliance to the sales company or national  
distributor in the EU/EEA country where the appliance was originally marketed.  
B
C
If the appliance is a product model which is normally supplied by the sales company or  
national distributor in the country where it is used by the purchaser, then the appliance,  
together with this guarantee card and proof of date of purchase, should be returned at  
the purchaser’s risk and expense to such sales company or distributor, which will  
handle the repair service. In some countries, the affiliated sales company or national  
distributor will designate dealers or certain service centres to execute the repairs  
involved.  
If the appliance is a product model which is not normally supplied in the country where  
used, or if the appliance’s internal or external product characteristics are different from  
those of the equivalent model in the country where used, the sales company or national  
distributor may be able to have the guarantee repair service executed by obtaining  
spare parts from the country where the appliance was originally marketed, or it may be  
necessary to have the guarantee repair service executed the sales company or national  
distributor in the country where the appliance was originally marketed.  
In either case, the purchaser must furnish this guarantee card and proof of date of  
purchase. Any necessary transportation, both of the appliance and of any spare parts,  
will be at the purchaser’s risk and expense, and there may be a consequent delay in the  
repair service.  
D
E
F
Where the consumer sends the appliance for repair to the sales company or national  
distributor in the country of use of the appliance, the service will be provided on the  
same local terms and conditions (including the period of guarantee coverage) as prevail  
for the same model appliance in the country of use, and not the country of initial sale in  
the EU/EEA. Where the consumer sends the appliance for repair to the sales company  
or national distributor in the EU/EEA country where the appliance was originally  
marketed, the repair service will be provided on the local terms and conditions  
prevailing in the country of initial sale in the EU/EEA.  
Some product models require adjustment or adaptation for proper performance and  
safe use in different EU/EEA countries, in accordance with local voltage requirements  
and safety or other technical standards imposed or recommended by applicable  
regulations. For certain product models, the cost of such adjustment or adaptation may  
be substantial and it may be difficult to satisfy local voltage requirements and safety or  
other technical standards. It is strongly recommended that the purchaser investigates  
these local technical and safety factors before using the appliance in another EU/EEA  
country.  
This guarantee shall not cover the cost of any adjustments or adaptations to meet local  
voltage requirements and safety or other technical standards. The sales company or  
national distributor may be in a position to make the necessary adjustments or  
adaptations to certain product models at the cost of the purchaser. However, for  
technical reasons it is not possible to adjust or adapt all product models to comply with  
local voltage requirements and safety or other technical standards. Moreover, where  
adaptations or adjustments are carried out the performance of the appliance may be  
affected.  
G
If in the opinion of the sales company or national distributor in the country where the  
appliance is used the purchaser has the necessary adjustments or adaptations to local  
voltage requirements and technical or safety standards properly made, any subsequent  
guarantee repair service will be provided as above indicated, provided the purchaser  
discloses the nature of the adjustment or adaptation if relevant to the repair. (It is  
recommended that the purchaser should not send adapted or adjusted equipment for  
repair to the sales company or national distributor in the country where the appliance  
was originally marketed if the repair relates in any way to the adaptation or adjustment).  
H
This guarantee shall only be valid in territories subject to the laws of the European  
Union and the EEA.  
Please keep this guarantee with your receipt.  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E-mail Settings  
Use the table below to record your E-mail settings. The list may vary  
depending on the Internet Service Provider.  
Item  
Hint  
Current Setting  
Profile Name  
Mail Account  
Service Provider Name  
Your E-mail Address  
Domain Name or IP  
Address  
SMTP Server  
POP3 Server  
Domain Name or IP  
Address  
POP3 Account  
Password  
Reminder of Password  
Leave/Delete Message*  
Phone Number  
Mail Delivery  
Access Point  
Circuit Type  
User ID  
Analog or Digital  
Your name (or alias)  
User  
Password  
Reminder of Password  
IP Address  
Primary DNS  
Secondary  
DNS  
IP Address  
* This function allows e-mail messages to either be removed from the  
server when they have been downloaded to the phone, or they can  
be left on the server.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WAP Settings  
Use the table below to record your WAP settings.  
Item  
Hint  
Current Setting  
Name  
WAP Server Name  
URL of Server  
On or Off  
Home URL  
Security  
Circuit Type  
Digital Dial #  
Analog Dial #  
PPP ID  
Analog or Digital  
Phone Number  
Phone Number  
Name  
PPP  
Password  
Password  
Gateway IP  
IP Address  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Serial Number can be found on the outside of the phone  
under the battery. For your convenience we recommend that you  
note the following details as a record of your purchase.  
Part Number  
Serial Number  
Dealer Name  
Purchase Date  
BULL CP8 PATENT  
© Matsushita Communication Industrial UK Limited 2001  
Information in this document is subject to change without notice. No part of  
these instructions may be reproduced or transmitted in any form or by any  
means without obtaining express permission from Matsushita Communication  
Industrial UK Limited  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GD95DPK11A  
Printed in UK  
01.257  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Washer W 916 User Manual
Milnor Washer KLWRACLR01 User Manual
Milwaukee Glue Gun 2446 21XC User Manual
MTD Snow Blower Series 140 thru 152 User Manual
Nady Systems Microphone USB 5H User Manual
Nikon Digital Camera SB 28D User Manual
Niles Audio Camera Accessories CAM DFMK User Manual
NordicTrack Home Gym NTM58020 User Manual
NordicTrack Treadmill NTL10851 User Manual
Panasonic Camcorder AG DVX100P User Manual