Panasonic Cell Phone EB GD75 User Manual

Operating Instructions

Digital Cellular Phone

EB-GD75

Before operating this equipment please read these instructions

completely.

Download from Www.Somanuals.com. All Manuals Search And Download.

Important Information

We, Matsushita Communication Industrial UK Ltd., declare, that the

EB-GD75 conforms with the essential and other relevant requirements of

the directive 1999/5/EC. A declaration of conformity to this effect can be

found at http://www.panasonicmobile.co.uk/support

Safety Considerations

The following information should be read and understood as it provides

details which will enable you to operate your phone in a manner which is

both safe to you and your environment, and conforms to any legal

requirements regarding the use of cellular phones.

This equipment should only be charged with approved charging

equipment. Other usage will invalidate any approval given to this

apparatus and may be dangerous. The use of approved charging

equipment is recommended to ensure optimum performance

and avoid damage to your phone. Ensure the voltage rating of

the Travel Charger is compatible with the area of use when

travelling abroad.

A Travel Charger (EB-CAD92Vxx* or EB-CAD95xx*) is

supplied with the Main Kit. Other recommended equipment for

charging -Car Charger (EB-CDD95),Handsfree Car Kit

(EB-HFD75Z).

Note* xx identifies the Charger region, e.g. CN, EU, HK, UK.

Switch off your cellular phone when in an aircraft. The use of

cellular phones in an aircraft may be dangerous to the operation

of the aircraft, disrupt the cellular network and may be illegal.

Failure to observe this instruction may lead to the suspension or

denial of cellular phone services to the offender, or legal action

or both.

It is advised not to use the equipment at a refuelling point. Users

are reminded to observe restrictions on the use of radio

equipment in fuel depots, chemical plants or where blasting

operations are in progress. Never expose the battery to

extreme temperatures (in excess of 60°C).

Download from Www.Somanuals.com. All Manuals Search And Download.

Important Information

It is imperative that the user exercises proper control of your

vehicle at all times. Do not hold a phone while you are driving;

find a safe place to stop first. Do not speak into a Handsfree

microphone if it will take your mind off the road. Always

acquaint yourself thoroughly with restrictions concerning the use

of cellular phones within the area you are driving and observe

them at all times.

Care must be taken when using the phone in close proximity to

personal medical devices, such as pacemakers and hearing aids.

For most efficient use hold the phone as you would any normal

phone. Your GD75 cellular phone is fitted with an internal

antenna, located in the upper portion of the phone, above the

display screen. To avoid deterioration of signal quality or

antenna performance, do not touch the antenna area while the

phone is switched on. Unauthorized modifications or

attachments may damage the phone and violate applicable

regulations. The use of an unapproved modification or

attachment may result in the invalidation of your guarantee –

this does not affect your statutory rights.

This Panasonic mobile phone is designed, manufactured and

tested to ensure that it complies with the specifications covering

RF exposure guidelines applicable at the time of manufacture, in

accordance with EU, USA FCC, and Australian ACA regulations;

or as specifically stated in the separate declaration leaflet

enclosed with this product.

Please refer to our website for latest information/standards

compliance in your country/region of use.

www.panasonicmobile.co.uk/2001/health

Download from Www.Somanuals.com. All Manuals Search And Download.

Care and Maintenance

Pressing any of the keys may produce a loud tone. Avoid holding

the phone close to the ear while pressing the keys.

Extreme temperatures may have a temporary effect on the

operation of your phone. This is normal and does not indicate a

fault.

Do not modify or disassemble the equipment. There are no user

serviceable parts.

Do not subject the equipment to excessive vibration or shock.

Avoid contact with liquids. If the equipment becomes wet

immediately remove the power and contact your dealer.

Do not leave the equipment in direct sunlight or a humid, dusty

or hot area.

Keep metallic items that may accidentally touch the terminals

away from the equipment.

Always charge the battery in a well ventilated area, not in direct

sunlight, between +5°C and +35°C. It is not possible to

recharge the battery if it is outside this temperature range.

Do not incinerate or dispose of the battery as ordinary rubbish.

The battery must be disposed of in accordance with local

legislation and may be recycled.

When disposing of any packing materials or old equipment

check with your local authorities for information on recycling.

iii

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Reference

"Press (

) to select".

Direction which the user can move around the display

screen using the Navigation key.

abcd

Press a key once for a particular phone operation.

+Hold “Press and hold” a key for a particular phone function.

Representation of screen menu option.

Phonebook key.

Right hand Option Key.

Numeric key pads.

1 - 0

Answer a call or call a dialled number.

To end a call or return to Idle screen or

to switch the phone off.

+Hold

Indicates that a function is SIM Dependent.

Indicates that a function is Network Dependent.

Switches Discreet Mode on and off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Safety Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii

Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i

Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Fitting the SIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Removing the SIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Fitting the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Removing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Operation of Battery Level Indicato r . . . . . . . . . . . . . . . . . . . . . . . . . 3

Disconnecting the Fast Travel Charger. . . . . . . . . . . . . . . . . . . . . . . . 3

Low Battery Warnin g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Getting to Know Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

The Menu System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Display Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Navigation Prompt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Using the Menu System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

To Select a Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Switching the Phone On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

International Dialling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Automatic Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Ending a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Caller Identificatio n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Earpiece Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Locking the Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Using the PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Setting Vibration Alert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Setting Discreet Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Setting Ring and Key Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Store a Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Overwrite Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Browsing Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Retrieve a Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Editing Phonebook Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Grouping Phonebook Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

My Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Personalising Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Add a Start-up Greetin g . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 9

Download Melody. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Logos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Setting the Backlight Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Using Voice Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Voice Dial Entry Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Recalling Voice Dial Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Download from Www.Somanuals.com. All Manuals Search And Download.

Dialling Voice Dial Entrie s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3

Editing the Voice Dial Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Changing the Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Restoring the Default Phone Settings . . . . . . . . . . . . . . . . . . . . . . . . 24

Phone Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Using Key Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Disabling Key Guard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Changing the Security Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Restricting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Initially Setting the Home Time . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Setting the Clock Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Altering the Time/Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Setting the Clock for Summer Time . . . . . . . . . . . . . . . . . . . . . . . . 29

Setting the Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Muting the Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Setting a Power On/Off Tim e . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 0

Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Currency Convertor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Text Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Setting the Phone for Short Text Message s . . . . . . . . . . . . . . . . . . . . . 3 2

Setting the Message Centre Number . . . . . . . . . . . . . . . . . . . . . . . . 32

Creating a Text Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Receiving Text Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Message Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Cut / Copy & Paste Message Text . . . . . . . . . . . . . . . . . . . . . . . . . 34

Manage Messages Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Call Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Recent Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Call Duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Call Charge s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 8

Setting the Unit Price . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Setting the Maximum Unit Level . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Setting a Warning Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Call Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Advanced Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Diverting Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Holding Calls and Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Making a Second Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Receiving a Second Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Accept a Second Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Reject a Second Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

End Current Call and Receive Second Call . . . . . . . . . . . . . . . . . . . . . 41

Operation During Two Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Call Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Multi-party Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Adding to Multi-party . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Splitting a Multi-party . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Ending Multi-party Call s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3

Ending a Multi-party Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Changing to a New Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Download from Www.Somanuals.com. All Manuals Search And Download.

Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Creating a Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Viewing Reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Deleting Reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Deleting Holiday Reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Jump to Future Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Racing Game . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Ball Game . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

WAP Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Server Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Activating the Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Navigating Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

The Browser Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Using Bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Deactivating the Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Setting the Linger Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Last Error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Additional Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Desktop Handsfree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Voice Memo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Record a Voice Memo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

DTMF Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Note Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Second Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Setting Clock Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Text Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

T9^®Text Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Other Text Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Editing Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Menu Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Important Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Phone (Including Battery)^*. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Personal Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

WAP Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Note s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 7

vii

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Started

Thank you for purchasing this Panasonic digital cellular phone. This phone is

designed to operate on the Global System for Mobile Communications

(GSM), GSM900 or GSM1800. Ensure the battery is fully charged before

use.

Before operating this phone please read the “Important Information”

section - see page i.

These operating instructions detail use of the equipment contained in the

Main Kit.

Some services detailed, are network dependent and are indicated by

(

)or may only be available on a subscription basis. Some functions are

SIM dependent and are indicated by (Q). For more information contact

the Service Provider.

Fitting the SIM

The SIM is inserted into the

back of the phone underneath

the battery. Remove the

battery - see “Removing the

Battery” page 2. Unlock the

SIM retainer by sliding it up

towards the top of the phone

(1). Gently lower the SIM

retainer. Place the SIM into its

recess, ensuring the bevelled

corner is positioned in the top

left corner (2). Move the SIM

retainer back into position and

secure by sliding downwards.

The SIM retainer is properly

locked when it has clicked into

position (3).

Note: Ensure the SIM retainer is properly locked into position. Failure to

do so will inhibit the fitting of the battery and the battery cover.

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Started

Removing the SIM

Unlock the SIM retainer by

gently pushing towards the top

of the phone (1). Gently lower

the SIM retainer (2) and remove

the SIM (3). Ensure the SIM

retainer is correctly locked

before re-fitting the battery and

battery cover.

Fitting the Battery

Ensuring the label is uppermost,

locate the two lugs at the top of

the battery into the rear of the

phone (1). (The base of the

battery will stay slightly raised at

this point). Locate the two lugs

at the top of the battery cover

into the rear of the phone (2).

Using light pressure, push the

bottom of the battery cover into

place and lock by pushing up on

the battery cover release clip (3).

Removing the Battery

Push the battery cover release clip down (1). The base

of the battery cover will raise out of the recess (2).

Remove the battery cover. The battery can now be

removed from the phone (3).

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Started

Charging the Battery

Connecting the Fast Travel Charger

The battery must be fitted in the phone before

the charger is connected. Ensuring the arrows on

the plug are to the front of the phone. Insert the

charger into the base of the phone.

Note: DO NOT force the connector as this may damage the phone and/or

the charger.

Connect the charger to the mains power supply. The charging indicator will

light and the battery level indicator will scroll right to left when charging.

Operation of Battery Level Indicator

While charging

Charging complete

Phone on

Phone off

LCD Battery

Indicator off

When charging is complete turn off the mains power supply and disconnect

the charger from the phone. See “Disconnecting the Travel Charger”page

3 .

Disconnecting the Fast Travel Charger

Disconnect the charger from the mains power supply.

Squeeze together the two buttons on the plug of the

charger (1) and while maintaining pressure extract the

plug from the base of the phone (2).

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Started

Low Battery Warning

When the battery power is low a warning tone will sound and a flashing

LOW BATTERY message will be displayed. If this occurs during

conversation, finish your call immediately. The power will automatically

shut off after the warning tone. Fully recharge the battery. See “Charging

the Battery” page 3. (Calls can be made and received while the phone is

charging)

It is recommended that the battery is fully discharged between charges to

maintain optimum battery life and performance.

Getting to Know Your Phone

Location of Controls

Navigation Key

Earpiece

Microphone

Display

Earpiece/Microphone

Socket

External Connector

Navigation key - moving up/down/left/right navigates through the

options in the Main Display area. Pressing this key activates the

function currently displayed in the Main Option area

Cancel key - this key is mainly used to cancel the current

operation and return to the previous menu level. In certain menus

it has other functions

Primarily used for accessing the Phonebook or switching character

types

Makes a call or recalls recently dialled phone numbers

Ends a call or

on/off

+ Hold enables the user to switch the phone

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Started

Digit keys

and

–

will switch on and off

9 *

Discreet Mode

The Menu System

The menu system allows the user to access all the functions of the phone

that are not accessible purely by key strokes.

Display Icons

Following some operations the display will automatically clear after three

seconds or after pressing any key.

Information Area

Main Display

Status Icons

Secondary

Option Area

Main Option

Area

Navigation Prompt

Status Icons

The status icons are displayed according to the currently activated

functions. The Antenna, Signal and Battery icons are displayed when the

handset is switched on and connected to a network.

is displayed when you are registered to a non-home network -

roaming

is displayed when call divert is enabled

is displayed when vibration alert is enabled

is displayed when Discreet Mode is enabled

is displayed when all tones or ring volume is off

]

[

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Started

flashes when an unread message is stored or lights when

message area is full

is displayed when phone lock is enabled

indicates that it is possible to make emergency calls

indicates the received signal strength:

strong signal

- weak signal,

indicates the battery level:

- full,

(flashing) - low battery

Information

Icons are used to indicate the current top level menu, the sub-menu

number, text entry mode, Phonebook source, Phonebook location number,

or the alarm set icon depending on the current mode of operation.

indicates alarm is set

indicates current Phonebook entry is sourced from the Mobile

Phonebook

indicates current Phonebook entry is sourced from the SIM

Phonebook

Navigation Prompt

This area indicates the available directions in which the

Navigation key can be pressed according to the current mode of

operation

Using the Menu System

The menu system provides the means for accessing all the functions which

do not have their own dedicated buttons on the keypad.

The menu functions are selected using the five-way Navigation key.

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Started

To Select a Function

then use the navigation key as a joystick to move around the icons

Z Q

on the screen in any of the four directions ( , ,

). When a particular

a b c d

menu is highlighted,

, and a submenu is displayed. From any

Z Q

submenu, use until the required item is highlighted,

Z Q

Example:

From Idle

Animation

, select Personalise > Display Setting >

Z Q

In detail:

to enter the menu system

to highlight the Personalise menu

to enter the menu

Z Q

Use

Z Q

Use three times to highlight the Display Setting menu

to enter the menu

Z Q

Use twice to highlight Animation menu

to enter the menu

Z Q

Use to select Off, Theme 1 or Theme 2

Z Q

Following some operations the display will automatically clear after three

seconds, if this is not the case

to return to Idle.

Z E

Shortcuts

When familiar with the layout of the menu, use the keypad to enter the

Menu Number. This will allow the user to obtain the required function

without having to navigate through the display menus. For example,

to enter the menu and then

to take you directly to

143

the Animation menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operation

Switching the Phone On/Off

To switch the phone on or off

+Hold

When the phone is switched on a greeting will be displayed and then the

phone will go into Idle.

Making a Call

Ensure that the phone is switched on, the network operator logo is

displayed and the signal strength meter shows network coverage is available

in the current area.

Enter area code and phone number

Z D

International Dialling

List:

Using the automatic international access code (+)

you will be able to dial international numbers

without having to know the code for the

international exchange.

UKR

URY

If the international number is known then it can be

entered in the normal fashion followed by the area

code and phone number.

From Idle

displayed

+ Hold

until “+” is

Use to cycle through the abbreviated

international names

to choose the required code

Z Q

Enter area code and phone number

Z D

Note: Many countries / regions include an initial “0” in the area code. This

should, in most cases, be omitted when dialling international numbers. If

you have difficulties making international calls, contact your Service

Provider.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operation

Emergency Calls

To make an emergency call the antenna symbol ( ) must be present.

Enter 112

or if no SIM is fitted to the phone

Z QaQ

Z D

Automatic Redial

When a call is unsuccessful you may want the phone to redial the number

again automatically.

When your connection is unsuccessful,

when

is displayed and

Z Q

a timer will countdown in seconds to the next redial.

To stop redialling, press when is displayed in the main option

Cancel

area or

when is displayed in the secondary option area.

When a call is connected a beep will be emitted.

If a call is repeatedly unsuccessful you will not be able to automatically redial

the phone number. In this case you must redial the phone number

manually.

Ending a Call

Press

Answering a Call

To receive a call the phone must be switched on and the signal strength

meter must be displayed.

any key except

to answer a call

to reject the call

Z E

during an incoming call, and you will be given the option to

Z Q

Accept or Reject the call. Use to select an option and

Z Q

If a call is not answered, or is rejected, the number of incoming calls missed

will be displayed.

any key to clear the display

Caller Identification

This feature allows you to identify incoming calls and accept or reject them.

The caller’s phone number, and name if stored in Phonebook, will be

displayed.

Note: Caller Identification may not always be available.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operation

Earpiece Volume Control

The volume level may be adjusted during a call:

Use to decrease the volume, use to increase the volume

Note: Volume control for Personal Handsfree accessory is adjusted in the

same manner.

Locking the Phone

With the Phone Lock enabled you will be restricted

to answer incoming calls and make emergency calls

only. The Phone Lock Code is factory set to “0000”.

From Idle

, select Phone Menu

Z Q

> Security > Phone Lock

Z Q

Select Enable

Z Q

Enter the 4-digit code,

Z Q

The phone will be locked and the lock icon ( ) will

be displayed.

Unlocking the Phone

To restore normal operation, enter your Lock Code

icon will be removed from the display. However, once you turn the phone

off and on again the Lock Code will need to be re-entered. When the

. The lock

Z Q

correct code has been entered

Z Q

Disabling Phone Lock

The phone must be unlocked before the phone lock can be disabled.

From Idle

, select Phone Menu > Security > Phone

Z Q

Lock

Z Q

Select Disable

Z Q

Enter the 4-digit code

Z Q

Using the PIN

The PIN (Personal Identification Number) protects your SIM against

unauthorized use. If you enable the PIN, every time the phone is turned on

you will be prompted to enter the PIN.

The PIN2 controls security for the Fixed Dial Store, Call Charge metering

and Barred Dial.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operation

Enabling/Disabling the PIN

From Idle

, select Phone Menu > Security > PIN

Z Q

Use select Enable / Disable or Change PIN

Z Q

Enter PIN (Between 4 and 8 digits)

Z Q

Setting Vibration Alert

When required, the phone can be set up to vibrate when a call is received.

Vibration alert enables the user to choose between Continuous,

Intermittent vibration alerts when a call is received. Switching on vibration

alert will silence the ring volume. If, however, the ring volume is adjusted

after the vibration alert is switched on, or the Discreet Mode is switched

on, (see “Setting Discreet Mode” page 11 ) and its profile enables ring

tones, the phone will ring and vibrate when a call is received.

From Idle

, select Personalise > Vibration Alert.

Z Q

Choose the vibration setting required, Continuous, Intermittent

or Disable,

Z Q

When activated, the phone will vibrate briefly.

Note: When Discreet Mode is enabled, it’s profiles will supercede those of

the Vibration alert.

Setting Discreet Mode

Discreet Mode will allow the user to choose between “Vibrate only”, “ring

tone only” or both.

From Idle

select Personalise >

Z Q Discreet Mode

Z Q

Use to select Ring Volume or Vibration

Z Q

Use to select the required vibration type or ring tone volume

to select the required vibration type or ring tone volume

Z Q

+ Hold

Note: If the ring tone volume is increased beyond “Max” volume it will set

an escalating ring tone.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operation

Setting Ring and Key Volume

Changing either the ring volume/key volume is done in the same manner. If

you increase the ring volume above maximum it will set an escalating ring

tone. If you turn the ring volume off, the silent indicator icon ( ) will be

[

displayed.

From Idle

, select Personalise > Tones

Z Q

Select Ring Volume or Key Volume

Z Q

Use to set the volume level

Z Q

Download from Www.Somanuals.com. All Manuals Search And Download.

Phonebook

It is possible to store phone numbers in two locations:

In the SIM Phonebook (Q)

In the Mobile Phonebook. This means that if you change the SIM, the

numbers in the phone are not lost

The Mobile Phonebook has the advantage that you can group your

phonebook entries together.

Store a Number

To Store a Number in the SIM Phonebook

From Idle enter the phone number and

press

Location:

(1-100)

To select SIM Phonebook

Z Q

Enter the name – see “Text Entry” page 56,

twice

Z Q

Enter location number

You can choose not to enter a location number

0-9

Any

Z Q

and the entry will be placed in the next available location. Simply

when

is displayed.

Any

To Store a Number in the Mobile Phonebook

From Idle enter the phone number and

Group Name:

Z A

Use to select Mobile Phonebook and

<1>

<2>

<3>

Z Q

Enter the name - see “Text Entry” page 56,

Select

Z a

Confirm phone number

twice

Z Q

Use to select a group - see “Grouping

Phonebook Entries” page 16 - into which to

place the entry

Z Q

Enter location number

Z Q

A location number does not have to be specified, in this case the entry will

be placed in the next available location. Simply

displayed.

when

Any

Z Q

Download from Www.Somanuals.com. All Manuals Search And Download.

Phonebook

Overwrite Protection

If a location is occupied, a prompt will be displayed to confirm that the

current information is to be overwritten.

to overwrite the selected location

Z Q

to choose another location number

Z B

Note: If you amend an entry stored in your phonebook that has a Voice

Dial Command assigned to it, you will need to delete and reassign that

Voice Dial Command - see “Editing the Voice Dial Entries” page 23.

Browsing Phonebook

You can search the Phonebook by either Name or Location. The default

setting for browsing is by name. When browsing by name pressing a

lettered key will take you to the first entry starting with that letter.

From Idle

, select Phonebook > Browse

Z Q Z Q

Use to toggle between Names or Loc. Nos. display mode

Z Q

Use to select the Phonebook you wish to browse

Z Q

Retrieve a Number

From Idle

Z A

Use to browse through the Phonebook

Once you have selected a phone number or name, there are a number

of actions that you can perform. To dial the selected number

Note: The Phonebook you last viewed will be the default when you next

press

. To change the default, use the Phonebook menu to select a

particular phonebook.

Speed Dial a Number Stored in SIM Phonebook

From Idle Enter location number – leading zeros may be left out

Z #

Z D

Editing Phonebook Entries

It is possible to Detail, View, Recall, Edit, Delete or Create

information in the Phonebook. To access any of these functions follow the

same procedure for each one. With a phone number or name displayed:

Download from Www.Somanuals.com. All Manuals Search And Download.

Phonebook

Detail

Displays each element of the selected Phonebook entry. Use to display

the next/previous element of the entry. Each element may be edited -

, edit as required

twice to save any changes.

Z QaQ

Z Q

View

Displays an individual name and phone number in the names list.

If an e-mail address is present in the Mobile Phonebook this will be

displayed along with the name and number.

Recall

Displays the phone number, enabling you to either change it or call the

number.

Edit

Displays the entry allowing you to make changes as required.

twice to save any changes.

Z Q

Delete

Deletes the entry from the Phonebook.

Create

Creates a new entry in the Phonebook

Use to cycle through Detail, View, Recall, Edit, Delete or

Create

to select an option

Z Q

Download from Www.Somanuals.com. All Manuals Search And Download.

Phonebook

Grouping Phonebook Entries

The ability to group phonebook entries together is an extra function of the

Mobile Phonebook.

Retrieving a Number from a Group

Groups are used to collect together types of Phonebook entries, for

example business and personal. Each group can be suitably titled for quick

access to the entries contained within.

An alert profile can be attributed to groups, or a phone number, thus

allowing incoming calls to be tailored to indicate the type of caller. See

“Using Alert Profiles” page 16.

From Idle

, select Phonebook > Group Setting and

Z Q

or from Idle

twice

Z Q

Z A

Use to select the group

twice

Z Q

Use to select the entry required

twice to recall the

Z Q

number

Retitling Group Names

From Idle

, select Phonebook > Group Setting

Z Q

Use to select the group required

Z Q

Use to select Edit

Z Q

Clear the current title and re-enter - see “Text Entry” page 56

twice to save any changes

Z Q

Using Alert Profiles

Alert Profile enables you to identify callers with a particular ring tone,

display picture, making it easier to distinguish between callers or groups of

callers.

Creating an Alert Profile

From Idle

, select Phonebook > Alert Profile

Z Q

twice to insert a new profile

Z Q

Use to select Personal or Group

Z Q

Recall the phone number / select group from the Phonebook – see

“Retrieve a Number” page 14

Z Q

Download from Www.Somanuals.com. All Manuals Search And Download.

Phonebook

Use to select the ring tone that you wish to use for this profile

Z Q

Use to select the picture

Z Q

Hot Key Phone Numbers

It is possible to dial phone numbers from the Phonebook or Service Dial

part of Phonebook very quickly. Some Hot Key Phone numbers may be

reserved by the Service Provider, for example the first three Hot Key

Phone numbers may be linked to Service Dial (

+ Hold a Digit key

Z D

Setting the Hot Key Dial Source

From Idle

, select Phonebook > Hot Key Dial

Z Q

Use to select SIM Phonebook or Mobile Phonebook and

Z Q

Service Dial Numbers

Your Service Provider may program some special phone numbers into your

SIM (

). It is not possible to modify the Service Dial numbers.

+ Hold

to browse through the Service Dial list of phone numbers

Z e

The phone number pointed to can only be recalled or dialled.

Review the Phonebook

The Review function in the Phonebook menu shows how many locations

are available in the Phonebook.

From Idle

, select Phonebook > Review

Z Q Z Q

Use to select SIM Phonebook or Mobile Phonebook

Z Q

A summary of the selected Phonebook will be displayed.

Use to gain a detailed view of the Phonebook locations.

Occupied locations are shown with “ ”

Download from Www.Somanuals.com. All Manuals Search And Download.

My Numbers

My Numbers is a convenient part of Phonebook where voice, fax and data

phone number(s) can be stored and viewed. (Q)

Adding Numbers

From Idle

, select Phonebook > My Numbers

Z Q

twice

Use until Create is displayed

Enter the name - see “Text Entry” page 56, and use

Z Q

Note: If using T9^®text input then move

alternative word will be selected.

before moving otherwise an

Enter the phone number

Enter location number or select

twice

Z Q

Any

Z Q

Viewing Stored Numbers

From Idle

, select Phonebook > My Numbers

Z Q

If more than one number is available then use to cycle through

the listed numbers

Download from Www.Somanuals.com. All Manuals Search And Download.

Personalising Your Phone

Add a Start-up Greeting

A personalised greeting can be programmed for when the phone is

switched on.

From Idle

Greeting

, select Personalise > Display Setting >

Z Q

Use the text entry facility to add a greeting

“Text Entry” page 56

twice - see

Z Q

Displaying Animations

Animations can be displayed when the phone is switched on.

From Idle

, select Personalise > Display Setting >

Z Q

Animation

Z Q

Use to cycle through the animated themes available

to select either the desired theme, or switch off the

Z Q

animation

Changing the Ring Tone

The ring tones of the phone can be changed to one of many pre-defined

sounds or to a voice ringer. (a voice recording used as a ring tone)

Each voice, fax, data and message can have a different ring tone.

Alternatively you can use the Melody Composer to generate a custom ring

tone. See “Composing a Melody" page 20.

Setting up a Pre-defined Ring Tone

It is possible to choose from a selection of tones and melodies.

From Idle

, select Personalise > Tones > Ring

Z Q

Type

Z Q

Use to select the appropriate call type to be changed

Z Q

Use to select the desired ring tone

Z Q

Recording a Voice Ringer

From Idle

, select Personalise > Tones > Voice

Z Q

Ringer

Z Q

Use to select the appropriate voice ringer to be changed

Download from Www.Somanuals.com. All Manuals Search And Download.

Personalising Your Phone

, start speaking into the microphone. The recording will

Z Q

stop automatically, or before if

is selected

To playback the recording use to select the appropriate voice

ringer

, select Playback

Z Q

Composing a Melody

From Idle

, select Personalise > Tones > Melody

Z Q

Composer

Z Q

Using the following table as reference, enter the notes (from the choice of

low, middle and high), rests, and the durations of each, to generate your

composition.

Note: At any time during composing press

melody.

to play back the current

When the composition is complete

twice to save it.

Z Q

Key

1st

press

2nd

press

3rd

press

4th

press

5th

press

6th

press

low C

low D

high E

low F

low G

low A

low C#

low D#

high C

high D

high C#

high D#

low E

low F#

low G#

low A#

high F

high G

high A

high F#

high G#

high A#

low B

rest

1/8

1/16

1/1

1/4

1/16

1/8

Download from Www.Somanuals.com. All Manuals Search And Download.

Personalising Your Phone

Editing your Melody

Once the melody has been saved the following operations can be used for

re-editing purposes:

to delete the character to the left of the cursor

Z B

Use to navigate the cursor around the screen

Use the relevant keys to insert new notes/rests

Disabling all Tones

From Idle

, select Personalise > Tones

Z Q

to disable all tones. When Idle is resumed the silent

Z Q

indicator icon ( ) will be displayed

[

Repeat the process to enable all tones

Download Melody

Melodies may be downloaded to the phone from the Internet, via short text

messages.

For further information see:

http://www.panasonicmobile.co.uk/support/ringtones

Downloaded melodies overwrite pre-defined ring tone numbers 16-20.

When a message has been received containing a melody:

to acknowledge receipt of the melody

Z Q

Use to select the ring tone number to overwrite

twice

Z Q

The melody is now stored and can be selected as a pre-defined ring

tone.

Logos

Logos may be downloaded to the phone from the Internet, via short text

messages.

For further information see:

http://www.panasonicmobile.co.uk/support/logos

Downloaded logos overwrite 5 pre-defined logos in the logo menu.

When a message has been received containing a logo:

to acknowledge receipt of the logo

Z Q

Use to select the logo location

twice

Z Q

Download from Www.Somanuals.com. All Manuals Search And Download.

Personalising Your Phone

The logo is now stored and can be selected as an idle screen option from

the Personalise menu.

Setting the Backlight Time

From Idle

Backlight Time

, select Personalise > Display Setting >

Z Q

Use to cycle through the times available

to select the desired time

Z Q

Using Voice Commands

Before any of the phone’s voice activated functions can be used, it is

necessary to configure the phone so that it will recognize a particular voice

and intonation.

Voice Dial Entry Setup

This function allows the user to recall and dial numbers from the

Phonebook using voice commands.

From Idle

, select Personalise > Voice Command

Z Q

> Voice Dial

Z Q

to add a new Voice Dial entry to the list

Z Q

Browse through the Phonebook to select an entry which is to be

attributed with a voice command, twice

Z Q

Note: Each recording is short in length, so be prepared to speak soon after

initiating the recording.

When ready, the user should hold the phone approximately 20cm

from his/her mouth, and speak clearly into the

Z Q

microphone to record the name of the selected Phonebook entry

When the recording has stopped, it will be necessary to repeat the name.

When prompted, and repeat the name

Z Q

When recording is completed for a second time, the display will indicate if

the recording was successful or not. If unsuccessful, repeat from step 4.

Download from Www.Somanuals.com. All Manuals Search And Download.

Personalising Your Phone

Recalling Voice Dial Entries

From Idle move and hold the navigation key ( ) in any one of the four

directions , , or . Speak clearly the name you wish to recall (exactly

a b c

as recorded) and wait.

The above procedure will recall the phone number and the recorded Voice

Dial entry is repeated; to initiate the call

Z D

Dialling Voice Dial Entries

Using Permission

From Idle

, select Personalise > Voice Command >

Z Q

Permission

Z Q

With this function enabled a recalled phone number is automatically dialled

without further intervention.

Repeat this process to disable the Permission function returning to Voice

Dial recall only.

Editing the Voice Dial Entries

It is possible to add to, play or delete any of the Voice Dial entries. With a

Voice Dial entry displayed:

and use to select Add, Play or Delete to

Z Q

select the desired option

Add

To add a new Voice Dial entry.

Play

To listen to the recording of a Voice Dial entry.

Delete

To delete an entry.

Download from Www.Somanuals.com. All Manuals Search And Download.

Personalising Your Phone

Changing the Language

It is possible to change the language that the phone uses for either display

messages and/or text entry.

From Idle

, select Personalise > Language

Z Q

Use to select Display Language or Tegic Language (text

entry) that you wish to change

Z Q

Use to select the desired language

Z Q

Restoring the Default Phone Settings

Any personal settings can be returned to their factory default, with the

exception of some features, such as the Phone Lock code and the

Language.

From Idle

, select Personalise > Defaults

Z Q Z Q

to restore the default settings

Z Q

Download from Www.Somanuals.com. All Manuals Search And Download.

Phone Security

The phone features a number of security functions that protect against

unauthorized use, and enable the user to restrict access to certain features -

see “Using the PIN” page 10. It is recommended that all security codes are

memorized. If it is necessary to make a note of any security codes, never

write them in a way that they can be recognized by another person. If

forgotten, contact the dealer for the Phone Lock Code or the Service

Provider for PIN and PIN2.

Using Key Guard

Guard

Keypad?

The Key Guard function is used to prevent any keys

from being accidentally pressed e.g. when the phone

is being carried.

From Idle

, select Key Guard

Z Q

+ Hold

twice to enable Key Guard or

select Key Guard,

twice.

Z Q

When a call is received Key Guard will be disabled

temporarily, allowing the user to press any key

except

to answer the call. Emergency calls can

still be made - see “Emergency Calls” page 9.

Note: When making emergency calls with the “Key Guard” enabled, there

will be no audible or visual indication that the number is being dialled

Disabling Key Guard

Z Q

When Free Keypad: is displayed, use to select Yes

Z Q

Changing the Security Codes

From Idle

, select

> Security

Phone Menu Z Q

Z Q

Use to select Phone Lock, PIN or PIN2

Z Q

Use to select Change

Z Q

Enter the current code

Enter the new code

Verify the new code

Download from Www.Somanuals.com. All Manuals Search And Download.

Phone Security

Restricting Calls

Call Barring

The Call Bar function is used to restrict certain outgoing and/or incoming

calls. Call Bar is controlled by a security password that is supplied by the

Service Provider. When updating or checking the status of Call Bar the

phone must be registered with a network. Different Call Bar restrictions

can be used for voice, fax and data calls. Any combination of call restrictions

can be set.

From Idle

, select Phone Menu > Security > Call

Z Q

Bar

Z Q

Use , select Bar Voice, Bar Fax or Bar Data

Z Q

twice

Use to select the level of call barring that needs to be applied

and

Z Q

Enter Call Bar password and

Z Q

Barred Dialling

The Barred Dial function enables the user to bar all phone numbers

pre-programmed in the SIM from being dialled on the phone. To use this

function PIN2 is required.

From Idle

, select Phone Menu > Security > Barred

Z Q

Dial

Z Q

Enter PIN2

Z Q

Fixed Dial

The Fixed Dial Store is part of Phonebook, but with additional security.

When the security feature Fixed Dial is enabled it is only possible to make

calls with phone numbers that are in the Fixed Dial Store.

When Fixed Dial is enabled any manually dialled phone numbers must

match a phone number in the Fixed Dial Store.

To store, edit or delete a phone number in the Fixed Dial Store the Fixed

Dial function must be enabled. With Fixed Dial enabled, all phone numbers

can be added, edited or deleted as normal, but you will be prompted for

PIN2.

Download from Www.Somanuals.com. All Manuals Search And Download.

Phone Security

“Wild” Numbers

Wild numbers are spaces that can be stored in a phone number. The “wild”

numbers must be filled before the phone number is dialled. Used in

conjunction with Fixed Dial calls can be restricted, for example, to a specific

area by storing the area code of a phone and when recalled the remainder

can be added. The “wild” numbers can be anywhere within a stored phone

number.

+ Hold

until

is displayed to enter a wild number

When the phone number is recalled pressing a numeric key will fill

in a “wild” number

Download from Www.Somanuals.com. All Manuals Search And Download.

Applications

Clock

This phone incorporates a clock with date/time, an alarm and a power

on/off feature.

A second clock for dual time is also included - see “Second Clock” page 54.

Initially Setting the Home Time

From Idle

, select Applications

Z Q

Time:

H:MM

> Clock Function > Clock Set >

Home > Time Set

Z Q

Enter the digits for the date in the format

day/month/year

Z Q

Enter the digits for the time using 24 hour

clock

0-9

Z Q

From Idle

, select Applications >

Z Q

Clock Function > Clock Set > Home >

Summer Time

to enable or disable Summer

Z Q

Time

Setting the Clock Format

From Idle

, select Applications > Clock Function

Z Q

> Clock Format > Display Format

Z Q

Use to cycle through the different clock and/or date formats

to select the desired clock display type

Z Q

Altering the Time/Date

From Idle

, select Applications > Clock Function >

Z Q

Clock Set > Home > Time Set

Z Q

to remove the current date

+ Hold

Enter the digits in the format day/month/year

to accept the date

Z Q

+ Hold

to remove the current time

Enter the digits using 24 hour clock

Z Q

Download from Www.Somanuals.com. All Manuals Search And Download.

Applications

Setting the Clock for Summer Time

From Idle

Clock Set > Home > Summer Time

, select Applications > Clock Function >

Z Q

to set Summer Time On or Off

Z Q

Setting the Alarm

1. --:--

2. --:--

3. --:--

4. --:--

If the clock hasn’t been set, the user will be

prompted to do so prior to setting the alarm.

There are four separate alarms, each of which may

be set independently.

Set

From Idle

> Clock Function > Alarm Set

, select Applications

Z Q

Use to select the alarm to be set

Z Q

Enter the digits for the time

Z Q

Use to select the frequency of the alarm

Z Q

Use to select the ring type

Z Q

will be displayed when the phone is in

When the alarm has been set,

Idle.

The alarm is activated in accordance with the current clock (Home or

Second).

Muting the Alarm

When the set time is reached the alarm will sound and the display will flash

with an alarm message. The alarm will sound for 30 seconds. If the alarm is

due during a call, it will activate vibration alert.

To end the alarm:

any key

Disabling the Alarm

From Idle

, select Applications > Clock Function >

Z Q

Alarm Set

Z Q

Use to select the alarm to be disabled

twice

Z Q

Use to select Disabled

Z Q

When disabled, following the same procedure will re-enable the alarm.

Download from Www.Somanuals.com. All Manuals Search And Download.

Applications

Adjusting the Alarm Time

From Idle

, select Applications > Clock Function >

Z Q

Alarm Set

Z Q

Use to select the alarm to be adjusted

Z Q

to remove the current alarm time

+ Hold

Enter the digits for the time

Z Q

Use to select the frequency of the alarm

Z Q

Use to select the ring type

Z Q

Setting a Power On/Off Time

The phone can be set to turn itself on or off automatically at a specified

time using the Power On/Off feature. The procedure for setting/adjusting

the Power On/Off automatically is similar to that for setting the time on the

clock. For either setting or adjusting the time needed to select Power On

Time or Power Off Time in the Clock Function menu.

Caution: Ensure that the setting of the Alarm or Power On function will

not contravene any regulations whereby it may automatically power on

when in an aircraft or medical facility etc. - see “Important Information”

page i.

Calculator

The four function calculator will enable the user to perform simple

arithmetic calculations (addition/subtraction/multiplication and division).

From Idle

, select Applications > Calculator

Z Q

Enter a number (maximum 10 digits) and it will be displayed on the

upper right of the display. If a decimal point is required,

Hold

Use

to multiply,

to select the arithmetic operation you wish to perform (

to add, to divide,

to subtract)

Enter a number (maximum 10 digits) and it will be displayed next to

the operation symbol

is used to select another arithmetical operation to perform, an

intermediate calculation will be performed and the result displayed on the

middle line.

to complete the calculation when = is displayed in the

Z Q

centre of the operation field

Download from Www.Somanuals.com. All Manuals Search And Download.

Applications

Currency Convertor

The currency convertor enables the user to convert from/to a home

currency using a conversion rate that you enter.

From Idle

, select Applications > Currency

Z Q

Entering an Initial Conversion Rate

Z Q

Enter an abbreviation for the home currency (up to 3 characters)

twice

Z Q

Enter an abbreviation for the foreign currency (up to 3 characters)

twice

Z Q

Enter the currency conversion rate

twice

Z Q

Converting a Value

Check the conversion rate is the one you require

twice

Z Q

Enter the value to be converted

twice

Z Q

The conversion rate will be retained in the phone once entered. The next

time the convertor is used, the conversion rate / currency abbreviation can

be edited while in the Currency /rate display.

, then use to

Z Q

select

Edit

Z Q

Swapping the Currency Conversion

When you have accepted the conversion rate and are ready to enter the

value to be converted, you can swap the currencies to convert from the

foreign currency into the home currency.

Use to select

Swap

Enter the value for conversion

Z Q

twice

Z Q

Download from Www.Somanuals.com. All Manuals Search And Download.

Text Messages

It is possible to receive, display, edit and/or send text messages of up to 459

characters, (Dependant on the language being used) to mobile phones on

the same network or any network that has a roaming agreement. Messages

will be sent as one message, but will be received as (up to) three messages.

(Dependant on the recipients phone parameters).

Setting the Phone for Short Text Messages

Before a message can be sent, it is necessary to enter the Message Centre

number into Parameters (the Service Provider will supply the Message

Centre number).

The Message Centre number may have been preprogrammed on the SIM.

Setting the Message Centre Number

From Idle

Message Centre

, select Messages > Parameters >

Z Q

Enter message centre number in international dial format – see

“International Dialling” page 8 .

Creating a Text Message

Hello

From Idle

, select Messages >

Z Q

Create

Z Q

Create a text message (up to 459 characters) -

see “Text Entry” page 56

+ Hold

Z B

to enter character menu.

1 0

to exit the character menu

Use

to navigate through the message and add or delete text

twice

Z Q

The user may be prompted to send the message, if the message is not to

be sent

, the message will be stored.

and enter the destination phone number (or recall a

Z Q

number from the Phonebook) - see “Retrieve a Number” page 14

twice

Z Q

Download from Www.Somanuals.com. All Manuals Search And Download.

Text Messages

The user may be asked if delivery confirmation is required. If not

required use to select No

. If yes, use to select Yes

Z Q

The default setting for delivery confirmation can be enabled/disabled using

the Report parameter in the Parameters menu.

Receiving Text Messages

When a Short Text Message is sent to the phone the message indicator

(

) will flash in the display, with an audible tone or vibration. This indicates

that a new message has been received.

When Read is displayed

navigate through the message and to identify the sender and the time

the message was sent.

to read the message. Use

Z Q

Note: If the message indicator is displayed constantly (does not flash) this

indicates that the message area is full and you will need to delete old

messages in order to be able to receive new messages in the future.

Message Options

Reply to a Message

When a message is received and read the option to reply to the sender may

be selected.

twice. This will allow the user to create a reply message

Z Q

Delete a Message

Z Q

Use to select Delete

to delete the message

Z Q

To enable the auto-deletion of messages - see “Parameters” page 35.

Edit a Message

Z Q

Use to select Edit

to edit the message

Z Q

, this will give the option to send the edited message - see

Z B

the message and it will be stored in the Send List.

Z Q

“Creating a Text Message” page 32.

if it is not necessary to send

Download from Www.Somanuals.com. All Manuals Search And Download.

Text Messages

Cut / Copy & Paste Message Text

This function allows the user to cut or copy message text from a user

defined message or a user created message, into a new or existing message.

It can also be used to paste text to a previously sent message - See “Edit a

Message” page 33.

When message text is displayed,

, select Cut or Copy

Z Q

Use

or copied

Use

to position the cursor at the beginning of the text to be cut

Z Q

to highlight the required text

Z Q

The cut or copied text will remain in the phone memory until other text is

cut or copied.

Select the required text screen for cut or copied text to be pasted

into

Z Q

Select Paste

Z Q

To cut or copy text from a received message, select Forw’d and repeat

steps 1 - 3.

Manage Messages Lists

All messages, whether sent or received, will be stored on the SIM until they

are deleted. Selecting a stored message allows it to be replied to, edited or

deleted.

Receive List

Messages received will be stored in the Receive List. A

list, indicates an unread message.

in the receive

When reading a message the sender’s information is displayed below the

text. Press to show the sender’s ID (if available), the time the message

was sent and the message centre number.

to reply to the message.

twice allows the user

Z Q

Send List

When a message has been sent or edited it will be stored in the Send List.

Create

This allows the user to create a new message or reply to a received

message.

Download from Www.Somanuals.com. All Manuals Search And Download.

Text Messages

Chat SMS

Chat, will enable the user to read sent and received messages on one

screen when in Chat SMS mode.

Review

Review allows you to check usage of the message area.

Parameters

From Idle

, select Messages > Parameters

Z Q

The following parameters can be set:

Recipient Group

Recipient Group enables the user to pre-define the destination of text

messages.

Auto Delete

When set will erase messages automatically:

Received Read - will overwrite the oldest read message.

Received Any - will overwrite the oldest message, even though it may

not have been read.

Lifetime

This is the duration that your message is stored at the Message Centre.

Delivery attempts will be repeated until the message has been delivered or

the Lifetime expires.

Message Centre

Allows the Message Centre phone number to be edited - see “Setting the

Phone for Short Text Messages” page 32.

Report

When your message has been delivered a confirmation will be received if

Report is set to Yes.

Protocol

The Message Centre may be able to convert the message to the format

specified by the selected protocol.

Download from Www.Somanuals.com. All Manuals Search And Download.

Text Messages

Broadcast

You need to specify the topic(s) of information that you wish to receive as

broadcasts before you can receive them.

From Idle

, select Messages > Broadcasts >

Z Q

Topics

Z Q

twice to insert a new topic

Z Q

Use to cycle through the available topics

to insert the currently displayed topic into your broadcast

Z Q

list

Enabling/Disabling Broadcasts

From Idle

, select Messages > Broadcasts

Z Q

Select Receive

Z Q

When enabled, following the same procedure will disable broadcasts.

Message List

This is a store for the last received broadcast messages. Messages can be

deleted from here.

Language

The language in which broadcast messages are displayed can be changed

(

Download from Www.Somanuals.com. All Manuals Search And Download.

Call Information

Recent Numbers

Recently dialled phone numbers will be stored in Last Dialled.

If Caller Identification is available the caller’s phone number, for an

answered call will be stored in the Answered menu and an unanswered

call will be stored in the Unanswered menu.

If Caller Identification is not available then calls will still be stored but will

have the date and time attributed to them.

When the store is full the next phone number will overwrite the oldest.

From Idle

Z D

Use to select Last Dialled, Answered or Unanswered

Z Q

Use to select the phone number (or name) you wish to redial

Z D

You can edit or delete the phone number before dialling – see “Editing

Phonebook Entries” page 14.

If you wish to store the selected number in Phonebook,

while

Z A

the number is displayed – see “Store a Number” page 13.

Calling the Last Dialled Number

To redial your last called phone number

twice.

Z D

Returning an Unanswered Call

When the display shows that you have received calls but not answered

them.

Z Q

The last caller’s phone number will be displayed if it is available.

Use to select the phone number you wish to dial

Z D

Download from Www.Somanuals.com. All Manuals Search And Download.

Call Information

Call Duration

From Idle

, select Phone Menu > Call Service >

Z Q

Calls

Z Q

Note: The Calls function is SIM dependent (Q). If the SIM does not

support this function then items under Calls menu will be found directly

under Call Service menu.

Use to select one of the functions described below, and

The Last Call function will display the duration and call charge if available, of

the last call during Idle mode, or the current call during a call. Times are

indicated as: hours (0-99), minutes (0-59), seconds (0-59) - HH:MM:SS.

The All Calls function displays the accumulated duration and call charge, if

available, of Incoming and Outgoing calls. The lock code or PIN2 is required

to reset the timer and call charge.

Call Charges

To maintain control over the cost of calls that are made, the phone can be

set to restrict use to a finite number of units overall. (Q)

Setting the Unit Price

Firstly, a price per unit must be entered. This is the cost that the Service

Provider charges for one unit of call time. (Q)

From Idle

, select Phone Menu > Call Service >

Z Q

Service Charges > Price/Unit

Z Q

to edit the values

Z Q

At this point you will be asked to enter your PIN2 or Lock code

Z Q

Enter a currency unit (up to three characters) e.g. GBP

twice

Enter a price

twice

Z Q

Download from Www.Somanuals.com. All Manuals Search And Download.

Call Information

Setting the Maximum Unit Level

This function allows the user to pre - determine the maximum cost of calls

made. (Q)

From Idle

, select Phone Menu > Call Service >

Z Q

Service Charges > Max Cost

Z Q

twice to edit the values

Z Q

At this point you will be asked to enter your PIN2 or lock code

Z Q

Enter a value (number of units) which is to be the maximum

permitted, and the corresponding cost will be displayed

twice to accept

Z Q

Note: The duration of one unit may vary during the day, peak and off-peak

times. Therefore, the call charge can be calculated accordingly. However,

call charge information may not give an accurate reflection of the tariffs

charged by your Service Provider.

Setting a Warning Level

A warning can be set as an indication that the maximum cost is about to be

reached. This function is SIM dependent.

From Idle

, select Phone Menu > Call Service >

Z Q

Service Charges > Warning at

Z Q

twice to edit the value

Z Q

Enter a value (in units) at which time you would like the warning to

sound twice

Z Q

Call Identification

In the Call Service menu, the Caller’s ID and Withhold ID functions allow

you to check the status of whether a Caller’s Identification is sent or can be

received. (Withhold ID

)

Note: When checking the status the phone must be registered with a

network.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced Operation

Diverting Calls

Voice, fax and data calls can be diverted using different circumstances and

to different numbers. For example you may wish voice calls to be diverted

to Voicemail in the event that the phone is switched off.

From Idle

select Phone Menu > Call Divert

Z Q Z

Use to select the type of calls to divert,

twice

Z Q

Use to select the circumstances to initiate the divert

Z Q

Enter phone number to divert to

twice

Z Q

When a divert situation is enabled the divert icon ( ) is displayed.

When updating or checking the status of Call Divert the phone must be

registered with a network. (Q)

Holding Calls and Call Waiting

Holding a Call

During a call:

Z Q

Use to select Hold

Z Q

Resuming a Call

Z Q

Use to select Resume

Z Q

Making a Second Call

Enter phone number (or recall from Phonebook – see “Retrieve a

Number” page 14)

Z D

The first call will be placed on hold.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced Operation

Receiving a Second Call

A second call can be received, if Call Waiting is switched on. This is enabled

from the Phone Menu > Call Service menu. It is not possible to have

more than one fax or data call. All voice calls must be ended before you can

make or receive a fax or data call. (Q)

Accept a Second Call

Z Q

Use to select

Z Q

The current call will be placed on hold.

Reject a Second Call

Z Q

Use to select

Reject

Z Q

End Current Call and Receive Second Call

with a waiting call

Z E

any key except

Operation During Two Calls

Swapping Between Calls

The

prompt in the display screen, indicates the current call

Z Q

Use select

Swap

Z Q

End Current Call

Z Q

Use to select

End

Z Q

The held call will remain held.

End Both Calls

Z E

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced Operation

Call Transfer

With two calls connected, Call Transfer enables the user to connect them

together ending your connection, leaving the other parties to talk together.

(Q)

When two calls are in use:

Z Q

Use to select

Trans.

Z Q

The two calls will be connected to each other and your call will be ended.

Note: Two call transfer cannot be utilized while in Multi-party mode.

Multi-party Calls

A Multi-party call enables three to five people to be in conversation at the

same time. It is possible to swap between a Multi-party call and another call

in the same way as with two separate calls. (Q)

Enabling Multi-party

With two calls connected (one active, one on hold):

Z Q

Use to select

Merge

Z Q

A Multi-party call has been enabled, all three people will be able to talk to

each other.

Adding to Multi-party

It is possible to add to the Multi-party call (up to a maximum of five). Either

by making a call or accepting an incoming call. The call can then be merged

into the Multi-party.

Note: When making a call or accepting an incoming call the Multi-party call

will be placed on hold. The callers in the Multi-party call can continue to

communicate with each other while on hold.

Splitting a Multi-party

The user can select an individual from the Multi-party and remove their

connection. This enables you to talk privately without the participation of

the rest of the Multi-party.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced Operation

During a Multi-party call:

Z Q

Use to select

Option

Z Q

Use to select a caller in the Multi-party

Z Q

Use to select

Split

Z Q

The selected caller will be split from the Multi-party call and the Multi-party

call will be placed on hold (the remaining Multi-party call callers can still

communicate).

Ending Multi-party Calls

The user can either select an individual in the Multi-party and end the call or

end the entire Multi-party call. If a call is held, or an other call is incoming

then an individual call cannot be ended.

Ending a Single Connection

During a Multi-party call

Z Q

Use to select

Option

Z Q

Use to select a caller in the Multi-party

Z Q

Use to select

End

Z Q

Ending a Multi-party Call

During a Multi-party call:

to end all the calls at once

Z E

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced Operation

Changing to a New Network

When not in your home Country / Region, the user may use a network that

is not directly subscribed to, this is called ROAMING. National Law may not

permit roaming in your home region.

The New Network function is used to manually select a network that is

available in your current location.

From Idle

Network

, select Phone Menu > Network > New

Z Q

Use to select one from the list of available networks

Z Q

An X will be displayed in the information area if you cannot register with

the selected network.

When the Search Mode is set to Automatic the phone will automatically

reselect a new network in order to maintain optimum network availability.

With the Search Mode set to Manual the phone will only use a selected

network. If coverage is lost another network should be selected.

The Network List is used when the Search Mode has been set to

Automatic. The location numbers in the Preferred Network List show the

search priority.

Selecting Insert stores a new network in the currently displayed location

and then moves other networks down, Edit overwrites the old network

with a new one, and Add stores a new network at the end of the list.

Download from Www.Somanuals.com. All Manuals Search And Download.

Schedule

The Scheduler can be used to register reminders for personal events as well

as planning holiday periods.

Caution: Ensure that any settings made in the Scheduler will not

contravene any regulations whereby the phone may automatically power

on when in an aircraft or medical facility etc. - see “Important Information”

page i.

Creating a Reminder

From Idle

, select Schedule

Z Q

Use the Navigation key ( ) to select the date for your reminder

twice to create a new entry when the required date is

Z Q

highlighted

Enter the digits for the time using 24 hour clock

twice

Z Q

Use to select the frequency of the reminder

Z Q

When selecting Daily, Weekly or Yearly you will be given the option of

using the “Repeat Count”, which allows you to set the frequency of the

alarm.

Enter the memo for the reminder – see “Text Entry” page 56,

twice

Z Q

Use to select a ring type for the reminder

Z Q

To indicate that a reminder has been set, the date will appear as a white

number on a dark background.

Viewing Reminders

When in the Schedule menu, select the required date using the

Navigation key (

)

to view reminders for that date

g Z A

Deleting Reminders

From Idle

, select Schedule

Z Q

to select the required date of the reminder

Use

Z A

Z Q

Use to select the reminder to be deleted

Use to select Delete

twice

Z Q

Download from Www.Somanuals.com. All Manuals Search And Download.

Schedule

Setting a Holiday Reminder

From Idle

, select Schedule

Z Q Z Q

Use the Navigation key ( ) to select the day of your holiday

Use to select Function

Z Q

Use to select Holiday Set

Use to select Day, Day of the week

three times to

Z Q

update the Holiday List

Repeat process for each day of holiday as required.

Deleting Holiday Reminders

To delete holiday reminders:

From Idle

, select Schedule

Z Q

Use the Navigation key ( ) to select the day of your holiday to be

deleted

Z Q

Use to select Function

Z Q

Use to select Holiday Set

Z Q

Use to select Holiday List,

to select date for deletion

twice

Z Q

To delete ALL Holiday Reminders select All Clear

twice.

Z Q

Note: To indicate that a holiday reminder has been set, the date/s will be

encapsulated in a clear box.

Jump to Future Date

From Idle

, select Schedule

Z Q Z Q

Z Q

Use to select Jump

Z Q

to remove the current date

+ Hold

Using

enter the date (using chosen date format) to

which you want to ‘jump’ to

twice

Z Q

Download from Www.Somanuals.com. All Manuals Search And Download.

Games

Racing Game

The object of the game is to control a racing car around a circuit avoiding

other cars in the fastest time possible & avoiding obstacles on the track i.e.

Oil spillages.

Each time a new game is started, the player is credited with three “lives”.

Play the Game

From Idle

twice

select Games >Racing Game

Z Q

Use to select a skill level

to enter the game screen

Z Q

Approximately three seconds after entering the game screen, the timer will

begin.

Use to change the gears enabling the car to accelerate and slow

down/stop. ( to accelerate or

to slow down or stop)

There is a gear change indicator on the right hand side of the display,

showing current gear position.

Use

to change lateral direction of the car during the race

Ball Game

The object of the game is to control a character between elevating

platforms and achieve a high score without allowing the character to fall to

the bottom of the screen or to get hit by a fireball.

A life will also be lost if the character is allowed to the top of the screen.

Play the Game

From Idle

select Games > Ball Game

Z Q

Use select GAME START

Z Q

select difficulty level

Z Q

Use

After a short demonstration, the game will begin.

Use to control the character between the platforms

The current score is displayed on the right hand side of the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

WAP Browser

The phone’s WAP (Wireless Application Protocol) Browser enables the

user to access Internet services supported by the network, such as news,

weather reports, sport etc.

Server Settings

Before Internet services can be accessed, the SIM must be data enabled and

the relevant configuration information, entered into the phone.

These settings may have been pre-programmed by the network operator.

Note: Modifying previously entered settings can cause failure of the

Browser.

From Idle

, select Browser > Browser Setting >

Z Q

Server Setting

Z Q

Two servers may be setup on the phone. Use to select one or

other of the server settings

Z Q

Use to select Edit

A list of configuration parameters will be displayed. The parameter Name

will be highlighted and will be displayed.

Edit

Z Q

Enter the name of the WAP server

twice

Z Q

Use to select each of the other parameters in turn, edit the

information

twice

Z Q

After all parameters have been entered,

the previous menu level

Select the server setting that you have just edited

to return to

Z B

. Use

Z Q

to select Set

Z Q

Record your WAP settings in the table at the rear of this booklet for

easy reference.

Download from Www.Somanuals.com. All Manuals Search And Download.

WAP Browser

Activating the Browser

To activate the Browser:

From Idle

, select Browser > Start Browser

Z Q

The first time that the browser is activated there will be no content stored

so the Home URL content will be displayed (as defined by the network

operator). The Home URL will be recalled from the cash, each time the

browser is activated. (Cache is the phone’s memory that stores content

downloaded in the past). When recalling content from cache the phone

remains off-line (not connected to a WAP server).

Navigating Content

Use the Navigation key ( ) to scroll through the content on the screen as

follows:

Use to scroll up/down on the current page

Use to return to the previous page

Use to return to the next page (only applicable if returned to

previous page)

When linked text (underlined text) is highlighted

represented by the link.

to load the page

to view contents

Z Q

indicates a table - with View displayed

(

Z Q

of table

Indicates an image which cannot be displayed

Indicates on-line browsing (Non Secure)

Indicates on-line browsing (Secure)

)

The Browser Menu

The Browser also contains its own menu which is applicable when content

is currently being displayed (either on-line or off-line).

To access the Browser menu

bottom.

when

is displayed at the

Z A

This menu is used as follows:

Home Deck

Displays the Home URL content as defined by the network operator.

Download from Www.Somanuals.com. All Manuals Search And Download.

WAP Browser

Bookmark

Use, add, delete and rename bookmarks.

Enter URL

Type in a URL directly to go to a known site .

Reload

Will reload and update the current page.

Reset

Deletes the content in cache and displays the Home URL content.

Exit

Deactivates the Browser.

Using Bookmarks

Frequently accessed pages may be bookmarked to save time. This prevents

the need to re-enter the URL each time.

Adding a Bookmark

While viewing content

Z A

Use to select Bookmark

twice to register the bookmark

Z Q

Recalling Pages Using Bookmarks

With content displayed

Z A

Use to select Bookmark

Z Q

Use to select the relevant bookmark from the list,

Z Q

Renaming a Bookmark

With content displayed

Z A

Use to select Bookmark

Z Q

Use to select the relevant bookmark from the list,

Z A

Z Q

+ Hold

the name required

to remove the bookmark name, then re-type

twice

Z Q

Download from Www.Somanuals.com. All Manuals Search And Download.

WAP Browser

Deleting Bookmarks

With content displayed

Z A

Use to select Bookmark

Z Q

Use to select the relevant bookmark from the list,

Z A

Use to select Delete

twice

Z Q

Deactivating the Browser

The Browser can be deactivated as follows:

When browsing on-line

When browsing off-line

to review cache off line.

to return to Idle mode.

Z E

Setting the Linger Time

The phone will be automatically disconnected from the WAP server after a

set period of non-interaction. This period is defined in seconds by the

Linger Time setting.

From Idle

, select Browser > Browser Setting >

Z Q

Linger Time

Z Q

to remove the current linger time, then

+ Hold

re-enter the value required

twice

Z Q

Last Error

If an error should occur when using the Browser, use this function to

inform the network operator of the last error which occurred with the

phone, to assist with a diagnosis of the problem.

From Idle

, select Browser > Browser Setting > Last

Z Q

Error

Z Q

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional Features

Desktop Handsfree

Desktop Handsfree enables you to hold a conversation without having to

hold the phone to your ear.

Note: Do NOT hold the phone to your ear in Handsfree mode.

Swapping Between Handsfree and Handheld Calls

During a Handheld call:

Z Q

Use to select H’free

Z Q

During a Handsfree call:

twice to revert for Handheld operation

Z Q

Answering a Call Handsfree:

To answer a call using Handsfree

+ Hold

Voice Memo

You can record a two-way conversation during a call. If a different SIM is

installed any voice memos will be lost.

Caution: Security of a recorded message is your responsibility. You MUST

ask for the other party’s consent before recording.

Record a Voice Memo

Z Q

Use to select Memo

Z Q

A tone will sound when recording starts. When the recording stops a tone

will sound.

If you

while recording a voice memo, recording will stop but no

Z Q

tone will sound to either party.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional Features

Play Back a Voice Memo

From Idle

> Playback

, select Applications > Voice Memo Play

Z Q

To stop playing,

twice

Z Q

The Note Pad function is available during playback - see “Note Pad” page

54.

Volume Control During Playback

While playing back:

Use to adjust the volume of the voice memo

Delete Memo

From Idle

> Delete

, select Applications > Voice Memo Play

twice

Z Q

DTMF Tones

DTMF tones can be sent during conversation. These are often used to

access voice mail, paging and computerized home banking. For example,

you may need to input a number to remotely access voice mail messages. A

phone number may be stored in the Phonebook with DTMF tones, allowing

the number to be dialled upon recall and the DTMF number to be sent

automatically.

Send DTMF Tones During a Call

Enter digits (

and

)

9 #

Pause Dial

Using pauses allows you to send DTMF tones automatically.

Enter phone number

Press and hold until a P is displayed at the end of the phone

number entered

Enter DTMF digits after the pause, e.g. enter the number to access

voice mail messages.

Z D

When the call is successful DTMF tones will be sent after 3 seconds or

to send the DTMF tones manually.

Z D

If the DTMF tones are unsuccessful then the destination of your call may

require that the length of the tones be increased.

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional Features

, select Personalise > DTMF Length

From Idle

Z Q

Use to select Long

Z Q

Note Pad

During a call numbers can be entered which you may wish to dial when the

call has ended.

During a call:

Enter phone number

When the call has ended

to call that number

Z D

while the number is displayed – see

To store in Phonebook,

“Store a Number” page 13.

Second Clock

The Second Clock can either be set to auto-adjusting, whereby the second

time will be automatically set from the code of the current network, or a

specified time difference can be set manually.

Setting Clock Display

From Idle

, select

> Clock Function

Applications

Z Q

> Clock Format > Display Pattern

Z Q

Use to select Second Time or Home Time

Z Q

Setting Auto Adjustment

If travelling to a country / region which has a roaming agreement with the

users’ home network, the Second Clock will be automatically adjusted.

However, for countries / regions which have several time zones in the same

area manual adjustment is required.

From Idle

, select Applications > Clock Function

Z Q

> Clock Set > Second > Auto Adjustment > Home area

Z Q

Use to select your home area

Z Q

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional Features

Enabling Auto Adjustment

From Idle

, select Applications > Clock Function >

Z Q

Clock Set > Second > Auto Adjustment > Auto

Adjustment

Z Q

Repeat to disable Auto Adjustment.

Setting Manual Adjustment

From Idle

, select Applications > Clock Function

Z Q

> Clock Set > Second > Time Difference

Z Q

to set the

Z Q

Use to select the time difference required

value

Setting Summer Time

From Idle

, select Applications > Clock Function >

Z Q

Clock Set > Second > Summer Time

Z Q

Once enabled, following the same procedure will disable Summer Time.

Accessory Related Features

When Auto Answer is switched on, and Personal Handsfree is connected, a

call will be answered without pressing any keys. Any call waiting should be

answered in the normal way.

This is also applicable to the Handsfree Car Kit accessory.

See the documentation provided with the relevant Accessory for

operation details.

Download from Www.Somanuals.com. All Manuals Search And Download.

Text Entry

The phone provides a means for entering alphanumeric characters to enter

details into the Phonebook, to create text and e-mail messages etc. This

section details the characters that can be entered and the relevant keys to

press.

Text Mode

Key

T9^®

Normal

(ABC)

Greek

(ÁÂÃ)

Extended

(AÄÅ)

Numeric

(0 - 9)

Alternatives

Punctuation

abc

0+P_

.@/:;*#+-”,!¡?¿_()[]{}’&%\^~|<>=_£$¥¤§

ABCabc

ABÃ

ÄÅÆ

ÇÈÉ

ÊËÌ

ÍÎÏ

ÐÑÓ

ÔÕÖ

×ØÙ

AÄÅÆBCÇaäåæàbc

DEÉFdeéèf

GHIghiì

def

DEFdef

ghi

GHIghi

jkl

JKLjkl

mno

MNOmno

MNÑOÖØmnñoöøò

PQRSpqrsß

TUÜVtuüùv

WXYZwxyz

pqrs

PQRSpqrs

TUVtuv

tuv

wxyz

WXYZwxyz

Shift/Lock^*

Space

Shift/Lock^*

Space

once to enter a single capital letter (subsequent characters

Z *

will be lower case).

twice acts as a keyboard CAPS LOCK

Z *

function and subsequent characters will be uppercase.

time, to return to lowercase character entry.

a third

Z *

Alternatively,

+ Hold any of the numeric keys to enter the character

menu, which allows the user to navigate around the menu ( ) until the

required character is highlighted.

to select.

Z Q

to return to the message screen.

Z C

Download from Www.Somanuals.com. All Manuals Search And Download.

Text Entry

T9^®Text Input

Using this mode of text entry dramatically reduces the number of key

presses required:

Press a key once for any letter you require on that key. The desired letter

may not be displayed. Continue pressing other keys until the end of a word

is reached; then check that the word has been typed correctly before

continuing on to the next word.

If the combination of letters typed has produced a word which is not the

one you require, press

repeatedly until the correct word is displayed.

Continue to the next word.

If the word you require is not in the internal dictionary (i.e. It is a proper

noun or a rarely used word) then it should be entered using the Normal

(

) mode.

Other Text Modes

To access any of the other text entry modes use

to cycle through until

the desired mode is displayed in the Information Area.

When using Normal (

), Greek (

) or Extended (

) text entry

modes, each time a key is pressed in quick succession it will display the next

character available on that key (or if the key is pressed and held down it will

cycle through the available characters). Releasing the key, or pressing

another key will enter the currently displayed character and the cursor will

move to the next position.

Editing Text

Pressing will move you up or down one text line (or field in Phonebook).

Pressing

will move you left or right one character. When the cursor is

moved over a character and another key pressed this will insert the new

character immediately before the selected character. Pressing will

delete the character to the left of the cursor or delete the current line

when pressed and held.

T9^®is a trademark of Tegic Communications Inc.T9^®Text Input is licensed under one

or more of the following: U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928,

and 6,011,554; Canadian Pat. No. 1,331,057; United Kingdom Pat. No. 2238414B;

Hong Kong Standard Pat. No.HK0940329; Republic of Singapore Pat. No. 51383;

Euro.Pat. No. 0 842 463 (96927260.8) DE/DK, FI, FR, IT, NL, PT.ES, SE, GB; and

additional patents are pending worldwide.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Structure

to display a menu of phone features. To select a

From Idle

Z Q

feature, use to navigate to the icon of the feature you require.

when the icon is highlighted.

Z Q

To exit the current menu and return to the previous level

. To

Z B

+Hold , or

exit completely out of the menu structure,

(except during a call).

During a call a restricted menu will be available.

1 Personalise

2 Games

^*All calls

^*Call Waiting¹

^*Caller's ID

^*Withhold ID

*My number

*Service Charges

Call Divert

Voice Calls

Fax Calls

Language

Tones

Racing Game

Ball Game

All Tones

Ring Volume

Ring Type

3 Phonebook

Browse

Create

Melody Composer

Alert Profile

Group Setting

Review

Voice Ringer

Key Volume

Key Tone Type

Warning Tone

Voice Command

Voice Dial

Data Calls

Cancel All

Status

My Numbers²

Hot Key Dial

Security

4 Key Guard

Phone Lock

Permission

Display Setting

Idle Screen

Greeting

Animation

Contrast

Call Bar¹

5 Browser

PIN²

Start Browser

Browser Setting

Linger Time

Last Error

PIN2²

Fixed Dial²

Barred Dial²

Network

Backlight Time

Vibration Alert

Continuous

Intermittent

Disable

Server Setting

New Network

Search Mode

Network List

6 Messages

Receive List

Send List

Create

8 Applications

Discreet Mode

Ring Volume

Vibration

Games

Chat SMS

Review

Voice Memo Play

Download Data¹

Melody

Continuous

Intermittent

Disable

Parameters

Broadcasts²

Logos

Clock Function

Clock Set

7 Phone Menu

User Msg.

Auto Answer

DTMF Length

Defaults

Call Service

Calls

Clock Format

Alarm Set

^*Last Call

Power On Time

Power Off Time

Calculator

¹Function is Network Dependent (

²Function is SIM Dependent (

R⁾

Currency

M⁾

9 Schedule

* Will move up a level if the SIM does not support Calls function

Download from Www.Somanuals.com. All Manuals Search And Download.

Trouble Shooting

Should any problem persist contact your dealer.

Problem

Cause

Remedy

Phone will not

switch on

Check that the battery is fully

charged and correctly

connected to the phone

Extremely short The network you are

battery life for a

new battery

using and the

condition of the

battery can affect

battery life

Short battery life The battery has worn

Replace with a new fully

charged battery

for an old battery

out

The charging

The battery is not

Leave the phone charging the

battery for a few minutes

before the indicator is lit and

attempting to switch it on

indicator does attached to the phone

not light, the

battery level

indicator does

not appear and

the phone cannot

be switched on

when charging

or when the battery

has been deeply

discharged the phone

will take a short time

until the indicator

lights

The battery is not

attached to the phone

Battery fails to

charge

Ensure the battery is fitted to

the phone prior to

Battery has been

connected to the

phone after AC

adaptor has been

switched on

commencing charging.

Download from Www.Somanuals.com. All Manuals Search And Download.

Trouble Shooting

Unlock the phone

Calls cannot be

made

The phone is

locked

Outgoing calls are Disable the outgoing call barring,

barred

or barred dial

The phone is not

registered to a

network

Move to a coverage area and

operate your phone after it has

registered with a network.

Calls cannot be

made from Fixed

Dial Store

Check your SIM supports Fixed

Dial

Check if the Fixed Dial is

switched on

Check the phone number is

stored in the Fixed Dial

Calls cannot be

received

The phone is not

switched on

Switch the phone on

Incoming calls are Disable the incoming call barring

barred

The phone is not

registered to a

network

Move to a coverage area and

operate your phone after it has

registered with a network.

Emergency calls

cannot be made

You are not in a Check that the antenna symbol

GSM coverage

area

is displayed - move to a coverage

area and operate your phone

when the antenna symbol is

displayed

Phone numbers

cannot be

recalled from

Phonebook

The phone is

locked

Unlock the phone

Phone number has

been restricted

Switch off restriction

Download from Www.Somanuals.com. All Manuals Search And Download.

Trouble Shooting

Important Error Messages

These are some of the most important error messages which may be

displayed:

Area Not

Allowed

Roaming in the selected area is not allowed

Network Not

Allowed

Roaming with the selected network is not allowed

Security Failure

The network has detected an authentication failure

because your SIM is not registered with that network

- contact your Service Provider

SIM Blocked /

Contact Service

provider

The SIM is blocked because one of the PIN/PIN2

unblocking keys (PUK/PUK2) has been entered

incorrectly ten times - contact your Service Provider

SIM Error

The phone has detected a problem with the SIM -

switch the phone off and then back on; if the message

is still displayed contact your Service Provider

SIM Invalid

The SIM has failed one or more of the SIM

personalisation checks - contact your Service Provider

Function

Unavailable

The selected feature is either not supported by the

SIM or is not available with the current subscription -

contact your Service Provider

PIN2 Invalidated The PIN2 is blocked permanently because the wrong

PUK2 has been entered ten times, services controlled

by PIN2 cannot be used - contact your Service

Provider

Message Rejected A message has been received but the message store is

Store Full

full - to receive messages, delete some of the

currently stored messages or set messages to Auto

Delete

Phone Number

Too Long

The edited or newly created Phonebook number is

too long for the SIM

(Max:20)

Warning Store

Full Continue?

The message area is full. Your messages cannot be

stored until some of the currently stored messages

are deleted

Download from Www.Somanuals.com. All Manuals Search And Download.

Trouble Shooting

Verification

Failure

On changing the phone lock code, verification of the

new code is incorrect - retry changing the lock code

with correct verification

Incorrect Lock

Code

Disabling or enabling the lock code has failed due to

incorrect entry of the lock code - re-enter lock code

Incorrect PIN /

PIN2 / PUK /

PUK2

The entered code is incorrect - re-enter code

correctly

Auto Redial List

Full

Redial list of unsuccessfully dialled numbers is full -

switch the phone off and then on again

Download from Www.Somanuals.com. All Manuals Search And Download.

Glossary of Terms

Cut

Copy

Permanently removes selected text from short text

message

Copies selected text from short text message without

removing it from the original message

DTMF Tones

Dual Tone Multi-Frequency tones allow you to

communicate with computerized phone systems,

voice mailboxes etc.

GSM

Global System for Mobile Communications. The name

given to the advanced digital technology that your

phone uses.

Network

Operator

The organization responsible for operating a GSM

network.

Password

Used for the control of the Call Bar. Supplied by your

Service Provider.

Personal Identification Number used for SIM security.

Supplied by your Service Provider. If the PIN is

entered incorrectly 3 times, the PIN will be blocked.

PIN2

Personal Identification Number used for the control of

Fixed Dial Store and Call Charge metering. Supplied

by your Service Provider. If the PIN2 is entered

incorrectly 3 times, the PIN2 will be blocked.

PUK/PUK2

PIN/PIN2 Unblocking Key. Used to unblock the

PIN/PIN2. Supplied by your Service Provider. If the

PUK/PUK2 is entered incorrectly 10 times, the

PUK/PUK2 will be blocked.

Registration

Roaming

The act of locking on to a GSM network. This is

usually performed automatically by your phone.

The ability to use your phone on networks other than

your Home network.

Service

Provider

The organization responsible for providing access to

the GSM network.

Download from Www.Somanuals.com. All Manuals Search And Download.

Glossary of Terms

SIM

Subscriber Identity Module. A small smart-card which

stores unique subscriber and user-entered information

such as Phonebook and Short Messages. Supplied by

your Service Provider.

WAP

Wireless Application Protocol. The communication

standard which enables you to download resources

from the Internet to your phone

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

Phone (Including Battery)^*

GSM900 Class 4

GSM1800 Class 1

Type

Temperature Range

Charging

Storage

+5ºC - +35ºC

-20ºC - +60ºC

Weight

82g^*

Dimensions (mm)

Height x Width x Depth

106 x 46 x 16

Supply Voltage

3.7V DC, 650mAh Li-ion

Standby Time (hrs)

Talk Time (Min)

Up to 150

Up to 360

Charge Time (Phone off)

Up to 90m (Travel Charger)

Up to 120m (Car Charger)

Antenna

SIM Type

Internal

3V only

phonebook Memory

Animation Themes

Voice Memo

User Composed Melody

Downloadable Melody

Recordable Ringer

Games

200 + SIM

2 x 16 seconds

One

Up to 5

2 x 10 seconds

Back light colours

Ring tones

Scheduler

1 (Light Blue)

23 Fixed & Variable

Up to 100 Entries

Alarms

Note: Charge time will be longer when the phone is turned on. Battery life

is affected by the network being used and the condition of the battery.

Download from Www.Somanuals.com. All Manuals Search And Download.

Personal Record

The Serial Number can be found on the outside of the phone under the

battery. For your convenience we recommend that you note the

following details as a record of your purchase.

Part Number

Serial Number

Dealer Name

Purchase Date

WAP Settings

Use the table below to record your WAP settings.

Item

Hint

WAP Server Name

URL of Server

Secure or Unsecured

Phone Number

Analog, Digital or Auto

Name

Current Setting

Name

Home URL

Security

Digital Dial #

Analog Dial #

Circuit Type

PPP ID

PPP Password

Gateway IP

Password

IP Address

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes

Download from Www.Somanuals.com. All Manuals Search And Download.

BULL CP8 PATENT

Information in this document is subject to change without notice. No part of these

instructions may be reproduced or transmitted in any form or by any means without

obtaining express permission from Matsushita Communication Industrial UK Limited

Download from Www.Somanuals.com. All Manuals Search And Download.

GD75DPK12A

Printed in UK

www.panasonicmobile.co.uk

Download from Www.Somanuals.com. All Manuals Search And Download.

Miele Microwave Oven H 4084 BM User Manual
Multiquip Doll HBC19A User Manual
Napoleon Grills Gas Grill 485rsib User Manual
NETGEAR Network Router WNDR3700v2 User Manual
Olevia Flat Panel Television 242T FHD User Manual
Omega Speaker Systems Plumbing Product FPU4500 User Manual
Optoma Technology Home Theater System HD700X User Manual
Oregon Scientific Games Clone Trooper Junior Laptop User Manual
Panasonic Car Stereo System CQ DP151 User Manual
Panasonic Webcam DMC TZ30 User Manual