Owner’s Manual
Blu-ray DiscTM Player
Model No. DMP-BDT330
DMP-BDT230
Unless otherwise indicated, illustrations in this Owner’s Manual are of DMP-BDT330.
Firmware updates
Panasonic is constantly improving the unit’s firmware to ensure
that our customers are enjoying the latest technology.
Panasonic recommends updating your firmware as soon as you
are notified.
For details, refer to “Firmware updates” (> 16) or
Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this manual for future use.
If you have any questions, contact:
U.S.A. and Puerto Rico : 1-800-211-PANA(7262)
Canada : 1-800-561-5505
Register online at www.panasonic.com/register (U.S. customers only)
P
PC
VQT4V26
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
Wireless LAN connection
The following limits are in place regarding the usage of this unit. You
must be aware of these limits before using this unit.
Panasonic will in no way be responsible for any incidental damage
which may arise due to a failure to obey these limits, or to any
condition of use or disuse of this unit.
≥ Data transmitted and received over radio waves may be
intercepted and monitored.
WARNING
Unit
To reduce the risk of fire, electric shock or product damage,
≥ Do not expose this unit to rain, moisture, dripping or splashing.
≥ Do not place objects filled with liquids, such as vases, on this unit.
≥ Use only the recommended accessories.
≥ Do not remove covers.
≥ This unit contains delicate electronic components.
Please use this unit in the manner in which it was intended and
≥ Do not repair this unit by yourself. Refer servicing to qualified
service personnel.
follow the following points:
– Do not expose this unit to high temperatures or direct sunlight.
AC power supply cord
– Do not bend, or subject this unit to strong impacts.
– Keep this unit away from moisture.
– Do not disassemble or alter this unit in any way.
≥ The power plug is the disconnecting device. Install this unit so that
the power plug can be unplugged from the socket outlet
immediately.
Small object
≥ Keep the Memory Card out of reach of children to prevent
Restriction on use of
unauthorized copied content
swallowing.
This unit adopts the following technology for copyright protection.
CAUTION
Cinavia Notice
Unit
This product uses Cinavia technology to limit the use of unauthorized
copies of some commercially-produced film and videos and their
soundtracks. When a prohibited use of an unauthorized copy is
detected, a message will be displayed and playback or copying will be
interrupted.
More information about Cinavia technology is provided at the Cinavia
request additional information about Cinavia by mail, send a postcard
with your mailing address to:
≥ This unit utilizes a laser. Use of controls or adjustments or
performance of procedures other than those specified herein may
result in hazardous radiation exposure.
≥ Do not place sources of naked flames, such as lighted candles, on
this unit.
Placement
To reduce the risk of fire, electric shock or product damage,
≥ Do not install or place this unit in a bookcase, built-in cabinet or in
another confined space. Ensure this unit is well ventilated.
≥ Do not obstruct this unit’s ventilation openings with newspapers,
tablecloths, curtains, and similar items.
Cinavia Consumer Information Center, P.O. Box 86851, San Diego,
CA, 92138, USA.
≥ Do not place the unit on amplifiers/receivers or equipment that
may become hot. The heat can damage the unit.
To dispose or transfer this unit
Batteries
The unit may keep the user settings information in the unit. If you
discard this unit either by disposal or transfer, then follow the
procedure to return all the settings to the factory presets to delete the
user settings. (> 35, “To return all settings to the factory preset.”)
≥ The operation history may be recorded in the memory of this unit.
Mishandling of batteries can cause electrolyte leakage, which can
damage items the fluid contacts and may cause a fire.
≥ Danger of explosion if battery is incorrectly replaced. Replace only
with the type recommended by the manufacturer.
≥ When disposing the batteries, please contact your local authorities
or dealer and ask for the correct method of disposal.
≥ Do not mix old and new batteries or different types at the same
time.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct sunlight for
a long period of time with doors and windows closed.
≥ Do not take apart or short circuit.
≥ Do not attempt to recharge alkaline or manganese batteries.
≥ Do not use batteries if the covering has been peeled off.
Remove batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
Information on Disposal in other Countries
outside the European Union
This symbol is only valid in the
European Union.
If you wish to discard this product,
please contact your local authorities
or dealer and ask for the correct
method of disposal.
(Inside of product)
VQT4V26
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Settings
IMPORTANT SAFETY
INSTRUCTIONS. . . . . . . . . . . 2
Precautions . . . . . . . . . . . . . . . 3
Option menu . . . . . . . . . . . . . . 27
Setup menu. . . . . . . . . . . . . . . 29
Getting started
Reference
Accessories . . . . . . . . . . . . . . . 5
Unit and media care . . . . . . . . . 5
Playable media. . . . . . . . . . . . . 6
Control reference guide . . . . . . 8
Troubleshooting guide . . . . . . 35
Messages . . . . . . . . . . . . . . . . 38
Specifications . . . . . . . . . . . . . 40
Limited Warranty . . . . . . . 45, 46
Referencia rápida en español
(Spanish Quick Reference). . . . 47
Index . . . . . . . . . . . . . Back cover
Connections & Settings
Connecting to a TV. . . . . . . . . 10
Connecting to
an amplifier/receiver . . . . . . . 11
Connecting to the network . . . 13
Settings . . . . . . . . . . . . . . . . . 14
Playback
Inserting or
removing media . . . . . . . . . . 17
HOME menu. . . . . . . . . . . . . . 18
Multi User Mode . . . . . . . . . . . 19
Playback. . . . . . . . . . . . . . . . . 20
VIERA Connect
(Enjoying Netflix, etc.). . . . . . 23
Home Network feature . . . . . . 24
“HDMI CEC” . . . . . . . . . . . . . . 26
VQT4V26
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Unit and media care
Check the supplied accessories before using this
unit.
∫ Clean this unit with a soft, dry
cloth
≥ Never use alcohol, paint thinner or benzine to
clean this unit.
1
Remote control
(N2QAYB000874)
≥ Before using chemically treated cloth, carefully
read the instructions that came with the cloth.
2
1
Batteries for remote control
AC power supply cord
(K2CB2CB00022)
∫ This unit’s lens
Use the lens cleaner (not supplied) to clean the
unit’s lens.
[For_Canada]
The enclosed Canadian French label sheet corresponds
to the English display on the unit.
∫ Clean discs
≥ Product numbers provided in this Owner’s Manual correct
as of December 2012. These may be subject to change.
≥ Do not use AC power supply cord with other equipment.
DO NOT
DO
Wipe with a damp cloth and then wipe dry.
∫ Using the remote control
Insert so the poles (i and j) match those in the
remote control.
∫ Disc and card handling
precautions
≥ Handle discs by the edges to avoid inadvertent
scratches or fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
≥ Do not use disc cleaning sprays, benzine,
thinner, static electricity prevention liquids or
any other solvent.
≥ Clean any dust, water, or foreign matter from
the terminals on the rear side of the card.
≥ Do not use the following discs:
R6/LR6, AA
(Alkaline or manganese batteries)
– Discs with exposed adhesive from removed
stickers or labels (rented discs, etc.).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart
shapes.
Point it at the remote control signal sensor on this
unit. (> 9)
VQT4V26
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable media
Media
markings
Device
Device types
Contents format
BD-Video
BD-RE
BD-R
Video
Video, JPEG, MPO
Video, MKV
BD
DVD-Video
DVD-R
Video
Video, AVCHD,
MKV, JPEG, MPO, AAC,
FLAC, MP3, WAV, WMA
DVD
DVD-R DL
DVD-RW
Video, AVCHD
Music [CD-DA]
—
+R/+RW/+R DL
Music CD
CD
MKV, JPEG, MPO
AAC, FLAC, MP3,
Music [CD-DA], WAV,
WMA
CD-R
CD-RW
—
SD Memory Card (from 8 MB to 2 GB)
SDHC Memory Card (from 4 GB to 32 GB) AVCHD, AVCHD 3D,
SD
SDXC Memory Card (48 GB, 64 GB)
MP4, JPEG, MPO
(Compatible with both mini and micro types)
MKV, MP4, MPEG2,
JPEG, MPO, AAC,
FLAC, MP3, WAV, WMA
USB devices
(up to 2 TB)
USB
—
≥ See pages 7 and 40 for more information on the types of content that can be played.
VQT4V26
6
Download from Www.Somanuals.com. All Manuals Search And Download.
∫ Discs that cannot be played in
this unit
∫ Music CD
≥ Operation and sound quality of CDs that do not
conform to CD-DA specifications (copy control
CDs, etc.) cannot be guaranteed.
Any other disc that is not specifically
supported or previously described.
≥ The digital audio content side of a DualDisc
does not meet the technical specifications of
the Compact Disc Digital Audio (CD-DA) format
so playback may not be possible.
≥ DVD-RAM
≥ Super Audio CD
≥ Photo CD
≥ DVD-Audio
≥ Video CD and Super Video CD
≥ HD DVD
∫ SD card
≥ miniSD Cards, microSD Cards,
microSDHC Cards and microSDXC
Cards can be used, but must be used
with an adaptor card. These are
usually supplied with such cards, or
otherwise customer provided.
≥ To protect the card’s contents, move
the record prevention tab (on the SD card) to
“LOCK”.
∫ Region management information
BD-Video
This unit can play BD-Video discs supporting the
region code “A”.
Example:
≥ This unit is compatible with SD Memory Cards
that meet SD Card Specifications FAT12 and
FAT16 formats, as well as SDHC Memory
Cards in FAT32 format and SDXC Memory
Cards in exFAT.
≥ If the SD card is used with incompatible
computers or devices, recorded contents may
be erased due to the card being formatted etc.
≥ Usable memory may be slightly less than the
card capacity.
DVD-Video
This unit can play DVD-Video discs supporting
the region number “1” or “ALL”.
Example:
1
2
1
ALL
4
∫ Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW
recorded by a recorder needs to be finalized by
the recorder to play on this unit. Please refer to
the recorder’s instructions.
∫ USB device
≥ This unit does not guarantee connection with all
USB devices.
∫ BD-Video
≥ This unit does not support USB device
charging.
≥ FAT12, FAT16, FAT32, and NTFS file systems
are supported.
≥ This unit supports USB2.0 High Speed.
≥ This unit supports an HDD formatted in FAT32
and NTFS. If the HDD is not recognized, the
power to the HDD may not be supplied. Supply
power from an external source.
≥ This unit supports high bit rate audio (Dolby®
Digital Plus, Dolby® TrueHD, DTS-HD High
Resolution Audio and DTS-HD Master Audio)
adopted in BD-Video.
≥ [BDT230] : If “Dolby D/Dolby D +/Dolby TrueHD”
is set to “PCM” and “DTS Neo:6” is set to “Off”,
the maximum possible number of Dolby® sound
is 5.1ch PCM. (> 30, 31)
∫ 3D
≥ 3D videos and 3D still pictures can be played
back when this unit is connected to a 3D
compatible TV using a High Speed HDMI
Cable.
≥ It may not be possible to play the above media in some
cases due to the type of media, the condition of the
recording, the recording method, and how the files were
created.
≥ The producers of the disc can control how discs are
played, so you may not always be able to control play as
described in this Owner’s Manual. Read the disc’s
instructions carefully.
≥ 2D video can be enjoyed as 3D virtually. (> 28)
VQT4V26
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Control reference guide
1
2
Turn the unit on and off
TV operation buttons
10
You can operate the Panasonic TV using the
unit’s remote control. Some buttons may not
work depending on the TV.
[Í TV] : Turn the TV on and off
[AV] : Change input
1
2
11
[i j VOL] : Adjust the volume
Select title numbers, etc./Enter numbers or
characters
12
3
3
13
4
4
5
6
7
8
9
Cancel
14
Basic playback control buttons (> 20)
Show status messages (> 21)
Show Pop-up menu/Top menu (> 21)
Show Option menu (> 27)
Colored buttons (red, green, blue, yellow)
Used for various purposes depending on the
display.
5
6
7
15
16
10 Transmit the remote control signal
11 Open or close the disc tray (> 17)
12 Select audio (> 20)
13 Show MiracastTM screen (> 24)
14 Show the Home screen of the VIERA
Connect (> 23)
17
18
19
8
9
15 Exit the menu screen
16 Show Netflix screen (> 23)
17 Show HOME menu (> 18)
18 [3, 4, 2, 1] : Move the highlight for selection
[OK] : Confirm the selection
(;1) : Frame-by-frame (> 20)
19 Return to previous screen
VQT4V26
8
Download from Www.Somanuals.com. All Manuals Search And Download.
[BDT330]
2
1
3
SD CARD
IR
Pull to flip down
the front panel.
11
Standby/on switch (Í/I) (> 14)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
still consumes a small amount of power.
Open or close the disc tray (> 17)
Blue LED
It is possible to set the LED to turn on/off.
(> 34)
Start play (> 20)
Stop (> 20)
Display
10 9 8
7
6
5 4
1
8
V.OFF LED (Video off LED)
It is possible to set the LED to turn on/off.
(> 34)
9
SD card slot (> 17)
2
3
10 Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20e up and down, 30e left and
right
4
5
6
7
11 Disc tray (> 17)
Rear panel terminals (> 10–13)
USB port (> 17)
[BDT230]
4
3
2
1
Pull to flip down
the front panel.
SD CARD
9
8
7
6
5
1
Standby/on switch (Í/I) (> 14)
7
8
SD card slot (> 17)
Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20e up and down, 30e left and
right
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
still consumes a small amount of power.
Start play (> 20)
Stop (> 20)
Open or close the disc tray (> 17)
Display
2
3
4
5
6
9
Disc tray (> 17)
Rear panel terminals (> 10–13)
USB port (> 17)
VQT4V26
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
&
Settings
Connecting to a TV
Connect the power supply cord after making all connections.
≥ Before making any connections, we recommend that you temporarily disconnect all the units from AC
power.
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized. It is recommended
that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use HDMI cables 5.0
meters (16.4 ft.) or less.
[BDT330] : Use HDMI AV OUT MAIN terminal.
To a household
AC outlet
HDMI cable
HDMI IN
AC power supply cord
(supplied)
[BDT230]
≥ This unit consumes a small amount of AC power (> 40) even when turned off. For the purpose of
power conservation, the unit can be disconnected if you will not be using it for extended period of
time.
VQT4V26
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an amplifier/receiver
Perform either one of the following connections in accordance with your amplifier/receiver input
terminal.
HDMI AV OUT
[BDT330] : Use HDMI AV OUT MAIN terminal.
HDMI cable
HDMI cable
HDMI OUT
(ARC)
HDMI IN
(ARC)
HDMI IN
[BDT230]
Amplifier/receiver
≥ Set “Digital Audio Output” (> 30).
≥ When connecting to a non-3D compatible amplifier/receiver, connect this unit to a TV, then connect
the TV and the amplifier/receiver. Please note, however, that the audio can only be up to 5.1ch.
≥ When using the TV or amplifier/receiver that does not have the indication of “(ARC)”
(non-ARC-compatible) on the HDMI terminal, the amplifier/receiver and TV must also be connected
using an optical digital cable in order to enjoy the TV’s sound through the amplifier/receiver.
HDMI AV OUT SUB [BDT330]
You can enjoy richer sound by using the HDMI AV OUT SUB terminal.
HDMI cable
HDMI cable
HDMI IN
HDMI IN
Amplifier/receiver
≥ Set “HDMI(SUB) Output Mode” to “V.OFF”. (> 30)
– Audio is output in high resolution regardless of compatibility of the amplifier/receiver with 3D.
≥ It is possible to play back 3D videos and 3D still pictures when the connected TV is 3D compatible,
even if the amplifier/receiver is not 3D compatible.
≥ The HDMI connection using HDMI AV OUT MAIN supports HDMI CEC (> 26).
The HDMI AV OUT SUB terminal is not compatible with the HDMI CEC.
VQT4V26
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTICAL
[BDT330]
Optical digital cable
OPTICAL IN
[BDT230]
Amplifier/receiver
≥ Set “HDMI Audio Output” to “Off” (> 30).
≥ Set “Digital Audio Output” (> 30).
VQT4V26
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the network
The following services can be used when this unit is connected to broadband.
≥ Firmware can be updated (> 16)
≥ You can enjoy BD-Live (> 22)
≥ You can enjoy VIERA Connect (> 23)
≥ You can access other devices (Home Network) (> 24)
≥ This unit supports Wi-Fi DirectTM and can make a wireless connection to wireless devices without
router. You can use this function when enjoying Home Network feature, etc. Internet access is not
available while connected via Wi-Fi DirectTM. (> 24, 32)
For details about connection method, refer to the instructions supplied with the connected equipment.
Wireless LAN connection
This unit has built-in Wi-Fi® and can be connected to a wireless router.
Internet
Wireless router, etc.
≥ For up-to-date compatibility information on your wireless router, refer to
(This site is in English only.)
For additional information about this unit refer to
≥ The unit is not compatible with public wireless LAN services provided in airports, stations, cafes, etc.
≥ See page 3 for the precautions for wireless LAN connection.
LAN cable connection
[BDT330]
LAN Cable
Broadband router, etc.
[BDT230]
Internet
≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN port can damage the unit.
VQT4V26
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Easy Network Setting
After completing “Easy Settings”, you can perform
“Easy Network Setting”.
Easy Settings
After connecting your new player for the first time
and pressing [Í], the basic settings screen will
appear.
Wired connection
Select “Wired” and press [OK].
Easy Network Setting
Preparation
Turn on the TV and select the appropriate
Select a connection mode.
video input.
1 Press [Í].
Setup screen appears.
Wired
2 Follow the on-screen instructions to
continue with the settings.
Wireless
OK
RETURN
Follow the on-screen instructions to establish
your connection settings.
≥ You can perform this setup anytime by selecting “Easy
Settings” in the Setup menu. (> 33)
Wireless connection
1 Select “Wireless” and press [OK].
2 Select “Search for wireless network” or
“WPS (PUSH button method)” and press
[OK], then follow the on-screen
instructions to continue with the settings.
Wireless Settings
Select a connection method.
Please refer to the operating instructions of your wireless
access point about connection methods.
Search for wireless network
WPS (PUSH button method)
∫ “WPS (PUSH button method)”
If you are using a wireless router that supports
WPS (Wi-Fi Protected SetupTM), you can easily
perform the settings.
VQT4V26
14
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Enter your encryption key (password).
≥ You can switch between capital and lower
case letters by pressing the “Shift” key.
∫ “Search for wireless network”
The available wireless networks will be displayed.
To obtain your network name (SSID*) and
encryption key (password).
Encryption Key (Password)
l
e.g.
The default settings may be
printed on the router. If the
SSID and password have been
changed, consult the person
responsible for setting up your
network.
Shift
Delete
Finish
SSID XXXXXXXXXXXX
KEY XXXXXXXXXXXX
PIN XXXXXXXXX
a
h
o
b
i
c
j
d
k
r
e
l
f
m
t
g
n
1
4
7
*
2
5
8
0
‘
3
6
9
#
“
p
w
/
q
x
:
s
z
_
u
v
y
.
@
,
Space
~
-
;
Symbols
Alphanumeric
Other Characters
For more details, refer to the
manual supplied with the wireless broadband
router, or contact your Internet provider.
OK
RETURN
For more information or assistance, refer to
(U.S. customers only)
To enter your network name (SSID) manually
If your network name (SSID) is not displayed in
step 1, follow these steps.
1
Select your network name and press [OK].
≥ If your network name is not displayed,
search again by pressing the red button on
the remote control. Stealth SSID will not be
displayed; in this case, enter manually.
1
To display the network name (SSID) input
screen :
Press [HOME]
> press [OK] to select “Setup”
> select “Player Settings”
Connection Setting
> select “Network” and press [OK]
> select “Network Settings” and press [OK]
> select “Wireless Settings” and press [OK]
> select “Connection Setting” and press [OK]
> select “Manual setting” and press [OK]
Press [OK] to select “SSID” and enter your
SSID.
Select a wireless network for connection.
SSID
Reception
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
2
Wireless Settings
Enter your network name (SSID) to connect.
OK
Search again
OPTION
RETURN
SSID
When your wireless network is encrypted
Set
2
Press [OK] to select “Encryption Key”.
Wireless Settings
≥ If your wireless network is encrypted, go to
Enter the encryption key (password) of the wireless network.
step 2.
Encryption Key
Set
VQT4V26
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Firmware updates
≥ Refer to the operating instructions of the hub or router.
≥ WPS (Wi-Fi Protected Setup) is a standard that facilitates
settings relating to the connection and security of wireless
LAN devices. To see whether your wireless router supports
WPS, check the wireless router operating instructions.
≥ You can perform this setup anytime by selecting “Easy
Network Setting” in the Setup menu. (> 32)
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
≥ You can redo these settings individually using “Network
Settings”. (> 32)
≥ Do not use this unit to connect to any wireless network for
which you do not have usage rights.
This unit is capable of checking the firmware
automatically when connected to the Internet via
a broadband connection.
When a new firmware version is available, the
following message is displayed.
During automatic searches in a wireless network
environment, wireless networks (SSID) for which you do
not have usage rights may be displayed; however, using
these networks may be regarded as illegal access.
≥ After performing network settings on this unit, the settings
(encryption level, etc.) of the wireless router might change.
When you have trouble getting online on your PC, perform
the network settings on your PC in accordance with the
settings of wireless router.
≥ Please be aware that connecting to a network without
encryption may result in the content of the communication
being illegitimately viewed by a third party, or the leaking of
data such as personal or secret information.
New firmware is available.
Please update firmware in Setup.
To update the firmware
Press [HOME]
> press [OK] to select “Setup”
> select “Player Settings”
* SSID:
> select “System” and press [OK]
> select “Firmware Update” and press [OK]
> select “Update Now” and press [OK]
An SSID (Service Set IDentification) is a name used by
wireless LAN to identify a particular network.
Transmission is possible if the SSID matches for both
devices.
DO NOT DISCONNECT the unit from the AC
power or perform any operation while the update
takes place.
After the firmware is installed, “FIN” will be
displayed on the unit’s display. Unit will restart
and the following screen will be displayed.
Reprogramming the
remote control
If you have more than one Panasonic player/
recorder and the remote control operates both
products at once, you will need to change the
remote control code to prevent this occurrence.
(> 34, “Remote Control Code”)
The firmware was updated.
Current Version: x.xx
OK
RETURN
≥ If downloading on this unit fails or this unit is not
connected to the Internet, then you can download the
latest firmware from the following website and burn it
to a CD-R to update the firmware.
(This site is in English only.)
To show the firmware version on this unit.
(> 34, “Firmware Version Information”)
≥ Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
≥ If you do not want to check for the latest firmware version,
set “Automatic Update Check” to “Off”. (> 34)
VQT4V26
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Inserting or removing
media
[BDT330]
SD CARD
IR
[BDT230]
SD CARD
Notes
≥ When inserting a media item, ensure that it is
facing the right way up.
≥ When removing the SD card, press the center
of the card and pull it straight out.
≥ If you connect a Panasonic product with a USB
connection cable, the setup screen may be
displayed on the connected equipment. For
details, refer to the instructions for the
connected equipment.
CAUTION
Do not place objects in front of the unit. The disc
tray may collide with objects when it is opened,
and this may cause malfunction.
VQT4V26
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Videos/Photos/Music
Disc
HOME menu
Major functions of this unit can be operated from
the HOME menu.
Play back the contents. (> 20)
≥ When multiple contents are
recorded, select the types of
contents or the title.
Preparation
Turn on the TV and select the appropriate video
input on the TV.
USB
SD Card
Network
1 Press [Í] to turn on the unit.
≥ After network service introduction banner is
shown, the HOME menu is displayed.
–When connected to the network, the
banner content may be changed.
–You can disable the “Start-up Banner”
(> 34).
Network
Service
Displays the Home screen of
VIERA Connect. (> 23)
DLNA Client (> 24)
Miracast (> 24)
Home
Network
Media Renderer (> 25)
Setup
2
Press [OK] or [
3
,
4
,
2
,
1] to select the item.
Player
Settings
≥ If there are any other items, repeat this
step.
(> 29)
USB
Management
(> 22)
HOME
Changes the background of
HOME menu.
Network
Blu-ray Disc Player
Wallpaper
Photos
Setup
Music
To show the HOME menu
Press [HOME].
Videos
Personalize
1st user
≥ Items to be displayed may vary with the media.
≥ Where necessary, set “Mixed Data Disc Option” when
using a disc with both data files (MP3, JPEG, MKV, etc.)
and Video (BDAV and AVCHD). (> 34)
VQT4V26
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi User Mode
Personalizing a new user
Multi User Mode allows individuals to customize
settings and switch to their saved settings easily.
Up to 4 people can use the unit with their own
settings.
1 Press [HOME].
2 Press the colored button that indicates
new user personalization.
The following settings can be personalized:
≥ The user icon
≥ The wallpaper of HOME menu
≥ The audio and picture settings (> 27, 29)
3 Select an item and change the settings
according to the indications.
The following items can be set.
Input
HOME
Personalize a user name.
Nickname
User 1
A
Network
Blu-ray Disc Player
Personalize a user icon.
Photos
Setup
Music
Select from Illustrations
The image can be selected from
Videos
prepared illustrations.
Select Icon
User 1
Personalize
2nd user
Create from Photos
B
You can select a photo in
recording media as an icon.
(> 27, “Icon Personalization”)
A
B
The user name and icon currently selected
Personalize a new user and switch between
users with colored buttons.
Personalize a background of the
HOME menu.
Select
Wallpaper
≥ In addition to default wallpapers,
you can select a photo in
recording media as a wallpaper.
(> 27, “Wallpaper”)
4 Select “Confirm” and press [OK].
To change the personalized user information
Select “Edit User Information” from Setup menu.
(> 34)
Switching the user
Press the colored buttons in the HOME menu
to switch to the user corresponding to the
button.
VQT4V26
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Operations during playback
1 Insert the media.
The following functions may not work depending
on the media and contents.
Playback starts depending on the media.
Stop
2 Select the item to play and press [OK].
Press [∫STOP].
Repeat this procedure if necessary.
The stopping point is memorized.
Resume play function
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE
DISPLAYED. Press [∫STOP] when you have finished
playback to protect the unit’s motor, your TV screen and so
on.
Press [1PLAY] to restart from this point.
≥ The point is cleared if the media is removed.
≥ On BD-Video discs including BD-J, the
resume play function does not work.
≥ MKV: Successive play is not possible.
≥ It is not possible to play back AVCHD and MPEG2 videos
which have been dragged and dropped or copied and
pasted to the media.
≥ To save on electricity, this unit is turned off automatically if
there is no button operation for about 30 minutes when not
playing back (such as when paused or displaying the
menu, displaying still pictures, etc.). (Compatible with
ENERGY STAR)
Pause
Press [;PAUSE].
≥ Press [;PAUSE] again or [1PLAY] to restart
play.
Search/Slow motion
Search
While playing, press [SEARCH6] or
[SEARCH5].
Slow motion
While paused, press [SEARCH5].
The speed increases up to 5 steps.
≥ Music, MP3, etc.: The speed is fixed to a single
step.
≥ Press [1PLAY] to revert to normal playback
speed.
Skip
While playing or paused, press [:] or
[9].
Skip to the title, chapter or track.
Frame-by-frame
While paused, press [1] (;1).
≥ Press and hold to change in succession
forward.
≥ Press [1PLAY] to revert to normal playback
speed.
Changing audio
Press [AUDIO].
You can change the audio channel number or
soundtrack language, etc.
VQT4V26
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying menus and
playback information
Enjoying 3D video and
photos
Preparation
Connect this unit to a 3D compatible TV.
(> 10, 11)
≥ Perform the necessary preparations for the TV.
Show top menu/pop-up
menu
Press [POP-UP MENU/TOP MENU].
≥ Select the item and press [OK].
≥ Play back following the instructions displayed
on the screen.
≥ 3D Settings (> 28, 31)
Show the status messages
While playing, press [STATUS].
≥ Please refrain from viewing 3D images if you do not feel
well or are experiencing visual fatigue.
In the event that you experience dizziness, nausea, or
other discomfort while viewing 3D images, discontinue use
and rest your eyes.
≥ 3D video might not output the way it is set in “HDMI
Resolution” and “24p(4K)/24p Output” [BDT330]/“24p
Output” [BDT230]. (> 29, 30)
≥ When playing back 3D photos from “Photos” screen, select
from the “3D” list. (Still pictures in “2D” are played back in
2D.)
The status messages give you information about
what is currently being played. Each time you
press [STATUS], the display information may
change or will disappear from the screen.
≥ Depending on media and contents, the display
may change or may not appear.
e.g., BD-Video
If “2D” and “3D” indications are not displayed, press the red
button on the remote control to switch the view of playback
contents.
A
B
BD-Video
T1 C1 0:05.14
Play
0:20.52
D
C
A
B
C
D
T: Title, C: Chapter, PL: Playlist
Elapsed time in the title
Current position
Total time
e.g., JPEG
1 / 26
Date
Size
11/12/2007
500 x 375
Manufacturer
Equipment
VQT4V26
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying BD-Live
Slideshow
Play a slideshow of photos and adjust various
settings during the playback.
With “BD-Live” discs, you can enjoy bonus
contents that use Internet access.
For this BD-Live function, connection of a USB
device is necessary along with Internet
connection.
1 Insert the media.
2 Select “Photos”.
1 Perform network connection and settings.
(> 13, 14)
3 Select an item and press the green button.
The following items can be set.
2 Connect a USB device with 1 GB or more
free space.
Start the slideshow.
Start
Slideshow
You can display still pictures in
the selected folder one by one at
a constant interval.
≥
The USB device is used as the local storage.
3 Insert the disc.
Display
Interval
Change the display interval.
∫ Deleting data on the USB device
Select “USB Management” in the HOME menu
(> 18), then select “BD-Video Data Erase” and
press [OK].
Transition
Effect
Select the effect when sliding
pictures.
Set whether to repeat the
slideshow.
Repeat Play
≥ The usable functions and the operating method may vary
with each disc, please refer to the instructions on the disc
and/or visit their website.
≥ Still pictures displayed as “
with this unit.
” cannot be played back
≥ “BD-Live Internet Access” may need to be changed for
certain discs (> 33).
VQT4V26
22
Download from Www.Somanuals.com. All Manuals Search And Download.
VIERA Connect
(Enjoying Netflix, etc.)
≥ When playing content in the media, VIERA Connect cannot
be accessed by pressing [INTERNET].
≥ In the following cases, settings are possible using the
Setup menu items.
– When restricting the use of VIERA Connect
(> 33, “Network Service Lock”)
– When correcting the displayed time
VIERA Connect allows you to access some
specific websites supported by Panasonic, and
enjoy Internet contents such as photos, videos,
etc. from VIERA Connect Home screen.
≥ Some services such as Netflix require a
registered account.
(> 32, “Time Zone”, “DST”)
≥ If using slow Internet connection, the video may not be
displayed correctly. A high speed Internet service with a
speed of at least 6 Mbps is recommended.
≥ Be sure to update the firmware when a firmware update
notice is displayed on the screen. If the firmware is not
updated, you may not be able to use VIERA Connect
function properly. (> 16)
For details of your Netflix account, refer to
Netflix.
≥ VIERA Connect Home screen is subject to change without
notice.
VIERA Connect provides a variety of
selected Internet services such as the
following.
≥ Online movie rental service
≥ Video browsing service
≥ The services through VIERA Connect are operated by their
respective service providers, and service may be
discontinued either temporarily or permanently without
notice. Therefore, Panasonic will make no warranty for the
content or the continuity of the services.
≥ Some features of websites or content of the service may
not be available.
≥ Some content may be inappropriate for some viewers.
≥ Some content may only be available for specific countries
and may be presented in specific languages.
XXXXX
*
XXXXX
X
XXXXXXXXXXXXXXXXXXXX
XXXXXXXX
XXXXXX
Fi
MORE
BACK
XXXXXXXXXXX
XXXX
XXXX
XXXXXXXX
Market
Internet
*
Images are for illustration purposes, contents may change
without notice.
Preparation
≥ Network connection (> 13)
≥ Network setting (> 14)
1 Press [INTERNET].
≥ Netflix can be accessed directly by pressing
[NETFLIX] button.
2 Select the item and press [OK].
To exit from VIERA Connect
Press [HOME].
VQT4V26
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Home Network feature
Playing back contents on
the DLNA server
Using MiracastTM
You can share photos, videos and music stored in the
DLNA Certified media server (PC with Windows 7
installed, smartphone, etc.) connected to your home
network, and enjoy the contents with this player.
≥ About support format of DLNA (> 41).
≥ Before using the DLNA feature, be sure to
configure the DLNA server on your Home
Network.
You can enjoy the content you are viewing on a
Miracast-compatible smartphone, etc. on the big
screen of your TV.
≥ Compatible with AndroidTM device, ver. 4.2 and
above and Miracast certified.
For information on whether the smartphone,
etc. supports Miracast, contact the
manufacturer of the device.
Server
Player
Preparation
1
2
3
Perform network connection (> 13) and
network settings (> 14) of this unit.
Perform Home Network settings of the
connected equipment.
Add the contents and folder to the libraries of the
Windows Media® Player or the smartphone, etc.
Miracast
Player
compatible device
1 Press [MIRACAST].
≥
Playlist of Windows Media® Player can play back
only the contents that are stored in the libraries.
2 Operate the Miracast compatible device.
≥ On the device, enable Miracast and select
this unit (DMP-BDT330 or DMP-BDT230)
as the device to be connected.
1 Press [HOME].
2 Select “Network”.
3 Select “Home Network”.
4 Select “DLNA Client”.
For details, refer to the instructions supplied
with the device.
To exit from Miracast
Press [HOME].
≥ The list can be updated by pressing the red
button on the remote control.
≥ The connection method can be switched to
Wi-Fi Direct by pressing the green button
on the remote control.
5 Select the equipment and press [OK].
6 Select the item to play and press [OK].
≥ You may be able to use convenient
functions depending on the content by
pressing [OPTION].
e.g.,
≥ Control Panel is
displayed once the
playback starts.
EXIT
Press [OK] if the
Control Panel is not
displayed, and press
[RETURN] to hide the Control Panel.
To exit from Home Network
Press [HOME].
VQT4V26
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Digital Media
Controller
You can use a smartphone or tablet as the Digital
Media Controller (DMC) to play back contents
from DLNA server on the Renderer (this unit).
About DLNA and Media renderer
For more details, refer to the following website
and the operating instructions for each of the
equipment.
(This site is in English only.)
Possible applications:
≥ Wi-Fi Direct connection while using Home Network feature
is only temporary, and the network connection method
returns to the original setting when exiting.
≥ Depending on the device or connection environment, the
data transfer rate may decrease.
*
Server
≥ Depending on the contents and the connected equipment,
playback may not be possible.
Renderer
*
≥ Items displayed in gray on the display cannot be played
back by this unit.
Controller
≥ This unit can be played back via connected equipment only
when controlled using DMC.
*
Server
+
Renderer
Controller
*
DMC compatible software should be installed.
Preparation
Perform steps 1to 3. (> 24)
4
Perform the “Remote Device Settings”.
(> 32)
≥ You can register up to 16 devices.
1 Press [HOME].
2 Select “Network”.
3 Select “Home Network”.
4 Select “Media Renderer”.
5 Select “Home Network” or “Wi-Fi Direct”
and press [OK], then follow the indications
on the screen.
6 Operate the DMC compatible devices.
To exit from Media Renderer screen
Press [HOME].
VQT4V26
25
Download from Www.Somanuals.com. All Manuals Search And Download.
“HDMI CEC”
Power off link
This unit supports “HDMI CEC” (Consumer
Electronics Control) function.
All connected equipment compatible with “HDMI
CEC”, including this unit, automatically turns off
when you switch the TV off.
You can use this function by connecting the
equipment with an HDMI cable*. See the
operating instructions for connected
equipment for operational details.
* [BDT330] : Only when connecting via an HDMI AV OUT
MAIN terminal on this unit.
≥ Operation cannot be guaranteed on all HDMI CEC
devices.
Preparation
1
2
3
Set “HDMI CEC” to “On” (> 34). (The default
setting is “On”.)
Set the “HDMI CEC” operations on the
connected equipment (e.g., TV).
Turn on all “HDMI CEC” compatible
equipment and select this unit’s input channel
on the connected TV so that the “HDMI CEC”
function works properly.
Repeat this procedure when the
connections or settings are changed.
Automatic input switching
Power on link
When play starts on the unit, the TV will
automatically switch the input channel and the
screen of this unit will be displayed.
Additionally when the TV is off, the TV will
automatically turn on.
≥ [BDT330] : When “HDMI(SUB) Output Mode”
(> 30) is set to “Normal” and the power of the
device connected to the HDMI AV OUT SUB is
turned on, the Power on link to the device
connected to the HDMI AV OUT MAIN will not
work.
VQT4V26
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Option menu
Operation Menu
A variety of playback operations and settings can
be performed from this menu.
∫ Soundtrack
Available options differ depending on the playing
contents and the condition of the unit.
Show or change the soundtrack.
∫ Audio channel
Select the audio channel number.
About Multi User Mode
: Settings of the items with this indication are
saved by the respective users registered in the
HOME menu.
Please refer to page 19 for details about user
registration and switching.
∫ Subtitle
Change the subtitle settings.
∫ Angle
Select the number of the angle.
1 Press [OPTION].
≥ When playing music, select “Playback
∫ Repeat Play
Settings” and press [OK].
Select the item that you want to repeat.
≥ The items displayed differ depending on the
type of media.
e.g., BD-Video
≥ Select “Off” to cancel.
Operation Menu
Soundtrack
1
ENG Dolby TrueHD ...
Subtitle
∫ Shuffle
Angle
1
Repeat Play
Status
Off
Select whether or not to play random.
Primary Video
Secondary Video
Top Menu
MPEG-4 AVC
∫ Start Slideshow
Start the slideshow.
Pop-up Menu
∫ Status
Show the status messages.
2 Select an item and change the settings.
∫ Rotate Right
∫ Rotate Left
Rotate the still picture.
To exit the screen
Press [OPTION].
Regarding Language : (> 42)
∫ Wallpaper
Set the still picture to the wallpaper of HOME
menu. (> 18)
∫ Icon Personalization
Set the still picture as your user icon. (> 19)
∫ Video
The recording method of original video appears.
∫ Primary Video
The recording method of original primary video
appears.
VQT4V26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
∫ Secondary Video
Select on/off for images. The
Audio Settings
recording method of original
video appears.
≥ During search/slow motion or
frame-by-frame, only the
primary video is displayed.
∫ Dialog Enhancer
The volume of the center channel is raised to
make dialog easier to hear.
Video
≥ This function is effective for audio from the
HDMI terminal or the OPTICAL terminal only
when “Digital Audio Output” is set to “PCM”
(> 30). (However, in this case, audio is output
as 2ch from the OPTICAL terminal.)
Select on/off for audio and the
language.
Soundtrack
∫ Top Menu
Display Top Menu.
3D Settings
∫ Pop-up Menu
Display Pop-up Menu.
∫ Signal Format
Original
Keep original picture format.
∫ Menu
Display Menu.
3D picture format comprising of
left and right screens.
Side by side
Converts 2D pictures to 3D
effect.
2D to 3D
Video Settings
∫ Distance
∫ Picture Mode
Set the amount of depth perception.
Select the picture quality mode during play.
≥ If you select “User”, you can change settings in
“Picture Adjustment”.
∫ Pop-Out Level
3D position for the Option menu or message
screen, etc. can be adjusted during 3D playback.
∫ Picture Adjustment
Specific picture quality settings can be changed.
∫ Progressive
Select the method of conversion for progressive
output to suit the type of material being played.
≥ When the content is distorted, change the
settings from “Auto” to “Video”.
∫ 24p
Movies and other material recorded on
DVD-Video at 24p are output at 24p.
This works only in the following cases:
– [BDT330] : “24p(4K)/24p Output” is set to
“24p(4K)” or “24p” (> 29).
– [BDT230] : “24p Output” is set to “On” (> 30).
∫ Reset to Default Video Settings
Return video settings to the factory preset.
VQT4V26
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup menu
Video
Change the unit’s settings if necessary. The settings
remain intact even if you switch the unit to standby.
Some items in the Setup menu are common to
the Option menu. You can get the same effect
with both menus.
∫ Picture Mode
(> 28)
∫ Picture Adjustment
(> 28)
About Multi User Mode
∫ HDMI Output
Press [OK] to show the following settings:
: Settings of the items with this indication are saved
by the respective users registered in the HOME menu.
Please refer to page 19 for details about user
registration and switching.
¾HDMI Resolution
The items supported by the connected devices are
indicated on the screen as “¢”. When any item
without “ ” is selected, the images may be distorted.
≥ If “Auto” is selected, the best suited output
resolution to the connected TV is
¢
1 Press [HOME].
2 Press [OK] to select “Setup”.
3 Select “Player Settings”.
Player Settings
automatically selected.
≥ To enjoy high-definition video up-converted to
1080p, you need to connect the unit directly
to 1080p compatible HDTV (High Definition
TV). If this unit is connected to an HDTV
through other equipment, the other equipment
must also be 1080p compatible.
Picture Mode
Normal
Video
Audio
3D
Picture Adjustment
HDMI Output
Language
Network
Ratings
System
¾24p(4K)/24p Output [BDT330]
This setting is for selecting the output method
for content recorded in 24p*1, such as movies.
OK
RETURN
Outputs signals by upconverting
them to 4K*2.
24p(4K)
4 Select an item and change the settings.
24p
Outputs in 24.
To exit the screen
Press [HOME].
≥ Connect the compatible TV for each (4K or
1080/24p) output to the HDMI AV OUT MAIN
terminal of this unit.
≥ “24p(4K)” works only when playing back in
2D.
≥ When playing DVD-Video, set this setting to
“24p(4K)” or “24p”, and then “24p” in “Video
Settings” (> 28) to “On”.
≥ When BD-Video/DVD-Video images other
than 24p are played, images are output at
60p.
(Continued on the next page.)
VQT4V26
29
Download from Www.Somanuals.com. All Manuals Search And Download.
¾24p Output [BDT230]
Audio
When this unit is connected to a TV supporting
1080/24p output, movies and other material
recorded at 24p*1 are output at 24p.
≥ When playing DVD-Video, set to “On” and
then set “24p” in “Video Settings” (> 28) to
“On”.
≥ When BD-Video/DVD-Video images other
than 24p are played, images are output at
60p.
∫ Dialog Enhancer
(> 28)
∫ Dynamic Range Compression
You can listen at low volumes but still hear dialog
clearly.
(Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only)
≥ “Auto” is effective only when playing Dolby
TrueHD.
¾HDMI Color Mode
This setting is for selecting color-space
conversion of the image signal.
∫ Digital Audio Output
Press [OK] to show the following settings:
¾Deep Color Output
¾Dolby D/Dolby D +/Dolby TrueHD
¾DTS/DTS-HD
Select the audio signal to output.
This setting is for selecting whether to use Deep
Color output when a TV that supports Deep
Color is connected.
≥
Select “PCM”, when the connected equipment
cannot decode the respective audio format. This
unit decodes the audio format and transmits to the
connected equipment.
¾Contents Type Flag
Depending on the playback content, the TV will
output adjusting to the optimal method when a
TV that supports this function is connected.
≥
Not making the proper settings may result in noise.
¾BD-Video Secondary Audio
¾HDMI(SUB) Output Mode [BDT330]
Set to output the video from the HDMI AV OUT
SUB terminal or not.
Select whether or not to mix the primary and
secondary audio (including the button click sound).
If “Off” is selected, the unit outputs the primary
audio only.
*1
*2
A progressive image recorded at a rate of 24 frames per
second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in accordance
with the film materials.
¾HDMI Audio Output
A high resolution image/display technology of
approximately 4000 (width) k 2000 (height) pixels.
This setting selects whether or not to output
audio from HDMI.
≥ Select “Off” when the TV is connected to this
unit via HDMI AV OUT terminal, and this unit
is also connected to other devices, such as
an amplifier/receiver via an OPTICAL
terminal.
VQT4V26
30
Download from Www.Somanuals.com. All Manuals Search And Download.
∫ PCM Down Conversion
3D
Select how to output audio with a sampling
frequency of 96 kHz for the PCM output from the
OPTICAL.
≥ If “On” is selected, the signals that are
converted to 48 kHz are output.
≥ If “Off” is selected, and the connected
equipment does not support 96 kHz, the sound
will not be output normally.
∫ 3D BD-Video Playback
Select the playback method of 3D compatible
video software.
∫ 3D AVCHD Output
Select the output method of 3D AVCHD videos.
≥ Signals are converted to 48 kHz despite the
settings in the following cases:
∫ 3D Playback Precautions
– when the signals have a sampling frequency
of 192 kHz
– when the disc has copy protection
– when “BD-Video Secondary Audio” is set to
“On”
Set to display or hide the 3D viewing warning
screen when playing back the 3D compatible
video software.
∫ Pop-Out Level
(> 28)
∫ Downmix
Select the downmix system of multi-channel to
2-channel sound.
≥ Select “Surround encoded”, when the
connected equipment supports the virtual
surround function.
Language
∫ Audio Language
Choose the language for audio.
≥ If “Original” is selected, the original language of
each disc will be selected.
≥ Enter a code (> 42) when you select “Other
¢¢¢¢”.
≥ The downmix effect is not available when
“Digital Audio Output” is set to “Bitstream”.
≥ The audio will be output in “Stereo” in the
following cases:
– AVCHD playback
∫ Subtitle Language
Choose the language for the subtitle.
– Playback of secondary audio (including the
button click sound).
≥ If “Auto” is selected and the language selected
for “Audio Language” is not available, subtitles
of that language will automatically appear if
available on that disc.
≥ Enter a code (> 42) when you select “Other
¢¢¢¢”.
∫ DTS Neo:6
2ch (2.1ch) audio is expanded to 7ch (7.1ch)
before it is output.
≥ Audio expansion is enabled in the following
cases:
– When you have selected “PCM” in “Digital
Audio Output”.
∫ Menu Language
– When outputting audio by using an HDMI
cable.
Choose the language for the disc menus.
≥ Enter a code (> 42) when you select “Other
¢¢¢¢”.
∫ Subtitle Text
Select a suitable item according to the language
used for MKV subtitles text.
≥
This item is displayed only after playing back a file.
∫ On-screen Language
Choose the language for menus and on-screen
messages.
VQT4V26
31
Download from Www.Somanuals.com. All Manuals Search And Download.
¾Network Service Settings (> 23)
(VIERA Connect)
Network
∫ Easy Network Setting (> 14)
Press [OK] to show the following settings:
∫ Network Settings
Time Zone
Perform network-related settings individually.
Press [OK] to show the following settings:
Set the unit’s time to match your location.
≥ Some VIERA Connect contents require the
time zone to be set. Set the time zone if
necessary.
¾LAN Connection Mode
Select the LAN connection method.
≥ Select “Wireless Master” when you make a
direct wireless connection between this unit
and a Home Network device. Internet
connection is not available when this item is
selected.
DST
Select “On” when using Daylight Saving time.
¾Network Drive Connection
It is possible to access the shared folder of
equipment not compatible with DLNA, such as
the Windows XP operating system, and play
back video, still pictures, and music on this unit.
For the setting and operation method of
connected equipment, refer to the following
website.
¾Wireless Settings
This allows the wireless router and connection
settings to be set. Current connection settings
and connection state can be checked.
Connection Setting
The wireless router connection wizard will be
displayed.
(This site is in English only.)
¾Remote Device Settings (> 25)
Double Speed Mode Setting (2.4GHz)
Set the connection speed for a 2.4 GHz
wireless format.
≥ If you connect using the “Double Speed
Mode (40MHz)”, 2 channels use the same
frequency band, and there is consequently
a greater risk of reception interference. This
can cause the connection speed to drop or
become unstable.
Press [OK] to show the following settings:
Remote Device Operation
Enable to operate by DMC.
≥ If “On” is selected, “Quick Start” will be
activated.
Setting Unit Name
Set the name of this unit to be displayed on
the connected equipment.
¾IP Address/DNS Settings
This is for checking the state of the network
connection and setting the IP address and
DNS-related.
Registration Type
Allow connection to all the
Auto
equipment accessing this unit.
Press [OK] to show the respective setting.
Set the permission for
¾Proxy Server Settings
individual equipment
connections accessing this
unit.
Manual
This is for checking the state of connection with
the Proxy server and performing settings.
Press [OK] to show the respective setting.
Remote Device List
Registering/deregistering of the displayed
equipment can be performed when “Manual”
in “Registration Type” is selected.
VQT4V26
32
Download from Www.Somanuals.com. All Manuals Search And Download.
¾BD-Live Internet Access (> 22)
System
You can restrict Internet access when BD-Live
functions are used.
∫ Easy Settings
≥ If “Allow ( Limited )” is selected, Internet
access is permitted only for BD-Live contents
which have content owner certificates.
You can execute basic settings.
∫ Display Settings
Press [OK] to show the following settings:
¾TV Aspect
Ratings
Set to match the type of TV connected.
The following items use the same password.
Don’t forget your password.
When connected to a 4:3 aspect TV and playing
16:9 ratio image:
∫ DVD-Video Ratings
Set a ratings level to limit DVD-Video play.
The sides are cut
off so the picture
4:3 Pan &
Scan
fills the screen.
When playing
BD-Video, video is output as “4:3
Letterbox”.
∫ BD-Video Ratings
Set an age limit of BD-Video play.
∫ Network Service Lock
You can restrict the usage of VIERA Connect.
Black bands
appear at the top
and bottom of the
picture.
4:3
Letterbox
When connected to a 16:9 widescreen TV and
playing 4:3 ratio image:
Video is displayed as a 4:3 ratio
16:9
image in the center of the
screen.
Video is displayed as a
horizontally stretched 16:9
image.
16:9 Full
¾Screen Saver Function
This is to prevent image retention on the
screen.
≥ When this is set to “On”:
If a list of playback content is displayed and
there is no operation for 10 minutes or more,
the screen switches to HOME menu
automatically.
≥ While playing and pausing, etc., this function
is not available.
¾Status Messages
Choose whether to show status messages
automatically.
VQT4V26
33
Download from Www.Somanuals.com. All Manuals Search And Download.
∫ Remote Control Code
¾HDMI CEC
Set to use “HDMI CEC” function when
connected via HDMI cable to a device that
supports “HDMI CEC”.
Change the remote control code if other
Panasonic products react to this remote control.
≥ Select “Off” when you do not want to use
“HDMI CEC”.
∫ Firmware Update (> 16)
Press [OK] to show the following settings:
∫ Unit Settings
Press [OK] to show the following settings:
¾Automatic Update Check
When this equipment remains connected to the
Internet, it will check for the latest firmware
version when it is turned on and you can update
it if necessary.
¾Mixed Data Disc Option
Select the playback contents on discs with both
data files and Video.
≥ If “MP3/JPEG/MKV” is selected, the video
menu function (except MKV) cannot be
played back.
¾Update Now
You can update the firmware manually if a
firmware update is available.
≥ If “BDAV/AVCHD” is selected, data file cannot
be played back.
∫ System Information
Press [OK] to show the following settings:
¾Front Panel Display
¾License
Changes the brightness of the unit’s display.
≥ If “Auto” is selected, the display is set to bright
and only dimmed during playback.
Information about the software used by this unit
is displayed.
¾Firmware Version Information
Display firmware version of this unit and
wireless LAN module.
¾Blue LED [BDT330]
Set whether to light the blue LED in the center
of this unit when turned ON.
¾HDMI(SUB) V.OFF LED Control [BDT330]
∫ Restore Default Settings
This returns all values in the Setup menu and the
Option menu to the default settings, except for
some settings of network, ratings, remote control
code, language, etc.
Set to light the HDMI (SUB) V.OFF LED or not.
≥ This will light when “HDMI(SUB) Output
Mode” (> 30) is set to “V.OFF”, and the
power of the connected equipment to the
HDMI AV OUT SUB is on.
¾Edit User Information
Change the user information registered in the
HOME menu.
∫ Start-up Banner
Select whether to display the banner after turning
on this unit. (> 18)
∫ Quick Start
Speed of start-up from standby mode is
increased.
≥ When set to “On”, the internal control unit will be
powered and the idle power consumption will
increase compared to when set to “Off”. (About
the power consumption > 40)
VQT4V26
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Troubleshooting guide
General operation
Before requesting service, please perform the
following steps.
To return to the factory preset.
¾
Select “Yes” in “Restore Default Settings” in
Do you have the latest firmware installed?
Panasonic is constantly improving the unit’s
firmware to ensure that our customers are
enjoying the latest technology. (> 16)
4
Make the following checks and visit our
website for more information.
For U.S.A. :
Enter the model number.
For Canada :
the Setup menu. (> 34)
To return all settings to the factory preset.
¾
1
2
Reset the unit as follows:
Turn the unit on.
Press and hold [OK], the blue button and the
yellow button on the remote control at the
same time for more than 5 seconds.
– “00RET” is displayed on the unit’s display.
Press [1] (right) repeatedly on the remote
control until “08FIN” is displayed on the unit’s
display.
3
4
4
Press and hold [OK] for more than 5 seconds.
Or visit our website to find a service center.
You can find a service center near you easily
on our website.
The remote control does not work properly.
¾
Change the batteries in the remote control.
(> 5)
Other support information:
“Customer Services Directory (United States
and Puerto Rico)” (> 45) or “Limited Warranty
(Only for CANADA)” (> 46).
¾
The remote control and this unit are using
different codes. If “SET ” is displayed on the
unit’s display when a button is pressed on the
remote control, change the code on the
remote control. (> 38)
The following do not indicate a problem with
this unit:
– Regular disc rotating sounds.
– Image disturbance during search.
– Image disturbance when replacing 3D discs.
The TV tuner mode is not displayed when the
TV is switched on.
¾
This phenomenon may occur, depending on
the TV setting, when “Quick Start” is set to
“On”.
∫ Unit does not respond to remote
¾
Depending on the TV, this phenomenon may
be prevented by reconnecting the HDMI cable
to a different HDMI input terminal or by
changing the HDMI auto connection setting.
control or front panel buttons.
Disconnect AC power supply cord, wait 1 minute,
then reconnect AC power supply cord.
∫ Cannot eject disc.
You have forgotten your ratings password.
You want to cancel the ratings level.
1
Turn the unit on.
¾
1
2
The ratings level returns to the factory preset.
Turn the unit on.
2
Press and hold [OK], the blue button and the
yellow button on the remote control at the
same time for more than 5 seconds.
– “00RET” is displayed on the unit’s display.
Press [1] (right) repeatedly on the remote
control until “06FTO” is displayed on the unit’s
display.
Press and hold [OK], the blue button and the
yellow button on the remote control at the
same time for more than 5 seconds.
– “00RET” is displayed on the unit’s display.
Press [1] (right) repeatedly on the remote
control until “03 VL” is displayed on the unit’s
3
4
3
4
Press [OK].
display
.
Press [OK].
VQT4V26
35
Download from Www.Somanuals.com. All Manuals Search And Download.
This unit does not recognize the USB
connection correctly.
Video is not output. [BDT330]
¾
Video from the HDMI AV OUT SUB terminal is
not output when the “HDMI(SUB) Output
Mode” is set to “V.OFF”. (> 30)
¾
Disconnect and reconnect the USB cable. If it
still does not recognize the connection, turn
this unit off and on again.
¾
USB devices may not be recognized by this
unit when connected using the following :
– a USB hub
Video is not output in high-definition.
¾
Confirm that “HDMI Resolution” in the Setup
menu is set properly. (> 29)
– a USB extension cable
¾
If you connect USB HDD to this unit, use the
USB cable that is supplied with the HDD.
3D video is not output.
¾
¾
Connect to a full high-definition TV.
Is there a non-3D compatible amplifier/
receiver connected between this unit and a
TV? (> 11)
Picture
¾
[BDT330] : If there is a non-3D compatible
amplifier/receiver connected to the HDMI AV
OUT SUB terminal, set the “HDMI(SUB)
Output Mode” to “V.OFF”. (> 11)
Are the settings on this unit and the TV
correct? (> 21)
Is the amplifier/receiver that is connected
between this unit and TV on?
Depending on the connected TV, the video
being played back might switch to 2D video
due to changes in resolution etc. Check the
3D setting on the TV.
The images from this unit do not appear on
the TV.
Picture is distorted.
¾
¾
¾
¾
An incorrect resolution is selected in “HDMI
Resolution”. Reset the setting as follows:
Turn the unit on.
Press and hold [OK], the blue button and the
yellow button on the remote control at the
same time for more than 5 seconds.
– “00RET” is displayed on the unit’s display.
Press [1] (right) repeatedly on the remote
control until “04PRG” is displayed on the
unit’s display.
Press and hold [OK] for more than 5 seconds.
Set the item again. (> 29)
– When Dolby Digital Plus, Dolby TrueHD,
and DTS-HD audio are not output properly,
select “Yes” in “Restore Default Settings”
and make proper settings. (> 34)
When “3D BD-Video Playback” in the Setup
menu is set to “Auto”, images may not be
output depending on the connection method.
After removing the disc from this unit, select
“Set before play” in the Setup menu, and
select “2D Playback” in the setup screen
displayed when playing 3D discs. (> 31)
[BDT330] : When outputting in 24p (4K),
images may be distorted depending on the
HDMI cable. Use an HDMI cable that
supports 4K output.
1
2
3
4
3D video is not output correctly as 2D.
¾
Select “Set before play” in the Setup menu,
and select “2D Playback” in the setup screen
displayed when playing 3D discs. (> 31, “3D
BD-Video Playback”)
¾
Discs that have recorded titles with Side by
side (2 screen structure) and that can be
enjoyed in 3D are played back in accordance
with the settings of the TV.
¾
¾
No subtitles.
When progressive output is on, closed
captions/subtitles cannot be displayed.
¾
The subtitles overlap closed captions
recorded on discs.
¾
Turn off the subtitles or the closed caption
setting on the TV. (> 27)
A black band is displayed around the edge of
the screen.
The aspect ratio of the screen is abnormal.
¾
Confirm the “TV Aspect” is set properly.
(> 33)
¾
Adjust the aspect setting on the TV.
VQT4V26
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio
Network
Cannot switch audio.
I can’t connect to the network.
¾
The audio cannot switch, if “Digital Audio
Output” is set to “Bitstream”. Set “Digital
Audio Output” to “PCM”. (> 30)
¾
Confirm the network connection and settings.
(> 13, 14, 32)
¾
There may be obstacles that prevent the unit
from detecting your home network. Bring the
unit and the wireless router closer to each
other. This unit may be able to detect your
network name (> 16, “SSID”).
Cannot hear the desired audio type.
¾
Check the connections and the “Digital Audio
Output” settings. (> 11, 30)
¾
Check the operating instructions for each
device and connect accordingly.
¾
[BDT330] : When connecting this unit to a TV
via an HDMI AV OUT MAIN and to an
amplifier/receiver via an HDMI AV OUT SUB,
set “HDMI(SUB) Output Mode” to “V.OFF”.
(> 11)
Cannot play current title.
¾
Confirm the network connection and settings.
¾
To output audio from a device connected with
an HDMI cable, set “HDMI Audio Output” to
“On” in the Setup menu. (> 30)
(> 13, 14, 32)
When using wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback.
There is no sound coming out from the TV.
[BDT330]
¾
Higher transfer rate router such as 802.11n
(2.4 GHz or 5 GHz) wireless router may solve
the problem. If you use 802.11n (2.4 GHz or
5 GHz) wireless router, it is necessary to set
the encryption type to “AES”.
Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in
connection interruptions or other problems.
On the “Wireless Settings” screen (> 32), the
continuous lighting of at least 4 “Reception”
indicators is the target for a stable connection.
If 3 or fewer indicators are lit or the
¾
Audio may not output from the TV when the
amplifier/receiver is connected to the HDMI
AV OUT SUB, and “HDMI(SUB) Output
Mode” (> 30) is set to “V.OFF”. In such a
case, output audio from the amplifier/receiver.
To output audio from the TV, set the
“HDMI(SUB) Output Mode” to “Normal”.
¾
Playback
connection is being interrupted, change the
position or angle of your wireless router and
see if the connection state improves. If there
is no improvement, connect to a wired
network and perform the “Easy Network
Setting” (> 14) again.
Disc cannot be played.
¾
¾
The disc is dirty. (> 5)
The disc is not finalized. (> 7)
Still pictures (JPEG) do not play back
normally.
¾
The images that were edited on the PC, such
as Progressive JPEG, etc., may not be played
back.
I can’t play back BD-Live.
¾
¾
¾
¾
Confirm that this unit is connected to the
broadband Internet. (> 13)
Connect this unit to the network by a wired
connection.
Confirm the “BD-Live Internet Access”
settings. (> 33)
Confirm a USB device is connected to the
USB port. (> 17)
VQT4V26
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
On the unit’s display
Check the following when messages or service
numbers are displayed on the screen or unit’s
display.
NET
While connecting to a network.
¾
No PLAY
On the TV
¾
There is a viewing restriction on a BD-Video
or DVD-Video. (> 33)
The media is dirty or badly scratched. The
unit cannot play.
Cannot play.
¾
¾
You inserted an incompatible disc (Discs
recorded in PAL video, etc.).
REMOVE
The USB device is drawing too much power.
Remove the USB device.
Cannot display on this unit.
¾
¾
You tried to play a non-compatible image.
Confirm “SD” on the unit’s display is not
displayed and re-insert the card.
¾
SET (“ ” stands for a number.)
¾
The remote control and this unit are using
different codes. Change the code on the
remote control.
No disc inserted.
The disc may be upside down.
¾
$ This operation is not available.
Press and hold [OK] and the
indicated number button at
the same time for more than
5 seconds.
¾
Some operations are unsupported by the unit.
(For example, reverse slow motion, etc.)
IP address is not set.
¾
The “IP Address” in “IP Address/DNS
Settings” is “---. ---. ---. ---”. Set the “IP
Address”, “Subnet Mask”, and “Default
Gateway”. (Select the automatic address
acquisition if necessary.)
U59
¾
Temperature of this unit is hot and the unit
switches to standby for safety reasons.
Wait for about 30 minutes.
Select a position with good ventilation when
installing the unit.
The current wireless network security setting
is weak. It is recommended to change to a
stronger security setting.
H or F
(“ ” stands for a number.)
¾
Set a stronger network security level referring
¾
¾
There is something unusual.
to the wireless router operating instructions.
Check the unit using the troubleshooting
guide. If the service number remains
displayed, do the following.
1
2
Disconnect the plug from the AC outlet, wait a
few seconds, then reconnect it.
Press [Í/I] to turn the unit on.
If the service number remains displayed despite
doing the above, request service from the dealer.
Inform the dealer of the service number when
requesting service.
VQT4V26
38
Download from Www.Somanuals.com. All Manuals Search And Download.
START
The system is being restarted during the
¾
firmware update. Please do not turn off the
unit.
UPD/
(“ ” stands for a number.)
¾
The firmware is being updated.
Please do not turn off the unit.
FIN
¾
The firmware update is complete.
VQT4V26
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
File format
General
File format
Extension
Reference
This unit supports ID3
tags, but only titles, artist
names and album names
can be displayed.
Signal system
Operating
NTSC
MP3
“.MP3”, “.mp3”
i5 oC to i35 oC
temperature range (i41 oF to i95 oF)
≥ MOTION JPEG and
Progressive JPEG are
not supported.
≥ You may not be able to
play back the file if you
have edited the folder
structure or the file
name on a PC or other
device.
Operating humidity 10 % to 80 % RH
range
(no condensation)
Optical digital output
(Optical terminal)
Digital audio output
JPEG
“.JPG”, “.jpg”
Output connector:
[BDT330] Type A (19 pin) 2 system
[BDT230] Type A (19 pin) 1 system
HDMI AV output
SD card slot
USB slot
1 system
≥ The video file and
subtitles text file are
inside the same folder,
and the file names are
the same except for the
file extensions.
≥ Some MKV files may
not play back,
depending on the video
resolution and frame
rate condition.
“.MKV”, “.mkv”
USB2.0
1 system
Subtitles text
file
“.SRT”, “.srt”,
“.SSA”, “.ssa”,
“.ASS”, “.ass”
10BASE-T/100BASE-TX
1 system
Ethernet
MKV
Standard Compliance:
IEEE802.11 a/b/g/n
Frequency range:
2.4 GHz/5 GHz band
Wireless LAN
Maximum sampling rate:
192 kHz/24 bit
FLAC
“.FLAC”, “.flac”
“.WAV”, “.wav”
Security:
WPATM/WPA2TM
(Encryption Type: TKIP/AES,
Authentication Type: PSK),
WEP (64 bit/128 bit)
Maximum sampling rate:
192 kHz/24 bit
WAV
MPO
“.MPO”, “.mpo” 3D still picture
This unit supports ID3
Class I LASER Product
Wave length: 785 nm (CDs)/
660 nm (DVDs)/405 nm (BDs)
Laser power: No hazardous
radiation is emitted with the
safety protection
“.M4A”, “.m4a”,
“.AAC”, “.aac”
tags.
AAC
Maximum sampling rate:
48 kHz/320 kbps
LASER
Specification
This unit supports ID3
tags.
Maximum sampling rate:
48 kHz/355 kbps
WMA
“.WMA”, “.wma”
Power supply
AC 120 V, 60 Hz
Approx. 14 W
Power
consumption
≥ With certain recording states and folder structures, the play
order may differ or playback may not be possible.
Power
consumption in
standby mode
Approx. 0.5 W
Power
[BDT330] Approx. 6 W
[BDT230] Approx. 5.5 W
consumption in
quick start standby
mode
[BDT330]
Approx. 430 mmk41 mmk181 mm
Dimensions
(WkHkD)
(Approx. 16 15/16zk1 5/8zk
7 3/16z)
Including the
projecting parts
[BDT230]
Approx. 430 mmk38 mmk179 mm
(Approx. 16 15/16zk1 1/2zk
7 1/16z)
[BDT330] Approx. 1.6 k
g
(3.52 lbs)
(3.08 lbs)
Mass (Weight)
[BDT230] Approx. 1.4 k
g
≥ Specifications are subject to change without notice.
VQT4V26
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio information
Supported format for DLNA
The audio output differs depending on which
terminals are connected to the amplifier/receiver,
and the settings on the unit. (> 30, “Digital Audio
Output”)
≥ File formats that are not supported by your
DLNA server cannot be played.
Video
≥ The number of channels listed is the maximum possible
number of output channels when connected to amplifier/
receiver compatible with the respective audio format.
Video
codec
H.264
H.264
Audio
codec
Dolby Digital
AAC
Dolby Digital
Linear PCM .mpeg
Example of
file extension
.mts
Container
AVCHD
MP4
“Digital Audio Output”
Terminal
.mp4
.mpg
“Bitstream”
“PCM”
PS
TS
MPEG2
BD-Video :
HDMI AV Outputs using 7.1ch PCM*1*2*3
MPEG2
H.264
AAC
Dolby Digital
.m2ts
.ts
OUT
original audio*1 DVD-Video :
5.1ch PCM*3
Output
channel
Photo
Dolby Digital/
Down-mixed
OPTICAL DTS Digital
Format
JPEG
Example of file extension
.jpg
2ch PCM
Surround
*1
When “BD-Video Secondary Audio” is set to “On”, the
audio will be output as Dolby Digital, DTS Digital Surround
or 5.1ch PCM.
Audio
Audio codec
MP3
Example of file extension
*2
*3
[BDT230] :The maximum possible number of Dolby sound is
5.1ch PCM.
When “DTS Neo:6” is set to “Cinema” or “Music”, 2ch
(2.1ch) audio can be expanded to 7ch (7.1ch) and output.
.mp3
.flac
.m4a
.wma
—
FLAC
AAC
WMA
Linear PCM
VQT4V26
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Display languages list
Language code list
Language Code Language Code Language Code
Display Language Display Language Display Language
Abkhazian:
Afar:
Afrikaans:
Albanian:
Amharic:
Arabic:
Armenian:
Assamese:
Aymara:
6566 Gujarati:
6565 Hausa:
6570 Hebrew:
8381 Hindi:
6577 Hungarian:
6582 Icelandic:
7289 Indonesian: 7378 Scots Gaelic: 7168
6583 Interlingua:
6589 Irish:
7185 Rhaeto-Romance:
ENG
FRA
DEU
ITA
ESP
NLD
SVE
NOR
DAN
POR
RUS
English JPN
French CHI
German KOR
Italian MAL
Spanish VIE
Dutch THA
Swedish POL
Norwegian CES
Danish SLK
Japanese ARA
Chinese HIN
Korean PER
Malay IND
Vietnamese MRI
Thai BUL
Polish RUM
Czech GRE
Slovak TUR
Hungarian
Arabic
Hindi
Persian
Indonesian
Maori
Bulgarian
Romanian
Greek
Turkish
Others
7265
8277
8279
8285
8377
8365
7387 Romanian:
7273 Russian:
7285 Samoan:
7383 Sanskrit:
7365 Serbian:
8382
7165 Serbo-Croatian:8372
Portuguese HUN
Russian FIN
Azerbaijani: 6590 Italian:
Bashkir:
Basque:
7384 Shona:
7465 Sindhi:
8378
8368
Finnish
6665 Japanese:
6985 Javanese:
7487 Singhalese: 8373
Bengali; Bangla:
Kannada:
Kashmiri:
7578 Slovak:
7583 Slovenian:
7575 Somali:
7589 Spanish:
8375
8376
8379
6983
6678
Bhutani:
Bihari:
Breton:
Bulgarian:
Burmese:
6890 Kazakh:
6672 Kirghiz:
6682 Korean:
6671 Kurdish:
7789 Laotian:
7579 Sundanese: 8385
7585 Swahili:
7679 Swedish:
7665 Tagalog:
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
Byelorussian: 6669 Latin:
Cambodian: 7577 Latvian, Lettish: 7686 Tajik:
Catalan:
Chinese:
Corsican:
Croatian:
Czech:
6765 Lingala:
9072 Lithuanian:
6779 Macedonian: 7775 Telugu:
7282 Malagasy:
6783 Malay:
7678 Tamil:
7684 Tatar:
7771 Thai:
7783 Tibetan:
Danish:
Dutch:
6865 Malayalam: 7776 Tigrinya:
7876 Maltese:
6978 Maori:
6979 Marathi:
6984 Moldavian:
7079 Mongolian:
7074 Nauru:
7784 Tonga:
7773 Turkish:
7782 Turkmen:
7779 Twi:
7778 Ukrainian:
7865 Urdu:
English:
Esperanto:
Estonian:
Faroese:
Fiji:
Finnish:
French:
Frisian:
Galician:
Georgian:
German:
Greek:
7073 Nepali:
7082 Norwegian: 7879 Vietnamese: 8673
7089 Oriya:
7176 Pashto, Pushto:8083 Welsh:
7565 Persian:
6869 Polish:
7869 Uzbek:
7982 Volapük:
8679
6789
8779
8872
7473
8979
9085
7065 Wolof:
8076 Xhosa:
6976 Portuguese: 8084 Yiddish:
Greenlandic: 7576 Punjabi:
Guarani: 7178 Quechua:
8065 Yoruba:
8185 Zulu:
VQT4V26
42
Download from Www.Somanuals.com. All Manuals Search And Download.
This product incorporates the following software:
“AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/
Progressive” are trademarks of Panasonic Corporation and
Sony Corporation.
(1) the software developed independently by or for Panasonic
Corporation,
(2) the software owned by third party and licensed to Panasonic
Corporation,
Java is a registered trademark of Oracle and/or its affiliates.
(3) the software licensed under the GNU General Public License,
Version 2.0 (GPL V2.0),
(4) the software licensed under the GNU LESSER General Public
License, Version 2.1 (LGPL V2.1), and/or
(5) open source software other than the software licensed under
the GPL V2.0 and/or LGPL V2.1.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license under U.S. Patent Nos: 5,956,674;
5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929;
7,392,195; 7,272,567 & other U.S. and worldwide patents issued &
pending.
DTS-HD, the Symbol, & DTS-HD and the Symbol together are
registered trademarks & DTS-HD Master Audio is a trademark of
DTS, Inc. Product includes software.
The software categorized as (3) - (5) are distributed in the hope
that it will be useful, but WITHOUT ANY WARRANTY, without
even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Please refer to the detailed
terms and conditions thereof shown in the Player Settings menu.
© DTS, Inc. All Rights Reserved.
At least three (3) years from delivery of this product, Panasonic will
give to any third party who contacts us at the contact information
provided below, for a charge no more than our cost of physically
performing source code distribution, a complete machine-readable
copy of the corresponding source code covered under GPL V2.0,
LGPL V2.1 or the other licenses with the obligation to do so, as
well as the respective copyright notice thereof.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
This product is licensed under the AVC patent portfolio license and
VC-1 patent portfolio license for the personal and non-commercial
use of a consumer to (i) encode video in compliance with the AVC
Standard and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii)
decode AVC/VC-1 Video that was encoded by a consumer
engaged in a personal and non-commercial activity and/or was
obtained from a video provider licensed to provide AVC/VC-1
Video. No license is granted or shall be implied for any other use.
Additional information may be obtained from MPEG LA, LLC.
Contact Information: [email protected]
The source code and the copyright notice are also available for
free in our website below.
Adobe Flash Lite for Digital Home Software licensed by Adobe
Systems Incorporated or its affiliates.
For Adobe Flash Lite for Digital Home Software (“Flash Software”),
please be aware of the following.
VIERA Connect is a trademark of Panasonic Corporation.
(i) You are not permitted to distribute and copy this Flash
Software to any third party,
(ii) You are not permitted to modify the Flash Software and create
derivative works of the Flash Software,
(iii) You are not permitted to decompile, reverse engineer,
disassemble and otherwise reduce the Flash Software to a
human-perceivable form,
(iv) You are not permitted to claim any damages, including direct,
indirect, special, incidental, punitive, and consequential
damages arising out of or in connection with the Flash
Software,
(v) You fully agree that the ownership of the Flash Software is that
of Panasonic Corporation and/or its suppliers or licensors,
(vi) You agree and acknowledge that it is possible that you cannot
access the contents unless you do not obtain and install the
latest version of the Flash Software.
MPEG Layer-3 audio coding technology licensed from Fraunhofer
IIS and Thomson.
SDXC Logo is a trademark of SD-3C, LLC.
“DVD Logo” is a trademark of DVD Format/Logo Licensing
Corporation.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi
Alliance.
The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
“Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct”, “Miracast”, “WPA”
and “WPA2” are marks or registered marks of the Wi-Fi Alliance.
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks,
service marks, or certification marks of the Digital Living Network
Alliance.
Windows is a trademark or a registered trademark of Microsoft
Corporation in the United States and other countries.
Android is a trademark of Google Inc.
VQT4V26
43
Download from Www.Somanuals.com. All Manuals Search And Download.
(1) MS/WMA
This product is protected by certain intellectual property rights of
Microsoft Corporation and third parties. Use or distribution of such
technology outside of this product is prohibited without a license
from Microsoft or an authorized Microsoft subsidiary and third
parties.
(2) MS/PlayReady/Final Product Labeling
This product contains technology subject to certain intellectual
property rights of Microsoft. Use or distribution of this technology
outside of this product is prohibited without the appropriate
license(s) from Microsoft.
(3) MS/PlayReady/End User Notices
Content owners use Microsoft PlayReadyTM content access
technology to protect their intellectual property, including
copyrighted content. This device uses PlayReady technology to
access PlayReady-protected content and/or WMDRM-protected
content. If the device fails to properly enforce restrictions on
content usage, content owners may require Microsoft to revoke the
device’s ability to consume PlayReady-protected content.
Revocation should not affect unprotected content or content
protected by other content access technologies. Content owners
may require you to upgrade PlayReady to access their content. If
you decline an upgrade, you will not be able to access content that
requires the upgrade.
(4) FLAC, WPA Supplicant
The software licenses are displayed when “License” in the Setup
menu is selected. (> 34)
Copyright 2004-2010 Verance Corporation. CinaviaTM is a Verance
Corporation trademark. Protected by U.S. Patent 7,369,677 and
worldwide patents issued and pending under license from Verance
Corporation. All rights reserved.
VQT4V26
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Products Limited Warranty
Limited Warranty Coverage (For USA and Puerto Rico Only)
If your product does not work properly because of a defect in materials or
workmanship, Panasonic Consumer Marketing Company of North America
(referred to as “the warrantor”) will, for the length of the period indicated on the
chart below, which starts with the date of original purchase (“warranty period”),
at its option either (a) repair your product with new or refurbished parts, (b)
replace it with a new or a refurbished equivalent value product, or (c) refund
your purchase price. The decision to repair, replace or refund will be made by
the warrantor.
commercial use such as hotel, office, restaurant, or other business or rental use
of the product, or service by anyone other than a Factory Service Center or
other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER
“LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.
(As examples, this excludes damages for lost time, travel to and from the
servicer, loss of or damage to media or images, data or other memory or
recorded content. The items listed are not exclusive, but for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY
OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED
WARRANTY.
Product or Part Name
Parts
Labor
Blu-ray Disc Player
1 Year
90 Days
All included Accessories
(Except Non-Rechargeable Batteries)
90 Days
10 Days
Not Applicable
Not Applicable
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty lasts, so
the exclusions may not apply to you.
Only Non-Rechargeable Batteries
During the “Labor” warranty period there will be no charge for labor. During the
“Parts” warranty period, there will be no charge for parts. This Limited Warranty
excludes both parts and labor for non-rechargeable batteries, antennas, and
cosmetic parts (cabinet). This warranty only applies to products purchased and
serviced in the United States or Puerto Rico. This warranty is extended only to
the original purchaser of a new product which was not sold “as is”.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state. If a problem with this product develops during or
after the warranty period, you may contact your dealer or Service Center. If the
problem is not handled to your satisfaction, then write to the warrantor’s
Consumer Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED
WARRANTY, ARE YOUR RESPONSIBILITY.
Mail-In Service
For assistance in the U.S.A. and Puerto Rico in obtaining repairs, please ship
the product prepaid to:
Panasonic Exchange Center
Customer Services Directory (United States and Puerto Rico)
4900 George McVay Drive
Suite B
Obtain Product Information and Operating Assistance; locate your
nearest Dealer or Service Center; purchase
Parts and Accessories; or make Customer Service and
Literature requests by visiting our Web Site at:
or, contact us via the web at:
You may also contact us directly at:
McAllen, TX 78503
Online Repair Request
To submit a new repair request and for quick repair status visit our Web Site at
When shipping the unit, carefully pack, include all supplied accessories listed in
the Owner’s Manual, and send it prepaid, adequately insured and packed well in
a carton box. When shipping Lithium Ion batteries please visit our Web Site at
the most up to date information. Include a letter detailing the complaint, a return
address and provide a daytime phone number where you can be reached. A
valid registered receipt is required under the Limited Warranty.
1-800-211-PANA (7262)
Monday-Friday 9am-9pm,
Saturday-Sunday 10am-7pm EST
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Accessory Purchases (United States and Puerto Rico)
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/
PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID
AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE
REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF
PURCHASE.
Purchase Parts, Accessories and Instruction Books online for all Panasonic
Products by visiting our Web Site at:
Or, send your request by E-mail to:
Limited Warranty Limits And Exclusions
You may also contact us directly at:
This warranty ONLY COVERS failures due to defects in materials or
workmanship, and DOES NOT COVER normal wear and tear or cosmetic
damage. The warranty ALSO DOES NOT COVER damages which occurred in
shipment, or failures which are caused by products not supplied by the
warrantor, or failures which result from accidents, misuse, abuse, neglect,
mishandling, misapplication, alteration, faulty installation, set-up adjustments,
misadjustment of consumer controls, improper maintenance, power line surge,
lightning damage, modification, introduction of sand, humidity or liquids,
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic National Parts Center
20421 84th Ave S., Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
As of October 2012
User memo:
DATE OF PURCHASE
DEALER NAME
The model number and serial number of this product can be
found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.
DEALER ADDRESS
TELEPHONE NUMBER
MODEL NUMBER
SERIAL NUMBER
VQT4V26
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty (Only for CANADA)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT - LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use
and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product
with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your
purchase price. The decision to repair, replace or refund will be made by Panasonic Canada Inc.
Technics Audio Product - One (1) year, parts and labour
Panasonic BD/DVD Product - One (1) year, parts and labour
Panasonic Audio Receivers - One (1) year, parts and labour
Home Theater Systems Product - One (1) year, parts and labour
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic
brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in
Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original
packaging.
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR
OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS
REQUIRED
LIMITATIONS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal
wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or
failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents,
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment
of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand,
humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or
service by anyone other than an Authorized Servicer, or damage that is attributable to acts of God.
Dry cell batteries are also excluded from coverage under this warranty.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time,
travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded
content. This list of items is not exhaustive, but for illustration only.)
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages,
or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty
gives you specific legal rights and you may have other rights which vary depending on your province or territory.
WARRANTY SERVICE
For product operation and information assistance, please contact:
PRODUCT OPERATION ASSISTANCE
Customer Care Centre:
Telephone #: 1-800-561-5505
Fax #: (905) 238-2360
PRODUCT REPAIRS
Please locate your nearest Authorized Servicentre.
Link: “Support # Panasonic Servicentre® locator” on www.panasonic.ca
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.
VQT4V26
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Referencia rápida en español
Reproducción básica
(Spanish Quick Reference)
Preparación
Encienda el televisor y seleccione la entrada de
vídeo adecuada en el televisor.
Conexiones básicas
Conexión a un televisor
compatible con HDMI
1 Pulse [Í] para encender la unidad.
Después de conectar su nuevo reprodutor y
pulsar el botón de encendido, aparecerá la
pantalla de la configuración básica.
[BDT330]
2 Inserte el medio.
Cable HDMI
HDMI IN
Inicia la reproducción
Pulse [1PLAY].
Parada
[BDT230]
Pulse [∫STOP].
La posición de detención se memoriza.
Conexión a un televisor
compatible con HDMI y a un
amplificador/receptor
compatible con HDMI
Función de reanudación de la reproducción
Pulse
[1PLAY] para reiniciar la reproducción
desde esta posición.
≥ La posición se borra si se abre la bandeja.
≥ En los discos BD-Video incluidos los BD-J, la función
de reanudación de la reproducción no funciona.
Cable HDMI
[BDT330]
HDMI IN
(ARC)
Pausa
Pulse [;PAUSE].
≥ Pulse [;PAUSE] otra vez o [1PLAY] para reiniciar la
reproducción.
Búsqueda/Cámara lenta
HDMI OUT
HDMI IN
(ARC)
Búsqueda
[BDT230]
Durante la reproducción, pulse [SEARCH6]
o [SEARCH5].
Amplificador/Receptor
Cámara lenta
Durante la pausa, pulse [SEARCH5].
Conecte el cable de
La velocidad aumenta hasta 5 pasos.
alimentación de CA por
último
≥ Música y MP3, etc.: La velocidad está fija en un paso.
≥ Pulse [1PLAY] para recuperar la velocidad de
reproducción normal.
A una toma de corriente doméstica
Salto
Durante la reproducción o la pausa, pulse
[:] o [9].
Salta hasta el título, capítulo o pista que desee
reproducir.
Cable de alimentación de CA (incluido)
≥ Conéctelo cuando haya realizado el resto de conexiones.
Ahorro de energía
Esta unidad consume una pequeña cantidad de energía
aunque esté ajustada en el modo de espera (Accionamiento
rápido : Desactivado, aprox. 0,5 W). Para ahorrar energía
cuando no vaya a utilizar la unidad durante mucho tiempo,
desenchúfela de la toma de corriente.
VQT4V26
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Changing audio . . . . . .20
Language . . . . . . . .31, 42
B BD-Live . . . . . . . . . . . . . .22
A Audio
V VIERA Connect . . . . . . 23
W Wireless LAN . . . . . . . . 13
M Media Renderer . . . . . . 25
Miracast . . . . . . . . . . . . . 24
Multi User Mode. . . . . . . 19
24p . . . . . . . . . . . . 28, 29, 30
N Network
D DLNA . . . . . . . . . . . . . . . .24
F File format. . . . . . . . . . . .40
Firmware update . . . . . . . 16
H HDMI CEC . . . . . . . . . . . .26
L LAN . . . . . . . . . . . . . . . . .13
Connection . . . . . . . . . 13
Setting . . . . . . . . . 14, 32
P
Pop-up menu . . . . . . . . . .21
Q Quick Start . . . . . . . . . . 34
R Restore Default
Language
Settings . . . . . . . . . . . . . 34
Audio . . . . . . . . . . . . . .31
Menu . . . . . . . . . . . . . .31
On-screen. . . . . . . . . . .31
Soundtrack . . . . . . . . . .27
Subtitle . . . . . . . . . .27, 31
Resume play function . . .20
S Subtitle . . . . . . . . . . . . . 27
U USB device . . . . . . . . . . . 7
USA Only: Disposal may be regulated in your community due to environmental considerations. For
disposal or recycling information, please visit Panasonic website:
or call 1-888-769-0149.
As an ENERGY STAR® Partner, Panasonic
has determined that this product meets the
ENERGY STAR® guidelines for energy
efficiency.
For Canada only: The word “Participant” is
used in place of the word “Partner”.
Panasonic Consumer Marketing
Company of North America,
Panasonic Canada Inc.
pr
5770 Ambler Drive,
Division of Panasonic Corporation Mississauga, Ontario,
of North America
L4W 2T3
One Panasonic Way, Secaucus, New
Jersey 07094
VQT4V26
F1212SA0
C Panasonic Corporation 2012
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|