Operating Instructions
Blu-ray Disc Player
Model No. DMP-BD80
DMP-BD60
The illustration shows the image of DMP-BD80.
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.
Region management information
For Australia and New Zealand
BD-Video:
This unit plays BD-Video
marked with labels
containing the region code B.
Example:
Example:
Example:
Example:
DVD-Video:
This unit plays DVD-Video
marked with labels containing the
region number “4” or “ALL”.
2
3
4
ALL
4
For Middle East
BD-Video:
This unit plays BD-Video
marked with labels
containing the region code B.
Example:
DVD-Video:
This unit plays DVD-Video
marked with labels containing the
region number “2” or “ALL”.
2
3
2
ALL
5
For Asia
BD-Video:
DVD-Video:
Example:
This unit plays BD-Video
marked with labels
containing the region code A.
This unit plays DVD-Video
marked with labels containing the
region number “3” or “ALL”.
2
3
3
ALL
4
RQT9407-1L
GN GZ GC GA
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety precautions Unit and media care
Disc and card handling
Placement
Set the unit up on an even surface away from direct sunlight, high
temperatures, high humidity, and excessive vibration. These
conditions can damage the cabinet and other components, thereby
shortening the unit’s service life. Do not place heavy items on the unit.
Clean discs
DO NOT
DO
Voltage
Wipe with a damp cloth and then wipe dry.
Do not use high voltage power sources. This can overload the unit and
cause a fire. Do not use a DC power source. Check the source carefully
when setting the unit up on a ship or other place where DC is used.
Disc and card handling precautions
≥Handle discs by the edges to avoid inadvertent scratches or
fingerprints on the disc.
≥Do not attach labels or stickers to discs (This may cause disc
warping, rendering it unusable).
≥Do not write on the label side with a ball-point pen or other writing
instrument.
≥Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
≥Do not use scratch-proof protectors or covers.
≥Clean any dust, water, or foreign matter from the terminals on the
rear side of the card.
AC mains lead protection
Ensure the AC mains lead is connected correctly and not damaged.
Poor connection and lead damage can cause fire or electric shock.
Do not pull, bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC
mains lead can cause electric shock. Do not handle the plug with
wet hands. This can cause electric shock.
≥Do not use the following discs:
–Discs with exposed adhesive from removed stickers or labels
(rented discs etc).
Foreign matter
Do not let metal objects fall inside the unit. This can cause electric
shock or malfunction.
–Discs that are badly warped or cracked.
–Irregularly shaped discs, such as heart shapes.
Do not let liquids get into the unit. This can cause electric shock or
malfunction. If this occurs, immediately disconnect the unit from the
power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain
flammable gases which can ignite if sprayed into the unit.
Maintenance
Clean this unit with a soft, dry cloth
≥Never use alcohol, paint thinner or benzine to clean this unit.
≥Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
Service
Do not attempt to repair this unit by yourself. If sound is interrupted,
indicators fail to light, smoke appears, or any other problem that is
not covered in these instructions occurs, disconnect the AC mains
lead and contact your dealer or an authorized service center. Electric
shock or damage to the unit can occur if the unit is repaired,
disassembled or reconstructed by unqualified persons.
Observe the following points to ensure continued
listening and viewing pleasure.
Dust and dirt may adhere to the unit’s lens over time, making it
impossible to play discs.
Use the lens cleaner (not included) about once every year,
depending on frequency of use and the operating environment.
Carefully read the lens cleaner’s instructions before use.
Extend operating life by disconnecting the unit from the power
source if it is not to be used for a long time.
Lens cleaner: RP-CL720E
≥This lens cleaner may not be for sale depending on the region.
≥This lens cleaner is sold as specific for DIGA, but can be used
without problem on this unit as well.
To dispose or transfer this unit
This unit may record information of your operating procedures. If you
discard this unit either by disposal or transfer, then follow the
procedures to return all the settings to the factory presets to delete
the recorded information. (> 38, “To return to the factory preset”)
≥When BD-Video is played back, the operation history may be
recorded in the memory of this unit. The recorded contents differ
depending on the disc.
RQT9407
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Changing settings with the on-screen
menu..........................................................26
Linked operations with the TV (VIERA Link
“HDAVI ControlTM”)...................................28
Getting started
Safety precautions..................................... 3
Unit and media care................................... 3
Accessory information.............................. 5
Using the remote control .......................... 5
Media (Disc, card and USB device)
Settings
Changing the unit’s settings...................29
information ................................................. 6
Connection ................................................. 8
Control reference guide .......................... 11
Easy Setting ............................................. 12
Setting the television and amplifier/
receiver operation.................................... 12
Network connection................................. 13
Firmware updating................................... 13
Network settings...................................... 14
Reference
About MP3/JPEG/DivX files.....................34
Messages..................................................36
Troubleshooting guide.............................38
Glossary....................................................42
Specifications...........................................43
Index...........................................Back cover
About descriptions in these operating instructions
≥These operating instructions are applicable to models
DMP-BD80 and DMP-BD60. Unless otherwise indicated,
illustrations in these operating instructions are of DMP-BD80.
[BD80] : indicates features applicable to DMP-BD80 only.
[BD60] : indicates features applicable to DMP-BD60 only.
Playback
Basic operation........................................ 16
Chapter playback..................................... 18
Playing HD Video or SD Video................ 18
Enjoying BD-LIVE or BONUSVIEW in
BD-Video................................................... 19
Enjoying High Bit rate Audio and Video
................................................................... 20
Playing music........................................... 21
Playing still pictures................................ 22
Playing DivX® videos ............................... 24
Enjoying VIERA CASTTM .......................... 25
Showing FUNCTIONS menu ................... 25
Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and
other countries.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567;
7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending.
DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio | Essential are trademarks of DTS, Inc.
© 1996-2008 DTS, Inc. All Rights Reserved.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this
copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
This product is licensed under the AVC patent portfolio license and VC-1 patent portfolio license for the personal and non-commercial use of a
consumer to (i) encode video in compliance with the AVC Standard and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 Video
that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to
provide AVC/VC-1 Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA,
HDAVI Control™ is a trademark of Panasonic Corporation.
“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation.
SDHC Logo is a trademark.
Portions of this product are protected under copyright law and are provided under license by ARIS/SOLANA/4C.
x.v.ColourTM is a trademark.
VIERA CASTTM is a trademark of Panasonic Corporation.
Plays DivX® video
DivX® is a registered trademark of DivX, Inc., and is used under license.
“Blu-ray Disc” is trademark.
“BD-LIVE” logo is trademark of Blu-ray Disc Association.
“BONUSVIEW” is trademark of Blu-ray Disc Association.
YouTube and Picasa are trademarks of Google, Inc.
RQT9407
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessory information
Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts.
(Product numbers correct as of February 2009. These may be subject to change.)
∏
∏
∏
1
Remote control
(N2QAYB000380)
1
Audio/Video cable
2
Batteries
for remote control
∏
∏
∏
For Saudi Arabia
For Thailand
[For[Australia[and[New[Zealand]
AC mains lead
[For]Middle]East]
AC mains lead
[For[Asia]
2 AC mains lead
1
2
For use with this unit only. Do not use it with other equipment. Also, do not use cords for other equipment with this unit.
Using the remote control
Batteries
Use
Insert so the poles (i and j) match those in the remote control.
Remote control signal sensor
When closing the lid, insert it from the j (minus) side.
20˚
20˚
30˚
30˚
7 m directly in front of the unit
R6/LR6, AA
≥Use alkaline or manganese batteries.
≥Do not mix old and new batteries.
≥Do not use different types at the same time.
≥Do not heat or expose to flame.
If you cannot operate the unit or other equipment using the remote
control after changing the batteries, please re-enter the codes
(> 12, 41).
≥Do not leave the battery(ies) in an automobile exposed to direct
sunlight for a long period of time with doors and windows closed.
≥Do not take apart or short circuit.
≥Do not attempt to recharge alkaline or manganese batteries.
≥Do not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
Remove batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
RQT9407
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Media (Disc, card and USB device)
information
Packaged discs
This chart shows the different type of retail/commercial discs you can use, and also includes the industry-standard logos that should appear on
the discs and/or packaging.
Type of media/
Logo
Type of media/
Logo
Features
Indicated as
Features
Indicated as
High Definition (HD)
movie and music discs
[BD-V]
High quality movie and
music discs
[DVD-V]
BD-Video
DVD-Video
≥
Discs supporting
BD-Live (BD-ROM
Profile 2) that allows
interactive functions to
be used when this unit is
connected to the Internet
in addition to the
BONUSVIEW function.
Compact Discs (CD’s)
that contain audio and
music
[CD]
CD
≥Operation and sound
quality of CDs that do
not conform to CD-DA
specifications (copy
control CDs, etc.)
≥Discs supporting
BONUSVIEW
(BD-ROM Profile 1
version 1.1/Final
Standard Profile) that
allows
cannot be guaranteed.
Picture-in-Picture
functions to be used.
Recorded discs
This chart shows the different type of discs recorded with other devices that you can use.
This mark means you must finalize the disc with the DVD recorder, etc. before playback. For details about finalizing, refer to
the operating instructions for your equipment.
Finalized
Type of media/
Formats
Type of media/
Logo
Indicated as
Formats
Indicated as
Logo
≥Version 3 of the BD-RE
Recording Format
≥JPEG format
[BD-V]
≥DVD-Video Format
≥Version 1.2 of the DVD
Video Recording
Format
≥MP3 format
≥JPEG format
[DVD-V]
[DVD-VR]
BD-RE
DVD-R DL
Finalized
[JPEG]
[BD-V]
[MP3]
[JPEG]
[AVCHD]
[DivX]
≥AVCHD format
≥[BD80]: DivX format
≥Version 2 of the BD-R
Recording Format
BD-R
≥+VR (+R/+RW Video
Recording) Format
≥AVCHD format
[DVD-V]
rR/rRW/
rR DL
Finalized
CD-R/RW
Finalized
≥Version 1.1 of the DVD
Video Recording
Format
≥JPEG format
≥AVCHD format
[DVD-VR]
[AVCHD]
DVD-RAM
≥CD-DA format
≥MP3 format
≥JPEG format
[CD]
[MP3]
[JPEG]
[DivX]
[JPEG]
[AVCHD]
≥[BD80]: DivX format
≥DVD-Video Format
≥Version 1.1 of the DVD
Video Recording
Format
[DVD-V]
[DVD-VR]
≥It may not be possible to play the above discs in some cases
due to the type of discs, the condition of the recording, the
recording method and how the files were created.
≥When a disc recorded in the AVCHD format is being played, the
video may be paused for a few seconds at portions spliced, due
to deletion or editing.
DVD-R/RW
Finalized
≥MP3 format (DVD-RW
is not supported)
≥JPEG format (DVD-RW
is not supported)
≥AVCHD format
≥[BD80]: DivX format
(DVD-RW is not
[MP3]
[JPEG]
■About playback compatibility for BD-R and BD-RE
with high definition recordings of high definition
broadcasts
With DMP-BD60/80 purchased in the below countries, it is possible
to playback discs with recordings of the high definition broadcasts
listed to the right which were recorded with Panasonic Blu-ray Disc
recorders.
[AVCHD]
[DivX]
supported)
As high definition broadcasts are a new technology, areas
confirmed as of March 2009 are as below.
Country
Australia
Digital Broadcast
Digital Terrestrial Broadcasting for
Australia (DVB-T)
(Compatible models DMP-BD60GN, DMP-BD80GN)
New Zealand
Digital Terrestrial Broadcasting for
New Zealand (DVB-T)
RQT9407
(Compatible models DMP-BD60GZ, DMP-BD80GN)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SD cards
This chart shows the different type of cards recorded with other devices that you can use.
≥Useable memory is slightly less than the card capacity.
≥If the SD card is formatted on a PC, you may not be able to use it
on this unit.
≥We recommend using a Panasonic SD card.
Please confirm the latest information on the following website.
(This site is in English only.)
≥Keep the Memory Card out of reach of children to prevent
swallowing.
≥When a card recorded in the AVCHD format is being played, the
video may be paused for a few seconds at portions spliced, due to
deletion or edition.
≥Switch the write-protect switch to the “LOCK” position to protect
the content from accidental erasure.
Type of media
SD Memory Card§
(from 8 MB to 2 GB)
SDHC Memory Card
(from 4 GB to 32 GB)
§ Including miniSD Card and microSD Card
In these operating instructions, the cards shown in the table
(ꢀabove) are comprehensively called SD cards.
Formats
Indicated as
≥JPEG format
≥AVCHD format
≥MPEG2 format
[JPEG]
[AVCHD]
[MPEG2]
≥A miniSD Card and a microSD Card must be used with
the attached adaptor that comes with the card.
≥When using from 4 GB to 32 GB SD cards, only SD
cards that display the SDHC logo can be used.
ADAPTER
≥This unit is compatible with SD Memory Cards that meet
SD Card Specifications FAT12 and FAT16 formats, as
well as SDHC Memory Cards in FAT32 format.
USB device
This unit can playback pictures by connecting the USB memory recorded with a PC or similar in following formats, and Panasonic digital cameras
connected via USB cable.
File system
Type of media
Formats
Indicated as
≥FAT12, FAT16 and FAT32 file systems are supported.
≥UDF/NTFS/exFAT file system is not supported.
≥Depending on the sector size, some files may not work.
≥Only the first partition on USB devices with multi-partition is
supported.
Despite meeting the conditions mentioned above, there may be USB
device that cannot be used with this unit.
≥MP3 format
≥JPEG format
≥[BD80]: DivX
format
[MP3]
[JPEG]
[DivX]
USB device
Compatible USB devices
≥USB devices which are defined as USB mass storage class.
– USB devices that support USB 1.0/1.1 and USB 2.0 Full Speed/
High Speed.
This unit does not support USB device charging.
≥USB devices of up to 128 GB can be used.
≥USB devices that support bulk only transfer.
CBI (Control/Bulk/Interrupt) is not supported.
≥Digital Cameras which require additional programme installation
when connected to a PC are not supported.
≥MTP (Media Transport Protocol) device is not supported.
≥A multi-port USB card reader is not supported.
Discs that cannot be played
≥BD-RE with the cartridge
≥2.6 GB and 5.2 GB DVD-RAM
≥DVD-Audio
≥Video CD and SVCD
≥WMA discs
≥[BD60]: DivX discs
≥HD DVD
≥Other discs that are not specifically supported
≥3.95 GB and 4.7 GB DVD-R for Authoring
≥DVD-RAM that cannot be removed from their cartridges
≥Version 1.0 of DVD-RW
≥DVD-ROM, CD-ROM, CDV, SACD, Photo CD, MV-Disc and PD
RQT9407
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection
≥Do not place the unit on amplifiers/receiver or equipment that may become hot. The heat can damage the unit.
≥Do not connect through the video cassette recorder. Due to copy guard protection, the picture may not be displayed properly.
≥Turn off all equipment before connection and read the appropriate operating instructions.
≥Non-HDMI-compliant cables cannot be utilized.
≥Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover). It is recommended that you use Panasonic’s
HDMI cable.
Recommended part number:
RP-CDHG10 (1.0 m), RP-CDHG15 (1.5 m), RP-CDHG20 (2.0 m), RP-CDHG30 (3.0 m), RP-CDHG50 (5.0 m), etc.
≥This unit incorporates HDMI (Deep Colour, x.v.ColourTM, High Bit rate Audio) technology. (ꢁ42, 43)
≥When outputting 1080p signal, please use HDMI cables 5.0 meters or less.
Connecting to a television
The image quality improves in a sequence of connections C, B, A, given below.
A Connecting to HDMI AV OUT terminal
You can enjoy high quality, digital video and audio.
NECESSARY SETTINGS
≥“HDMI Video Mode” and “HDMI Audio
Output”: “On” (ꢁ31)
HDMI cable
HDMI IN
HDMI
compatible
television
NOTE
TIPS
To enjoy a richer sound
≥Use connections D, E, F or G (ꢁ9–10)
additionally.
In case of the connection E, F or G, set
“HDMI Audio Output” to “Off” (ꢁ31)
With this connection, you can use VIERA
Link “HDAVI Control” (ꢁ28).
Back of the unit
HDMI AV OUT
B Connecting to COMPONENT VIDEO OUT terminal
You can enjoy high definition images by connecting to a component video terminals that supports 720p (750p) and 1080i (1125i) signals.
NECESSARY SETTINGS
≥[BD80] “Analog Audio Output”: “2ch
(Downmix) + 5.1ch” (ꢁ31)
≥[BD80] Set “High Clarity Sound” on the
on-screen menu to “Off” (ꢁ27).
(Otherwise, the video will not be output.)
Television
AUDIO IN
COMPONENT
VIDEO IN
NOTE
R
L
≥Connect terminals of the same color.
≥Unplug the yellow plug of Audio/Video
cable.
≥The video output resolution is restricted to
“576p/480p” when DVD-Video discs, DivX
([BD80]) and BD-Video discs recorded at a
rate of 50 field per second are output from
the COMPONENT VIDEO OUT terminals.
Component
Video cable
Audio/Video cable
(included)
Back of the unit
To enjoy a richer sound
≥Use connections D, E, F or G (ꢁ9–10)
additionally.
TIPS
(Unplug the red and white plugs.)
To enjoy high definition/progressive
video
≥Connect to a television that supports 576p/
480p or higher.
≥Set “Component Resolution” to “576p/
480p”, “720p” or “1080i”. (ꢁ31)
≥If this unit is connected to an amplifier/
receiver, etc. via an HDMI cable with
“HDMI Video Mode” to “On” (ꢁ31), the
video will be fixed to 576i/480i.
RQT9407
8
Download from Www.Somanuals.com. All Manuals Search And Download.
C Connecting to VIDEO OUT terminal
AUDIO IN
NECESSARY SETTINGS
≥[BD80] “Analog Audio Output”: “2ch
Television
AUDIO/VIDEO IN
R
L
VIDEO IN
(Downmix) + 5.1ch” (ꢁ31)
NOTE
≥[BD80] Set “High Clarity Sound” on the
on-screen menu to “Off” (ꢁ27).
(Otherwise, the video will not be output.)
Audio/Video cable
(included)
≥Connect terminals of the same color.
≥High definition video cannot be output with
this connection.
Use connection A or B (ꢁ8) for high
definition video.
Back of the unit
VIDEO OUT
§ With audio cables, connect the AUDIO
OUT terminals to the two-channel audio
input terminals of an analog amplifier/
receiver or system component in place of a
television to enjoy stereo sound.
TIPS
2ch AUDIO OUT§
To enjoy a richer sound
≥Use connections D, E, F or G (ꢁ9–10)
additionally.
(Unplug the red and white plugs.)
Connecting an amplifier/receiver
D Connecting to HDMI AV OUT terminal
When connected to a compatible amplifier/receiver, you can enjoy surround sound recorded with Dolby Digital Plus, Dolby TrueHD or
DTS-HD.
Multi channel speakers
HDMI OUT
NECESSARY SETTINGS
≥“HDMI Video Mode” and “HDMI Audio
Output”: “On” (ꢁ31)
≥“Digital Audio Output”: Depending on the
connected amplifier/receiver (ꢁ30)
HDMI IN
HDMI IN
HDMI
compatible
television
NOTE
TIPS
Amplifier/receiver
With this connection, you can use VIERA
Link “HDAVI Control” (ꢁ28).
HDMI cable
≥Enjoying High Bit rate Audio with 7.1ch
speaker and 5.1ch speaker (ꢁ20)
Back of the unit
E Connecting to 7.1ch AUDIO OUT terminal [BD80]
When connected to a compatible amplifier/receiver using the 7.1ch AUDIO OUT terminals, you can enjoy surround sound.
Multi channel speakers
NECESSARY SETTINGS
≥“Analog Audio Output”: “7.1ch” (ꢁ31)
NOTE
≥Enjoying High Bit rate Audio with 7.1ch
speaker and 5.1ch speaker (ꢁ20)
Connect Audio
cables to terminals
corresponding to
the speakers you
have connected.
When connecting amplifier/receiver or
other devices with HDMI AV OUT terminal
≥“HDMI Audio Output” : “Off” (ꢁ31)
(Otherwise, depending on the
specifications of connected devices, the
audio from AUDIO OUT terminal may be
output as two channels only.)
When connecting a television with HDMI
AV OUT terminal (ꢁ8, A).
Back of the unit
≥“HDMI Audio Output” : “Off” (ꢁ31)
(Otherwise, the sound may not be output
with the desired audio.)
Amplifier/receiver
≥Depending on how the disc was recorded,
the audio may not be output properly on
the number of channels desired.
Cable connections
a Surround back speaker (L/R)
b Front speaker (L/R)
d Center speaker
e Subwoofer
c Surround speaker (L/R)
RQT9407
9
Download from Www.Somanuals.com. All Manuals Search And Download.
F Connecting to 5.1ch AUDIO OUT terminal [BD80]
When connected to a compatible amplifier/receiver using the 5.1ch AUDIO OUT terminals, you can enjoy surround sound.
NECESSARY SETTINGS
≥“Analog Audio Output”: “2ch (Downmix) +
5.1ch” (ꢁ31)
Multi channel speakers
NOTE
≥7.1 channel disc is mixed down to 5.1
channel audio.
≥Enjoying High Bit rate Audio with 7.1ch
speaker and 5.1ch speaker (ꢁ20)
Connect Audio
cables to
terminals
corresponding to
the speakers you
have connected.
When connecting amplifier/receiver or
other devices with HDMI AV OUT terminal
≥“HDMI Audio Output” : “Off” (ꢁ31)
(Otherwise, depending on the
specifications of connected devices, the
audio from AUDIO OUT terminal may be
output as two channels only.)
When connecting a television with HDMI
AV OUT terminal (ꢁ8, A).
≥“HDMI Audio Output” : “Off” (ꢁ31)
(Otherwise, the sound may not be output
with the desired audio.)
Back of the unit
Amplifier/receiver
≥Depending on how the disc was recorded,
the audio may not be output properly on
the number of channels desired.
Cable connections
a Front speaker (L/R)
b Surround speaker (L/R)
c Center speaker
d Subwoofer
G Connecting to DIGITAL AUDIO OUT terminal
You can enjoy surround sound, when connected to an amplifier/receiver using the COAXIAL ([BD80]) or OPTICAL terminal.
With COAXIAL ([BD80]) or OPTICAL
NECESSARY SETTINGS
≥“Digital Audio Output” : Depending on the
connected amplifier/receiver (ꢁ30)
Coaxial cable
COAXIAL IN
NOTE
Back of the unit
When connecting a television with HDMI
AV OUT terminal (ꢁ8, A).
≥“HDMI Audio Output” : “Off” (ꢁ31)
(Otherwise, the sound may not be output
with the desired audio.)
Amplifier/receiver
OPTICAL IN
Optical digital audio cable
Connecting AC mains lead
Back of the unit
Cooling fan
Connect only after all other connections
are complete.
NOTE
TIPS
Conserving power
This unit consumes a small amount of power
even when it is turned off (“Quick Start”: “Off”,
less than 0.5 W). To save power when the
unit is not to be used for a long time, unplug it
from the household mains socket.
AC mains lead (included)
[For]Middle]East]
Use the AC mains lead that matches the socket for
the area you live in.
[For\Saudi\Arabia[
BE SURE TO READ THE
CAUTION FOR THE AC
MAINS LEAD ON PAGE 2
BEFORE CONNECTION.
To a household mains socket
[For[Australia[and[New[Zealand]
(AC 220 to 240 V, 50 Hz)
[For]Asia]and]Middle]East]
(AC 220 to 240 V, 50 Hz/60 Hz)
[For[Asia]
AC mains lead with a label is for Thailand.
AC mains lead without a label is for areas other
than Thailand.
RQT9407
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Control reference guide
! Turn the unit on and off (ꢁ12)
@ TV operation buttons (ꢁ12)
You can operate the TV through the unit’s remote control.
[Í TV] : Turn the television on and off
[AV] : Switch the input select
[i j VOL] : Adjust the volume
[W X CH] : Channel select
# Open or close the disc tray (ꢁ16)
$ Select title numbers, etc./Enter numbers or characters (ꢁ15, 17)
(The character buttons may be used when operating VIERA CAST
contents. ꢂ25)
VOL
CH
OPEN/CLOSE
AV
RECEIVER
% Cancel
^ Basic playback control buttons (ꢁ16, 17)
& Show status messages (ꢁ17)
VOL
* Show Pop-up menu (ꢁ16)
( Show Top menu/Direct Navigator (ꢁ16)
AJ Show OPTION menu (ꢁ18)
AA These buttons are used when;
≥Operating a BD-Video disc that includes JavaTM applications
(BD-J). For more information about operating this kind of disc,
please read the instructions that came with the disc.
≥Displaying “Title View” and “Album View” screens. (Only the [R]
RE-MASTER
CANCEL
AUDIO
SKIP
SLOW/SEARCH
and [G] buttons, ꢂ22)
≥Operating contents of VIERA CAST. (ꢁ25)
AB Show Setup menu (ꢁ29)
STOP
PAUSE
AC Switch on/off Secondary Video (Picture-in-picture) (ꢁ19)
AD Transmit the remote control signal
AE Adjust the volume of an amplifier/receiver through the unit’s
remote control.
PLAY
STATUS
FUNCTIONS
AF Displays Home screen of VIERA CAST (ꢁ25)
AG Reproduce more natural audio (ꢁ18)
AH Select audio (ꢁ18)
P
AI Show FUNCTIONS menu (ꢁ25)
BJ Selection/OK, Frame-by-frame (ꢁ17)
BA Show on-screen menu (ꢁ26)
OK
BB Return to previous screen
BC Select drive (BD/DVD/CD, SD card or USB device) (ꢁ16)
BD Switch on/off Secondary Audio (ꢁ19)
OPTION
RETURN
B
CAUTION
Do not place objects in front of the unit. The disc tray may collide
with objects when it is opened, and this may cause injury.
R
G
Y
SETUP
PIP
SECONDARY
AUDIO
SD
CARD
ヱヶロロノヰヱユワ
Pull to flip down the
front panel.
1 Standby/on switch (Í/I) (ꢁ16)
8 Open or close the disc tray (ꢁ16)
9 Stop (ꢁ17)
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of power.
: Pause (ꢁ17)
2 Display
; Start play (ꢁ16)
Rear panel terminals (ꢁ8–10, 13)
Disc indicator
SD card indicator
USB device indicator
The indicator blinks when reading data from a disc, a card or a
USB device, or writing data to a card.
3 Disc tray (ꢁ16)
4 [BD80] SD Card LED
≥It is possible to set the LED to turn on/off. (ꢁ30, SD Card LED
Control)
5 Remote control signal sensor (ꢁ5)
6 USB port (ꢁ16)
7 SD card slot (ꢁ16)
RQT9407
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Easy Setting
After connecting your new player and pressing the standby/on button, a screen for the basic settings will appear.
Preparation
≥You can perform this setup anytime by
selecting “Easy Setting” in the Setup menu.
(ꢁ32)
≥You can also change these settings
individually. (ꢁ31, 32)
Turn on the television and select the
appropriate video input on the television.
1 Press [Í].
TIPS
Setup screen appears.
≥If this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 2 or later via an HDMI
cable, then the “TV Aspect” setting information on the
TV is captured from the TV.
OK
2 Follow the on-screen instructions and
make the settings with [3, 4] and [OK].
“TV Aspect”, “Analog Audio Output”([BD80]) and “Quick
Start” are set. (ꢁ31, 32)
Setting the television and amplifier/receiver
operation
You can operate the TV or amplifier/receiver using the unit’s remote control.
Point the remote control at the television or amplifier/receiver.
≥If your television or amplifier/receiver brand
1
For televisions
has more than one code listed, select the
one that allows correct operation.
≥If your television or amplifier/receiver brand
is not listed or if the code listed for them
does not allow control of your television or
amplifier/receiver, this remote control is not
compatible with them. Use their remote
control.
Input the 2-digit code with the numbered buttons while
pressing [Í TV].
For amplifiers/receivers
Input the 2-digit code with the numbered buttons while
pressing [RECEIVER j VOL].
e.g., 01: [0] ꢂ[1]
NOTE
2 Test by turning on the television or adjusting the volume of
the amplifier/receiver.
Brand
TV Code
Brand
TV Code
Brand
Amplifier/Receiver Code
MIVAR
24
Panasonic
01/02/03
Panasonic
01/02/03/04
NEC
36
TECHNICS
ADCOM
AIWA
35
AIWA
35
NOBLEX
NOKIA
NORDMENDE
OLEVIA
ONWA
ORION
PEONY
PHILCO
PHILIPS
PHONOLA
PIONEER
PROVIEW
PYE
RADIOLA
SABA
SALORA
SAMSUNG
SANSUI
SANYO
33
62
AKAI
BEJING
BEKO
BENQ
BP
BRANDT
BUSH
27/30
33
25/26/27/60/61
04/05/06/48/49
10
45
ALPINE
ARCAM
BOSE
DENON
HARMAN
KARDON
JVC
KENWOOD
KLH
LG
LUXMAN
MARANTZ
MCINTOSH
NAD
NAKAMICHI
ONKYO
OUTLAW
PREAMP
PHILIPS
PIONEER
SAMSUNG
SONY
TEAC
THOMSON
YAMAHA
63
05/71/72/73/74
57/58
58/59
30/39/70
07
09
05
08/09/10/11/50/51/52
10/15
49/69
12
12
13/14
15/16/17
18
19
59
20/21
54
22/55
60/61
23
05
41/48/64
CENTREX
CHANGHONG
CURTIS
DAEWOO
DESMET
DUAL
ELEMIS
FERGUSON
FINLUX
FISHER
FUJITSU
FUNAI
GOLDSTAR
GOODMANS
GRADIENTE
GRUNDIG
HIKONA
HITACHI
INNO HIT
IRRADIO
ITT
66
05/06/46
69
05
05
37/38
64/65
52
05
05
05
05
05
10
10/34
26
61
32/42/43/65/68
05
21
53
21/54/55/56
05/29/30
63/67
56
SCHNEIDER
SEG
SELECO
SHARP
05/50/51
24/44
05/69/75/76/77/78
05
25/26/27/28
45/46/47
05/25
36
18
09
29/30/31
SIEMENS
SINUDYNE
SONY
09
52
32/33/34
05
05/22/23/40/41
43/53
08
05
36/37/38/39/40/41/42
TCL
31/33/66/67/69
10/11/12/13/14
52
30
TELEFUNKEN
TEVION
TEX ONDA
THOMSON
TOSHIBA
25
JINGXING
JVC
KDS
KOLIN
KONKA
LG
LOEWE
MAG
49
52
10/15/44
16/57
17/30/39/70
52
45
62
WHITE
05
WESTINGHOUSE
05/50/51
07/46
52
05/28
05/19/20/47
YAMAHA
18/41
METZ
MITSUBISHI
RQT9407
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Network connection
≥Use shielded LAN cables when connecting to peripheral
devices.
≥When operating the VIERA CAST, use high-speed internet
service no less than 1.5 Mbps for SD (Standard Definition)
and 6 Mbps for HD (High Definition) picture quality by your
local broadband company.
The following services can be used when this unit is connected to
broadband.
NOTE
≥Firmware can be updated (ꢂbelow)
≥You can enjoy the BD-Live (ꢁ19)
≥You can enjoy the VIERA CAST (ꢁ25)
– If using slow Internet connection, the video may not be
displayed correctly.
≥After connecting to the Internet, perform necessary settings.
(ꢁ14)
≥Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.
Internet
Back of the unit
Straight LAN cable (not included)
Hub or broadband router
≥When your communication equipment (modem), etc. has no broadband router
functions: Connect a broadband router.
When your communication equipment (modem), etc. has broadband router
functions but there are no vacant ports: Connect a hub.
≥Use a router that supports 10BASE-T/100BASE-TX.
Telecommunications equipment
(modem, etc.)
Firmware updating
]
≥Downloading will require several minutes. It
may take longer or the Internet may not be
connected depending on the connection
environment. It is required that you use a
broadband connection.
When this unit remains connected to the Internet, it will automatically check for the latest
firmware version when it is turned on.
NOTE
TIPS
When latest firmware version is available, the following screen is displayed.
Select “Yes” or “No”.
Firmware Update
≥If downloading on this unit fails or this unit
is not connected to the Internet, then you
can download the latest firmware from the
following website and burn it to a CD-R to
update the firmware.
(This site is in English only.)
≥When the unit is connected to the Internet,
communication charges may be generated.
≥If you do not want to check for the latest
firmware version when the unit is turned
on, set “Automatic Update Check” to “Off”.
(ꢁ32)
The latest firmware is available.
Latest Online Version: x.x
Current Installed Version: x.x
Do you want to start firmware update?
For the update information, please visit the
following website:
Yes
No
≥If “Yes” is selected, then follow the on-screen instructions.
≥If “No” is selected, then manually update the firmware later. (ꢂright)
Manually updating the firmware
If the firmware update is not carried out when
the unit is turned on, a message is displayed
when displaying the FUNCTIONS menu.
After the latest firmware is downloaded, the system will be restarted and the firmware will
be updated.
When the system is restarted, the screen display disappears and
“START” is displayed on the unit’s display.
The latest firmware is available.
Please update firmware in Setup.
After the firmware is updated and the system is restarted, the following screen indicates
that the firmware update has been completed.
The firmware has been updated.
Current Installed Version: x.x
1) Press [SETUP].
2) Press [3, 4] to select “General” and
press [OK].
3) Press [3, 4] to select “Firmware
Update” and press [OK].
4) Press [3, 4] to select “Update Now” and
press [OK].
5) Press [2, 1] to select “Yes” and press
[OK].
OK
RETURN
≥During the update process, no other operations can be performed. Serious damage
may occur if you turn off the unit and/or press any buttons.
RQT9407
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Network settings
These settings are used if you will connect this unit to the Internet.
≥The connection to the Internet may take time or the Internet may not be connected depending on the connection environment. (ꢁ32)
It is required that you use a broadband connection.
Preparation
≥Connect to the network. (ꢁ13)
Testing of “IP Address / DNS Settings”
Setting the IP address
Always test the connection when a LAN cable is connected.
1 Press [SETUP].
2 Press [3, 4] to select “Network Settings”
and press [OK].
3 Press [3, 4] to select “IP Address / DNS
Settings” and press [OK].
4 Press [3, 4] to select “Connection Test” and
In most cases, default settings can normally be used without
making any changes.
Set the IP address only when the router has no DHCP server
functions or when the router’s DHCP server function is
disabled.
After performing steps 1–3 (ꢀleft)
4 Press [3, 4] to select “IP Address
Auto-Assignment” and press [2, 1] to select
“Off”.
press [OK].
5 Press [3, 4] to select “IP Address”, “Subnet
Mask” or “Gateway Address” and press [OK].
6 Enter numbers with the numbered buttons
IP Address / DNS Settings
Connection Test
IP Address Auto-Assignment
IP Address
On
and press [OK].
≥After checking the specifications for your broadband router,
enter each number.
If the number is unknown, then check the number of other
devices such as personal computers connected via a LAN
cable. Assign a different number from those of other devices
for the “IP Address” and the same number for others.
≥If a wrong number is entered, then press [CANCEL].
Subnet Mask
Gateway Address
DNS-IP Auto-Assignment
On
On
Primary DNS
Secondary DNS
Connection Speed Auto-Config
Connection Speed Setting
OK
7 Press [2, 1] to select “Yes” and press [OK].
[Note]
≥The numeric input range is between 0 and 255.
RETURN
Setting the DNS-IP
“Testing...”:The test is in progress.
“Pass”:
The connection is completed.
Press [RETURN] to exit.
Please check the connection and settings.
In most cases, default settings can normally be used without
making any changes.
When setting an assigned DNS server from your Internet
service provider, perform the following settings.
“Fail”:
[Note]
≥Perform the “Connection Test” also when any change was made
to the “IP Address / DNS Settings”.
After performing steps 1–3 (ꢀleft)
4 Press [3, 4] to select “DNS-IP
Auto-Assignment” and press [2, 1] to select
“Off”.
≥If the connection test fails, it may be necessary to set the MAC
address of this unit at the router side. The MAC address can be
displayed by pressing [SETUP] and selecting “Network Settings”.
5 Press [3, 4] to select “Primary DNS” or
“Secondary DNS”and press [OK].
6 Enter numbers with the numbered buttons
and press [OK].
Network Settings
IP Address / DNS Settings
Proxy Server Settings
Network Service
≥Follow the instructions given by your Internet service
provider and enter the numbers.
MAC Address: xx-xx-xx-xx-xx-xx
If the number is unknown, then check the number of other
devices such as personal computers connected via a LAN
cable and assign the same number.
≥If a wrong number is entered, then press [CANCEL].
OK
RETURN
Primary DNS
Please input Primary DNS and press
[OK]. Press [CANCEL] to delete the selected
character. To clear this setting, delete all
characters and press [OK].
192
1
.
.
.
0
-
9
Number
7 Press [2, 1] to select “Yes” and press [OK].
[Note]
≥The numeric input range is between 0 and 255.
RQT9407
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the connection speed
Setting the proxy server
When the connection test results in “Fail” after the IP and DNS-IP
addresses are assigned, perform the following settings.
In most cases, default settings can normally be used without
making any changes.
Please use this setting when instructed to by your Internet
service provider.
After performing steps 1–3 (ꢁ14)
4 Press [3, 4] to select “Connection Speed
Auto-Config” and press [2, 1] to select
“Off”.
After performing steps 1–3 (ꢀleft)
4 Press [3, 4] to select “Proxy Address” and
press [OK].
≥The text entry screen is displayed.
Text field: shows the text you have entered
5 Press [3, 4] to select “Connection Speed
Setting” and press [2, 1] to select a
connection speed.
≥Select a connection speed in accordance with the environment
of the network connected.
Proxy Address
_
≥When the settings are changed, the network connection may be
disabled depending on the device.
1
1
A
D
G
J
M
P
T
W
.
2
B
E
H
K
N
Q
U
X
,
3
C
F
I
4
5
a
d
g
j
m
p
t
6
b
e
h
k
n
q
u
x
’
7
c
f
i
l
o
r
v
y
:
8
+
9
-
0
*
%
&
@
_
2
3
4
5
6
7
8
9
0
/
#
<
[
s
{
=
$
>
]
(
}
Delete
Finish
L
O
R
V
Y
?
)
~
S
Testing of “Proxy Server Settings”
w
“
Space
z
;
\
I
^
Z
!
`
Always test the connection when new “Proxy Server Settings”
have been made.
OK
RETURN
0
--
9
1 Press [SETUP].
2 Press [3, 4] to select “Network Settings”
and press [OK].
3 Press [3, 4] to select “Proxy Server
Settings” and press [OK].
4 Press [3, 4] to select “Connection Test” and
5 Press [3, 4, 2, 1] to select a character and
press [OK].
Repeat this step to enter other characters.
≥Press [;] to delete.
6 Press [∫] when you complete the entry.
7 Press [3, 4] to select “Proxy Port Number”
and press [OK].
8 Enter numbers with the numbered buttons
and press [OK].
press [OK].
Proxy Server Settings
Initialize
Proxy Address
Proxy Port Number
Proxy Port Number
Connection Test
0
----
Input HTTP Proxy server port number and
press [OK]. The character below can be
deleted with [CANCEL]. The number will be
set to "0" if all characters are deleted and
[OK] is pressed.
0
OK
0
-
9
Number
RETURN
“Testing...”:The test is in progress.
9 Press [2, 1] to select “Yes” and press [OK].
“Pass”:
The connection is completed.
Press [RETURN] to exit.
Please check the connection and settings.
“Fail”:
≥The specified ports may be blocked and not be able to be
used depending on the network environment.
In order to restore the default settings
After performing steps 1–3 (ꢀleft)
TIPS
1) Press [3, 4] to select “Initialize” and press [OK].
2) Press [2, 1] to select “Yes” and press [OK].
Using the numbered buttons to enter characters
e.g., entering the letter “F”
1) Press [3] to move to the 3rd row.
2) Press [3] twice to highlight “F”.
3) Press [OK].
RQT9407
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operation
Inserting or removing a media
Inserting or removing a disc
Playing video contents
Instructions for operations are generally described using the remote
control in these operating instructions.
[DivX]: [BD80] only
Preparation
Turn on the television and select the
AV1
appropriate video input on the television.
1 Press [< OPEN/CLOSE] to open the disc tray.
2 Insert or remove the disc.
VOL
CH
OPEN/CLOSE
AV
RECEIVER
≥Press [< OPEN/CLOSE] again to close the disc tray.
≥DVD-RAM: Remove discs from their cartridges before use.
≥Insert double-sided discs so the label for the side you want to play
VOL
is facing up.
RE-MASTER
CANCEL
SKIP
AUDIO
Inserting or removing an SD card
Inserting a card
SLOW/SEARCH
STOP
PAUSE
PLAY
STATUS
FUNCTIONS
P
SD
CARD
OK
OPTION
RETURN
B
Insert the card label up with the cut-off corner
on the right.
1 Pull to flip down the front panel.
R
G
Y
2 Insert the SD card into the SD card slot.
SETUP
PIP
SECONDARY
AUDIO
≥Press on the center of the card until it clicks into place.
Removing the card
1 Press [Í] to turn on the unit.
2 Insert the media (ꢀleft).
Play starts.
Press on the center of the card and pull it straight out.
e.g.,
≥When the card indicator (“SD”) on the unit’s display is flashing,
the card is being read from or written to. Do not turn off the unit or
remove the card. Such action may result in malfunction or loss of
the card’s contents.
≥If play does not start, press [1] (PLAY).
≥If the media with data in different file
formats is inserted, the file selection menu is displayed. Press
[3, 4] to select the desired file format and press [OK].
≥If the menu is displayed, press [3, 4, 2, 1] to select the item
and press [OK].
Inserting or removing a USB device
Inserting a USB device
≥If the screen prompting you to use the color buttons appears,
continue to operate with the color buttons on the remote control.
≥Signal from PAL discs is output as PAL. Signal from
NTSC discs is output as “NTSC” or “PAL60”. You can
select “NTSC” or “PAL60” in “NTSC Contents Output” for
NOTE
NTSC discs. (ꢁ29)
SD
CARD
≥
DISCS CONTINUE TO ROTATE WHILE MENUS ARE
DISPLAYED. Press [
protect the unit’s motor, your television screen and so on.
∫] when you have finished playback to
≥Before inserting any USB device to this unit, ensure that the data
stored therein has been backed up.
≥Check the orientation of the USB connector and insert it straight
in.
≥Some USB devices inserted into this unit may cause this unit to
stop operating. Such USB devices cannot be used on this unit.
To switch drives
Press [DRIVE SELECT] to select “BD/DVD/CD”, “SD card”
or “USB device”.
≥If a media is inserted while the unit is stopped, the drive
switches automatically depending on the inserted media.
To display menus
[BD-V] [AVCHD] [DVD-VR] [DVD-V] [DivX]
Press [TOP MENU/DIRECT NAVIGATOR].
TIPS
1 Pull to flip down the front panel.
2 Insert the USB device into the USB port.
To show Pop-up menu [BD-V]
Removing the USB device
The Pop-up menu is a special feature available with some
BD-Video discs. This menu may vary with discs. For the
operating method, refer to the instructions for the disc.
1) Press [POP-UP MENU].
2) Press [3, 4, 2, 1] to select the item and press [OK].
≥Pop-up menu also appears by pressing [OPTION] and
selecting “Pop-up Menu”.
Complete all USB device-related operations and pull the USB
device straight out.
≥When the USB device indicator is flashing, the USB device is
being read from. Do not turn off the unit or remove the USB
device. Such action may result in malfunction or loss of the USB
device’s contents.
≥Press [POP-UP MENU] to exit the screen.
About the use of USB device
≥The producers of the disc can control how discs are
played. So you may not always be able to control play as
described in these operating instructions. Read the disc’s
instructions carefully.
≥When playing a set of two or more BD-Video discs, the
menu screen may continue to display even if the disc has
been ejected.
Since the physical size of USB device can vary, please consider its
width when connecting any USB device to this unit. It is possible
that some devices may accidentally activate the playback button
and cause this unit to not operate properly.
≥In such cases we recommend using a USB extension cable (not
included).
≥It may take time to read BD-Video discs that include
BD-J (ꢁ42).
RQT9407
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Other operations during play (These functions may not work depending on the media.)
STOP
Stop
Frame-by-frame
OK
The stopped position is memorized.
Resume play function
While paused, press [2] (2;) or [1] (;1).
Each press shows the next frame.
≥Press and hold to change in succession forward or backward.
≥Press [1] (PLAY) to revert to normal playback speed.
≥[BD-V] [AVCHD]: Forward direction [1] (;1) only.
Press [1] (PLAY) to restart from this position.
≥The position is cleared if the tray is opened or you press [∫]
several times to display “STOP” on unit’s display.
≥[BD-V]: On BD-Video discs including BD-J (ꢁ42), the resume
play function does not work.
≥[CD] [MP3] [DivX] [MPEG2]: The position is cleared if the unit is
turned off.
Screen Aspect
PAUSE
Pause
When black bars are shown at the top, bottom, left, and right sides
of the screen, you can enlarge the image to fill the screen.
1 Press [OPTION].
2 Press [3, 4] to select “Screen Aspect” and press [OK].
3 Press [2, 1] to select “Side cut” or “Zoom”.
Normal: Normal output
Side cut: The black bars on the right and left sides of the 16:9
image disappear and the image is enlarged. Please
note that the right and left sides of the image are cut off
when the black bar is not displayed.
Press [;] again or [1] (PLAY) to restart play.
SLOW/SEARCH
Search/Slow-motion
The speed increases up to 5 steps.
Zoom:
The black bars on the top and bottom sides of the 4:3
image disappear and the image is enlarged. Please
note that the top and bottom sides of the image are cut
off when the black bar is not displayed.
≥Press [1] (PLAY) to revert to normal playback speed.
≥For some discs, the speed may not change.
Search
While playing, press [6] or [5].
≥[BD-V] [AVCHD] [DVD-VR] [DVD-V]:
Audio is heard during first level of forward search.
≥[DivX] [MPEG2]: Audio is not heard during all levels of search.
≥[CD] [MP3]: The speed is fixed to a single step.
Slow-motion
≥[BD-V] [DVD-V]: “Side cut” does not have any effect.
≥When “TV Aspect” (ꢁ31) is set to “4:3 Pan & Scan” or “4:3
Letterbox”, the “Zoom” effect is disabled.
STATUS
While paused, press [6] or [5].
≥[BD-V] [AVCHD]: Forward direction [5] only.
Status messages
≥[DVD-VR] If continued for approx. 5 minutes, slow-motion play
:
pauses automatically.
The status messages give you information about what is currently
being played. Each time you press [STATUS], the information
displayed will change.
SKIP
Skip
Type of disc
Play status
e.g. [BD-V]
BD-Video
PLAY
Skip to the title, chapter or track you want to play.
≥Each press increases the number of skips.
≥[DivX]: Backward direction [:] only.
Starting from a selected item
T: Title
C: Chapter
Items change
depending on the
disc played.
No display
PL: Playlist
Play starts from the selected title or chapter.
[BD-V] [AVCHD]
[DVD-V]
Elapsed time in the title
e.g., 5: [0] ꢂ[0] ꢂ[5]
15: [0] ꢂ[1] ꢂ[5]
e.g., 5: [0] ꢂ[5]
15: [1] ꢂ[5]
T1 C1 0:05.14
0:20.52
≥While stopped (the image on the right is
displayed on the screen), the title is
designated. While playing, the chapter is
designated.
Current position
Total time
Depending on the kind of disc or the playback status, this
display may not appear.
RQT9407
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Other operations during play (Continued) (These functions may not work depending on the media.)
Reproducing more natural audio
(Discs recorded at 48 kHz or less)
RE-MASTER
Changing audio during play
AUDIO
[BD-V] [AVCHD] [DVD-V]
This feature gives you a more natural sound by adding higher
frequency signals not recorded on the track.
e.g. [DVD-V]
1 ENG
Digital 3/2.1ch
Soundtrack
Press [RE-MASTER] to select “Re-master 1”, “Re-master 2” or
“Re-master 3”.
Select the one that you like best.
English is selected.
You can change the audio channel number each time you press the
button. This allows you to change the soundtrack language (ꢁ26,
Soundtrack), etc.
When playing LPCM sound
Type of music
Other types of
sound
Setting
Effect level
[DVD-VR] [DivX]
Re-master 1 High tempo (e.g., pop and rock) Light
AudioLR>AudioL>Audio R
DVD-RAM(VR)
PLAY
Re-master 2 Various tempos (e.g., jazz)
Medium
^-------------------------------------------------}
Re-master 3 Low tempo (e.g., classical)
Strong
Off
Off
Off
“AudioLR” is
selected
AudioLR
≥This function is effective for audio from the HDMI terminal or the
DIGITAL AUDIO OUT terminal only when “Dolby D/Dolby D +/
Dolby TrueHD” or “DTS/DTS-HD” is set to “PCM”. (However, in
this case, audio is output as 2ch from the DIGITAL AUDIO OUT
terminal.)
Chapter playback
[DVD-VR]
1 Insert a disc (ꢁ16).
2
While “Title View” screen is displayed
Press [3, 4] to select the title and press [OPTION].
To display the title properties
(recording date, etc.)
Properties
Chapter View
To Picture
To select the chapter
Playing still pictures (ꢁ22)
3 Press [3, 4] to select “Chapter View” and press [OK].
4 Press [2, 1] to select the chapter and press [OK].
Playing HD Video or SD Video
[AVCHD] [MPEG2]
It is possible to playback the HD (High Definition) video recorded on the Panasonic High definition Video Camera on the DVD-RAM/R/RW/R DL/
+R/+RW/+R DL or SD card, and SD (Standard Definition) Video recorded on the Panasonic SD Video Camera on the SD card.
To return to the previous screen
Press [RETURN].
To exit the screen
Press [DIRECT NAVIGATOR].
1 Insert a disc or SD card. (ꢁ16)
≥“Title View” or “Video (MPEG-2)” screen is
displayed.
e.g.,
To switch from other menus to AVCHD or
MPEG2 menu
(If the media contains data in different file
formats)
SD CARD
e.g.,
≥If a media containing data in different
file formats is inserted, the file
selection menu may be displayed.
Press [3, 4] to select “Play Video
(AVCHD)” or “Play Video (MPEG-2)”
and press [OK].
Play Pictures (JPEG)
Play Video (AVCHD)
Play Video (MPEG-2)
1) Press [FUNCTIONS].
2) Press [3, 4] to select “Menu” and press
[OK].
3) Press [3, 4] to select “Play Video
(AVCHD)” or “Play Video (MPEG-2)” and
press [OK].
Select an action or press RETURN.
OK
OPTION
RETURN
e.g.,
DIRECT NAVIGATOR
SD CARD
Video (MPEG-2)
≥It may pause for a few seconds on the
break of images when editing such as
partial deletion is performed.
≥High definition video (transfer rate of
18 Mbps or faster) cannot be played back
correctly if it was recorded on a DVD
compatible to double speed or slower.
2 Press [3, 4, 2, 1] to select
Video
No. Date Day
Time
Name of item
the title and press [OK].
001 01.05
002 01.05
003 01.05
10:00
Wed
Wed
Wed
11:30
11:59
Rec time
0:15.47
NOTE
004
02.05 Thu 10:00
005 02.05 Thu 11:30
006 02.05 Thu 11:59
007 03.05 Fri
10:00
10:30
11:30
11:59
008 03.05
009 03.05
010 03.05
Fri
Fri
Fri
Page 01/02
Previous
Next
Play
OPTION
RETURN
RQT9407
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying BD-LIVE or BONUSVIEW in
BD-Video
[BD-V]
What is BONUSVIEW?
BONUSVIEW allows you to enjoy functions such as picture-in-picture or secondary audio etc., with BD-Video supporting BD-ROM Profile 1
version 1.1/ Final Standard Profile.
What is BD-Live?
In addition to the BONUSVIEW function, BD-Video supporting BD-ROM Profile 2 that has a network extension function allows you to enjoy more
functions such as subtitles, exclusive images and online games by connecting this unit to the Internet. In order to use the Internet feature, you
must have this unit connected to a broadband network (ꢁ13).
≥These discs may not be on sale in certain regions.
≥The usable functions and the operating method may vary with each disc, please refer to the instructions on the disc and/or visit their website.
Playing secondary video (picture-in-picture) and secondary audio
To turn on/off secondary video
Press [PIP].
Secondary video is played.
Secondary video
≥Discs may not always be played back
according to the settings on this unit, as
certain playback formats are prioritized on
certain discs.
≥Only the primary video is played during
search/slow-motion or frame-by-frame.
≥When “BD-Video Secondary Audio” in
“Digital Audio Output” is set to “Off”,
secondary audio will not be played even if
[SECONDARY AUDIO] is pressed. Please
check that “BD-Video Secondary Audio” is
set to “On” (ꢁ30).
NOTE
≥“PiP ON” is displayed.
≥Press the button to turn it ON and OFF.
To turn on/off secondary audio
Press [SECONDARY AUDIO].
The secondary audio is played.
≥“Secondary Audio ON” is displayed.
≥Press the button to turn it ON and OFF.
Primary video
≥When the secondary video is turned off, the
secondary audio is not be played.
Enjoying BD-Live discs with Internet
Many BD-Live compatible discs require content to be downloaded onto an SD card
(ꢁ42, Local storage) in order to access the available BD-Live features.
≥An SD card with 1 GB or more of free space (SD Speed Class Rating 2 or higher) needs
to be inserted prior to inserting the BD-Live compatible disc.
≥While using this feature, do not remove the
SD card. Doing so will cause playback to
stop.
≥A message may be displayed when SD
card doesn't have enough storage capacity
for BD-Live content.
Please make space available on the current
SD card, or insert another SD card.
≥The unit must be connected to the Internet
and set up (ꢁ14) to use the BD-Live
functions. “BD-Live Internet Access” may
need to be changed for certain discs
(ꢁ29).
≥When discs supporting BD-Live are played
back, the player or disc IDs may be sent to
the content provider via the Internet. You
can restrict Internet access (“BD-Live
Internet Access” ꢁ29).
NOTE
Some BD-Live content available on the Blu-ray discs may require an Internet
account to be created in order to access the BD-Live content. Follow the screen
display or instruction manual of the disc for information on acquiring an account.
Preparation
≥Connect to the network. (ꢁ13)
1 Insert an SD card (ꢁ16).
≥If the SD card menu screen is displayed, press [DRIVE SELECT] on the remote
control, select “BD/DVD/CD”.
2 Insert the disc (ꢁ16).
≥For operation method, refer to the instructions on the disc.
≥The unit is connected to the Internet when
BD-Live functions are used, generating
communication charges.
To use the above functions, it is recommended that you format the card on this unit.
Format the card using the following procedures.
≥The playback may be paused depending on
the communication environment.
Some functions may be disabled to prevent
skipping to sections that have not been
downloaded, etc.
Formatting SD cards/Deleting data
It is impossible to restore data after formatting the card or erasing the data.
Once a card is formatted, all data including those recorded on the PC is erased as well,
even if the data were protected with other equipment.
1) Insert an SD card (ꢁ16).
2) Press [FUNCTIONS].
3) Press [3, 4] to select “To Others” and press [OK].
4) Press [3, 4] to select “Card Management” and press [OK].
Card Management
SD CARD
No. of Files
6
5) Press [3, 4] to select “BD-Video Data Erase” or
“Format SD Card” and press [OK].
Free space 300 MB
6) Press [2, 1] to select “Yes” and press [OK].
7) Press [2, 1] to select “Start” and press [OK].
BD-Video Data Erase
Format SD Card
OK
Format this SD Card.
RETURN
RQT9407
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying High Bit rate Audio and Video
This unit supports high bit rate audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) adopted in
BD-Video.
Enjoying High Bit rate Audio with 7.1ch speaker and 5.1ch speaker
To enjoy above high bit rate audio, the following conditions are necessary. (Part shown in the shaded area of table given below)
NECESSARY CONNECTIONS
≥HDMI AV OUT terminal: (ꢁ9)
≥7.1ch AUDIO OUT terminal [BD80]: (ꢁ9)/ 5.1ch AUDIO OUT terminal [BD80]: (ꢁ10)
NECESSARY SETTINGS
≥Set “BD-Video Secondary Audio” to “Off”. (ꢁ30)
≥HDMI AV OUT terminal: Set “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to “Bitstream” or “PCM”. (ꢁ30)
≥7.1ch AUDIO OUT terminal [BD80]: Set “Analog Audio Output” to “7.1ch”. (ꢁ31)
≥5.1ch AUDIO OUT terminal [BD80]: Set “Analog Audio Output” to “2ch (Downmix) + 5.1ch”. (ꢁ31)
About audio from audio output terminal
Connect an amplifier/receiver (ꢁ9, 10) and confirm the desired audio type and necessary settings (“BD-Video Secondary Audio”, “Dolby D/Dolby
D +/Dolby TrueHD” or “DTS/DTS-HD”).
≥The number of channels listed is the maximum possible number of output channels.
≥Also, depending on the specifications or the settings of the amplifier/receiver, the results of the output may vary.
5.1ch
DIGITAL AUDIO OUT
Terminal
HDMI AV OUT
“Bitstream”*1
7.1ch AUDIO OUT [BD80] AUDIOOUT
(Coaxial [BD80]/Optical)
“Bitstream” “PCM”
“On”/“Off” “On”/“Off”
Dolby Digital
[BD80]
“Dolby D/Dolby D +/
Dolby TrueHD”/
“DTS/DTS-HD”
“PCM”*3
“On” “Off”
—
—
“BD-Video
Secondary Audio”
“On”*2
“Off”
“On”
“Off”
“On”/“Off”
Dolby
Digital/
DolbyDigital
EX
Dolby Digital
/
/
Dolby Digital/
DolbyDigital
DolbyDigital
5.1ch PCM
5.1ch
Dolby Digital EX*5
EX*6
EX*6
DolbyDigital
Plus
Dolby Digital Plus
Dolby TrueHD
5.1ch
Dolby Digital
7.1ch PCM Dolby Digital
5.1ch*2
7.1ch
PCM*2
Dolby
TrueHD
DTS Digital DTS Digital
[DVD-V]: 5.1ch PCM
DTS Digital
Surround/
DTS-ES*6
[DVD-V]: 5.1ch
DTS Digital
Surround/
DTS-ES*5
Surround/
Surround/
DTS-ES
[BD-V]: 7.1ch PCM*4
[BD-V]: 7.1ch*4
Down-mixed
2ch PCM
DTS-ES*6
5.1ch
DTS-HD
High
DTS-HD High
Resolution Audio
Resolution
Audio
DTS Digital
Surround
DTS Digital
Surround
7.1ch PCM*4
7.1ch*4
DTS-HD
Master
Audio
DTS-HD Master
Audio
Down-mixed
Down-mixed
5.1ch PCM
Down-mixed
2ch PCM
Down-mixed
5.1ch*2
5.1ch
7.1ch LPCM
7.1ch PCM
7.1ch PCM
7.1ch
PCM*2
*1 When the connected equipment is not supported with these audio format, the audio is output as Dolby Digital bitstream, DTS Digital Surround
bitstream or down-mixed 2ch PCM (e.g., TV).
*2 [BD-V]: When playing BD-Video without secondary audio or clicking sound, the audio is output as the same format as if “BD-Video Secondary
Audio” was set to “Off”.
*3 When the connected equipment is not supported with multi channel surround, the audio is output as down-mixed 2ch PCM.
*4 [BD-V]: When the connected equipment is supported with 7.1 channel surround, the audio output is amplified from 5.1ch or 6.1ch to 7.1ch
depending on the DTS, Inc. specifications.
*5 With PCM output, Dolby Digital EX becomes PCM audio decoded as Dolby Digital, DTS-ES recorded to DVD-Video becomes PCM audio
decoded as DTS Digital Surround, and DTS-ES recorded to BD-Video becomes PCM audio decoded as DTS-ES.
*6 [BD-V]: When “BD-Video Secondary Audio” is set to “On”, Dolby Digital EX is output as Dolby Digital and DTS-ES is output as DTS Digital
Surround, however if playing BD-Video without secondary audio or clicking sound, the audio is output as the original format.
NECESSARY SETTINGS
≥HDMI AV OUT/DIGITAL AUDIO OUT terminal: “Digital Audio Output” (ꢁ30)
≥[BD80] 7.1ch AUDIO OUT/5.1ch AUDIO OUT terminal: “Digital Audio Output” and “Analog Audio Output” (ꢁ30, 31)
[Note]
≥When setting “BD-Video Secondary Audio” to “Off”, the clicking sound on the menu and audio with secondary video in picture-in-picture mode
(ꢁ19) cannot be output.
Regarding 24p output
Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials. However, they will normally be output in
60 frames/second in accordance with the display format.
These can be output in 24p as the original. Therefore, high-quality video can be enjoyed, such as the improved clarity, enhanced perspective, etc.
NECESSARY CONNECTIONS
≥Connect to a TV supporting 1080/24p input via an HDMI cable.
NECESSARY SETTINGS
≥“24p Output”: “On” (ꢁ31)
RQT9407
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing music
[CD] [MP3]
You can play generally available music CD or MP3 files recorded onto a DVD-R/R DL, CD-R/RW and USB device.
(About structure of folders ꢀ35, “Structure of folders that can play back on this unit”)
To switch from other menus to MP3 menu
(If the media contains data in different file
formats)
1) Press [FUNCTIONS].
2) Press [3, 4] to select “Menu” and press
[OK].
3) Press [3, 4] to select “Play Music
(MP3)” and press [OK].
1 Insert a disc or USB device. (ꢁ16)
e.g.
TIPS
CD
e.g.
([BD80])
≥If the media containing data in
different file formats is inserted,
Play Video (DivX)
the file selection menu may be
displayed. Press [3, 4] to select
“Play Music (MP3)” and press
[OK].
Play Pictures (JPEG)
Play Music (MP3)
Select an action or press RETURN.
OK
≥You can use search and skip functions.
(ꢁ17)
OPTION
RETURN
≥When the “Screen Saver Function” is set to
“On” (ꢁ30), the screen switches to Screen
Saver mode if there is no operation for 10
minutes after starting playback. (Playback
continues.)
2 Press [3, 4] to select the track and press [OK].
Play starts on the selected track.
≥[CD] “TR” and the track number being played back are displayed on the unit’s
display.
0.09
4.30
Music list
DIRECT NAVIGATOR
CD
e.g. [CD]
Track1
5 Tracks / Total Play Time 20min54sec
No.
Track Name
Play Time
4min30sec
3min41sec
4min30sec
3min11sec
5min 2sec
01
02
03
04
05
Track1
Track2
Track3
Track4
Track5
“
” indicates the
track currently
playing.
Play
OPTION
RETURN
[MP3] Playing a track in another folder
≥You cannot select folders that contain no
compatible tracks.
Selected folder No. /Total folders
If the folder has no track, “– –” is displayed
as folder number.
1 While the “Music list” is displayed
Press [OPTION], press [3, 4] to select
“Select Folder” and press [OK].
NOTE
TIPS
To return to the previous screen
Press [RETURN].
2 Press [3, 4] to select a folder and press
[OK].
DIRECT NAVIGATOR
CD(MP3)
Select Folder
e.g.
MP3 music
F
8/25
001 My favorite
002 Brazilian pops
003 Chinese pops
004 Czech pops
005 Hungarian pops
006 Liner notes
007 Japanese pops
008 Mexican pops
009 Philippine pops
010 Swedish pops
011 Momoko
The “Music list” for the folder appears.
012 Standard number
013 Piano solo
014Vocal
OK
RETURN
Playing music continuously even after turning off power to the television
When the unit is connected to a Panasonic TV (VIERA) that supports HDAVI Control 2 or
later and other device supports VIERA Link, the unit is turned off if the power to the
television is turned off, since “Power off link” (ꢁ28) operates.
The following operations make it possible to keep the power of the unit ON and to play
music continuously.
≥Sound may be discontinued for several
seconds when the power to the television is
turned off.
≥If the operation mentioned left is executed
while audio is output from the television,
the sound may not be output from the
device. It is recommended to set the device
beforehand so that audio will be output
from the device.
NOTE
1 While playing music
Press [OPTION].
2 Press [3, 4] to select “TV Power” and press [OK].
RQT9407
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing still pictures
[JPEG]
Playback of the BD-RE, DVD-RAM/R/R DL or CD-R/RW with still pictures recorded. This unit can also play still pictures recorded on the SD card
or USB memory. In addition, you can also connect Panasonic digital camera by USB connection.
(About structure of folders ꢀ35, “Structure of folders that can play back on this unit”)
1 Insert a disc, SD card or USB device. (ꢁ16)
Connecting a USB device
BD-RE, DVD-RAM
“Album View” screen is displayed
≥When the “Title View” screen is displayed, press the [G] button to switch to the
“Album View” screen.
ヴュチ
ヤモンュ
≥If the DVD-RAM containing both JPEG and AVCHD format is inserted, the file
selection menu may be displayed.
DVD-R/R DL, CD-R/RW, SD card, USB device
≥If the media containing data in different file formats is
inserted, the file selection menu may be displayed.
e.g.,
USB connection cable
Specified cable such as
accessory of the USB
equipment
Press [3, 4] to select “Play Pictures (JPEG)” and press
[OK].
e.g., [USB] ([BD80])
USB device
Connect to USB terminal
Play Video (DivX)
Play Pictures (JPEG)
Panasonic digital
camera, etc.
Play Music (MP3)
Select an action or press RETURN.
OK
OPTION
RETURN
≥Setup screen may be displayed on
equipment connected with the USB. Set it
to the mode for connecting to a PC.
≥Also read the operating instructions of the
connected equipment for details of
connection and setup.
“Picture View” screen is displayed
ꢂGo to step 3
NOTE
TIPS
2 Press [3, 4, 2, 1] to select the album and press [OK].
e.g.,
≥Do not disconnect the USB connection
cable while recognizing.
Picture View
DIRECT NAVIGATOR
DVD-RAM(VR)
Picture
Video
2006
9
12
0009
0004
≥Press [2, 1] to display the previous or
next still picture.
≥Press [:, 9] to show other pages.
0008
Page 001/001
Play
OPTION
RETURN
To return to the previous screen
Press [RETURN].
To exit the screen
3 Press [3, 4, 2, 1] to select the still picture and press [OK].
Press [DIRECT NAVIGATOR].
DVD-RAM/R/R DL, CD-R/RW, SD card,
USB device
To switch from other menus to JPEG
menu
(If the media contains data in different file
formats)
1) Press [FUNCTIONS].
2) Press [3, 4] to select “Menu” and press
[OK].
3) Press [3, 4] to select “Play Pictures
(JPEG)” and press [OK].
≥Small-sized still pictures are displayed with
a frame.
NOTE
RQT9407
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful functions during still picture play
Start Slideshow
Zoom out
You can display still pictures one by one at a constant interval.
This function is only available for small-sized still pictures.
1 While playing (except for slideshows)
BD-RE, DVD-RAM
1 While the “Album View” screen is displayed
Press [3, 4, 2, 1] to select the album and press [OPTION].
Press [OPTION].
2 Press [3, 4] to select “Zoom out” and press [OK].
2 Press [3, 4] to select “Start Slide Show” and press [OK].
≥To cancel “Zoom out”, press [3, 4] to select “Zoom in” in step 2
and press [OK].
≥The zoom-out information will not be stored.
≥You can also start slideshow by pressing [1] (PLAY) after
selecting the album.
DVD-R/R DL, CD-R/RW, SD card, USB device
1 While the “Picture View” screen is displayed
Press [OPTION].
To select the still pictures in another folder
BD-RE, DVD-RAM
To switch to another higher folder
2 Press [3, 4] to select “Start Slide Show” and press [OK].
To stop slideshow
(Only if there is a multiple number of higher folders recognizable)
Press [∫].
1 While the “Album View” screen is displayed
Press [OPTION].
2 Press [3, 4] to select “Select Folder” and press [OK].
Slideshow settings
Select Folder
In step 2 in Start Slideshow above,
1 Press [3, 4] to select “Slide Show Setting” and press [OK].
Change the Album folder to be accessed.
\JPEG\DCIM001
2 To change the display interval
Press [3, 4] to select “Display interval” and press [2, 1] to
select the interval (“Long”, “Normal” or “Short”).
≥When a still picture with large number of pixels is played, the
display interval may become longer. Even if the setting is
changed, the display interval may not become shorter.
Press [OK] to set.
3 Press [2, 1] to select the higher folder and press [OK].
DVD-R/R DL, CD-R/RW
1 While the “Picture View” screen is displayed
Press [OPTION].
To set display method
Press [3, 4] to select “Transition Effect” and press [2, 1] to
select “Fade”, “Motion” or “Random”.
“Fade”:
“Motion”:
Pictures are changed by fading out and fading in.
Pictures are changed by fading out and fading in,
while it is enlarged, reduced, or moved up or
down.
2 Press [3, 4] to select “Folder” and press [OK].
3 Press [3, 4] to select a folder and press [OK].
The “Picture View” screen for the folder appears.
“Random”: In addition to the “Motion”, pictures are changed
by various methods.
e.g.
Folder selection
021216_0026
DIRECT NAVIGATOR
CD(JPEG)
To repeat slideshow
Press [3, 4] to select “Repeat Play” and press [2, 1] to select
“On” or “Off”.
F
2/25
001
002
003
004
005
006
007
008
To listen to a BGM
The MP3 that is recorded on the USB device or the music CD
can be played back as BGM during the slideshow.
Press [3, 4] to select “Soundtrack” and press [2, 1] to select
“On” or “Off”.
009
010
103
104
105
OK
RETURN
≥You cannot search or skip on the music.
≥When the slideshow stops, the playback of the music also
stops.
≥When both the music CD and the USB device with MP3
recorded is inserted to this unit, the music CD has a priority to
be played back as BGM.
To show the picture properties
While playing
Press [STATUS] twice.
To select a folder
A folder to playback can be selected when a USB device with
MP3 recorded is connected to this unit.
Press [3, 4] to select “Soundtrack Folder” and press [OK], and
press [2, 1] to select folder.
e.g. JPEG on DVD-RAM
Shooting date
3 Press [3, 4, 2, 1] to select “Set” and press [OK].
Date 11.12.2007
Total
3/9
To exit, press [STATUS].
Rotate
1 While playing (except for slideshows)
Press [OPTION].
2 Press [3, 4] to select “Rotate RIGHT” or “Rotate LEFT” and
press [OK].
≥The rotation information will be stored until the unit is turned off
or the media is removed.
RQT9407
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing DivX® videos
[DivX] [BD80]
ABOUT DIVX VIDEO:
DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video.
You can play DVD-R/R DL, CD-R/RW discs and USB device which contain DivX video contents that have been recorded on a personal computer.
(About structure of folders ꢀ35, “Structure of folders that can play back on this unit”)
≥Because DivX format can use many different codecs, there is no guarantee that all DivX files will play. (ꢁ34, “About MP3/JPEG/
DivX files”)
≥The picture sizes set for recording
may prevent the unit from showing
pictures in the proper aspect. You
may be able to adjust the aspect
through the TV.
e.g.,
1 Insert a disc or a USB device. (ꢁ16)
NOTE
TIPS
e.g.,
≥If the disc containing data in different file
formats is inserted, the file selection menu
may be displayed. Press [3, 4] to select
“Play Video (DivX)” and press [OK].
CD
Play Video (DivX)
Play Pictures (JPEG)
Play Music (MP3)
≥Successive play is not possible.
≥You can use search and skip
functions. (ꢁ17)
≥Press [:, 9] to show other
pages.
Select an action or press RETURN.
OK
OPTION
RETURN
DVD-R/R DL, CD-R/RW, USB device
To switch from other menus to DivX
menu
(If the media contains data in different
file formats)
e.g.,
DIRECT NAVIGATOR
CD (DivX)
2 Press [3, 4] to select the title
and press [OK].
DivX
Name of Title
No.
001
ABC.divx
Play starts on the selected title.
1) Press [FUNCTIONS].
2) Press [3, 4] to select “Menu” and
press [OK].
3) Press [3, 4] to select “Play Video
(DivX)” and press [OK].
Play
RETURN
Folders can be selected from OPTION.
Page 01/01
OPTION
Playing a title in another folder
1 While the “DIRECT NAVIGATOR” is displayed
≥You cannot select folders that
contain no compatible files.
Press [OPTION], press [3, 4] to select “Folder” and press [OK].
e.g.,
DIRECT NAVIGATOR
CD (DivX)
Folder selection
NOTE
TIPS
Selected folder No. /Total folders
If the folder has no title, “– –” is displayed
as folder number.
F
1/21
12_02_2004
Image001
Image002
Image003
Image004
Image005
Image006
Image007
Image008
Image009
Image010
To return to the previous screen
Press [RETURN].
OK
RETURN
Page 01/01
2 Press [3, 4] to select a folder and press [OK].
The “DIRECT NAVIGATOR” for the folder appears.
Regarding DivX VOD content
ABOUT DIVX VIDEO-ON-DEMAND:
≥After playing DivX VOD content for the first time, another
registration code is then displayed in “DivX Registration”. Do not
use this registration code to purchase DivX VOD content. If you
use this code to purchase DivX VOD content, and then play the
content on this unit, you will no longer be able to play any content
that you purchased using the previous code.
This DivX® Certified device must be registered in order to play DivX
Video-on-Demand (VOD) content.
First generate the DivX VOD registration code for your device and
submit it during the registration process. [Important: DivX VOD
content is protected by a DivX DRM (Digital Rights Management)
system that restricts playback to registered DivX Certified devices. If
you try to play DivX VOD content not authorized for your device, the
message “Authorisation Error.” will be displayed and your content will
not play.]
Display the unit’s registration code.
(ꢁ32, “DivX Registration” in “General”)
≥
If you purchase DivX VOD content using a registration code different
from this unit’s code, you will not be able to play this content.
(“Authorisation Error.” is displayed.)
Regarding DivX VOD content that can only be played a
set number of times
Some DivX VOD content can only be played a set number of times.
When you play this content, the remaining number of plays is
displayed. You cannot play this content when the number of
remaining plays is zero. (“Rental Expired.” is displayed.)
DivX Registration
When playing this content
≥
The number of remaining plays is reduced by one if
–
–
you press [Í]
.
you press [ ].
∫
DivX® Video On Demand
– you press [DIRECT NAVIGATOR].
you press [ or [ ] etc. and arrive at another content or the
start of the content being played.
– you press [DRIVE SELECT] to change the drive.
Resume functions do not work.
8 alphanumeric
characters
Your registration code is : XXXXXXXX
–
:
]
6
,
5
≥
Displaying subtitles text
5 Press [3, 4] to select “Text”.
≥DivX video files that do not display “Text” do not contain
subtitles text.
You can display subtitles text onto the DivX video disc on this unit.
This function has no relation to the subtitles specified in DivX
standard specifications and has no clear standard. The operation
might be different or it may not operate properly depending on the
way the file was made or the state of this unit (playing, stopped,
etc.).
Subtitles text cannot be displayed.
≥If the subtitles text are not displayed correctly, try changing the
language settings. (ꢁ29)
1 While playing, press [DISPLAY].
To exit the screen
Press [DISPLAY].
2 Press [3, 4] to select “Disc” and press [1].
3 Press [3, 4] to select “Subtitle” and press [1].
4 Press [3, 4] to select “On” and press [1].
RQT9407
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying VIERA CASTTM
You can access a selection of Internet services from the Home screen with VIERA CAST, for example YouTube, Picasa Web Albums. (Current as
of February 2009)
≥VIERA CAST requires a broadband Internet connection. Dial-up Internet connections cannot be used.
≥Depending on the usage conditions, it may
take a while to read all the data.
≥The connection to the Internet may take
time or the Internet may not be connected
depending on the connection environment.
≥The unit is connected to the Internet when
VIERA CAST is used, generating
Preparation
≥Network connection (ꢀ 13)
≥Network setting (ꢀ 14)
NOTE
TIPS
1 Press [VIERA CAST].
≥Message is displayed. Please read these instructions carefully and then press
[OK] to start VIERA CAST function.
communication charges.
Welcome to Network Service
Your Panasonic Network Service allows you to access web-based content on your Player/Recorder.
Network Service is subject to change without notice. The Service through Network Service is operated by
their respective service providers, and service may be discontinued either temporarily or permanently
without notice. Therefore, Panasonic will make no warranty for the content or the continuity of the
services. All features of websites or content of the service may not be available. Some content may be
inappropriate for some viewers and may only be available for specific countries and may be presented in
specific languages. You may disable the Network Service feature by following the instructions found in
your Operating Instructions.
To return to VIERA CAST Home screen
Press [VIERA CAST].
To exit from VIERA CAST
Don’t show this message again
ENTER
Press [FUNCTIONS] or [TOP MENU/
DIRECT NAVIGATOR], then press
[RETURN] to cancel the menu.
It's recommanded your player/recorder is connected to Full HD display with HDMI. The display of the
contents may be truncated, depending on your TV. You may reduce to screen size by following the
instructions found in your Operating Instructions.
Images are for illustration purpose, message may
change without notice.
≥Set the “Network Lock” to “On” to restrict
using VIERA CAST. (ꢀ 32)
≥Set the “Audio Auto Gain Control” to “Off”
when the audio is warped while using the
VIERA CAST. (ꢀ 32)
≥When display of the contents is truncated,
set the “Reduced Screen Display” to “On”.
(ꢀ 32)
≥Set the “Time Zone” or “Summer Time”
when wrong time is displayed on the
screen. (ꢀ 32)
2 Press [3, 4, 2, 1] to select the item and press [OK].
≥You can operate VIERA CAST using the following buttons on the unit’s remote
control. [3, 4, 2, 1], [OK], [RETURN], [OPTION], colored buttons and
numbered buttons
≥To access more features on YouTube or Picasa Web Albums site, enter your user
ID and password that you have previously set up with these sites through the
internet on your PC. However, not all features may be accessible through VIERA
CAST.
VIERA CAST Home screen;
≥VIERA CASTTM home screen is subject to
change without notice.
After you access YouTube or Picasa
Web Albums from the VIERA CAST
Home screen and add your favorite
videos or albums to VIERA CAST, you
can choose them easily from the Home
screen.
≥The services through VIERA CASTTM are
operated by their respective service
providers, and service may be discontinued
either temporarily or permanently without
notice. Therefore, Panasonic will make no
warranty for the content or the continuity of
the services.
Settings
NOTE
TM
Web Albums
Panasonic Select
Featured Videos
≥All features of websites or content of the
service may not be available.
≥Some content may be inappropriate for
some viewers.
≥Some content may only be available for
specific countries and may be presented in
specific languages.
Images are for illustration purpose, contents may
change without notice.
Regarding “Settings”
Set VIERA CAST Home screen.
≥My Account:
≥Lock:
You can remove your account from the unit.
Enter a password to lock YouTube and Picasa Web Albums.
≥Notices
Showing FUNCTIONS menu
Some functions of this unit can be operated from the FUNCTIONS menu.
1 Press [FUNCTIONS].
e.g.,
≥Items to be displayed may vary with the media.
Blu-ray Disc Player
FUNCTION MENU
DVD-Video
2 Press [3, 4] to select the item and press [OK].
Top Menu
Menu
≥Playback
≥Top Menu
≥Menu
≥Viewing Picture
≥To Others
To Others
Network
SD card
“Playlists”:
You can play playlists created on
DVD-VR.
USB device
OK
RETURN
Press [3, 4, 2, 1] to select the
playlist and press [OK].
“Setup” (ꢀ 29)
“Card Management” (ꢀ 19)
≥Network
≥BD/DVD/CD
≥SD card
Displays Home screen of VIERA CAST (ꢁ above)
Switches to the disc drive.
Switches to the SD drive.
≥USB device
Switches to the USB drive.
RQT9407
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing settings with the on-screen menu
On-screen menu operations
e.g., BD-Video
1 Press [DISPLAY].
2 Press [3, 4] to select
the menu and press
[1].
≥Depending on the condition of the
unit (playing, stopped, etc.) and
media contents, there may be
some items that you cannot select
or change.
Disc
Play
Picture
Sound
Signal Type
Subtitle
NOTE
TIPS
Off
-
PiP
1ENG
-
Subtitle Style
Angle
3 Press [3, 4] to select
≥Some items can be changed by
pressing [OK].
the item and press [1]. Menus
4 Press [3, 4] to select
the setting.
Items
Settings
To exit the on-screen menu
Press [DISPLAY].
What you can change with the on-screen menu
Menus
Items
Signal Type
Settings and details
[BD-V]
Disc
≥Primary Video
Video:
The video recording method appears. (ꢀbelow, Video attribute)
Soundtrack: Select the type of audio or language. (ꢀbelow, Language, Audio attribute)
≥Secondary Video
Video:
Select on/off of images.
The video recording method appears. (ꢀbelow, Video attribute)
Soundtrack: Select on/off of audio and the language. (ꢀbelow, Language, Audio attribute)
Video
[AVCHD]
The video recording method appears. (ꢀbelow, Video attribute)
Soundtrack
[AVCHD] [DVD-V]
Select the type of audio or language. (ꢀbelow, Language, Audio attribute)
[DVD-VR] [MPEG2]
The audio attributes appear. (ꢀbelow, Audio attribute)
[DivX]
Select the soundtrack number.
≥Soundtrack numbers are displayed even when there is only one audio type.
Subtitle
[BD-V] [AVCHD] [DVD-V]
Turn the subtitle on/off and select the language. (ꢀbelow, Language)
[DVD-VR] (Only discs that contain subtitle on/off information)
Turn the subtitle on/off.
[DivX]
Turn the subtitle on/off and select “Text” or the subtitle number.
≥Subtitle number is displayed even if there are not multiple subtitles.
Subtitle Style
[BD-V]
Select the subtitle style.
Audio channel
Angle
[DVD-VR] [DivX] [MPEG2]
(ꢁ18, Changing audio during play)
[BD-V] [DVD-V]
Select the number of the angle.
Some items may be changed only on the disc specific menu. (ꢀ16)
Language
ENG: English
FRA: French
DEU: German
SVE: Swedish
NOR: Norwegian
DAN: Danish
POR: Portuguese
RUS: Russian
JPN: Japanese
CHI:
KOR: Korean
MAL: Malay
VIE:
THA: Thai
POL: Polish
Chinese
CES: Czech
SLK: Slovak
HUN: Hungarian
ITA:
Italian
Vietnamese
FIN:
¢:
Finnish
Others
ESP: Spanish
NLD: Dutch
Audio attribute
Video attribute
Signal type
MPEG-2/MPEG-4 AVC/VC-1
480/576/720/1080
Video recording method
Video Format
LPCM/
Digital/
Digital+/
DTS-HD
TrueHD/DTS/DTS 96
/
HI RES/DTS-HD MSTR/MPEG
24p/50i/60i/50p/60p
Video Frame rate
Color Space
ch (channel)
Number of channels
Sampling frequency
Number of bits
YCbCr4:2:2/YCbCr4:4:4/RGB
bps (bit per second)
k (kHz)
Transfer rate of bit
b (bit)
bps (bit per second)
Transfer rate of bit
RQT9407
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Menus
Items
Settings and details
Repeat Play
(Only when the elapsed time is being displayed on the unit’s display.)
Selects the item which you want to repeat. The items displayed differ depending on the type of media.
Play
≥All tracks
≥Chapter
≥Playlists
≥Title
≥One track
≥Off
All tracks
Chapter
Playlist
Title
Track
Select “Off” to cancel.
Random
[CD] [MP3]
While playing, press [3, 4] to select “On”.
Random playback starts from the next track.
≥On
≥Off
Playback
[BD-V] [DVD-V]
Information Window
[BD80]
Displays audio/video attribute information of disc (
), settings status of “Digital Audio Output” (ꢀ30)
(
) and HDMI output information ( ). (ꢀ26 Audio attribute, Video attribute)
*&/+
–Depending on the disc, display method may be different.
–The audio attribute information will be displayed following the "Digital Audio Output” settings. (ꢁ20)
Press [RETURN] to exit.
Mode
[BD-V] [AVCHD] [DVD-VR] [DVD-V] [DivX] [MPEG2]
Select the picture quality mode during play.
Picture
≥Normal:
≥Soft:
≥Fine:
Default setting
Soft picture with smoother video
Details are sharper
≥Cinema:
≥User:
Mellows movies, enhances detail in dark scenes.
You can make further adjustments. (ꢁbelow)
1 Press [1] to select “Picture Adjustment” and press [OK].
2 Select the item using [3, 4] and adjust it with [2, 1].
Contrast:
Brightness:
Sharpness:
Colour:
Gamma:
3D NR:
Increases the contrast between light and dark parts of the picture (j7 to i7).
Brightens the picture (0 to i15).
Adjusts the sharpness of the edges of the horizontal lines (j6 to i6).
Adjusts the shade of the picture’s color (j7 to i7).
Adjusts the brightness of dark portions of the screen (0 to i5).
Reduces the rough noise in the background to give a greater feeling of depth (0 to
When “24p Output” is set to “On”, this function may not operate. (ꢁ31)
i
4).
Integrated NR: Smooths block noise and reduces the smudging that appears around contrasting
sections of the picture (0 to i3).
Progressive
Select the method of conversion for progressive output to suit the type of material being played (ꢁ42,
Film and video).
≥Auto:
≥Video:
Automatically detects the film and video content, and appropriately converts it.
Select when using “Auto” and the content is distorted.
≥Film:
Select this if the edges of the film content appear jagged or rough
when “Auto” is selected.
However, if the video content is distorted as shown in the
illustration to the right, then select “Auto”.
24p [DVD-V]
≥On
≥Off
Only when you have selected “On” in “24p Output” (ꢁ31) and play discs recorded at a rate of 60 fields
per second.
Sound Effects*1, 2
≥Off
Sound
Re-master (ꢁ18)
≥Re-master 1
≥Re-master 2
≥Re-master 3
V. Surround
[BD-V] [AVCHD] [DVD-VR] [DVD-V] [DivX] [MPEG2] (2 channels or more only)
Enjoy a surround-like effect if you are using two front speakers only.
–Turn V. Surround off if it causes distortion.
–Do not use in combination with surround effects on other equipment.
–V. Surround does not work for bilingual recordings.
≥V. Surround 1
≥V. Surround 2
Night Surround
To enjoy a movie with powerful sound even when the volume is kept low at night, the audio is set in
such a way that it can be heard easily.
≥Night Surround
Dialog Enhancer*1
[BD-V] [AVCHD] [DVD-VR] [DVD-V] [DivX] [MPEG2] (3 channels or more only, including a center channel)
The volume of the center channel is raised to make dialog easier to hear.
≥On
≥Off
High Clarity Sound
[BD80]
When the analog video terminal is not being used, the electrical current that flows through the analog video
circuit can be stopped. This prevents adverse effects on the audio signals and produces clearer sound.
Use this when outputting image via HDMI terminal. Analog image will not be output via COMPONENT
VIDEO OUT terminal or VIDEO OUT terminal.
≥On
≥Off
Only when you have selected “Enable” in “High Clarity Sound” (ꢁ30)
*1 This function is effective for audio from the HDMI terminal or the DIGITAL AUDIO OUT terminal only when “Dolby D/Dolby D +/Dolby
TrueHD” or “DTS/DTS-HD” is set to “PCM”. (However, in this case, audio is output as 2ch from the DIGITAL AUDIO OUT terminal.)
*2 Not every function can be set individually.
RQT9407
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Linked operations with the TV
(VIERA Link “HDAVI ControlTM”)
What is VIERA Link “HDAVI Control”?
VIERA Link “HDAVI Control” is a convenient function that offers
linked operations of this unit, and a Panasonic TV (VIERA) or
other device under “HDAVI Control”.
Preparation
1) Connect this unit to your TV or other device with an HDMI cable
(ꢁ8, 9).
You can use this function by connecting the equipment with an
HDMI cable. See the operating instructions for connected
equipment for operational details.
≥VIERA Link “HDAVI Control”, based on the control functions
provided by HDMI which is an industry standard known as HDMI
CEC (Consumer Electronics Control), is a unique function that we
have developed and added. As such, its operation with other
manufacturers’ equipment that supports HDMI CEC cannot be
guaranteed.
2) Set “VIERA Link” to “On” (ꢁ31).
(The default setting is “On”.)
3) Set the “HDAVI Control” operations on the connected equipment
(e.g., TV).
4) Turn on all “HDAVI Control” compatible equipment and select this
unit’s input channel on the connected TV so that the “HDAVI
Control” function works properly.
Also when the connection or settings are changed, repeat
this procedure.
≥This unit supports “HDAVI Control 4” function.
“HDAVI Control 4” is the newest standard (current as of December,
2008) for Panasonic’s HDAVI Control compatible equipment. This
standard is compatible with Panasonic’s conventional HDAVI
equipment.
≥Please refer to individual manuals for other manufacturers’
equipment supporting VIERA Link function.
What you can do with “HDAVI Control”
Automatic input switching
Power off link
When the following operations are performed, the television will
automatically switch the input channel and display the
corresponding action.
All connected equipment compatible with “HDAVI Control”, including
this unit, automatically turns off when you switch the television off.
≥This unit automatically turns off even during playback or any
other operation.
–When play starts on the unit
About the Standby Power Save function
It is possible to minimize the stand-by power of this unit by the
Power off link, even if the “Quick Start” of this unit is set to “On”
(ꢁ32).
–When an action that uses the display screen is performed
(e.g., Direct Navigator screen)
≥[BD-V] [DVD-V] When playback stops, the TV will automatically
return to TV tuner mode.
≥“Standby Power Save” setting is required to be activated on the
TV.
≥When turning this unit on or off without using Power off link
function, it is impossible to minimize the stand-by power of this
unit.
Power on link
When the television is off and the following operations are
performed, the television will automatically turn on and display the
corresponding action.
–When play starts on the unit
–When an action that uses the display screen is performed
(e.g., Direct Navigator screen)
Playing music continuously even after turning off
power to the television (ꢁ21)
≥When [1] (PLAY) is pressed on this unit for “Automatic input
switching” or “Power on link”, the playback image is not
immediately displayed on the screen and it may not be
NOTE
possible to watch the contents from where playback started.
In this case, press [:] or [6] to go back to where
playback started.
Easy control only with VIERA remote control
If you connect this unit to a TV that has “HDAVI Control 2” or later
with an HDMI cable, you can operate this unit using buttons on the
TV remote control.
The buttons that you can use for this unit vary depending on the TV.
For details, refer to the operating instructions of the TV.
Use the remote control supplied with this unit if you cannot operate
this unit using buttons on the TV remote control.
Using the OPTION menu to
operate this unit
By using the TV remote control, you can play
discs using the “Control Panel” and display the
Top Menu (for BD-Video and DVD-Video) or
Pop-up Menu (for BD-Video).
1 Press [OPTION].
This can also be displayed by using the
VIERA menu screen.
e.g.,
Control Panel
Screen Aspect
Top Menu
Pop-up Menu
≥The operation of this unit may be interrupted when you press
incompatible buttons on the TV remote control.
OK
RETURN
OPTION
Using the FUNCTIONS menu to operate this unit
[Note] You cannot use the OPTION menu while the Top Menu
for BD-Video or DVD-Video is displayed.
2 Select an item, then press [OK].
By using the TV remote control, you can play
media using the FUNCTIONS menu.
e.g.,
Blu-ray Disc Player
FUNCTION MENU
1 Press the button for VIERA
DVD-Video
Link on the remote control.
Top Menu
Control Panel
Control Panel is displayed.
Follow the indications on the
screen.
2 Select the player.
Menu
≥The FUNCTIONS menu is displayed.
Screen Aspect
(ꢁ17)
To Others
Network
SD card
Top Menu [BD-V] [AVCHD] [DVD-V] Top menu is displayed.
Menu [DVD-V]
Menu is displayed.
USB device
Pop-up Menu [BD-V]
Rotate RIGHT [JPEG]
Rotate LEFT [JPEG]
Zoom in [JPEG]
Pop-up menu is displayed.
Rotate the still picture.
OK
RETURN
Enlarge or reduce the still
picture.
Zoom out [JPEG]
∫ When you want to leave the TV on and set only this unit to standby mode
Press [Í] on this unit’s remote control and set to standby mode.
∫ When not using “HDAVI Control”
RQT9407
Set “VIERA Link” in the Setup menu to “Off”. (ꢁ31)
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the unit’s settings
Change the unit’s settings if necessary. The settings remain intact even if you switch the unit to standby.
Setup menu operations
Setup
Disc
Picture
Sound
1
While stopped
Press [SETUP].
≥There may be differences in
operation methods. If this happens,
follow the on-screen instructions
for the operation.
NOTE
TIPS
2 Press [3, 4] to select the menu and
Display
press [OK].
TV / Device Connection
Network Settings
General
To return to the previous screen
Press [RETURN].
3 Press [3, 4] to select the item and
press [OK].
If there are any other items, repeat these steps.
4 Press [3, 4, 2, 1] to select the
To exit the screen
Press [SETUP].
OK
RETURN
option and press [OK].
Summary of settings
Underlined items are the factory presets.
“Disc”
DVD-Video Ratings
Set a ratings level to
limit DVD-Video play.
≥8 No Limit:
All DVD-Video can be played.
≥1 to 7:
Prohibits play of DVD-Video with corresponding
ratings recorded on them.
≥0 Lock All:
Prohibits play of all DVD-Video.
Follow the on-screen instructions. Enter a
Changing settings (When level 0 to 7 is selected)
≥Unlock Player
≥Change Level
4-digit password with the numbered buttons
when the password screen is shown. It will be
the common password for “DVD-Video
Ratings”, “BD-Video Ratings” and “Network
Lock”.
≥Change Password
≥Temporary Unlock
BD-Video Ratings
Set an age limit of
BD-Video play.
≥No Limit:
All BD-Video can be played.
≥0 to 254 year(s): Prohibits play of BD-Video with corresponding
ratings recorded on them.
≥Do not forget your password.
Changing settings (When 0 to 254 year(s) is selected)
≥Unlock Player
≥Change Level
≥Change Password
≥Temporary Unlock
Soundtrack
Preference
Choose the language for audio, subtitle and
disc menus.
≥English
≥Italian
≥German
≥Spanish
≥French
≥Original: The original language of each disc will be selected.
≥Other ¢¢¢¢
[BD-V] [DVD-V]
≥Some discs start in a certain language
despite any changes you make here.
Subtitle
Preference
≥Automatic:
≥When the selected language is not available
on the disc, the default language is played.
There are discs where you can only switch
the language from the menu screen. (ꢀ16)
≥Enter a code (ꢁ37) with the numbered
buttons when you select “Other ¢¢¢¢”.
If the language selected for “Soundtrack Preference” is not
available, subtitles of that language will automatically appear if
available on that disc.
≥English
≥Italian
≥German
≥Spanish
≥French
≥Other ¢¢¢¢
Menu Preference
≥English
≥Italian
≥German
≥Spanish
≥French
≥Other ¢¢¢¢
BD-Live Internet Access [BD-V] (ꢁ19)
You can restrict Internet access when BD-Live functions are used.
≥Permit:
Internet access is permitted for all BD-Live contents.
Internet access is permitted only for BD-Live
contents which have content owner certificates.
Internet access is prohibited for all BD-Live
contents without a certificate.
≥Limit:
≥Prohibit:
Internet access is prohibited for all BD-Live contents.
DivX Subtitle Text [DivX]
Select a suitable item according to the language used for DivX
subtitles text (ꢁ24).
≥Latin 1
≥Latin 2
≥Cyrillic
English, German, Spanish, etc.
Polish, Czech, Hungarian, etc.
Russian, etc.
≥This item is displayed only when pressing [SETUP] after playing back
a file.
“Picture”
Still Mode [BD-V] [AVCHD] [DVD-V]
Select the type of picture shown when you pause playback
(ꢁ42, Frames and fields).
≥Automatic
≥Field: Select if jittering occurs when “Automatic” is selected. (The
picture is coarser.)
≥Frame: Select if small text or fine patterns cannot be seen clearly
when “Automatic” is selected. (The picture is clearer and
finer.)
Seamless Play [DVD-VR]
Select the play mode between playlist chapter segments and partially
deleted titles.
≥On:
The chapters in playlists are played seamlessly. This does
not work while searching or when there are several audio
types included on the playlist. Additionally, the positioning of
chapter segments may change slightly.
≥Off:
The points where chapters in playlists change are played
accurately, but the picture may freeze for a moment.
NTSC Contents Output
Select PAL60 or NTSC output when playing NTSC discs.
≥NTSC: NTSC discs are played as NTSC.
≥PAL60: Select if picture is not displayed correctly when “NTSC” is
selected.
RQT9407
29
Download from Www.Somanuals.com. All Manuals Search And Download.
“Sound”
Dynamic Range Compression [BD-V] [AVCHD] [DVD-V] [DivX]
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
Change the dynamic range (ꢁ42) for late night viewing.
≥On
≥Off
≥Auto: Effective only when Dolby TrueHD is played.
Digital Audio Output (ꢁ20)
≥Press [OK] to show the following settings.
Dolby D/Dolby D +/
Dolby TrueHD
Select whether Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, DTS
Digital Surround, DTS-HD High
Resolution Audio or DTS-HD Master
Audio is output in “Bitstream” or
“PCM” format.
≥Bitstream:
Select “Bitstream” when the connected equipment can decode the
respective audio format.
–Connect equipment supporting HDMI (High Bit rate Audio) and use a
High Speed HDMI Cable in order to output high bit rate audio such as
Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio or
DTS-HD Master Audio.
DTS/DTS-HD
[Note]
≥PCM:
≥Not making the proper settings may
result in noise.
Select “PCM” when the connected equipment cannot decode the
respective audio format.
≥
If the unit is connected with the HDMI AV
OUT terminal, the specifications of the
connected equipment take preference
over this unit and audio selected in these
items may not be output (e.g., when a
television is connected, the HDMI audio
output of this unit is limited to
Refer to the operating instructions for connected devices to verify whether
or not they can decode each of the audio formats.
down-mixed 2ch.)
MPEG Audio
≥Bitstream:
When connected to equipment with a built-in MPEG
decoder.
≥PCM:
When connected to equipment without a built-in MPEG
decoder.
BD-Video Secondary Audio [BD-V]
Turn on/off the clicking sound on the menu and audio with
secondary video in picture-in-picture mode. (ꢁ19)
≥On:
The primary audio and secondary audio are mixed and output.
The sampling frequency is converted to 48 kHz.
The clicking sound on the menu and secondary audio are not
output.
≥Off:
PCM Down Conversion
≥On:
Signals are converted to 48 kHz. (Choose when the connected
equipment cannot process signals with sampling frequency of
96 kHz.)
Signals are output as 96 kHz. (Choose when the connected
equipment can process signals with sampling frequency of
96 kHz.)
Select how to output audio with a sampling frequency of 96 kHz.
≥Signals are converted to 48 kHz despite the settings across in the
following cases:
– when the signals have a sampling frequency of 192 kHz
– when the disc has copy protection
≥Off:
– when “BD-Video Secondary Audio” is set to “On”
Downmix
≥Stereo:
When connected to equipment that does not support
the virtual surround function.
Switch the downmix system for playing back multi-channel
surround sound.
≥When “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” is set
to “Bitstream”, there are no downmix effects for the outputted
audio.
≥Surround encoded: When connected to equipment that supports the
virtual surround function.
≥The audio will be outputted in “Stereo” in the following cases.
– AVCHD playback
– Playback of clicking sound on the menu and audio with
secondary video in picture-in-picture mode
High Clarity Sound [BD80]
≥Enable
≥Disable
When the analog video terminal is not being used, the electrical
current that flows through the analog video circuit can be stopped.
This prevents adverse effects on the audio signals and produces
clearer sound.
≥Set to “Enable” and then set “High Clarity Sound” on the
on-screen menu to “On”. (ꢁ27)
≥Use this when outputting image via HDMI terminal. Analog image
will not be output via COMPONENT VIDEO OUT terminal or
VIDEO OUT terminal.
“Display”
On-Screen Messages
≥Automatic
≥Off
Choose whether to show status messages automatically.
Screen Saver Function
≥On:
If there is no operation for 10 minutes or more, the displayed screen
switches to the other states automatically.
–When the Direct Navigator or FUNCTIONS menu is displayed, the
display returns to the screen saver mode.
–When CD or MP3 is played, the display returns to the screen saver
mode. (Playback continues.)
–When still pictures are shown (except for slideshow), the display returns
to the Direct Navigator screen.
This is to prevent burn-in on the screen.
≥When this is set to “On”, the masked-off area on the screen
becomes gray.
[Only when connecting with an HDMI cable or a component
video cable and “HDMI Video Format” (ꢁ31) is set to any other
mode than “576p/480p”, or “Component Resolution” (ꢁ31) is
set to “720p” or “1080i”]
≥Off
FL Display
Changes the brightness of the unit’s display.
≥Bright
≥Dim:
≥Automatic:
The display is dimmed.
The display is dimmed during playback and bright
except playback.
[BD80]
SD Card LED Control
Set the lighting method for the lamp on the SD card slot.
≥On
≥SD inserted:
≥Off
When this unit is turned on and SD card is inserted, the
lamp is lighted.
Software Licence
Information about the software used by this unit is displayed.
RQT9407
30
Download from Www.Somanuals.com. All Manuals Search And Download.
“TV/Device Connection”
TV Aspect
When connected to a 4:3 aspect television:
Set to match the type of television connected.
≥4:3 Pan & Scan: Video recorded for a widescreen is played as Pan & Scan
(unless prohibited by the producer of the disc). When playing
BD-Video, video is output as “4:3 Letterbox”.
≥
4:3 Letterbox:
Video recorded for a widescreen is played in the letterbox style.
When connected to a 16:9 widescreen television:
≥16:9:
Video recorded for 4:3 aspect screen is displayed as a 4:3
ratio image in the center of the screen.
Video recorded for 4:3 aspect screen is displayed as a
horizontally stretched 16:9 image.
≥16:9 full:
HDMI Connection
≥Press [OK] to show the following settings.
HDMI Video Mode
Select “On” when video is output from HDMI AV OUT
terminal.
≥
On:
Images are output from the HDMI terminal in the resolution set in “HDMI Video
Format”. Video from COMPONENT VIDEO OUT terminal is output as “576i/480i”.
Images are output in the resolution set in “Component Resolution”.
≥Off
HDMI Video Format§
The items supported by the connected devices are
indicated on the screen as “¢”. When any item without
“¢” is selected, the images may be distorted.
≥Automatic:
Automatically selects the output resolution best suited to the
connected television (1080p, 1080i, 720p or 576p/480p).
≥576p/480p
≥1080i
≥720p
≥1080p
– When outputting 1080p signal, we recommend using High Speed HDMI Cables
that have the HDMI logo (as shown on the cover) and are less than 5.0 meters to
prevent video distortion etc.
– When the unit is connected to an amplifier/receiver that does not support the
resolution set on the unit, the video cannot be output properly. In this case, use
the HDMI cable to connect the unit to the TV and then connect the unit to the
amplifier/receiver using a cable other than HDMI.
– To enjoy high definition video up-converted to 1080p, you need to connect the unit directly
to 1080p compatible HDTV (High Definition Television). If this unit is connected to an
HDTV through other equipment, it must also be 1080p compatible.
24p Output [BD-V] [DVD-V]
≥On:
Images in 24p are output in 24p as they are.
However,
–when video is being output at 24 frames, images from any other
terminal than the HDMI terminal may not be output properly.
–[BD-V]: when images other than 24p are played, images are output at
60p.
When this unit is connected to a TV supporting 1080/24p
output via an HDMI cable, this unit displays each frame at
1/24 second intervals – the same interval originally shot
with the film camera.
≥When playing DVD-Video, set to “On” and then set
“24p” in “Picture” (ꢁ27) to “On”
≥Off
HDMI Output Range
Effective when connected to a device that only supports
RGB output.
≥Standard:
≥Enhanced:
The video is output as it is.
When the black and white contrast of a video is low, the signal
is enhanced to reproduce clear video.
HDMI Audio Output
This setting selects whether or not to output audio from
HDMI.
≥On:
≥Off:
When the TV is connected to this unit using an HDMI cable, and this unit
is also connected to other devices, such as an amplifier/receiver using an
optical digital audio cable or a coaxial cable ([BD80]).
VIERA Link
≥On:
≥Off:
Select when you do not want to use “HDAVI Control”.
Set to use “HDAVI Control” function when connected with
an HDMI cable to a device that supports “HDAVI Control”.
Component Resolution§
This sets the video output resolution when using the
component video terminal.
≥576i/480i
≥720p
480i, 480p: When playing NTSC discs
576i, 576p: When playing PAL discs
≥576p/480p
≥1080i
Even if you select “720p” or “1080i”, the video output resolution is restricted to
“576p/480p” when DVD-Video discs, DivX and BD-Video discs recorded at a rate
of 50 field per second are output from the COMPONENT VIDEO OUT terminals.
Analog Audio Output [BD80]
When connected with AUDIO OUT terminals, you can set
the unit to output the best possible sound for your speakers.
≥2ch (Downmix) + 5.1ch:
When connecting to 2ch AUDIO OUT or 5.1ch
AUDIO OUT. (ꢁ33)
When connecting to 7.1ch AUDIO OUT. (ꢁ33)
≥7.1ch:
TV System
≥NTSC:
≥PAL:
Select when connecting to a NTSC television.
Select when connecting to a PAL or multi-system television.
Change the setting to match the equipment you are
connecting with.
≥If picture output is not smooth, change the setting.
≥When NTSC contents are played, they are outputted in
the signal format specified in the “NTSC Contents Output”,
irrespective of the settings here.
[For[Asia]
The default setting is “NTSC”.
§ In this unit, a P4HD (ꢁ42) video processor is used to provide video of optimal resolution to the connected TV.
RQT9407
31
Download from Www.Somanuals.com. All Manuals Search And Download.
“Network Settings”
IP Address / DNS Settings (ꢁ14)
≥Press [OK] to show the following settings.
Connection Test
IP Address Auto-Assignment
IP Address
— — — —
≥On
— — —. — — —. — — —. — — —
— — —. — — —. — — —. — — —
— — —. — — —. — — —. — — —
≥Off
Subnet Mask
Gateway Address
DNS-IP Auto-Assignment
Primary DNS
≥On
≥Off
— — —. — — —. — — —. — — —
— — —. — — —. — — —. — — —
Secondary DNS
Connection Speed Auto-Config
Connection Speed Setting
This is enabled only when “Connection Speed Auto-Config” is
turned “Off”.
≥On
≥10BASE Half Duplex
≥100BASE Half Duplex
≥Off
≥10BASE Full Duplex
≥100BASE Full Duplex
Proxy Server Settings (ꢁ15)
≥Press [OK] to show the following settings.
Initialize
≥Yes
≥No
Proxy Address
Proxy Port Number
Connection Test
(The initial setting is blank.)
(The initial setting is “0”.)
— — — —
Network Service (ꢁ25) (VIERA CAST)
≥Press [OK] to show the following settings.
Network Lock
You can restrict using VIERA CAST.
Follow the on-screen instructions. Enter a 4-digit password with
the numbered buttons when the password screen is shown. It will
be the common password for “DVD-Video Ratings”, “BD-Video
Ratings” and “Network Lock”.
≥On
≥Off
Changing settings (When “On” is selected)
≥Change Password
≥Do not forget your password.
Audio Auto Gain Control
≥On
≥Off
Volume that is different depending on the contents is adjusted
automatically to the standard volume while using the VIERA CAST.
≥Depending on contents, this function effect will not work.
≥Select “Off” when the audio is warped.
Reduced Screen Display
≥On
≥Off
The screen is displayed reduced so the displayed screen of the
VIERA CAST does not get truncated.
Time Zone
≥GMT -12 to +12
The initial setting is shown below.
By selecting the time zone, it is possible to set the unit’s time to
match your location.
≥Some VIERA CAST contents require the time zone to be set.
Set the time zone if necessary.
For Australia: “+10
For New Zealand: [BD80] “+10”, [BD60] “+12
For Asia: “+8
For Middle East: “+4
≥On ≥Off
”
”
”
”
Summer Time
Select “On” when using Daylight Saving time.
MAC Address (ꢁ14)
Displays the “MAC Address” of this unit.
“General”
Remote Control (ꢁ41)
Quick Start
≥Set Code 1 ≥Set Code 2 ≥Set Code 3
≥On ≥Off
Internal control unit will be powered when it is set to “On”, so contents of the
following will be different from the time it is set to “Off”.
≥Idle power consumption will increase. (about the power consumption
ꢁ43)
Speed of startup from standby mode is increased.
≥When the setting of “Standby Power Save” is enabled on the TV
that supports HDAVI Control 4, it will take longer to startup this
unit when the power supply of the TV is on standby mode even if
the “Quick Start” is set to “On”.
≥The cooling fan may turn slowly to prevent overheating of internal parts.
Easy Setting
≥Yes
≥No
You can execute the basic setting (“TV Aspect”, “Analog Audio
Output” [BD80] and “Quick Start”).
Default Settings
≥Yes
≥No
This returns all values in the Setup menu and the on-screen menu,
except for “Remote Control”, “IP Address / DNS Settings”, “Proxy
Server Settings”, “Network Service”, “DVD-Video Ratings” and
“BD-Video Ratings” to the default settings.
DivX Registration [DivX] (ꢁ24)
You need this registration code to purchase and play DivX Video-on-Demand (VOD) content.
Firmware Update (ꢁ13)
≥Press [OK] to show the following settings.
Automatic Update Check
≥On
≥Off
When this equipment remains connected to the Internet, it will
check for the latest firmware version when it is turned on and
you can update it if necessary.
Update Now
≥Yes
≥No
You can update the firmware manually.
RQT9407
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the speaker setting to suit your speakers [BD80]
When connecting to an amplifier/receiver to enjoy multi-channel surround sound, use the following settings on this unit if they cannot be set on
the amplifier/receiver.
The settings are effective when connecting to analog 7.1ch AUDIO OUT/5.1ch AUDIO OUT terminal.
Preparation
1 Set “Analog Audio Output” to “7.1ch” or “2ch (Downmix) + 5.1ch”.
ms
Delay time (
)
(ꢁ31)
0.0
A message is displayed.
2 Press [OK].
For optimum listening with 7.1/5.1-channel sound, all the speakers,
except for the subwoofer, should be the same distance from the
seating position.
If you have to place the center, surround and surround back
speakers closer to the seating position, adjust the delay time to
make up for the difference.
If either distance A or C is less than B (ꢂbelow) find the
difference in the relevant table and change to the recommended
setting.
Center (C)
ms
0.0
dB
L
R
C
Front (L)
Front (R)
0.0
dB
0.0
dB
0.0
ms
1 Press [3, 4, 2, 1] to select the delay time box (
press [OK].
) and
Complete
0.0
dB
0.0
Complete
Test
SW
Subwoofer
(SW)
Test
dB ms dB
2 Press [3, 4] to select the setting and press [OK].
LS
LB
RS
RB
0.0
0.0
0.0
5.1ch speaker
connection
7.1ch speaker connection
dB ms dB
0.0
0.0
0.0
Approximate room dimensions
§
C
C
C
: Actual
speaker
position
: Ideal
speaker
position
Surround back
(RB)
(LS)
Surround
(LB)
(RS)
L
C
R
L
R
SW
§ Surround back channel is enabled only when setting “Analog
Audio Output” to “7.1ch”.
A
A
B
B
C
SW
LS
RS
LS
RS
C
C
A B C
Speaker presence and size (
L
R
)
C
LS
LB
SW
RS
RS
RB
RB
LS
RS LB RB
: Primary
listening
distance
LB
LS
Set all the connected speakers individually.
1
2
Press [
Press [
3
3
, 4, 2, 1] to select the speaker icon and press [OK]
, 4] to select the setting and press [OK]
.
Circle of constant primary listening distance
.
Icon examples:
Surround speaker (LS)
A Center speaker
Difference
C Surround/Surround back
LS
LS
≥Large:
Select when
the speaker
supports
speakers
Setting
1.0 ms
Large
Small
No
Approx. 34 cm
Approx. 68 cm
Approx. 102 cm
Approx. 136 cm
Approx. 170 cm
Difference
Setting
2.0 ms Approx. 170 cm
3.0 ms Approx. 340 cm
4.0 ms Approx. 510 cm
5.0 ms
5.0 ms
low-frequency (under 100 Hz) reproduction.
Select when the speaker does not support
low-frequency reproduction.
≥Small:
10.0 ms
15.0 ms
In order to make an ideal listening environment, settings of speaker
sizes may be automatically adjusted.
For example, if the subwoofer is set to “No”, the front speakers will
automatically be set to “Large”. (In this case, we recommend
connecting a speaker that can reproduce bass below 100 Hz.)
dB
0.0
Channel balance (
)
1 Select “Test” and press [OK].
A test signal is output.
Front (L)_—)Center (C)_—)Front (R)_—)Surround (RS)
:
;
Surround (LS)(— Surround Back (LB) (— Surround Back (RB)
2 While listening to the test signal, press [3, 4] to adjust the
volume of each speaker
Front speakers: 0.0 to s6.0 dB
Center speaker, Surround/Surround Back speakers:
0.0 to s12.0 dB
3 Press [OK].
The test signal stops.
≥No signal is output for the subwoofer. To adjust its volume, play
something, then return to this screen to adjust to suit your taste.
To finish the speaker setting
Press [3, 4, 2, 1] to select “Complete” and press [OK].
RQT9407
33
Download from Www.Somanuals.com. All Manuals Search And Download.
About MP3/JPEG/DivX files
File format
MP3
JPEG
CD-R*1, CD-RW*1, DVD-R*1, 5, DVD-R DL*1, 5, USB
device
CD-R*1, CD-RW*1, DVD-RAM*2 DVD-R*1, 5, DVD-R DL*1, 5
BD-RE*3, SD card, USB device
,
Playable media
Extension
Files must have the extension “.mp3” or “.MP3”.
Files must have the extension “.jpg” or “.JPG”.
Picture resolution
between 34k34 and 8192k8192 pixels
(sub sampling is 4:2:2 or 4:2:0)
—
Compression rate
Sampling rate
Reference
32 kbps to 320 kbps
44.1 kHz/48 kHz
—
—
ID3 tags: version 1, 2.2, 2.3, 2.4
ID3 is a tag embedded in MP3 track to provide
information about the track.
JPEG conforming DCF*4 is supported.
Thawing Time: approx. 2 sec. (7M pixels)
≥MOTION JPEG and Progressive JPEG is not supported.
This unit supports the versions listed above but only
titles and the names of artists can be displayed.
≥If there is a large amount of still picture data etc.
within a MP3 file, play may not be possible.
File format
DivX [BD80]
Subtitles text file of DivX [BD80]:
CD-R*1, CD-RW*1, DVD-R*1, 5, DVD-R DL*1, 5, USB
device
CD-R*1, CD-RW*1, DVD-R*1, 5, DVD-R DL*1, 5, USB device
Playable media
File format
Extension
—
MicroDVD, SubRip, or TMPlayer
Files must have the extension “.DIVX”, “.divx”, “.AVI”
or “.avi”.
Files must have the extension “.SRT”, “.srt”, “.SUB”, “.sub”,
“.TXT”, or “.txt”
Picture resolution
Reference
between 32k32 and 720k576 pixels
—
≥Certified to the DivX Home Theater Profile.
Video
–Number of stream: Up to 1
–Codec: DIV3, DIV4, DIVX, DV50, DIV6
–FPS (Frame Per Second): Up to 30 fps
Audio
≥The DivX video file and subtitles text file are inside the same
folder, and the file names are the same except for the file
extensions.
If there are more than one subtitles text files inside the same
folder, they are displayed in the following order of priority:
“.srt”, “.sub”, “.txt”.
≥
–Number of stream: Up to 8
–Format: MP3, MPEG, Dolby Digital
–Multi channel: Dolby Digital is possible. MPEG
multi is 2 ch conversion.
≥GMC (Global Motion Compensation) is not
supported.
≥In the following situations, the subtitles cannot be displayed
as recorded. Furthermore, depending on the methods used
to create the file or the state of the recording, only parts of
the subtitles may be displayed, or the subtitles may not be
displayed at all.
– When special text or characters are included in the
subtitles text.
– When the file size is larger than 256 KB.
–
When characters with specified styling are included in the
subtitle data.
–Codes that specify the character style within files are
displayed as subtitle characters.
–When data with a different format exists within the subtitle
data.
≥If the file name of the DivX video file is not displayed
correctly on the menu screen (the file name is displayed as
“_”), the subtitles text may not be displayed correctly.
≥Depending on the disc, the subtitles text cannot be displayed
when search and other such operations are being
performed.
≥English alphabet and Arabic numerals are displayed correctly. Other characters may not be displayed correctly.
≥The display order on this unit may differ from how the order is displayed on a computer.
≥Depending on how you create the media (writing software), files and folders may not play in the order you numbered them.
≥Depending on how you create the structure of folders (writing software), files and folders may not play. (ꢁ35)
≥This unit is not compatible with packet-write format.
≥Depending on the recording conditions, the media may not play.
≥Operation may take time to complete when there are many files and/or folders and some files may not display or be playable.
*1 ISO9660 level 1 or 2 (except for extended formats), Joliet
This unit is compatible with multi-session.
This unit is not compatible with packet writing.
*2 Discs must conform to UDF 2.0.
*3 Discs must conform to UDF 2.5.
*4 Design rule for Camera File system: unified standard established by Japan Electronics and Information Technology Industries Association
(JEITA).
*5 Discs must conform to UDF bridge (UDF 1.02/ISO9660).
This unit is not compatible with multi-session.
The default session only is played.
RQT9407
34
Download from Www.Somanuals.com. All Manuals Search And Download.
∫ Structure of folders that can play back on this unit
Structures of still picture (JPEG) folders
You can play files on this unit by structure of folders as shown
below. However depending on the method of writing data
(writing software), play may not be in the order you numbered
the folders.
in DVD-R/DVD-R DL/CD-R/CD-RW
Files inside a folder are displayed in the order they were updated
or taken.
Root
e.g.,
: Folder which can be displayed with this unit
P0000001.jpg
P0000002.jpg
¢¢¢: Numbers
XXX: Letters
Folder A
*1 ¢¢¢: from 001 to 999
*2 ¢¢¢: from 100 to 999
XXX: up to 5 figures
*3 ¢¢¢¢: from 0001 to 9999
P0000003.jpg
P0000004.jpg
P0000005.jpg
Folder B
P0000006.jpg
P0000007.jpg
P0000008.jpg
Structure of MP3 folders in DVD-R/DVD-R DL/CD-R/CD-RW/
USB device
Prefix the file names with 3-digit numbers in the order you want to
play them.
FolderPC0000009.jpg
P0000010.jpg
P0000011.jpg
P0000012.jpg
Root
e.g.,
in BD-RE/DVD-RAM
≥Folder structure is not displayed.
001XXXX.mp3
002XXXX.mp3
Folder A
Root
e.g.,
003XXXX.mp3
004XXXX.mp3
005XXXX.mp3
P0000001.jpg
P0000002.jpg
JPEG
Folder B
*1
DCIM
XXXXX
006XXXX.mp3
007XXXX.mp3
008XXXX.mp3
009XXXX.mp3
*2
*3
XXXX.JPG
Folder C
010XXXX.mp3
011XXXX.mp3
012XXXX.mp3
DCIM
*2
XXXXX
Structure of DivX [BD80] folders in DVD-R/DVD-R DL/CD-R/
CD-RW/USB device
*3
XXXX.JPG
Files inside a folder are displayed in the order they were updated
or taken.
in SD card/USB device
Displays JPEG files in all folders.
≥Folder structure is not displayed.
Root
e.g.,
P0000001.divx
P0000002.divx
Folder A
Root
e.g.,
P0000003.divx
P0000004.divx
P0000005.divx
P0000001.jpg
P0000002.jpg
Folder B
DCIM
P0000006.divx
P0000007.divx
P0000008.divx
P0000009.divx
*2
XXXXX
XXXX.JPG
*3
Folder C
P0000010.divx
P0000011.divx
P0000012.divx
Folder A
P0000003.jpg
P0000004.jpg
RQT9407
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages
The following messages or service numbers appear on the television or unit’s display when something unusual is detected during startup and
use.
On the television
Page
Authorisation Error.
This unit is not authorised to
play this title.
≥[DivX]: You are trying to play the DivX VOD content that was purchased with a different
registration code. You cannot play the content on this unit.
24
Cannot play.
≥You inserted an incompatible disc.
6, 7
Cannot play on this unit.
≥You tried to play a non-compatible image.
≥Confirm “SD” on the unit’s display is not blinking and re-insert the card.
7, 34
—
No disc is inserted.
Rental Expired.
≥The disc may be upside down.
—
24
≥[DivX]: The DivX VOD content has zero remaining plays. You cannot play it.
$ This operation is not
≥Some operations are unsupported by the unit. For example;
available.
17
17
–[BD-V]: During play back, reverse slow-motion or reverse frame-by-frame is not possible.
$ This operation is prohibited ≥Depending on the disc, you may not be able to perform search or skip when film previews
by this disc.
and warning screens are being played back.
Cannot connect.
Please check the connection of
the LAN cable.
≥When a hub is used but its Link lamp does not light up, check the cable connection, LAN
terminal connection, cable itself (a cross cable may be used by mistake), etc.
13
14
13
IP address is not set.
≥The “IP Address” in “IP Address / DNS Settings” is “---. ---. ---. ---“. Set the “IP Address”,
“Subnet Mask”, and “Gateway Address“. (Select the automatic address acquisition if
necessary.)
Cannot obtain IP address.
Please check the connection or
setting of the router.
≥If you use a hub, then check the connection between the hub and the router.
– Use the UPLINK port of the hub to connect to a router.
– Check whether or not the hub’s Link lamp lights up. If it does not light up, then check the
cable connection, LAN terminal connection, cable itself (a cross cable may be used by
mistake), etc.
≥If the above conditions are OK, then the router may not operate in DHCP mode. Check the
router settings and operation. You may reset the router to restore it to normal.
13
—
This IP address is already in
use.
Please check the setting.
≥This unit’s IP address is used by another device. Check the IP addresses of this unit,
personal computers, and routers, etc. If necessary, reconfigure them to avoid IP
addresses from being duplicated.
Connection test could not be
conducted.
≥Turn the unit off. Remove the AC mains lead and reconnect it and try again. If the same
symptom persists, then consult your dealer.
—
IP address is not set correctly.
Connection test was
unsuccessful. No reply from
Gateway. Please check the
connection or setting of the
router.
≥If you use a hub, then check the connection between the hub and the router.
– Use the UPLINK port of the hub to connect to a router.
– If the hub’s Link lamp does not light up, then check the cable connection, LAN terminal
connection, cable itself (a cross cable may be used by mistake), etc.
≥Check the “IP Address”, “Subnet Mask”, and “Gateway Address” in the “IP Address / DNS
Settings”.
13
14
14
≥If the MAC address information is required, then press [SETUP] to display the “Network
Settings” menu.
Network connection was
rejected.
Please confirm Setup “BD-Live
Internet Access”.
≥When you set “BD-Live Internet Access” to “Limit” and play BD-Live contents which do not
have a content owner certificate, the Internet access of the content is not allowed. If you
allow the content to connect to Internet, set “BD-Live Internet Access” to “Permit”.
29
Could not check for latest
firmware version.
≥The firmware download server is currently unavailable. Please try again later.
—
Please try again later.
High Clarity Sound is effective. ≥[BD80] “High Clarity Sound” in setup menu is set to “Enable”, and “High Clarity Sound” in
Analog video output is turned
off when playback starts.
27, 30
on-screen menu is set to “On”.
RQT9407
36
Download from Www.Somanuals.com. All Manuals Search And Download.
On the unit’s display
Page
F99
≥The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit to standby
for 3 seconds. Now press [Í/I] on the main unit again to turn the unit on.
—
HDMI ONLY
NET
≥Some BD-Video discs can only be output with HDMI.
≥Displays while VIERA CAST is starting up.
—
—
29
—
—
No PLAY
No READ
PLEASE WAIT
≥There is a viewing restriction on a BD-Video or DVD-Video.
≥The media is dirty or badly scratched. The unit cannot play.
≥The unit is carrying out internal process.This is not a malfunction. You cannot operate the
unit while “PLEASE WAIT” is displayed.
≥When connected to TV (VIERA) with HDAVI Control 4, and power supply is turned off by
the “Intelligent Auto Standby” function on the TV side.
—
REMOVE
≥The USB device is drawing too much power. Remove the USB device.
16
41
SET
≥The remote control and main unit are using different codes. Change the code on the
remote control.
(“ ” stands for a number.)
Press and hold [OK] and the indicated number button at the same
time for more than 5 seconds.
UNFORMAT
UNSUPPORT
U59
≥You inserted an unformatted DVD-RAM, DVD-RW, +RW, an unused +R, +R DL or
DVD-RW (DVD-Video format).
—
≥You have inserted a media the unit cannot play.
≥You tried to operate with a non-compatible USB device.
6, 7
7
≥The unit is hot.
—
The unit switches to standby for safety reasons. Wait for about 30 minutes until the
message disappears.
Select a position with good ventilation when installing the unit. Do not block the cooling fan
on the rear of the unit.
U72
U73
≥The HDMI connection acts unusually.
—
–The connected equipment is not HDMI compatible.
–Please use HDMI cables that have the HDMI logo (as shown on the cover).
–The HDMI cable is damaged.
H or F
≥There is something unusual. (The service number displayed after H and F depends on the
unit’s condition.)
—
≥Check the unit using the troubleshooting guide. If the service number does not disappear,
38–41
do the following.
1
Disconnect the plug from the household mains socket wait a few seconds, then
reconnect it.
2
Press [Í/I] to turn the power on. (The unit may be fixed.)
If the service number does not disappear despite doing the above, request service from
the dealer. Inform the dealer of the service number when requesting service.
START
UPD/
FINISH
≥The system is being restarted during the firmware update. Please do not turn off power.
≥The firmware is being updated.
13
13
13
≥The firmware update is complete.
Language code list
Enter the code with the numbered buttons.
Abkhazian:
Afar:
6566 Catalan:
6765 Gujarati:
9072 Hausa:
6779 Hebrew:
7282 Hindi:
7185 Lingala:
7265 Lithuanian:
7387 Macedonian:
7273 Malagasy:
7285 Malay:
7678 Rhaeto-Romance:
Tamil:
8465
6565 Chinese:
6570 Corsican:
8381 Croatian:
6577 Czech:
6582 Danish:
7289 Dutch:
6583 English:
6589 Esperanto:
6590 Estonian:
6665 Faroese:
6985 Fiji:
7684
8277 Tatar:
8279 Telugu:
8285 Thai:
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Afrikaans:
Albanian:
Amharic:
Arabic:
7775 Romanian:
7771 Russian:
7783 Samoan:
7776 Sanskrit:
6783 Hungarian:
6865 Icelandic:
7876 Indonesian:
6978 Interlingua:
6979 Irish:
8377 Tibetan:
8365 Tigrinya:
7383 Malayalam:
7378 Maltese:
7365 Maori:
Armenian:
Assamese:
Aymara:
7784 Scots Gaelic: 7168 Tonga:
7773 Serbian:
8382 Turkish:
7165 Marathi:
7384 Moldavian:
7465 Mongolian:
7487 Nauru:
7782 Serbo-Croatian: 8372 Turkmen:
Azerbaijani:
Bashkir:
6984 Italian:
7779 Shona:
7778 Sindhi:
8378 Twi:
8368 Ukrainian:
8373 Urdu:
7079 Japanese:
7074 Javanese:
7073 Kannada:
7082 Kashmiri:
7089 Kazakh:
7176 Kirghiz:
7565 Korean:
6869 Kurdish:
6976 Laotian:
7576 Latin:
Basque:
7865 Singhalese:
7869 Slovak:
7879 Slovenian:
7982 Somali:
Bengali; Bangla:
Finnish:
7578 Nepali:
8375 Uzbek:
8376 Vietnamese:
8379 Volapük:
6983 Welsh:
8385 Wolof:
8387 Xhosa:
8386 Yiddish:
8476 Yoruba:
8471 Zulu:
6678 French:
6890 Frisian:
6672 Galician:
6682 Georgian:
6671 German:
7789 Greek:
7583 Norwegian:
7575 Oriya:
Bhutani:
Bihari:
7589 Pashto, Pushto: 8083 Spanish:
Breton:
7579 Persian:
7585 Polish:
7065 Sundanese:
8076 Swahili:
8084 Swedish:
8065 Tagalog:
8185 Tajik:
Bulgarian:
Burmese:
7679 Portuguese:
7665 Punjabi:
Byelorussian: 6669 Greenlandic:
Cambodian:
7577 Guarani:
7178 Latvian, Lettish: 7686 Quechua:
RQT9407
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the chart
do not solve the problem, consult your dealer for instructions.
The following do not indicate a problem with this unit:
≥Regular disc rotating sounds.
≥Image disturbance during search.
To reset this unit
Page
To restore the unit if it freezes
due to one of the safety
devices being activated
≥Press and hold [Í/I] on the main unit for 3 seconds. (The settings remain unchanged.)
—
To return all settings other than ≥Select “Yes” in “Default Settings” in the Setup menu.
32
—
This returns all values in the Setup menu and the on-screen menu, except for “Remote
Control”, “IP Address / DNS Settings”, “Proxy Server Settings”, “DVD-Video Ratings”,
“BD-Video Ratings” and “Network Service” to the default settings.
some settings to the factory
preset
To return to the factory preset
(No setting)
≥Reset the unit as follows:
1
2
Press [Í/I] on the unit to turn off the unit.
Press and hold [;] and press [Í/I] and [< OPEN/CLOSE] on the unit at the same time
for more than 5 seconds until “HELLO” is displayed on the unit.
The power is turned on and then turned off automatically.
3
Power
No power.
≥Insert the AC mains lead securely into a household mains socket.
10
The unit switches to standby mode.
≥One of the unit’s safety devices is activated. Press [Í/I] on the main unit to turn the unit on.
—
—
Power of this unit is turned off
when the input for the TV is
switched.
≥If connected with an HDAVI Control 4 compatible TV (VIERA) with the “Intelligent Auto
Standby” setting activated on the TV, when switching the TV input, the unit will be
automatically turned to standby. For details please read the operating instructions of the TV.
Operation
Cannot operate the television
or amplifier/receiver.
The remote control doesn’t
work properly.
12
≥Change the manufacturer code of the remote control. In
some cases, even if you change the code, the remote
control may not be operated depending on the type of the
televisions or amplifier/receivers.
12, 41
41
≥It may be necessary to set the manufacturer code or the remote control code again after
changing the batteries for remote control.
≥The remote control and main unit are using different codes. Change the code on the remote
control.
Press and hold [OK] and the indicated number button at the same time for more than 5
seconds.
≥The batteries are depleted. Replace them with new ones.
≥You are not pointing the remote control at the main unit’s remote control signal sensor during
operation.
≥Colored glass may obstruct the signal reception/transmission.
Don’t place the signal sensor in direct sunlight or in areas that may be subject to sunlight exposure.
5
5
—
—
≥
The unit is on but cannot be
operated.
≥Confirm the correct drive is selected.
16
—
37
—
≥Some operations may be prohibited by the disc.
≥The unit is hot (“U59” appears on the display). Wait for “U59” to disappear.
≥One of the unit’s safety devices may have been activated.
Reset the unit as follows:
1
Press [Í/I] on the main unit to switch the unit to standby.
If the unit doesn’t switch to standby, press and hold [Í/I] on the main unit for about 3
seconds. The unit is forcibly switched to standby.
Alternatively, disconnect the AC mains lead, wait one minute, then reconnect it.
Press [Í/I] on the main unit to switch it on. If the unit still cannot be operated, consult the
dealer.
2
≥Condensation has formed. Wait 1 to 2 hours for it to evaporate.
—
Play fails to start even when
[1] (PLAY) is pressed.
Play starts but then stops
immediately.
≥Insert the disc correctly with the label facing up.
≥The disc is dirty.
≥You tried to play a blank disc or unplayable disc on this unit.
≥[DivX] If playing DivX VOD content, refer to the homepage where you purchased it.
16
3
6, 7
24
Cannot eject disc.
≥The unit may have a problem. While the unit is off, press and hold [;] and [< OPEN/
CLOSE] on the main unit at the same time for about 5 seconds. Remove the disc and consult
the dealer.
—
Startup is slow.
≥Make sure that “Quick Start” is set to “On”. If connected with an HDAVI Control 4 compatible
TV (VIERA) with the “Standby Power Save” setting activated on the TV, even with “Quick
Start” set to “On”, when the TV is in standby mode, the unit may take some time to startup.
≥Startup takes time in the following situations.
32
—
It takes time before play starts.
– Immediately after a power failure or the AC mains lead is connected.
– When the unit is connected with an HDMI cable.
≥[DivX] This is normal on DivX video.
—
Cannot set “On” in “24p
Output”.
≥
Only when the unit is connected to the HDMI terminal of a TV supporting 24p you can select “On”. In
some cases where the unit is connected to a TV via an amplifier/receiver through the HDMI terminals,
you may not be able to select “On”. In this case, connect the unit to a TV through the HDMI terminal and
connect it to the amplifier/receiver through any terminal other than HDMI.
31
RQT9407
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Displays
The display is dim.
Page
30
≥Change “FL Display” in the Setup menu.
The elapsed time displayed is
actually less than the play time.
≥The displayed play time is converted from the number of frames at 29.97 frames (equal to
0.999 seconds) to one second. There will be a slight difference between the time displayed
and the actual elapsed time (e.g., actual one-hour elapsed time may display as
approximately 59 minutes 56 seconds).
—
TV screen and video
The images from this unit do
not appear on the television.
≥Make sure that the television is connected to the VIDEO OUT terminal, COMPONENT
VIDEO OUT terminals or HDMI AV OUT terminal on this unit.
≥Make sure that the television’s input setting (e.g., AV 1) is correct.
8, 9
—
≥
An incorrect resolution is selected in “Component Resolution”, when the television is connected to
COMPONENT VIDEO OUT terminals. While stopped, press and hold [ and [ ] (PLAY) on the
main unit at the same time for more than 5 seconds to cancel this setting. Set the item again.
31
Picture is distorted.
∫
]
1
≥If “24p Output” is set to “On” when the unit is connected to a TV through any terminal other
than HDMI, images may not display properly. In this case, set “24p Output” to “Off”.
≥The unit and television are using different video systems. While stopped, keep pressing [∫]
and [< OPEN/CLOSE] on the main unit for 5 or more seconds. The system switches from
PAL to NTSC or vice versa.
31
—
≥The system used on the disc doesn’t match your television.
–PAL discs cannot be correctly viewed on an NTSC television.
–This unit can convert NTSC signals to PAL60 for viewing on a PAL television (“NTSC
Contents Output” in the “Picture”).
—
29
≥[DivX] Images may not be output due to how files were created.
—
—
Played back image is distorted ≥High definition video (transfer rate of 18 Mbps or faster) cannot be played back correctly if it
was recorded on a DVD compatible to double speed or slower.
or does not playback correctly.
([AVCHD])
Picture stops.
≥[DivX] Picture may stop if the DivX files are greater than 2 GB.
—
The screen changes
automatically.
≥When the “Screen Saver Function” in the Setup menu is set to “On”, the display may return to
the screen saver mode automatically if there is no operation for 10 minutes or more.
30
≥An image is not output from the COMPONENT VIDEO OUT terminal or the VIDEO OUT
terminal when the “High Clarity Sound” is enabled. Set the “High Clarity Sound” in the
on-screen menu to “Off” to use the COMPONENT VIDEO OUT terminal or the VIDEO OUT
terminal.
27
Video is not output.
Video is not output in high
definition.
≥High definition video cannot be output through the VIDEO OUT terminal.
≥Confirm that the “HDMI Video Mode”, “HDMI Video Format”, and “Component Resolution” in
the Setup menu are set properly.
≥The video output resolution is restricted to “576p/480p” when DVD-Video discs, DivX and
BD-Video discs recorded at a rate of 50 field per second are output from the COMPONENT
VIDEO OUT terminals.
—
31
—
Status messages do not appear.
≥Select “Automatic” in “On-Screen Messages” in the Setup menu.
30
The 4:3 aspect ratio picture
expands left and right.
≥Use the television to change the aspect. Refer to your television’s operating instructions.
≥When using a component video cable, set “Progressive” to “Video”. If the situation is not
restored after that, set “TV Aspect” to “4:3 Pan & Scan”.
—
27, 31
Screen size is wrong.
There is a lot of after-image
when playing video.
≥Turn “3D NR” or “Integrated NR” off if it is on.
27
—
There is no apparent change in ≥The effect is less perceivable with some types of video.
picture quality when adjusted
with the “Picture” menu in the
on-screen menu.
The masked-off area is masked ≥If the “Screen Saver Function” in the Setup menu is set to “Off”, the masked-off area is
30
34
displayed in black.
in gray.
Still pictures (JPEG) do not
playback normally.
≥The images that were edited on the PC, such as Progressive JPEG, etc., may not playback.
RQT9407
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound
Page
No sound.
Low volume.
Distorted sound.
Cannot hear the desired audio
type.
≥Check the connections and the “Digital Audio Output” settings. Check the input mode on the
amplifier/receiver if you have connected one.
8–10, 30
≥Press [AUDIO] to select the audio.
18
27
≥Turn off “V. Surround” in the following cases.
– When using discs that do not have surround sound effects such as Karaoke discs.
– When playing bilingual broadcast programs.
≥[BD80] When the unit is connected to an amplifier/receiver with the AUDIO OUT terminal, set
“Analog Audio Output” and match multi channel speaker settings. If these are not set
properly, the audio is not output correctly.
≥[BD80] When connected to an amplifier/receiver or any other devices using both AUDIO OUT
terminal and HDMI AV OUT terminal, the audio from AUDIO OUT terminal may not be output
with the desired audio depending on the specifications of the connected devices, etc. Set
“HDMI Audio Output” to “Off”, when you output multi-channel surround sound from AUDIO
OUT terminal.
31, 33
31
≥The sound effects (Re-master, V. Surround, etc.) will not work when the bitstream signal is
output from the HDMI AV OUT terminal or the DIGITAL AUDIO OUT terminal.
≥[DivX] Audio may not be output depending on how files were created.
—
—
Cannot switch audio.
≥There are discs for which audio cannot be changed because of how the disc was created.
≥When connecting an amplifier/receiver using a coaxial cable ([BD80]), optical digital audio
cable or an HDMI cable, you cannot switch the audio if “Dolby D/Dolby D +/Dolby TrueHD” or
“DTS/DTS-HD” is set to “Bitstream”. Set “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/
DTS-HD” to “PCM” or connect using AUDIO OUT terminal.
—
9, 10, 30
HDMI connections
The images from this unit do
not appear on the television.
≥
An incorrect resolution is selected in “HDMI Video Format”, when the television is connected to HDMI
AV OUT terminals. While stopped, press and hold [ and [ ] (PLAY) on the main unit at the same
time for more than 5 seconds to cancel this setting. Set the item again. However, Dolby Digital Plus,
Dolby TrueHD, and DTS-HD audio are not output in bitstream. To output the bitstream, select
“Default Settings” to restore the factory presets and make proper settings.
32
∫
]
1
Picture is distorted.
Jittering occurs.
≥To output video from a device connected with an HDMI cable, set “HDMI Video Mode” to “On”
in the Setup menu.
≥Picture may not be seen when more than 4 devices are connected with HDMI cables.
Reduce the number of connected devices.
≥When “24p Output” is set to “On”, HDMI authentication takes place where 24p images switch
to other images, and a black screen is displayed.
≥When “24p Output” is set to “On”, jittering may occur while playing DVD-Video. In this case,
turn “24p Output” to “Off”.
31
—
31
31
The 4:3 aspect ratio picture
expands left and right.
≥Change “TV Aspect” type to “16:9”.
31
31
Screen size is wrong.
When playing DVD-Video using ≥When you use the HDMI AV OUT terminal for video output, follow the steps below for setting.
progressive output, one part of
the picture momentarily
1
2
Connect this unit to the TV with any cable except the HDMI cable.
When you connect with the Component Video cable, set “HDMI Video Mode” to “Off” and
“Component Resolution” to “576i/480i” in the Setup menu.
appears to be doubled up.
No sound.
Low volume.
Distorted sound.
Cannot hear the desired audio
type.
≥Audio may not be heard when more than 4 devices are connected with HDMI cables.
Reduce the number of connected devices.
≥The sound effects will not work when the bitstream signal is output from the HDMI AV OUT
terminal or the DIGITAL AUDIO OUT terminal.
≥To output audio from a device connected with an HDMI cable, set “HDMI Audio Output” to
“On” in the Setup menu.
≥Depending on the connected equipment, the sound may be distorted if this unit is connected
with an HDMI cable.
≥When “BD-Video Secondary Audio” is set to “On”, Dolby Digital Plus, Dolby TrueHD, and
DTS-HD are converted to 48 kHz Dolby Digital or DTS Digital Surround and output. LPCM
7.1 channel audio is converted to 5.1 channel audio. In this case, set the “BD-Video
Secondary Audio” to “Off”.
—
—
31
—
30
Card
The capacity of the SD card
decreased.
≥When a BD-Video that supports the BD-Live is used, and an SD card is in the slot, data may
be written to the SD card. Erase the data by using “BD-Video Data Erase”, format the card or
use a new card.
19
7
Music on an SD card cannot be ≥Data that can be played from an SD card are AVCHD, MPEG2 and JPEG data.
played.
The contents of the card
cannot be read.
≥The card is not compatible or the contents on the card may be damaged.
≥Turn off and then turn on the unit again.
7
—
USB
The contents of the USB device ≥Remove the USB device from the USB port and then insert again. If this does not solve the
—
problem, turn off and turn on the unit again.
≥Check that the USB device is inserted correctly.
≥The format of the USB device or of its contents is not compatible with the unit. (The contents
on the USB device may be damaged.)
cannot be read.
16
7
≥The USB device contains a folder structure and/or file extensions that are not compatible with
this unit.
≥Turn off and then turn on the unit again.
≥USB memories connected using a USB extension cable or a USB hub may not be
recognized by this unit.
35
—
—
≥Some USB devices cannot be used with this unit.
≥If inserted during playback the USB device may not be recognized by this unit.
7
—
USB device cannot be
operated.
≥Turn the power of this unit off once, and turn it back on.
7
RQT9407
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Network
Page
I can’t connect to the network.
≥Has the LAN cable come unplugged? Check that the LAN cable is properly connected.
≥Have you plugged in a modular cable for use with a telephone into the LAN terminal on this
unit? Connect with a straight LAN cable.
13
13
≥Is the power for the modem or broadband router turned on? Turn the power on for each
device.
≥Is there a mistake in the network settings? Follow any instructions you may have received
from your ISP (Internet Service Provider) and make changes to the settings.
≥Are the broadband router settings correct? Read the operating instructions for the broadband
router.
—
—
—
—
≥Is the broadband router and/or modem correctly connected? Check the operating
instructions for each device and connect accordingly.
≥Check the “Network Settings” and “BD-Live Internet Access” settings.
29, 32
—
While using my PC, I cannot
connect to the network.
≥Does your Internet Service Provider (ISP) or service contract prevent multiple terminals
connecting at the same time? Check the content of your contract.
VIERA CAST does not operate
or connect.
≥Is the network connection correct?
≥Image of the video contents may be disturbed or may not display depending on how busy the
environment or the connected line is.
13
—
Other difficulties with playback
Audio and video momentarily
pause.
≥This occurs between playlist chapters or scenes ([AVCHD]).
—
—
≥When playing a title recorded on both layers, the unit automatically switches between layers
and plays the title in the same way as a normal program. However, video and audio may
momentarily cut out when the unit is switching layers.
BD-Video or DVD-Video is not
played.
≥Ensure the disc is for the correct BD-Video region code or DVD-Video region number, and is
not defective.
≥You have set a ratings level to limit BD-Video or DVD-Video play. Change this setting.
≥Some BD-Video can only be output with HDMI.
Cover
29
—
Picture-in-picture is not played ≥Confirm whether the disc supports picture-in-picture.
—
with BD-Video.
The BD-Live is not played with ≥Confirm whether the disc supports the BD-Live.
19
—
7
≥The inserted SD card does not have sufficient available capacity.
≥The SD card is write-protected.
BD-Video.
≥Sub contents copied to an SD card are provided by the disc producer as a part of the
BD-Video content. Even if you record images and audio onto an SD card, it cannot be played
as a BD-Live.
19
Alternative soundtrack and
subtitles cannot be selected.
≥The languages are not recorded on the disc.
≥You may not be able to use the on-screen menu to change the soundtrack and subtitles on
some discs. Use the disc’s menus to make changes.
—
16
No subtitles.
≥Subtitles are not recorded on the disc.
≥Turn the subtitles on. Set “Subtitle” on the on-screen menu to “On”.
—
26
Angle cannot be changed.
≥Angles can only be changed during scenes where different angles are recorded.
—
—
The resume play function does ≥Memorized positions are canceled when
–pressing [∫] several times.
–opening the disc tray.
not work.
≥The resume play function may not work depending on the disc.
≥[BD-V]: On BD-Video discs including BD-J, the resume play function does not work.
—
—
When other Panasonic products respond to this remote control
Change the remote control code on the main unit and the remote control (the two must match) if you place other Panasonic products close
together.
When the following indicator
appears on the unit’s display and
you are unable to operate the unit
1 Press [SETUP].
2 Press [3, 4] to select “General” and press [OK].
3 Press [3, 4] to select “Remote Control” and
press [OK].
4 Press [3, 4] to select the code (1, 2, or 3) and
press [OK].
NOTE
Remote Control
Set Code 1
Set Code 2
Set Code 3
The unit’s remote control code
Press
[
]
and [OK]together
5
To change the code on the remote control
While pressing [OK], press and hold the
numbered button ([1], [2] or [3]) for more than
5 seconds.
Press and hold [OK] and the
indicated number button at the same
time for more than 5 seconds.
for more than 5 seconds on
the remote.
6 Press [OK].
RQT9407
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Folder
Glossary
This is a place on the disc, USB device or SD card where groups of
data are stored together. Additional folders can be created within
folders, and you can make detailed classifications depending on the
folder structure. (ꢁ35)
Frames and fields
Frames refer to the single images that constitute the video you see
on your television. Each frame consists of two fields.
AVCHD
AVCHD is a new format (standard) for high definition video cameras
that can be used to record and play high-resolution HD images.
BD-J
Some BD-Video discs contain Java applications, and these
applications are called BD-J. You can enjoy various interactive
features in addition to playing normal video.
BD-Live
r
This is a BD-Video (BD-ROM Profile 2) that supports the new functions such
as Internet connection, etc. in addition to the BONUSVIEW function.
Bitstream
Frame
Field
Field
This is the digital form of multi-channel audio data (e.g., 5.1 channel)
before it is decoded into its various channels.
≥A frame still shows two fields, so there may be some blurring, but
picture quality is generally better.
≥A field still shows less picture information so it may be rougher, but
there is no blurring.
Gateway
BONUSVIEW (Final Standard Profile)
This is a BD-Video (BD-ROM Profile 1 version 1.1) that supports the
new functions such as Picture-in-picture and Secondary Audio, etc.
IP address of the electronic device providing Internet access.
Usually called a router IP address. (e.g., 192.168.0.1)
Deep Colour
This unit incorporates HDMITM (Deep Colour) technology that can
reproduce greater color gradation (4096 steps) when connected to a
compatible TV.
HDMI (High-Definition Multimedia Interface)
HDMI is a digital interface for consumer electronic products. Unlike
conventional connections, it transmits uncompressed digital video
and audio signals on a single cable.
You can enjoy exceptionally rich, natural-looking colors, with
smooth, detailed gradation and minimal color banding.
[A lower color gradation (256 steps), without Deep Colour, will be
reproduced if connected to a TV which does not support Deep Colour.
The unit will automatically set appropriate output to suit the connected TV.]
Hub
Used for connecting more than one device to the network.
IP address
DivX [BD80]
A set of numbers which distinguish each device on the network
when, for example, connected to the Internet. When using a PC in a
LAN to access a PC or device that is not included in the LAN, the IP
address is called the local IP address. (e.g., 192.168.0.10)
DivX is a popular media technology created by DivX, Inc. DivX
media files contain highly compressed video with high visual quality
that maintains a relatively small file size.
DNS Server
JPEG (Joint Photographic Experts Group)
A server which acts like a telephone directory and translates Internet
domain names into IP addresses.
This is a system used for compressing/decoding color still pictures. If
you select JPEG as the storage system on digital cameras, etc., the
data will be compressed to 1/10–1/100 of its original size. The
benefit of JPEG is less deterioration in picture quality considering
the degree of compression.
Dolby Digital
This is a method of coding digital signals developed by Dolby
Laboratories. Apart from stereo (2-channel) audio, these signals can
also be multi-channel audio.
LAN (Local Area Network)
Dolby Digital Plus
Multi-channel audio and higher audio quality is made possible using
Dolby Digital Plus. BD-Video supports up to 7.1 channel output.
A group of linked devices in a company, school or home.
Indicates the boundaries of a particular network.
Local storage
Dolby TrueHD
This storage area is used as a destination for sub contents for
playing BD-Live on BD-Video.
Dolby TrueHD is a very high quality audio format that reproduces the
studio master audio. BD-Video supports up to 7.1 channel output.
LPCM (Linear PCM)
Down-mixing
These are a kind of PCM format.
This is the process of remixing the multi-channel audio found on
some discs into fewer channels.
These are uncompressed digital signals, similar to those found on CDs.
MPEG2 (Moving Picture Experts Group)
DTS (Digital Theater Systems)
This surround system is used in many movie theaters. There is good
separation between the channels, so realistic sound effects are possible.
A standard for efficiently compressing and expanding colour video.
MPEG2 is a compression standard used for DVD and satellite based
digital broadcasting.
DTS-HD
MP3 (MPEG Audio Layer 3)
DTS-HD is a high-quality, sophisticated audio format used in movie
theaters. Previous DTS Digital Surround-compatible equipment can
play DTS-HD as DTS Digital Surround audio. BD-Video supports up
to 7.1 channel output.
An audio compression method that compresses audio to approximately
one tenth of its size without any significant loss of audio quality.
P4HD (Pixel Precision Progressive Processing for HD)
This is a processor which makes use of an exclusive Panasonic
algorithm. Various processing is supported, including a high-level
conversion of the TV scanning format from interlace to progressive
and a high-level conversion of standard resolution (480i or 576i)
video signal to a 1080 High Definition video signal.
DTS-HD High Resolution Audio
This is a signal format achieved by improving the previous DTS,
DTS-ES and DTS 96/24 formats. It is compatible with sampling
frequency 96 kHz/48 kHz. BD-Video supports up to 7.1 channel output.
Consequently, this unit is able to provide video of optimal resolution
to the connected TV.
DTS-HD Master Audio
This is a lossless audio format and compatible with 96 kHz/7.1ch or
less. In addition, faithful reproduction of the master audio is enabled
using lossless audio encoding technology. BD-Video supports up to
7.1 channel output.
Pan&Scan/Letterbox
In general, DVD-Video are produced with the intention that they be
viewed on a widescreen television (16:9 aspect ratio), so images
often don’t fit regular (4:3 aspect ratio) televisions. Two styles of
picture, “Pan & Scan” and “Letterbox”, deal with this problem.
Dynamic range
Dynamic range is the difference between the lowest level of sound
that can be heard above the noise of the equipment and the highest
level of sound before distortion occurs.
Dynamic range compression means reducing the gap between the
loudest and softest sounds. This means you can listen at low
volumes but still hear dialog clearly.
Pan&Scan:The sides are cut off so the picture fills
the screen.
Letterbox: Black bands appear at the top and
bottom of the picture so the picture itself
appears in an aspect ratio of 16:9.
Film and video
DVD-Video are recorded using either film or video. This unit can
determine which type has been used, then uses the most suitable
method of progressive output.
PCM (Pulse Code Modulation)
This is one format for converting analog audio into digital audio,
enabling you to enjoy digital audio with no hassle.
Film:
Recorded at 25 frames per second (PAL discs) or 24
frames per second (NTSC discs). (NTSC discs recorded
at 30 frames per second as well.)
Picture-in-picture
This is a function of BD-Video that plays the primary video and
secondary video simultaneously. For instance, the function is
capable of playing the original movie as the primary video while
playing video commentary from the film director on a small screen as
a secondary video.
Generally appropriate for motion picture films.
Recorded at 25 frames/50 fields per second (PAL discs) or
30 frames/60 fields per second (NTSC discs). Generally
appropriate for TV drama programs or animation.
Video:
RQT9407
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Progressive/Interlace
VIERA CAST
The PAL video signal standard has 625 (or 576) interlaced (i) scan
lines, whereas progressive scanning, called 625p (or 576p), uses
twice the number of scan lines. For the NTSC standard, these are
called 525i (or 480i) and 525p (or 480p) respectively.
Using progressive output, you can enjoy the high-resolution video
recorded on media such as DVD-Video.
Your television must be compatible to enjoy progressive video.
Panasonic televisions with 625 (576)/50i · 50p, 525 (480)/60i · 60p
input terminals are progressive compatible.
An information service unique to Panasonic where specific Web
sites can be viewed on this unit by connecting to the Internet without
using a PC.
x.v.ColourTM
x.v.ColourTM is a name for devices that are compatible with the
xvYCC format, an international standard for expanded colour in
motion pictures, and that follow the rules for signal transmission.
You can enjoy vivid colours of wider colour ranges for a more
realistic picture when connected to a TV that supports the
x.v.ColourTM with HDMI cable.
Router
Distinguishes the IP address assigned to each device, such as the
PC, and relays the flow of data within the network.
Sampling frequency
Sampling is the process of converting the heights of sound wave
(analog signal) samples taken at set periods into digits (digital
encoding). Sampling frequency is the number of samples taken per
second, so larger numbers mean more faithful reproduction of the
original sound.
1080i (1125i)
In one high definition image, 1080 (1125) alternating scan lines pass
to create an interlaced image. Because 1080i (1125i) more than
doubles current television broadcasts of 480i, the detail is much
clearer and creates a more realistic and rich image.
1080p (1125p)
In one high definition image, 1080 (1125) scan lines pass at the
same time to create a progressive image. Since progressive video
does not alternate scan lines like interlace, there is a minimal
amount of screen flicker.
Subnet mask
Enables efficient network use. A set of numbers which identify which
part of the IP address allocated to every device connected to the
router is the network portion.
24p
This is a progressive image recorded at a rate of 24 frames per second.
720p (750p)
In one high definition image, 720 (750) scan lines pass at the same
time to create a progressive image. Since progressive video does
not alternate scan lines like interlace, there is a minimal amount of
screen flicker.
USB (Universal Serial Bus)
An interface specification to connect peripherals. Playback of MP3,
JPEG, or DivX ([BD80]) recorded to a USB memory by PC or other
equipment, or JPEG in the Panasonic digital camera or similar
connected via USB connection cable is possible with this unit.
Specifications
Signal system:
PAL/NTSC
i5 to i35 oC
HDMI AV output
Operating temperature range:
Operating humidity range:
Playable disc:
Output format:
10 to 80 % RH (no condensation)
480p (525p)/576p (625p)/720p (750p)/1080i (1125i)/
1080p (1125p)
BD-Video
Output connector:
Type A (19 pin)
HDMITM (Deep Colour, x.v.ColourTM, High Bit rate Audio)
BD-ROM: Version 2
BD-RE: Version 3 (Single Layer, Dual Layer), JPEG*6
≥This unit supports “HDAVI Control 4” function.
SD card slot:
Connector:
USB slot:
Connector:
Ethernet:
10BASE-T/100BASE-TX:
Optical pick-up:
Wave length:
LASER Specification
Class 1 LASER Product:
BD-R:
DVD-RAM:
Version 2 (Single Layer, Dual Layer)
1 system
1 system
1 system
DVD Video Recording format, AVCHD format*8,
JPEG*4
DVD-R/DVD-R DL:
DVD-Video format*1, DVD Video Recording format*1,
AVCHD format*1, 8, DivX*7, JPEG*4, MP3
System with 2 lenses
790 nm (CDs)/650 nm (DVDs)/405 nm (BDs)
DVD-RW: DVD-Video format*1, DVD Video Recording format*1,
AVCHD format*1, 8
+R/+RW/+R DL:
Video*1, AVCHD format*1, 8
DVD-VIDEO:
Wave length:
Laser power:
790 nm (CDs)/650 nm (DVDs)/405 nm (BDs)
No hazardous radiation is emitted with the safety protection
DVD-Video format
CD-Audio:
Power supply:
[For[Australia[and[New[Zealand]
AC 220 to 240 V, 50 Hz
[For]Asia]and]Middle]East]
AC 220 to 240 V, 50 Hz/60Hz
[BD80]: Approx. 24 W
CD-DA
CD-R/CD-RW:
CD-DA, JPEG*5, MP3, DivX*7
Power consumption:
SD card:
SD Memory Card*2 formatted FAT12, FAT16, FAT32*3:
JPEG*4, AVCHD format*8, MPEG-2
[BD60]: Approx. 22 W
Power consumption in standby mode:
[BD80]
USB device:
Quick Start: Off
Quick Start: On
[BD60]
Quick Start: Off
less than 0.5 W
6 W
USB Standard:USB 2.0 High Speed
Format:
Video output:
Output level:
Output connector:
Component video output:
MP3, JPEG*4, DivX*7
FAT12, FAT16, FAT32
less than 0.5 W
5 W
1.0 Vp-p (75 ≠)
Pin jack (1 system)
(1080i/720p/480p/480i: 60 Hz)
(1080i/720p/576p/576i: 50 Hz)
1.0 Vp-p (75 ≠)
Quick Start: On
Dimensions (WkDkH)
[BD80]:
Excluding the projecting parts:
Including the projecting parts:
[BD60]:
430 mmk242 mmk55 mm
430 mmk249 mmk55 mm
Y output level:
PB output level:
PR output level:
0.7 Vp-p (75 ≠)
0.7 Vp-p (75 ≠)
Excluding the projecting parts:
Including the projecting parts:
Mass:
430 mmk242 mmk49 mm
430 mmk249 mmk49 mm
Approx. 2.6 kg
Output connector:
Pin jack (Y: green, PB: blue, PR: red)
(1 system)
Audio output:
[Note]
Output level:
Output connector:
Number of connectors:
2 Vrms (1 kHz, 0 dB)
Pin jack
Specifications are subject to change without notice.
*1 Finalizing is necessary.
*2 Includes SDHC card
Includes miniSD Cards (need a miniSD Adaptor)
Includes microSD Cards (need a microSD Adaptor)
*3 Does not support long file name
*4 The total combined maximum number of recognizable picture
contents and folders: 3000 picture contents and 300 folders.
*5 The total combined maximum number of recognizable picture
contents and folders: 999 picture contents and 99 folders.
*6 The total combined maximum number of recognizable picture
contents and folders: 9999 picture contents and 300 folders.
*7 [BD80] The total combined maximum number of recognizable file
contents and folders: 200 file contents and 300 folders.
*8 AVCHD format V1.0
[BD80]: 7.1 channel discrete output: 1 system
(2 channel + 5.1 channel discrete output)
[BD60]: 2 channel: 1 system
Audio performance:
Frequency response:
≥DVD (linear audio):
4 Hz to 22 kHz (48 kHz sampling)
4 Hz to 44 kHz (96 kHz sampling)
4 Hz to 20 kHz
≥CD-Audio:
S/N ratio:
Dynamic range:
115 dB
100 dB
0.003 %
Total harmonic distortion:
Digital audio output:
Optical digital output:
Coaxial digital output [BD80]:
Optical terminal
Pin jack
≥Useable capacity will be less. (SD Card)
RQT9407
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Audio
M Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Menu
Attribute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Changing audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26, 29
AVCHD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
On-screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Pop-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
MPEG2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
MP3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21, 34, 42
B BD-J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
BD-Live . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19, 42
BD-Video Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
BONUSVIEW (Final Standard Profile). . . . . . . . . . . . . . . 19, 42
N Noise reduction (NR)
Integrated NR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
3D NR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
O On-screen
C Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Cleaning
Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Status messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Connection
Amplifier/Receiver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9,10
HDMI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 9
P PCM Down Conversion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Picture-in-picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Playback Information Window . . . . . . . . . . . . . . . . . . . . . . . 27
Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Pop-up Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Progressive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27, 43
Properties
D Deep Colour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Dialog Enhancer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Direct Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
DivX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 34, 42
DNS Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 42
Dolby Digital . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 30, 42
Dolby Digital Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 30, 42
Dolby TrueHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 30, 42
DTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 30, 42
DTS-HD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 30, 42
Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Still picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Proxy Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
P4HD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Q Quick Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
R Ratings level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Re-master. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18, 27
Remote control code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Resume play function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
S SD card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7, 19
Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Slideshow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Soundtrack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Status Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Still pictures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
F Finalize. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
H HDMI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 9, 42
High Clarity Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27, 30
I IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 42
J JPEG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 34, 42
L LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 42
Language
T TV System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
U USB device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26, 29
Code list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Soundtrack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26, 29
Local storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
LPCM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
V V. Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
VIERA CASTTM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
VIERA Link “HDAVI ControlTM” . . . . . . . . . . . . . . . . . . . . . . .28
X x.v.ColourTM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
24p . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27, 31
CLASS 1
LASER PRODUCT
(Inside of product)
-If you see this symbol-
Information on Disposal in other Countries outside the
European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your
local authorities or dealer and ask for the correct
method of disposal.
Panasonic Corporation
p
Web Site: http://panasonic.net
RQT9407-1L
F0209YA1039
Download from Www.Somanuals.com. All Manuals Search And Download.
|