Panasonic Battery Charger KX TCA391ALN User Manual

Portable Unit  
Model No. KX-TCA391ALN  
Operating Instructions  
PLEASE READ BEFORE USE AND SAVE.  
This model is the optional portable unit for the  
KX-TC1170ALN. These operating instructions  
cover most of the features of this portable unit.  
Please read the KX-TC1170ALN operating  
Accessories (included)  
Charger ..................one  
AC Adaptor.............one  
Portable Unit Cover...one  
Battery....................one  
Contents  
Installation .......................................1  
Location of Controls.........................2  
Registering Portable Units...............3  
Making Calls....................................4  
Answering Calls...............................4  
Caller ID Service..............................5  
Intercom...........................................6  
Transferring a Call...........................7  
Using the Directory..........................8  
Battery Replacement.......................9  
Wall Mounting..................................9  
Safety Instructions.........................10  
Installation!  
Connecting the AC adaptor to the charger  
To Power Outlet  
(AC 220 V240 V, 50 Hz)  
AC Adaptor  
USE ONLY WITH Panasonic AC  
ADAPTOR PQLV13AL.  
The AC adaptor must remain connected  
at all times. (It is normal for the adaptor  
Bottom of  
the charger  
Fasten the AC adaptor cord to prevent  
it from being disconnected.  
to feel warm during use.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
– 1 –  
Registering Portable Units!  
Registration is necessary for portable units. A portable unit will be assigned the  
number at registration. The portable unit number is used when paging and  
transferring calls. You can register up to 4 portable units at the base unit.  
You can not assign the same number to more than one portable unit. To  
conrm the portable unit number, place the portable unit on the charger.  
Make sure that the portable unit and base unit are in the standby mode.  
Registration must be completed within 1 minute.  
11:34AM 12/25  
Base unit:  
1
Press (FUNCTION/EDIT) until 2 beeps sound.  
SAVE AUTO# ?  
11:34AM 12/25  
Press (*).  
The IN USE indicator ashes.  
2
UNIT ASSIGN  
Portable unit:  
Press (FUNCTION/EDIT).  
3
Save directory  
Ringer volume  
H
OK=Yes  
GF  
H
Press  
or  
repeatedly until the arrow points  
OK (Yeskey).  
4
5
6
7
to Program, then press  
Program  
H
OK=Yes  
GF  
H
Press  
or  
repeatedly until the arrow  
points to Unit option, then press  
Set recall time  
Unit option  
H
OK (Yeskey).  
OK=Yes  
GF  
H
While Assignis at the arrow, press  
OK (Yeskey).  
Assign  
Erase  
H
OK=Yes  
:2  
GF  
H
Press  
or  
repeatedly until the desired  
portable unit number (1 to 4) is displayed.  
(Ex. 2is selected.)  
Unit No  
OK=Save  
GF  
H
The selected number is displayed.  
Press  
OK (Savekey).  
8
9
A beep sounds on the base unit and portable unit.  
The IN USE indicator on the base unit goes out.  
Press (EXIT/CH) to return to the standby mode.  
The portable unit number (1 to 4) will be displayed on  
the portable unit.  
–2–  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 –  
You can exit the programming mode any time by pressing (EXIT/CH).  
If 3 beeps sound and the display shows Save error, place the portable unit on the  
charger. Start again from step 1.  
When you want to change the portable unit number, erase the previous number. Then  
restart from step 1.  
While charging the portable unit, registered portable unit number is displayed.  
To erase the portable unit number  
Press (FUNCTION/EDIT)  
or  
to select Program”  
OK (Yeskey)  
or  
or  
to select Unit option”  
OK (Yeskey)  
to select Erase”  
OK (Yeskey) OK (Yeskey).  
Making Calls!  
ABC  
JKL  
DEF  
TALK  
INTERCOM  
TALK  
INTERCOM  
MNO  
GH I  
1
2
3
WXYZ  
PQRS  
TUV  
OK  
OK  
NC
EXIT/CH  
NC
EXIT/CH  
DEF  
DEF  
3
3
Press (TALK).  
Dial a phone number.  
To hang up, press (TALK)  
or place the portable unit on  
the charger.  
To dial after confirming the entered number:  
Enter a phone number and press (TALK).  
To select the receiver volume, press  
available. Each time you press or  
or  
while talking. 2 levels (HIGH, LOW) are  
, the volume level will change.  
If noise interferes with the conversation, press (EXIT/CH) to select a clearer channel or  
move closer to the base unit.  
When the base unit or one of the portable units is in use or in the intercom mode, other  
portable units can not be used.  
To redial the last number dialled  
Press (TALK)  
(REDIAL/PAUSE).  
Answering Calls!  
ABC  
JKL  
DEF  
All of the portable units ring  
when calls are received.  
TALK  
INTERCOM  
MNO  
GH I  
WXYZ  
PQRS  
TUV  
OK  
OR  
UNC
EXIT/CH  
DEF  
3
Press (TALK).  
Press one of the dialling  
buttons.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 –  
Caller ID Service!  
This unit is compatible with a Caller ID service offered by your telephone  
company. After subscribing to a Caller ID service, the calling partys information  
will be displayed after the rst ring.  
The unit can record information of up to 50 different callers, including the time  
and date the call was received and the number of times called, in the Caller List.  
The Caller List information is sorted from the most recent to the oldest call.  
When the 51st call is received, the oldest call is deleted.  
When a second call is received while talking, the new callers phone number will  
be displayed. (For Australia only)  
How caller information is displayed when a call is received  
The display shows the callers phone number after the  
rst ring.  
After you answer the call, the display will show the length of  
the call.  
0211115555  
Caller information cannot be displayed in the following cases:  
If the caller dialled from an area which does not provide a Caller ID service, the  
display will show Out of area.  
If the caller has requested not to display his/her information, the display will show  
Private caller.  
If a long distance call cannot be identied, the display will show Long distance.  
To view the Caller List  
You can check who has called as follows.  
Ex. When you search from the most recent call:  
Press  
or  
OK.  
2 new calls  
=New  
Old  
G
F
=
* If you receive a call from one of the same phone  
numbers stored in the directory, the callers name  
will be displayed (Private name display).  
Press  
.
** If an arrow () is displayed after the number, the  
whole phone number has not been shown. Press  
(#) () to see the remaining numbers. Press (*)  
() to return to the previous display.  
02223334444  
3:10P JUN10  
Press  
.
*
To return to the previous caller, press  
.
NANCY BROWN  
0244448888  
1:54P JUN 9 2  
To exit the Caller List, press (EXIT/CH).  
The portable unit will return to the standby mode.  
Press  
.
**  
Display meaning:  
: You have checked this caller information,  
answered the call or called back the caller.  
29 : The number of times the same caller  
called (up to 9). After checking,  
0123456789012345→  
10:38A JUN 9  
2”–“9will be replaced with .  
Press  
.
Download from Www.Somanuals.com. All Manuals Search And Download.  
5 –  
To call back from the Caller List  
TALK  
INTERCOM  
TALK  
INTERCOM  
TALK  
INTERCOM  
1
2
3
OK  
OK  
OK  
FUNCTION/EDIT  
FUNCTION/EDIT  
UNC
EXIT/CH  
EXIT/CH  
EXIT/CH  
DEF  
ABC  
DEF  
ABC  
DEF  
1
2
3
1
2
3
3
Press  
or  
OK  
Press  
or  
Press (TALK).  
to enter the Caller List.  
repeatedly to nd the  
desired caller.  
In step 2, if required, edit the phone number (See the operating instructions for the  
KX-TC1170ALN).  
For New Zealand Users:  
Your telephone service provider may charge you for a local call when it is  
dialled with an area code prex. If the charge for a local call is unacceptable,  
only the 7-digits of the local number should be dialled from your telephone.  
Do not dial the 0prex or the area code digit.  
Intercom!  
A 2-way intercom is available between one of the portable units and base unit  
when another portable unit is not in use.  
To make intercom calls  
TALK  
INTERCOM  
TALK  
INTERCOM  
1
2
FUNCTION/EDIT  
XIT
FUNCTION/EDIT  
XIT
DE
ABC  
DE
ABC  
1
2
1
2
Press (INTERCOM).  
To end the intercom,  
press (INTERCOM) or  
place the portable unit  
on the charger.  
To answer intercom calls  
TALK  
INTERCOM  
Press INTERCOM  
FUNCTION/EDIT  
XIT
DE
ABC  
1
2
Press (INTERCOM).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6 –  
Transferring a Call!  
To the base unit  
The intercom can be used during a call. This feature enables you to transfer a  
call between the base unit and a portable unit.  
When the base unit  
user answers the  
page, you can  
announce the  
transfer.  
When the base unit user  
presses (HOLD/RINGER)  
or (SP-PHONE) to answer  
the call, the transfer is  
completed.  
TALK  
INTERCOM  
1
2
3
FUNCTION/EDIT  
XIT
DE
ABC  
1
2
If the base unit user  
does not answer  
the page, press  
(TALK).  
During a call, press  
(INTERCOM).  
The call is put on hold.  
To another portable unit  
Transferring a call is available between one portable unit and another one.  
ABC  
DEF  
When another portable unit  
user presses (TALK) to  
answer the call, the  
TALK  
INTERCOM  
MNO  
GH I  
JKL  
1
2
3
WXYZ  
PQRS  
TUV  
transfer is completed.  
FUNCTION/EDIT  
XIT
DE
ABC  
1
2
During a call, press  
(INTERCOM).  
Enter the desired portable  
unit number ((1) to (4))  
within 2 seconds.  
The call is put on hold.  
If another portable unit  
user does not answer the  
page, press (TALK).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 –  
Using the Directory!  
You can store up to 30 names and phone numbers in the directory. All directory  
items are sorted by the rst word in alphabetical order. Using the directory, you  
can make a call by selecting a name on the display.  
To store names and phone numbers in the directory  
Make sure that the portable unit is in the standby mode.  
ABC  
JKL  
DEF  
TALK  
INTERCOM  
TALK  
INTERCOM  
MNO  
GH I  
1
4
2
5
3
6
WXYZ  
PQRS  
TUV  
OK  
OK  
FUNCTIEDIT  
EXIT/CH  
FUNCTION/EDIT  
EXIT/CH  
DEF  
ABC  
DEF  
ABC  
1
2
3
1
2
3
Press  
(FUNCTION/EDIT).  
Press  
OK (Yes  
Enter a name, up to  
15 characters (see below).  
key) while the arrow  
points to Save  
directory.  
ABC  
DEF  
TALK  
INTERCOM  
TALK  
INTERCOM  
MNO  
GH I  
JKL  
WXYZ  
PQRS  
TUV  
OK  
OK  
FUNCTION/EDIT  
FUNCTION/EDIT  
EXIT/CH  
EXIT/CH  
DEF  
ABC  
DEF  
ABC  
1
2
3
1
2
3
Press  
key).  
OK (Next  
Enter a phone number,  
up to 22 digits.  
Press  
OK (Savekey).  
To store other items,  
repeat from step 2.  
To return to the standby  
mode, press (EXIT/CH).  
To enter names and symbols  
The dialling buttons can be used to enter letters and symbols. Pressing each  
button selects a character as shown below.  
Keys  
Index  
# & ( ) S , - . / 1  
A B C a b c 2  
D E F d e f 3  
G H I g h i 4  
J K L j k l 5  
Keys  
Index  
Keys  
Index  
6
7
8
9
0
1
2
3
4
5
M N O m n o 6  
P Q R S p q r s 7  
T U V t u v 8  
W X Y Z w x y z 9  
0 Blank  
To move the cursor to  
the left  
To move the cursor to  
the right  
#
To enter another character using the same dialling button, press # (→) to move the  
cursor to the next space.  
If you make a mistake while entering a name, use  
cursor to the incorrect character, press to delete and enter the correct character.  
Each time you press , a character is erased from the right.  
() or # (→) to move the  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8 –  
To dial from the directory  
1 Press  
or  
or  
to enter the directory list.  
TALK  
INTERCOM  
2 Press  
repeatedly to nd the desired item.  
OK  
To search for a name by the initial:  
FUNCTION/EDIT  
EXIT/CH  
DEF  
Press the dialling button for the rst letter of the desired name  
ABC  
1
2
3
until any name with the same initial is displayed. Press  
the name is displayed.  
until  
3 Press (TALK).  
To leave the directory list at any time, press (EXIT/CH).  
Battery Replacement!  
If Recharge batteryis displayed and/or “  
” flashes after being fully  
charged, replace the battery with a new Panasonic P-P301 (KX-A36A) battery.  
To avoid memory loss, replace within 3 minutes.  
Remove the portable unit cover by  
sliding while pressing the arrow.  
1
Replace the battery, and close the  
cover.  
2
Make sure to charge the new  
battery for about 10 hours in order  
to display the battery strength  
prompt correctly.  
3
Wall Mounting!  
The charger can be wall mounted.  
Install screws using the wall template below. Connect the AC adapter.  
Mount the charger, then slide it down.  
Screws  
3 cm  
To Power Outlet  
Wall Template  
3 cm  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9 –  
Safety Instructions!  
Take special care to follow the safety  
suggestions listed below.  
For best performance  
1) If noise prevents the conversation  
from being understood at the portable  
unit, approach the base unit to lessen  
the noise.  
2) The portable unit should be used at  
the HIGH volume setting when the  
reception tone is difficult to hear.  
3) The portable unit should be fully  
recharged on the charger when  
Recharge batteryis displayed  
Safety  
1) The unit should be connected to a  
power supply only of the type  
described in the operating instructions  
or as marked on the unit.  
2) When left unused for a long period of  
time, the unit should be unplugged  
from the household AC outlet.  
3) To minimize the possibility of lightning  
damage when you know that a  
thunderstorm is coming, we  
recommend that you:  
and/or “  
” flashes.  
4) The portable unit antenna should not  
be touched during use because of its  
high sensitivity.  
5) The maximum calling distance may be  
shortened when the unit is used in the  
following places: Near obstacles such  
as hills, tunnels, undergrounds, near  
metal objects such as wire fences, etc.  
a) Unplug the telephone line cord from  
the phone jack.  
b) Unplug the power supply cord from  
the AC power outlet.  
Installations  
Environment  
1) Do not use this unit near waterfor  
example, near a bathtub, washbowl,  
sink, etc. Damp basements should  
also be avoided.  
2) The unit should be kept away from  
heat sources such as radiators,  
kitchen range, etc. It also should not  
be placed in rooms where the  
temperature is less than 5°C or  
greater than 40°C.  
WARNING:  
TO PREVENT FIRE OR SHOCK  
HAZARD, DO NOT EXPOSE THE  
PRODUCT TO RAIN OR ANY TYPE OF  
MOISTURE.  
When a failure occurs which result in the  
internal parts becoming accessible,  
disconnect AC adaptor immediately and  
return this unit to the place of purchase or  
service centre.  
3) The AC adaptor is used as the main  
disconnect device, ensure that the AC  
outlet is located/installed near the unit  
and is easily accessible.  
This equipment has been tested and  
found to comply with AS/NZS 3548: 1995  
limits for electromagnetic interference.  
Any modications to any part of the  
system or to any peripherals may void the  
EMC compliance of the system or the  
peripherals.  
Placement  
1) Do not place heavy objects on top of  
this unit.  
2) Care should be taken so that objects  
do not fall onto, and liquids are not  
spilled into the unit. Do not subject this  
unit to excessive smoke, dust,  
mechanical vibration or shock.  
3) Place the unit on a at surface.  
This equipment will be inoperable if mains  
power fails.  
The earcap on the portable unit is  
magnetised and may retain metallic  
objects.  
Kyushu Matsushita Electric Co., Ltd.  
1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan  
Printed in Malaysia  
PQQX12815ZA-BM SS0800MK0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10 –  

Miele Freezer K 122 Ui 1 User Manual
Miele Welding Consumables KM2030 en CA User Manual
MTD Yard Vacuum 24665 9 User Manual
Napoleon Fireplaces Air Cleaner WF 6 9 18 User Manual
Napoleon Fireplaces Outdoor Fireplace B36DFN User Manual
Newcon Optik Hunting Equipment LRM 1500M User Manual
Opticon Scanner OPR 2001 User Manual
Optimus Digital Camera S1000PJ User Manual
Panasonic Network Card MAS3132E User Manual
Parkside Heat Gun PHLG 600 User Manual