Operating Instructions
Digital Cordless Answering System
Model No.
KX-TG4132
KX-TG4134
Model shown is KX-TG4132.
Before initial use, see “Getting Started”
on page 9.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for
future reference.
Consulte “Guía Rápida Española”, página 47.
This unit is compatible with Caller ID. You must subscribe to the appropriate service
offered by your service provider/telephone company.
in the U.S.A. or Puerto Rico.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Model composition
Base unit
Part No.
Handset
Series
Model No.
Part No.
Quantity
KX-TG4131
series
KX-TG4132
KX-TG4133
KX-TG4134
KX-TG4131
KX-TG4131
KX-TG4131
KX-TGA410
KX-TGA410
2
3
4
Accessory information
Supplied accessories
Quantity
Accessory item/
No.
Order number
KX-TG4132
KX-TG4133
KX-TG4134
1
2
AC adaptor/PNLV226Z
2
1
3
1
4
1
Telephone line cord/
PQJA10075Z
3
4
Wall mounting adaptor/
PQKL10088Z1
1
4
1
6
1
8
Rechargeable batteries/
HHR-4DPA
5
6
Handset cover*1, *2
Charger*3
2
1
3
2
4
3
*1 The handset cover comes attached to the handset.
*2 PNYNTGA410MR: Metallic gray, PNYNTGA410NR: Champagne gold
*3 PNLC1018ZM: Metallic gray, PNLC1018ZN: Champagne gold
1
2
3
4
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Introduction
Additional/replacement accessories
Please contact your nearest Panasonic dealer for sales information (page 51).
Accessory item
Order number
Rechargeable
batteries
HHR-4DPA*1
L To order, please call 1-800-332-5368 or visit
Battery type:
– Nickel metal hydride (Ni-MH)
– 2 x AAA (R03) size for each handset
T-adaptor
KX-J66
Range extender
KX-TGA405*2
*1 Replacement batteries may have a different capacity from that of the supplied batteries.
*2 By installing this unit, you can extend the range of your phone system to include areas where
reception was previously not available. This product can be purchased online. Please visit our
Expanding your phone system
Optional handset feature overview
You can expand your phone system by registering optional handsets (6 max.) to a single base
unit.
L Optional handsets may be a different color from that of the supplied handsets.
Feature
KX-TGA410
KX-TGA659
KX-TGA660
Handset
Display size
Button size
1.8 inches
Large
1.9 inches
Extra large
1.8 inches
Large
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Important Information
L Do not allow the AC adaptor or telephone
line cord to be excessively pulled, bent or
placed under heavy objects.
For your safety
To prevent severe injury and loss of life/
property, read this section carefully before
using the product to ensure proper and safe
operation of your product.
Operating safeguards
L Unplug the product from power outlets
before cleaning. Do not use liquid or
aerosol cleaners.
L Do not disassemble the product.
WARNING
L Do not spill liquids (detergents, cleansers,
etc.) onto the telephone line cord plug, or
allow it to become wet at all. This may
cause a fire. If the telephone line cord plug
becomes wet, immediately pull it from the
telephone wall jack, and do not use.
Power connection
L Use only the power source marked on the
product.
L Do not overload power outlets and
extension cords. This can result in the risk
of fire or electric shock.
L Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a fire.
L Regularly remove any dust, etc. from the
AC adaptor/power plug by pulling it from the
power outlet, then wiping with a dry cloth.
Accumulated dust may cause an insulation
defect from moisture, etc. resulting in a fire.
L Unplug the product from power outlets if it
emits smoke, an abnormal smell, or makes
an unusual noise. These conditions can
cause fire or electric shock. Confirm that
smoke has stopped emitting and contact
the Panasonic Call Center at 1-800-211-
PANA (1-800-211-7262).
Medical
L Consult the manufacturer of any personal
medical devices, such as pacemakers or
hearing aids, to determine if they are
adequately shielded from external RF
(radio frequency) energy. (The product
operates in the frequency range of 1.92
GHz to 1.93 GHz, and the RF transmission
power is 115 mW (max.).)
L Do not use the product in health care
facilities if any regulations posted in the
area instruct you not to do so. Hospitals or
health care facilities may be using
equipment that could be sensitive to
external RF energy.
CAUTION
L Unplug from power outlets and never touch
the inside of the product if its casing has
been broken open.
L Never touch the plug with wet hands.
Danger of electric shock exists.
Installation and location
L Never install telephone wiring during an
electrical storm.
L Never install telephone line jacks in wet
locations unless the jack is specifically
designed for wet locations.
L Never touch uninsulated telephone wires or
terminals unless the telephone line has
been disconnected at the network interface.
L Use caution when installing or modifying
telephone lines.
L The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and is
easily accessible.
Installation
L To prevent the risk of fire or electrical shock,
do not expose the product to rain or any
type of moisture.
L Do not place or use this product near
automatically controlled devices such as
automatic doors and fire alarms. Radio
waves emitted from this product may cause
such devices to malfunction resulting in an
accident.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Important Information
L This product is unable to make calls when:
– the handset batteries need recharging or
have failed.
Important safety
instructions
– there is a power failure.
When using your product, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Do not use this product near water for
example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet
basement or near a swimming pool.
2. Avoid using a telephone (other than a
cordless type) during an electrical storm.
There may be a remote risk of electric
shock from lightning.
Battery
L We recommend using the batteries noted
on page 4. USE ONLY rechargeable Ni-
MH batteries AAA (R03) size.
L Do not mix old and new batteries.
L Do not open or mutilate the batteries.
Released electrolyte from the batteries is
corrosive and may cause burns or injury to
the eyes or skin. The electrolyte is toxic and
may be harmful if swallowed.
L Exercise care when handling the batteries.
Do not allow conductive materials such as
rings, bracelets, or keys to touch the
3. Do not use the telephone to report a gas
leak in the vicinity of the leak.
4. Use only the power cord and batteries
indicated in this manual. Do not dispose of
batteries in a fire. They may explode.
Check with local codes for possible special
disposal instructions.
batteries, otherwise a short circuit may
cause the batteries and/or the conductive
material to overheat and cause burns.
L Charge the batteries provided with or
identified for use with this product only, in
accordance with the instructions and
limitations specified in this manual.
SAVE THESE INSTRUCTIONS
L Only use a compatible base unit (or
charger) to charge the batteries. Do not
tamper with the base unit (or charger).
Failure to follow these instructions may
cause the batteries to swell or explode.
For best performance
Base unit location/avoiding noise
Attention:
The base unit and other compatible Panasonic
units use radio waves to communicate with
each other.
L For maximum coverage and noise-free
communications, place your base unit:
– at a convenient, high, and central
location with no obstructions between
the handset and base unit in an indoor
environment.
– away from electronic appliances such as
TVs, radios, personal computers,
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY (1-800-822-
8837) for information on how to recycle this
battery.
wireless devices, or other phones.
– facing away from radio frequency
transmitters, such as external antennas
of mobile phone cell stations. (Avoid
putting the base unit on a bay window or
near a window.)
L Coverage and voice quality depends on the
local environmental conditions.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Important Information
L If the reception for a base unit location is not
satisfactory, move the base unit to another
location for better reception.
Notice for product disposal, transfer,
or return
L This product can store your private/
confidential information. To protect your
privacy/confidentiality, we recommend that
you erase information such as phonebook
or caller list entries from the memory before
you dispose of, transfer, or return the
product.
Environment
L Keep the product away from electrical noise
generating devices, such as fluorescent
lamps and motors.
L The product should be kept free from
excessive smoke, dust, high temperature,
and vibration.
Notice
L The product should not be exposed to direct
sunlight.
L Do not place heavy objects on top of the
product.
L When you leave the product unused for a
long period of time, unplug the product from
the power outlet.
L The product should be kept away from heat
sources such as heaters, kitchen stoves,
etc. It should not be placed in rooms where
the temperature is less than 0 °C (32 °F) or
greater than 40 °C (104 °F). Damp
basements should also be avoided.
L The maximum calling distance may be
shortened when the product is used in the
following places: Near obstacles such as
hills, tunnels, underground, near metal
objects such as wire fences, etc.
L Operating the product near electrical
appliances may cause interference. Move
away from the electrical appliances.
Routine care
L Wipe the outer surface of the product
ENERGY STAR
As an ENERGY STAR® Partner, Panasonic
has determined that this product meets the
ENERGY STAR guidelines for energy
efficiency. ENERGY STAR is a U.S. registered
mark.
with a soft moist cloth.
L Do not use benzine, thinner, or any
abrasive powder.
Other information
CAUTION: Risk of explosion if battery is
replaced by an incorrect type. Dispose of used
batteries according to the instructions.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Important Information
Specifications
■ Standard:
DECT 6.0 (Digital Enhanced
Cordless Telecommunications 6.0)
■ Frequency range:
1.92 GHz to 1.93 GHz
■ RF transmission power:
115 mW (max.)
■ Power source:
120 V AC, 60 Hz
■ Power consumption:
Base unit:
Standby: Approx. 0.9 W
Maximum: Approx. 3.8 W
Charger:
Standby: Approx. 0.1 W
Maximum: Approx. 2.0 W
■ Operating conditions:
0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 %
relative air humidity (dry)
Note:
L Design and specifications are subject to
change without notice.
L The illustrations in these instructions may
vary slightly from the actual product.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Getting Started
Battery installation
L USE ONLY Ni-MH batteries AAA (R03)
size.
Setting up
Connections
L Use only the supplied Panasonic AC
adaptor PNLV226.
L Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
L Confirm correct polarities (S, T).
■ Base unit
Hook
“Click”
Hooks
Rechargeable Ni-MH ONLY
Press plug
firmly.
(120 V AC, 60 Hz)
“Click”
To single-line
telephone jack
(RJ11C)
L When the date and time setting is
displayed, see page 12.
DSL/ADSL filter*
Correct
Wrong
Battery charging
Charge for about 7 hours.
L When the batteries are fully charged, the
charge indicator goes off and “Fully
charged” is displayed.
*DSL/ADSL filter (not supplied) is required if
you have DSL/ADSL service.
■ Charger
Confirm “Charging” is displayed.
Charge indicator
Hooks
(120 V AC, 60 Hz)
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Getting Started
Battery level
Note when setting up
Icon
Battery level
High
Note for connections
L The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
(
Medium
Low
)
0)4
Needs charging.
Empty
L The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
0
Panasonic Ni-MH battery
performance (supplied batteries)
Operation
Operating time
13 hours max.*1
11 days max.*1
During a power failure
The unit will not work during a power failure.
We recommend connecting a corded-type
telephone (without AC adaptor) to the same
telephone line or to the same telephone line
jack using a Panasonic T-adaptor (page 4).
In continuous use
Not in use
(standby)
*1 If Eco mode is on.
Note:
Note for battery installation
L Actual battery performance depends on
usage and ambient environment.
L Use the supplied rechargeable batteries.
For replacement, we recommend using the
Panasonic rechargeable batteries noted on
page 4, 6.
L Wipe the battery ends (S, T) with a dry
cloth.
L Even after the batteries are fully charged,
the handset can be left on the base unit or
charger without any ill effect on the
batteries.
L The battery level may not be displayed
correctly after you replace the batteries. In
this case, place the handset on the base
unit or charger and let it charge for at least 7
hours.
L Avoid touching the battery ends (S, T) or
the unit contacts.
Note for battery charging
L It is normal for the handset to feel warm
during charging.
L Clean the charge contacts of the handset,
base unit, and charger with a soft and dry
cloth once a month. Clean more often if the
unit is exposed to grease, dust, or high
humidity.
Intelligent eco mode
This feature automatically reduces handset
power consumption by suppressing handset
transmission power when the handset is close
to the base unit.
L When this feature is activated, i is
displayed.
L Eco mode is turned off when the clarity
booster is activated (page 15).
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Getting Started
H Display
I
J
{OFF}
{FLASH} {CALL WAIT}
Controls
K Microphone
Handset
L Charge contacts
■ Control type
A Soft keys
A
G
H
The handset features 3 soft keys. By
pressing a soft key, you can select the
feature shown directly above it on the
display.
B Navigator key
–
{^}, {V}, {<}, or {>}: Scroll through
various lists and items.
B
C
–
? VOL. (Volume: {^} or {V}): Adjust the
receiver or speaker volume while talking.
{<} CID (Caller ID): View the caller list.
{>} REDIAL: View the redial list.
I
J
–
–
D
E
Base unit
A
B
C
F
K
L
A
B
D
E
F
G
H
I
A Charge contacts
B Speaker
C Message counter
A Charge indicator
Ringer indicator
Message indicator
B Nonslip pad
D
E
F
{ERASE}
{■} (STOP)
{+}/{-} (Volume up/down)
{7}/{8} (Repeat/Skip)
L Nonslip pad offers support when you
cradle the handset between your
shoulder and ear.
G
{6} (PLAY)
C Speaker
D {C} (TALK)
E {s} (SP-PHONE: Speakerphone)
F Dial keypad (*: TONE)
G Receiver
Message indicator
H
I
{LOCATOR}
{ANSWER ON/OFF}
ANSWER ON/OFF indicator
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Getting Started
Display
Item
Meaning
9
@
Answering system
answers calls with a
greeting message and
recorded. (“Selecting
“Greeting only””,
page 33)
Handset display items
Item
w
Meaning
Within base unit range
Out of base unit range
_
C
The line is in use.
L When flashing:
The call is put on hold.
L When flashing rapidly:
An incoming call is now
being received.
■ Direct command code:
i
<
s
Eco mode is on. (page 10)
Equalizer is set. (page 16)
Programmable settings can be accessed
by pressing {MENU}, ( and then the
corresponding code on the dial keypad
(page 19).
Speakerphone is on. (page
14)
Example: Press {MENU}(1)1.
~
Ringer volume is off. (page
20)
■ Symbol meaning:
Example: {r}: “Off”
&
Silent mode is on. (page
23)
Press {V} or {^} to select the words in
quotations.
!
Call sharing mode is off.
(page 21)
Date and time
Important:
E
Alarm is on. (page 23)
Handset number
m
L When you install the batteries for the first
time, the handset may prompt you to set
date and time. First press {SELECT}, then
proceed to step 2.
&
Battery level
$
Blocked call (page 24)
(
Clarity booster is on. (page
15)
1
2
{MENU}(1)1
Enter the current month, date, and year
by selecting 2 digits for each.
Example: July 15, 2011
In use
Answering system is being
used by the base unit.
)7 15 11
Line in
use
Someone is using the line.
3
4
{OK}
Enter the current hour and minute (12-
hour clock format) by selecting 2 digits for
each.
Example: 9:30
)9 3)
5
6
{AM/PM}: Select “AM” or “PM”.
{SAVE} s {OFF}
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Getting Started
Note:
L When English is selected as the display
language, 12-hour clock format is used.
When Spanish is selected, 24-hour clock
format is used.
L The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
Display language
You can select either “English” or
“Español” as the display language. The
default setting is “English”.
1
2
{MENU}(11)
{r}: Select the desired setting. s
{SAVE}
3
{OFF}
Voice guidance language
You can select either “English” or
“Español” as the voice guidance language of
the answering system. The default setting is
“English”.
1
2
3
{MENU}(112
{r}: Select the desired setting.
{SAVE} s {OFF}
Dialing mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1
2
3
{MENU}(12)
{r}: Select the desired setting.
{SAVE} s {OFF}
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Making/Answering Calls
Pause (for PBX/long distance service
users)
Making calls
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 18).
Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:
1
Lift the handset and dial the phone
number.
L To correct a digit, press {CLEAR}.
2
3
Press {C} or {CALL}.
When you finish talking, press {OFF} or
place the handset on the base unit or
charger.
1
2
9 s {PAUSE}
Dial the phone number. s {C}
Using the speakerphone
1
Dial the phone number and press {s}.
L Speak alternately with the other party.
Note:
L A 3.5 second pause is inserted each time
{PAUSE} is pressed. Repeat as needed to
create longer pauses.
2
Note:
When you finish talking, press {OFF}.
L For best performance, use the
speakerphone in a quiet environment.
L To switch back to the receiver, press
{s}/{C}.
Answering calls
When a call is being received, the ringer
indicator flashes rapidly.
Adjusting the receiver or speaker
volume
Press {^} or {V} repeatedly while talking.
1
2
Lift the handset and press {C} or {s}
when the unit rings.
L You can also answer the call by
pressing any dial key from ) to 9, *,
or (. (Any key answer feature)
Making a call using the redial list
The last 5 phone numbers dialed are stored in
the redial list (each 48 digits max.).
When you finish talking, press {OFF} or
place the handset on the base unit or
charger.
1
{REDIAL} or {>} REDIAL
L If there is a new message in the voice
mail or answering system, {REDIAL}
is not displayed.
Auto talk
You can answer calls simply by lifting the
handset off the base unit or charger. You do
not need to press {C}. To turn this feature on,
see page 21.
2
3
{r}: Select the desired phone number.
{C}
Erasing a number in the redial list
Adjusting the handset ringer volume
1
2
{REDIAL} or {>} REDIAL
■ While the handset is ringing for an
incoming call:
Press {^} or {V} repeatedly to select the
desired volume.
{r}: Select the desired phone number.
s {ERASE}
3
4
{r}: “Yes” s {SELECT}
{OFF}
■ Programming the volume beforehand:
1
2
3
{MENU}(16)
{r}: Select the desired volume.
{SAVE} s {OFF}
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Making/Answering Calls
Temporary handset ringer off
While the handset is ringing for a call, you can
Flash
{FLASH} allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
turn the ringer off temporarily by pressing {~}.
Adjusting the base unit ringer volume
Press {+} or {-} repeatedly to select the
Note:
desired volume.
L To change the flash time, see page 21.
L To turn the ringer off, press and hold {-}
until the unit beeps.
For call waiting or Call Waiting
Caller ID service users
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your service
provider/telephone company.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
Useful features during a
call
Hold
This feature allows you to put an outside call
on hold.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller’s information is displayed after you hear
the call waiting tone on the handset.
1
2
3
Press {MENU} during an outside call.
{r}: “Hold” s {SELECT}
1
Press {CALL WAIT} to answer the 2nd
call.
To release hold, press {C}.
L Another handset user can take the call
by pressing {C}.
2
To switch between calls, press {CALL
WAIT}.
Note:
Note:
L If a call is kept on hold for more than 9
minutes, an alarm tone starts to sound and
the ringer indicator on the handset flashes
rapidly. After 1 additional minute on hold,
the call is disconnected.
L Please contact your service provider/
telephone company for details and
availability of this service in your area.
L If another phone is connected to the same
line, you can also take the call by lifting its
handset.
Temporary tone dialing (for
rotary/pulse service users)
You can temporarily switch the dialing mode to
tone when you need to access touch-tone
services (for example, answering services,
telephone banking services, etc.).
Mute
While mute is turned on, you can hear the
other party, but the other party cannot hear
you.
Press * (TONE) before entering access
numbers which require tone dialing.
1
Press {MUTE} during conversation.
L {MUTE} flashes.
Handset clarity booster
This feature can improve sound clarity when
the handset is used in an area where there
may be interference. During an outside call,
this feature is turned on automatically when
necessary.
2
To return to the conversation, press
{MUTE} again.
Note:
L {MUTE} is a soft key visible on the handset
display during a call.
L When this feature is turned on, ( is
displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Making/Answering Calls
Handset equalizer
This feature clarifies the voice of the person
you are talking to, producing a more natural-
sounding voice that is easier to hear and
understand.
1
2
3
4
Press {MENU} while talking.
{r}: “Equalizer” s {SELECT}
{r}: Select the desired setting.
Press {OK} to exit.
Note:
L When this feature is turned on, < is
displayed while talking.
L Depending on the condition and quality of
your telephone line, this feature may
emphasize existing line noise. If it becomes
difficult to hear, turn this feature off.
L This feature is not available while using the
speakerphone.
Call share
You can join an existing outside call.
To join the conversation, press {C} when the
other handset is on an outside call.
Note:
L A maximum of 4 parties (including 1 outside
party) can join a conversation using 3
extensions. (4-way conference)
L To prevent other users from joining your
conversations with outside callers, turn call
sharing mode off (page 21).
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Shared Phonebook
Key
Character
6
M
m
P
p
N
n
O
o
R
r
6
6
S
s
Shared phonebook
The shared phonebook allows you to make
calls without having to dial manually. Any
handset registered to the base unit can use
the shared phonebook. You can add 50 names
and phone numbers to the shared phonebook,
and assign each phonebook entry to the
desired group.
Important:
L Only 1 person can access the shared
phonebook at a time.
8
9
Q
q
7
7
T
U
u
V
v
8
8
Z
z
t
W
w
X
x
Y
y
9
9
)
(
0
L Caller ID subscribers can use group ringer
tone features (page 26).
#
L To enter another character that is located
on the same dial key, first press {>} to
move the cursor to the next space.
Adding entries
1
2
{C} s {ADD}
L If you do not press any dial key within 5
seconds after entering a character, the
character is fixed and the cursor moves to
the next space.
Enter the party’s name (16 characters
max.). s {OK}
3
4
Enter the party’s phone number (24 digits
max.). s {OK}
L
in the above table represents a single
space.
{r}: Select the desired group. s
{SELECT} 2 times
L To add other entries, repeat from step
2.
Erasing the character or number
Press {<} or {>}. s {CLEAR}
L Press and hold {CLEAR} to erase all
characters or numbers.
5
{OFF}
Character table for entering names
Groups
While entering characters, you can switch
between uppercase and lowercase by
pressing * (A→a).
Groups can help you find entries in the
phonebook quickly and easily. When adding
an entry to the phonebook, you can assign it to
one of 9 groups. You can change the names of
groups assigned for phonebook entries
(“Friends”, “Family”, etc.) and then search for
phonebook entries by group. The group ringer
tone feature is available for Caller ID
subscribers (page 26).
Key
Character
1
&
.
’
(
)
;
,
–
/
1
C
c
F
f
2
3
4
5
A
a
D
d
G
g
J
B
b
E
e
H
h
K
k
2
2
3
3
4
4
5
5
Changing group names
The default group name is “Group 1” to
“Group 9”.
I
1
2
3
{C} s {MENU}
{r}: “Group” s {SELECT}
{r}: Select the desired group. s
{SELECT}
i
L
l
j
4
{r}: “Group name” s {SELECT}
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Shared Phonebook
5
Edit the name (10 characters max.; page
17). s {SAVE}
{OFF}
4
5
{r}: Select the desired group (page 17).
s {SELECT} 2 times
6
{OFF}
Finding and calling from a
phonebook entry
Erasing entries
Erasing an entry
Scrolling through all entries
1
2
3
Find the desired entry (page 18).
{ERASE}
1
2
3
{C}
{r}: Select the desired entry.
{r}: “Yes” s {SELECT} s {OFF}
{C}
Erasing all entries
Searching by first character
1
2
3
4
5
{C} s {MENU}
1
2
{C}
{r}: “Erase all” s {SELECT}
{r}: “Yes” s {SELECT}
{r}: “Yes” s {SELECT}
{OFF}
Press the dial key () – 9 or () which
contains the character you are searching
for (page 17).
L Press the same dial key repeatedly to
display the first entry corresponding to
each character located on that dial
key.
L If there is no entry corresponding to
the character you selected, the next
entry is displayed.
Chain dial
This feature allows you to dial phone numbers
feature can be used, for example, to dial a
calling card access number or bank account
PIN that you have stored in the phonebook,
without having to dial manually.
3
4
{r}: Scroll through the phonebook if
necessary.
{C}
1
2
3
4
During an outside call, press {MENU}.
{r}: “Phonebook” s {SELECT}
{r}: Select the desired entry.
Searching by group
1
2
{C} s {GROUP}
Press {CALL} to dial the number.
{r}: Select the group you want to search.
s {SELECT}
Note:
L When storing a calling card access number
and your PIN in the phonebook as one
phonebook entry, press {PAUSE} to add
pauses after the number and PIN as
necessary (page 14).
L If you have rotary/pulse service, you need
to press * (TONE) before pressing
{MENU} in step 1 to change the dialing
mode temporarily to tone. When adding
entries to the phonebook, we recommend
adding * (TONE) to the beginning of
phone numbers you wish to chain dial
(page 17).
L If you select “All groups”, the unit
ends the group search.
3
4
{r}: Select the desired entry.
{C}
Editing entries
1
2
3
Find the desired entry (page 18). s
{EDIT}
Edit the name if necessary (16 characters
max.; page 17). s {OK}
Edit the phone number if necessary (24
digits max.). s {OK}
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Programming
Programmable settings
You can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods.
■ Scrolling through the display menus
1
2
3
4
{MENU}
Press {V} or {^} to select the desired main menu. s {SELECT}
Press {V} or {^} to select the desired item from the next sub-menus. s {SELECT}
Press {V} or {^} to select the desired setting. s {SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
■ Using the direct command code
1
{MENU} s Enter the desired code.
Example: Press {MENU}(1)1.
2
Select the desired setting. s {SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
Note:
L In the following table, < > indicates the default settings.
L In the following table, + indicates the reference page number.
L Display menu order and sub-menu may vary depending on your model.
Display the menu tree and direct command code table
Main menu: \ “Caller list”
Operation
Code
#213
+
Viewing the caller list.
27
Main menu: e “Answering device”
Sub-menu 1
Sub-menu 2
Setting
Code
#323
+
Play new msg.
–
–
30
(msg.: message)
Play all msg.
Erase all msg.*1
Greeting
–
–
–
–
–
–
–
#324
#325
#302
#303
#304
31
31
30
30
30
Record greeting*1
Check greeting
Pre-recorded*1
(Reset to pre-recorded
greeting)
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Programming
Sub-menu 1
Sub-menu 2
Ring count*1
Setting
Code
#211
+
Settings
2–7: 2–7 rings
<4 rings>
33
Recording time*1
1: 1 min
#305
33
3: <3 min>
0: Greeting only*2
Remote code*1
<111>
#306
#310
#327
#328
31
29
29
29
Screen call
1: <On> 0: Off
Answer on*1
Answer off*1
–
–
–
–
Main menu: g “V.M. access” (V.M.: Voice mail)
Operation
Code
#330
Listening to voice mail messages.
34
Main menu: 4 “Intercom”
Operation
Code
#274
+
Paging the desired unit.
36
Main menu: e “Set date & time”
Sub-menu 1
Date and time*1
Alarm
Sub-menu 2
Setting
Code
#101
#720
+
12
23
–
–
–
1: Once
2: Daily
0: <Off>
Time
–
1: <Caller ID auto>
0: Manual
#226
–
adjustment*1, *3
Main menu: c “Initial setting”
Sub-menu 1
Sub-menu 2
Ringer volume*4
Setting
Code
#160
+
Ringer setting
0–6: Off–6 <6>
14
(Handset)
Ringer tone*5, *6, *7
(Handset)
1–5: Tone1–5
<Tone 1>
6–0: Melody1–5
#161
#238
–
Silent mode
– On/Off
1: On0: <Off>
23
23
Silent mode
<11:00 PM/06:00 AM> #237
– Start/End
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Programming
Sub-menu 1
Set date & time Date and time*1
Sub-menu 2
Setting
Code
#101
#720
+
12
23
–
Alarm
1 :Once
2: Daily
0: <Off>
#226
–
0: Manual
Talking Caller
ID
Handset
Base unit*1
1: <On> 0: Off
#162
#*162
#104
#217
#240
1: On0: <Off>
Handset name
Call block*1
–
–
–
23
24
24
–
Block w/o num*1, *2
(Block calls without
phone number)
1: On0: <Off>
Voice mail
Store VM access#*1
–
#331
34
(VM: Voice mail)
VM tone detect*1
1: <On> 0: Off
1: <On> 0: Off
#332
#340
#145
34
–
Message alert
–
–
LCD contrast
(Display contrast)
Key tone*8
–
–
1: <On> 0: Off
#165
#214
Caller ID edit
(Caller ID number
auto edit)
1: <On> 0: Off
27
Auto talk*9
–
1: On0: <Off>
#200
#120
#121
14
13
15
Set tel line
Set dial mode*1
Set flash time*1, *10 0: 900 ms
1: <700 ms>
2: 600 ms
1: Pulse2: <Tone>
3: 400 ms
4: 300 ms
5: 250 ms
*: 200 ms
#: 160 ms
6: 110 ms
7: 100 ms
8: 90 ms
9: 80 ms
Set line mode*1, *11
–
1: A2: <B>
#122
#194
#130
#131
–
Call sharing*1
Registration
1: <On> 0: Off
16
25
25
Register handset
Deregistration*2
–
–
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Programming
Sub-menu 1
Sub-menu 2
Setting
Code
#110
+
Change language Display
1: <English>
13
2: Español
Voice prompt*1
1: <English>
#112
13
2: Español
Main menu: a “Customer support”*12
Operation
Code
#680
+
Displaying customer support Web address.
–
*1 If you program these settings using one of the handsets, you do not need to program the same
item using another handset.
*2 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select “Caller ID auto”. To turn this feature off, select “Manual”.
(Caller ID subscribers only) To use this feature, set the date and time first (page 12).
*4 Ringer volume cannot be turned off for alarm, intercom calls, and paging.
*5 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to
5). If you select a melody, you cannot distinguish lines by their ringers.
*6 If you select one of the melody ringer tones, the ringer tone continues to play for several
seconds even if the caller has already hung up. You may either hear a dial tone or no one on
the line when you answer the call.
*7 The preset melodies in this product are used with permission of © 2009 Copyrights Vision Inc.
*8 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any
keys, including confirmation tones and error tones.
*9 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*10The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier
if necessary. The setting should stay at “700 ms” unless pressing {FLASH} fails to pick up
the waiting call.
*11Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set the
line mode to “A” if telephone line condition is not good.
*12The handset can display the Internet address where you can download the operating
instructions or get further information for this product, using your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Important:
L Set the date and time beforehand (page
Special programming
12).
L We recommend turning the base unit ringer
off (page 15) in addition to turning the silent
mode on.
L If you have set the alarm, the alarm sounds
even if the silent mode is turned on.
Alarm
An alarm sounds at the set time for 3 minutes
once or daily. Alarm can be set for each
handset.
Important:
L Set the date and time beforehand (page
12).
Turning silent mode on/off
1
2
{MENU}(238
1
2
{MENU}(72)
{r}: Select the desired setting. s
{SAVE}
{r}: Select the desired alarm option. s
{SELECT}
L If you select “Off”, press {OFF} to
exit.
Off
Turns alarm off. Go to step 7.
3
Enter the desired hour and minute you
wish to start this feature.
Once
An alarm sounds once at the
set time.
4
5
{AM/PM}: Select “AM” or “PM”. s {OK}
Daily
An alarm sounds daily at the
set time. Go to step 4.
Enter the desired hour and minute you
wish to end this feature.
6
7
{AM/PM}: Select “AM” or “PM”.
3
Enter the desired month and date. s
{OK}
{SAVE} s {OFF}
L When the silent mode is set, & is
displayed.
4
5
6
Set the desired time.
{AM/PM}: Select “AM” or “PM”. s {OK}
{r}: Select the desired alarm tone. s
{SELECT}
L We recommend selecting a different
ringer tone from the one used for
outside calls.
Changing the start and end time
1
2
{MENU}(237
Continue from step 3, “Turning silent
mode on/off”, page 23.
7
{SELECT} s {OFF}
L When the alarm is set, E is displayed.
Changing the handset name
Note:
Each handset can be given a customized
name (“Bob”, “Kitchen”, etc.). This is useful
when you make intercom calls between
handsets. You can also select whether or not
the handset name is displayed in standby
mode. The default setting is “No”. If you select
“Yes” without entering any handset name,
“Handset 1” to “Handset 6” is displayed.
L To stop the alarm, press {OFF} or place the
handset on the base unit or charger.
L When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
Silent mode
1
2
{MENU}(1)4
Silent mode allows you to select a period of
time during which the handset will not ring for
outside calls. This feature is useful for time
periods when you do not want to be disturbed,
for example, while sleeping. Silent mode can
be set for each handset.
Enter the desired name (max. 10
characters; see the character table, page
17).
L If not required, go to step 3.
3
{SAVE}
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Programming
4
{r}: Select the desired setting. s
■ By entering phone numbers:
{SELECT} 2 times
1
2
{MENU}(217 s {ADD}
max.).
5
{OFF}
L To erase a digit, press {CLEAR}.
Call block (Caller ID subscribers
only)
3
{SAVE} s {OFF}
This feature allows the unit to reject calls
when:
– the unit receives a call from a phone
number stored in the call block list as
unwanted (“Storing unwanted callers”, page
24).
Blocking incoming calls without
phone number
You can reject a call when no phone number is
provided, such as a call just showing “Out of
area”.
– the unit receives a call without phone
number (“Blocking incoming calls without
phone number”, page 24).
1
2
{MENU}(24)
{r}: Select the desired setting. s
{SAVE} s {OFF}
When a call is received, the unit rings for a
short time while the caller is being identified. If
the phone number matches an entry in the call
block list, the unit sends out a busy tone to the
caller, and then disconnects the call.
Viewing/editing/erasing call block
numbers
1
2
{MENU}(217
Important:
{r}: Select the desired entry.
L To exit, press {OFF}.
L When the unit receives a call from a number
that is stored in the call block list or a call
without a recognized phone number, the
call is logged in the caller list (page 27) with
$ after the call is disconnected.
3
To edit a number:
{EDIT} s Edit the phone number. s
{SAVE} s {OFF}
To erase a number:
{ERASE} s {r}: “Yes” s {SELECT}
Storing unwanted callers
You can store up to 30 phone numbers in the
call block list.
s {OFF}
Note:
L When editing, press the desired dial key to
add, {CLEAR} to erase.
L When viewing, “Block w/o num” is
displayed if the blocking incoming calls
without phone number feature is turned on.
To turn the feature off: {ERASE} s {V} s
{SAVE} s {OFF}
Important:
L We recommend storing 10 digits (including
an area code). If only 7 digits are stored, all
numbers that have the same last 7 digits will
be blocked.
■ From the caller list:
1
2
{<} CID
{r}: Select the entry to be blocked.
L To edit the number, press {EDIT}
repeatedly until the phone number
is shown in the 10-digit format.
Registering a unit
Operating additional units
Additional handsets
3
4
5
6
{SAVE}
{r}: “Call block” s {SELECT}
{r}: “Yes” s {SELECT}
Edit the phone number if necessary
(24 digits max.).
Up to 6 handsets can be registered to the base
unit.
7
{SAVE} s {OFF}
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Programming
Important:
L See page 4 for information on the available
model.
Registering a handset to the base
unit
The supplied handset and base unit are pre-
registered. If for some reason the handset is
not registered to the base unit, re-register the
handset.
1
Handset:
{MENU}(13)
2
Base unit:
Press and hold {LOCATOR} for about 5
seconds until the registration tone
sounds.
L If all registered handsets start ringing,
press {LOCATOR} again to stop, then
repeat this step.
L The next step must be completed
within 90 seconds.
3
Handset:
Press {OK}, then wait until a long beep
sounds.
Note:
L While registering, “Base in
registering” is displayed on all
registered handsets.
L When you purchase an additional handset,
refer to the additional handset’s installation
manual for registration.
Deregistering a handset
A handset can cancel its own registration to
the base unit or other handsets registered to
the same base unit. This allows the handset to
end its wireless connection with the system.
1
{MENU}(131
L All handsets registered to the base
unit are displayed.
2
{r}: Select the handset you want to
cancel. s {SELECT}
3
4
{r}: “Yes” s {SELECT}
{OFF}
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Caller ID Service
phonebook, the stored name in the phonebook
is displayed and logged in the caller list.
Using Caller ID service
Talking Caller ID
This feature lets you know who is calling
without looking at the display.
Important:
L This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to a
Caller ID service. Contact your service
provider/telephone company for details.
To use this feature, you must:
– subscribe to a Caller ID service of your
service provider/telephone company.
– turn this feature on (page 21).
Caller ID features
When an outside call is being received, the
caller’s name and phone number are
displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
When caller information is received, the
handsets and base unit announce the caller’s
name or phone number received from your
service provider/telephone company following
every ring.
The unit announces in English only.
L If the unit cannot receive caller information,
the following is displayed:
L Name pronunciation may vary. This feature
may not pronounce all names correctly.
– “Out of area”: The caller dials from
an area which does not provide a Caller
ID service.
– “Private caller”: The caller
requests not to send caller information.
L Caller ID service has a limit of how many
characters can be displayed. If the caller’s
name is too long, the handset may not be
able to display or announce the entire
name.
L The announcement is heard at the same
level as the ringer volume (page 14, 15, 20).
– “Long distance”: The caller makes a
long distance call.
L If you turn on the answering system and set
the number of rings “2 rings” (page 33),
the unit does not announce the caller
L If the unit is connected to a PBX system,
caller information may not be properly
received. Contact your PBX supplier.
information. If “Toll saver” is selected
and there is a new message, the unit does
not announce the caller information.
L When you receive a call while on the phone,
the 2nd caller’s name is not announced
even if you subscribe to both Caller ID and
Call Waiting with Caller ID services.
Missed calls
If a call is not answered, the unit treats it as a
missed call. The display shows “Missed
call”. This lets you know if you should view
the caller list to see who called while you were
away.
Note:
Phonebook name announcement
L Even when there are unviewed missed
calls,“Missed call” disappears from the
standby display if the following operation is
performed by one of the registered
handsets:
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name in the phonebook
is announced.
– Being replaced on the base unit or
charger.
– Pressing {OFF}.
Ringer ID
This feature can help you identify who is
calling by using different ringer tones for
different groups of callers. When adding an
entry to the phonebook, you can assign it to
the desired group (page 17). When a call is
received from a caller assigned to a group, the
Phonebook name display
When caller information is received and it
matches a phone number stored in the
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Caller ID Service
ringer you selected for that group rings after
caller information is displayed. If you select
“Current ringer” (default), the unit uses
the ringer tone you selected on page 20 when
calls from this group are received.
Editing a caller’s phone number
You can edit a phone number in the caller list
by removing its area code and/or the long
distance code “1”.
1
2
3
{C} s {MENU}
{r}: “Group” s {SELECT}
1
2
3
{<} CID
{r}: Select the desired group. s
{SELECT}
{r}: Select the desired entry.
Press {EDIT} repeatedly until the phone
number is shown in the desired format.
4
5
6
{r}: Select the current setting of the
ringer ID. s {SELECT}
1
2
3
Local phone number
Example: 321-5555
{r}: Select the desired ringer tone. s
{SAVE}
Area code – Local phone number
Example: 555-321-5555
{OFF}
1 – Area code – Local phone number
Example: 1-555-321-5555
Caller list
Important:
4
{C}
L Only 1 person can access the caller list at a
time.
L Make sure the unit’s date and time setting is
correct (page 12).
Caller ID number auto edit feature
Once you call back an edited number, the
handset which was used to call back
remembers the area code and format of the
edited number. The next time someone calls
from the same area code, caller information is
customized by the handset as follows:
– When the call is being received, the Caller
ID number is displayed in the same format
as the edited number.
Viewing the caller list and calling
back
1
2
{<} CID
Press {V} to search from the most recent
call, or {^} to search from the oldest call.
– After the call has ended, the caller’s phone
number is displayed in the same format as
the edited number, when reviewed from the
caller list.
L If > is displayed, not all of the
information is shown. To see the
remaining information, press {>}. To
return to the previous screen, press
{<}.
For example, you can use this feature to set
the handset to ignore the area code of callers
in your area, so that you can call these local
numbers using caller information without
dialing the area code.
To activate this feature, you must edit an entry
in the caller list, then call that number. After
that, phone numbers from that caller’s area
code are edited automatically.
3
To call back, press {C}.
To exit, press {OFF}.
Note:
L If the entry has already been viewed or
answered, “Q” is displayed, even if it was
viewed or answered using another handset.
This feature can be set for each handset (page
21). The default setting is “On”.
Note:
L Phone numbers from the 4 most recently
edited area codes are automatically edited.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Caller ID Service
L If you move to another area, you can turn
this feature off to erase previously edited
area codes. To use this feature again, turn it
on and reprogram the area codes you want
to edit once again.
Erasing selected caller
information
1
2
3
{<} CID
{r}: Select the desired entry.
{ERASE} s {r}: “Yes” s {SELECT}
s {OFF}
Erasing all caller information
1
2
{<} CID
{ERASE} s {r}: “Yes” s {SELECT}
s {OFF}
Storing caller information to the
phonebook
1
2
{<} CID
{r}: Select the desired entry.
L To edit the number, press {EDIT}
repeatedly until the phone number is
shown in the desired format.
3
4
5
{SAVE}
{r}: “Phonebook” s {SELECT}
Continue from step 2, “Editing entries”,
page 18.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Answering System
Answering system
The answering system can answer and record
calls for you when you are unavailable to
answer the phone.
Turning the answering
system on/off
Base unit
You can also set the unit to play a greeting
message but not to record caller messages by
selecting “Greeting only” as the recording
time setting (page 33).
Press {ANSWER ON/OFF} to turn on/off the
answering system.
Handset
Important:
L Only 1 person can access the answering
system (listen to messages, record a
greeting message, etc.) at a time.
L When callers leave messages, the unit
records the day and time of each message.
Make sure the date and time have been set
correctly (page 12).
1
2
To turn on:
{MENU}(327
To turn off:
{MENU}(328
{OFF}
Note for base unit and handset:
L When the answering system is turned on:
– The ANSWER ON/OFF indicator on the
base unit lights up.
Memory capacity (including your
greeting message)
The total recording capacity is about 18
minutes. A maximum of 64 messages can be
recorded.
– The message counter on the base unit
displays the total number of messages
(old and new).
Note:
Call screening
L When message memory becomes full:
– “Messages full” is shown on the
handset display.
– The ANSWER ON/OFF indicator on the
base unit flashes rapidly if the answering
system is turned on.
While a caller is leaving a message, you can
listen to the call through the unit’s speaker. To
adjust the speaker volume, press {^} or {V}
repeatedly. You can answer the call by
pressing {C}. Call screening can be set for
each handset. The default setting is “On”.
– The message counter on the base unit
flashes if the answering system is turned
on.
– If you use the pre-recorded greeting
message, the unit automatically switches
to another pre-recorded greeting
message asking callers to call again
later.
– If you recorded your own greeting
message, the same message is still
announced to callers even though their
messages are not recorded.
1
2
{MENU}(31)
{r}: Select the desired setting. s
{SAVE} s {OFF}
Greeting message
When the unit answers a call, a greeting
message is played to callers.
You can use either:
– your own greeting message
– a pre-recorded greeting message
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Answering System
Recording your greeting
message
Listening to messages
using the base unit
When new messages have been recorded,
{6} on the base unit flashes.
Press {6}.
L If new messages have been recorded, the
base unit plays back new messages.
L If there are no new messages, the base unit
plays back all messages.
1
2
3
{MENU}(3)2
{r}: “Yes” s {SELECT}
After a beep sounds, hold the handset
about 20 cm (8 inches) away and speak
clearly into the microphone (2 minutes
max.).
4
5
Press {STOP} to stop recording.
{OFF}
Operating the answering system
during playback
Using a pre-recorded greeting
message
The unit provides 2 pre-recorded greeting
messages:
– If you erase or do not record your own
greeting message, the unit plays a pre-
recorded greeting asking callers to leave a
message.
Key
Operation
{+} or {-}
Adjust the speaker
volume
{7}
Repeat message*1
{8}
Skip message
– If the message recording time (page 33) is
set to “Greeting only”, callers’
messages are not recorded and the unit
plays a different pre-recorded greeting
message asking callers to call again.
{■} (STOP)
{ERASE}
Stop playback
Erase currently playing
message
*1 If pressed within the first 5 seconds of a
message, the previous message is played.
Resetting to a pre-recorded greeting
message
If you want to use a pre-recorded greeting
message once you record your own greeting
message, you need to erase your own
greeting message.
Erasing all messages
Press {ERASE} 2 times while the unit is not in
use.
1
2
{MENU}(3)4
{YES} s {OFF}
Listening to messages
using the handset
When new messages have been recorded:
– “New message” is displayed.
– The message indicator on the handset
flashes slowly if the message alert feature
is turned on (page 33).
Playing back the greeting
message
1
2
{MENU}(3)3
{OFF}
1
To listen to new messages:
{PLAY}
or
{MENU}(323
Download from Www.Somanuals.com. All Manuals Search And Download.
30
Answering System
L If there are no new messages in the
answering system, {PLAY} is not
displayed.
*2 To resume playback:
{r}: “Playback” s {SELECT}
*3 You can also erase as follows:
{ERASE} s {r}: “Yes” s {SELECT}
To listen to all messages:
{MENU}(324
Calling back (Caller ID
subscribers only)
2
When finished, press {OFF}.
Note:
If caller information is received for the call, you
can call the caller back while listening to a
message.
L To switch to the receiver, press {C}.
Operating the answering system
{MENU} s {r}: “Answering device” s
{SELECT}
1
2
Press {PAUSE} during playback.
Key
Operation
Editing the number before calling
back
{^} or {V}
Adjust the receiver/
speaker volume (during
playback)
1
2
3
Press {PAUSE} during playback.
1 or {<}
2 or {>}
3
Repeat message
(during playback)*1
Press {EDIT} repeatedly until the phone
number is shown in the desired format
(page 27). s {C}
Skip message (during
playback)
Enter the “Settings”
menu
Erasing all messages
1
2
{MENU}(325
4
Play new messages
Play all messages
{r}: “Yes” s {SELECT} s {OFF}
5
6
Play greeting message
76
Record greeting
message
Remote operation
Using a touch-tone phone, you can call your
phone number from outside and access the
unit to listen to messages or change
answering system settings. The unit’s voice
guidance prompts you to press certain dial
keys to perform different operations.
8
Turn answering system
on
Pause message*2
{PAUSE}
9 or {STOP}
Stop recording
Stop playback
)
Turn answering system
off
Remote access code
A 3-digit remote access code must be entered
when operating the answering system
remotely. This code prevents unauthorized
parties from listening to your messages
remotely. The default setting is “111”.
*4*3
Erase currently playing
message
*5
Erase all messages
*6
Reset to a pre-recorded
greeting message
Important:
L To prevent unauthorized access to this
product, we recommend that you regularly
change the remote code.
*1 If pressed within the first 5 seconds of a
message, the previous message is played.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Answering System
1
2
{MENU}(3)6
Remote commands
You can press dial keys to access certain
answering system functions without waiting for
the voice guidance to prompt you.
Enter the desired 3-digit remote access
code.
3
{SAVE} s {OFF}
Key
Operation
Deactivating remote operation
Press * in step 2 on “Remote access code”,
page 31.
L The entered remote access code is deleted.
1
Repeat message
(during playback)*1
2
Skip message
(during playback)
Using the answering system
remotely
4
5
9
Play new messages
Play all messages
1
2
3
Dial your phone number from a touch-
tone phone.
Stop playback*2
Start voice guidance*3
After the greeting message starts, enter
your remote access code.
)
Turn answering system off
Follow the voice guidance prompts as
necessary or control the unit using remote
commands (page 32).
*4
Erase currently playing
message
*5
Erase all messages
4
When finished, hang up.
*(
End remote operation
(or hang up)
Voice guidance
■ When the English voice guidance is
selected
During remote operation, the unit’s voice
guidance starts and prompts you to press
1 to perform a specific operation, or press
2 to listen to more available operations.
■ When the Spanish voice guidance is
selected
*1 If pressed within the first 5 seconds of a
message, the previous message is played.
*2 For English voice guidance only
*3 For Spanish voice guidance only
Turning on the answering system
remotely
If the answering system is off, you can turn it
on remotely.
To start the voice guidance, press 9. The
voice guidance announces the available
remote commands (page 32).
1
2
3
Dial your phone number from a touch-
tone phone.
Note:
Let the phone ring 15 times.
L A long beep is heard.
L If you do not press any dial keys within 10
seconds after a voice guidance prompt, the
unit disconnects your call.
Enter your remote access code within 10
seconds after the long beep.
L The greeting message is played back.
L You can either hang up, or enter your
remote access code again and begin
remote operation (page 31).
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Answering System
– Change the number of rings of the voice
mail service so that the answering
system can answer the call first. To do
so, contact your service provider/
telephone company.
Answering system settings
Number of rings before the unit
answers a call
You can change the number of times the
phone rings “Ring count” before the unit
answers calls. You can select 2 to 7 rings, or
“Toll saver”.
Caller’s recording time
You can change the maximum message
recording time allowed for each caller. The
default setting is “3 min”.
1
2
{MENU}(3)5
The default setting is “4 rings”.
“Toll saver”: The unit’s answering system
answers at the end of the 2nd ring when new
messages have been recorded, or at the end
of the 5th ring when there are no new
messages. If you call your phone from outside
to listen to new messages (page 31), you know
that there are no new messages when the
phone rings for the 3rd time. You can then
hang up without being charged for the call.
{r}: Select the desired setting. s
{SAVE} s {OFF}
Selecting “Greeting only”
You can select “Greeting only” which sets
the unit to announce a greeting message to
callers but not record messages.
Select “Greeting only” in step 2 on
“Caller’s recording time”, page 33.
1
2
{MENU}(211
Note:
{r}: Select the desired setting. s
{SAVE} s {OFF}
L When you select “Greeting only”:
– If you do not record your own message,
the unit will play the pre-recorded
greeting-only message asking callers to
call again later.
– If you use your own message, record the
greeting-only message asking callers to
call again later (page 30).
For voice mail service subscribers
If you subscribe to a flat-rate service package
that includes Caller ID, call waiting, voice mail,
and unlimited local/regional/long distance
calls, please note the following:
L To use the voice mail service provided by
your service provider/telephone company
rather than the unit’s answering system,
turn off the answering system (page 29).
L To use this unit’s answering system rather
than the voice mail service provided by your
service provider/telephone company,
please contact your service provider/
telephone company to deactivate your
voice mail service.
Message alert
You can select whether or not the message
indicator on the handset flashes slowly when
new messages are recorded. The default
setting is “On”.
Important:
L If you stored the voice mail access number
(page 34), the message indicator also
flashes for newly recorded voice mail
messages (page 34).
If your service provider/telephone company
cannot do this:
1
2
{MENU}(34)
– Set this unit’s “Ring count” setting so
that this unit’s answering system
answers calls before the voice mail
service of your service provider/
telephone company does. It is necessary
to check the number of rings required to
activate the voice mail service provided
by your service provider/telephone
company before changing this setting.
{r}: Select the desired setting. s
{SAVE} s {OFF}
Note:
L While message alert is on, battery
operating time is shortened (page 10).
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Voice Mail Service
Example:
Voice mail service
1-222-333-4444
PPPP
8888
Voice mail is an automatic answering service
offered by your service provider/telephone
company. After you subscribe to this service,
your service provider/telephone company’s
voice mail system answers calls for you when
you are unavailable to answer the phone or
when your line is busy. Messages are
recorded by your service provider/telephone
company, not your telephone. Please contact
your service provider/telephone company for
details of this service.
VM access
number
Pauses Password
To erase the voice mail access
number
1
2
{MENU}(331
Press and hold {CLEAR} until all digits
are erased. s {SAVE} s {OFF}
Important:
L To use the voice mail service provided by
your service provider/telephone company
rather than the unit’s answering system,
turn off the answering system (page 29).
For details, see page 33.
L You need to store the voice mail access
number to activate the message alert
feature (page 33) for voice mail service.
Voice mail (VM) tone detection
sends special signals (sometimes called
“voice mail tones” or “stutter tones”) to the unit
to let you know you have new voice mail
messages. If you hear a series of dial tones
followed by a continuous dial tone after you
press {C}, you have new voice mail
messages. Soon after you hang up a call or
after the phone stops ringing, your unit checks
the phone line to see if new voice mail
messages have been recorded.
Storing the voice mail (VM)
access number
In order to listen to your voice mail messages,
you must dial your service provider/telephone
company’s voice mail access number. Once
you have stored your voice mail access
number, you can dial it automatically (page
34).
Turn this feature off when:
– You do not subscribe to voice mail service.
– Your service provider/telephone company
does not send voice mail tones.
– Your phone is connected to a PBX.
If you are not sure which setting is required,
contact your service provider/telephone
company.
1
2
{MENU}(331
Enter your access number (24 digits
max.). s {SAVE} s {OFF}
Note:
Turning VM tone detection on/off
L When storing your voice mail access
number and your mailbox password, press
{PAUSE} to add pauses (page 14) between
the access number and the password as
necessary. Contact your service provider/
telephone company for the required pause
time.
The default setting is “On”.
1
2
{MENU}(332
{r}: Select the desired setting. s
{SAVE} s {OFF}
Listening to voice mail messages
The unit lets you know that you have new
voice mail messages in the following ways:
– “New Voice Mail” is displayed on the
handset if message indication service is
available.
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Voice Mail Service
– The message indicator on the handset
flashes slowly if the message alert feature
is turned on (“Message alert”, page 33).
1
{VM}
or
{MENU}(33)
L The speakerphone turns on.
L If there are no new messages in the
voice mail, {VM} is not displayed.
2
3
Follow the pre-recorded instructions.
When finished, press {OFF}.
Note:
L If the handset still indicates there are new
messages even after you have listened to
all new messages, turn it off by pressing
and holding ( until the handset beeps.
L If your voice mail service uses voice mail
tones and a message is over 3 minutes
long, the handset may not indicate new
messages.
L If your voice mail service uses voice mail
tones, the tones are heard from any phone
connected to the same line. If you want to
use another phone to listen to voice mail
messages, you have to dial your access
number manually.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Intercom/Locator
Intercom
Intercom calls can be made between
handsets.
Note:
L If you receive an outside call while talking
on the intercom, you hear 2 tones. To
answer the call, press {OFF}, then press
{C}.
L When paging the handset, the paged
handset beeps for 1 minute.
Transferring calls,
conference calls
Outside calls can be transferred or a
conference call with an outside party can be
made between 2 handsets.
1
2
3
During an outside call, press {INT} to put
the call on hold.
{r}: Select the desired unit. s
{SELECT}
Wait for the paged party to answer.
L If the paged party does not answer,
press {C} to return to the outside call.
Making an intercom call
1
2
{MENU} s {INT}
4
To complete the transfer:
Press {OFF}.
{r}: Select the desired unit. s
{SELECT}
L The outside call is being routed to the
destination unit.
L To stop paging, press {OFF}.
3
When you finish talking, press {OFF}.
To establish a conference call:
{MENU} s {r}: “Conference” s
{SELECT}
L To leave the conference, press {OFF}.
The other 2 parties can continue the
conversation.
L To put the outside call on hold:
{MENU} s {r}: “Hold” s
{SELECT}
Answering an intercom call
1
2
Press {C} to answer the page.
When you finish talking, press {OFF}.
To resume the conference: {MENU}
s {r}: “Conference” s
{SELECT}
Handset locator
You can locate a misplaced handset by paging
it.
Answering a transferred call
Press {C} to answer the page.
1
2
Base unit: Press {LOCATOR}.
L All registered handsets beep for 1
minute.
To stop paging:
Base unit: Press {LOCATOR}.
Handset: Press {OFF}.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
Useful Information
3
Insert the hooks on the wall mounting
adaptor into holes 1 and 2 on the base
unit.
Wall mounting
Note:
L Make sure that the wall and the fixing
method are strong enough to support the
weight of the unit.
2
1
Base unit
1
Lead the AC adaptor cord and telephone
line cord through the hole in the wall
mounting adaptor in the direction of the
arrow.
2
1
4
Adjust the adaptor to hold the base unit,
then push it in the direction of the arrow
until it clicks into place.
2
Tuck the telephone line cord inside the
wall mounting adaptor (A). Connect the
AC adaptor cord and telephone line cord
(B).
B
A
Hooks
AC adaptor cord
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Useful Information
5
Mount the unit on a wall then slide down
to secure in place.
To remove the wall mounting adaptor
While pushing down the release levers (A),
remove the adaptor (B).
AC adaptor cord
A
A
1
83 mm
(31/4 inches)
or
B
102 mm
(4 inches)
Charger
2
Drive the screws (not supplied) into the wall.
25.4 mm
(1 inch)
Wall phone plate
83 mm
102 mm
(4 inches)
(3 1/4 inches)
Screws
1
2
Hooks
Download from Www.Somanuals.com. All Manuals Search And Download.
38
Useful Information
Error messages
Display message
Cause/solution
Base no power
L The handset has lost communication with the base
unit. Move closer to the base unit and try again.
or
L Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
L The handset’s registration may have been canceled.
Re-register the handset (page 25).
No link. Re-connect base AC
adaptor.
Busy
L The called unit is in use.
L Other units are in use and the system is busy. Try
again later.
L The handset you are using is too far from the base
unit. Move closer and try again.
Call phone company for your
access #
L You have not stored the voice mail access number.
Store the number (page 34).
Check tel line
L The supplied telephone line cord has not been
connected yet or not connected properly. Check the
connections (page 9).
Error!!
Invalid
L Recording was too short. Try again.
L There is no handset registered to the base unit
matching the handset number you entered.
L The handset is not registered to the base unit.
Register the handset (page 25).
Requires subscription to
Caller ID.
L You must subscribe to a Caller ID service. Once you
receive caller information after subscribing to a
Caller ID service, this message will not be displayed.
Use rechargeable battery.
L A wrong type of battery such as Alkaline or
Manganese was inserted. Use only the rechargeable
Ni-MH batteries noted on page 4, 6.
Download from Www.Somanuals.com. All Manuals Search And Download.
39
Useful Information
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect the base unit’s
AC adaptor, then reconnect the base unit’s AC adaptor. Remove the batteries from the handset,
and then insert the batteries into the handset again.
General use
Problem
Cause/solution
The handset does not turn on
even after installing charged
batteries.
L Place the handset on the base unit or charger to turn on
the handset.
The unit does not work.
L Make sure the batteries are installed correctly (page 9).
L Fully charge the batteries (page 9).
L Check the connections (page 9).
L Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
L The handset has not been registered to the base unit.
Register the handset (page 25).
I cannot hear a dial tone.
L The base unit’s AC adaptor or telephone line cord is not
connected. Check the connections.
L Disconnect the base unit from the telephone line and
connect the line to a known working telephone. If the
working telephone operates properly, contact our service
personnel to have the unit repaired. If the working
telephone does not operate properly, contact your service
provider/telephone company.
The indicator on the handset
flashes slowly.
L New messages have been recorded. Listen to the new
messages (page 30).
L New voice mail messages have been recorded. Listen to
the new voice mail messages (page 34).
Programmable settings
Problem
Cause/solution
The display is in a language I
cannot read.
L Change the display language (page 13).
I cannot register a handset to a L The maximum number of handsets (6) is already
base unit.
registered to the base unit. Cancel unused handset
registrations from the base unit (page 25).
Download from Www.Somanuals.com. All Manuals Search And Download.
40
Useful Information
Battery recharge
Problem
Cause/solution
L Battery charge is low. Fully charge the batteries (page 9).
The handset beeps and/or )
flashes.
I fully charged the batteries, but L Clean the battery ends (S, T) and the charge contacts
with a dry cloth and charge again.
–
) still flashes,
L It is time to replace the batteries (page 9).
–
0 is displayed, or
– the operating time seems to
be shorter.
Making/answering calls, intercom
Problem
Cause/solution
_ is displayed.
L The handset is too far from the base unit. Move closer.
L The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
L The handset is not registered to the base unit. Register it
(page 25).
Noise is heard, sound cuts in
and out.
L You are using the handset or base unit in an area with
high electrical interference. Re-position the base unit and
use the handset away from sources of interference.
L Move closer to the base unit.
L If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
The handset does not ring.
L The ringer volume is turned off. Adjust the ringer volume
(page 14).
L Silent mode is turned on. Turn it off (page 23).
The base unit does not ring.
I cannot make a call.
L The ringer volume is turned off. Adjust the ringer volume
(page 15).
L The dialing mode may be set incorrectly. Change the
setting (page 13).
L The handset is too far from the base unit. Move closer
and try again.
I cannot make long distance
calls.
L Make sure that you have long distance service.
Download from Www.Somanuals.com. All Manuals Search And Download.
41
Useful Information
Caller ID/Talking Caller ID
Problem
Cause/solution
Caller information is not
displayed.
L You must subscribe to Caller ID service. Contact your
service provider/telephone company for details.
equipment such as a Caller ID box or cordless telephone
line jack, plug the unit directly into the wall jack.
L If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
L The name display service may not be available in some
areas. Contact your service provider/telephone company
for details.
L Other telephone equipment may be interfering with this
unit. Disconnect the other equipment and try again.
Caller information is displayed L Depending on your service provider/telephone company,
or announced late.
the unit may display or announce the caller’s information
at the 2nd ring or later.
L Move closer to the base unit.
Caller information is not
announced.
L The handset or base unit’s ringer volume is turned off.
Adjust it (page 15, 20).
L The Talking Caller ID feature is turned off. Turn it on (page
21).
L The number of rings for the answering system is set to “2
rings” or “Toll saver”. Select a different setting
(page 33).
The caller list/incoming phone
numbers are not edited
automatically.
L The Caller ID number auto edit feature is turned off. Turn
it on and try again (page 21).
L You need to call back the edited number to activate Caller
ID number auto edit.
I cannot dial the phone number L The phone number you dialed might have been edited
edited in the caller list.
incorrectly (for example, the long distance “1” or the area
code is missing). Edit the phone number with another
pattern (page 27).
Time on the unit has shifted.
L Incorrect time information from incoming Caller ID
changes the time. Set the time adjustment to “Manual”
(off) (page 21).
The 2nd caller’s information is L In order to use Caller ID, call waiting, or Call Waiting
not displayed during an outside
call.
Caller ID (CWID), you must first contact your service
provider/telephone company and subscribe to the desired
service.
After subscribing, you may need to contact your service
provider/telephone company again to activate this
specific service, even if you already subscribed to both
Caller ID and Call Waiting with Caller ID services (CWID).
Download from Www.Somanuals.com. All Manuals Search And Download.
42
Useful Information
Answering system
Problem
Cause/solution
The unit does not record new
messages.
L The answering system is turned off. Turn it on (page 29).
L The message memory is full. Erase unnecessary
messages (page 30).
L The recording time is set to “Greeting only”. Change
the setting (page 33).
L If you subscribe to a voice mail service, messages are
recorded by your service provider/telephone company,
not your telephone. Change the unit’s number of rings
setting or contact your service provider/telephone
company (page 33).
I cannot operate the answering L Someone is using the unit. Wait for the other user to
system.
finish.
L A caller is leaving a message. Wait for the caller to finish.
L The handset is too far from the base unit. Move closer.
I cannot operate the answering L The remote access code is not set. Set the remote access
system remotely.
code (page 31).
L You are entering the wrong remote access code. If you
have forgotten your remote access code, enter the
remote access code setting to check your current code
(page 31).
L Press each key firmly.
L The answering system is turned off. Turn it on (page 32).
Liquid damage
Problem
Cause/solution
Liquid or other form of moisture L Disconnect the AC adaptor and telephone line cord from
has entered the handset/base
unit.
the base unit. Remove the batteries from the handset and
leave to dry for at least 3 days. After the handset/base
unit are completely dry, reconnect the AC adaptor and
telephone line cord. Insert the batteries and charge fully
before use. If the unit does not work properly, contact an
authorized service center.
Caution:
L To avoid permanent damage, do not use a microwave oven to speed up the drying process.
Download from Www.Somanuals.com. All Manuals Search And Download.
43
Useful Information
FCC and other information
This equipment complies with Part 68 of the
FCC rules and the requirements adopted by
the ACTA. On the bottom of this equipment
is a label that contains, among other
information, a product identifier in the
format US:ACJ----------.
If requested, this number must be provided
to the telephone company.
L Registration No.............(found on the
bottom of the unit)
telephone company will notify the customer
as soon as possible. Also, you will be
advised of your right to file a complaint with
the FCC if you believe it is necessary.
The telephone company may make changes
in its facilities, equipment, operations or
procedures that could affect the operation of
the equipment. If this happens the
telephone company will provide advance
notice in order for you to make necessary
modifications to maintain uninterrupted
service.
L Ringer Equivalence No. (REN).......0.1B
A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with the
applicable FCC Part 68 rules and
If trouble is experienced with this
equipment, for repair or warranty
requirements adopted by the ACTA. A
compliant telephone cord and modular plug
is provided with the product. It is designed
to be connected to a compatible modular
jack that is also compliant.
information, please contact a Factory
Service Center or other Authorized Servicer.
If the equipment is causing harm to the
telephone network, the telephone company
may request that you disconnect the
equipment until the problem is resolved.
The REN is used to determine the number
of devices that may be connected to a
telephone line. Excessive RENs on a
telephone line may result in the devices not
ringing in response to an incoming call. In
most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain
of the number of devices that may be
connected to a line, as determined by the
total RENs, contact the local telephone
company. For products approved after July
23, 2001, the REN for the product is part of
the product identifier that has the format
US:AAAEQ##TXXXX. The digits
Connection to party line service is subject to
state tariffs. Contact the state public utility
commission, public service commission or
corporation commission for information.
If your home has specially wired alarm
equipment connected to the telephone line,
ensure the installation of this equipment
does not disable your alarm equipment. If
you have questions about what will disable
alarm equipment, consult your telephone
company or a qualified installer.
represented by ## are the REN without a
decimal point (e.g., 03 is a REN of 0.3).
This equipment is hearing aid compatible as
defined by the FCC in 47 CFR Section
68.316.
If this equipment causes harm to the
telephone network, the telephone company
will notify you in advance that temporary
discontinuance of service may be required.
But if advance notice isn't practical, the
When you hold the phone to your ear, noise
might be heard in your Hearing Aid. Some
Hearing Aids are not adequately shielded
from external RF (radio frequency) energy. If
Download from Www.Somanuals.com. All Manuals Search And Download.
44
Useful Information
noise occurs, use an optional headset
accessory or the speakerphone option (if
applicable) when using this phone. Consult
with your audiologist or Hearing Aid
manufacturer about the availability of
Hearing Aids which provide adequate
shielding to RF energy commonly emitted
by digital devices.
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
– Reorient or relocate the receiving
antenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
WHEN PROGRAMMING EMERGENCY
NUMBERS AND(OR) MAKING TEST
CALLS TO EMERGENCY NUMBERS:
1) Remain on the line and briefly explain to
the dispatcher the reason for the call.
2) Perform such activities in the off-peak
hours, such as early morning or late
evenings.
– Consult the dealer or an experienced
radio/TV technician for help.
Some cordless telephones operate at
frequencies that may cause interference to
nearby TVs and VCRs. To minimize or
prevent such interference, the base of the
cordless telephone should not be placed
near or on top of a TV or VCR. If
interference is experienced, move the
cordless telephone further away from the TV
or VCR. This will often reduce or eliminate
interference.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Privacy of communications may not be
ensured when using this phone.
FCC RF Exposure Warning:
L This product complies with FCC radiation
exposure limits set forth for an
uncontrolled environment.
CAUTION:
Any changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate this device.
L To comply with FCC RF exposure
requirements, the base unit must be
installed and operated 20 cm (8 inches)
or more between the product and all
person’s body (excluding extremities of
hands, wrist and feet).
L This product may not be collocated or
operated in conjunction with any other
antenna or transmitter.
L For body-worn operation, the handset
must be used only with a non-metallic
accessory. Use of other accessories may
not ensure compliance with FCC RF
exposure requirements.
NOTE:
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the
instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Useful Information
Notice
L FCC ID can be found inside the battery
compartment or on the bottom of the units.
Compliance with TIA-1083 standard:
Telephone handsets identified with this logo
have reduced noise and interference when
used with T-Coil equipped hearing aids and
cochlear implants.
Compatible with
Hearing Aid T-Coil
T
TIA-1083
Download from Www.Somanuals.com. All Manuals Search And Download.
46
Guía Rápida Española
Guía Rápida Española
Instalación
Unidad base
“Clic”
L Use solo el adaptador de corriente Panasonic PNLV226 incluido.
Ganchos
Oprima firmemente
el contacto.
Gancho
Correcto
Incorrecto
(120 V CA, 60 Hz)
A la toma de
teléfono de línea
única (RJ11C)
“Clic”
Filtro DSL/ADSL*
*Requiere un filtro DSL/ADSL (no incluido) si tiene este tipo de servicio.
Auricular
CARGUE
APROXIMADAMENTE
DURANTE 7 HORAS
L UTILICE SOLO baterías de Ni-MH tamaño AAA (R03).
L NO utilice baterías Alcalinas, de Manganeso o de Ni-Cd.
L Compruebe que las polaridades son las correctas (S, T).
Confirme que
aparezca
SOLO baterías Ni-MH recargables
“Cargando”.
Cargador
(120 V CA, 60 Hz)
L Use solo el adaptador de
corriente Panasonic
PNLV226 incluido.
Download from Www.Somanuals.com. All Manuals Search And Download.
47
Guía Rápida Española
Sugerencias de operación
Teclas de función
El auricular incluye 3 teclas de función. Al oprimir una tecla de
función, puede seleccionar la función que aparece directamente
encima de ella en la pantalla.
{
C
}
,
{
MENU
}
,
{REMR.} y otras funciones adicionales se asignan
a las teclas de función. Preste atención a la pantalla para ver qué
funciones están asignadas a las teclas de función durante la
operación del auricular.
Tecla navegadora
-
-
{^}
,
{V}
,
{
<
}
, o
{
>
}
: Navegue por diversas listas y elementos.
Subir volumen
?
VOL. (Volumen: {^}
o
{V}): Ajuste el volumen del receptor o
{^}
el altavoz mientras habla.
CID (identificador de llamadas): Vea la lista de personas
que llamaron.
REDIAL (remarcación): Vea la lista de remarcación.
{<}
-
-
{<}
{>}
{>}
{V}
Bajar volumen
Cambio de idiomas (Auricular) (predeterminado: “English”)
Cuando instale las baterías por primera vez, es posible que aparezca
Oprima OFF para salir.
Idioma de la pantalla
MENU 11) s
Idioma de la guía de voz
MENU 112
“Date and time Press SELECT”.
{
}
{
}
(
{
r
}
:
:
“
Español
Español
”
”
s
s
{
GUARDA
}
}
s
s
{
OFF
}
}
{
}
(
s
{r
}
“
{GUARDA
{OFF
Fecha y hora (Auricular)
1
2
3
4
{
MENU
}
(1)1
Introduzca el día, mes y año actuales.
Introduzca la hora y minuto actuales (formato de reloj de 24 horas).
s {OK}
{GUARDA OFF
}
s
{
}
Operaciones básicas
Cómo hacer y contestar llamadas (Auricular)
Para hacer llamadas
Para contestar llamadas
Para colgar
Marque el número telefónico.
{C} {s}
OFF
Oprima {^} {V} repetidamente mientras habla.
s
{C}/{s}
/
{
}
Para ajustar el volumen del
receptor o del altavoz
o
Cómo hacer una llamada usando
la lista de remarcación
{
REMR.
deseado.
}
o
s
{
>
{C}
}
REDIAL
s
{r}: Seleccione el número telefónico
Download from Www.Somanuals.com. All Manuals Search And Download.
48
Guía Rápida Española
Operaciones básicas
Cómo hacer y contestar llamadas (Auricular)
Para ajustar el volumen del timbre
del auricular
1
2
{
MENU
}
(16)
{r
}: Seleccione el volumen deseado.
s
{GUARDA}s
{OFF}
Directorio telefónico compartido (Auricular)
Para añadir entradas
Para hacer llamadas
1
2
3
{
C
}
s
{
AÑAD.
Introduzca el nombre de la persona (máx. 16 caracteres).
Introduzca el número telefónico de la persona (máx. 24 dígitos).
}
s
{
OK
s
}
{OK
}
4
{r
}: Seleccione el grupo deseado.
s
{
SELEC.
}
2 veces
s
{OFF}
{C
}
s
{r
}
: Seleccione la entrada deseada. {C}
s
Sistema contestador de llamadas (Unidad base)
Contestador encendido/apagado Oprima ANSWER ON/OFF para encender y apagar el contestador de
{
}
llamadas.
Para escuchar mensajes
{6}
Sistema contestador de llamadas (Auricular)
Para escuchar mensajes
Para escuchar mensajes nuevos:
REPRO. MENU 323
Para escuchar todos los mensajes:
MENU 324
{
}
o
{
}
(
{
}
(
Preguntas frecuentes
Pregunta
Causa y solución
¿Por qué aparece
_
?
L
L
El auricular está demasiado lejos de la unidad base. Acérquelo.
El adaptador para corriente de la unidad base no está conectado
correctamente. Conecte de nuevo el adaptador para corriente a la
unidad base.
L
El auricular no está registrado en la unidad base. Regístrelo.
1
2
Auricular:
{
MENU
}
(13)
Unidad base: Oprima y mantenga oprimido
aproximadamente 5 segundos hasta que suene el tono de
registro.
{
LOCATOR} durante
3
Auricular: Oprima {OK}, y después espere a que se emita un
pitido largo.
¿Cómo se incrementa el nivel de
volumen del auricular?
L
Oprima la tecla de navegación {^} repetidamente mientras habla.
¿Por qué hay ruido o se corta la
conversación?
L
L
Trate de reubicar la unidad base de forma que se minimice la
distancia al auricular.
Si ocurre el mismo problema aunque el auricular se encuentre
enseguida de la unidad base, llame a soporte al cliente de Panasonic
al 1-800-211-PANA (1-800-211-7262).
Download from Www.Somanuals.com. All Manuals Search And Download.
49
Guía Rápida Española
Preguntas frecuentes
Pregunta
Causa y solución
¿Es posible añadir otro auricular
accesorio a mi unidad base?
L
L
Sí, puede añadir hasta 6 auriculares (incluyendo los que se venden
con su unidad base) a una sola unidad base.
Para adquirir auriculares accesorios adicionales
(KX-TGA410/KX-TGA659/KX-TGA660), visite
o llame al 1-800-332-5368. Los usuarios TTY (usuarios con
impedimentos auditivos o del habla) pueden llamar al 1-866-605-
1277.
¿Es posible mantener cargando
las baterías todo el tiempo?
L
L
Puede dejar el auricular en la unidad base o el cargador en cualquier
momento. Esto no daña las baterías.
¿Cómo se contestan las
llamadas en espera (segunda
llamada)?
Oprima {CALL WAIT} cuando escuche el tono de llamada en espera.
Para obtener más información acerca del registro, visite
http://www.panasonic.com/RegisterYourHandset (solo en inglés)
Download from Www.Somanuals.com. All Manuals Search And Download.
50
Appendix
Customer services
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate your nearest
Dealer or Service Center; purchase Parts and Accessories; or make Customer
Service and Literature requests by visiting our Web Site at:
or, contact us via the web at:
You may also contact us directly at: 1-800-211-PANA (1-800-211-7262),
Monday - Friday 9 am to 9 pm; Saturday - Sunday 10 am to 7 pm, EST.
TTY users (hearing or speech impaired users) can call 1-877-833-8855.
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books online for all
Panasonic Products by visiting our Web Site at:
or, send your request by E-mail to:
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday - Friday 9 am to 9 pm, EST.)
Panasonic Service and Technology Company
20421 84th Avenue South, Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and
Personal Checks.)
TTY users (hearing or speech impaired users) can call 1-866-605-1277.
Download from Www.Somanuals.com. All Manuals Search And Download.
51
Appendix
Warranty (For United States and Puerto Rico)
PANASONIC CORPORATION OF NORTH AMERICA
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Telephone Products
Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship,
Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length
of the period indicated on the chart below, which starts with the date of original purchase
(“Limited Warranty period”), at its option either (a) repair your product with new or
refurbished parts, or (b) replace it with a new or a refurbished product. The decision to
repair or replace will be made by the warrantor.
Parts
Labor
One (1) Year
One (1) Year
During the “Labor” Limited Warranty period there will be no charge for labor. During the
“Parts” Limited Warranty period, there will be no charge for parts. You must mail-in your
product prepaid during the Limited Warranty period. This Limited Warranty excludes both
parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited Warranty
only applies to products purchased and serviced in the United States or Puerto Rico. This
Limited Warranty is extended only to the original purchaser and only covers products
purchased as new.
Ship-In Service
For assistance in the continental United States and Puerto Rico in obtaining repairs please
ship the product prepaid to:
PSTC (Panasonic) Exchange Center,
4900 George McVay Drive, Suite B Door #12, McAllen, TX 78503
When shipping the unit carefully pack in a padded shipping carton, include all
accessories, and send it prepaid. Include a letter detailing the complaint, a return
address and provide a day time phone number where you can be reached. P.O. Boxes
are not acceptable. Keep the tracking number for your records. A copy of valid registered
receipt is required under the 1 year parts and labor Limited Warranty.
For Limited Warranty service for headsets if a headset is included with this
product please follow instructions above.
IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES
RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE,
AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE
CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH
PROOF OF PURCHASE.
Download from Www.Somanuals.com. All Manuals Search And Download.
52
Appendix
Limited Warranty Limits And Exclusions
This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship,
and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty
ALSO DOES NOT COVER damages which occurred in shipment, or failures which are
caused by products not supplied by the warrantor, or failures which result from accidents,
misuse, abuse, neglect, bug infestation, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment of consumer controls, improper
maintenance, power line surge, lightning damage, modification, introduction of sand,
humidity or liquids, commercial use such as hotel, office, restaurant, or other business or
rental use of the product, or service by anyone other than a Factory Service Center or
other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED
WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR
ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this
excludes damages for lost time, lost calls or messages, cost of having someone remove or
re-install an installed unit if applicable, travel to and from the servicer. The items listed are
not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES,
INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE
PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, or limitations on how long an implied warranty lasts, so the exclusions may not
apply to you.
This Limited Warranty gives you specific legal rights and you may also have other rights
which vary from state to state. If a problem with this product develops during or after the
Limited Warranty period, you may contact your dealer or Service Center. If the problem is
not handled to your satisfaction, then write to the warrantor’s Consumer Affairs
Department at the addresses listed for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY,
ARE YOUR RESPONSIBILITY.
When you ship the product
L Carefully pack your unit, preferably in the original carton.
L Attach a letter, detailing the symptom.
L Send the unit to PSTC (Panasonic) Exchange Center, prepaid and adequately insured.
L Do not send your unit to Panasonic Corporation of North America listed on the back
cover or to executive or regional sales offices. These locations do not repair consumer
products.
Download from Www.Somanuals.com. All Manuals Search And Download.
53
Index
Hold: 15
Intercom: 36
Line mode: 21
Mute: 15
Index
I
K
L
M
#
4-way conference: 16
A
Additional handset: 24
Alarm: 23
Answering calls: 14
Answering system
Call screening: 29
Erasing messages: 30, 31, 32
Greeting message: 29
Greeting only: 33
P
R
Pause: 14
Phonebook: 17
Power failure: 10
Redialing: 14
Listening to messages: 30, 32
Number of rings: 33
Recording time: 33
Remote access code: 31
Remote operation: 31
Ring count: 33
Toll saver: 33
Turning on/off: 29, 31, 32
Auto talk: 14
Ringer ID: 26
Silent mode: 23
Troubleshooting: 40
Voice guidance language: 13
Volume
S
T
B
C
Battery: 9, 10
Booster (Clarity booster): 15
Call block: 24
V
Caller ID number auto edit: 27
Caller ID service: 26
Caller list: 27
Caller list edit: 27
Call share: 16, 21
Call waiting: 15
Call Waiting Caller ID: 15
Chain dial: 18
CID (Caller ID): 27
Conference calls: 36
Control type: 11
Ringer (Base unit): 15
Ringer (Handset): 14, 20
Speaker: 14
W
Wall mounting: 37
Customer support: 22
D
E
Date and time: 12
Dialing mode: 13
Direct command code: 19
Display
Contrast: 21
Language: 13
Eco mode: 10
Equalizer: 16
Error messages: 39
F
Flash: 15, 21
G
H
Groups: 17, 26
Handset
Deregistration: 25
Locator: 36
Name: 23
Download from Www.Somanuals.com. All Manuals Search And Download.
54
Notes
55
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT!
If your product is not working properly. . .
1 Reconnect AC adaptor to the base unit.
2 Check if telephone line cord is connected.
3 Use rechargeable Ni-MH batteries.
(Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)
4 Read troubleshooting page in the Operating Instructions.
L
FAQ and troubleshooting hints are available.
For your future reference
We recommend keeping a record of the following information to assist with any repair under
warranty.
Serial No.
Date of purchase
(found on the bottom of the base unit)
Name and address of dealer
Attach your purchase receipt here.
One Panasonic Way, Secaucus, New Jersey 07094
© Panasonic System Networks Co., Ltd. 2010
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
PNQX3013ZA TC1110MG0 (A)
|