Palsonic TV DVD Combo TFTV2035BK User Manual

LCD TV/DVD COMBO  
TFTV2035BK  
USER'S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Instructions  
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended  
to alert the user to the presence of uninsulated “Dangerous Voltage” within the product’s  
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.  
The exclamation point within an equilateral triangle is intended to alert the user to  
the presence of important operating and maintenance (servicing) instructions in the  
literature accompanying the appliance.  
CAUTION: Laser radiation when open. Do note stare into  
beam.  
CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN  
THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.  
CAUTION  
1.  
The product contains a low-power laser device. In order to ensure the safety of the laser device,  
do not remove any cover and attempt to repair the unit. If any service is needed, please contact  
the distributor or its authorised service centre.  
2.  
To reduce the risk of electric shock, do not remove the cover (or back). No user-serviceable  
parts inside. Refer servicing to qualified service personnel. Unplug the product from the wall  
outlet before servicing or when it is unused for a long period of time.  
3.  
4.  
The manufacturer should not hold responsibility for the damage caused by any substitutions  
and modifications of the product without authorisation from the manufacturer or authorised unit.  
Danger of explosion if battery is incorrectly replaced. Replace only with the same  
or equivalent type.  
WARNING  
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,  
such as vases, shall be placed on the apparatus.  
The images in this manual are only for referencr and they may be different  
from the actual ones.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Instructions  
NOTES  
1. Read these instructions.  
IMPORTANT FOR LASER PRODUCTS  
1. CLASS 1 LASER PRODUCT  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus  
near water.  
2. DANGER: Visible laser radiation when open and interlock  
failed or defeated. Avoid direct exposure to beam.  
3. CAUTION: Do not open the top cover. There are no user  
serviceable parts inside the unit. Leave all servicing to  
qualified service personnel.  
6. Clean only with a dry cloth.  
7. Do not block any ventilation openings. Maintain well ventilated conditions around the product.  
Do not put product on bed, sofa or anything that blocks ventilation. Install in according to the  
manufacturer’s instructions.  
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce heat.  
9. Read, heed and follow all instructions to ensure correct and safe installation and  
inter-connection of the apparatus.  
10. The apparatus shall not be exposed to dripping or splashing and no objects filled with  
liquids, such as vases, shall be placed on the apparatus.  
11. The mains socket outlet shall be installed near the apparatus and the mains plug shall remain  
readily operable.  
12. Protect the power cord from being walked on or pinched particularly at plugs, convenience  
receptacles, and the point where they exit from the apparatus.  
13. Only use attachments/accessories specified by the manufacturer.  
14. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold  
with the apparatus. When a cart is used, use caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
15. Unplug this apparatus during lightning storms or when unused for long periods of time.  
16. Refer all servicing to qualified service personnel. Servicing is required when the apparatus  
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has  
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain  
or moisture, does not operate normally, or has been dropped.  
17. The apparatus shall be connected to a mains socket outlet with a protective earthing  
connection.  
Note: Do not touch the colour TFT LCD screen by hand directly.  
Copyright Protection  
This product incorporates copyright protection technology that is protected by U.S. patents and  
other intellectual property rights. Use of this copyright protection technology must be authorised  
by Macrovision, and is intended for home and other limited viewing uses only unless otherwise  
authorised by Macrovision. Reverse engineering or disassembly is prohibited.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Information  
Discs Supported  
DISC LOGO  
CONTENTS  
SIZE  
MAXIMUM TIME  
133min(SS-SL)  
242min(SS-DL)  
266min(DS-SL)  
484min(DS-DL)  
Audio+Video  
(active picture)  
DVD  
12cm  
CD  
Audio  
12cm  
74min  
JPEG  
DIVX  
Still high resolution  
12cm  
12cm  
Operating systems and features of individual DVD discs is specified by the software maker.  
Please refer to the instructions accompanying the disc.  
Disc Terms  
Titles  
A DVD disc is often divided into TITLES. A title can be a separate item or a segment of a film. on  
many disc the ROOT menu and the TITLE menu are the same.  
Chapters  
Each TITLE is subdivided into CHAPTERS and each chapter is numbered for easy searching.  
So by knowing the right command, you can play the whole disc, or any part of the disc.  
Tracks  
Picture and music CDs are divided into TRACKS. Each track is numbered for searching.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
View of Unit  
Front and Right Side Panel  
8
2
2
1. Colour TFT screen  
2. Speakers  
On system setup menu, the same function  
as  
/
direction buttons.  
3. Power Indicator  
9.  
PLAY button  
During work, it is blue; in standby mode, it  
is red.  
Press to start disc playback in DVD mode.  
STOP button  
10.  
11.  
12.  
13.  
14.  
15.  
16.  
4. Remote Sensor  
Press to stop disc playback in DVD mode.  
Eject button  
5. SOURCE button  
Press repeatedly to select TV,  
COMPOSITE, S-VIDEO, COMPONENT,  
VGA or DVD mode.  
Press to eject disc out the unit.  
Power button  
Press to enter or exit standby mode.  
SD/MS/MMC Card Port  
Insert SD/MS/MMC card into this slot.  
Disc Tray Slot  
6. MENU button  
Press to enter or exit system setup menu.  
7. CH  
button  
Press to select channels in TV mode. On  
system setup menu, the same function as  
direction buttons.  
Insert disc into this slot.  
Earphone Jack  
Connect earphone.  
8. VOL  
button  
USB Port  
Press to decrease or increase the volume.  
Connect USB device.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
View of Unit (Continued)  
Back Panel  
Open the back cover on the right side of the unit's rear panel, and you will see all jacks, as shown  
below:  
TV  
PC IN  
AUDIO  
6. S-Video Input Jack  
Connect S-Video signal source in  
S-VIDEO mode.  
1. Y/Pb/Pr Input Jacks  
Connect Y/Pb/Pr signal source in  
COMPONENT mode.  
7. Composite Video Input Jack  
Connect composite video signal source in  
COMPOSITE mode.  
2. L/R Audio Input Jacks (for Y/Pb/Pr)  
Connect L/R audio signal source in  
COMPONENT mode.  
8. TV Signal Input Jack  
Connect TV aerial.  
3. AV Output Jack  
Output TV or COMPOSITE signals to  
external AV input device.  
9. DC 12V Input Jack  
Connect supplied adaptor.  
10. PC Input Jack  
4. L/R Audio Output Jacks  
Output L/R audio signal to external AV  
input device.  
Connect VGA signal source.  
11. PC Audio Input Jack  
Connect VGA audio signal source.  
5. L/R Audio Input Jacks (for composite  
and S-video)  
Connect L/R audio signal source in  
COMPOSITE or S-VIDEO mode.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
5. S.M. button  
View of Remote Control  
Press to shift the sound modes to different  
sound settings : User, Standard, Music,  
Movie and Speech.  
1
6. 0-9 Number buttons  
22  
2
3
4
5
Press to select numbers.  
7. FAV button  
23  
24  
25  
Press to shift to the favourite channel  
8. STEREO/AUDIO button  
In TV mode, press to select sound track  
when receiving NICAM or A2 TV broadcast  
signal; in DVD mode, press to select audio  
language or audio track.  
6
9. VOL+/- button  
26  
7
8
Press to increase or decrease the volume.  
10. MUTE button  
Press to turn on or off speaker output  
11. EXIT button  
27  
28  
29  
9
10  
Press to exit from the setup menu.  
30  
11  
12  
12. Direction buttons (  
In the setup menu, press the  
select items and press the  
adjust or set.  
)
button to  
button to  
13  
14  
31  
13. ENTER button  
Press to confirm selection.  
14. SOURCE button  
32  
33  
15  
16  
17  
34  
Press repeatedly to select TV,  
COMPOSITE, S-VIDEO, COMPONENT,  
VGA and DVD.  
PLAY button  
Press to play the disc in DVD mode.  
PAUSE button  
35  
36  
18  
19  
37  
38  
20  
21  
15.  
16.  
Press to pause playback and press the  
PLAY button to resume normal playback  
during disc playback.  
1. POWER button  
Press to enter or exit standby mode.  
2. TV button  
Press to shift to TV mode.  
3. DVD button  
Press to shift to DVD mode.  
4. P.M. button  
17.  
/
button  
Press to activate fast backward or forward  
playback function in DVD mode.  
18. TITLE button  
When a DVD disc is playing, press the TITLE  
button to go to the title menu and display  
disc contains.  
Under TV, Composite or S-VIDEO mode,  
press to display/close the teletext.  
Press to shift the screen picture modes to  
different brightness settings: User,  
Standard, Soft, Bright and Shine.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
19. MENU button (under DVD mode)  
Press to enter disc menu in DVD mode;  
press to exit teletext mode in teletext  
mode  
32. Eject button  
Press to eject the disc from the unit.  
33. STOP button  
Press to stop disc playback in DVD mode.  
20. SETUP button  
34.  
/
button  
Press to enter or exit setup menu in DVD  
mode; press to display the index page in  
teletext mode.  
Press to go to the previous or next  
list/chapter/track in DVD mode.  
35. REPEAT button  
21. SLOW button  
Press to repeat chapter, title, or all content  
when in DVD mode; press to stop all automatic  
changing of the page consists of two or  
more sub pages in teletext mode.  
36. ANGLE button  
Press to select camera angles if the disc  
contains multiple camera angles during  
disc playback; in teletext mode, press the  
button first time to double the size of  
teletext letters in the upper half of the  
screen, second to double the size of  
teletext letters in the lower half of the  
screen and third to resume normal status.  
37. CARD button  
Press to activate slow playback function in  
DVD mode. In teletext mode, press to  
display the concealed information, such as  
solution to puzzles; press again to  
conceal the information.  
22. D-SUB button  
Press to shift to VGA mode.  
23. YPBPR button  
Press to shift to COMPONENT mode.  
24. DISPLAY button  
Press to display the reference information  
about the current program.  
25. SET FAV button  
Press to set current channel as the  
favourite channel.  
Press to shift among disc playback, USB  
playback and SD/MS/MMC playback mode  
when USB device or card is connected to  
the unit in DVD mode; in teletext mode,  
press to select four groups 3-digit numbers  
that displayed in different colours at the  
bottom of the screen. Press the coloured  
buttons on the remote control to select,  
then use the number buttons to input the  
corresponding number to display the page.  
Repeat the above procedures for each  
page to be stored, using a different colour  
button accordingly each time.  
26.  
/+10 button  
Press to return to the previously viewed  
channel in TV mode; press to select  
numbers greater than 10.  
27. SCAN button  
Press to scan programs in TV mode and  
press again to stop scanning.  
28. CH+/- button  
Press to select channel in TV mode.  
29. SUBTITLE button  
Press to select subtitle language if the disc  
contains multi-subtitle languages during  
disc playback.  
38. GOTO button  
Press to select title or chapter, playback time,  
etc. in DVD mode.  
30. MENU button  
Press to enter or exit the system setup  
menu.  
Press to display the real clock and press  
the EXIT button to exit under TV mode.  
31. SLEEP button  
Press the button and then the ENTER  
button to activate Sleep function. The use  
the  
button to select sleep time after  
which the unit will be turned off automatically.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Connections  
Do not connect the power cord until all other connections have been made.  
Ensure that you observe the colour cables when connecting audio and video cables.  
Before connecting, open the cover on the right side of the unit's rear panel.  
Connecting Power Supply  
Power is supplied through the provided power adapter. Connect one end of the adaptor to the unit's  
power jack on the jack panel of the unit and the other end to the wall AC outlet.  
TV  
To wall AC outlet  
PC IN  
AUDIO  
Connecting Earphone  
Connect earphone (headphone) to earphone jack on the rear panel of the unit for listening.  
After connecting earphone, the internal speaker output will turn off automatically.  
Note: Excessively loud volume could damage your hearing. So turn down the volume before  
connecting earphone, and then raise the volume to comfortable level.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Connections (Continued)  
Connecting External AV Signal Source  
Use the AV cables to connect external AV signal source to AV input jacks on the jack panel of the  
unit. And use the S-Video cable to connect external S-Video signal source to the S-VIDEO input  
jack on the rear panel of the unit.  
TV  
PC IN  
AUDIO  
After connection, turn on the unit and the external AV signal source and press the SOURCE button  
to shift to COMPOSITE or S-VIDEO mode.  
Note: Normal composite Video and S-VIDEO share audio input jacks.  
Connecting External AV Signal Source (YPbPr)  
Use the AV cables to connect external AV signal source to the Y/Pb (Cb) /Pr (Cr) input jacks on the  
jack panel of the unit.  
TV  
PC IN  
AUDIO  
After connection, turn on the unit and external AV signal source and press the SOURCE button to  
shift to COMPONENT mode.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Connections (Continued)  
Connecting External AV Device (AV Output)  
Use the AV cables to connect external AV device to the audio and video output jacks on the jack  
panel of the unit to output TV or COMPOSITE signals.  
TV  
PC IN  
AUDIO  
After connection, turn on the unit and external AV device and press the SOURCE button to shift to  
corresponding mode.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Connections (Continued)  
Connecting PC  
Follow the steps and figure below to connect PC to the unit.  
1. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit and the  
other end to the PC.  
2. Connect one end of the audio cables to the PC audio input jack on the rear panel of the unit  
and the other end to the PC audio output jack.  
3. Set the PC's resolution at 800x600@60Hz.  
TV  
PC IN  
AUDIO  
After connection, turn on the unit and the PC and then press the SOURCE button to shift to VGA  
mode.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Connections (Continued)  
Connecting TV Antenna  
Connect TV signal source to the TV jack on the jack panel of the unit.  
TV  
PC IN  
AUDIO  
After connection, turn on the unit and press the SOURCE button to shift to TV mode. If you have  
been scanned TV programs, take the following steps to select a channel.  
1. Channel Numbers 0-9  
Press the number button to select the channel, after a few seconds the selected channel will  
display- or  
Press the number button to select the channel and then press the /+10 button to go to the  
selected channel immediately- or  
Press 0 followed by the channel number to go to the selected channel immediately.  
2. Channel Numbers 10-99  
Press the number button to select channel XX, after a few seconds the selected channel will  
display- or  
Press the number button to select channel XX, and then press the  
selected channel immediately.  
/+10 button t go to the  
* X denotes the channel number.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Function  
Preparation  
1. After connection, press the POWER button to turn on the unit.  
2. Press the SOURCE button to shift to TV mode. You can go on with the following operations.  
Image Setting  
Image  
Audio  
Timer  
Setup  
Scheme  
Picture  
Press the MENU button once to enter the setup  
menu. Press the button to select Image and  
press the ENTER button to enter the menu  
shown on the right.  
Brightness  
Contrast  
Hue  
In the Image setup menu, press the  
select the desired item. Press the MENU button to  
return to the previous menu.  
button to  
Color  
Sharpness  
Advanced  
Image  
Audio  
Timer  
Setup  
Scheme  
Scheme Setup  
Press the  
button to select Scheme and  
Normal  
Vivid  
press the ENTER button to enter. Press the  
button to select the desired item and press  
the ENTER button to confirm your selection.  
Press the MENU button to return to the previous  
menu.  
Sports  
Nature  
Picture Setup  
Image  
Audio  
Timer  
Setup  
Picture  
Press the  
button to select Picture and  
press the ENTER button to enter. Press the  
button to select the desired item and press  
the ENTER button to confirm your selection.  
Press the MENU button to return to the previous  
menu.  
User  
Standard  
Soft  
Bright  
Shine  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Function  
When the VGA signal is connected to the unit, the Advanced setup menu is shown below:  
Image  
Audio  
Timer  
Setup  
Advanced  
Press the "  
" button to select the desired  
Auto Adjust  
Image Pos  
Phase  
item and press the "ENTER" button to enter it's  
setup menu. Press the "MENU" button to return  
to the previous menu.  
Clock  
Auto Color  
SRGB  
Auto Adjust:  
If the monitor is not clear, you should carry out "Auto Adjust".  
Press the "  
Press the "  
" button to select "Auto Adjust" and press the "ENTER" button to enter it's menu.  
" button to select "Yes" to activate this function or "No" to cancel. Press the "MENU"  
button to return to the previous menu.  
Image Pos:  
Press the "  
" button to select "Image Pos" and press the "ENTER" button to enter it's menu  
Within the menu, press the "  
" button to move the image. Press the "MENU" button to return  
" button to select "Phase". Press the " " button to adjust the value. Press the  
to the previous menu.  
Phase:  
Press the "  
"MENU" button to return to the previous menu.  
Clock:  
Press the "  
" button to select "Clock" and press the "ENTER" button to enter it's menu. Press  
the "  
"button to adjust the value . Press the "MENU" button to return to the previous menu.  
Auto Color:  
Press the "  
" button to select "Auto Color" and press the "ENTER" button to activate this  
function. Press the "MENU" button to return to the previous menu.  
sRGB :  
Press the "  
" button to select "sRGB" and press the "ENTER" button to enter it's menu. Press  
the "  
" button to select "On" to activate this function or "Off" to cancel. Press the "MENU"  
button to return to the previous menu.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Function  
Audio Setting  
Image  
Audio  
Timer  
Setup  
Volume  
Bass  
Press the MENU button once to enter the setup  
menu. Press the  
button to select Audio and  
Treble  
press the ENTER button to enter the menu shown on  
the right.  
Balance  
Auto Volume  
Sound Mode  
In the Audio setup menu, press the  
button to  
select the desired item. Press the EXIT button to  
return to the previous menu.  
Volume Setup  
Press the  
button to select Volume and press the  
button to adjust the level. Press the  
button to adjust the level. Press the MENU  
button to adjust the level. Press the  
button to select Balance and press the button to adjust the level. Press the  
MENU button to return to the previous menu.  
Bass Setup  
Press the  
button to return to the previous menu.  
button to select Bass and press the  
Treble Setup  
Press the  
MENU button to return to the previous menu.  
button to select Treble and press the  
Balance Setup  
Press the  
MENU button to return to the previous menu.  
Auto Volume Setup  
Press the  
Press the  
button to select Auto Volume and press the ENTER button to access the menu.  
button to select "On" or "Off' and press the ENTER button to confirm. Press the  
MENU button to return to the previous menu.  
Sound Mode Setup  
Image  
Audio  
Timer  
Setup  
Sound Mode  
Press the  
button to select Sound Mode and  
press the ENTER button to enter. Press the  
button to select the desired item and then press the  
ENTER button to confirm your selection. Press the  
MENU button to return to the previous menu.  
User  
Standard  
Music  
Movie  
Speech  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Function  
Timer Setting  
Press the MENU button once to enter the setup  
Image  
Audio  
Timer  
Setup  
menu. Press the  
button to select Timer  
and press the ENTER button to enter the menu  
shown on the right.  
Off  
In the Timer setup menu, press the  
button to select Off, 15Min, 30Min, 45Min,  
60Min, 75Min, 90Min, 105Min or 120Min. Press  
the EXIT button to return to the previous menu.  
Setup Setting  
Press the MENU button once to enter the setup  
menu. Press the  
button to select Setup  
Image  
Audio  
Timer  
Setup  
Tuner/Channel  
Language  
Factory Reset  
and press the ENTER button to enter the menu  
shown on the right.  
In the Setup menu, press the  
button to  
select the desired item. Press the EXIT button  
to return to the previous menu.  
Tuner/Channel  
Image  
Audio  
Timer  
Setup  
PAL Tuner/Channel  
Press the  
button to select the  
Tuner/Channel and press the ENTER  
Country  
button to enter the menu shown on the  
right. Press the  
button to select the  
Auto Scan  
Prog Organizer  
Manual Install  
desired item. Press the MENU button to  
return to the previous menu.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Function  
Country  
Image  
Audio  
Timer  
Setup  
PAL Tuner/Channel  
Press the  
button to select  
the Country and press the  
ENTER button to enter the menu  
shown on the right. Press the  
button to select the desired  
item. Press the MENU button to  
return to the previous menu.  
Country Select  
Australia  
Belgium  
Britain  
France  
Czech  
Denmark  
Auto Scan  
Press the  
button to select the Auto Scan and press the ENTER button to start auto scan. The  
screen will display shown below:  
Auto scan  
CH No  
8
FREQ 154.20 MHz  
Auto scan will take a few minutes, when the tuning operation completes the unit will exit and  
memorise the programs by sequence automatically.  
During tuning, press the MENU button to exit the auto scan mode  
Prog Organizer  
Image  
Audio  
Timer  
Setup  
PAL Tuner/Channel  
Press the  
button to select  
the Prog Organizer and press the  
ENTER button to enter the menu  
shown on the right.  
Prog Organizer  
XXXXXXX  
Channel Name  
Skip  
In the Prog Organizer setup  
menu, press the  
button to  
Swap From Ch  
Swap To Ch  
Perform Swap  
select the desired item. Press  
the MENU button to return to the  
previous menu.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Function  
Channel Name  
Press the  
press the  
button to select the Channel Number and press the ENTER button to enter. Then  
button to select letters or press the number buttons to input numbers. Press the  
MENU button to return to the previous menu.  
Skip  
Press the  
button to select Skip and press the ENTER button to activate or cancel this function.  
Press the MENU button to return to the previous menu.  
Swap  
Press the  
button to select Swap from Ch and press the ENTER button to enter. Press the  
number buttons to select program number. Repeat the above operations to Swap To Ch. Then  
Press the  
button to select Perform Swap and press the ENTER button to confirm.  
Image  
Audio  
Timer  
Setup  
PAL Tuner/Channel  
Manual Install  
Press the  
button to select the  
Manual Install  
Manual Install and press the  
ENTER button to enter the menu  
shown on the right.  
47.00 MHz  
Search  
Color System  
Fine Tune  
CH NO  
In the Manual Install setup menu,  
press the  
button to select the  
desired item. Press the MENU  
button to return to the previous  
menu.  
Store  
Search  
Press the  
button to select Search and press the or to start searching forward or  
backward. Press the MENU button to return to the previous menu.  
Colour System  
Press the  
button to select Color System and press the ENTER button to enter. Press the  
MENU button to return to the previous menu.  
Fine Tune  
Press the  
button to select Fine Tune and press the or controls to start fine tuning  
forward or backward.  
This feature allows for minor adjustments to the integrated electronic tuner's ability to tune in weak  
broadcast signals.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Function  
CH NO  
Press the  
button to select CH NO and press the ENTER button to enter. Press the number  
buttons to enter the channel number. Press the button to return to the previous menu.  
Store  
Press the  
button to select Store and press the ENTER button to store the above operations.  
Note: The "CH NO" and "Store" items only function when the program is searched out.  
Language  
Image  
Audio  
Timer  
Setup  
Language  
Press the  
press the ENTER button to enter the setup, press  
the button to select item. Press the MENU  
button to select the Language,  
English  
French  
Spanish  
German  
Italian  
button to return to the previous menu.  
Factory Reset  
Press the  
button to select "Yes" or "No". Select "Yes" and press the ENTER button  
to reset all settings to default status; select "No" and press the ENTER button to cancel factory  
reset and it will return to the previous menu.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NICAM Function  
The unit support NICAM function under TV mode.  
Under NICAM TV broadcast:  
1. When receiving stereo audio signals, press the STEREO/AUDIO button on the remote control  
repeatedly to shift the sound tracks between Nicam Stereo and Mono and the screen will  
appear corresponding display as shown below:  
Mono  
Nicam Stereo  
2. When receiving bilingual audio signals, press the STEREO/AUDIO button on the remote  
control repeatedly to shift the sound tracks among Nicam I, Nicam II, Nicam I+II and Mono  
and the screen will appear corresponding display as shown below:  
Mono  
Nicam I+II  
Nicam II  
Nicam I  
3. When receiving mono audio signals, press the STEREO/AUDIO button on the remote control  
repeatedly to shift the sound tracks between Nicam Mono and Mono and the screen will  
appear corresponding display as shown below:  
Mono  
Nicam Mono  
Under A2 TV broadcast:  
1. When receiving stereo audio signals, press the STEREO/AUDIO button on the remote control  
repeatedly to shift the sound tracks between Stereo and Mono and the screen will appear  
corresponding display as shown below:  
Mono  
Stereo  
2. When receiving bilingual audio signals, press the STEREO/AUDIO button on the remote  
control repeatedly to shift the sound tracks among I, II and I+II and the screen will appear  
corresponding display as shown below:  
II  
I
I + II  
3.  
When receiving mono audio signals, press the STEREO/AUDIO button on the remote control to  
display sound track Mono on the screen.  
Mono  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Playback  
Preparation:  
Disc Loading Steps:  
1. Connect the unit to the power supply and press the POWER to turn on the unit.  
2. Press the SOURCE button and select DVD mode.  
3. Handing the disc with its printed side outward vertically to the disc tray and gently insert the  
disc into the disc tray.  
4. The disc will draw into the unit and load automatically.  
Warning: Do not play poor quality, scratched or warped discs that may damage the player's lens  
or impede the loading mechanism.  
DVD Playback  
Region Code  
DVD players and discs are coded by region. These regional codes must match the played discs. If  
the codes don't match, the disc cannot be played. This player's default code is region 4.  
Play  
Press the PLAY button to start playback.  
Stop  
During playback, press the STOP button once to stop playback and press the  
PLAY button to  
resume normal playback. Press this button twice repeatedly to stop playback completely.  
Previous and Next  
Press the  
Previous button to go to the next chapter. Press the  
Next button once to return to  
the beginning of the current chapter or track; press it twice to go to the previous chapter.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Playback  
Fast Playback  
During playback, press the  
or  
button to activate fast backward or forward playback. During fast  
playback, press the PLAY button to resume normal playback.  
SLOW  
During DVD disc playback, press the SLOW button to activate slow playback. During slow playback, press  
the PLAY button to resume normal playback.  
Repeat  
Use the REPEAT button repeatedly to repeat a chapter, title or all.  
Some discs do not support the repeat function.  
Menu  
Normally there is a selecting menu for DVD discs. You can press the MENU button (under DVD  
mode) to enter the menu, and use the direction buttons to highlight an item. Then press the ENTER  
button to confirm.  
Language (Audio)  
There can be up to 8 audio languages on a DVD disc. When you play a multi-language DVD disc  
you can use press the AUDIO button on the remote control to select a language.  
Subtitle  
The DVD player can support multiple kinds of subtitles. When you play a multi-subtitle disc you can  
press the SUBTITLE button on the remote control to select different subtitles.  
GOTO  
During DVD disc playback, press the GOTO button on the remote control once, there will be a  
menu displayed on the screen. You can set or select items for your preference. Use the  
direction buttons to select items and press the ENTER button to enter and use the  
direction  
buttons to select the desired item. Press the direction button to return. When select the  
Title/Chapter, TT Time/CH Time, use number buttons to input desired title/chapter number time.  
Some DVD discs do not support the search function.  
Various Camera Angles  
The movies on some DVDs have been recorded from various camera positions. This lets you enjoy  
the same scene from different perspectives. In this case you'll usually find a marking on the DVD  
sleeve.  
When playing a DVD containing various camera angles the camera symbol appears on the screen.  
Press the ANGLE button repeatedly until the desired perspective is shown. The picture will be  
adjusted in 1~2 seconds.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Playback  
CD Playback  
After loading a CD disc, the unit will play all tracks on the disc by default. You can use the  
button, or number buttons to select a track.  
Stop  
Press the STOP button once to stop playback and press the PLAY button to resume normal  
playback. Press this button twice repeatedly to stop playback completely.  
Pause  
Press the PAUSE button to pause the playback and then press the PAUSE button again or  
button to resume normal playback.  
PLAY  
Previous and Next  
Press the  
track.  
button once to go the beginning of this track. Press twice repeatedly to go the previous  
Press the  
button to play from the beginning of the next track.  
Fast Playback  
During playback, press the  
button to activate fast forward playback; press the  
button to  
activate fast backward playback. During fast playback, press the Play button to resume normal  
playback.  
GOTO  
Press the GOTO button to select desired playback time or track. Press the button repeatedly to  
select Disc Go To, Track Go To or Select Track. Use the 0-9 buttons to enter the desired playback  
time or track and press the ENTER button to play.  
Repeat  
Use the REPEAT button repeatedly to repeat Track, All or to cancel repeat.  
Some discs do not support the repeat function.  
Audio  
During CD playback, press the AUDIO button on the remote control to select the audio output mode:  
Mono Left, Mono Right, Mix-Mono and Stereo.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Playback  
JPEG Playback  
JPEG is a common picture format that requires small amounts of storage per image and has low  
loss in resolution. Hundreds of pictures can be stored on a disc in this format. In order to view JPEG  
photo albums, you can ask your film development company to make a "PICTURE CD" when they  
develop your film.  
Play  
After loading a JPEG disc, a root menu displayed on the screen. Use the ENTER button and the  
direction button to select a submenu, and then use the  
Many discs have other contents besides pictures.  
Stop  
button to select the contents.  
Press the STOP button to preview the pictures behind currently playng pictures in the way of small  
pictures. Press the  
PLAY button to resume normal playback.  
Pause  
During playback, press the PAUSE button to pause playback, and press the PAUSE button again or  
PLAY button to resume playback.  
Repeat  
During playback, press the REPEAT button repeatedly, and the repeat modes are Shuffle, Random,  
Single, Repeat One, Repeat All and Repeat Off.  
Previous and Next  
During playback, press the  
or  
button to select picture.  
Menu  
Press the MENU button once to stop playback and return to the root menu.  
GOTO  
During playback, press the GOTO button to select the desired picture. Use the number buttons to input  
the file number and press ENTER button to play the picture.  
Picture Rotation  
This can be used only when the picture is normally displayed. Once another picture is selected,  
rotation will be cancelled automatically. Use the  
buttons to rotate the picture.  
Some JPEG disc may not support rotating  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Playback  
DIVX Playback  
Pre-operation  
DIVX is the name of a revolutionary new video code, which is based on the new DIVX compression  
standard for video.  
Load a DIVX disc in the disc tray, the player will search and play disc automatically.  
The screen displays the root menu. Use the  
ENTER button to play.  
,
buttons to select desired item and press the  
Stop  
During playback, press the STOP button to stop playback and return to root menu and press the  
PLAY button to play the file from the beginning.  
Pause  
During playback, press the PAUSE button once to pause the playback and press the PLAY  
button to resume normal playback.  
Previous  
and Next  
Press the  
button to go the previous file; press the  
button to play the next file  
Fast Playback  
During playback, press the  
fast playback, press the  
or  
button to activate fast backward or forward playback. During  
PLAY button to resume normal playback.  
SLOW button  
During playback, press the SLOW button to activate slow playback. During slow playback, press  
the PLAY to resume normal playback.  
GOTO button  
Press the GOTO button to select desired file or playback time. During playback, press it repeatedly  
to display as follows: Select:_ _ _ ; Go To _:__:__' Press the number buttons to enter the desired  
file or playback time and press the ENTER button to confirm.  
Repeat  
During playback, press the REPEAT button repeatedly to select repeat mode.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USB and SD/MS/MMC Card Function  
Preparation  
In DVD mode, connect USB device to the USB port or insert SD/MS/MMC card into the  
SD/MS/MMC card slot on the right side of the unit  
Note  
Make sure that files are stored in the USB and the SD/MS/MMC card before the connection.  
File Playback  
Press the Card button to shift to desired mode and the screen will display the menu, as shown  
1.  
below:  
00:00  
00:00  
001/002  
BAK  
JPEG  
2. Press the  
3. Press the  
button to select the folder, and press Enter button to enter.  
buttons to select file and press Play button to play.  
4. During playback, press the Stop button to stop playback; press the button to return to the  
folder menu.  
Note:  
Screen display varies from disc to disc.  
After disconnection USB or SD/MS/MMC card from the unit, the unit will to disc  
playback mode.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD System Setup  
Preparations  
1. In DVD mode, press the Setup button to open DVD setup menu.  
2. Press the  
button to select setup menu.  
3. Press the Setup button again to exit DVD setup.  
General Setup Page  
Press the DVD SETUP button to enter the General setup menu. The screen will display as the  
below:  
- - General Setup Page - -  
In the menu, Use the  
select the desired Item. Press the ENTER button to  
enter the item. Press the button to return.  
direction buttons to  
TV Display  
Angle Mark  
OSD Lang  
Captions  
Screen Saver  
Last Memory  
Media Center  
Go To General Setup Page  
TV Display  
- - General Setup Page - -  
1. Press the  
direction buttons to select TV  
TV Display  
Angle Mark  
OSD Lang  
PS  
On  
Eng  
Off  
On  
On  
Normal/PS  
Normal/LB  
Wide  
Display.  
2. Press the ENTER button to enter the setup.  
3. Use the direction buttons to select items.  
Captions  
Screen Saver  
Last Memory  
Media Center  
4. Press the ENTER button again to confirm  
selection and return.  
Set TV Display Mode  
Angle Mark  
- - General Setup Page - -  
1. Press the  
Angle Mark.  
2. Press the ENTER button to enter the setup.  
direction buttons to select  
TV Display  
Angle Mark  
OSD Lang  
PS  
On  
Eng  
Off  
On  
On  
On  
Off  
Captions  
Screen Saver  
Last Memory  
Media Center  
3. Use the  
Off.  
direction buttons to select On or  
4. Press the ENTER button again to confirm  
selection and return.  
Set Angle Mark  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD System Setup  
OSD Lang  
The item is used to select the OSD language.  
- - General Setup Page - -  
TV Display  
Angle Mark  
OSD Lang  
PS  
On  
Eng  
Off  
On  
On  
1. Press the  
direction buttons to select OSD  
Lang.  
English  
French  
Captions  
2. Press the ENTER button to enter the setup.  
3. Use the direction buttons to select items.  
Screen Saver  
Last Memory  
Media Center  
Spanish  
German  
Italian  
4. Press the ENTER button again to confirm  
selection and return.  
Portuguese  
Dutch  
Set OSD Language  
Captions  
- - General Setup Page - -  
1. Press the  
direction buttons to select  
Captions.  
TV Display  
Angle Mark  
OSD Lang  
PS  
On  
Eng  
Off  
On  
On  
2. Press the ENTER button to enter the setup.  
3. Use the direction buttons to select items.  
Captions  
On  
Off  
Screen Saver  
Last Memory  
Media Center  
4. Press the ENTER button again to confirm  
selection and return.  
Set Closed Captions  
Screen Saver  
- - General Setup Page - -  
1. Press the  
Screen Saver.  
2. Press the ENTER button to enter the setup.  
direction buttons to select  
TV Display  
Angle Mark  
OSD Lang  
PS  
On  
Eng  
Off  
On  
On  
Captions  
3. Use the  
Off.  
direction buttons to select On or  
Screen Saver  
Last Memory  
Media Center  
On  
Off  
4. Press the ENTER button again to confirm  
selection and to return.  
Set Screen Saver  
Last Memory  
- - General Setup Page - -  
1. Press the  
direction buttons to select Last  
TV Display  
Angle Mark  
OSD Lang  
PS  
On  
Eng  
Off  
On  
On  
Memory.  
2. Press the ENTER button to enter the setup.  
Captions  
3. Use the  
Off.  
direction buttons to select On or  
Screen Saver  
Last Memory  
Media Center  
On  
Off  
4. Press the ENTER button again to confirm  
selection and return.  
Set Last Memory State  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD System Setup  
Media Center  
- - General Setup Page - -  
1. Press the  
Media Center.  
2. Press the ENTER button to enter the setup.  
3. Use the direction buttons to select DVD,  
USB, SD/MMC or MS.  
direction buttons to select  
TV Display  
Angle Mark  
OSD Lang  
PS  
On  
Eng  
Off  
On  
On  
Captions  
Screen Saver  
Last Memory  
Media Center  
DVD  
USB  
4. Press the ENTER button again to confirm  
selection and return.  
SD/MMC  
MS  
Please Select a media  
Audio Setup Page  
Press the SETUP button to enter the General setup menu, then use the  
select Audio Setup Page, the screen will display as the below:  
direction buttons to  
direction buttons to  
- - Audio Setup Page - -  
In the menu, Use the  
Dolby Digital Setup  
HDCD  
select the desired item. Press the ENTER button to  
enter the item. Press the button to return.  
Go To Audio Setup Page  
Dolby Digital Setup  
1. Press the  
Dolby Digital.  
direction buttons to select  
- - Dolby Digital Setup - -  
Dual Mono  
Dynamic  
Stereo  
L-Mono  
R-Mono  
Mix-Mono  
2. Press the ENTER button to enter the setup, the  
screen will display as left:  
3. In the menu, use the  
select items.  
direction buttons to  
4. Press the ENTER button to enter the setup.  
Press the button to return.  
Dual Mono (1+1) Setup  
Dual Mono  
- - Dolby Digital Setup - -  
1. Press the  
direction buttons to select Dual  
Dual Mono  
Dynamic  
Stereo  
Mono.  
L-Mono  
R-Mono  
Mix-Mono  
2. Press the ENTER button to enter the setup.  
3. Use the direction buttons to select items.  
4. Press the ENTER button again to confirm  
selection and return.  
Dual Mono (1+1) Setup  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD System Setup  
Dynamic  
1. Press the  
direction buttons to select  
- - Dolby Digital Setup - -  
Dynamic.  
FULL  
3/4  
Dual Mono  
Dynamic  
Str  
2. Press the ENTER button to enter the setup, the  
screen will display as left:  
3. Press the OK button to enter.  
1/2  
4. Use the  
direction buttons to adjust.  
1/4  
5. Press the ENTER button again to confirm  
setting and return.  
OFF  
Set Drc Off  
6. Press the  
button to return.  
HDCD Setup  
In the Audio Setup Page, use the  
direction buttons to select HDCD Setup. Press the ENTER  
button to enter the setup and the screen will display as below:  
- - Hdcd Setup Page - -  
1. In the menu, press the ENTER button to enter  
the setup.  
Filter  
1x  
Off  
1x  
2x  
2. Use the  
direction buttons to select items.  
3. Press the ENTER button again to confirm  
selection and return.  
4. Press the button to return.  
Filter  
Video Setup  
Press the SETUP button to enter the General setup menu, then use the  
direction buttons to  
direction buttons to  
select Video Setup Page, the screen will display as the below:  
- - Video Setup Page - -  
In the menu, Use the  
Quality  
select the desired item. Press the ENTER button to  
enter the item. Press the button to return.  
Go To Video Setup Page  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD System Setup  
Video Quality Setup  
Select Quality, press the ENTER button to enter the menu as below:  
- - Video Quality Setup - -  
1. In the menu, Use the  
direction buttons to  
Sharpness  
Brightness  
Contrast  
Med  
00  
High  
select the desired item.  
Medium  
Low  
00  
2. Press the ENTER button to enter the item.  
3. Press the button to return.  
Sharpness  
Sharpness  
- - Video Quality Setup - -  
1. Press the  
direction buttons to select  
Sharpness  
Brightness  
Contrast  
Low  
00  
High  
Sharpness.  
Medium  
Low  
00  
2. Press the ENTER button to enter the setup.  
3. Use the direction buttons to select High,  
Medium or Low.  
4. Press the ENTER button again to confirm  
selection and return.  
Sharpness  
Brightness  
1. Press the  
direction buttons to select  
Brightness.  
2. Press the ENTER button to enter the setup, the  
screen will display as left:  
3. Use the  
level.  
direction buttons to adjust the  
Brightness  
0
4. Press the ENTER button again to confirm  
setting and return.  
Brightness  
Contrast  
1. Press the  
direction buttons to select  
Contrast.  
2. Press the ENTER button to enter the setup, the  
screen will display as left:  
3. Use the  
level.  
direction buttons to adjust the  
Contrast  
0
4. Press the ENTER button again to confirm  
setting and return.  
Contrast  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD System Setup  
Preference Setup  
Note: This item is only available when there is no disc in the disc tray or the disc is stopped  
completely  
Press the DVD SETUP button to enter the General setup menu, then use the  
to select Preference Page, the screen will display as the below:  
direction buttons  
- - Preference Page - -  
Audio  
Eng  
Off  
In the menu, press the ENTER or  
select the desired item. Press the ENTER button to  
enter the item. Press the button to return.  
direction button to  
Subtitle  
Disc Menu  
Default  
Eng  
Preference Page  
Audio  
- - Preference Page - -  
1. Press the  
direction buttons to select  
Audio  
Eng  
English  
French  
Audio.  
Subtitle  
Disc Menu  
Default  
Off  
Eng  
Spanish  
Chinese  
Japanese  
Italian  
2. Press the ENTER button to enter the setup,  
see the left figure:  
3. Press the  
language.  
direction buttons to select audio  
Russian  
German  
4. Press the ENTER button again to confirm  
setting and return.  
Preference Audio Language  
Subtitle  
Press the  
direction buttons to select  
1.  
2.  
3.  
4.  
- - Preference Page - -  
Subtitle.  
Audio  
Eng  
Off  
French  
Spanish  
Chinese  
Japanese  
Italian  
Subtitle  
Disc Menu  
Default  
Press the ENTER button to enter the setup,  
see the left figure:  
Eng  
Press the  
direction buttons to select  
Russian  
German  
Off  
Subtitle language.  
Press the ENTER button again to confirm  
setting and return.  
Preference Subtitle Language  
Disc Menu  
- - Preference Page - -  
1. Press the  
direction buttons to select Disc  
Audio  
Eng  
Off  
English  
French  
Menu.  
Subtitle  
Disc Menu  
Default  
2. Press the ENTER button to enter the setup,  
see the left figure:  
Eng  
Spanish  
Chinese  
Japanese  
Italian  
3. Press the  
direction buttons to select  
Russian  
German  
Menu language.  
4. Press the ENTER button again to confirm  
setting and return.  
Preference Menu Language  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD System Setup  
Default  
- - Preference Page - -  
1. Press the  
direction buttons to select  
Audio  
Eng  
Off  
Subtitle  
Disc Menu  
Default  
Default.  
Eng  
2. Press the ENTER button to select Reset.  
3. Press the ENTER button, all the settings will  
return to the default status.  
Reset  
Load Factory Setting  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Take steps described in the tables below to solve simple problems before contacting customer  
service.  
If you suspect something wrong with this unit, immediately turn the power off and disconnect the  
power connector from the unit. Never try to repair the unit yourself because it is dangerous to do  
so.  
CHECK ITEM  
SYMPTOM  
There is no display on the  
screen.  
Make sure the unit is turned on and all connections  
correct.  
Make sure the unit is turned on and all connections are  
correct.  
Make sure the volume is not turned down or muted.  
Make sure the sound setup is correct.  
In DVD mode, make sure disc is not dirty or warped.  
There is no sound.  
There is no picture or picture  
moves up and down.  
Make sure all connections are correct.  
Make sure the unit is in correct video mode.  
Make sure disc is loaded in correctly.  
Make sure disc is not dirty or warped.  
Make sure the region code is the same as region code of DVD  
disc.  
The unit can't play discs.  
Make sure water condensation has not occurred. If it occurs,  
take out the disc and leave the unit on for at least one hour.  
The unit does not continue to  
play discs or plays the same  
section repeatedly.  
Make sure disc is not dirty or damaged.  
Make sure the unit is not .any repeat status.  
Make sure there are no obstructions between remote control  
and the unit.  
Make sure the remote control is pointing at the unit.  
Make sure the battery is installed into the remote control  
correctly.  
The remote control does not  
work.  
Make sure battery is not too weak.  
Other Notes:  
Static or other external interference may cause the unit to behave abnormally. In this occurrence,  
unplug the power-supply cord from the outlet and plug it in again to reset the unit. If the problem  
persists, then please disconnect the power and consult a qualified technician.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Resolution  
800 x 600  
20 inches  
TFT-LCD Screen Size  
Power  
Power Consumption  
Dimension  
AC100~240V, 50/60Hz  
<60W  
490mm x 478mm x 184mm (LxWxD)  
About 9.52 Kg  
Weight  
DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE  
Manufactured under license from Dolby Laboratories.  
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.  
Confidential unpublished works. © 1992 -1997 Dolby Laboratories, Inc.  
All rights reserved.  
If at any time in the future you should need to dispose of this product please note  
that: Waste electrical products should not be disposed of with household waste.  
Please recycle where facilities exit. Check with your Local Authority or retailer for  
recycling advice. (Waste Electrical and Electronic Equipment Directive)  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PALSONIC CORPORATION PTY LTD  
1 JOYNTON AVENUE  
WATERLOO NSW 2017 AUSTRALIA  
TEL: (02) 9313 7111  
FAX: (02) 9313 7555  
PALSONIC CUSTOMER SERVICE  
TELEPHONE  
AUSTRALIA: 1300 657 888  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Milwaukee Sander 6018 User Manual
Network Technologies TV Converter Box VGA DVI User Manual
Night Owl Optics Home Security System CAM 4PK DM724 User Manual
Nikon Cell Phone Accessories WU 1b User Manual
Olympus Camera Lens DIGITAL EC 20 User Manual
Oricom Cordless Telephone eco50 User Manual
Oster Toaster TSSTTRDFL1 User Manual
Panasonic Printer DP 4510 User Manual
Partner Tech Trimmer PWT420 User Manual
Patton electronic Network Card 1053 User Manual