bringing people together
Oricom M5500 Series
Cordless phone with integrated corded
phone and Answering system
USER GUIDE
Keep this user guide for
future reference.
WARNING
!
DO NOT USE STANDARD/ALKALINE BATTERIES IN THIS PRODUCT, AS
THERE IS A RISK OF EXPLOSION AND/OR INJURY.
USE ONLY Ni-MH RECHARGEABLE BATTERIESAS SPECIFICED IN THIS
USER GUIDE. CONTACT ORICOM FOR REPLACEMENT BATTERIES.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
CONTENTS
WARNINGS AND SAFETY INFORMATION ………………………………… 4
Getting Started ………………………………………………………………… 5
Pack contents …………………………… 5
Purchasing additional handsets……… 5
Installation and Charger ……………… 6
Your cordless handset ………………… 7
Understanding the cordless handset
display ………………………………… 8
Your M5500 base unit…………………… 9
Understanding the base unit display 10
Basic Operation ………………………………………………………………… 11
Recall function when connected to a
PABX ……………………………… 13
Pause feature when using on a PABX 14
Group listening (with base unit) …… 14
Switching between Handset / Speaker
mode (with base unit) …………… 14
Handsfree mode (with cordless
During standby ……………………… 11
Cordless handset's LCD display…… 11
Base unit’s LCD display …………… 11
Answering an incoming call………… 11
With cordless handset ……………… 11
With base unit ……………………… 11
Making an external call ……………… 12
With cordless handset ……………… 12
With base unit ……………………… 12
Mute feature …………………………… 12
With cordless handset ……………… 12
With base unit ……………………… 12
Recall feature ………………………… 13
Call waiting…………………………… 13
Take two different calls at the same
handset)……………………………… 15
Volume adjustment (with base unit) 15
Speaker volume control …………… 15
Handset volume control …………… 15
Ringer volume control ……………… 15
Direct Memories ……………………… 16
How to enter names ………………… 16
Store new records…………………… 16
Edit / Dial / Delete stored records … 17
Key lock………………………………… 17
time ………………………………… 13
Caller ID Operation …………………………………………………………… 18
With cordless handset ……………… 18
Review Caller ID records …………… 18
1
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
With base unit ……………………… 18
Delete one or all CID record(s) …… 20
With cordless handset ……………… 20
With base unit ……………………… 20
Withheld Call ………………………… 21
Message Waiting ……………………… 21
Dial a CID number …………………… 19
Store a CID number ………………… 19
With cordless handset ……………… 19
With base unit ……………………… 19
LNR Function (Last Number Redial)………………………………………… 22
With cordless handset ……………… 23
Delete last number dialled ………… 23
With cordless handset ……………… 23
Redial the last number ……………… 22
With cordless handset ……………… 22
With base unit ……………………… 22
Store the last number dialled ……… 23
Phonebook ……………………………………………………………………… 24
With base unit ……………………… 26
Delete one record …………………… 27
With cordless handset ……………… 27
With base unit ……………………… 27
Delete all records ( with base unit ) 27
Add new records……………………… 24
With cordless handset ……………… 24
With base unit ……………………… 24
Review / Edit / Dial stored Phonebook
records ……………………………… 25
With cordless handset ……………… 25
Menu Setup ……………………………………………………………………… 28
Key lock………………………………… 28
Audio settings ………………………… 28
Ringer melody setting ……………… 29
Ringer loudness setting …………… 29
Key tone setting……………………… 29
Answering system (TAD) settings … 29
Answering mode setting …………… 30
TAD rings setting …………………… 30
TAD PIN setting……………………… 30
Call screen mode setting…………… 30
PABX settings ………………………… 31
Key lock's PIN ……………………… 31
Prefix number setting ……………… 31
Prefix setting ………………………… 31
General settings ……………………… 32
Contrast setting ……………………… 32
Language setting …………………… 32
Date / Time setting ………………… 32
Reset ………………………………… 32
2
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Cordless Handset Operation ………………………………………………… 33
Conference calls …………………… 35
Cordless handset keypad lock …… 36
Registration …………………………… 36
Register new handsets on the M5500
Handset ringer adjustment ………… 33
Handset ringer melody……………… 33
Handset ringer volume……………… 33
Handset ringer On / Off …………… 33
Multi-handset Operation …………… 34
Intercom function …………………… 34
Call transfer between cordless
base ………………………………… 36
Remove handsets…………………… 37
Language setting …………………… 37
Handset name ………………………… 38
Reset …………………………………… 38
handsets …………………………… 35
Transfer a speakerphone call from the
base unit to the cordless handset 35
Answering Machine Operation ……………………………………………… 39
Play ICM……………………………… 41
Memo …………………………………… 42
Record memo ……………………… 42
Play memo …………………………… 42
Delete messages……………………… 42
Delete one message………………… 42
Delete all messages ………………… 43
Memory full …………………………… 43
Answering machine On / Off ……… 39
OGM (Outgoing Messages) ………… 39
OGM setting ………………………… 39
Record OGM ………………………… 40
Play OGM …………………………… 40
Delete OGM ………………………… 40
OGM play to line …………………… 40
ICM (Incoming Messages) ………… 41
Record ICM ………………………… 41
Advanced Answering System………………………………………………… 44
Remote control ……………………… 44
Access the answering machine
Call screening ………………………… 45
Toll saver ……………………………… 45
Remote turn-on ……………………… 45
Cordless handset detection………… 45
remotely …………………………… 44
Remote operation keys …………… 44
Appendix ………………………………………………………………………… 46
Troubleshooting ……………………… 46
Product Specifications ……………… 47
Notes for Operation in NEW ZEALAND 48
REN (RN for New Zealand) ………… 48
Caller ID ………………………………… 48
Warranty Information ………………… 49
3
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNINGS AND SAFETY INFORMATION
WARNINGS AND SAFETY INFORMATION
Avoid exposure of this telephone to moisture
or liquid.
To prevent electric shock, do not open the
handset or base cabinet.
Avoid metallic contact (e.g. metal clips, keys)
between the battery contacts and charging
conductors.
interference in the form of a humming noise.
Your phone can interfere with electrical
equipment such as answering machines, TV
and radio sets, clock radios and computers if
placed too close. It is recommended that you
position the base unit at least one metre from
such appliances.
There is a slight chance that the telephone
could be damaged by an electrical storm. It is
recommended that users unplug the phone
from the mains supply and telephone socket
during a storm.
Do not use the handset in an explosive hazard
area such as where there is gas leaking.
Follow the local regulations regarding the
disposal of your packing materials, exhausted
batteriesandusedphone. Whereverpossible,
recycle those materials.
We advise that this phone should not be used
near intensive care medical equipment or by
persons with pacemakers.
Clean with a dry, soft, lint-free cloth. Never
use cleaning agents, particularly aggressive
solvents.
This telephone complies with applicable
safety requirements for exposure to radio
waves (EMR). The mean power of this
telephone does not exceed 20mW limit at
which point testing is required.
The earpiece of the handset may attract small
metal objects such as staples and pins. Care
should be taken when placing the handset
near these items.
This telephone is not designed for making
emergency telephone calls when the mains
power fails.
Always have a corded phone available to be
able to make and receive calls to emergency
services if the mains power fails.
Do not use your telephone during an electrical
storm thunderstorm as it is possible to get an
electric shock.
Refer to information contained in White pages
directory.
Because the phone works by sending radio
signals between base station and handset,
wearers of hearing aids may experience
CAUTION
Use only the mains adaptors supplied with this Adaptor for base:
product. Incorrect adaptor polarity or voltage Input: 240 VAC 50 Hz Output: 9 VDC 500 mA
can seriously damage the unit.
Adaptor for Charger:
Input: 240 VAC 50 Hz Output: 7.5 VDC 100 mA
4
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
Getting Started
Pack contents
Depending on the model you have purchased this pack should contain the following
items:
M5500+1 M5500+2 M5500+3 M5500+4
Base units
1
1
1
2
1
1
1
2
2
3
1
1
1
3
3
4
1
1
1
4
4
5
1
1
Cordless handsets
Charger adaptors
Power adaptors
Line cord and modular adaptor plug
User guide and Warranty card
Handset Rechargeable AAA
Ni-MH Batteries (1.2V 600mAh)
2
4
6
8
If any of these are missing, please contact Oricom directly.
Purchasing additional handsets
You may expand your M5500 by adding more handsets (M5520TI). These can be
purchased separately from the retailer where you purchased the product, or directly
from Oricom (Australia). The M5500 can accommodate a total of 4 cordless handsets.
WARNING
DO NOT USE STANDARD/ALKALINE BATTERIES IN THIS PRODUCT, AS THERE IS
A RISK OF EXPLOSION AND/OR INJURY.
USE ONLY Ni-MH RECHARGEABLE BATTERIES AS SPECIFICED IN THIS USER
GUIDE. CONTACT ORICOM FOR REPLACEMENT RECHARGEABLE BATTERIES.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
Installation and Charger
1. Connect the mains adaptor to the socket on the back of the base unit and to the
wall mains supply.
AC110~240V
2. Connect the telephone cord to the phone socket on the back of the base unit and
to the wall phone socket.
3. Insert 2 rechargeable Ni-MH AAA batteries
(included), observing the correct polarity, into the
battery compartment on the handset. Slide the
battery door firmly into place.
4. Place the handset on the charging cradle and
charge the batteries for a full 15 hours before
using it for the first time.
Note: It may take some time for the cordless handset to power up, and it may get
warm during initial charge. This is normal.
Tip!
It is good practice to put the cordless handset on the charging cradle when it is not in
use to ensure that the handset is always fully charged.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
Your cordless handset
1
2
3
4
5
6
7
8
11
12
9
10
1. Talk
8. Numeric keys
9. / Ringer Off (On)
2. Left / Recall
3. Menu
10. Ringer Melody / Ringer Volume /
Receiver Volume
4. Phonebook
5. Right / CID (Caller ID) / Handsfree
6. Intercom
11. # / Keypad lock
12. LNR (Last Number Redial) /
Pause / Long (Short) flash
7. Delete / Mute
7
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
Understanding the cordless handset display
Left Arrow / Phonebook records
are being reviewed
Connected to telephone line.
Flashes when there is an incoming call
X appears: microphone muted
Battery level
(3 bars fully charged)
Caller display
Ringer is turned off
Speakerphone on
Keypad lock
Antenna in range / out of range
Intercom call to another handset
Right Arrow / Message waiting
8
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
Your M5500 base unit
1
2
7
8
9
3
4
5
10
11
12
13
14
6
15
16
1. OK / Menu
10. Stop / On/Off / ESC
Stop action; Activating / Deactivating
the answering machine; Exit the current
operation mode
2. Down / OGM (ANS)
Recording / Play OGM, Repeat Message,
Press twice for Skip to previous Message
11. Play / Pause / Mute
3. CID (Caller ID)
4. Phonebook
Play MEMO / ICM Message; Pause
playback; Mute microphone
5. Delete
12. Page
6. Numeric keys & , # keys
Base page handset and call transfer
7. Up / MEMO
13. Recall
Recording MEMO, Skip to next Message
14. Last Number Redial (LNR) / Pause
15. Speaker volume control
16. Speakerphone key
8. Direct memory keys
9. Dial
9
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
Understanding the base unit display
Ringer off
In Phonebook Mode
Message waiting
Repeat CLIP
Speakerphone On
Flash: Group listening
Handset Talking
Play ICM Message
Indicates phone call in progress
Flashes when new messages are
received
Microphone Mute
Review CID (caller ID)
Hour/Minute
Flashes when there are new CIDs
Flash: Date/Time Setting
Message Counter
Date/Month
Flash: Date/Time Setting
10
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
Basic Operation
During standby
Note: If the power is not connected to the base unit.
The cordless handset CANNOT operate. However, you can still
make and receive a call using the corded handset.
Cordless handset's LCD display
HANDSET 1 : Handset number
: Current battery level
HANDSET
: Signal icon indicates the
cordless handset is linked to the base unit.
Base unit’s LCD display
CLIP 10-30
A1
: Total 30 calls with 10 new calls
: OGM 1
Message15/35 : Total 35 messages with 15 new
messages.
Answering an incoming call
With cordless handset
When there is an incoming call, the phone rings and flashes on the display. If a CID
record is received,
flashes and the caller information is displayed.
1. Press
key to answer the call.
2. Press
key again to end the call.
With base unit
When there is an incoming call,
1. Press
key or pick up the handset to answer the call.
key again or hang up the handset to end the call.
2. Press
Note: Call timer shows the duration of your current call on the display.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
Making an external call
With cordless handset
Normal dialling
1. Press
key.
2. Enter a telephone number. If you enter more than 14 digits, you only see the last
14 digits on the display.
3. Press
key to end the call.
Pre-dialling
1. Enter a telephone number.
2. When necessary, press
to erase the digit individually.
3. Press
key to dial.
4. Press
key to end the call.
With base unit
1. Press
key or pick up the handset.
2. Enter a telephone number. If you enter more than 13 digits, you only see the last
13 digits on the display.
3. Press
key again or hang up the handset to end the call.
Mute feature
Place a call on hold so that caller will NOT be able to hear you but you can still hear
the caller.
With cordless handset
During talking mode,
1. Press
key to mute the call,
is shown on the display.
2. Press
key again to resume the call.
With base unit
During talking mode,
1. Press
key to mute the call,
is shown on the display.
2. Press
key again to resume the call.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
Recall feature
Recall feature can be used when you are using some services provided by your
network operators such as “call waiting”, etc. A subscription may apply for these
services, contact your network operators for more information.
While you are talking on the phone, press R key on the base unit or ꢀ /R key on
the cordless handset to send a Recall (flash signal).
Call waiting
You can use the recall function to answer a second call while you are on the phone.
However this service need to be turned on. For example, to turn on Telstra’s Call Waiting
service:
1. Press
then press
on the base unit or
4 3 # .
on the cordless handset to wait for dial tone
2. You will hear a service tone then press
or mentioned above.
Take two different calls at the same time
During a call, you will hear two loud beeps periodically to notify you of another incoming
call. If you wish to answer this call,
1. Press R key. You will hear a dial tone.
2. Press 2 to put the current call on hold and talk with the second caller.
3. Repeat steps 1-2 to swap between the two callers.
Recall settings are: Australia (100ms, SHORT); New Zealand (600ms, LONG).
If this feature does not work correctly, check the country option. To change the Recall
settings, press and hold
/P key on the cordless handset to switch between “LONG”
and “SHORT” on the display.
Recall function when connected to a PABX
If you have connected your telephone to a PABX, you can use all the facilities such as
call transfer, automatic recall, etc. The R key provides access to these facilities.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
Pause feature when using on a PABX
Note: The pause function described in this section is only necessary when the M5500
is used on older PABX’s.
With some PABX's, there is a short pause between the code for the outside line (usually
0 or 9) and obtaining dial tone. A pause needs to be entered during manually and stored
in the phone book so that the numbers are not dialled too quickly.
When storing numbers in memory, you can include the outside line access digit (e.g. ‘9’
or ‘0’) with each phone number. LNR function or memory dial may not work when using
your telephone on a PABX. Insert a pause between the OUTSIDE LINE DIGIT & the
TELEPHONE NUMBER.
1. Press the numeric keys to enter the OUTSIDE LINE DIGIT.
2. Press
/P key to insert a pause.
3. Press the numeric keys to enter the TELEPHONE NUMBER.
Group listening (with base unit)
During handset talking mode, if you want other people near this unit to hear what you
and the caller are talking,
1. Press
the display.
key once, the unit changes to group listening mode. The
flashes on
2. Press
key again to cancel this feature.
Switching between Handset / Speaker mode (with base unit)
During speakerphone talking mode, the unit will switch to handset mode after the user
pick up the handset.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
Handsfree mode (with cordless handset)
During talking mode,
1. Press
\
\
key to switch to speakerphone mode.
key again to cancel this feature.
2. Press
Or
During standby mode,
1. Press and hold
\
key to switch to speakerphone mode.
2. Press
\
key again to cancel this feature.
Volume adjustment (with base unit)
Speaker volume control
During speakerphone mode,
1. Press
or
key to adjust the Speaker volume level: Step 1(lowest) to
Step 5 (hightest).
2. The unit automatically returns to the previous talking mode 2 seconds after pressing
the last key.
Handset volume control
During handset talking mode,
1. Press
or
key to adjust the handset volume level: Step 1 (lowest) to
Step 3 (highest).
2. The unit automatically returns to the previous talking mode 2 seconds after pressing
the last key.
Ringer volume control
During incoming call,
1. Press
or
to adjust the ringer volume level: 4 steps and “off”.
2. The unit automatically returns to the previous mode 2 seconds after pressing the
last key.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
Direct Memories
There are 3 Direct memory keys on the base unit: M1, M2, and M3, which allow you to
store 3 numbers and dial them directly.
Each memory can store up to 24 digits per number and up to 16 characters per name.
How to enter names
The keypad is used to enter names. Select the characters by repeatedly pressing the
appropriate button, upper case letters as well as numbers and special characters can
be entered.
KEY
1
1x
Space
2x
1
3x
4x
5x
2ABC
3DEF
4GHI
5JKL
6MNO
7PQRS
8TUV
9WXYZ
0
A
D
G
J
M
P
T
B
E
H
K
N
Q
U
X
C
F
I
2
3
4
5
6
S
8
Z
L
O
R
V
Y
7
9
Q
0
*
#
Store new records
During standby mode,
1. Press M1 / M2 / M3 key.
2. The display on the right is shown.
3. Press OK key to confirm.
4. Enter the telephone number and the Name using the numeric keys.
5. Press
key to cancel the action and return to standby mode.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
Edit / Dial / Delete stored records
1. Press M1 / M2 / M3 key.
2. The display on the right is shown.
3. Press OK key to edit the memory. For
operation (Refer to P26).
4. Press
key to dial out the number.
During On-hook, the unit will turn Speakerphone on automatically, and dial the
number after 3 seconds.
During Off-hook, the unit will dial the number immediately.
5. Press X key to delete the memory record. For operation (Refer to P27).
Key lock
You can lock the keypad on the base in Menu
setting (Refer to “key lock” section on P28).
When the keypad is locked, you must enter the 4
digits PIN code correctly before dialling. The display
on the right is shown.
However, the emergency call or the call number less then 4 digits can be dialled
without entering the PIN code.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID OPERATION
Caller ID Operation
If you subscribe to your telephone operators service (charges may apply), numbers
of the incoming calls will be displayed on the screen and stored in the call log (please
consult your telephone service provider for details).
The M5500 series can store the last 30 calls including: the record number, date/time,
and phone number (up to 20 digits for the cordless handset and up to 24 digits for the
answering machine).
When an external call comes in, the display is shown below:
Note: If there is an identical phone number stored in the
phonebook, the number’s corresponding phonebook
name is displayed.
When you have new/unanswered calls, CLIP icon flashes on the base and
flashes on the
cordless handset. If a call has been answered, then the call is set to old call.
Review Caller ID records
With cordless handset
During standby mode,
1. Press
2. Press
3. Press
\
key to display the latest call name.
key to view the call number.
key again to see the Date/Time when the call was received.
With base unit
During standby mode,
1. Press
key to show the Call list.
2. Press ! or key to view other records.
If the call has recorded messages, the
flashes on the display.
icon
3. Press
key to play the message.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID OPERATION
Dial a CID number
While you are viewing the CID record that you wish to call,
1. Press
key.
2. During On-hook, the unit turns the Speakerphone on automatically, and dials the
number after 3 seconds. During Off-hook, it dials immediately.
Store a CID number
You can save a CID record into the Phonebook/Direct memory provided that it
contains a valid phone number and the Phonebook/Direct memory is not full.
With cordless handset
While you are viewing the CID record that you wish to save,
1. Press
key. The display on the right is
NAME ?
shown.
2. Press the numeric keys to edit the Name.
3. Press key to complete editing the Name and proceed to edit the Number.
4. Press the numeric keys to edit the Phone number.
5. Press key to confirm.
The record is now saved into the phonebook. Then it goes back to the call log.
With base unit
While you are viewing the CID record that you wish to save,
1. Press OK key. The display on the right is
shown.
2. Press ! or key to select saving to
Phonebook or Direct memory.
3. Press OK key to confirm the selection.
4. Press the numeric keys to edit the Name and the Number when necessary.
5. Press OK key, the record is stored in the Phonebook or Direct memory.
6. After 5 seconds, the unit will return to the previous mode (Call ID review mode).
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID OPERATION
If the Phonebook is full or Direct Memory has been
occupied, The display on the right is shown.
After 5 seconds, it will return to the previous mode or press
previous mode.
key to return to the
Delete one or all CID record(s)
With cordless handset
Delete one CID record
While you are viewing the CID record that you wish to delete,
1. Press
key.
key to confirm. The display shows previous CID record.
2. Press
Delete all viewed CID records
While you are viewing any CID record,
1. Press and hold
key.
2. Press key to confirm. The display shows unviewed CID records.
Note: If there are no more CID records, a message “EMPTY” is displayed.
With base unit
Delete one CID record
While you are viewing the CID record that you wish to delete,
1. Press X key. A confirmation message is
displayed as shown on the right.
2. Press OK key to confirm and return to the
previous mode; or press
the action.
key to cancel
20
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID OPERATION
Delete all CID records
While you are viewing any CID record,
1. Press and hold X key.
2. Press OK key to confirm the action.
The display on the right is shown.
3. Press OK key to confirm and return to the
previous mode; or press
the action.
key to cancel
Withheld Call
If the caller has withheld his or her number or the
number is out of area, the display will show either
“Withheld” or “Unavailable”.
Message Waiting
If you have subscribed to the voicemail service from
your telephone company,
is displayed when you
have a new message in your mailbox.
If the is displayed,
1. Call your network service providers to obtain your messages.
2. After listening to all the new messages, will disappear.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
LNR FUNCTION
LNR Function (Last Number Redial)
Redial the last number
With cordless handset
Your cordless handset stores the last 3 external numbers dialled, up to 25 digits per number.
If the number exceeds 25 digits, the first 25 digits will be stored to memory.
During standby mode,
1. Press
/P key.
2. When necessary, press
/P key again until you have selected your desired
number.
3. Press
key to dial.
Or
1. Press
key.
2. Press
/P key to redial the last number.
With base unit
Your base unit stores the last 5 external numbers dialled, up to 32 digits per number.
If the number exceeds 32 digits, the first 32 digits will be stored to memory.
During standby mode,
1. Press
/P key.
2. When necessary, press
/P key again until you have selected your desired
number.
3. Press
key to dial.
Or
1. Press
/P key.
2. Press
key or pick up the handset.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
LNR FUNCTION
Store the last number dialled
With cordless handset
While you are viewing a previously dialled number that you wish to save,
1. Press
key. The display on the right is
NAME ?
shown.
2. Press the numeric keys to enter the Name. If you
made a mistake, press key to edit it.
3. Press key to complete editing the Name and proceed to edit the Number.
4. Press the numeric keys to edit the Phone number when necessary.
5. Press key to confirm.
The record is now saved into the phonebook. Then it goes back to standby mode.
Delete last number dialled
With cordless handset
While you are viewing a previously dialled number that you wish to delete,
1. Press
key. The display on the right is
DELETE ?
shown.
2. Press
key to confirm. The display will
show the previous LNR record.
Note: If there are no more LNR records, a message “EMPTY” is displayed.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
PHONEBOOK
Phonebook
Add new records
With cordless handset
You can store up to 50 phonebook records in each handset. Each record can contain
up to 25 digits per number and 16 characters per name.
During standby mode,
NAME ?
1. Press and hold
key. The display on the
right is shown.
2. Press the numeric keys to enter the Name. If you made a mistake, press
key to edit it. Press and hold key to delete the entire name.
3. Press key to complete editing the Name and proceed to edit the Number.
4. Press the numeric keys to edit the Number. Press
key for further editing
when necessary.
5. Press
key to confirm.
The record is now saved into the Phonebook. Then it goes back to standby mode.
Repeat step 1 to 5 to add another record.
With base unit
You can store up to 50 phonebook records into the base unit. Each record can contain
up to 24 digits per number and 16 characters per name.
During standby mode,
1. Press
key.
2. Press ! or key to select “New” from the
display.
3. Press OK key, and the first digit flashes on the
display.
4. Press the numeric keys to enter the new Number. You can press ! or key
to select the desired digit’s position and press X key to edit when necessary.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
PHONEBOOK
5. Press OK key to complete editing the Number and proceed to enter the Name.
The first character flashes on the display.
6. Press the numeric keys to enter the new Name. As mentioned in Step 4, you can
perform similar editing by pressing ! / or X key when necessary.
7. Press OK key to confirm the updated Name.
8. Press
key to return to the previous mode.
Note: If you do not perform step 8, the unit will return to the previous mode after
20 seconds.
Review / Edit / Dial stored Phonebook records
With cordless handset
During standby mode,
1. Press
key.
2. Press ꢀ or
to browse stored records.
3. Press
key to dial the number.
While you are viewing the record that you wish to edit,
1. Press and hold
key. The display on the
_
John
right is shown.
2. Press
key to erase the last character,
key to erase the entire characters.
or press and hold
3. Press
key to complete editing the Name and proceed to edit the Number.
4. Press
key to erase the last digit, or press and hold
key to erase the
entire digits.
5. Press
key to confirm. Then it goes back to standby mode.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
PHONEBOOK
With base unit
During standby mode,
1. Press
key. The display on the right is
shown.
2. Press OK key to view the first record.
Note: If the Number or the Name exceeds 13 digits, only the first 13 digits are
displayed on the first page. After 5 seconds, the remaining digits will be
displayed on the second page.
3. Press ! or key to view other records.
Note: You can search the record quickly by entering the first character of the
Name. For example, if you wish to view Mary’s record, press the “M” key.
Then the unit will search and display the records with the first character “M”.
4. Press
key to dial the number.
During On-hook, the unit will turn the Speakerphone on automatically, and dial
the number after 3 seconds.
During Off-hook, the number will be dialled immediately.
While you are viewing the record that you wish to edit,
1. Press OK key. The last digit flashes on the display.
2. Press X key and numeric keys to edit the Number, or press ! or key to
select the digit’s position.
3. Press OK key to confirm the updated number and proceed to edit the Name.
4. Press X key and numeric keys to edit the Name, or press ! or key to
select the character’s position.
5. Press OK key to confirm the updated Name.
6. Press
key to return to the Phonebook review mode.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
PHONEBOOK
Delete one record
With cordless handset
While you are viewing the record that you wish to delete,
1. Press
key. A confirmation message “DELETE?” is displayed.
key to confirm and show the previous record.
2. Press
With base unit
While you are viewing the record that you wish to delete,
1. Press X key. A confirmation message is
displayed as shown on the right.
2. Press OK key to confirm and return to the
previous mode; or press
action.
key to cancel the
Delete all records ( with base unit )
During standby mode,
1. Press
key.
2. Press ! or key to select “Delete ALL” from the display.
3. Press OK key. A confirmation message is
displayed as shown on the right.
4. Press OK key to confirm and return to the
previous mode; or press
action.
key to cancel the
27
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETUP
Menu Setup
During standby mode, on the base unit.
1. Press OK key to enter menu set mode.
2. Press ! or key to select the item that you wish to set. The display is
shown in this order: Key Lock
Audio
TAD setting
PABX setting
Setting.
3. Press OK key to enter the item that you wish to set or press
key to exit
menu set mode.
Key lock
Before setting key lock, you have to input a 4-digit PIN code first. The default setting is
0000.
1. Enter 0000.
2. Press OK key, the display on the right is
shown.
3. Press ! or key to select “Off” or “On”
from the display.
4. Press OK key to confirm and return to the previous mode.
5. Press
key to return to the main menu.
Note: All the previously stored settings are shown after opening the submenu.
Audio settings
During standby mode,
1. Press OK key to enter the menu set mode.
2. Press ! or key to select the item
“Audio” from the display.
3. Press OK key to enter Audio setting. The
display on the right is shown.
4. Press ! or key to select the item that you wish to set. The display is
shown in this order: Ring Tone
Ring Loudness
Key Tone
dashes to
show that you have reached the end of the menu.
5. Press OK key to enter the item that you wish to set.
6. Press
key to return to the previous menu.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETUP
Ringer melody setting
During Audio setting mode,
1. Press ! or key to select “Ring Tone” from the display.
2. Press OK key to enter.
“Ring Tone-1” is displayed and the sound of the current tone can be heard.
3. Press ! or key to select the step. There are 5 steps for adjustment.
4. Press OK key to confirm the selection and return to the previous mode.
Ringer loudness setting
During Audio setting mode,
1. Press ! or key to select “Ring Loudness” from the display.
2. Press OK key to enter.
“Loudness-4” is displayed and the sound of the current step can be heard.
3. Press ! or key to select the step. There are 4 steps and “off” for
adjustment.
4. Press OK key to confirm the selection and return to the previous mode.
Key tone setting
During Audio setting mode,
1. Press ! or key to select “Key Tone” from the display.
2. Press OK key to enter. “Key Tone -Off” is displayed.
3. Press ! or key to switch between “Key Tone On/Off”.
4. Press OK key to confirm the selection and return to the previous mode.
Answering system (TAD) settings
1. Enter “TAD setting” mode (Refer to the operation in “Audio setting” section on
P28).
2. Press ! or key to select the item that you wish to set. The display is
shown in this order: Answering
TAD Rings
TAD PIN
Call Screen
dashes to show that you have reached the end of the menu.
3. Press OK key to confirm the item that you wish to set.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETUP
Answering mode setting
During TAD setting mode,
1. Press
or
key to select “Answering” from the display.
2. Press OK key to enter the mode.
3. Press ! or key to select “Answering -A1” or “Answering-A2” from the
display.
4. Press OK key to confirm the selection and return to the previous mode.
TAD rings setting
During TAD setting mode,
1. Press ! or key to select “TAD Rings” from the display.
2. Press OK key to enter the mode.
3. Press ! or key to select the desired item.
There are 2-9 and TS mode (Toll saver) for you to select.
4. Press OK key to confirm the selection and return to the previous mode.
TAD PIN setting
During TAD setting mode,
1. Press ! or key to select “TAD PIN” from the display.
2. Press OK key to enter the mode. The display
on the right is shown.
3. Press the numeric keys to enter the new 3-digit
PIN code, or press ! or key to select
the desired digit’s position.
4. Press OK key to confirm the new PIN code and return to the previous mode.
Call screen mode setting
During TAD setting mode,
1. Press ! or key to select “Call Screen” on the display.
2. Press OK key to enter the mode.
3. Press ! or key to switch between “Screen-Off/On” mode.
4. Press OK key to confirm the selection and return to the previous mode.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETUP
PABX settings
1. Enter “PABX setting” mode (Refer to the operation in “Audio setting” section
on P28).
2. Press ! or key to select the item that you wish to set. The display is
shown in this order: Key PIN
Prefix Number
Prefix
dashes to show
that you have reached the end of the menu.
3. Press OK key to enter the item that you wish to set.
Key lock's PIN
During PABX setting mode,
1. Press ! or key to select “Key PIN” on the display.
2. Press OK key to enter the mode. The display
on the right is shown.
3. Enter 0000 (default value).
4. Press OK key.
5. Press the numeric keys to enter a new number or press ! / key to select
the desired digit’s position.
6. Press OK key to confirm and return to the previous mode.
Prefix number setting
During PABX setting mode,
1. Press ! or key to select
“Prefix Number” from the display.
2. Press OK key to enter the mode. The display
on the right is shown.
3. Press the numeric keys to enter a new number (up to 6 digits) or press ! /
key to select the desired digit’s position.
4. Press OK key to confirm and return to the previous mode.
Prefix setting
During PABX setting mode,
1. Press ! or key to select “Prefix” from the display.
2. Press OK key to enter the mode. “Prefix-Off” appears on the display.
3. Press ! or key to switch between “Prefix-Off/On” mode.
4. Press OK key to confirm the selection and return to the previous mode.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETUP
General settings
During menu setting mode,
1. Press ! or key to select “Setting” from the display (Refer to P28).
2. Press OK key to enter the mode.
3. Press ! or key to select the item that you wish to set. The display is
shown in this order: Contrast
Language
Date/Time
Reset
dashes
to show that you have reached the end of the menu.
4. Press OK key to enter the item that you wish to set.
Contrast setting
During general setting mode,
1. Press ! or key to select “Contrast” from the display.
2. Press OK key to enter the mode. “Contrast-3” is displayed.
3. Press ! or key to select other brightness level (5 brightness levels for
adjustment).
4. Press OK key to confirm and return to the previous mode.
Language setting
During general setting mode,
1. Press ! or key to select “Language” from the display.
2. Press OK key to enter the mode. “English” will appear on the display.
3. Press ! or key to select other languages.
There are Deutsch, France, Italia, Nederland and English for you to choose.
4. Press OK key to confirm and return to the previous mode.
Date / Time setting
During general setting mode,
1. Press ! or key to select “Date/Time”
from the display.
2. Press OK key to enter the mode. The display
on the right is shown.
Date
Month Year
Hour Mins
3. Press the numeric keys to enter the new number or press ! or key to
select the desired digit’s position.
4. Press OK key to confirm and return to the previous mode.
Reset
During general setting mode, if you want to Reset the unit.
1. Press ! or key to select “Reset” from the display.
2. Press OK key to confirm and return to the previous mode.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
CORDLESS HANDSET OPERATION
Cordless Handset Operation
Handset ringer adjustment
Handset ringer melody
During standby mode,
1. Press and hold
MELODY 3
key.
flashes and the current melody option appears.
2. Press ! or key to select the melody option (1 to 9 for adjustment).
3. Press key to confirm.
Handset ringer volume
During standby mode,
1. Press
volume level.
key. Display shows the current
VOLUME 3
2. Press ! or key to select the volume level.
There are 6 levels for adjustment: 1(lowest) to 5 (highest) and “ringer off”.
3. Press key again to confirm.
Handset ringer On / Off
During standby mode, press and hold [ ] key to
switch between ringer On/Off.
HANDSET
1
appears whenever the ringer is Off.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
CORDLESS HANDSET OPERATION
Multi-handset Operation
Your M5500 series phone can have up to 4 handsets registered to the base unit. Each
handset has its own number HS-1, HS-2, HS-3 and HS-4 shown on the left-hand side
of the display. With 2 or more handsets you can:
• Make intercom calls while on an external call
• Switch between an external call and intercom call
• Transfer an external call from one handset to another
• Set a 3-way conference call between yourself, an external call and intercom call
Note:
•
A maximum of 1x external call and 2x intercom calls can take place at the same time.
• If you make an external call + another handset is on line = result in a busy tone.
•You can make an intercom call when the other handset in progress.
Intercom function
To make an intercom call,
1. Press INT key, during standby mode.
The display on the right is shown.
2. Key the handset number (1, 2, 3, or 4) you wish
to call.
When there is an intercom call, the display on the right is shown.
1. Press
or INT key to answer the intercom call.
2. Press
or INT key again to end the call.
Depicts Handset-2 calling
34
Download from Www.Somanuals.com. All Manuals Search And Download.
CORDLESS HANDSET OPERATION
Call transfer between cordless handsets
When there is an incoming external call,
1. Press INT key. The display on the right is shown.
2. Key the handset number (1, 2, 3, or 4) you wish
to transfer.
3. Press
key to exit Intercom mode and return to standby mode.
Transfer a speakerphone call from the base unit to the cordless handset
If there is an incoming external call,
1. Press
2. Press
3. Press
key on the base unit.
on the cordless handset to pick up the call.
key again to cancel the call transfer.
Conference calls
This function allows 3 parties (yourself + external call + intercom call ) to be
connected at the same time.
When there is an incoming external call,
1. Press INT key. The display on the right is shown.
2. Key the handset number (1, 2, 3, or 4) you wish
to invite to the conference.
3. Press
key to pick up the call.
4. Press and hold INT key to go into the 3-way conference mode.
5. Press INT key to go back to Intercom mode.
6. Press
key to exit Intercom mode and return to standby mode.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
CORDLESS HANDSET OPERATION
Cordless handset keypad lock
During standby mode,
1. Press and hold # key to lock the keypad.
HANDSET
1
2. To release keypad lock, press and hold # key
for 3 seconds.
Note: When the keypad is lock,
key and INT key can be used to answer an
external or intercom call.
Registration
Register new handsets on the M5500 base
Before you can use new handsets. You need to
1. Charge the batteries (for 15 hours).
2. Register the handset (to the base unit).
Each handset can register to four base at a time. Each base can register up to 4
handsets.
During standby mode,
1. Press
key.
or
REGISTER
2. Press
key to select “REGISTER”
from the display.
3. Press
key. The display on the right is shown.
BS ?
4. Press the numeric keys to enter the base number.
5. Press
key to confirm.
6. Press and hold
key. The base is now in the registration mode.
7. Press the numeric keys to enter the default PIN (0000).
8. Press key to confirm and return to standby mode.
Note: If the base is full and cannot add any more handsets, you will hear a tone.
See the next section to remove a handset.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
CORDLESS HANDSET OPERATION
Remove handsets
During standby mode,
1. Press
key.
2. Press
or
key to select “REMOVE HS”
REMOVE HS
PIN ?
from the display.
3. Press
key to confirm. The display on the
right is shown.
4. Enter the default value 0000.
5. Press key to confirm and the display on
the right is shown.
REMOVE HS ?
6. Press the numeric keys (1-4) to enter the
handset number.
7. Press
key to confirm and return to standby mode.
Language setting
To select the display language,
1. Press
key during standby mode.
LANGUAGE
2. Press
or key to select “LANGUAGE”
from the display.
3. Press
key to enter the mode.
or key to select Language options on the display.
4. Press
5. Press
key to confirm and return to standby mode.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
CORDLESS HANDSET OPERATION
Handset name
During standby mode,
1. Press
key.
or
NAME
2. Press
key to select “NAME” from
the display.
3. Press
key to enter the mode.
4. Press and hold
key to erase the existing handset name.
5. Press the numeric keys to enter the new handset name.
6. Press
key to confirm.
Reset
During standby mode,
1. Press
key.
or
RESET
PIN ?
2. Press
key to select “RESET” from
the display.
3. Press
key to enter the mode. The display
on the right is shown.
4. Press the numeric keys to enter the PIN.
5. Press
key to confirm.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
ANSWERING MACHINE OPERATION
Answering Machine Operation
Answering machine On / Off
During standby mode,
1. Press and hold
key to switch the answering machine off.
The voice prompt, “Answering off” can be heard followed by two short beeps.
Note: During Off mode, the answering machine is set to Announcement Two
mode automatically. It will answer the call after 12 rings, and then switch to
remote control mode.
During Off mode,
1. Press and hold
key to switch the answering machine on.
The voice prompt, “Answering on, Announcement One” can be heard followed
by a short beep.
OGM (Outgoing Messages)
M5500 has two OGM modes:
OGM1 (Announcement One) mode:
Callers can hear a pre-recorded message “Please leave a message after the beep”
and the unit records the caller's message.
OGM2 (Announcement Two) mode:
Callers can hear the other pre-recorded message “Please call later” . Under this
mode, the caller will NOT have the opportunity to leave a message.
You can also record your own personalized greeting (from 3 seconds to 120 seconds).
Note: The default setting is OGM1 (Announcement One).
OGM setting
1. You can set the OGM mode in the TAD setting mode (Refer to “answering mode
setting” section on P30).
2. Or press
key to switch between OGM1 and OGM2.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
ANSWERING MACHINE OPERATION
Record OGM
1. Press
key to select OGM1 mode or OGM2 mode.
2. Press and hold /ANS key until you hear a
long beep and see Answer/Message light flash.
The display on the right is shown.
3. Speak into the microphone (15cm from the base
unit’s microphone).
4. Press
key to stop recording, the machine will play back recording for review.
Note: If the OGM is less than 3 seconds, it is not valid. The machine will stop
automatically after 2 minutes.
Play OGM
During standby mode,
1. Press /ANS key to play the OGM.
2. Press
key to stop playing and return to standby mode.
Delete OGM
During OGM playing mode,
1. Press X key to delete the OGM.
2. The machine will return to standby mode after 5 seconds.
OGM play to line
If an incoming call ring exceeds the number of rings
setting (Refer to “TAD rings setting” section on
P30), the answering machine will pick up the call
and play the OGM message. The display on the
right is shown.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
ANSWERING MACHINE OPERATION
ICM (Incoming Messages)
Record ICM
During OGM 1 mode, the machine can record callers’ messages.
During recording mode, the display on the right is shown.
The machine will stop recording 6 seconds after the
caller hang up the phone, or stop automatically after
recording 2 minutes.
Or you can stop recording by pressing
key.
Note: The CID number is displayed if you have subscribed to that service.
The Message recording time is from 3 seconds to 120 seconds.
Play ICM
Incoming messages are played back in the sequence they were recorded. Day and
time of the recording is announced before each message.
When there are new messages, only new messages are played back. Old messages
can be played back only when all new messages have been played back.
Answer / Message light flashes when new messages are waiting. To play messages:
1. Press
2. To pause, press
3. Press key to resume.
key.
key.
4. To replay the current message, press ! key during message playing.
5. To replay the previous message, press ! key twice.
6. To skip to next message, press key twice.
7. Press
key to stop playing.
Note: No announcement will be played back, if the day/time is not set properly.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
ANSWERING MACHINE OPERATION
Memo
Record memo
You can record memos for other users of the unit to hear. The maximum recording
time is 2 minutes.
During standby mode,
1. Press and hold MEMO key until you hear a
long beep. The display on the right is shown.
2. Speak into the microphone after the beep.
3. Press
key to stop recording or recording will stop after 2 minutes.
The recorded memo will playback automatically for review.
Play memo
The memo is played back together with the incoming messages (ICM).
1. Press
key during standby mode.
2. Press
key to stop playback or it will stop when the memo is finished.
For “Pause/Skip forward/backward” during playing, refer to the operation of “Play
ICM” on P41.
Delete messages
Delete one message
While you are listening to a message,
1. Press X key. The display on the right is shown.
2. Press OK key to confirm and you will hear
“Message deleted”.
3. Press
key to cancel the action.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
ANSWERING MACHINE OPERATION
Delete all messages
While you are listening to a message,
1. Press and hold X key. The display on the right
is shown.
2. Press OK key to confirm and you will hear “All
message deleted”.
3. Press
key to cancel the action.
Remember to delete messages!
To avoid exceeding the memory storage capacity, always delete messages after
listening.
Note: The unit will NOT delete the messages you have NOT listened to.
Memory full
Memory will be full in the following 2 cases:
1. During Memo/OGM/ICM recording, the unit becomes full.
2. The memory has been full and somebody is
trying to record new Memo/OGM/ICM message.
In both of the above situations, the unit will prompt
“Answering Machine Full” and the display on the
right is shown.
OGM mode will change to OGM 2 automatically after Memory full.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED ANSWERING SYSTEM
Advanced Answering System
Remote control
You can access your answering machine when you are away by using any touch tone
phone. You have to enter the Security PIN to access the answering machine. The
default PIN is 321 (Refer to “TAD PIN setting” on P30).
Access the answering machine remotely
1. Place a call to your answering machine.
When the answering machine answers the call, it will play the OGM.
2. To skip the OGM, press
key.
3. Enter the 3-digit Security PIN after you hear a beep.
4. Press a numeric key to carry out the desired function. For example, press the
numeric key 2 to check your message remotely.
Note:
●
You have three attempts to enter the correct PIN or the answering machine will
drop the line.
●
The connection will be cut off after 10 seconds if no numeric key is pressed.
●
The message is paused and lasts for 30 seconds. Press 2 key to resume
playback. Otherwise, the connection will be cut off automatically after 30 seconds.
●
During remote playback, the machine will stop for 10 seconds every 168 seconds
and wait for users to response. If no response received, the machine will stop
operation and drop the line.
Remote operation keys
Keys on remote phone keypad
Operation
Replay the current message
1
1(1)
2
Skip back to the previous message
Play new messages /Pause during playing messages
Skip forward to the next message
Playback OGM
3
4
5
Record a new OGM
6
Stop playback or recording
7
Delete the current message
Switch the machine off
8
9
Switch the machine on / Switch between OGM1 or OGM2
Delete all old messages
0
*
Skip announcement during playback
Recording MEMO
#
44
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED ANSWERING SYSTEM
Call screening
Call screening function allows you to hear the caller (who it is) before you pick up the
call during recording incoming messages.
To activate call screening, operate in Menu setting (refer to “call screening mode
setting” section on P30).
Toll saver
Toll saver option is useful when using the remote access feature. You can see whether
there are new messages or not in your answering machine from a remote location.
If your answering machine rings 5 times before answering your call, it means there
are NO new messages.
If your answering machine rings 2 times before answering your call, it means there
are new messages.
You can set the number of times the answering machine would ring before it answers
the call. (Refer to “TAD rings setting” on P30).
This only applies when the answering machine is turned on.
Remote turn-on
Remote wake-up function allows you to turn on your answering machine remotely,
1. Place a call to your answering machine.
If the answering machine is off, it will answer your call after 12 rings.
2. To skip the OGM, press
key.
3. Enter the 3-digit Security PIN after you hear a beep.
4. Press Numeric key 9 to switch your machine on.
Cordless handset detection
The answering machine can detect the cordless handset while recording messages.
It automatically stops recording when you pick up the call using the cordless handset.
Note: The message recorded before you pick up the call will be deleted.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
Appendix
Troubleshooting
Problem
Possible cause(s)
Solution(s)
1. Check CONNECTION to power and telephone line.
2. Move handset CLOSER to base unit.
3. CHARGE battery.
1. The base unit is not properly connected.
2. Too far from the base unit.
3. Battery charge is low.
No dial tone on
the cordless
handset.
4. RE-INSERT batteries and check + and .
4. Incorrect battery polarity.
1. The handset is not registered. If the
handset is unregistered, it displays
UNREGISTERED.
Antenna
symbol is
flashing.
1. REGISTER the handset.
2. Move CLOSER to the base unit.
2. The handset is out of range.
No beep when
the cordless
handset is
placed on the
charger.
1. The handset is not placed properly on
the charger.
2. Charging contacts are dirty.
3. The handset tone is turned off.
4. The handset’s power is turned off.
1. Lift handset off the charger and carefully
REPOSITION correctly.
2. CLEAN charging contacts with a clean and dry cloth.
3. Turn ON the handset tone from the Sounds Menu.
4. CHECK batteries.
Handset charged
for 24 hours but
Battery icon
1. Handset battery is defective or faulty.
2. Handset is not placed properly on the
charger.
1. REPLACE with new AAA rechargeable NiMH
batteries.
2. CHECK to make sure the battery icon is scrolling.
3. RE-INSERT batteries and check + and .
3. Battery installed incorrectly.
remains empty.
No symbol on
the display.
1. Battery is empty.
2. The product is not properly connected.
1. CHARGE battery.
2. Make sure your product is properly PLUGGED-IN.
1. Try a different connection point, one that is away
from other electrical appliances.
2. Install the base unit in a DIFFERENT room OR
use EXTENSION leads.
3. Move CLOSER to the base unit.
Bad audio
quality
(crackles,echo,
etc.).
1. Interference from nearby electrical appliance.
2. Base unit is installed in a room with thick
walls.
3. The handset is too far from the base unit.
Caller ID does
not work.
1. Check your SUBSCRIPTION with the SERVICE
provider.
1. Service not activated.
1. The ringer is off.
Phone does
not ring when a
call comes in.
1. Turn ON the ringer.
2. REMOVE some of the phones from the phone line.
3. Check base unit CONNECTIONS.
2. Too many phones are sharing the same
phone line.
3. Base unit not plugged in.
Keypad does
not work.
Keypad may be locked.
UNLOCK the keypad.
1. Use base unit for calls or RESET as described below.
2. RESET phone by disconnecting main power and
remove batteries. Reconnect after 1 minute.
No dial tone on
handset/base.
1. Chip in handset has frozen.
2. Chip in base unit has frozen.
Busy tone +
in use light on.
1. Other handset may still be connected.
2. Check power supply connection.
1. Check ALL handsets and END all calls.
2. Check CONNECTIONS to wall and base.
1. Handset is busy.
2. Handset is out of range.
3. Wrong handset number.
1. Check ALL handsets and END all calls.
2. Move handset CLOSER to base unit.
3. Check HANDSET NUMBER.
Can’t transfer a
call.
Answering
machine won’t
record.
1. Message limit exceeded.
2. Machine not switched on.
3. OGM2 selected.
1. DELETE old messages.
2. SWITCH-ON the answering machine.
3. Can only record with OGM1, CHANGE to OGM1.
1. Incorrect security PIN.
Remote
operation
doesn’t work.
1. CHECK security PIN.
2. Need to use a TONE-DIALLING phone.
3. Key in the digits within the 10 seconds limit.
2. Some cordless and mobile handsets do
not generate continuous tones.
3. Pausing too long between key press.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
Product Specifications
Phone – Oricom M5500
Frequency range
Channel bandwidth
Operating range
Specifications
1.88-1.897 GHz ˄bandwidth=20MHz˅
1.728 MH
Up to 300m outdoors, up to 50m indoors
Up to 100 hours
Standby time
Talk time
Up to 11 hours
Temperature time
Operating 0ćꢀto 40ć
Storage -20ćꢀto 60ć
Compatibility
Only GAP compatible DECT phones
Up to 4 handsets per base
Up to 4 bases per handset
5 music and 4 monotone
Multiple handset capability
Multiple bases
Ringer melodies
Included Accessories
Battery charge time
15 hours
Rechargeable batteries
AAA Ni-MH 1.2V 600mAh
Mains power supply for base unit
Mains power supply for charger
Input: 230V, 50Hz 60mA, Output:9V,500mA
Input: 230V, 50Hz 60mA, Output:6V,500mA
Answering Machine
Up to 50 phone numbers (Up to 24 digits per Number and 16
characters per Name)
Memory
Redial memory
Recording time
Max 5 phone numbers
At least 11 minutes
47
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
Notes for Operation in NEW ZEALAND
The grant of a Telepermit for any item of terminal equipment indicates only that
Telecom has accepted that the item complies with the minimum conditions for
connection to its network. It indicates no endorsement of the product by Telecom, nor
does it provide any sort of warranty. Above all, it provides no assurance that any item
will work correctly in all respects with another item of Telepermitted equipment of a
different make or model, nor does it imply that any product is compatible with all of
Telecom’s network services. This device may be subject to ringing or bell tinkle when
certain other devices are connected to the same line. If this occurs, the problem should
not be referred to the Telecom Faults service.
This equipment shall not be set to make automatic calls to the Telecom “111”
Emergency Service. This equipment may not provide for the effective hand-over of a
call to another device connected to the same line.
REN (RN for New Zealand)
The REN (Ringer Equivalence Number) or (RN) is of significance only if you wish to
connect more than 1 telephone to your telephone line. A standard telephone line has
a maximum REN capacity of 3 (RN of 5). It is possible to connect 3(5) devices with a
REN of 1 (RN of 1) with no degradation to the product’s performance. Exceeding this
limit may cause the volume of the ringer in any phone to decrease or not ring at all.
Caller ID
Customers using non Telecom toll services should not use the dial back feature for
local calls as this will incur a charge only the 7 digit number should be dialled. Some of
the CID services listed may not be available in New Zealand.
This telephone is not designed for making emergency telephone calls when the power
fails. Make alternative arrangements for access to emergency services.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
Warranty Information
(a) Warranty.
Oricom warrants that the product is free from defects in materials and workmanship
for a period of 12 months effective from the date of purchase. This warranty in
no way affects your statutory warranty under the Trade Practices Act 1974 or
any other similar legislation. It is important that you read the Warranty Card as
it contains full and additional details of the warranty, limitation of warranty and
conditions for receiving the warranty services during the warranty period. The
Warranty Card is located in the package. If you cannot locate the Warranty Card,
please contact our Customer Support Service on 1300 889 785.
(b) Exclusion and limitation of liability.
Oricom will not be in breach of a warranty or condition expressly stated in this User
Guide or the Warranty Card or implied by the Trade Practices Act and excludes
any liability arising under any statutory or common law for damages or any other
remedy if the damage occurs as a result of:
(i)
failure by you to follow the instructions in the User Guide for the installation
and proper functioning of the product;
(ii) negligence on your part or misuse by you of the product;
(iii) any un-controlled external cause to the phone not functioning including but
not limited to electricity failure, lighting, over voltage;
(iv) non adherence by you to the warnings in the User Guide and the User Guide
generally;
(v) modification to the product or services carried out to the product by anyone
other than Oricom or on Oricom’s behalf.
Oricom will not be liable for consequential losses including loss of profits arising
from a cause of action in contract, tort or any other statutory or common law (except
where a statute or any law prohibits this exclusion). The warranty does not extend to
damage caused by misuse, negligence, excessive voltage, faults on the telephone
line or lightning. This warranty in no way affects your statutory rights. Full details of the
warranty are contained in the enclosed warranty card.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Support
Customer Support Australia
Customer Support New Zealand
Email: [email protected]
Fax: (02) 4574 8888
Email: [email protected]
Fax: (09) 574 2722
Ph: 1300 889 785
Ph: 0900 50 025 (Toll Call)
bringing people together
Postal Address
Oricom International Pty Ltd
Locked Bag 658,
Atlas Gentech (NZ) Limited
Private Bag 14927,
Panmure, Auckland,
New Zealand
South Windsor NSW 2756,
Australia
Download from Www.Somanuals.com. All Manuals Search And Download.
|