Oregon Scientific Weather Radio PS M02 User Manual

Full Weather Station with Radio Controlled  
Clock and Projection  
(Model #: PS-M02 / PS-M02U)  
User Manual  
PS M02 English Cover R7 op  
1
7/24/03, 11:57 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  
ABOUT THIS GUIDE  
In this box, you will find:  
Congratulations on your selection of the Philippe Starck  
with Oregon Scientific Full Weather Station with Radio  
Controlled Clock and Projection (PS-M02 / PS-M02U).  
This powerful device bundles time keeping, alarm,  
indoor and wireless outdoor temperature and humidity  
monitoring, weather forecasting, and projection features  
into a single tool you can use from the convenience of  
your home.  
Main unit  
Remote sensor  
Batteries  
AC/DC power adapter  
Keep this manual handy as you use your new product.  
It contains practical step-by-step instructions, as well as  
technical specifications and warnings you should know.  
2
PS M02 English R18 op  
2
7/24/03, 11:56 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  
DESCRIPTIONS  
PRODUCT OVERVIEW  
TOP VIEW  
1.  
2.  
3.  
Snooze / Light button  
Light sensor  
Projection lens  
1
2
3
3
PS M02 English R18 op  
3
7/24/03, 11:56 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  
LCD DISPLAY  
DESCRIPTIONS  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
Low battery icon  
Clock  
Barometer  
Weather forecast  
Moon phase  
Calendar  
Temperature and humidity  
Alarm  
1
2
3
4
7
8
5
6
4
PS M02 English R18 op  
4
7/24/03, 11:56 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  
BACK VIEW  
BUTTON DESCRIPTIONS  
1
1.  
2.  
3.  
4.  
5.  
6.  
7.  
Select - switch modes / change settings  
Focus - focus projector  
Up - increase setting / activate auto-synch  
Down - decrease setting / deactivate auto-synch  
Rotation - rotate projector  
2
Alarm -activate / deactivate alarm  
Channel - switch remote unit  
3
4
5
6
7
5
PS M02 English R18 op  
5
7/24/03, 11:56 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  
DESCRIPTIONS  
BOTTOM AND SIDE VIEW  
1.  
2.  
3.  
4.  
5.  
Battery compartment  
Backlight switch  
Reset button  
Light sensitivity knob  
DC power input jack  
NOTE AC power adapter not shown.  
1
2
3
4
5
6
PS M02 English R18 op  
6
7/24/03, 11:56 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  
REMOTE UNIT  
DESCRIPTIONS  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
9.  
Temperature / Trend display  
Low battery icon  
Humidity / Trend / Comfort Level display  
°C/°F switch  
Channel switch  
Reset button  
Battery compartment  
Wall-mount hole  
1
2
4
5
6
7
3
Battery compartment lid  
8
9
7
PS M02 English R18 op  
7
7/24/03, 11:56 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  
GETTING STARTED  
NOTE Insert the batteries in the remote unit before  
you set up the main unit. Do not use rechargeable  
batteries.  
BATTERIES  
Batteries for the remote and main units are supplied  
with this product. Replace them whenever the low  
battery signal ( ) displays. Remove the battery  
compartment lid on the bottom of the main unit, and  
insert the batteries. You will need a small Phillips  
screwdriver to remove the remote unit compartment lid.  
Be sure to match the correct polarity, as shown in the  
battery compartment. Before you close the lid, press  
the RESET button with the point of a blunt object (such  
as a ball point pen).  
AC POWER ADAPTER  
An AC power adapter is supplied for use with the main  
unit. You must connect the power adapter if you wish  
to use the continuous projection or backlight features.  
The jack is located on the side of the unit.  
If the AC power becomes unavailable, the  
NOTE  
unit will automatically switch to battery power.  
SWITCH BETWEEN MODES  
Press SELECT. The selected mode will flash. The  
display will stop flashing if no key is pressed within  
5 seconds.  
8
PS M02 English R18 op  
8
7/24/03, 11:56 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  
CHANGE SETTINGS  
INSTALLATION  
Press and hold SELECT for 2 seconds. Then, press  
UP or DOWN to change each setting. Press SELECT  
to switch options.  
Mount the remote unit on a flat surface using the recess  
holes on the back of the unit.  
For best results:  
Before you insert the batteries, select the  
measurement unit and channel number first.  
Place the unit out of direct sunlight and moisture.  
Do not place the remote unit more than  
20 - 30 meters (60 - 90 feet) from the main  
(indoor) unit.  
Position the unit so that it faces the main (indoor)  
unit. Minimize obstructions such as doors, walls,  
and furniture.  
REMOTE UNIT SET UP  
Up to 3 remote units can be used with this product  
to monitor outdoor temperature and humidity. The  
measurement unit (°C or °F) and channel number  
(1, 2, or 3) switches are located in the battery  
compartment, and should be set prior to installation.  
Additional remote units sold separately. If you  
NOTE  
are using more than one remote unit, be sure to  
select a different channel number for each unit.  
You may need to experiment with various locations to  
get the best reception.  
9
PS M02 English R18 op  
9
7/24/03, 11:56 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  
CLOCK  
NOTE For best results, place the unit away from metal  
or electrical objects, and near a window with a clear  
view to the sky.  
This product can automatically synchronize the date  
and time with official time-keeping organizations in  
Frankfurt, Germany (PS-M02) or Rugby, England  
(PS-M02U). When the unit is within 1500 km  
(932 miles) of a RF signal, the reception icon will blink  
during reception.  
TO DISABLE OR ENABLE AUTO-  
SYNCHRONIZATION  
In Clock mode, press DOWN for 2 seconds to disable  
the auto-synchronization. The unit will not respond to  
radio signals until you reactivate the synchronization.  
RECEPTION  
Reception takes 2 - 10 minutes to complete. Once  
complete, the icon will stop blinking.  
To enable auto-reception, press UP for 2 seconds.  
Strong signal  
Weak signal  
No signal  
10  
PS M02 English R18 op  
10  
7/24/03, 11:56 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  
SET ALARM  
SET OR CHANGE THE CLOCK  
1.  
2.  
3.  
Press SELECT several times until the Alarm area  
flashes.  
1.  
2.  
3.  
Press SELECT to switch to the Clock Mode. The  
time will flash.  
Press and hold SELECT for 2 seconds to enter  
the setting mode.  
Select the 12/24-hour format, hour, and minute.  
Press UP or DOWN to change the setting.  
Press SELECT to confirm.  
Press and hold SELECT for 2 seconds to enter  
the setting mode.  
Select the hour, minute, melody (1 - 7) and  
volume level (Lo or Hi). Press UP or DOWN to  
change the setting. Press SELECT to confirm.  
Press SELECT again when you are finished.  
4.  
ALARM  
SNOOZE  
When activated, the Melody Alarm starts quietly, then  
gradually becomes louder. It shuts off after two  
minutes. The LCD display lights up for the first  
8 seconds.  
Press the SNOOZE/LIGHT button the top of the unit  
to temporarily disable the alarm for 8 minutes. The alarm  
icon will blink while Snooze is activated.  
11  
PS M02 English R18 op  
11  
7/24/03, 11:56 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  
3.  
Select the year, month, date, and language.  
Press UP or DOWN to change the setting.  
Press SELECT to confirm.  
TO TURN THE ALARM OFF OR ON  
Press any button to stop the alarm.  
To turn the alarm off completely (deactivate it for the  
next day), press ALARM.  
NOTE The language options are (E) English, (F) French,  
(D) German, (I) Italian, and (S) Spanish.  
CALENDAR  
MOON PHASE  
SET DATE  
Press SELECT until the Calendar Area flashes. Then,  
press UP or DOWN to change the date and view the  
corresponding moon phase.  
Clock auto-synchronization must be deactivated before  
you manually set the date. (  
10)  
1.  
2.  
Press SELECT several times until the calendar  
area flashes.  
Press and hold SELECT for 2 seconds to enter  
the calendar setting mode.  
12  
PS M02 English R18 op  
12  
7/24/03, 11:56 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  
BAROMETER  
This product tracks barometric pressure changes over  
the past 24 hours to provide the weather forecast  
Trend  
Description  
Pressure change  
(mb/hPa)  
1 hr  
6 hrs  
(
14) and a trend line showing the direction of  
barometric change. Barometric changes are measured  
by the main (indoor) unit.  
+
+
3
Rising  
Steady  
Falling  
1
BAROMETRIC TREND  
The barometric trend arrow for the last 30 minutes is  
always displayed.  
Steady  
-1  
Steady  
-3  
VIEW THE LAST 24 HOURS  
Press SELECT 2 times until the Barometer Area  
flashes. Then, press UP or DOWN to view the last  
24 hours history.  
13  
PS M02 English R18 op  
13  
7/24/03, 11:56 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  
SET UNIT AND ALTITUDE  
WEATHER FORECAST  
You can set the unit of measurement (mb/hPa or inHg)  
and altitude. Setting the altitude allows the product to  
take more accurate barometric measurements.  
This product forecasts the next 12 to 24 hours of  
weather within a 30 to 50 km (19 - 31 mile) radius with  
70 to 75 percent accuracy. The weather forecast is  
always displayed.  
1.  
Press SELECT 2 times until the Barometer Area  
flashes.  
Clear  
Partly Cloudy  
Cloudy  
Rainy  
2.  
3.  
Press and hold SELECT for 2 seconds.  
Select altitude (-100 meters to 2500 meters in  
increments of 10) and the unit of measurement  
(mb/hPa or inHg). Press UP or DOWN to  
change the setting. Press SELECT to confirm.  
TEMPERATURE AND HUMIDITY  
With the press of a button, you can check the current  
indoor or outdoor temperature, humidity percentage,  
comfort level, trend, and record measurements.  
Outdoor measurements are collected by the remote  
unit.  
14  
PS M02 English R18 op  
14  
7/24/03, 11:56 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  
Temperature is given at the top; humidity is below.  
and hold CHANNEL for 2 seconds to enter Auto scan  
mode. If only 1 remote unit is in use, you will not be able  
to change channels or select Auto. If you select “Auto”,  
the channel will change every 3 seconds. To deactivate,  
press and hold CHANNEL for 2 seconds again.  
VIEW MIN / MAX / CURRENT MEASUREMENTS  
Press SELECT 3 times until the Temperature and  
Humidity Areas flash. Press UP or DOWN to scan  
the readings.  
SENSOR SEARCHING  
If there is no remote unit signal, the temperature and  
humidity measurements will be blank. Check the remote  
unit batteries, or press and hold UP and DOWN for  
2 seconds to search for the remote unit(s).  
CLEAR MIN / MAX RECORDS  
While viewing Min/Max records, press and hold UP or  
DOWN for 2 seconds until a beep sounds. This clears  
the previous measurements from the memory.  
Searching  
No sensor  
Sensor found  
SELECT REMOTE UNIT CHANNEL  
While in the Temperature / Humidity Mode, press  
CHANNEL to switch between CH 1, 2, or 3, or press  
15  
PS M02 English R18 op  
15  
7/24/03, 11:56 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  
COMFORT ZONE  
The indoor and outdoor comfort zones are shown for  
the following conditions.  
NOTE  
Signals from household electrical appliances  
such as doorbells and home security systems can  
cause temporary reception failures between the indoor  
and outdoor units. This is normal and does not affect  
the general performance of the product.  
Reception will automatically resume once the  
interference ends.  
Zone  
Temperature  
Any  
RelativeHumidity  
>70%  
Wet  
Dry  
Any  
<40%  
20 - 25 °C  
(68 - 77 °F)  
40 - 70%  
Comfort  
16  
PS M02 English R18 op  
16  
7/24/03, 11:56 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  
SET UNIT  
TRENDS  
While in Temperature / Humidity Mode, press SELECT  
for 2 seconds. Press UP or DOWN to switch between  
°C and °F. Press SELECT to confirm.  
The trend arrow for the last 30 minutes always displays.  
Indoor and outdoor temperature and humidity trends are  
shown separately.  
Trend  
Relative Humidity  
+3%  
Temperature  
BACKLIGHT  
Press SNOOZE/LIGHT to illuminate the backlight for  
5 seconds.  
+
0.5 °C  
Steady  
Steady  
-3%  
CONTINUOUS BACKLIGHT  
The AC power adapter must be plugged in to use this  
feature (  
8).  
-0.5 °C  
1.  
The BACKLIGHT switch is located in the battery  
compartment. Move it to the “ON” position to  
enable the continuous backlight. Move it to the  
“OFF” position to disable.  
17  
PS M02 English R18 op  
17  
7/24/03, 11:56 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  
2.  
3.  
Move it to the “AUTO” position to enable  
continuous backlight controlled by light intensity.  
When activated, the backlight will be on  
whenever the unit perceives that the room is  
dark.  
PROJECTOR  
This product has a built-in projector for viewing time  
and alarm status at night.  
NOTE The maximum projection range is 2 meters  
(6 feet). The image gets larger the farther you display it.  
The Light Sensitivity knob switch is located in  
the battery compartment. Rotate to adjust.  
PROJECT TIME / ALARM STATUS  
In a darkened room, press SNOOZE/LIGHT to display  
the time and alarm status for 5 seconds.  
LIGHT SENSOR  
LIGHT  
FLIP IMAGE  
ON OFF AUTO  
Press SNOOZE/LIGHT again while the projector is  
RESET  
on.  
ROTATE IMAGE  
The ROTATION switch is located on the back of the  
unit. Rotate to adjust.  
4.  
When activated, the continuous backlight will be  
half as bright as usual. To achieve full brightness,  
press SNOOZE/LIGHT.  
18  
PS M02 English R18 op  
18  
7/24/03, 11:56 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  
FOCUS IMAGE  
The FOCUS switch is located on the back of the unit.  
Rotate to adjust.  
RESET SYSTEM  
The RESET buttons are located in the battery  
compartments for the main and remote units. Press  
these buttons with the tip of a blunt object (such as a  
ball point pen) whenever you change the batteries, or  
whenever performance is not behaving as expected  
(e.g., unable to establish radio frequency link with  
remote unit or automatic clock, etc.) This will return all  
settings to default value, and you will lose all stored  
information (minimum / maximum temperature and  
humidity, etc.).  
CONTINUOUS PROJECTION  
The AC power adapter must be plugged in to use this  
feature (  
8),  
Press and hold SNOOZE/LIGHT for 2 seconds when  
the projection is on. When activated, the time and alarm  
status will project continuously.  
Press and hold SNOOZE/LIGHT for 2 seconds again  
to deactivate.  
19  
PS M02 English R18 op  
19  
7/24/03, 11:56 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  
Do not use rechargeable batteries with this  
product.  
Remove the batteries if storing this product for a  
long period of time.  
Do not scratch the LCD display.  
Do not make any changes or modifications to this  
product. Unauthorized changes may void your  
right to use the product.  
The contents of this user manual are subject to  
change without notice.  
SAFETY AND CARE  
Wash the unit with a slightly damp cloth and mild detergent.  
Avoid dropping the unit or placing it in a location where the  
AC power adapter will be stepped on.  
WARNINGS  
This product is designed to give you years of service if  
handled properly. Observe the following guidelines:  
Never immerse the unit in water. This can cause  
electrical shock and damage the unit.  
Do not subject the main unit to extreme force,  
shock, or fluctuations in temperature or humidity.  
Do not tamper with the internal components.  
Do not mix new and old batteries or batteries of  
different types.  
Images not drawn to scale.  
20  
PS M02 English R18 op  
20  
7/24/03, 11:56 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  
TROUBLESHOOTING  
Problem Symptom  
Remedy  
Check here before contacting our customer service  
department.  
Remote  
unit  
Check batteries  
Cannot locate  
remote unit  
(
8)  
Check location  
9)  
Problem  
Symptom  
Remedy  
(
Temp  
Shows “LLL” or Temperature is out-  
“HHH”  
of-range.  
Check sensors.  
Only one sensor is  
Cannot change  
channel  
Strange date /  
month  
Calendar  
Backlight  
Change language  
working (  
15 )  
(
12)  
Clock  
Cannot  
auto-  
synchronize  
1. Remove batteries.  
No continuous  
backlight  
Plug in AC power  
adapter. Check the  
BACKLIGHT switch.  
2. Press RESET. All  
memory items will  
return to default.  
(
8, 17)  
Projector  
No  
continuous  
projection  
Plug in AC power  
adapter  
3. Replace batteries.  
(
8, 18, 19)  
21  
PS M02 English R18 op  
21  
7/24/03, 11:56 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  
SPECIFICATIONS  
Problem Symptom  
Remedy  
4. Place clock near  
window / away  
from electrical  
devices, and wait  
10 - 20 minutes.  
Main unit dimensions  
L x W x H  
129 x 43 x 133.3 mm  
(5.1 x 1.7 x 5.3 inches)  
471 grams with batteries  
Weight  
Remote unit dimensions  
If it still fails, you may  
be too far from a signal.  
L x W x H  
75 x 35 x 78.3 mm  
(3 x 1.4 x 3.1 inches)  
136 grams with battery  
Weight  
Cannot  
change  
clock  
Disable auto-  
synchronization  
Temperature  
Unit  
Range  
(
10)  
°C or °F  
Main unit: -5 ºC to 50 ºC  
(23 ºF to 122 ºF)  
Baro  
Strange reading Set altitude / unit  
(
14)  
22  
PS M02 English R18 op  
22  
7/24/03, 11:56 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  
Remote Unit: -20 °C to 60 °C  
(-4 °F to 140 °F)  
Range  
500 to 1050 mb  
(14.77 to 31.01 inHg)  
1 mb (0.03 inHg)  
-100 to 2500 meters  
(-328 to 8202 feet)  
Rainy, cloudy, partly cloudy, sunny  
24 hour  
1mb change in 1 hour or 3mb  
change in 6 hours  
Resolution  
Comfort  
0.1 °C (0.2 °F)  
Resolution  
Altitude  
20 °C to 25 °C (68 °F to 77 °F)  
(see also, Relative humidity)  
Minimum / maximum  
Memory  
Trend  
Display  
Memory  
Trend  
+
+
/- 0.5 °C ( /- 0.9 °F) change  
Relative humidity  
Range  
Resolution  
Comfort  
Main & Remote Unit 25% to 95%  
1%  
40% to 70%  
(see also, Temperature)  
Minimum / maximum  
3% change  
Remote unit  
RF frequency  
Range  
433 MHz  
30 meters (98 feet) with no  
obstructions  
approximately every 40 seconds  
1, 2, or 3  
°C or °F  
Memory  
Trend  
Transmission  
Channel No.  
Unit  
Barometer  
Unit  
mb/hPa or inHg  
23  
PS M02 English R18 op  
23  
7/24/03, 11:56 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  
Radio-controlled clock  
Power  
Synchronization  
Clock display  
Hour format  
Auto or disabled  
HH:MM:SS  
12hr AM/PM (MSF format)  
24hr (DCF format)  
DD/MMM; weekday selection in  
5 languages (E, D, F, I, S)  
High, medium, and low tide  
7 melody; 2 minute crescendo  
8 minutes  
Main unit  
4 x UM-3 (AA) 1.5V alkaline  
batteries (back-up)  
AC/DC 6V power adapter  
(for normal operation and  
continuous backlight and  
projector)  
Calendar  
Moon phase  
Alarm  
Snooze  
Remote unit  
2 x UM-4 (AAA) 1.5V alkaline  
batteries  
Projector  
Display  
Rotation  
Focusing  
Projection  
Current time / alarm status  
180° and image flip  
Manual  
5-second or continuous  
24  
PS M02 English R18 op  
24  
7/24/03, 11:56 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  
ADDITIONAL RESOURCES  
more about your new product and other Oregon  
Scientific products such as digital cameras, hand-held  
organizers, health and fitness gear, and weather  
stations. The website also includes contact information  
for our customer service department, in case you need  
to reach us.  
25  
PS M02 English R18 op  
25  
7/24/03, 11:56 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  
Additional information:  
EC-DECLARATION OF CONFORMITY  
The product is therefore conform with the Low Voltage  
Directive 73/23/EC, the EMC Directive 89/336/EC and  
R&TTE Directive 1999/5/EC (appendix II) and carries the  
respective CE marking.  
This product contains the approved transmitter module  
TX 07 and complies with the essential requirements of  
Article 3 of the R&TTE 1999/5/EC Directives, if used for  
its intended use and that the following standard(s)  
has/have been applied:  
VS-Villingen / Germany August 2003  
Gerhard Preis  
R&TTE Representative of manufacturer  
Radio frequency spectrum  
(Article 3.2 of the R&TTE Directive)  
applied standard(s) ETSI EN 300 220-3 (Ver.1.1.1):2000-09  
Electromagnetic compatibility  
(Article 3.1.b of the R&TTE Directive)  
applied standard(s) ETSI EN 301 489-1-3 (Ver.1.4.1):2002-08  
RTT&E Compliant Countries:  
All EC Countries, Switzerland CH ,  
Safety of information technology equipment  
(Article 3.1.a of the R&TTE directive)  
and Norway  
N
applied standard(s)  
EN 60950:2000  
©2003 Oregon Scientific. All rights reserved.  
26  
PS M02 English R18 op  
26  
7/24/03, 11:57 AM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Black  

Miller Electric Welding System PipePro 304 User Manual
Nady Systems Microphone 401XQ2HT2LTE4FHE User Manual
NEC Universal Remote SRU 5030 86 User Manual
New Holland Lawn Mower MZ16H User Manual
NordicTrack Treadmill NTL15922 User Manual
Northern Industrial Tools Impact Driver 1961202 User Manual
Numark Industries DJ Equipment DXM09 User Manual
Olympus Computer Drive MAUSB 100 User Manual
Panasonic Server KX TVA50 User Manual
Parkside Sander PBS 600 A1 User Manual