Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT OVERVIEW
1. Focus Dial
2. VGA/Component Input Connector
3. Mini HDMI Connector
4. Battery Indicator
5. Menu / Esc Button
6. Through-hole for straps
7. Enter Button
19
16
8. Power Button
9. Auto Search Source Button
10. Navigation / Volume Button
(up/down/left/right)
11
12
1
11. Speaker
12. Audio Out Connector
13. AV Input Connector
14. MicroSD Card Slot
15. Micro USB port
7
8
4
5
13
14
15
16. Lens
2
3
17. DC Input
18. IR Receiver
9
19. Screw Hole for Tripod Convertor
20. Battery Cover
10
6
20
18
17
DC IN
PACKAGE OVERVIEW
INSTALLING THE BATTERY
1. Remove the battery cover. (
)
1 3
~
1
1
8a
9
2. Insert the battery with the electrical
contact facing downward and away
2
from the lens. (
)
4
3. Ensure that the battery pull tab
extends from under the battery. (
4. Slide the battery cover back into
place over the battery pull tab.
)
5
2
8b
10
3
(
)
6 7
~
4
11
3
8c
5
Standard Accessory
1. Power adaptor with AC Plug
2. VGA Cable
6
4
5
3. USB Male Cable
4. Battery
5. AV Cable
Optional Accessory
6. Mini HDMI Cable
7. Remote Control
8. iPod Connection Kit
6
7
a. USB Cable for iPod Connector
b. iPod Cable
7
c. iPod Connector
9. Component Cable
10. Female USB Cable
11. USB to DC jack cable
<Note>
The standard accessories may vary in each
region due to different applications.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CHARGING THE BATTERY
CONNECT INPUT SOURCE - (VIDEO IN)
1. Remove protection cap and insert
the plug. (
1. Connect the AV input source.
1
)
(
)
1 2
1 2
~
~
2
2. Connect the charger. (
3 4
)
2. After powering on projector, press
"Auto Search Source Button" to
~
3. During charging the LED indicator
lights red. (
)
5
1
change sources.
Projector will not charge while
operating.
3. Connect external speakers to the
audio out connector of the projector.
3
4. The LED Charge Indicator will go off
when battery is fully charged. This
process may take up to 2.5 hours
(
)
2
3
<Note>
1. All other brand and product names are
trademarks or registered trademarks of their
respective companies.
or
or
<Note>
1. For more LED indicator, see page 7.
2. After the projector is turned off, the
battery may not start charging right away
due to over temperature protection.
2. The connecting cable of video output
device is not supplied, please contact their
service center.
1
3. iPod nano/iPod touch/iPhone/iPod classic
(version 5 and above)
4. Designed for iPod/iPhone/Mobile phone/
PMP with TV out functions. Using with
device with audio signal voltage > 0.3Vrms
is not recommended.
4
2
5
or
1
3
<Optional>
The PK201 can also be charged via USB to
2
6
DC cable (
)
CONNECT INPUT SOURCE DATA TRANSFER
CONNECT INPUT SOURCE - (VGA/USB/HDMI/COMPONENT IN)
1. Connect the VGA/Component
source device with the Universal
1. Connect laptop or PC for data
1
I/O connector. (
)
1 2
~
transfer to the Projector internal
memory or additional MicroSD
memory using the supplied Male
USB Cable. When connected,
switch the Projector on.
2. After powering on projector, press
"Auto Search Source Button"
2
1
to change sources.
Insert universal connector
with arrow mark facing up.
M O L E X
or
or
or
2
<Note> The laptop/PC can only detect
the input source when the Projector is
switched on. The projection will stop when this
connection is made.
<Note>
1
1. USB device: Support USB Flash Drive
up to 5V/150mA, but does not support USB
Hard Disk Drive
2. Female USB cable, Component cable,
and HDMI cable are optional accessories.
2
1. Connect the HDMI source device
to the mini HDMI connector.
2. After powering on projector, press
"Auto Search Source Button"
to change sources.
INSERT MICROSD CARD
1
1. Insert a MicroSD card into the
slot with the gold contacts facing
down.
2
1. Connect the USB flash drive to
the micro USB port using the
female USB cable.
2. Select USB Flash Drive from
the Main Menu.
1
2
4
Download from Www.Somanuals.com. All Manuals Search And Download.
USING A TRIPOD STAND
SWITCH ON
ADJUSTING THE PROJECTED IMAGE
Projection Distance (A)
Screen Size - Width (B)
Screen Size - Height (C)
Screen Diagonal (D)
Meter
0.245
0.500
0.700
0.975
1.500
2.000
2.500
3.215
inch
9.6
(mm)
111
(inch)
(mm)
63
(inch)
2.5
(mm)
128
(inch)
4.4
8.9
5.0
10.3
14.4
20.0
30.8
41.1
51.3
66.0
19.7
27.6
38.4
59.1
78.7
98.4
126.6
227
128
179
249
384
511
639
822
5.0
261
318
12.5
17.4
26.8
35.8
44.7
57.5
7.0
365
443
9.8
508
682
15.1
20.1
25.2
32.4
782
909
1043
1304
1677
1136
1461
1. Screw a standard tripod into the
screw hole on the projector.
1. Press the Power button.
B
1
1. Adjust Focus ( ) until image is
1
clear.
DOWNLOADING THE PC SOFTWARE
HOW TO USE THE MENU
Main menu
Use the PC software to encode and transfer all file types to the
Projector.
To install the PC software:
1. Connect the Projector for data transfer (see previous item).
2. Browse the Projector internal memory (like a USB memory stick)
for a folder called "PC Software".
3. In this folder, double-click on the file called "Setup" or "setup.
exe" to begin the installation process, then follow the on screen
instructions.
1. Display the Main Menu. (
2. Highlight the desired option (
3. Enter the desired option. (
4. Highlight the desired item. (
)
)
)
Note: You can find Arcsoft license key on Quick Start Guide
4. After the installation, the "Arcsoft Media Convertor" application is
launched.
▲▼
)
5. Select the item. (
)
6. Press ( ) to go up one directory.
5. To convert and transfer files to the Projector, drag and drop files
to the Arcsoft Media Convertor application window.
Under external signal mode, press (
to bring out the OSD.
• The OSD disappears in 5 seconds if
there is no OSD operation.
• The projector will automatically shut
down if the projector is left idle at
its main menu or file browser for 3
minutes.
)
THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT
PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF
A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-
4 VISUAL STANDARD ("MPEG-4 VIDEO") AND/OR (ii) DECODING MPEG-4
VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL
AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO
PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO.
NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL,
INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED
FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM.
Item
<Note>
External signal mode is applicable for
connecting VGA, Composite, HDMI and
Component signals.
<Note>
The first time you use the projector, you
can select your preferred language from
the quick menu after the startup screen
displays.
F
5
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE MENU - SOURCE: INTERNAL MEMORY, MICRO SD CARD, AND USB FLASH DRIVE
Playing Videos from the Internal Memory / Micro SD Card / USB Flash Drive
Adjust Volume
16
or
or
00:05
00:28
Fast forward
Rewind
Play /Pause
Exit Video mode
Displaying Photos from the Internal Memory / Micro SD Card / USB Flash Drive
or
or
Presentation from the Internal Memory / Micro SD Card / USB Flash Drive
Report
or
or
Finance
Department
Navigating the Settings Menu
Photo Setup
System Setup
Language: Select preferred language
for on-screen menus.
Slideshow Duration: Select duration of
slideshow (Off, 2 sec., 5 sec., 10 sec.).
or
or
LED Mode: Select LED mode (Bright,
STD).
Slideshow Repeat: Enable slideshow
repeat (Off, Repeat All).
Video Setup
Play Mode: Select play mode (Off,
Repeat All, Single).
Projection: Select the projection mode
(Front Desktop, Rear Desktop, Front
Inverted, Rear Inverted).
Version: Displays firmware version.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE MENU - SOURCE: COMPOSITE AV, VGA, COMPONENT, AND HDMI
Input signal source
Bright mode: Full LED power.
Contrast: adjust contrast
F
H. Position: adjust the horizontal
position.
STD mode: Standard LED power.
Front Desktop.
V. Position: adjust the vertical
position.
F
Composite, HDMI or
Component source
Rear Desktop.
F
F
Phase: change the display data
frequency to match the frequency
of your computer’s graphic card.
Use this function only if the image
appears to flicker vertically.
F
Front Inverted.
Rear Inverted.
Frequency: synchronize the signal
timing of the display with the
graphic card. If the image appears
to be unstable or flickers, use this
function to correct it.
4x3 aspect ratio.
16x9 aspect ratio.
Auto aspect ratio.
F
VGA source
<Note>
Only for VGA input source.
TROUBLESHOOTING
COMPATIBILITY MODE
Timing Table
Multimedia Format: Photo
If you experience a problem with your
projector, please refer to the following
information. If a problem persists, please
contact your local reseller or service
center.
Audio Problems
V-Sync
(Hz)
File Format
File Extension
Mode
Resolution
No sound
JPG
JPEG
*.jpg, *.jpeg
• Press the VOLUME + button. (See
page 3.)
640x480
800x600
1024x768
1280x720
1280x800
480i / 480P
576i / 576P
720P
60
60
Battery Problems
60
Image Problems
VGA
Multimedia Format: Audio
File Format
AAC, MP3, PCM, ADPCM, WMA, OGG
Battery capacity is low
No image appears on-screen
• Ensure the cables/charger/
battery are correctly and securely
connected.
60
• Remove the battery and clean the
connectors.
60
• The battery is worn out and needs
to be replaced. See page 3.
• The battery may not charge right
after the projector is turned off due
to the high temperature emitted by
the projector.
60
• Ensure the pins of connectors are
not crooked or broken.
Composite
Component
HDMI
50
50 / 60
50 / 60
• Make sure the projector is
switched on.
1080i
Image is out of focus
• Adjust the Focus Dial.
• Make sure the projection screen
is between the required distance
9.6 to 126.6 inches (0.245 to 3.215
meters) from the projector. See
page 5.
Image is too small or too large
• Move the projector closer to or
further from the screen.
Image is reversed
• Select “Source --> Settings -->
System Setup --> Projection” from
the OSD and adjust the projection
direction.
Multimedia Format: Video
Message
LED
File
Format
Video
Format
Operation
Max Res.
Profile
Battery Charging
Charge Complete
AVI,
MOV,
MP4,
3GP
H.264
Baseline
720X480 30fps
or
LED Indicator
•
:Off / :Green /
:Red
Simple
Profile
720x576 25fps
MPEG4
Xvid
AVI
Message Reminders
• Out of the range
Baseline
AVI
AVI
MJPEG 640X480 30fps Baseline
• High battery consumption
Please charge the battery. (See page 3)
<Note>
1. Video format does not support content
with B-Frame function.
or
2. Please use Arcsoft MediaConverter to
convert video and PowerPoint files.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
|