TX-NR1030
AV RECEIVER
Basic Manual
Advanced Manual found here
E
n
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Step 1:
TV
Personal computer
HDMI
IN
HDMI
OUT
To use the ARC function, connect to the ARC
compatible HDMI jack of the TV and make an
appropriate setting on the unit. See "2nd Step :
Source Connection" of "Step 2: Setting Up".
HDMI cable
HDMI
OUT
HDMI
OUT
HDMI
OUT
Blu-ray Disc/DVD player
HDMI
OUT
Game console
Satellite/Cable
set-top box, etc.
Set-top box/Digital
video recorder, etc.
zꢀ
Audio connection with a TV not supporting ARC
For how to make settings, see the Advanced Manual.
¼
Select an appropriate
connection for your TV.
Connecting the TV and players
1
To connect the TV and the unit, connect the HDMI OUT MAIN
jack of the unit and the HDMI IN jack of the TV using an HDMI
cable. With this connection, it becomes possible to display
the setting screen of the unit on the TV or transmit video/
audio signals from the player to the TV. If your TV supports
ARC (Audio Return Channel), it is possible to play the TV
sound with the AV receiver's speakers with this connection
only. If your TV does not support ARC, you need, in addition
to the HDMI OUT MAIN jack connection, a digital optical cable
connection between the digital audio out optical jack of the
TV and the DIGITAL IN OPTICAL jack of the unit or an analog
audio (RCA) cable connection between the audio output jack
of the TV and the TV/CD analog audio input jack of the unit.
TV
Important: The power cord must be connected only after all
other connections are completed.
AUDIO
OUT
DIGITAL
OPTICAL
OUT
HDMI Cable Connection
The unit has many HDMI jacks on its rear panel and each
of them corresponds to an input selector button of the same
name on the front panel. For example, a Blu-ray Disc player
will be connected to the IN 1 jack and the BD/DVD button
on the front panel will be used to listen to the playback
sound (if the player is CEC compliant, input will be switched
automatically). If you add another Blu-ray Disc player, you
can use any other jack than IN 1. It is possible to change
assignment of the input jacks and input selector buttons.
Another TV can be connected to the HDMI OUT SUB jack.
In this case, press MONITOR OUT on the main unit several
times to display "SUB" or "MAIN+SUB" and select the
output method.You can also enjoy using Zone function with
the HDMI OUT ZONE 2 jack. For details, see the section 6
"Using the multi-zone function" of "Step 3: Playing Back".
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Step 1: Connections
„
The unit supports the HDMI Through function that allows
transmission from players to the TV even if the unit is in
standby.You have to modify the settings to enable the input
selection link with CEC compliant device, connection with
ARC compatible TV, and HDMI Through function. See "2nd
Step : Source Connection" of "Step 2: Setting Up".
rꢀ To enjoy HDCP2.2 protected video, connect the player to
the IN3 jack and the TV to the HDMI OUT MAIN jack of
the unit.Your player and TV need to support HDCP2.2.
rꢀ To play 4K or 1080p video, use the high speed HDMI cable.
rꢀ It is possible to send video and audio of an MHL-enabled
mobile device by connecting the MHL-enabled mobile device
to the AUX INPUT HDMI/MHL jacks on the front panel.
Audio signal connection
5 Use a composite video cable to connect a TV with
composite video input jack or a player with composite
video output jack.
Digital connection: Use a digital optical cable
(OPTICAL) or digital coaxial cable (COAXIAL) for
connection with a player.
1
Composite video cable
Digital optical cable (OPTICAL)
Use an analog RGB cable to connect the unit with a PC.
6
¼ꢀ
As the digital in optical jack of the unit has a
cover, push in the cable against the cover as it is
turned inside.
Analog RGB cable
Digital coaxial cable (COAXIAL)
¼ꢀ
Video signals from the PC connected with the PC IN port will be
output only to a TV connected with the HDMI OUT MAIN/SUB/
<10'|ꢇꢀLCEMꢃ
Analog connection: Use an analog audio (RCA) cable
for connection with a player.
2
To enjoy multi-zone playback of audio of a CD player
or such other player without HDMI output jack, you
need to use the analog audio (RCA) cable to connect
the corresponding jacks of the player and this unit.
For details on the multi-zone function, see the section
6 "Using the multi-zone function" of "Step 3: Playing
Back".
Connecting Components without HDMI
Video signals input to the composite video input jack,
the COMPONENT VIDEO input jack, or the PC IN
port will be upconverted to HDMI signals and then
output from the HDMI output jack. Note that it is
not possible to convert digital audio input signals to
analog or vice versa.
If your AV component does not have HDMI jack, use an
available jack of your component for cable connection with
this unit. Just as the HDMI jacks, other jacks on this unit have
a preassigned input selector button on the front panel. See
the name of the input selector button shown with the jack
when connecting the device.
Analog audio (RCA) cable
1
5
4
6
Connection with turntable: If it uses an MM type
cartridge and does not have a built-in audio equalizer,
3
connect it to the
PHONO jack. If the connected
3
turntable has a built-in audio equalizer, connect it to the
TV/CD jack.
2
¼ꢀ
If it uses an MC type cartridge, install an audio equalizer compatible
with MC type cartridge between the unit and the turntable by
connecting it to the
instruction manual.
TV/CD jack. For details, refer to the turntable's
2
¼ꢀ
If the turntable has a ground wire, connect it to the GND terminal of
this unit. If connecting the ground wire increases noise, disconnect it.
AV Receiver
„
Video signal connection
¼ꢀ
If multiple video signal inputs are put into one input
system, the output will be made in the order of HDMI,
component video, and composite video.
The unit has a video upconversion function. For details, see
the section on the right.
4 Use a component video cable to connect a TV
with component video input jacks and a player with
component video output jacks.
3
2
Component video cable
¼ꢀ
Its transmitted video has higher quality than that
of composite video cable.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Step 1: Connections
back speakers need to be installed.
rꢀ Although Height 1 speakers can
enhance surround effects, we
place Height speakers in a combination
pattern other than those specified.
rꢀ Dolby recommends to place the speakers
as described on “Installing speakers in
ceiling” to obtain the best Dolby Atmos
effect.
Connecting speakers
2
recommend you to add Height 2
Speaker layout
speakers in order to ensure full effects.
rꢀ Install Height speakers such as Front
High and Rear High speakers on the
upper part of the front or rear wall. There
are other types of Height speakers.
F
Using Dolby Enabled Speakers
9
Wide speakers: Placing
speakers
IJ
J
"
makes the front sound field even wider. It
also give smoother transitions between
front and back surround sounds.
#
%
I
$
'
&
The power amplifier of this unit is designed
a
e
b
f
c
d
for 9 ch configuration. Therefore,
78
speakers cannot be used together with
(or ) speakers during playback.
H
GH
IJ
When both groups are connected, you
can switch speakers to be used on the
Quick Setup menu that appears when you
press Q SETUP on the remote controller
(Speaker Layout function).
rꢀ For details on the Speaker Layout
function, see the section 5 "Using Quick
Setup menu" of "Step 3: Playing Back".
rꢀ 11 ch playback is possible by connecting
an external power amplifier to this
unit. See the Advanced Manual for
information on how to connect the
external amplifier.
G
8
7
Dolby Enabled Speaker (Front)
Dolby Enabled Speaker (Surround)
Dolby Enabled Speaker (Back)
a b
c d
e f
A Dolby Enabled Speaker is specially
designed to be used as a Height speaker.
There two types of Dolby Enabled
To enjoy the Dolby Atmos listening mode,
Height 1 speakers or surround back
speakers need to be installed.
5.1 ch: Connect the speakers
to the unit.
output
"#
"#$%&'
front stereo sound. outputs center
sounds such as dialogs and vocals.
create back sound field.
bass sounds and creates rich sound field.
Up to four subwoofers can be connected to
the unit.
$
Speakers, the one is to be placed on
the top board of other speakers such as
front speakers and surround speakers,
and the other is integrated type with the
normal speakers. Dolby Enabled Speakers
designed with their output facing toward the
ceiling to create an elevated audio effect
in the Dolby Atmos and Dolby Surround
listening modes by providing sounds
echoing off the ceiling.
%&
reproduces
'
Height speakers arrangements
(Dolby Atmos)
Front speakers
Center speaker
" #
$
Surround speakers
Subwoofer
% &
'
There are several types of Height speakers
other than those mentioned in the previous
section. See the next section "Combination
patterns of Height speakers 1 and 2" and
select the combination pattern from those
specified for Height speakers 1 and Height
speakers 2.
rꢀ This unit performs optimal sound field
processing for the type of Height speakers
1 and 2 which is registered in initial
Surround back speakers
Height 1 speakers (Front High)
Height 2 speakers (Rear High)
Wide speakers
7 8
9 F
G H
I J
Surround back speakers: Placing
ꢀURGCMGTUꢀCNNQYUꢀRNC[DCEMꢀKPꢀꢈꢃꢁ|EJꢀ
78
configuration that improves sense of
envelopment created by back sound field.
It also improves seamlessness of back
sounds and provides more natural sound
experiences in the sound field.
rꢀ
and
share the same speaker
IJ
GH
terminals. Select either of the groups.
rꢀ To use the multi-zone function, see the
section 6 "Using the multi-zone function"
of "Step 3: Playing Back".
Height speakers 1 and 2: Placing
GH
a height plane.
rꢀ To enjoy the Dolby Atmos listening
mode, Height 1 speakers or surround
or
9F
speakers produce surround effects on
settings (with setup wizard) according to
an actual speaker layout. Note that the
optimal effect cannot be achieved if you
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Step 1: Connections
Installing speakers in ceiling
5
Surround R
8
Surround back R
7
Surround back L
4
Surround L
k
l
i
j
If you use only one surround
back speaker, connect it to
the BACK L terminal.
g
h
Top Front
Top Middle
Top Rear
g h
i j
k l
Ceiling speakers, etc. are used for maximizing effects in
Dolby Atmos or Dolby Surround listening mode. Install
Top Front speakers midway between the position just
above the listening position and the position just above
the front speakers. Install Top Middle speakers just above
the listening position. Install Top Rear speakers midway
between the position just above the listening position and
the position just above the surround back speakers.
F
Height 1 R
H
Height 2 R/
J
G
Height 2 L/
I
1
Front R
2
Front L
9
Height 1 L
3
Center
Wide R
Wide L
Combination patterns for Height speakers 1 and
2
Height speakers1 : Top Front
rꢀ When front speakers are bi-amp connected, you can select
a pattern for Height speakers 2 from the following options.
Not Use/Front High/Top Front/Top Middle/Dolby Enabled
Speaker (Front)/Dolby Enabled Speaker (Surround)/
Dolby Enabled Speaker (Back)
Height speakers 2: Not Use/Top Rear
Dolby recommends the following combination pattern
to obtain the best effect of Dolby Atmos and Dolby
Surround listening modes
Height speakers1 : Top Middle
rꢀ Pair 1 : Top Middle
rꢀ Pair 2 : Top Front / Top Rear
Height speakers 2 cannot be used.
Instructions on how to connect speakers
Height speakers1 : Dolby Enabled Speaker (Front)
The following are the patterns of Height speakers 2 that
can be selected according to the type of Height speakers 1.
Height speakers 2: Not Use/Dolby Enabled Speaker
(Surround)/Dolby Enabled Speaker (Back)
Importantꢉꢀ%QPPGEVꢀURGCMGTUꢀYKVJꢀꢊꢀŝꢀVQꢀꢁꢂꢀŝꢀKORGFCPEGꢃꢀ
You have to change the setting if any of the speakers have
ꢊꢀŝꢀQTꢀOQTGꢀVQꢀNGUUꢀVJCPꢀꢂꢀŝꢀKORGFCPEGꢃꢀ;QWꢀECPꢀUGVꢀWRꢀD[ꢀ
viewing the guidance displayed on the TV screen. Press
RECEIVER and then HOME on the remote controller.
Select "Setup" - "2.Speaker Setup" - "Speaker Settings" -
"Speaker Impedance" and change the default value from
"6ohms" to "4ohms".
Height speakers1 : Front High
Height speakers1 : Dolby Enabled Speaker (Surround)
Height speakers 2: Not Use/Top Middle/Rear High/Dolby
Enabled Speaker (Surround)/Dolby Enabled Speaker
(Back)
Height speakers 2 cannot be used.
Height speakers1 : Dolby Enabled Speaker (Back)
rꢀ Select the item with the cursor buttons of the remote
controller and press ENTER to confirm your selection. To
return to the previous screen, press RETURN.
Height speakers 2 cannot be used.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Step 1: Connections
1/2"-5/8"(12-15 mm)
Assemble the AM loop antenna (supplied).
Cut and remove the plastic coating from the end of the
speaker cable, twist the core and connect it to the terminal.
Make correct connection between the unit's jacks and
speaker's jacks (+ to + and - to -) for each channel. If
connection is wrong, a bass sound may become poor
due to reverse phase. Attaching the supplied colored
speaker cable labels to the + side on the both ends of each
channel's cable will help correct connection.
When using commercially available banana plugs:
tighten the speaker terminals to the end and then insert the
banana plugs. Do not insert the cable core directly into the
hole for banana plug of speaker terminal. (North American
model)
Network Connection
You can enjoy Internet radio and DLNA by connecting
the unit to LAN. The unit can be connected to the router
with an Ethernet cable or to the wireless LAN router with
Wi-Fi connection. In case of wired connection, connect
the Ethernet cable to the Ethernet port. See "4th Step :
Network Connection" of "Step 2: Setting Up".
Connecting the Subwoofer
Up to four subwoofers with built-in power amplifier can
be connected to the subwoofer jacks. Set the cut-off
filter selection switch of the subwoofer to DIRECT. If the
subwoofer does not have a cut-off filter selection switch
but has a cut-off frequency adjusting dial, turn it to the
maximum frequency. If your subwoofer does not have built-
in power amplifier, you can connect a power amplifier
between the unit and the subwoofer.
Other connections
Internet radio
3
AM/FM Antenna Connections
Connect the antennas to listen to AM/FM broadcast. When
listening to the broadcast for the first time, adjust the
antenna position and orientation to get the best reception.
PC
Router
AM loop
antenna
(supplied)
Subwoofer with built-in
power amplifier
NAS
rꢀ The speaker setting is 7.2 ch at the time of purchase.You
can change it manually or by using automatic speaker
setting.
rꢀ Short-circuiting the + cable and - cable or contacting the
cable core to the rear panel of the unit may cause failure.
Also do not connect two or more cables to one speaker
terminal or one speaker to several terminals.
rꢀ Using a speaker with less impedance than the setting
may result in failure.
Headphones Connection
Indoor FM antenna
(supplied)
%QPPGEVꢀUVGTGQꢀJGCFRJQPGUꢀYKVJꢀCꢀUVCPFCTFꢀRNWIꢀꢄꢁꢋꢊ|KPEJꢀ
QTꢀÔꢀꢂꢃꢌ|OOꢆꢀVQꢀVJGꢀ2*10'5ꢀLCEMꢀQPꢀVJGꢀHTQPVꢀRCPGNꢃꢀ
Sound from the speakers will be off while you are using the
headphones.
rꢀ If you selected any other listening mode than Pure Audio,
Stereo, Mono and Direct, connecting headphones will
switch the listening mode to Stereo.
Fix with a tack on
the wall.
(North American models)
(European models)
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Setting Up
Step 2:
Important: When the unit is turned on for the first time, the
setup wizard of the section 2 will automatically be launched.
If you use the setup wizard to make the initial setup,
connect a TV to the HDMI OUT MAIN or SUB jack of the
unit via HDMI connection.
rꢀ You cannot return to the previous screen during speaker
setup, even if you press RETURN.
rꢀ You cannot setup the wide speaker setting in the setup
wizard. For details on setting up the wide speakers, see
the Advanced Manual.
Making the Initial Setup with the Setup Wizard
2
Read before starting the procedure: Set up by
answering the guidance displayed on the TV screen.
Select the item with the cursor buttons of the remote
controller and press ENTER to confirm your selection.
To return to the previous screen, press RETURN.
rꢀ If you terminate the procedure on the way or
change the setting made in the initial setup and
want to call up the setup wizard again, press
RECEIVER and then HOME on the remote
controller, select "Setup" - "7.Hardware Setup" -
"Initial Setup", and press ENTER.
Initial Setup
AccuEQ Room Calibration
Turning the power on
This step you can automatically calibrate
your room to get correct surround sound.
Would you like to cailbrate your room now
or later?
1
Connect the power cord to the outlet. Press ON/
z
STANDBY on the main unit or RECEIVER on the remote
z
Do it Now
Do it Later
HOME Exit
controller to turn the unit on or to standby mode.
Place the speaker setup microphone.
When the start screen above is displayed, before
starting the procedure, place the supplied speaker setup
microphone at the measurement position by referring
to the figure below.
1.
Initial Setup
Select the language first. In the next screen, the summary
of the setup wizard as below will be displayed. Select "Yes"
in this screen and press ENTER on the remote controller.
Language Select
English
Deutsch
Français
Español
Italiano
Nederlands
Svenska
HOME Exit
Initial Setup
Welcome to initial setup. Have you connected all the speakers and devices?
Before starting, please connect speakers and sources.
Now, would you like to start initial setup?
TV
1st Step : AccuEQ Room Calibration
2nd Step
3rd Step
4th Step
:
Source Connection
Remote Mode Setup
Network Connection
:
:
Yes
No
¼ꢀ
This unit includes a removable power cord. Connect the power
HOME Exit
cord to AC INLET of the unit and then connect to the outlet. Always
disconnect the outlet side first when disconnecting the power cord.
When the unit is turned on, a large instantaneous current may
flow affecting functionality of the computer and other devices. It is
recommended to use a separate outlet from that for the computer or
such other sensitive devices.
The setup wizard proceeds in the four steps as below.
„
„
„
„
1st Step : AccuEQ Room Calibration
2nd Step : Source Connection
3rd Step : Remote Mode Setup
4th Step : Network Connection
Listening area
Measurement position
with microphone
Firmware update notification: If the unit is connected
via LAN and there is firmware update available, the
"Firmware Update Available" message will appear. To
execute updating, select "Update Now" with the cursor
buttons of the remote controller and press ENTER. When
¼ꢀ
Correct measurement will not be possible if the microphone is held
by hand. Measurement is not possible if headphones are being used.
„
1st Step : AccuEQ Room Calibration
¼ꢀ
The subwoofer sound may not be detected since it is extremely low
frequencies. Raise the subwoofer volume to around the half of its
maximum volume and make its frequency to the maximum level.
The test tone coming from each speaker will be measured to
enable setting of the number of speakers, volume level, each
speaker's optimum crossover frequencies, and distance from
the primary listening position, and also enable correction of
distortion caused by the room acoustic environment.
"Completed!" appears, press ON/STANDBY on the main
z
¼ꢀ
A loud test tone will be heard during measurement. Measurement
may be interrupted if there is ambient noise or radio frequency
interference. Close the window and turn off the home appliance and
fluorescent light.
unit to turn the unit into standby mode. Then updating will
be completed.
rꢀ The unit automatically turns itself into standby mode 3
minutes after "Completed!" appears on the display. In this
case also, updating will be completed.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Step 2: Setting Up
W X
After placing the microphone at the measurement
position, select "Do it Now" with the cursors and
press ENTER.
Connect the microphone to the SETUP MIC jack of
the unit.
Select "Yes" with the cursors and press ENTER
2.
3.
Press
/
on the remote controller to check the
4.
5.
6.
settings. Press ENTER with "Save" selected. In the next
screen showing that "AccuEQ Room Calibration" is
"On", press ENTER on the remote controller.
rꢀ If there is an error message, follow the on-screen
instruction to remove the error cause.
on the remote controller to check the connection
of other inputs or select "No, Done Checking" and
press ENTER to skip.
If you select "Yes", you will return to the screen of step 2.
If you select "No, Done Checking", you will proceed to step 5.
SETUP MIC jack
Enabling HDMI Linked Operation and Other Functions
In the next screen, you can enable the HDMI linked
operation with CEC compliant device, connection with ARC
compatible TV, and HDMI Through function. Select "Yes"
with the cursors to enable them or "No, Done Checking" to
skip, and press ENTER on the remote controller.
About THX playback
THX recommends setting the speakers manually if
you use THX-certified speakers or playing back with
THX listening modes.
rꢀ THX recommends setting the crossover frequency
to “80Hz(THX)” manually.
rꢀ Due to the electrical complexities and the
interaction with the room, you may notice irregular
results when setting the level or distance of each
speaker. If this happens, THX recommends setting
the speakers and the subwoofer manually.
Speaker
setup
microphone
Select "Yes" with the cursors and press ENTER to
enable the CEC link function or select "No" and
press ENTER to keep it disabled.
Source Connection
Follow the guidance displayed on the TV screen.
4.
The following CEC-compatible devices are found;
Do you wish to turn on the CEC link?
Integra DHS-8.8
AccuEQ Room Calibration
When "Please unplug setup microphone." is
displayed, disconnect the microphone.
7.
Front Speakers Type
Normal
Not Use
Not Use
Height
Height
1
2
Speakers Type
Speakers Type
Yes
No
„
2nd Step : Source Connection
REAR PANEL
HOME
Exit
SURROUND
R
WIDE
R
BACK
R
FRONT
R
FRONT
L
BACK
L
WIDE
L
SURROUND
L
You can check whether or not each input source is
connected correctly.
Set bi-amp only if you use channel amp for each front speaker.
2
ENTER
Nex t
If you select "Yes", the connection with ARC compatible TV
and HDMI Through function will be set to "Auto" and enabled.
When the Source Connection start screen is displayed,
select "Yes, Continue" with the cursors and press ENTER.
1.
When the screen above is displayed, set the items with the
cursors on the remote controller. Select the types for height
1/2 speakers if the height speakers are used. After front and
height speakers types are selected, switch the screen using
cursor l to select the type of subwoofer. After setting the
items, press ENTER on the remote controller. Press ENTER
again in the next screen to start automatic speaker setting.
rꢀ Speaker terminals and settings description display
at the bottom of the screen as you move the cursor
to each item. Please refer to this information on the
screen.
„
3rd Step : Remote Mode Setup
Initial Setup
Source Connection
Initial Setup
This step will start to check if the
connections were made correctly.
Would you like to continue?
Remote Mode Setup
Preprograming remote will give you control
of other devices from AV receiver remote
Would you like to setup your remote to
control your devices? This may take while
a
depending on what and how many you have
connected. You can always come back to remote
setup from setup “8-2 Remote Mode Setup”.
Yes, Continue
No. Skip
HOME
Exit
Yes
No. Skip
The test tones sound from the connected speakers
and automatic speaker setting starts.
5.
6.
HOM
E
Ex it
Select the desired input to check the connection and
press ENTER.
Start playback of the selected device. If connection is
correct, video/audio of the input source selected on the
unit will be played.
2.
3.
Measurement will be made twice for each speaker. It takes
several minutes to be completed. Keep the room as quiet
as possible during measurement. If any of the speakers
do not produce the test tone, check for disconnection.
rꢀ During measurement, each speaker outputs the test
tones at a high volume. Be careful of sound leak
that may disturb your neighbors, or be careful not to
frighten young children.
In this step, you can enable operation of the other components
using the remote controller of the unit. When the Remote
Mode Setup start screen is displayed, select "Yes" with the
cursors and press ENTER on the remote controller. Follow
the guidance to select the desired REMOTE MODE button
and in the keyboard screen, enter the first three characters of
the brand name of the device you are going to program (e.g.,
"ONK" for ONKYO) and search for the remote control code.
The guidance will also explain how to set the remote controller.
After checking the connection, select "Yes" with the
cursors and press ENTER.
rꢀ If you select "No" and press ENTER, the error cause
will be displayed. Follow the guidance to remove the
error cause and check the connection again.
When the measurement is completed, the
measurement result is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Step 2: Setting Up
Wi-Fi Setup
„
does not stay lit, connection has not been established.
Make the setting again. If "Push Button" does not work,
try "Enter Password".
4th Step : Network Connection
Select the authentication method.
Initial Setup
Network Connection
Do you want to connect network connection?
It gives you network services that our AV
receiver support. If you wish to skip this step.
select “No. Skip”.
When the access point is not displayed
c
Select "Other..." with the
cursor on the remote
Enter Password
Push Button
PIN code
controller and press ENTER to display the keyboard
screen. Input the SSID and password. Make the
following settings according to the router setting.
Yes
When the screen above is displayed, select and set one
of the three authentication methods: "Enter Password",
"Push Button" and "PIN code". See below for details of
and how to set each method.
No. Skip
„
WPA/WPA2 method
HOME
Ex it
Select "WPA" or "WPA2" in "Security Method", select
"OK" and press ENTER.
You can check the network connection and make the Wi-
Fi setting. When the Network Connection start screen is
displayed, select "Yes" with the cursors and press ENTER
on the remote controller. If you select "Wired" in the next
screen, you can view the Ethernet cable connection status.
To make the Wi-Fi setting, select "Wireless", press ENTER
on the remote controller and follow the sections below.
„
WEP method
Enter Password: Enter the password of the access point to
establish connection.
Select "WEP" in "Security Method" and select
"Default Key ID". Then select "OK" and press ENTER.
rꢀ If encryption setting has not been made on the
wireless LAN router, select "None" in "Security
Method", select "OK" and press ENTER.
Select "Enter Password" with the cursor buttons and
press ENTER.
1
¼
Enter the password ( ) on the keyboard screen, select
2
"OK" with the cursor buttons and press ENTER.
¼ꢀ
Select "Shift" and press ENTER to toggle between upper and lower
ꢀ
ꢁ
case. Select " " or " " and press ENTER to move the cursor to the
selected direction. Select "Back Space" and press ENTER to delete
the character at the left of the cursor position. To select whether to
Make the following preparations.
Wi-Fi connection requires an access point such as
wireless LAN router ( ). Write down the SSID and
„
Exiting the setup wizard
¼
¼
mask the password with " " or display it in plain text, press D on the
remote control. Press + 10 on the remote controller to enable the
"Shift" function and CLR to delete all the input characters.
After finishing the initial setup, keep "Finished" selected
and press ENTER on the remote controller. Connection and
setting of the unit is now completed. See Step 3 and enjoy
your home theater.
password (key) of the access point if they are shown
in the label of the main body. If the access point has
an automatic setting button (may be called differently
according to the manufacturer), you can set up
without inputting the password. For how to use the
automatic setting button of the access point, refer to
its instruction manual.
If the security method of the access point to be
connected is WEP, select "Default Key ID", select "OK"
and press ENTER.
3
Push Button: Use the automatic setting button of the
access point to establish connection.
¼ꢀ
The unit supports Wi-Fi connection with 2.4 GHz
access point.
Select "Push Button" with the cursor buttons and press
ENTER.
1
Hold down the automatic setting button of the access
point for the necessary seconds, select "OK" with the
cursor buttons and press ENTER.
2
Select the SSID of the access point to be connected
with the cursor buttons and press ENTER.
When the SSID of the access point appears on the TV
screen, select the desired access point.
rꢀ If you changed the initial setting of the access point to
skip password entry, step 3 starts automatically.
rꢀ If you changed the initial setting of the access point
to hide the SSID, see "When the access point is not
displayed".
1.
2.
PIN code: Select this method when the automatic setting
button of the access point is beyond the reach. Select "PIN
code" with the cursor buttons and press ENTER to display
the 8-digit PIN code. Register the displayed PIN code to the
access point, select "OK" with the cursor buttons and press
ENTER. For how to register the PIN code to the access
point, refer to its instruction manual.
Select and set the authentication method.
The "Enter Password" screen may be displayed, instead
of the screen shown below, if the access point device
does not have an automatic setting button.
Establish connection.
3.
The connection process starts and the Wi-Fi indicator
on the left of the unit's display starts flashing. When
connection has been established, the Wi-Fi indicator
changes from flashing to staying lit. If the Wi-Fi indicator
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Playing Back
Step 3:
Remote Controller Parts Name
2
3
RED
RECEIVER
ALL OFF
SOURCE
MY MOVIE
ZONE
MY TV
GREEN
7
8
Playing the player and TV
1
SLEEP
1
1
RECEIVER button: Turns the unit on or into standby
z
mode.
2
3
RED
GREEN
RECEIVER SOURCE
ZONE
MY MUSIC
SLEEP
ALL OFF
MY MOVIE
MY TV
MY MUSIC
2 REMOTE MODE/INPUT SELECTOR button: Switches
REMOTE MODE
BD/DVD CBL SA
/
INPUT SELECTOR
/
T
STB
/
DVR
GAME
PHONO
BLUETOOTH
MUTING
REMOTE MODE
/
INPUT SELECTOR
STB/DVR
GAME
P
C
AUX
NET
TV
/
CD
TUNER
MODE
USB
the input to be played.
Cursor buttons and ENTER button: Moves the cursor
and confirms the selection.
REMOTE MODE
BD/DVD
CBL/SAT
T
V
RECEIVER
T
V
VOL
OL
INPUT
3
TOP MENU
ENU
GUIDE
ECH
YLIST
PC
AUX
TV/
CD
PHONO
BLUETOOTH
MUTING
PLAYLIST
ENT
2
RECEIVER
Q
9
F
SETUP
HO
4 Q SETUP button: Displays the Quick Setup menu that
allows you to set the frequently used functions including
input selection and volume adjustment.
5 Listening mode buttons: Allows you to select the
listening mode.
6 DIMMER button: Switches the brightness of the display.
This button also turns MASTER VOLUME indicator on
and off.
TUNER
MODE
NET
USB
REMOTE MODE
TV
RECEIVER
z To control the unit: The remote controller of this unit has
the remote mode function for controlling other devices.You
cannot control this unit when the remote controller is in the
remote mode other than RECEIVER mode (for controlling
CH
DISC
TV
VOL
VOL
ALBUM
G
INPUT
this unit). Be sure to press
RECEIVER to select the
9
TOP MENU
MENU
RECEIVER mode before starting operation.
7 ZONE button: For use when the unit is connected with
an integrated amplifier in a separate room and sound is
played there.
GUIDE
PREV CH
PLAYLIST
Turning the power on
1.
3
4
PLAYLIST
ENTER
Press
RECEIVER on the remote controller to turn
the power on.
1 z
8 SLEEP button: Sets the time until the unit enters
Q
H
I
standby mode automatically.
rꢀ Switch the input on the TV to that assigned to the
unit. Use the TV's remote controller.
SETUP
RETURN
HOME
9 RECEIVER button: Switches the remote controller to
the mode for operating this unit.
Select the input of the unit and start playback on the
player or TV.
2.
MUTING button: Temporarily mutes audio.
VOLUME buttons: Allows you to adjust the volume. This
button also cancels the muting.
RETURN button: Returns the display to the previous
state.
HOME button: Displays the Home menu that allows you
to make advanced settings and use Internet radio and
DLNA.
F
G
rꢀ Press
INPUT SELECTOR to which the desired
2
player has been assigned. Press TV/CD to play the
TV's sound.You can also use the input selector
buttons on the main unit.
rꢀ Input will automatically be selected if the TV or player
is CEC compliant and connected to the unit with
HDMI cable.
H
I
SEARCH
MOVIE/TV
REPEAT
MUSIC
RANDOM
GAME
MODE
THX
5
6
1
4
7
2
5
8
0
3
6
9
DISPLAY button: Switches the information on the
display.
J
Select the desired listening mode.
3.
4.
Press
listening mode buttons to switch the mode so
5
rꢀ The buttons other than
to
are for operating other
1
J
that you can enjoy different listening modes. For details
about the listening modes, see "Listening modes" on the
next section.
devices.
10
11
12
+
10
CLR
DISPLAY
J
D.TUN
DIMMER
Adjust the volume with
.
G
-
RC 884M
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Step 3: Playing Back
"Bass": Allows you to enhance or moderate the low
pitched range.
"Treble": Allows you to enhance or moderate the high
pitched range.
"Phase Matching Bass": Allows you to keep the clear
midrange and effectively enhance the low pitched range.
Listening Modes
Listening to AM/FM Radio
2
You can select a listening mode from various options such
as Dolby Digital, Dolby Atmos and DTS. Select the desired
mode by switching and listening actual sound in different
modes. The selectable listening modes depend on the
format of the input signals.
The Basic Manual explains the method using automatic
tuning. For manual tuning, see the Advanced Manual.
Press TUNER on the main unit several times to
select either "AM" or "FM".
Press TUNING MODE on the unit, so that the "AUTO"
indicator on the display lights.
1.
2.
3.
„
Muting Temporarily: Press MUTING on the remote
controller. To cancel the muting, press MUTING again, or
press VOL j/l.
MOVIE/TV:You can select a listening mode suitable for
movies and TV programs.
„
Changing the Display Brightness: Press DIMMER on
the remote controller. The display brightness changes each
time you press the button.
MUSIC:You can select a listening mode suitable for music.
GAME:You can select a listening mode suitable for games.
THX:You can select a THX listening mode.
Press TUNING
on the unit.
The automatic tuning to a radio station starts. Searching
stops when one is tuned. When tuned into a radio
station, the " TUNED " indicator on the display lights.
The "FM STEREO" indicator lights if the radio station is
an FM radio station.
„
Checking the Input Format: Press DISPLAY on the
remote controller several times to switch the display of the
main unit in order of:
PURE AUDIO (main unit only): The display and analog
video circuits are cut off to provide purer sound.
rꢀ For details on the listening modes, see the Advanced
Manual.
TUNED
AUTO
Input source &
Listening mode
"Direct" for playing the input signals as-is
Selecting this mode allows the input signals to be
played as they are. For example, 2 ch signals of music
CD will be played in stereo, 5.1 ch signals in 5.1 ch,
and Dolby Digital signals of blu-ray disc or DVD in the
Dolby Digital sound field according to the specified
number of channels.
Signal format & Sampling
frequency
FM STEREO
(Actual display depends on the country.)
Input signal resolution & Output
resolution
Registering an AM/FM Radio Station
It allows you to register up to 40 of your favorite AM/FM
radio stations.
Other Useful Functions
1. Tune into the AM/FM radio station you want to
register.
rꢀ If "Dolby D 5.1" is displayed in signal format, the Dolby
Digital 5.1 ch signals are being input. When listening to
AM/FM radio, the band, frequency and preset number
are displayed.
„
Playing Video and Audio from Different Sources: It is
2. Press MEMORY on the unit.
possible to play audio and video from different sources. For
example, you can play audio from the CD player and video
from the BD/DVD player. In this case, press BD/DVD and
then TV/CD. Then start playback on the BD/DVD player and
CD player. This function is effective when an input with audio
only has been selected (TV/CD, TUNER or PHONO in the
initial setting).
The preset number on the display flashes.
3. Repeatedly press PRESET
on the unit to select
a number between 1 and 40 while the preset number
is flashing (about 8 seconds).
4. Press MEMORY on the unit again.
When registered, the preset number stops flashing.
To select a preset radio station, press PRESET
QPꢀVJGꢀOCKPꢀWPKVꢀQTꢀ%*ꢀꢍꢋŨꢀQPꢀVJGꢀTGOQVGꢀEQPVTQNNGTꢃ
„
Adjusting Sound Quality: It is possible to enhance
or moderate the low and high pitched ranges of front
speakers. Press TONE on the main unit several times to
select the desired setting from "Bass", "Treble", and "Phase
Matching Bass" and adjust with +/-.
rꢀ It cannot be set if the listening mode is Pure Audio, Direct
or THX.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Step 3: Playing Back
Playing Sound of the Bluetooth-enabled Device
Connecting and playing the Bluetooth-
enabled device
Using the Home menu
3
4
If the unit is on and the Bluetooth-enabled device is
connected, the input will be automatically switched to
BLUETOOTH. Play music in this state.
rꢀ It may take about a minute until connection is established
when the unit is on since the Bluetooth function takes
some time to start up.
rꢀ If the volume setting on the Bluetooth-enabled device is
low, the sound will not be output from this unit.
rꢀ Due to the characteristics of Bluetooth wireless
technology, the sound produced on this unit may slightly
be behind the sound played on the Bluetooth-enabled
device.
In the Home menu, you can make advanced setup and
use Internet radio and DLNA function. For details on the
operation, see the Advanced Manual.
You can wirelessly enjoy music files stored in a smartphone
or other Bluetooth-enabled device. The coverage area is
ꢊꢎ|HGGVꢀꢄꢁꢅ|OGVGTUꢆꢃ
After pressing RECEIVER, press HOME on the
remote controller.
The Home menu is displayed on the TV screen.You can
also use the HOME button on the main unit.
1.
HOME
rꢀ The Bluetooth-enabled device needs to support the
A2DP profile.
Setup
rꢀ This unit is compatible with SCMS-T copy protection
scheme. It is possible to playback the music of Bluetooth-
enabled devices that support SCMS-T protection
scheme.
rꢀ Note that connection is not always guaranteed with all
Bluetooth-enabled devices.
Select the item with the cursor buttons of the
remote controller and press ENTER to confirm your
selection.
To return to the previous screen, press RETURN. To
return to the Home menu, press HOME.
2.
„
Sleep Timer: Select to turn the unit into standby mode
Pairing
automatically when the specified time elapses.
„
InstaPrevue: Select to preview videos input from the
Pairing is necessary when using the Bluetooth-enabled
device for the first time. Before starting the procedure, learn
how to enable the Bluetooth setting function and to connect
with other devices on the Bluetooth-enabled device.
HDMI input jacks collectively in a single screen. The screen
has a main window (current input video) and sub windows
(other input videos). To switch the current input, select the
desired sub window with the cursor buttons and press
ENTER.
rꢀ A black sub window is shown for the input with no video
signals.
Press BLUETOOTH on the remote controller.
The unit enters the pairing mode and the BLUETOOTH
indicator starts flashing.
1.
rꢀ "InstaPrevue" cannot be selected if the video is being
input from HDMI IN 5, 6 or 7 or if there is no signal from
the input currently selected.
rꢀ "InstaPrevue" cannot be selected if "Zone 2 Monitor Out"
is set to "Use" and Zone 2 is on.
rꢀ Depending on video signals, the picture may not be
properly rendered on the preview thumbnails.
While the BLUETOOTH indicator is flashing (about
ꢀ|OKPWVGUꢁꢂꢃEQORNGVGꢃEQPPGEVKQPꢃQPꢃVJGꢃ$NWGVQQVJꢄ
enabled device in the nearby area.
If the name of this unit is displayed on the Bluetooth-
enabled device's display, select this unit. Paring will be
completed after a short time.
rꢀ If a password is requested, enter "0000".
rꢀ When connecting the unit to any other Bluetooth-
enabled device, start pairing by holding down
BLUETOOTH until the BLUETOOTH indicator starts
flashing. This unit can store the data of up to ten
paired devices.
2.
„
Setup:You can change the assignment of input
terminals and input selector buttons and also make various
speaker settings and other advanced settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Step 3: Playing Back
„
Network Service: Select to use Internet radio services
Subwoofer 1/2 Level, Center Level: Adjust the speaker
level while listening to the sound. The adjustment you
made will be reset to the previous status when you turn
the unit to standby mode.
rꢀ The speakers cannot be adjusted if they have been
set to "No" or "None" in "Speaker Configuration".
rꢀ "Subwoofer 2 Level" cannot be adjusted if
"Subwoofer" have been set to "1ch" in "Speaker
Configuration".
Using Quick Setup menu
and the DLNA function. When you connect the unit to the
network and press ENTER, the network service screen will
be displayed on the TV. On the TV screen, select the desired
service or music file with the cursors of the remote controller
and press ENTER to confirm and start playback.
5
In the Quick Setup menu, you can set frequently used
functions including input selection and volume adjustment.
Press Q SETUP on the remote controller.
The Quick Setup menu is displayed on the connected
TV's screen.
1.
Internet radio service:You can listen to TuneIn or such
other Internet radio stations registered in advance.
DLNA :You can play music files stored in the PC or
NAS device connected to the network. Select the server
with the cursors, select the desired music file and press
ENTER to start playback.
AccuEQ Room Calibration: Disable the sound field
set in the automatic speaker setting. The setting can be
separately set to each input.
rꢀ This setting cannot be selected if the automatic
speaker setting has not been performed.
rꢀ It cannot be set if headphones are connected or the
listening mode is Pure Audio or Direct.
CBL/SAT
Input
BD DVD
CBL/SAT
STB DVR
GAME
PC
Audio
Video
Information
Listening Mode
Home Media:You can play music files in a shared folder
on the PC or NAS device connected to the network.
Select the server with the cursors, select the desired
music file and press ENTER to start playback.
AUX
Late Night: Make small sounds to be easily heard. It
is useful when you need to reduce the volume while
watching a movie late night.You can enjoy the effect on
Dolby Digital and Dolby Digital Plus only.
rꢀ Turning the unit to standby mode will set the setting
to "Off".
Select the item with the cursor buttons of the
remote controller and press ENTER to confirm your
selection.
2.
rꢀ "Network Service" becomes selectable after the network
starts up even if it cannot be selected first. It may take
about a minute to start up.
rꢀ To return to the previous screen, press RETURN.
rꢀ When "Network Service" is selected for the first time,
the "DISCLAIMER" screen will appear on the TV. Select
"Agree" if you agree the content. If you do not agree the
content, you cannot use the network service.
„
Input: Select the input and check the assignment of
input selector buttons.
rꢀ This function cannot be used if "Loudness
Management" is set to "Off".
¼ꢀ
You cannot use the function unless the TV is connected via HDMI
Music Optimizer: Improve the quality of the
compressed audio. Playback sound of lossy
compressed files such as MP3 will be improved. The
setting can be separately set to each input.
rꢀ The setting is effective in the signals of 48 kHz or less.
The setting is not effective in the bitstream signals.
rꢀ It cannot be set if the listening mode is Pure Audio or Direct.
„
Audio:You can perform various audio settings including
since selecting "Agree" in the "DISCLAIMER" screen is not possible.
rꢀ Layout of the icons in the "Network Service" top menu
can be changed. Press NET on the remote controller
and press D. Select the source icon with the cursors and
press ENTER, and then select the destination icon and
press ENTER. The positions of the icons are switched
each other.
audio quality and speaker level adjustment.
rꢀ You cannot select this item when audio is output from the
TV's speakers.
A/V Sync: If the video is behind the audio, you can
delay the audio to offset the gap. Different settings can
be set for each input.
rꢀ It cannot be set if the input is "NET", "USB" or
"BLUETOOTH".
rꢀ It cannot be set if the listening mode is Pure Audio or
Direct.
Re-EQ, Re-EQ (THX): Adjust the soundtrack that was
processed to enhance its high pitch range, in order to
make it suitable for home theater.
rꢀ In Re-EQ, the following listening modes can be used: Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, Multichannel,
DTS, DTS-HD High Resolution Audio, DTS-HD Master
Audio, DTS Express, DSD, and DTS Neo:X Cinema.
rꢀ In Re-EQ (THX), the following listening modes can
be used: THX Cinema, THX Surround EX, and THX
Select2 Cinema.
„
USB: Select "USB" in the TV screen and connect a
USB storage device to the USB port on the front panel. On
the TV screen, select the desired folder or music file with
the cursors of the remote controller and press ENTER to
confirm and start playback.
Bass,Treble: Adjust volume of the front speaker.
rꢀ It cannot be set if the listening mode is Pure Audio,
Direct or THX.
rꢀ "USB" becomes selectable after the USB function starts
up even if it cannot be selected first. It may take about a
minute to start up.
Phase Matching Bass: Suppress phase shift in the
midrange to enhance bass sound. Thus smooth and
powerful bass sound can be obtained.
rꢀ It cannot be set if the listening mode is Pure Audio,
Direct or THX.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Step 3: Playing Back
„
Screen Centered Dialog: Height speakers are used to
move acoustic images such as dialogs from the center
speakers upward according to the height of the TV
screen. Acoustic images of the center speakers move
up as the set value is increased.
rꢀ This item may not be available depending on the
selected listening mode.
rꢀ This function cannot be used if headphones are connected.
rꢀ This function cannot be used if "Height 1 Speakers
Type" is not set to "Front High".
rꢀ This function may not be effective depending on the
selected listening mode or input source.
Listening Mode: Select the listening mode from the
categories of "MOVIE/TV", "MUSIC", "GAME" and "THX".
rꢀ It cannot be set when audio is played from the TV's speakers.
„
Video:
Monitor Out: The video input signals input to the unit
will be converted by the unit when they are output from
the HDMI OUT jack to the TV so that their resolution can
match that of the TV used. Select the HDMI OUT jack to
be used for output.
Control Monitor: Select the main room TV or the
separate room TV for which the CEC link function is
enabled when HDMI connection between the unit and
the separate room TV is established by Zone function.
rꢀ For details on Zone function, see the next section
"Using the multi-zone function".
Speaker Layout:You can give priority to surround back
speakers, height 1/2 speakers or wide speakers when
they are all connected.
Back+Height 1: Audio outputs from surround back
speakers and Height 1 speakers are given priority.
Back+Wide: Audio outputs from surround back
speakers and wide speakers are given priority.
Height 1+2: Audio outputs from Height 1 speakers
and Height 2 speakers are given priority.
"Back" and "Height 1": Displayed when Zone 2
playback is performed via Height 2/ wide speaker terminals
(ZONE 2 terminals) while surround back and Height 1
speakers are connected. "Back" means that audio outputs
from surround back speakers are given priority.
"Height 1" means that audio outputs from Height 1
speakers are given priority.
"Back" and "Wide": Displayed when speakers are bi-
amp connected or Zone 3 playback is performed via
Height 1 speaker terminals (ZONE 3/Bi-AMP terminals)
while surround back and wide speakers are connected.
"Back" means that audio outputs from surround back
speakers are given priority. "Wide" means that audio
outputs from wide speakers are given priority.
"Back" and "Height 2": Displayed when speakers
are bi-amp connected or Zone 3 playback is
performed via Height 1 speaker terminals (ZONE 3/
Bi-AMP terminals) while surround back and Height
2 speakers are connected. "Back" means that audio
outputs from surround back speakers are given
priority. "Height 2" means that audio outputs from
Height 2 speakers are given priority.
Wide Mode:You can set the aspect ratio.
Picture Mode:You can adjust the image quality. "Cinema"
will automatically adjust the image to be suitable to watch
movie and "Game" suitable to play game. In "Standard",
the resolution will be changed but the image quality will
not be adjusted. In "Custom", "ISF Day" and "ISF Night",
you can adjust the brightness, contrast, hue and saturation
as desired. If you do not adjust the resolution and image
quality, select "Bypass".
rꢀ "Video" cannot be selected if the input is "NET", "USB" or
"BLUETOOTH".
„
Information:
Audio: Displays the audio input source, format, number of
channels, sampling frequency, listening mode, number of
output channels, and other audio information.
Video: Displays the video input source, resolution, signal
format, color tone, 3D information, Aspect, Picture Mode,
output, and other Video information.
Tuner: Displays the band, frequency, preset number, and
other tuner (radio) information.
rꢀ Selectable items vary depending on the playing conditions
such as input source, speaker configuration etc.
rꢀ The speakers cannot be selected if they have been
set to "None" in "Speaker Configuration".
rꢀ This function cannot be used if "11ch Playback" is set
to "Yes".
rꢀ This function cannot be used in the listening mode
which does not use surround back speakers, height
1/2 speakers or wide speakers.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Step 3: Playing Back
broadcasting. For Zone 3, any can be selected from among
an external device connected to the analog audio input
jacks ( ) of the unit, the "NET", "USB" or "BLUETOOTH"
Change the setting: Press RECEIVER and then HOME
on the remote controller, select "Setup" - "1.Input/Output
Assign" - "Monitor Out" - "Zone 2 Monitor Out" and set the
setting to "Use".
Using the multi-zone function
6
¼
source, and the AM/FM broadcasting.
The function allows you to connect the unit with a TV or
audio equipment placed in a separate room so that you can
enjoy audio and video of the connected equipment even if
you are staying in a different room. It is possible to perform
playback in the main room and a separate room at the same
time, for example by playing the Blu-ray Disc player in the
main room where the unit is placed while playing Internet
radio in a separate room. It is also possible to perform
playback only in a separate room. There are four methods to
configure multi-zone connection as described in "a" to "d" in
the right. Simultaneous playback in all zones is also possible.
¼
When you connect a CD player or such other player without HDMI
output jack, connect it to the analog audio input jacks of the unit.
Multi-zone output is not possible if the connection is only with digital
optical cable or digital coaxial cable. In case of analog connection,
analog audio output setting may be necessary on the player.
rꢀ You can view the information of the connected device on the
TV of Zone 2 by pressing DISPLAY during Zone 2 playback.
rꢀ As for HDMI input and analog audio input, it is possible
to play the same source or different sources in the main
room and separate room.
rꢀ As for the "NET", "USB" and "BLUETOOTH", you cannot
select different audio sources for the main room and
separate room. For example, if "NET" has been selected
in the main room and then "USB" is selected as playback
source in the separate room, the input in the main room
will change to "USB" accordingly.
„
b. Connecting a TV in a separate room using
composite video cable
Video from the player without HDMI out jack can be
displayed on the TV in a separate room. First, connect
the player to composite video input jack of the unit. Then,
connect the TV in the separate room to ZONE 2 OUT V
jack of the unit using a composite video cable.
rꢀ When listening to AM/FM broadcasting, you cannot
select different stations for the main room and separate
room. Therefore broadcasting of the same station will be
heard in the both rooms.
rꢀ If you play the same HDMI connected player for the main
room and a separate room, the sound field processing
for 2 ch PCM signals will be made in the main room.
Outputting Video/Audio to a Separate Room
„
a. Connecting a TV in a separate room using
HDMI cable
You can play video and audio of the HDMI connected
player on the TV in a separate room. With an HDMI cable,
connect between the HDMI OUT ZONE 2 jack of the unit
and the HDMI IN jack of the TV in a separate room.
Main room
Zone 2
rꢀ It is not possible to output video from the player to the
TV in the separate room if the player is connected to the
HDMI IN jack or COMPONENT VIDEO IN jack.
Zone 2
rꢀ In this connection method, audio from the player cannot be
output from the TV. To output audio in the separate room,
see the next section "Listening to Music in a Separate
Room" and connect the unit to the integrated amplifier or
speakers located in the room where the TV is placed.
Zone 3
z The sources from which you can enjoy the sound in
a separate room: For Zone 2, any can be selected from
among an external device connected to the HDMI input jack
¼
or the analog audio input jacks ( ) of the unit, the "NET",
"USB" or "BLUETOOTH" source, and the AM/FM
Zone 2
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Step 3: Playing Back
To turn off the multi-zone function: Press ZONE on the
remote controller repeatedly to select Zone 2 or Zone 3.
Listening to Music in a Separate Room
Press RECEIVER. To control on the main unit, press
ZONE2 or ZONE3 and within 8 seconds, press OFF.
z
„
c. Connecting an Integrated Amplifier in a
Separate Room
It is possible to play 2 ch source in a separate room while
9.2 ch source is being played in the main room. Connect
the PRE/LINE OUT ZONE 2 jacks or PRE/LINE OUT ZONE
3 jacks of the unit and the line-in jacks of the pre-main
amplifier in a separate room with an analog audio (RCA)
cable.
To adjust the volume: Press ZONE on the remote
controller a repeatedly to select Zone 2 or Zone 3. Adjust
the volume using VOL j l. To do this on the main unit,
/
press ZONE2 or ZONE3, and adjust the volume using the
MASTER VOLUME control within 8 seconds.
To temporally mute the audio: Press ZONE on the remote
controller repeatedly to select Zone 2 or Zone 3. Then,
press MUTING to mute the audio.
To adjust the sound quality for the separate room: Press
ZONE2 on the main unit. Press TONE a few times to display
"Bass", "Treble" or "Balance" on the display. When the
desired item appears on the display, adjust the value with +
or - button.
Zone 2
Zone 3
rꢀ If "Zone 2 Out" is set to "Fixed", sound quality adjustment
are not effective.
rꢀ If Zone 2 or Zone 3 is on, power consumption during
standby becomes larger than normal.
rꢀ If Zone 2 or Zone 3 is turned on when the listening mode
of the main room is Pure Audio, it will automatically
switch to Direct.
Required setting: Press RECEIVER and then HOME on
the remote controller. Select "Setup" - "2. Speaker Setup" -
"Speaker Settings" and set "Powered Zone 2" or "Powered
Zone 3" to "Yes".
rꢀ Volume adjustment can be performed only from the unit.
rꢀ While Zone 2 or Zone 3 is on, the RI linked system function
(interlink between Onkyo components) is disabled.
Zone 2
Zone 3
Performing Multi-zone Playback
rꢀ Volume can be adjusted with both the unit and the pre-
main amplifier used in a separate room. To adjust it with
the unit, press RECEIVER and then HOME on the remote
controller, select "Setup" - "7. Hardware Setup" - "Multi
Zone" - "Zone 2 Out" or "Zone 3 Out" and set the setting
to "Variable". If you connect a power amplifier, be sure to
make the setting and adjust the volume in the main room.
1. Press ZONE on the remote controller a repeatedly to
select Zone 2 or Zone 3. Point the remote controller
WHOLE HOUSE MODE: If you press WHOLE
HOUSE MODE while playback is being performed in
the main room, the WHOLE HOUSE MODE is turned
on, "Z2" and "Z3" on the display light at the same
time and the playback sources of all the rooms are
switched to the same source at once.
rꢀ WHOLE HOUSE MODE is effective only for playback
of the external player connected to the analog audio
input jacks.
at the unit and press RECEIVER.
z
"Z2" or "Z3" lights on the main unit display and Zone
function is enabled.
rꢀ The Zone button stays lit red when Zone 2 is selected
and green when Zone 3 is selected.
Press INPUT SELECTOR of the input source to be
played in a separate room.
2.
„
d. Connecting Speakers in a Separate Room
rꢀ This function cannot be used if headphones are
connected or audio is output from the speakers of
the TV.
If you turn the unit to standby during multi-zone playback,
the Z2/Z3 indicators are dimmed and the playback
mode is switched to playback in a separate room only.
Performing steps 1 and 2 while the unit is in standby also
switches the playback mode to playback in a separate
room only.
It is possible to directly connect the speakers in another
room without an amplifier. Connect the speakers in the
separate room to ZONE2 or ZONE3 speaker terminals
of the unit using speaker cables. Note that 7.2 ch will be
the maximum in the main room during Zone 2 or Zone 3
playback. When both Zone 2 and Zone 3 playbacks are
performed at the same time, 5.2 ch will be the maximum in
the main room.
To control on the main unit: Press ZONE2 or ZONE3 and
within 8 seconds, press the input selector button of the input to
be played in a separate room.To play the same source in the
main room and separate room, press ZONE2 or ZONE3 twice.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
1
2
3
456
7
8
9
F
(European model)
G
H
I
J
K
L
M
N
O
P Q
R
S T
U
V
W
X
Front Panel
DISPLAY button: Switches the information on the
display.
1
ON/STANDBY button: Turns the unit on or into
8 Display
K
z
standby mode.
9 MASTER VOLUME control and indicator: Allows you
QUICK SETUP button: Displays the Quick Setup menu.
HOME button: Displays the Home menu.
2 PURE AUDIO button and indicator: Switches to the
to adjust the volume.
L
M
N
HYBRID STANDBY indicator: Lights if the unit enters
standby mode when the HDMI Through, network
standby or Wakeup from Bluetooth function is enabled.
PHONES jack: Stereo headphones with a standard plug
are connected.
Pure Audio mode.
F
d c
Cursor buttons,TUNINGl j button, PRESET
3 Remote control sensor: Receives signals from the
remote controller.
4 BLUETOOTH indicator: Flashes while pairing with a
Bluetooth-enabled device is in progress and stays lit
when pairing is completed.
button and ENTER button: Moves the cursor and
confirms the selection. When listening to AM/FM
broadcasting, tune into the station with TUNINGl j or
d c
G
H
I
J
ZONE 2 button, ZONE 3 button and OFF button:
Controls the multi-zone function.
select the registered station with PRESET
.
RETURN button: Returns the display to the previous
Wi-Fi indicator: Stays lit while the unit is connected to
the wireless LAN router.
DOLBY ATMOS indicator: Stays lit when the Dolby
Atmos listening mode is selected with Height speakers
or surround back speakers enabled.
Input selector buttons: Switches the input to be
played.
5
O
TONE and Tone Level buttons: Adjusts the high tone
and low tone.
state.
6
MONITOR OUT button: Allows you to select the HDMI
jack to output the video input signals that are input to
the unit.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
18
DIMMER button (North American models): Switches
the brightness of the display.
P
1
2
3 4 5
6
7
RT/PTY/TP button (European model): Can be used
when receiving the station transmitting text information.
MEMORY button: Registers or deletes a station.
TUNING MODE button: Switches the tuning mode.
USB port: A USB storage device is connected so that
music files stored in it can be played.
LISTENING MODE buttons: Allows you to select the
listening mode.
AUX INPUT HDMI/MHL jacks: An HD video camera or
MHL-enabled mobile device is connected. It is possible
to send video and audio of an MHL-enabled mobile
device.
Q
R
S
T
U
8
9
F
G
Display
AUX INPUT AUDIO/VIDEO, DIGITAL jacks: A video
camera or such other device is connected.
WHOLE HOUSE MODE button: Controls the WHOLE
HOUSE MODE function to play the same source in all
the multi-zone connected rooms.
SETUP MIC jack: The supplied speaker setup
microphone is connected.
Front flap
Speaker/Channel display: Displays the output channel
that corresponds to the selected listening mode.
Z2/Z3: Lights when the output to Zone 2/Zone 3 is set to
on.
Lights according to the type of input digital signals and
the listening mode.
Bi AMP: Stays lit when "Front Speakers Type" is set to
"Bi-Amp".
1
2
3
8
V
Stays lit when headphones are connected.
Displays various information of the input signals.
Pressing DISPLAY displays the type of input digital
signals and the listening mode.
9
F
W
X
Displays the volume level.
Stays lit when Music Optimizer is enabled.
Lights when NET or USB is controlled.
NET: Stays lit when the "NET" input is selected and the
unit is connected to the home network (LAN). It will flash
if the connection is not correct.
4
5
6
G
USB: Stays lit when the "USB" input is selected and a
USB storage device (e.g. USB memory) is connected. It
will flash if the connection is not correct.
HDMI: Stays lit when HDMI signals are input and the
HDMI input is selected.
DIGITAL: Stays lit when digital signals are input and the
digital input is selected.
2.
1.
MUTING: Flashes when MUTING on the remote
controller is pressed and audio is temporarily muted.
ANALOG: Stays lit when analog signals are input and
the analog input is selected. Or, it stays lit when HDMI
and digital signal inputs are not assigned.
SLEEP: Stays lit when the sleep timer is set.
Tuning indicators
7
RDS (European model): Stays lit when RDS
broadcasting is being received.
AUTO: Stays lit when the tuning mode is auto.
c d
TUNED:
performed. When tuned into a radio station, the
"
flashes while tuning is automatically
c
d
|670'&| " on the display lights.
FM STEREO: Stays lit when an FM broadcasting is
being received.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
1
2
3
4
5
6
7
8 9
F
4
G
H
I
K L
M
N
O
P
J
Rear Panel
¼
RS232 port: Connected to the home control system. (
GND terminal: The ground wire of the turntable is
connected.
Composite video and analog audio jacks: Analog
video signals and audio signals are input.
PRE OUT jacks: A power amplifier or subwoofer with
built-in amplifier is connected.
)
DIGITAL IN COAXIAL/OPTICAL jacks: Digital audio
signals are input.
HDMI IN/OUT jacks: Digital video signals and audio
signals are transmitted between the unit and the
connected devices.
MONITOR OUT V jack: Video signals are output to the
connected monitor or TV.
COMPONENT VIDEO IN and OUT jacks: Component
video input/output jacks.
1
2
5
J
K
RI REMOTE CONTROL jack: An Onkyo product with RI
jack can be connected and synchronized with this unit.
ETHERNET port: Used for LAN connection
Wireless antenna: Used for Wi-Fi connection or when
using a Bluetooth-enabled device. Adjust their angles
according to the connection status.
6
7
8
9
F
L
M
N
3
4
ZONE 2 PRE/LINE OUT and ZONE 3 PRE/LINE OUT
jacks: Audio output jacks connected to the pre-main
amplifier for multi-zone playback in a separate room.
SPEAKERS terminals: Speakers are connected. To
use the Multi-zone function, connect the speakers in the
separate room to the ZONE2 speaker terminals.
BALANCE PRE OUT jacks: An amplifier with balance-
type XLR input jacks is connected.
ZONE 2 OUT V jack: Video signals of the player are
output to the connected TV in the separate room.
IR IN/OUT jack: Connected to the multiroom remote
¼
90°
180°
90°
control kit. (
)
O
P
12V TRIGGER OUT ZONE2/ZONE3 jack: Allows you
180°
to connect a device with trigger input jack in a separate
room to enable power link operation between the device
¼
and the unit. (
)
PC IN jack: PC is connected via an analog RGB cable.
AC INLET: The power cord is connected.
(/ꢃ#06'00#ꢃLCEMꢃꢅꢆꢇꢃŝꢁꢃCPFꢃ#/ꢃ#06'00#ꢃ
terminal: The supplied antennas are connected.
G
H
I
¼ꢀ
Special devices or cable connections are necessary to use the
control functions and . Contact the specialized stores for
,
9 F
J
more information.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Troubleshooting
„
HDMI control does not function correctly.
rꢀ Set the CEC link function of the unit to on. It is also
necessary to make the HDMI linked system setting on
the TV. See the TV's instruction manual for details.
Resetting the unit
Before starting the procedure
Problems may be solved by simply turning the power
on/off or disconnecting/connecting the power cord,
which is easier than working on the connection,
setting and operating procedure. Try the simple
measures on both the unit and the connected
device. If the problem is that the video or audio is not
output or the HDMI linked operation does not work,
disconnecting/connecting the HDMI cable may solve
it. When reconnecting, be careful not to wind the
HDMI cable since if wound the HDMI cable may not fit
well. After reconnecting, turn off and on the unit and
the connected device.
Resetting the unit to the status at the time of shipment may
solve the problem. If the measures above do not solve the
problem, reset the unit with the following procedure. If you
reset the unit status, your preferences will be reset to the
defaults. Note them down before starting reset.
The remote controller does not work.
rꢀ Be sure to press RECEIVER first before operating the
unit with the remote controller.
z How to reset:
While holding down CBL/SAT on the main unit (note
that step 2 must be performed with this button
pressed down)
1.
2.
There is no sound for multi-zone function.
Press ON/STANDBY on the main unit ("Clear"
z
rꢀ When you connect a CD player or such other player
without HDMI output jack, connect it to the analog audio
input jacks of the unit. Multi-zone output is not possible if
the connection is only with digital optical cable or digital
coaxial cable. In case of analog connection, analog audio
output setting may be necessary on the player.
appears on the display and the unit returns to standby)
The AV receiver turns off unexpectedly.
rꢀ The AV receiver will automatically enter standby mode
when Auto Standby is set and launched.
C l e a r
There’s no sound, or it’s very quiet.
Cannot access to network.
rꢀ A wrong input selector button has been selected. Select
a correct input for the player. Also check that muting is
not on.
rꢀ Try plugging/unplugging the unit or the wireless LAN
router or check their power-on status. This will work well
in many cases.
rꢀ If the desired wireless LAN router is not in the access
point list, it may be set to hide SSID or the ANY
connection may be off. Change the setting and try again.
rꢀ Not all listening modes use all speakers.
Press ON/STANDBY
While holding down
1.
CBL/SAT,
2.
z
There’s no picture.
z How to reset the remote controller:
rꢀ A wrong input selector button has been selected.
rꢀ Video is not displayed if the listening mode is Pure Audio.
rꢀ To display video from the connected player on the TV
screen while the unit is in standby, you need to enable
HDMI Through function.
rꢀ When the TV image is blurry or unclear, power cord or
connection cables of the unit may have interfered. In
that case, keep distance between TV antenna cable and
cables of the unit.
Bluetooth
While holding down RECEIVER on the remote
controller, press HOME (about 3 seconds) until
RECEIVER lights.
1.
rꢀ Try plugging/unplugging the unit and the Bluetooth-
enabled player. After that, check that the Bluetooth
function is enabled on the Bluetooth-enabled device and
the connection with the unit has been established.
Within 30 seconds, press RECEIVER again.
2.
TUNER
MODE
NET
USB
BLUETOOTH
REMOTE MODE
TV
RECEIVER
MUTING
RECEIVER
rꢀ If you connect a player supporting HDCP2.2, be sure to
connect it to the HDMI IN3 jack of the unit. At the time,
connect the TV to the HDMI OUT MAIN jack.
CH
DISC
TV
VOL
VOL
ALBUM
INPUT
TOP MENU
MENU
GUIDE
PREV CH
PLAYLIST
PLAYLIST
ENTER
Q
SETUP
RETURN
HOME
HOME
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Specifications
Audio Format
Dolby Atmos, DTS-HD Master Audio, DTS-HD High Resolution Audio,
Dolby TrueHD, Dolby Digital Plus, DSD, Multichannel PCM
Supported
Amplifier Section
Rated Output Power
Network Section
Ethernet LAN
All channels: 135 watts minimum continuous power per channel, 8
ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum
total harmonic distortion of 0.08% (FTC)
10BASE-T/100BASE-TX
Wireless LAN
3D, Audio Return Channel, DeepColor, x.v.Color, LipSync, CEC (RIHD),
4K (Upscaling and Passthrough)
IEEE 802.11 b/g/n standard
(North American)
(Wi-Fi® standard)
9 ch × 185 W at 6 ohms, 1 kHz, 1 ch driven of 1% (IEC) (Others)
Maximum Effective Output Power
2.4 GHz band: 1 - 11 ch (North American)
10 - 11 ch (Spain)
z Video Inputs
Component
IN1 (BD/DVD), IN2 (CBL/SAT)
Composite
IN1 (CBL/SAT), IN2 (STB/DVR), IN3 (GAME), AUX INPUT (front)
Analog RGB inputs
PC IN
9 ch × 230 W at 6 ohms, 1 kHz, 1 ch driven (JEITA) (Asian)
10 - 13 ch (France)
Dynamic Power (
)
1 - 13 ch (Others)
¼
IEC60268-Short-term maximum output power
ꢌꢏꢏꢀ9ꢀꢄꢌꢀŝꢐꢀ(TQPVꢆ
(Wi-Fi® standard)
¼ꢀ
ꢀ
ꢀ
ꢀ
ꢇꢅꢏꢀ9ꢀꢄꢊꢀŝꢐꢀ(TQPVꢆ
Bluetooth Section
Communication system
ꢁꢅꢏꢀ9ꢀꢄꢎꢀŝꢐꢀ(TQPVꢆ
THD+N (Total Harmonic Distortion+Noise)
0.08% (20 Hz - 20 kHz, half power)
Damping Factor
Bluetooth Specification version 2.1 +EDR (Enhanced Data Rate)
Maximum communication range
z Video Outputs
Component
MONITOR OUT
Composite
ꢀ
ꢂꢏꢀꢄ(TQPVꢐꢀꢁꢀM*\ꢐꢀꢎꢀŝꢆ
Line of sight approx. 15 m (
)
¼
Input Sensitivity and Impedance (Unbalance)
Frequency band
2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method
ꢀ
ꢀ
ꢇꢏꢏꢀO8ꢋꢊꢈꢀMŝꢀꢄ.+0'ꢆ
ꢇꢃꢅꢀO8ꢋꢊꢈꢀMŝꢀꢄ2*101ꢀ//ꢆ
MONITOR OUT, ZONE2 OUT
Rated RCA Output Level and Impedance
FHSS (Freq Hopping Spread Spectrum)
Compatible Bluetooth profiles
ꢀ
ꢇꢏꢏꢀO8ꢋꢊꢈꢏꢀŝꢀꢄ24'ꢀ176ꢆ
Maximum RCA Output Level and Impedance
ꢊꢃꢂꢀ8ꢋꢊꢈꢏꢀŝꢀꢄ24'ꢀ176ꢆ
Rated XLR Output Level and Impedance
ꢊꢏꢏꢀO8ꢋꢊꢈꢏꢀŝꢀꢄ24'ꢀ176ꢆ
Maximum XLR Output Level and Impedance
ꢑꢃꢇꢀ8ꢋꢊꢈꢏꢀŝꢀꢄ24'ꢀ176ꢆ
Phono Overload
z Audio Inputs
A2DP 1.2 (Advanced Audio Distribution Profile)
AVRCP 1.3 (Audio Video Remote Control Profile)
Supported Codecs
ꢀ
Digital
OPTICAL 1 (GAME), 2 (TV/CD), AUX INPUT DIGITAL (front)
ꢀ
COAXIAL 1 (BD/DVD), 2 (CBL/SAT), 3 (STB/DVR)
Analog
SBC
Transmission range (A2DP)
ꢀ
BD/DVD, CBL/SAT, STB/DVR, GAME, PC, TV/CD, PHONO, AUX INPUT
(front)
20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)
¼ꢀ
The actual range will vary depending on factors such as obstacles
70 mV (MM 1 kHz 0.5% Direct)
between devices, magnetic fields around a microwave oven, static
electricity, cordless phone, reception sensitivity, antenna’s performance,
operating system, software application, etc.
Frequency Response
z Audio Outputs
Analog
5 Hz - 100 kHz/+1 dB, –3 dB (Direct mode)
Tone Control Characteristics
10 dB, 50 Hz (BASS)
PRE/LINE OUT ZONE2, ZONE3
Balance Pre Outputs
PREOUT FRONT L, FRONT R
Analog Multichannel Pre Outputs
FRONT L/R, CENTER, SURROUND L/R, BACK L/R, HEIGHT 1 L/R,
HEIGHT 2 or WIDE L/R, SW1 x 2, SW2 x 2
Speaker Outputs
10 dB, 20 kHz (TREBLE)
Signal to Noise Ratio
General
Power Supply
AC 120 V, 60 Hz (North American)
AC 220 - 240 V, 50/60 Hz (Others)
Power Consumption
110 dB (LINE, IHF-A)
80 dB (PHONO MM, IHF-A)
Speaker Impedance
ꢀ
ꢊꢀŝꢀꢒꢀꢁꢂꢀŝꢀQTꢀꢂꢀŝꢀꢒꢀꢁꢂꢀŝ
FRONT L/R, CENTER, SURR L/R, BACK L/R, HEIGHT 1 (or ZONE3 or
Bi-AMP) L/R, HEIGHT 2/WIDE (or ZONE2) L/R
Phones
9.6 A (North American)
955 W (Others)
0.1 W (Stand-by, North American)
0.12 W (Stand-by, Others)
125 W (No-sound)
Video Section
Input Sensitivity/Output Level and Impedance
PHONES (Front, ø 6.3)
ꢀ
ꢀ
ꢀ
ꢁꢀ8RꢒRꢋꢈꢅꢀŝꢀꢄ%QORQPGPVꢀ;ꢆ
ꢏꢃꢈꢀ8RꢒRꢋꢈꢅꢀŝꢀꢄ%QORQPGPVꢀ2B/CB, PR/CR)
ꢁꢀ8RꢒRꢋꢈꢅꢀŝꢀꢄ%QORQUKVGꢆ
Dimensions (W × H × D)
435 mm × 199 mm × 466.5 mm
17-1/8" × 7-13/16" × 18-3/8"
Weight
z Others
Setup Mic 1 (Front)
RS232 1
Ethernet 1
IR IN 1/OUT 1
12V TRIGGER OUT 2 (ZONE2/ZONE3)
Component Video Frequency Response
5 Hz - 100 MHz/+0 dB, –3 dB
20.5 kg (45.2 lbs.)
Tuner Section
z HDMI
Input
USB 1 (Front)
RI 1
FM Tuning Frequency Range
87.5 MHz - 107.9 MHz (North American)
87.5 MHz - 108.0 MHz, RDS (Others)
AM Tuning Frequency Range
522/530 kHz - 1611/1710 kHz
Preset Channel
IN1 (BD/DVD), IN2 (CBL/SAT), IN3 (STB/DVR, HDCP2.2), IN4 (GAME),
IN5 (PC), IN6, IN7, AUX INPUT (HDMI/MHL) (front)
Output
OUT MAIN (ARC, HDCP2.2), OUT SUB, OUT ZONE2
Video Resolution
Specifications and features are subject to change without notice.
40
Pass through: 4K 60Hz (YCbCr 4:2:0)
Upscaling: 4K 30Hz
Download from Www.Somanuals.com. All Manuals Search And Download.
22
License and Trademark Information
DISCLAIMER
Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos,
Dolby Surround, Surround EX and the double-D symbol are trademarks of
Dolby Laboratories.
Through this device you are able to link to other services or websites which
are not under the control of any company which has designed, manufactured
or distributed/have distributed this device, and its affiliates (collectively,
“Company”). We have no control over the nature, content and availability
of those services. The inclusion of any links does not necessarily imply a
recommendation or endorse the views expressed within them.
All information, content and services available through this device belong to
third parties and are protected by copyright, patent, trademark and/or other
intellectual property laws of applicable countries.
The information, content and services provided through this device are for your
personal, noncommercial use only. Any information, content or services may
not be used in any manner other than previously approved by the appropriate
content owner or service provider.
You may not modify, copy, republish, translate, exploit, create derivative works,
upload, post, transmit, sell or distribute in any manner any information, content
or services available through this device, unless expressly permitted by the
appropriate copyright, patent, trademark and/or other intellectual property
owner, including, without limitation, content owner or service provider.
THE CONTENT AND SERVICES AVAILABLE THROUGH THIS DEVICE ARE
PROVIDED “AS IS”.
COMPANY DOES NOT WARRANT INFORMATION, CONTENT OR
SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY
PURPOSE.
The Wi-Fi CERTIFIED® Logo is a certification mark of the Wi-Fi Alliance.
Wi-Fi certified® logo shows international association certifying interoperability
“Wi-Fi alliance” ensures the product has passed the test for compatibility with
other Wi-Fi certified equipment.
DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS-HD Master Audio and DTS Neo:X
| 11.1 are trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Onkyo is under license.
Other trademarks and trade names are those of their respective owners.
Onkyo does not guarantee Bluetooth compatibility between the AV receiver and
all Bluetooth-enabled devices.
For compatibility between the AV receiver and another device with Bluetooth
technology, consult the device’s documentation and dealer. In some countries,
there may be restrictions on using Bluetooth devices. Check with your local
authorities.
Qdeo and QuietVideo are trademarks of Marvell or its affiliates.
Re-Equalization and the “Re-EQ” logo are trademarks of THX Ltd.
COMPANY EXPRESSLY DISCLAIMS ANY WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF
TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
Company makes no representation or warranty of any kind, express or implied,
about the completeness, accuracy, validity, legality, reliability, suitability or
availability with respect to the information, content or services available through
this device. Company shall not be liable, whether in contract or tort, including
negligence and strict liability, for any direct, indirect, special, incidental or
consequential damages or any other damages arising out of, or in connection
with, any information contained in, or as a result of the use of any content or
service by you or any third party, even if Company has been advised of the
possibility of such damages, nor shall Company be liable for any third party
claims against users of this device or any third party.
In no event shall Company be responsible nor liable for, without limiting the
generality of the foregoing, any interruption or suspension of any information,
content or service available through this device. Company is neither responsible
nor liable for customer service related to the information, content and services
available through this device. Any question or request for service relating to
the information, content or services should be made directly to the appropriate
content owners and services providers.
“MHL, the MHL Logo, and Mobile High-Definition Link are trademarks or
registered trademarks of MHL LLC in the United States and other counties.”
Manufactured under license from THX Ltd. THX and the THX logo are
registered in the U.S. and other jurisdictions. All rights reserved. Surround EX is
a trademark of Dolby Laboratories. Used with permission.
U.S. Pat. nos. 7,254,239 & 7,593,533 & 7,974,425 & 8,452,028 & 8,509,457
Taiwan Pat. I238671 European Pat. 1,360,874
InstaPrevue and the InstaPrevue logo are trademarks or registered trademarks
of Silicon Image, Inc. in the United States and other countries.
Apple, iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and
other countries.
Apple TV is a trademark of Apple Inc., registered in the U.S. and other
countries.
THX Select2 Plus
Before any home theater component can be THX Select2 Plus certified, it
must pass a rigorous series of quality and performance tests. Only then can
a product feature the THX Select2 Plus logo, which is your guarantee that
the Home Theater products you purchase will give you superb performance
for many years to come. THX Select2 Plus requirements define hundreds of
parameters, including power amplifier performance, and pre-amplifier
performance and operation for both digital and analog domains. THX Select2
Plus receivers also feature
SIRIUS, XM and all related marks and logos are trademarks of Sirius XM Radio
Inc. and its subsidiaries. All rights reserved.
DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks, service
marks, or certification marks of the Digital Living Network Alliance.
proprietary THX technologies (e.g., THX Mode) which accurately translate
movie soundtracks for home theater
playback.
This product is protected by certain intellectual property rights of Microsoft. Use
or distribution of such technology outside of this product is prohibited without a
license from Microsoft.
AccuEQ, Music Optimizer, RIHD and WRAT are trademarks of Onkyo
Corporation.
“RIHD” and “RIHD (logo)” are trademarks of Onkyo Corporation.
Windows and the Windows logo are trademarks of the Microsoft group of
companies.
QR Code is a registered trademark of DENSO WAVE INCORPORATED.
®
Safari is a trademark or registered trademark of Apple Computer, Inc. in the
United States.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
“x.v.Color” is a trademark of Sony Corporation.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and
Thomson.
“Xantech” is a registered trademark of Xantech Corporation.
“Niles” is a registered trademark of Niles Audio Corporation.
“All other trademarks are the property of their respective owners.”
Download from Www.Somanuals.com. All Manuals Search And Download.
23
–
–
–
–
–
Käesolevaga kinnitab Onkyo Corporation seadme TX-NR1030 vastavust
direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele
teistele asjakohastele sätetele.
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Ο ΚΑΤΑΣΚΕΥΑΣΤΗΣ Onkyo Corporation ΔΗΛΩΝΕΙ
ΟΤΙ TX-NR1030 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ
ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ
Por la presente, Onkyo Corporation, declara que este TX-NR1030 cumple
con los requisitos esenciales y otras exigencias relevantes de la Directiva
1999/5/EC.
Par la présente, Onkyo Corporation déclare que l’appareil TX-NR1030 est
conforme aux exigences essentielles et aux autres dispositions pertinentes
de la directive 1999/5/CE.
Con la presente Onkyo Corporation dichiara che questo TX-NR1030 è
conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite
dalla direttiva 1999/5/CE.
#TꢀwQꢀ1PM[Qꢀ%QTRQTCVKQPꢀFGMNCTðꢐꢀMCꢀ6:ꢒ04ꢁꢏꢌꢏꢀCVDKNUVꢀ&KTGMVĈXCUꢀꢁꢑꢑꢑꢋꢅꢋ
'-ꢀDĿVKUMCLÞOꢀRTCUĈDÞOꢀWPꢀEKVKGOꢀCTꢀVQꢀUCKUVĈVCLKGOꢀPQVGKMWOKGOꢃ
Šiuo Onkyo Corporation deklaruoja, kad šis TX-NR1030 atitinka esminius
reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
A Onkyo Corporation ezzennel kijelenti, hogy a TX-NR1030 típusú beren-
FG\ÅUꢀVGNLGUÉVKꢀC\ꢀCNCRXGVĩꢀMÒXGVGNOÅP[GMGVꢀÅUꢀO½Uꢀꢁꢑꢑꢑꢋꢅꢋ'-ꢀKT½P[GNXDGPꢀ
OGIJCV½TQ\QVVꢀXQPCVMQ\ÏꢀTGPFGNMG\ÅUGMGVꢃ
Hierbij verklaart Onkyo Corporation dat het toestel l TX-NR1030 in
overeenstemming is met de essentiële eisen en de andere relevante
bepalingen van richtlijn 1999/5/EG.
0KPKGLU\[Oꢀ1PM[Qꢀ%QTRQTCVKQPꢀFGMNCTWLGꢀŏGꢀ6:ꢒ04ꢁꢏꢌꢏꢀLGUVꢀ\IQFP[ꢀ
\ꢀ\CUCFPKE\[OKꢀY[OCICPKCOKꢀKꢀKPP[OKꢀYĜCıEKY[OKꢀRQUVCPQYKGPKCOKꢀ
Dyrektywy 1999/5/EC.
–
2TKPꢀRTG\GPVCꢐꢀ1PM[Qꢀ%QTRQTCVKQPꢐꢀFGENCTàꢀEàꢀCRCTCVWNꢀ6:ꢒ04ꢁꢏꢌꢏꢀGUVGꢀ
ÊPꢀEQPHQTOKVCVGꢀEWꢀEGTKPķGNGꢀGUGPķKCNGꢀĵKꢀEWꢀCNVGꢀRTGXGFGTKꢀRGTVKPGPVGꢀCNGꢀ
Directivei 1999/5/CE.
1PM[Qꢀ%QTRQTCVKQPꢀVÙOVQꢀX[JNCUWLGꢐꢀzGꢀ6:ꢒ04ꢁꢏꢌꢏꢀCꢀURĔĢCꢀ\½MNCFPÅꢀ
RQzKCFCXM[ꢀCꢀXwGVM[ꢀRTÉUNWwPÅꢀWUVCPQXGPKCꢀ5OGTPKEGꢀꢁꢑꢑꢑꢋꢅꢋ'5ꢃ
Onkyo Corporation izjavlja, da je ta TX-NR1030 v skladu z bistvenimi
\CJVGXCOKꢀKPꢀFTWIKOKꢀTGNGXCPVPKOKꢀFQNQêKNKꢀFKTGMVKXGꢀꢁꢑꢑꢑꢋꢅꢋ'5ꢃ
Onkyo Corporation vakuuttaa täten että TX-NR1030 tyyppinen laite on
direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin
muiden ehtojen mukainen.
*ÀTOGFꢀHÒTMNCTCTꢀ1PM[Qꢀ%QTRQTCVKQPꢀCVVꢀFGPPCꢀ6:ꢒ04ꢁꢏꢌꢏꢀHÒNLGTꢀFGꢀ
väsentliga kraven och andra relevanta stadgar i Direktiv 1999/5/EC.
Hér með lýsir Onkyo Corporation því yfir að varan TX-NR1030 er í
UCOTÂOKꢀXKÌꢀITWPPMTÒHWTꢀQIꢀCÌTCTꢀMTÒHWTꢀUGOꢀIGTÌCTꢀGTWꢀÉꢀVKNUMKRWPꢀꢁꢑꢑꢑꢋꢅꢋ
EC.
Onkyo Corporation erklærer herved at denne TX-NR1030 er i
overensstemmelse med vesentlige krav og andre relevante bestemmelser i
direktiv 1999/5/EC.
Precautions
–
–
–
For European Models
Declaration of Conformity
We declare, under our sole responsibility, that
this product complies with the standards:
–
–
Safety
Limits and methods of measurement of
radio disturbance characteristics
–
–
–
–
Limits for harmonic current emissions
Limitation of voltage changes, voltage
fluctuations and flicker
–
–
RoHS Directive, 2011/65/EU
–
–
–
–
–
Hereby, Onkyo Corporation, declares that
this TX-NR1030 is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
1XKOGꢀ1PM[Qꢀ%QTRQTCVKQPꢐꢀRQVXTîWLGꢀFCꢀLGꢀ6:ꢒ04ꢁꢏꢌꢏꢀWꢀUWINCUPQUVKꢀUCꢀ
osnovnim zahtjevima i ostalim relevantnim odredbama Direktive 1999/5/EC.
–ꢀ µꢀÑÄÕÖÒãÝÉÖÒꢁꢀ2QN\Rꢀ&RUSRUDWLRQꢁꢀÈÉÎÏÄÔÌÔÄꢁꢀÛÉꢀ7;ꢂ15ꢃꢄꢅꢄꢀÉꢀÆꢀ
ÕÞÒÖÆÉÖÕÖÆÌÉꢀÕÞÕꢀÕÞÝÉÕÖÆÉÑÌÖÉꢀÌËÌÕÎÆÄÑÌãꢀÌꢀÈÔ×ÇÌÖÉÓÔÌÏÒÊÌÐÌꢀ
ÔÄËÓÒÔÉÈÅÌꢀÑÄꢀ¨ÌÔÉÎÖÌÆÄꢀꢃꢆꢆꢆꢇꢈꢇ(&ꢉ
–
1PM[Qꢀ%QTRQTCVKQPꢀVÉOVQꢀRTQJNCwWLGꢐꢀzGꢀ6:ꢒ04ꢁꢏꢌꢏꢀURNĢWLGꢀ\½MNCFPÉꢀ
RQzCFCXM[ꢀCꢀXwGEJPCꢀRįÉUNWwP½ꢀWUVCPQXGPKꢀ5OøTPKEGꢀꢁꢑꢑꢑꢋꢅꢋ'5ꢃ
Undertegnede Onkyo Corporation erklærer herved, at følgende udstyr TX-
NR1030 overholder de væsentlige krav og øvrige relevante krav i direktiv
1999/5/EF.
Hiermit erklärt Onkyo Corporation, dass sich das Gerät TX-NR1030 in
Übereinstimmung mit den grundlegenden Anforderungen und den übrigen
einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
–
–
–
–
–
Eu, Onkyo Corporation, declaro que o TX-NR1030 cumpre os requisitos
essenciais e outras provisões relevantes da Directiva 1999/5/EC.
Europe
(Mainland)
Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku,
OSAKA 541-0041, JAPAN
1301, 555 Tower, No.555 West NanJing Road, Jing’an District,
Shanghai, China 200041,
Tel: 86-21-52131366 Fax: 86-21-52130396
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
Tel: +49-8142-4401-0 Fax: +49-8142-4208-213
The Americas
Asia, Oceania, Middle East, Africa
Please contact an Onkyo distributor referring to Onkyo
SUPPORT site.
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
For Dealer, Service, Order and all other Business Inquiries:
Tel: 201-785-2600 Fax: 201-785-2650
Meridien House, Ground floor, 69 - 71 Clarendon Road,
Watford, Hertfordshire, WD17 1DS, United Kingdom
Tel: +44 (0)8712-00-19-96 Fax: +44 (0)8712-00-19-95
China
The above-mentioned information is subject to change
without prior notice.
Visit the Onkyo web site for the latest update.
(Hong Kong)
For Product Support Team Only:
1-800-229-1687
Unit 1033, 10/F, Star House, No 3, Salisbury Road,
Tsim Sha Tsui Kowloon, Hong Kong.
Tel: 852-2429-3118 Fax: 852-2428-9039
D1406-0
SN 29401673
(C) Copyright 2014 Onkyo Corporation Japan. All rights reserved.
* 2 9 4 0 1 6 7 3 *
Download from Www.Somanuals.com. All Manuals Search And Download.
Si un autre type de borne est utilisé pour la connexion,
réglez le volume sur l'équipement audio placé dans une
pièce séparée.
Afin de profiter de la musique Spotify dans la pièce
principale après la lecture de Spotify dans une pièce
UÅRCTÅGꢀꢁUÅNGEVKQPPG\ꢁ‡|0'6|—|ꢁEQOOGꢁGPVTÅGꢁFGꢁNCꢁ
pièce principale.
Support for Spotify Connect
Supporto per Spotify Connect
„ꢀ
„ꢀ
Spotify Connect can be supported by updating the unit's
firmware. Simply click the Connect icon and select the unit
on the playback screen of Spotify application to enjoy high
quality music streaming. To enable Spotify Connect, install
the Spotify application on your smartphone or tablet first.
Then, create a Spotify premium account.
Spotify Connect può essere supportato tramite
l’aggiornamento del firmware dell’unità. È sufficiente
cliccare sull’icona Connect e selezionare l’unità sulla
schermata di riproduzione dell’applicazione Spotify per
fruire di streaming di musica ad alta qualità. Per abilitare
Spotify Connect, installare anzitutto l’applicazione Spotify
sul proprio smartphone o tablet. Quindi, creare un account
premium Spotify.
•
Mise sous tension automatique
The Spotify software is subject to third party licenses found here:
¼ꢀ
La mise en veille du réseau vous permet d'utiliser la
fonction de mise sous tension automatique lors de
l'utilisation de l'application Spotify.
•
Il software Spotify è soggetto a licenze di terze parti presenti all’indirizzo:
¼ꢀ
Notes for using multi-zone function
To enjoy Spotify music in a separate room, select "NET"
as the input of the separate room.
•
Note per l’utilizzo della funzione multi-zona
Volume adjustment with the Spotify application is
possible only for the equipment connected to the
ZONE2/3 speaker terminals (compatible model only).
If any other terminal is used for connection, adjust the
volume on the audio equipment placed in a separate
room.
To enjoy Spotify music in the main room after playing
Spotify in a separate room, select "NET" as the input of
the main room.
Compatibilidad con Spotify Connect
Per fruire di musica Spotify in una stanza separata,
selezionare “NET” come ingresso della stanza separata.
La regolazione del volume con l’applicazione Spotify è
possibile solo per l’apparecchiatura collegata ai terminali
dell’altoparlante ZONE2/3 (solo modello compatibile).
Se viene utilizzato qualsiasi altro terminale per il
collegamento, regolare il volume sull’apparecchiatura
audio posizionata in una stanza separata.
Per fruire di musica Spotify nella stanza principale
dopo aver riprodotto Spotify in una stanza separata,
selezionare “NET” come ingresso della stanza
principale.
•
„ꢀ
•
•
Spotify Connect será compatible mediante la actualización
del firmware de la unidad. Simplemente haga clic en
el icono Connect y seleccione la unidad en la pantalla
de reproducción de la aplicación Spotify para disfrutar
de transmisión de música de alta calidad. Para habilitar
Spotify Connect, instale primeramente la aplicación Spotify
en su teléfono inteligente o tableta. A continuación, cree
una cuenta Spotify premium.
•
•
El software de Spotify está protegido por licencias de terceros que
Auto Power On
¼ꢀ
encontrará en:
Turning network standby on allows you to use the Auto
Power On function when using the Spotify application.
•
Accensione automatica
Notas sobre el uso de función multizona
L’attivazione dello standby di rete consente di utilizzare
la funzione di accensione automatica quando si utilizza
l’applicazione Spotify.
•
Para disfrutar de la música de Spotify en otra habitación,
seleccione “NET” como la entrada de dicha habitación.
Con la aplicación Spotify podrá ajustar el volumen
solamente del equipo conectado a los terminales del
altavoz ZONE2/3 (únicamente modelos compatibles).
Si usa cualquier otro terminal para la conexión, ajuste
el volumen en el equipo de audio ubicado en dicha
habitación independiente.
•
Support pour Spotify Connect
„ꢀ
•
Spotify Connect peut être pris en charge par la mise à
jour du logiciel de l'unité. Cliquez simplement sur l'icône
Connect et sélectionnez l'unité sur l'écran de lecture de
l'application Spotify pour profiter de la diffusion audio
de haute qualité. Pour activer Spotify Connect, installez
l'application Spotify sur votre smartphone ou tablette en
premier. Puis, créez un compte premium Spotify.
Para disfrutar de la música de Spotify en la habitación
•
principal después de reproducirla en otra habitación
Spotify, seleccione “NET” como la entrada de la
habitación principal.
Le logiciel Spotify est soumis à des licences de tiers que vous trouverez ici :
¼ꢀ
Remarques concernant la fonction multizone
Activación automática
Pour profiter de la musique Spotify dans une pièce
UÅRCTÅGꢀꢁUÅNGEVKQPPG\ꢁ‡|0'6|—|EQOOGꢁGPVTÅGꢁFGꢁNCꢁ
pièce séparée.
Le réglage du volume avec l'application Spotify n'est
possible que pour l'équipement connecté aux bornes
d'enceintes ZONE2/3 (modèle compatible seulement).
•
Activar el modo de espera de red le permite usar la
función de activación automática al utilizar la aplicación
Spotify.
•
D1410-0
•
SN 29402014
(C) Copyright 2014 Onkyo Corporation Japan. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
Unterstützung für Spotify Connect
„ꢀ
Opmerkingen voor gebruik van de multi-zonefunctie
Automatiskt strömpåslag
Om te genieten van muziek van Spotify in een aparte
ruimte, selecteert u „NET” als de invoer van de aparte
ruimte.
Genom att slå på nätverks-standby kan du använda
funktionen för automatiskt strömpåslag när du använder
Spotify-applikationen.
•
•
Spotify Connect kann durch Aktualisierung der Firmware
des Geräts unterstützt werden. Klicken Sie einfach auf
das Symbol Connect und wählen Sie das Gerät auf
dem Wiedergabe-Bildschirm der Anwendung Spotify,
um hochqualitatives Musik-Streaming zu genießen. Zur
Aktivierung von Spotify Connect, installieren Sie die
Anwendung Spotify zuerst auf Ihrem Smartphone oder
Tablet. Erstellen Sie dann einen Spotify Premium-Account.
Volumeregeling met de Spotify-toepassing is alleen
•
mogelijk voor de apparatuur verbonden met de
ZONE2/3-luidsprekeraansluitingen (alleen compatibel
model). Als een andere aansluiting wordt gebruikt
voor de verbinding, regel het volume dan op de
audioapparatuur in een aparte ruimte.
Spotify Connect -tuki
„ꢀ
Spotify Connect voidaan tukea päivittämällä laitteen
ohjelmisto. Napsauta Connect-kuvaketta ja valitse
laite Spotify-sovelluksen toistonäytössä nauttiaksesi
korkealaatuisesta musiikin suoratoistosta. Ota
Spotify Connect käyttöön asentamalla Spotify-sovellus
ensin älypuhelimeesi tai tablettiisi. Luo sitten Spotify
Premium -tili.
Die Software Spotify benötigt Lizenzen dritter Parteien, die Sie hier finden:
¼ꢀ
Om te genieten van muziek van Spotify in de
•
hoofdruimte na het afspelen van Spotify in een
aparte ruimte, selecteert u „NET” als de invoer van de
hoofdruimte.
Hinweise zur Verwendung der Multizonenfunktion
Zum Genuss von Spotify Musik in einem anderen Raum,
wählen Sie „NET“ als Eingang für den anderen Raum aus.
•
Spotify-ohjelmistoon sovelletaan kolmannen osapuolen lisenssejä, jotka
¼ꢀ
löytyvät täältä:
Automatisch Inschakelen Aan
Lautstärken-Einstellung mit der Anwendung
•
Als u het netwerk in stand-by zet, kunt u de functie
Automatisch Inschakelen Aan gebruiken wanneer u de
Spotify-toepassing gebruikt.
•
Spotify ist nur für Ausrüstung möglich, die mit den
Lautsprecheranschlüssen ZONE2/3 verbunden ist (nur
kompatibles Modell). Wird für die Verbindung ein anderer
Anschluss verwendet, passen Sie die Lautstärke an
der Audio-Ausrüstung an, die in einem anderen Raum
platziert ist.
Huomautuksia monivyöhyketoiminnon käytöstä
Nauti Spotify-musiikista erillisessä huoneessa
valitsemalla erillisen huoneen tulolähteeksi ”NET”.
Äänenvoimakkuuden säätö Spotify-sovelluksella
•
Stöd för Spotify Connect
„ꢀ
•
on mahdollista vain laitteella, joka on kytketty
ZONE2/3-kaiutinliitäntään (vain yhteensopiva malli). Jos
jotain muuta kaiutinpäätettä käytetään kytkemisessä,
säädä äänenvoimakkuutta äänentoistolaitteesta joka
sijaitsee erillisessä huoneessa.
Kun haluat nauttia Spotify-musiikista päähuoneessa
sen jälkeen kun Spotify-musiikkia on toistettu erillisessä
huoneessa, valitse ”NET” tulolähteeksi päähuoneessa.
Zum Genuss von Spotify Musik im Hauptraum nach dem
Abspielen von Spotify in einem anderen Raum, wählen
Sie „NET“ als Eingang für den Hauptraum aus.
•
Spotify Connect stöds genom att uppdatera enhetens
firmware. Klicka på Connect-ikonen och välj enheten
på Spotify-applikationens uppspelningsskärm för
att njuta av högkvalitativ musik-streaming. För att
aktivera Spotify Connect, måste du först installera
Spotify-applikationen på din smartphone eller surfplatta.
Skapa sedan ett Spotify-premiumkonto.
Auto Power Ein
•
Einschalten von Netzwerk-Standby ermöglicht Ihnen die
Verwendung der Auto Power Ein-Funktion, wenn Sie die
Anwendung Spotify verwenden.
•
Spotify-programvaran omfattas av tredjepartslicenser som kan hittas här:
¼ꢀ
Automaattinen virta päälle -toiminto
Kytkemällä verkon valmiustilan päälle voit käyttää
automaattista virta päälle -toimintoa, kun käytät
Spotify-sovellusta.
•
Ondersteuning voor Spotify Connect
Anmärkningar för användning av
multizonsfunktionen
„ꢀ
Spotify Connect kan worden ondersteund door de
firmware van het toestel bij te werken. Klik simpelweg op
het pictogram Connect en selecteer het toestel op het
weergavescherm van de Spotify-toepassing om te genieten
van hoogwaardige muziekstreaming. Om Spotify Connect
in te schakelen, installeert u eerst de Spotify-toepassing op
uw smartphone of tablet. Maak vervolgens een premium
account voor Spotify.
För att uppleva Spotify-musik i ett annat rum, välj ”NET”
som inmatning för det andra rummet.
•
Justering av volymen för Spotify-applikationen är
•
endast möjlig för utrustningen som är ansluten till
ZONE2/3-högtalarkontakterna (endast kompatibla
modeller). Om någon annan kontakt används för
anslutningen, justera volymen på ljudutrustningen i det
andra rummet.
De software van Spotify is onderworpen aan licenties van derde partijen
¼ꢀ
die u hier terugvindt:
För att uppleva Spotify-musik i huvudrummet efter att
du har spelat Spotify i ett annat rum, välj ”NET” som
ingångskälla för huvudrummet.
•
Download from Www.Somanuals.com. All Manuals Search And Download.
|