Contents
Super Audio CD &
DVD Audio/Video Player
Overview ..............................................2
DV-SP504/
Connections ......................................18
Getting Started and Setting up ........27
Basic Playback ..................................28
DV-SP504E
Instruction Manual
Thank you for purchasing the Onkyo DV-SP504/
DV-SP504E Super Audio CD & DVD Audio/
Video player. Read this manual carefully before
using your new DVD player. A good understand-
ing of its features and operation will allow you to
achieve optimum performance and enjoyment.
Playback Techniques ........................34
Detailed Settings...............................43
Keep this manual for future reference.
Miscellaneous information...............55
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
1. Recording Copyright—Unless it’s for personal use
only, recording copyrighted material is illegal with-
out the permission of the copyright holder.
• Do not expose this unit to direct sunlight or heat
sources, because its internal temperature may
rise, shortening the life of the optical pickup.
• Avoid damp and dusty places, and places subject
to vibrations from loudspeakers. Never put the
unit on top of, or directly above a loudspeaker.
• Install this unit horizontally. Never use it on its
side or on a sloping surface, because it may cause
a malfunction.
• If you install this unit near a TV, radio, or VCR,
the picture and sound quality may be affected. If
this occurs, move this unit away from the TV,
radio, or VCR.
2. AC Fuse—The AC fuse inside the unit is not user-
serviceable. If you cannot turn on the unit, contact
your Onkyo dealer.
3. Care—Occasionally you should dust the unit all
over with a soft cloth. For stubborn stains, use a soft
cloth dampened with a weak solution of mild deter-
gent and water. Dry the unit immediately afterwards
with a clean cloth. Don’t use abrasive cloths, thin-
ners, alcohol, or other chemical solvents, because
they may damage the finish or remove the panel let-
tering.
8. To Obtain a Clear Picture—This unit is a high-
tech, precision device. If the lens on the optical
pickup, or the disc drive mechanism becomes dirty
or worn, the picture quality may be affected. To
maintain the best picture quality, we recommend
regular inspection and maintenance (cleaning or
worn part replacement) every 1,000 hours of use
depending on the operating environment. Contact
your Onkyo dealer for details.
4. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE
FIRST TIME, READ THE FOLLOWING SEC-
TION CAREFULLY.
AC outlet voltages vary from country to country.
Make sure that the voltage in your area meets the
voltage requirements printed on the unit’s rear panel
(e.g., AC 230 V, 50 Hz or AC 120 V, 60 Hz).
9. Moisture Condensation
The power cord plug is used to disconnect this unit
from the AC power source. Make sure that the plug
is readily operable (easily accessible) at all times.
Moisture condensation may damage this unit.
Read the following carefully:
Moisture may condense on the lens of the optical
pickup, one of the most important parts inside this
unit.
• Moisture condensation can occur in the following
situations:
Pressing the [STANDBY/ON] button to select
Standby mode does not fully shutdown the unit. If
you do not intend to use the unit for an extended
period, remove the power cord from the AC outlet.
– The unit is moved from a cold place to a warm
place.
– A heater is turned on, or cold air from an air
conditioner is hitting the unit.
5. Never Touch this Unit with Wet Hands—Never
handle this unit or its power cord while your hands
are wet or damp. If water or any other liquid gets
inside this unit, have it checked by your Onkyo
dealer.
– In the summer, when this unit is moved from an
air conditioned room to a hot and humid place.
– The unit is used in a humid place.
• Do not use this unit when there’s the possibility
of moisture condensation occurring. Doing so
may damage your discs and certain parts inside
this unit.
If condensation does occur, remove all discs and
leave this unit turned on for two to three hours. By
this time, the unit will have warmed up and any con-
densation will have evaporated.
6. Handling Notes
• If you need to transport this unit, use the original
packaging to pack it how it was when you origi-
nally bought it.
• Do not leave rubber or plastic items on this unit
for a long time, because they may leave marks on
the case.
• This unit’s top and rear panels may get warm
after prolonged use. This is normal.
• If you do not use this unit for a long time, it may
not work properly the next time you turn it on, so
be sure to use it occasionally.
• When you’ve finished using this unit, remove all
discs and turn off the power.
7. Installing this Unit
• Install this unit in a well-ventilated location.
• Ensure that there’s adequate ventilation all
around this unit, especially if it’s installed in an
audio rack. If the ventilation is inadequate, the
unit may overheat, leading to malfunction.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions—Continued
10. Region Numbers—The DVD standard uses region
numbers to control how discs can be played around
the world, the world being divided into six regions.
This unit will only play DVD discs that match its
region number, which can be found on its rear panel
For U.S. models
FCC Information for User
CAUTION:
The user changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
ALL
1
,
(e.g.,
).
11. About this Manual—This manual explains how to
use all of this unit’s functions. Although the DVD
standard offers many special features, not all discs
use them all, so depending on the disc being played,
this unit may not respond to certain functions. See
the disc’s sleeve notes for supported features.
NOTE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interfer-
ence in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful inter-
ference to radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
This unit contains a semiconductor laser system and is
classified as a “CLASS 1 LASER PRODUCT”. So, to
use this model properly, read this Instruction Manual
carefully. In case of any trouble, please contact the store
where you purchased the unit.
To prevent being exposed to the laser beam, do not try
to open the enclosure.
CAUTION:
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
CLASS 1M VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. DO NOT VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS.
•
•
Connect the equipment into an outlet on a circuit dif-
ferent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV tech-
nician for help.
THIS PRODUCT UTILIZES A LASER. USE OF
CONTROLS OR ADJUSTMENTS OR PERFOR-
MANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARD-
OUS RADIATION EXPOSURE.
The label on the right is
applied on the rear panel.
For European Models
1. This unit is a CLASS 1
Declaration of Conformity
LASER PRODUCT and
We,
ONKYO EUROPE
employs a laser inside the cabinet.
2. To prevent the laser from being exposed, do not remove the
cover. Refer servicing to qualified personnel.
ELECTRONICS GmbH
LIEGNITZERSTRASSE 6,
82194 GROEBENZELL,
GERMANY
declare in own responsibility, that the ONKYO product
described in this instruction manual is in compliance with the
corresponding
technical standards such as EN60065,
EN55013, EN55020 and EN61000-3-2, -3-3.
GROEBENZELL, GERMANY
K. MIYAGI
ONKYO EUROPE ELECTRONICS GmbH
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplied Accessories
Precautions—Continued
Make sure you have the following accessories:
For Canadian Models
NOTE: THIS CLASS B DIGITAL APPARATUS
COMPLIES WITH CANADIAN ICES-003.
For models having a power cord with a polarized plug:
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
RC-657DV
Modèle pour les Canadien
Remote controller & 2 batteries (AA/R6)
REMARQUE: CET APPAREIL NUMÉRIQUE DE
LA CLASSE B EST CONFORME À LA NORME
NMB-003 DU CANADA.
Sur les modèles dont la fiche est polarisée:
ATTENTION: POUR ÉVITER LES CHOCS ÉLEC-
TRIQUES, INTRODUIRE LA LAME LA PLUS
LARGE DE LA FICHE DANS LA BORNE CORRE-
SPONDANTE DE LA PRISE ET POUSSER
JUSQU’AU FOND.
AV cable (RCA) (1.5 m)
Coaxial cable (1.0 m)
For British models
Replacement and mounting of an AC plug on the power
supply cord of this unit should be performed only by
qualified service personnel.
cable (0.8 m)
This cable is used to connect the DVD player to other
-compatible Onkyo components for
Interactive) control.
IMPORTANT
The wires in the mains lead are coloured in accordance
with the following code:
(Remote
Blue:
Neutral
To use
, in addition to an
connection, you must
Brown: Live
make an analog audio connection (RCA) between the
DVD player and your Onkyo AV receiver.
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured mark-
ings identifying the terminals in your plug, proceed as
follows:
The wire which is coloured blue must be connected to
the terminal which is marked with the letter N or
coloured black.
The wire which is coloured brown must be connected to
the terminal which is marked with the letter L or
coloured red.
Power cord (1.8 m, 2 m for Australian model)
IMPORTANT
The plug is fitted with an appropriate fuse. If the fuse
needs to be replaced, the replacement fuse must
approved by ASTA or BSI to BS1362 and have the same
ampere rating as that indicated on the plug. Check for
the ASTA mark or the BSI mark on the body of the fuse.
If the power cord’s plug is not suitable for your socket
outlets, cut it off and fit a suitable plug. Fit a suitable
fuse in the plug.
Power-plug adapter
Only supplied in certain countries. Use this adapter if
your AC outlet does not match with the plug on the DVD
player’s power cord. (Adapter varies from country to
country.)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Features
*1 Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are trademarks
of Dolby Laboratories.
Highlights
*1
*2
• Dolby Digital, DTS
• DVD-Video, Video CD, audio CD
*2 “DTS” and “DTS Digital Surround” are registered trademarks
of Digital Theater Systems, Inc.
*3
®*4
• MP3, WMA, JPEG, DivX
(not North Amer-
*3 Windows Media, and the Win-
dows logo are trademarks, or
registered trademarks of
Microsoft Corporation in the
United States and/or other coun-
tries.
ican model)
• DVD-Audio and Super Audio CD
• CD-R/RW, DVD-R/RW, and DVD+R/RW com-
patible
*5
• HDMI digital interface
*4 DivX, DivX Certified, and asso-
ciated logos are trademarks of
DivX, Inc. and are used under
license.
• 5.1-channel analog audio output
Video
• Advanced 108 MHz/14-bit video D/A converter
• Component, S-Video, and composite video outputs
• Repeat/A-B Repeat/Random/Memory playback
• Supports 4:3 and 16:9 aspect ratio TVs
• Parental Lock function
*5 HDMI, the HDMI logo and
High-Definition Multimedia Interface are trademarks or regis-
tered trademarks of HDMI licensing LLC.
*6 VLSC and the VLSC logo are registered trademarks of Onkyo
Corporation.
• Screen Saver function
Audio
• 192 kHz/24-bit D/A converter
• Optical / Coaxial digital output
*6
• VLSC (Vector Linear Shaping Circuitry) on all
channels
• Dynamic Range Control setting
Others
• Adjustable display brightness
• Full-function remote controller
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Overview
Using the Remote Controller.........................11
Front & Rear Panels .........................................12
Front Panel....................................................12
Display ..........................................................13
Last Memory..................................................39
Zooming.........................................................40
Selecting Camera Angles..............................40
Selecting Soundtracks...................................41
Audio Output/Audio Setting Matrix................19
Basic Setup...................................................20
Connecting to an AV Receiver......................22
Using the Onscreen Setup Menus.................45
Picture Menu .................................................46
Audio Menu ...................................................48
Language Menu.............................................50
Connecting your HDTV or AV receiver
with an HDMI Input.....................................24
Using the Multiroom Control Kits
(North American model only)......................25
Connecting the Power/Turning
Adjusting the Display Brightness...................55
DVD-Video regions........................................55
Disc Content Organization.............................55
Glossary ............................................................56
Troubleshooting.................................................58
Specifications ....................................................62
Getting Started and Setting up
Forward Frame-by-Frame Playback .............30
Slow-motion Playback...................................30
Navigating DVD & VCD Disc Menus.............31
Navigating CDs & Super Audio CDs.............31
Navigating MP3, WMA, and DivX Discs........32
Viewing a Slideshow of JPEG Images..........33
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction—Continued
• The DVD player does not support disc types not listed.
• The DVD player supports 8 cm and 12 cm discs.
• Don’t use discs with an unusual shape, such as those
shown below, because you may damage the DVD
player.
Disc Notes
Supported Discs
The DVD player supports the following discs.
Disc
Logo
Format or file type
*1
DVD-Video
DVD-Audio
DVD-Audio
• Don’t use discs that have residue from adhesive tape,
rental discs with peeling labels, or discs with custom-
made labels or stickers. Doing so may damage the
DVD player and you may not be able to remove the
disc properly.
Super Audio
CD
Super Audio CD (single
layer, dual layer, hybrid)
DVD-Video, MP3, WMA,
JPEG
*2
DVD-R
About playing copy-controlled CDs
Some copy-controlled CDs may not conform to official
CD standards. They are special discs and may not play
on the DVD player.
*3
DVD-Video, VR format ,
MP3, WMA, JPEG
*2
DVD-RW
Function Support
Video CD
Including PBC
The following icons are used throughout this manual to
indicate which functions can be used with the various
disc formats and file types.
*4
PCM
Audio CD
Icon
Disc format or file type
Audio CD, MP3, WMA,
JPEG, DivX
*2
CD-R
DVD-V
DVD-Video
DVD-A
SACD
VCD
CD
DVD-Audio
Super Audio CD
Video CD
Audio CD, MP3, WMA,
JPEG
*2
CD-RW
JPEG CD
JPEG
– DVD+R/RW –
The DVD player supports DVD+R/RW discs
recorded in the following formats:
Audio CD
• Discs recorded in DVD-Video mode.
• Discs recorded in ISO 9660 Level 2 or Joliet for-
mat containing MP3, WMA, or JPEG files.
MP3
WMA
JPEG
DivX
MP3 file
WMA file
*1 The DVD player’s region number is printed on the rear panel.
If you attempt to play a disc intended for another region, the
message appears onscreen.
JPEG file
®
DivX (not North American model)
*2 MP3, WMA, and JPEG files are supported on discs recorded in
ISO 9660 Level 2 or Joliet format. (See “MP3/WMA/JPEG
Compatibility” on page 9 for more details.) However, some
CD-R, CD-RW, DVD-R, and DVD-RW discs may not work
properly for any of the following reasons: incomplete disc
finalization, disc burner characteristics, disc characteristics, the
disc is damaged or dirty, the disc contains only a small amount
of data. Discs that contain different types of files, JPEG, MP3,
WMA, DivX, and so on, are not supported. See the manual sup-
plied with your disc burner for more information. Condensa-
tion or dirt on the optical pickup lens can also affect playback.
*3 The DVD player does not support DVD-VR discs that use
CPRM (Content Protection for Recordable Media).
About this Manual
This manual explains how to use all of the DVD player’s
functions. Although the DVD standard offers many spe-
cial features, not all discs use them all, so depending on
the disc being played, the DVD player may not respond
to certain functions. See your disc’s sleeve notes for sup-
ported features.
When you attempt to use a DVD feature that is
not available, this logo may appear onscreen,
indicating that the feature is not supported by
the current disc or by the DVD player.
*4 Some audio CDs feature copy protection that doesn’t conform
to the official CD standard. Since these are nonstandard discs,
they may not play properly in the DVD player.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction—Continued
MP3/WMA/JPEG Compatibility
About DivX
• The DVD player can play/display MP3, WMA, and
JPEG files recorded on CD-R, CD-RW, DVD-R,
DVD-RW, DVD+R and DVD+RW discs.
• Discs must be in ISO 9660 Level 2 or Joliet format
(folders can be up to eight levels deep). Music files
recorded on discs that use the HFS (hierarchical file
system) cannot be played.
DivX is a compressed digital video format created by the
DivX® video codec from DivXNetworks, Inc. This
player can play DivX video files burned on CD-R discs.
When naming files on a disc prior to burning, keep in
mind that by default they will be played in alphabetical
order.
Note:
• Discs must be finalized.
• North American models do not support DivX Video.
• The DVD player can only recognize the first session
on multisession discs.
DivX video compatibility
• You can determine the order in which the DVD player
plays/displays your MP3/WMA songs and JPEG pic-
tures by prefixing file and folder names with a three-
digit number. For example 001.Root, 002.Folder, and
so on, and 001.Track.mp3, 002.Track.mp3, and so on.
• Only the first eight characters of folder and track names
(excluding the filename extension) are displayed.
• The folder numbered “001” appears as “ROOT” in the
Disc Navigator.
• The DVD player supports up to 255 folders and up to
255 files per folder.
• If you try to play an incompatible file, the message
“This format cannot be played” appears on the display.
®
• Official DivX Certified product.
®
®
®
®
• Plays DivX 5, DivX 4, DivX 3 and DivX VOD
video content (in compliance with DivX Certified
technical requirements).
DivX disc compatibility with this player is limited as
®
®
follows:
CD-R
Playable discs
CD-RW not recommended
File system
ISO9660 Level 1, 2, or Joliet
A file name should be in alphabet
and numerals only, and must incor-
porate “AVI” extension.
■ MP3
File name
• MP3 files must be MPEG1Audio Layer 3 format, 44.1
or 48 kHz, fixed bit-rate.
e.g. “*****.AVI”
• MP3 files must have a “.mp3” or “.MP3” filename
extension.
• Variable bit-rates (VBR) from 32 kbps to 320 kbps are
supported. (Playing times may display incorrectly
with VBR.)
Total number of
folders
Less than 255
Less than 255
Total number of
files
■ WMA
• WMA files must have the copyright option turned off.
• Sampling rates 44.1/48 kHz are supported.
• Variable bit-rates (VBR) from 48 kbps to 192 kbps
(44.1 kHz) and 128 kbps to 192 kbps (48 kHz) are sup-
ported. (Playing times may display incorrectly with
VBR.)
• WMA files must have a “.wma” or “.WMA” filename
extension.
■ JPEG
• JPEG files must have a “.jpg” or “.JPG” filename
extension.
• JPEG files must be less than 5 megabytes in size.
• JPEG files up to 5,700 x 3,800 pixels are supported.
About WMA
WMA is an acronym for Windows Media Audio and
refers to an audio compression technology developed by
Microsoft Corporation. WMA content can be encoded
®
by using Windows Media Player version 7/7.1 or 8.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction—Continued
Handling Discs
Copyright
• Never touch the underside of a disc.Always hold discs
by the edge, as shown.
It is forbidden by law to copy, broadcast, show, broadcast
on cable, play in public, or rent copyrighted material
without permission.
DVD-Video discs are copy-protected, and any record-
ings made from these discs will be distorted.
This product incorporates copyright protection technol-
ogy that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use
of this copyright-protection technology must be autho-
rized by Macrovision Corporation, and is intended for
home and other limited viewing uses only, unless other-
wise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Underside
• Never attach adhesive tape or sticky labels to discs.
Cleaning Discs
• For best results, keep your discs clean. Fingerprints
and dust can affect the sound and picture quality and
should be removed as follows. Using a clean soft
cloth, wipe from the center outwards, as shown. Never
wipe in a circular direction.
✔
• To remove stubborn dust or dirt, wipe the disc with a
damp soft cloth, and then dry it with a dry cloth.
• Never use solvent-based cleaning fluids, such as thin-
ner or benzine, commercially available cleaners, or
antistatic sprays intended for vinyl records, because
they may damage the disc.
Storing Discs
• Don’t store discs in places subject to direct sunlight, or
near heat sources.
• Don’t store discs in places subject to moisture or dust,
such as in a bathroom or near a humidifier.
• Always store discs in their cases and vertically. Stack-
ing, or putting objects on unprotected discs may cause
warping, scratches, or other damage.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using the DVD player
Installing the Batteries
Using the Remote Controller
To use the remote controller, point it at the DVD player’s
remote control sensor, as shown below.
Open the battery compartment, as shown.
1
Remote control sensor
DVD player
30˚
30˚
Insert the two supplied batteries (AA/R6)
in accordance with the polarity diagram
inside the battery compartment.
2
Notes:
• The remote controller may not work reliably if the
DVD player is subjected to bright light, such as direct
sunlight or inverter-type fluorescent lights. Keep this
in mind when installing the DVD player.
• If another remote controller of the same type is used in
the same room, or the DVD player is installed close to
equipment that uses infrared rays, the remote control-
ler may not work reliably.
Close the battery compartment.
3
• Don’t put anything, such as a book, on the remote con-
troller, because the buttons may be pressed inadvert-
ently, thereby draining the batteries.
• The remote controller may not work reliably if the
DVD player is installed in a rack behind colored glass
doors. Keep this in mind when installing the DVD
player.
• The remote controller will not work if there’s an obsta-
cle between it and the DVD player’s remote control
sensor.
Notes:
• If the remote controller doesn’t work reliably, try
replacing both batteries.
• Don’t mix new and old batteries, or different types of
batteries.
• If you intend not to use the remote controller for a long
time, remove the batteries to prevent possible leakage
and corrosion.
• Flat batteries should be removed as soon as possible to
prevent possible leakage and corrosion.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Front & Rear Panels
For detailed information, refer to the pages in brackets.
Front Panel
1 2
3 4 5
6
7 8 9 J K L M
TOP MENU
RETURN
MENU
SETUP
O
S R Q
P O N
A STANDBY/ON button [26]
This button is used to set the DVD player to On or
Standby.
J
K
L
M
(open/close) button [28]
This button is used to open and close the disc tray.
(pause) button [28, 30]
This button is used to pause playback.
B STANDBY indicator [26]
This indicator lights up when the DVD player is in
Standby.
(stop) button [29]
This button is used to stop playback.
C RESOLUTION button [43]
(play) button [28]
This button is used to start playback.
This button is used to select the video resolution for
the HDMI output, and select progressive or inter-
laced scanning.
N Previous/Next
/
buttons [29]
chapter or track. During playback it selects the
beginning of the current track.
The Next button is used to select the next chapter or
track.
D HDMI button [43]
This button is used to turn HDMI on or off.
E HDMI indicator [43]
This indicator lights up when a HDMI signal is
being output.
O SETUP button [45]
F Disc tray [28]
This button is used to open and close the onscreen
setup menus.
Discs are loaded here.
G TOP MENU button [31, 33]
P RETURN button
With DVD discs, this button displays the main
menu. With a JPEG disc, it displays thumbnails of
the images. With a Video CD, it turns PBC on or off.
This button is used to exit the onscreen setup.
Q Remote control sensor [11]
This sensor receives control signals from the remote
controller.
H Cursor
/
/
/
& ENTER buttons [45]
The four cursor buttons located around the central
menus and the onscreen setup menus.
The central [ENTER] button is used to start play-
back of the selected title, chapter, or track and to
confirm settings.
R DISPLAY button [42]
This button is used to display information about the
title, chapter, or track, including the elapsed time,
remaining time, total time, and so on. Press it
repeatedly to display more information.
S DIMMER button [55]
I MENU button [31, 33]
This button is used to adjust the display brightness.
This button is used to display a menu on a DVD or
to open the Disc Navigator when using a JPEG disc.
normal
dim
dimmer
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Front & Rear Panels—Continued
Display
1
2
4 5678 9 0 A B C
3
DE F GH
I
9RANDOM indicator
1
D PRO LOGIC indicator
This indicator appears when using the Random
function.
The
D indicator appears when playing Dolby
Digital material. The PRO LOGIC indicator appears
when the DVD player’s Dolby Pro Logic decoder is
on.
0REMAIN indicator
This indicator appears while the remaining time is
being displayed.
2Disc type indicators
These indicators show the type of disc loaded.
ARepeat
indicator
3TITLE indicator
This indicator appears when A-B playback or repeat
playback is used.
While stopped, the total number of titles on the cur-
rent DVD-Video disc is displayed here. During
playback, the number of the current title is dis-
played.
BA-B indicator
These indicators appear when using the A-B Repeat
function.
4GROUP indicator
CCamera angle
indicator
While stopped, the total number of groups on the
current DVD-Audio disc is displayed here. During
playback, the number of the current group is dis-
played.
This indicator appears if the DVD-Video disc being
played features multiple camera angles.
DPROGRESSIVE indicator
This indicator appears when progressive video is
being output by the component video output.
5TRACK indicator
This indicator appears while track numbers are
being displayed. While stopped, the total number of
tracks on the current SACD, Video CD, audio CD,
or MP3/WMA disc are displayed. During playback,
the number of the current track is displayed.
EDTS indicator
This indicator appears when playing DTS material.
FPlay
indicator
This indicator is shown during playback.
65.1 CH indicator
GPause
indicator
This indicator appears when playing 5.1-channel
material.
This indicator appears when playback is paused.
HMP3 indicator
7CHP indicator
This indicator appears when playing an MP3 disc.
This indicator appears while the number of the cur-
rent chapter is being displayed.
IMessage & time area
Time information, such as total time, remaining
time, and so on, is displayed here in hours, minutes,
and seconds. Other messages are also displayed.
8D.MIX indicator
During multichannel audio playback, indicates that
the output signal has been down mixed from the
original audio source. This is an automatic function
performed by the player in order to present the most
appropriate audio mix to the speakers present in
your system.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Front & Rear Panels—Continued
A AUDIO OUTPUT [20, 22, 23]
This coaxial digital audio output can be connected
to a coaxial digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS) with supplied coaxial cable.
These jacks make up the multichannel analog audio
output. The FRONT/D.MIX jacks can be connected
to a stereo input on a TV, hi-fi amp, or other compo-
nent. The 1 and 2 jacks output the same signals, so
use either pair. If you use this connection, in the
Speaker Configuration (page 48), set the Sub-
woofer, Center Speaker, and Surround Speaker set-
tings to Off, so that 5.1-channel DVD audio is down
mixed into two channels.
If you’re using an AV receiver or surround decoder
with a 5.1-channel analog audio input, use the
FRONT/D.MIX 1 or 2 jacks and the SURR 1 L/R,
CENTER, and SUBWOOFER jacks.
If you’re using an AV receiver or surround decoder
SURR 2 L/R jacks to your amp’s surround back L/R
jacks, and set the SURR MODE switch to “1+2.”
The SURR 1 and SURR 2 jacks output the same
signals.
J AC INLET [26]
The supplied power cord is connected here. The
other of the power cord should be connected to a
suitable wall outlet.
This switch is used to turn the AUDIO OUTPUT
SURR 2 on or off. To use this output, set the switch
to “1+2.” The SURR 2 jacks output the same signals
as the SURR 1 jacks.
L HDMI OUT [24]
This HDMI output can be used to connect a TV or
projector with an HDMI input. This HDMI connec-
tor outputs digital audio and digital video.
M AV CONNECTOR (European model only) [21]
This SCART output can be connected to a TV or
projector with a SCART input. This SCART con-
nector outputs 2-channel stereo audio (same signals
as the FRONT/D.MIX jacks), composite video,
S-Video, and RGB video.
B
jack [23]
These (Remote Interactive) connectors can be
connected to the connectors on your other
Onkyo AV components for interactive control.
Connecting an cable only does not make the
system operational.You must also connect the audio
cables as well.
C RS 232 (North American model only)
This port is for servicing.
D IR IN/OUT (North American model only) [25]
A commercially available IR receiver can be con-
nected to the IR IN jack, allowing you to control the
installed in a cabinet.
A commercially available IR emitter can be con-
remote control signals along to other components.
E S VIDEO OUTPUT [21]
This connector can be used to connect a TV or pro-
jector with an S-Video input.
F VIDEO OUTPUT [20]
This RCA connector can be used to connect a TV or
projector with a composite video input.
G COMPONENT VIDEO OUTPUT [21]
These jacks output component video and can be
connected to an component video input on a TV or
projector.
H OPTICAL DIGITAL AUDIO OUTPUT [22]
This optical digital audio output can be connected to
an optical digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Front & Rear Panels—Continued
Remote Controller
A STANDBY button [26]
This button is used to set the DVD player to
Standby.
B ON button [26]
1
2
This button is used to turn on the DVD player.
Don’t turn on the DVD player until you’ve com-
pleted, and double checked all connections
(pages 20–25).
N
C Number buttons [34, 35, 53]
These buttons are used to enter title, chapter, and
track numbers and to enter times for locating spe-
cific points in time.
O
P
Q
3
D AUDIO button [41]
soundtracks and audio formats (e.g., Dolby Digital
or DTS) on DVD-Video discs.
channel, mix, or stereo.
R
S
T
U
V
W
4
5
6
E SUBTITLE button [41]
This button is used to select subtitles on
DVD-Video discs.
F RANDOM button [37]
7
8
This button is used with the Random function.
X
Y
G SLOW
These buttons are used for slow-motion playback.
H Previous/Next buttons [29]
/
buttons [30]
/
9
J
The Previous button is used to select the previous
beginning of the current track.
Z
The Next button is used to select the next chapter or
track.
I Fast Reverse/Fast Forward
/
buttons
a
b
K
L
[30]
These buttons are used for fast reverse and fast for-
ward.
M
c
J Cursor
/
/
/
buttons [45]
These buttons are used to navigate onscreen menus.
K MENU button [31, 33]
This button is used to display a menu on a DVD or
to open the Disc Navigator when using a JPEG disc.
L TOP MENU button [31, 33]
With DVD discs, this button displays the main
menu. With a JPEG disc, it displays thumbnails of
the images. With a Video CD, it turns PBC on or off.
M ASPECT/ZOOM button [40, 46]
This button is used to change the view mode. Press-
ing and holding it for a few seconds selects Zoom
mode.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
N OPEN/CLOSE
button [28]
This button is used to open and close the disc tray.
O SEARCH button [34, 35]
This button is used to search for titles, chapters,
groups, folders, tracks, and specific points in time.
P MEMORY button [38]
This button is used with the Memory function.
Q REPEAT button [36]
This button is used to set the Repeat function.
R A-B button [36]
This button is used to set the A-B Repeat function.
S CLR button [34, 35, 39]
This button is used to cancel various functions.
T DISPLAY button [42]
This button is used to display information about the
title, chapter, or track, including the elapsed time,
repeatedly to display more information.
U ANGLE button [40]
This button is used to select camera angles on
DVD-Video discs.
V LAST MEMORY button [39]
This button is used with the Last Memory function.
W Pause
button [28, 30]
This button is used to pause playback. While play-
back is paused, pressing this button moves the video
forward one frame at a time.
X Play
button [28]
This button is used to start playback.
Y Stop button [29]
This button is used to stop playback.
Z ENTER button [45]
This button is used to start playback of the selected
title, chapter, or track, and to confirm settings.
a RETURN button
This button is used to exit the onscreen setup.
b SETUP button [45]
This button is used to open and close the onscreen
setup menus.
c RESOLUTION button [43]
This button is used to select a video resolution for
the HDMI OUT.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the DVD player
AV Cables & Connectors
Video
Cable
Jack
Description
HDMI connections can carry uncompressed, stan-
dard or high definition digital video and digital
audio, for the best picture and sound quality.
HDMI
Component video separates the luminance (Y) and
color difference signals (PR, PB), providing the best
picture quality. Some TV manufacturers label their
component video inputs differently.
Y
P
P
Y
Component
video
/
/
B
R
C
B
P
P
B
R
CB
/ CR
/ CR
S-Video provides better picture quality than com-
posite video.
S-Video
S VIDEO
VIDEO
Composite
video
(supplied)
Composite video can be found on virtually all TVs,
VCRs, and video equipment.
SCART connections carry analog audio and video
(composite, S-Video, RGB) all in one cable.
Scart
(European
model only)
AV CONNECTOR
Audio
Cable
Jack
Description
Optical digital audio connections provide better
audio quality than analog connections.
Optical digital
OPTICAL
COAXIAL
Coaxial digital audio connections provide better
audio quality than analog connections.
Coaxialdigital
(supplied)
RCA analog audio connectors can be found on vir-
tually all AV components.
L
Analog
(supplied)
R
This cable carries multichannel analog audio and
it’s typically used to connect DVD players with
individual 5.1 channel analog audio outputs. Sev-
eral standard analog audio cables can be used
instead of a multichannel cable.
FRONT/D. MIX
SURR1
CENTER
Multichannel
analog audio
cable (RCA)
1
2
SUB
WOOFER
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the DVD player—Continued
Video Output/Video Setting Matrix
The following matrix shows how the video outputs work in relation to the various video settings.
HDMI Output Setting (page 27)
Setting
On (default)
Off
Progressive Setting (page 43)
HD Resolution setting (page 43)
480p/576p
(default)
Video output
Auto
720p, 1080i
Progressive
No output
Interlaced
*3
HDMI
No output
✓
✓
✓
*1
*2
*2
Component
S-Video
No output
✓
✓
✓
✓
✓
✓
✓
✓
*1
*1
No output
No output
✓
✓
✓
✓
Composite
*4
SCART (European
*1
No output
✓
✓
✓
✓
model only)
*2 If your TV doesn’t support progressive scanning, you’ll get no picture.
*3 If your TV doesn’t support the HD Resolution settings of 720p and 1080i, you’ll get no picture.
*4 With the SCART Output Setting, you can choose RGB, S-Video, or composite video for the SCART output. However, when
HDMI is on, you cannot select RGB. Also, when RGB is selected, nothing will be output by the component video output (see
page 48).
Audio Output/Audio Setting Matrixes
■ Digital Audio Output/Audio Setting Matrix
The following matrix shows how the digital audio outputs work in relation to the Digital/HDMI Audio Out setting.
Setting
Digital/HDMI Audio Out setting (page 48)
*a
*a
Digital
audio output
All (default)
PCM
Off
*b
*b
HDMI
No output
No output
✓
✓
✓
✓
Digital (optical & coaxial)
Audio from SACDs is not output by the HDMI OUT or optical or coaxial digital audio outputs. It’s only output by the analog
audio outputs. Audio from the multichannel area of a DVD-Audio disc is also only output by the analog audio outputs.
*a If your TV or amp doesn’t support higher sampling rates, set the Linear PCM Out setting to Down Sample On (page 48).
option.
■ Analog Audio Output/Audio Setting Matrix
The following matrix shows the recommended audio settings for each analog audio output.
Speaker Configuration (page 48)
Setting
5.1 channel (default):
Subwoofer: On
Front: Small
2 channel:
Subwoofer: Off
Front: Large
Center: Off
Analog audio output
Center: Small
Surround: Small
Surround: Off
*c
2-channel (FRONT/D.MIX)
Multichannel
✓
✓
*c
SCART (European model only)
✓
For 5.1-channel playback with an SACD, press the [AUDIO] button to select the multichannel area of the disc. For 2-channel playback,
select the 2-channel area.
*c If your TV or multichannel amp has a Dolby Pro Logic decoder built in, by setting the Downmix Setting (page 50) to Lt/Rt,
multichannel sources can be down mixed and output as an Lt/Rt mix.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the DVD player—Continued
Before Making Any Connections
• Read the manuals supplied with your AV components.
• Don’t connect the power cord until you’ve completed
all audio and video connections.
The supplied AV cable is made up of an analog audio
cable and a composite video cable.
Analog audio
Right (red)
Left (white)
Right (red)
Left (white)
Optical Digital Outputs
The DVD player’s optical digital connectors have a shut-
ter-type cover that opens when an optical plug is
inserted, and closes when it’s removed. Push the plug in
all the way.
Caution: To prevent shutter damage, hold the optical
plug straight when inserting and removing.
Composite video
(Yellow)
(Yellow)
Right!
• Push each plug in all the way to
make a good connection (loose
connections can cause noise or
malfunctions).
• To prevent interference, keep
audio and video cables away from
power cords and speaker cables.
RCA AV Connection Color Coding
Wrong!
RCA AV connections are usually color coded: red,
white, and yellow. Use red plugs to connect right-chan-
nel audio inputs and outputs (typically labeled “R”). Use
white plugs to connect left-channel audio inputs and out-
puts (typically labeled “L”). And use yellow plugs to
connect composite video inputs and outputs.
Basic Setup
The setup described here is a basic setup that allows you to play discs using just the cables supplied with the player. In
this setup, stereo audio is played through the speakers in your TV.
L
AV cable
(Supplied)
R
TV
ANALOG
INPUT
VIDEO IN
Power cord
(Supplied)
To power outlet
1. Connect the VIDEO OUTPUT and AUDIO OUT-
This player is equipped with copy protection technol-
PUT FRONT/D.MIX 1 jacks to a set of AV inputs
ogy. Do not connect this player to your TV via aVCR
on your TV.
using AV cables, as the picture from this player will
Use the supplied AV cable (RCA), connecting the
not appear properly on your TV. (This player may
red and white plugs to the audio outputs and the yel-
also not be compatible with some combination TV/
low plug to the video output.
VCRs for the same reason; refer to the manufacturer
See the following page if you want to use other cable
for more information.)
for the video connection.
2. Connect the supplied AC power cord to the AC
INLET, then plug into a power outlet.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the DVD player—Continued
Compatibility of this unit with progressive-scan TVs.
This player is compatible with progressive video Macro
Vision System Copy Guard.
ConnectingYour TV
(video connection)
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETSARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS RECOM-
MENDED THAT THE USER SWITCH THE CON-
NECTION TO THE “STANDARD DEFINITION”
OUTPUT. IF THERE ARE QUESTIONS REGARD-
ING OUR TV SET COMPATIBILITY WITH THIS
MODEL 525p AND 625p DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
• Connect the DVD player directly to your TV. If you
connect the DVD player through a VCR, TV/VCR
combination, or video selector, the picture may be dis-
torted because DVD-Video discs are usually copy pro-
tected.
Using S-Video
If your TV (or other equipment) has an S-Video input,
you can use this instead of the standard (composite) out-
put for a better quality picture.
• Use an S-Video cable (not supplied) to connect the S
VIDEO OUTPUT to an S-Video input on your TV (or
monitor or AV receiver).
Line up the small triangle above the jack with the same
mark on the plug before plugging in.
Using SCART (European model only)
If your TV has a SCART-type AV input, you can use a
SCART cable to connect this player to your TV. This
type of connection carries both the sound and the picture,
so there’s no need to connect up the AUDIO OUTPUT
L/R and VIDEO OUTPUT jacks.
S VIDEO
• Use a SCART cable (not supplied) to connect the AV
CONNECTOR to an AV input on your TV.
TV
S VIDEO IN
Using Component Video
AV CONNECTOR
You can use the component video output instead of the
standard video out jack to connect this player to your TV
(or other equipment).
This will provide better quality picture than S-Video.
• Use a component video cable (not supplied) to con-
nect the COMPONENT VIDEO OUTPUT jacks to a
component video input on your TV (or monitor or AV
receiver).
If you connect the component video output to a TV or
another component that doesn’t support progressive
scanning, be sure to turn off HDMI (see page 43).
You can set the component video output to Progressive
or Interlaced (see page 43).
TV
SCART
Y
This connector can output composite video, S-Video, or
RGB video. The default setting is composite, which
should work with all TVs. Consult the manual that came
with your TV to see if you can use one of the higher qual-
ity settings. See page 48 for how to change the video out-
put.
PB
PR
COMPONENT
TV
COMPONENT
VIDEO IN
Y
PB
PR
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the DVD player—Continued
Connecting the Analog Output
Connecting to an AV Receiver
Connect the FRONT/D.MIX 1 or 2AUDIO OUTPUT
jacks on this player to a set of analog audio inputs on
your AV receiver with the supplied AV cable (RCA).
The FRONT/D.MIX 1 and 2 jacks output the same sig-
nals, so use either pair.
Step 1: Audio Connection
using the multichannel analog audio output or one of
the digital audio outputs. In addition, you should also
connect a 2-channel analog audio output for compati-
bility all certain discs.
AV receiver
Step 2:Video Connection (See pages 20–21)
You may also want to connect the DVD player’s video
output to your AV receiver and connect the AV
receiver’s video output to a video input on your TV.
You can use any of the DVD player’s video outputs.
Typically, you must use the same type of video cable
to connect your DVD player to your AV receiver as
you do to connect your AV receiver to your TV.
FRONT/D. MIX
FRONTL
R
1
2
Before Connecting
• Before making any connections, turn off the DVD
player and AV receiver, and disconnect them from the
wall outlets. Failure to do so may result in speaker
damage.
Note:
Connection Hints
• If you use this connection, in the Speaker Configura-
tion (page 48), set the Subwoofer, Center Speaker, and
Surround Speaker settings to Off, so that multichannel
audio sources are down mixed into two channels.
• To enjoy Dolby Digital or DTS surround sound, you
must connect the DVD player to your AV receiver by
using an optical or coaxial digital audio cable or
HDMI cable. See page 24 for HDMI connection infor-
mation.
Connecting the Digital Output
• To record the audio from a CD-R disc to a cassette
deck or CDR recorder that’s connected to the AV
receiver, or if you want to use your AV receiver’s
Zone 2 function, you must connect the DVD player’s
stereo analog audio output to your AV receiver.
• If your AV receiver has an analog multichannel input,
we recommend that you connect it to the DVD
player’s multichannel analog output. This will ensure
that you can enjoy all types of discs, including Dolby
Digital and DTS DVD-Video discs, and DVD-Audio
and SACD discs containing multichannel audio at
higher sampling rates.
Connect one of the DIGITALAUDIO OUTPUT jacks
on this player to a digital input on your AV receiver.
A coaxial digital audio cable is supplied with this player.
COAXIAL
OPTICAL
OPTICAL
COAXIAL
Connect one
or the other
AV receiver
If your AV receiver doesn’t support Dolby Digital and
DTS, set the Digital/HDMI Audio Out setting to PCM.
See page 48, and also refer to the operating instructions
that came with your AV receiver.
Note that digital audio is not output when playing SACD
discs.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the DVD player—Continued
Connecting the Multichannel Analog
Output
Connecting
Components
-compatible
Connect the DVD player’s FRONT/D.MIX 1 or 2,
SURR 1, CENTER, and SUBWOOFER jacks to the
multichannel analog audio input on your AV receiver.
You can use three stereo audio cables for this.
FRONT/D. MIX
REMOTE
CONTROL
AUDIO OUTPUT
ANALOG
1
2
FRONT/D. MIX
SURR1 CENTER
IN
L
2
SUB
WOOFER
R
REMOTE
CONTROL
FRONT
R
L
SUB
CENTER
AV receiver
SURR
• The remote controller supplied with Onkyo AV
receiver or amplifiers can be used to control the DVD
player.
AV receiver
• The function of the upper and lower
are the same. Connect to either one.
connectors
• To use
, in addition to an
connection, you must
■ IfYour AV Receiver has a 7.1-channel Analog
also make an analog audio connection (RCA) between
the DVD player and your other
nents.
Audio Input
-capable compo-
Connect the DVD player’s SURR 1 jacks to your AV
receiver’s surround input jacks, and connect the
SURR 2 jacks to your AV receiver’s surround back
input jacks. The SURR 1 and SURR 2 outputs output
the same signals.
When you make this connection, set the SURR MODE
switch to “1+2.”
If you use this connection, the output level will be
reduced by 3 dB (i.e., the volume level will be reduced
slightly).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the DVD player—Continued
Notes:
Connecting your HDTV or AV
receiver with an HDMI Input
• The DVD player supports HDCP (High-bandwidth
Digital Content Protection), a protection system for
digital video. HDMI components that you connect to
the DVD player must also support HDCP.
This section shows how to connect the DVD player to a
AV receiver, HDTV, or projector that has an HDMI input
socket.
• The DVD player supports High-Definition Multime-
dia Interface Specification Information Version 1.0.
What is HDMI?
HDMI & the DVD player
HDMI (High Definition Multimedia Interface) is a new
connection format that can carry uncompressed, stan-
dard or high definition digital video and digital audio.
Until now, several separate video and audio cables have
been required to connect AV components together. With
HDMI, a single cable is all that’s necessary to achieve
the best picture and audio quality.
HDMI video is compatible with DVI (Digital Visual
Interface). To send HDMI video to a DVI input requires
an HDMI-to-DVI cable. The DVD player supports
HDCP (High-bandwidth Digital Content Protection),
and for an HDMI-to-DVI connection to work, the other
component must also support it. Note that this may not
work with some DVI components.
■ Video
The DVD player’s HDMI OUT supports the following
video resolutions:
• 720 x 480p (progressive), 60 Hz
• 720 x 576p (progressive), 50 Hz (not North American
and Korean models)
• 1280 x 720p (progressive), 50/60 Hz
• 1920 x 1080i (interlaced), 50/60 Hz
If the connected HDTV or projector doesn’t support a
resolution, you may get no picture.
On the DVD player, you can select a resolution suitable
for use with the connected HDTV or projector (see
page 43).
Using HDMI
Use the HDMI cable (not supplied) to connect the DVD
player’s HDMI OUT to an HDMI input on your AV
receiver. Alternatively, you can connect the DVD player
directly to the HDMI input on your TV.
■ Audio Formats
The DVD player’s HDMI OUT supports the following
audio formats:
• PCM (96 kHz, 48 kHz, 44.1 kHz)
• Dolby Digital
• DTS
If your HDMI-compatible TV or projector doesn’t sup-
port Dolby Digital and DTS, the HDMI OUT will not
Digital/HDMI Audio Out setting to PCM (see page 48).
If your TV doesn’t support digital audio at high sampling
On, so that it’s down sampled to below 48 kHz (see
page 48).
Signal flow
HDMI
HDTV,
projector
HDMI
IN
HDMI cable
or
Note that audio from SACD discs is not output by the
HDMI OUT. For this format, you need to use the analog
multichannel output (see page 23).
(not supplied)
AV receiver
HDMI
IN
HDTV,
HDMI
projector
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the DVD player—Continued
Using a Multiroom Kit with Other
Components
Using the Multiroom Control Kits
(North American model only)
In this setup, an IR emitter is connected to the DVD
player’s IR OUT jack and placed in front of the other
component’s remote control sensor. Infrared signals
received at the DVD player’s IR IN jack are fed through
to the other component via the IR emitter. Signals picked
up by the DVD player’s remote control sensor are not
output.
To control the DVD player with the remote controller
when DVD player is located in a cabinet, you’ll need a
commercially available multiroom remote control kit.
• Multiroom kits are made by Niles and Xantech.
These kits can also be used when control other compo-
nents.
Using a Multiroom Kit with a Cabinet
IR Receiver
Connecting
In this setup, the IR receiver picks up the infrared signals
from the remote controller and feeds them to the DVD
player located in the cabinet via the connecting block.
block
IR IN
IR OUT
DVD player
IR Emitter
Remote controller
Other component
IR Receiver
Connecting
block
IR IN
Signal flow
DVD player
The IR emitter should be connected to the DVD player’s
IR OUT jack, as shown below.
Inside
cabinet
Remote controller
Other component
Signal flow
Remote control
Miniplug cable
sensor
Emitter
The miniplug cable from the connecting block should be
connected to the DVD player’s IR IN jack, as shown
below.
Miniplug
IR Emitter
Miniplug cable
DVD player
Signal flow
From the connecting block
DVD player
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Power/Turning on the DVD player
Before connecting
• Before unplugging the player from the
• Make sure that all the connections on pages 18–25 are
power outlet, make sure you first
complete (the connection to a TV is required).
switch it into standby.
• For the above reasons, do not plug this
player into a switched power supply
found on some amplifiers and AV
receivers.
STANDBY/ON
STANDBY indicator
TOP MENU
RETURN
MENU
SETUP
O
To a wall
outlet
ON
STANDBY
Press [STANDBY/ON] button on
the DVD player or [ON] on the
remote controller.
2
STANDBY/ON
Turn on your TV and select the
input through which the DVD
player is connected.
The DVD player turns on and the
STANDBY indicator turns off.
• To put the DVD player in the standby
mode, press [STANDBY/ON] on the
DVD player, or [STANDBY] on the
remote controller.
STANDBY
Remote
controller
• While the STANDBY indicator lights
up, the DVD player can receive signals
from the remote controller.
• Setting the [STANDBY/ON] button to
standby does not shut off the power
completely.
Note:
off function. If the player is stopped and no button is
pressed for 15 minutes, the screen saver starts (see
page 52). If the disc tray is closed but no disc is play-
ing and no control is pressed for 20 minutes, the player
automatically goes into standby (see page 54).
Plug the supplied power cord into
the AC INLET and then into the
power outlet on the wall.
1
• Do not use a power cord other than the
one supplied with the DVD player. The
power cord supplied is designed for
use with the DVD player and should
not be used with any other device.
• Never have the power cord discon-
nected from the DVD player while the
other end is plugged into the wall out-
let. Doing so may cause an electric
shock. Always connect by plugging
into the wall outlet last and disconnect
by unplugging from the wall outlet
first.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
This chapter explains the settings you need to make the
very first time the DVD player is turned on.
Use the Up and Down [ ]/[
]
2
buttons to select “On” or “Off”
for “HDMI Output Setting,” and
then press [ENTER]
Remote
controller
Select “On” to use the HDMI output.
Initial Setup
TV Shape
: 4:3 Letter box
HDMI Output Setting
✔
On
On-Screen Language
Off
ENTER
/
The “On-Screen Language” menu
appears next.
Use the Up and Down [ ]/[
buttons to select a language, and
then press [ENTER].
]
3
Remote
controller
See page 50 for more information on
the language options.
First Time Setup
The very first time you turn on the DVD player, the Ini-
tial Setup menu appears onscreen.
Initial Setup
TV Shape
: 4:3 Letter box
HDMI Output Setting
On-Screen Language
: On
Initial Setup
TV Shape
✔
English
✔
4:3 Letter box
Français
Español
Deutsch
Italiano
HDMI Output Setting
4:3 Pan Scan
On-Screen Language
16:9 Widescreen
16:9 Compressed
The Initial Setup menu closes and the
setup is complete.
The DVD player is now ready to use.
Note:
• You can cancel the Initial Setup by pressing the
[SETUP] button and complete the settings later by
using the onscreen setup menus (see page 45).
Here you need to make a few settings to get the DVD
player up and running. You can change these settings
later (see page 45).
Use the Up and Down [ ]/[
buttons to select aTV shape, and
]
1
Remote
controller
Select “4:3 Letter box” or “4:3 Pan
Scan” if you have a 4:3 TV. Select
“16:9 Widescreen” or “16:9 Com-
pressed” if you have a widescreen TV.
See page 46 for more information.
Initial Setup
TV Shape
✔
4:3 Letter box
HDMI Output Setting
4:3 Pan Scan
On-Screen Language
16:9 Widescreen
16:9 Compressed
The “HDMI Output Setting” menu
appears next.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
This chapter covers basic playback. Advanced playback
functions are covered in the next chapter.
Press
OPEN/CLOSE.
3
The disc tray closes and the relevant disc
type indicator appears on the display.
Important:
• Throughout this manual, the term DVD refers to DVD-
Video, DVD-Audio, DVD-R/RW, and DVD+R/RW
discs. When a function is specific to a particular type
of DVD disc, it will be specified.
Tip:
Remote
controller
type of disc, playback will start automat-
ically.
• For details on playing JPEG picture
JPEG Images” on page 33.
TOP MENU
RETURN
MENU
SETUP
O
Note:
/
• Only load discs that are supported by the DVD player.
See pages 8 to 10.
OPEN/
CLOSE
Starting, Pausing & Stopping
Playback
This section explains how to start, pause, and stop
playback.
■ Start
To start playback, press the Play
] button.
[
If you’re playing a DVD-Video disc, or
a VCD with PBC (Playback Control),
you may need to start playback from a
menu (see page 31).
Press OPEN/CLOSE to open the
disc tray.
1
2
Remote
controller
Remote
controller
See page 32 for more on MP3 discs.
■ Pause
To pause playback, press the
Pause [ ] button.
Playback pauses and the Pause indi-
cator appears on the display.
Load a disc.
Load a disc with the label side facing up,
using the disc tray guide to align the disc
(if you’re loading a double-sided DVD
disc, load it with the side you want to
play face down).
To resume playback, press the Play [
button.
]
Remote
controller
Playback resumes and the Pause
indicator disappears.
For DVD-Audio discs, pause cannot be
used while a menu is displayed.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs—Continued
Select Next & Previous track/chapter
■ Stop
To stop playback, press the Stop
] button.
[
DVD-A
SACD
VCD
CD
MP3
DivX
JPEG
DVD-V
WMA
Playback stops and the Play indica-
tor disappears.
The North American model does not support DivX.
This section explains how to skip to the next and previ-
ous track and chapter.
• When you stop playback of a
DVD-Video disc, the DVD player
remembers the point at which play-
back was stopped and “Resume”
appears onscreen. To resume play-
back from that point, press the Play
Remote
controller
■ Select
Next
During Playback, press the Next
] button to select next track/
[
track/
chapter.
chapter
The Next track/chapter starts playback.
[
] button. To cancel the Resume
function, press the Stop [ ] button
again. The Resume function is reset
DVD player.
Remote
controller
• With the Last Memory function you
can resume playback from any point
even if the disc has been removed
(see page 39).
■ Select
During Playback, press the Previ-
Previous ous [
] button to select previ-
Notes:
track/
ous tack/chapter.
• Prolonged display of the same picture or menu may
cause irreparable damage to your TV screen known as
paused for too long and always press the Stop [ ] but-
ton when you’ve finished playing a DVD-Video disc
or VCD. The DVD player features a screen saver to
protect your TV from the effects of burn-in (see
page 52).
chapter
The first press selects the beginning of
the current track.
Remote
controller
• With some DVD-Video discs, you may experience
picture noise that is not normally visible with standard
TV broadcasts. This is usually because DVD-Video
uses a lot of high-resolution video data. The amount of
noise, if any, will depend on your particular TV and
the problem can sometimes be alleviated by turning
down the TV’s sharpness control.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs—Continued
Forward Frame-by-Frame Playback
VCD
DVD-V
With frame-by-frame playback you can view individual
picture frames one at a time forward.
■ Forward
frame-by-
frame
Press the Pause [ ] button.
Press it repeatedly to view sub-
sequent frames.
Remote
controller
To resume normal playback, press the
Play [ ] button.
Slow-motion Playback
Fast Forward & Reverse
DVD-V
DivX
DVD-A
SACD
VCD
CD
MP3
DVD-V
With slow-motion playback you can watch a scene
slowly either forward or backward.
The North American model does not support DivX.
This section explains how to fast forward and reverse.
■ Forward During playback or paused,
slow
motion
press the SLOW Forward [
button.
]
■ Fast
During playback, press the [
]
forward button to start fast forward.
Forward slow-motion playback starts
and “ 1/2” appears onscreen.
To change the slow-motion speed, press
the SLOW Forward [ ] button repeat-
edly to cycle through the speeds:
1/2, 1/4, 1/6, 1/8.
Remote
controller
Playback fast forwards and “ x2”
appears onscreen.
To change the fast-forward speed, press
the [ ] button repeatedly to select:
x2, x4, x8, x16.
Remote
controller
To resume normal playback, press the
Play [ ] button.
To resume normal playback, press the
Play [ ] button.
■ Fast
reverse
During playback, press the [
button to start fast reverse.
Playback reverses and “ x2” appears
onscreen.
To change the fast-reverse speed, press
the [ ] button repeatedly to select:
x2, x4, x8, x16.
]
■ Backward During playback or paused,
slow
motion
press the SLOW Back [ ] button.
Backward slow-motion playback starts
and “ 1/2” appears onscreen.
To change the slow-motion speed, press
the SLOW Back [ ] button repeatedly
to cycle through the speeds:
Remote
controller
Remote
controller
To resume normal playback, press the
Play [ ] button.
1/2, 1/4, 1/6, 1/8.
To resume normal playback, press the
Play [ ] button.
Notes:
• Fast forward and fast reverse may not always work at
the speed shown onscreen.
• For discs other than audio CDs, no sound is output
during fast forward or fast reverse.
• For DVD-Audio discs, fast forward and fast reverse
cannot be used while a menu is displayed.
Note:
• Backward slow-motion playback cannot be used with
DivX and Video CD. For Video CD, the slow-motion
speed cannot be changed.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs—Continued
On a VCD menu, use the number
buttons to select the tracks.
/
/
/
, ENTER
TOP MENU
Remote
controller
If the VCD’s menu consists of several
TOP MENU
RETURN
MENU
SETUP
pages, use the Next [
] and Previous
O
[
] buttons to view them. During
playback, you can return to the menu
by pressing the [RETURN] button.
/
MENU
Notes:
Number
buttons
• Not all DVDs and VCDs have menus.
• Menu operation varies from disc-to-disc. See the
disc’s sleeve notes for details.
• On some DVDs, to display the disc menu, press the
[MENU] button.
To set VCD’s PBC on and off
PBC menus can turned on or off by pressing the [TOP
MENU] button.
ENTER
/
/
/
TOP MENU
MENU
Navigating CDs & Super Audio CDs
This section explains how to play audio CDs and Super
Audio CDs with the Disc Navigator.
Navigating DVD & VCD Disc Menus
Load an audio CD or Super Audio
1
DVD-V
VCD
DVD-A
CD.
The Disc Navigator appears.
DVD-Video discs usually have a menu from which you
can select titles, chapters, and other options, including
soundtracks, subtitles, and audio formats (e.g., Dolby
Digital or DTS). VCDs that support PBC (Playback
Control) may also have an onscreen menu.
Stop
Disc CD
/Track01.CDA
001. Track01
002. Track02
003. Track03
004. Track04
005. Track05
006. Track06
007. Track07
008. Track08
Repeat
Random :Off
:Off
Load a DVD or VCD.
1
With DVDs, a menu usually appears
when the Play [ ] button is pressed. If
it doesn’t, try pressing the [TOP
MENU] button.
The tracks are displayed.
WithVCDs that support PBC, you may
have to press the Play [ ] button to dis-
play the menu.
Use the Up and Down [ ]/[
buttons to select a track, and
press [ENTER] to start playback.
With SACDs, you can select the multi-
channel area, 2-channel area, or CD
layer by pressing the [AUDIO] button.
]
2
Remote
controller
On a DVD menu, use the arrow
2
[
], [ ], [ ], [ ] buttons to
Remote
select an item, and then press
[ENTER].
controller
Note:
• During random playback or memory playback, the
arrow buttons cannot be used.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs—Continued
Use the Up and Down [ ]/[
buttons to select tracks and sub-
folders in the open folder.
]
3
4
Remote
controller
To open a folder in the list, press the
[ENTER] button. To close a folder (i.e.,
move back up the directory tree), press
the [RETURN] button. Alternatively,
select the item at the top of the list and
press the [ENTER] button.
Use the Left and Right [ ]/[ ] buttons
to display the other folders that contain
playable tracks.
ENTER
/
/
/
RETURN
To play the selected track, press
the Play [ ] or [ENTER] button.
If available, the ID3 tag information,
(Title name, Artist name, Album name,
and so on) will scroll across the bottom
of the screen.
Remote
controller
Navigating MP3, WMA & DivX Discs
MP3
WMA
DivX
or
The North American model does not support DivX.
This section explains how to play MP3, WMA, and
DivX files with the Disc Navigator.
Play
2/3
Disc DATA
3/11
00:00:29 00:03:58 00:04:27
/mp3/Track03.MP3
002. mp3
Repeat
:Off
001. Track01
002. Track02
003. Track03
004. Track04
005. Track05
006. Track06
007. Track07
Random :Off
Load an MP3, WMA, or DivX disc.
The Disc Navigator appears.
1
Stop
Disc DATA
1/3
/mp3
-/5
Name: Onkyo Artist Name: Onkyo Album Name: Onkyo
001. ROOT
002. mp3
For MP3 playback
Repeat
:Off
Random :Off
003. MP3 music
001. Track01
002. Track02
003. Track03
004. Track04
005. Track05
Subsequent tracks in the same folder
are played in order.
Press the Stop [ ] button to stop
playback.
5
Remote
controller
Initially, the folders in the root direc-
The DVD player numbers folders and
tracks in hierarchical order.You can use
these numbers to select folders and
tracks directly with the Search function
(see page 34).
Note:
• During random playback or memory playback, the
arrow buttons cannot be used.
To open a folder, use the Up and
Down [ ]/[ ] buttons to select
it, and then press [ENTER].
2
Remote
controller
The contents of the folder are dis-
played.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs—Continued
Viewing a Slideshow of JPEG Images
Use the Left and Right [ ]/[ ] buttons
to display other folders that contain
JPEG images.
JPEG
This section explains how to display a slideshow of
JPEG images on your TV.
To play a slideshow, press the
Play [ ] or [ENTER] button.
Subsequent images are displayed in
order, with each image being displayed
for five seconds.
4
Remote
controller
Load a JPEG disc.
The Disc Navigator appears.
1
Stop
Disc DATA
To display an image for longer, press
the Pause [ ] button. Press the Play
1/17
/jpg
-/-
001. jpg
Repeat
:Off
or
002. image0
003. image1
004. image2
005. image3
001. 001
[
] button to resume.
Random :Off
Use the Previous and Next [
]/[
]
buttons to view the previous or next
image.
002. 002
003. 003
To flip a picture 180 degrees, use the
Up and Down [ ]/[ ] buttons (not
while zoomed in).
To rotate a picture counterclockwise or
clockwise, use the Left and Right [ ]/
[ ] buttons (not while zoomed in).
To zoom in or out, use the [ ] and
Initially, the folders in the root direc-
The DVD player numbers folders and
files in hierarchical order. You can use
these numbers to select folders and files
directly with the Search function (see
page 34).
[
] buttons. While zoomed in, use the
[ ]/[ ]/[ ]/[ ] buttons to move
around the picture.
To open a folder, use the Up and
Down [ ]/[ ] buttons to select
it, and then press [ENTER].
2
3
To stop the slideshow, press the
Stop [ ] or [MENU] button.
Remote
controller
5
Remote
controller
The contents of the folder are dis
played.
-
The slideshow stops automatically
when all pictures have been displayed.
Use the Up and Down [ ]/[
buttons to select images and
subfolders in the open folder.
]
Remote
controller
■ To display thumbnails
To display thumbnails, in step 3, after opening the folder
you want to display, press the [TOP MENU] button.
Use the arrow [ ], [ ], [ ], [ ] buttons to select the
thumbnails, and press [ENTER] to start a slideshow.
Press the [MENU] button to return to the Disc Navigator.
A thumbnail-size preview for the cur-
rently selected image is displayed.
DATA
1/17
Disc DATA
-/-
/image1/001.JPG
005. image1
001. 001
002. 002
003. 003
004. 004
005. 005
006. 006
007. 007
Repeat
:Off
Random :Off
■ About HD JPEG
If your TV is connected via HDMI and the HDMI reso-
lution is set to 720p or 1080i, you can view your JPEG
images in high definition (see page 47).
W: 150 H: 120
To open a folder in the list, press the
[ENTER] button. To close a folder (i.e.,
move back up the directory tree), press
the [RETURN] button. Alternatively,
select the item at the top of the list and
press the [ENTER] button.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
Use the number buttons to spec-
ify a title, chapter, or track num-
ber.
2
Remote
controller
To enter, for example, “12,” press the
[1] button followed by the [2] button.
SEARCH
Number
buttons
Search
Title
Chapter
Disc
DVD-VIDEO Current/Total 12/ 19 Current/Total 5/
7
Entered title number
appears here
Entered chapter number
appears here
ENTER
If you’re playing a DVD, MP3, WMA,
or DivX disc, use the Left and Right
[ ]/[ ] buttons to select the Title/
Group/Folder and Chapter/Track fields.
To clear a number, press the [CLR] but-
ton.
Selecting Chapters/Titles/Tracks/
Folders by Number
Press the Play [ ] or [ENTER]
button to start playback of the
specified title, chapter, or track.
3
Remote
controller
SACD
VCD
CD
MP3
WMA
DivX
DVD-V
The North American model does not support DivX.
With the Search function you can select chapters, titles,
and tracks by number.
or
Press the [SEARCH] button.
The Search window appears onscreen.
1
Remote
controller
This is what appears for DVDs.
Search
Title
Chapter
Disc
Notes:
DVD-VIDEO Current/Total 1/ 19 Current/Total - - -/ 78
• During playback, you can select other chapters or
tracks directly by using the number buttons (i.e., with-
out pressing the [SEARCH] button). For example, to
select chapter #2, simply press [2]. To select chapter
#10, press [+10] and [0].
This is what appears for CDs.
Search
Track
Disc
CDDA
Current/Total - -/ 10
• DVD-Video discs usually have menus for selecting
titles and chapters.
• When Video CD PBC is on, you can’t search for
tracks. Turn PBC off first.
• The [SEARCH] button cannot be used during random
playback or memory playback.
• Search may not work with some discs.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback—Continued
Press the Play [ ] or [ENTER]
button to start playback of the
specified time.
3
Remote
controller
SEARCH
Number
buttons
or
Notes:
ENTER
• In some cases, playback may start from a slightly dif-
ferent point to the one that you specify.
• Time search may not work with some discs.
• Time search cannot be used while a DVD-Video or
Video CD menu is displayed onscreen.
• The [SEARCH] button cannot be used during random
playback or memory playback.
Searching by Time
SACD
VCD
CD
DVD-V
With the Search function you can search by time.
During playback, press the
[SEARCH] button twice.
The Search window appears onscreen.
1
Remote
controller
Search
Time
Disc
DVD-VIDEO
-:- -:- -
Use the number buttons to enter
a time.
Time search only works within the cur-
rent title or track.
2
Remote
controller
To enter, for example, 5 minutes, 30
seconds, press [5] [3] [0] buttons.
Search
Time
Disc
DVD-VIDEO
-:-5:30
To clear a number, press the [CLR] but-
ton.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback—Continued
A-B Repeat Playback
DVD-V
MP3
SACD
VCD
CD
With the A-B Repeat function you can play a specified
section over-and-over again.
REPEAT
A–B
During playback, press the [A-B]
button to set the A point (i.e., the
start of the section you want to
1
Remote
controller
repeat).
“Repeat A-” appears onscreen and
A indicator appears on the display.
Press the [A-B] button again to
set the B point (i.e., the end of the
section you want to repeat).
2
Remote
controller
Playback repeats between the A and B
points, and “Repeat A-B” appears
onscreen and
appears on the display.
AB indicator
Repeat Playback
DVD-A
SACD
VCD
CD
MP3
WMA
JPEG
DVD-V
To cancel A-B repeat playback,
press the [A-B] button.
3
With the Repeat function you can play a disc, title, chap-
ter, group, track, or folder over-and-over again.
Remote
controller
During playback, press the
[REPEAT] button repeatedly to
select a repeat option.
1
Remote
controller
The selected repeat option appears
onscreen.
The available options depend on the
type of disc, as follows:
Notes:
• The A-B Repeat function may not work with some
DVD-Video discs and VCDs that support PBC.
• In some cases, the A and B points may be at slightly
different points to the ones that you specify.
DVD-Video: Chapter Repeat, Title
Repeat, Disc Repeat, Repeat Off.
DVD-Audio: Track Repeat, Group
Repeat, Repeat Off.
SACD, VCD, CD: Track Repeat, Disc
Repeat, Repeat Off.
MP3, JPEG, WMA: Track Repeat,
Folder Repeat, Disc Repeat, Repeat
Off.
To cancel repeat playback, use
the [REPEAT] button to select
“Repeat Off.”
2
Remote
controller
Notes:
• Repeat playback may not work with some discs.
• If the Memory function is on (see page 38), the select-
able options are Memory Repeat, which plays the
playlist repeatedly, and Repeat Off.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback—Continued
To cancel random playback, use
the [RANDOM] button to select
“Random Off.”
2
Remote
controller
Notes:
RANDOM
• Random playback may not work with some discs.
• To use the Random function with aVCD that supports
PBC, you must first turn off PBC (see page 31).
• If the Memory function is on (page 38), random play-
back is unavailable.
• You can’t use the [SEARCH] button during random
playback.
• During random playback, the remote controller’s
arrow [ ], [ ], [ ], [ ] buttons and number buttons
don’t work with the Disc Navigator.
Random Playback
DVD-V
DVD-A
VCD
CD
MP3
WMA
SACD
• The Random function cannot be used with JPEG files.
With the Random function you can enjoy a random
selection of titles, chapters, groups, tracks, or folders.
During playback, press the [RAN-
DOM] button repeatedly to select
a random option.
1
Remote
controller
The selected random option appears
onscreen.
The options available depends on the
type of disc, as follows:
DVD-Video: Title Random, Disc Ran-
dom, Random Off.
DVD-Audio: Group Random, Random
Off.
SACD, VCD, CD: Disc Random, Ran-
dom Off.
MP3, WMA: Folder Random, Disc
Random, Random Off.
With the Title Random option, chapters
within the current title are played at
random. With the Disc Random option,
titles, chapters, groups, tracks, or fold-
ers on the disc are played at random.
Random playback begins after the cur-
rent chapter or track has finished.
Random playback stops automatically
when all of the items have been played
once.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback—Continued
Repeat step 2 to add more items
to the memory list.
You can add up to 32 items to the mem-
ory list.
3
4
MEMORY
CLR
To play the memory list, press
the Play [ ] button.
Remote
LAST
MEMORY
controller
The Memory Play Setup window must
be open when you press the Play [
button.
]
ENTER
To stop playback, press the Stop
] button.
While playback is stopped, you can
delete the memory list by pressing the
[CLR] button.
/
/
/
5
[
Remote
controller
While playback is stopped, you can
cancel the Memory Playback function
by pressing the Stop [ ] button again.
Memory Playback
DVD-V
VCD
CD
MP3
WMA
SACD
DVD-A
With the Memory Playback function you can create your
own memory list of titles, chapters, and tracks.
Adding New Items to the List
Press the [MEMORY] button.
1
The Memory List window appears
onscreen, as shown.
Use the Up/Down [ ]/[ ] buttons
Remote
controller
1
to select the step before which
you want to insert the new item,
and then press the [ENTER] but-
ton.
Remote
controller
Memory List
Title/Folder
Current/Total 001 / 019 Current/Total --- / 078
No.
Chapter/Track
01
02
03
04
05
06
07
08
--- / 019
--- / 019
--- / 019
--- / 019
--- / 019
--- / 019
--- / 019
--- / 019
--- / 078
--- / 078
--- / 078
--- / 078
--- / 078
--- / 078
--- / 078
--- / 078
Memory List
No.
Title/Folder
Chapter/Track
Current/Total 001 / 019 Current/Total --- / 078
01
02
03
04
05
06
07
08
005 / 019
002 / 019
--- / 019
003 / 019
010 / 019
--- / 019
--- / 019
--- / 019
001 / 078
012 / 078
--- / 078
004 / 078
003 / 078
--- / 078
--- / 078
--- / 078
The top row ( ) is used to enter title/
folder and chapter/track numbers.
The steps in the memory list are num-
bered.
Enter the title/folder, and chapter/
track numbers of the item to be
inserted.
Use the remote controller’s Left/Right
[ ]/[ ] buttons to select the parame-
ters, and use the number buttons to
enter the number.
2
3
Enter the title/folder, and chapter/
track numbers of the item you
want to add to the memory list,
and then press [ENTER].
Use the remote controller’s Left/Right
[ ]/[ ] buttons to select the parame-
ters, and use the number buttons to
enter the number.
Remote
controller
2
Remote
controller
The new item is added to the memory
list as step 01.
Press the [ENTER] button.
The new item is inserted into the mem-
ory list and subsequent items move
down the list.
Remote
controller
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback—Continued
Deleting Items from the List
Last Memory
DVD-V
Remote
controller
Use the Up/Down [ ]/[ ] buttons
to select it, and then press the
[CLR] button.
With the Last Memory function you can resume play-
back from where you left off even if the disc has been
removed and the DVD player has been set to Standby.
Last Memory also remembers the soundtrack and subti-
tle settings you were using.
The item is deleted and subsequent
items move up the list.
Editing Steps
During DVD playback, press the
[LAST MEMORY] button.
The last memory point for the disc is
stored, “LAST MEM” appears on the
display.
1
Use the Up/Down [ ]/[ ] buttons
to select the step.
Remote
controller
1
Remote
controller
If the [LAST MEMORY] button is
pressed again, the last memory point is
updated.
To stop playback, press the Stop
2
Use the Left/Right [ ]/[ ] buttons
and number buttons to edit the
title/folder or chapter/track num-
bers, and then press [ENTER].
Remote
controller
[
] button.
2
Remote
Now you may remove the disc
and turn off the DVD player.
controller
To resume playback, load the
disc, and then press the Play [
button.
3
4
]
Remote
controller
The Last Memory dialog box appears.
Last Memory is set.
Start playback from memory location?
Notes:
• To close the Memory List window, press the
[RETURN] button.
• The memory list will be deleted when the DVD player
is set to Standby or the disc tray is opened.
• To use this function with a VCD that supports PBC,
you must first turn off PBC.
Yes
No
Memory Clear
To resume playback from the last
memory point, select “Yes,” and
then press [ENTER].
Remote
controller
To start playback from the beginning,
select “No,” and then press [ENTER].
To start playback from the beginning
and delete the last memory point, select
“Memory Clear,” and then press
[ENTER].
• The Memory Playback function cannot be used with
some discs.
• JPEG images can be added to the memory list, how-
ever, they will not be displayed.
Notes:
• The Last Memory function can store the last point for
up to six DVDs. When you set the Last Memory func-
tion for a seventh disc, the first disc’s settings are
deleted.
• The Last Memory function will not work while a
menu is being displayed onscreen.
• The Last Memory function may not work with some
DVDs.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback—Continued
Selecting Camera Angles
DVD-V
Some DVDs feature multiple camera angles that allow
you to view scenes from different angles. When a DVD
features multiple camera angles, the camera indicator
appears on the display. Such discs usually have the cam-
era angle logo ( ) printed on the sleeve.
ANGLE
Press the [ANGLE] button repeat-
edly to cycle through the avail-
able camera angles.
/
/
/
Remote
controller
The number of the currently selected
camera angle appears onscreen. For
example, on a disc with three camera
angles, you’d see 1/3, 2/3, and 3/3.
ZOOM
Notes:
Zooming
• With some DVDs you may not be able to select differ-
ent camera angles even though the camera
tor is displayed.
indica-
JPEG
DVD-V
VCD
With the Zoom function you can enlarge any part of the
picture.
• With some DVDs you can select camera angles from
a menu.
During playback or while play-
back is paused, press and hold
the [ZOOM] button for 2 seconds.
1
Remote
controller
The picture is enlarged.
Press the [ZOOM] again repeat-
edly to Zoom in.
2
Remote
The number of zoom steps available
controller
depends on the resolution of the disc or
file.
After the maximum zoom, the picture
returns to its normal size.
To see other areas of the picture
while zoomed, use the remote
3
Remote
controller
controller’s arrow [ ], [ ], [ ],
[
] buttons.
Notes:
• The Zoom function may not work with some discs.
• The Zoom function can also be used during slow-
motion playback.
• The Zoom function cannot be used with HD JPEG.
• The Zoom function cannot be used with disc menus.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback—Continued
Selecting Subtitles
DVD-V
Some DVD-Video discs feature subtitles in several lan-
guages. See the disc’s sleeve notes for details.
During playback, press the [SUB-
TITLE] button repeatedly to cycle
through the available subtitles.
Remote
controller
AUDIO
SUBTITLE
The name of the selected subtitle
appears onscreen for several seconds.
TLE] button to select “Off.”
Notes:
• When you stop playback and cancel the Resume func-
tion (see page 28), the subtitle language will revert to
your default subtile language (see page 50), or the
disc’s default subtitle language.
Selecting Soundtracks
DVD-A
VCD
SACD
DVD-V
Some DVD-Video discs feature soundtracks in several
languages or audio formats (e.g., Dolby Digital or DTS).
Music DVD-Video discs and DVD-Audio discs some-
times feature audio in several formats, such as PCM,
Dolby Digital, or DTS. See the disc’s sleeve notes for
details.
• With some DVDs you can select subtitles from a
menu, and you may not be able to select subtitles dur-
ing playback.
During playback, press the
[AUDIO] button repeatedly to
Remote
controller
cycle through the available
soundtracks.
The name of the selected soundtrack
appears onscreen for several seconds.
ForVCDs, you can select Stereo, Mono
L (left), Mono R (right), or Mix, so long
as all speakers other than the front
speakers are turned off in the Speaker
Configuration.
For SACDs, you can select the multi-
channel area, 2-channel area, or CD
layer. If you make a selection during
playback, playback will stop.
Notes:
• With DVD-Video discs, when you stop playback and
cancel the Resume function (see page 28), the
soundtrack language will revert to your default lan-
guage (see page 50), or the disc’s default language.
• With some discs, selecting another soundtrack may
cause the picture to skip momentarily.
• With some DVDs you need to select soundtracks from
a menu, and you may not be able to select other
soundtracks during playback.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback—Continued
■ Audio CD, Super Audio CD
Displaying Information
Onscreen:
You can display various information about the current
disc, title, chapter, or track as follows.
• Current/total track number, elapsed track time,
remaining track time, and total track time.
• Current/total track number, elapsed disc time, remain-
ing disc time, and total disc time.
During playback, press the [DIS-
PLAY] button repeatedly to cycle
though the information.
1
Display:
• Elapsed track time
• Remaining track time
• Elapsed disc time
• Remaining disc time
Various information appears onscreen.
The operating status (e.g., Stop, Play,
Resume) and disc type information is
displayed along the top of the screen.
Remote
controller
■ MP3, WMA
Onscreen:
• Current/total folder number, current/total track num-
ber in the folder, elapsed track time, remaining track
time (MP3 only), and total track time (MP3 only).
The information displayed depends on the type of disc,
as follows:
Display:
• Elapsed track time
■ DVD-Video
• File name
Onscreen:
• Folder name
• Total number of folders
• Current/total title number, elapsed title time, remain-
ing title time, total title time, selected soundtrack,
selected subtitle, and the number of available camera
angles.
• Current/total chapter number, elapsed chapter time,
remaining chapter time, and total chapter time.
■ JEPG
Display:
• Folder number, track number
• File name
• Folder name
Display:
• Elapsed chapter time
• Remaining title time
• Total number of folders
■ DivX
■ DVD-Audio
Onscreen:
Onscreen:
• Current/total track number, elapsed track time,
remaining track time, total track time, selected
soundtrack, and selected subtitle.
• Current/total track number, elapsed track time,
remaining track time, total track time, and selected
soundtrack.
Display:
• Elapsed track time
• Current/total group number, elapsed group time,
remaining group time, and total group time.
• File name
• Folder name
Display:
• Elapsed track time
• Total number of folders
• Remaining track time
■ Video CD
Onscreen:
• Current/total track number, elapsed track time,
remaining track time, and total track time.
• Current/total track number, elapsed track time,
remaining disc time, and total disc time.
Display:
• Elapsed track time
• Remaining track time
• Elapsed disc time
• Remaining disc time
Note:
• If PBC is on, no information is displayed when the
[DISPLAY] button is pressed.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI and Progressive Settings
RESOLUTION
HDMI
TOP MENU
RETURN
MENU
RESOLUTION
SETUP
O
Note:
Setting the HDMI
• Be sure to choose a resolution that’s supported by your
TV. If you select a resolution that your TV doesn’t
support, there will be no picture.
This section explains how to turn on the HDMI OUT and
change the video resolution when your TV or projector
is connected to the HDMI OUT.
Press the DVD player’s [HDMI]
button to turn on HDMI.
1
Selecting Progressive or Interlaced
If your TV supports progressive video, you can set the
DVD player to progressive and enjoy progressive video
on your TV. If your TV doesn’t support progressive
video, set the DVD player to interlaced.
When HDMI output is at 480p/576p, the component
video output is fixed at progressive and depending on the
selected resolution there may be no output, so turn off
the HDMI OUT before changing this setting.
Press the [RESOLUTION] button
repeatedly to change the HDMI
resolution.
The first button press displays the cur-
rent resolution onscreen. Press the but-
ton again while the resolution is
2
Remote
controller
displayed to change the setting.
Press the DVD player’s [HDMI]
button to turn off HDMI.
1
Use the [RESOLUTION] button to
2
select progressive or interlaced.
The first button press displays the cur-
rent setting onscreen. Press the button
again while the setting is displayed to
The DVD player supports the following resolutions:
Auto:
The resolution is automatically set to the native resolu-
tion of the TV connected to the HDMI OUT.
If the DVD player does not support the TV’s native res-
olution setting, the resolution 480p/576p will be used.
change the setting.
Remote
controller
The PROGRESSIVE indicator appears
on the display when progressive is
selected.
480p (480p/576p) (default):
The setting displayed depends on the country in which
you purchased the DVD player.
720 × 480p 60Hz or 720 × 576p 50Hz
Also output by the DVD player’s analog video outputs.
With this setting, component video output will be pro-
gressive.
720p:
1280 × 720p 50/60Hz
Not output by the DVD player’s analog video outputs.
1080i:
1920 × 1080i 50/60Hz
Not output by the DVD player’s analog video outputs.
Tip:
These settings can also be changed by using the onscreen
setup menus (see pages 46, 47).
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the DVD player
This chapter explains the various functions and settings of the onscreen setup menus.
Functions and settings are arranged into six menus: Picture, Audio, Language, Display, Operation Setting, and Initial.
The following table lists all the functions and settings, with a brief description and page number where you can find full
details.
Menu
Setting
Description
Page #
46
TV Shape
Select the aspect ratio that matches your TV.
Stretch the picture to fit your TV screen.
Turn HDMI video output on or off.
View Mode
46
HDMI Output Setting
46
Set the component video output to progressive or
interlaced.
Progressive Setting
HD Resolution
46
47
47
Select the video resolution for the HDMI OUT.
Picture
For displaying JPEG images at a high resolution on a
HDTV.
HD JPEG Mode
Video Black Level
Brightness
Choose a video black level.
Adjust the picture brightness.
Adjust the picture sharpness.
47
47
47
Sharpness
PAL Output Setting (not North
American and Korean models)
Convert the disc’s video format to NTSC or PAL.
47
48
48
48
Scart Output Setting (Euro-
pean model only)
Selects the video format for the SCART output: RGB,
S-Video, or composite.
Settings for the digital signal output by the optical,
coaxial, and HDMI digital audio outputs.
Digital/HDMI Audio Out
Linear PCM Out
Select whether or not the DVD player down samples
digital audio.
Subwoofer
Front Speaker
Center Speaker
Surround Speaker
Configure the speakers settings for the multichannel
analog audio output.
48
Audio
Test tone for adjusting the level of each channel of
your amp’s multichannel input.
Test Tone
49
49
Center delay
Delay for the multichannel output’s center and sur-
round jacks.
Surr. delay
Dynamic Range Control
Set the Dynamic Range function.
49
49
Determines how the built-in Dolby Pro Logic decoder
works.
Pro Logic
Determines whether DSD or PCM is output when
playing SACDs.
SACD Audio Setup
Downmix Setting
50
50
50
Dolby and DTS downmix settings.
Select a language for the onscreen setup menus and
messages.
On-Screen Language
Language
Disc Menu Language
Audio Language
Select your preferred language for disc menus.
Select your preferred language for soundtracks.
Select your preferred language for subtitles.
50
50
50
Subtitle Language
DivX Subtitle (not North Ameri-
can model)
Select your preferred language for DivX subtitle.
Turn on or off onscreen messages and indicators.
52
52
52
On-Screen Display
Display
Select a color for onscreen setup menus and mes-
sages.
On-Screen Display Color
Select a background color for when playback is
stopped.
Background
52
52
Screen Saver
Set the Screen Saver function.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the DVD player—Continued
Menu
Setting
Description
Page #
53
Parental Lock
Security Code
Set the Parental Lock function.
Change the security code for use with parental lock.
53
Determines what's played on DVD-Audio discs with
DVD-Video contents.
Operation
Setting
DVD Priority Contents
54
Determines how the SACD multichannel and 2-chan-
nel area and the CD area are played.
SACD Priority Contents
Auto Power Off
54
54
54
Sets the Auto power off function.
DivX Registration (not North
American model)
Displays your DivX VOD registration code
Initial Setup
TV Shape
This menu appears automatically the very first time
you turn on your DVD player. (These settings are
available in other menus.)
HDMI Output Setting
On-Screen Language
27
Using the Onscreen Setup Menus
This section explains how to navigate the onscreen setup menus.
Press the [SETUP] button.
The onscreen setup menu appears, as
shown.
1
SETUP
Picture
TV Shape
: 4:3 Letter box
: Normal
: Off
View Mode
HDMI Output Setting
Progressive Setting
HD Resolution
HD JPEG mode
Video Black Level
Brightness
: Interlace
: 480p
: Off
: Light
: Level 4
: Level 4
Sharpness
Progressive Conversion : Auto
Use the arrow [ ]/[ ]/[ ]/[
]
ENTER
2
/
/
/
buttons to navigate the menus,
and press the [ENTER] button to
see the available options.
SETUP
Use the Up/Down [ ]/[ ] buttons
to select the options, and press
the [ENTER] button to confirm
your selection.
3
4
When you’ve finished, press the
[SETUP] button again.
SETUP
The onscreen setup menu closes.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the DVD player—Continued
View Mode
Picture Menu
With this setting you can adjust the aspect of the picture
so that it fits your TV screen. Due to your TV’s aspect
ratio setting and the DVD’s aspect ratio, black bars may
appear above and below the picture or at the sides and the
aspect of the picture may be unsuitable. In this case, use
this setting to adjust the aspect of the picture as you like.
TV Shape
With this setting you can select a picture format to match
the aspect ratio of your TV.
4:3 Letter box (default): Choose
this option if you have a standard
TV (4:3 aspect ratio). When you
watch widescreen DVD-Video
Normal (default): The picture is displayed in its
original aspect ratio.
movies, the entire picture will be
visible and there will be black
View Mode 1: The picture is stretched horizontally
to make it fit the height of the screen.
bars at the top and bottom of the screen, as shown.
View Mode 2: The picture is stretched vertically to
4:3 Pan & Scan:Choose this
make it fit the width of the screen.
option if you have a standard TV
(4:3 aspect ratio) and want to use
the full height of the screen when
watching widescreen
View Mode 3: The picture is stretched horizontally
and vertically.
Tip:
The view mode can also be changed by
using the remote controller’s [ASPECT]
button.
DVD-Video movies. In order to
use the full height of the screen, the picture will be
cropped on both sides, as shown. This option won’t
work with discs that don’t support pan and scan.
Note:
• This setting does not apply to DVD menus.
16:9 Widescreen: Choose this option if you have a
widescreen TV (16:9 aspect ratio). Depends on TV,
the picture appears stretched when watching programs
in 4:3 format.
HDMI Output Setting
With this setting you can turn the HDMI video output on
or off. See page 43 for more information.
16:9 Compressed: Choose
this option if you have a
On (default): Video is output by the HDMI OUT.
widescreen TV (16:9 aspect
ratio) and the picture appears
stretched when watching
programs in 4:3 format. This
option will correct the issue.
Off: Video is not output by the HDMI OUT.
Tip:
This setting can also be changed by using the [HDMI]
button on the front panel (see page 43).
Note:
Notes:
• When this setting is set to On, video is output by the
analog video outputs only when the HD Resolution is
set to 480p/576p.
• This setting does not apply to DVD menus.
• When the HDMI OUT signal is at a resolution of 720p
or 1080i, programs in 4:3 format will appear stretched,
so we recommend that you select the 16:9 Com-
pressed option.
Progressive Setting
With this setting you can set the component video output
to progressive or interlaced. While the HDMI Output
Setting is set to On, this setting is fixed at Progressive
and cannot be changed. See page 43 for more informa-
tion.
• With some DVD-Video discs this setting may have no
effect. See the disc’s sleeve notes to see which picture
format is used.
Interlaced: Component video output is interlaced.
Progressive: Component video output is progressive.
Tip:
When the HDMI Output Setting is set to Off, you can
also change this setting by using the [RESOLUTION]
button on the front panel (see page 43).
46
Download from Www.Somanuals.com. All Manuals Search And Download.
HD Resolution
Brightness
With this setting you can set the video resolution for the
HDMI OUT. See page 43 for more information.
With this setting you can adjust the picture brightness.
Level 1-7: 1 is the darkest. 7 is the brightest. The
Auto: The resolution is automatically set to the
native resolution of the TV connected to the HDMI
OUT.
default brightness is 4 (standard).
Sharpness
480p (480p/576p) (default): The setting displayed
depends on the country in which you purchased the
DVD player.
With this setting you can adjust the picture sharpness.
Level 1-7: 1 is the softest. 7 is the sharpest. The
default sharpness is 4 (standard).
720 x 480p 60 Hz or 720 x 576p 50 Hz
720p: 1280 x 720p 50/60 Hz
PAL Output Setting (Not North American
and Korean models)
1080i: 1920 x 1080i 50/60 Hz
Tip:
With this setting you can specify how the DVD player
outputs video signals when playing NTSC format
DVD-Video discs or Video CDs.
When the HDMI Output Setting is set to On, you can
also change this setting by using the [RESOLUTION]
button on the front panel (see page 43).
AUTO (default): Use this option if your TV supports
both PAL and NTSC. The DVD player does not con-
vert the video format. When you play a PAL disc, the
video output will be PAL format. And when you play
an NTSC disc, it’ll be NTSC format.
Note:
• Initially, the DVD player is configured to output both
HDMI and analog video. However, if after changing
the resolution settings there’s no picture, with the ana-
log video connection or HDMI connection in place,
press the [RESOLUTION] button repeatedly to
restore the picture.
NTSC: Use this option if your TV doesn’t support
PAL playback, or the picture is distorted when
watching PAL discs. The DVD player will convert
PAL format video signals to NTSC-compatible for-
mat.
HD JPEG mode
If your TV is connected to the HDMI OUT and the
HDMI resolution is set to 720p or 1080i, this setting
allows you to display your JPEG pictures in high defini-
tion.
PAL: Use this option if your TV doesn’t support
NTSC playback, or the picture is distorted when
watching NTSC discs. The DVD player will convert
NTSC format video signals to PAL-compatible for-
mat.
On: JPEG pictures displayed in high definition.
Off (default): JPEG pictures displayed as normal.
Note:
• If you select the wrong setting by mistake and loose
the picture, while pressing and holding the Next
button, press the [STANDBY/ON] button to return to
the previous setting.
Notes:
• If your TV is connected to a video output other than
the HDMI OUT, or the HDMI output resolution is set
to something other than 720p or 1080i, even if this set-
ting is set to On, your JPEG pictures will not be dis-
played in high definition.
• When using HD JPEG, it may take a while to display
each picture. And the Zoom function cannot be used.
Also, onscreen status messages such as “Play” and
“Stop” are not displayed.
Video Black Level
With this setting you can adjust the picture blackness for
the analog video outputs. It does not affect the compo-
nent video output when its set to progressive.
Light: Blacks are lighter, and the entire picture
becomes lighter.
Dark: Blacks are darker, and the entire picture
becomes darker.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the DVD player—Continued
• With some discs, even if you select Down Sample Off,
the digital audio will be down sampled, and in some
cases may not be output by the DVD player’s digital
audio outputs.
SCART Output Setting
(European model only)
With this setting you can select the video format to be
used for the SCARTAV CONNECTOR: RGB, S-Video,
or composite video. Before changing this setting, refer to
your TV’s manual to see if its SCART input can accept
video signals in these formats.
Speaker Configuration
With these settings, you can specify which speakers are
connected and their sizes. These settings only apply to
the DVD player’s analog multichannel output. If you
connect to only the FRONT/D.MIX L/R jacks, set the
Subwoofer, Center Speaker, and Surround Speaker set-
tings to Off.
Composite (default): Composite video offers stan-
dard quality.
S-Video: S-Video offers the next best picture quality.
RGB: This format offers the best picture quality.
Notes:
• If you select a format that is not supported by your TV,
the setup menu may disappear from the screen. If this
happens, switch off your equipment, connect the DVD
player to your TV with a composite video or S-Video
cable, and then change this setting.
Note:
• The Speaker Configurations have no effect on
192 kHz/176.4 kHz DVD-Audio.
• To use the Speaker Configuration settings with SACD
playback, in the SACD Audio Setup, select PCM.
• When RGB is selected, nothing is output by the com-
ponent video output and HDMI output.
■ Subwoofer
On (default): Select if a subwoofer is connected.
Off: Select if no subwoofer is connected.
Audio Menu
■ Front Speaker
Digital/HDMI Audio Out
Large: Select if the front speakers are large.
With this setting you can configure the optical, coaxial,
and HDMI digital outputs.
Small (default): Select if the front speakers are
small.
All (default): Dolby Digital and DTS signals are out-
put as they are.
Note:
• If the Subwoofer setting is set to Off, this setting is
fixed at Large and cannot be changed.
PCM: Dolby Digital and DTS signals are down
mixed to 2 channels and output as PCM.
■ Center Speaker
Off: No digital signals are output.
Large: Select if the center speaker is large.
Small (default): Select if the center speaker is small.
Off: Select if no center speaker is connected.
Note:
• MPEG is output as PCM regardless of this setting.
Linear PCM Out
Notes:
With this setting you can configure the DVD player to
output digital audio with higher sampling rates (e.g.,
88.2 kHz, 96 kHz) as it is or to down sample it to 48 kHz
or below.
• If the Front Speaker setting is set to Small, the
Large option cannot be selected.
• The Center Speaker and Surround Speaker settings
can only be set to the same size.
If the AV component you connect to the DVD player’s
digital audio outputs supports 96 kHz digital audio,
select Down Sample Off. Otherwise, select Down Sam-
ple On.
■ Surround Speaker
Large: Select if the surround speakers are large.
Small (default): Select if the surround speakers are
Down Sample On: 196 kHz and 96 kHz sources are
down sampled to 48 kHz, and 176.4 kHz and
88.2 kHz sources are down sampled to 44.1 kHz.
small.
Off: Select if no surround speakers are connected.
Notes:
Down Sample Off (default): Sources are output as
they are.
• If the Front Speaker setting is set to Small, the
Large option cannot be selected.
• The Center Speaker and Surround Speaker settings
can only be set to the same size.
Notes:
• Some copy-protected DVD-Video discs may use
96 kHz digital audio only for D/A conversion to the
analog audio outputs.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the DVD player—Continued
■ Surr. Delay
Test Tone
Surr. Delay (B) = Df – Ds
If you can adjust the volume level of each channel of
your amp’s multichannel input, with this function, you
can output a test tone from each multichannel output
jack in turn and adjust each level as necessary.
1. Use the Up/Down [ ]/[ ] buttons to select a
speaker, and then press the [ENTER] button.
A test tone is output by each speaker as it’s selected.
No Delay (default): When Df equals Ds.
5msec: When (B) is approx. 5 ft. (1.5 m)
10msec: When (B) is approx. 10 ft. (3 m)
15msec: When (B) is approx. 15 ft. (4.5 m)
Notes:
• The delay settings have no effect on 192 kHz/
176.4 kHz DVD-Audio.
• To use the delay settings with SACD playback, in the
SACD Audio Setup, select PCM.
2. Refer to your AV receiver’s instruction manual
for details on adjusting the volume level of each
channel.
Note:
• The test tone is not output by the digital audio outputs.
Dynamic Range Control (Dolby Digital
only)
With the Dynamic Range Control function you can
reduce the dynamic range of Dolby Digital material so
that you can still hear quiet parts even when listening at
low volume levels—ideal for watching movies late at
night when you don’t want to disturb anyone.
Center Delay and Surr. Delay
With these settings, you can adjust the multichannel out-
put signals relative to the listening position.
For 5.1-channel surround playback, ideally your speak-
ers should all be the same distance away from the listen-
ing position, but this isn’t always practical. By setting a
delay time for the center and surround speakers, you can
adjust their virtual positions without having to physically
move them, creating the ideal listening environment. The
diagram below shows the ideal locations for the center
and surround speakers.
Off (default): The full dynamic range is preserved.
On: The dynamic range of Dolby Digital material is
compressed.
Notes:
• The impact of the Dynamic Range Control function
depends on the Dolby Digital material that you are
playing and with some material there will be little or
no effect.
Ideal location of center speaker
• When the DVD player is set to Standby, this function
is automatically set to Off.
• Depending on the Speaker Configuration settings, this
setting may be fixed.
(A)
FL
FR
Df
Dc
SW
All speakers should be
locatedwithinthecircle
with a radius of Df.
Ds
Pro Logic
(B)
This setting determines how the DVD player’s built-in
Dolby Pro Logic decoder works with 2-channel material.
SL
SR
Ideal location of a
surround speaker
On: The Dolby Pro Logic decoder decodes Dolby
Surround material and processes the following audio
formats: 2-channel Dolby Digital on DVD-Video
DVD-Video discs, and 2-channel audio on CDs.
■ Center Delay
Center Delay (A) = Df – Dc
No Delay (default): When Df equals Dc.
1msec: When (A) is approx. 1 ft. (0.3 m)
2msec: When (A) is approx. 2 ft. (0.6 m)
3msec: When (A) is approx. 3 ft. (0.9 m)
4msec: When (A) is approx. 4 ft. (1.2 m)
5msec: When (A) is approx. 5 ft. (1.5 m)
Off (default): The Dolby Pro Logic decoder is off.
Note:
• If the Center Speaker or Surround Speaker is set to Off
in the Speaker Configuration settings (page 48), the
Dolby Pro Logic decoder will not work even if you
select On.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the DVD player—Continued
SACD Audio Setup
Disc Menu Language
With this setting you can choose whether DSD (Direct
Stream Digital) or PCM is output when playing Super
Audio CDs.
When DSD is selected, the Speaker Configuration set-
tings have no effect and the source is output as it is: 2-
channel material is output as 2-channels, and multichan-
nel material is output as multichannel.
for disc menus. When you play a DVD-Video disc with
multiple language disc menus, your preferred language
will be selected automatically.
Select “Others” if the language you want is not dis-
played. See “Selecting Other Languages” on page 51.
Notes:
When PCM is selected, the source is output is in accor-
dance with the Speaker Configuration settings and the
output is down mixed.
• Not all DVD-Video discs have menus in multiple lan-
guages.
• Even if a DVD-Video disc has menus in multiple lan-
guages, this setting may not always work.
• If a DVD has only one menu language, that will be
used.
DSD (default): The source signal is output as it is.
PCM: The source signal is output in accordance with
the Speaker Configuration settings.
• With some DVD-Video discs you can select languages
from a menu.
Downmix Setting
With this setting you can configure the FRONT/D.MIX
AUDIO OUT jacks and AV CONNECTOR for use with
a 2-channel stereo amp or an amp with a built-in Dolby
Pro Logic decoder. It determines how multichannel
audio sources are down mixed.
Audio
for soundtracks. When you play a DVD-Video disc with
multiple language soundtracks, your preferred language
will be selected automatically.
Select “Others” if the language you want is not dis-
played. See “Selecting Other Languages” on page 51.
In the Speaker Configuration, set the Subwoofer, Center
Speaker, and Surround Speaker settings to Off.
Stereo (default): Choose this option if you’re con-
necting the FRONT/D.MIX AUDIO OUT jacks or
AV CONNECTOR to a stereo amp or TV. Multi-
channel audio is down mixed into stereo.
Notes:
• Not all DVD-Video discs have soundtracks in multiple
languages.
• Even if a DVD-Video disc has soundtracks in multiple
languages, this setting may not always work.
• If a DVD has only one soundtrack, that will be used.
• With some DVD-Video discs you can select languages
from a menu.
Lt/Rt: Choose this option if you’re connecting the
FRONT/D.MIX AUDIO OUT jacks or AV CON-
NECTOR to an AV receiver, TV, or other component
with a built-in Dolby Pro Logic decoder. Multichan-
nel audio is down mixed into an Lt/Rt mix, which is
a 2-channel mix containing front left, front right,
center, and surround channel information.
Subtitle Language
With this setting you can select your preferred language
for subtitles. When you play a DVD-Video disc with
multiple language subtitles, your preferred language will
be selected automatically.
Select “No Subtitle” if you don’t want subtitles dis-
played. Select “Others” if the language you want is not
displayed. See “Selecting Other Languages” on page 51.
Language Menu
On-Screen Language
With this setting you can select a language for the
onscreen setup menus and messages.
Select one of the displayed languages.
Notes:
• Not all DVD-Video discs have subtitles.
• Even if a DVD-Video disc has subtitles in multiple
languages, this setting may not always work.
• If a DVD has only one subtitle language, that will be
used.
• With some DVD-Video discs you can select subtitles
from a menu.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the DVD player—Continued
■ Selecting Other Languages
This section explains how to select other languages for
disc menus, audio, and subtitles.
Language
Byelorussian
Bulgarian
Bihari
Code
BE
BG
BH
BI
Language
Panjabi
Code
PA
Polish
PL
Pashto, Pushto
Quechua
Rhaeto-Romance
Kirundi
PS
QU
RM
RN
RO
RW
SA
SD
SG
SH
SI
Select “Others” from the Disc
1
Bislama
Bengali
Remote
controller
Menu Language, Audio Lan-
guage, or Subtitle menu, and
then press [ENTER].
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EO
ET
EU
FA
FI
Tibetan
Breton
Romanian
Kinyarwanda
Sanskrit
Sindhi
Catalan
Corsican
Czech
Use the Left/Right [ ]/[ ] buttons
to select the code.
Use the Up/Down [ ]/[ ] buttons
to enter a language code.
Welsh
Sangho
Serbo-Croatian
Sinhalese
Slovak
2
3
Danish
Remote
controller
Bhutani
Esperanto
Estonian
Basque
Persian
SK
SL
See adjacent table for language codes.
Slovenian
Samoan
Shona
SM
SN
SO
SQ
SR
SS
ST
SU
SW
TA
Finnish
Somali
Fiji
FJ
Albanian
Serbian
Siswati
Faroese
Frisian
FO
FY
GA
GD
GL
GN
GU
HA
HI
When you’ve finished, press the
[ENTER] button.
Remote
controller
Irish
Sesotho
Sundanese
Swahili
Scots-Gaelic
Galician
Guarani
Gujarati
Hausa
Tamil
Telugu
TE
TG
TH
TI
Tajik
Hindi
Thai
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
HR
HU
HY
IA
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Use this list when specifying other languages.
TK
TL
Language
Japanese
English
Code
JA
Language
Kirghiz
Code
KY
LA
TN
TO
TR
TS
TT
IE
EN
FR
DE
IT
Latin
IK
Turkish
French
Lingala
LN
Indonesian
Icelandic
Hebrew
Yiddish
IN
Tsonga
Tatar
German
Italian
Laothian
Lithuanian
Latvian
LO
LT
IS
IW
JI
Twi
TW
UK
UR
UZ
VI
Spanish
Chinese
Dutch
ES
ZH
NL
PT
SV
RU
KO
EL
LV
Ukrainian
Urdu
Malagasy
Maori
MG
MI
Javanese
Georgian
Kazakh
JW
KA
KK
KL
KM
KN
KS
KU
Uzbek
Portuguese
Swedish
Russian
Korean
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NO
OC
OM
OR
Vietnamese
Volapük
Wolof
Greenlandic
Cambodian
Kannada
Kashmiri
Kurdish
VO
WO
XH
YO
ZU
Xhosa
Greek
Yoruba
Afar
AA
AB
AF
AM
AR
AS
AY
Zulu
Abkhazian
Afrikaans
Amharic
Arabic
Maltese
Burmese
Nauru
Nepali
Assamese
Aymara
Azerbaijani
Bashkir
Norwegian
Occitan
Oromo
AZ
BA
Oriya
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the DVD player—Continued
DivX Subtitle (Not North American model)
Display Menu
Some DivX video discs include subtitles in one or more
languages. The disc packaging will usually inform you
about which subtitle languages are available.
With this setting you can select your preferred language
for DivX subtitles. When you play a DivX disc with mul-
tiple language subtitles, your preferred language will be
selected automatically.
On-Screen Display
With this setting you can turn on or off onscreen mes-
sages, such as “Play,” “Stop,” and “Resume.”
Off: Onscreen messages are not displayed.
On (default): Onscreen messages are displayed.
You can select DivX subtitle languages by region:
On-Screen Display Color
Unicode (UTF-8): Unicode encoding scheme. Two
With this setting you can set the color and theme of the
Disc navigation window.
bytes are used to encode each character.
Western European
Turkish
Sapphire
Pearl
Central European
Cyrillic
Amethyst
Garnet
Greek
Hebrew
Background
Arabic
With this setting you can select the color of the back-
ground that’s displayed when the DVD player is stopped.
Baltic
Vietnam
Blue
Gray
Note:
• Some external subtitle files may display incorrectly or
not at all.
Graphic: The theme picture specified for the On-
Screen Display Color setting is used.
Screen Saver
With the Screen Saver function you can protect your TV
against screen burn-in, which can occur when the same
image or menu is displayed for a long time.
Off: Screen saver off.
On (default): Screen saver on.
When the Screen Saver function is set to On, and play-
back is stopped for 15 minutes, the Screen Saver func-
tion automatically displays a moving image.
Once the screen saver has been activated, you can cancel
it by pressing either the Play [ ] button.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the DVD player—Continued
Change the Security Code
Operation Setting Menu
To change the Security Code, confirm your existing code
then enter a new one.
Setting the Parental Lock
With the Parental Lock function you can block access to
certain scenes that the authors have flagged as being
unsuitable for children.
Select “Operation Setting” menu
in the setup.
1
Use the Up/Down [ ]/[ ] buttons
to select “Security Code,” and
then press the [ENTER] button.
2
Select “Operation Setting” menu
1
Remote
controller
in the setup.
The security code input screen appears.
Use the Up/Down [ ]/[ ] buttons
to select “Parental Lock,” and
then press the [ENTER] button.
2
Remote
controller
The security code input screen appears.
Enter the existing security code
using the remote controller’s
3
Remote
controller
number buttons, and then press
the [ENTER] button.
Enter the security code using the
remote controller’s number but-
tons, and then press the [ENTER]
button.
The default security code is “8888.”
You can change the security code in the
next section.
3
The default security code is “8888.”
Even if a new security code has been
entered, the code “8888” can still be
used.
Once the security code has been
entered, the new security code input
screen appears.
Remote
controller
Enter the new security code
using the remote controller’s
4
Remote
controller
number buttons, and then press
the [ENTER] button.
The new security code has been set.
Use the Up/Down [ ]/[ ] buttons
to change the level of parental
4
Remote
lock, and then press the [ENTER]
controller
button.
At level 8 parental lock is off, with level
1 being the strictest level.
Notes:
• When entering a security code, you can use the [CLR]
button to delete the numbers entered so far, if neces-
sary.
• Not all discs use parental lock. See the disc’s sleeve
notes for details.
• Discs with parental lock may cut certain scenes,
replace certain scenes with children-friendly scenes,
or prevent playback of the entire disc.
Note:
• If you forget your security code, enter “8888” instead.
“8888” is a security code that can always be used.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the DVD player—Continued
®
DVD Priority Contents
DivX Registration
This setting determines what is played when a
DVD-Audio disc also contains DVD-Video material.
To play DivX VOD (video on demand) content on this
DVD player, you first need to register it with your DivX
VOD content provider.You do this by generating a DivX
VOD registration code, which you then submit to your
provider.
Your 8-digit registration code is displayed.
Burn DivX VOD content that you download to a blank
CD-R.
DVD-AUDIO (default): The DVD-Audio material is
played.
DVD-VIDEO: The DVD-Video material is played.
SACD Priority Contents
SACDs have two separate areas for storing audio
tracks—one for multichannel audio, the other for 2-
channel stereo audio. In addition, hybrid SACDs have
an extra layer for playback in standard CD players.
With this setting you can determine how SACDs are
played by the DVD player.
DivX® Video On Demand
Your registration code is:
01234567
(http://www.divx.com/vod)
OK
2 ch Area: The 2-channel stereo audio tracks are
played.
Make a note of the code as you will need it when you
register with a DivX VOD provider.
Multi ch Area (default): The multichannel audio
tracks are played.
Important:
• DivX VOD content is protected by DRM (digital
rights management). This restricts playback of content
to specific, registered devices.
CD Area: The CD layer of hybrid SACDs is played.
Notes:
• This setting determines which area of the disc is
played initially. If Multi ch Area is selected, and an
SACD that contains no multichannel area is loaded,
the 2-channel area will be played.
Auto power off
The Auto power off function automatically turns off the
DVD player after 20 minutes of inactivity.
Off (default): Auto power off function off.
On: Auto power off function on.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Resetting the player
Disc Content Organization
Use this procedure to reset all the player’s settings to the
factory default.
■ DVD-Video Format
DVD-Video discs contain titles, which are usually subdi-
vided into chapters.
Turn on the DVD player.
1
Title 2
Title 1
Wait until “ONKYO DVD” has disap-
peared from the display.
Chapter 1
Chapter 2
Chapter 1
Chapter 2
Using the front panel buttons,hold
2
down the Stop [ ] button and
press [STANDBY/ON] button.
“INITIALIZE” appears on the display.
When the reset is complete, “COM-
DVD-Video
■ DVD-Audio
DVD-Audio discs contain groups and tracks.
PLETE” is displayed, and the DVD
player enters Standby mode.
STANDBY/ON
Group 1
Track 2
Group 2
Track 1 Track 2
Track 1
Track 3
STANDBY
DVD-Audio
■ SACD
SACDs have two separate areas for storing audio
tracks—one for multichannel audio, the other for 2-
channel stereo audio. In addition, hybrid SACDs have an
extra layer for playback in standard CD players.You can
specify how the DVD player handles SACDs on page 50.
Adjusting the Display Brightness
You can adjust the brightness of the display as follows.
Press the [DIMMER] button
repeatedly to cycle through the
following options:
1
Multichannel area
Track 1 Track 2 Track 3
Stereo area
Track 2
Track 1
Track 3
dim, dimmer, normal.
CD layer of a hybrid SACD
SACD
DVD-Video regions
■ VCD
VCDs contain video tracks.
All DVD-Video discs carry a region mark on the case
somewhere that indicates which region(s) of the world
the disc is compatible with. Your DVD player also has a
region mark, which you can find on the rear panel. Discs
from incompatible regions will not play in this player.
Discs marked “ALL” will play in any player.
The diagram below shows the various DVD regions of
the world.
Track 1
Track 2
Track 3
Track 4
Video CD
■ Audio CD Format
Audio CDs contain tracks.
Track 1
Track 2
Track 3
Track 4
Track 5
1
5
2
1
Audio CD
6
2
3
4
5
2
4
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information—Continued
■ MP3, WMA, JPEG & DivX Files
MP3, WMA, JPEG, and DivX files are typically orga-
nized into folders. The DVD player handles MP3,
WMA, JPEG, and DivX files as tracks.
Folder 1
Track 2
Folder 2
Track 1 Track 2
Track 1
Track 3
MP3/WMA/JPEG/DivX (CD-R/CD-RW)
Glossary
Analog audio
DRM
An electrical signal that directly represents sound. Com-
pare this to digital audio which can be an electrical sig-
nal, but is an indirect representation of sound. See also
“Digital audio.”
DRM (digital rights management) is a type of server
software developed to enable secure distribution of paid
content over the web, recently incorporated by WMA
(Windows Media Audio).
*3
Aspect ratio
DTS
The width of a TV screen relative to its height. Conven-
tional TVs are 4:3 (in other words, the screen is almost
square); widescreen models are 16:9 (the screen is
almost twice as wide as it is high).
DTS stands for Digital Theater Systems. DTS is
a surround system different from Dolby Digital that has
become a popular surround sound format for movies.
Dynamic range
Digital audio
The difference between the quietest and loudest sounds
possible in an audio signal (without distorting or getting
lost in noise).
Dolby Digital and DTS soundtracks are capable of a very
wide dynamic range, delivering dramatic cinema-like
effects.
An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analog-to-
digital converter, generating a stream of numbers.
On playback, a digital-to-analog converter generates an
analog signal based on these numbers. See also “Sam-
pling frequency” and “Analog audio.”
File extension
A tag added to the end of a filename to indicate the type
of file. For example, “.mp3” indicates an MP3 file.
*1
DivX
DivX is a media technology created by DivX,
Inc. DivX media files contain compressed video. DivX
files can also include advanced media features like
menus, subtitles, and alternate audio tracks.
HD
Abbreviation for high definition, as in HDTV (high-def-
inition TV).
HDCP (High-bandwidth Digital Content Protection)
The video encryption technology developed by Intel for
HDMI/DVI. It’s designed to protect video content and
requires a HDCP-compatible device to display the
encrypted video.
*2
Dolby Digital
Using a maximum of 5.1 channels of audio,
this high quality surround system is used in many of the
finer movie theaters around the world.
The on-screen display shows which channels are active,
for example showing 3/2.1. The 3 being the two front
channels and the center channel; the 2 being the surround
channels, and the .1 being the LFE channel.
*1. DivX, DivX Certified, and associated logos are trademarks of
DivX, Inc. and are used under license.
*2. Manufactured under license from Dolby Laboratories. “Dolby”
and the double-D symbol are trademarks of Dolby Laborato-
ries.
*3. “DTS” and “DTS Digital Surround” are registered trademarks
of Digital Theater Systems, Inc.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary—Continued
*1
Regions (DVD-Video only)
HDMI
These associate discs and players with particular areas of
the world. This unit will only play discs that have com-
patible region codes. You can find the region code of
your unit by looking on the rear panel. Some discs are
compatible with more than one region (or all regions).
HDMI (High-Definition Multimedia Interface) is a high-
speed digital interface which has the capability to sup-
port standard, enhanced, or high-definition video plus
standard to multichannel surround-sound audio on a sin-
gle digital connection. HDMI features include uncom-
pressed digital video, a bandwidth of up to 5 gigabytes
per second and communication between the AV source
and AV devices such as DTVs.
Sampling frequency
The rate at which sound is measured to be turned into
digital audio data. The higher the rate, the better the
sound quality, but the more digital information is gener-
ated. Standard CD audio has a sampling frequency of
44.1kHz, which means 44,100 samples (measurements)
per second. See also “Digital audio.”
ISO 9660 format
International standard for the volume and file structure
of CD-ROM discs.
JPEG
WMA
A file format used for still images, such as photographs
and illustrations. JPEG files are identified by the file
extension “.jpg” or “.JPG”. Most digital cameras use this
format.
WMA is short for Windows Media Audio and refers to
an audio compression technology developed by
Microsoft Corporation. WMA data can be encoded by
using Windows Media Player version 8.
MP3
MP3 (MPEG1 audio layer 3) is a compressed audio file
format. Files are recognized by their file extension
“.mp3” or “.MP3”.
MPEG video
The video format used for Video CDs and DVDs. Video
CD uses the older MPEG-1 standard, while DVD uses
the newer and much better quality MPEG-2 standard.
PBC (PlayBack Control) (Video CD only)
A system of navigating a Video CD through on-screen
menus recorded onto the disc. Especially good for discs
that you would normally not watch from beginning to
end all at once—karaoke discs, for example.
PCM (Pulse Code Modulation)
The most common system of encoding digital audio,
found on CDs and DAT. Excellent quality, but requires a
lot of data compared to formats such as Dolby Digital.
For compatibility with digital audio recorders (CD, MD,
and DAT) andAV amplifiers with digital inputs, this unit
can convert Dolby Digital, and DTS to PCM. See also
“Digital audio.”
Progressive scan video
All the lines that make up a video picture are updated in
one pass (compared to interlace which takes two passes
to update the whole picture).
*1. HDMI, the HDMI logo and High-Definition Multimedia Inter-
face are trademarks or registered trademarks of HDMI licens-
ing LLC.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Symptom
Possible cause
Remedy
Connect the power cord to a suitable wall outlet
(page 26).
The power cord is not connected.
Can’t turn on the DVD
player?
turning it on again. If that fails, disconnect the
power cord from the wall outlet, wait ten seconds,
reconnect it, then try turning it on again.
External interference is affecting the DVD
player’s digital circuitry.
The DVD player turns
itself off when it’s not
being used?
TheAuto power off function will turn the DVD
player off automatically after 20 minutes of
inactivity.
TheAuto power off function can be turned on or off
as required (page 54).
On your TV, select the input to which the DVD
player is connected.
The wrong input source is selected on your TV.
The video cable is not connected properly.
Check the video cable and correct as necessary.
The PAL Output Setting is set wrong for your Change the PAL Output Setting to suit your TV
TV.
(page 47).
The SCART Output Setting is set wrong for
your TV.
Make sure your TV supports the selected video
output format (page 48).
No HDMI Video Output?
The HDMI Output Setting is set to Off.
Try pressing the [HDMI] button on the front panel
repeatedly to switch the HDMI OUT on, and then
get picture (page 43).
Your TV doesn’t support HDMI Resolution
settings of 720p and 1080i.
If the DVD player is connected to yourAV receiver,
try connecting it directly to your TV. It will not
work if you connect to a component that doesn’t
support HDCP (page 24).
No picture?
The connected component doesn’t support
HDCP.
No Component Video Output?
Your TV does not support progressive scan-
ning, and the HDMI OUT is on.
While the HDMI OUT is on, the component
video output outputs progressive video.
Try pressing the [HDMI] button on the front panel
repeatedly to switch the HDMI OUT off, and then
pressing the [RESOLUTION] button repeatedly to
switch to Interlaced (page 43).
The HDMI Resolution is not set to 480p
(480p/576p).
Press the [RESOLUTION] button repeatedly to
select 480p (480p/576p) (page 43).
No S-Video or Composite Video Output?
The HDMI Resolution is not set to 480p
(480p/576p).
Try pressing the [RESOLUTION] button on the
front panel repeatedly to get picture (page 19).
The wrong input source is selected on your
hi-fi amp or AV receiver.
which the DVD player is connected.
The audio cable is not connected properly.
Your hi-fi amp or AV receiver is turned off.
Check the audio cable and correct as necessary.
Turn on your hi-fi amp or AV receiver.
No sound?
Not all of the analog and digital audio outputs See page 19 for details on how the DVD player out-
work with all disc types and formats. puts audio from each output.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting—Continued
Symptom
Possible cause
Remedy
No Sound from the HDMI OUT?
The Digital/HDMI Audio Out setting is set to Change the Digital/HDMI Audio Out setting to
Off. either All or PCM (page 48).
on your TV or AV receiver. your TV or AV receiver only supports DVI.
is set to DVI. receiver to HDMI.
Your TV orAV receiver doesn’t support Dolby Change the Digital/HDMI Audio Out setting to
or DTS.
PCM (page 48).
SACD audio is not output by the HDMI OUT
(page 19).
You’re playing an SACD.
No sound?
Your TV or AV receiver doesn’t support
88.2 kHz, 96 kHz, 176.4 kHz or 196 kHz
PCM.
ple On (page 48).
No Digital Audio Output?
The Digital/HDMI Audio Out setting is set to Change the Digital/HDMI Audio Out setting to
or DTS.
PCM (page 48).
Your TV or AV receiver doesn’t support
88.2 kHz, 96 kHz, 176.4 kHz or 196 kHz
PCM.
Change the Linear PCM Out setting to Down Sam-
ple On (page 48).
The disc is dirty.
The picture distorts occa-
sionally?
function.
these functions. This is normal.
The DVD player is connected to your TV via a
VCR or other video equipment whose copy
protection system is affecting the picture.
Picture instability or
noise?
Connect the DVD player directly to your TV
(page 20).
No disc loaded.
The disc is incompatible.
The disc is upside down.
Load only compatible discs (pages 8, 9).
Load the disc the correct way up (page 28).
Place the disc in the center of the disc tray
(page 28).
Can’t start playback?
The disc is not centered in the disc tray.
The disc is dirty.
The disc supports parental lock and the Paren-
tal Lock function is on.
Turn off the Parental Lock function (page 53).
Can’t watch the
DVD-Video material on a
DVD-Audio disc?
The DVD Priority Contents setting is set to
DVD-AUDIO.
Set the DVD Priority Contents setting to
DVD-VIDEO (page 54).
Can’t play the multichan-
nel area of a hybrid
SACD?
The SACD Priority Contents setting is not set Set the SACD Priority Contents setting to Multi ch
to Multi ch Area.
Area (page 54).
The disc is not ISO 9660 Level 2 format.
The disc has not been finalized.
Use only ISO 9660 Level 2 format discs (page 9).
Finalize the disc (page 9).
Can’t play MP3 and JPEG
discs?
There’s a noise when using During CD 1-Track Repeat playback, the start
repeat playback. of the next track may be heard.
This is not a malfunction.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting—Continued
Symptom
Possible cause
Remedy
MP3 files without a “.mp3” or “.MP3” file-
name extension are not recognized.
Use the correct filename extension (page 9).
Can’t select MP3 files?
Only files in the first session of a multisession disc
can be played (page 9).
The MP3 disc is a multisession disc.
WMA files without a “.wma” or “.WMA” file-
name extension are not recognized.
Use the correct filename extension (page 9).
Can’t play WMA files?
The WMA file’s copyright option is on.
JPEG files without a “.jpg” or “.JPG” or
“.JPEG” filename extension are not recog-
nized.
Use the correct filename extension (page 9).
Can’t view JPEG files?
Can’t play a DivX file?
Use JPEG files that are less than 5 megabytes
(page 9).
The JPEG file is too big.
Make sure the DivX file was encoded with DivX
Version 5, 4, or 3 Home Theater mode.
The file is not encoded correctly.
DivX plays but there’s no
sound?
The DVD player may not support the audio
format.
Try re-encoding the file with a supported audio for-
mat.
Turn off the DVD player, wait five seconds, then
turn it on again. If that doesn’t resolve the issue,
disconnect the power cord from the wall outlet,
Buttons on the DVD player Power supply voltage fluctuations and other
and remote controller
don’t work?
anomalies, such as static electricity, can inter-
fere with normal operation.
There are no batteries in the remote controller. Install new batteries (page 11).
The batteries are flat.
Replace with new batteries (page 11).
(page 11).
The batteries are installed incorrectly.
You’re not pointing the remote controller at the Point the remote controller at the DVD player’s
DVD player’s remote sensor.
remote sensor (page 11).
Buttons on the DVD player
work OK but those on the
remote controller don’t?
Use the remote controller closer to the DVD player
(page 11). The remote controller has a range of
approximately 16 ft. (5 meters).
You’re too far away from the DVD player.
Make sure that the DVD player is not subjected to
direct sunshine or inverter-type fluorescent lights.
Relocate if necessary.
A strong light source is interfering with the
DVD player’s remote sensor.
If the DVD player is installed in a cabinet with
colored glass doors, the remote controller may
not work reliably when the doors are closed.
Open the doors, or use a cabinet without colored
glass.
The DVD player contains a microcomputer for signal processing and control functions. In very rare situa-
tions, severe interference, noise from an external source, or static electricity may cause it to lockup. In the
unlikely even that this should happen, unplug the power cord from the wall outlet, wait at least ten seconds,
and then plug it back in again. Alternatively, press and hold the Stop [ ] button until “RESET” appears on
the display (about 10 seconds).
Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused by the
unit’s malfunction. Before you record important data, make sure that the material will be recorded correctly.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting—Continued
■ HDMI Status Mode
If you’re using an HDMI connection and there’s no picture or sound, you can check the status of the HDMI connection
by pressing and holding down the DVD player’s [DISPLAY] button for 10 seconds until a message ID appears on the
display. Look up the message ID in the following tables and check the HDMI connections and settings on both the DVD
player and the connected component.
HDMI connection and HDMI-related settings status
Displayed ID
Message
Turn the DVD player and the connected component off, then turn them on again. Make sure that
the connected component is working properly and that the DVD player’s HDMI settings are config-
ured suitably for that component.
MSG ID 001
MSG ID 015
No picture from the HDMI connection
Displayed ID
Message
MSG ID 002
The HDMI Output Setting is set to Off. Change it to On (page 43).
MSG ID 003
MSG ID 004
The HDMI cable may not be connected properly. Check the connection. Also, make sure the HDMI
input on the TV or AV receiver is correctly configured to received HDMI.
Make sure the HDMI input on the TV or AV receiver is correctly configured to received HDMI.
The connected component may not support HDCP. Make sure the connected component supports
HDCP.
Turn the DVD player and the connected component off, then turn them on again.
receive the video output by the DVD player. Also, with a DVI connection, there will be no sound.
MSG ID 005
MSG ID 006
MSG ID 007
The DVD player’s HD Resolution setting is set to 720p or 1080i. If your TV doesn’t support these
resolutions, select another resolution (page 43).
MSG ID 008
MSG ID 009
The connected component may not be receiving the HDMI signal properly.
Try selecting another resolution on the DVD player (page 43).
No sound from the HDMI connection
Displayed ID
Message
(page 48).
MSG ID 010
MSG ID 011
MSG ID 014
The connected component may not support 96 kHz PCM. Set the DVD player’s Linear PCM Out
setting to Down Sample On (page 48).
MSG ID 012
MSG ID 013
The connected component may not support Dolby Digital. Set the DVD player’s Digital/HDMI Audio
Out setting to PCM (page 48).
MSG ID 016
MSG ID 017
The connected component may not support DTS. Set the DVD player’s Digital/HDMI Audio Out
setting to PCM (page 48).
MSG ID 020
Audio from SACDs is not output by the HDMI OUT (page 19).
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
North American and Korean model: NTSC
Other model: PAL/NTSC
Signal System
Composite Video Output/Impedance
S-Video Output/Impedance
1.0 V (p-p)/75Ω negative sync, RCA
Y: 1.0 V (p-p)/75Ω negative sync, 4-pin mini DIN
C: 0.286 V (p-p)/75Ω
Y: 1.0 V (p-p)/75Ω
PB/PR: 0.7 V (p-p)/75 Ω RCA/ phono
Component Video Output/Impedance
AV Connector (European model only)
Component Video Frequency Response
DVD Audio
1.0 V (p-p)/75Ω, Scart
5 Hz–50 MHz
4 Hz–88 kHz (192 kHz)
4 Hz–50 kHz
Super Audio CD
Frequency response
4 Hz–44 kHz (96 kHz)
4 Hz–22 kHz (48 kHz)
DVD Linear Sound
Audio CD
4 Hz–20 kHz (44.1 kHz)
106 dB
S/N Ratio
Audio Dynamic Range
96 dB
THD (Total Harmonic Distortion)
Wow and Flutter
0.003% (1 kHz)
Below threshold of measurability
–22.5 dBm
Audio Output (Digital/Optical)
Audio Output/Impedance (Digital/Coaxial)
0.5 p-p/75Ω
FRONT D.MIX/CENTER/SUBWOOFER: 2.0 V/440Ω
SURROUND 1, 2: 2.0 V/440Ω (SURR MODE 1)
1.4 V/440Ω (SURR MODE 1+2)
Audio Output/Impedance (Analog)
■ General
North American model: AC 120 V, 60 Hz
Other model: AC 100–240 V, 50/60 Hz
Power Supply
Power Consumption
17 W
Stand-by Power Consumption
0.4 W
435 x 81 x 309 mm
(17 1/8 x 3 3/16 x 12 3/16 ins.)
Dimensions (W x H x D)
Weight
3.7 kg (8.2 lbs.)
Operation Condition Temperature and Humidity
5˚C–35˚C (41˚F–95˚F), 5%–85%
SACD, DVD-Audio, DVD-video, DVD-R/RW (VR, VIDEO),
DVD+R/RW, CD, CD-R/RW, Video CD, MP3, WMA, JPEG,
DivX (not North American model)
Disc Compatibility
Disc that have not been property finalized may only be partially
playable or not playable at all
Specifications and features subject to change without notice.
The letter displayed at the end of the product name found in catalogs and on package represents the color of the DVD
player. Though the color varies, the specifications and operations are the same.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Memo
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8023 Fax: 072-831-8124
ONKYO U.S.A. CORPORATION
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
ONKYO EUROPE ELECTRONICS GmbH
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
ONKYO EUROPE UK Office
Suite 1, Gregories Court, Gregories Road, Beaconsfield, Buckinghamshire, HP9 1HQ
UNITED KINGDOM Tel: +44-(0)1494-681515 Fax: +44(0)-1494-680452
HOMEPAGE
ONKYO CHINA LIMITED
Unit 1&12, 9/F, Ever Gain PlazaTower 1, 88, Container Port Road, Kwai Chung,
N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039
I0608-1
SN 29344210
(C) Copyright 2006 ONKYO CORPORATION Japan. All rights reserved.
* 2 9 3 4 4 2 1 0 *
Download from Www.Somanuals.com. All Manuals Search And Download.
|