Contents
Before using
Supplied accessories......................... 4
Before operating this unit................. 5
Connecting other components.......... 6
Compact Disc Player
DX-7333
Instruction Manual
Operation
Playing CDs...................................... 7
Using the memory function............ 10
Useful Functions............................. 12
Other informations
Control positions and names .......... 14
Precautions for handling
the Compact Disc (CD) ............... 15
Troubleshooting Guide................... 16
Specifications ................................. 16
Thank you for purchasing the Onkyo CD player.
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new CD player.
Please retain this manual for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
1. Warranty Claim
You can find the serial number on the rear panel of this unit. In case
of warranty claim, please report this number.
For British model
Replacement and mounting of an AC plug on the power supply cord
of this unit should be performed only by qualified service personnel.
2. Recording Copyright
Recording of copyrighted material for other than personal use is
illegal without permission of the copyright holder.
IMPORTANT
The wires in the mains lead are coloured in accordance with the
following code:
Blue : Neutral
3. Power
Brown : Live
WARNING
As the colours of the wires in the mains lead of this apparatus may
not correspond with the coloured markings identifying the termi-
nals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the termi-
nal which is marked with the letter L or coloured red.
BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME,
READ THE FOLLOWING SECTION CAREFULLY.
The voltage of the available power supply differs according to
country or region. Be sure that the power supply voltage of the area
where this unit will be used meets the required voltage (e.g., AC
230–240 V, 50 Hz) written on the rear panel.
4. Do not touch this unit with wet hands
IMPORTANT
Do not handle this unit or power cord when your hands are wet or
damp. If water or any other liquid enters the case, take this unit to
an authorized service center for inspection.
A 5 ampere fuse is fitted in this plug. Should the fuse need to be
replaced, please ensure that the replacement fuse has a rating of 5
amperes and that it is approved by ASTA or BSI to BS1362. Check
for the ASTA mark or the BSI mark on the body of the fuse.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE
SOCKET OUTLET IN YOUR HOME, THEN THE FUSE
SHOULD BE REMOVED AND THE PLUG CUT OFF AND DIS-
POSED OF SAFELY. THERE IS A DANGER OF SEVERE
ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED
INTO ANY 13 AMPERE SOCKET.
5. Location of this unit
Place this unit in a well-ventilated location.
Take special care to provide plenty of ventilation on all sides of this
unit especially when it is placed in an audio rack. If ventilation is
blocked, this unit may overheat and malfunction.
Do not expose this unit to direct sunlight or heating units as this
unit’s internal temperature may rise and shorten the life of the
pickup.
If in any doubt, please consult a qualified electrician.
Avoid damp and dusty places and places directly affected by vibra-
tions from the speakers. In particular, avoid placing the unit on or
above one of the speakers.
Be sure this unit is placed in a horizontal position. Never place it on
its side or on a slanted surface as it may malfunction.
Do not place near tuners or TV sets.
If placed next to a TV or tuner, it may cause reception interference
resulting in some noise in the TV or tuner output.
6. Care
From time to time you should wipe the front and rear panels and the
cabinet with a soft cloth. For heavier dirt, dampen a soft cloth in a
weak solution of mild detergent and water, wring it out dry, and
wipe off the dirt. Following this, dry immediately with a clean cloth.
Do not use rough material, thinners, alcohol or other chemical sol-
vents or cloths since these could damage the finish or remove the
panel lettering.
Declaration of Conformity
We,
ONKYO EUROPE
ELECTRONICS GmbH
INDUSTRIESTRASSE 20
82110 GERMERING,
GERMANY
7. Points to remember
If this unit is brought from a cold environment to a warm one or is
in a cold room that is quickly heated, condensation may form on
the pickup, preventing proper operation. In this case, remove the
disc and leave the power ON for about one hour to remove the con-
densation.
declare in own responsibility, that the ONKYO product described
in this instruction manual is in compliance with the corresponding
technical standards such as EN60065, EN55013, EN55020 and
EN61000-3-2, -3-3.
When transporting this unit, be careful not to bump it.
GERMERING, GERMANY
A.HORIUCHI
ONKYO EUROPE ELECTRONICS GmbH
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
I High-quality sound design in concert with the concept
of “Onkyo Soundism”
Supplied accessories
Check that the following accessories are supplied with this unit.
The high-quality playback performance offers a powerful yet
musically elegant sound that “re-creates music that not only
sounds ‘beautiful’ but also echoes in the soul.”
D
IS
P
L
AY
1
5
2
4
8
7
0
3
R
+
E
P
I AccuPulse D/A converter with Single-bit PWM (Pulse
Width Modulation) technology
10
6
E
A
T
PEAK
M
EM
O
SE
9
AR
R
Y
CH
S
NEXT
ECTIO
EL
C
L
E
A–
B
A
R
N
R
S
TIME ED
E
H
MO
U
F
F
T
L
E
E
IT
C
O
N
TR
O
L
L
E
R
R
C
-4
0
2
C
The D/A converter uses AccuPulse D/A conversion with Single-
bit PWM (Pulse Width Modulation) technology that generates
zero cross-distortion and improves non-linearity to achieve high-
quality sound.
Audio connection cable ×1
Remote controller × 1
I Two optical digital outputs
You can connect up to two digital recording devices, such as a
DAT deck and an MD recorder.
I Peak search (Remote controller only)
I Next selection (Remote controller only)
I Memory and Memory reverse
cable × 1
Batteries (size AA, R6 or UM-3) × 2
The Memory function enables you to select tracks to play; the
Memory reverse function enables you to easily specify tracks
you did not wish to play.
I 36-Track Random Memory (Remote controller only)
I Five mode repeat function: entire side, single track, A-B,
memory and shuffle (Remote controller only)
I 10-key direct track access (Remote controller only)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before operating this unit
Installing the remote controller batteries
1. Remove the battery compartment cover by opening it as shown in
the illustration.
1
2. Insert two AA (R6- or UM-3)-size batteries into the battery compart-
ment. Carefully follow the polarity diagram (positive (+) and nega-
tive (–) symbols) inside the battery compartment.
3. After batteries are installed and seated correctly, replace the com-
partment cover.
Notes
• Do not mix new batteries with old batteries or different kinds of
batteries.
2
3
• To avoid corrosion, remove the batteries if the remote controller
is not to be used for a long time.
• Remove dead batteries immediately to avoid damage from cor-
rosion. If the remote controller doesn’t operate smoothly,
replace both the batteries at the same time.
• The life of the batteries supplied is about six months but this
will vary depending on usage.
Using the remote controller
Point the remote controller toward the remote control sensor.
Notes
• Place the unit away from strong light such as direct sunlight or
inverted fluorescent light which can prevent proper operation of the
remote controller.
DX-7333
Remote
• Using another remote controller of the same type in the same
room or using the unit near equipment which uses infrared rays
may cause operational interference.
control sensor
• Do not put any object such as a book on the remote controller.
The buttons of the remote controller may be pressed by mistake
and drain the batteries.
• Make sure the audio rack doors do not have colored glass. Plac-
ing the unit behind such doors may prevent proper remote con-
troller operation.
30˚
30˚
DI
SP
LA
Y
1
4
2
6
7
0
5
9
3
+10
8
REP
EA
T
PE
AK
E
MO
SE
AR
CH
RY
S
E
N
E
CL
EAR
A–
L
E
C
X
T
B
TIO
N
REM
S
T
IM
approx. 5 m
(16 feet)
HU
OTE
F
E
D
IT
LE
CO
NT
RO
LLE
R
R
C-4
02C
• If there is any obstacle between the remote controller and the
remote control sensor, the remote controller will not operate.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting other components
• Do not plug in the AC power cord until all other connections have been made.
• For output jacks, the jack marked R corresponds to the right channel, and the jack marked L to the left channel. Refer to the
amplifier’s instruction manual for further information on connections.
• Avoid bundling the audio connection cables with the power cord or speaker cables. Doing so may degrade sound reproduction.
• Insert the plugs and connectors securely. Remember that improper connection can result in noise, poor performance, or dam-
age to the equipment.
Improper
connection
Protection caps are attached to the DIGITAL OUTPUT OPTICAL
jacks. Remove the cap for the jack you wish to use when connect-
ing the DX-7333 to digital equipment. Replace the caps if you are
Insert
completely
not using the DIGITAL OUTPUT OPTICAL jacks.
ANALOG
OUTPUT
DIGITAL OUTPUT
AVIS
REMOTE
CONTROL
WARNING
OPTICAL
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
COMPACT DISC PLAYER
MODEL NO. DX-7333
L
R
2-1, NISSHIN-CHO, NEYAGAWA-SHI,OSAKA,
JAPAN
MANUFACTURED IN MALAYSIA
1
3
4
2
Audio connection cable
Connecting an Onkyo product
with connectors enables you
to use the System function.
To AC outlet
cable
Optical fiber cable
(not included)
L
R
CD jack
jack
OPTICAL IN jack
OPTICAL IN jack
Amplifier without
digital inputs
MD player, DAT, etc.
with digital inputs
Amplifier, Tuner amplifier,
etc. with digital inputs
A Connection with the amplifier
TUNER
Connect the DX-7333 to the CD jacks of your amplifier.
B Connection via the digital output jack (DIGITAL
OUTPUT OPTICAL)
Connection to digital equipment, such as an MD recorder or
DAT.
DX-7333
Use an optical cable to connect this unit to the digital input
(optical) jack of an MD recorder or DAT in order to make dig-
ital recordings. The optical cable should have connectors
which fit into the digital jacks.
AMPLIFIER
C Connections for remote control
When the DX-7333 is connected to an amplifier with the Onkyo
jack, pressing the CD operation button on the amplifier’s
remote controller enables you to operate the CD player.
TAPE DECK
ONKYO
Note:
• The upper and lower
remote control jacks have the
same function.
• Remote control operation is not possible when only the
remote control cable is connected – the audio cables must
also be connected.
D Connecting the AC power cord and turning the
power on
• An
cable equipped with a 1/8" (3.5mm) diameter min-
1. Insert the AC power cord into a wall outlet.
iature two-conductor phone plug is included with the DX-
7333 and with every tuner or cassette tape deck with the
symbol.
2. Press the POWER button.
The display will light.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing CDs
PAUSE
STOP
PLAY
DISPLAY
Disc tray
POWER
1
4
2
5
8
0
3
6
9
REPEAT
MEMORY
CLEAR
LINEAR SINGLE Bit D/A CONVERTER
POWER
PAUSE
STOP
PLAY
ON OFF
PHONES
PHONES LEVEL
7
MEMORY
CLEAR
DISPLAY
MIN
MAX
NEXT
SELECTION
-
COMPACT DISC PLAYER DX 7333
+10
TIME EDIT
PEAK SEARCH A–B
SHUFFLE
Open/close
TROLLER
RC-402C
Normal play
Remote controller
1
3
2
POWER
1. Press the POWER button to turn on the power.
2. Press the (Open/close) button.
ON OFF
3. Put the disc in the disc tray, with the label side of the disc
facing up.
4. Press the button.
5. Press the
PLAY button.
Label side
The CD player will play the first track (track 1).
* If you want to, you can skip step 4 by pressing the
PLAY
POWER
PAUSE
STOP
PLAY
O
N
O
F
F
PHONES
PHONES LEVEL
MEMORY
CLEAR
DISPLAY
button instead of the button. The disc tray will close auto-
matically and play track 1.
MIN
MAX
COMPACT DISC PLAYER DX-7333
If the CD player does not start playing when the
is pressed:
PLAY button
• The disc may be upside down in the tray. Press the button to
open the disc tray. If you cannot read the label on the disc, turn
the disc over.
4
• Moisture may have formed inside the CD player. Remove the
disc from the disc tray and leave the power on for about one
hour to evaporate the moisture.
TRACK
1
6
2
7
3
8
4
9
5
DISC
10
Using the timer for play
OVER
Remote controller
12
11
TOTAL REMAIN
The CD player starts playing the loaded CD automatically as soon
as power is supplied. Using this feature, you can enjoy timer play
using your audio timer. For instructions on how to set the timer, see
the instruction manual supplied with the timer.
5
Contents of the display
PLAY
• Before starting play after you have inserted a disc
a
b
The total number of tracks on the disc
All of the track numbers on the disc (When the number of tracks
exceeds 20, the OVER indicator lights.)
TRACK
1
6
2
7
3
8
4
5
DISC
9
10
12
11
NEXT
Remote controller
SINGLE ELAPSED
c
The total playing time of the disc
• After starting play
d
e
The track number currently being played
The next track number
f The elapsed time of the current track
The display can be changed by pressing the DISPLAY button.
Remote controller
Stopping play
STOP
Press the
STOP button.
Stopping play temporarily
Remote controller
PAUSE
Press the
The PAUSE indicator will light.
PAUSE button.
PAUSE
To resume play, press the
PLAY button or the
PAUSE but-
ton. The PAUSE indicator will turn off.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing CDs
PLAY
DISPLAY
DISPLAY
PHONES
PHONES LEVEL
,
,
LINEAR SINGLE Bit D/A CONVERTER
POWER
PAUSE
STOP
PLAY
1
4
2
5
8
0
3
6
9
REPEAT
MEMORY
CLEAR
ON OFF
PHONES
PHONES LEVEL
MEMORY
CLEAR
DISPLAY
MIN
MAX
-
7
1 – 9, 0, +10
COMPACT DISC PLAYER DX 7333
NEXT
SELECTION
+10
TIME EDIT
PEAK SEARCH A–B
SHUFFLE
DISPLAY
/
,
/
ONTROLLER
RC-402C
Listening with the headphones
PAUSE
STOP
PLAY
• Plug the headphones with a standard binaural (stereo) plug into
the PHONES jack, and then adjust the sound level using the
PHONES LEVEL knob.
PHONES
PHONES LEVEL
DISPLAY
MIN
MAX
• Turn the knob clockwise to increase the sound level; turn it
-
ACT DISC PLAYER DX 7333
counterclockwise to decrease the sound level.
DISPLAY button
DISPLAY
TOTAL REMAIN
Press the DISPLAY button during play to switch the time display
among the following three modes:
a
TOTAL REMAIN: Shows how much playing time is left for
the entire disc.
SINGLE ELAPSED: Shows how long the current track has
been playing.
SINGLE REMAIN: Shows how much time is left for the track
currently playing.
SINGLE ELAPSED
SINGLE REMAIN
Remote controller
DISPLAY
b
c
Search play
Remote controller
Hold down the
/
or
/
button (or the
or
button on the remote controller) during play.
Release your finger when the music you would like to listen to is
reached. The music will start playing from that point.
Skip play
Remote controller
Remote controller
1. Each time the
controller) is pressed, the pickup will advance one track; and
each time the button (or the button on the remote
/
button (or the
button on the remote
/
controller) is pressed, the pickup will go back one track. Press
these buttons until the desired track number is selected.
PLAY
2. Press the
When the
PLAY button to begin play.
button (or the
/
button on the remote
controller) is pressed once while playing, the pickup will return
to the beginning of the current track and play it.
1
4
2
5
8
0
3
6
9
Starting play from a given track
(Remote controller only)
Remote controller
1. Select the track number you wish to play, using the number
buttons and the +10 button.
7
2. The CD player starts playing automatically.
+10
• The +10 number button is used to select a track with a number
of 10 or higher. For example, to select Track Number 30, press
this button three times, and then press 0.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing CDs
DISPLAY
1
4
2
5
8
0
3
6
9
REPEAT
MEMORY
CLEAR
REPEAT
7
NEXT
SELECTION
+10
TIME EDIT
PEAK SEARCH A–B
SHUFFLE
SHUFFLE
A
-B
ONTROLLER
RC-402C
Full repeat
Repeating play (Remote controller only)
Remote controller
Press the REPEAT button to enter the repeat play mode.
Repeat play can be used in conjunction with normal, memory, and
shuffle play modes.
REPEAT
REPEAT
Full repeat (Repeating all tracks on a disc)
Press the REPEAT button once.
During normal play
When the last track on the CD finishes, the CD player starts
playing from the first track on the CD.
During memory play
Single repeat
Remote controller
When the last track in memory finishes, the CD player starts
playing from the first track in memory.
During shuffle play
REPEAT
1
REPEAT
When the last track in shuffle play finishes, the CD player starts
playing the CD again, in a different order.
Twice
• Press the REPEAT button to cancel repeat play. The REPEAT
indicator will turn off.
Block repeat
Single repeat
Remote controller
Press the REPEAT button twice.
Before starting play
1
Flashes
A–B
A
A
B
B
The CD player will play the first track repeatedly.
During play
The CD player will play the current track repeatedly.
• Press the REPEAT button to cancel repeat play. The REPEAT
indicator will turn off.
2
Remote controller
Block repeat (Repeating a block of music)
You can repeatedly play a part between the start and end points
specified with the A-B button.
Follow the procedure below while a CD is playing.
1. Press the A-B button at the beginning of the block repeat.
(Point A)
A–B
Lights
A–B
A–B
2. Press the A-B button at the end of the block repeat. (Point B)
The section between A and B will be played repeatedly.
1
2
Note:
You can specify A and B points beyond a track.
This function is not available during memory play, repeat play (full
repeat and single repeat), shuffle play, and time edit play.
Point A
Point B
• Press the A-B button once again to cancel block repeat play.
Shuffle play (Remote controller only)
Press the SHUFFLE button.
In shuffle play mode, the CD player will play the tracks in random order.
• The auto space function will insert 3 seconds of blank time
between tracks during shuffle play. Play automatically begins.
• This function can be used in memory mode. In this case, the
programmed tracks are played at random.
Remote controller
SHUFFLE
SHUFFLE
Press the SHUFFLE button to cancel shuffle play. The SHUFFLE
indicator will turn off.
Note:
In shuffle play repeat mode, when all of the tracks have been played
once, play will be repeated with a different track progression.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the memory function
• Up to 36 tracks can be stored in memory.
STOP
PLAY
DISPLAY
LINEAR SINGLE Bit D/A CONVERTER
POWER
PAUSE
STOP
PLAY
1
4
2
5
8
0
3
6
9
REPEAT
MEMORY
CLEAR
ON OFF
PHONES
PHONES LEVEL
MEMORY
CLEAR
DISPLAY
MIN
MAX
-
COMPACT DISC PLAYER DX 7333
MEMORY
CLEAR
7
NEXT
SELECTION
+10
TIME EDIT
CLEAR
MEMORY
/
,
/
PEAK SEARCH A–B
SHUFFLE
1 – 9, 0, +10
RECONTROLLER
RC-402C
Storing a program into memory and playing it
Remote controller
1
2
MEMORY
MEMORY
1. Press the MEMORY button.
MEMORY
2. Select the desired track number, using the
tons and press the MEMORY button.
and
but-
To enter further track numbers into memory, repeat this proce-
dure. You can store maximum of 36 tracks in memory.
Remote controller
If you use the remote controller, press the number buttons to
select the desired track.
1
2
5
8
0
3
6
9
3. When you press the
PLAY button, the CD player will
4
play the tracks in the order you selected.
7
Note:
• If more than 36 tracks are selected, “FL” will flash in the mem-
ory channel display area to indicate that the memory is full.
• If the MEMORY button is pressed during play, the current track
being played is stored in memory.
+10
MEMORY
Contents of the display
TRACK
1
6
2
7
3
8
4
5
Example: After storing tracks 2, 3, 5, 6, 9 and 12 in memory.
MEMORY
DISC
9
10
• Before starting play
12
11
TOTAL REMAIN
a
MEMO CH
The selected track numbers
b
c
Memory channel
The total playing time of selected tracks
• During play
d
Track number 2 is currently being played (the first track in
memory).
3
Remote controller
PLAY
e
Next track number in memory
f Time elapsed in track currently playing
g
The remaining track numbers in memory
TRACK
2
3
5
MEMORY
DISC
6
9
12
NEXT
SINGLE ELAPSED
Stopping a memory play
Remote controller
STOP
Press the
STOP button.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the memory function
Memory reverse function
Remote controller
MEMORY
MEMORY
When track numbers 2, 4, 6, 8 and 10 have been stored in memory,
Press the MEMORY button.
All tracks which have not been stored in memory will be stored in
memory, replacing the previous contents. When you press the
PLAY button, the CD player will start playing.
TRACK
1
2
7
3
4
9
5
MEMORY
DISC
6
8
10
TOTAL REMAIN
MEMO CH
TRACK
1
6
2
7
3
8
4
9
5
MEMORY
DISC
10
TOTAL REMAIN
MEMO CH
Clearing the last track stored
Remote controller
Press the CLEAR button.
CLEAR
CLEAR
The last track programmed in memory is cleared.
Canceling the memory play
Remote controller
STOP
Press the
STOP button while the CD player is in stop mode.
The contents of the memory are completely cleared.
SPACE indicator
A 3-second silence will be automatically added between tracks dur-
ing memory play (the SPACE indicator will flash). However, dur-
ing normal sequential play this space will not be inserted.
SPACE
Checking what is stored in memory
1
2
TRACK
1
6
2
7
3
8
4
9
5
1. When the CD player stops during memory play, the last pro-
gram number stored in memory will be shown in the dis-
play.
MEMORY
DISC
10
12
11
MEMO CH
SINGLE REMAIN
2. When you press the
button, the display will show each
track number stored in memory, in turn.
The selected track numbers
a
Remote controller
b
c
Memory channel and stored track number in memory channel
The playing time of track
TRACK
1
2
3
4
5
MEMORY
DISC
6
7
8
9
10
12
11
MEMO CH
SINGLE REMAIN
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Functions
DISPLAY
,
1
4
2
5
8
0
3
6
9
REPEAT
MEMORY
CLEAR
1 – 9, 0, +10
7
TIME EDIT
NEXT
SELECTION
+10
TIME EDIT
PEAK SEARCH A–B
SHUFFLE
NEXT SELECTION
NTROLLER
RC-402C
Remote controller
Selecting the next track for play
(Remote controller only)
1
NEXT
SELECTION
NEXT
1. During playback, press the NEXT SELECTION button.
2. While the “– –” is flashing, select the next desired track
using the number buttons and the +10 button.
Remote controller
After playing the current track, the selected track will be played.
2
1
2
5
8
0
3
6
9
Note:
4
The Memory Play or the Shuffle Play mode, if appropriate, will be
canceled before the playing of the specified track begins.
7
+10
Time edit function (Remote controller only)
Remote controller
1
TIME EDIT
This function can be used when recording from a CD to a cassette
tape.
Make sure that you cancel the memory mode before using this
function.
1. Press the TIME EDIT button.
1
6
2
7
3
8
4
5
• Pressing this button will change the Track Number display from
46 → 50 → 54 → 60 → 70 → 80 → 90 → 46 → .....
These numbers indicate the length of the tape.
DISC
TIME EDIT
TOTAL REMAIN
a
Tape length.
b
The track numbers to be recorded onto side A will be displayed
in a box.
c
This is the total time for the tracks on side A. This changes to
the display for side B ( ) after 2 or 3 seconds. Pressing the
DISPLAY button will show the display for the A side again.
Remote controller
1
2
5
8
0
3
6
9
Remote controller
4
• Each time the
/
buttons are pressed, the tape length will
or
change by 1 minute.
7
• Use number buttons and + 10 button to directly enter the length
of the tape.
The maximum setting is 99 minutes.
+10
2. Press the
button.
The CD player starts playing from the first track on the disc to
be recorded onto side A.
When the last track on side A is completed, the pause mode is
automatically set.
2
3
Remote controller
3. Press the
button again.
PAUSE
The pause mode is canceled and the CD player starts playing the
remaining tracks for recording onto side B.
Note:
• The time edit mode does not function for discs with more than
20 tracks, or when the first track is longer than half the indicated
length of the tape.
Remote controller
• During time edit play, buttons other than STOP, Open/close,
DISPLAY and number buttons cannot be used for input.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Functions
DISPLAY
1
4
2
5
8
0
3
6
9
REPEAT
MEMORY
CLEAR
7
NEXT
SELECTION
+10
TIME EDIT
PEAK SEARCH A–B
SHUFFLE
A–B
PEAK SEARCH
NTROLLER
RC-402C
Peak search (Remote controller only)
1
Remote controller
PEAK SEARCH
This function searches for the peak sound level on the disc.
When using the memory mode, press the MEMORY button to
return to normal mode.
1. Press the PEAK SEARCH button.
• The CD player checks the disc for the highest sound level. The
PEAK SEARCH indicator will flash during this operation.
When the search is complete, the indicator will light.
Flashes
Lights
PEAK SEARCH
PEAK SEARCH
2. Press the A-B button.
“P” appears in the memory channel display area and flashes.
3. Press the
button.
• The section of the disc with the highest sound level will be
played repeatedly for 6 seconds. Refer to this level when record-
ing the disc onto a cassette tape.
2
3
4
Remote controller
4. Press the
button.
A–B
The CD player stops.
• This level is stored until the button is pressed or the power is
turned off. To repeat the 6-seconds playback of the peak level,
follow steps 2, 3, and 4 when the CD player is stopped.
• Pressing the PEAK SEARCH button will turn off the PEAK
SEARCH indicator and the level will be cleared from the
memory.
Remote controller
• Pressing the A-B button after pressing the
button will start
the block repeat operation.
Note:
Depending on the disc playing, memorizing of a level which is not
the maximum audible level could occur. This is due to the CD
player’s microprocessor memorizing inaccurate information
because of flaws in the disc itself, or recording conditions. Under
such circumstances, the recording level for the cassette tape may be
very low, or else distortion or similar symptoms could arise on
account of excessively high signal levels. To avoid this, be sure to
reset the recording level of the cassette deck if such symptoms
occur.
Remote controller
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Control positions and names
Note:
If there is a protective film on the surface of the display, making it difficult to read the display, remove it.
For more information about the function of a particular button, please turn to the page listed in the brackets ([ ]) following each name.
Front panel
1
2
3
4
5
6
7
8
LINEAR SINGLE Bit D/A CONVERTER
POWER
PAUSE
STOP
PLAY
ON OFF
PHONES
PHONES LEVEL
MEMORY
CLEAR
DISPLAY
MIN
MAX
-
COMPACT DISC PLAYER DX 7333
14 13
12
11
10
9
a
b
c
d
e f
g
Display
PEAK SEARCH SHUFFLE
TRACK
1
6
2
7
4
9
5
3
1
REPEAT
PAUSE
A
B
SPACE MEMORY
DISC
8
10
15
20
TIME EDIT OVER
12
17
13
18
14
19
11
16
TOTAL REMAIN
SINGLE ELAPSED
SINGLE REMAIN
NEXT
MEMO CH
m
l
k
j
i
h
Front panel
Display
1. POWER button [7]
2. Remote control sensor [5]
3. Disc tray [7]
a. Track number display
b. REPEAT indicator
c. Block repeat indicator
d. PEAK SEARCH indicator
e. SPACE indicator
f. SHUFFLE play indicator
g. MEMORY indicator
h. Music calendar display
i. OVER indicator
4. Display (Refer to the “Display” illustration.)
5. Open/close button [7]
6. PAUSE button [7]
7. STOP button [7, 11]
8. PLAY button [7, 10]
9. PHONES LEVEL knob [8]
10. PHONES jack [8]
j. Time display
k. TIME EDIT indicator
l. PAUSE indicator
11. Skip/Search buttons [8, 10]
12. DISPLAY button [8]
m. Next track number/memory channel display
13. CLEAR button [11]
14. MEMORY button [10, 11]
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Control positions and names
Remote controller
1. Open/close button [7]
2. CD operation buttons
: Pause button [7]
DISPLAY
: Stop button [7, 11, 13]
: Play button [7, 10, 12, 13]
: Fast reverse button [8]
: Fast forward button [8, 11]
: Reverse skip button [8, 12]
: Forward skip button [8, 12]
1
6
7
2
3. Number buttons and +10 button [8, 10, 12]
4. PEAK SEARCH button [13]
5. A-B button [9, 13]
1
4
2
5
8
0
3
6
REPEAT
MEMORY
CLEAR
6. DISPLAY button [8]
8
9
3
7
9
7. REPEAT button [9]
8. MEMORY button [10, 11]
9. CLEAR button [11]
NEXT
+10
SELECTION TIME EDIT
10
10. TIME EDIT button [12]
11. NEXT SELECTION button [12]
12. SHUFFLE button [9]
PEAK SEARCH A–B
SHUFFLE
11
12
4
5
REMOTE CONTROLLER
RC-402C
Precautions for handling the Compact Disc (CD)
Important note on handling CDs
Playable discs
1. Carefully lift the disc from the disc case, making sure to hold
the disc by its edges or the hole in the middle.
This unit can play back the following discs.
Disc mark Contents Disc size Maximum playback time
12 cm
74 minutes
Audio
CDs
Audio
8 cm
(CD single)
20 minutes
You cannot play back discs other than those listed above.
Do not use discs that are not audio discs (e.g. CD-ROMs for use
with personal computers), as these could damage the speakers and
amplifier.
2. A dry, soft cloth may be used to wipe dust and fingerprints
off the surface of CDs.
Do not use volatile agents on discs, such as thinner or ben-
zine. Also, do not use conventional record cleaner or anti-
static agents.
Avoid using heart-shaped or octagonal discs. playing irregularly
shaped discs may damage the internal mechanism of the unit.
Do not use discs on which adhesive from adhesive tape or a disc
label (if it is a rental disc) remains.
Otherwise, you may not be able to eject the discs or the unit may
become inoperative.
• Do not place a CD in direct sunlight or locations subject to high
humidity or low temperature.
• Do not store a CD in this unit tray for a long period of time.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide Specifications
• No power.
Signal readout system:
Reading rotation:
Optical non-contact
About 500 - 200 r.p.m.
(constant linear velocity)
1.2 - 1.4 m/s
Cross Interleave Reed-Solomon code
Single-bit PWM (Pulse Width Mod-
ulation)/AccuPulse
352.8 kHz (8 times oversampling)
2 (stereo)
5 Hz - 20 kHz
0.005% (at 1 kHz)
96 dB
90 dB
85 dB (at 1 kHz)
Cause: Power cable is not properly plugged into the AC outlet.
Remedy: Insert the power plug firmly.
Linear velocity:
Error correction system:
D/A converter:
• A disc is loaded in the disc tray, but playback will not start.
Cause: A disc in the disc tray may be upside down.
Remedy: Load the disc with the label facing upward.
Cause: The disc is dirty.
Remedy: Clean the disc.
Sampling frequency:
Number of channels:
Frequency response:
Total harmonic distortion:
Dynamic range:
Signal-to-noise ratio:
Channel separation:
Wow and Flutter:
Cause: Moisture has accumulated inside the CD player.
Remedy: Remove the disc from the disc tray, place the CD
player in a warm place, and leave the power on for
about one hour.
• No sound is heard.
Cause: Connections may be incomplete or incorrect.
Remedy: Check all cable connections. Insert all the plugs
firmly into the jacks.
Below threshold of measurability
2 volts r.m.s.
9 watts
Output level:
Power consumption:
Power supply:
Cause: The input selector switch on the amplifier may be set
incorrectly.
230-240 V, 50 Hz
Remedy: Set the switch to the proper position. See your
amplifier’s operating instructions for more informa-
tion.
Dimensions (W × H × D):
435 × 91 × 314 mm
(17-1/8" × 3-9/16" × 12-3/8")
4.0 kg (8.8 lbs.)
Weight:
• Disc playback skips.
Cause: The disc is dirty.
Remedy: Clean the disc.
Cause: A disc is scratched.
Specifications and features are subject to change without notice.
Remedy: Replace the disc.
Cause: The CD player is subject to being accidentally bumped.
Remedy: Place the CD player in a more stable location.
• Search time (when locating a specific track) is extremely long.
Cause: The disc is dirty.
Remedy: Clean the disc.
Cause: The disc is scratched.
Remedy: Replace the disc.
• Track numbers cannot be stored in memory.
Cause: No disc in the tray.
Remedy: Load a disc in the tray.
Cause: You have entered a track number that does not exist on
the disc.
Remedy: Use only the track numbers that exist on the disc.
• Front panel controls function correctly, but remote control-
ler does not.
Cause: No batteries in remote controller.
Remedy: Insert batteries.
Cause: Batteries have worn out.
Remedy: Replace batteries.
This unit contains a sensitive microcomputer, which under certain
circumstances might fail to operate due to excessive noise interfer-
ence. In such case, switch off the main power by pressing the
POWER switch, wait five seconds, then switch it on again.
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
ONKYO U.S.A. CORPORATION
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
ONKYO EUROPE ELECTRONICS GmbH
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
ONKYO CHINA LIMITED
Units 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung,
HOMEPAGE
SN 29343067
E
I0104-1
Download from Www.Somanuals.com. All Manuals Search And Download.
|