iConverter
iConverter®2GXM2
1000BASE-X SFP to 1000BASE-X SFP Media Converter and Network Interface Device
Plug-in
The iConverter® 2GXM2 conforms to the Ethernet in the First
Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan
and Enterprise LAN networks. The 2GXM2 provides intelligent,
securely managed service demarcation at the customer premises,
offering Quality of Service and enhanced Bandwidth Control (rate-
limiting) capabilities. The 2GXM2 features built-in Operations,
Administration and Maintenance (OAM) with comprehensive
performance monitoring, fault detection and provisioning.
Tabletop
Wall-Mount
The 2GXM2 is available as a compact standalone unit or as a
chassis plug-in module. The hot-swappable 2GXM2 plug-in
module can be mounted in a 19 or 5-Module chassis with any
combination of redundant AC and DC power supplies. It can
also be mounted in a 2-Module AC or DC powered chassis, or
in a 1-Module chassis with AC or DC power input.
„ Carrier-Grade optical Ethernet Network Interface Device
„ Integrated SNMPv1, SNMPv2c, SNMPv3 and IP-less
The plug-in module can manage other modules in the same
chassis and operate as a managed gigabit fiber-to-fiber converter.
It features two Gigabit Ethernet backplane ports for connectivity
to adjacent modules in a chassis for multi-port and multi-service
configurations.
802.3ah management
„ 802.3ah Link OAM for early fault detection and
performance monitoring
„ VLAN with 802.1ad Q-in-Q for E-Line and E-LAN services
„ Quality of Service for Voice/Data/Video over Ethernet
„ Bandwidth control (rate limiting) with 64Kb increments
The standalone 2GXM2 is available as a tabletop or wall-mount
unit. The tabletop model can be DIN-rail mounted using an
optional DIN-rail mounting kit. Both the tabletop and the
wall-mount models are DC powered and are available with an
external AC/DC power adapter or a terminal connector for DC
power. The 2GXM2 standalone unit combines management
capability with a compact chassis for deployment at the
demarcation point.
„ Port MIB statistics and optical performance statistics to
support Service LevelAgreements
„ PortAccess Control for enhanced security
„ 10,240 byte Jumbo frames
„ Layer 2 Control Protocol (L2CP) Policy Control
„ Configurable Link Fault Propagation modes
iConverter fiber access Network Interface
Devices and media converters are MEF 9 and
14 certified compliant and NEBS Level 3
compliant. iConverter NIDs enable
Carrier-Grade Optical Ethernet with reliability
and performance monitoring to support Service
LevelAgreements (SLAs).
„ Small Form Pluggable (SFP) transceivers with Optical
Statistics for standard or CWDM applications
„ Auto-negotiation of duplex modes and pause capabilities
„ Commercial (0 to 50OC), wide (-40O to 60OC) and
extended (-40O to 75O C) temperature ranges
The modular design of iConverter fiber access
equipment future-proofs Metro Ethernet
services with scalability of network services
and lowers operating costs with
comprehensive OAM management and
provisioning.
„ MEF 9 and 14 Certified Compliant
„ NEBS Level 3 Compliant
„ Lifetime Warranty and free 24/7 Technical Support
Download from Www.Somanuals.com. All Manuals Search And Download.
A management processor on the iConverter 2GXM2 in the
19-Module Chassis isolates the encrypted management data
from the customer data and communicates with the NMM via a
separate management backplane bus. Management traffic on
the user data lines is IP-less and carried on a securely encrypted
data channel to protect the management from unauthorized
access. The chassis at the Central Office requires only a single
IP address to manage itself and all of the connected remote
chassis managed by the Remote OAM channel. This is the
ideal configuration for networks that separate secure
management traffic from the service (customer) traffic on different
networks, or when management IP addresses are at a premium.
The 2GXM2 has integrated management, eliminating the cost
and space required for external management hardware.
The iConverter management system provides comprehensive
remote configuration and performance monitoring. iConverter
management reduces operational expenditures by keeping truck
rolls to a minimum through remote provisioning, unidirectional
fault detection, trap notification and loopback capabilities.
iConverter management is available out-of-band via IP-Less
protocol using the 802.3ah OAM channel or Omnitron’s Secure
OAM channel, or in-band using SNMP or Telnet.
Management is accessed via Omnitron’s NetOutlook® SNMP
Network Management Software with an intuitive Graphical User
Interface, or third party SNMP software. Telnet and CLI
management interfaces are also supported, and utilize an easy
to use, menu-driven interface. The CLI interface is accessed via
a Serial Console Port, that provides local configuration and allows
for firmware updates. Additionally, the port can be connected to
a serial modem to provide an alternative remote management path.
Description
Protocols
1000BASE-X to 1000BASE-X Fiber
Media Converter and Network Interface Device
1000BASE-X
with 10,240 bytes max. frame size
Fiber Cables
Multimode: 50/125, 62.5/125, 100/140µm
Single-mode: 9/125µm
Serial Cable
RS-232, 22 to 24 AWG, 12 to 50 pF/ft.
Small Form Pluggable (SFP)
IP-Based Management
Fiber Connectors
Serial Connector
The 2GXM2 can be managed through IP protocols, SNMPv1,
SNMPv2c, SNMPv3 and Telnet. The IP address of the 2GXM2
can be user-defined or resolved through the DHCP host on the
network. The IP protocols for management access can be
enabled or disabled individually or as a group. Access to the
management is protected by password authentication. SMNPv3
strengthens secure access to devices by a combination of
authenticating and encrypting packets over the network.
Management VLAN can also be defined to separate
management traffic from customer traffic.
Mini DIN-6 female,
mini DIN-6 male to DB-9 female adapter included
Controls
DIP-Switches and LEDs
DC Power
Plug-In Module: 1.1A @ 3.3VDC
Standalone: 8-15VDC,
0.5A @ 9VDC
DC Power Connector
Plug-In: Power supplied by backplane
Standalone: 2.5mm Barrel Connector or
Field-wireable Terminal Connector
AC Power Adapter
[US]
Plug-In Module: N/A
Standalone: 100-120VAC/60Hz
0.05A @ 120VAC
802.3ah and Secure OAM Management Channels
When utilizing a Remote OAM management channel (Secure
IP-less or 802.3ah), the NID at the Customer Premises is
securely managed by its fiber link partner located at the Central
Office or Point of Presence. The management network IP
address is not available to the customer network and is isolated
by the iConverter Network Management Module (NMM) in the
19-Module Chassis at the Central Office.
AC Power Adapter
[Universal]
Plug-In Module: N/A
Standalone: 100-240VAC/50-60Hz
0.05A @ 120VAC
Dimensions
Plug-In Module: W:0.85" x D:4.5" x H:2.8"
Standalone: W:3.1" x D:4.8" x H:1.0"
Wallmount: W:3.8" x D:4.8" x H:1.0"
Weight
without power adapter
Plug-In Module: 8oz.
Standalone: 1 lb.
Weight
with power adapter
Plug-In Module: N/A
Standalone: 1.5 lb.
Compliance
UL, CE, FCC Class A, MEF 9, MEF 14
Telnet; SNMPv1, SNMPv2c, SNMPv3
IP-Based Management
Temperature
Standard Operating: 0 to 50º C
Wide Operating: -40 to 60º C
Extended Operating: -40 to 75º C
Storage: -40 to 80º C
Humidity
5% to 95% (non-condensing)
-100m to 4000m (Operational)
Altitude
MTBF (Hours)
Plug-In Module: 540,000
Standalone without Power Adapter: 540,000
Standalone With Power Adapter: 250,000
Download from Www.Somanuals.com. All Manuals Search And Download.
Page 3
8 9 9 9 N - 0 - x x
<Blank> Plug-In Module
Standard Operating Temperature Range Model
Wide Operating Temperature Range Model
Extended Operating Temperature Range Model
<Blank>
A
B
C
D
E
F
Tabletop with External US AC Power Supply
Tabletop with External Universal AC Power Supply
W
Z
Tabletop with DC Terminal Power
Wall-Mount with External US AC Power Supply
Wall-Mount with External Universal AC Power Supply
Wall-Mount with DC Terminal Power
SFP Ordering Information
Tx
Rx
Min. Tx
Power
[dBm]
Max. Tx
Power
[dBm]
Min. Rx
Sense
[dBm]
Max. Rx
Power
[dBm]
Min.
Attenuation
(dBm)
Link
Budget
(dB)
Model
Number
Fiber Type
Distance
Wavelength
[nm]
Wavelength
[nm]
Gigabit Ethernet
MM
220m / 550m
15km
7206-0
7207-1
7214-1
7215-1
7214-2
7215-2
850
850
-10
-4
-3
-3
-3
0
-17
-19.5
-20
-3
-3
-3
-3
-3
-3
-
-
7
SM
1310
1310
1550
1310
1550
1310
1550
1310
1550
1310
-9.5
-9.5
-9.5
-3
10
SM-SF
SM-SF
SM-SF
SM-SF
20km
-
10.5
10.5
17
20km
-20
-
40km
-20
3
3
40km
-3
0
-20
17
*See SFP data sheet (091-17000-001) for other supported transceiver models.
For more information on the variety of SFPs available, visit Omnitron’s web site at: www.omnitron-systems.com
Trademarks are owned by their respective companies. iConverter and NetOutlook are a registered trademarks of Omnitron Systems.
Specifications are subject to change without notice. ©2008 Omnitron Systems Technology, Inc. All rights reserved.
091-8980N-001C 07/08
Download from Www.Somanuals.com. All Manuals Search And Download.
Page 4
|