Download from Www.Somanuals.com. All Manuals Search And Download.
SM
OMEGAnet On-Line Service
Internet e-mail
Servicing North America:
USA:
One Omega Drive, P.O. Box 4047
Stamford, CT 06907-0047
TEL: (203) 359-1660
ISO 9001 Certified
FAX: (203) 359-7700
FAX: (514) 856-6886
e-mail: [email protected]
Canada:
976 Bergar
Laval (Quebec) H7L 5A1
TEL: (514) 856-6928
e-mail: [email protected]
For immediate technical or application assistance:
USA and Canada: Sales Service: 1-800-826-6342 / 1-800-TC-OMEGA¨
Customer Service: 1-800-622-2378 / 1-800-622-BEST¨
Engineering Service: 1-800-872-9436 / 1-800-USA-WHEN¨
TELEX: 996404 EASYLINK: 62968934 CABLE: OMEGA
Mexico
TEL: (001)800-TC-OMEGASM
En Espa–ol: (001) 203-359-7803
FAX: (001) 203-359-7807
e-mail: [email protected]
Servicing Europe:
Benelux:
Postbus 8034, 1180 LA Amstelveen, The Netherlands
TEL: +31 (0)20 6418405
FAX: +31 (0)20 6434643
Toll Free in Benelux: 0800 0993344
e-mail: [email protected]
Czech Republic: RudŽ arm‡dy 1868, 733 01 Karvin‡ 8
TEL: +420 (0)69 6311899
FAX: +420 (0)69 6311114
FAX: +33 (0)130 699 120
e-mail: [email protected]
France:
9, rue Denis Papin, 78190 Trappes
TEL: +33 (0)130 621 400
Toll Free in France: 0800406342
e-mail: [email protected]
Germany/Austria: Daimlerstrasse 26, D-75392 Deckenpfronn, Germany
TEL: +49 (0)7056 9398-0
FAX: +49 (0)7056 9398-29
Toll Free in Germany: 0800 TC-OMEGASM
e-mail: [email protected]
United Kingdom: One Omega Drive
ISO 9002 Certified
River Bend Technology Centre
Northbank, Irlam
Manchester M44 5EX United Kingdom
TEL: +44 (0)161 777 6611
Toll Free in the UK: 0800 488 488
e-mail: [email protected]
FAX: +44 (0)161 777 6622
It is the policy of OMEGA to comply with all worldwide safety and EMC/EMI regulations that apply. OMEGA is constantly
pursuing certification of its products to the European New Approach Directives. OMEGA will add the CE mark to every
appropriate device upon certification.
The information contained in this document is believed to be correct but OMEGA Engineering, Inc. accepts no liability
for any errors it contains, and reserves the right to alter specifications without notice.
WARNING: These products are not designed for use in, and should not be used for, patient connected applications.
This device is marked with the international caution symbol. It is important to read the Setup Guide before installing or
commissioning this device as it contains important information relating to safety and EMC.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
1. General Information and Features
2. Applicable Standards
3. Installation and Removal
4. Input and Output Connections
5. Specifications
2
3
4
8
9
5.1 PS Type Labeling
5.2 Size & Weight
5.3 Mounting
5.4 Temperature Ranges
5.5 Input Range
5.6 Input Current Surge Protection
5.7 Output Voltage
5.8 Output Current
5.9 Output Ripple
5.10 Temperature Derating
5.11 Power-on Indicator
5.12 Short-circuit and overload protection
5.13 Wire Connections
6. Derating Graph
7. Block Diagram
8. Dimensions Drawing
9. Safety Considerations
12
12
13
14
1
DRN-PS Ñ DIN Rail Power Supplies
Download from Www.Somanuals.com. All Manuals Search And Download.
1
GENERAL INFORMATION AND FEATURES
The compact DRN power supplies are
designed to supply well-regulated
21.5 volt DC power to sensors, signal
conditioners, data acquisition systems and
high level logic equipment.
Significant DRN features include:
¥
¥
4kV tested isolation, primary to output
VDE-style patented shrouded
Features
double-bobbin design
PET polyester bobbins, UL 94VO
flammability rating
¥
¥
¥
¥
¥
Glass-filled polycarbonate case, UL 94VO
Recessed live parts and connector screws
Either 32mm or 35mm DIN rail mounting
Jumper-select 230V/50Hz or 115V/60Hz
input
¥
¥
¥
¥
¥
¥
¥
¥
Wide input voltage tolerances
6kA protective varistor input shunt
Input AC spike rejection with LC filters
LED power-on lamp
Output derating only above 50 degrees C
Overtemperature protection
Short circuit protection without fuses
Low-ripple, well-regulated linear design
2
DRN-PS Ñ DIN Rail Power Supplies
Download from Www.Somanuals.com. All Manuals Search And Download.
APPLICABLE STANDARDS
2
2.1 Input Voltage Tolerances
Exceeds IEC 38 range
2.2 Input / Output Isolation
4KV rms 60Hz 1 minute test
630V conductor spacing, IEC 348
Exceeds VDE551 / IEC 742 separation spacing
Exceeds VDE106 protective separation
Exceeds VDE 160 clearance distances
Exceeds VDE160 creepage distances
2.3 Protective Classes
IEC 529:
IPÐ20
VDE 106 Part 1: Class II
2.4 Flam m ability Ratings
Transformer:
Case:
UL 94VO
UL 94VO
3
DRN-PS Ñ DIN Rail Power Supplies
Download from Www.Somanuals.com. All Manuals Search And Download.
3
INSTALLATION AND REMOVAL
The DRN power supplies are heavy
enough to cause damage and or injury
if dropped during installation. Assure
firm rail mounting before releasing grip
on the unit.
Warning!
If a rail assembly is to be transported,
then disconnection, dismounting and
separate packing of the power supply is
recommended.
For units that must be shipped installed
on the rail, additional bracing to resist
transportation shocks is recommended.
Do not attempt to install or connect to
the power supply when the mains are
energized.
4
DRN-PS Ñ DIN Rail Power Supplies
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION AND REMOVAL
3
To change voltage jumpers:
1. Remove cover from case by carefully
prying up two side tabs using a
screwdriver. Remove two screws from
bottom of case. Slide unit out of case.
2. Locate the main board assembly and
position it in front of you the same
way as shown in Figure 3.1 on the
following page.
3. On the main board, locate the
transformer jumpers W1, W2, and W3
near the transformer T1.
If your power requirement is 115Vac,
jumpers W1 and W2 should be
installed. (Do not install W3.)
Warning!
If your power requirement is 230Vac,
jumper W3 should be installed. (Do not
install W1 or W2.)
5
DRN-PS Ñ DIN Rail Power Supplies
Download from Www.Somanuals.com. All Manuals Search And Download.
3
INSTALLATION AND REMOVAL
TRANSFORMER
MOUNTING PLATE
T1
SHOWN WITH
115VAC WIRING
W1
W3
W3
W2
MAIN BOARD
W2
W3
W1
W2
W1
230VAC JUMPER WIRING
115VAC JUMPER WIRING
Figure 3.1 Ñ Main Board Power Jumpers
6
DRN-PS Ñ DIN Rail Power Supplies
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION AND REMOVAL
3
installation
removal
Figure 3.2 Ñ 35mm "Top Hat"
Installation:
Hook in the module with the mounting rail guide on
the top edge of the mounting rail and lower it to lock
it into position.
Removal:
Release the spring catch with a screwdriver while
raising the module to disengage it.
7
DRN-PS Ñ DIN Rail Power Supplies
Download from Www.Somanuals.com. All Manuals Search And Download.
4
INPUT AND OUTPUT CONNECTIONS
AC
IN
DC
OUT
N
PWR
+V
N/C
RETURN
AC Line
AC Neutral
Ground
NO CONNECTION
+21.5V
Figure 4.1 Ñ Front Panel Connection Labels
shown without regulator cover
8
DRN-PS Ñ DIN Rail Power Supplies
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
5
5.1 PS Type Labeling
DRNÐPSÐ750, where 750 equals mA rating.
DRNÐPSÐ750
5.2 Size & W eight
Height:
2.76" (70mm)
2.95" (75mm)
5.95" (151mm)
2.0 lbs. (0.9 kg)
Width:
Depth:
Weight:
5.3 Mounting
35mm "top hat" DIN EN 50022
5.4 Tem perature Ranges
Operating Temperature Ranges
Storage Temperature Ranges
-20 to 60 degrees C
-40 to 95 degrees C
9
DRN-PS Ñ DIN Rail Power Supplies
Download from Www.Somanuals.com. All Manuals Search And Download.
5
SPECIFICATIONS
5.5 Input Range
115 or 230V, 49Ð61Hz
DRNÐPSÐ750
± 10%
5.6 Input Current Surge Protection
6kA/275V Varistor
5.7 Output Voltage
21.5V ± 2% - IR, where I = output current amperes and R = 0.3½
5.8 Output Current
DRNÐPSÐ750
0Ð750mA
5.9 Output Ripple
Less than 10mV pp
10
DRN-PS Ñ DIN Rail Power Supplies
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
5
5.10 Tem perature Derating
None below 50 degrees C
DRNÐPSÐ750, 15mA per degree C above 50¡C
5.11 Power-on Indicator
Front Panel red LED lamp
5.12 Short-circuit and overload protection
DRNÐPSÐ750
foldback current limiting with automatic high
temperature shutdown
no fuses required
5.13 W ire Connections
Screw down wire clamps, AWG 12 to 26 (ferrules recommended
for stranded wire).
11
DRN-PS Ñ DIN Rail Power Supplies
Download from Www.Somanuals.com. All Manuals Search And Download.
6/7
DERATING GRAPH / BLOCK DIAGRAM
1000
800
600
DRN-PS-750
75mA
I
max.
400
200
0
-5
5
15
25
35
45
60
50
¡C Ambient
Figure 6.1 Ñ Derating Graph
(+V)
L
C
AC Line
V
A
R
I
S
T
O
R
R
E
G
U
L
A
T
O
R
B
R
I
F
I
INPUT:
115/230vac
49-61Hz
D
L
G
T
E
E
21.5V
R
AC Neutral
(
)
Return
Ground
Figure 7.1 Ñ Block Diagram
12
DRN-PS Ñ DIN Rail Power Supplies
Download from Www.Somanuals.com. All Manuals Search And Download.
DIMENSIONS DRAWING
8
FASTEN RAIL UNDER
POWER SUPPLY WITH
TWO SCREWS
SPACED AS SHOWN.
3.15
[80.0]
2.95
2.76
[75.0]
[70.0]
5.95
[151.1]
MAX
Figure 8.1 Ñ Dimensions
13
DRN-PS Ñ DIN Rail Power Supplies
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY CONSIDERATIONS
This device is marked with the international Caution symbol. It is important to read this
manual before installing or commissioning this device as it contains important information
relating to Safety and EMC (Electromagnetic Compatibility).
Unpacking & Inspection
Unpack the instrument and inspect for obvious shipping damage. Do not attempt to operate
the unit if damage is found.
Note
☞
This instrument is a panel mount device protected in accordance with Class I of EN 61010
(115/230 AC power connections). Installation of this instrument should be done by Qualified
personnel. In order to ensure safe operation, the following instructions should be followed.
This instrument has no power-on switch. An external switch or circuit-breaker shall be included in the
building installation as a disconnecting device. It shall be marked to indicate this function, and it shall be
in close proximity to the equipment within easy reach of the operator. The switch or circuit-breaker shall
not interrupt the Protective Conductor (Earth wire), and it shall meet the relevant requirements of
IEC 947Ð1 and IEC 947-3 (International Electrotechnical Commission). The switch shall not be
incorporated in the mains supply cord.
Furthermore, to provide protection against excessive energy being drawn from the mains supply in case
of a fault in the equipment, an overcurrent protection device shall be installed.
¥
The Protective Conductor must be connected for safety reasons. Check that the power
cable has the proper Earth wire, and it is properly connected. It is not safe to operate this
unit without the Protective Conductor Terminal connected.
¥
¥
¥
¥
¥
Do not exceed voltage rating on the label located on the top of the instrument housing.
Always disconnect power before changing signal and power connections.
Do not use this instrument on a work bench without its case for safety reasons.
Do not operate this instrument in flammable or explosive atmospheres.
Do not expose this instrument to rain or moisture.
Note
☞
EMC Considerations
¥
¥
¥
¥
Whenever EMC is an issue, always use shielded cables.
Never run signal and power wires in the same conduit.
Use signal wire connections with twisted-pair cables.
Install Ferrite Bead(s) on signal wires close to the instrument if EMC problems persist.
14
DNR-PS Ñ DIN Rail Power Supplies
Download from Www.Somanuals.com. All Manuals Search And Download.
MADE
IN
WARRANTY/DISCLAIMER
USA
OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and
workmanship for a period of 13 months from date of purchase. OMEGA Warranty adds an additional
one (1) month grace period to the normal one (1) year product warranty to cover handling and
shipping time. This ensures that OMEGAÕs customers receive maximum coverage on each product.
If the unit should malfunction, it must be returned to the factory for evaluation. OMEGAÕs Customer
Service Department will issue an Authorized Return (AR) number immediately upon phone or written
request. Upon examination by OMEGA, if the unit is found to be defective it will be repaired or replaced
at no charge. OMEGAÕs WARRANTY does not apply to defects resulting from any action of the
purchaser, including but not limited to mishandling, improper interfacing, operation outside of design
limits, improper repair, or unauthorized modification. This WARRANTY is VOID if the unit shows
evidence of having been tampered with or shows evidence of being damaged as a result of excessive
corrosion; or current, heat, moisture or vibration; improper specification; misapplication; misuse or other
operating conditions outside of OMEGAÕs control. Components which wear are not warranted, including
but not limited to contact points, fuses, and triacs.
OMEGA is pleased to offer suggestions on the use of its various products. However,
OMEGA neither assumes responsibility for any omissions or errors nor assumes liability
for any damages that result from the use of its products in accordance with information
provided by OMEGA, either verbal or written. OMEGA warrants only that the parts
manufactured by it will be as specified and free of defects. OMEGA MAKES NO OTHER
WARRANTIES OR REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESSED OR
IMPLIED, EXCEPT THAT OF TITLE, AND ALL IMPLIED WARRANTIES INCLUDING ANY
WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
HEREBY DISCLAIMED. LIMITATION OF LIABILITY: The remedies of purchaser set forth
herein are exclusive and the total liability of OMEGA with respect to this order, whether
based on contract, warranty, negligence, indemnification, strict liability or otherwise,
shall not exceed the purchase price of the component upon which liability is based. In
no event shall OMEGA be liable for consequential, incidental or special damages.
CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a
ÒBasic ComponentÓ under 10 CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in
medical applications or used on humans. Should any Product(s) be used in or with any nuclear
installation or activity, medical application, used on humans, or misused in any way, OMEGA assumes
no responsibility as set forth in our basic WARRANTY/ DISCLAIMER language, and additionally,
purchaser will indemnify OMEGA and hold OMEGA harmless from any liability or damage whatsoever
arising out of the use of the Product(s) in such a manner.
RETURN REQUESTS / INQUIRIES
Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department.
BEFORE RETURNING ANY PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN
AUTHORIZED RETURN (AR) NUMBER FROM OMEGAÕS CUSTOMER SERVICE
DEPARTMENT (IN ORDER TO AVOID PROCESSING DELAYS). The assigned AR number
should then be marked on the outside of the return package and on any correspondence.
The purchaser is responsible for shipping charges, freight, insurance and proper packaging to
prevent breakage in transit.
FOR WARRANTY RETURNS, please have
the following information available BEFORE
contacting OMEGA:
1. P.O. number under which the product
was PURCHASED,
2. Model and serial number of the product
under warranty, and
FOR NON-WARRANTY REPAIRS, consult
OMEGA for current repair charges. Have the
following information available BEFORE
contacting OMEGA:
1. P.O. number to cover the COST
of the repair,
2. Model and serial number of product, and
3. Repair instructions and/or specific
problems relative to the product.
3. Repair instructions and/or specific
problems relative to the product.
OMEGAÕs policy is to make running changes, not model changes, whenever an improvement is possible.
This affords our customers the latest in technology and engineering.
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.
©
Copyright 1999 OMEGA ENGINEERING, INC. All rights reserved. This document may not be copied,
photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or in part,
without prior written consent of OMEGA ENGINEERING, INC.
PATENT NOTICE: This product is covered by one or more of the following patents: U.S. Pat. No. Des. 336,895;
5,274,577 / Canada 2052599; 2052600 / Italy 1249456; 1250938 / France Brevet No. 91 12756 / Spain 2039150;
2048066 / UK Patent No. GB2 249 837; GB2 248 954 / Germany DE 41 34398 C2
Used Under License. Other International Patents Pending.
Download from Www.Somanuals.com. All Manuals Search And Download.
Where Do I Find Everything I Need for
Process Measurement and Control?
OMEGAÉOf Course!
TEMPERATURE
Ⅺ
ߜ Thermocouple, RTD & Thermistor Probes,
Connectors, Panels & Assemblies
Wire: Thermocouple, RTD & Thermistor
Calibrators & Ice Point References
Recorders, Controllers & Process Monitors
Infrared Pyrometers
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ PRESSURE, STRAIN AND FORCE
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Transducers & Strain Gauges
Load Cells & Pressure Gauges
Displacement Transducers
Instrumentation & Accessories
FLOW/LEVEL
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Rotameters, Gas Mass Flowmeters & Flow Computers
Air Velocity Indicators
Turbine/Paddlewheel Systems
Totalizers & Batch Controllers
pH/CONDUCTIVITY
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ pH Electrodes, Testers & Accessories
Benchtop/Laboratory Meters
Controllers, Calibrators, Simulators & Pumps
Industrial pH & Conductivity Equipment
DATA ACQUISITION
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Data Acquisition & Engineering Software
Communications-Based Acquisition Systems
Plug-in Cards for Apple, IBM & Compatibles
Datalogging Systems
Recorders, Printers & Plotters
HEATERS
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Heating Cable
Cartridge & Strip Heaters
Immersion & Band Heaters
Flexible Heaters
Laboratory Heaters
ENVIRONMENTAL
MONITORING AND CONTROL
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Metering & Control Instrumentation
Refractometers
Pumps & Tubing
Air, Soil & Water Monitors
Industrial Water & Wastewater Treatment
pH, Conductivity & Dissolved Oxygen Instruments
M-2814/0899
Download from Www.Somanuals.com. All Manuals Search And Download.
|