User’s Guide
Shop online at
e-mail: [email protected]
OME-A826PG
ISA-Bus Multi-Functional Board
Software Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
OME-A-826PG
Software Manual
[ For Windows 95/98/NT ]
Date: Aug-15-2000
Ver: 2.2
Page 1
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
Table of Contents
Introduction.................................................................................................................. 4
1.1 References ............................................................................................................. 5
1.2 Range Configuration Code.................................................................................... 6
2.1 For C user .............................................................................................................. 8
2.1.1 A826.H (for Win 95/98) ................................................................................. 8
2.1.2 A826.H (for Win NT) ................................................................................... 11
2.1.3 A826U.Cpp (for BCB).................................................................................. 13
2.1.4 The VC++ Demo Result: .............................................................................. 14
2.1.5 Borland C++ Builder Demo Result .............................................................. 14
2.2 For The VB user .................................................................................................. 15
2.2.1 A826.BAS (for Win 95/98)........................................................................... 15
2.2.2 A826.BAS (for Win NT) .............................................................................. 18
2.2.3 A826U.BAS.................................................................................................. 21
2.2.4 The VB Demo Result:................................................................................... 21
2.3 For The Delphi user............................................................................................. 22
2.3.1 A826.PAS (for Win 95/98)........................................................................... 22
2.3.2 A826.PAS (for Win NT)............................................................................... 26
2.3.3 A826U.PAS .................................................................................................. 29
2.3.4 Delphi Demo Result :.................................................................................... 30
Function Description.................................................................................................. 31
3.1 TEST Function .................................................................................................... 33
3.1.2 FLOAT_SUB_2............................................................................................ 33
3.1.3 A826_Get_DLL_Version ............................................................................. 34
3.1.4 A826_GetDriverVersion............................................................................... 34
3.2 DI/DO Function................................................................................................... 35
3.2.1 A826_Di........................................................................................................ 35
3.2.2 A826_Do....................................................................................................... 35
3.2.3 A826_OutputByte......................................................................................... 36
3.2.5 A826_InputByte............................................................................................ 37
3.2.6 A826_InputWord......................................................................................... 37
3.3 A/D , D/A Functions............................................................................................ 38
3.3.1 A826_AD...................................................................................................... 38
3.3.2 A826_DA...................................................................................................... 38
3.3.3 A826_ADs_Hex............................................................................................ 39
3.3.4 A826_ADs_Float.......................................................................................... 40
3.3.5 A826_Uni5_DA............................................................................................ 41
3.3.6 A826_Uni10_DA.......................................................................................... 41
3.4 Driver Functions.................................................................................................. 42
3.4.1 A826_DriverInit............................................................................................ 42
3.4.2 A826_DriverClose........................................................................................ 42
3.4.3 A826_DELAY.............................................................................................. 43
Date: Aug-15-2000
Ver: 2.2
Page 2
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
A826_Check_Address .............................................................................. 43
3.5 AD, Interrupt functions........................................................................................ 44
3.5.1 A826_InstallIrq............................................................................................. 44
3.5.2 A826_AD_INT_Start.................................................................................... 44
3.5.3 A826_AD_INT_Stop.................................................................................... 45
3.5.4 A826_GetIntCount........................................................................................ 45
3.5.5 A826_GetBuffer ........................................................................................... 46
3.5.6 A826_GetFloatBuffer ................................................................................... 46
3.5.7 Diagram of Interrupt Mode........................................................................... 47
3.6 AD , DMA functions ........................................................................................... 49
3.6.1 A826_AD_DMA_InstallIrq.......................................................................... 49
3.6.3 A826_AD_DMA_Start................................................................................. 50
3.6.4 A826_AD_DMA_Stop ................................................................................. 51
3.6.5 A826_AD_DMA_IsNotFinished.................................................................. 51
3.6.6 A826_AD_DMA_GetBuffer ........................................................................ 52
3.6.8 Diagram of AD , DMA Mode....................................................................... 53
Program Architecture................................................................................................. 55
Contact Us.................................................................................................................. 56
Date: Aug-15-2000
Ver: 2.2
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
1 Introduction
The OME-A-826PG is a multifunction, 16 bits resolution A/D, D/A and digital
I/O card. The feature of the OME-A-826PG are given as below:
1. A/D=16 bits, 16 channels(single-ended) or 8 channels(differential)
2. A-826PG : low gain (1/2/4/8), the analog input signal range configuration code is given in
Sec. 4.1
3. DA=12 bits, 2 channels, 0-5V or 0-10V output by hardware JP1 setting
4. 16 channels TTL compatible digital input
5. 16 channels TTL compatible digital output
The A826.DLL and A826.Vxd is a collection of data acquisition subroutines
for the OME-A-826PG Windows 95/98 Applications. These subroutines are
written with C language and perform a variety of data acquisition operations.
The subroutines in A826.DLL are easy understanding as its name standing
for. It provides powerful, easy-to-use subroutine for developing your data
acquisition application. Your program can call this DLL functions by VC++, VB ,
Delphi , Borland C++ Builder easily. To speed-up your developing process, some
demonstration source program are provided.
The OME-A-826PG consists of these DLLs and device driver :
For Windows 95/98
• A826.dll, A826.lib
• A826.Vxd
ÆLibraries for A826 PG card
Æ A826 Device driver for Windows 95/98
For Windows NT
• A826.dll, A826.lib
• A826.sys, Napwnt.sys
ÆLibraries for OME-A826 PGL/PGH card
ÆA826 Device driver for Windows NT
These DLLs can perform a variety of data acquisition operations as follows:
Date: Aug-15-2000
Ver: 2.2
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
1.1 References
Please refer to the following user manuals:
• SoftInst.pdf:
Describes how to install the software package under Windows 95/98/NT.
• CallDll.pdf:
Describes how to call the DLL functions with VC++5, VB5, Delphi3 and Borland C++
Builder 3.
• ResCheck.pdf:
Describes how to check the resources I/O Port address, IRQ number and DMA
number for add-on cards under Windows 95/98/NT.
Date: Aug-15-2000
Ver: 2.2
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
1.2 Range Configuration Code
The AD converter of the OME-A-826PG is 16 bits under all
configuration code. If the analog input range is configured to ±5V range, the
resolution of one bit is equal to 2.44 mV. If the analog input range is configured to
±2.5V range, the resolution will be 1.22 mV. If the analog input signal is about
1 V, use configuration 0/1/2 (for OME-A-826PG), it will get nearly the same result
except resolution. So choose the correct configuration code can achieve
the most high precision measurement.
OME-A-826PG Input Signal Range Configuration Code Table
Bipolar/Unipolar
Bipolar
Input Signal Range
Configuration Code
0
± 10V
± 5V
± 2.5V
± 1.25V
1
2
3
Bipolar
Bipolar
Bipolar
Date: Aug-15-2000
Ver: 2.2
Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
2 Declaration Files
For the Windows 95/98 user:
|--\Driver
| |--\A826.DLL
| |--\A826.Vxd
| |--\BCB3
<-- Dynamic Linking Library
<-- Device driver for A826PG
| | |--\A826.h
| | |--\A826.Lib
| | +--\A826u.cpp
| |--\Delphi3
<-- Header file
<-- Import Library for BCB
<-- Some function for BCB
| | |--\A826.pas
| | +--\A826u.pas
| |--\VB5
<-- Declaration file
<-- Some function for Delphi
| | |--\A826.bas
| | +--\A826u.bas
| +--\VC5
<-- Declaration file
<-- Some function for VB
|
|
|--\A826.h
+--\A826.Lib
<-- Header file
<-- Import Library for VC++
For the Windows NT user:
|--\Driver
| |--\A826.DLL
| |--\A826.sys
| |--\Napwnt.sys
| |--\BCB3
<-- Dynamic Linking Library
<-- device driver
<-- device driver
| | |--\A826.h
| | |--\A826.Lib
| | +--\A826u.cpp
| |--\Delphi3
<-- Header file
<-- Import Library for BCB
<-- Some function for BCB
| | |--\A826.pas
| | +--\A826u.pas
| |--\VB5
<-- Declaration file
<-- Some function for Delphi
| | |--\A826.bas
| | +--\A826u.bas
| +--\VC5
<-- Declaration file
<-- Some function for VB
|
|
|--\A826.h
+--\A826.Lib
<-- Header file
<-- Import Library for VC++
Date: Aug-15-2000
Ver: 2.2
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
2.1 For C user
2.1.1
A826.H (for Win 95/98)
#ifdef __cplusplus
#define EXPORTS extern "C" __declspec (dllimport)
#else
#define EXPORTS
#endif
/***************** DEFINE A826 RELATIVE ADDRESS *****************/
#define TIMER0
#define TIMER1
#define TIMER2
#define TIMER_MODE
#define AD_LO
0x00
0x01
0x02
0x03
0x04 /* Analog to Digital, Low Byte */
0x05 /* Analog to Digital, High Byte */
0x04 /* Digit to Analog, CH 0 */
0x05
0x06 /* Digit to Analog, CH 1 */
0x07
#define AD_HI
#define DA_CH0_LO
#define DA_CH0_HI
#define DA_CH1_LO
#define DA_CH1_HI
#define DI_LO
0x06 /* Digit Input */
0x0D /* Digit Output */
#define DO_LO
#define CLEAR_IRQ
#define SET_GAIN
#define SET_CH
#define SET_MODE
#define SOFT_TRIG
0x08
0x09
0x0A
0x0B
0x0C
#define POLLING_MODE
#define DMA_MODE
#define INTERRUPT_MODE
1
2
6
/*** define the gain mode ***/
#define A826_BI_1
0
#define A826_BI_10
#define A826_BI_100
#define A826_BI_1000
#define A826_UNI_1
#define A826_UNI_10
#define A826_UNI_100
#define A826_UNI_1000
#define A826_BI_05
#define A826_BI_5
1
2
3
4
5
6
7
8
9
#define A826_BI_50
#define A826_BI_500
10
11
#define A826_BI_2
#define A826_BI_4
#define A826_BI_8
#define A826_UNI_2
#define A826_UNI_4
#define A826_UNI_8
1
2
3
5
6
7
Date: Aug-15-2000
Ver: 2.2
Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
#define NoError
0
#define DriverOpenError
#define DriverNoOpen
#define GetDriverVersionError
#define InstallIrqError
#define ClearIntCountError
#define GetIntCountError
#define AdError1
1
2
3
4
5
6
100
-200.0
9
#define AdError2
#define InstallBufError
#define GetBufferError
#define INTStartError
#define INTStopError
#define InstallDmaIrqError
#define RemoveDmaIrqError
#define DmaStartError
#define DmaStopError
#define DmaGetDataError
#define TimeoutError
#define AllocateMemoryError
#define OtherError
10
11
12
13
14
15
16
17
18
19
20
//********* Test Functios ************
EXPORTS short CALLBACK SHORT_SUB_2(short nA, short nB);
EXPORTS float CALLBACK FLOAT_SUB_2(float fA, float fB);
EXPORTS WORD CALLBACK A826_Get_DLL_Version(void);
EXPORTS WORD CALLBACK A826_GetDriverVersion(WORD *wDriverVersion);
//********* DI/DO Functios ************
EXPORTS WORD CALLBACK A826_DI(WORD wBase);
EXPORTS void CALLBACK A826_DO(WORD wBase, WORD wHexValue);
//********* DA/AD Functios ************
EXPORTS float CALLBACK A826_AD(WORD wBase, WORD wChannel, WORD wConfig);
EXPORTS WORD CALLBACK A826_ADs_Hex(WORD wBase, WORD wChannel, WORD wConfig,
short wBuf[], WORD wCount);
EXPORTS WORD CALLBACK A826_ADs_Float(WORD wBase, WORD wChannel, WORD wConfig,
float fBuf[], WORD wCount);
EXPORTS void CALLBACK A826_DA(WORD wBase, WORD wChannel, WORD wHexValue);
EXPORTS void CALLBACK A826_Uni5_DA(WORD wBase, WORD wChannel, float fValue);
EXPORTS void CALLBACK A826_Uni10_DA(WORD wBase, WORD wChannel, float fValue);
//********* Driver Functios ************
EXPORTS WORD CALLBACK A826_DriverInit(void);
EXPORTS void CALLBACK A826_DriverClose(void);
EXPORTS WORD CALLBACK A826_DELAY(WORD wBase, WORD wDownCount);
EXPORTS WORD CALLBACK A826_Check_Address(WORD wBase);
EXPORTS void CALLBACK A826_OutputByte(WORD wPortAddr, UCHAR bOutputVal);
EXPORTS void CALLBACK A826_OutputWord(WORD wPortAddr, WORD wOutputVal);
EXPORTS WORD CALLBACK A826_InputByte(WORD wPortAddr);
EXPORTS WORD CALLBACK A826_InputWord(WORD wPortAddr);
Date: Aug-15-2000
Ver: 2.2
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
//********* IRQ Functios ************
EXPORTS WORD CALLBACK A826_InstallIrq
(WORD wBase, WORD wIrq, HANDLE *hEvent, DWORD dwCount);
EXPORTS WORD CALLBACK A826_AD_INT_Start(WORD Ch, WORD Gain, WORD c1, WORD c2);
EXPORTS WORD CALLBACK A826_AD_INT_Stop(void);
EXPORTS WORD CALLBACK A826_GetIntCount(DWORD *dwVal);
EXPORTS WORD CALLBACK A826_GetBuffer(DWORD dwNum, short wBuffer[]);
EXPORTS WORD CALLBACK A826_GetFloatBuffer(DWORD dwNum, float fBuffer[]);
//********* DMA Functios ************
EXPORTS WORD CALLBACK A826_AD_DMA_InstallIrq(WORD wBase,WORD wIrq,WORD wDmaChan);
EXPORTS WORD CALLBACK A826_AD_DMA_RemoveIrq(void);
EXPORTS WORD CALLBACK A826_AD_DMA_Start(WORD Ch,WORD Gain,WORD c1,WORD c2,
int cnt, WORD wPassOut[]);
EXPORTS WORD CALLBACK A826_AD_DMA_Stop(void);
EXPORTS WORD CALLBACK A826_AD_DMA_IsNotFinished(void);
EXPORTS WORD CALLBACK A826_AD_DMA_GetBuffer(short wBuf[]);
EXPORTS WORD CALLBACK A826_AD_DMA_GetFloatBuffer(float fBuf[]);
Date: Aug-15-2000
Ver: 2.2
Page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
2.1.2
A826.H (for Win NT)
#ifdef __cplusplus
#define EXPORTS extern "C" __declspec (dllimport)
#else
#define EXPORTS
#endif
/***************** DEFINE A826 RELATIVE ADDRESS *****************/
#define TIMER0
#define TIMER1
#define TIMER2
#define TIMER_MODE
#define AD_LO
0x00
0x01
0x02
0x03
0x04 /* Analog to Digital, Low Byte */
0x05 /* Analog to Digital, High Byte */
0x04 /* Digit to Analog, CH 0 */
0x05
0x06 /* Digit to Analog, CH 1 */
0x07
#define AD_HI
#define DA_CH0_LO
#define DA_CH0_HI
#define DA_CH1_LO
#define DA_CH1_HI
#define DI_LO
0x06 /* Digit Input */
0x0D /* Digit Output */
#define DO_LO
#define CLEAR_IRQ
#define SET_GAIN
#define SET_CH
#define SET_MODE
#define SOFT_TRIG
0x08
0x09
0x0A
0x0B
0x0C
#define POLLING_MODE
#define DMA_MODE
#define INTERRUPT_MODE
1
2
6
/*** define the gain mode ***/
#define A826_BI_1
0
#define A826_BI_10
#define A826_BI_100
#define A826_BI_1000
#define A826_UNI_1
#define A826_UNI_10
#define A826_UNI_100
#define A826_UNI_1000
#define A826_BI_05
#define A826_BI_5
1
2
3
4
5
6
7
8
9
#define A826_BI_50
#define A826_BI_500
10
11
#define A826_BI_2
#define A826_BI_4
#define A826_BI_8
#define A826_UNI_2
#define A826_UNI_4
#define A826_UNI_8
1
2
3
5
6
7
Date: Aug-15-2000
Ver: 2.2
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
#define NoError
#define DriverOpenError
#define DriverNoOpen
0
1
2
#define GetDriverVersionError 3
#define InstallIrqError
#define ClearIntCountError
#define GetIntCountError
#define AdError1
#define AdError2
#define InstallBufError
4
5
6
100
-200
9
#define AllocateMemoryError 10
#define CardTypeError
#define GetBufferError
#define TimeoutError
#define OtherError
11
12
13
14
//********* Test Functios ************
EXPORTS short CALLBACK SHORT_SUB_2(short nA, short nB);
EXPORTS float CALLBACK FLOAT_SUB_2(float fA, float fB);
EXPORTS WORD CALLBACK A826_Get_DLL_Version(void);
EXPORTS WORD CALLBACK A826_GetDriverVersion(WORD *wDriverVersion);
//********* DI/DO Functios ************
EXPORTS WORD CALLBACK A826_DI(WORD wBase);
EXPORTS void CALLBACK A826_DO(WORD wBase, WORD wHexValue);
//********* DA/AD Functios ************
EXPORTS float CALLBACK A826_AD(WORD wBase, WORD wChannel, WORD wConfig);
EXPORTS WORD CALLBACK A826_ADs_Hex(WORD wBase, WORD wChannel, WORD
wConfig, short wBuf[], WORD wCount);
EXPORTS WORD CALLBACK A826_ADs_Float(WORD wBase, WORD wChannel, WORD
wConfig, float fBuf[], WORD wCount);
EXPORTS void CALLBACK A826_DA(WORD wBase, WORD wChannel, WORD wHexValue);
EXPORTS void CALLBACK A826_Uni5_DA(WORD wBase, WORD wChannel, float fValue);
EXPORTS void CALLBACK A826_Uni10_DA(WORD wBase, WORD wChannel, float fValue);
//********* Driver Functios ************
EXPORTS WORD CALLBACK A826_DriverInit(void);
EXPORTS void CALLBACK A826_DriverClose(void);
EXPORTS WORD CALLBACK A826_DELAY(WORD wBase, WORD wDownCount);
EXPORTS WORD CALLBACK A826_Check_Address(WORD wBase);
EXPORTS void CALLBACK A826_OutputByte(WORD wPortAddr, UCHAR bOutputVal);
EXPORTS void CALLBACK A826_OutputWord(WORD wPortAddr, WORD wOutputVal);
EXPORTS WORD CALLBACK A826_InputByte(WORD wPortAddr);
EXPORTS WORD CALLBACK A826_InputWord(WORD wPortAddr);
//********* IRQ Functios ************
EXPORTS WORD CALLBACK A826_InstallIrq
(WORD wBase, WORD wIrq, HANDLE *hEvent,DWORD dwCount);
EXPORTS WORD CALLBACK A826_AD_INT_Start
(WORD Ch, WORD Gain, WORD c1, WORD c2);
EXPORTS WORD CALLBACK A826_AD_INT_Stop(void);
EXPORTS WORD CALLBACK A826_GetIntCount(DWORD *dwVal);
EXPORTS WORD CALLBACK A826_GetBuffer(DWORD dwNum, short wBuffer[]);
EXPORTS WORD CALLBACK A826_GetFloatBuffer(DWORD dwNum, float fBuffer[]);
Date: Aug-15-2000
Ver: 2.2
Page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
2.1.3
A826U.Cpp (for BCB)
#include <math.h>
//*-----------------------------------------------------*
//* Return voltage value or -100.0 if any error occurs *
//* or parameter is out of range.
//* HiLo : 1 --> High Gain , 0 --> Low Gain
//* Gain : 0-3
*
*
*
//*-----------------------------------------------------*
float A826_AD2F(Word hex, int Gain )
{
float ZeroBase, VoltageRange, FullRange ;
short int i ;
ZeroBase = 0.0 ;
FullRange = 32767.0 ;
VoltageRange = 10.0 ;
i = hex ;
Gain = Gain % 16;
if ( (Gain < 0) || (Gain > 3) )
return -100.0;
return ((((i - ZeroBase) / FullRange) * VoltageRange) / pow( 2 , Gain));
}
Date: Aug-15-2000
Ver: 2.2
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
2.2 For The VB user
2.2.1
A826.BAS (for Win 95/98)
Attribute VB_Name = "A826"
'*********************************************************************************
'
The Declare of A826.DLL for A826 DAQ Card
'*********************************************************************************
Declare Sub Sleep Lib "kernel32" (ByVal dwMilliseconds As Long)
'***************** DEFINE A826 RELATIVE ADDRESS *****************
Global Const TIMER0
Global Const Timer1
Global Const TIMER2
Global Const TIMER_MODE
Global Const AD_LO
= &H0
= &H1
= &H2
= &H3
= &H4
= &H5
= &H4
= &H5
= &H6
= &H7
= &H6
= &HD
'* Analog to Digital, Low Byte *
'* Analog to Digital, High Byte *
'* Digit to Analog, CH 0 *
Global Const AD_HI
Global Const DA_CH0_LO
Global Const DA_CH0_HI
Global Const DA_CH1_LO
Global Const DA_CH1_HI
Global Const DI_LO
'* Digit to Analog, CH 1 *
'* Digit Input *
'* Digit Output *
Global Const DO_LO
Global Const CLEAR_IRQ
Global Const SET_GAIN
Global Const SET_CH
Global Const SET_MODE
Global Const SOFT_TRIG
= &H8
= &H9
= &HA
= &HB
= &HC
Global Const POLLING_MODE = 1
Global Const DMA_MODE = 2
Global Const INTERRUPT_MODE = 6
'*** define the gain mode ***
Global Const A826_BI_1
Global Const A826_BI_10
Global Const A826_BI_100
Global Const A826_BI_1000
Global Const A826_UNI_1
Global Const A826_UNI_10
= 0
= 1
= 2
= 3
= 4
= 5
Global Const A826_UNI_100 = 6
Global Const A826_UNI_1000 = 7
Global Const A826_BI_05
Global Const A826_BI_5
Global Const A826_BI_50
Global Const A826_BI_500
= 8
= 9
= 10
= 11
Date: Aug-15-2000
Ver: 2.2
Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
Global Const A826_BI_2
Global Const A826_BI_4
Global Const A826_BI_8
Global Const A826_UNI_2
Global Const A826_UNI_4
Global Const A826_UNI_8
= 1
= 2
= 3
= 5
= 6
= 7
Global Const NoError
= 0
Global Const DriverOpenError
Global Const DriverNoOpen
= 1
= 2
Global Const GetDriverVersionError
Global Const InstallIrqError
Global Const ClearIntCountError
Global Const GetIntCountError
Global Const AdError1
= 3
= 4
= 5
= 6
= 100
= -200#
= 9
= 10
= 11
= 12
= 13
= 14
= 15
= 16
= 17
= 18
= 19
= 20
Global Const AdError2
Global Const InstallBufError
Global Const GetBufferError
Global Const INTStartError
Global Const INTStopError
Global Const InstallDmaIrqError
Global Const RemoveDmaIrqError
Global Const DmaStartError
Global Const DmaStopError
Global Const DmaGetDataError
Global Const TimeoutError
Global Const AllocateMemoryError
Global Const OtherError
'******* Test Functions ***********
Declare Function SHORT_SUB_2 Lib "A826.DLL" (ByVal nA As Integer, _
ByVal nB As Integer) As Integer
Declare Function FLOAT_SUB_2 Lib "A826.DLL" (ByVal fA As Single, _
ByVal fB As Single) As Single
Declare Function A826_Get_DLL_Version Lib "A826.DLL" () As Integer
Declare Function A826_GetDriverVersion Lib "A826.DLL" _
(wDriverVersion As Integer) As Integer
'******* DI/DO Functions ***********
Declare Function A826_DI Lib "A826.DLL" (ByVal wBase As Integer) As Integer
Declare Sub A826_DO Lib "A826.DLL" (ByVal wBase As Integer, _
ByVal wHexValue As Integer)
'******* AD/DA Functions ***********
Declare Function A826_AD Lib "A826.DLL" (ByVal wBase As Integer, _
ByVal wChannel As Integer, ByVal wConfig As Integer) As Single
Declare Function A826_ADs_Hex Lib "A826.DLL" (ByVal wBase As Integer, _
ByVal wChannel As Integer, ByVal wConfig As Integer, _
wBuf As Integer, ByVal wCount As Integer) As Integer
Declare Function A826_ADs_Float Lib "A826.DLL" (ByVal wBase As Integer, _
ByVal wChannel As Integer, ByVal wConfig As Integer, _
fBuf As Single, ByVal wCount As Integer) As Integer
Declare Sub A826_DA Lib "A826.DLL" (ByVal wBase As Integer, _
ByVal wChannel As Integer, ByVal wHexValue As Integer)
Declare Sub A826_Uni5_DA Lib "A826.DLL" (ByVal wBase As Integer, _
ByVal wChannel As Integer, ByVal fValue As Single)
Date: Aug-15-2000
Ver: 2.2
Page 16
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
Declare Sub A826_Uni10_DA Lib "A826.DLL" (ByVal wBase As Integer, _
ByVal wChannel As Integer, ByVal fValue As Single)
'******* Driver Functions ***********
Declare Function A826_DriverInit Lib "A826.DLL" () As Integer
Declare Sub A826_DriverClose Lib "A826.DLL" ()
Declare Function A826_DELAY Lib "A826.DLL" (ByVal wBase As Integer, _
ByVal wDownCount As Integer) As Integer
Declare Function A826_Check_Address Lib "A826.DLL" (ByVal wBase As Integer) As Integer
Declare Sub A826_OutputByte Lib "A826.DLL" (ByVal wPortAddr As Integer, ByVal bOutputVal
As Byte)
Declare Sub A826_OutputWord Lib "A826.DLL" (ByVal wPortAddr As Integer, ByVal wOutputVal
As Integer)
Declare Function A826_InputByte Lib "A826.DLL" (ByVal wPortAddr As Integer) As Integer
Declare Function A826_InputWord Lib "A826.DLL" (ByVal wPortAddr As Integer) As Integer
'******* IRQ Functions ***********
Declare Function A826_InstallIrq Lib "A826.DLL" (ByVal wBase As Integer, _
ByVal wIrq As Integer, hEvent As Long, ByVal dwCount As Integer) As Integer
Declare Function A826_GetIntCount Lib "A826.DLL" (dwVal As Long) As Integer
Declare Function A826_GetBuffer Lib "A826.DLL" (ByVal dwNum As Long, _
wBuffer As Integer) As Integer
Declare Function A826_AD_INT_Start Lib "A826.DLL" (ByVal Ch As Integer, _
ByVal Gain As Integer, ByVal c1 As Integer, ByVal c2 As Integer) As Integer
Declare Function A826_AD_INT_Stop Lib "A826.DLL" () As Integer
Declare Function A826_GetFloatBuffer Lib "A826.DLL" (ByVal dwNum As Long, _
fBuffer As Single) As Integer
'******* DMA Functions ***********
Declare Function A826_AD_DMA_InstallIrq Lib "A826.DLL" (ByVal wBase As Integer, _
ByVal wIrq As Integer, ByVal wDmaChan As Integer) As Integer
Declare Function A826_AD_DMA_RemoveIrq Lib "A826.DLL" () As Integer
Declare Function A826_AD_DMA_Start Lib "A826.DLL" (ByVal Ch As Integer, _
ByVal Gain As Integer, ByVal c1 As Integer, ByVal c2 As Integer, _
ByVal cnt As Integer, wPassOut As Integer) As Integer
Declare Function A826_AD_DMA_Stop Lib "A826.DLL" () As Integer
Declare Function A826_AD_DMA_IsNotFinished Lib "A826.DLL" () As Integer
Declare Function A826_AD_DMA_GetBuffer Lib "A826.DLL" (wBuf As Integer) As Integer
Declare Function A826_AD_DMA_GetFloatBuffer Lib "A826.DLL" (fBuf As Single) As Integer
Date: Aug-15-2000
Ver: 2.2
Page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
2.2.2
A826.BAS (for Win NT)
Attribute VB_Name = "A826"
'*********************************************************************************
'
The Declare of A826.DLL for A826 DAQ Card
'*********************************************************************************
Declare Sub Sleep Lib "kernel32" (ByVal dwMilliseconds As Long)
'***************** DEFINE A826 RELATIVE ADDRESS *****************
Global Const TIMER0
Global Const Timer1
Global Const TIMER2
Global Const TIMER_MODE
Global Const AD_LO
= &H0
= &H1
= &H2
= &H3
= &H4
= &H5
= &H4
= &H5
= &H6
= &H7
= &H6
= &HD
'* Analog to Digital, Low Byte *
'* Analog to Digital, High Byte *
'* Digit to Analog, CH 0 *
Global Const AD_HI
Global Const DA_CH0_LO
Global Const DA_CH0_HI
Global Const DA_CH1_LO
Global Const DA_CH1_HI
Global Const DI_LO
'* Digit to Analog, CH 1 *
'* Digit Input *
'* Digit Output *
Global Const DO_LO
Global Const CLEAR_IRQ
Global Const SET_GAIN
Global Const SET_CH
Global Const SET_MODE
Global Const SOFT_TRIG
= &H8
= &H9
= &HA
= &HB
= &HC
Global Const POLLING_MODE
Global Const DMA_MODE
Global Const INTERRUPT_MODE
= 1
= 2
= 6
'*** define the gain mode ***
Global Const A826_BI_1
Global Const A826_BI_10
Global Const A826_BI_100
Global Const A826_BI_1000
Global Const A826_UNI_1
Global Const A826_UNI_10
Global Const A826_UNI_100
Global Const A826_UNI_1000
Global Const A826_BI_05
Global Const A826_BI_5
Global Const A826_BI_50
Global Const A826_BI_500
= 0
= 1
= 2
= 3
= 4
= 5
= 6
= 7
= 8
= 9
= 10
= 11
Global Const A826_BI_2
Global Const A826_BI_4
Global Const A826_BI_8
Global Const A826_UNI_2
Global Const A826_UNI_4
Global Const A826_UNI_8
= 1
= 2
= 3
= 5
= 6
= 7
Date: Aug-15-2000
Ver: 2.2
Page 18
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
Global Const NoError
= 0
Global Const DriverOpenError
Global Const DriverNoOpen
Global Const GetDriverVersionError
Global Const InstallIrqError
Global Const ClearIntCountError
Global Const GetIntCountError
Global Const AdError1
= 1
= 2
= 3
= 4
= 5
= 6
= 100
= -200#
= 9
= 10
= 11
= 12
= 13
= 14
Global Const AdError2
Global Const InstallBufError
Global Const AllocateMemoryError
Global Const CardTypeError
Global Const GetBufferError
Global Const TimeoutError
Global Const OtherError
'******* Test Functions ***********
Declare Function SHORT_SUB_2 Lib "A826.DLL" (ByVal nA As Integer, _
ByVal nB As Integer) As Integer
Declare Function FLOAT_SUB_2 Lib "A826.DLL" (ByVal fA As Single, _
ByVal fB As Single) As Single
Declare Function A826_Get_DLL_Version Lib "A826.DLL" () As Integer
Declare Function A826_GetDriverVersion Lib "A826.DLL" _
(wDriverVersion As Integer) As Integer
'******* DI/DO Functions ***********
Declare Function A826_DI Lib "A826.DLL" (ByVal wBase As Integer) As Integer
Declare Sub A826_DO Lib "A826.DLL" (ByVal wBase As Integer, _
ByVal wHexValue As Integer)
'******* AD/DA Functions ***********
Declare Function A826_AD Lib "A826.DLL" (ByVal wBase As Integer, _
ByVal wChannel As Integer, ByVal wConfig As Integer) As Single
Declare Function A826_ADs_Hex Lib "A826.DLL" (ByVal wBase As Integer, _
ByVal wChannel As Integer, ByVal wConfig As Integer, _
wBuf As Integer, ByVal wCount As Integer) As Integer
Declare Function A826_ADs_Float Lib "A826.DLL" (ByVal wBase As Integer, _
ByVal wChannel As Integer, ByVal wConfig As Integer, _
fBuf As Single, ByVal wCount As Integer) As Integer
Declare Sub A826_DA Lib "A826.DLL" (ByVal wBase As Integer, _
ByVal wChannel As Integer, ByVal wHexValue As Integer)
Declare Sub A826_Uni5_DA Lib "A826.DLL" (ByVal wBase As Integer, _
ByVal wChannel As Integer, ByVal fValue As Single)
Declare Sub A826_Uni10_DA Lib "A826.DLL" (ByVal wBase As Integer, _
ByVal wChannel As Integer, ByVal fValue As Single)
Date: Aug-15-2000
Ver: 2.2
Page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
'******* Driver Functions ***********
Declare Function A826_DriverInit Lib "A826.DLL" () As Integer
Declare Sub A826_DriverClose Lib "A826.DLL" ()
Declare Function A826_DELAY Lib "A826.DLL" (ByVal wBase As Integer, _
ByVal wDownCount As Integer) As Integer
Declare Function A826_Check_Address Lib "A826.DLL" (ByVal wBase As Integer) As Integer
Declare Sub A826_OutputByte Lib "A826.DLL" (ByVal wPortAddr As Integer, ByVal bOutputVal
As Byte)
Declare Sub A826_OutputWord Lib "A826.DLL" (ByVal wPortAddr As Integer, ByVal wOutputVal
As Integer)
Declare Function A826_InputByte Lib "A826.DLL" (ByVal wPortAddr As Integer) As Integer
Declare Function A826_InputWord Lib "A826.DLL" (ByVal wPortAddr As Integer) As Integer
'******* IRQ Functions ***********
Declare Function A826_InstallIrq Lib "A826.DLL" (ByVal wBase As Integer, _
ByVal wIrq As Integer, hEvent As Long, ByVal dwCount As Integer) As Integer
Declare Function A826_GetIntCount Lib "A826.DLL" (dwVal As Long) As Integer
Declare Function A826_GetBuffer Lib "A826.DLL" (ByVal dwNum As Long, _
wBuffer As Integer) As Integer
Declare Function A826_AD_INT_Start Lib "A826.DLL" (ByVal Ch As Integer, _
ByVal Gain As Integer, ByVal c1 As Integer, ByVal c2 As Integer) As Integer
Declare Function A826_AD_INT_Stop Lib "A826.DLL" () As Integer
Declare Function A826_GetFloatBuffer Lib "A826.DLL" (ByVal dwNum As Long, _
fBuffer As Single) As Integer
Date: Aug-15-2000
Ver: 2.2
Page 20
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
2.2.3
A826U.BAS
Attribute VB_Name = "A826u"
'*-----------------------------------------------------*
'* Return voltage value or -100.0 if any error occurs *
'* or parameter is out of range.
'* Gain : 0-3
*
'*-----------------------------------------------------*
Function A826_AD2F(ByVal hex As Integer, ByVal Gain As Integer) As Single
Dim ZeroBase, BullRange, VoltageRange As Single
ZeroBase = 0#
FullRange = 32767#
VoltageRange = 10#
Gain = Gain Mod 16
If Gain < 0 Or Gain > 3 Then
A826_AD2F = -100#
Exit Function
End If
A826_AD2F = ((((hex - ZeroBase) / FullRange) * VoltageRange) / (2 ^ Gain))
End Function
2.2.4
The VB Demo Result:
Date: Aug-15-2000
Ver: 2.2
Page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
2.3 For The Delphi user
2.3.1
A826.PAS (for Win 95/98)
unit A826;
interface
type PSingle=^Single;
type PWord=^Word;
type PInteger=^Integer;
type PSmallInt=^PSmallInt;
const
//***************** DEFINE A826 RELATIVE ADDRESS *****************/
TIMER0
= $00;
TIMER1
= $01;
TIMER2
= $02;
TIMER_MODE
AD_LO
AD_HI
DA_CH0_LO
DA_CH0_HI
DA_CH1_LO
DA_CH1_HI
DI_LO
= $03;
= $04; //* Analog to Digital, Low Byte */
= $05; //* Analog to Digital, High Byte */
= $04; //* Digit to Analog, CH 0 */
= $05;
= $06; //* Digit to Analog, CH 1 */
= $07;
= $06; //* Digit Input */
= $0D; //* Digit Output */
DO_LO
CLEAR_IRQ
SET_GAIN
SET_CH
SET_MODE
SOFT_TRIG
= $08;
= $09;
= $0A;
= $0B;
= $0C;
POLLING_MODE
DMA_MODE
= 1;
= 2;
INTERRUPT_MODE = 6;
//*** define the gain mode ***/
A826_BI_1
= 0;
= 1;
= 2;
= 3;
= 4;
= 5;
= 6;
= 7;
= 8;
= 9;
A826_BI_10
A826_BI_100
A826_BI_1000
A826_UNI_1
A826_UNI_10
A826_UNI_100
A826_UNI_1000
A826_BI_05
A826_BI_5
Date: Aug-15-2000
Ver: 2.2
Page 22
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
A826_BI_50
A826_BI_500
= 10;
= 11;
A826_BI_2
A826_BI_4
A826_BI_8
A826_UNI_2
A826_UNI_4
A826_UNI_8
= 1;
= 2;
= 3;
= 5;
= 6;
= 7;
NoError
DriverOpenError
DriverNoOpen
=
=
=
0;
1;
2;
GetDriverVersionError =
3;
InstallIrqError
=
=
=
=
4;
5;
6;
100;
ClearIntCountError
GetIntCountError
AdError1
AdError2
= -200.0;
InstallBufError
GetBufferError
INTStartError
=
=
=
=
=
=
=
=
=
=
=
=
9;
10;
11;
12;
13;
14;
15;
16;
17;
18;
19;
20;
INTStopError
InstallDmaIrqError
RemoveDmaIrqError
DmaStartError
DmaStopError
DmaGetDataError
TimeoutError
AllocateMemoryError
OtherError
//********* Test Functios ************
Function SHORT_SUB_2(nA, nB : SmallInt):SmallInt; StdCall;
Function FLOAT_SUB_2(fA, fB : Single):Single; StdCall;
Function A826_Get_DLL_Version:WORD; StdCall;
Function A826_GetDriverVersion(var wDriverVersion:WORD):Word; StdCall;
//********* DI/DO Functios ************
Function A826_DI(wBase:Word):Word; StdCall;
Procedure A826_DO(wBase, wHexValue:Word); StdCall;
//********* DA/AD Functios ************
Function A826_AD(wBase,wChannel,wConfig:WORD):Single; StdCall;
Function A826_ADs_Hex(wBase,wChannel,wConfig:WORD; wBuf:PSmallInt;
wCount:WORD):WORD; StdCall;
Function A826_ADs_Float(wBase,wChannel,wConfig:WORD; fBuf:PSingle;
wCount:WORD):WORD; StdCall;
Procedure A826_DA(wBase, wChannel, wHexValue:WORD); StdCall;
Procedure A826_Uni5_DA(wBase,wChannel:Word;fValue:Single); StdCall;
Procedure A826_Uni10_DA(wBase,wChannel:Word;fValue:Single); StdCall;
Date: Aug-15-2000
Ver: 2.2
Page 23
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
//********* Driver Functios ************
Function A826_DriverInit:WORD; StdCall;
Procedure A826_DriverClose; StdCall;
Function A826_DELAY(wBase,wDownCount:WORD):WORD; StdCall;
Function A826_Check_Address(wBase:WORD):WORD; StdCall;
Procedure A826_OutputByte(wPortAddr:WORD; bOutputVal:Byte); StdCall;
Procedure A826_OutputWord(wPortAddr:WORD; wOutputVal:WORD); StdCall;
Function A826_InputByte(wPortAddr:WORD):WORD; StdCall;
Function A826_InputWord(wPortAddr:WORD):WORD; StdCall;
//********* IRQ Functios ************
Function A826_InstallIrq
(wBase,wIrq:WORD; var hEvent:LongInt; dwCount:LongInt):WORD; StdCall;
Function A826_AD_INT_Start(Ch,Gain,c1,c2:WORD):WORD; StdCall;
Function A826_AD_INT_Stop:WORD; StdCall;
Function A826_GetIntCount(var dwVal:LongInt):WORD; StdCall;
Function A826_GetBuffer(dwNum:LongInt; wBuffer:PSmallInt):WORD; StdCall;
Function A826_GetFloatBuffer(dwNum :LongInt;fBuffer:PSingle):Word; StdCall;
//********* DMA Functios ************
Function A826_AD_DMA_InstallIrq(wBase,wIrq,wDmaChan:WORD):WORD; StdCall;
Function A826_AD_DMA_RemoveIrq:WORD; StdCall;
Function A826_AD_DMA_Start(Ch,Gain,c1,c2:WORD; cnt:integer; wPassOut:PInteger):WORD;
StdCall;
Function A826_AD_DMA_Stop:WORD; StdCall;
Function A826_AD_DMA_IsNotFinished:WORD; StdCall;
Function A826_AD_DMA_GetBuffer(wBuf:PSmallInt):WORD; StdCall;
Function A826_AD_DMA_GetFloatBuffer(fBuf:PSingle):Word; StdCall;
implementation
Function SHORT_SUB_2;
Function FLOAT_SUB_2;
Function A826_Get_DLL_Version;
Procedure A826_DA;
external 'A826.DLL' name 'SHORT_SUB_2';
external 'A826.DLL' name 'FLOAT_SUB_2';
external 'A826.DLL' name 'A826_Get_DLL_Version';
external 'A826.DLL' name 'A826_DA';
Procedure A826_Uni5_DA;
Procedure A826_Uni10_DA;
Procedure A826_DO;
external 'A826.DLL' name 'A826_Uni5_DA';
external 'A826.DLL' name 'A826_Uni10_DA';
external 'A826.DLL' name 'A826_DO';
Function A826_DI;
external 'A826.DLL' name 'A826_DI';
Function A826_AD;
external 'A826.DLL' name 'A826_AD';
Function A826_ADs_Hex;
Function A826_ADs_Float;
Function A826_DELAY;
Function A826_Check_Address;
external 'A826.DLL' name 'A826_ADs_Hex';
external 'A826.DLL' name 'A826_ADs_Float';
external 'A826.DLL' name 'A826_DELAY';
external 'A826.DLL' name 'A826_Check_Address';
Function A826_DriverInit;
Procedure A826_DriverClose;
Procedure A826_OutputByte;
Procedure A826_OutputWord;
Function A826_InputByte;
Function A826_InputWord;
external 'A826.DLL' name 'A826_DriverInit';
external 'A826.DLL' name 'A826_DriverClose';
external 'A826.DLL' name 'A826_OutputByte';
external 'A826.DLL' name 'A826_OutputWord';
external 'A826.DLL' name 'A826_InputByte';
external 'A826.DLL' name 'A826_InputWord';
Date: Aug-15-2000
Ver: 2.2
Page 24
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
Function A826_GetDriverVersion;
Function A826_InstallIrq;
external 'A826.DLL' name 'A826_GetDriverVersion';
external 'A826.DLL' name 'A826_InstallIrq';
Function A826_GetBuffer;
external 'A826.DLL' name 'A826_GetBuffer';
external 'A826.DLL' name 'A826_GetFloatBuffer';
external 'A826.DLL' name 'A826_GetIntCount';
external 'A826.DLL' name 'A826_AD_INT_Start';
external 'A826.DLL' name 'A826_AD_INT_Stop';
external 'A826.DLL' name 'A826_AD_DMA_InstallIrq';
Function A826_GetFloatBuffer;
Function A826_GetIntCount;
Function A826_AD_INT_Start;
Function A826_AD_INT_Stop;
Function A826_AD_DMA_InstallIrq;
Function A826_AD_DMA_RemoveIrq; external 'A826.DLL' name 'A826_AD_DMA_RemoveIrq';
Function A826_AD_DMA_Start;
Function A826_AD_DMA_Stop;
external 'A826.DLL' name 'A826_AD_DMA_Start';
external 'A826.DLL' name 'A826_AD_DMA_Stop';
Function A826_AD_DMA_IsNotFinished; external 'A826.DLL' name
'A826_AD_DMA_IsNotFinished';
Function A826_AD_DMA_GetBuffer;
external 'A826.DLL' name 'A826_AD_DMA_GetBuffer';
Function A826_AD_DMA_GetFloatBuffer; external 'A826.DLL' name
'A826_AD_DMA_GetFloatBuffer';
end.
Date: Aug-15-2000
Ver: 2.2
Page 25
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
2.3.2
A826.PAS (for Win NT)
unit A826;
interface
type PSingle=^Single;
type PWord=^Word;
type PInteger=^Integer;
type PSmallInt=^PSmallInt;
const
//***************** DEFINE A826 RELATIVE ADDRESS *****************/
TIMER0
= $00;
TIMER1
= $01;
TIMER2
= $02;
TIMER_MODE
AD_LO
AD_HI
DA_CH0_LO
DA_CH0_HI
DA_CH1_LO
DA_CH1_HI
DI_LO
= $03;
= $04; //* Analog to Digital, Low Byte */
= $05; //* Analog to Digital, High Byte */
= $04; //* Digit to Analog, CH 0 */
= $05;
= $06; //* Digit to Analog, CH 1 */
= $07;
= $06; //* Digit Input */
= $0D; //* Digit Output */
DO_LO
CLEAR_IRQ
SET_GAIN
SET_CH
SET_MODE
SOFT_TRIG
= $08;
= $09;
= $0A;
= $0B;
= $0C;
POLLING_MODE
DMA_MODE
= 1;
= 2;
INTERRUPT_MODE = 6;
//*** define the gain mode ***/
A826_BI_1
= 0;
= 1;
= 2;
= 3;
= 4;
= 5;
= 6;
= 7;
= 8;
= 9;
= 10;
= 11;
A826_BI_10
A826_BI_100
A826_BI_1000
A826_UNI_1
A826_UNI_10
A826_UNI_100
A826_UNI_1000
A826_BI_05
A826_BI_5
A826_BI_50
A826_BI_500
A826_BI_2
A826_BI_4
= 1;
= 2;
Date: Aug-15-2000
Ver: 2.2
Page 26
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
A826_BI_8
= 3;
= 5;
= 6;
= 7;
A826_UNI_2
A826_UNI_4
A826_UNI_8
NoError
DriverOpenError
DriverNoOpen
= 0;
= 1;
= 2;
GetDriverVersionError = 3;
InstallIrqError = 4;
ClearIntCountError
GetIntCountError
AdError1
= 5;
= 6;
= 100;
= -200.0;
AdError2
InstallBufError = 9;
AllocateMemoryError = 10;
CardTypeError
GetBufferError
TimeoutError
OtherError
= 11;
= 12;
= 13;
= 14;
//********* Test Functios ************
Function SHORT_SUB_2(nA, nB : SmallInt):SmallInt; StdCall;
Function FLOAT_SUB_2(fA, fB : Single):Single; StdCall;
Function A826_Get_DLL_Version:WORD; StdCall;
Function A826_GetDriverVersion(var wDriverVersion:WORD):Word; StdCall;
//********* DI/DO Functios ************
Function A826_DI(wBase:Word):Word; StdCall;
Procedure A826_DO(wBase, wHexValue:Word); StdCall;
//********* DA/AD Functios ************
Function A826_AD(wBase,wChannel,wConfig:WORD):Single; StdCall;
Function A826_ADs_Hex(wBase,wChannel,wConfig:WORD; wBuf:PSmallInt;
wCount:WORD):WORD; StdCall;
Function A826_ADs_Float(wBase,wChannel,wConfig:WORD; fBuf:PSingle;
wCount:WORD):WORD; StdCall;
Procedure A826_DA(wBase, wChannel, wHexValue:WORD); StdCall;
Procedure A826_Uni5_DA(wBase,wChannel:Word;fValue:Single); StdCall;
Procedure A826_Uni10_DA(wBase,wChannel:Word;fValue:Single); StdCall;
//********* Driver Functios ************
Function A826_DriverInit:WORD; StdCall;
Procedure A826_DriverClose; StdCall;
Function A826_DELAY(wBase,wDownCount:WORD):WORD; StdCall;
Function A826_Check_Address(wBase:WORD):WORD; StdCall;
Procedure A826_OutputByte(wPortAddr:WORD; bOutputVal:Byte); StdCall;
Procedure A826_OutputWord(wPortAddr:WORD; wOutputVal:WORD); StdCall;
Function A826_InputByte(wPortAddr:WORD):WORD; StdCall;
Function A826_InputWord(wPortAddr:WORD):WORD; StdCall;
Date: Aug-15-2000
Ver: 2.2
Page 27
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
//********* IRQ Functios ************
Function A826_InstallIrq
(wBase,wIrq:WORD; var hEvent:LongInt; dwCount:LongInt):WORD; StdCall;
Function A826_AD_INT_Start(Ch,Gain,c1,c2:WORD):WORD; StdCall;
Function A826_AD_INT_Stop:WORD; StdCall;
Function A826_GetIntCount(var dwVal:LongInt):WORD; StdCall;
Function A826_GetBuffer(dwNum:LongInt; wBuffer:PSmallInt):WORD; StdCall;
Function A826_GetFloatBuffer(dwNum :LongInt;fBuffer:PSingle):Word; StdCall;
implementation
Function SHORT_SUB_2;
Function FLOAT_SUB_2;
Function A826_Get_DLL_Version;
Procedure A826_DA;
external 'A826.DLL' name 'SHORT_SUB_2';
external 'A826.DLL' name 'FLOAT_SUB_2';
external 'A826.DLL' name 'A826_Get_DLL_Version';
external 'A826.DLL' name 'A826_DA';
Procedure A826_Uni5_DA;
Procedure A826_Uni10_DA;
Procedure A826_DO;
external 'A826.DLL' name 'A826_Uni5_DA';
external 'A826.DLL' name 'A826_Uni10_DA';
external 'A826.DLL' name 'A826_DO';
Function A826_DI;
external 'A826.DLL' name 'A826_DI';
Function A826_AD;
external 'A826.DLL' name 'A826_AD';
Function A826_ADs_Hex;
Function A826_ADs_Float;
Function A826_DELAY;
Function A826_Check_Address;
external 'A826.DLL' name 'A826_ADs_Hex';
external 'A826.DLL' name 'A826_ADs_Float';
external 'A826.DLL' name 'A826_DELAY';
external 'A826.DLL' name 'A826_Check_Address';
Function A826_DriverInit;
Procedure A826_DriverClose;
Procedure A826_OutputByte;
Procedure A826_OutputWord;
Function A826_InputByte;
Function A826_InputWord;
external 'A826.DLL' name 'A826_DriverInit';
external 'A826.DLL' name 'A826_DriverClose';
external 'A826.DLL' name 'A826_OutputByte';
external 'A826.DLL' name 'A826_OutputWord';
external 'A826.DLL' name 'A826_InputByte';
external 'A826.DLL' name 'A826_InputWord';
Function A826_GetDriverVersion;
Function A826_InstallIrq;
external 'A826.DLL' name 'A826_GetDriverVersion';
external 'A826.DLL' name 'A826_InstallIrq';
Function A826_GetBuffer;
external 'A826.DLL' name 'A826_GetBuffer';
external 'A826.DLL' name 'A826_GetFloatBuffer';
external 'A826.DLL' name 'A826_GetIntCount';
external 'A826.DLL' name 'A826_AD_INT_Start';
external 'A826.DLL' name 'A826_AD_INT_Stop';
Function A826_GetFloatBuffer;
Function A826_GetIntCount;
Function A826_AD_INT_Start;
Function A826_AD_INT_Stop;
end.
Date: Aug-15-2000
Ver: 2.2
Page 28
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
2.3.3
unit A826U;
interface
A826U.PAS
type PSingle=^Single;
type PWord=^Word;
type PInteger=^Integer;
type PSmallInt=^PSmallInt;
Function A826_AD2F(hex, Gain :Word): Single ; StdCall;
implementation
uses math;
//*-----------------------------------------------------*
//* Return voltage value or -100.0 if any error occurs *
//* or parameter is out of range.
//* Gain : 0-3
*
*
//*-----------------------------------------------------*
Function A826_AD2F(hex, Gain :Word): Single ;
Var
ZeroBase, VoltageRange, FullRange : Single ;
i : Integer ;
Begin
ZeroBase := 0;
FullRange := 32767;
VoltageRange := 10;
i := hex;
if i > $7FFF then
i := ((Not hex) + 1) * -1 ;
Gain := Gain mod 16 ;
If (Gain < 0) Or (Gain > 3) Then
begin
result := -100;
exit;
end;
Result := ((((i - ZeroBase) / FullRange) * VoltageRange) / Power(2, Gain));
End;
end.
Date: Aug-15-2000
Ver: 2.2
Page 29
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
3 Function Description
These functions in DLL are divided into several groups as follows:
1. The test functions
2. The DI/O functions
3. The AD/DA fixed-mode functions
4. The Driver functions
5. The AD Interrupt Mode functions
6. The AD DMA Mode functions
The functions of test listing as follows:
1. SHORT_SUB_2
2. FLOAT_SUB_2
3. A826_Get_DLL_Version
4. A826_GetDriverVersion
The functions of DI/O listing as follows:
1. A826_DI
2. A826_DO
3. A826_InputByte
4. A826_InputWord
5. A826_OutputByte
6. A826_OutputWord
The functions of AD/DA listing as follows:
1. A826_DA
2. A826_AD
3. A826_ADs_Hex
4. A826_ADs_Float
The functions of Driver listing as follows:
1. A826_DriverInit
2. A826_DriverClose
3. A826_DELAY
4. A826_Check_Address
Date: Aug-15-2000
Ver: 2.2
Page 31
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
The functions of AD Interrupt listing as follows:
1. A826_InstallIrq
2. A826_GetIntCount
3. A826_GetBuffer
4. A826_AD_INT_Start
5. A826_AD_INT_Stop
6. A826_GetFloatBuffer
The functions of AD DMA listing as follows:
1. A826_AD_DMA_InstallIrq
2. A826_AD_DMA_RemoveIrq
3. A826_AD_DMA_Start
4. A826_AD_DMA_Stop
5. A826_AD_DMA_IsNotFinished
6. A826_AD_DMA_GetBuffer
7. A826_AD_DMA_GetFloatBuffer
(The DMA function supports the Windows 95/98 only.)
In this chapter, we use some keywords to indicate the attribute of Parameters.
Keyword
Setting parameter by user
before calling this function ?
Get the data/value
from this parameter
after calling this function ?
[Input]
[Output]
[Input, Output]
Yes
No
Yes
No
Yes
Yes
Date: Aug-15-2000
Ver: 2.2
Page 32
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
3.1 TEST Function
3.1.1
SHORT_SUB_2
z Description :
Compute C=nA-nB in short format, Short=16 bits sign integer.
This function is provided for testing purpose.
z Syntax :
short SHORT_SUB_2(short nA, short nB);
z Parameter :
nA : [Input] Short
nB : [Input] Short
z Return Value :
Return = nA - nB Î Short
3.1.2
FLOAT_SUB_2
z Description :
Compute C=fA-fB in float format, float=32 bits floating pointer
number. This function is provided for testing purpose.
z Syntax :
float FLOAT_SUB_2(float fA, float fB)
z Parameter :
fA : [Input] Double value
fB : [Input] Double value
z Return Value :
return= fA - fB Î float value
Date: Aug-15-2000
Ver: 2.2
Page 33
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
3.1.3
A826_Get_DLL_Version
z Description :
Read the software version
z Syntax :
WORD A826_Get_DLL_Version(void);
z Parameter :
Void
z Return Value :
return=0x100 Î Version 1.0
3.1.4
A826_GetDriverVersion
z Description :
This subroutine will get the version number about the virtual device driver.
z Syntax :
WORD A826_GetDriverVersion (WORD *wDriverVersion );
z Parameter :
*wDriverVersion
: [Output] the address of wDriverVersion.
When wDriverVersion=0x210 → version 2.10
z Return Value :
NoError
: successful in opening the device driver
: fail in opening the device driver.
GetDriverVersionError
Date: Aug-15-2000
Ver: 2.2
Page 34
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
3.2 DI/DO Function
3.2.1
A826_Di
• Description :
This subroutine will read the 16 bits data from the digital input port.
• Syntax :
WORD A826_DI(WORD wBase);
• Parameter :
wBase : [Input] I/O port base address, for example, 0x220
• Return Value :
16 bits data read from the digital input port
3.2.2
A826_Do
• Description :
This subroutine will send the 16 bits data to digital output port.
• Syntax :
void A826_DO(WORD wBase, WORD wHexValue);
• Parameter :
wBase
: [Input] I/O port base address, for example, 0x220
: [Input] 16 bits data send to digital output port
wHexValue
• Return Value :
Void
Date: Aug-15-2000
Ver: 2.2
Page 35
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
3.2.3
A826_OutputByte
• Description :
This subroutine will send the 8 bits data to the desired I/O port.
• Syntax :
void A826_OutputByte(WORD wPortAddr, UCHAR bOutputVal);
• Parameter :
wPortAddr
bOutputVal
: [Input] I/O port address, for example, 0x220
: [Input] 8 bits data send to I/O port
• Return Value :
void
3.2.4
A826_OutputWord
• Description :
This subroutine will send the 16 bits data to the desired I/O port.
• Syntax :
void A826_OutputByte(WORD wPortAddr, WORD wOutputVal);
• Parameter :
wPortAddr
: [Input] I/O port address, for example, 0x220
: [Input] 16 bits data send to I/O port
wOutputVal
• Return Value :
void
Date: Aug-15-2000
Ver: 2.2
Page 36
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
3.2.5
A826_InputByte
• Description :
This subroutine will input the 8 bits data from the desired I/O port.
• Syntax :
WORD A826_InputByte(WORD wPortAddr);
• Parameter :
wPortAddr
: [Input] I/O port address, for example, 0x220
• Return Value :
16 bits data with the leading 8 bits are all 0
3.2.6
A826_InputWord
• Description :
This subroutine will input the 16 bits data from the desired I/O port.
• Syntax :
WORD DIO_InputWord(WORD wPortAddr);
• Parameter :
wPortAddr
: [Input] I/O port address, for example, 0x220
• Return Value :
16 bits data.
Date: Aug-15-2000
Ver: 2.2
Page 37
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
3.3 A/D , D/A Functions
3.3.1
A826_AD
• Description :
This subroutine will perform a A/D conversion by polling. The A/D converter is
16 bits for A82PG. This subroutine will compute the result according to the
configuration code.
• Syntax :
float A826_AD(WORD wBase, WORD wChannel, WORD wConfig);
• Parameter :
wBase
: [Input] I/O port base address, for example, 0x220
: [Input] A/D channel number,
wChannel
wConfig
: [Input] Configuration code, refer to 1.2 for detail information
• Return Value :
AdError2
: A/D converter error
Other value
: The floating point value of A/D conversion
3.3.2
A826_DA
• Description :
This subroutine will send the 16 bits data to D/A analog output. The output
range of D/A maybe 0 to 5V or 0 to10V setting by hardware jumper, JP1. The
software can not detect the output range of D/A converter. For examples, if
hardware select -5V, the 0xfff will send out 5V. If hardware select -10V, the
0xfff will send out 10V. The factory setting select 0-5V D/A output range.
• Syntax :
WORD A826_DA(WORD wBase, WORD wChannel, WORD wHexValue);
• Parameter :
wBase
: [Input] I/O port base address, for example, 0x220
: [Input] D/A channel number, validate for 0
: [Input] 16 bits data send to D/A converter
wChannel
wHexValue
• Return Value :
NoError
: no error
DaChannelError
: wChannel value error, validate only for 0
Date: Aug-15-2000
Ver: 2.2
Page 38
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
3.3.3
A826_ADs_Hex
• Description :
This subroutine will perform a number of A/D conversions by polling. This
subroutine is very similar to A826_AD except that this subroutine will perform
wCount of conversions instead of just one conversion. The A/D conversing at the
ISA bus’s max. speed. The sampling rate is about 90K samples/second which
testing under Pentium-133 CPU. After A/D conversing, the A/D data are stored in
a buffer in Hex format. The wBuf is the starting address of this data buffer.
• Syntax :
WORD A826_ADs_Hex(WORD wBase, WORD wChannel, WORD
wConfig,short wBuf[], WORD wCount);
• Parameter :
wBase
: [Input] I/O port base address, for example, 0x220
: [Input] A/D channel number
: [Input] Configuration code,
wChannel
wConfig
please refer to Section 1.2 for detail information
: [Output] Starting address of the data buffer
: [Input] Number of A/D conversions will be performed
wBuf
wCount
• Return Value :
AdError1
: A/D converter error
: Operation is OK
NoError
Date: Aug-15-2000
Ver: 2.2
Page 39
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
3.3.4
A826_ADs_Float
• Description :
This subroutine will perform a number of A/D conversions by polling. This
subroutine is very similar to A826_AD except that this subroutine will perform
wCount of conversions instead of just one conversion. The A/D conversing at the
ISA bus’s max. speed. The sampling rate is about 90K samples/second which
testing under Pentium-133 CPU. Then the A/D data are stored in a data buffer in
Float format. The fBuf is the starting address of this data buffer.
• Syntax :
WORD A826_ADs_Float(WORD wBase, WORD wChannel, WORD wConfig,
float fBuf[], WORD wCount);
• Parameter :
wBase
wChannel
wConfig
fBuf
: [Input] I/O port base address, for example, 0x220
: [Input] A/D channel number
: [Input] Configuration code, refer to 1.2 for detail information
: [Output] Starting address of the data buffer
(in float format)
wCount
: [Input] Number of A/D conversions will be performed
• Return Value :
AdError1
: A/D converter error
: Operation is OK
NoError
Date: Aug-15-2000
Ver: 2.2
Page 40
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
3.3.5
A826_Uni5_DA
• Description :
This subroutine will send the 16 bits data to D/A analog output. The output
range of D/A dependent on setting by hardware jumper, JP1 ( -5v or –10v),
JP10/JP11 (Bipolar or Unipolar). The software can not detect the output range
of D/A converter. This subroutine can be used only when the jumpers settings
are : Unipolar , -5v . The output range is between 0.0v and 5.0v. Please refer
to hardware manual to setting jumpers.
• Syntax :
void A826_Uni5_DA(WORD wBase, WORD wChannel, float fValue);
• Parameter :
wBase
: [Input] I/O port base address, for example, 0x220
: [Input] D/A channel number, validate for 0
: [Input] 16 bits data send to D/A converter
wChannel
fValue
• Return Value :
void
3.3.6
A826_Uni10_DA
• Description :
This subroutine will send the 16 bits data to D/A analog output. The output
range of D/A dependent on setting by hardware jumper, JP1 ( -5v or –10v),
JP10/JP11 (Bipolar or Unipolar). The software can not detect the output range
of D/A converter. This subroutine can be used only when the jumpers settings
are: Unipolar , -10v. The output range is between 0.0v and 10.0v. Please
refer to hardware manual to setting jumpers.
• Syntax :
void A826_Uni10_DA(WORD wBase, WORD wChannel, float fValue);
• Parameter :
wBase
: [Input] I/O port base address, for example, 0x220
: [Input] D/A channel number, validate for 0
: [Input] 16 bits data send to D/A converter
wChannel
fValue
• Return Value :
void
Date: Aug-15-2000
Ver: 2.2
Page 41
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
3.4 Driver Functions
3.4.1
A826_DriverInit
z Description :
This subroutine will open the device driver.
z Syntax :
WORD A826_DriverInit (void);
z Parameter :
Void
z Return Value :
NoError
: successful in opening the device driver
: fail in opening the device driver.
DriverOpenError
3.4.2
A826_DriverClose
z Description :
This subroutine will close the virtual device driver.
z Syntax:
void A826_DriverClose(void);
z Parameter:
void
z Return Value:
void
Date: Aug-15-2000
Ver: 2.2
Page 42
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
3.4.3
A826_DELAY
• Description:
This subroutine will delay wDownCount mS(machine independent timer).
z Syntax:
WORD A826_DELAY(WORD wBase, WORD wDownCount);
• Parameter:
wBase
: [Input] I/O port base address, for example, 0x220
: [Input] Number of mS will be delay
wDownCount
• Return Value:
NoError
: Operation OK
AdError1
: Operation failure
3.4.4
A826_Check_Address
• Description:
This subroutine will detect the A-826PG in I/O base address = wBase.
This subroutine will perform one A/D conversion, if success Æ find a A-826PG.
z Syntax:
WORD A826_Check_Address(WORD wBase);
• Parameter:
wBase
: [Input] I/O port base address, for example, 0x220
• Return Value:
NoError
: Find a A-826PG OK
: Operation failure
AdError1
Date: Aug-15-2000
Ver: 2.2
Page 43
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
3.5 AD, Interrupt functions
3.5.1
A826_InstallIrq
z Description:
This subroutine will install interrupt handler for a specific IRQ level n.
z Syntax:
WORD A826_InstallIrq(WORD wBase, WORD wIrq,
HANDLE *hEvent, DWORD dwCount );
z Parameter:
wBase
: [Input] The I/O port base address for A826 card.
: [Input] The IRQ level .
wIrq
hEvent
dwCount
: [Input] The handle of event object that created by user.
: [Input] The desired A/D entries count for interrupt transfer.
z Return Value:
NoError
: successful
InstallIrqError: fail in install IRQ handler.
3.5.2
A826_AD_INT_Start
z Description:
This subroutine will start the interrupt transfer for a specific A/D channel
and programming the gain code and sampling rate..
z Syntax:
WORD A826_AD_INT_Start(WORD Ch, WORD Gain, WORD c1, Word c2 )
z Parameter:
Ch
Gain
c1,c2
: [Input] the A/D channel.
: [Input] the Gain
: [Input] the sampling rate is 2M/(c1*c2)
z Return Value:
NoError
: successful
INTStartError : fail
Date: Aug-15-2000
Ver: 2.2
Page 44
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
3.5.3
A826_AD_INT_Stop
z Description:
This subroutine will stop the interrupt transfer and remove the installed
interrupt handler.
z Syntax:
WORD A826_AD_INT_Stop(void )
z Parameter:
void.
z Return Value:
NoError
: successful
INTStopError : fail
3.5.4
A826_GetIntCount
z Description:
This subroutine will read the transferred count of interrupt.
z Syntax:
WORD A826_GetIntCount(DWORD *dwVal )
z Parameter:
*dwVal
: [Output] the address of dwVal,
the dwVal is the interrupt transferred count.
z Return Value:
NoError
: successful
GetIntCountError
: fail get interrupt count.
Date: Aug-15-2000
Ver: 2.2
Page 45
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
3.5.5
A826_GetBuffer
z Description:
This subroutine will copy the transferred interrupted data into the user’s
buffer.
z Syntax:
WORD A826_GetBuffer(DWORD dwNum, short wBuffer[] )
z Parameter:
dwNum
: [Input]
: [Output]
the entry no to transfer.
the address of wBuffer,
*wBuffer
z Return Value:
NoError
: successful
: fail
GetBufferError
3.5.6
A826_GetFloatBuffer
z Description:
This subroutine will copy the transferred interrupted data into the user’s
buffer.
z Syntax:
WORD A826_GetFloatBuffer(DWORD dwNum, float fBuffer[] )
z Parameter:
dwNum
*fBuffer
: [Input]
: [Output]
the entry no to transfer.
the address of fBuffer,
z Return Value:
NoError
: successful
: fail
GetBufferError
Date: Aug-15-2000
Ver: 2.2
Page 46
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
3.5.7
Diagram of Interrupt Mode
The 3.5.1 to 3.5.6 are functions to perform the A/D conversion with
interrupt transfer. The flow chart to program these function is giver as follows:
A826_DriverInit
CreateEvent(…)
A826_InstallIrq( … )
………
Initialize the Device-Driver
Install the IRQ
Start the Interrupt Transfer
A826_AD_INT_Start( … )
……
Waiting for the signaled event
object.
WaitForSingleObject( …. )
………..
To copy data into user's buffer
A826_GetBuffer( …. )
……
Stop the interrupt transfer and
remove the interrupt handler.
A826_AD_INT_Stop
CloseHandle( hEvent )
A826_DriverClose
Close the Device-Driver
Date: Aug-15-2000
Ver: 2.2
Page 47
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
Using A826_InstallIrq(…) to install a
interrupt handler for IRQ level n that to
transfer A/D data by interrupt.
Next Loop
Using A826_AD_INT_Start to specify the
A/D channel, gain and sampling rate for this
interrupt transfer, then beginning this transfer.
sampling rate defined by c1,c2
A buffer(ex. BufferA) in Driver will
store the interrupt transferd data. The
buffer is in system area.
ADC
Waiting for the signaled event object by
using WaitForSingleObject( )
INT_Handler( )
BufferA
No
System
Area
Yes
To copy datas in bufferA to a user
defined buffer(ex. BufferB) by using
A826_GetBuffer(..) Then the user can
analysis these data in BufferB
BufferB
Application
Area
Using the A826_AD_INT_Stop() to stop
the interrupt transfer and remove the
interrupt handler.
Date: Aug-15-2000
Ver: 2.2
Page 48
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
3.6 AD , DMA functions
The DMA mechanism supports the Windows 95/98 only.
3.6.1
A826_AD_DMA_InstallIrq
z Description:
This subroutine will install interrupt handler for a specific IRQ Level n and
programming a DMA controller (8237) to handle DMA transfer for DMA Channel
n. Usually, when a DMA transfer finished, a associated IRQ level n occur.
z Syntax:
WORD A826_AD_DMA_InstallIrq(WORD wBase, WORD wIrq, WORD
wDmaChannel );
z Parameter:
wBase
wIrq
: [Input] the I/O port base address for A826 card.
: [Input] the IRQ level n.
wDmaChannel : [Input] the DMA channel.
Usuallly, the wDmaChannel is 1 or 3.
z Return Value:
NoError
: successful in installing the handler
: failure
InstallDMAIrqError
3.6.2
A826_AD_DMA_RemoveIrq
z Description:
This subroutine will remove the interrupt handler installed by.
A826_AD_DMA_InstallIrq(…).
z Syntax:
WORD A826_AD_DMA_RemoveIrq(void )
z Parameter:
void
z Return Value:
NoError
: successful
RemoveDmaIrqError : failure
Date: Aug-15-2000
Ver: 2.2
Page 49
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
3.6.3
A826_AD_DMA_Start
z Description:
This subroutine will allocate a DMA buffer in the system area, and
programming the gain code and sampling rate. then starting the DMA transfer for
a specific A/D channel.
z Syntax:
WORD A826_AD_DMA_Start(WORD Ch, WORD Gain, WORD c1, Word c2,
int Count, WORD wPassOut[ ] )
z Parameter:
Ch
: [Input] the A/D channel.
Gain
: [Input] the Gain code
c1,c2
Count
wPassOut[]
: [Input] the DMA sampling rate is 2M/(c1*c2)
: [Input] the desired A/D entries count for DMA transfer.
: [Output] the debug information.
wPassOut[0] : [Output]
0: successful in starting DMA transfer.
others: fail in starting DMA transfer.
wPassOut[1] : [Output] system DMA buffer ID.
wPassOut[2] : [Output] the I/O port base address.
wPassOut[3] : [Output] the IRQ level for DMA.
wPassOut[4] : [Output] the DMA channel no.
wPassOut[5] : [Output] reserved.
wPassOut[6] : [Output] reserved.
wPassOut[7] : [Output] reserved.
wPassOut[8] : [Output] the last 16 bits of physical address
for DMA buffer in system area.
wPassOut[9] : [Output] the first 16 bits of physical address
for DMA buffer in system area.
z Return Value:
NoError
DmaStartError
: successful
: failure
Date: Aug-15-2000
Ver: 2.2
Page 50
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
3.6.4
A826_AD_DMA_Stop
z Description:
This subroutine will free the allocated DMA buffer that in system area.
z Syntax:
WORD A826_AD_DMA_Stop(void )
z Parameter:
void.
z Return Value:
NoError
: successful
DmaStopError : fail
3.6.5
A826_AD_DMA_IsNotFinished
z Description:
This subroutine is to detect if the DMA have finished.
z Syntax:
WORD A826_AD_DMA_IsNotFinished(void )
z Parameter:
void.
z Return Value:
0: the DMA transfer is finish.
1: the DMA transfer is proceeding.
Date: Aug-15-2000
Ver: 2.2
Page 51
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
3.6.6
A826_AD_DMA_GetBuffer
z Description:
This subroutine will copy the transferred DMA data into the user’s buffer.
z Syntax:
WORD A826_AD_DMA_GetBuffer( short wBuffer[] )
z Parameter:
*wBuffer
: [Output] the address of wBuffer,
z Return Value:
The returned bytes no
DmaGetDataError
: when successful
: failure
3.6.7
A826_AD_DMA_GetFloatBuffer
z Description:
This subroutine will copy the transferred DMA data into the user’s buffer.
z Syntax:
WORD A826_AD_DMA_GetfloatBuffer( float fBuf[] )
z Parameter:
*fBuf
: [Output] the address of fBuf
z Return Value:
The returned bytes no
DmaGetDataError
: when successful
: failure
Date: Aug-15-2000
Ver: 2.2
Page 52
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
3.6.8
Diagram of AD , DMA Mode
The 3.6.1 to 3.6.7 are functions to perform the A/D conversion with DMA
transfer. The flow chart to program these function is giver as follows:
Initialize the Device-Driver
Install the IRQ
Start the Interrupt Transfer
Check if finished of data transfer.
To copy data into user's buffer
Stop the interrupt transfer
Remove the interrupt handler.
Close the Device-Driver
Date: Aug-15-2000
Ver: 2.2
Page 53
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
Using A826_AD_DMA_InstallIrq(…) to
install a interrupt handler for IRQ level n and
programming the DMA controller.
Next Loop
Using A826_AD_DMA_Start to allocate a
system DMA buffer and programming
sampling rate, desired transfer count then
starting the DMA.
Sampling rate define by c1,c2
A buffer(ex. BufferA) in VxD will store
the DMA transferd data. The buffer is in
system area.
ADC
8237
To test if DMA transfer is finish ?
(Using
A826_AD_DMA_IsNotFinished(..)
Function)
INT_Handler( )
BufferA
system
area
No
Yes
To copy datas in bufferA to a user
defined buffer(ex. BufferB) by using
A826_AD_DMA_GetData(..) . Then the
user can analysis these data in BufferB
BufferB
Application
area
Using the A826_AD_DMA_Stop() to
release system DMA buffer.
Using the A826_AD_DMA_RemoveIrq()
to remove IRQ handler.
Date: Aug-15-2000
Ver: 2.2
Page 54
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
4 Program Architecture
Initialize the Device-Driver
A826_DriverInit()
….
A826_InputByte( … )
……..
……..
Access/Control the Device
Access/Control the Device
A826_OutputByte(…)
…..
A826_DriverClose()
Close the Device-Driver
User's Application
Function Call into DLLs
Development
Toolkit
DLLs
Services Call into Kernel-Mode
.VXDs, .SYSs (Device Driver)
Device Control
Hardware Devices
Date: Aug-15-2000
Ver: 2.2
Page 55
Download from Www.Somanuals.com. All Manuals Search And Download.
OME-A-826PG Software Manual [Win 95/98/NT]
5 Contact Us
Technical support is available at no charge as described below. The best
Internet.
When reporting problems, please include the following information:
1) Is the problem reproducible? If so, how?
2) What kind and version of Operation Systems that you running? For example,
Windows 3.1, Windows for Workgroups, Windows NT 4.0, etc.
3) What kinds of our products that you using? Please see the product's manual.
4) If a dialog box with an error message was displayed, please include the full
text of the dialog box, including the text in the title bar.
5) If the problem involves other programs or hardware devices, what devices or
version of the failing programs that you using?
6) Other comments relative to this problem or any Suggestions will be welcomed.
After we received your comments, we will take about two business days to
testing the problems that you said. And then reply as soon as possible to you.
Please check that we have received your comments? And please keeping
contact with us.
E-mail: [email protected]
Web-Site: http://www.omega.com
Date: Aug-15-2000
Ver: 2.2
Page 56
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY/DISCLAIMER
OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a
period of 13 months from date of purchase. OMEGA’s WARRANTY adds an additional one (1) month
grace period to the normal one (1) year product warranty to cover handling and shipping time. This
ensures that OMEGA’s customers receive maximum coverage on each product.
If the unit malfunctions, it must be returned to the factory for evaluation. OMEGA’s Customer Service
Department will issue an Authorized Return (AR) number immediately upon phone or written request.
Upon examination by OMEGA, if the unit is found to be defective, it will be repaired or replaced at no
charge. OMEGA’s WARRANTY does not apply to defects resulting from any action of the purchaser,
including but not limited to mishandling, improper interfacing, operation outside of design limits,
improper repair, or unauthorized modification. This WARRANTY is VOID if the unit shows evidence of
having been tampered with or shows evidence of having been damaged as a result of excessive corrosion;
or current, heat, moisture or vibration; improper specification; misapplication; misuse or other operating
conditions outside of OMEGA’s control. Components which wear are not warranted, including but not
limited to contact points, fuses, and triacs.
OMEGA is pleased to offer suggestions on the use of its various products. However,
OMEGA neither assumes responsibility for any omissions or errors nor assumes liability for any
damages that result from the use of its products in accordance with information provided by
OMEGA, either verbal or written. OMEGA warrants only that the parts manufactured by it will be
as specified and free of defects. OMEGA MAKES NO OTHER WARRANTIES OR
REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESS OR IMPLIED, EXCEPT THAT OF TITLE,
AND ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. LIMITATION OF
LIABILITY: The remedies of purchaser set forth herein are exclusive, and the total liability of
OMEGA with respect to this order, whether based on contract, warranty, negligence,
indemnification, strict liability or otherwise, shall not exceed the purchase price of the
component upon which liability is based. In no event shall OMEGA be liable for
consequential, incidental or special damages.
CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a “Basic
Component” under 10 CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical
applications or used on humans. Should any Product(s) be used in or with any nuclear installation or
activity, medical application, used on humans, or misused in any way, OMEGA assumes no responsibility
as set forth in our basic WARRANTY/DISCLAIMER language, and, additionally, purchaser will indemnify
OMEGA and hold OMEGA harmless from any liability or damage whatsoever arising out of the use of the
Product(s) in such a manner.
RETURN REQUESTS/INQUIRIES
Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE
RETURNING ANY PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN AUTHORIZED RETURN
(AR) NUMBER FROM OMEGA’S CUSTOMER SERVICE DEPARTMENT (IN ORDER TO AVOID
PROCESSING DELAYS). The assigned AR number should then be marked on the outside of the return
package and on any correspondence.
The purchaser is responsible for shipping charges, freight, insurance and proper packaging to prevent
breakage in transit.
FOR WARRANTY RETURNS, please have the
following information available BEFORE
contacting OMEGA:
FOR NON-WARRANTY REPAIRS, consult OMEGA
for current repair charges. Have the following
information available BEFORE contacting OMEGA:
1. Purchase Order number under which the product
was PURCHASED,
1. Purchase Order number to cover the COST
of the repair,
2. Model and serial number of the product under
warranty, and
3. Repair instructions and/or specific problems
relative to the product.
2. Model and serial number of the product, and
3. Repair instructions and/or specific problems
relative to the product.
OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible. This affords
our customers the latest in technology and engineering.
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.
© Copyright 2002 OMEGA ENGINEERING, INC. All rights reserved. This document may not be copied, photocopied,
reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without the
prior written consent of OMEGA ENGINEERING, INC.
Download from Www.Somanuals.com. All Manuals Search And Download.
Where Do I Find Everything I Need for
Process Measurement and Control?
OMEGA…Of Course!
TEMPERATURE
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Thermocouple, RTD & Thermistor Probes, Connectors, Panels & Assemblies
Wire: Thermocouple, RTD & Thermistor
Calibrators & Ice Point References
Recorders, Controllers & Process Monitors
Infrared Pyrometers
PRESSURE, STRAIN AND FORCE
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Transducers & Strain Gages
Load Cells & Pressure Gages
Displacement Transducers
Instrumentation & Accessories
FLOW/LEVEL
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Rotameters, Gas Mass Flowmeters & Flow Computers
Air Velocity Indicators
Turbine/Paddlewheel Systems
Totalizers & Batch Controllers
pH/CONDUCTIVITY
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ pH Electrodes, Testers & Accessories
Benchtop/Laboratory Meters
Controllers, Calibrators, Simulators & Pumps
Industrial pH & Conductivity Equipment
DATA ACQUISITION
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Data Acquisition & Engineering Software
Communications-Based Acquisition Systems
Plug-in Cards for Apple, IBM & Compatibles
Datalogging Systems
Recorders, Printers & Plotters
HEATERS
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Heating Cable
Cartridge & Strip Heaters
Immersion & Band Heaters
Flexible Heaters
Laboratory Heaters
ENVIRONMENTAL
MONITORING AND CONTROL
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Metering & Control Instrumentation
Refractometers
Pumps & Tubing
Air, Soil & Water Monitors
Industrial Water & Wastewater Treatment
pH, Conductivity & Dissolved Oxygen Instruments
M4035/0104
Download from Www.Somanuals.com. All Manuals Search And Download.
|