Getting started
Recording
1
2
3
4
5
6
7
DIGITAL VOICE
RECORDER
Playback
WS-823
WS-822
WS-821
FM radio
Menu
Use with a PC
Other information
Register your product on
www.olympus-consumer.com/
register and get additional
benefits from Olympus!
USER MANUAL
Thank you for purchasing an Olympus digital voice recorder.
Please read these instructions for information about using the product
correctly and safely.
Keep the instructions handy for future reference.
To ensure successful recording, we recommend that you test the record
function and volume before use.
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Preventing accidental file erasure [File Lock]...................................... 61
Sorting files [Sort by].......................................................................... 61
Moving/copying files [Move/Copy]..................................................... 62
Dividing files [File Divide]................................................................... 62
Displaying file or folder information [Property] ................................. 62
Extracting the speaking portions of files of spoken-word content
[Voice Detect] ............................................................................82
Extracting the speaking portions of files of spoken-word content
[Voice Detect] ..................................................................................... 82
Moving/copying files [Move/Copy] ..............................................84
Recording menu [Rec Menu].......................................................63
Selecting the recording sensitivity [Rec Level] ................................... 63
Setting the recording mode [Rec Mode]............................................. 64
Selecting microphone directivity [Zoom Mic]..................................... 64
Reducing noise during recording [Low Cut Filter]............................... 65
Voice-activated recording function [VCVA]......................................... 65
Voice sync recording function [V-Sync. Rec] ....................................... 67
Moving/copying files [Move/Copy]..................................................... 84
Dividing files [File Divide]...........................................................87
Dividing a file [File Divide].................................................................. 87
Setting the USB connection [USB Settings]..................................89
Setting the USB connection [USB Settings]........................................ 89
Formatting recording media [Format].........................................91
Formatting a recording media [Format]............................................. 91
Playback menu [Play Menu]........................................................69
Skipping non-voice portions during playback [Voice Playback]......... 69
Alternating repeatedly between normal and muted playback
6
Use with a PC
[Shadowing]....................................................................................... 69
Reducing noise during playback [Noise Cancel] ................................. 70
Adjusting low volume portions during playback [Voice Balancer] .... 70
Emphasizing voice more clearly [Voice Filter]..................................... 71
Selecting playback modes [Play Mode].............................................. 71
Changing music sound quality [Equalizer] ......................................... 73
Setting a skip space [Skip Space]........................................................ 73
Setting a preset playback settings template [Play Scene].................. 74
PC operating environment .........................................................93
PC connection/disconnection......................................................95
Connecting the voice recorder to a PC................................................. 95
Disconnecting the voice recorder from a PC........................................ 96
Loading a file to a PC ..................................................................97
Usage as external memory of the PC...........................................98
LCD/Sound menu [LCD/Sound Menu]...........................................75
Setting the backlight [Backlight] ....................................................... 75
Adjusting the contrast [Contrast]........................................................ 75
Setting the LED indicator light [LED] .................................................. 75
Turning beeping sound ON/OFF [Beep].............................................. 75
Changing the display language [Language] ...................................... 76
Selecting the speaker output [Speaker] ............................................. 76
7
Other information
Alarm message list.....................................................................99
Troubleshooting ......................................................................101
Recorder care...........................................................................104
Accessories (optional)...............................................................105
Copyright and trademark information......................................106
Safety precautions...................................................................107
Specifications ..........................................................................111
Device menu [Device Menu] .......................................................77
Selecting the recording media [Memory Select]................................ 77
Setting power save mode [Power Save] ............................................. 77
Setting the battery in use [Battery].................................................... 77
Setting the date/time [Time & Date] ................................................. 78
Setting the USB connection [USB Settings]........................................ 79
Restoring the default settings [Reset Settings].................................. 79
Formatting a recording media [Format]............................................. 80
Checking recording media information [Memory Info.]..................... 80
Checking voice recorder information [System Info.] .......................... 80
FM menu [FM Menu]...................................................................81
Selecting the recording sound quality [Rec Mode]............................. 81
Presetting a radio station [Set stations] ............................................. 81
Setting scanning sensitivity [Scan Level]............................................ 81
Selecting the FM radio output [Output] ............................................. 81
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of parts
Recorder
1
2
8
9
0
!
3
4
-
)
@
(
5
#
=
*
$
&
%
^
6
7
q
w
1 Built-in stereo microphone (L)
2 Built-in stereo microphone (R)
3 LED indicator light (LED)
$ 9button
%
^
&
–
button
LIST button
ERASE button
4
MENU/SCENE button
5
F2 button
* `OK button
6 Built-in speaker
( 0button
7 Strap hole
)
STOP (4) button
- Battery/card cover
HOLD switch
8
EAR (earphone) jack
9
MIC (microphone) jack
=
POWER/
0 Display
q USB connector slide lever
!
@
#
F1 button
button
REC (record) (s) button
w USB connector/USB connector
cover (retractable)
+
EN
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of parts
Display
4[Recorder] mode
Folder list display
File list display
File display
1
2
3
1
2
3
1
6
3
0
!
@
#
$
7
8
9
6
5
4
5
5
*
[
]: Modified tone playback indicator
(Low)
1 Recording media indicator
[l]: Internal memory
[m]: microSD card
2 Current folder name
3 Battery indicator
4 Folder name
5 Function button guide display
6 File name
9 Speaker muting indicator ( ) and
*
voice playback indicator (
)
0 Current file number in folder/Total
number of recorded files in folder
! Elapsed recording time or
playback time
@ Remaining memory bar indicator
[
[
]: Playback indicator
]: Voice Detect
or playback position bar indicator
*
# Possible recording time remaining
7 Folder indicator, recording format
or file length
indicator and file lock indicator
$ Level meter or recording date/
8 Voice recorder status indicator
time
[
[
[
[
[
[
[
[
[
]: Recording indicator
]: Recording pause indicator
]: Stop indicator
* WS-823 and WS-822 models only
]: Playback indicator
]: Fast forward indicator
]: Fast rewind indicator
]: Fast playback indicator
]: Slow playback indicator
]: Modified tone playback indicator
(High)
*
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of parts
Display
4[Music] mode
List display 1
File display
List display 2
1
2
3
1
2
3
1
6
3
!
@
#
7
8
4
5
6
5
9
0
5
$
When folder contains only
files
When folder contains files
and folders
1 Recording media indicator
8 Voice recorder status indicator
[l]: Internal memory
[
[
[
[
[
[
[
]: Playback indicator
]: Stop indicator
[m]: microSD card
]: Fast forward indicator
]: Fast rewind indicator
]: Fast playback indicator
]: Slow playback indicator
]: Modified tone playback indicator
(High)
2 Current folder name
3 Battery indicator
4 Folder name or file name
5 Function button guide display
6 File name
*
*
[
]: Modified tone playback indicator
(Low)
[
] Playback indicator
7 Folder indicator, speaker muting
indicator ( ) and file lock (
9 Music title
0 Artist name
)
! Current file number in folder/Total
number of recorded files in folder
@ Elapsed playback time
# Playback position bar indicator
$ File length
EN
* WS-823 and WS-822 models only
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of parts
Display
9 Recording format indicator
0 Elapsed recording time
! Possible recording time
4[FM Radio] mode
WS-823 model only
TIP
Radio reception display
• Pressing and holding the STOP (4)
button while the voice recorder is in
stop mode displays the [Time & date]
and [Remain] (amount of possible
recording time remaining) settings. If
the current date/time is set incorrectly,
see “Setting the date/time [Time &
Date]” (☞P.78).
1
2
3
4
5
6
Radio recording display
1
2
3
4
7
8
6
Indicator display area
9
0
!
Meanings of indicators shown in indicator
display area (same for all modes)
1 Recording media indicator
2 Battery indicator
[
[
[
[
[
[
[
[
]: Rec Level
]: VCVA
3 Preset number being received
4 Radio frequency being received
5 Radio frequency bar indicator
6 Function button guide display
7 Folder indicator
]: V-Sync. Rec
]: Equalizer
]: Low Cut Filter
]: Zoom Mic*1
]: Noise Cancel
]: Voice Balancer*2
Voice Filter*3
8 Voice recorder status indicator
[
] [ ] [ ]: Play Mode
[
]: Recording indicator
[
]: Recording pause indicator
*1 WS-823 model only
EN
*2 WS-823 and WS-822 models only
*3 WS-821 model only
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Setup
After unpacking the voice recorder, follow the steps below to have it ready for use.
1
Getting
Insert the battery
started 1
3
Getting
Turn the power ON
started 2
3
Getting
Select the battery setting
started 3
Select the battery setting to match the inserted battery. Select the setting
for a nickel-metal hydride rechargeable battery or the setting for an alkaline
battery.
3
Getting
started 4
Setting the date/time
Set the voice recorder’s clock for use with file management.
Remove the screen protector
on the display.
EN
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Inserting the battery
Turn the power ON
Before using the voice recorder, insert the
battery in the battery compartment of the
voice recorder.
1
1
While the voice recorder is turned
off, slide the POWER/HOLD switch
in the direction of the arrow.
1
Slide open the battery/card cover
while lightly pressing down on it.
POWER/HOLD
switch
2
Insert a AAA battery, making
sure its positive and negative
terminals are placed correctly.
Slide the battery/card cover
completely closed.
Insert the battery’s
negative terminal first
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Setting the inserted battery
Setting the date/time
1
1
1
Press the
+
/
–
button to select the
Press the 9or 0button to
select the item to set.
type of battery you inserted.
Battery type
2
Press the
+
/
–
button to change
[Ni-MH] (
)
the number.
Select if you inserted an Olympus
nickel-metal hydride rechargeable
battery (model BR404).
[Alkaline] (
)
Select if you inserted an alkaline
battery.
2
Press the `OK button to finalize
the setting.
• To change the setting of another item,
press the 9or 0button to move
the blinking cursor, then press the + or
– button to change the number.
3
Press the `OK button to finalize
the setting.
TIP
NOTE
• You can press the `OK button during
the setting procedure to set the items
entered so far and start the clock.
• You can change the clock display
format. See “Setting the date/time
[Time & Date]” (☞ P.78) for the
procedure.
• See “Setting the date/time”if a time
display with a blinking cursor on
the hour appears in the display after
setting the battery.
EN
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the battery
Charging the battery by connecting to a PC’s USB connector
1
3
After making sure the voice
recorder is stopped, connect the
USB connector to a USB port on a
PC.
WS-823 and WS-822 models
only
NOTE
• Before connecting the USB connector,
release HOLD mode (☞ P.19).
1
Start the PC.
2
Slide the USB connector slide
lever in the direction of the
arrow.
4
Press the `OK button to start
charging the battery.
• When [Battery] (☞ P.77) is set to
[Ni-MH], [Press OK to start charging]
appears on the display. Press the `OK
button while this message is blinking.
• The USB connector extends out. The
USB connector cover is stored inside
the voice recorder.
EN
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the battery
5
Charging has finished when the
battery indicator changes to [ ].
1
Charging time: About 3 hours*
* Approximate time needed to fully
charge a completely flat battery at
room temperature.
Battery charging time will depend on
the amount of remaining power and
the state of the battery.
NOTE
• Never attempt to charge an alkaline
battery, lithium battery or other
primary cell battery. Fluid leakage or
overheating may cause the recorder to
malfunction.
EN
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the battery
Charging the battery by connecting to an AC adapter with a USB connection
(model A514; optional)
1
2
Connect the AC adapter to an AC
power outlet.
WS-823 and WS-822 models
only
NOTE
• Before connecting the AC adapter,
select [AC Adapter] for the USB
connection setting (☞ P.89).
• Before connecting the AC adapter,
release HOLD mode (☞ P.19).
To an AC power
outlet
1
Connect the voice recorder to
the USB connector on the AC
adapter.
3
Press the `OK button to start
charging.
To USB connector
of AC adapter
(model A514)
• When [Battery] (☞ P.77) is set to
[Ni-MH], [Press OK to start charging]
appears on the display. Press the `OK
button while this message is blinking.
EN
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the battery
4
Charging is finished when
Battery full] appears.
NOTE
[
• The power of the PC must be ON to
charge the battery using the USB
connector.
You cannot charge the battery when
the power of the PC is OFF, or the PC
is in standby, sleep or auto power OFF
mode.
When charged with
the power turned off
1
• Do not use a USB hub when charging
the battery by connecting to the PC.
• Before charging the battery, insert the
rechargeable battery provided and set
Displayed when the
battery is fully charged
When charged with
the power turned on
[Battery] to [Ni-MH].
*1
• You cannot charge the battery if [
]
or [
]
*2 is blinking. Charge the battery
in an ambient temperature of between 5
and 35°C (41 and 95°F).
*1 [ ] Ambient temperature is too
low.
*2 [ ] Ambient temperature is too
high
NOTE
• If battery life has become noticeably
short on a full charge, replace the
battery with a new one.
• Use only the Olympus USB connecting
AC adapter model provided (A514).
• Insert the USB connector securely all
the way. Operation will not be normal if
the connection is not made properly.
• Use the USB extension cable provided if
needed (only for WS-823 model).
• Use only a compatible Olympus USB
extension cable. Operation is not
guaranteed if another manufacturer’s
cable is used. Only use the Olympus
USB extension cable with the voice
recorder and never use if a product
from another manufacturer is used.
• To charge the battery with [USB
Settings] set to [Composite], set [USB
Connection] to [Optional] before
connecting the USB cable.
When you select [AC Adapter] for the
[USB Connection] you can charge the
battery (☞ P.89).
EN
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Batteries
NOTE
Rechargeable batteries
• Due to the nature of nickel-metal
hydride rechargeable batteries, new
batteries and batteries not used for an
extended period (one month or more)
may not charge completely. The battery
should become fully charged after
charging and discharging the battery
up to three times.
• Always dispose rechargeable batteries
in the legally prescribed manner. Before
disposing rechargeable batteries that
are not fully discharged, take steps to
prevent shorting such as insulating
their terminals with tape.
Read the information below carefully when
using a nickel-metal hydride rechargeable
battery (model BR404).
1
4Discharging
Rechargeable batteries discharge naturally
when not in use. Be sure to charge the
battery before use.
4Operating temperature
Rechargeable batteries are chemical-based
products. Their performance can vary
even when used within the recommended
operating temperature range. This variation
is normal.
Battery indicator
4Recommended temperature
ranges
As the battery loses its remaining charge, the
battery indicator on the display changes as
follows:
When powering voice recorder: 0 to 42°C
(32 to 107.6°F)
When being charged: 5 to 35°C (41 to 95°F)
During long-term storage: -20 to 30°C (-4
to 86°F)
Use of a rechargeable battery outside the
temperature ranges above may result in
drops in battery performance or life. When
not using the voice recorder for an extended
period, remove the rechargeable battery
before storage to prevent fluid leakage or
rust.
•
[
] indicates there is little remaining
battery charge. Charge the battery or
replace it with a fresh one. When the
battery has run out, [
] and [Battery
low] appear, and operation stops.
EN
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Batteries
• The continuous battery usage time of
a nickel-metal hydride rechargeable
battery that has been used repeatedly will
be reduced due to battery degradation
(☞ P.113).
• The [Battery] screen appears automatically
after you have replaced the battery. You can
also use a menu operation to display this
screen and set the battery (☞ P.77).
Battery precautions
• The voice recorder does not support
manganese batteries.
• Always turn power off before replacing
the battery. Files may be damaged if the
battery is removed while the voice recorder
is recording or performing an operation
such as erasing a file.
1
• You may need to reset the date/time if
the battery is removed from the voice
recorder for over one minute, or if the
battery is quickly removed and replaced.
See “Setting the date/time [Time & Date]”
(☞ P.78) for the procedure.
• When not using the voice recorder for
an extended period, always remove the
battery before storage.
• When replacing the battery, use an AAA
alkaline dry cell battery or an Olympus
nickel-metal hydride rechargeable battery
(model BR404).
• When buying rechargeable batteries,
always select model BR404 nickel-metal
hydride rechargeable batteries. Operation
is not guaranteed. If a battery from another
manufacturer is used.
• Even if the battery indicator is [ ],
playback with the built-in speaker at some
volumes may result in a drop in battery
output voltage, causing the voice recorder
to reset. Lower the volume in this case.
• The continuous battery usage time is
reduced when using a microSD card
(☞ P.113).
• The continuous battery usage time will
vary depending on the performance of the
battery in use (☞ P.113).
EN
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting/removing a microSD card
The voice recorder has its own internal memory, and also supports standard microSD cards
(microSD, microSDHC) sold separately.
1
Inserting a microSD card
•
The recording media selection screen
appears after a microSD card has been
inserted.
1
While the voice recorder is in
stop mode, open the battery/
card cover.
4
5
To record onto the microSD card,
press the +/– button and select
[Yes].
• The microSD card slot is inside the
battery/card cover.
Press the `OK button to finalize
the setting.
2
Insert a microSD card, making
sure it is placed correctly as
shown.
TIP
• You can also select the internal memory
• Insert the microSD card straight,
avoiding crooked insertion.
• Inserting a microSD card the wrong
way or crookedly could damage its
contact surface or cause it to jam in
the slot.
• A microSD card not inserted fully (until
it clicks into place) might not record
data.
as the recording media (☞ P.77).
NOTE
• The voice recorder may not be able to
recognize a microSD card formatted
(initialized) for a PC or other device.
Before using a microSD card, always
initialize it on the voice recorder
(☞ P.91).
EN
3
Close the battery/card cover.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting/removing a microSD card
Removing a microSD card
1
1
While the voice recorder is in
stop mode, open the battery/
card cover.
NOTE
• MicroSD cards may pop out forcefully
on removal if you flick or release your
finger too quickly after pressing the
card in.
• Depending on the card’s manufacturer
and type, some microSD cards and
microSDHC cards may not be fully
compatible with the voice recorder and
not be recognized properly.
• For microSD card compatibility under
Olympus verification, please contact
our customer support at:
2
Release the microSD card by
pressing it inward, then letting it
slowly return.
http://www.olympusamerica.com
Note that our customer support will
provide information on microSD card
manufacturers and card types for which
Olympus has verified operation, but
will not guarantee it's performance.
Also note that some cards may
no longer be recognized correctly
by the voice recorder in case
card manufacturer changes card
specifications.
• Read the operating instructions
provided with the card when using a
microSD card.
• The microSD card moves outward and
stops. Pull the microSD card out with
your fingertips.
• [Internal memory selected] is
displayed after removing a microSD
card if [Memory Select] was set to
[microSD card].
• If a microSD card is not recognized by
the voice recorder, try removing and
reinserting the card to have the voice
recorder attempt recognition again.
• Processing speed may be low for
some microSD card types. Processing
performance may also be reduced by
writing or deleting data repeatedly
from a microSD card. In this case,
reinitialize the card (☞ P.91).
EN
3
Close the battery/card cover.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Preventing accidental operation
Setting the voice recorder to HOLD mode maintains the current operation and disables button
operations. HOLD mode is a handy feature for preventing unintentional operation from
accidental button presses when the voice recorder is carried in a bag or pocket. It is also useful
for preventing the voice recorder being accidentally stopped during recording.
1
Setting HOLD mode
Releasing HOLD mode
1
1
Slide the POWER
/
HOLD switch to
Slide the POWER
/HOLD switch to
the [HOLD] position.
position A shown below.
• [Hold] appears in the display, and the
recorder enters HOLD mode.
NOTE
• When any button is pressed during HOLD mode, [Hold] appears in the display for 2
seconds. No other operation is performed.
• Setting HOLD mode during voice recorder playback (or recording) continues the playback
(or recording) operation and prevents any other operation from being performed (the
voice recorder stops when playback ends, or recording stops when there is no more
available memory).
EN
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the power OFF
Turning the power OFF
Existing data, mode settings and the clock setting are saved when the power is turned OFF.
1
1
Slide the POWER/HOLD switch in
the direction of the arrow for at
least half a second.
Power Save mode
When the voice recorder has been
stopped for at least 10 minutes (default
setting) after power ON, the display
disappears and the voice recorder
automatically enters the Power Save
mode (☞ P.77).
•
Pressing any button releases the
Power Save mode.
• The playback stop position at power
OFF is stored in memory.
TIP
• Turning the power OFF whenever the
voice recorder is not in use minimizes
battery consumption.
EN
20
Download from Www.Somanuals.com. All Manuals Search And Download.
[Home] screen operations
Selecting the mode
In addition to its recording function, the voice recorder also provides music player and FM
radio* functions. Choose the application you want by selecting one of the voice recorder’s
1
modes.
* WS-823 model only
1
3
Press the F1 (HOME) button to
display the [Home] screen.
Press the `OK button.
For WS-823 model
For WS-822 and
WS-821models
2
Press the
button to select the desired
mode.
+/–, 9or 0,
• In WS-822 and WS-821 models, you
can only use the 9or 0button
to select modes.
EN
21
Download from Www.Somanuals.com. All Manuals Search And Download.
[Home] screen operations
When [Recorder] is selected
The voice recorder enters
[Recorder] mode. Audio
can be recorded with the
built-in microphone.
Files recorded with the
microphone or from the
FM radio* can also be
played back (☞ P.26,
P.34).
1
When [Music] is selected
The voice recorder enters
[Music] mode. In this
mode you can play music
files transferred to the
voice recorder (☞ P.34).
When [Calendar Search] is selected
The voice recorder enters
[Calendar Search]
mode. In this mode you
can search for files by
specifying the recording
date (☞ P.44).
When [FM Radio]* is selected
The voice recorder enters
[FM Radio] mode. In this
mode you can listen to FM
radio (☞ P.48, P.51).
* WS-823 model only
EN
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Folders
In addition to its own internal memory, the voice recorder can also use microSD cards as a data
recording media. Sound files, music files and content files stored on either media are saved in
folders arranged in a tree structure. You can specify any playback sequence for the music files in
the [Recorder] and [Music] folder (☞ P.61).
1
Folders for voice recordings
Folders for music playback
Sound files recorded by the voice recorder
are saved in the folders labeled [Folder A] to
[Folder E] in the [Recorder] folder.
When music files created using Windows
Media Player are transferred to the voice
recorder, folders are created automatically for
them within the folder for music playback,
using the hierarchical structure shown below.
Select the mode in the [Home]
Home
screen.
Home
Recorder
Folder A
Music
First level
Artist 01
001
002
Second level
Album 01
200
Each folder can store up to 200 files.
001
002
Folder
Folder B
Folder C
Folder D
Folder E
200
Each folder can store
up to 200 files.
File
Recordings made with the
microphone are saved here.
Up to 300* folders can be created within the [Music]
folder (including a [Music] folder itself).
* Up to 130 folders for WS-821 model.
FM Radio
Recordings from the radio are saved
here (WS-823 model only).
The voice recorder can only recognize two folder
sublevels.
Files and folders placed directly within the
[Recorder] folder (not within one of the sub-folders)
are not displayed by the voice recorder.
EN
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting folders and files
You can select a different folder while the voice recorder is in stopped or playing a file. See
“Folders” (☞ P.23) for a description of the voice recorder’s hierarchical folder structure.
[Home] screen
Folders for voice recordings
1
Example: WS-823
model
Folder list
display
File list display
File display
Folders for music playback
Folder list
display
File list display
File display
When [Music] mode is selected
Forward: `OK button
TIP
Each press of the `OK button opens the
currently selected folder or file in the
list, moving forward to the next (lower)
level in the folder hierarchy. When a list
is displayed, you can perform the same
function by pressing the 9button.
• When navigating through a folder
hierarchy, you can press and hold the
LIST button to return to the file display.
Back: LIST button
Each press of the LIST button moves back
to the previous (higher) level in the folder
hierarchy. When a list is displayed, you can
perform the same function by pressing
the 0button.
EN
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting folders and files
+
/–
button
Used to select a folder or file.
1
[
Home] screen
Used to select the voice recorder mode
(☞ P.21).
List display
Displays the folders and files recorded in
the voice recorder.
Pressing the F2 (FOLDER) button changes
the display to the list display of the next
folder.
File display
Displays the information of the selected file.
EN
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Recording
The voice recorder has five folders ([&] to [*]) in which recorded files can be saved. These
folders provide a handy way to sort recordings into separate categories (such as business and
leisure).
2
Basic recording procedure
1
4
Press the
+
/
–
, 0or 9
Press the REC (s) button to start
button in the [Home] screen and
select [Recorder], then press the
`OK button (☞ P.21).
recording.
a
b
c
d
e
2
3
Select the folder to save the
recording in (☞ P.24).
• Each new voice recording file is saved
in the selected folder.
a
Rec Mode
b Elapsed recording time
c Remaining memory bar indicator
d Remaining possible recording time
e Level meter (changes according to
recording volume and recording
function setting)
Point the built-in microphone
in the direction of the sound to
record.
• The LED indicator light lights, and [K]
appears in the display.
5
Press the STOP (4) button when
you want to stop recording.
f
f
File length
• [L] appears in the display.
EN
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
NOTE
Sound files recorded with the voice
recorder are automatically given a file
name in the format below.
• To prevent the beginning of the
recording being cut off, start recording
after the LED indicator light has lit or
mode indicator has appeared in the
display.
_
131001 0001.WMA
2
• When the remaining possible recording
time is 60 seconds, the LED indicator
light starts flashing. It flashes more
rapidly as the remaining time decreases
(at the 30- and 10-second points).
• When [Folder full] appears, no more
recording can be done. To record more,
you will need to select a different folder
or delete unneeded files (☞ P.46).
• If [Memory full] appears, the voice
recorder has no more available
memory space. You will need to
delete unneeded files to record more
(☞ P.46).
1
2
3
1Date recorded
Indicates the year, month and day the
recording was made.
2File number
Appended file numbers are
consecutive regardless of whether the
recording media has been switched.
3Extension
A file extension indicating the
recording format the file was recorded
in by the voice recorder.
• When using a microSD card in the voice
recorder, be sure the desired recording
media setting ([Internal memory]
or [microSD card]) has been selected
(☞ P.77).
•
•
•
Linear PCM format: “.WAV”*
MP3 format: “.MP3”
WMA format: “.WMA”
* WS-823 and WS-822 models only
• If a folder other than folders &to *is
selected when the REC (s) button is
pressed, the blinking message [Cannot
record in this folder] appears. Redo
the recording operation after selecting
one of folders &to *.
TIP
• [Rec Mode] must be set with the voice
recorder stopped (☞ P.81).
• Pressing the REC (s) button while
[Recorder] is selected on the [Home]
screen will allow you to start recording.
The recorded file will be saved to
[Folder A].
• It’s recommended to initialize the
recording media before making an
important recording.
• Processing performance may
be reduced when data has been
repeatedly written to or deleted from
the recording media. Please initialize
the recording media in this case
(☞ P.91).
WS-823 model only
• You can record radio broadcasts by
selecting [FM Radio] mode (☞ P.56).
• You can adjust the recording level
manually to match your application
(☞ P.63).
EN
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Recording linear PCM format files of over
2 GB
Pausing/resuming recording
1
Press the REC (s) button during
recording.
WS-823 and WS-822 models
only
2
When recording a linear PCM format file,
recording will continue even after the file size
exceeds 2 GB.
•
The data is divided and saved in separate
files of up to 2 GB. The files are processed
as multiple files during playback.
After recording 200 files which exceed 2GB
recording stops.
• Recording pauses, and the [≠]
indicator appears in the display along
with the blinking message [Rec
pause].
•
• Recording is stopped automatically
after being paused for at least 60
minutes.
2
Press the REC (s) button again
while recording is paused.
• Recording resumes from the position it
was paused at.
Quickly checking a recording
1
Press the `OK button during
recording.
• [•] appears in the display.
• Recording ends, and the file just
recorded is played.
WS-823 model only
• When this operation is done while
recording in [FM Radio] mode, [Recorder]
mode is automatically selected and the file
just recorded will be played.
EN
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Recording settings
Monitoring while recording
Various recording settings are available,
letting you tailor recording to different
recording conditions.
You can monitor the recording as you are
making it by listening on the earphone
plugged into the voice recorder’s EAR jack.
Use the +/– button to adjust the recording
monitor volume.
[
Rec Level]
Sets the recording sensitivity.
2
(☞ P.63)
*1
[
Rec Mode
(☞ P.64)
]
Sets the recording sound
quality.
*2
1
Connect the earphones to the
voice recorder’s EAR jack.
[
Zoom Mic
(☞ P.64)
]
Sets the built-in stereo
microphone’s directivity.
Reduces humming sounds
from equipment such as
air-conditioners or projectors.
[
Low Cut Filter]
(☞ P.65)
Sets the trigger level for
voice-activated recording
(VCVA).
[
VCVA]
To EAR
jack
(☞ P.65)
[
V-Sync. Rec
(☞ P.67)
]
Sets the trigger level for
voice-synchronized recording.
Used to select one of multiple
preregistered templates of
recording settings. When
selected, each template
enters several settings
tailored to a particular
recording location or
condition all in a single
operation.
[
Rec Scene]
(☞ P.32)
*1 When [FM Radio] mode is set, [Rec Mode]
is fixed at one of the settings below
(WS-823 model only).
• Changing the volume will not affect
the recording level.
•
[MP3 256 kbps]
NOTE
•
[MP3 128 kbps]
• To avoid unpleasantly loud sound, set
the volume to [00] before plugging in
the earphone.
*2 WS-823 model only
• To prevent feedback, do not place the
earphone near the microphone while
recording.
EN
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording with an external microphone
Recording with an external microphone
You can record audio input using an external microphone or other device connected to the
voice recorder’s microphone jack. Do not plug or unplug devices into voice recorder jacks while
recording.
2
1
Connect an external microphone
to the voice recorder’s MIC jack.
NOTE
• Connecting an external microphone to
the voice recorder’s MIC jack disables
the built-in microphone.
• Microphones with plug-in power
supplies can be used.
• When [Rec Mode] is set to stereo,
recording with an external mono
microphone records on the left channel
only (☞ P.64).
To MIC jack
• When [Rec Mode] is set to mono,
only the input from the left channel
microphone is recorded when using an
external stereo microphone (☞ P.64).
2
Start recording.
• See “Recording” (☞ P.26) for
descriptions of recording operations.
TIP
• See “Accessories (optional)”
(☞ P.105) for the compatible external
microphones.
EN
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording from another connected device
Recording audio from another
device with this recorder
Recording audio from this recorder
with another device
Audio can be recorded when you have
connected the audio output terminal
(earphone jack) of another device and
the MIC jack of the recorder using the
connecting cord KA333 (optional) for
dubbing.
Audio from this recorder can be recorded
to another device by connecting the audio
input terminal (microphone jack) of the other
device and the EAR jack of this recorder using
the connecting cord KA333 (optional).
2
To audio input terminal
of other device
To MIC
jack
To audio output terminal
of other device
To EAR
jack
NOTE
• When recording from a connected
external device, perform a test
recording and adjust the output level
of the connected device as needed.
NOTE
• Adjusting playback sound quality
settings on the voice recorder affects
the audio output signals output from
the EAR jack (☞ P.69 to P.73).
EN
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the recording scene [Rec Scene]
Changing the recording scene
The voice recorder has preregistered templates of optimum settings tailored to various
recording applications such as lectures and dictation. When selecting one of these templates
you can enter several settings recommended for your recording application all in a single
operation.
2
1
While the voice recorder is in stop
TIP
mode, press and hold the MENU
/
• You can press the 9button to
display the settings of the selected
template. Press the 0button to
return to the [Rec Scene] screen.
SCENE button.
4
5
Press the `OK button to finalize
the setting.
Press the STOP (4) button to exit
the selection screen.
2
3
Press the `OK button.
Press the
+/–
button to select the
Rec Scene
desired recording application.
• Press and hold the STOP (4) button
when the recorder is stopped to check
setting indicators meanings.
NOTE
• Recording menu settings cannot be
changed when a [Rec Scene] selection
has been made. To use these functions,
you must select [Off] for the [Rec
Scene] setting.
EN
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the recording scene [Rec Scene]
Preregistered [Rec Scene] settings
[
Lecture
]
[
Dictation]
[
[
[
[
[
[
Rec Level
]
[
[
[
[
[
[
High
MP3 128 kbps
+6
On
]
[
[
[
[
[
[
Rec Level
]
[
[
[
[
[
[
Low
]
Rec Mode
]
]
Rec Mode
]
MP3 128 kbps]
2
Zoom Mic]*
Low Cut Filter
]
Zoom Mic]*
Low Cut Filter
Off]
]
]
]
On]
VCVA
]
Off]
]
VCVA
]
Off
]
]
V-Sync. Rec
]
Off
V-Sync. Rec
]
Off
[
Conference
]
[
DNS]
[
[
[
[
Rec Level
Rec Mode
Zoom Mic]*
Low Cut Filter
VCVA
V-Sync. Rec
]
[
[
[
[
Middle
]
[
[
[
[
[
[
Rec Level
]
[
[
[
[
[
[
Low
MP3 128 kbps
Off
Off
]
]
MP3 128 kbps
]
Rec Mode
]
]
Off]
Zoom Mic]*
Low Cut Filter
]
]
]
]
On]
VCVA
]
Off]
]
[
[
]
[Off
]
]
V-Sync. Rec
]
Off
]
[
Off
* WS-823 model only
[Meeting]
[
[
[
[
[
[
Rec Level
]
[
[
[
[
[
[
Middle
]
Rec Mode
]
MP3 128 kbps
]
Zoom Mic]*
Low Cut Filter
Off]
Off]
Off]
Off]
]
VCVA
]
V-Sync. Rec
]
EN
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Playback
In addition to files recorded by the voice recorder, you can also play files in WAV*, MP3 and
WMA format transferred from a PC.
* WS-823 and WS-822 models only
Basic playback procedure
3
a Recording media indicator, file name
and folder indicator
b Elapsed playback time
1
Select the file to play from the
folder containing it (☞ P.24).
TIP
c Playback position bar indicator
d
e
File length
Recording date/time
• Files are saved in the locations
below.
• [•] appears in the display.
Files recorded with the built-in
microphone:
3
Press the
+/
–
button to adjust
[Recorder] folders (folders &to
*)
the volume to the desired level.
Files recorded from the radio:
[Recorder] folder ([FM Radio]
folder)
*
Music files transferred from a PC:
[Music] folder
* WS-823 model only
• The volume can be adjusted to a
setting between [00] to [30]. The
higher the number, the louder the
volume.
2
Press the `OK button to start
playback.
4
Press the STOP (4) button to stop
playback.
a
b
c
• [L] appears in the display.
• The file being played stops right away.
The resume function automatically
stores the playback stop position in
memory. The position is retained even
if the power is turned OFF. The next
time the power is turned ON, playback
can be resumed from the stop position
stored in the memory.
d
e
EN
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Playback settings
Playback through the earphones
You can select various file playback methods
tailored to different applications and tastes.
You can connect the earphones to the voice
recorder’s EAR jack and listen to playback
through them.
*1 *3
[
Voice Playback
]
Only plays voice portions of
a recorded audio file.
(☞ P.69)
1
Connect the earphones to the
voice recorder’s EAR jack.
Plays segments of files,
alternating repeatedly
between playback and
silence.
[
Shadowing]
(☞ P.69)
3
A setting that makes
recorded voices more
discernable when muffled
by projector noise or similar
sounds.
To EAR
jack
*3
[
Noise Cancel]
(☞ P.70)
Compensates low-volume
portions of recorded audio
files during playback.
*1 *3
[
Voice Balancer]
(☞ P.70)
Cuts low- and high-
frequency components,
emphasizing voices for
greater clarity.
*2 *3
[
Voice Filter]
(☞ P.71)
2
Press the `OK button to start
[
Play Mode
(☞ P.71)
]
Selecting from among three
playback modes.
playback.
*4
Adjusts the quality of sound
as desired.
[
Equalizer]
(☞ P.73)
TIP
A handy function for quickly
moving the playback
position, and playing short
segments repeatedly.
• There will be no sound from the
speaker when the earphones are
connected.
[
Skip Space]
(☞ P.73)
Selecting a package of
settings recommended for
your recording application
in a single operation.
[
Play Scene]
NOTE
(☞ P.74)
• To avoid unpleasantly loud sound, set
the volume to [00] before plugging in
the earphone.
• Avoid excessive volume when listening
to playback through the earphones.
It may cause hearing damage or loss.
Improves operability.
*1 WS-823 and WS-822 models only
*2 WS-821 model only
*3 Function active only in [Recorder] mode.
*4 Function active only in [Music] mode.
EN
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Fast-forwarding
Rewinding
3
Fast-forwarding while the voice
recorder is in stop mode
Rewinding while the voice recorder is
in stop mode
1
1
1
With the voice recorder stopped,
With the voice recorder stopped,
press and hold the 9button.
press and hold the 0button.
• [ß] appears in the display.
• Fast-forwarding stops when you
release the 9button. Press the
`OK button to start playback from the
current position.
• [™] appears in the display.
• Rewinding stops when you release the
0button. Press the `OK button
to start playback from the current
position.
Fast-forwarding during playback
Rewinding during playback
Press and hold the 9button
during playback.
1
Press and hold the 0button
during playback.
• Playback starts from the current
position when you release the 9
button.
• If an index mark or temp mark in the
file is reached, fast-forwarding stops at
the mark (☞ P.43).
• Fast-forwarding stops when the end
of the file is reached. Press and hold
the 9button again to fast-forward
from the beginning of the next file.
• Playback starts from the current
position when you release the 0
button.
• If an index mark or temp mark in the
file is reached, rewinding stops at the
mark (☞ P.43).
• Rewinding stops when the beginning
of the file is reached. Press and hold
the 0button again to rewind from
the end of the previous file.
EN
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
NOTE
Skipping to the beginning of a file
• If an index mark or temp mark
is reached when skipping to the
beginning of a file during playback,
playback starts from the position of the
mark. When skipping to the beginning
of a file while the voice recorder is
in stop mode, the mark is ignored
(☞ P.43).
• If a setting other than [File Skip]
is set for [Skip Space], playback
starts after the set amount of time
has been skipped backwards or
forwards. Playback does not skip to the
beginning of the file.
3
Skipping to the beginning of the
next file
1
1
1
Press the 9button while the
voice recorder is in stop mode, or
during playback.
Skipping to the beginning of the
current file
Press the 0button while the
voice recorder is in stop mode, or
during playback.
Skipping to the beginning of the
previous file
Press the 0button when
the playback position is the
beginning of the file.
• To skip to the beginning of the
previous file during playback, press the
0button twice consecutively.
EN
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Music files
Changing the playback speed/tone
(voice changer*)
If a music file transferred to the voice recorder
is unplayable, check that its sampling rate,
bit count and bit rate values are within the
supported ranges. The sampling rate, bit
count and bit rate combinations supported
for music file playback by the voice recorder
are shown below.
You can change the playback speed and
audio tone*. Changing the playback speed
is handy for speeding up conference
presentations, or for slowing down parts
difficult to discern when learning a language.
* WS-823 and WS-822 models only
3
Bit count/
File format
Sampling rate
bit rate
1
2
Press the `OK button during
playback.
WAV format* 44.1 kHz
16 bits
MPEG 1 Layer 3:
32 kHz,
44.1 kHz,
48 kHz
MPEG 2 Layer 3:
16 kHz,
22.05 kHz,
24 kHz
MP3 format
8 to 320 kbps
5 to 320 kbps
Press the
button.
+/–, 9or 0
8 kHz,
11 kHz,
16 kHz,
WMA format 22 kHz,
32 kHz,
44.1 kHz,
48 kHz
* WS-823 and WS-822 models only
• MP3 files with variable bit rates (bit rates
converted variably in a single file) may not
play normally.
• Linear PCM-format WAV files are the
only WAV files the voice recorder can
play. Playback of other WAV files is not
supported.
9or 0button:
Adjust the playback speed.
+/– button:
Adjust the audio tone* (voice
changer).
* WS-823 and WS-822 models only
• Even if the file formats is compatible for
playback on this recorder, the recorder does
not support every encoder.
EN
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
3
Press the `OK button.
Fast playback restrictions
Depending on their sampling frequency and
bit rate, some files may not play normally.
In this case, you will need to reduce the
playback speed.
Playback speed/
tone indicator
3
TIP
• When speech is still difficult to discern
after changing the playback speed,
changing the tone may help.
• When the speed/tone changing
function and [Play Scene] function
have both been selected, the [Play
Scene] setting takes precedence.
The [Play Scene] settings cannot be
changed (☞ P.74).
• When changing the playback speed/
tone, playback operations such as
stopping playback, skipping to the
beginning of a file, and writing index
marks/temp marks are the same as
during standard playback.
NOTE
• Altered playback speed/tone settings
are retained even after power OFF.
• Changing the playback speed and tone
will make the battery deplete more
quickly.
• The function below cannot be used
when changing the playback speed/
tone.
•
[Noise Cancel] (☞ P.70)
EN
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
ABC repeat playback
The voice recorder has a function that lets you repeat the playback of a portion (segment) of
the file being played. In addition to the A-B repeat function available from previous models, the
segment to repeat can be changed during repeat playback. There is also a shadowing playback
function handy for language learning that can be used during ABC repeat playback. The
[Shadowing] setting must be set to [On] before you can use the shadowing playback function
(☞ P.69).
3
5 These steps can be repeated to re-specify
ABC repeat playback
a new segment to be played back
repeatedly up to the end of the file.
1
2
Select a file for ABC repeat
playback, and start playback.
Press the F1 (ABC) button when
playback reaches the desired
start position for ABC repeat
playback.
1Select the starting point for repeat
playback (A) during playback.
2 When the ending point (B) is selected,
repeat playback starts.
3 When the starting point for repeat
playback (A) is canceled during repeat
playback, the ending point of the segment
(B) becomes the new starting point and
playback continues.
• If [Shadowing] has been set, the [
]
or [
] indicator appears.
4 When the ending point (C) is selected,
repeat playback starts again.
EN
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
ABC repeat playback
Specifying new starting/ending
points
TIP
• You can change the playback
speed (☞ P.38), and fast-forward/
rewind (☞ P.36) when the [B]
indicator is blinking.
• If playback reaches the end of
the file when the [B] indicator
is blinking, the end of the file
is treated as the segment end
position, and repeat playback
starts.
4
Press the F1 (CANCEL A) button
during ABC repeat playback.
3
3
Press the F1 (SET B) button again
when playback reaches the
desired end position for ABC
repeat playback.
• Segment A-B is canceled. [
]
becomes the new start position, and
playback continues.
• You can change the playback speed
(☞ P.38), and fast-forward/rewind
(☞ P.36).
• The shadowing playback function is
disabled.
• Segment A-B is set, and ABC repeat
playback starts.
• If [Shadowing] has been set, the
repeat segment is played with the
volume muted or lowered after it
has been played at the usual volume.
These operations are repeated until
canceled.
Stopping ABC repeat playback:
☞ Go to Step ]
Specifying new starting/ending
points:
☞ Go to Step [
EN
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
ABC repeat playback
5
Press the F1 (SET C) button at the
desired end position for ABC
repeat playback.
Canceling ABC repeat playback
1
Press the F2 (CNCL ABC) button.
3
• Segment B-C is set, and ABC repeat
playback starts.
• The shadowing playback function is
enabled.
• If pressed when ABC repeat playback is
stopped, cancels ABC repeat playback.
• If pressed during ABC repeat playback,
cancels the playback segment setting
for the function, and continues
TIP
• You can repeat Steps 4 and 5 as
needed to change the repeat
segment as desired.
standard playback.
NOTE
• If you change the file or switch to
different display screen, ABC repeat
playback is canceled.
6
Press the STOP (4) button.
• Playback stops. The playback segment
specified for this function is retained.
NOTE
• You cannot change the end position
of a repeat playback segment to a
position before the start position.
• You cannot write index marks or temp
marks during ABC repeat playback
(☞ P.43).
EN
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Index marks/temp marks
Writing an index mark or temp mark in a file enables you to quickly access desired position in
the file with the same operations used for fast-forwarding, rewinding or skipping to the start
of a file. Index marks can only be written in files created with Olympus voice recorders. For files
created with other devices, you can temporarily store desired positions in the memory using
temp marks.
Writing an index mark/temp mark
Erasing an index mark/temp mark
3
1
1
When the desired position has
been reached press the F2
button to write an index mark or
temp mark.
Select a file that contains index
mark/temp mark you want to
erase and start playback.
(
INDEX)
2
Use the 9or 0button to
select the index mark/temp mark
you want to erase.
NOTE
• Temp marks are temporary
markings. They are automatically
erased when you select a different
file, transfer the file to a PC, or
move the file on a PC.
• You can write up to 99 index
marks/temp marks in a single
file. The message [No more can
be set] appears if you attempt to
write more than 99 marks.
3
When the number of the index
mark/temp mark to erase is being
shown (for about 2 seconds)
in the display, press the ERASE
button.
• Any subsequent index marks/temp
marks in the file are automatically
renumbered.
• You cannot write or erase index
marks/temp marks in files that
have been locked by the file lock
function (☞ P.61).
EN
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Calendar Search function
Using the Calendar Search function to search for a file
You can search for voice files by specifying a recording date. If you have forgotten in which
folder a file has been saved, this feature lets you access it quickly by entering its recording date.
• Dates on which files were saved are
underlined.
9or 0button:
Move to the previous/next date. Press
and hold to skip to the next date on
which a file was recorded.
+/– button:
1
2
Press the F1 (HOME) button to
display the [Home] screen.
3
Press the
+/–, 9or 0
button to select [Calendar
Search].
Move to the previous/next week.
F1, F2 button:
Move to the previous/next month.
• Press the STOP (4) button to cancel
the setting and return to the [Home]
screen.
5
Press the `OK button.
• On WS-822 or WS-821 model, use
the 9or 0button to select
[Calendar Search].
3
4
Press the `OK button.
Press the
+/–, 9or 0
button to select the desired date.
6
7
Press the
+
/
–
button to select the
a
desired file.
b
c
Press the `OK button to start
playback.
d
NOTE
• You can only search for files saved in
the folders for voice recording ([&] to
[*] and [FM Radio]* folders).
a Number of files saved (recorded) on
selected date
b
Today’s date
c Date file was recorded
Selected date
* WS-823 model only
d
EN
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting preset playback settings template [Play Scene]
Selecting a preset playback settings template
This voice recorder has 2 preregistered template [Transcription] and [Language study], with
optimum settings tailored to such playback scenes. Selecting one of these templates lets you
enter several settings recommended for your recording application all in a single operation.
See “Setting a preset playback settings template”for how to set playback settings packages
(☞ P.74).
3
1
4
While the voice recorder is in stop
mode or playing a file, press and
hold the MENU/SCENE button.
Press the
desired preset playback settings
package.
+
/
–
button to select the
• If you pressed the MENU/SCENE
5
Press the `OK button to finalize
the setting.
button during playback, go to Step [.
2
3
Press the
+/
–
button to select
[
Play Scene].
Press the `OK button.
TIP
• If you selected a preset playback
settings template while the voice
recorder is in stop mode, press the
STOP (4) button to exit the menu
screen.
EN
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Erasing files/folders
This section describes how to erase a single unneeded file from a folder, erase all the files in the
current folder at once, or erase a selected folder.
Erasing files
1
2
4
5
Select the file you want to erase
Press the `OK button.
(☞ P.24).
3
When the file display screen
appears, press the ERASE button
while the voice recorder is in stop
mode.
Press the
+
button to select
[Start].
• The voice recorder returns to the
stopped mode if no operation is
performed for 8 seconds.
3
Press the
+
/
–
button to select [All
6
Press the `OK button.
in folder] or [One file].
• [Erasing!] appears in the display, and
the erasing process starts. [Erased]
appears when the process has
finished.
[All in folder]:
Erases all the files saved in the same
folder as the selected file.
[One file]:
Erases only the selected file.
EN
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Erasing files/folders
Erasing a folder
1
2
Select the folder you want to
NOTE
erase (☞ P.24).
• Files cannot be restored after being
erased, so please check carefully before
erasing a file.
• When there is a microSD in the voice
recorder, be sure to check whether
the recording media being erased is
[Internal memory] or [microSD card]
(☞ P.77).
In the folder display screen, press
the ERASE button while the voice
recorder is in stop mode.
3
• Locked files and read-only files cannot
be erased (☞ P.61).
• The voice recorder’s default [Recorder]
folders ([FolderA] to [FolderE], and
[FM Radio]* folder) and [Music] folder
cannot be erased.
• The voice recorder returns to the
stopped mode if no operation is
performed for 8 seconds.
* WS-823 model only
• [Music] folder subfolders other than
3
4
Press the
+
button to select
the [Music] can be erased.
[
Start].
• Files unrecognizable to the voice
recorder will not be erased, nor will
folders containing these files. The voice
recorder must be connected to a PC to
erase these files and folders.
• Before erasing a file or folder, charge or
replace the battery to ensure it will not
run out before the process has finished.
Erasing processes can take over 10
seconds to complete. To prevent the
risk of damage to data, never attempt
to perform any of the following
processes before an erasing process
has finished :
Press the `OK button.
• [Erasing!] appears in the display, and
the erasing process starts. [Erased]
appears when the process has
finished.
1Disconnecting the AC adapter
2Removing the battery
3Removing the microSD card (if the
recording media has been set to
[microSD card]).
EN
47
Download from Www.Somanuals.com. All Manuals Search And Download.
FM radio
(WS-823 model only)
Before using the FM radio function
Radio signal reception quality varies substantially depending on where you are using the radio.
Poor reception can often be improved by adjusting the antenna position or orientation, or
moving to a more accessible location for the signal such as a near window.
NOTE
NOTE
4
• The supplied earphones function as
an FM antenna. If the earphones are
not connected, the message [Insert
earphone] appears, and FM radio can
not be received.
• FM radio cannot be received when
you are beyond a radio station’s
broadcasting range or when the signal
is blocked by mountains or other
topographical obstructions.
• Even when within broadcasting range,
you may not be able to receive radio
broadcasts in locations prone to signal
reception difficulty (such as within
tunnels, underpasses, office buildings,
apartment buildings and building
shadows).
• Do not use a mobile phone, PC, TV
or other electrical appliance near the
voice recorder when using it to listen
to the radio. Such product may cause
noise.
To EAR
jack
• Using the voice recorder with a
connected AC adapter (such as model
A514) will generate noise. Always use
batteries for the FM radio function.
TIP
• You may not be able to receive FM
radio when indoors or in the shadow of
a building. Reception may be improved
by moving near a window when
indoors, or by moving out of building
shadows.
EN
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Presetting radio stations automatically
Presetting a local radio station [By scanning]
Follow the steps below to preset the frequency of an FM radio station you can receive in your
area.
1
2
3
7
Connect the earphones to the
Press the
+
/
–
button to select
voice recorder’s EAR jack.
[Set stations].
Press the F1 (HOME) button to
display the [Home] screen.
4
Press the
+/–, 9or 0
button to select [FM Radio].
8
9
Press the `OK button.
4
5
Press the `OK button.
Press the MENU/SCENE button.
Press the
+/
–
button to select [By
scanning].
6
Press the `OK button to move
the cursor to the desired setting
item.
10
Press the `OK button.
EN
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Presetting radio stations automatically
Presetting a local radio station [By scanning]
11
Press the
+/–
button to select
TIP
[
Start].
• Preset numbers are sorted
automatically by frequency.
• Up to 30 radio stations can be preset.
The message [Preset Full] appears if
you attempt to preset more than 30
stations.
4
12
Press the `OK button.
• When [Set by scanning completed]
appears, the operation is finished.
EN
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to FM radio
Listening to FM radio
Follow the steps below to listen to stereo FM radio on the voice recorder.
1
2
3
Set FM radio mode by
performing Steps 1 to 4 of the
procedure given in “Presetting
radio stations automatically
(☞ P.49).
Press the
+
/
–
button to adjust
the volume to the desired level.
”
Press the 9or 0button to
select a radio station.
4
• The volume can be adjusted to a
setting between [00] and [30]. The
higher the number, the louder the
volume.
FM radio settings
TIP
The FM radio function includes features for
automatically presetting radio stations, and
for setting the scan sensitivity used during
auto reception.
• By selecting the frequency mode
and manually adjusting the
frequency, you may sometimes be
able to receive a radio station that
was not detected by the automatic
preset operation (☞ P.52).
• You can add a received radio station
to the preset stations (☞ P.53).
• To stop listening to FM radio, press
the F1 (HOME) button to return to
the [Home] screen.
Used to search for local
radio stations and preset
received stations in a list.
[
Set stations]
(☞ P.49)
[
Scan Level
(☞ P.81)
]
Sets the scan sensitivity
during auto reception.
Used to select whether to
listen to FM radio through
the earphones or speaker.
[
Output]
• You can listen to the radio through
the voice recorder’s built-in
(☞ P.81)
speaker with the earphones still
connected (☞ P.81).
EN
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to FM radio
Selecting the reception mode
Different reception modes can be selected to match different reception conditions. If the radio
station you want to listen to has a signal too weak to be detected by the automatic preset
process, you can select manual reception to adjust the radio frequency manually.
1
2
Set FM radio mode by
performing Steps 1 to 4 of the
procedure given in “Presetting
radio stations automatically
(☞ P.49).
Preset mode
• Pressing the 9or 0button lets
you select preset radio stations (by
preset number).
”
4
a Preset number
Press the F2 button to select the
desired reception mode.
TIP
a
• When a radio station has been
preset (☞ P.49), the voice
recorder switches between preset
mode and frequency mode each
time you press the F2 button.
• You cannot select preset mode if
no radio stations have been preset.
3
Press the 9or 0button to
change the reception mode.
b
Frequency mode (auto reception/manual reception)
• Press the 9or 0button to adjust
the FM radio frequency being received
(manual reception).
• When the frequency of a non-preset
radio station is being received, pressing
the F2 button switches to the preset
station nearest in frequency to the
current frequency.
• Press and hold the 9or 0button
to scan to the next radio station found
(auto reception).
• Reducing the sensitivity used for
scanning can sometimes enable
reception of stations difficult to receive
due to interference or other problems
(☞ P.81).
b Frequency being received
EN
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding preset radio stations
Adding a radio station received manually as a preset station [Set manually]
Follow the steps below to add a radio station received in frequency mode as a preset radio
station.
1
Set FM radio mode by
performing Steps 1 to 4 of the
procedure given in “Presetting
radio stations automatically
(☞ P.49).
6
Press the
+
/
–
button to select
[Set stations].
”
4
2
3
Press the F2 button to set
frequency mode.
Press the 9or 0button to
select the radio station you want
to preset.
7
8
Press the `OK button.
Press the button to select
+
/–
[
Set manually].
4
Press the MENU/SCENE button.
9
Press the `OK button.
5
Press the `OK button to move
the cursor to the desired setting
item.
EN
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding preset radio stations
Adding a radio station received manually as a preset station [Set manually]
10 Press the
+
/
–
button to select
[
Save preset].
4
11 Press the `OK button.
• When the message [Preset (number)
saved] appears, the procedure is
finished.
TIP
• Up to 30 radio stations can be preset.
The message [Preset Full] appears if
you attempt to preset more than 30
stations.
• Preset numbers are sorted
automatically by frequency.
EN
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting preset radio stations
Deleting an unneeded preset radio station
1
5
Set FM radio mode by
performing Steps 1 to 4 of the
procedure given in “Presetting
radio stations automatically
(☞ P.49).
Press the
+
/
–
button to select
[Erase preset].
”
2
3
Press the F2 button to set preset
mode.
4
Press the 9or 0button to
select the preset number of the
radio station you want to delete.
6
Press the `OK button.
4
Press the ERASE button.
• When the message [Preset (number)
erased] appears, the procedure is
finished.
TIP
• Preset numbers are sorted
automatically by frequency.
EN
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording FM radio
Recording FM radio
Even when FM radio reception is clear, noise may enter after starting to record in certain
reception environments. To avoid such a problem, perform a test recording beforehand. Try to
record in a location with good radio reception.
3
Press the REC (s) button to start
NOTE
recording.
• Recording is disabled when [Output]
in the [FM Menu] menu is set to
a
[Speaker]. Set this item to [Earphone]
before starting recording (☞ P.81).
b
c
4
d
1
Set FM radio mode by
performing Steps 1 to 4 of the
procedure given in “Presetting
radio stations automatically
(☞ P.49).
a
Preset number being received
b Radio frequency being received
c Indicator of folder where file will
be saved and Recording format
indicator
”
2
Press the 9or 0button to
select the radio station you want
to record from.
d Elapsed recording time and Possible
recording time remaining
• The LED indicator light lights, and [K]
appears in the display.
4
Press the STOP (4) button when
you want to stop recording.
• The recorded file is saved
automatically in the [FM Radio]
subfolder in the [Recorder] folder.
EN
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording FM radio
Recording FM radio
TIP
• Files recorded from FM radio have “FM”
appended to the beginning of the file
name assigned at the time of recording
(☞ P.27).
FM130715_0007.MP3
Date: 130715 (July 15, 2013)
4
NOTE
• When recording FM radio, always
connect the earphones to the EAR jack.
EN
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
Setting menu items
Basic operation
Menu items are arranged by tabs, letting you quickly set desired items by selecting a tab and
then moving to the desired item within the tab. Follow the steps below to set a menu item.
1
3
During recording/playback or
Press the `OK button to move
the cursor to the desired setting
item.
while the voice recorder is in stop
mode, press the MENU/SCENE
button.
5
• You can also use the 9button to
perform this operation.
TIP
4
Press the
+/
–
button to select the
• Some menus contain items that
can be set during recording/
playback (☞ P.60).
desired setting item.
2
Press the
tab containing the item you want
to set.
+
/
–
button to select the
• Moving the cursor from one tab to
another switches the displayed menu
screen.
EN
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting menu items
Basic operation
5
8
Press the `OK button.
Press the STOP (4) button to exit
the menu screen.
• The setting of the selected item is
displayed.
• You can also use the 9button to
perform this operation.
• When the menu screen is displayed
during recording or playback, press
the MENU/SCENE button to return to
the previous screen without ending
recording/playback.
5
6
7
Press the
+
/–
button to change
the setting.
NOTE
• For menu settings done while the voice
recorder is in stop mode, the voice
recorder exits the menu and returns to
the stopped mode if no operation is
performed for 3 minutes. The selected
setting item is not changed in this case.
• For menu settings done during
recording/playback, the voice recorder
exits the menu if no operation is
Press the `OK button to finalize
the setting.
performed for 8 seconds.
• A message indicating the setting has
been entered appears.
• You can cancel the setting and return
to the previous screen by pressing
the 0button instead of the `OK
button.
EN
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting menu items
Basic operation
4
Menu items that can be set
during recording
• Rec Level
• Zoom Mic*1
• Low Cut Filter
• VCVA
• Backlight
• LED
4
Menu items that can be set
during Playback
5
• Property
• Noise Cancel*2
• Voice Balancer*2*3
• Voice Filter*2*4
• Play Mode
• Equalizer*5
• Skip Space
• Backlight
• LED
4
Menu items that can be set while
listening to the radio (WS-823
model only)
• Rec Mode*6
• Set stations*6
• Scan Level*6
• Backlight
• LED
• Output*6
*1 WS-823 model only
*2 Function active only in [Recorder] mode.
*3 WS-823 and WS-822 models only
*4 WS-821 model only
*5 Function active only in [Music] mode.
*6 Cannot be selected while recording from
the radio.
EN
60
Download from Www.Somanuals.com. All Manuals Search And Download.
File menu [File Menu]
Sorting files [Sort by]
Extracting the speaking portions of
files of spoken-word content [Voice
Detect]
You can change the playback order of the
files in a folder.
1
Press the
+
/
–
button to select
The [Voice Detect] function extracts the
speaking portions of a file of spoken-word
content recorded by the voice recorder.
See “Extracting speaking portions of files
of spoken-word content [Voice Detect]”
(☞ P.82) for more information.
[
File name], [Date ascending] or
Date descending].
[
[File name]:
Automatically sorts the files by file
name.
[Date ascending]:
Automatically sorts the files by date
(recording date/time) from oldest to
newest files.
5
WS-823 and WS-822 models
only
[Date descending]:
Automatically sorts the files by date
(recording date/time) from newest to
oldest files.
Preventing accidental file erasure
[File Lock]
2
Press the
+
/
–
button to select
[
Recorder] or [Music].
[Recorder]:
Sorts all the files in the [Recorder]
folder (including the files in the [FM
Radio]* folder).
The file lock feature lets you lock important
files to prevent them being accidentally
erased. Once locked, a file is not erased even
if the operation for erasing all the files in its
folder is performed (☞ P.46).
[Music]:
Sorts all the files in the [Music] folder.
* WS-823 model only
1
Select the file you want to lock
(☞ P.24).
NOTE
• When [File name] is selected, files
are listed in order of file name
based on the first 20 characters of
each name.
[Lock]:
File is locked.
[Unlock]:
File lock is canceled.
EN
61
Download from Www.Somanuals.com. All Manuals Search And Download.
File menu [File Menu]
Moving/copying files [Move/Copy]
Displaying file or folder
information [Property]
Files saved in the internal memory or on a
microSD card can be moved or copied within
memory.
See “Moving/copying files [Move/Copy]”
(☞ P.84) for the procedure.
You can display the information of a file or
folder from a menu screen.
File information
1
Press the
+
/
–
button to switch
WS-823 and WS-822 models
only
the screen.
• Information is displayed for the items
[Name], [Date], [Size], [Bit Rate]*1
[Artist]*2 and [Album]*2
,
.
5
*1 If you selected a linear PCM-format
file, the [Bit Rate] item displays the
sampling frequency and bit count.
*2 If the file has no tag information,
[UNKNOWN_ARTIST] and
Dividing files [File Divide]
Large files or files with long recording times
can be divided for easier management and
editing.
See “Dividing a file [File Divide]” (☞ P.87)
for the procedure.
[UNKNOWN_ALBUM] are displayed.
Folder information
1
Press the
+/
–
button to switch
the screen.
• Information is displayed for the items
[Name], [File] (the number of files) and
[Folder] (the number of folders).
• The [Folder] item is not displayed in
[Recorder] mode.
• Displayed numbers of files do not
include files in formats that are
unrecognizable to the voice recorder.
EN
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording menu [Rec Menu]
Adjusting the recording level
Selecting the recording sensitivity
[Rec Level]
WS-823 model only
You can change the recording level
(sensitivity) as needed for your recording
application.
1
Adjust the recording level by
pressing the 9or 0button
during recording or when
recording is paused.
[High]:
The highest recording sensitivity. Suited
to recording lectures, large conferences
and other applications with distant or
quiet sound sources.
[Middle]:
Suited to recording discussions and
small-group meetings.
5
[Low]:
The lowest recording sensitivity. Suited
to recording dictation.
[Manual]*:
Lets you set the recording sensitivity
manually, to any of 30 levels.
* WS-823 model only
• Increasing the [Rec Level] number
increases the recording level and
extends the level meter indicator
position.
NOTE
TIP
• Setting the voice recorder to [Manual]
disables the limiter function. If [OV] is
displayed, the recorded audio will be
distorted. Adjust the recording level so
that [OV] is not displayed.
• To record the speaker’s voice clearly,
set [Rec Level] to [Low], and place the
voice recorder’s built-in microphone
near the speaker’s mouth (5 to10 cm
away).
NOTE
• When [Rec Level] is set to [High],
[Middle] or [Low], the recording level is
adjusted automatically.
Excessively loud sound input may
generate noise regardless of whether
[Rec Level] is set to [High], [Middle]
or [Low].
EN
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording menu [Rec Menu]
Setting the recording mode
[Rec Mode]
Selecting microphone directivity
[Zoom Mic]
You can prioritize sound quality or recording
time. Select the recording mode that best
matches your recording application.
The voice recorder’s built-in stereo
microphone provides directivity ranging from
broad-coverage stereo recording to highly
directional recording.
[PCM 44.1 kHz]*1
[MP3 256 kbps]*1
[MP3 192 kbps]*2
WS-823 model only
[MP3 128 kbps]
[WMA 32 kbps mono]*3
[WMA 8 kbps mono]*3
*1 WS-823 and WS-822 models only
*2 WS-821 model only
*3 Mono recording
1
Press the
the built-in stereo microphone’s
directivity.
+
/
–
button to adjust
5
TIP
• Sound quality increases as the
recording rate value increases.
• Setting a higher recording rate
increases file size. Check that you have
enough remaining memory before
recording.
• To record conferences and
presentations clearly, it is
recommended to set [Rec Mode]
setting to [MP3 128kbps] or above.
• The + button increases directivity.
• The – button enables recordings with
broader-coverage stereo.
• Reducing directivity and broadening
the sound pickup range gives
recordings more of a stereo effect.
• The setting can be adjusted to
between [–3] and [+6].
NOTE
• When [Rec Mode] is set to stereo,
recording with a connected mono
microphone records on the left channel
only.
EN
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording menu [Rec Menu]
Selecting microphone directivity
[Zoom Mic]
Reducing noise during recording
[Low Cut Filter]
The voice recorder’s low cut filter function
lets you make recordings that reduce
humming sounds from air-conditioners or
low-frequency sounds from equipment such
as projectors.
Zoom mic function
High
directivity
[On]:
Turns the low cut filter ON.
[Off]:
Turns the low cut filter OFF.
Low
directivity
5
Narrow sound
pickup range
Broad sound
pickup range
Voice-activated recording function
[VCVA]
NOTE
• The [Zoom Mic] function has been set
so as to optimize its performance when
it is used with the voice recorder’s built-
in stereo microphone. Note that normal
recording may no longer be possible
when using a separately purchased
microphone or when recording from
another device using a connecting
cord.
The voice-activated recording function
(VCVA) automatically starts recording when
a sound louder than a preset voice activation
level is detected, and automatically pauses
recording when the sound volume level
falls. Use this function to automatically omit
unneeded quiet segments when recording
(such as long silences during conferences),
saving memory.
• Using the [Zoom Mic] function will
make the battery deplete more quickly.
[On]:
Turns VCVA ON. You can adjust the
voice activation level used for VCVA
(☞ P.66).
[Off]:
Turns VCVA OFF. Restores standard
recording.
EN
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording menu [Rec Menu]
TIP
Adjusting the voice activation level for
voice-activated recording
• Increasing the setting number
increases the VCVA activation
sensitivity, enabling quieter sounds to
activate the start of recording.
• Adjust the VCVA voice activation level
to suit the recording conditions (to
cope with high levels of surrounding
noise or the like).
1
Press the REC (s) button to start
recording.
• Recording pauses automatically
about 1 second after the input
sound becomes quieter than the set
activation sensitivity.
The blinking message [Standby]
appears in the display. The LED
indicator light becomes lit when
recording is activated and flashes
when recording is paused.
• To avoid recording mistake, it’s
recommended to perform a test
recording beforehand to adjust the
voice activation level.
WS-823 model only:
5
• To change the recording level
(☞ P.63) during VCVA recording in
[Manual], press the F1 button. The
voice recorder changes to recording
level adjustment mode. Press the
F1 button again to return to voice
activation level adjustment mode.
2
Press the 9or 0button to
adjust the voice activation level.
a
NOTE
• The following function is disabled
when using the [VCVA] function:
b
a Voice activation level (moves left/
•
[V-Sync. Rec] (☞ P.67)
right to match set level)
b Level meter (changes in proportion
to recording sound volume)
• The setting can be adjusted to
between [01] and [23].
EN
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording menu [Rec Menu]
Adjusting the voice sync level for voice sync
recording
Voice sync recording function
[V-Sync. Rec]
1
2
Press the REC (s) button to
The voice sync recording function
prepare for recording.
automatically starts recording when a sound
louder than a preset voice sync recording
level (detection level) is detected, and
automatically stops recording when the
sound volume level decreases. When copying
music from another device connected to the
voice recorder, use the voice sync recording
function to detect the silent intervals
between music tracks and save each track as
a separate file.
Press the 9or 0button to
adjust the voice sync level.
5
Voice sync level (moves
left/right to match set
level)
[1 sec.], [2 sec.], [3 sec.], [5 sec.]:
Set the detection time. The voice
recorder enters standby mode when
the input (recording level) is below the
preset level for at least the set detection
time.
• The voice sync level can be adjusted to
a setting between [01] and [23].
• Increasing the setting number increases
the activation sensitivity, enabling
quieter sounds to activate the start of
recording.
[Off]:
Recording is done normally.
TIP
WS-823 model only
• To change the recording level
(☞ P.63) during voice sync level
adjustment in [Manual], press the F1
button. The voice recorder changes to
recording level adjustment mode. Press
the F1 button again to return to voice
sync level adjustment mode.
EN
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording menu [Rec Menu]
3
Press the REC (s) button again.
• The blinking message [Standby]
appears in the display, and the LED
indicator light flashes.
• Recording starts automatically if the
input is louder than the voice sync
level.
TIP
• The voice recorder automatically ends
recording and returns to recording
standby mode when the input sound
has been below the voice sync level
for at least the set detection time.
Each time the voice recorder enters
standby mode, the current file is closed.
Recording continues in a new file the
next time sound is detected.
5
• Press the STOP (4) button to end a
voice sync recording session.
NOTE
• The following function is disabled
when using the [V-Sync. Rec] function:
•
[VCVA] (☞ P.65)
EN
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback menu [Play Menu]
Skipping non-voice portions during
playback [Voice Playback]
Alternating repeatedly between
normal and muted playback
[Shadowing]
The [Voice Playback] function lets you only
play the speaking portions of a recorded file
of spoken-word content.
The voice recorder’s shadowing playback
function plays a repeat segment set for the
ABC repeat playback function (☞ P.40)
first at normal volume (for listening practice
when learning a foreign language), and then
a second time at muted or low volume (for
speaking practice).
WS-823 and WS-822 models
only
NOTE
These two operations are repeated in
alternation. This function is handy for use in
language learning.
5
• The speaking portions of the file must
be extracted beforehand (☞ P.82).
[Silent]:
[On]:
Plays the repeat segment with the
volume muted (silent) after playing it
once at normal volume.
[Small volume]:
Plays the repeat segment at low volume
after playing it once at normal volume.
[Off]:
Automatically skips the non-voice
portions of the file and plays only the
speaking portions.
[Off]:
The voice playback function is disabled.
NOTE
Disables the shadowing playback
function.
• The [Voice Playback] function is only
enabled in [Recorder] mode.
NOTE
• Shadowing playback only works with
ABC repeat playback (☞ P.40).
EN
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback menu [Play Menu]
Reducing noise during playback
[Noise Cancel]
Adjusting low volume portions
during playback [Voice Balancer]
Use the [Noise Cancel] function to reduce
noise when a recorded voice is difficult to
discern.
The [Voice Balancer] function adjusts low-
volume portions of recorded audio files to
make them louder.
Use it to make quiet parts of conversations
or other recorded audio louder and clearer.
The function can be used on files saved in the
audio recording folders ([&] to [*]).
[High][Low]:
Reduces surrounding noise, producing
higher sound-quality playback.
[Off]:
The noise cancel function is disabled.
WS-823 and WS-822 models
only
5
NOTE
• [Noise Cancel] is only enabled in
[Recorder] mode.
• Using the [Noise Cancel] function will
make the battery deplete more quickly.
• The following function is disabled
when using the [Noise Cancel]
function:
[On]:
Adjusts low-volume portions of audio
files during playback, making them
louder.
[Off]:
The voice balancer function is disabled.
NOTE
•
Modified speed/tone* during
playback (☞ P.38)
• [Voice Balancer] is only enabled in
[Recorder] mode.
* WS-823 and WS-822 models only
• Using the [Voice Balancer] function
will make the battery deplete more
quickly.
• When the [Voice Balancer] function
and [Play Scene] function have both
been selected, the [Play Scene] setting
takes precedence. The [Play Scene]
settings cannot be changed (☞ P.74).
EN
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback menu [Play Menu]
Emphasizing voice more clearly
[Voice Filter]
Selecting playback modes
[Play Mode]
During normal playback or fast/slow
playback, the voice filter function cuts
low- and high-frequency range tone and
emphasizes voices, making them more clearly
audible.
Several playback modes are available for
different listening styles.
1
Press the
+
/
–
button to select
[
Recorder] or [Music].
When [Recorder] was selected
Press the button to select
WS-821 model only
2
+
/–
[
File] or [Folder].
5
[On]:
[File]:
Turns on the voice filter function.
[Off]:
Stops playback after the current file
has been played.
Turns the voice filter function OFF.
[Folder]:
NOTE
Plays all the files in the current folder
consecutively, stopping playback after
the last file in the folder is played.
• [Voice Filter] is only enabled in
[Recorder] mode.
• Using the [Voice Filter] function will
make the battery deplete more quickly.
• When the [Voice Filter] function and
[Play Scene] function have both been
selected, the [Play Scene] setting takes
precedence. The [Play Scene] settings
cannot be changed (☞ P.74).
When [Music] was selected
2
Press the
+
/
–
button to select
[
Playback range], [Repeat] or
Random].
[
[Playback range]:
Lets you specify a range of files for
playback.
[Repeat]:
Repeatedly plays the files in the set
range.
[Random]:
Plays the files in the set range at
random.
EN
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback menu [Play Menu]
3
Press the
setting.
+/–
button to select a
NOTE
• When [Playback range] is set to [File],
[End] blinks in the display for 2 seconds
after the last file in the folder has been
played, then playback stops at the start
position of the last file.
• When [Playback range] is set to
[Folder], [End] blinks in the display for
2 seconds after the last file in the folder
has been played, then playback stops
at the start position of the first file in
the folder.
When [Playback range] was selected:
[File], [Folder], [All]:
Specify the range of files for playback.
When [Repeat] or [Random] was
selected:
[On]:
The files in the specified playback
range are played repeatedly or at
random.
[Off]:
• When [Playback range] is set to [All],
after the last file in the current folder
has been played, the first file in the
next folder is being played. When
playback reaches the end of the last file
in the voice recorder, [End] blinks in the
display for 2 seconds, then playback
stops at the start position of the first file
in the voice recorder.
Cancels repeat playback and random
playback.
5
EN
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback menu [Play Menu]
Changing music sound quality
[Equalizer]
Setting a skip space
[Skip Space]
The voice recorder’s equalizer settings can
be changed to change music sound quality
as desired.
The [Skip Space] function lets you skip
a preset amount forward (forward skip)
or backward (reverse skip) in a file during
playback. It is handy for quickly moving the
playback position, or for repeated playback of
a short segment.
When [User] was selected
1
2
Press the 9button.
1
Press the
+
/
–
button to select
Press the 9or 0button to
select a frequency band.
[
Forward Skip] or [Reverse Skip].
5
[Forward Skip]:
• You can set different levels for the
[60 Hz], [250 Hz], [1 kHz], [4 kHz] and
[12 kHz] frequency bands.
Starts playback after moving the
playback position forward by the set
amount.
[Reverse Skip]:
3
Press the
level.
+
/
–
button to set a
Starts playback after moving the
playback position backward by the set
amount.
• Levels can be set to values between
[–6] and [+6], in 1 dB increments.
2
Press the
setting.
+/
–
button to select a
• Increasing a level setting emphasizes
the corresponding frequency band.
• To change another frequency band,
When [Forward Skip] was selected:
[File Skip], [10 sec. Skip], [30 sec. Skip],
[1 min. Skip], [5 min. Skip], [10 min.
Skip]
2
3
repeat Steps and
.
NOTE
• [Equalizer] is only enabled in [Music]
mode.
When [Reverse Skip] was selected:
[File Skip], [1 sec. Skip] to [3 sec. Skip],
[5 sec. Skip], [10 sec. Skip], [30 sec.
Skip], [1 min. Skip], [5 min. Skip]
EN
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback menu [Play Menu]
[Transcription]
NOTE
[
[
STOP (4)
9(CUE)
0(REV)
]
[
[
[
[
[
[
Auto Back (3 sec)
]
• Forward/reverse skip operations over a
skip space that contains an index mark/
temp mark or the starting position of a
file will stop at that mark or at the start
position.
*1
x3.5 Play Back
]
]
*2
x2.0 Play Back
Reviewing
10 sec. Skip
3 sec. Skip
]
[
[
[
[
]
]
9(SKIP)
]
]
0(SKIP)
]
]
*1
Voice Balancer
]
)
[
On]
*2
([Voice Filter
]
Forward/reverse skip playback
[Language study]:
Changes the operations assigned to the
voice recorder’s buttons to operations
tailored to language learning.
1
Press the `OK button to start
playback.
5
[Language study]
2
Press the 9or 0button
during playback.
[
STOP (4)
9(CUE)
0(REV)
]
[
[
[
[
[
[
Stop
x2.5 Play Back
x2.0 Play Back
Reviewing
10 sec. Skip
3 sec. Skip
]
*1
*2
]
]
• Playback starts after skipping forward
or backward by the set amount.
[
]
[
[
[
[
]
]
9(SKIP)
]
]
0(SKIP)
]
]
*1
Voice Balancer
]
)
[Off]
Setting a preset playback settings
template [Play Scene]
*2
([Voice Filter
]
*1 WS-823 and WS-822 models only
*2 WS-821 model only
The voice recorder has 2 preregistered
templates, [Transcription] and [Language
study], with optimum settings tailored to
such playback scenes. With one single step
you can select one of these templates to
enter several settings recommended for your
recording application.
TIP
• You can press the 9button to
display the selected template setting.
Press the 0button to return to the
[Play Scene] screen.
[Transcription]:
Is a handy setting when creating a
written record by transcribing an audio
file of spoken-word content such as
a conference or interview recording.
Changes the operations assigned to the
voice recorder’s buttons to operations
tailored to transcription.
EN
74
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD/Sound menu [LCD/Sound Menu]
Setting the backlight [Backlight]
Setting the LED indicator light [LED]
The display backlights are switched on for
a preset amount of time when a button
operation is performed.
You can set the LED indicator light to not
become lit.
[On]:
LED indicator light is switched on.
[Off]:
[5 sec.], [10 sec.], [30 sec.], [1 min.]:
Set the amount of time that the
backlight stays lit.
LED indicator light stays off.
[Off]:
Disables the backlight.
5
Adjusting the contrast [Contrast]
Turning beeping sound ON/OFF
[Beep]
You can adjust the contrast of the display to
12 different levels.
The voice recorder makes beeping sounds
when buttons are pressed, or to warn in case
of operation errors. You can select whether
the voice recorder makes these beeping
sounds.
•
The setting can be adjusted to between
[01] to [12].
[On]:
Enables beeping sounds.
[Off]:
Disables beeping sounds.
EN
75
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD/Sound menu [LCD/Sound Menu]
Changing the display language
[Language]
Selecting the speaker output
[Speaker]
You can select the language used in the voice
recorder’s displays.
You can set the built-in speaker to be ON or
OFF when the earphones are not connected.
When set to [Off], sound will not be output
from the speaker even if the earphones are
accidentally disconnected. Use this setting to
prevent possible embarrassment on public
transport.
•
[English], [Español], [Français].
TIP
• The language selections vary
depending on where the voice recorder
was purchased.
[On]:
The voice recorder’s playback sound is
output from the earphones when the
earphones are connected, or from the
built-in speaker when the earphones
are not connected.
5
[Off]:
The voice recorder’s playback sound is
not output from the built-in speaker
even if the earphones are disconnected.
NOTE
WS-823 model only
• The setting for this function only
applies to file playback. To set
how speaker output is handled
when listening to FM radio, see the
description of the [Output] item in the
[FM Menu] menu (☞ P.81).
EN
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Device menu [Device Menu]
Selecting the recording media
[Memory Select]
Setting the battery in use
[Battery]
When there is a microSD card in the voice
recorder, you can select whether to record on
the internal memory or on the microSD card
(☞ P.17).
Set the battery type to match the battery you
are using.
[Ni-MH] (
):
Select this setting when using an
Olympus Ni-MH rechargeable battery
(model BR404).
[Internal memory]:
Records on the internal memory on the
voice recorder.
[Alkaline] (
):
Select this setting when using an
alkaline dry cell battery.
[microSD card]:
Records on the microSD card.
5
Setting power save mode
[Power Save]
The voice recorder turns OFF automatically
when a preset amount of time has elapsed
with the voice recorder stopped after power
ON.
[5 min.], [10 min.], [30 min.], [1 hr.]:
Select the desired amount of time.
[Off]:
Disables power save mode. Note that
leaving the voice recorder ON will
quickly deplete the battery.
EN
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Device menu [Device Menu]
TIP
Setting the date/time
[Time & Date]
• When setting the hour or minute,
each time you press the F2 button the
display changes between the AM/PM
and 24-hour clock formats.
Example: 10:38 PM
10:38 PM
(default format)
Set the date and time beforehand to enable
easier management of recorded files.
If the current date and time are not correct,
set them using the procedure below.
22:38
1
2
Press the 9or 0button to
• When setting the year, month or date,
each time you press the F2 button
the display order used for the date
changes.
select the desired setting item.
Example: March 24, 2013
5
3M 24D 2013Y
(default format)
24D 3M 2013Y
Press the
+/
–
button to change
the number.
2013Y 3M 24D
NOTE
• Even if the voice recorder is not used
for a long period of time, when the
battery is used up, the date and time
must be re-entered.
• To change the setting of another item,
press the 9or 0button to move
the blinking cursor, then press the + or
– button to change the number.
3
Press the `OK button to finalize
the setting.
EN
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Device menu [Device Menu]
Setting the USB connection
[USB Settings]
Restoring the default settings
[Reset Settings]
The [PC] setting lets you connect the voice
recorder to a PC to transfer files. The [AC
Adapter] setting lets you connect the voice
recorder to a USB-connection AC adapter
(model A514; optional) to charge the
rechargeable battery. You can change the
USB class setting as required by different USB
applications.
The [Reset Settings] function restores all
the voice recorder’s functions to their initial
(factory default) settings. Time setting and file
number will remain the same.
1
Press the
+
button to select
[
Start].
See “Setting the USB connection [USB
Settings]” (☞ P.89) for the procedure.
Rec Menu:
Rec Level: Middle
Rec Mode: MP3 128 kbps
Zoom Mic*1: Off
Low Cut Filter: Off
VCVA: Off
5
V-Sync Rec: Off
Rec Scene: Off
Play Menu:
Voice Playback*2*3: Off
Shadowing: Off
Noise Cancel*3: Off
Voice Balancer*2*3: Off
Voice Filter*3 *4: Off
Play Mode:
Recorder:
Playback range / File
Music:
Playback range / Folder
Repeat / Off
Random / Off
Equalizer*5: Off
Skip Space:
Forward Skip: File Skip
Reverse Skip: File Skip
Play Scene: Off
EN
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Device menu [Device Menu]
Checking recording media
information [Memory Info.]
LCD/Sound Menu:
Backlight: 10 sec.
Contrast: Level 06
LED: On
Beep: On
Language: English
Speaker: On
You can display the capacity and remaining
memory space of the recording media from a
menu screen.
Device Menu:
NOTE
Memory Select: Internal memory
Power Save: 10 min.
Battery: Ni-MH*2
Alkaline*4
• Some recording media memory
capacity is used as a management
area, so the actual usable capacity
will always be slightly less than the
displayed capacity.
USB Settings:
USB Connection: PC
USB Class: Storage Class
5
FM Menu*1
:
Rec Mode: MP3 128 kbps
Scan level: High
Output: Earphone
Checking voice recorder
information [System Info.]
*1 WS-823 model only
*2 WS-823 and WS-822 models only
*3 Function active only in [Recorder]
mode.
You can display voice recorder information
from a menu screen.
The voice recorder’s [Model], [Version]
(system version) and [Serial No.]
information is displayed.
*4 WS-821 model only
*5 Function active only in [Music] mode.
•
Formatting a recording media
[Format]
Formatting a recording media erases all
existing files saved on it. Be sure to transfer all
important files to a PC before formatting.
See “Formatting recording media [Format]”
(☞ P.91) for the procedure.
EN
80
Download from Www.Somanuals.com. All Manuals Search And Download.
FM menu [FM Menu]
Selecting the FM radio output
[Output]
WS-823 model only
You can select whether the sound of the FM
radio is output from the earphones or built-in
speaker. This setting cannot be changed
while recording from the radio.
Selecting the recording sound
quality [Rec Mode]
This setting cannot be changed while
recording from FM radio.
[Earphone]: Always outputs the radio
sound from the earphones. The
radio sound is not output from the
built-in speaker if the earphones are
disconnected.
[MP3 256 kbps]
[MP3 128 kbps]
5
[Speaker]: Always outputs the radio
sound from the built-in speaker. The
radio sound is not output from the
earphones even if they are connected.
Presetting a radio station
[Set stations]
NOTE
You can preset radio stations to make them
• The setting for this function only
applies to the radio sound. To set how
speaker output is handled for file
playback, see the description of the
[Speaker] item in the [LCD/Sound
Menu] (☞ P.76).
easier to select (☞ P.49, P.53).
Setting scanning sensitivity
[Scan Level]
You can select the scan sensitivity used
during auto reception. This setting cannot be
changed while recording from the radio.
[High]:
Scans for radio stations with high
sensitivity. Use this setting under
normal circumstances.
[Low]:
Scans for radio stations with low
sensitivity. Try using this setting when
there are problems such as interference
between radio stations.
EN
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Extracting the speaking portions of files of spoken-word content [Voice Detect]
Extracting the speaking portions of files of spoken-word content
[Voice Detect]
The [Voice Detect] function extracts the speaking portions of a file of spoken-word content
recorded by the voice recorder.
6
Press the `OK button.
WS-823 and WS-822 models
only
NOTE
• The [Voice Detect] function can only
be used in [Recorder] mode.
5
• The progress of the operation is shown
as a percentage in the display.
• [Voice Detection completed] appears
when the process has finished.
1
Select the folder containing the
desired file (☞ P.24).
TIP
2
3
Press the MENU/SCENE button
while the voice recorder is in stop
mode.
• When the voice detection process
has finished, the [Voice Playback]
item in the [Play Menu] is set to [On]
(☞ P.69).
Press the `OK button to move
the cursor into the list of setting
items.
4
5
Press the `OK button.
Press the
+/–
button to select the
desired file in which you want to
detect voice.
EN
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Extracting the speaking portions of files of spoken-word content [Voice Detect]
Extracting the speaking portions of files of spoken-word content
[Voice Detect]
NOTE
• The message [No file] appears if you
select a folder that doesn’t contain
a saved file. You must select a folder
containing a file before you can
perform the process.
• The voice recorder may not be able to
properly extract non-silent portions
from files of non-spoken word
content such as recorded musical
performances.
5
• The voice recorder may not be able
to properly extract speaking portions
when they were low in volume when
recorded (level meter readout of -12 dB
or less), or due to surrounding noise.
• The time needed for the extraction
process will increase in proportion to
the size of the recorded file. Before
starting extraction, it’s recommended
to charge or replace the battery to
ensure it will not run out before the
process has finished.
EN
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Moving/copying files [Move/Copy]
Moving/copying files [Move/Copy]
Files saved in the internal memory or on a
microSD card can be moved or copied within
memory.
6
Press the
desired file movement/copying
method.
+
/
–
button to select the
WS-823 and WS-822 models
only
1
Before performing the move/
copy operation, first select the
folder containing the file you
want to move or copy (☞ P.24).
[Move to memory]:
5
Moves one or more files saved in the
internal memory or inserted microSD
card to a different folder in the internal
memory.
2
3
Press the MENU/SCENE button
while the voice recorder is in stop
mode.
[Copy to memory]:
Copies one or more files saved in the
internal memory or inserted microSD
card to a different folder in the internal
memory.
Press the `OK button to move
the cursor into the list of setting
items.
[Move to microSD]:
Moves one or more files saved in the
internal memory or inserted microSD
card to a different folder in the
microSD card.
4
5
Press the
+
/
–
button to select
[
Move/Copy].
[Copy to microSD]:
Press the `OK button.
Copies one or more files saved in the
internal memory or inserted microSD
card to a different folder in the
microSD card.
7
Press the `OK button.
EN
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Moving/copying files [Move/Copy]
Moving/copying files [Move/Copy]
8
Press the
+
/
–
button to select the
When [One file] was selected
number of files to move or copy.
1
Press the +/– button to select the
file to move or copy, then press the
`OK button.
[One file]: Selects only the specified file
[Selected files]: Lets you select multiple
files.
[All files]: Selects all the files in the
folder.
5
When [Selected files] was selected
1
Press the +/– button to select a file
to move or copy, then press the
`OK button.
9
Press the `OK button to continue
to the next setting.
TIP
• You can deselect a previously
selected file by selecting it and
pressing the `OK button again.
2
Repeat Step 1 to select all the files
you want to move or copy, then
press the F2 button.
EN
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Moving/copying files [Move/Copy]
Moving/copying files [Move/Copy]
TIP
When [All files] was selected
• Locked files (☞ P.61) remain locked
after being moved or copied.
All the files in the current folder are
selected automatically, and the display
switches to the [Destination] screen.
10
Press the
button to select the folder to
move or copy the files to.
+/–, 9or 0
NOTE
• Files cannot be copied if there is
insufficient remaining memory.
• Files cannot be moved or copied if
there are over 200 files.
5
• To prevent the risk of data damage,
never remove the battery while moving
or copying a file.
• Files cannot be moved or copied within
the same folder.
11
Press the F2 button.
• When a file moving or copying process
is canceled before completion, the files
that completed the process will have
been moved or copied, and process is
canceled for the other files.
• Files with DRM cannot be moved or
copied.
• Files cannot be moved or copied
directly within the [Recorder] folder.
Instead, select one of the subfolders
within the [Recorder] folder: Folders &
to *, or the [FM Radio]* folder.
• The progress of the operation is shown
as a percentage in the display.
• [File move completed] or [File copy
completed] appears when the process
has finished.
* WS-823 model only
EN
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Dividing files [File Divide]
Dividing a file [File Divide]
Large files or files with long recording times
can be divided for easier management and
editing.
6
Press the
+
button to select
[
Start].
NOTE
Only MP3-format and PCM-format* files
recorded on the voice recorder can be
divided.
* WS-823 and WS-822 models only
7
Press the `OK button.
5
1
Play the file to divide, and stop
playback at the desired division
point.
• Press and hold the 9or 0
button to fast-forward/rewind.
• Writing an index mark/temp mark at
the division point beforehand is handy.
• [Dividing!] appears in the display, and
the file dividing process starts.
[File divide completed] appears when
the process has finished.
2
3
Press the MENU/SCENE button
while the voice recorder is in stop
mode.
8
Press the STOP (4) button to exit
the menu screen.
Press the `OK button to move
the cursor into the list of setting
items.
4
5
Press the
+
/
–
button to select
[
File Divide].
Press the `OK button.
EN
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Dividing files [File Divide]
Dividing a file [File Divide]
TIP
• After dividing a file, the first half of the
file is given the name “File name_1”
and the second half “File name_2”.
NOTE
• [File Divide] can be performed only
when the file list is displayed.
• Files cannot be divided if there are 200
files in the folder.
• Locked files (☞ P.61) cannot be
divided.
5
• It may not be possible to divide some
MP3 or PCM files with extremely short
recording times.
• To prevent the risk of data damage,
never remove the battery while
dividing a file.
EN
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the USB connection [USB Settings]
Setting the USB connection [USB Settings]
The [PC] setting lets you connect the voice recorder to a PC to transfer files. The [AC Adapter]
setting lets you connect the voice recorder to a USB-connection AC adapter (model A514;
optional) to charge the rechargeable battery. You can change the USB class setting as required
by different USB applications.
1
6
While the voice recorder is in stop
Press the
+
/
–
button to select
mode, press and hold the MENU
/
[USB Connection] or [USB Class].
SCENE button.
2
3
Press the
+
/
–
button to select the
[
Device Menu] tab.
5
Press the `OK button to move
the cursor into the list of setting
items.
[USB Connection]:
Used to set connection to a PC.
[USB Class]:
4
5
Press the
+/
–
button to select
Used to set the USB class.
[USB Settings].
7
Press the `OK button.
When [USB Connection] was selected
☞ Go to Step \
Press the `OK button.
When [USB Class] was selected
☞ Go to Step Å
TIP
• If the voice recorder is not
recognized by the PC as an
external memory device, select
[Storage Class] for [USB Class].
• If [AC Adapter] is selected for
[USB Connection], the voice
recorder will not be recognized if
connected to a PC.
EN
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the USB connection [USB Settings]
Setting the USB connection [USB Settings]
When [USB Connection] was selected
When [USB Class] was selected
8
10
Press the
setting.
+/–
button to select a
Press the
setting.
+/
–
button to select a
5
[PC]:
[Storage Class]:
Select to connect the voice recorder
to a PC. The voice recorder will be
connected as a storage or composite
device.
Select to have the voice recorder
recognized as an external memory
device by a connected PC.
[Composite]:
[AC Adapter]:
Select to have the voice recorder
recognized as an external memory
device by a connected PC, and to use
the voice recorder as a USB speaker/
microphone.
Select to charge the rechargeable
battery from a PC, or to connect
the voice recorder to an AC adapter
(model A514; optional).
[Optional]:
11
12
Press the `OK button, and go to
Select to confirm the connection
method whenever making a USB
connection.
Step Î.
Press the STOP (4) button to exit
the menu screen.
9
Press the `OK button, and go to
Step Î.
EN
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Formatting recording media [Format]
Formatting a recording media [Format]
Formatting a recording media erases all existing files saved on it. Be sure to transfer all
important files to a PC before formatting.
1
9
While the voice recorder is in stop
Press the `OK button.
mode, press and hold the MENU
/
SCENE button.
2
3
Press the
+
/
–
button to select the
[
Device Menu] tab.
Press the `OK button to move
the cursor into the list of setting
items.
5
10
11
Press the
+
button to select
[
Start] again.
4
Press the
+/
–
button to select
Press the `OK button.
[Format].
5
6
Press the `OK button.
Press the
+/–
button to select the
recording media to be formatted.
7
8
Press the `OK button.
• [Formatting!] appears, and formatting
starts.
• [Format done] appears when the
process has finished.
Press the
+
button to select
[
Start].
TIP
• To reset all the voice recorder’s settings
to their default values, use the [Reset
Settings] operation (☞ P.79).
EN
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Formatting recording media [Format]
Formatting a recording media [Format]
NOTE
• Never format the voice recorder from
a PC.
• Formatting erases all the existing data,
including locked files and read-only
files.
• If there is a microSD card in the voice
recorder, make sure [Internal memory]
or [microSD card] has been correctly
selected as the recording media to
erase (☞ P.77).
• Before formatting, charge or replace
the battery to ensure it will not run
out before the process has finished.
The formatting process can sometimes
take over 10 seconds to complete. To
prevent the risk of damage to data,
never attempt to perform any of the
following processes before a formatting
process has finished:
5
1Disconnecting the USB-connection
AC adapter
2Removing the battery
3Removing the microSD card (if the
recording media has been set to
[microSD card])
• Even when formatting or erasing
(☞ P.46) is performed, only the
file management information of the
internal memory and/or microSD card
is updated and the recorded data is not
completely erased.
When disposing of a microSD card,
be sure to destroy the card, format
the card and record silence until the
recording time runs out, or perform a
similar operation in order to prevent
the leakage of personal information.
EN
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Use with a PC
Connecting the voice recorder to a PC lets you:
•
Play WMA-, MP3- and WAV*-format
language-learning content and music
files loaded on a PC using Windows Media
Player or iTunes.
* WS-823 and WS-822 models only
As well as a voice recorder and music
player, you can use this device as a PC’s
external memory device to save or read
data from the PC (☞ P.98).
•
6
PC operating environment
Windows
Macintosh
Operating system
Microsoft Windows XP/Vista/7/8
standard installation
Operating system
Mac OS X 10.5 to 10.8
standard installation
PC
PC
Windows PC with at least one available USB
port
Apple Macintosh series PC with at least one
available USB port
NOTE
• The requirements shown are the operating environments needed for using a USB
connection to save files recorded by the voice recorder on a PC.
• Even when the requirements for the operating environment are satisfied, updated
versions, multiboot environments, self-modified PCs and other compatible machines will
not be covered under the operational warranty.
EN
93
Download from Www.Somanuals.com. All Manuals Search And Download.
PC operating environment
PC connection precautions
• When uploading or downloading a file to or from the voice recorder, data transfer will
continue as long as the voice recorder’s LED indicator light is flashing, even if the PC
data communication screen disappears. Never disconnect the USB connector before
data communication has finished. Always use the procedure on ☞ P.96 to disconnect
the USB connector. Data may not be transferred correctly if you disconnect the
connector before the drive has stopped.
• Do not format (initialize) the voice recorder’s drive from a PC. Formatting done from a
PC will not be done correctly. Use the voice recorder’s [Format] menu for formatting
(☞ P.91).
• Voice recorder folders or files that are moved or renamed in a Windows or Macintosh file
management screen may be reordered or become unrecognizable.
• Note that it will still be possible to read and write data on the voice recorder after
setting the attribute of the voice recorder’s drive to ’Read only’on a PC.
• To prevent nearby electronic devices being affected by noise, disconnect the external
microphone and earphones when connecting the voice recorder to a PC.
6
EN
94
Download from Www.Somanuals.com. All Manuals Search And Download.
PC connection/disconnection
Connecting the voice recorder to a PC
1
2
Start the PC.
TIP
• Windows: The voice recorder is
recognized and displayed in the [My
Computer] folder with the model
name as the drive name. If there is a
microSD card in the voice recorder, it
can be used as the [Removable Disk ].
• Macintosh: The voice recorder is
recognized and displayed on the
desktop with the model name as the
drive name. If there is a microSD card
in the voice recorder, [Untitled] is
displayed.
Slide the USB connector slide
lever in the direction of the
arrow.
• For information on the PC’s USB port,
6
• The USB connector extends out. The
USB connector cover is stored inside
the voice recorder.
see the PC’s user manual.
• Use the USB extension cable provided if
needed (only for WS-823 model).
3
After making sure the voice
recorder is in stop mode, connect
its USB connector to a USB port
on the PC.
NOTE
• The voice recorder must not be in
HOLD mode.
• Insert the USB connector securely all
the way. Operation will not be normal if
the connection is not made properly.
• Connecting the voice recorder through
a USB hub may result in unstable
operation. Do not use a USB hub if
operation is unstable.
• Use only a compatible Olympus USB
extension cable. Operation is not
guaranteed if another manufacturer’s
cable is used. Only use the Olympus
USB extension cable with the voice
recorder and never use it with another
manufacture’s products.
• [Remote (Storage)] appears in the
voice recorder’s display when the USB
connector is connected.
• The voice recorder will not connect to
the PC if [AC Adapter] was selected for
the voice recorder’s [USB Connection]
setting. Select [PC] for the [USB
Connection] setting (☞ P.89).
EN
95
Download from Www.Somanuals.com. All Manuals Search And Download.
PC connection/disconnection
Disconnecting the voice recorder from a PC
Windows
Macintosh
1
1
On the task bar at the bottom-
Drag-and-drop the removable
disk icon for the voice recorder
shown on the desktop to the
trash can icon.
right of the screen, click [
select [Safely remove USB Mass
Storage Device].
] and
• The letter used to identify the drive
will vary according to your PC.
• When the window indicating it is safe
to remove hardware appears, close the
window.
6
2
Check that the voice recorder’s
LED indicator light is off before
disconnecting the voice recorder
from the PC.
2
Check that the voice recorder’s
LED indicator light is off before
disconnecting the voice recorder
from the PC.
NOTE
• To prevent the risk of data damage, never disconnect the voice recorder from the USB
port while the LED indicator light is flashing.
EN
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading a file to a PC
The voice recorder’s five audio recording folders are displayed on the PC as [FOLDER_A],
[FOLDER_B], [FOLDER_C], [FOLDER_D] and [FOLDER_E]. Recorded audio files are displayed
within these folders (for WS-823 model only, recordings from FM radio are saved in a folder
labeled [FLD_FM]). You can copy voice recorder files to any folder on the PC.
4
Voice recorder drive name and folder names on the PC
Internal memory
microSD card
Drive name
Folder names
FOLDER_A
Drive name
WS-823*1
Folder names
FOLDER_A
RECORDER
MUSIC
RECORDER
MUSIC
Removable
disk
FOLDER_B
FOLDER_C
FOLDER_D
FOLDER_E
FLD_FM*2
FOLDER_B
FOLDER_C
FOLDER_D
FOLDER_E
FLD_FM*2
Windows
Untitled
Macintosh
6
*1 Recognized/displayed by voice recorder drive name
*2 WS-823 model only
NOTE
• To prevent the risk of data damage, never disconnect the voice recorder from the USB
port while the LED indicator light is flashing.
• WMA-format files cannot be played in the standard Macintosh operating system.
EN
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Usage as external memory of the PC
Connecting the voice recorder to a PC lets you transfer voice recorder data to save in the PC,
and vice-versa.
Windows
Macintosh
1
2
1
Connect the voice recorder to the
Connect the voice recorder to the
PC (☞ P.95).
PC (☞ P.95).
• When the voice recorder is connected
to the Macintosh operating system,
it is recognized and displayed on the
desktop with the model name as the
drive name.
Open Windows Explorer.
• When you open [My Computer],
the voice recorder is recognized and
displayed with the model name as the
drive name.
2
Double-click the removable disk
icon labeled with your voice
recorder’s model name.
3
Click on the folder labeled with
your voice recorder’s model
name.
6
3
4
Copy the desired data to the PC.
4
5
Copy the desired data to the PC.
Disconnect the voice recorder
from the PC (☞ P.96).
Disconnect the voice recorder
from the PC (☞ P.96).
NOTE
• During data communication, [Busy] appears in the voice recorder’s display and the LED
indicator light flashes. To prevent the risk of data damage, never disconnect the voice
recorder from the USB port while the LED indicator light is flashing.
EN
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Other information
Alarm message list
Message
Meaning
Action required
The remaining battery power
is low.
Replace or charge the battery
(☞ P.9, P.11).
Battery low
An attempt was made to erase a
locked file.
You must unlock the file before you
can erase it (☞ P.61).
File locked
Before recording, select [Recorder]
mode and one of the folders from
[Folder A] to [Folder E] (☞ P.21,
P.24).
An attempt was made to record
when not in [Recorder] mode.
Cannot record in this folder
WS-823 model only
Before recording, select one of the
folders from [Folder A] to [Folder E]
(☞ P.23, P.24).
An attempt was made to record in
the [FM Radio] folder.
The maximum number of index
marks (99) have been written in
the file.
Erase unneeded index marks
(☞ P.43).
7
No more can be set
Folder full
The maximum number of temp
marks (99) have been written in
the file.
Erase unneeded temp marks
(☞ P.43).
The maximum number of files
(200) have been saved in the
folder.
Erase unneeded files (☞ P.46).
An internal memory error
occurred.
Contact the Olympus Customer
Support Center (☞ back cover).
Memory error
Card error
The microSD card was not
recognized correctly.
Remove and reinsert the microSD
card (☞ P.17, P.18).
Illegally copied file
Memory full
The music file was copied illegally. Erase the music file (☞ P.46).
There is no remaining memory.
Erase unneeded files (☞ P.46).
EN
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Alarm message list
Message
Meaning
Action required
Select another folder (☞ P.23,
P.24).
No file
There are no files in the folder.
A formatting problem occurred.
Format the memory again
(☞ P.91).
Format error
Can’t create the system file.
Connect to PC and erase
unnecessary file
The voice recorder is unable to
create a management file due to
low remaining memory.
Connect the voice recorder to a PC
and erase unneeded files.
Select a file that can be played by
the voice recorder (☞ P.38).
Cannot play this file
Select a file
The file’s format is not supported.
No file has been selected.
You must select a file before you can
perform the operation (☞ P.23,
P.24).
Same folder can’t be moved
(copied)
An attempt was made to move
(copy) a file to the same folder.
Select another folder.
Select another file.
A file with the same name as a file
being moved (copied) exists in
the destination folder.
Some files can’t be moved
(copied)
7
An attempt was made to divide
a file that is not an MP3- or WAV-
format file recorded by the voice
recorder.
This file can’t be divided.
Insert earphone
Select another file.
WS-823 model only
Earphones that function as an
antenna for listening to FM radio
are not inserted.
Select FM radio mode after inserting
the earphone.
EN
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Possible cause
Solution
Check that the positive and negative
terminals of the battery are placed
correctly (☞ P.9).
The battery is not inserted
properly.
The display is blank.
The remaining battery power
is low.
Replace or charge the battery (☞ P.9,
P.11).
The power is OFF.
Turn the power ON (☞ P.9).
The remaining battery power
is low.
Replace or charge the battery (☞ P.9,
P.11).
Unable to operate the
voice recorder
The power is OFF.
Turn the power ON (☞ P.9).
The voice recorder is in HOLD
mode.
Release HOLD mode (☞ P.19).
There is no remaining memory.
Erase unneeded files (☞ P.46).
The maximum number of
recordable files has been reached.
Select another folder (☞ P.23, P.24).
Unable to record
7
WS-823 model only
[Speaker] has been selected for
[Output] in the [FM Menu].
Select [Earphone] for [Output] (☞ P.81).
The earphones are connected to
the EAR jack.
To output the playback through the built-
in speaker, disconnect the earphones.
To output the playback through the
built-in speaker, select [On] for [Speaker]
(☞ P.76).
[Off] has been selected for
[Speaker].
Playback is inaudible.
The volume is set to [00].
Adjust the volume (☞ P.34).
A low recording level has been
set.
Redo recording after setting the recording
level to [High] or [Middle] (☞ P.63).
The output level of the connected Adjust the output level of the external
The recording is too
quiet.
external device may be too low.
device.
WS-823 model only
The recording level hasn’t been
adjusted.
Redo recording after adjusting the
recording level (☞ P.63).
EN
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Possible cause
Solution
WS-823 model only
The recording level hasn’t been
adjusted.
Redo recording after adjusting the
recording level (☞ P.63).
Audio file sound is
distorted.
The voice recorder’s recording
level, or the output level of the
connected external device may
be too high.
If the problem continues after adjusting
the voice recorder’s recording level
(☞ P.63), adjust the output level of the
external device.
The connected external
microphone is a mono
microphone.
Sound recorded by a connected external
mono microphone is recorded on the left
channel only.
[Rec Mode] is set to a mono
recording format.
Set [Rec Mode] to a stereo recording
format (☞ P.64).
An audio file is not
recorded in stereo.
WS-823 model only
A positive (+) value has been
selected for [ Zoom Mic].
Select [Off] for [Zoom Mic] (☞ P.64).
The file was recorded in a
different folder.
Missing audio file
Select another folder (☞ P.23, P.24).
7
Objects brushed against the voice
recorder while recording.
The voice recorder was placed
near a mobile phone or
Noise during playback
Redo the operation with the voice recorder
fluorescent light during recording in a different location.
or playback.
WS-823 and WS-822 models only
The [Voice Detect ] process has
Use the [Voice Detect] function to extract
the speaking portions (☞ P.82).
Non-voice portions
are not skipped during
playback.
not been performed.
[Off] has been selected for [Voice Select [On] for [Voice Playback]
Playback].
(☞ P.69).
You must unlock the file before you can
erase it (☞ P.61).
The file is locked.
Unable to erase a file
Unlock the file, or undo the read-only
setting on a PC.
The file is a read-only file.
The folder contains a file that the Connect the voice recorder to a PC to erase
voice recorder cannot recognize. the folder (☞ P.95).
Unable to erase a folder
EN
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Possible cause
Solution
Connecting a speaker with a built-in
amplifier may cause feedback during
recording. Using the earphones to monitor
recording is recommended.
Noise when monitoring
a recording
Feedback is being caused.
Adjust the recording setup such as by
moving the earphones and microphone
farther apart, or ensuring the microphone
is not facing the earphones.
The maximum number of marks
(99) has been reached.
Erase unneeded marks (☞ P.43).
Unable to write index
marks/temp marks
The file is locked.
Unlock the file (☞ P.61).
Unlock the file, or undo the read-only
setting on a PC.
The file is a read-only file.
WS-823 model only
The earphones provided also function as
an antenna. Connect the earphones when
listening to the radio.
The earphones are not connected
to the EAR jack.
Unable to listen to FM
radio
To output the sound through the built-in
speaker, select [Speaker] for [Output]
(☞ P.81).
7
[Earphone] has been selected for
[Output].
WS-823 and WS-822 models only
To use the rechargeable battery provided,
select [Ni-MH] for [Battery]. Do not use
the rechargeable battery at higher/lower
temperatures than the recommended
range (☞ P.10, P.15, P.77).
[Alkaline] has been selected for
[Battery].
Unable to charge the
battery
Press the `OK button as directed in
The `OK button was not pressed. the confirmation screen shown when
connecting the USB connector.
[Composite] has been selected
for [USB Class].
Select [Storage Class] for [USB Class]
(☞ P.89).
The PC is unable to
recognize the voice
recorder.
[AC Adapter] has been selected
for [USB Connection].
Select [PC] for [USB Connection]
(☞ P.89).
[Transcription] or [Language
study] has been selected for
[Play Scene].
Button operations are
abnormal.
Select [Off] for [Play Scene] (☞ P.45,
P.74).
EN
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Recorder care
sExterior
•
Wipe gently with a soft cloth. If the recorder is very dirty, soak the cloth in mild soapy water
and wring well. Wipe the recorder with the damp cloth and then wipe it with a dry cloth.
sMonitor
•
Wipe gently with a soft cloth.
NOTE
• Do not use benzene, alcohol or other strong solvents, or chemical cleaning cloths.
7
EN
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories (optional)
Accessories for Olympus voice recorders can be purchased directly from the Online Shop on the
Olympus website.
Availability of accessories differs depending on the country.
ME51SW stereo microphone
ME15 mono tie clip microphone
(omnidirectional)
Has a large-diameter built-in microphone
for sensitive stereo recording.
A small, unobtrusive microphone that
comes with a tie-clip.
ME30W two-channel microphone
(omnidirectional)
TP8 telephone pickup microphone
An omnidirectional microphone pair
with a low-noise design ideal for
recording in lecture halls or other large
venues. The left and right microphones
can be placed up to about 5 meters
apart.
An earphone microphone that can
be worn in the ear during phone
calls. Clearly captures voices and
conversations during phone calls.
BR404 nickel-metal hydride AAA
rechargeable battery
ME31 compact gun microphone
(unidirectional)
A high-efficiency, long-lasting
rechargeable battery.
A directional gun microphone handy
for outdoor recording of wild birds
singing and other highly directional
applications.
The metal body provides a highly rigid
body.
A514 USB-connection AC adapter
A USB-connected AC adapter that
provides 5-volt DC output. (100-240 VAC,
50/60 Hz)
7
KA333 connecting cord
A resistive connection cord with stereo
mini-plugs (3.5 mm diameter) on both
ends. Used to connect the earphone jack
output to the line input when recording.
Comes with plug adapters (PA331/
PA231) that adapt to mono mini plugs
(3.5 mm diameter) or mono mini mini
plugs (2.5 mm diameter).
ME34 compact zoom microphone
(unidirectional)
Comes with an integrated tripod ideal
for table placement when recording
events from a distance, such as
conferences or lectures.
ME33 boundary microphone
A microphone for recording conferences
that enables connection of up to three
left- and three right-channel units.
Cascade connection enables the left/
right channel connections to be
extended up to about 12 meters, to
capture sound from a broad range.
KP19 USB connection cable
ME52W mono microphone
(unidirectional)
Designed to record sound from a
distance while minimizing the impact of
surrounding noise.
EN
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright and trademark information
•
The information in this document is subject to change in future without prior notice. Contact
Olympus Customer Support Center for the latest product names, model numbers and other
information.
•
Voice recorder displays and product illustrations shown in this manual may differ from
the actual product. While every precaution has been taken to ensure the accuracy of
the information in this manual, errors may occasionally arise. Any questions or concerns
regarding doubtful information, or possible errors or omissions should be directed to the
Olympus Customer Support Center.
•
•
Olympus Corporation and Olympus Imaging Corp. are the copyright holders of this manual.
Copyright law prohibits unauthorized reproduction of this manual, or unauthorized
distribution of reproductions thereof.
Note that Olympus will assume no liability in the event of damages, lost earnings, or any
claims from third parties resulting from improper use of the product.
Trademarks and registered trademarks
•
IBM and PC/AT are trademarks or registered trademarks of International Business Machines
Corporation.
•
•
•
•
•
•
Microsoft, Windows and Windows Media are registered trademarks of Microsoft Corporation.
microSD and microSDHC are trademarks of the SD Card Association.
Macintosh and iTunes are trademarks of Apple Inc.
The product uses MP3 audio coding technology licensed from Fraunhofer IIS and Thomson.
The product uses noise-canceling technology licensed from NEC Corporation.
The product uses voice activity detection technology licensed from NTT Electronics
Corporation.
7
•
The product uses directivity control technology licensed from Kyoei Engineering
Corporation.
All other brand or product names in this manual are the trademarks or registered trademarks of
their respective owners.
EN
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety precautions
Before using the voice recorder, read
this manual to ensure correct and safe
operation. After reading this manual, be
sure to keep it on hand for ready reference
whenever needed.
Voice recorder safety precautions
fWARNING
sDo not use the voice recorder in
an atmosphere that might contain
flammable or explosive gases.
It may cause fire or explosion.
sDo not attempt to disassemble,
repair or modify the voice recorder.
It may cause electric shock or injury.
Important safety precautions
•
Important safety precautions in this
manual are accompanied by the symbol
and labels below. Always follow these
precautions to prevent harming yourself
or others, or causing damage to property.
The meaning of each precaution type is
given below.
sDo not operate the voice recorder
while operating a vehicle (such as a
bicycle, motorcycle or car).
•
It may cause traffic accidents.
sDo not leave the voice recorder in
a location accessible to an infant
or child.
Pay attention when using the voice recorder
near an infant or child, taking care not to
leave it unattended. Infants and children are
unable to understand voice recorder safety
precautions, and are at risk of accidents
such as:
fDANGER
A precaution about an imminent
danger that is expected to result in
death or serious injury if equipment is
handed incorrectly.
7
fWARNING
A precaution about a situation that
is expected to potentially result in
death or serious injury if equipment is
handled incorrectly.
–
Strangulation caused by accidental
entanglement of the earphone cord
around the neck.
fCAUTION
–
Operation errors resulting in injury or
electric shock.
A precaution about a situation that
is expected to potentially result in
injury, or is expected to result only
in property damage, if equipment is
handled incorrectly.
sUse microSD/microSDHC memory
cards only. Never place other types
of cards in the voice recorder.
If another card type is placed in the voice
recorder by accident, do not try to pull it out
by force. Contact an Olympus repair center
or service center.
EN
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety precautions
sIf the voice recorder is dropped in
water or, if water, metal or combus-
tible foreign matter gets inside:
1Remove the battery immediately.
2Contact your place of purchase or
an Olympus service center for repair.
Continued use may result in fire or
electric shock.
sDo not use the voice recorder or
use it only as directed in airplanes,
hospitals or other locations
where use of electronic devices is
restricted.
sStop using the voice recorder if
you notice unusual odor, noise, or
smoke coming from it.
It may cause fire or burns. Remove the
battery immediately, taking care not to burn
yourself. Contact your place of purchase
or an Olympus repair center or service
center. (Do not touch the battery with
bare hands when removing it. Remove the
battery outdoors, and away from flammable
objects.)
sWhen carrying the voice recorder
by its strap, take care to prevent it
becoming caught on other items.
Batteries
fDANGER
sDo not place the battery near
ignition sources.
sDo not incinerate, heat or disas-
semble the battery. Do not
short-circuit the battery’s positive
and negative electrodes.
It may cause fire, ruptures, combustion or
overheating.
sDo not solder connections directly
onto the battery. Do not deform,
modify or disassemble the battery.
sDo not connect the battery’s posi-
tive and negative terminals.
It may cause overheating, electric shock
or fire.
7
sWhen carrying or storing the
battery, always place it in the case
and protect its terminals. Do not
carry or store the battery together
with precious metal items such as
key rings.
It may cause overheating, electric shock
or fire.
sDo not connect the battery directly
to a power outlet or car cigarette
lighter.
sDo not use or leave the battery
in a hot location such as in direct
sunlight, inside a vehicle on a hot
day, or near a room heater.
It may cause fire, burns or injuries from
leaking, overheating or ruptures.
fCAUTION
sDo not raise the volume before
performing an operation.
Hearing damage or loss may result.
EN
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety precautions
sIf you notice abnormal sound,
heat, burning odor or smoke from
the voice recorder during use:
1Remove the battery immediately, taking
care not to injure yourself.
2Have the voice recorder repaired by your
place of purchase or an Olympus service
center. Continued use may result in fire
or burns.
sDo not submerge the battery in
freshwater or saltwater, or allow its
terminals to become wet.
sDiscontinue use of the battery if it
develops a problem such as leak-
ing, discoloration or deformation.
sStop charging the rechargeable
battery if charging has not finished
after the specified amount of
charging time.
fWARNING
sDo not touch or hold the battery
with wet hands.
It may cause electric shock or malfunctions.
sDo not use a battery with a
scratched or damaged case.
It may cause ruptures or overheating.
sDo not insert the battery with its
positive/negative terminals in the
opposite direction.
It may cause leaking, overheating,
combustion or ruptures.
•
Do not use a battery with a torn casing
seal (insulating covering).
•
Always remove the battery when the
voice recorder will not be used for an
long period.
•
•
When disposing used batteries, insulate
their contacts with tape and discard
them as general waste in the manner
prescribed by the local authority.
Remove the battery from the voice
recorder as soon as the battery becomes
unusable. It may cause leakage.
7
sBattery fluid on clothing or skin
may damage the skin, so rinse the
battery fluid off right away with
tap water or other clean water.
fCAUTION
sBattery fluid in the eyes may cause
blindness. If battery fluid gets in
eyes, do not rub the eyes. Instead,
rinse them thoroughly with tap
water or other clean water right
away. Go to doctor immediately.
sDo not attempt to recharge
alkaline, lithium or any other
non-rechargeable batteries.
sKeep the battery out of the reach
of infants and children.
The battery could be swallowed by an
infant or child. If swallowed, go to doctor
immediately.
sDo not throw the battery around,
or subject it to strong shocks.
sAlways charge the rechargeable
battery before use when using
it for the first time or if it has not
been used for a long time.
sRechargeable batteries have a
limited life. When the recorders
operating time becomes shorter
after recharging under the speci-
fied condition, please consider
that battery is expired and replace
it with a new one.
EN
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety precautions
<Data loss precautions>
Disposing the rechargeable
battery
sRecycling batteries helps saving
resources. When disposing a used
battery, always cover its terminals
and observe local laws and regula-
tions.
•
Recorded content in the internal memory
and microSD card may be destroyed or
lost due to reasons such as operating
errors, device failure or repair.
•
Also, when content is saved in the
memory for long period of time or is used
repeatedly, operations such as writing to,
reading from, or erasing of contents may
not be possible.
Operating precautions
•
•
Making a backup of important recorded
information and saving it on a PC’s
hard disk or other recording media is
recommended.
Note that Olympus will assume no liability
for damages or lost earnings resulting
from recorded data damage or loss,
regardless of the nature or cause thereof.
•
Do not leave the voice recorder in hot or
humid locations such as in direct sunlight
inside a vehicle, or on a beach during
summer.
•
•
Do not store the voice recorder in humid
or dusty locations.
If the voice recorder becomes wet or
damp, wipe off the moisture right away
with a dry cloth. Contact with salt water
should be particularly avoided.
Do not place the voice recorder on top of
or near a TV, refrigerator or other electrical
appliance.
Prevent sand or mud from getting on the
voice recorder. It may cause product not to
be repairable.
<Recorded file precautions>
•
Note that Olympus will assume no
liability for recorded files being erased
or becoming unplayable due to voice
recorder or PC failure.
7
•
•
•
Recording of copyrighted material is
permitted when the recording is for your
personal use only. Any other type of use
without the permission of the copyright
owner is prohibited by copyright law.
•
•
•
Do not subject the voice recorder to
intense vibrations or shocks.
Do not use the voice recorder in humid
locations.
Placing a magnetic card (such as a bank
cash card) near the speaker or earphones
may cause errors in the data stored on the
magnetic card.
<Voice recorder and microSD cards
disposal precautions>
•
Even when formatting (☞ P.91) or
erasing (☞ P.46) are performed, only
the file management information of the
internal memory and/or microSD card
is updated and the recorded data is not
completely erased.
<Radio reception precaution>
•
Reception quality will vary greatly
When disposing of the voice recorder or a
microSD card, be sure to destroy it, format
and record silence until the recording time
runs out, or perform a similar operation in
order to prevent the leakage of personal
information.
depending on where the radio is being
used. If the reception is poor, try moving
the voice recorder near a window and
away from electric appliances such as
mobile phones, TVs or fluorescent lights.
EN
110
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
*
Recording media
4
General items
Internal NAND flash memory
WS-823 model: 8 GB; WS-822 model:
4 GB; WS-821 model: 2 GB
microSD card
(Supports card capacities ranging from
2 to 32 GB.)
4
Recording formats
Linear PCM (pulse-code modulation)
format (WS-823 and WS-822 models only)
MP3 (MPEG-1 Audio Layer 3) format
WMA (Windows Media Audio) format
*
Some recording media memory
capacity is used as a management
area, so the actual usable capacity
will always be slightly less than the
displayed capacity.
4
Sampling frequency
Linear PCM format
44.1 kHz/16 bits*1
44.1 kHz
MP3 format
4
Speaker
256 kbps*1
192 kbps*2
128 kbps
44.1 kHz
44.1 kHz
44.1 kHz
Built-in 18 mm diameter round dynamic
speaker
MIC jack
3.5 mm diameter; Impedance: 2 kΩ
4
4
EAR jack
WMA format
3.5 mm diameter; Impedance: 8 Ω
minimum
Power source
7
32 kbps
8 kbps
44.1 kHz
8 kHz
4
Standard voltage: 1.5 V
*1 WS-823 and WS-822 models only
*2 WS-821 model only
Maximum working output
150 mW (8 Ω speaker)
Battery: One AAA dry cell battery (model
LR03), or one Olympus nickel-metal
hydride rechargeable battery
External power supply: USB-connection
AC adapter (model A514; 5 VDC)
External dimensions
101 × 40.6 × 15.1 mm (Not including
largest projection)
Weight
54 g (including battery)
Operating temperature
0 to 42°C (32 to 107.6°F)
Receivable radio frequency range
FM radio: 87.5 to 108.0 MHz
4
4
4
Maximum earphone output
â150 mV (conforms to EN 50332-2)
Wide band characteristic
earphone output
4
75 mV (conforms to EN 50332-2)
â
4
4
4
EN
111
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Frequency response
4
When recording from MIC jack
Linear PCM format
44.1 kHz/16 bits*1
40 Hz to 21 kHz
MP3 format
256 kbps*1
192 kbps*2
128 kbps
40 Hz to 20 kHz
40 Hz to 19 kHz
40 Hz to 17 kHz
WMA format
32 kbps
8 kbps
40 Hz to 13 kHz
40 Hz to 3 kHz
*1 WS-823 and WS-822 models only
*2 WS-821 model only
7
4
4
When recording with built-in
stereo microphone
70 Hz to 20 kHz (frequency response
upper limit is set by recording mode
during MP3/WMA-format recording)
During playback
20 Hz to 20 kHz
EN
112
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Battery life
The figures below are guideline values.
4
When recording with built-in stereo microphone (using internal memory)
Alkaline dry cell
battery
Nickel-metal hydride
rechargeable battery
Recording mode
Linear PCM format
44.1 kHz/16 bits*
20 hours (approx.)
15 hours (approx.)
MP3 format
128 kbps
32 kbps
8 kbps
27 hours (approx.)
32 hours (approx.)
37 hours (approx.)
21 hours (approx.)
24 hours (approx.)
28 hours (approx.)
WMA format
4
During audio file playback (all playback modes)
During speaker playback
Alkaline dry cell
Nickel-metal hydride
rechargeable battery
Recording mode
battery
Linear PCM format
44.1 kHz/16 bits*
19 hours (approx.)
15 hours (approx.)
MP3 format
128 kbps
32 kbps
8 kbps
21 hours (approx.)
21 hours (approx.)
24 hours (approx.)
17 hours (approx.)
17 hours (approx.)
20 hours (approx.)
WMA format
7
During earphone playback
Alkaline dry cell
battery
Nickel-metal hydride
rechargeable battery
Recording mode
Linear PCM format
MP3 format
44.1 kHz/16 bits*
22 hours (approx.)
17 hours (approx.)
128 kbps
32 kbps
8 kbps
29 hours (approx.)
30 hours (approx.)
30 hours (approx.)
21 hours (approx.)
22 hours (approx.)
22 hours (approx.)
WMA format
* WS-823 and WS-822 models only
4
During FM radio mode (using internal memory; WS-823 model only)
During earphone playback
Alkaline dry cell
battery
12 hours (approx.)
Nickel-metal hydride
Voice recorder status
rechargeable battery
11 hours (approx.)
8 hours (approx.)
Receiving FM radio
Recording FM radio (MP3 format 128 kbps)
8 hours (approx.)
EN
113
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
NOTE
• The battery life figures shown here were determined using an Olympus test method.
Actual battery life figures will vary greatly according to the battery used and usage
conditions.
• Battery life will be shorter when using a nickel-metal hydride rechargeable battery that
has been used repeatedly.
• Battery life will be shorter when using a microSD card.
• Changing the playback speed and tone, or using the [Zoom Mic], [Noise Cancel],
[Voice Balancer] and [Voice Filter] functions may affect the battery life.
Recording time
The figures below are guideline values.
4
Linear PCM format
Recording mode
44.1 kHz/16 bits
Recording media
WS-823 model (8 GB)
WS-822 model (4 GB)
11 hours, 30 minutes (approx.)
5 hours, 45 minutes (approx.)
48 hours (approx.)
23 hours, 30 minutes (approx.)
11 hours, 30 minutes (approx.)
Internal memory
microSD card
7
32 GB
16 GB
8 GB
4
MP3 format
Recording mode
192 kbps
Recording media
WS-823 model
256 kbps
128 kbps
65 hours (approx.)
130 hours (approx.)
(8 GB)
WS-822 model
(4 GB)
Internal
memory
32 hours, 30 minutes
(approx.)
65 hours (approx.)
32 hours (approx.)
WS-821 model
21 hours, 30 minutes
(approx.)
(2 GB)
32 GB
16 GB
8 GB
265 hours (approx.)
132 hours (approx.)
66 hours (approx.)
353 hours (approx.)
176 hours (approx.)
88 hours (approx.)
530 hours (approx.)
264 hours (approx.)
132 hours (approx.)
microSD
card
EN
114
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
4
WMA format
Recording mode
Recording media
WS-823 model
32 kbps
8 kbps
505 hours (approx.)
1980 hours (approx.)
1000 hours (approx.)
493 hours (approx.)
(8 GB)
WS-822 model
(4 GB)
Internal
memory
257 hours (approx.)
126 hours (approx.)
WS-821 model
(2 GB)
32 GB
16 GB
8 GB
2070 hours (approx.)
1030 hours (approx.)
515 hours (approx.)
8100 hours (approx.)
4030 hours (approx.)
2010 hours (approx.)
microSD
card
NOTE
• Actual available recording times may be shorter than the figures shown here when
making short recordings repeatedly (Equipment displays of available/elapsed recording
times should be considered guideline values).
• Available recording time will also vary due to differences in the available memory
capacity of different microSD cards.
7
EN
115
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Maximum recording time per file
Number of music tracks (songs) that can
be recorded
• The maximum file size is limited to about
4 GB in the WMA and MP3 formats, and to
about 2 GB in the linear PCM (WAV) format.
• Regardless of the amount of remaining
memory, the maximum recording time per
file is restricted to the following values:
The figures below are guideline values.
WS-823 model (8 GB)
WS-822 model (4 GB)
WS-821 model (2 GB)
1,950 tracks (approx.)
950 tracks (approx.)
450 tracks (approx.)
4
Linear PCM format
Recording mode
(At 128 kbps, 4 minutes per track)
Recording time
3 hours, 20 minutes
(approx.)
44.1 kHz/16 bits*1
4
MP3 format
Recording mode
256 kbps*1
Recording time
37 hours, 10 minutes
(approx.)
49 hours, 30 minutes
(approx.)
74 hours, 30 minutes
(approx.)
192 kbps*2
128 kbps
7
4
WMA format
Recording mode
32 kbps
Recording time
26 hours, 40 minutes
(approx.)
148 hours, 40 minutes
(approx.)
8 kbps
*1 WS-823 and WS-822 models only
*2 WS-821 model only
Note that voice recorder specifications
and appearance are subject to change
without prior notice for performance
improvements or other upgrading.
EN
116
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Notice
Radio and Television Interference
●
●
Changes or modifications not expressly approved by the manufacturer may void the user’s
authority to operate this equipment. This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
●
●
•
•
•
Adjust or relocate the receiving antenna.
Increase the distance between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver
is connected.
•
Consult your dealer or an experienced radio/TV technician for help. Only the OLYMPUS-
supplied USB cable should be used to connect the equipment to USB enabled personal
computers (PC).
Any unauthorized changes or modifications to this equipment would void the user’s authority
to operate it.
For customers in North and South America
4
For customers in USA
Declaration of Conformity
Model Number: WS-823/WS-822/WS-821
Trade Name: DIGITAL VOICE RECORDER
Responsible Party: OLYMPUS IMAGING AMERICA INC.
Address: 3500 Corporate Parkway, P.O. Box 610, Center Valley, PA 18034-0610, U.S.A.
Telephone Number: 484-896-5000
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
4
For customers in CANADA
CAN ICES-3 (B) / NMB-3 (B)
Download from Www.Somanuals.com. All Manuals Search And Download.
OLYMPUS IMAGING CORP.
2951 Ishikawa-machi, Hachioji-shi, Tokyo 192-8507, Japan.
OLYMPUS IMAGING AMERICA INC.
3500 Corporate Parkway, P.O. Box 610, Center Valley, PA 18034-0610, U.S.A.
Tel. 484-896-5000
Technical Support (USA):
Our phone customer support is available
from 9 am to 9 pm (Monday to Friday) ET
http://www.olympusamerica.com/
contactus
24/7 online automated help:
http://www.olympusamerica.com/
support
Phone customer support:
Tel.: 1-888-553-4448 (Toll-free)
Olympus software updates can be
obtained at:
http://www.olympusamerica.com/digital
EN-BD3924-02 AP1309
Download from Www.Somanuals.com. All Manuals Search And Download.
|