d-Copiia 18MF
Operation Guide
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
PUBLICATION ISSUED BY:
Olivetti S.p.A.
Gruppo Telecom Italia
Via Jervis, 77 - 10015 Ivrea (ITALY)
Copyright © 2005, Olivetti
All rights reserved
The
mark affixed to the product certifies that
the product satisfies the basic quality
requirements.
May 2005
The manufacturer reserves the right to carry out modifications to the product described in this manual at any time
and without any notice.
ENERGY STAR is a U.S. registered mark.
The ENERGY STAR program is an energy reduction plan introduced by theUnited States Environmental Protection
Agency in response to environmental issues and for the purpose of advancing the development and utilization of
more energy efficient office equipment.
Your attention is drawn to the following actions which could compromise the conformity attested to above, as well
as the characteristics of the product:
• incorrect electrical power supply;
• incorrect installation, incorrect or improper use or use not in compliance with the warnings provided in the
User’s Manual supplied with the product;
• replacement of original components or accessories with others of a type not approved by the manufacturer, or
performed by unauthorised personnel.
All rights reserved. No part of this material may be reproduced or transmitted in any
form or by any means, electronic or mechanical, including photocopying, recording or
by any information storage and retrieval system, without permission in writing from
the Publisher.
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Full Use of This Machine’s Advanced Functions
1
Enlarging/reducing copies to 2
a desired size between 50 %
and 200 % Zoom mode
Copying at a previously
registered zoom ratio
Standard Zoom mode
3
Making clear reproductions
of photographs Image
quality selection (Refer to
50 %
200 %
4
Saving on toner use
EcoPrint mode (Refer to the
Advanced Operation Guide.)
5
Making one copy from either 6
two or four originals
Combine modes (Refer to
the Advanced Operation
Guide.)
Collating automatically
4-6)
7
Interrupting the current job
using Print Override mode
8
Sending scanned data by e- 9
Making full-color scans
10 Loading an image from
11 Storing address information 12 Managing the number of
Address Book (Refer to the
scans and prints by Job
Advanced Operation Guide)
Account (Refer to the
Advanced Operation Guide)
3
2
4
5
1
6
A
B
C
OPERATION GUIDE
i
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Document Processor (Refer
to the Advanced Operation
Guide)
13 Changing the operational
environment by each
14 A full range of optional
equipment is available
individual user User Login
(Refer to the Advanced
Operation Guide)
•
Paper Feeder (Refer to the
Advanced Operation Guide)
•
Expansion Memory (Refer to •
the Advanced Operation
Guide)
FAX System (Refer to the
Advanced Operation Guide)
ii
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Adjusting the Paper Stopper for Folio or Oficio II Size Page . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Connecting the Network Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Registering the IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Registering the Default Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Date and Time Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Setting the Time Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Summer Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Setting the Current Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Keys Used for Entering Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Available Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
List of Character Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
Entering Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10
Basic Copying Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Canceling Copy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Variable Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Scan to E-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
OPERATION GUIDE
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Scan to Folder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11
Recipient Selection from One-Touch Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13
Scan with TWAIN Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13
Replacing Toner Container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Cleaning the Charger and the Registration Roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Maintenance and Error Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Jam Location Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
MP Tray and Inside Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
Face-up Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
Optional Document Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10
Printing Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3
Document Processor (Option). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4
Paper Feeder (Option) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4
iv
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal and Safety
CAUTION: No liability is assumed for any damage caused by improper installation.
Notice
The information in this guide is subject to change without notification. Additional
pages may be inserted in future editions. The user is asked to excuse any technical
inaccuracies or typographical errors in the present edition.
No responsibility is assumed if accidents occur while the user is following the
instructions in this manual. No responsibility is assumed for defects in the printer’s
firmware (contents of its read-only memory).
This guide, any copyrightable subject matter sold or provided with or in connection
with the sale of the machine, are protected by copyright. All rights are reserved the
prior written consent of the owner of the copyright is prohibited. Any copies made of
all or part of this manual, any copyrightable subject must contain the same copyright
notice as the material from which the copying is done.
Regarding Tradenames
Diablo 630 is a product of Xerox Corporation. IBM Proprinter X24E is a product of
International Business Machines Corporation. Epson LQ-850 is a product of Seiko
Epson Corporation. Hewlett-Packard, PCL, and PJL are registered trademarks of
Hewlett-Packard Company. Centronics is a trade name of Centronics Data
Computer Corp. PostScript is a registered trademark of Adobe Systems
Incorporated. Macintosh is a registered trademark of Apple computer, Inc. Microsoft,
Windows, and Windows NT are registered trademarks of Microsoft Corporation.
PowerPC is a trademark of International Business Machines Corporation. ENERGY
STAR is a U.S. registered mark. All other brand and product names are registered
trademarks or trademarks of their respective companies.
The product uses PeerlessPrintXL to provide the HP LaserJet compatible
PCL6 language emulation. PeerlessPrintXL is a trademark of the Peerless Systems
Corporation, 2381 Rosecrans Ave. El Segundo, CA 90245, U.S.A.
™
®
This product contains UFST and MicroType from Agfa Monotype
Corporation.
GPL
firmware. For further information including availability of the source code, to
address to the retailer from which the product it has been acquired.
OPERATION GUIDE
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal and Safety
Legal Restriction On Copying
It may be prohibited to copy copyrighted material without permission of the copyright
owner.
It is prohibited under any circumstances to copy domestic or foreign currencies.
Copying other items may be prohibited.
Agfa Japan License Agreement
1
2
“Software” shall mean the digitally encoded, machine readable, scalable
outline data as encoded in a special format as well as the UFST Software.
You agree to accept a non-exclusive license to use the Software to reproduce
and display weights, styles and versions of letters, numerals, characters and
symbols (“Typefaces”) solely for your own customary business or personal
purposes at the address stated on the registration card you return to Agfa
Japan. Under the terms of this License Agreement, you have the right to use
the Fonts on up to three printers. If you need to have access to the fonts on
more than three printers, you need to acquire a multi-user license agreement
which can be obtained from Agfa Japan. Agfa Japan retains all rights, title and
interest to the Software and Typefaces and no rights are granted to you other
than a License to use the Software on the terms expressly set forth in this
Agreement.
3
To protect proprietary rights of Agfa Japan, you agree to maintain the Software
and other proprietary information concerning the Typefaces in strict confidence
and to establish reasonable procedures regulating access to and use of the
Software and Typefaces.
4
5
You agree not to duplicate or copy the Software or Typefaces, except that you
may make one backup copy. You agree that any such copy shall contain the
same proprietary notices as those appearing on the original.
This License shall continue until the last use of the Software and Typefaces,
unless sooner terminated. This License may be terminated by Agfa Japan if
you fail to comply with the terms of this License and such failure is not
remedied within thirty (30) days after notice from Agfa Japan. When this
License expires or is terminated, you shall either return to Agfa Japan or
destroy all copies of the Software and Typefaces and documentation as
requested.
6
7
You agree that you will not modify, alter, disassemble, decrypt, reverse
engineer or decompile the Software.
Agfa Japan warrants that for ninety (90) days after delivery, the Software will
perform in accordance with Agfa Japan-published specifications, and the
diskette will be free from defects in material and workmanship. Agfa Japan
does not warrant that the Software is free from all bugs, errors and omissions.
The parties agree that all other warranties, expressed or implied, including
warranties of fitness for a particular purpose and merchantability, are excluded.
vi
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal and Safety
8
9
Your exclusive remedy and the sole liability of Agfa Japan in connection with
the Software and Typefaces is repair or replacement of defective parts, upon
their return to Agfa Japan.
In no event will Agfa Japan be liable for lost profits, lost data, or any other
incidental or consequential damages, or any damages caused by abuse or
misapplication of the Software and Typefaces.
New York, U.S.A. law governs this Agreement.
10 You shall not sublicense, sell, lease, or otherwise transfer the Software and/or
Typefaces without the prior written consent of Agfa Japan.
11 Use, duplication or disclosure by the Government is subject to restrictions as
set forth in the Rights in Technical Data and Computer Software clause at FAR
252-227-7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as appropriate.
Further use, duplication or disclosure is subject to restrictions applicable to
restricted rights software as set forth in FAR 52.227-19 (c)(2).
12 You acknowledge that you have read this Agreement, understand it, and agree
to be bound by its terms and conditions. Neither party shall be bound by any
statement or representation not contained in this Agreement. No change in this
Agreement is effective unless written and signed by properly authorized
representatives of each party. By opening this diskette package, you agree to
accept the terms and conditions of this Agreement.
Energy Star Program
We have determined as a participating company in the International Energy Star
Program that this product is compliant with the standards laid out in the International
Energy Star Program.
The International Energy Star Program has as its basic goals the promotion of
efficient energy use and the reduction of the environmental pollution that
accompanies energy consumption by promoting the manufacture and sale of
products that fulfill program standards.
International Energy Star Program standards require that multifunction devices
come equipped with a Low Power Mode where printer and fax functions remain in a
waiting state but energy consumption is still reduced after a certain amount of time
elapses since the device was last used, as well as a Sleep Mode where printer and
fax functions remain in a waiting state but power consumption is still reduced to a
minimum when there is no activity with the device within a set amount of time. This
product is equipped with the following features as a result of its compliance with
International Energy Star Program standards.
Low Power Mode
The device automatically enters low power mode when 5 minutes have passed since
the device was last used. The amount of time of no activity that must pass before
Low Power Mode is activated may be lengthened. For further information refer to
Auto Sleep
The device automatically enters Sleep Mode when 30 minutes have passed since
the device was last used. The amount of time of no activity that must pass before
OPERATION GUIDE
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal and Safety
Paper Recycling
The Energy Star Program encourages the use of environmentally friendly recycled
paper. Your sales or service representative can provide information about
recommended paper types.
Please read this Operation Guide before using the machine. Keep it close
to the machine for easy reference.
The sections of this guide and parts of the machine marked with symbols are safety
warnings meant to protect the user, other individuals and surrounding objects, and
ensure correct and safe usage of the machine. The symbols and their meanings are
indicated below.
DANGER: Indicates that serious injury or even death will very possibly
result from insufficient attention to or incorrect compliance with the
related points.
WARNING: Indicates that serious injury or even death may result from
insufficient attention to or incorrect compliance with the related points.
CAUTION: Indicates that personal injury or mechanical damage may
result from insufficient attention to or incorrect compliance with the
related points.
Symbols
The following symbols indicate that the related section includes safety warnings.
Specific points of attention are indicated inside the symbol.
.... [General warning]
.... [Warning of danger of electrical shock]
.... [Warning of high temperature]
The following symbols indicate that the related section includes information on
prohibited actions. Specifics of the prohibited action are indicated inside the symbol.
.... [Warning of prohibited action]
.... [Disassembly prohibited]
viii
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal and Safety
The following symbols indicate that the related section includes information on
actions which must be performed. Specifics of the required action are indicated
inside the symbol.
.... [Alert of required action]
.... [Remove the power plug from the outlet]
.... [Always connect the machine to an outlet with a ground connection]
Please contact your service representative to order a replacement if the safety
warnings in this Operation Guide are illegible or if the guide itself is missing. (fee
required)
OPERATION GUIDE
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal and Safety
IMPORTANT - PLEASE READ FIRST.
CAUTION LABELS
Caution labels have been attached to the machine at the following locations for
safety purposes.
Be sufficiently careful to avoid fire or electric shock when removing a paper jam or
when replacing toner.
NOTE: Do not remove these labels.
Label 1
High temperature inside.
Do not touch parts in this area, because
there is a danger of getting burned. ...........
Label 2
High temperature inside.
Do not touch parts in this area, because
there is a danger of getting burned. ...........
x
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal and Safety
Installation Precautions
Environment
CAUTION:
Avoid placing the machine on or in locations which are unstable or not
level. Such locations may cause the machine to fall down or fall over. This
type of situation presents a danger of personal injury or damage to the
machine.
Avoid locations with humidity or dust and dirt. If dust or dirt become
attached to the power plug, clean the plug to avoid the danger of fire or
electrical shock.
Avoid locations near radiators, heaters, or other heat sources, or locations
near flammable items, to avoid the danger of fire.
To keep the machine cool and facilitate changing of parts and
maintenance, allow access space as shown below. Leave adequate
space, especially around the vents, to allow air to be properly ventilated
out of the machine.
Rear:
11 13/16"
30 cm
Left:
11 13/16"
30 cm
Front:
Right:
39 3/8"
11 13/16"
100 cm
30 cm
Other Precautions
Adverse environmental conditions may affect the safe operation and performance of
the machine. Install in an air-conditioned room (recommended room temperature:
around 73.4 °F (23 °C), humidity: around 60 %RH), and avoid the following locations
when selecting a site for the machine.
•
•
•
•
•
Avoid locations near a window or with exposure to direct sunlight.
Avoid locations with vibrations.
Avoid locations with drastic temperature fluctuations.
Avoid locations with direct exposure to hot or cold air.
Avoid poorly ventilated locations.
OPERATION GUIDE
xi
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal and Safety
During copying, some ozone is released, but the amount does not cause any ill effect
to one's health. If, however, the machine is used over a long period of time in a poorly
ventilated room or when making an extremely large number of copies, the smell may
become unpleasant. To maintain the appropriate environment for copy work, it is
suggested that the room be properly ventilated.
Power Supply/Grounding the Machine
WARNING:
Do not use a power supply with a voltage other than that specified. Avoid
multiple connections in the same outlet. These types of situations present
a danger of fire or electrical shock.
Plug the power cord securely into the outlet. If metallic objects come in
contact with the prongs on the plug, it may cause a fire or electric shock.
Always connect the machine to an outlet with a ground connection to avoid
the danger of fire or electrical shock in case of an electric short. If an earth
connection is not possible, contact your service representative.
Other Precautions
Connect the power plug to the closest outlet possible to the machine.
The power supply cord is used as the main disconnect device. Ensure that the
socket/outlet is located/installed near the equipment and is easily accessible.
Handling of Plastic Bags
WARNING:
Keep the plastic bags that are used with the machine away from children.
The plastic may cling to their nose and mouth causing suffocation.
xii
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal and Safety
Precautions for Use
Cautions when Using the Machine
WARNING:
Do not place metallic objects or containers with water (flower vases, flower
pots, cups, etc.) on or near the machine. This situation presents a danger
of fire or electrical shock should they fall inside.
Do not remove any of the covers from the machine as there is a danger of
electrical shock from high voltage parts inside the machine.
Do not damage, break or attempt to repair the power cord. Do not place
heavy objects on the cord, pull it, bend it unnecessarily or cause any other
type of damage.
These types of situations present a danger of fire or electrical shock.
Never attempt to repair or disassemble the machine or its parts as there is
a danger of fire, electrical shock or damage to the laser. If the laser beam
escapes, there is a danger of it causing blindness.
If the machine becomes excessively hot, smoke appears from the
machine, there is an odd smell, or any other abnormal situation occurs,
there is a danger of fire or electrical shock. Turn the power switch off (O)
immediately, be absolutely certain to remove the power plug from the
outlet and then contact your service representative.
If anything harmful (paper clips, water, other fluids, etc.) falls into the
machine, turn the power switch off (O) immediately. Next, be absolutely
certain to remove the power plug from the outlet to avoid the danger of fire
or electrical shock. Then contact your service representative.
Do not remove or connect the power plug with wet hands, as there is a
danger of electrical shock.
Always contact your service representative for maintenance or repair of
internal parts.
OPERATION GUIDE
xiii
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal and Safety
CAUTION
Do not pull the power cord when removing it from the outlet. If the power cord is
pulled, the wires may become broken and there is a danger of fire or electrical shock.
(Always grasp the power plug when removing the power cord from the outlet.)
Always remove the power plug from the outlet when moving the machine.
If the power cord is damaged, there is a danger of fire or electrical shock.
If the machine will not be used for a short period of time (overnight, etc.),
turn the power switch off (O). If it will not be used for an extended period of
time (vacations, etc.), remove the power plug from the outlet for safety
purposes during the time the machine is not in use.
Always hold the designated parts when lifting or moving the machine.
For safety purposes, always remove the power plug from the outlet when
performing cleaning operations.
If dust accumulates within the machine, there is a danger of fire or other
trouble. It is therefore recommended that you consult with your service
representative in regard to cleaning of internal parts. This is particularly
effective if accomplished prior to seasons of high humidity. Consult with
your service representative in regard to the cost of cleaning the internal
parts of the machine.
Other Precautions
Do not place heavy objects on the machine or cause other damage to the machine.
Do not open the upper front cover, turn off the power switch, or pull out the power
plug during copying.
When lifting or moving the machine, contact your service representative.
Do not touch electrical parts, such as connectors or printed circuit boards. They
could be damaged by static electricity.
Do not attempt to perform any operations not explained in this handbook.
xiv
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal and Safety
CAUTION
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
Do not look directly at the light from the scanning lamp as it may cause your eyes to
feel tired or painful.
Cautions when Handling Consumables
CAUTION
Do not attempt to incinerate the Toner Container. Dangerous sparks may
cause burns.
Keep the Toner Container out of the reach of children.
If toner happens to spill from the Toner Container, avoid inhalation and
ingestion, as well as contact with your eyes and skin.
•
If you do happen to inhale toner, move to a place with fresh air and
gargle thoroughly with a large amount of water. If coughing develops,
contact a physician.
•
If you do happen to ingest toner, rinse your mouth out with water and drink 1 or
2 cups of water to dilute the contents of your stomach. If necessary, contact a
physician.
•
•
If you do happen to get toner in your eyes, flush them thoroughly with water. If
there is any remaining tenderness, contact a physician.
If toner does happen to get on your skin, wash with soap and water.
Do not attempt to force open or destroy the Toner Container.
Other Precautions
After use, always dispose of the Toner Container in accordance with Federal, State
and Local rules and regulations.
Store all consumables in a cool, dark location.
If the machine will not be used for an extended period of time, remove the paper from
the cassette, return it to its original package and reseal it.
OPERATION GUIDE
xv
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal and Safety
Laser Safety (Europe)
Laser radiation could be hazardous to the human body. For this reason, laser
radiation emitted inside this machine is hermetically sealed within the protective
housing and external cover. In the normal operation of the product by user, no
radiation can leak from the machine.
This machine is classified as Class 1 laser product under IEC 60825.
CAUTION: Performance of procedures other than those specified in this manual
may result in hazardous radiation exposure.
This label is attached to the laser scanner unit inside the machine and is not in a user
access area.
The labels shown below are attached on the rear side of the machine.
xvi
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal and Safety
Safety Instructions Regarding the Disconnection of Power (Europe)
CAUTION: The power plug is the main isolation device! Other switches on the
equipment are only functional switches and are not suitable for isolating the
equipment from the power source.
VORSICHT: Der Netzstecker ist die Hauptisoliervorrichtung! Die anderen Schalter
auf dem Gerät sind nur Funktionsschalter und können nicht verwendet werden, um
den Stromfluß im Gerät zu unterbrechen.
DECLARATION OF CONFORMITY
TO
89/336/EEC, 73/23/EEC and 93/68/EEC
We declare under our sole responsibility that the product to which
this declaration relates is in conformity with the following specifications.
Limits and methods of measurement for immunity
characteristics of information technology equipment EN55024
Limits and methods of measurement for radio
interference characteristics of information technology EN55022 Class B
equipment
Limits for harmonic currents emissions
EN61000-3-2
EN61000-3-3
for equipment input current 16A per phase
Limitation of voltage fluctuations and flicker in low-
voltage supply systems for equipment with rated
current 16A
Safety of information technology equipment,
including electrical equipment
EN60950
Radiation Safety of laser products, equipment
classification, requirements and user’s guide
EN60825-1
OPERATION GUIDE
xvii
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal and Safety
Introduction
This Basic Operation Guide has following chapters:
1
2
Machine Parts - identifies the names and functions of the machine and
operation panel.
Loading Paper - contains explanations on loading paper and attaching the
Face-up Tray.
3
4
Preparations - contains information on setting the machine up ready for use.
Basic Operation - explains how to make simple copies and prints and how to
scan originals.
5
6
Maintenance - describes the maintenance and toner replenishment
procedures.
Troubleshooting- explains how to handle problems such as error indications
or paper jams.
Appendix A - Specifications - contains machine specifications
Guides included
The following guides are included with this machine. Refer to the guide that
corresponds to your particular objective.
Installation Guide
This Guide contains instructions for assembling and installing the machine.
Operation Guide (This guide)
This Operation Guide contains explanations on the initial installation and set-up of
this machine, the procedure to connect it to a computer, and the basic procedures
for using this machine as a copier, printer, and scanner as well for resolving
problems if trouble occurs.
Advanced Operation Guide
The Advanced Operation Guide contains explanations on copier, printer, and
scanner functions as well as default settings that can be adjusted on this machine.
This guide is stored on the CD-ROM as a PDF document.
KX Driver User Guide
Describes how to install and set the printer driver. This guide is stored on the CD-
ROM as a PDF document.
OPERATION GUIDE
xviii
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal and Safety
Network tool for Clients Operation Guide
Network tool for Clients is a network printing utility intended to monitor and configure the
printing system. This guide describes how to install and operate Network tool for Clients.
This guide is stored on the CD-ROM as a PDF document.
Network tool for Direct Printing Operation Guide
Network tool for Direct Printing is a utility that allows you to directly print PDF files without
starting Adobe Acrobat by directly sending a PDF file through the Windows spooler.
This guide describes how to install and operate Network tool for Direct Printing. This
guide is stored on the CD-ROM as a PDF document.
Network FAX Driver Operation Guide
Describes how to use the Network FAX Driver to send documents created on a
network computer directly from that computer to the other fax machine. This guide is
stored on the CD-ROM as a PDF document.
Conventions
This manual uses the following conventions.
Convention
Description
Example
Italic Typeface
Used to denote messages or
A Completed message displays and the
names displayed on the operation Copy Basic screen returns.
panel, names of machine parts
and for references to additional
information and other publications.
Bold Typeface
Notes
Used for emphasis and to denote To cancel copying, press Stop/Clear.
buttons on the operation panel.
Used to provide additional or
useful information about a function
or feature. Can also contain
NOTE: For information about storing the
pin, refer to step 10.
references to other publications.
Important
Caution
Used to provide important
information.
IMPORTANT: Ensure paper is not folded,
curled, or damaged.
Cautions are statements that
suggest mechanical damage as a
result of an action.
CAUTION: Do not pull the cassette out
when holding the front of the machine.
Warning
Used to alert users to the
possibility of personal injury.
WARNING: High voltage is present in
the charger section.
xiv
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Machine Parts
Main Body
1
2
7
8
3
4
5
6
9
10
11
1
2
3
4
5
6
7
8
9
Original Cover
Platen
Original Size Indicator Plate
Operation Panel
Top Cover
Front Cover
Process Unit
Charger Cleaner
Lock Lever
10 Toner Container
11 Toner Container Release Lever
OPERATION GUIDE
1-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Machine Parts
12
13
14
15
15
17
17
16
18
19
12 Output Tray
13 Stopper Extension Lock
14 Paper Stopper
15 Paper Width Guides
16 Cassette
17 Paper Width Guides (MP Tray)
18 MP (Multi-Purpose) Tray
19 MP Tray Extension
1-2
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
MachineParts
20
21
22
23
24
25
26
27
20 Document Processor Connector
21 Parallel Interface Connector
22 USB Interface Connector
23 Right Cover Anchor Pin
24 Network Interface Connector
25 Rear Cover (Face-up Tray)
26 Power Switch
27 Power Cord Receptacle
OPERATION GUIDE
1-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Machine Parts
Operation Panel
5
10
13
1
2
4
6
7
8
9
11
12
14
15
16
3
17
18
20
22
23
24
25
27
29
30
31
32
19
21
26
28
1
2
3
4
5
6
7
8
9
Status/Job Cancel Key and Indicator
Copy Key and Indicator
17 Send Key and Indicator
18 Original Quality Key and Indicator
19 Original Size Key and Indicator
20 Exposure Key and Indicator
21 Paper Select Key and Indicator
22 Message Display
23 Left Select Key
One-touch Keys (1 to 8)
Scan Color Select Key and Indicator
Program Key and Indicator
Scan Resolution Key and Indicator
Function Key and Indicator
Print Indicator
24 Right Select Key
25 W Key
Send/Receive Indicator
10 Memory Indicator
26 Back Key
11 Error Indicator:
27 S Key
-
-
Flashing red indicates an error has occurred.
28 T Key
Continuous red indicates a mechanical problem.
Turn the power switch off and then back on.
29 Enter Key
30 X Key
31 Stop/Clear Key
12 System Menu/Counter Key and Indicator
13 Log Out Key and Indicator
14 Numeric Keys
32 Start Key and Indicator
15 Reset/Power Key
16 Main Power Indicator
1-4
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
MachineParts
Message Display
The following examples explain the messages and icons used on the message
display.
1
2
Ready to copy.
Ready to send.
8
9
11
6
7
Dest.: 3
Set: 1
A 4
A 4
100%
Zoom
3
4
5
10
Left
Placemnt
Off
5
Subject
Copier Screen
Send Screen
Reference
number
Meaning
Indicates the current status of the machine. Also displays the title of the
current menu whenever the operation panel is being used.
1
Displays an icon that indicates the currently selected source of paper feed.
The meaning of each icon is as indicated below.
2
The standard paper cassette is currently selected. When this icon is
displayed as , there is no paper is the cassette.
The paper cassette for the optional paper feeder is currently
selected. When this icon is displayed as , there is no paper is the
cassette.
The MP Tray is currently selected.
Displays the size of the original(s).
3
4
Displays the current setting when there is a corresponding menu that can be
selected using the left or right Select keys.
Displays the title of the corresponding menu that can be selected using the
left or right Select keys.
5
Displays the number of copies.
Displays the paper size to be copied.
Displays the number of destinations.
Displays the destination.
6
7
8
9
Displays Italic when top edge to rear has been selected as the original
placement setting, and Left when top edge to left has been selected.
10
Displays On when the e-mail subject or message field contains an entry or
Off when there is no entry.
11
OPERATION GUIDE
1-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Machine Parts
1-6
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Loading Paper
Paper can be loaded into the cassette or on the MP tray. For details on the media
types that can be used, refer to the Advanced Operation Guide.
After taking new paper out of its packet, fan
it to separate the sheets before loading it.
If you are using paper that has been folded
or is curled, straighten it out before loading
it. Failure to do so may result in a paper jam.
If you will not be using the machine for a
prolonged period of time, remove all paper
from the machine and seal in its original
packaging to protect it against moisture.
Be sure to remove any staples or paper clips to avoid a reduction in print quality or
damage to the machine.
Loading Paper Into a Cassette
For details of the paper size and type that can be loaded into a cassette, refer to the
Advanced Operator Guide.
Carefully pull the cassette all the way out of
the machine.
1
Adjust the paper length by pressing in on
the release buttons and sliding paper
stopper to fit the size of the paper. The
paper sizes are marked on the bottom of the
cassette.
2
The default settings are for A4/US Letter
paper. Refer to Adjusting the Paper Stopper
OPERATION GUIDE
2-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Paper
Adjust the paper width by pressing in on the
release buttons and sliding the guides to fit
the width of the paper.
3
4
Place the paper in the cassette, with side to
be printed downward, so that the leading
edge is aligned against the paper stopper.
Be sure that none of the paper gets caught
on the overhanging tabs, that there is no
gap between the paper and the stopper or
guides and that it does not exceed the level
of the lines located on the width guides.
Push the cassette securely all the way back
into the machine until it stops.
5
6
Register the paper size loaded in the cassette. Refer to the Advanced Operation
Guide.
2-2
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
LoadingPaper
Adjusting the Paper Stopper for Folio or Oficio II Size Page
Slide the paper stopper towards the rear of
the cassette until the grooves that are cut
into the paper stopper are aligned with the
rear edge of the cassette.
1
2
3
4
Remove the stopper extension lock from the
paper stopper.
Insert the stopper extension lock into the
holes in the paper stopper.
Press down on the stopper extension lock
and slide the paper stopper towards the rear
of the cassette to set the lock into place. The
paper stopper is now in position for Folio
and Oficio II size paper.
Loading Paper on the MP Tray
For details of the paper size and type that can be loaded into the MP tray, refer to the
Advanced Operator Guide.
Only load the MP Tray when you are planning to use it. Do not leave paper in the MP
tray for long periods of time.
When using Legal, Oficio II or Folio size paper, it is recommended that you use the
cassette(s).
OPERATION GUIDE
2-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Paper
Open the MP tray towards you until it click
into place.
1
2
Pull out the MP tray extension and then flip
it open.
Adjust the paper width guides to fit the width
of the paper.
3
4
Slide the paper, with the side to be copied or
printed onto is facing upward, along the
paper width guides, as far as it will go.
2-4
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
LoadingPaper
Using the Face-up Tray
When copying and printing onto special paper, such as thick paper (90 to 163 g/m²),
and transparencies, always use the face-up tray. The face-up tray has a storage
capacity of approximately 30 sheets of standard paper (80 g/m²) but only 1 sheet of
special paper should be stored there at one time.
Open the face-up tray (located at the rear of
the machine).
1
Perform the standard copying or printing
procedure. Completed pages will be output
onto the face-up tray.
2
OPERATION GUIDE
2-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Paper
2-6
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Preparations
Connecting the Cables
The machine can be connected to a network or directly to a computer.
Connecting the Network Cable
When connecting the machine to the network, use the appropriate network cable
(10BASE-T or 100BASE-TX).
Turn the machine off, and remove the power
cord from the outlet.
1
Connect the network cable to the network
interface connector at the rear side of the
machine.
2
Connect the other end of the network cable to your network device.
3
4
Connecting the Parallel or USB Cable
To connect the machine directly to your computer, use either a parallel cable or USB
cable. For details refer to the Advanced Operation Guide.
Turn the machine off, remove the power
cord from the outlet and turn the computer
off.
1
OPERATION GUIDE
3-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Connect the printer cable to the appropriate
connector located at the rear side of the
machine.
2
Parallel
Cable
USB
Cable
Connect the other end of the printer cable to the appropriate connector on your
computer.
3
Connecting the Power Cord
Connect the power cord to the rear of the
machine. Connect the other end to a
suitable power outlet.
Turning the Machine On
Turn the power switch on. The machine will
begin to warm up after which the basic
screen is displayed.
3-2
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Accessing Menu Items
When you configure the machine, you do so by accessing a menu item and making
your setting from there. Each configuration instruction in this guide tells you to
access the menu item and provides a route map to direct you to that item. An
example of a route map and its significance is shown below.
.
System Menu/
Counter
This represents the control panel button to be pressed.
S or T
Press the up or down button until System Setting is displayed.
System Setting
Enter
S or T
Press the up or down button until Network Setting is displayed.
Press the up or down button until TCP/IP Setting is displayed.
Press the up or down button until IP Address is displayed.
Network Setting
Enter
S or T
TCP/IP Setting
Enter
S or T
IP Address
Enter
OPERATION GUIDE
3-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Network Settings
Registering the IP Address
Check the IP address with your network administrator before performing this setting.
This will only function if the DHCP setting is Off and the TCP/IP setting is On. Any
changes made to the network settings will become valid after you turn the power to
the machine off and then back on again.
To manually register the IP address.
1
Access IP Address.
System Menu/
Counter
S or T
System Setting
2
3
Use the numeric keys to enter each segment of the IP address in turn,
Enter
pressing X or [*.] to move between segments.
S or T
Press Enter on completion.
Network Setting
If you make an error in entering a portion of the IP address, press W to return to
the previous block of digits and re-enter the correct number.
Enter
S or T
4
TCP/IP Setting
Enter
S or T
IP Address
Enter
Registering the Subnet Mask
1
Access Subnet Mask.
System Menu/
Counter
S or T
System Setting
2
3
Use the numeric keys to enter each segment of the Subnet Mask in turn,
Enter
pressing X or [*.] to move between segments.
S or T
Press Enter on completion.
Network Setting
If you make an error in entering a portion of the Subnet Mask, press W to return
to the previous block of digits and re-enter the correct number.
Enter
S or T
4
TCP/IP Setting
Enter
S or T
Subnet Mask
Enter
3-4
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Registering the Default Gateway
.
1
Access Default Gateway.
System Menu/
Counter
S or T
2
3
Use the numeric keys to enter each segment of the Default Gateway in turn,
System Setting
pressing X or [*.] to move between segments.
Enter
Press Enter on completion.
S or T
If you make an error in entering a portion of the Default Gateway, press W to
return to the previous block of digits and re-enter the correct number.
Network Setting
Enter
4
When you complete all of the network setting, press right Select. The message
S or T
display returns to the basic screen.
TCP/IP Setting
Enter
S or T
Default Gateway
Enter
Date and Time Settings
Setting the Time Zone
You can also make this setting using Embedded Web Server. For details on
Embedded Web Server, refer to the Advanced Operation Guide.
1
Access Time Zone.
System Menu/
Counter
S or T
Date/Timer Set
2
3
Press S or T to select the time zone that you are in.
Enter
Press Enter. The message display shows Completed and returns to the Date/
S or T
Timer Set. screen.
Time Zone
4
Press right Select. The message display returns to the basic screen.
Enter
OPERATION GUIDE
3-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Summer Time Setting
You can also make this setting using embedded Web Server. For details on
embedded Web Server, refer to the Advanced Operation Guide.
.
1
Access Summer Time.
System Menu/
Counter
S or T
Date/Timer Set
2
3
Press S or T to select either On or Off.
Enter
Press Enter. The message display shows Completed and returns to the Date/
S or T
Timer Set. screen.
Summer Time
4
Press right Select. The message display returns to the basic screen.
Enter
Setting the Current Date and Time
You can also make this setting using embedded Web Server. For details on
Embedded Web Server, refer to the Advanced Operation Guide.
NOTE: Periodically check the time that is shown in the message display and adjust
as necessary to match the current time.
1
Access Year/Time.
System Menu/
Counter
S or T
Date/Timer Set
2
3
4
5
6
To set the date, for each field press S or T as many times as necessary to
Enter
display the correct value then press X to move to the next field.
S or T
When the date is correct, press Enter. The time setting screen
Year/Time
(hour:minute:second) is displayed.
Enter
To set the time, for each field press S or T as many times as necessary to
display the correct value then press X to move to the next field.
Press Enter. The message display shows Completed and returns to the Date/
Timer Set. screen.
Press right Select. The message display returns to the basic screen.
3-6
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Default Operation Mode
Use the following procedure to set the operation mode selected when the machine
is powered on. Modes available are Copy Operation, Send Operation or Status
Operation. It is recommended you select the most commonly used mode as the
default.
1
From System Menu/Counter press S or T to select Common Setting and
System Menu/
Counter
press Enter.
S or T
Common Setting
2
3
Press S or T to select Default Operat and press Enter.
Enter
S or T
Press S or T to select the default operation mode from among Status, Copy
Default Operat
or Send.
Enter
4
5
Press Enter. The message display shows Completed and returns to Common
Setting.
Press right Select. The message display returns to the basic screen.
OPERATION GUIDE
3-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Character Entry
To enter an e-mail address, etc., the characters are entered using the Numeric Keys.
To move the cursor, use the W, S, T, and X keys.
Keys Used for Entering Characters
3
4
2
1
Address Entry:
h_pttr@
ABC
Text
Cancel
13
7
9
12
11
5
6
10
8
1
2
3
Cursor — Characters are entered by the cursor. To delete a character, move
the cursor to the corresponding character and then press Stop/Clear.
Character Limit Icon — Indicates when the maximum number of characters
allowable has been entered.
Characters on page 3-9 for a list of the characters that can be entered using
each key.
4
5
Reset/Power Key — Press this to cancel the character entry procedure.
Left Select key — Press this to select the left item when selectable items are
displayed on the bottom line of the message display.
6
7
8
9
Right Select key — Press this to switch between character entry modes.
W Key - Press this to move the cursor in the message display to the left.
Back Key — Press this to go up one level on the current menu.
S Key — Press this to move the display cursor up.
10 T Key — Press this to move the cursor down.
11 Enter Key — Press this to register the currently entered characters.
12 X Key — Press this to move the cursor in the message display to the right.
13 Stop/Clear Key — Press this to delete the character at the cursor. If the cursor
is not on a character, the character to the left of the cursor will be deleted.
3-8
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Available Characters
The following characters types are available. Press right Select to switch between
types of characters.
Type
Available Characters
Alphabetic/
Symbol
Refer to List of Character Assignments below.
Text Æ ABC
Numeric
Text Æ 123
Symbol
Special characters, etc., can be entered from the Symbol List.
Text Æ Symbols
!
”
,
#
-
$
.
%
/
&
:
’
;
(
<
`
)
=
{
*
>
|
+
?
}
@
~
[
\
]
^
_
List of Character Assignments
The following characters can be entered using the numeric keys.
Key
Entry mode
Alphabetic/Symbol
Numeric
Available characters
. @ - _ / : ~ 1
1
Alphabetic/Symbol
Numeric
a b c A B C 2
2
Alphabetic/Symbol
Numeric
d e f D E F 3
3
Alphabetic/Symbol
Numeric
g h i G H I 4
4
Alphabetic/Symbol
Numeric
j k l J K L 5
5
Alphabetic/Symbol
Numeric
m n o M N O 6
6
Alphabetic/Symbol
Numeric
p q r s P Q R S 7
7
Alphabetic/Symbol
Numeric
t u v T U V 8
8
OPERATION GUIDE
3-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Key
Entry mode
Alphabetic/Symbol
Numeric
Available characters
w x y z W X Y Z 9
9
Alphabetic/Symbol
Numeric
. , - _ ’ ! ? (space) 0
0
Alphabetic/Symbol
Numeric
Switch between upper-/lowercase
* or . (decimal point)
#
Alphabetic/Symbol/
Numeric
Entering Characters
This section explains the procedure to enter characters using the key pad. This is
necessary for entering details such as an e-mail address and host name.
Each character is entered by pressing the associated key on the numeric keys as
Character Assignments on page 3-9. You can change between character types by
Once the required character is displayed, press a different key or press X to enter
the next character. To repeatedly enter the same character, press X to move the
cursor and then enter that character again.
Example
To enter [email protected]:
1
Press c 4 times. _ is displayed.
Press i. p is displayed.
2
3
4
5
6
7
8
9
Press j. t is displayed.
Press X. The cursor will move one space to the right.
Press j. t is displayed.
Press i 3 times. r is displayed.
Press c 2 times. @ is displayed.
Enter the rest of the characters in the same way, and press Enter.
Completed will appear and the message display returns to the basic screen.
3-10
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Selecting Message Language
You can select the language of the messages display by following the procedure in
the Advanced Operation Guide. You can optionally download messages in other
languages. Contact your dealer for information.
The following languages are available for selection:
English, Français, Deutsch, Italiano, Nederlands, Español, Português, and the
downloaded languages.
Other Settings
Various default settings can be adjusted to your preference in this machine. For
details on the adjustable default items and corresponding setting methods, refer to
the Advanced Operation Guide.
OPERATION GUIDE
3-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
3-12
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Basic Operation
Basic Copying Procedure
To change the default settings for the machine, refer to the Advanced Operation
Guide.
Turn the machine on. At the end of warm-up, the Start indicator will light.
1
2
Select from the copier’s various functions.
Press Paper Select to select the paper feed
location, and press Enter. The message
display returns to the basic screen.
3
4
5
If you select the MP Tray, you need to select
both the size and media type to be used.
Press Original Quality. The Original
Quality screen is displayed.
Press S or T to select the desired mode and press Enter. The message display
returns to the basic screen.
Mode
Description
Text+Photo (text and photo Select for originals containing a mixture of both
mode)
text and photographs.
Photo (photo mode)
Text (text mode)
Select for originals containing mostly photographs.
Select for originals containing mostly text.
OPERATION GUIDE
4-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
The copy exposure can be adjusted either
automatically or manually.
6
7
8
9
This machine is initially set for manual
exposure adjustment. Normally there will be
no need for you to adjust the copy exposure.
Enter the number of copies required. Up to
999 can be entered.
Open the original cover and place the
original face-down onto the platen against
the left rear corner of the platen. Close the
original cover.
Press Start. Copying begins immediately.
To cancel copying, press Stop/Clear. Refer
Completed copies are delivered to the
output tray.
4-2
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
BasicOperation
Canceling Copy
Press Stop/Clear. The Pausing Job List
screen will be displayed.
1
Press S or T to select the copying job to cancel.
Press left Select.
2
3
4
5
6
Cancel Job. Are you sure? is displayed. Press left Select.
Canceling is displayed and the copying is canceled.
The Pausing Job List screen is displayed.
If you want to cancel another job, repeat steps 2 through 5.
Press right Select. The Status Menu screen is displayed and processing of jobs is
resumed.
7
8
To enable copying again, press Copy. The
message display returns to the basic
screen.
OPERATION GUIDE
4-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Zoom Copies
It is possible to change the zoom ratio in order to make copies of an enlarged or
reduced size. The following modes are available for selecting the desired zoom ratio.
Mode
Description
Standard Zoom
Copies can be made at one of the fixed zoom ratios.
The following ratios are registered in the machine:
200 %, 141 % (A5 Æ A4), 129 % (Statement Æ Letter),
115 % (B5 Æ A4), 100 % (default setting), 90 % (Folio
Æ A4), 86 % (A4 Æ B5), 78 % (Legal Æ Letter), 70 %
(A4 Æ A5), 64 % (Letter Æ Statement), and 50 %.
Variable Zoom
The zoom ratio can be set to any 1 % increment
between 50 % and 200 %, as desired and shown
below.
50 %
200 %
Standard Zoom
Press Copy.
1
Press left Select.
2
Press S or T to select Standard Zoom.
Press Enter.
3
4
5
6
Press S or T to select the desired zoom ratio.
Press Enter. The message display shows Completed and returns to the basic
screen. The new zoom ratio is registered.
To start copying, place the original on the platen and press Start.
4-4
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
BasicOperation
Variable Zoom
Perform the following procedure to make settings for the Variable Zoom mode.
Press Copy.
1
Press left Select.
2
3
4
5
Press S or T to select Zoom Entry.
Press Enter.
Press S or T, as appropriate, to change the displayed zoom ratio to the desired
ratio.
Press Enter. The message display shows Completed and returns to the basic
screen. The new zoom ratio is registered.
6
To start copying, place the original on the platen and press Start.
OPERATION GUIDE
4-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Collate Mode
Multiple originals can be collated.
To use the collate mode turn the continuous
scan function on. For details, refer to the
Advanced Operation Guide.
Originals
Copies
Press Copy.
1
2
Press Function.
Press S or T to select Collate.
Press Enter.
3
4
5
6
Press S or T to select On.
Press Enter. The message display shows Completed and returns to the Function
screen.
Press right Select.
7
8
9
Enter the desired number of copies.
Place the original on the platen and press Start. Scanning of the first original will
start.
Replace the first original with the next one and press Start. Scanning will start.
Once all of the originals have been scanned, press right Select (End Scan). Copying
starts. Scanned pages are printed.
10
4-6
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
BasicOperation
Print Override Mode
The print override mode temporarily stops processing of the current job to enable
copies of a more urgent job to be made.
After the print override processing is completed, the interrupted job will be resumed.
Press Function.
1
Press S or T to select Print Override.
Press Enter.
2
3
4
5
6
Press S or T to select On.
Press Enter.
Press right Select. The message display shows Completed and returns to the
Function screen.
Enter the desired number of copies.
7
8
Place the original on the platen and press Start. Completed copies are delivered to
the output tray.
When the interruption is completed, perform steps 1 through 4 to switch Print
Override mode Off.
9
OPERATION GUIDE
4-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Low Power Mode
The machine has a Low Power Timer that is used to conserve power when the
machine is not in operation. You can adjust the length of time (between 1 minute and
240 minutes) the machine waits before entering low power mode. The factory default
time is 5 minutes. For details, refer to the Advanced Operation Guide.
The machine wakes from low power mode whenever any one of the keys on the
operator panel is pressed, an original is set from document processor, the cassettes
or MP tray are opened or closed, or a print job is received.
Auto Sleep
The machine has an Auto Sleep Timer that is used to conserve power when the
machine is not in operation. You can adjust the length of time (between 1 minute and
240 minutes from the last activity) the machine waits before auto sleep is activated.
The factory default time is 30 minutes. For details, refer to the Advanced Operation
Guide.
To engage auto sleep manually, press and hold Reset/Power for at least three
seconds. The auto sleep mode will engage immediately. The machine wakes from
auto sleep mode automatically if a print job is received or whenever you press Reset/
Power.
4-8
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
BasicOperation
Basic Scanning Procedure
You can scan documents and send them to e-mail addresses or a folder. The folder
can be on a PC or FTP server. The recipients address can be entered from an
internal address book, external address book (LDAP) or using a one-touch key.
Refer to the Advanced Operation Guide for the registration method to an address
book and one-touch keys.
The scanner can be operated from a PC connected locally through a USB
connection using a TWAIN driver contained in attached CD-ROM.
The format of the scanned image is selectable. The initial format is PDF.
Scan to E-mail
The following procedure explains the method for attaching scan data to e-mail for
transmission.
Scan to e-mail works within the following environments:
•
•
•
It must have a network environment in which this machine can connect to a
mail server. It is recommended that the machine be used in an environment in
which it can connect to the mail server at any time over a LAN.
The SMTP settings must be completed. Use Embedded Web Server, to register
the IP address and the host name of the SMTP server. Refer to the Advanced
Operation Guide.
There may be a times where transmission is not possible due to the size of
each e-mail item.
Recipient Entry from the Operation Panel
An e-mail address is entered directly from the operation panel, and the procedure to
transmit is explained. Refer to Recipient Selection from Address Book on page 4-10
for the procedure for using the Address Book and to the Advanced Operation Guide
for information on registering an address in the address book.
Press Send.
1
Press W.
2
OPERATION GUIDE
4-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Press S or T to select E-mail and press Enter.
3
4
information on entering characters.
Once you have completed entering the address, press Enter.
5
6
To enter a subject and/or message, press right Select.
If you do not need subject and message, go directly to step 10 without pressing right
Select.
Enter the subject for the e-mail when the subject input screen is displayed (60
characters maximum).
Press Enter. Enter the desired message for the e-mail when the message input
screen is displayed (60 characters maximum).
7
8
9
Press Enter. The Completed screen is displayed, and the message display returns
to the basic screen.
Place the original on the platen and press Start.
The scanned image is sent to the destination e-mail address as an attachment. The
image (PDF) is named as doc plus the date and time at which it was transmitted. For
example, a PDF attachment named doc04252005101530.pdf is a file sent on 2005
April 25th at 10:15:30.
Recipient Selection from Address Book
Press Send.
1
Press X.
2
Press S or T to select Address Book or Ext Address Book.
3
Press Enter.
4
Press S or T to select a desired name.
5
4-10
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
BasicOperation
Press Enter.
6
7
8
Press S or T to select E-mail.
Press Enter. Completed will appear and the message display returns to the basic
screen.
Place the original on the platen and press Start.
9
The scanned image is sent to the destination e-mail address as an attachment. The
image (PDF) is named as doc plus the date and time at which it was transmitted. For
example, a pdf attachment named doc04252005101530.pdf is a file sent on 2005
April 25th at 10:15:30.
Scan to Folder
The following procedure explains the method for scanning data to a folder on a PC
or FTP server. The scanned data can only be sent to one folder at a time. Refer to
Recipient Selection from Address Book on page 4-10 for the procedure for using the
Address Book and to the Advanced Operation Guide for information on registering
an address in the address book.
Entering a Recipient Address from the Operation Panel
Press Send.
1
Press W.
2
Press S or T to select Folder.
3
For transmission to a shared PC folder, press the S or T to select SMB.
4
For transmission to a shared FTP folder, press the S or T to select FTP.
Press Enter.
5
Enter the host name or the IP address of the host and press Enter.
6
Enter the path name where the file is to be stored and press Enter.
7
OPERATION GUIDE
4-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Enter the login user name and press Enter.
8
If you also have a domain name, enter it after the user name.
Enter the login password and press Enter.
9
10
11
Press Enter.
Place the original on the platen and press Start.
The scanned image is sent to the destination e-mail address as an attachment. The
image (PDF) is named as doc plus the date and time at which it was transmitted. For
example, a pdf attachment named doc04252005101530.pdf is a file sent on 2005
April 25th at 10:15:30.
Recipient Selection from Address Book
Press Send.
1
Press X.
2
Press S or T to select a desired name.
3
Press Enter.
4
Press S or T to select the folder.
5
Press Enter. Login User Name input screen is displayed.
6
Enter the login user name and press Enter. If you also have a domain name, enter
it after the user name.
7
Enter the login password and press Enter.
8
4-12
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
BasicOperation
Place the original on the platen and press Start.
9
The scanned image is sent to the destination e-mail address as an attachment. The
image (PDF) is named as doc plus the date and time at which it was transmitted. For
example, a pdf attachment named doc04252005101530.pdf is a file sent on 2005
April 25th at 10:15:30.
Recipient Selection from One-Touch Keys
Frequently used recipients can be registered into the one-touch keys. If two or more
one-touch keys are chosen a simultaneous transmission can take place. Refer to the
Advanced Operation Guide for the registration procedure for the one-touch keys.
Press Send.
1
Press the one-touch key on which the destination is registered.
2
Place the original on the platen and press Start.
3
The scanned image is sent to the destination e-mail address as an attachment. The
image (PDF) is named as doc plus the date and time at which it was transmitted. For
example, a pdf attachment named doc04252005101530.pdf is a file sent on 2005
April 25th at 10:15:30.
Scan with TWAIN Driver
Be sure that you connect your PC with the machine using the USB cable and install
the TWAIN Driver. The scan can be carried out from any TWAIN compatible
application program. Refer to Advanced Operation Guide for the installation
procedure and the usage of TWAIN Driver.
Selecting Color Scan Mode
The following color modes are available for scanning:
Mode
Description
Full Color
The original will be scanned in full color. The scanning
exposure will be set to Manual.
Grayscale
The shading of the original will be reproduced. The scanning
exposure will be set to Manual.
Monochrome
The original will be scanned in monochrome. The resulting file
size for the scan data will be smaller in comparison with the
other color modes.
Refer to the Advanced Operation Guide.
OPERATION GUIDE
4-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Basic Printing Procedure
Be sure that the machine’s printer cable or network cable and the power cord are
properly connected.
Installing the Printer Driver
To use the printer function, the printer driver must be installed. For information on
how to install the printer driver software, refer to the KM Driver
Operation Guide.
Printing from Application Software
Be sure that paper of the size specified for the document in the application is in the
machine.
1
Select Print from the File menu. The Print dialog box is displayed.
2
Choose this machine from the printer names drop-down list.
3
Specify the number of copies to print in Number of copies and any other options
you want to use. For details, refer to the KX Driver Operation Guide.
4
Click the OK button.
5
4-14
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Maintenance
Cleaning the Machine
CAUTION: For safety purposes, always remove the power cord from the outlet
when performing cleaning.
Always use a soft cloth dampened with alcohol or mild detergent to clean the
machine.
Open the original cover and wipe the platen
and the original cover, as shown in the
illustration.
If the optional document processor is
installed in your machine, open the
document processor and wipe the gray
portion, as shown in the illustration.
If copies appear soiled while using the
optional document processor the slit glass
is dirty.
Toner Container Replacement
If Replace Toner appears on the message display, replace the toner container and
clean the charger and registration roller. Refer to Cleaning the Charger and the
Online Help Messages
When Replace Toner is displayed, press left Select (Help) to display the procedure
to replace the toner container.
Press S to display the next step or press T to display the previous step.
Press Enter to exit the online help message display.
OPERATION GUIDE
5-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Replacing Toner Container
Open the top cover.
1
Open the front cover.
2
Lift the process unit, together with the toner
container, out of the machine and place it on
a clean, level surface.
3
Do not stand the process unit on end and
never expose the drum to normal lighting for
more than five minutes.
Pull the lock lever towards to the UNLOCK
position then pull the toner container release
lever to the right.
4
Gently remove the old toner container. Put it
in the supplied plastic bag and dispose of it
according to local rules and regulations.
5
CAUTION: Do not burn or open the toner container.
5-2
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Shake the new toner container horizontally
5 or 6 times to distributed the toner inside.
6
7
8
Remove the orange protective seal.
Align the knob on the left side of the
container with the groove in the process unit
and insert it. Push on the PUSH HERE
marks until the container clicks into place.
Push the lock lever back into its locked
position (away from you).
9
Clean the charge and registration roller.
Refer to Cleaning the Charger and the
OPERATION GUIDE
5-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Cleaning the Charger and the Registration Roller
Slide the charger cleaner knob backwards
and forwards 2 to 3 times, then return it to
1
the CLEANER HOME POSITION.
If the charger cleaner is not properly
restored a black band will appear on copies.
Use the cleaning cloth supplied to clean
2
paper dust and dirt accumulated on the
metal registration roller (A) inside the
machine.
(B)
Do not touch the black transfer roller (B).
(A)
After cleaning, align the pins (C) on both
sides of the process unit with the guides
inside the machine, and carefully slide the
process unit into the machine until in stops.
3
(C)
(C)
Close the front cover.
Close the top cover.
4
5
6
When the toner container is replaced, reset the toner gauge. For details, refer to the
Advanced Operation Guide.
5-4
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Reinstalling the Transport Pin
Follow the instructions below to reinstall the transport pin before moving the machine
1
Access Transport mode.
System Menu/
Counter
S or T
Service Setting
2
3
4
5
Press left Select on the operation panel.
Turn the power switch off.
Enter
S or T
Transport Mode
Open the top and front cover.
Remove the transport pin.
Enter
6
7
Fasten the transport pin as shown.
Close the front and top cover.
OPERATION GUIDE
5-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
5-6
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Troubleshooting
General Guidelines
The table below provides basic solutions for problems you may encounter with the
machine. We suggest you consult this table to troubleshoot the problems before
calling for service.
Symptom
Check Item
Corrective Action
Reference
Nothing lights on the
Is the power plug connected to Connect the plug to an AC
—
operation panel when an AC outlet?
the power switch is
outlet.
turned on.
No copies delivered
after Start is
pressed.
Is there some indication of the
Check the appropriate
trouble on the operation panel? response to that indication and
perform the corresponding
procedure.
Blank copies.
Light copies.
Were the originals placed
correctly?
When placing originals on the
platen, place them face-down.
When setting originals in the
optional document processor,
place them face-up.
—
Is the copier in the Auto
Exposure Adjustment mode?
Perform the Auto Exposure
Adjustment procedure.
—
Is the copier in either the
Photo, Text+Photo, or Text
mode?
Adjust the exposure to the
correct level.
Is the copier in the EcoPrint
mode?
Select an image quality mode
other than the EcoPrint mode.
—
Is the Add Toner indicator lit?
Is the copy paper damp?
Replace the toner container.
Replace the copy paper with
new paper.
Dark copies.
Dirty copies.
Is the copier in the Auto
Exposure Adjustment mode?
Perform the Auto Exposure
Adjustment procedure.
—
Is the copier in either the
Photo, Text +Photo, or Text
mode?
Adjust the exposure to the
correct level.
Is the platen or the optional
document processor dirty?
Clean the platen and/or the
optional document processor.
Clean the charger.
OPERATION GUIDE
6-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Symptom
Check Item
Corrective Action
Reference
Black or white bands Is the charger cleaner in the
Remove the process unit and
on copies.
CLEANER HOME POSITION? return the charger cleaner to
its home position.
If you are using the optional
document processor, is the slit
glass dirty?
Clean the slit glass.
It is also possible to use the
Scan Noise Reduction function
to make black lines on the
copies less apparent. For
details, refer to the Advanced
Operation Guide.
Skewed copies.
Were the originals placed
correctly?
When placing originals on the
platen, align them against the
upper left corner.
When placing originals in the
optional document processor,
align the width guides securely
before inserting the originals.
—
Frequent paper jams. Is the paper loaded properly in Load the paper properly.
the cassette?
—
Is the paper curled, folded or
wrinkled?
Replace the paper with new
paper.
Is there any jammed paper or
loose scraps of paper
Carry out the appropriate
procedure to remove the
remaining inside the machine? paper.
Does the registered paper size Be sure the registered paper
match the size you are actually size matches the size you are
—
using?
actually using.
The Add Toner
Did you shake the new toner
container enough?
Shake the toner container
horizontally 5 or 6 times.
indicator doesn’t go
out after replacing
the toner container.
6-2
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Maintenance and Error Messages
When any of the following messages appears on the message display, perform the
procedure provided below.
Message
Procedure
Reference
Add paper to (paper source). The paper has run out. Add paper to the paper source;
Casset. 1, Casset. 2 (with option paper feeder) or MP
Tray.
The cassette is not properly closed. Be sure the cassette
is closed securely.
Close Document Processor.
The document processor is still open even though an
original has been inserted.
—
Close the document processor.
Close Document Processor
Cover.
The left cover to the document processor is open.
Close the cover securely.
—
—
Close Top Cover.
The top cover or the front cover is open.
Close the covers securely.
Enter address.
Enter destination.
Enter file name.
Enter host name.
Enter path.
Enter was pressed without entering a recipient. Enter the
address.
—
—
—
—
—
Start was pressed without entering a recipient. Enter the
recipient.
Enter was pressed without entering a file name. Enter
the file name.
Enter was pressed without entering a host name. Enter
the host name.
Enter was pressed without entering a PC folder path or
an FTP network path. Enter the PC folder path or FTP
network path.
Entry error.
An invalid character was entered.
—
—
Enter correctly.
Error occurred.
Call service person.
Turn the power switch off and then back on again. If this
message still remains, make a note of the number that is
displayed together with the letter C. Then, turn the power
switch off, and contact your service representative or
authorized service center.
C####
Error occurred.
Power switch turn off and on
again.
C####
Exceeded max count. Job is
canceled.
When job accounting is enabled and the current job will
exceed the account limit, press right Select to cancel the
print job.
—
Illegal account. Job is
canceled.
When job accounting is enabled and the selected
account is invalid, press right Select to cancel the job.
—
—
Illegal user ID. Job is
canceled.
When user login is enabled and the wrong user ID or
password is entered, press right Select to cancel the job.
OPERATION GUIDE
6-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Message
Procedure
Reference
Insert Cassette1.
The paper feeder was selected, but cassette 1 is not
installed properly.
—
Push the upper cassette securely into the machine.
Insufficient memory.
Unable to start job.
Memory shortage occurred during processing of other
jobs.
—
KPDL error.
Job is canceled.
Current print processing cannot continue.
Advanced
Operation
Guide
If you want to cancel printing, press right Select. If Auto
Error Clear is set to On, printing will be automatically
resumed after a preset period of time.
####
Load paper in Cassette1.
Size # Type #
There is no paper in the indicated cassette. Press right
Select.
Load paper in Cassette2.
Size # Type #
If you have loaded paper in the cassette, select Print
(Continue) and press Enter.
Load paper in
To switch to another paper feed location, select Paper
select and press Enter.
MP Tray.
Size # Type #
The available paper feed locations will be displayed.
Select the desired paper feed location and press Enter.
Memory overflow.
The machine’s memory is full. Press left Select to cancel
Advanced
Operation
Guide
Part of the job end is printed. the copying procedure. Pressing right Select after a part
of the job being processed is printed will end the job.
Insert fewer originals and try to copy again.
To add expansion memory, contact your service
representative or authorized service center.
Paper Jam at Cassette1.
Paper Jam at Cassette2.
Paper Jam at MP Tray.
A paper jam has occurred. Press left Select to display
the online help messages and remove the jammed
paper.
Paper Jam at Document
Processor.
Paper Jam in Printer.
Place original and press Start The machine will attempt to make copies from any
—
—
key.
originals that remain uncopied.
Reposition the original on the platen or in the document
feed tray and try to copy again.
Print overrun.
The data transferred to the machine was too complex to
print on a page.
This page isn't complete.
To continue printing, press right Select. To cancel
printing, press left Select.
Remove original from
Document Processor.
This appears if there is a document in the document
processor when the power is turned on. It also appears
when the paper has jammed while being fed from the
document processor because of the way it was placed.
Remove all the document pages inside the document
processor, and set them again correctly.
6-4
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Message
Replace Toner.
Procedure
Reference
Toner has run out so further copying or printing is
impossible.
Replace the toner container using a new toner kit.
Scan memory overflow. Job
is canceled.
Press right Select to cancel the copying procedure.
The total amount of data received by the machine
exceeds the machine’s internal memory. To verify the
current amount of memory, print out a Status Page.
Advanced
Operation
Guide
To cancel printing, press right Select. If Auto Error Clear
is set to On, printing will be automatically resumed after a
preset period of time.
Lower the image quality.
Send error.
####
An error has occurred during transmission. The possible
error codes and their descriptions are as follows.
1101: The server name of the SMTP server is not set
correctly or the host name is incorrect when sending
scan data to an FTP server. Use Embedded Web Server
and register the SMTP server name and the host name
correctly.
Advanced
Operation
Guide
1102: The login user name is incorrect or the domain
name has not been entered. Enter login name, domain
name and password correctly.
1103: The network path name is incorrect or you do not
have access to the folder specified. Use Embedded
Web Server and register the path name correctly.
Advanced
Operation
Guide
1104: No recipient address. Enter e-mail address
correctly.
1105: E-mail - The SMTP protocol setting is turned off.
Use Embedded Web Server and turn on the SMTP
protocol setting.
Advanced
Operation
Guide
Scan to PC (SMB) - SMB setting is turned off. Use
Embedded Web Server and turn on the SMB setting.
Scan to PC (FTP) - FTP setting is turned off. Use
Embedded Web Server and turn on the FTP setting.
1106: The sender address setting under e-mail: SMTP is
not registered. Use Embedded Web Server and register
the sender address.
Advanced
Operation
Guide
210#: The network cable is disconnected or the hub that
it is connected to is not operating properly. Check the
cable connection or the hub.
The server name or the host name of the SMTP server is
not set correctly. Use Embedded Web Server and register
the SMTP server name and the host name correctly.
Advanced
Operation
Guide
220#: The network cable has become disconnected
during transmission or the hub that it is connected to has
stopped operating. Check the cable connection or the
hub.
OPERATION GUIDE
6-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Message
Procedure
Reference
Send error.
####
3101: SMTP Authentication error. Consult with your
network administrator to verify that the Login Account
Name and Login Password required for SMTP
Authentication are correct.
Advanced
Operation
Guide
The SMTP server or FTP server is not operating
properly. Check with your network administrator.
This key is not registered.
Toner low.
An unregistered one-touch key was chosen. Select the
correct one-touch key.
—
—
Toner is running low. Replace the toner container using a
new toner kit as soon as possible.
Waste toner near full.
Remove the process unit from the machine. Gently
shake the process unit horizontally a few times. Reinstall
it into the machine. The machine will stop printing soon,
contact your service representative or authorized service
center.
Waiting to scan.
The memory to execute the job is insufficient. The job will
be automatically resumed, after the memory capacity to
execute is available. If you want to cancel the job, press
left Select.
—
Wrong account ID.
Wrong password.
Wrong user ID.
When job accounting is enabled, the account ID was
already registered. Enter the correct account ID.
Advanced
Operation
Guide
When user login is enabled, an incorrect job accounting
password was entered. Enter the correct password.
Advanced
Operation
Guide
When the user management setup (User Login) is
enabled an incorrect user ID was entered. Enter the
correct user ID.
Advanced
Operation
Guide
6-6
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Paper Jam
If a paper jam occurs, a message will be displayed about the jam and copying or
printing will stop.
Jam Location Indicators
Indicator
Meaning
Reference
Original jam in the optional document
processor.
1
2
Paper jam inside the machine
Paper jam in the MP tray.
3
4
5
Paper jam in the upper cassette.
WARNING: High voltage is present in the charger section. Take sufficient care
when working in this area, as there is a danger of electrical shock.
CAUTION: The fixing unit is extremely hot. Take care when working in this area.
Online Help Messages
When Paper Jam is displayed, press left Select (Help) to display the procedure to
clear the jam.
Press S to display the next step or press T to display the previous step.
Press Enter to exit the online help message display.
MP Tray and Inside Machine
Remove any prints on the output tray before performing this procedure.
Open the top cover.
1
OPERATION GUIDE
6-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Open the front cover.
2
3
4
5
Take the process unit out of the machine.
If the leading edge of the jammed paper is
visible, pull it out towards you.
If the paper is not visible, perform the
Cassette procedure.
If the paper has been fed to the rear of the
machine but the leading edge is not visible,
perform the Face-up Tray procedure.
Replace the process unit by aligning the
pins on both sides with the guides inside the
machine, and slide it into the machine until
it stops.
Close the front cover.
Close the top cover.
6
7
6-8
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Cassette
Pull out the cassette that is in use.
1
2
3
Remove the jammed paper.
If a paper jam occurs in the optional paper
feeder, the procedure is the same as for the
cassette.
Push the cassette back in securely. The
misfeed indications will disappear.
Face-up Tray
Open the rear cover.
1
Remove the jammed paper.
2
CAUTION: The fixing unit is extremely
hot. Take care when working in this
area.
OPERATION GUIDE
6-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Close the rear cover.
3
4
Open and then close the top cover. The jam
indications will disappear.
Optional Document Processor
Remove all of the originals from the
document feed tray.
1
Open the left cover of the document
processor.
2
Remove the jammed original.
3
If the original is caught in the rollers or
difficult to remove, proceed to the next step.
6-10
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Open the document processor.
4
5
Remove the jammed original.
Close the document processor.
Place the originals.
6
7
OPERATION GUIDE
6-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
6-12
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Specifications
NOTE: Specifications are subject to change without notice.
Main Body
Item
Printing system
Specification
Electro-photographic
Originals
Sheets of paper, books and 3-dimensional objects
Copy sizes
Cassette
A4, A5, ISO B5, JIS B5, Folio, 16K, 8 1/2 × 14 inches
(Legal), 8 1/2 × 11 inches (Letter), 7 1/4 × 10 1/2
inches (Executive), and 8 1/2 × 13 inches (Oficio II)
MP tray
3.15 to 8.50 inches × 5.83 to 14.02 inches
80 to 216 mm × 148 to 356 mm
Print margin loss
0.5 to 5.5 mm
Paper
Refer to Appendix in Advanced Operation Guide.
Paper feed capacity
Paper cassettes:
MP tray:
250 sheets (80 g/m²)
50 sheets (80 g/m²)
25 sheets (120 g/m²)
10 sheets (160 g/m²)
1 sheet (Transparency)
Stacking capacity
Output tray:
Approx. 150 sheets (80 g/m²)
Face-up tray:
Approx. 30 sheets (80 g/m²)
1 sheet (special paper)
Warm-up time
At room temperature of 73.4 °F/23 °C, humidity
60 %RH:
Recovery from low
power mode:
10 sec. or less
Recovery from sleep
mode:
15 sec. or less
OPERATION GUIDE
7-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Item
Specification
Memory
Standard model
Option memory
Ambient conditions
Temperature
Humidity
96 MB (64 MB fixed and 32 MB detachable)
Up to 256 MB to replace 32 MB
10 to 32.5 °C
20 to 80 %RH
Altitude
Maximum 2,000 m (6,500 feet)
1,500 lux or less
Illumination
Power source
120 V AC, 60 Hz, 7.8 A
220 to 240 V AC, 50/60 Hz, 4.0 A
Dimensions (W) × (D) × (H)
19 9/16 × 16 5/8 × 15 3/16 inches
496 × 421 × 385 mm
Weight (without toner
container)
Approx. 32 lbs.
Approx. 14.5 kg
Noise emission
70 dB(A)
Required space (W) × (D)
19 9/16 × 29 3/16 inches
496 × 740 mm
Copying Functions
Item
Copying speed
Specification
Platen (1:1)
8 1/2 × 11 inches (Letter)/A4: 18 copies/min.
A5: 10 copies/min.
8 1/2 × 14 inches (Legal): 15 copies/min.
Document Processor
(1:1)
8 1/2 × 11 inches (Letter)/A4: 18 copies/min.
First copy
Resolution
Scanning and Printing
Approx. 9.5 sec. (1:1, 8 1/2 × 11 inches (Letter)/A4)
600 × 600 dpi
Continuous copying
Zoom ratios
1 to 999 sheets
50, 64, 70, 78, 86, 90, 100, 115, 129, 141, and 200 %
Any 1 % increment between 50 and 200 %
7-2
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Printing Functions
Item
Printing speed
Specification
8 1/2 × 11 inches (Letter)/A4: 18 copies/min.
A5: 10 copies/min.
8 1/2 × 14 inches (Legal): 15 copies/min.
First print
8 1/2 × 11 inches (Letter)/A4: Approx. 8 sec.
300, 600 dpi, and Fast 1200
Resolution
Compatible operation system Microsoft Windows 95/98/Me
Microsoft Windows NT 4.x/2000/XP
Apple Macintosh OS 9.x/OS X 10.x
UNIX
Host Interface
Parallel: 1 port (IEEE1284)
USB: 1 port (Hi-speed USB)
Ethernet: 1 port (10BASE-T/100BASE-TX)
Emulations
Line printer, IBM proprinter, DIABLO 630, EPSON LQ-
850, PCL6, and KPDL
Scanning Functions
Item
Specification
Scanning Speed
Monochrome: 18 scan/min.
Full Color or Grayscale: 4.8 scan/min.
1:1 - 8 1/2 x 11 inches (Letter)/A4, 200 dpi
†
200 x 100, 200 x 400, 200, 300, 400, and 600 dpi
Resolution
Color mode
Full Color: 8 bit/dot (each color)
Grayscale: 8 bit/dot
Monochrome: 1 bit/dot
File format
PDF, TIFF (Only monochrome mode), JPEG (Only full
color and grayscale modes)
Zoom ratios
100 % and Auto
Host Interface
Ethernet: 1 port (10BASE-T/100BASE-TX)
USB (TWAIN): 1 port (Hi-speed USB)
†.
The maximum resolution using full color or gray scale modes is 300 dpi. To scan in full
color or gray scale with 400 dpi or 600 dpi resolution, expansion of the internal
memory is required. Refer to the Advanced Operator Guide.
OPERATION GUIDE
7-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Document Processor (Option)
Item
Specification
Original feed system
Originals
Automatic feeding
Sheets of paper
Original sizes
Maximum: 8 1/2 × 14 inches (Legal) and Folio
Minimum: 5 1/2 × 8 1/2 inches (Statement) and A5R
Original paper weight
50 to 120 g/m²
Maximum number of
originals
50 (50 to 80 g/m²)
Dimensions (W) × (D) × (H)
17 15/16 × 13 1/16 × 3 11/16 inches
455 × 331 × 93 mm
Weight
Approx. 5 lbs.
Approx. 2.3 kg
Paper Feeder (Option)
Item
Specification
Paper feed capacity
Paper sizes
250 sheets (80 g/m²)
A4, A5, ISO B5, JIS B5, Folio, 16K, 8 1/2 × 14 inches
(Legal), 8 1/2 × 11 inches (Letter), 7 1/4 × 10 1/2
inches (Executive), and 8 1/2 × 13 inches (Oficio II)
Paper
Refer to Appendix in Advanced Operation Guide.
Dimensions (W) × (D) × (H)
14 7/8 × 14 3/4 × 3 1/8 inches
378 × 375 × 79 mm
Weight
Approx. 4.5 lbs.
Approx. 2.0 kg
Environmental Specifications
Item
Specification
Duplex copying
Paper feed
Not available
Recycled paper made from 100% recycled pulp may
be used with this product.
7-4
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
Low power mode 4-8
A
Application software 4-14
M
Maintenance 5-1
C
Maintenance messages 6-3
Message display 1-5
MP tray 2-3
Canceling copy 4-3
Cassette 2-1
Caution labels Legal and Safety-xi
Character assignments 3-9
Charger 5-4
N
Charger cleaner knob 5-4
Cleaner home position 5-4
Cleaning 5-1
Names of machine parts 1-1
Network (TCP/IP) settings 3-4
Network cable 3-1
Collate mode 4-6
Color scan mode 4-13
O
Connecting the cables 3-1
One-Touch Key 4-13
Operation panel 1-4
Other settings 3-11
Copying 4-1
D
P
Date and time 3-6
Default gateway 3-5
Default operation mode 3-7
Paper jam 6-7
Document processor 6-10
Face-up tray 6-9
in a cassette 6-9
E
MP Tray and inside machine 6-7
Paper width guide 2-2
Photo mode 4-1
Entering characters 3-8
Error messages 6-3
Power cord 3-2
F
Power switch 3-2
Face-up tray 2-5
Precautions for use Legal and Safety-xiii
Print Override mode 4-7
Printer cable 3-1
K
Printer driver 4-14
KX printer driver 4-14
Printing 4-14
L
R
Language selection 3-11
Registration roller 5-4
Loading paper 2-1
Release button 2-2
OPERATION GUIDE
INDEX-1
Download from Www.Somanuals.com. All Manuals Search And Download.
S
T
Scan to E-mail 4-9
Text mode 4-1
Scan to Folder 4-11
Scanning 4-9
Text+Photo mode 4-1
Time zone 3-5
Sleep mode 4-8
Toner container 5-1
Transfer roller 5-4
TWAIN 4-13
Specifications 7-1
Copying Functions 7-2
Document Processor (Option) 7-4
Environmental Specifications 7-4
Main Body 7-1
V
Paper Feeder (Option) 7-4
Printing Functions 7-3
Scanning Functions 7-3
Standard zoom 4-4
Z
Stopper extension lock 2-3
Subnet mask 3-4
Zoom copy 4-4
Summer time 3-6
INDEX-2
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
DIRECTIVE 2002/96/CE ON THE TREATMENT, COLLECTION, RECYCLING AND
DISPOSAL OF ELECTRIC AND ELECTRONIC DEVICES AND THEIR COMPONENTS
INFORMATION
1. FOR COUNTRIES IN THE EUROPEAN UNION (EU)
The disposal of electric and electronic devices as solid urban waste is strictly prohibited: it must be collected separately.
The dumping of these devices at unequipped and unauthorized places may have hazardous effects on health and the
environment.
Offenders will be subjected to the penalties and measures laid down by the law.
TO DISPOSE OF OUR DEVICES CORRECTLY:
a) Contact the Local Authorities, who will give you the practical information you need and the instructions for handling the
waste correctly, for example: location and times of the waste collection centres, etc.
b) When you purchase a new device of ours, give a used device similar to the one purchased to our dealer for disposal.
The crossed dustbin symbol on the device means that:
- when it to be disposed of, the device is to be taken to the equipped waste collection centres and is to be
handled separately from urban waste;
- The producer guarantees the activation of the treatment, collection, recycling and disposal procedures in
accordance with Directive 2002/96/CE (and subsequent amendments).
2. FOR OTHER COUNTRIES (NOT IN THE EU)
The treatment, collection, recycling and disposal of electric and electronic devices will be carried out in accordance with the
laws in force in the country in question.
Download from Www.Somanuals.com. All Manuals Search And Download.
|