| 	
		 2007.07.30   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				IMPORTANT: READ ALL INCLUDED SAFETY INFORMATION BEFORE USING O ROKR PRO.   
					INTRODUCTION   
					O ROKR Pro gives you a mobile, wearable link to your Bluetooth enabled mobile phone with no cords or wires to get in the way.   
					With the ability to stream digital music, O ROKR Pro works like wireless stereo headphones and even lets you control the music   
					wirelessly. Just use a mobile phone with music streaming capability or add a Bluetooth adapter to your portable music player.   
					Make sure the Bluetooth enabled phone or adapter has Bluetooth A2DP (for wireless audio streaming) and Bluetooth AVRCP   
					(for wireless control of music). These Bluetooth technologies allow the device to work with O ROKR Pro.   
					Indicator Light   
					3 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				CHARGING THE BATTERY   
					Charge O ROKR Pro for 3 hours before using it the first time. (For normal recharging, a fast charge of 1.5 hours will charge the battery   
					to 80% capacity; 3 hours will provide a full charge.) When fully charged, O ROKR Pro provides over 100 hours of standby time or 5 hours   
					of talk time. If O ROKR Pro hasn’t been used for a while, the battery may need recharging. When the battery is low, you will hear warning   
					tones every 60 seconds.   
					O ROKR Pro comes with a wall charger. With the optional USB cable (sold separately), you can charge O ROKR Pro by plugging it into   
					any computer USB port. That way, you can leave the wall charger at home and use the USB cable at the office, or anywhere you have   
					access to a computer.   
					TO CHARGE O ROKR PRO   
					1. Plug the wall charger into an electrical outlet.   
					2. Plug the charger cable into the eyewear. Be sure to align the plug correctly. If the plug will not go in, try flipping it over.   
					3. When the indicator light is solid green, charging is complete.   
					WHEN CHARGING THE BATTERY, NOTE THE FOLLOWING:   
					• Battery life depends on many things, including volume level and external temperature.   
					• The more time you spend talking on the phone or listening to music, the less standby time your rechargeable battery has with   
					the remaining charge.   
					• Storing O ROKR Pro fully charged in high temperature conditions may permanently reduce the life of the internal battery.   
					• Low temperature conditions may temporarily shorten battery life.   
					• The internal Lithium Ion Polymer battery is self-contained and cannot be replaced by the user.   
					• Any device with a rechargeable battery must be disposed of properly and may need to be recycled. Contact your local   
					recycling center for proper disposal methods.   
					• WARNING: Never dispose of batteries in a fire. Doing so may cause them to explode.   
					4 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				PAIRING WITH YOUR PHONE AND/OR MUSIC DEVICE   
					Before you can use O ROKR Pro to make a call, it must be paired with your Bluetooth enabled phone and/or music device. This is a one-   
					time task. Once pairing is complete, O ROKR Pro automatically connects to your phone and/or music device whenever you turn O ROKR   
					Pro on.   
					EASY PAIRING O ROKR PRO   
					1. Power on the headset by pressing the Call   
					indicate the headset is in pairing mode.   
					button. After a few moments, the indicator light will be steadily lit in red to   
					If the headset does not enter pairing mode, see section labeled “TO MANUALLY PLACE O ROKR PRO IN PAIRING MODE” below.   
					TO PAIR O ROKR PRO WITH YOUR PHONE   
					2. On your phone, be sure the Bluetooth feature is turned on.   
					For more information, consult the user’s guide that came with your phone.   
					3. Have your phone search for Bluetooth devices.   
					On most Motorola phones, this function can be found under   
					Settings > Connection > Bluetooth Link > Handsfree > Look for Devices   
					For more information, consult the user’s guide that came with your phone.   
					4. Select “Oakley O ROKR PRO” from the list of discovered devices on your phone.   
					Follow the onscreen prompts to confirm your selection.   
					5. When prompted by the phone, enter the passkey “0000” (four zeroes).   
					Follow the onscreen prompts to confirm your selection.   
					When pairing is successful, the indicator light flashes green ten times and O ROKR Pro turns on, ready for use. To pair O ROKR Pro with   
					another phone, follow the same instructions. O ROKR Pro can store pairing information for up to eight different devices.   
					TO MANUALLY PLACE O ROKR PRO IN PAIRING MODE   
					With O ROKR Pro turned off, press and hold the Call button for 7 seconds. The indicator light will turn solid red.   
					TO PAIR O ROKR PRO WITH YOUR MUSIC PLAYER   
					For each music-streaming Bluetooth device, follow the instructions listed above. Some devices require an add-on Bluetooth adapter.   
					Consult the user’s guide that came with your Bluetooth device or adapter for additional information.   
					WHEN PAIRING WITH ADDITIONAL DEVICES, NOTE THE FOLLOWING:   
					• If you are pairing with a device that offers no means of entering the four zeroes mentioned in the instructions above, simply   
					put O ROKR Pro and the device in pairing mode then wait a few seconds. Pairing should occur automatically.   
					• To minimize pairing issues with additional devices, make sure that devices you have already paired with O ROKR Pro are off.   
					• O ROKR Pro keeps a list of the paired devices in its internal memory. The list is in chronological order. When you pair a device   
					beyond the maximum total of eight, the least used device on the list is removed from memory.   
					• Any of the eight paired devices can initiate a connection with O ROKR Pro. As long as you initiate the connection from the   
					device, O ROKR Pro will connect to it.   
					• Two different devices (such as a phone and an MP3 player) can be wirelessly connected to O ROKR Pro at the same time.   
					However, two similar devices (such as two phones) cannot.   
					• Whichever device initiates the connection to O ROKR Pro becomes the “last device connected to” in the memory list. When   
					you initiate a connection from O ROKR Pro (by pressing the Call button), for a phone connection, or PLAY/PAUSE button,   
					for music connection O ROKR Pro will automatically initiate a connection to the last device it was connected to.   
					• If you want O ROKR Pro to connect to a different device in its memory list, you must initiate the connection from that device.   
					5 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				TURNING O ROKR PRO ON AND OFF   
					To turn O ROKR Pro on: Press and hold the Call   
					button for approximately three seconds until you hear four audio tones rising in pitch,   
					or you see the indicator light flash red > amber > green > green.   
					To turn O ROKR Pro off: While O ROKR Pro is not being used for an active call, press and hold the Call button for approximately three   
					seconds until you hear four audio tones descending in pitch, or you see the indicator light flash green > amber > red > red.   
					NOTE THE FOLLOWING:   
					• When O ROKR Pro is activated (and not being used for music), it is in “standby” mode, ready to answer a call. The internal   
					rechargeable battery offers over 100 hours of standby time.   
					• When O ROKR Pro is turned off, it uses no power. However, the internal rechargeable battery will naturally lose power over   
					time, and will eventually require charging.   
					ADJUSTING VOLUME   
					To adjust volume, use the Volume Up   
					and Volume Down   
					buttons on the left stem.   
					• To increase speaker volume, press the front volume button   
					• To decrease speaker volume, press the back volume button   
					repeatedly until you reach the desired volume level.   
					repeatedly until you reach the desired volume level.   
					• While adjusting volume in phone mode, you will hear a single high tone when the maximum or minimum volume level is   
					reached. (You will not hear these tones while adjusting music volume.)   
					6 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				MAKING AND RECEIVING CALLS   
					In addition to the volume buttons, the Call button is all you need to use O ROKR Pro with your phone.   
					USING O ROKR PRO FOR CALLS   
					TURN O ROKR PRO ON   
					Press and hold the Call   
					button for 3 seconds.   
					Press the Call   
					button briefly.   
					ANSWER A CALL   
					Press the Volume Up   
					button repeatedly to increase the volume.   
					button repeatedly to decrease the volume.   
					ADJUST VOLUME   
					Press the Volume Down   
					Press and hold the Volume Down button for 1 second, until a medium pitch tone is heard. Repeat to release from mute.   
					Press the Call button briefly.   
					Press and hold the Call button for 3 seconds.   
					MUTE THE MICROPHONE   
					END A CALL   
					TURN O ROKR PRO OFF   
					Note that if communication between O ROKR Pro and your phone is interrupted (such as when you move O ROKR Pro out of range), O   
					ROKR Pro will attempt to reestablish the link.   
					Additional functions depend on what Bluetooth profile your mobile phone supports. O ROKR Pro supports both the Bluetooth Headset   
					and Handsfree profiles. The tables below give instructions for each profile. When using the tables, please note the following:   
					• O ROKR Pro must be turned on for the functions to work.   
					• If your phone supports the “dial by voice” feature, the phone must be turned on (in idle mode) for the feature to work. (Note:   
					Some phones do not support “dial by voice” over a headset.)   
					• Some phones do not support all the features listed. Please consult the user’s guide that came with your phone. Features like   
					Three-way Calling may require additional services from your phone service provider.   
					HANDSFREE PROFILE   
					Press and hold the Call   
					button for 2 seconds.   
					REJECT A CALL   
					Press the Call button briefly then speak the name or command.   
					DIAL BY VOICE   
					Press and hold the Call   
					Press and hold the Call   
					button for 2 seconds.   
					button for 2 seconds.   
					REDIAL A NUMBER   
					PUT A CALL ON HOLD   
					ANSWER 2ND INCOMING CALL   
					Press and hold the Call   
					button for 2 seconds.   
					(AND PUT CURRENT CALL ON HOLD)   
					TRANSFER CALL FROM PHONE TO O ROKR PRO   
					Press the   
					Call   
					button briefly.   
					HEADSET PROFILE   
					Press the Call   
					Press the Call   
					button briefly.   
					SEND A NUMBER DIALED ON THE PHONE   
					button briefly then speak the name or command.   
					DIAL BY VOICE   
					Press and hold the Call   
					Press and hold the Call   
					button for 2 seconds.   
					button for 2 seconds.   
					REDIAL A NUMBER   
					TRANSFER CALL FROM PHONE TO O ROKR PRO   
					7 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				CONTROLLING MUSIC   
					Use O ROKR Pro to wirelessly control music from your Bluetooth music-streaming phone or music player. If a call comes in while music   
					is playing, just press the Call   
					button on O ROKR Pro to pause the music and take the call. After the call is finished, press the Call   
					button again to go back to where you left off in the music.   
					Note the following:   
					• If you don’t hear music, be sure your music-streaming phone or music player is on; be sure it is properly paired with   
					O ROKR Pro (see the section on pairing); and be sure the Bluetooth function on your phone or music player is   
					activated. Also try increasing the volume level on O ROKR Pro.   
					• Whenever you want to make a call, simply press the Call   
					button.   
					• When O ROKR Pro is in use for a call, its music control buttons are deactivated.   
					• Some music players do not support the feature that pauses the music when a call is received. For those players,   
					O ROKR Pro will mute the music during a call.   
					USING O ROKR PRO FOR MUSIC   
					Press and hold the Call   
					Press the Play / Pause   
					button for 4 seconds.   
					button briefly.   
					TURN O ROKR PRO ON   
					PLAY MUSIC   
					Press and hold the Play / Pause   
					button for 1 second.   
					STOP MUSIC   
					Press the Play / Pause   
					button briefly.   
					PAUSE / RESUME PLAYING   
					ADJUST VOLUME   
					Press the Volume Up   
					Press the Volume Down   
					button repeatedly to increase the volume.   
					button repeatedly to decrease the volume.   
					Press the Fast Forward / Next Song   
					button briefly.   
					SKIP TO NEXT SONG   
					Press and hold the Fast Forward / Next Song   
					Press the Fast Backward / Previous Song   
					button.   
					FAST FORWARD WITHIN A SONG   
					PLAY PREVIOUS SONG   
					button briefly.   
					Press and hold the Fast Backward / Previous Song   
					Press and hold the Call button for 3 seconds.   
					button.   
					FAST BACKWARD WITHIN A SONG   
					TURN O ROKR PRO OFF   
					8 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				INDICATOR LIGHT   
					The indicator light on O ROKR Pro provides the following information:   
					DURING PAIRING   
					The light is solid red. It to flashes green ten times when pairing is successful.   
					Solid green = fully charged   
					Solid amber = 99% to 50% charged   
					Solid red = 49% to 0% charged   
					DURING CHARGING   
					The light flashes every 4 seconds:   
					Green indicates 100% to 67% charge remaining.   
					Amber indicates 66% to 34% charge remaining.   
					Red indicates 33% to 0% charge remaining.   
					WHILE WIRELESSLY CONNECTED   
					TO A DEVICE   
					The light flashes twice in red every 4 seconds.   
					The light flashes red > amber > green > green.   
					The light flashes green > amber > red > red.   
					WHILE NOT CONNECTED TO A DEVICE   
					WHILE POWERING UP   
					WHILE POWERING DOWN   
					Note the following:   
					• Bluetooth Sniff Mode technology ensures that power usage is minimized.   
					• The only time O ROKR Pro does not use power is when it is completely turned off. However, even when   
					not used, the internal rechargeable battery gradually loses power over time and requires recharging.   
					AUDIBLE INDICATORS   
					Sound tones provide the following information:   
					Low battery.   
					DUAL HIGH/LOW TONE EVERY 60 SECONDS   
					Out of range.   
					NO AUDIBLE TONES; DETERIORATING   
					AUDIO QUALITY; SKIPPING MUSIC   
					(Move O ROKR Pro closer to your phone or Bluetooth enabled audio device.)   
					SINGLE HIGH TONE DURING   
					VOLUME ADJUSTMENT   
					Maximum or minimum volume level has been reached. Phone mode only.   
					Incoming call.   
					RING TONE   
					Enter pairing mode. Pairing is confirmed.   
					SINGLE HIGH TONE   
					Initiate voice activation.   
					(Speak the name of the person you want to dial.)   
					SINGLE LOW TONE   
					Voice tag not recognized.   
					(The name of the person you want to dial was not recognized.)   
					DUAL HIGH/LOW TONE   
					SINGLE MEDIUM TONE EVERY 20 SECONDS   
					FOUR TONES, LOW TO HIGH   
					Microphone is muted.   
					O ROKR Pro is turned off.   
					O ROKR Pro is turned on.   
					FOUR TONES, HIGH TO LOW   
					9 
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				OAKLEY FRAME AND LENS TECHNOLOGY   
					You're now wearing the best eye protection on earth.   
					® 
					Only Oakley utilizes pure Plutonite lens material, a proprietary synthetic that exceeds the optical requirements of ANSI Z87.1 standards   
					while inherently blocking 100% of all UVA, UVB, UVC and harmful blue light. Oakley performance eyewear also takes advantage of   
					® 
					patented XYZ Optics , a breakthrough that maintains precise clarity at all angles of vision and extends the range of optical correction to   
					the periphery of dual-spherical eyewear lenses and single-lens sports shields.   
					All Oakley sunglasses satisfy ANSI Z80.3 & EN 1836 standards for optical and mechanical performance and are in accordance with the   
					EC Directive 89/686/EEC for the I.P.D. of category I corresponding to the European Community. Light transmission ranges from 10% to   
					39% of available light. All transmission profiles are based on data obtained according to ANSI Z80.3 and EN 1836 test protocols.   
					LENS TINT TRANSMISSION PROFILES   
					Grey:   
					18%   
					22%   
					10%   
					protection index 2   
					Bronze Iridium:   
					protection index 2   
					Black Iridium:   
					protection index 3   
					The sunglass lens type is printed on the package. The corresponding protection index can be found in the Lens Tint Transmission Profiles   
					chart above.   
					Protection Index (in compliance with the standard EN 1836)   
					Index 0: Aesthetic, very low protection   
					Index 1: For weak sun luminosity   
					Index 2: For average sun luminosity   
					Index 3: For strong sun luminosity   
					CLEANING   
					How to keep the best at their best   
					® 
					® 
					All Oakley Lenses: To help maintain the High Definition Optics (HDO ) of Oakley lenses, your new eyewear comes with a specially-   
					™ 
					woven electrostatic Microclear bag for cleaning and storage. Using it will preserve the superior optical quality of Oakley's pure   
					® 
					Plutonite lenses. Hand wash and air-dry the Microclear bag regularly. Iridium Lenses: Oakley Iridium lens coating is engineered to   
					reduce glare and improve contrast. An array of available tints allows the wearer to balance light transmission in any light condition. The   
					12-micron jacket of Iridium must be treated with special care to avoid scratching. Never use cleaning solutions. Use only mild soap and   
					water, and dry by gently blotting with the Microclear bag provided.   
					When cleaning O ROKR Pro, please note the following:   
					• O ROKR Pro is not waterproof. Moisture may damage the electronic circuitry. Do not rinse or immerse any part of the frame.   
					Keep the frame dry at all times.   
					• Before cleaning, make sure O ROKR Pro is unplugged from the wall charger.   
					• Do not clean the lenses with soaps, detergents, ammonia, alkaline cleaners, abrasive cleaning compounds or solvents. These   
					substances may damage the lens coatings or leak into the module and damage the electronic circuitry.   
					• Should a lens become scratched, have it replaced immediately to ensure your vision is not compromised.   
					10   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				CHANGING THE LENSES   
					The lenses of O ROKR Pro can be easily changed. The instructions below show you how to remove the current lenses and install a different   
					set.   
					WARNING: Follow these instructions carefully. Failure to do so may adversely affect optical performance. Improperly installed lenses may   
					fail to stay in place, causing interference with your vision.   
					To remove the lenses:   
					1 
					2 
					1. Hold the frame upside down as shown in Figure 1. Grip the lens with one   
					hand. Grip the frame with your other hand by placing your index finger on   
					the nose bridge and your thumb beneath the frame rim.   
					2. Gently flex the frame by applying upward pressure with your thumb and   
					outward pressure with your index finger. (See Figure 2.) Pull the lens out   
					of the groove.   
					To install new lenses:   
					1 
					2 
					3 
					1. Hold the frame upside down as shown in Figure 1. Slide the lens into   
					place so the outer edge tab fits into the frame slot.   
					2. Rotate the lens into the frame groove until the inner edge tab slides   
					gently into the frame slot.   
					3. Hold the lens firmly. With your other hand, slide your thumb along the   
					frame edge until the inner lens tab snaps firmly into place.   
					11   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				SAFETY AND GENERAL INFORMATION   
					IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR DEVICE.   
					O ROKR Pro complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful   
					interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See 47   
					CFR sec 15.19 (3).   
					USE AT YOUR OWN RISK   
					AVOID DISTRACTION   
					Using headsets while operating a motor vehicle, motorcycle or bicycle is dangerous, and is illegal in some states. Check your local laws. Use   
					caution while using your O ROKR Pro when engaging in ANY activity that requires your full attention. While engaging in such activity, remove   
					al of speakers from your ears or turning off the sound will keep you from being distracted, so as to avoid accident or injury. Avoid placing or   
					receiving calls while driving an automobile, motorcycle, equipment or any other motorized mode of transportation to reduce the risk of   
					accident or injury.   
					AVOID HEARING DAMAGE   
					Using the headset at high volume may result in permanent hearing loss. If you experience ringing in your ear, reduce the volume or discontinue   
					using O ROKR Pro. With continued use at high volume, your ear may become accustomed to the sound level, which may result in permanent   
					damage to your hearing. Keep O ROKR Pro volume at a safe level.   
					EYEWEAR USE   
					This eyewear is not designed to protect the wearer from all injury in the event of impact with hard objects or if the lens or lenses are not   
					properly secured in the frame. It is not recommended to use tinted lenses for night driving, or direct viewing of the sun or strong artificial light   
					sources. Sunglasses are not recommended for industrial protection.   
					AVOID MOISTURE   
					Using O ROKR Pro in or near water or other liquids, or in wet locations, may cause electric shock and serious injury. The device is not   
					waterproof, so follow these safeguards:   
					• Do not use O ROKR Pro while swimming or bathing.   
					• Do not wear O ROKR Pro in the rain.   
					• Do not wear O ROKR Pro during prolonged periods of perspiration.   
					• If any food or liquid is spilled on O ROKR Pro or its power adapter, unplug the charging cable from O ROKR Pro and unplug the power adapter   
					from the electrical outlet before drying.   
					LOCATION OF USE   
					O ROKR Pro is NOT to be used in the vicinity of any explosive or hazardous substances, as it may become volatile and cause serious injury or   
					death.   
					See "Electromagnetic Interference" below for restrictions on using O ROKR Pro in medical facilities and aboard aircraft.   
					SAFETY INFORMATION: WIRELESS DEVICES   
					ELECTROMAGNETIC INTERFERENCE   
					RF ENERGY WARNING   
					To avoid electromagnetic interference and/or compatibility conflicts, turn off your device in any facility where posted notices instruct you to   
					do so. Hospitals or health care facilities may be using equipment that is sensitive to external radio frequency (RF) energy emitted by your   
					device.   
					AIRCRAFT   
					While aboard aircraft, turn off your device when instructed to do so. Any use of the device must be in accordance with applicable regulations   
					per airline crew instructions.   
					MEDICAL DEVICES   
					Hearing Aids: Some devices may interfere with some hearing aids. In the event of such interference, you may want to consult with your   
					hearing aid manufacturer to discuss alternatives.   
					Other Medical Devices: If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately   
					shielded from RF energy. Your physician may be able to assist you in obtaining this information.   
					ELECTRONIC SYSTEMS   
					Do not expose O ROKR Pro to strong magnetic fields such as those that surround stereo speakers and TV picture tubes, in your car or home,   
					12   
					without first checking with the manufacturer of those items.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				PROPER CARE OF YOUR O ROKR PRO   
					DO NOT MODIFY OR DISMANTLE   
					Do not attempt to open O ROKR Pro. Doing so may expose you to electric shock and serious injury. There are no user-serviceable parts inside.   
					Any attempt to alter or repair the unit will void the limited warranty. Users are not permitted to make changes or modify the device in any way.   
					Changes and modifications void the user's authority to operate the device. See 47 CFR Sec. 15.21.   
					BATTERY   
					Do not attempt to remove the internal rechargeable battery. Disposal of devices that contain internal rechargeable batteries must be in   
					accordance with local environmental regulations.   
					TEMPERATURE   
					• Do not store or use O ROKR Pro in temperatures lower than -10°C / -4°F or higher than 50°C / 122°F.   
					• Do not recharge O ROKR Pro in temperatures lower than 0°C / 32°F or higher than 40°C / 104°F.   
					• Conditions inside a parked car can exceed this temperature range. Do not store O ROKR Pro in a parked car.   
					• Do not store O ROKR Pro in direct sunlight.   
					• Storing O ROKR Pro fully charged in high temperature conditions may permanently reduce the life of the internal battery.   
					• Battery life may temporarily shorten in low-temperature conditions.   
					SHOCKWAVE   
					Do not expose O ROKR Pro to excessive force or impact. Be careful not to drop O ROKR Pro.   
					CHARGER   
					Do not force the charging cable connector into the module port. If the connector won't go into the port, try flipping the connector 180 degrees.   
					Do not attempt to charge O ROKR Pro with any charger other than the one designed by Oakley specifically to be used with this product.   
					CARING FOR THE ENVIRONMENT BY RECYCLING   
					When you see this symbol on a Motorola product, do not dispose the product with household waste.   
					RECYCLING MOBILE PHONES AND ACCESSORIES   
					032375o   
					The rechargeable batteries that power this product must be disposed of properly and may need to be recycled. In some countries or   
					regions, collection systems are set up to handle electrical and electronic waste items. Contact your regional authorities for more details. If   
					collection systems aren’t available, return unwanted mobile phones or electrical accessories to any Motorola Approved Service Centre in your   
					region. Warning: Never dispose of batteries in a fire because they may explode.   
					13   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				SPECIFICATIONS   
					Bluetooth Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BT 2.0, backward compatible with 1.2   
					Bluetooth Profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Handsfree, Headset, A2DP, AVRCP   
					Speaker Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fully articulated for adaptable fit   
					Music Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Hz – 20,000 Hz   
					Telephony Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 Hz – 3,000 Hz   
					Battery Life When Fully Charged . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 hours*   
					Battery Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Integrated rechargeable Li-Ion Polymer   
					Standby Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Over 100 hours   
					Charging Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fast charge (80% capacity) in 1.5 hours; full charge in 3.0 hours   
					Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Built-in port for USB (Mini-B) cable connection   
					Radio Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4 GHz, GFSK   
					Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 grams   
					Included Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . None required   
					Included Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wall adapter for local region, User Guide CD, Quick Start Guide   
					Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . World Wall Charger, Oakley Car Charger, USB Cable, Soft Vault, Soft Box   
					Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Warranted by Motorola for 1 year   
					Operation/storage environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -10ºC to 50ºC (-4ºF to 122ºF); 5% to 90% relative humidity   
					Charging environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0ºC to 40ºC (32ºF to 104ºF)   
					*Battery life depends on numerous factors including volume level and environmental temperature.   
					14   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				SERVICE AND SUPPORT   
					
					the latest support information on OROKR Pro. If OROKR Pro still does not function, follow the procedures below to make a warranty claim.   
					OAKLEY LIMITED WARRANTY   
					In the United States, OROKR Pro is warranted against manufacturer’s defects for 1 year from the date of purchase. Outside of the U.S.   
					please contact your local corporate office for warranty information. Coverage is valid only with proof of purchase from an Authorized   
					Oakley OROKR Pro Dealer. Oakley will have the option, at its discretion, to repair or replace the defective product for the consumer. This   
					warranty does not cover scratched lenses. Oakley may replace or repair the product with new or reconditioned parts or product, and   
					the replaced parts or product become the property of Oakley.   
					EXCLUSIONS AND LIMITATIONS   
					Please note that this warranty does not cover the following defects or damages to your Oakley OROKR Pro product:   
					1) after the warranty expires;   
					2) if the product was not originally purchased from an authorized Oakley dealer;   
					3) from repair services or attempts not performed by Oakley;   
					4) from normal wear and tear;   
					5) from fire, earthquake, flood or other natural disasters;   
					6) from alteration or disassembly of product;   
					7) from accidents, neglect, water or moisture damage or abuse;   
					8) caused during shipment to Oakley.   
					Oakley is not liable for any damage to or loss of any data or other information stored on any media contained within the Oakley OROKR Pro   
					product. Recovery or reinstallation of programs, data or other information is not covered under this Limited Warranty. It is your   
					responsibility to backup all data before returning your product to Oakley, and for restoring all data upon your product’s return to you.   
					THE WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND   
					CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED. OAKLEY GRANTS NO OTHER EXPRESS OR IMPLIED WARRANTIES,   
					INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. THE CUSTOMER’S   
					EXCLUSIVE REMEDY FOR A BREACH OF WARRANTY WILL BE THE REPAIR OR REPLACEMENT OF THE ITEM, AS DETERMINED BY   
					OAKLEY IN THE EXERCISE OF ITS SOLE DISCRETION.   
					TO THE MAXIMUM EXTENT PERMITTED BY LAW, OAKLEY IS NOT RESPONSIBLE FOR DIRECT, SPECIAL INCIDENTAL OR CONSEQUENTIAL   
					DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING ANY   
					COSTS OF RECOVERING OR REPRODUCING ANY DATA STORED IN OR USED WITH THE OAKLEY PRODUCT, AND ANY FAILURE TO   
					MAINTAIN THE CONFIDENTIALITY OF DATA STORED ON THE PRODUCT.   
					The governing law for any warranty claim will be the laws of the State of California, without reference to conflicts of law principles.   
					Venue for any such action shall lie exclusively within the state or federal courts located in Orange County,California. No Oakley dealer,   
					agent or employee is authorized to make any modification, extension or addition to this warranty. Legal rights under applicable national   
					law governing the sale of consumer goods are not affected by this warranty.   
					15   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				OBTAINING WARRANTY SERVICE   
					The defective product must be returned to Oakley by the owner with a Return Authorization (RA) number and a dated proofof purchase   
					from an authorized Oakley OROKR Pro dealer. Call Oakley Customer Service at 800-403-7449 (U.S.) to request an RA number. Based on   
					the information you provide, Customer Service will determine if an RA number should be issued. Credit card information must be   
					provided for Customer Service to issue an RA number. Oakley cannot accept any product that does not include a valid RA number on   
					the shipping package. RA numbers are valid for 15 days. If you ship the product to Oakley for warranty, you assume the risk of damage   
					during shipping, so it is your responsibility to purchase any necessary insurance from your shipping carrier. You must use the original   
					packaging (or the equivalent) and pay any applicable shipping charges.   
					NOTE: If product is returned with a claimed manufacturing defect yet is diagnosed to be NTF (No Trouble Found), or if the warranty is   
					void pursuant to the above exclusions, a $39 diagnostic, shipping and handling fee will apply and will be charged to your credit card.   
					Product returned after expiration of the warranty period may be repaired or replaced, at Oakley’s discretion, for a specified fee to the   
					customer. Contact Oakley Customer Service for further details.   
					Within the United States, telephone our global headquarters at 1 (800) 403-7449 for warranty assistance. Customers outside the United States   
					should contact their local corporate office for warranty information. In Europe, call Oakley Europe Customer Service at 00 800 62 55 39 00 or   
					write to [email protected] to have more information about the warranty procedure in case of defective products.   
					International Contact Information   
					Local corporate offices:   
					OAKLEY AFRICA   
					+27 41 501 0200   
					OAKLEY GMBH   
					+49 89 99650 4100   
					OAKLEY BRASIL   
					+55 11 3038 9999   
					OAKLEY JAPAN   
					0120 009 146   
					OAKLEY CANADA   
					OAKLEY MEXICO   
					+52 5 247 0310   
					800 448 9714   
					OAKLEY EUROPE   
					BENELUX, FRANCE,   
					ITALIA, SCANDINAVIA   
					00 800 62 55 39 00   
					OAKLEY SOUTH PACIFIC   
					+61 3 5225 4100   
					OAKLEY UK LTD.   
					+44 1462 475 400   
					ESPAÑA   
					900 953 398   
					PORTUGAL   
					800 833 121   
					SVERIGE   
					020 79 1037   
					16   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				STATEMENT ACCORDING TO FCC PART 15.105:   
					NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These   
					limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and   
					can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio   
					communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful   
					interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to   
					correct the interference by one or more of the following measures:   
					• Reorient or relocate the receiving antenna.   
					• Increase the separation between the equipment and receiver.   
					• Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.   
					• Consult the dealer or an experienced radio/TV technician for help.   
					EUROPEAN UNION DIRECTIVES CONFORMANCE STATEMENT   
					Hereby, Motorola declares that this product is in compliance with   
					• The essential requirements and other relevant provisions of Directive 1999/5/EC   
					• All other relevant EU Directives.   
					The above gives an example of a typical Product Approval Number. You can view your product’s Declaration of Conformity (DoC) to Directive   
					
					“Search” bar on the web site.   
					FCC NOTICE TO USERS   
					Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by the party   
					responsible for compliance could void the user’s authority to operate the equipment. See 47 CFR Sec. 15.21. This device complies with part 15 of   
					the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must   
					accept any interference received, including interference that may cause undesired operation. See 47 CFR Sec. 15.19(3).   
					EXPORT LAW ASSURANCES   
					Export Law Assurances This product is controlled under the export regulations of the United States of America   
					and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of this product to certain   
					destinations. For further information contact the U.S. Department of   
					Commerce or the Canadian Department of Foreign Affairs and International Trade.   
					INDUSTRY CANADA NOTICE TO USERS   
					Operation is subject to the following two conditions: (1) This device may not cause interference and (2)   
					This device must accept any interference, including interference that may cause undesired operation   
					of the device Ref IC RSS 210 Sec.5.11. The term “IC” before the declaration/registration number only   
					signifies that registration was performed based on Declaration of Conformity indicating that Industry   
					Canada technical specifications were met. It does not imply that Industry Canada approved the equipment.   
					See Ref IC Self-Marking 6(f) and RSP-100 Sec. 4.   
					AUSTRALIA   
					MEXICO   
					Oakley, the Ellipse Logo, High Definition Optics and HDO are registered trademarks of Oakley, Inc. in the U.S. and other countries.   
					Motorola, the Stylized M Logo and O ROKR Pro are trademarks of Motorola, Inc. in the U.S. and other countries.   
					Bluetooth is a registered trademark of Bluetooth SIG, Inc. in the U.S. and other countries.   
					The Bluetooth trademarks are owned by their proprietor and used by Motorola under license.   
					U.S. Patent Nos. 5648832, 5689323, 5969789, 6010218, 6168271 B1   
					U.S. and International Patents Pending   
					©2007 Oakley, Inc.   
					17   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				 |