MFR-2200 Series
Dual Simultaneous Soldering & Rework System
Systems Guide & MFR Range Comparison
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configurations &
Part Numbers
6 NEW SYSTEMS
MFR-2210
MFR-2220
MFR-2240
MFR-2241
MFR-2211
MFR-2222
Example
MFR-2241
MFR-2xxx
MFR-x2xx
MFR-xx4x
MFR-xxx1
= 2 Outputs
= 2 Dual, no pump
= 4 Tweezers
= 1 Cartridge
Confidential and Proprietary to OK International. © OK International All rights reserved.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Supply Comparison
MFR-PS1K (Existing)
MFR-PS2200 (New)
Power: 50W
Power: 60W
Output: dual switched
Output: dual simultaneous
Two position switch- left or right
Markings on front panel: none
Three position switch: left, center
(both) or right
Markings on front panel: “I II I”
Sleep function: “Auto-Standby”,
user selectable to one hour
Sleep function: via Auto Sleep
Workstands
Auto-off: user adjustable to 2.5
hours
Auto-Off: fixed at two hours
Confidential and Proprietary to OK International. © OK International All rights reserved.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Hand-piece Guide
New
Existing
Description
Tips & Cartridges
Hand-piece
Hand-pieces
Hand-piece, soldering cartridge
Hand-piece, soldering tip
MFR-HSR
MFR-HPS
MFR-HPT
MFR-H1-SC
MFR-H2-ST
MFR-H4-TW
SFP & RFP
SFV
Hand-piece, tweezers cartridge
TFP
Design Change of New Hand-pieces
The new hand-pieces, MFR-H1-SC, MFR-H2-ST & MFR-H4-TW, do not contain the motion switch which
detects movement and activates the “Auto-Standby” or “Auto-Off” modes in the existing model, MFR-PS1K.
Backwards Compatibility: New Hand-pieces to Old Power Supply
The new hand-pieces can be used with the old power supplies (MFR-PS1K) but MUST also include an Auto
Sleep Workstand (WS1). NOTE: When the new hand-pieces are used with the MFR-PS1K, the “Auto-Off”
function will not function. WHILE THE NEW HAND-PIECES CAN BE USED WITH THE EXISTING POWER
SUPPLY (MFR-PS1K), IT IS NOT RECOMMENDED.
Forward Compatibility: Old Hand-pieces to New Power Supply
The new power supply (MFR-PS2200) will operate all of the old hand-pieces. HOWEVER, the old hand-
pieces must use Auto Sleep Workstands to retain the "sleep" function.
Confidential and Proprietary to OK International. © OK International All rights reserved.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Upgrade Kits
New
Upgrade
Kit
Existing
Upgrade Kit
Hand-piece
Workstand
MFR-H1-SC: hand-piece, WS1: Sleeper workstand,
solder cartridge black cradle
MFR-SRC-AD
MFR-UK1
MFR-H2-ST: hand-piece, WS1: sleeper workstand,
solder tip black cradle
MFR-H4-TW: hand-piece, MFR-WSPT: workstand,
precision tweezers black cradle
MFR-PST-AD
MFR-PTZ-AD
MFR-UK2
MFR-UK4
Upgrade Kits allow the user to add hand-pieces and workstands as needed.
There is no financial “penalty” for adding to an existing system.
Confidential and Proprietary to OK International. © OK International All rights reserved.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
|