CDN15/MPCD3
PROFESSIONAL CD PLAYERS
USER’S MANUAL
©2002
Industries
Download from Www.Somanuals.com. All Manuals Search And Download.
CDN15/MPCD3
®
CDN15/MPCD3
PROFESSIONAL CD PLAYERS
CONGRATULATIONS...
You have just purchased a CD player designed specifically for the professional
DJ. This unit has been designed to provide CD mixing with the same ease and
creativity that you have enjoyed with records. Please take a few moments to
familiarize yourself with your CD Player by reading the following information before
attempting to operate the unit.
Once again, congratulations and thank you for making Numark your choice in
professional CD players.
FEATURES:
MPCD3 only
• MP3 Playback from CDR
• Interactive pitch wheel adjustment
• Rubber buttons
• Infrared Remote Control
• Buffered Anti-Shock™ Memory
• Digital Output
• Direct Track Access
• Frame search
• Track Sequence Programming
• Sleep mode
• Rapid wheel search
• Auto cue
• Remote Start
• Relay Start
• Pitch display
• CDR compatible
CHECK TO BE SURE THE FOLLOWING ITEMS ARE IN THIS BOX:
CD PLAYER UNIT
IEC POWER CORD
MPCD3 ONLY:
INFRARED REMOTE CONTROL
OWNERS MANUAL (THIS BOOKLET)
RCA CONNECTING CABLES
Please record the serial number of your unit as shown on the back of the chassis as well as the name of the dealer from whom you
purchased the unit. Retain this information and your original purchase receipt for your records. Please return the enclosed warranty
card to register your CD player with us.
MODEL: ____________________________
SERIAL NUMBER: ___________________
PURCHASED FROM: _________________________
DATE OF PURCHASE: ________________________
- The Leader in DJ Technology
©2002 Numark Industries
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
CDN15/MPCD3
TABLE OF CONTENTS
Safety Instructions
2
3
5
Introduction and Registration
Set-up & Connections
Description of the Features
Face Panel
6
8
9
Rear Panel
Display
MP3 Audio Information
Basic Operation
10
Play, Pause and Cue Operations
Matching the Tempo
Beat Matching Using Pitch Bend
11
12
12
Example of Mixing
13
14
14
15
16
Before Switching off the Power
Troubleshooting Guide
Information and Specifications
Warranty
- The Leader in DJ Technology
©2002 Numark Industries
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
CDN15/MPCD3
SETUP and CONNECTIONS
Typical connection with a mixer is illustrated below.
1. Mount the units in your console or rack with 19” EIA rails.
2. The CD Player should be mounted not to exceed an angle of 15 degrees.
3. Your CD player can be affected by excess vibration so mount the units in a secure
environment if possible.
4. Connect the line output connections using the supplied audio cable from the CD Player to the line inputs of your
mixer.
5. Connect IEC power cord to appropriate power source.
6. (MPCD3 only) Connect Fader start cable. Attach your CD play to a similarly equipped DJ
mixer.
(This cable is a standard 1/8” mono – 1/8” mono cable obtainable from you local music or electronics store)
7. (MPCD3 only) If setting up 2 units, you can connect a relay cable between the units.
(This cable is a standard 1/8” mono – 1/8” mono cable obtainable from you local music or electronics store)
115V
LINE VOLTAGE SELECTION
1) The desired voltage may be set with the VOLTAGE SELECTOR switch on the rear panel of the unit.
2) Do not move the VOLTAGE SELECTOR switch with excessive force as this may cause damage.
3) If the VOLTAGE SELECTOR switch does not move smoothly contact a qualified serviceman.
230V
DIGITAL OUTPUTS: This CD player is specially equipped with digital outputs. The format is type 2, form 1,
also known as S/PDIF (Sony/Phillips Digital Interface Format). When the digital output is used the variable
pitch slider and pitch bend buttons or pitch wheel should not be used.
Note: If digital information is allowed to change in pitch, other devices may not read the digital output properly.
- The Leader in DJ Technology
©2002 Numark Industries
- 5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
CDN15/MPCD3
FRONT PANEL FEATURES
1. Open/Close: Press to load or eject the disc. The tray will not open if a disc is in play. The tray door will automatic
close in 30 seconds if left open. This is to protect the tray from accidental damage while open
2. Single: toggles the unit to play back just one track at a time (single) or play continuously through all tracks and then
start over repeating the CD infinitely (continuous).
3. Time: switches the time modes on the display between elapsed playing time, remaining time on the track, and
remaining time on the total CD. When toggled to remaining time total the total number of remaining tracks will also
show.
4. LCD Display : Indicates all the functions, as they are occurring, with the CD.
5. Track Buttons: These buttons are used to select the track to be played.
6. Search Button: Pressing this button allows you to use the wheel and rapidly scan the music to find a cue point. The
search function automatically shuts off after 8 seconds of non-use or you may toggle it off.
7. Cue: Returns and pauses the music at the last set cue point. The cue point is where the music will begin when play
is pressed. The cue point is set as the initial start point on a track or can be moved when play is started at a different
point. For instance if the music is paused then play is pressed a new cue point is set. You can easily edit the cue
point by turning the wheel during pause. As you rotate the wheel the music will sound. By stopping the wheel and
pressing play a new point is set. Alternately pressing the PLAY button and the CUE button allows the CD to be
played from the same position any number of times.
Note: Pressing cue 2 times plays music temporarily from this point until the button is released.
8. Play/Pause: Starts the music from the cue point or pauses it while in play. By pressing play after pause a new cue
point will be set
9. Jog Wheel:
Cue Function: As explained under “CUE”, when the music is paused and you rotate the wheel, music will sound. By
pressing play a new cue point is set.
Search Function: As explained under “SEARCH BUTTON”, when search is press and you rotate the wheel, the
music will rapidly scan the music to find a cue point.
Pitch Bend Function: allows the user to temporarily change the speed of the music to align beats. When the beats
of the music of the CD you wish to match is fast compared to the tempo of the other music rotate the jog wheel
counter clockwise (to the left). When the CD is behind rotate the jog wheel clockwise (to the right). The pitch changes
temporarily while the jog wheel is rotated. The faster you rotate the wheel the more pitch is changed. Releasing the
wheel results in a return to the original pitch.
- The Leader in DJ Technology
©2002 Numark Industries
- 6 -
Download from Www.Somanuals.com. All Manuals Search And Download.
CDN15/MPCD3
10. Pitch Range: actives the pitch slider and adjusts the amount of control the pitch slider has on the overall speed of
music. Tapping the pitch will toggle slider between 8% and 16% pitch ranges. Holding the pitch for 3 seconds will
deactivate the pitch control.
11. Pitch Range LEDs: indicate current pitch range. When both LEDs are off the pitch slider is not active
12. Pitch Slider: By moving the slider in the (+) direction the speed of the music permanently speeds up. By moving the
slider in the (-) direction the speed of the music permanently slows down. To match the speeds of two CDs you can
adjust the pitch. When the tempo of the music of the CD you wish to match is slow compared to the tempo of the
other music, move the slider to the (+) side and match the speed. When faster, move the pitch slider to the (-) side.
By making this adjustment the speeds will be matched though the beats may not yet be aligned.
13. Track Buttons: These buttons are used to select the track to be played.
14. Program:
•
•
•
•
•
•
Press program, the unit will stop and the program indicator will light
Select the track to be programmed
Press the PROGRAM button
Select anther track to be programmed
Press the PROGRAM button
Press Play
You can program up to 30 tracks. Press PLAY to start the program. To exit and erase program hold the program
button down for more than 2 seconds while the unit is stopped, open the disc tray, or turn off the power.
15. CD Drawer: Place your CDs you wish to play in here. This unit is designed to play commercially available CD and
properly burned and finalized CDR and CDRW formats. Due to variances on the specification of certain CD burners
and CDs some discs home made CDs may not play properly.
16. Power Switch: Turn on and turn off the machine with this button. The unit should always be shut down with this
button first before any external power is removed.
17. Infrared Remote Receiver (MPCD3 only): Used with wireless remote control to adjust functions of the unit. Should
be kept clear of objects that might block the infrared beam of the remote control.
- The Leader in DJ Technology
©2002 Numark Industries
- 7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
CDN15/MPCD3
REAR PANEL FEATURES
18. IEC Power Plug Connector: Plug your supplied power cord in here.
19. Voltage Selector: Set this switch to the voltage for your location.
20. RCA Audio Connectors: Connect your CD player to your mixer from this line level output.
21. Relay Connector (MPCD3 only): To use connect a relay cable between two units as described in the setup section
of this manual.
•
•
Insert CDs into both sides of the unit.
Hold down the “single” button for 3 seconds until the display indicates “auto-start”. Both units must be active for
relay to work.
•
•
Put both units in SINGLE play mode while learning this function.
Press play on the first unit. When that unit has finished play it will send a signal to the second to start play. You
will see the first unit start play and second pause and cue to the beginning of the next track.
Note: The play command is sent at the end of specified play. If the unit is in SINGLE mode the play command will
start at the end of the track. If the unit is in CONTINUOUS mode the play command will be sent at the end of the full
CD. Two CDs will play continuously, alternating from side to side.
22. Remote Start Connector: Use this connector to plug into your fader start compatible mixer or remote switch as
described in the setup section of this manual. This function is always active. To use this connector for fader start,
connect a fader start cable to a fader start compatible mixer. Every time you move the crossfader on the mixer over
to the side that the unit is on, it will automatically start playing. When you move the fader away from that side, the unit
will stop. Moving the fader back to the unit side will start play again.
There are two potential modes associated with the switch PLAY-CUE and PLAY/PAUSE. The factory setting is
PLAY-CUE mode. This means that when the unit is remotely stopped it will go back to the cue point automatically.
To change modes hold down the “time” button for 3 seconds and the display will flash the play “
" and pause “
”
icons. In PLAY/PAUSE mode, moving the crossfader away from the unit side pauses right where it is, and resumes
when the fader is brought back to the unit. To change modes back to PLAY-CUE hold down the “time” button for 3
seconds and the display will flash the play “
" and cue “
” icons in the display.
23. Remote Assignment Switch: Set this switch in the position for the method of remote start you will be using. Foot
switches are often used for creative mixing techniques and can be found in most music shops. Connector plugs are
often ¼” and an adapter to 1/8” will be needed for connection. There are also two types of footswitches that will work
with this connector. The first is a typical, on/off pushbutton switch and are generally used for switching channels on
guitar amps. The second switch is a momentary footswitch and is usually used for keyboard sustain pedals. If you
are unsure of the style of switch you have, try each position until it works as desired.
•
•
•
ON-OFF – for use with an ON-OFF switch.
MOMENTARY – for use with a momentary style of switch.
MIXER – for use with a fader start compatible DJ mixer
24. Digital Output: The format is type 2, form 1, also known as S/PDIF (Sony/Phillips Digital Interface Format). In order
to use the digital output you should not use variable pitch slider and the pitch bend buttons. If you adjust the pitch,
other devices may not read the digital output properly because the sampling rate changes.
- The Leader in DJ Technology
©2002 Numark Industries
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
CDN15/MPCD3
DISPLAY FEATURES
1. CUE: Flashing when the unit is setting a cue point. Lit continuously when the unit is paused at a cue point.
2. PAUSE (II): Active when the unit is paused.
3. PLAY (>): Active while the unit is actually playing a CD.
4. TRACK: Shows the track that the unit is playing.
5. TOTAL: indicates when total CD remaining tracks are displayed.
6. MINUTES: Shows the minutes elapsed or remaining depending on mode setting.
7. SECONDS: Shows the seconds elapsed or remaining depending on mode setting.
8. FRAMES: The CD Player breaks down a second into 75 frames for accurate cueing. This shows the frames
elapsed or remaining depending on mode setting.
9. AUTOSTART: will light when the unit is set to relay from CD unit to CD unit.
10. CONTINUOUS PLAY: Shows when the unit is set to play back the entire CD without stopping between
tracks.
11. SINGLE PLAY: Shows when the unit is set to play just one track at a time.
12. CD IN: indicates a CD is in the unit.
13. TIME BAR: Shows either track elapsed time, remaining track time, or remaining total time depending on the
setting of the “time” button.
TIME MODE:
14. REMAIN indicates when track remain time is displayed.
15. TOTAL indicates when total CD remain time is displayed.
note: both indications will not be lit when the unit is showing “elapsed” time
16. SEARCH: indicates when the unit is searching through the music.
17. PITCH DISPLAY: indicating current pitch.
18. PROGRAM: Indicates when a track sequence has been programmed in the memory.
19. MP3 (MPCD3 only): Indicates when an MP3 CD is in the drawer.
- The Leader in DJ Technology
©2002 Numark Industries
- 9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
CDN15/MPCD3
MP3 AUDIO (MPCD3 only)
While playing MP3 music, please note the following points.
It is assumed that the user of this unit understands how to properly burn a CDR and add MP3 files
to it. Many different variations MP3 audio are available from various sources and computer
programs. Please read the following to better understand how your unit will work with MP3 files.
1. Playback of VBR (variable bit rate) MP3 files is not possible on this unit. Only standard CBR
(constant bit rate) files may be played.
2. The time display for the MP3 files may not be precise due to the inherent nature of compressed
audio.
3. Cue points can not be set on MP3 audio. When MP3 files are played and “CUE” is pressed the
music will return to the beginning of the track and pause. MP3 audio lacks the time code feature
of regular CD Audio that allows for cue point setting.
4. Track sorting conforms to ISO9660 standards, but not all programs in conformity with this
standard. The playing order may be different with the burning order. Folders will be sorted first
followed by the tracks within similar to a computer system alphabetical file sort.
For example, The disc is burned with following tracks.
1ab, 2bc, 3cd, 4de, 10jk, 11kl, 20mn, 31no
Due to different burning program formats, the playing order is different as below.
• Conformable to ISO9660, the playing order is
1ab -> 2bc -> 3cd -> 4de -> 10jk -> 11kl -> 20mn ->31no
• Unconformable to ISO9660
1ab -> 10jk -> 11kl -> 20mn -> 2bc -> 31no -> 3cd -> 4de
5. If the ID3 (data area) in your MP3 includes photos, then you may not be able to play the track.
6. If the over-sampling frequency of the MP3 music is not 44.1KHz, then the PITCH CONTROL will
not work.
7. If the disc is burned with both MP3 and CDDA (Digital Audio) music, then it will be recognized
according to the first track. For example, if the first track is CDDA music the unit will play CDDA
music only.
- The Leader in DJ Technology
©2002 Numark Industries
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download.
CDN15/MPCD3
DESCRIPTION OF THE PLAY/PAUSE AND CUE OPERATIONS
PLAY and CUE
Pressing the “PLAY/PAUSE” button starts the disc. Pressing the “CUE” button will reset the disc to the last place
where the disc was started. This is called the cue point. By alternately pressing the “PLAY/PAUSE” button and the
“CUE” button, the disc may be returned and played from the cue point any number of times. This function is called back
cue.
PLAY, PAUSE and CUE
When Play is paused and then started again, the return position for the back cue will be updated as the new cue
point
EDITING CUE POINT
When the jog wheel is turned while a cue point is set, a new cue point can be located. The CD player will
repeatedly play small parts of the CD as you move it to the desired position. By pressing “PLAY/PAUSE” then “CUE” you
can confirm that this new cue point is desirable.
- The Leader in DJ Technology
©2002 Numark Industries
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
CDN15/MPCD3
MATCHING THE BEATS PER MINUTE (BPM)
Match the tempo by monitoring the music of two CD Players by ear and adjusting the pitch. When the tempo of
the music of the selected CD player is slow compared to the tempo of the other player, move the slider to the “+” side and
match the tempo. When faster, move the pitch slider to the “-“ side. The following description is for the case of matching
the pitch of PLAYER 2 to the pitch of the music being played on PLAYER 1.
Press PLAY/PAUSE to start PLAYER 1
PLAYER 1 is playing
Press PLAY/PAUSE to start PLAYER 2
Both CD players are playing discs.
Listen to PLAYER 2 in your headphones
When PLAYER 2 is fast
compared to PLAYER 1
slow down PLAYER 2
When PLAYER 2 is slow
compared to PLAYER 1
speed up PLAYER 2
MATCHING BEATS USING PITCH BEND
If you find the BPM’s (Beats Per Minute or Tempos) are the same, however, the drumbeats are not matched you
will need to temporarily change the pitch. This description is for the case of matching the beat of PLAYER 2 to the beat of
the music being played on PLAYER 1. (This procedure can be done on either PLAYER).
After matching the BPM’s adjust the pitch temporarily as follows:
When PLAYER 2 is behind rotate the jog wheel
clockwise to bend pitch faster
When PLAYER 2 is ahead rotate the jog wheel counter
clockwise to bend pitch slower.
The pitch changes automatically while the jog wheel is rotated. The faster you rotate the wheel the more you change.
Releasing the wheel results in a return to the original pitch. (So the BPM’s are once again the same)
- The Leader in DJ Technology
©2002 Numark Industries
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
CDN15/MPCD3
EXAMPLE OF MIXING USING TWO CD PLAYERS
While playing a disc on PLAYER 1 load a disc into PLAYER 2 and select your next track, match its
pitch to the track playing on PLAYER1 and when you are ready use the crossfader on your mixer to fade from
PLAYER 1 to PLAYER 2.
PLAYER 1
PLAYER 1
PLAYER 1
Load a disc in PLAYER 1
and select the track and
press PLAY.
Load a disc and press the
OPEN/CLOSE button.
Select the track to be
played.
Press the PLAY button
PLAYER 2
PLAYER 2
PLAYER 2
Load a disc in PLAYER 2
and select the track then
play.
Load a disc and press the
OPEN/CLOSE button.
Select the track to be
played.
Press the PLAY button
PLAYER 2
PLAYER 2
PLAYER 2
Set and edit a start cue
point on PLAYER 2
Press the Pause button of
PLAYER 2.
Press search and rotate
wheel to rapidly look for a
cue point.
Press search to release.
Slowly set the right cue
point using the jog wheel.
Check you new cue point
PLAYER 2
PLAYER 2
PLAYER 2
Listen with the monitor and
press the play button.
Press the cue button then
play to be sure of the set
cue point.
Set the player to the Cue
point by pressing Cue
Do a MIX!
PLAYER 2
PLAYER 2
MIXER
When you are happy with
you mix adjust you mixer
accordingly.
With a matching downbeat
from Player 1 press the
play button.
If you are beat mixing turn
on your Pitch adjust and
follow the directions for
beat matching.
- The Leader in DJ Technology
©2002 Numark Industries
- 13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
CDN15/MPCD3
BEFORE SWITCHING OFF THE POWER:
When you have finished using the CD player, be sure that the disc tray is closed with the “OPEN/CLOSE” button before
switching off the power.
Switch off the power after the
disc holder has been closed
with the “OPEN/CLOSE” button
DO NOT switch off the power when
the disc holder is open.
TROUBLESHOOTING:
Symptom
Possible Cause
Corrective Action
The power fails to switch on when the
POWER switch is set to on
Poor power plug connection at the AC
outlet or IEC Power cord loose from
rear of unit
Insert the power plug firmly into the AC
outlet and make sure connection is
good in unit rear
Disc play does not start
The disc is loaded upside down
The disc is too dirty
Reload the disc with the label side up
Clean the disc
No sound
Improper output cable connections
Improper amplifier operation
Connect the output cables correctly
Check amplifier setup
Sound skips
The CD player is subject to vibrations
or physical shock
Change the installation location
The disc is too dirty
Clean the disc
Hum
Loose cable connections
Firmly connect all audio plugs
- The Leader in DJ Technology
©2002 Numark Industries
- 14 -
Download from Www.Somanuals.com. All Manuals Search And Download.
CDN15/MPCD3
SPECIFICATIONS
TECHNICAL
Disc Type:
Time Display:
Standard Compact discs (12 cm & 8 cm)
Track Elapsed, Track Remain, or Total Remain
Quantization:
1 bit linear/Channel, 3 Beam Laser
8 Times
44.1 kHz
20 Hz to 20 kHz
Less Than 0.005%
> 90 dB
Oversampling rate:
Sampling Frequency:
Frequency response:
T.H.D. + NOISE:
S/N ratio (IHF-A):
Dynamic range:
Output level:
> 90 dB
2 Volts R.M.S.
within 0.015-0.03 seconds
within 0.015 seconds
+/- 8, 16% slider
16%
Start Time:
Start Time (MPCD3):
Pitch control range:
Pitch bend:
Digital Output (MPCD3): type 2, form 1, S/PDIF (Sony/Phillips Digital Interface Format)
GENERAL
Dimensions:
18.98” x 3.48” x 10.11” (482 x 88.5 x 257mm)
Weight:
18.04 lbs. (8.2 kg)
115/230V AC, 50/60Hz
20W
Power Supply:
Power Consumption:
* Specifications are subject to change due to ongoing improvements
- The Leader in DJ Technology
©2002 Numark Industries
- 15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
®
Professional Disc Jockey Products
LIMITED PRODUCT WARRANTY
1. What is covered and for how long? NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that NUMARK'S DJ Mixers, Amplifiers, CD
players, turntables, preamplifiers, beatkeepers, equalizers, microphones, headphones, and all other accessories are free from defects in material and
workmanship under normal use and service for the period commencing upon the date of purchase from an authorized NUMARK dealer and continuing for the
following period of time after that date for (1) Year.
2. What is not covered? This Limited Warranty is conditioned upon proper use of the product by the purchaser.
This Limited Warranty does not cover: (a) defects or damage resulting from accident, misuse, abuse, neglect, unusual physical or electrical stress, modification
of any part of the product, or cosmetic damage; (b) equipment that has the serial number removed or made illegible; (c) all plastic surfaces and other externally
exposed parts that are scratched or damaged due to normal use; (d) defects or damage from improper testing, operation, maintenance, installation, adjustment,
or service of the mixers; (e) crossfaders.
3. What are NUMARK'S obligations? During the applicable warranty period, NUMARK will repair or replace, at NUMARK'S sole discretion, without charge to the
purchaser, any defective component part of the mixer. To obtain service under this Limited Warranty, purchaser must first contact NUMARK and obtain a return
authorization number ("RA#"). Purchaser must then return the mixer to NUMARK in an adequate container for shipping, accompanied by purchaser's sales
receipt or comparable proof of sale showing the date of purchase, the serial number of the product, and the seller's name and address. To obtain an RA# and
assistance on where to return the mixer, contact NUMARK customer service at 401-295 9000. Upon receipt, NUMARK will repair or replace the defective
products. NUMARK may, at NUMARK'S sole discretion, use rebuilt, reconditioned, or new parts or components when repairing any product or replace a
product with a rebuilt, reconditioned or new product. Repaired mixers will be warranted for a period equal to the remainder of the original Limited Warranty on
the original mixer or for (90) days, whichever is longer. All replaced parts, components, boards and equipment become the property of NUMARK. If NUMARK
determines that any mixer is not covered by this Limited Warranty, purchaser must pay all parts, shipping, and labor charges for the repair or return of such
mixer.
4. What are the limits on NUMARK'S liabilities? THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY, TOGETHER WITH ANY IMPLIED WARRANTIES
COVERING NUMARK MIXERS, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, NUMARK
SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES, LOSS OF PROFITS, DAMAGES TO
PURCHASER'S PROPERTY, OR INJURY TO PURCHASER OR OTHERS ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE ANY NUMARK
MIXER, BREACH OF WARRANTY, OR NEGLIGENCE, INCLUDING BUT NOT LIMITED TO NUMARK'S OWN NEGLIGENCE, EVEN IF NUMARK OR ITS
AGENT HAS BEEN ADVISED OF SUCH DAMAGES, OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. THIS LIMITED
WARRANTY IS THE COMPLETE WARRANTY FOR NUMARK'S MIXERS, AND IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. THIS
LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL
ILLEGALITY OR UNENFORCEABILTY SHALL NOT AFFECT THE ENFORCEABILITY OF THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
This Limited Warranty allocates risk of product failure between purchaser and NUMARK, and NUMARK'S product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited Warranty. The agents, employees, distributors, and dealers of NUMARK are not authorized to make modifications
to this Limited Warranty, or make additional warranties binding on NUMARK. Accordingly, additional statements such as dealer advertising or presentation,
whether oral or written, do not constitute warranties by NUMARK and should not be relied upon.
5. How does state law apply to this warranty? SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES OR HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO PURCHASER.
6. This Limited Warranty gives you specific legal rights. You may also have other rights, which vary from one jurisdiction to another.
RETURN INFORMATION
•
•
•
•
A Return Authorization number must be obtained from Numark through the address or phone numbers below.
A copy of the original sales receipt must also be included for the equipment to be repaired under warranty.
The faulty equipment must be packed in its original packaging.
One additional outer layer of packaging must be included to ensure product safety. Failures to do so may inadequately protect the equipment in transit
and, therefore, jeopardize the customer’s warranty.
•
•
Numark will not accept COD shipments and no call tags will be issued for merchandise return.
Numark will not return repaired merchandise to customers by priority service, unless by written request at the customer’s cost. Requests must be
submitted in writing with merchandise returned.
•
The defective Numark equipment should be sent, FREIGHT PREPAID with Return Authorization number clearly printed on the outer packaging and
original sales receipt enclosed to:
INDUSTRIES
Attention: Service Department
11 Helmsman Avenue
Phone: +1 (401) 295-9000
Fax:
+1 (401) 295-5200
Web:
North Kingstown, RI 02852 USA
Download from Www.Somanuals.com. All Manuals Search And Download.
|