Enterprise Edge Voice Messaging
Reference Guide
1-800-4 NORTEL
www.nortelnetworks.com
© 1999 Nortel Networks
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Contents
Assigning message delivery options using the Open Mailbox feature
45
Assigning message delivery options using the Leave Message feature
46
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents 5
Transferring a mailbox owner’s call to Enterprise Edge Voice
Messaging 56
Programming an Outbound Transfer telephone number when Enterprise
Edge Voice Messaging is behind PBX or Centrex+ 60
Changing the destination type from a pager to a telephone or extension
74
Setting up Off-premise Message Notification to more than one destination
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Contents
DTMF tone commands for setting up Off-premise Message Notification
89
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use this guide
1
Introduction
Use the Enterprise Edge Voice Messaging Reference Guide with the Enterprise
Edge Voice Messaging Quick Reference Guide. The Enterprise Edge Voice
Messaging Reference Guide gives you detailed information about using the
Enterprise Edge Voice Messaging system.
This chapter describes:
•
•
•
How the Enterprise Edge Voice Messaging Reference Guide is
organized
The Enterprise Edge Voice Messaging Reference Guide contains the following
chapters:
Chapter
Description
Describes the contents and conventions of this guide.
Describes Enterprise Edge telephones, how Alternate sets
work, Enterprise Edge ATA 2, entering characters on the
Enterprise Edge dialpad, Enterprise Edge Voice
Messaging voice prompts, the Automated Attendant,
types of mailboxes and exiting Enterprise Edge Voice
Messaging.
Shows how to initialize and open your mailbox. Explains
passwords, the Company Directory and Assigning a
Target Attendant.
5. Greetings
Describes feature codes and mailbox options.
Describes Primary, Alternate, Personalized and
Information mailbox greetings. Shows how to record and
choose greetings.
Describes Receiving Calls, the Enterprise Edge Voice
Messaging Never Full mailbox feature, listening to your
mailbox messages, and Call Screening.
Explains types of messages, using the Company
Directory, message delivery options, recording and
sending a message, replying to messages and how to send
a message to more than one recipient.
Describes Call Forwarding your calls.
Describes transferring calls and Outbound Transfer.
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
8 How to use this guide
Chapter
Description
Explains what Off-premise Message Notification is and
shows how to set up and change Off-premise Message
Notification.
Describes the Call Record feature.
Provides suggestions for the optimal use of Enterprise
Edge Voice Messaging.
Provides helpful procedures for problems that might
occur while operating Enterprise Edge Voice Messaging.
Provides a list of default values and tone commands.
Index
Defines terms used in this guide.
Provides an alphabetical list of information contained in
this guide.
Conventions and symbols used in this guide
The following conventions and symbols are used for describing features and their
operation:
Convention
Example
Used for
Word is in a special font (shows
top line of display)
Pswd:
Command line prompts. Used on Enterprise Edge
one line and two line display telephones.
Underlined word in capital letters PLAY
(shows bottom line of a two-line
display telephone)
Display button option. Available only on Enterprise
Edge two line display telephones. You can press the
button directly below the option on the display to
proceed.
Dialpad buttons
£
Represents the buttons you press on the dialpad to
select a particular option.
Prerequisites
If you are a new user, make sure you are familiar with how to operate Enterprise
Edge single-line and two-line display telephones. Refer to Enterprise Edge
with your telephone.
For more information about Enterprise Edge Voice Messaging, ask your System
Administrator.
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Enterprise Edge Voice Messaging
2
Introduction
Enterprise Edge Voice Messaging works with the Enterprise Edge system to
provide an automated receptionist service. Enterprise Edge Voice Messaging
answers incoming calls, routes them to extensions and mailboxes in the system, and
provides message taking capability.
This chapter describes:
•
•
•
•
•
•
•
Enterprise Edge telephones
Enterprise Edge one line display telephones
You can use Enterprise Edge one line display telephones for most Enterprise Edge
Voice Messaging sessions. If you are a using an Enterprise Edge one line display
telephone, the display shows the Enterprise Edge Voice Messaging display
command line. The Enterprise Edge one line display telephone does not show the
display button options.
On an Enterprise Edge one line display telephone, all options are given immediately
by the voice prompts. You make selections using the dialpad only. You do not need
to wait for the voice prompt to complete the option list. You can interrupt the voice
prompt and make your selection immediately.
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 0 Using Enterprise Edge Voice Messaging
Enterprise Edge two line display telephones
Enterprise Edge two line display telephones show you Enterprise Edge Voice
Messaging commands and options. All system administration tasks, such as setting
up a Group List, require a two-line display telephone.
Enterprise Edge two line displays can show up to three display button options at a
time. In cases where there are more options, wait for the voice prompt to state the
other available options. If you know the corresponding dialpad number for the
option you want, you can press it any time during the voice prompt.
Press • to return to the previous display prompt.
An example of the Enterprise Edge Voice Messaging two-line display is shown in
Enterprise Edge two line display
Display command line
Display button options
Pswd:
OTHR
RETRY
OK
Display buttons
Alternate extensions
You can have up to two Alternate extensions for your mailbox. If a caller dials the
main extension (an extension that has Alternate extensions assigned), the call rings
only at the main extension.
If the call is not answered and a message is left, a message indicator appears at the
main extension and at the Alternate extension(s). You can access the message from
the Alternate extension(s) with ƒ·°⁄, the same way that you usually
access messages from your main extension telephone.
If an Alternate extension is assigned to a telephone that has Caller ID (CLID) and
Display Caller enabled, CLID information displays and an audible tone occurs at all
telephones when the call goes to Enterprise Edge Voice Messaging. (For
on page 52.) The message can be intercepted using the Interrupt Feature,
ƒ·°‡, at all telephones as long as the caller is still leaving a
message.
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Enterprise Edge Voice Messaging 1 1
Enterprise Edge ATA 2
You can use a single-line Enterprise Edge telephone for most Enterprise Edge
Voice Messaging sessions. However, you cannot use a single-line telephone
attached to an Enterprise Edge ATA 2 for Enterprise Edge Voice Messaging
System Administration tasks.
There is no Message Waiting Notification when you are using an Enterprise Edge
ATA 2.
Although a single-line telephone does not have a feature button, you can access
Enterprise Edge Voice Messaging features.
To access Enterprise Edge Voice Messaging features, such as the Leave Message
feature or the Open mailbox feature, call Enterprise Edge Voice Messaging and
follow the voice prompts. You can determine the Enterprise Edge Voice Messaging
extension by pressing ƒ·°fi on an Enterprise Edge telephone.
You can also press:
•
•
˚•·°⁄ to open your mailbox
or
˚•·°‚ to leave a message, and follow the voice prompts.
Entering characters on the Enterprise Edge dialpad
The buttons on your Enterprise Edge telephone dialpad act as both numbers and
letters. Each button represents a number and also represents letters of the alphabet.
You can enter a maximum number of 16 characters on the command line of the
Enterprise Edge dialpad. The display shows 16 characters at a time. The prompt
remains on the display if you enter fewer than ten characters.
If you are entering information where the prompt and the information is fewer than
16 characters, you can see both the prompt and the information you entered.
An example of a display with fewer than 16 characters, where the command line
prompt remains on the display is the Pswd command line prompt.
Pswd:1111
OTHR RETRY OK
The prompt disappears for the following command line prompts:
•
•
•
Name:
Log:
Dest ph:
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 2 Using Enterprise Edge Voice Messaging
For instance, the following display shows the Name: command line prompt:
Name:
RETRY
BKSP
OK
When you begin to enter the last name, the Name: command line prompt disappears.
For example, if you are entering the name Partridge, you press the dialpad button
‡ for P, and the display drops the Name: prompt.
P
RETRY
BKSP
OK
The command line prompt is still not shown on the display after you enter the entire
name, although the name is only nine characters.
PARTRIDGE
RETRY
BKSP
OK
Enterprise Edge Voice Messaging voice prompts
All Enterprise Edge telephones provide voice prompts.
The voice prompt tells you the dialpad button to press to use different Enterprise
Edge Voice Messaging options. Voice prompts provide the same options as display
buttons. Prompts also provide options that do not appear on the display. If you are
using an Enterprise Edge two line display telephone, you can use either the display
button or the dialpad button to access the option.
On an Enterprise Edge one line display telephone the voice prompt plays
immediately. If you do not choose an option after five seconds, the voice prompt
replays the options. If you still do not choose an option, Enterprise Edge Voice
Messaging ends the session.
On an Enterprise Edge two line display telephone the voice prompt plays after a
five-second delay. If you do not choose an option, Enterprise Edge Voice
Messaging ends the session.
Interrupting a voice prompt
You can interrupt a voice prompt by selecting any option on the display or dialpad.
You can also interrupt a voice prompt by pressing £. You cannot interrupt a voice
prompt that is informing you of an error.
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Enterprise Edge Voice Messaging 1 3
Automated Attendant
The Automated Attendant acts as a receptionist for incoming calls. When enabled,
the Automated Attendant answers your company’s incoming telephone lines
depending on the time of day. If callers know which option they want, they can
interrupt the Automated Attendant by entering their selection on the dialpad of any
tone-dial telephone.
The Automated Attendant provides callers with voice prompt commands associated
with each of the following options:
•
•
•
•
•
•
entering a mailbox number
entering the extension
using the Company Directory
leaving a message
reaching the Operator
selecting an Alternate Language* (not a voice prompt)
* If your Enterprise Edge Voice Messaging system is installed with bilingual
capabilities, the caller can press · to listen to the Automated Attendant in the
Alternate Language.
When a caller selects an option, the Automated Attendant responds to the command
either by routing the call to an extension or mailbox within your company, or
directing the caller to the Company Directory or the Operator.
The caller listens and then enters the option they want to use.
Types of mailboxes
A mailbox is a storage place for messages. A Enterprise Edge Voice Messaging
system can have up to 1,000 mailboxes. There are three types of mailboxes:
•
•
•
Personal
Information
Special
Most users have personal mailboxes.
Personal mailbox
A personal mailbox is assigned by the System Administrator and is maintained by
the mailbox owner. A personal mailbox can be a user or a guest mailbox.
User mailbox
A user mailbox can be assigned to each mailbox owner who has an operating
Enterprise Edge extension.
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 4 Using Enterprise Edge Voice Messaging
Guest mailbox
Guest mailboxes provide temporary employees and guests with access to internal
messaging and call routing features. Guest mailboxes do not have an operating
extension. They are assigned a number that looks and works like an extension. This
allows the guest mailbox owner to access Enterprise Edge Voice Messaging the
same way a mailbox owner accesses their mailbox from another extension or
telephone. If you need a guest mailbox, request one from the System Administrator.
Information mailbox
An Information mailbox is designed to provide an informative message to a caller.
These mailboxes do not have an operating Enterprise Edge extension, and the caller
cannot leave a message in them. A voice prompt provides a caller with access to
Information mailboxes. An Information mailbox is reached through the Automated
Attendant, Custom Call Routing (CCR) or the Operator. For more information,
Information mailboxes are created by the System Administrator, and are maintained
by either the System Administrator or a mailbox owner.
Special mailboxes
Special mailboxes are set up automatically when the Enterprise Edge Voice
Messaging system is initialized.
The Special mailboxes include:
•
•
General Delivery mailbox
System Administrator mailbox
General Delivery mailbox
The General Delivery mailbox is used:
•
•
•
to collect messages from callers who use a rotary dial telephone
for individuals in your company who do not have personal mailboxes
for mailbox owners whose mailboxes are full. For more information, refer to the
The receptionist or System Administrator sends messages left in the General
Delivery mailbox to the appropriate mailbox owner. For more information about
the General Delivery mailbox, refer to Default mailbox numbers for the General
System Administrator mailbox
This mailbox is used by your System Administrator as a personal mailbox. You can
leave messages for your company’s System Administrator in this mailbox.
Ask your System Administrator for the mailbox number.
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up your mailbox
3
Introduction
This chapter shows you how to set up your mailbox and describes the following
topics:
•
•
•
•
•
Initializing your mailbox
Initializing your mailbox prepares your mailbox to receive messages. Your mailbox
cannot receive and store messages until it is initialized.
Initializing your mailbox involves:
•
•
choosing a password from four to eight digits long that does not start with zero
changing the Enterprise Edge Voice Messaging default password to your new
password
•
To initialize your mailbox, follow the steps in Initializing and opening your mailbox
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 6 Setting up your mailbox
Initializing and opening your mailbox for the first time
To initialize and open your mailbox for the first time:
1. Press ƒ·°⁄.
2. Press ‚‚‚‚ (the default password) and press
Pswd:
OTHR
RETRY
OK
OK or £.
Note: If you are at another Enterprise Edge set, press
OTHR or • to access the Log: display prompt.
From the Log: prompt, enter your mailbox
number and password as a continuous number.
Your mailbox number is normally the same as
your extension. Your default password is
‚‚‚‚.
3. This display appears briefly to indicate that you must
change your password.
Must change pswd
4. Choose a password from four to eight digits long that
does not start with zero. Enter your new mailbox
password and press OK or £.
Pswd:
RETRY
OK
5. Enter your new mailbox password again and press OK
Again:
RETRY
OK
OK
or £.
6. At the tone, record your name in the Company
Directory. Press OK to end your name. Press RETRY or
¤ to erase and re-record your name.
Record name:
RETRY
Note: Include your mailbox number in your
Company Directory recording. For example
“Paul Wayne, mailbox 5813”.
7. Press OK or £ to accept the recording. Press PLAY or
⁄ to listen to the recording. Press RETRY or ¤ to
erase and re-record your name.
Accept name?
RETRY
PLAY
OK
8. Press ® to end the session.
0 new 0 saved
PLAY REC
ADMIN
After your mailbox is initialized, record your Personal mailbox greetings. If you do
not record any Personal greetings, your Company Directory name recording plays
to callers who reach your mailbox.
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up your mailbox 1 7
Opening your mailbox
You can open your mailbox from:
your own extension
another Enterprise Edge Voice Messaging extension
•
•
•
Opening a mailbox after it is initialized
This section describes how to open:
•
•
•
your mailbox from your own telephone
your mailbox from another Enterprise Edge extension
a Guest mailbox
After a mailbox is initialized, follow these steps to open it:
1. Press ƒ·°⁄.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
Note: If you are at another Enterprise Edge
extension, or if you are using a Guest mailbox,
press OTHR or • to access the Log: display
prompt. From the Log: prompt, enter your
mailbox number and password as a continuous
number. Your mailbox number is normally the
same as your extension.
Opening your mailbox remotely
If you are calling your Enterprise Edge Voice Messaging mailbox from an outside
telephone, press •• during your greeting to open your mailbox. At the voice
prompt, enter your mailbox number, password and press £. Follow the voice
prompts.
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1 8 Setting up your mailbox
Mailbox Password
Your password is from four to eight digits long and cannot start with zero. When
you initialize Enterprise Edge Voice Messaging, the default mailbox password is
four zeros (0000). You are prompted to change this password.
It is recommended that you change your password every 30 days. By changing your
password regularly, you decrease the chance that someone will discover your
password and gain access to your system.
Keep a written copy of your password in a safe place, and avoid giving it to your
co-workers. Your mailbox password is used to keep your voice messages private
and confidential. For security reasons, it is a good idea to choose an uncommon
password (not a predictable password like 1234 or 1111). If someone else knows
your password, they can access your mailbox and listen to or delete your messages.
They can also access your Enterprise Edge Voice Messaging system and use it
fraudulently or disrupt service.
Changing your mailbox password
You can change your mailbox password at any time. Remember to choose a
password from four to eight digits long that does not start with zero.
To change your password:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
3. Press ADMIN or °.
0 new 0 saved
PLAY REC
ADMIN
4. Press PSWD or ›.
Mailbox admin
GREET PSWD QUIT
5. Enter your new mailbox password and press OK or £.
Pswd:
RETRY
OK
OK
6. Enter your new mailbox password again and press OK
Again:
RETRY
or £.
7. Press ® to end the session.
Mailbox admin
GREET PSWD QUIT
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up your mailbox 1 9
Company Directory
The Company Directory is a list of mailbox owners on the Enterprise Edge Voice
Messaging system. Before your mailbox can be used to receive messages, you must
record your name in the Company Directory. It is a good idea to include your
mailbox number in your Company Directory recording. For example “Paul Wayne,
mailbox 5813”.
This establishes your “voice” name in a directory that is used by other Enterprise
Edge Voice Messaging users and outside callers who use the Company Directory.
If you do not want your name in the Company Directory, ask your System
Administrator. The Company Directory feature can be disabled by the System
Administrator. If you are unsure whether or not you have this feature, ask your
System Administrator.
Recording or changing your name in the Company Directory
Names included in the Company Directory can be changed at any time.
To change your name in the Company Directory:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
3. Press ADMIN or °.
0 new 0 saved
PLAY REC
ADMIN
4. Press ⁄.
Mailbox admin
GREET PSWD QUIT
Note: This is a voice prompt option. It does not
appear as a display button option on a two-line
display telephone.
5. At the tone, record your name. Press OK or £ to end
your recording. The recording of your name is
automatically placed in the Company Directory.
Record name:
RETRY
OK
OK
6. Press OK or £ to accept your recording. Press PLAY
or ⁄ to listen to the recording. Press RETRY or ¤ to
erase and re-record your name in the Company
Directory.
Accept name?
RETRY
PLAY
7. Press ® to end the session.
Mailbox admin
GREET PSWD QUIT
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
2 0 Setting up your mailbox
Assigning a Target Attendant
The person that you assign to answer your telephone is your Target Attendant.
After you assign your Target Attendant, a caller who reaches your mailbox can
press ‚ to speak with the Target Attendant. If the Target Attendant does not
answer, the call goes to your mailbox. If your personal mailbox is not available, the
call goes to the General Delivery mailbox.
Remember to tell callers in your greetings that if they need assistance they can press
‚ to speak to Target Attendant. For example, “Please press ‚to speak to my
assistant.” The Target Attendant can be any valid extension. The default Target
Attendant is the person assigned as the Enterprise Edge Voice Messaging Operator.
To assign your personal Target Attendant:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
3. Press ADMIN or °.
0 new 0 saved
PLAY REC
ADMIN
4. Press fi.
Mailbox admin
GREET PSWD QUIT
5. Press CHNG or ⁄ to change the Target Attendant. The
Atdt ext:oper prompt indicates that the current
Target Attendant is the Enterprise Edge Voice
Messaging Operator.
Atdt ext: oper
CHNG
QUIT
OPER
QUIT
6. Enter the extension number of your new Target
Attendant. Press OPER or ‚ to change the Target
Attendant back to the Enterprise Edge Voice
Messaging Operator.
Ext:
RETRY
7. The Atdt ext:xxx prompt appears, where xxx
represents the extension you entered. Press QUIT to
accept the number of the Target Attendant. Press CHNG
or ⁄ to change the Target Attendant.
Atdt ext: <xxx>
CHNG
Press ® to end the session.
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature codes and mailbox options
4
Introduction
This chapter describes the Enterprise Edge Voice Messaging feature codes and
mailbox options, and includes the following topics:
•
•
•
•
Feature codes
Enterprise Edge Voice Messaging feature code.
Feature codes are assigned during installation. The feature codes in this guide are
the default feature codes. If your company is using custom feature codes, you need
to find out what the custom feature codes are. To determine the Enterprise Edge
Once you know the feature codes that your company is using (default feature codes
or custom feature codes), you can program the feature codes onto memory buttons.
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
2 2 Feature codes and mailbox options
Feature Code Name
Default feature code
Description
Leave Message
ƒ·°‚
Leaves a message in a mailbox. No password
is required.
Open Mailbox
Operator Status
ƒ·°⁄
Opens your Personal mailbox to listen to your
messages and access Enterprise Edge Voice
Messaging options. Your personal password
is required.
ƒ·°¤
Not a user feature. Used by the System
Administrator, receptionist, or Operator to set
the Operator Status.
Call Forward to
Enterprise Edge Voice
Messaging
ƒ·°›
Forwards incoming calls to Enterprise Edge
Voice Messaging.
Enterprise Edge Voice ƒ·°fi
Messaging extension
Determines the Enterprise Edge Voice
Messagingextension. You need to know what
the Enterprise Edge Voice
Messagingextension is when you forward
your extension to Enterprise Edge Voice
Messaging.
Transfer
Interrupt
ƒ·°fl
Transfers calls to a mailbox.
ƒ·°‡
Interrupts Enterprise Edge Voice Messaging
when a caller is listening to your personal
mailbox greeting or leaving a message. This
allows you to speak with a caller who has
reached your mailbox. (Refer to the Note that
follows this table.)
Call Record
ƒ·°·
Records a telephone call from your
Enterprise Edge telephone. The resulting
message is left in your mailbox.
Note: When a caller leaving a message in a mailbox is interrupted, the part of the
message that is recorded before the interruption remains in the mailbox.
Delete this message. If Off-premise Message Notification is turned on, the
interrupted message causes Enterprise Edge Voice Messaging to call the
Off-premise Message Notification number immediately. For information on
Off-premise Message Notification, refer to About Off-premise Message
If Outbound Transfer is turned on, you cannot interrupt the call unless you
interrupt it before the caller transfers to your Outbound Transfer destination
number by pressing ‡. For information on Outbound Transfer, refer to
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature codes and mailbox options 2 3
Determining custom feature codes
If your company is using custom feature codes, find out what the custom feature
codes are. To determine the Enterprise Edge Voice Messaging custom feature
codes, use an Enterprise Edge two line display telephone.
To determine the Enterprise Edge Voice Messaging feature codes:
1. Press ƒ·•⁄.
Leave msg: F9xx
NEXT
2. The name and numerical code of the first feature, the
Leave Message feature, is shown on the display. The
xx represents a number between 00 and 99. Record the
custom feature code for the Leave Message feature in
Open mbox: F9xx
NEXT
3. The display shows the name and numerical code of the
Open Mailbox feature. Record the feature code for the
Open Mailbox feature in the appropriate column in the
NEXT.
4. Continue pressing NEXT to show all of the Enterprise
Edge Voice Messaging feature codes and record them
Interrupt: F9xx
QUIT
5. This display is shown when you reach the last
Enterprise Edge Voice Messaging feature code, the
Interrupt feature code. Press QUIT or ® to end the
session.
After you have determined the custom feature codes, make sure that you record the
custom feature codes in the appropriate column.
Table 1 Description of feature codes
Feature Code name
Leave Message
Open Mailbox
Default feature code
Custom feature code
ƒ·°‚ ƒ· ___ ___
ƒ·°⁄ ƒ· ___ ___
ƒ·°¤ ƒ· ___ ___
ƒ·°› ƒ· ___ ___
Operator Status
Call Forward to Enterprise Edge Voice
Messaging
Transfer
ƒ·°fl ƒ· ___ ___
ƒ·°‡ ƒ· ___ ___
ƒ·°· ƒ· ___ ___
Interrupt
Record Call
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
2 4 Feature codes and mailbox options
Programming a memory button with a feature code
Each Enterprise Edge Voice Messaging feature code can be programmed to a single
memory button.
To program a memory button:
1. Do not lift your handset. Press ƒ•‹.
Program Features
2. The transient display displays Program Features.
3. Press a programmable button.
4. Press ƒ.
Press a button
QUIT
Feature code:
QUIT
F_
QUIT
5. Enter the feature code number you want to program.
For example, enter ·°‚ to program the Leave
Message feature code. For a list of frequently used
feature codes, refer to the table Description of feature
CLEAR
Programmed
The display shows that the button has been
programmed.
Repeat steps 1 to 5 for each Enterprise Edge Voice
Messaging feature code you want to program.
Use one of the paper labels that came with your Enterprise Edge telephone to
identify the programmed button. To use the feature, press the labeled button.
Mailbox options
To access the mailbox administration menu, refer to Mailbox Administration menu
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature codes and mailbox options 2 5
Main Mailbox menu and options
To access the main mailbox menu:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
3. The main mailbox menu options appear. Choose one
of the options shown in the table below.
0 new 0 saved
PLAY REC
ADMIN
Table 2 Main Mailbox Options
Display Button Task Description
Button
Found on Page
PLAY
REC
Listening to your mailbox messages (new messages).
¤
‹
fl
°
--
Listening to your mailbox messages (saved messages).
ADMIN
To change mailbox options. Refer to the Mailbox
--
--
To talk to an operator if an operator is available.
About the Automated Attendant.
--
‚
£
Mailbox Administration menu
To access the Mailbox Administration menu:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
3. Press ADMIN or °.
0 new 0 saved
PLAY REC
ADMIN
Mailbox admin
GREET PSWD QUIT
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
2 6 Feature codes and mailbox options
Table 3 Mailbox Administration Options
Display
Button
Button Task Description
Found on Page
--
⁄
¤
GREET
PSWD
--
›
fi
Assigning a Target Attendant. The Target Attendant
answers the call if a caller presses 0 during the call. The
Target Attendant overrides the Designated Operator.
--
fl
°
•
--
QUIT
Quitting the Mailbox Administration menu and
returning to the Main menu.
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Greetings
5
Introduction
This chapter describes the mailbox greetings and how to record them. This chapter
includes:
•
•
•
•
•
•
Types of mailbox greetings
The two types of greetings are:
•
Personal mailbox greetings (which include Primary, Alternate, and
Personalized greetings)
•
Information mailbox greetings
Personal mailbox greetings
Personal mailbox greetings play to callers who reach your mailbox. Greetings
inform callers that they have reached the correct mailbox and give callers any
necessary information or instructions. You can change the greetings at any time.
After you initialize your mailbox, you can record your greetings. If you do not
record any Personal greetings, your Company Directory name recording plays to
callers who reach your mailbox. Refer to Recording or changing your name in the
There are three types of Personal mailbox greetings: Primary, Alternate and
Personalized.
Recording technique for personal mailbox greetings
When you record your Personal greetings, remember to speak clearly and at a pace
that is easy to understand. After you record a greeting, you can replay it before you
accept it. You can record or change a greeting from any Enterprise Edge telephone
or, if you are away from the office, from any touch tone phone. When you record a
greeting, do not use the Handsfree feature. You have better results if you speak
directly into the handset.
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
2 8 Greetings
Primary mailbox greeting
Record your Primary mailbox greeting for everyday use. In this greeting include
your name and a brief message explaining to callers that you are unable to answer
their calls. For example:
“Hi. This is Paul Wayne. I’m not able to take your call right now. Please leave me
a message at the tone and I will return your call as soon as possible.”
If you are a new mailbox owner, record your Primary mailbox greeting
immediately.
Alternate mailbox greeting
The Alternate mailbox greeting is normally used for special circumstances. For
example:
“Hi. This is Paul Wayne. I am out of the office until Thursday, the 17th of
December. Although I am out of the office, I do check my mailbox daily. Please
leave me a message at the tone and I will return your call as soon as possible. Thank
you.”
After it is recorded, you must choose which greeting you want Enterprise Edge
Voice Messaging to play. You can change the selection at any time, and as often as
needed.
Personalized mailbox greeting
Personalized mailbox greetings are available only if your company subscribes to the
Caller ID (CLID) service from your local telephone company. For more
information about CLID, ask your System Administrator.
A Personalized mailbox greeting plays to callers based on the caller’s phone
number. Enterprise Edge Voice Messaging recognizes the assigned incoming
phone number and plays the Personalized mailbox greeting. For example:
“Hi Susan. I may have missed your call, but I don’t want to miss meeting you for
lunch. See you at noon.”
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Greetings 2 9
Information mailbox greetings
Information mailboxes greetings provide messages and announcements to callers.
A caller is automatically disconnected after listening to an Information mailbox
greeting. Information mailboxes can be used to:
•
•
•
announce sales
provide product lists
announce special events
For example:
“Paddy’s Dance Studio proudly presents an extravaganza of dance. The
entertainment begins at 8:00 p.m. on the fourth of July. Toddlers tap is in the White
Room. Folk dance is in the Green Room. Classical ballet is in the Pink Room.
Contemporary jazz is in the Blue Room. The Studio and Recital Rooms are located
at 222 Main Street.”
Make Information mailboxes easy for a caller to find. Do this by using your
company Operator or the Automated Attendant Company greetings to route the
caller. For details about Information mailboxes, ask your System Administrator.
Information mailboxes are different from Custom Call Routing (CCR) Information
Mailboxes. Callers must use the CCR Tree to access a CCR Information mailbox.
For more information about CCR Information Mailboxes, ask your System
Administrator.
Recording the Primary or the Alternate mailbox greeting
This procedure shows you how to record your Primary or Alternate mailbox
greetings. To start using Enterprise Edge Voice Messaging, only a Primary mailbox
greeting is necessary. If you do not record any Personal mailbox greetings, your
Company Directory name recording plays to callers who reach your mailbox.
If you record both Primary and Alternate mailbox greetings, you must choose which
greeting plays. If you do not choose a greeting, the Primary mailbox greeting
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3 0 Greetings
To record your Primary or Alternate mailbox greeting:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
Note: If you record a mailbox greeting from a
telephone that has not been assigned to your
Personal mailbox, press OTHR. The display
shows the Log: prompt. When this prompt
appears, enter your mailbox number and
password.
If you are using a single-line display telephone,
press • at the Pswd: prompt to show the Log:
prompt.
3. Press ADMIN or °.
4. Press GREET or ¤.
5. Press REC or ⁄.
0 new 0 saved
PLAY REC
ADMIN
Mailbox admin
GREET PSWD QUIT
Greeting options
REC CHOOSE
Greeting:
CFWD
PERS
6. Press PRIME or ⁄ to record the Primary mailbox
greeting. Press ALT or ¤ to record the Alternate
mailbox greeting.
PRIME
ALT
Note: If you are changing your greeting, your current
recorded Primary mailbox greeting begins to
play.
7. Press YES or ⁄ and record your greeting at the tone.
Record new?
YES NO
QUIT
8. Press OK or £ to end your recording.
Record greeting:
RETRY
OK
OK
9. Press OK or £ to accept the greeting. Press PLAY or
⁄ to listen to the greeting. Press RETRY or ¤ to
erase and re-record the greeting.
Accept greeting?
RETRY
PLAY
10. Press ® to end this session.
Mailbox admin
GREET PSWD QUIT
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Greetings 3 1
Choosing the Primary or the Alternate mailbox greeting
Primary mailbox greeting
You record a Primary mailbox greeting after initializing your mailbox. If you record
a Primary and an Alternate mailbox greeting, you need to choose which greeting
plays. If you do not choose a greeting, the Primary mailbox greeting plays
automatically.
Alternate mailbox greeting
If you choose the Alternate mailbox greeting, you are asked whether the mailbox
accepts messages. If you choose Y (yes) your mailbox receives messages in the
normal way.
If you choose N (no) the following occurs:
•
•
•
messages cannot be left in the mailbox
the Alternate mailbox greeting takes precedence over all other greetings
if a caller presses a button to cut the message short, they hear a voice prompt
that says this is a special greeting
•
if a caller presses a button to send a fax, the fax goes to the general delivery
mailbox (not your personal mailbox)
If you choose the Alternate mailbox greeting, remember to change back to the
Primary mailbox greeting at the appropriate time.
To choose a Primary or Alternate mailbox greeting:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
3. Press ADMIN or °.
0 new 0 saved
PLAY REC
ADMIN
4. Press GREET or ¤.
Mailbox admin
GREET PSWD QUIT
5. Press CHOOSE or ¤ to choose a greeting.
Greeting options
REC CHOOSE CFWD
6. Press PRIME or ⁄ to choose the Primary mailbox
greeting. Press ALT or ¤ to choose the Alternate
mailbox greeting.
Use greeting:
PRIME
ALT
QUIT
Note: If you choose the Alternate mailbox greeting,
go to step 7. If you choose the Primary mailbox
greeting, go to step 8.
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3 2 Greetings
7. If you choose the Alternate mailbox greeting, you are
asked whether the mailbox accepts messages. Press
CHNG to toggle from yes to no. If you choose Y (yes)
then the mailbox can receive messages. If you choose
N (no) messages cannot be left in the mailbox. Press
OK.
Accept msgs:Y
CHNG
OK
8. Press ® to end the session.
Mailbox admin
GREET PSWD QUIT
Note: If you have chosen a greeting that is not yet recorded, you are transferred back
to the greeting options menu to record the greeting.
Recording a Personalized mailbox greeting
If your company subscribes to a CLID service, you have the option of recording a
Personalized mailbox greeting. For more information about CLID, ask your System
Administrator. The Personalized mailbox greeting plays only for a person calling
from the phone number that you designate. For the Personalized mailbox greeting
to play, the phone number you enter must match the caller’s phone number exactly.
You can record up to three Personalized mailbox greetings, but each greeting can
be assigned to only one phone number.
Note: Personalized mailbox greetings do not play if you have recorded and chosen
the Alternate mailbox greeting. The Alternate mailbox greeting takes
precedence over all other greetings.
To record a Personalized mailbox greeting:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
3. Press ADMIN or °.
4. Press GREET or ¤.
5. Press REC or ⁄.
0 new 0 saved
PLAY REC ADMIN
Mailbox admin
GREET PSWD QUIT
Greeting options
REC CHOOSE CFWD
6. Press PERS or ‹ to record a Personalized mailbox
Greeting:
PRIME
ALT
PERS
OK
greeting.
7. Enter a Personalized greeting number of 1, 2, or 3.
Greeting:
RETRY
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Greetings 3 3
8. Press CHNG or ⁄.
Ph: <none>
CHNG
OK
OK
9. Enter the phone number (maximum 10 digits) to which
you are assigning the Personalized mailbox greeting.
Press OK or £ to accept the phone number.
Ph:
RETRY
10. At the tone, record the greeting. Press OK or £ to end
Record greeting:
RETRY
OK
OK
the recording.
11. Press OK or £ to accept the recording. Press PLAY or
⁄ to listen to the recording. Press RETRY or ¤ to
erase and re-record the greeting.
Accept greeting?
RETRY
PLAY
12. To record another Personalized mailbox greeting,
repeat steps 5 to 11. Press ® to end the session.
Deleting a Personalized mailbox greeting
If you program Enterprise Edge Voice Messaging with a Personalized mailbox
greeting that you no longer need, you can delete the Personalized mailbox greeting.
To delete a Personalized mailbox greeting:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
3. Press ADMIN or °.
4. Press GREET or ¤.
5. Press REC or ⁄.
0 new 0 saved
PLAY REC
ADMIN
Mailbox admin
GREET PSWD QUIT
Greeting options
REC CHOOSE CFWD
6. Press PERS or ‹ to choose a Personalized mailbox
Greeting:
PRIME ALT
PERS
OK
greeting.
7. Enter the Personalized greeting number (1, 2, or 3)
that you want to delete.
Greeting:
RETRY
8. Press DEL or ¤ to delete the greeting.
Ph: XXXXXXX
CHNG
DEL
OK
Press ® to end the session.
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3 4 Greetings
Recording an Information mailbox greeting
Before you record your Information mailbox greeting, you must determine what the
greeting includes. As you prepare your greeting, be sure to include important times
and dates. Write the greeting down and practice reading it aloud. When you are
confident the greeting includes everything you want it to, record the greeting. If you
are using a Enterprise Edge Voice Messaging system with bilingual capability, you
must record the Information mailbox greeting in both languages.
An Information mailbox greeting can be either a Primary or an Alternate mailbox
greeting. Perform the steps in Recording the Primary or the Alternate mailbox
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessing your messages
6
Introduction
This chapter describes accessing your messages and explains the following related
topics:
•
•
•
•
Receiving calls
Enterprise Edge Voice Messaging can be used by any outside caller and by other
mailbox owners in your company. When you are away from the office, you can use
Enterprise Edge Voice Messaging with any touch tone phone. When you are at the
office, you can use Enterprise Edge Voice Messaging from any Enterprise Edge
telephone connected to your company’s Enterprise Edge Voice Messaging system.
Even outside callers using a rotary dial telephone are able to use Enterprise Edge
Voice Messaging. When a caller uses Enterprise Edge Voice Messaging from a
rotary dial telephone, the system transfers the call to your company receptionist or
the Operator. If a receptionist or the Operator is not available to answer the call, the
call transfers to the General Delivery mailbox.
Enterprise Edge Voice Messaging Never Full mailbox feature
The Never Full mailbox feature lets external callers leave a message in your
mailbox, even if the mailbox is technically “full”. The message is stored in your
mailbox, but cannot be accessed until you delete at least one existing message to
allow space for the new message. If you attempt to listen to any new messages
before deleting an existing message, you hear this voice announcement:
“Your mailbox is full. You must erase some messages before you can listen to new
messages.”
You are not able to leave a message in another mailbox, create a new message,
Copy, Send, or Reply to a message, until you delete at least one existing message.
The Never Full mailbox feature is not available to internal callers. Internal callers
cannot leave messages in mailboxes that are technically “full”.
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3 6 Accessing your messages
Listening to your mailbox messages
To listen to your messages:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
3. Press PLAY to listen to your messages. For options,
2 new 0 saved
PLAY
REC
ADMIN
refer to the table Listening to your mailbox messages.
4. Press ® to end the session.
A number of options are available to you during and after listening to a message.
available.
Listening to your mailbox messages
Option
Button
Available
while
Available Description
after
listening to a listening to
message
a message
Backup
Copy
X
Rewinds the message nine seconds and resumes
playing it from that point.
⁄
or
< <<
X
X
Sends a copy of the message to one or more
mailboxes. When you record the introduction to
the forwarded message, the introduction must be
more than three seconds long.
fi
or
COPY
End of
Message
X
X
Skips to the end of the message.
‹‹
or
> >> > >>
Envelope
Erase
X
X
Plays the information in the message envelope.
Envelope information includes the date and time
the message was sent and, if the message was
internal, the directory name of the sender. This
option is not shown on the display.
‡
X
X
Deletes the message currently being played or, if
no messages are playing, deletes the message just
played. Deleted messages remain in your mailbox
2.)
°
or
ERASE
Forward
Advances the message nine seconds and
continues playing from that point. A message can
be forwarded as many times as required.
‹
or
> >>
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessing your messages 3 7
Listening to your mailbox messages
Option
Button
Available
while
Available Description
after
listening to a listening to
message
a message
Next
X
X
Plays the next message in your mailbox. If used
while a message is playing, it stops playing the
current message and plays the next message in
your mailbox. This option is not shown on the
display.
fl
or
££
Pause/
Continue
X
X
Stops a message temporarily. When you stop the
message, you have the option to play the previous
message, continue playing the current message,
or skip to the next message.
¤
or
STOP/PLAY
Previous
X
X
Stops playing the current message and begins
playing the previous message. This option is not
shown on the display.
›
•
Quit
Stops playing the message and plays the Mailbox
main menu options.
Replay
⁄⁄
or
X
Goes back to the beginning of the message and
plays the message again.
< << < <<
Replay
Reply
X
X
Replays the last message. This option is not
shown on the display.
⁄
X
X
The reply can be either:
·
or
- a message to an internal sender’s mailbox
REPLY
- a telephone call to an internal or external
Save
Message
Saves the message being played. (If you do not
delete a message, it is automatically saved). This
option is not shown on the display unless you
erase a message. If you erase a message, and play
the message again, you are given the option to
press SAVE on an Enterprise Edge two line
‡‡
or
SAVE
Volume
Control
X
Adjusts the volume of the message that is
playing. The volume increases each time you
press •. After four consecutive presses, the
volume returns to the lowest level. This option is
not shown on the display.
•
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
3 8 Accessing your messages
Notes:
1. Because your mailbox has limited message storage space, delete any messages
you no longer need. After a certain time period, your saved messages may be
erased automatically. Ask your System Administrator about this.
2. You can retrieve a deleted message only if you have not quit the session in
which you deleted it. Locate the deleted message. Then play (press ⁄⁄)
and save (press ‡‡ or SAVE) the message. For further information about
3. Applies only if the Reply feature is enabled.
4. You can reply to an outside caller by dialing them back if your company
subscribes to Caller ID (CLID) service. For further information about replying
About erased messages
After listening to your messages and exiting Enterprise Edge Voice Messaging, all
messages that you do not erase are automatically saved. Since message storage
space is limited, we recommend that you erase messages that are no longer needed.
You can retrieve an erased message if you are still in the Enterprise Edge Voice
Messaging session. An erased message remains in your mailbox until you end the
current Enterprise Edge Voice Messaging session.
After you erase a new or saved message, the number of new or saved messages
shown on the display is decreased by one. Even though the display may show 0 new
0 saved, you can still play and retrieve your erased messages. Press PLAY or ¤ to
After you play your erased message, you are given the option to save it. If you end
the current session without saving the erased message, it is permanently deleted
from Enterprise Edge Voice Messaging.
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessing your messages 3 9
Call Screening
Call Screening lets you determine who is calling before you accept the call. It
applies only to external calls transferred from the Automated Attendant or from
Custom Call Routing (CCR). See your System Administrator for information on
CCR.
Call Screening is useful in the following circumstances:
•
•
•
if CLID is not available
if CLID is not a reliable indication of the caller identity
if your Enterprise Edge telephone does not have display capabilities
The System Administrator enables the Call Screening feature for your Enterprise
Edge Voice Messaging system.
If Call Screening is unavailable, the call transfers immediately for the following
types of calls:
•
•
•
internal calls
external calls placed directly to your phone number
external calls for which you have established a Personalized greeting
How to use Call Screening
To use the Call Screening feature:
1. You receive an external call that is transferred from the Automated Attendant
or from Custom Call Routing (CCR).
2. Enterprise Edge Voice Messaging announces the caller’s name to you. If the
caller chooses not to record their name, the voice prompt says, “Unknown
caller.”
3. You have the option of accepting the call or having the caller leave a message
in your Enterprise Edge Voice Messaging mailbox:
• press ANS or ⁄ to accept the call
• press QUIT or • to transfer the call to your Enterprise Edge Voice Messaging
mailbox (and the caller is informed that you are not available).
If Call Screening is enabled, Enterprise Edge Voice Messaging asks the caller to
record their name after the tone. (If the caller presses • when they are asked to
record their name, the call goes back to the Automated Attendant.) The caller hears
a hold tone while they wait. If you do not answer, the caller is informed that you are
not available, and the call transfers to your mailbox.
Since some callers may not like recording their name and waiting for service, use
this feature with discretion.
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
4 0 Accessing your messages
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending messages
7
Introduction
This chapter describes sending messages and explains the following topics:
•
•
•
•
•
•
•
•
Types of messages
There are two types of messages, Broadcast messages and Personal messages.
Broadcast messages
There might be times when you open your Personal mailbox and a message plays
immediately. This is a Broadcast message left by your System Administrator. This
type of message can be sent only by your System Administrator. Make sure you
listen to the entire message. After it plays, the message is automatically erased from
your mailbox.
Personal messages
Sending personal messages to a mailbox
send a message when you do not know the person’s mailbox number, use the
Personal messages addressed to a Group List
You can send a message to a group of people by addressing a message to a Group
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
4 2 Sending messages
About recording and sending a message
Messages can be recorded and sent using:
•
•
the Open Mailbox feature (ƒ·°⁄)
the Leave Message feature (ƒ·°‚)
When you use the Open Mailbox feature, you open your personal mailbox and enter
your password. Then you record your message and enter the extension of the
message recipient.
The Leave Message feature prompts you to enter the extension of the message
recipient immediately. Then you record your message. No password is required
because you do not open a mailbox.
Both features allow you to:
•
•
•
send a message to more than one recipient (refer to Sending a message to more
Using the Company Directory
You can find any initialized mailbox by searching the Company Directory. Use the
Company Directory if you do not know the mailbox number of someone you want
to send a message to. You can access the Company Directory if:
•
•
•
the display shows DIR
the voice prompt announces, “Press £ to use the Directory.”
you are prompted to choose a mailbox
The Company Directory option is available from both the Open Mailbox feature
and the Leave Message feature.
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending messages 4 3
To access the Company Directory using the Leave Message feature:
1. Press DIR or £ to use the Company Directory.
Mbox:
DIR
QUIT
OK
2. Use the dialpad buttons associated with the first three
or four letters of the mailbox owner’s name to locate
and select the person’s mailbox. (Enter the last name,
first name or both names depending on how your
system is set up. This display shows an example of a
prompt for a mailbox owner’s last name.) You do not
need to enter a comma. Press OK or £.
Last name:
For example, to enter the letters “Wayn”
press ·¤·fl. If the mailbox owner has fewer
than four letters in their last name, press the buttons on
the dialpad to spell out the entire last name, and press
3. In this example, the name of the mailbox owner, Paul
Wayne appears on the display and is announced. To
accept the mailbox owner, press OK or £.
Wayne, Paul
RETRY
NEXT
OK
If you do not want the person who is shown, press
NEXT or ⁄ to see the next matching name.
4. The greeting of the mailbox owner plays. If the
mailbox owner you selected does not have a Personal
greeting recorded and selected, you hear their
Company Directory recording.
Wayne, Paul
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
4 4 Sending messages
Message delivery options
Enterprise Edge Voice Messaging provides you with five possible message delivery
options:
•
•
•
•
•
Normal
Certified
Urgent
Private
Timed Delivery
Option
Display Button Button
Description
Send
SEND
£ or ®
Sends a message with Normal delivery
option.
Certified
Urgent
CERT
Sends you notification that your message
has been received and played.
⁄
URGENT
Plays messages marked Urgent before other
messages left in the mailbox. Urgent
messages are preceded by the voice prompt,
“This message is urgent”.
¤
Other
OTHR
Accesses the Private and Timed delivery
options. If PRIV appears instead of OTHR,
the Timed delivery option is not available.
Private
Timed
PRIV
TIME
Private messages cannot be forwarded to
another mailbox.
‹
›
Allows you to assign the time that the
message is received.
Normal, Certified, and Private messages play in the order they are received. Urgent
messages play before other messages left in the mailbox, except for Broadcast
delivery options are available only if you call from a telephone that has a mailbox
associated with it. Messages sent with the Timed delivery option are played at the
time that you specify.
If you use the Timed delivery option, you first enter the time, including a.m. or p.m.
You are then prompted to accept or change the date, which defaults to today or
tomorrow, and you can accept the date that corresponds to the next occurrence of
the specified time. Dates are shown by month and day, and the year is inferred. If
the month and day are earlier than the current date, the next year is assumed. When
the specified time and date occurs, the message is sent. You cannot cancel the
message prior to delivery.
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending messages 4 5
Assigning message delivery options using the Open Mailbox feature
To assign message delivery options using the Open Mailbox feature:
1. Press CERT or ⁄ to assign the Certified delivery
Delivery options
CERT URGENT OTHR
option. Press URGENT or ¤ to assign the Urgent
delivery option. Press OTHR to assign the Private or
Timed delivery options. If PRIV appears instead of
OTHR, the Timed delivery option is not available.
Note: The OTHR display button is not available or
required for single-line display telephones.
You can access the Private and Timed
Delivery options by pressing the dialpad
buttons on either a two-line or a single-line
display telephone.
2. Press PRIV or ‹ to send a message with a Private
Delivery options
PRIV
TIME
delivery option. If you press PRIV or ‹, go to step 7.
If you want to send a message with the Timed delivery
option press TIME or ›. If you press TIME or ›,
continue with step 3.
3. Enter the time that you want to send a message using
Time hhmm:
RETRY
the Timed delivery option.
Note: This is a four digit field. Any single-digit hour
or minute must be preceded by a zero. For
example, enter 0800 for eight o’clock.
4. Press AM or ⁄ or PM or ¤.
hh:mm
RETRY
AM
PM
OK
5. Press OK or £ to accept the time you entered or press
hh:mm am/pm
RETRY
RETRY or • to change the time.
6. Press CHNG or ⁄ to change the date shown to a
different date. Press NXTDAY to change the date to the
next day (the day after the date that is shown). Press
OK or £ to accept the date shown, which defaults to
today or tomorrow, and select the one that corresponds
to the next occurrence of the specified time.
Tu mm dd
CHNG
NXTDAY OK
7. Press SEND or £ to send this message now. Press •
Wayne, Paul
OPTS
CC
SEND
to cancel all delivery options.
Press ® to end this session.
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
4 6 Sending messages
Assigning message delivery options using the Leave Message feature
To assign message delivery options using the Leave Message feature:
1. Press ƒ·°‚.
2. Enter the mailbox number or Group List number of the
person or Group you want to leave a message for. If
you do not know the mailbox number, press DIR or £
to use the Company Directory.
Mbox:
DIR
QUIT
3. At the sound of the tone, record your message. Press
PAUSE or ¤ to pause during your recording. When
you pause, press CONT or ¤ to continue recording
your message. Press OK or £ to end your recording.
Press RETRY to erase and re-record your message.
Record message:
RETRY PAUSE
OK
4. Press PLAY or ⁄ to listen to your message before
sending it. Press RETRY or ¤ to erase and re-record
your message. Press ‹ to access delivery options.
Press SEND or £ to send your message now.
Message options:
RETRY PLAY SEND
Recording and sending a message using the Open Mailbox feature
To record and send a message using the Open Mailbox feature:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
3. Press REC or ‹ and record your message at the tone.
0 new 0 saved
PLAY REC
ADMIN
4. Record your message. Press PAUSE or ¤ while
recording your message to stop temporarily. When you
wish to resume recording, press CONT or ¤ to
continue recording your message. Press OK or £ to
end your recording. Press RETRY to erase and re-record
your message.
Record message:
RETRY PAUSE
OK
5. Press OK or £ to accept your message. Press PLAY or
⁄ to listen to your message. Press RETRY or ¤ to
erase and re-record your message.
Accept rec?
RETRY PLAY
OK
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending messages 4 7
6. Enter the mailbox number or Group List number of the
person or Group you want to leave a message for. If
you do not know the mailbox number, press DIR or £
to use the Company Directory.
Mbox:
DIR
QUIT
SEND
7. Press SEND or £ to send the message now with the
Normal delivery option. Press OPTS or ‹ for delivery
options. Press CC or › to send this message to more
than one mailbox owner, with one set of delivery
options applied to all recipients.
Wayne, Paul
OPTS
CC
Note: The display shows the name of the mailbox
owner or Group (in this example, mailbox
owner Paul Wayne).
Press ® to end this session.
0 new 8 saved
PLAY REC
ADMIN
Recording and sending a message using the Leave Message feature
To record and send a message using the Leave Message feature:
1. Press ƒ·°‚.
2. Enter the mailbox number or Group List number of the
person or Group you want to leave a message for. If
you do not know the mailbox number, press DIR or £
to use the Company Directory.
Mbox:
DIR
QUIT
3. At the sound of the tone, record your message. Press
Record message:
RETRY PAUSE
OK
OK or £ to end your message.
4. Press SEND or £ or replace the receiver to send the
message using the Normal Delivery Option. Press
PLAY or ⁄ to listen to your message. Press RETRY or
¤ to erase and re-record your message. Press ‹ to
change the Delivery Options.
Message options:
RETRY PLAY SEND
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
4 8 Sending messages
Replying to messages
You can reply to internal message senders and to external message senders. To
reply to a message from an external message sender, your company must subscribe
to Caller ID (CLID).
Replying to an internal message sender
You can reply to a message from an internal message sender by:
1. Using the CALL option. If you select CALL, you are immediately transferred to
the internal message sender’s extension. You must have an initialized
Enterprise Edge Voice Messaging mailbox and an operating directory to use
the CALL option.
2. Using the MSG option. If you select the MSG option, begin recording your reply
at the tone.
To reply to an internal message sender:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
3. Press PLAY or ¤.
1 new 0 saved
PLAY REC
ADMIN
4. After you have listened to your message, press REPLY
End of message
REPLY ERASE NEXT
or ·.
5. Press CALL or ¤ to call the message sender
or
Reply to msg
MSG
CALL
QUIT
press MSG or ⁄ to record and send a reply.
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending messages 4 9
Replying to an external message sender
You can reply to a message from an external message sender if your company
subscribes to CLID. Before using the Reply option you must play the message.
To reply to an external message sender:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
3. Press PLAY or ¤.
1 new 0 saved
PLAY REC
ADMIN
4. Press REPLY.
End of message
REPLY ERASE NEXT
5. Enterprise Edge Voice Messaging dials the external
number directly.
After you call the message sender, your session ends.
Sending a message to more than one recipient
Sending a message using a Group List
A Group List is a collection of mailbox owners. When you send a message to a
Group List, each mailbox owner in the Group List receives the same message. If
you are a member of the group you are addressing, you do not receive a copy of the
message.
If you would like a Group List for your specific needs, ask your System
Administrator to create a Group List for you. Include the following information for
the System Administrator:
•
•
•
the mailbox owners’ names
a list of the mailbox numbers
the Group List name
Your System Administrator can publish a list of the mailboxes in each Group List.
You can enter the Group List number instead of a mailbox number at the Mbox:
prompt. You can also enter the name of the Group List in the Company Directory
at the DIR prompt.
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
5 0 Sending messages
Copying a message to other recipients
You can copy a message to other recipients using the Open Mailbox feature:
•
•
using ALL - message recipients have the same delivery options
using CC - this allows message recipients to have different delivery options
Note: You cannot copy a message to other recipients using the Leave Mailbox
feature. You cannot copy Private messages.
Forwarding a copy of a message to one or more recipients
From the Main Mailbox menu you can forward a copy of a message during or after
playing the message. When you forward a copy of a message to a mailbox, you are
prompted to record an introduction to the message. Your introduction has to be at
least three seconds long.
When you record an introduction and enter the mailbox number, your introduction
and a copy of the message are automatically sent to the mailbox you selected. You
then have options to send an additional copy of the introduction and the message to
another mailbox, or to quit and return to the Listen to Messages menu. You can
forward copies to as many mailboxes as you want. (Messages marked Private
cannot be forwarded to another mailbox.)
For more information on playing your messages, refer to Listening to your mailbox
Copying a message is not the same as forwarding a message using the Copy option.
Copied messages do not have recorded introductions. Refer to Copying a message
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Forwarding your calls
8
Introduction
This chapter shows the following ways that you can forward your calls:
•
•
•
Call Forwarding your calls to Enterprise Edge Voice Messaging
To forward incoming calls to your mailbox, press ƒ·°›.
To cancel Call Forward, do one of the following:
•
•
•
press ∞
press ƒ£›
press CANCEL
Setting up Call Forward remotely
When you are away from the office, you can forward your calls to your Enterprise
Edge Voice Messaging mailbox by using the dialpad of any touch tone phone.
To access your Personal mailbox from another location and set up Remote Call
Forward:
1. Call the Automated Attendant or your Enterprise Edge telephone from any
touch tone phone and press •• while the greeting plays.
2. Enter your mailbox number and password and press £.
3. Press °.
4. Press ¤.
5. Press ‹ to turn call forwarding from the Call Forward menu on and off.
6. Press ⁄ to turn Call Forward on and off.
Note: If Call Forward is turned on, the voice prompt says: “Calls will be
answered immediately.” All calls to your telephone are now answered
by Enterprise Edge Voice Messaging.
If Call Forward is turned off, the voice prompt says: “Calls will ring at
your set.”
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
5 2 Call Forwarding your calls
7. Press ⁄ to turn Call Display on and off.
Note: If Call Display is turned on, the voice prompt says: “Caller
information will be displayed at your set.”
If Call Display is turned off, the voice prompt says: “Caller
information will not be displayed.”
8. Replace the handset to end this session.
Call Forward with Caller ID (CLID)
The Call Forward with CLID feature is available only if your company subscribes
to CLID service. If you are not sure whether your company subscribes to CLID
service, ask your System Administrator. CLID does not appear if the caller has a
private or unknown phone number.
You can set up Call Forward with CLID to screen calls forwarded to your Enterprise
Edge Voice Messaging mailbox. If the feature is enabled, you hear an Alert tone and
the CLID information appears on the telephone display.
To talk to the caller who has been forwarded to your mailbox, press
ƒ·°‡ to interrupt the call.
To turn Call Forward with CLID on and off:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
3. Press ADMIN or °.
0 new 0 saved
PLAY REC
ADMIN
4. Press GREET or ¤.
Mailbox admin
GREET PSWD QUIT
5. Press CFWD or ‹.
Greeting options
REC CHOOSE CFWD
6. Press CHNG or ⁄ to turn Call Forward on and off.
7. Press CHNG or ⁄ to turn Call Display on and off.
8. Press ® to end the session.
Forward calls:Y
CHNG
NEXT
Display caller:Y
CHNG
NEXT
Mailbox admin
GREET PSWD QUIT
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Forwarding your calls 5 3
Call Forward on Busy overrides CLID
If your Enterprise Edge telephone is assigned Call Forward on Busy, CLID
information does not appear on the display. Call Forward on Busy is a feature that
forwards all of your calls to another designated telephone or extension if your
telephone is busy. Call Forward on Busy is assigned by the Enterprise Edge System
Administrator.
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
5 4 Call Forwarding your calls
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring calls
9
Introduction
This chapter describes transferring calls and explains:
•
•
•
•
•
•
•
•
•
•
Transferring calls to an Enterprise Edge Voice Messaging mailbox
Any time a caller wants to leave a message in a mailbox, you can easily transfer
their call from your Enterprise Edge telephone to any mailbox initialized with
Enterprise Edge Voice Messaging.
Transferring calls to an Enterprise Edge Voice Messaging mailbox has the
following advantages:
•
If you transfer a call to a mailbox instead of another telephone, the call does not
come back to you. If you transfer a call to another telephone and the call is not
answered, the call does comes back to you.
•
The call is immediately transferred to the mailbox (which saves time).
ƒ·°fl is not available on the Enterprise Edge Companion Wireless
telephone.
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
5 6 Transferring calls
To transfer a call to a mailbox from your Enterprise Edge telephone:
1. Press ƒ·°fl. Do not press ˙ because the call is put on
hold automatically.
2. Enter the mailbox number or use the Company Directory by pressing DIR.
Note: Press OK or £ to accept a name when using the Company Directory.
Do not use the Internal Autodial feature.
3. Wait until the display shows Call transferred before attempting any other
Enterprise Edge Voice Messaging functions. The call is automatically
transferred and the Enterprise Edge Voice Messaging session ends.
Transferring a mailbox owner’s call to Enterprise Edge Voice Messaging
You can transfer a mailbox owner’s call to their Enterprise Edge Voice Messaging
mailbox so that they can change their greetings or retrieve their messages.
Note: ƒ·°fl is not available on the Enterprise Edge Companion
Wireless telephone.
To transfer a mailbox owner’s call to their Enterprise Edge Voice Messaging
mailbox from your Enterprise Edge telephone:
1. Press ƒ·°fl. Do not press ˙.
2. Enter the mailbox owner’s mailbox number.
3. Wait until the display shows Call transferred before attempting any other
Enterprise Edge Voice Messaging functions. The call is automatically
transfers and the Enterprise Edge Voice Messaging session ends.
Note: Do not use ƒ‡‚ to transfer a mailbox owner’s call. This
feature transfers the call to their telephone and the call comes back to
you.
After a mailbox owner’s call transfers to their mailbox, the mailbox owner must:
1. Press •• while their Personal greeting plays.
2. Enter their mailbox number and password and press £.
3. Follow the voice prompts.
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring calls 5 7
Transferring calls from your mailbox to the Operator
To transfer calls from your mailbox to the Operator, press ‚ while at the Main
Transferring calls from your mailbox to the Automated Attendant
To transfer to the Automated Attendant from your mailbox, press £ at the Main
Transferring a call to Custom Call Routing (CCR)
About Custom Call Routing (CCR)
Custom Call Routing (CCR) is a single-digit application that provides callers with
a more sophisticated menu and a wider range of options. Using CCR, a caller can:
•
•
•
•
listen to the Home menu and make a selection
listen to a pre-recorded CCR Information message
leave a message in a mailbox
transfer to another extension or an external number
For more information about CCR, ask your System Administrator.
A call can be transferred to the beginning of a CCR Tree. To transfer a call to a CCR
Tree:
1. Press ƒ·°fl. Do not press ˙.
2. Choose a CCR Tree by entering a digit from 1 to 4 and pressing £.
3. Wait until the display shows Call transferred before attempting any other
Enterprise Edge Voice Messaging functions. The call automatically transfers
and the Enterprise Edge Voice Messaging session ends.
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
5 8 Transferring calls
Outbound Transfer
You can set up Outbound Transfer to transfer a caller who has reached your mailbox
to a number that you assign. A caller can use Outbound Transfer from any touch
tone telephone, and you can direct your Outbound Transfer calls to any telephone.
You can personally inform callers of this feature, or you can inform callers of this
feature in your personal greeting. If you choose to inform callers of this feature in
your mailbox greeting, you must tell them to press ‡ to be transferred. For
example:
“Hi. This is Brenda Whately. I’m away from the office today. Please leave me a
message after the tone and I will return your call as soon as possible. If you need
to reach me before tomorrow, press ‡ and you will be transferred to my cellular
phone. Thanks.”
Note: The restrictions that apply to your telephone line also apply to Outbound
Transfer numbers. For example, if you are unable to dial long distance
phone numbers from your telephone, you cannot have a long distance
Outbound Transfer destination.
If your mailbox is restricted to extension destinations for Outbound
Transfer, see your System Administrator.
For Outbound Transfer to function properly, you must have a greeting recorded.
When you set up Outbound Transfer, you can add special characters to the
refer to the following tables and examples.
Adding special characters to the destination number
Follow the voice prompts or press ADD to add special characters to a destination
phone number (or a destination pager number if you are setting up a destination
pager number in Off-premise Message Notification. The destination pager number
cannot be longer than 29 characters.) The destination phone number cannot be
longer than 30 characters.
Note: If you are adding special characters, do not press the dialpad buttons
£ to enter a #, or • to enter a *. Press the button directly below the
option on a two-line display telephone, or listen to the voice prompts.
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring calls 5 9
To add special characters on an Enterprise Edge one line display telephone, refer to
Table 4 Adding special characters using an Enterprise Edge one line display telephone
Press
Description
to retry or add digits to the destination phone number.
¤
to enter a timed pause that appears as P on the display. Pauses are four seconds
long.
‹
›
to recognize dial tone (behind PBX). The Recognize Dial Tone special
character appears as D on the display.
to enter a #.
fi
fl
•
to enter a *.
to cancel and retry.
Adding special characters using an Enterprise Edge two line display telephone
Press
Description
to cancel and retry.
•
DIGS or ¤
to retry or add digits to the destination phone number.
PAUS or ‹
to enter a timed pause that appears as P on the display. Pauses are
four seconds long.
OTHR
TONE
to go to the next display to enter the following special characters:
to recognize dial tone (behind PBX). The Recognize Dial Tone
special character appears as D on the display.
#
*
to enter a #.
to enter a *.
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
6 0 Transferring calls
Optimizing Outbound Transfer
When Enterprise Edge Voice Messaging transfers a call to an external telephone
number using Outbound Transfer, two lines are used. An incoming line is used to
connect the caller to your mailbox and an outgoing line is used to transfer the caller
to your Outbound Transfer telephone number. Both lines remain in use while the
caller connects to the Outbound Transfer telephone number.
To optimize the use of Enterprise Edge Voice Messaging lines, the Outbound
Transfer call to an external telephone number can transfer to the incoming line to
make the outgoing call. This type of transfer is called a Link transfer.
Note: A Link transfer can be performed only if the Enterprise Edge Voice
Messaging line is equipped with Link transfer capability. If a Link transfer
is programmed for an Outbound Transfer and your Enterprise Edge Voice
Messaging lines do not support this feature, the caller disconnects. Ask your
System Administrator before programming the Link transfer.
To perform a Link transfer with Outbound Transfer you must add a £ before the
Outbound Transfer telephone number. For example, the telephone number would
look like:
£fififi⁄¤‹›
where:
£ instructs Enterprise Edge Voice Messaging to use the incoming line to perform
the transfer
fi⁄¤‹› is the telephone number dialed
Programming an Outbound Transfer telephone number when Enterprise Edge
Voice Messaging is behind PBX or Centrex+
When Enterprise Edge Voice Messaging is installed behind a PBX or Centrex+ and
you want to access an outside line and recognize dial tone, enter:
·£›¤fififi⁄¤‹›
where:
· accesses an outside line
£ specifies the next digits are special characters
› recognizes dial tone
¤ specifies the next digits are numbers to be dialed
fififi⁄¤‹› is the phone number dialed
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring calls 6 1
Setting up Outbound Transfer to a phone number
To set up Outbound Transfer to a phone number for the first time:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
3. Press ADMIN or °.
0 new 0 saved
PLAY REC
ADMIN
4. Press ° to open the Outbound Transfer (xfr) menu.
5. Press ADMIN or ⁄ to set up Outbound Transfer.
Mailbox admin
GREET PSWD QUIT
Outbound xfr
ADMIN
SELECT
OK
6. Enter the destination phone number and press OK or
Ph:
RETRY
£.
7. Press OK or £ to accept the destination number
(represented by the <x>). Press ADD or ¤ to add
special characters. For information, refer to Adding
accept the destination number.
<x>
ADD
OK
8. Press CHNG or ⁄ to turn Outbound Transfer on.
Transfer: off
CHNG
QUIT
QUIT
9. Press QUIT or •. Press ® to end this session.
Transfer: on
CHNG
Setting up Outbound Transfer to an extension
To set up Outbound Transfer to an extension for the first time:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
3. Press ADMIN or °.
Pswd:
OTHR
RETRY
OK
0 new 0 saved
PLAY REC
ADMIN
4. Press ° to open the Outbound Transfer (xfr) menu.
Mailbox admin
GREET PSWD QUIT
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
6 2 Transferring calls
5. Press ADMIN or ⁄ to set up Outbound Transfer.
6. Enter the destination extension and press OK or £.
7. Press OK or £ to accept the number.
Outbound xfr
ADMIN
SELECT
OK
Ext:
RETRY
Accept:<x>
RETRY
OK
Note: The <x> represents the extension.
8. Press CHNG or ⁄ to turn Outbound Transfer on.
Transfer: off
CHNG
QUIT
QUIT
9. Press QUIT or •. Press ® to end this session.
Transfer: on
CHNG
Changing the Outbound Transfer parameters
To change the Outbound Transfer parameters:
10. Press CHNG or ⁄.
<x>
CHNG
NEXT
Note: The <x> represents the current Outbound
Transfer destination number.
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Transferring calls 6 3
Turning Outbound Transfer on and off
You can turn Outbound Transfer on or off at any time after you set it up. Turning
Outbound Transfer off does not affect any of its assigned parameters.
To turn Outbound Transfer on or off:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
3. Press ADMIN or °.
0 new 0 saved
PLAY REC
ADMIN
4. Press ° to open the Outbound Transfer (xfr) Menu.
5. Press SELECT or ¤.
Mailbox admin
GREET PSWD QUIT
Outbound xfr
ADMIN
SELECT
QUIT
6. Press CHNG or ⁄ to turn Outbound Transfer off. Press
Transfer: on
CHNG
CHNG again to turn Outbound Transfer on.
7. Press QUIT or ® to end this session.
Transfer: off
CHNG
QUIT
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
6 4 Transferring calls
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Off-premise Message Notification
10
Introduction
This chapter describes how to set up and change Off-premise Message Notification
and includes the following topics:
•
•
•
•
•
•
•
•
•
About Off-premise Message Notification
You can program Enterprise Edge Voice Messaging to call you and let you know
there is a message for you at a phone number, an extension, or a pager. The Off-
premise Message Notification feature is enabled by your System Administrator.
If you program Enterprise Edge Voice Messaging to call you at a telephone, you are
prompted to enter your password before you can listen to your messages.
You can receive notification of a message at a maximum of five different
destination numbers assigned by you. When the number of retry attempts is reached
for each assigned destination number, the next number in the series is called. For
example, Enterprise Edge Voice Messaging can contact your car phone number
first to let you know you have a message. If there is no answer, the call rings at your
home number. If there is still no answer, the call rings at your pager number and so
on. The number of retry attempts is assigned by your System Administrator.
If the destination type is phone, you must assign start and stop times. The start and
stop times apply to all five notification numbers.
Off-premise Message Notification begins when the start time is reached. Set the
start time for the time you will be at the destination phone number, so you are there
to receive your calls.
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
6 6 Off-premise Message Notification
Off-premise Message Notification parameters
You can set up the parameters for Off-premise Message Notification from any
touch tone phone. The parameters include:
•
•
•
destination type (telephone, extension or pager)
destination number (telephone, extension or pager)
time range for receiving calls at phone numbers or extensions (Pagers are
notified any time there is a qualifying message.)
•
types of message you want to receive (all new messages, or just messages
marked urgent)
Note: The restrictions that apply to your telephone line also apply to Off-premise
Message Notification numbers. For example, if you are unable to dial long
distance phone numbers from your telephone, you cannot have a long
distance Off-premise Message Notification destination number.
Setting up Off-premise Message Notification to a phone number
When you set up Off-premise Message Notification, you can add special characters
to the destination phone number. Refer to:
•
•
To set up Off-premise Message Notification to one phone number for the first time:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
3. Press ADMIN or °.
0 new 0 saved
PLAY REC
ADMIN
4. Press fl to open the Off-premise Message
Mailbox admin
GREET PSWD QUIT
Notification menu.
5. Press ADMIN or ⁄ to set up Off-premise Message
Msg notify
ADMIN
SELECT
Notification.
6. Press PHONE or ⁄ to choose a phone number
Destination:
PHONE EXT PAGER
destination.
7. Enter the destination phone number and press OK or
£. The destination phone number is a maximum of
30 digits.
Ph:
RETRY
OK
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Off-premise Message Notification 6 7
8. Press OK or £ to accept the destination phone
<x>
ADD
OK
number. The <x> represents the phone number. Press
ADD or ¤ to add special characters. For information,
press OK or £ to accept the destination number.
9. Enter the start time for Off-premise Message
Notification. This is a four-digit field. Any single-digit
hour and minute must be preceded by a zero.
Start hhmm:
RETRY
OK
10. Press AM or ⁄ or PM or ¤.
<start time>
RETRY
AM
PM
OK
OK
11. Press OK or £ to accept the start time.
<start time>
RETRY
12. Enter the time when Off-premise Message
Notification is to stop. This is a four digit field. Any
single-digit hour and minute must be preceded by a
zero.
Stop hhmm:
RETRY
13. Press AM or ⁄ or PM or ¤.
<stop time>
RETRY
AM
PM
OK
14. Press OK or £ to accept the stop time.
<stop time>
RETRY
15. Press NEXT or £ to accept the start time that you
Start:<start time>
CHNG
NEXT
entered. Press CHNG or ⁄ to change the start time.
Note: Steps 16 and 17 allow you to review the start
and stop times.
16. Press NEXT or £ to accept the stop time that you
Stop:<stop time>
CHNG
NEXT
entered. Press CHNG or ⁄ to change the stop time.
17. You can choose to be notified of all new messages or
urgent messages only. Press OK or £ to accept the
default message type new. This means you are notified
whenever you receive a new message. Press CHNG or
⁄ to change the message type to urgent. Changing
the message type to urgent means you are notified
only when you receive an urgent message.
Msg type: new
CHNG
OK
18. Press ® to end the session.
Msg notify
ADMIN
SELECT
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
6 8 Off-premise Message Notification
Setting up Off-premise Message Notification to an extension
To set up Off-premise Message Notification to one extension for the first time:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
3. Press ADMIN or °.
0 new 0 saved
PLAY REC
ADMIN
4. Press fl to open the Off-premise Message
Mailbox admin
GREET PSWD QUIT
Notification menu.
5. Press ADMIN or ⁄ to set up Off-premise Message
Msg notify
ADMIN
SELECT
Notification.
6. Press EXT or ¤ to choose an extension destination.
Destination:
PHONE EXT PAGER
7. Enter the destination extension and press OK or £.
Ext:
RETRY
OK
OK
8. Press OK or £ to accept the destination extension.
Accept:<x>
RETRY
The <x> represents the extension.
9. Enter the start time for Off-premise Message
Notification. This is a four-digit field. Any single-digit
hour and minute must be preceded by a zero.
Start hhmm:
RETRY
OK
10. Press AM or ⁄ or PM or ¤.
<start time>
RETRY
AM
PM
OK
OK
11. Press OK or £ to accept the start time.
<start time>
RETRY
12. Enter the time when Off-premise Message
Notification is to stop. This is a four digit field. Any
single-digit hour and minute must be preceded by a
zero.
Stop hhmm:
RETRY
13. Press AM or ⁄ or PM or ¤.
<stop time>
RETRY
AM
PM
OK
14. Press OK or £ to accept the stop time.
<stop time>
RETRY
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Off-premise Message Notification 6 9
15. Press NEXT or £ to accept the start time that you
Start:<start time>
CHNG
NEXT
entered. Press CHNG or ⁄ to change the start time.
Note: Steps 16 and 17 allow you to review the start
and stop times.
16. Press NEXT or £ to accept the stop time that you
Stop:<stop time>
CHNG
NEXT
entered. Press CHNG or ⁄ to change the stop time.
17. You can choose to be notified of all new messages or
urgent messages only. Press OK or £ to accept the
default message type new. This means you are notified
whenever you receive a new message. Press CHNG or
⁄ to change the message type to urgent. Changing
the message type to urgent means you are notified
only when you receive an urgent message.
Msg type: new
CHNG
OK
18. Press ® to end the session.
Msg notify
ADMIN
SELECT
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
7 0 Off-premise Message Notification
Setting up Off-premise Message Notification to a pager number
When you set up Off-premise Message Notification, you can add special characters
to the destination pager number. Read:
•
•
Example of a destination pager number
If you are assigning a pager destination number from behind a PBX or Centrex+,
remember to insert a · (depending on your system) before the £ to access an
outside line.
There is a combined limit of 29 characters for the pager phone number and the pager
message.
For example, to reach your pager, enter:
£›¤fififi⁄¤‹›£‹
where:
£ specifies the next digits are special characters
› recognizes dial tone
¤ specifies the next digits are numbers to be dialed
fififi⁄¤‹› is the pager phone number dialed
‹ inserts a timed pause
Depending on the company supplying your paging service, the programming
sequence may vary. For more information about setting the destination phone
number parameters for your pager, contact your pager company.
To set up Off-premise Message Notification to one pager number for the first time:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
3. Press ADMIN or °.
0 new 0 saved
PLAY REC
ADMIN
4. Press fl to open the Off-premise Message
Mailbox admin
GREET PSWD QUIT
Notification menu.
5. Press ADMIN or ⁄ to set up Off-premise Message
Msg notify
ADMIN
SELECT
Notification.
6. Press PAGER or ‹ to choose a pager number
Destination:
PHONE EXT PAGER
destination.
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Off-premise Message Notification 7 1
7. Enter the destination pager number and press OK or
Pager:
RETRY
OK
OK
£.
8. Press OK or £ to accept the destination pager number.
The <x> represents the pager number. Press ADD or
¤ to add special characters. If the paging service
requires additional answer or setup time, add pause
characters to the beginning of the pager message. For
information, refer to Adding special characters to the
characters, press OK or £ to accept the destination
number.
<x>
ADD
9. Press NEXT or £ to accept the default pager message
(represented by the xxxx). The default pager message
sent by Enterprise Edge Voice Messaging is the
Enterprise Edge Voice Messaging extension. This is
the sequence of digits sent after the pager service is
dialed (to notify you of who is paging you). Press
CHNG or ⁄ to change the pager message.
Show:<xxxx>
CHNG
NEXT
Note: There is a combined limit of 29 characters for
the pager phone number and the pager
message.
10. You can choose to be notified of all new messages or
urgent messages only. Press OK or £ to accept the
default message type new. This means you are notified
whenever you receive a new message. Press CHNG or
⁄ to change the message type to urgent. Changing
the message type to urgent means you are notified
only when you receive an urgent message.
Msg type: new
CHNG
OK
11. Press ƒ to end the session.
Msg notify
ADMIN
SELECT
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
7 2 Off-premise Message Notification
Changing Off-premise Message Notification
To change the parameters of Off-premise Message Notification refer to:
•
•
•
Changing Off-premise Message Notification parameters
To change the Off-premise Message Notification parameters from your Enterprise
Edge telephone (assuming that you have entered a time range):
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
3. Press ADMIN or °.
0 new 0 saved
PLAY REC
ADMIN
4. Press fl to open the Off-premise Message
Mailbox admin
GREET PSWD QUIT
Notification menu.
5. Press ADMIN or ⁄ to set up Off-premise Message
Msg notify
ADMIN
SELECT
NEXT
Notification.
6. Press CHNG or ⁄ to change the destination.
Notify:<x>
CHNG
Note: The <x> represents the type of destination
(phone, extension or pager).
7. Press PHONE or ⁄ to choose a phone number
destination. Press EXT or ¤ to choose an extension
destination. Press PAGER or ‹ to choose a pager
number destination.
Destination:
PHONE EXT PAGER
8. Enter the destination number and press OK or £. The
destination phone number cannot be longer than 30
digits.
<x>:
RETRY
OK
Note: The <x> represents the type of destination
(phone, extension or pager).
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Off-premise Message Notification 7 3
9. Press OK or £ to accept the destination number
(represented by the <x>). Press ADD or ¤ to add
special characters if the destination number is a phone
or pager. For information, refer to Adding special
you add special characters, press OK or £ to accept
the destination number.
Note: If you chose a phone or extension destination,
go to step 11.
10. Press CHNG or ⁄ to change the destination and repeat
Notify:<x>
CHNG
NEXT
steps 7 to 9. Press NEXT or £ to continue.
Note: The <x> represents the type of destination
(phone, extension or pager).
11. Press CHNG or ⁄ to change the start time. Press NEXT
Start:<start time>
CHNG
NEXT
or £ to accept the start time.
12. Press CHNG or ⁄ to change the stop time. Press NEXT
Stop:<stop time>
CHNG
NEXT
or £ to accept the stop time.
Note: Steps 13 and 14 allow you to review the start
and stop times.
13. Press CHNG or ⁄ to change the message type to
urgent. Press OK or £ to accept the new default
message. You can choose to be notified of all new
messages or urgent messages only. This means you are
notified whenever you receive a new message.
Changing the message type to urgent means you are
notified only when you receive an urgent message.
Msg type: new
CHNG
OK
14. Press ® to end the session.
Msg notify
ADMIN
SELECT
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
7 4 Off-premise Message Notification
Changing the destination type from a pager to a telephone or extension
To change the Off-premise Message Notification destination from a pager to a
phone or extension (assuming that you have never entered a time range):
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
3. Press ADMIN or °.
0 new 0 saved
PLAY REC
ADMIN
4. Press fl to open the Off-premise Message
Mailbox admin
GREET PSWD QUIT
Notification menu.
5. Press ADMIN or ⁄ to change Off-premise Message
Notification. The displays show a review of the first
destination type and destination number, followed by
the display in step 6.
Msg notify
ADMIN
SELECT
NEXT
6. Press CHNG or ⁄ to change the destination type and
Notify: pager
CHNG
the destination number.
7. Choose the type of destination number. Press PHONE or
⁄ to choose a phone number destination. Press EXT
or ¤ to choose an extension destination.
Destination:
PHONE EXT PAGER
8. Press OK or £ to accept the destination number. Press
ADD or ¤ to add special characters if the destination
number is a phone. For information, refer to Adding
58.
9. Press NEXT or £ to continue.
Notify:<x>
CHNG
NEXT
Note: The <x> represents the type of destination
(telephone or extension).
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Off-premise Message Notification 7 5
Changing the destination type from phone or extension to a pager
To change the Off-premise Message Notification destination from a phone or
extension to a pager:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
3. Press ADMIN or °.
0 new 0 saved
PLAY REC
ADMIN
4. Press fl to open the Off-premise Message
Mailbox admin
GREET PSWD QUIT
Notification menu.
5. Press ADMIN or ⁄ to change Off-premise Message
Notification. The displays show a review of the first
destination type and destination number, followed by
the display in step 6.
Msg notify
ADMIN
SELECT
NEXT
6. Press CHNG or ⁄ to change the destination type and
Notify:<x>
CHNG
the destination number.
Note: The <x> represents the type of destination
(phone or extension).
7. Press PAGER or ‹ to choose a pager number
Destination:
PHONE EXT PAGER
destination.
8. Press NEXT or £ to continue.
Notify:pager
CHNG
NEXT
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
7 6 Off-premise Message Notification
Setting up Off-premise Message Notification to more than one
destination
You can receive notification of a message at a maximum of five different
destination numbers assigned by you. The following steps show you how to enter a
phone number destination and then add a pager destination for the first time. To set
up Off-premise Message Notification to more than one destination number:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
3. Press ADMIN or °.
0 new 0 saved
PLAY REC
ADMIN
4. Press fl to open the Off-premise Message
Mailbox admin
GREET PSWD QUIT
Notification menu.
5. Press ADMIN or ⁄ to set up Off-premise Message
Msg notify
ADMIN
SELECT
Notification.
6. Press PHONE or ⁄ to choose a destination phone
Destination:
PHONE EXT PAGER
number.
7. Enter the destination phone number and press OK or
£. The destination phone number cannot be longer
than 30 digits.
Ph:
RETRY
OK
OK
8. Press OK or £ to accept the destination phone
number. The <x> represents the phone number. Press
ADD or ¤ to add special characters. For information,
press OK or £ to accept the destination number.
<x>
ADD
9. Enter the start time for Off-premise Message
Notification. This is a four-digit field. Any single-digit
hour and minute must be preceded by a zero.
Start hhmm:
RETRY
OK
10. Press AM or ⁄ or PM or ¤.
<start time>
RETRY
AM
PM
OK
11. Press OK or £ to accept the start time.
<start time>
RETRY
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Off-premise Message Notification 7 7
12. Enter the time when Off-premise Message
Stop hhmm:
RETRY
OK
Notification is to stop. This is a four digit field. Any
single-digit hour and minute must be preceded by a
zero.
13. Press AM or ⁄ or PM or ¤.
14. Press OK or £ to accept the stop time.
15. Press NEXT or £.
<stop time>
RETRY
AM
PM
OK
<stop time>
RETRY
Notify 2:pager
CHNG OTHR
NEXT
NEXT
16. Press NEXT or £ to continue. Press SETUP to add
Notify 3:none
SETUP
another destination.
17. Press NEXT or £ to accept the start time that you
Start:<start time>
CHNG
NEXT
entered. Press CHNG or ⁄ to change the start time.
Note: Steps 18 and 19 allow you to review the start
and stop times.
18. Press NEXT or £ to accept the stop time that you
Stop:<stop time>
CHNG
NEXT
entered. Press CHNG or ⁄ to change the stop time.
19. You can choose to be notified of all new messages or
urgent messages only. Press OK or £ to accept the
default message type new. This means you are notified
whenever you receive a new message. Press CHNG or
⁄ to change the message type to urgent. If you
change the message type to urgent you are notified
only when you receive an urgent message.
Msg type: new
CHNG
OK
20. Press ® to end the session.
Msg notify
ADMIN
SELECT
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
7 8 Off-premise Message Notification
Deleting an Off-premise Message Notification destination number
If you have set up more than one destination number in Off-premise Message
Notification, you are given the option to delete the destination(s). To delete an Off-
premise Message Notification destination:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
ADMIN
QUIT
3. Press ADMIN or °.
0 new 0 saved
PLAY REC
4. Press fl to open the Off-premise Message
Mailbox admin
GREET PSWD
Notification menu.
5. Press ADMIN or ⁄ to set up Off-premise Message
Msg notify
ADMIN
SELECT
NEXT
Notification.
6. Press OTHR if you want to delete the first destination,
or press NEXT or £ to scroll through the destinations
until you find the destination that you want to delete.
When you find the destination that you want to delete,
press OTHR.
Notify 1:<x>
CHNG
OTHR
Note: The <x> represents the type of destination
(phone, extension or pager).
7. Press DEL to delete the first destination number.
Notify 1:<x>
DEL INS
QUIT
NEXT
8. The first destination number is deleted. The Notify 2
destination changes to become the Notify 1
destination number.
Notify 1:<x>
CHNG OTHR
Note: To delete more destination numbers, press
OTHR and repeat steps 6 and 7. When you are
done deleting destination numbers, press ®
to end this session.
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Off-premise Message Notification 7 9
Inserting an Off-premise Message Notification destination number
You have the option to insert destination number(s) if you have more than one
destination number. To insert an Off-premise Message Notification destination:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
3. Press ADMIN or °.
0 new 0 saved
PLAY REC
ADMIN
4. Press fl to open the Off-premise Message
Mailbox admin
GREET PSWD QUIT
Notification menu.
5. Press ADMIN or ⁄ to set up Off-premise Message
Msg notify
ADMIN
SELECT
NEXT
Notification.
6. Press OTHR to insert a new destination number in the
first Off-premise Message Notification position
(Notify 1), or press NEXT to scroll through the
destinations until you find the destination position that
you want to replace, and then press OTHR.
Notify 1:<x>
CHNG OTHR
Note: The <x> represents the type of destination
(phone, extension or pager).
7. Press INS to insert a destination number.
Notify 1:<x>
DEL
INS
QUIT
NEXT
Note: The <x> represents the type of destination
(phone, extension or pager).
8. Press SETUP to set up a new destination number, and
follow the steps in Setting up Off-premise Message
Notify 1:none
SETUP
Note: When you are done inserting destination
numbers, press ® to end this session.
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
8 0 Off-premise Message Notification
Turning Off-premise Message Notification on and off
You can turn Off-premise Message Notification on or off at any time. When you
turn Off-premise Message Notification off, you do not affect any of the assigned
you turn Off-premise Message Notification is on, you are notified whenever you
receive a message during the time you specified.
To turn Off-premise Message Notification on and off:
1. Press ƒ·°⁄ to open your mailbox.
2. Enter your mailbox password and press OK or £.
Pswd:
OTHR
RETRY
OK
ADMIN
QUIT
3. Press ADMIN or °.
0 new 0 saved
PLAY REC
4. Press fl to open the Off-premise Message
Mailbox admin
GREET PSWD
Notification menu.
5. Press SELECT or ¤.
Msg notify
ADMIN
SELECT
OK
6. Press CHNG or ⁄ to turn Off-premise Message
Notify on
CHNG
TIME
Notification off if it is on (as shown).
7. Press OK or •.
Notify off
CHNG
TIME
OK
Note: Press TIME to review the start and stop time
parameters.
8. Press ® to end the session.
Mailbox admin
GREET PSWD QUIT
A person who receives an Off-Premise Message Notification call can cancel Off-
premise Message Notification to their destination number. This is useful if a
destination is incorrectly programmed and a wrong party receives the calls. The
recipient of an Off-premise Message Notification call hears the following voice
prompt: “Message for (name of mailbox owner). To log in press ⁄. If you have
received this call by mistake, please press ¤.
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a call
11
Introduction
ƒ·°· allows you to record an active telephone call and place the
resulting message in your mailbox. Before you activate the Call Record feature, ask
the parties on the call for permission to record the call.
The maximum length of the Call Record message is determined by the Class of
Service setting for your incoming message length. If the mailbox message length is
surpassed, the voice prompt “Recording stopped. The recording limit has been
reached” plays and the recording ends. After Call Record stops, you can re-activate
ƒ·°· to start another record call session. The call is recorded in two
separate messages if this occurs. Ask your System Administrator for the message
length that is assigned to your mailbox.
Note: Call Record is not enabled by default. The System Administrator must
enable this feature by assigning you a Class of Service that supports Call
Record. In some areas Call Record is not available as it contravenes local
laws. Ask your System Administrator about the availability of Call Record
in your area.
Using Call Record
After a call is recorded, Enterprise Edge Voice Messaging places the recorded call,
as a message, in the mailbox associated with the extension that activated the Call
Record feature. The call includes alternate extensions associated with the mailbox.
The Call Record message can be forward to other mailboxes. For more information
on forwarding messages, refer to Forwarding a copy of a message to one or more
To record a call:
1. While on an active call, press ƒ·°·.
Other parties on the call may hear hold tones while the
system conferences in Enterprise Edge Voice
Messaging.
Before the call begins recording, the prompt “This call
is being recorded” plays to all the parties on the call
and then a recording tone plays.
2. Press QUIT to stop the call recording. The Call Record
message is left in your mailbox.
Recording
PAUSE
QUIT
Press PAUSE to suspend the call recording. Press
RESUME to continue call recording or press QUIT to
stop the call recording.
If the message is stopped, all the parties on the call
hear “Recording stopped”.
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
8 2 Recording a call
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Enterprise Edge Voice Messaging Tips
12
Introduction
This chapter describes some easy to follow guidelines to optimize using Enterprise
Edge Voice Messaging.
Enterprise Edge Voice Messaging Tips
To take advantage of Enterprise Edge Voice Messaging and its many features:
Listen to your messages frequently. Answer your messages promptly to
encourage callers to use Enterprise Edge Voice Messaging and reassure them that
it is as reliable as speaking with you personally.
You do not have to be at your desk to play your messages. When you are away from
your desk, you can play your messages from any touch tone phone.
Clean up your mailbox. There is limited storage in your mailbox and within
Enterprise Edge Voice Messaging. Do not save messages unless you need to listen
to them again. When you are finished with a message, erase the message to free
storage space for yourself and other mailbox owners.
Keep a record of your password in a secure place. Treat your Enterprise Edge
Voice Messaging password as a secret code. Write down your password and keep
it in a safe place. Do not keep your password near your telephone. If you let
someone else have temporary access to your mailbox, change your password
afterwards. If you forget your password, the System Administrator can reset it to the
default password 0000. You can then enter a new password.
When sending messages, make them brief and to the point. More than 75% of
the time spent on a normal business telephone call consists of making small talk,
pleasantries and other socializing. Sending a message rather than making a call can
save you time. Try to avoid sounding hurried or rude while restricting your
messages to the essentials.
Change your Primary greeting frequently. It is a good idea to change your
Primary greeting on a regular basis. Change your greeting to indicate that you listen
to your messages and maintain your mailbox on a regular basis. Change your
Primary greeting to provide a personal touch that frequent callers appreciate.
Make your Alternate greeting specific. Choosing an Alternate greeting usually
means you are away from the office. If you are out of the office, indicate in your
Alternate greeting when you expect to return. If you check your mailbox even
though you are out of the office, make that clear. If callers can reach you at another
phone number, ensure that your message includes the phone number and the time
period of the temporary arrangement. If you are going to be out of the office,
remember to forward your telephone to Enterprise Edge Voice Messaging.
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
8 4 Enterprise Edge Voice Messaging Tips
Extended Absence Greeting. Begin this greeting by announcing your vacation or
travel plans. This gets the attention of the caller. For example, “Vacation alert! Hi,
this is Marshall. I will be on vacation starting on the 5th, and I will be returning to
work on the 12th. If you care to do so, please leave a message and I will return your
call when I return from vacation. For immediate assistance, please press zero.”
Record your greetings and messages clearly. For a better quality recording, speak
directly into the handset. Do not use the Handsfree feature. Remember to speak
clearly with a pleasant voice at a pace that is easy to understand. Do not speak too
softly or loudly or make the greeting or message too lengthy. After you record a
greeting or message play it back. Make sure that your greeting or message sounds
the way you want it to before you accept it.
Do not forget to use the Copy and Reply features. You can use Enterprise Edge
Voice Messaging to send copies of messages to other mailboxes and reply to
messages with a message of your own. When you send copies of messages to other
people, ensure that your introduction explains why you are forwarding a copy of the
message. Is the copy for information only? Is the message meant for the person to
whom you are forwarding it? Who is responsible for the action on the message?
Use Group Lists for multiple copies of messages. If you find that you regularly
send the same message to several different people, ask the System Administrator to
create a Group List for you. With a Group List, you can send the same message to
all the mailboxes in the Group List.
Encourage Enterprise Edge Voice Messaging use. Old habits are sometimes hard
to break, and some people have difficulty accepting or even trying new
technologies. Use your Personal mailbox and other Enterprise Edge Voice
Messaging features, and encourage your co-workers and frequent callers to use
them too.
Report problems promptly. If you encounter problems using Enterprise Edge
Voice Messaging, report the trouble to the System Administrator as soon as
possible.
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
13
Introduction
This chapter describes some problems that can occur while you are using Enterprise
Edge Voice Messaging. This chapter includes a list of typical problems and what to
do when they occur.
The problems you encounter while using Enterprise Edge Voice Messaging are
usually operating problems. Sometimes a difficulty occurs that indicates a system
problem with the Enterprise Edge server. If events occur that are not covered in this
chapter, report them to your System Administrator immediately.
The Automated Attendant transfers some callers to the General Delivery Mailbox.
Enterprise Edge Voice Messaging requires a tone signal and a minimum voice
level. If a response is not received, the caller is automatically transferred by the
Automated Attendant to the Enterprise Edge Voice Messaging operator. If the
operator is not available, the call transfers to the General Delivery mailbox.
Possibly the extension called does not have a mailbox assigned to it. Ask your
System Administrator to verify that the mailbox is assigned to the extension
Feature 981 produces a LOG prompt on my Enterprise Edge display.
Whenever the Log: prompt appears on the display, it can be caused by:
•
•
Possibly the extension you are using does not have an operating mailbox. If the
extension does not have a mailbox, Enterprise Edge Voice Messaging requests
both a mailbox number and a password.
A Guest mailbox that normally does not have an assigned extension. Ask your
System Administrator to verify that your extension is properly assigned to your
mailbox.
My telephone cannot be forwarded to Enterprise Edge Voice Messaging.
If you are attempting to forward your extension to Enterprise Edge Voice
Messaging and the display shows Not in service you might be forwarding to the
wrong extension number. Use feature code 985 to verify you are calling the correct
Enterprise Edge Voice Messaging extension number.
My mailbox is not accepting messages.
A mailbox accepts messages only after the mailbox is initialized. A mailbox cannot
receive messages until it is initialized by the mailbox owner. Initialize your
mailbox. Refer to the Enterprise Edge Quick Reference Guide or to Chapter 3 of
this guide.
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
8 6 Troubleshooting
My name is not played in the Company Directory.
Check to ensure that your mailbox is initialized. If it is not initialized, your name is
not played in the Company Directory and your mailbox cannot receive any
messages. If you have recorded your Company Directory name, ask your System
Administrator to ensure that the Company Directory Override is set to YES.
I have forgotten my mailbox password.
A forgotten password cannot be recovered. Your old password must be reset to the
default password of four zeros (0000). After the System Administrator has reset
your password, you must open your mailbox and change the default password.
I attempt to access my mailbox and I hear the recording: “This mailbox has been locked to
prevent unauthorized access. Please contact your administrator for assistance.”
Your mailbox is assigned a maximum number of incorrect password attempts.
Enterprise Edge Voice Messaging records the number of incorrect attempts from
the last time your mailbox was successfully accessed. After the number is passed
you are “locked-out”. Your mailbox cannot be opened again until the System
Administrator resets the password.
Enterprise Edge Voice Messaging Timeout
The Enterprise Edge Voice Messaging Timeout feature allows five seconds for you
to choose an option. If Enterprise Edge Voice Messaging does not detect a
selection, the Automated Attendant replays the option list. If an option is still not
selected, Enterprise Edge Voice Messaging ends the session.
Enterprise Edge Voice Messaging has minimum voice level detection. If Enterprise
Edge Voice Messaging does not detect an audio signal, it requests the caller to
speak louder and provides the option to re-record. If no voice level is detected after
the prompt, Enterprise Edge Voice Messaging ends the session.
Messages are cut off
If people need to leave long messages in your mailbox (up to 10 minutes), you can
ask the System Administrator to give you more message recording storage space.
I attempt to listen to my messages and I hear the recording: “Your mailbox is full. You must
erase some messages before you can listen to new messages.”
Your mailbox is equipped with the Never Full Mailbox feature, which allows a
caller to leave a message in your mailbox, even if the mailbox is “full”. The
message is stored, but cannot be accessed until you delete at least one saved
message. If you find that you need more message time in your mailbox, ask your
System Administrator to give you more storage space.
Wrong prompt language
If the wrong language appears on the display of your Enterprise Edge telephone, ask
the System Administrator to change this.
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting 8 7
Outbound Transfer does not work.
Ensure that you have recorded the correct instructions for callers in your personal
Ensure that the destination number you enter is not restricted. For example, if you
cannot call long distance numbers from your telephone, then you cannot set up
Outbound Transfer to a long distance number.
Check to see if Outbound Transfer is turned on. Refer to Turning Outbound
Off-premise Message Notification does not work
If Off-premise Message Notification does not work, ask the System Administrator
to check the Off-premise Message Notification parameters. Also, ask the System
Administrator to check if you are allowed to have Off-premise Message
Notification. Ensure that the destination phone number and time parameters are
correct.
Ensure that the destination number(s) that you enter are not restricted. For example,
if you cannot call long distance numbers from your telephone, then you cannot set
up Off-premise Message Notification to a long distance number.
Check to see if Off-premise Message Notification is turned on. Refer to Turning
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
8 8 Troubleshooting
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A:
Default values and tone commands
Default mailbox numbers for the General Delivery mailbox
s
Mailbox number
length
Default General
Delivery Mailbox
number
2
3
4
5
6
7
10
100
1000
10000
100000
1000000
If the Group List leading digit is one then the default General Delivery mailbox
numbers begin with two.
DTMF tone commands for setting up Off-premise Message Notification
Option function
Dialpad button
Review number
⁄
¤
‹
›
fi
fl
£
•
Enter more digits
Insert a timed pause (4 sec)
Recognize dial tone (1.5 sec)
Insert a # button tone
Insert a * button tone
Accept number
Cancel and re-enter
If Enterprise Edge Voice Messaging is installed with PBX or Centrex+ and you
want to access an outside line, you must enter the command to recognize a dial tone.
For example, enter · to access an outside line, press £ and then › to recognize
dial tone and then press ¤ to enter more digits. Enter the destination number, press
£ and any required pauses. Each pause entered is four seconds long. For
definitions of Pause, Recognize dial tone and Enter more digits, refer to the
Glossary.
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
9 0 Appendix A: Default values and tone commands
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Administration
The tasks involved in maintaining the Enterprise Edge Voice Messaging mailboxes,
greetings and set up configuration.
Alternate greeting
A greeting recorded for a Personal mailbox and played on occasions such as
absence, illness, or vacation.
Attendant sign On/ Off
The task performed by a company receptionist or Operator that indicates to
Enterprise Edge Voice Messaging when an Operator is available to answer calls.
Automated Attendant
The Enterprise Edge Voice Messaging answering service that answers incoming
calls with a Company greeting, plays a list of Enterprise Edge Voice Messaging
options to a caller and performs call routing functions in response to a caller’s
dialpad selections.
Broadcast Message
A message that can be sent only by the System Administrator. This type of message
plays in all initialized Personal mailboxes and plays immediately after the mailbox
is opened. It is automatically erased after the mailbox owner listens to the message.
Business Status
A Enterprise Edge Voice Messaging setting that tells Enterprise Edge Voice
Messaging whether a company is closed or open for business.
Class of Service
A predetermined number designation that specifies the Enterprise Edge Voice
Messaging Options for a mailbox.
Company Directory
An internal voice list that contains the names of users with initialized mailboxes
designated to appear in the Company Directory.
Conventions
The way certain information is described. For example, using underlined text to
represent second-line display prompt information.
Default
The parameters preset in the Enterprise Edge Voice Messaging system.
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
9 2 Glossary
Designated Operator
An individual in a company who is assigned to answer the Enterprise Edge Voice
Messaging Operator Request option.
Display
A one-line or two-line screen on an Enterprise Edge telephone that shows
Enterprise Edge Voice Messaging commands and options.
Display buttons
The three buttons that appear on an Enterprise Edge two line display display. When
pressed, these buttons select the specified Enterprise Edge Voice Messaging option.
Display options
The choices available to a user that appear on an Enterprise Edge two line display
display. Options appearing on the display can be selected using the display or
dialpad buttons
Enterprise Edge ATA 2
An Enterprise Edge product that allows you to connect an analog device, such as a
single-line telephone or a facsimile machine, to an Enterprise Edge Voice
Messaging system.
Envelope information
A date and time stamp that appears on all messages left in a mailbox. If the message
is left by another mailbox owner, envelope information includes the message
sender’s name.
Extension
A two-digit to seven-digit number used to reach a designated telephone. Also an
Enterprise Edge internal telephone.
Feature code
A unique three-digit code used to access Enterprise Edge Voice Messaging features
and options.
General Delivery mailbox
One of the two Special mailboxes used to collect messages for individuals in a
company who have not been assigned a Personal mailbox.
Greetings
There are three types of Enterprise Edge Voice Messaging greetings: Company
greetings, Personal mailbox greetings and Information greetings. Company
greetings play by the Automated Attendant to incoming callers. Personal mailbox
greetings play to callers who want to leave a message in the selected mailbox.
Information mailbox greetings play to describe goods or services available to
callers.
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary 9 3
Group Lists
A collection of mailbox numbers assigned to a special group name and number by
the System Administrator. If a message is sent to a Group List, all mailboxes
contained in the list receive the same message.
Guest mailbox
A mailbox assigned to a user who does not have an extension.
Information mailbox
A mailbox that provides a caller with a message describing goods or services
available from your company.
Initialize mailbox
Preparing a mailbox to receive messages, which includes changing a mailbox
default password and recording a Company Directory name.
Leave Message
The feature code used to leave messages in Enterprise Edge Voice Messaging
mailboxes.
Mailbox
A storage place for voice messages on the Enterprise Edge Voice Messaging
system.
Mailbox number length
The number of digits allowed in a mailbox number. The mailbox number length
ranges from two to seven digits.
Mailbox overrides
Mailbox overrides are optional parameters in addition to the Class of Service
values. The mailbox overrides are: Include in Company Directory, Alternate
Extensions, Fax line (virtual), Call Screening, Message Waiting Notification and
Outdial route.
Message Delivery options
Message sending options stamped onto a message. There are five Message Delivery
Options: Normal, Certified, Urgent, Private and Timed. A Message Delivery
Option can be assigned to a message after it has been recorded.
Message Waiting Notification
A display prompt that informs a mailbox owner when a message has been left in a
mailbox. This feature is a mailbox override.
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
9 4 Glossary
Never Full mailboxes
Your Enterprise Edge Voice Messaging mailbox is equipped with the Never Full
mailbox feature, which allows an external caller to leave a message in your
mailbox, even if the mailbox is “full”. The message will be stored, but cannot be
accessed until you delete at least one saved message.
Off-premise Message Notification
The Enterprise Edge Voice Messaging feature that calls destination numbers that
you set up, to let you know you have a new or urgent message. This feature is a part
of the Class of Service.
Operator Status
The Enterprise Edge Voice Messaging indicator that determines if a company’s
receptionist or Designated Operator is available.
Option
A Enterprise Edge Voice Messaging choice that is given to a user through voice or
display prompts.
Password
A four- to eight-digit number that is entered on the dialpad. A password is used to
open mailboxes or perform configuration tasks.
Pause
Pause is used when setting up pager notification. Each pause entered is
automatically four seconds. For voice pagers, pauses are entered after the pager
number to delay the start of the Enterprise Edge Voice Messaging voice prompt that
activates the pager. For alphanumeric pagers, pauses are entered after the pager
number and before the digits that appear on the pager display.
Personal mailboxes
Mailboxes assigned to users as a place to store messages.
Primary greeting
The main greeting played in a Personal mailbox.
Programmable memory buttons
Buttons on the Enterprise Edge one line and two line display telephones that can
store feature codes and numbers.
Recognize dial tone
After accepting the Outbound Transfer or Off-premise Message Notification
destination phone number, entering › adds a D to the digit string. The Enterprise
Edge system uses this to recognize dial tone when an access code is required.
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary 9 5
Resetting passwords
A System Administrator task that changes a mailbox password from its current
setting back to the Enterprise Edge Voice Messaging default setting 0000 (four
zeros).
Special mailboxes
The two mailboxes used by the System Administrator and designated Enterprise
Edge Voice Messaging Operator. The two Special mailboxes are System
Administrator and General Delivery.
System Administrator
The person responsible for configuring, updating, and maintaining the Enterprise
Edge Voice Messaging system.
System Administrator mailbox
One of the two Special mailboxes. This mailbox is used by the System
Administrator for sending Broadcast Messages. This is also the System
Administrator’s Personal mailbox.
Touch tone phone
A push-button telephone that emits DTMF tones.
Voice prompts
The prerecorded voice instructions that play when you access the different
Enterprise Edge Voice Messaging features and options.
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
9 6 Glossary
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Changing
A
Activating
Off-premise Message Notification
Outbound Transfer
Adding special characters
pause characters 71
Alert tone 52
choosing whether mailbox accepts
Character limit
for Off-premise Message Notification
destination pager number and message
using 31
Assigning
for Off-premise Message Notification
Assigning a Target Attendant
Automatic disconnection from Information
B
C
Call Forward on Busy
Call Forward with Caller ID
for Outbound Transfer
to other recipients 50
using CC 50
Call Screening
D
Deleting
purpose 39
Calls
transferring
Destination number
when Enterprise Edge Voice Messaging is
behind PBX or Centrex
to receptionist 35
Canceling
Destination pager number
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
98 Index
Destination telephone number
Directory number sent as default pager message
recording 32
E
Entering characters
purpose 28
recording
Enterprise Edge ATA 2
no Message Waiting Notification capability
Enterprise Edge one-line display telephones
using 9
Enterprise Edge two-line display telephones,
using 10
Enterprise Edge Voice Messaging
types of 27
Group message
Guide, organization 7
H
using
Hold tone 39
Home menu 57
with touch tone telephone 35
I
Information greeting
F
Information message
CCR 57
L
Listening to your messages. see Playing your
mailbox messages
M
Mailbox
programming 24
Forwarded messages
G
full 35
purpose 14
used when Personal mailbox not available
Mailboxes
Greetings
General Delivery
purpose 14
Guest 14
using 31
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
Index 99
User 13
O
Off-premise Message Notification
destination number
Making selections using the dialpad
with Enterprise Edge one-line display
telephones 9
Memory buttons 21
Message Delivery options
destination pager number and message
not working 87
Certified 44
Urgent 44
setting up
to a telephone number 66
Off-premise Message Notification parameters
Message Waiting Notification
not available with Enterprise Edge ATA 2
Messages
Opening your mailbox
remotely 17
using CC 50
cut off 86
erasing 36
Group 41
Outbound Transfer
destination pager number
destination telephone number
pausing 37
rewinding 36
skipping to end 36
the Envelope 36
quitting 37
setting up
to a telephone number 61
P
“locked-out” 86
recording 42
example 20
sending 42
recording technique 27
Personal Mailbox
Guest 13
sending to multiple recipients 42
N
Name
User 13
Personal messages addressed to a Group List
P0908524 Issue 01
Enterprise Edge Voice Messaging Reference Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
100 Index
Outbound Transfer
to a telephone number 61
recording 32
Prerequisites, for using guide 7
Primary or Alternate greeting
choosing 31
Special characters
Special mailboxes
Stopping unwanted Off-premise Message
Private messages
T
Transferring
Programming a memory button
R
Recording
Transferring calls
Recording technique
to receptionist 35
U
Urgent messages
V
on an Enterprise Edge one-line display
telephone 12
to an external message sender
using the MSG option 48
Routing messages from General Delivery
S
to multiple recipients 42
Setting up
Off-premise Message Notification
to a telephone number 66
Enterprise Edge Voice Messaging Reference Guide
P0908524 Issue 01
Download from Www.Somanuals.com. All Manuals Search And Download.
|