Owner’s Manual
MEDIAMASTER
9600 C
Download from Www.Somanuals.com. All Manuals Search And Download.
The sky is the limit with your Mediamaster. It‘s easy to use, always at your command and adaptable
for future advances.
To begin with, you will find it necessary to read these instructions but you will soon find yourself com-
petent without them.
Contents
For your safety
For your safety
Rear panel/Front panel
Installation
Connecting the Mediamaster to the TV set
Preparing the remote control
Remote control
About the Smart Card and CA Module
Basic Settings
The Welcome Menu
Viewing TV
Important general information
Start/stop watching TV
TV Guide
3
4
5
5
7
8
9
• Keep a clear space around
the Mediamaster to allow
for sufficient ventilation.
• Do not cover the Media-
master or place it on a unit
that emits heat.
• Use a soft cloth and a mild so-
lution of washing-up liquid to
clean the casing.
10
10
11
11
11
12
13
14
16
16
16
17
17
17
18
18
19
19
19
20
21
22
• Nokia is proud to offer a high
quality product. To keep this
level of quality, service should
be carried out only at a Nokia
authorised service centre.
Volume level
List of TV channels and Radio channels
How to show the Main Menu
The TV Guide and Radio Guide
TV Channels and Radio channels
Parental Control
Installation
Common Interface
Cable Network settings
Channel Search
Create a Favourite List
Language Settings
System Settings
First time Installation
Glossary of terms
• Do not connect or modify ca-
bles when the Media-master
is plugged in.
• Do not remove the cover.
• Do not allow the unit to be ex-
posed to hot, cold or humid
conditions.
• Please note that the only way
to isolate the Mediamaster
completely from the 230 V
mains supply is to unplug the
mains lead!
Technical Specifications
GB 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear panel
Mains lead
230 V AC
+/- 15%,
50 Hz
TV / VCR
0/12 VOLT TV
Not used SCART Connec-
AUX
for an RF-cable
to the aerial
input of the TV
set or a Video
Recorder
Input SCART connection
for e. g. an analogue
satellite receiver or a
second Video recorder
(playback only)
tion to the TV set
ANTENNA
Connection to
the cable
network socket
AUDIO L R
VCR
RS232
for a printer,
PC or a high
speed modem high-speed data
equipment
SCSI
For a CD-ROM
player or other
Stereo outputs
for connection
to a HiFi system
for the ordinary
Video recorder
(record and playback)
Front panel
Display
shows programme information.
At start up, it displays software and boot/loader number
Welcome
Slot
to turn the receiver
on/off (standby)
for the CA Module
and Smart Card
Select channel
number, up/down
GB 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
The box for your Mediamaster should contain the
following items:
• the Mediamaster
3
6
9
2
5
8
1
4
7
0
TV
GUIDE
MENU
• a remote control handset with batteries.
• a fully featured SCART cable for connection to the TV set.
• Owner’s Manual.
EXIT
OK
TEXT
SCART cable
About the SCART sockets
• On the back side the Mediamaster is equipped with 3 SCART
sockets (see figure). When you connect external sets to any
of theese sockets, always use fully featured SCART cables.
There are “slimmed” (=cheap) SCART cables on the market,
but it is not sure that e. g. your videorecorder will work OK with
some of these cables.
SCART socket
• SCART cables are also necessary to get stereo sound from a
stereo TV and video recorder.
Connecting the Mediamaster to the TV set
As most local cable networks are distributing TV programmes
from both digital and analogue sources, the signals from the
wall outlet will be of two different kind:
1) Digital signal information to be handled by the Mediamaster.
These signals are sent to the TV through the SCART cable.
2) Analogue signals which are bypassed to the TV through a
RF cable.
Due to that you must connect the Mediamaster to the TV set
as described below.
• Connect the SCART cable between the TV SCART socket on
the back of the Mediamaster and the SCART input socket on
your TV.
• Connect the RF cable between the TV/VCR connection on the
Mediamaster and the ordinary areial socket on the TV set.
• You also must have another RF cable between the ANTENNA
input on the Mediamaster and the network socket.
GB 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a TV and a video recorder
Refer to your video recorder manual for full instructions.
• Connect one SCART cable between the TV and the
TV SCART socket on the Mediamaster.
• Connect another SCART cable between the video
recorder and the VCR SCART socket on the
Mediamaster.
• A RF cable has to be connected between the
TV/VCR output on the Mediamaster and its corresponding
input on the Video recorder.
• Finally, connect another RF cable from the RF output on the
video recorder to the TV aerial input on the TV.
Connecting to an analogue satellite receiver and a video recorder
• Connect one SCART cable between the TV and the TV SCART
With Video recorder
socket on the Mediamaster.
• Connect one SCART cable between the TV SCART socket
on the analogue satellite receiver and the AUX
SCART socket on the Mediamaster.
VCR
• Connect one SCART cable between the video
recorder and the VCR SCART socket on the
Mediamaster.
• Connect a RF cable from the RF output on the video recorder
to the TV aerial input on the TV.
• Connect a RF cable from the TV/VCR socket on the Media-
master to the RF input on the video recorder.
• Connect a RF cable from the aerial socket to the socket
marked ”ANTENNA” on the Mediamaster.
Analogue receiver
Without the VCR, you should connect as shown
in the diagram to the right.
Analogue receiver
GB 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Hi Fi system
• Connect an RCA/Cinch stereo cable from the AUDIO L R sock-
ets on the Mediamaster to the LINE, AUX, SPARE or EXTRA
input sockets on your Hi Fi system.
Preparing the remote control
• Remove the cover on the battery compartment at the bottom
of the remote control handset.
• Insert the 2 x AAA (1,5 V) batteries, as shown in the diagram,
taking care to observe the + and - markings indicated inside.
• Replace the cover.
Switching on for the first time
You can now plug in the mains plug of the Mediamaster to the
wall socket.
• Switch on your TV set.
• When the Mediamaster is connected to the TV set, you will
now see a welcome message on the screen. You may now
proceed to page 10 “Basic Settings”.
However, we recomend that you read the other information
on the preceding pages first.
Before you continue...
please read this concerning menus
A menu is a field of text shown on the TV screen. These menus
contain different kinds of information and give the possibility to
select between alternatives.
In the bottom part of the screen you will normally also have a
short explanation of your options.
A menu may contain several lines. Selectable lines are high-
lighted. Non highlighted lines are not selectable.
GB 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
This section describes how to operate the Mediamaster using the buttons on the remote control.
To turn the Mediamaster on/off (standby).
Press once to switch to audio language/audio track
(if available). Press twice to switch to Radio mode.
TV
To leave a menu and go back to watch a TV pro-
gramme. To switch from Radio Mode to TV Mode.
To toggle between terrestrial TV, VCR, analogue and
the digital satellite signal.
0 - 9
To select channel number and other numerical
commands.
GUIDE
To obtain a list of present and coming programs for
the available channels. This information is only
shown if your Service Provider transmits pro-
gramme information.
MENU
EXIT
To display the ”Main menu” screen.
Double arrow
To go back one level in the menus.
To return to the Main Menu from a Submenu.
UP
i
To give short and extended information (if transmit-
ted) about the current/next programme.
LEFT
RIGHT
DOWN
LEFT/RIGHT To move in left/right direction within the menus.
BUTTONS
Double arrow
UP/DOWN To move in an up/down direction in the menus.
BUTTONS To select TV and audio channels.
DOUBLE
ARROWS
To step pages or change channels up or down in the
menus. (In blocks of 10).
OK
To confirm choices, etc.
Select TV/Radio channel list.
+ -
To increase or decrease the volume level of the
Mediamaster. The Mediamaster’s maximum level is
controlled by the TV:s present volume setting. The
volume adjustment also alters the volume level to
your video recorder.
To turn the sound on /off (mute).
TEXT
To select teletext information.
Press once to change teletext subtitle.
Press twice to enter teletext (if available).
GB 8
Download from Www.Somanuals.com. All Manuals Search And Download.
About the Smart Card and CA Module
To be able to receive pay-TV channels you will need a CA Mod-
ule and a Smart Card from the Service Provider of your choice.
The Service Provider is the distributor of the programmes.
If you are subscribing to services from more than one Service
Provider, you might have to change between different CA Mod-
ules and Smart Cards.
Please note, that a smart card is connected to a single Service
Provider and due to this, a specific range of channels.
Only "free" channels are available without the Smart Card.
Note: The mains plug must not be plugged in before inserting
the CA module!
• Insert the CA module fully into the slot behind the lid in the
front panel of the Mediamaster so that the arrow on the
module faces upwards and inwards.
• Insert your card fully into the slot on the CA module, so that
the microchip (the yellow spot) faces upwards and inwards.
After inserting the card, leave it in the slot permanently. Do not
remove it again, unless your Service Provider asks you to do so.
This is important, because if your Service Provider wants to
download new information to the Mediamaster, the card has to
be in the slot.
Please note, that the CA module and the Smart Card may give
special menus not described in this Manual.
PIN Code
The card is loaded with a 4-numbered code, also called a PIN code
(Personal Identification Number). Normally the PIN code is 0000
or 1234.
The code is essential for the future extra services offered by the
Service Provider.
GB 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Settings
The Welcome Menu
To install the Mediamaster properly you have to adjust a few set-
tings. You will always be guided by the information at the bottom
of the menus.
When you have finished the final part of the setup procedure you
can start watching TV channels and listen to Radio channels.
By now you should have the “Welcome Menu” on the TV screen.
Press the OK button to proceed.
Language selection
Select the desired language. This will define the language shown
in the menus. It will also select this language as the main lan-
guage in cases where more than one is transmitted for speech
and subtitling in movies.
Channel Search
From the Channel Search menu the Mediamaster will automati-
cally search for TV and Radio channels digitally transmitted from
the Cable Network.
The search will be performed in a predetermined way, and all
channels found will be listed in two columns on the screen.
TV channels will be listed in one column, Radio channels in the
other.
Please note, that the search procedure may take a few minutes.
When the search procedure is finished the indication
“Ready. To watch TV press OK” will appear in the bottom part
of the menu.
When you press OK a new menu superimposed upon the TV pic-
ture appears, where you have the opportunity to adjust the
clock*). This is done with the UP/DOWN buttons, ±1/2 an hour
at a time.
Press OK and you are ready to watch TV.
*) This menu will only appear the first time you perform settings
from this Menu.
GB 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing TV
Important general information
The following will describe the basic functions of your Media-
master during the watching of TV or listening to Radio channels
from the Mediamaster. Sometimes the information may not be
displayed as illustrated. Many of the functions described here are
dependent on the Service Provider and/or can only be used if they
are included in the transmitted programme information.
Please note, that during the Channel Search procedure, the
Mediamaster has downloaded ALL available channels. This may
include channels from various Service Providers, also those to
which you normally do not have access, (unless you have a Smart
Card from one of those Service Providers).
If you select a programme to which you do not have access, you
will get the message “No Smart Card” or “No Access” on the
screen.
IMPORTANT! To toggle between the digital and analogue chan-
nels from the Mediamaster you must use the TV button on the
Mediamaster remote control. (Both digital and analogue signals
are sent to the Mediamaster in the antenna cable).
During watching analogue programmes the Mediamaster display
will show the word “TV”. In this mode you select channels on
the TV the same way as before you installed the Mediamaster.
During watching digital programmes the Mediamaster display will
show the name of the channel. In this mode you select TV chan-
nels with the Mediamaster remote control.
Ref. to the connection description on page GB 7.
Start/stop watching TV
To start the Mediamaster from stand-by mode, press the but-
ton, TV button or one of the number buttons on the remote con-
trol.
It is also possible to start by pressing the
lid on the front of the Mediamaster.
button behind the
Put the Mediamaster into stand-by by pressing the
button.
In stand-by mode the display will show the correct time.
Select Channel
Change channel with the numbered buttons or with the
up/down buttons on the remote control. You can also use the
buttons on the front panel of the Mediamaster.
GB 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme Information. The “i“ Button
Every time you change channel you will receive information for
4-5 seconds about the current programme. This information in-
cludes: Channel number, name, title and time.
Press “i” while watching a channel. If your Service Provider trans-
mits programme information you will see:
Correct time;
A small amount of information for the current and next pro-
gramme. (Alternate between “Now” and “Next” with the left/
right buttons);
Name and number of the channel;
Finally the start and stop time for the programme.
From here you also can obtain information about other channels.
Select with the up/down buttons. If you stop on another chan-
nel number and press OK, you will exit the menu and return to
TV mode, but now on the new channel.
If you select “Next” on a programme line and press OK, you will
set a “Reminder” . This means, during watching TV, you will
be reminded when the “Reminder marked” programme starts.
If you press the “i” button once more, you will get extended in-
formation (if transmitted) for the current or next programme.
To exit the menu, press the TV or “i” button.
TV Guide
By pressing the GUIDE button you obtain access to the TV Guide
which will give the titles of the present programme on the differ-
ent channels. By pressing the Left or Right button you also can
obtain information for the next programme.
Use the Up/Down buttons to move the cursor to different pro-
gramme areas.
You can obtain extended information for a programme by press-
ing the “i” button.
If you select “Next” on a programme line and press OK, you will
set a “Reminder”. This means that, while watching TV, you will
be reminded when the “Reminder marked” programme starts.
Please note, that these features will only work if they are included
in the transmission from the Service Provider.
GB 12
Download from Www.Somanuals.com. All Manuals Search And Download.
The Radio button
Pressing the
button once gives you a menu where you can
change the spoken language in the present TV programme.
(Only if more than one language is transmitted).
Pressing the button twice will lead to the specific Audio Chan-
nel mode. The display on your Mediamaster and on the TV
screen will show the name of the audio channel you are listen-
ing to.
While in audio mode, you can press the “i” button to get ex-
tended information (if transmitted) about the audio programme.
Return to TV mode by pressing the TV button or
again.
Volume level
Increase or decrease the sound level by pressing the “+” and “-”
buttons.
A control bar will be displayed on the screen during level adjust-
ment. (The max. level for volume is the current volume setting
on the TV set).
Please note, that the volume adjustments also change the vol-
ume level to your VCR during recording.
It is possible to turn the sound on and off with the
button.
Sound off is indicated with the same symbol on the screen.
If you turn the volume off with this button, it does not affect the
volume to the VCR during recording.
GB 13
Download from Www.Somanuals.com. All Manuals Search And Download.
List of TV channels and Radio channels
During viewing TV or listening to Radio channels, you get a pro-
gramme list onto the screen by pressing the OK button.
If you have made yourself a favourite list of frequently visited
channels you can alter between “All channels” and “Favourites”
with the Left/Right buttons. (How to make a Favourite list will
be described further on in this Manual).
You can change to another channel by stepping with the UP/
DOWN buttons and then press the OK button.
To move faster (10 channels at a time) between channels you can
also use the double arrow buttons.
Video recorder
With a Video Cassette Recorder (VCR) connected you can watch/
record video tapes*.
If your VCR is connected with a SCART cable and you press the
Start button on the VCR, the playback will start and interrupt the
TV programme from the Mediamaster.
To watch TV programmes again , press the TV button on the re-
mote control for the Mediamaster, or stop the VCR.
Please note, that during the recording of a programme, every-
thing shown on the screen will be registered! For example: If you
call up a Menu from the Mediamaster on the screen, the menu
will be recorded!
* Record/playback is possible if the Video Recorder is connected
to the VCR SCART on the Mediamaster. Only playback is pos-
sible if you connect the Video Recorder to the AUX SCART.
GB 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Analogue Receiver
If you have an Analogue Receiver connected and turn it ON, the
programmes from that receiver will be shown. With the TV but-
ton on the Mediamaster’s remote control you can toggle between
channels from the analogue receiver and terrestrial TV channels.
The display on the Mediamaster indicates TV during the watch-
ing of terrestrial channels, and SAT during watching of channels
from the analogue receiver.
When the analogue receiver is turned OFF, you can toggle be-
tween channels from the Mediamaster and terrestrial channels.
In this case the display on the Mediamaster indicates “TV” dur-
ing watching terrestrial channels, and the channel name during
watching programmes from the Mediamaster.
Subtitling and Teletext. The TEXT button
Pressing the TEXT button once while watching TV will put a
menu on the screen where it is possible to change a subtitled lan-
guage. This is only possible if more than one subtitling language
is transmitted.
Exit the menu by pressing the TV button.
Pressing the TEXT button twice will give the teletext menu,
(if teletext is transmitted). Select pages with the number buttons
on the remote control.
You can also quickly step to the different subpage alternatives
shown in any page by pressing the LEFT/RIGHT buttons. Press
OK on a selected number, and the page will show up.
GB 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings from the Main Menu
How to show the Main Menu
Press the MENU button and you will get the Main Menu on the
TV screen. Press the TV button to leave the menu.
Submenus from the Main Menu
If you select one of the highlighted titles and press the OK but-
ton, a submenu will be shown on the TV screen.
From a submenu you can adjust settings to your own require-
ments.
The TV Guide and Radio Guide
These guides will give you an overview of programme informa-
tion from the TV/Radio channels. Step to different channel num-
bers with the UP/DOWN buttons.
If you stop on a line and press OK, you will exit the menu and
enter the channel marked on the line.
Select information about the next programme with the RIGHT
button.
Use the “i” button to get extended information about a marked
programme.
(Please note, that information will only be shown if it is included
in the transmission).
TV Channels and Radio channels
TV/Radio Channels will show a list with the names of the differ-
ent channels.
If you have made yourself a favourite list of frequently visited
channels you can alter between “All channels” and “Favourites”
with the Left/Right buttons. (How to make a Favourite list will
be described further on in this Manual).
To move faster within the list, use the DOUBLE ARROW buttons.
Press OK to enter a marked channel.
GB 16
Download from Www.Somanuals.com. All Manuals Search And Download.
CD
From the CD menu you can control an external CD player con-
nected to the SCSI socket.
To use present and future CD-ROM applications, the player must
have the following features:
a) SCSI-2 connection
b) support one of the following standards: CD-XA / CD-ROM /
Video-CD / Photo CD
Parental Control
By pressing OK on the line “Parental Control” you will be re-
quested to enter your PIN code. (Personal Identification Code).
This code is set to 1234 by the factory. You will now get the menu
from where you can lock some functions in the Mediamaster.
Lock Receiver: If you select “Yes” you will have to enter your
PIN code to get access to channels from the Mediamaster.
Lock Installation Menu: Select “Yes” if you want to lock access
to the Installation Menu.
Lock Channel: First, to go to the channel you want to lock, than
enter this “Parental Control” menu and select “Yes” from this
line.
Everytime someone tries to enter locked functions, the message
“Please enter your PIN code” will appear on the TV screen.
Change PIN code: If you change the PIN code from the stand-
ard 1234, DO NOT FORGET IT! Without the code you do not
have access to the functions you have set from this menu!
Installation
The Installation Menu lets you add or change settings already
made. More about this Menu follows in the chapter “Installation
Submenus” starting on the next page.
Common Interface
(This line wil be highlighted only when a CA Module is mounted).
From here you will get access to information and menus con-
nected to the CA Module.
This information may vary a lot depending on the Service Provider.
Please see the documentation delivered together with your CA
Module.
GB 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Submenus
Installation
Select this Menu from the line “Installation” in the Main Menu.
The submenu will give you the opportunity to change the prefer-
ences performed during first time installation. You can also add
features that were not included from the first time installation.
Please note that helpful information for every line is given at the
end of the menu.
Cable Network settings
From here you can add more channels (if available) from the Ca-
ble Net by entering the necessary settings.
You use the number buttons on the remote control to enter the
frequence with 5 digits, and the Symbol Rate with 4 digits.
The “.” (point) will be automatically set.
Select Modulation with the Left/Right buttons.
The information you have to enter here you can get from the ca-
ble network contractor or from your landlord.
Frequency: Enter the specified frequence.
Symbol Rate: Enter the Symbol Rate.
Modulation: Select Modulation.
When this is done, press the OK button to proceed with the Chan-
nel Search procedure.
Channel Search
From here you can now and then make an extra search through
the whole Cable Net in order to find new added channels.
Edit Channels
From “Edit TV channels” and “Edit Radio channels” you can
change the order of the TV and Radio channels to your needs by
simply selecting and moving a channel to a new position.
You may also delete unwanted channels. Follow the instructions
in the menu.
GB 18
Download from Www.Somanuals.com. All Manuals Search And Download.
Create a Favourite List
When you enter the line “Edit favourite list” in the Edit Channels
menu you will get a submenu from where you can create a “fa-
vourite list” containing e. g. the channels you most frequently
watch.
With the OK button, X-mark the channels you want to be included
in the list.
It is possible to make one list for TV channels and another one
for Radio channels. Select list with the Left/Right buttons.
(If you press the OK button during viewing TV or listening to ra-
dio channels, you will get the Channel list, where you now can
alter between “All Channels” and “Favourite Channels”. Ref. to
page GB 14).
Language Settings
From here you can change the language for the menus, audio
language and subtitle language. Just follow the instructions given
at the bottom of the menu.
System Settings
Time Adjustment: Adjust the clock in steps of ± 1/2 hour.
Fullscreen/Letterbox: These alternatives may be used on a
normal 4:3 TV set. Fullscreen will fill up the whole TV screen but
lose some information in the edges.
Letterbox will give a larger picture.
Timeout Channel Info: Used to set the time in seconds for how
long the channel info on the TV screen will be shown.
Timeout Number Keys: The delay time within which you have
to press the next button.
Type of connected TV:
4/3 is for TV sets with normal screen
16/9 is for wide screen TV sets
Display Volume Indicator: Possibility to turn on/off the Volume
Indicator on screen.
GB 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiver upgrade
If your Service Provider has a new software version available for
the Mediamaster, you can enter this menu and obtain informa-
tion.
If no software is available, you will get the message “No new
software available”.
During downloading periods you are prevented from changing
any settings. The display will show “UPGRADE” during a
download procedure.
IMPORTANT! The update procedure may take up to one hour!
DO NOT turn off the Mediamaster or disconnect the cable to
the antenna input during this procedure!!
First time Installation
Will start the Installation procedure from the “Welcome Menu”.
When you enter the “Welcome Menu” again and press the
OK button, you should be aware of the fact that all previous
channels and settings will be erased! Press the EXIT button
to leave the menu without making any changes.
Symbols on the Mediamaster display
No TS No Transport Stream
? No function.
= No signal.
Channel name.
Err Error message.
UPGRADE
The Mediamaster is busy
downloading new software.
Signal indicator.
A square means full signal.
GB 20
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary of terms
Access Authorisation to use the coding system to
MPEG Moving Picture Experts Group
purshase/order TV programmes.
PIN code
Personal Identification Number.
Audio system With digital satellite reception, the
sound is transmitted in packages and is selected either
in a special audio mode or pre-selected by using instal-
lation set-up. This gives the opportunity to select be-
tween several different languages to a movie. Amount
of choices is dependent on what is available in the sig-
nal.
A four-digit code that is used for locking/unlocking, eg
with the parental control feature. Default value is nor-
mally 1234.
PSI
Programme Specific Information
Parental control A feature that allows parents to "lock"
programmes that they consider unsuitable for children.
A "locked" programme can only be "unlocked" with the
special secret code (PIN code).
Coded satellite TV programme
Some satellite TV programmes are transmitted in en-
coded form; with black screen and no sound. A Smart
Card is needed to view such programmes.
RF
Radio frequency (known as HF in some coun-
tries).
DTH Direct to Home
RS 232 Serial data port
DVC Digital Video Cassette
DVB Digital video broadcast
SCART A connector used for connection of e.g.
Mediamasters, video recorders and TV sets. Also
named Euroconnector or Peritel connector.
EPG
Electronic Programming Guide, programme in-
SI
Service Information
formation about name, starttime etc.
Symbol rate Size of the digital package transmission
GHz Abbreviation for GigaHertz. The prefix giga
means billion, and Hertz means cycles per second. Sig-
nals in the GHz range are often called microwaves.
SW
TS
Soft ware
Transport stream
MHz Abbreviation for MegaHertz. The prefix mega
means million, and Hertz means cycles per second.
VCR Abbreviation for Video Cassette Recorder.
GB 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications
Transmission Standards
Front panel
Display 8 character alphanumeric matrix,
5x7 pixels. Buttons: (standby,
progr. number up and down)
DVB, MPEG 2
,
RF input / Loop through output
Input connector
RF impedance
RF frequency
RF input power level 55 - 80 dB uV
RF impedance
IEC female
75 Ω
General data
Article code
The model code, variant and serial number,
are located on a label on the underside of
the housing.
Software version (V.x.xxx) and Boot version
(Bx.xx or Boot x.xx) are displayed in the
matrix display when the Mediamaster is
powered up.
47 - 862 MHz
75 Ω
IEC male
Software
Output connector
TV SCART
Video output
Audio output
RGB output
1 Vpp (±1 dB) / 75 Ω
0,5 Vrms / RL >10 kΩ
Internal RGB or from
SATELLITE SCART
6 MHz ±3 dB
Supply voltage
230 V AC ±15%, 50-60 Hz
40 W
Power consumption max
Power consumption in
standby
Working temperature
Storage temperature
Operating distance for
remote control
RGB bandwidth
Fast blanking output Internal RGB or from
SATELLITE SCART
2 W
+5° C to +40°
- 40° C to +65° C
Status output
0/6/12 V / RL 10 kΩ
max 10 meters
380 x 240 x 65 mm
2,2 kg approx
VCR SCART
Video output
Video input
Audio output
Audio input
Status input
Dimensions (w x d x h)
Weight
1 Vpp (±1 dB) / 75 Ω
1 V pp / 75 Ω
0,5 Vrms / RL >10 kΩ
0,5 Vrms / RL >10 kΩ
0/6/12 V / RL >10 kΩ
SCART-sockets
TV
AUX
VCR
AUX SCART
Video input
RGB input
Fast blanking input
Audio input
Status input
1
2
3
4
5
6
7
8
9
Audio out right ch.
-
Audio out left ch.
Audio ground
RGB blue ground
-
Audio out right ch.
1 Vpp / 75 Ω
Yes
Yes
0,5 Vrms / RL >10 kΩ
0/6/12 V / RL >10 kΩ
Audio in right ch.
-
Audio in right ch.
Audio out left ch.
Audio ground
RGB blue ground
Audio in left ch.
Audio ground
-
Audio in left ch.
-
AUDIO R L
Connector
Output
RGB blue signal out RGB blue signal in
Switch voltage out Switch voltage in
RGB green ground RGB green ground
-
2 x RCA (R+L)
0,5 Vrms / RL 10 kΩ
Switch voltage in
-
-
10 -
-
Low speed serial data (RS 232)
Connector
Signals
11 RGB green signal out RGB green signal in -
12 -
9-pin D-sub
RS232, max. 19.2 kbit/s
-
-
13 RGB red ground
14 Fast blank. ground
15 RGB red signal out
16 Fast blanking out
17 Video out ground
RGB red ground
Fast blank. ground
RGB red signal in
Fast blanking in
-
-
-
-
-
Pin
1 not connected 2 RXD
3 TXD
5 GND
7 RTS
4 Set to high
6 not connected
8 CTS
Video out ground
Video in ground
Video out
9 not connected
18
-
Video in ground
-
SCSI
Connector
Signal
19 Video out
20 -
21 Ground (casing)
50 pol.
SCSI-2 (max. 3,8 MB/s)
Video in
Video in
Ground (casing)
Ground (casing)
20
21
2
1
The EMC Directive 89/336/EEC is applied to this product.
GB 22
Download from Www.Somanuals.com. All Manuals Search And Download.
Mediamaster 9600 C
Nokia is a registered trademark of Nokia Corporation
66 76939-10
© 98 26
Download from Www.Somanuals.com. All Manuals Search And Download.
|