User Guide
MESSAGING PHONE with Xpress- on™ snaps
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in China
Nokia 2605 User Guide
9205283
Issue 2 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright © 2008 Nokia. All rights reserved.
Nokia, Navi and Nokia Connecting People are trademarks or registered
trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia
Corporation. Other product and company names mentioned herein may
be trademarks or tradenames of their respective owners.
Reproduction, transfer, distribution, or storage of part or all of the contents in this
document in any form without the prior written permission of Nokia is prohibited.
cdma2000 is a registered certification mark of the Telecommunications
Industry Association.
Includes RSA BSAFE cryptographic or security protocol software from
RSA Security.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Nokia operates a policy of ongoing development. Nokia reserves the right to
make changes and improvements to any of the products described in this
document without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO
CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR
ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL
OR INDIRECT DAMAGES HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED
BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE
ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES
THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT
PRIOR NOTICE.
The availability of particular products and applications and services for these
products may vary by region. Please check with your Nokia dealer for details, and
availability of language options.
Download from Www.Somanuals.com. All Manuals Search And Download.
Export controls
This device may contain commodities, technology, or software subject to export
laws and regulations from the US and other countries. Diversion contrary to law
is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone
in close proximity to receiving equipment). The FCC or Industry Canada can require
you to stop using your telephone if such interference cannot be eliminated. If you
require assistance, contact your local service facility. This device complies with
part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired
operation. Any changes or modifications not expressly approved by Nokia could
void the user’s authority to operate this equipment.
The third-party applications provided with your device may have been created
and may be owned by persons or entities not affiliated with or related to Nokia.
Nokia does not own the copyrights or intellectual property rights to the third-
party applications. As such, Nokia does not take any responsibility for end-user
support, functionality of the applications, or the information in the applications or
these materials. Nokia does not provide any warranty for the third-party applications.
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS
ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER
ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY
REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, OR THAT THE APPLICATIONS WILL NOT INFRINGE ANY
THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.
9205283/Issue 2
Download from Www.Somanuals.com. All Manuals Search And Download.
C o n t e n t s
Contents
Pictures.......................................... 30
Mobile Web.................................. 32
Welcome............................... 9
Getting Help................................... 9
Get The Most Out Of
This Guide...................................... 10
Info ................................................. 32
1. Phone at A Glance....... 11
Standby Mode.............................. 13
Incoming Calls............................. 32
Indicators and Icons................... 13
Security and Functionality....... 33
Phone Menus................................ 14
Navigate Menus .......................... 15
Directional Key ............................ 15
Text Messages ............................. 34
2. Set Up Your Phone ...... 17
Antenna ......................................... 17
Change the Battery .................... 17
Charge the Battery..................... 19
Wrist Strap.................................... 19
Replace the Camera
Picture Messages........................ 34
New Message .............................. 35
Inbox .............................................. 38
Sent Messages............................. 40
Draft Messages ........................... 41
Message Settings ....................... 41
Voicemail Messages................... 42
Mobile Instant Messaging ....... 43
E-mail Messages......................... 43
Chat................................................ 43
Xpress-onTM snap........................ 19
Replace the Back Camera
Xpress-onTM snap........................ 21
Turn Your Phone On or Off....... 22
Connect the Headset ................. 22
Make A Call .................................. 23
Answer Calls................................. 24
6. Contacts........................ 44
Create New Contacts ................ 44
Contact List.................................. 46
Groups ........................................... 48
1-touch Dials............................... 49
In Case of Emergency (ICE)...... 51
3. Text Entry..................... 27
Word Mode................................... 27
Abc (Multi-tap) Mode................ 28
123 (number) Mode ................... 28
Symbols Mode.............................. 28
7. E-mail Messages........... 53
4
Download from Www.Somanuals.com. All Manuals Search And Download.
C o n t e n t s
Phone Information..................... 76
Setup Assistant........................... 77
8. Mobile Instant
Messaging .................... 54
13. Voice commands .......... 78
Activate and use
Voice Commands........................ 78
9. My Ringtones............... 55
10. Recent Calls.................. 56
View Calls...................................... 56
View Call Timers.......................... 56
14. Enhancements .............. 80
15. Battery and Charger
11. VZ Navigator................ 58
Information................... 81
Battery Information................... 81
Nokia Battery Authentication
Guidelines..................................... 82
12. Settings & Tools .......... 59
My Verizon.................................... 59
Tools ............................................... 59
Bluetooth Menu.......................... 64
Sounds Settings........................... 66
Display Settings........................... 67
Phone Settings............................. 69
Call Settings................................. 74
Memory ......................................... 76
Care and Maintenance....... 84
Additional Safety
Information......................... 86
Index.................................... 94
5
Download from Www.Somanuals.com. All Manuals Search And Download.
S A F E T Y
SAFETY
Read these simple guidelines. Not following them may be dangerous
or illegal. Read the complete user guide for further information.
SWITCH ON SAFELY
Do not switch the device on when wireless phone use is
prohibited or when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to
operate the vehicle while driving. Your first consideration
while driving should be road safety.
INTERFERENCE
All wireless devices may be susceptible to interference,
which could affect performance.
SWITCH OFF IN RESTRICTED AREAS
Follow any restrictions. Switch the device off in
aircraft, near medical equipment, fuel, chemicals,
or blasting areas.
QUALIFIED SERVICE
Only qualified personnel may install or repair this
product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not
connect incompatible products.
WATER-RESISTANCE
Your device is not water-resistant. Keep it dry.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
S A F E T Y
■ About Your Device
The wireless device (RM-339) described in this guide is approved
for use on the following Verizon Wireless networks: CDMA 800 and
1900 MHz, and CDMA2000 1xRTT. Contact Verizon Wireless for
more information about networks.
When using the features in this device, obey all laws and respect local
customs, privacy and legitimate rights of others, including copyrights.
Copyright protection may prevent some images, music, and other
content from being copied, modified, or transferred.
Your device may have preinstalled bookmarks and links for third-
party internet sites. You may also access other third-party sites
through your device. Third-party sites are not affiliated with Nokia,
and Nokia does not endorse or assume liability for them. If you
choose to access such sites, you should take precautions for
security or content.
Warning: To use any features in this device, the device
must be turned on. Do not turn the device on when
wireless device use may cause interference or danger.
Remember to make back-up copies or keep a written record of all
important information stored in your device.
When connecting to any other device, read its user guide for detailed
safety instructions. Do not connect incompatible products.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
S A F E T Y
■ Network Services
To use the device you must have service from a wireless service
provider. Many of the features require special network features.
These are not available on all networks; other networks may
require that you make specific arrangements with your service
provider before you can use the network services. Your service
provider can give you instructions and explain what charges will
apply. Some networks may have limitations that affect how you
can use network services. For instance, some networks may not
support all language-dependent characters and services.
Your service provider may have requested that certain features be
disabled or not activated in your device. If so, these features will
not appear on your device menu. Your device may also have a
special configuration such as changes in menu names, menu order,
and icons. For more information, contact your service provider.
This device supports WAP 2.0 protocols (HTTP and SSL) that run
on TCP/IP protocols. Some features of this device, such as
Media Center and e-mail messaging, require network support
for these technologies.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
W e l c o m e
Welcome
Congratulations on your purchase of this Nokia mobile device.
Your device provides many practical functions for daily use, such
camera and image and data downloads. Your device can also
connect to other devices using Bluetooth wireless technology.
To personalize your phone, you can set your favorite ringtones.
■ Getting Help
If you need help, the Nokia Care Contact Center is available for
assistance. Before calling, we recommend that you write down the
Mobile Equipment Identifier (MEID) and your zip code (only in the
US), and have it available.
Find your device label
The MEID is found on
the type label, which is
located beneath the
battery on the back
of the phone. See
"Remove the back
cover," p. 17.
Accessibility solutions
Nokia is committed to making mobile devices easy to use for all
individuals, including those with disabilities. For more information,
9
Download from Www.Somanuals.com. All Manuals Search And Download.
W e l c o m e
Nokia support and contact information
Check www.nokiausa.com/support or your local Nokia website for
the latest guides, additional information, downloads, and services
related to your Nokia product.
On the website, you can get information on the use of Nokia
products and services. If you need to contact customer service,
check the list of local Nokia Care Contact Centers at
For maintenance services, check your nearest Nokia Care Contact
Center location at www.nokia.com/repair.
Billing and customer service
To reach Verizon Wireless’ billing and customer service support,
dial 1-800-256-4646.
■ Get The Most Out Of This Guide
The following sections illustrate the various components of
your device. Familiarize yourself with these sections to help
you understand the instructions that follow.
This guide uses certain terms for the steps that you are asked
to perform.
• Press means to press and release a key quickly. For example,
press 7 means press and release the key on the keypad that is
labeled with the number 7.
• Press and hold means to press and hold a key for 2–3 seconds,
then release the key.
•
Scroll means pressing one end of the Directional key briefly once.
For example, scroll left means pressing the left end of the key.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
P h o n e a t
A
G l a n c e
1. Phone at A Glance
1. Earpiece
2. Display screen
3. Directional key
4. Right Soft key
5. Camera key
6. End/Power key
7. Alphanumeric keypad
8. Vibration key
9. Next key
10. International Dialing key
11. Voicemail 1-touch
dial key
12. Clear key
13. Send key
14. Speakerphone key
15. Left Soft key
16. OK key
11
Download from Www.Somanuals.com. All Manuals Search And Download.
P h o n e a t
A
G l a n c e
1. Charging/
Data port
2. Volume keys
3. Headset jack
4. Camera
Xpress-onTM
snap
5. Camera lens
6. Front display
7. Back cover
Xpress-onTM
snap
8. Microphone
9. Wrist Strap
eyelet
10. Voice
Command key
11. Speakerphone
12
Download from Www.Somanuals.com. All Manuals Search And Download.
P h o n e a t
A
G l a n c e
■ Standby Mode
The start screen is home base and indicates that your phone is in
Standby Mode.
1. Signal strength — The
strength of the signal
received by the phone is
indicated by the number
of bars displayed.
2. Message — Press the Left
Soft key to select this option.
3. MENU — Press the OK key
to select this option.
4. Contacts — Press the Right
Soft key to select this option.
5. Battery strength — Four bars indicate a fully charged battery.
6. Location — Location information sharing mode.
■ Indicators and Icons
Depending on your phone settings and modes, some or all of
the following indicators and icons may appear in Standby Mode.
To view how to access the complete glossary, see "Phone
Information," p. 76.
Signal strength indicator. You are in a digital network.
Signal strength indicator. You are in a 1xRTT network.
Airplane mode is on. See "Airplane Mode," p. 69.
You are roaming outside your home network.
SSL security feature is on.
Voice privacy is activated.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
P h o n e a t
A
G l a n c e
Data session: a wireless data communication is
in progress.
Dormant mode: the phone is in a dormant state during
a data call. Your connection is still active.
No service indicator.
TTY is enabled.
Voice call: a call is in progress. No icon indicates that
the phone is in Standby Mode.
Location information sharing is set to E911 Only.
See "Location Setting," p. 72.
Location information sharing is set to Location On.
See "Location Setting," p. 72.
Bluetooth wireless connectivity is on.
Battery level indicator.
All sounds off.
Alarm only is on.
Vibrate mode is on.
Speakerphone is on.
You have missed calls.
You have new messages in your inbox.
Calendar appointment is set.
You have new voicemails.
Alarm clock is activated.
■ Phone Menus
In the default list view mode, phone features are grouped into nine
main menus (Media Center, Messaging, Contacts, Email, Mobile
IM, My Ringtones, Recent Calls, VZ Navigator, and Settings & Tools).
14
Download from Www.Somanuals.com. All Manuals Search And Download.
P h o n e a t
A
G l a n c e
Each main menu contains submenus and lists from which you
can select or view items and customize your phone features.
Some features may not be available, depending on your network.
For more information, contact Verizon Wireless.
You can also change the layout of the Main Menu from Standby Mode
by selectingMENU> Settings & Tools > Display Settings > Main Menu
Settings > Tab, List, or Grid. See "Main Menu Settings," p. 69.
Note: In this guide, all the operations are instructed in the
"Default List" view mode unless specially indicated.
■ Navigate Menus
1. In Standby Mode, use the Left and Right Soft keys to select
Message or Contacts. To access the main menus, select MENU
with the OK key, then scroll up or down (or scroll left or right in
the "Tab" mode).
To provide a visual representation of your current position in
the menu structure, a scroll bar may be displayed on the right
side of the screen.
2. Press the Clear key
to return to the previous screen.
3. Press the End key
menu or submenu.
to return to the Standby Mode from any
4. Press the OK key to select highlighted menus and submenus.
■ Directional Key
You can use the Directional key to move up,
down, left, and right through the menu options.
Depending on how you configure your phone,
some or all of the following menu shortcuts
may be available in Standby Mode using the
Directional key. See "Set Directional Keys," p. 70.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
P h o n e a t
A
G l a n c e
The default menu setting for the Directional key is as follows:
Press the Directional key Right — MY SHORTCUTS.
Press the Directional key Up — Mobile Web.
Press the Directional key Left — My Verizon.
Press the Directional key Down — Calendar.
My shortcuts
My shortcuts provides quick access to other shortcuts. To access
MY SHORTCUTS, press the Directional key Right.
The default menu setting for MY SHORTCUTS is as follows:
1. New TXT Msg
2. New Picture Msg
3. Calculator
4. Alarm Clock
To change the order of the MY SHORTCUTS menu, in Standby Mode,
press the Directional key Right and scroll to the shortcut you want
to move, and select Move. Scroll to the place where you want to
move the shortcut, and select SAVE.
To change the default shortcuts, select Settings. For more
information, see "Set Shortcuts," p. 70.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t U p Y o u r P h o n e
2. Set Up Your Phone
■ Antenna
Your device may have
internal and external
antennas. As with any
radio transmitting device,
avoid touching the
antenna area unnecessarily
while the antenna is
transmitting or receiving.
Contact with such an
antenna affects the
communication quality
and may cause the device
to operate at a higher power level than otherwise needed and may
reduce the battery life.
An internal GPS antenna is activated when you place an emergency
call or when you select Location On from the Location Setting
menu. See "Location Setting," p. 72.
Any GPS should not be used for precise location measurement, and
you should never rely solely on location data from the GPS receiver
and cellular radio networks for positioning or navigation.
■ Change the Battery
Remove the back cover
With the back of the phone
facing you, push down and slide
the back cover toward the
bottom of the phone and remove.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t U p Y o u r P h o n e
Note: Always turn off the device, and disconnect the
charger and any other device, before removing the cover.
Avoid touching electronic components while changing
the cover. Always store and use the device with the
cover attached.
Remove the battery
After you have removed the
back cover, insert your finger
into the finger grip, and lift the
battery from its compartment.
Replace the battery
Insert the battery, making
sure to align the contacts,
and press down until the
battery fits into place.
Replace the back cover
Replace the cover by aligning
the cover tabs with the slots
in the side of the phone. Slide
the cover toward the top,
securing it with a click.
Important: Do not remove the front cover of this device.
Attempts to remove the front cover may damage the
phone. If your phone requires service, contact the Nokia
Care Contact Center.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t U p Y o u r P h o n e
■ Charge the Battery
1. Plug the AC-6U charger
transformer into a standard
AC outlet.
2. Open the charger cover on the
left side of the phone.
3. Insert the charger
output plug into the
slot. The battery
strength indicator
scrolls, to show the
battery is charging.
The charge time
varies depending on
the battery level.
Note: The CA-101 data cable is used for data transfer and
slow charging the battery while connected to a PC or
laptop. Charging with the AC-6U charger is recommended
when quick charging is needed. The CA-101 data cable is
purchased separately.
■ Wrist Strap
Note: The wrist strap does NOT
come in the box.
Thread a wrist strap as illustrated, and
tighten it.
TM
■ Replace the Camera Xpress-on snap
You can remove and replace the camera Xpress-onTM snap on the
front cover of the phone.
Note:Avoid touching the camera lens and keep the lens clean.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t U p Y o u r P h o n e
1. Place the phone with the
front of the phone facing
you. Place your thumb in the
gap between the camera
Xpress-onTM snap and the
phone and push down.
2. Push the camera Xpress-onTM
snap toward the top of
the phone.
3. Slide the camera Xpress-onTM
snap out and lift it away
from the phone.
4. Place the two rear camera
tabs into holes as illustrated.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t U p Y o u r P h o n e
5. Push the camera Xpress-onTM
snap toward the bottom of the
phone until it is in place.
■ Replace the Back
TM
Camera Xpress-on snap
You can remove and replace the back Xpress-onTM snap on the
back of the phone. You must remove the back cover of the phone
and the battery before removing the back Xpress-onTM snap.
1. Place the phone with the
back of the phone facing
you. Push and slide the back
Xpress-onTM snap toward
the bottom of the phone,
and lift it from its
compartment to remove.
2. To replace the back
Xpress-onTM snap, align it
with the slot in the phone.
3. Slide the back Xpress-onTM
snap toward the top of the
phone until it is in place.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t U p Y o u r P h o n e
■ Turn Your Phone On or Off
To turn your phone On or Off, press
and hold the End/Power key for at
least 3 seconds. The first time the
device is turned on, Setup Assistant
prompts you to customize your
device, see "Setup Assistant," p. 77.
■ Connect the Headset
Note: A headset does NOT come in box.
For hands-free operation, connect a compatible headset with a
standard 2.5-mm plug to your phone.
Warning: When you use the headset, your ability to hear
outside sounds may be affected. Do not use the headset
where it can endanger your safety.
1. Plug the headset
connector into the
2.5-mm headset jack
on the side of your phone.
2. Position the headset on
your ear.
With the headset
connected, you can
make, answer, and
end calls as usual.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t U p Y o u r P h o n e
■ Make A Call
To make a call (network service), make sure the phone is powered
on. Enter the phone number (including the area code if necessary),
and press the Send key
cursor, press the Clear key
. To delete a character to the left of the
. Press the End key to end the
call. To use the contacts menu and to enter contact numbers, see
"Contacts," p. 44.
Recently dialed numbers
To display the numbers for calls you have recently made, received, or
missed, press the Send key
. To redial the most recent number,
press the Send key again. To call another number from the
list, highlight the number (or name) and press the Send key
.
Speakerphone
To use the Speakerphone during a call, press the Speakerphone key
. To turn the Speakerphone off, press the Speakerphone key
again.
Warning: Do not hold the device near your ear when the
Speakerphone is in use, because the volume may be
extremely loud.
Call a 1-touch dial number
Note: To use one touch dialing, you must first turn on the
One Touch Dial feature, see "One Touch Dial," p. 75.
To dial a single-digit 1-touch dial number (1–9), press and hold the
number of the assigned key. To dial a multi-digit 1-touch dial
number (10-999), press the first number(s), and press and hold the
last number. See "1-touch Dials," p. 49.
You can also press the assigned 1-touch dial number(s) and the
Send key
.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t U p Y o u r P h o n e
■ Answer Calls
The following options are available to manage incoming calls
(network service).
Answer or silence an incoming call
There are three ways to answer an incoming call depending on the
phone settings. For more information, see "Answer Options," p. 74.
•
•
•
Open the flip (default setting).
Press any key.
The call automatically connects when your phone is connected
to a handsfree device.
Utilizing the Soft keys, to silence an incoming call, select Quiet.
To forward the call to your voicemail, select Ignore. To end a call,
press the End key
.
Headset calls
To answer a call when a headset is connected, press the Send key
on your device or on the headset. To adjust the call volume,
use the Volume keys on your headset if available.
Adjust the earpiece volume
To adjust the volume during a call and with the flip open, press
the Volume keys Up or Down. When you adjust the volume, bars
indicate volume level. The more bars, the higher the volume.
Caller ID
To display both the name and number of the person calling you, the
caller’s identity must be stored in Contacts. If the caller is not setup in
your Contacts, only the phone number is displayed, or the incoming
caller number may be shown as Restricted or Unavailable. See "Create
New Contacts," p. 44.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t U p Y o u r P h o n e
Picture ID
You can assign a picture to a contact that is displayed when the
contact calls you, or when you call the contact. See "Assign Picture
ID," p. 46.
Silent Mode
Open the flip, and press the Volume keys Down until All Sounds Off
is displayed. To turn sounds on, press the Volume keys Up until the
desired level is reached.
Vibrate Mode
To use Vibrate Mode with a ringtone, from Standby Mode, select
MENU > Settings & Tools > Sounds Settings > Call Sounds > Call
Vibrate > On > OK.
To set Vibrate Mode on and and silence all other sounds, open
the flip and press the Volume keys Down until Vibrate Only is
displayed. Or press and hold the Vibration key
(see "Phone at
A Glance," p. 11).
Other options during a call
Select Options for one of the following when you are on a call:
Messaging — Send or retrieve messages.
Contact List — Search your Contact List.
Recent Calls — Check recent calls.
Bluetooth Menu — Utilizing a Bluetooth headset.
The following options are available if a Bluetooth headset
is connected. Select Audio to Phone to hear the other party
on the phone, or Audio to Device to hear the other party on
the Bluetooth headset.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t U p Y o u r P h o n e
Main Menu — Use Main Menu.
Voice Privacy On — Select whether to protect the privacy of
the conversation.
Notepad — Open the notepad.
Voice Record — Record a phone call.
Mute Function
To prevent the other person from hearing your own voice during a
call, utilize the Left Soft key to select Mute. To deactivate this
feature, select Unmute.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
T e x t E n t r y
3. Text Entry
Your phone offers five methods for entering text, numbers,
and symbols: Word, Abc, ABC ,123, and Symbols. The following
rules apply:
•
Press the Clear key
to backspace the cursor and delete
a character.
•
•
Press and hold the Clear key to delete an entire word.
Press #
Word Mode.
to enter a space, or to accept a completed word in
to change the character case in Word, Abc, or
•
•
Press *
ABC Mode.
Press the Left Soft key to change the mode.
■ Word Mode
Word Mode is a predictive method of text entry. It uses a built-in
dictionary to quickly recognize the most commonly used word for
a specific key sequence. You only need to press the corresponding
key on your Alphanumeric keypad once for each letter.
Activate Word Mode
To activate the Word Mode, press the Left Soft key, and select Word.
Word Mode Text Entry
The illustration below simulates your display each time a key is
pressed in word mode. For example, to write "Verizon" with Word
Mode on and the English dictionary selected, press each of the
following keys once:
27
Download from Www.Somanuals.com. All Manuals Search And Download.
T e x t E n t r y
•
If a displayed word is not correct, press 0 to view other
word options.
•
If your word does not appear, delete your entry, and press the
Left Soft key to change the mode to Abc. Re-enter your word
using the Multi-tap Mode.
•
When you have finished the word and it is correct, press #
to confirm and insert a space.
■ Abc (Multi-tap) Mode
In the Abc (or Multi-tap) Mode, to enter a letter, repeatedly press a
key until the desired letter appears.
Activate Abc Mode
To activate Abc Mode, press the Left Soft key, and select Abc, or ABC.
Abc Mode Text Entry
Press a key once to insert the first letter on the key, twice for the
second letter, and so on. If you pause briefly, the last letter in the
display is accepted, and your phone awaits the next entry.
■ 123 (number) Mode
To enter a number in Abc, ABC, or Word Mode, press and hold the
desired number key. To switch to 123 mode, press the Left Soft key,
and select 123.
■ Symbols Mode
To insert special characters into your message, press the Left Soft
key, and select Symbols. If the symbol you are looking for is not
displayed, press the Directional key either Left or Right to display
more symbols. In Abc or ABC Mode, press 1
repeatedly to scroll
through some common punctuation marks and special characters.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
M e d i a C e n t e r
4. Media Center
Media Center (network service) allows you to personalize your phone
to your own lifestyle and tastes. You can download ringtones, music,
sounds, pictures, games, news, information, tools, and extras. You can
also find information such as the location of restaurants or ATMs.
Download charges for Media Center applications vary and airtime
charges apply when browsing, downloading, and using certain
Wireless network, as long as your phone has a digital signal available.
Note: This feature shares memory space with other features.
■ Tunes & Tones
You can personalize your phone with sounds and ringtones using
Tunes & Tones (network service). A large variety of music styles are
available, such as current hits, pop, and hip-hop.
In Standby Mode select MENU > Media Center > Tunes & Tones
and choose from the following options:
Get New Ringtones > Get New Applications to download new
ringtone applications, or use one of the applications to download
ringtones from the internet. You can set a downloaded ringtone as
a ringtone, a contact ID for a contact, or as an alert sound for
calendar entries. New ringtones are stored in the My Ringtones
folder. Subscription and purchase pricing are available.
My Ringtones — To set your favorite music as a ringtone, see "My
Ringtones," p. 55.
My Sounds — Select Record New to record sounds such as music, or
spoken words. You can play the recorded sounds later or send them
in a picture message. Highlight a sound and select PLAY to listen
to it, Erase to delete it (except the default sounds) or Options and
from the following:
29
Download from Www.Somanuals.com. All Manuals Search And Download.
M e d i a C e n t e r
•
•
Send — To send the highlighted sound in a picture message.
To Online Album — To upload the highlighted sound to
Online Album.
•
•
•
•
and select OK (only for self-recorded sounds) to save.
Lock — To protect a sound from being erased (only for
self-recorded sounds).
Erase All — To erase all sounds stored in the phone (only for
self-recorded sounds).
File Info — To view file information about the highlighted sound.
■ Pictures
Pictures (network service) allows you to view, take, and send
digital pictures from your phone.
You can take photos with the built-in camera.
After you take a picture, you can attach it to a picture message, or
set it as wallpaper or picture ID for a contact. When you attach a
picture to an entry in your list of contacts, the picture is displayed
when the contact calls you or when you call the contact. Pictures
can be stored in the My Pictures folder or uploaded to Online Album.
See "Picture Message," p. 36. Your phone supports image capture
resolution 160 x 120, 320 x 240, and 640 x 480 mega pixels.
If there is not enough memory to take a new photo, delete old
content in the My Pictures gallery.
Take a Picture
To utilize the built-in camera, press the Camera key
on the
keypad, or in Standby Mode select MENU > Media Center >
Pictures > Take Picture. To take a picture, press TAKE. To adjust the
picture quality, select Optionsand choose from the available options:
Resolution — Choose 640 x 480, 320 x 240, or 160 x 120, and
select SET.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
M e d i a C e n t e r
Self Timer — Choose Off, 3 seconds, 5 seconds, or 10 seconds, and
select SET.
Brightness — Press left or right on the Directional key, and select SET.
White Balance — Press left or right on the Directional key to
choose Auto, Sunny, Cloudy, Tungsten, Fluorescent, or Darkness,
and select SET.
Shutter Sound — Choose Shutter, Silent, Say "Cheez", or Ready! 1 2 3,
and select SET.
Color Effects — Press left or right on the Directional key to choose
Normal, Sepia, Black & White, Negative, Aqua, or Green, and
select SET.
Capture Mode — Choose Landscape or Portrait, and select SET.
After taking a picture, you can save it to My Pictures, send it in a
picture message, upload it to Online Album, or erase it.
Other options
Get New Pictures — Select Get New Applications to download picture
applications, or use one of the applications to download images
from the internet. Subscription and purchase pricing are available.
My Pictures — Select pictures from your My Pictures folder to send,
lock, erase, rename, or view. To use a picture, select Options >
Send, Set As, To Online Album, Take Picture, Get New Pictures,
Rename, Lock or Unlock, Erase All, or File Info.
Online Album — Access the online picture album to upload pictures.
■ Games
To open games from the games gallery or download a new game
(network service), select MENU > Media Center > Games > Get
New Applications and choose a game option. Select the game you
want and a payment option, and download the title. You can start
using the application as soon as the download is complete.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
M e d i a C e n t e r
■ Mobile Web
To connect to the internet and browse for the latest news, stock
quotes, movie listings, and more (network service), select MENU >
Media Center > Mobile Web or press up on the Directional key in
Standby Mode.
■ Browse & Download
To browse the internet for information (network service), such as
the location of a restaurant or the nearest ATM, select MENU >
Media Center > Browse & Download > Get New Applications or
VZ Navigator to download applications. Subscription and purchase
pricing are available.
■ Extras
To access the internet for additional Verizon Wireless downloads
and applications (network service), select MENU > Media Center >
Extras > Get New Applications. Subscription and purchase pricing
are available.
■ Info
To check memory status or find information on how to download
applications, select MENU > Media Center and press the Right Soft
key to view the information screen. This menu enables you to check
the App. Memory, Content Memory (phone memory), or View Log
of downloads. To find information on how to add, delete, disable,
or restore applications, determine airtime charges, or cancel
subscriptions, select Help.
■ Incoming Calls
While downloading an application, calls are automatically sent
to your voicemail, if available.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
M e d i a C e n t e r
When using an application, an incoming call automatically interrupts
the application and allows you to answer the call. When you
complete your call, you can resume using the application.
Make an emergency call while online
You can end your data connection to make an emergency call.
1. Close your connection by pressing the End key
as many
times as needed to clear the display and get the phone ready
for calls.
2. Enter 911 for emergency calls.
3. Press the Send key
.
■ Security and Functionality
Your phone supports a digital rights management system to
protect acquired content. Content such as ringtones may be
protected and associated with certain usage rules.
Usage rules are defined in the content activation key that can be
delivered with the content or delivered separately. You may be able
to update the activation key. Always check the delivery terms of
any content and activation key before acquiring them, as they may
be subject to a fee.
Mobile Web 2.0 is a digital network service that is not available
everywhere. Mobile Web text messages and alerts fees apply to
sent and received messages. Airtime charges apply. See "Network
Services," p. 8.
The security icon (
) does not indicate that the data transmission
between the gateway and the content server (or place where the
requested resource is stored) is secure. Verizon Wireless secures the
data transmission between the gateway and the content server.
Important: Use only services that you trust and that offer
adequate security and protection against harmful software.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
M e s s a g i n g
5. Messaging
If you have subscribed to a message network service, you can send
and receive messages to and from compatible phones that also
subscribe to a message service. You can also send and receive
multimedia and e-mail messages.
Messages may contain malicious software or otherwise
be harmful to your device.
Note: The message sent icon or text on your device screen
does not indicate that the message is received at the
intended destination.
■ Text Messages
When composing text messages (SMS) or enhanced messages (EMS,
messages that can contain simple pictures, sounds, animations, or
melodies), the number of characters used (out of a maximum per
message) appears in the top left corner of the message screen.
Segments are created when the message length exceeds the maximum
allowed number of characters. The number of segments used (out
of a maximum of 7) appears in the top right corner of the message
screen. No additional text can be entered when all segments and
characters have been used. Segments are delivered as individual
messages. For information on entering text into messages, see "Text
Entry," p. 27.
■ Picture Messages
Picture messages are multimedia messages that can contain text,
pictures, camera pictures, slides, and sound recordings. Depending
upon your network services, you may receive a message that includes
an internet address where you can view the picture messages.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
M e s s a g i n g
Pictures are scaled to fit the display area. Your phone has a picture
message viewer for playing messages. Incoming messages remain
in the inbox until you delete them (when Auto Erase Inbox is set
to off, see "Message Settings," p. 41). When you save the picture
message, you can use the image as wallpaper or use the sound
as a ringtone, unless the content is protected by copyright.
See "Pictures," p. 30.
Note: Only devices that have compatible features can
receive and display multimedia messages. The appearance
of a message may vary depending on the receiving device.
Copyright protection may prevent some images, music, and other
content from being copied, modified, or transferred.
Contact Verizon Wireless for availability of and a subscription to
the multimedia messaging service (MMS).
If you are making a call, or browsing the internet, or you have other
applications running, you can receive multimedia message
notifications, but not the actual message. The delivery of
multimedia messages can fail for a number of reasons, so do not
rely solely on them for essential communications.
■ New Message
To compose a new message from Standby Mode, select MENU >
Messaging > New Message > TXT Message or Picture Message or
from Standby Mode press the Left Soft key Message > New
Message > TXT Message or Picture Message.
TXT Message
To write and send a text message, do the following:
1. Select a recipient. To add an existing number or address, select
Add > From Contacts, Recent Calls, or Groups, highlight the
recipient, and select MARK > Done.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
M e s s a g i n g
You may also use the Alphanumeric keypad to manually enter a
phone number or e-mail address in the To: field. The default entry
mode for the To: field is 123 (number). To switch to Multi-tap
Mode to enter an e-mail address, utilize the Soft key to select
123 > Word, Abc, ABC, or Symbols. See "Text Entry," p. 27.
2. To access the text entry field, select OK.
3. Compose a message using the Alphanumeric keypad.
See "Text Entry," p. 27.
4. To send the message, select SEND, or press the Send key
.
To save the message as a draft before you send it, press the End key
, and select Yes. Your message is saved in the Drafts folder.
TXT message options
To customize a new text message, select Options when the cursor
is in the text entry field, and one of the following options:
Save As Draft — Save your message in the Drafts folder.
Add Graphic — Include a graphic icon in your message. Enhanced
messages cannot be sent to e-mail addresses.
Add Sound — Include a sound in your message. Enhanced messages
cannot be sent to e-mail addresses.
Add Name Card — Include a name card in your text message.
Add Quick Text — Insert text from the Add Quick Text gallery into
your document. See the Quick Text option under "Message
Settings," p. 41.
Priority Level — Set the priority level. Select High, or Normal. If set
to high, "URGENT" appears at the top of receiver’s message.
Cancel Message — Close the message without sending it. To save it in
the Drafts folder, select Yes. To delete the message and exit, select No.
Picture Message
To compose and send a picture message, do the following:
36
Download from Www.Somanuals.com. All Manuals Search And Download.
M e s s a g i n g
1. To compose a new message from Standby Mode, select MENU >
Messaging > New Message > Picture Message or press the Left
Soft key Message > New Message > Picture Message. Select a
recipient or enter in the contact phone number or email
address. For more information, see "TXT Message," p. 35.
2. To access the text entry field, select OK.
3. Enter the message in the Text: field using the keypad. See "Text
Entry," p. 27. The number of characters used (out of a maximum
of 1000 per message) appears in the top left corner of the picture
message screen. No additional text can be entered when all
characters have been used.
4. To add a picture, scroll to Picture:, and select My Pics. Scroll to
the desired picture and select OK. To add a new picture using the
built-in camera, select My Pics > Options > Take Picture > OK.
5. To add a sound file, scroll to Sound:, and select Sounds. Scroll to
the desired sound and select OK. To record a new sound, select
Sounds > Record New. To listen to a recorded sound, select Play.
6. To add a message title, scroll to Subject:. Enter text (up to 80
characters) using the keypad.
7. To send the message, select SEND, or press the Send key
.
To save the message as a draft before you send it, press the
End key
, and select Yes. Your message is saved in the
Drafts folder.
Picture message options
To set picture message options, select Options, when the cursor is
in the Text:, Picture:, Sound:, or Subject: fields, and you may select
from the following:
Preview — View your message.
Save As Draft — Save your message to the Drafts folder.
Add Quick Text — Insert text from the Add Quick Text gallery
(in Text: and Subject: only).
37
Download from Www.Somanuals.com. All Manuals Search And Download.
M e s s a g i n g
Add Slide — Add a slide to the message.
Priority Level — Set the priority level to High or Normal.
Remove Picture — Remove a picture from the message
(if previously added, and when the cursor is in this field).
Remove Sound — Remove a sound file from the message
(if previously added, and when the cursor is in this field).
Remove Slide — Remove slide file from the message
(if previously added).
Cancel Message — Close the message without sending it. To save it
in the Drafts folder, select Yes > OK. To delete the message and
exit, select No.
■ Inbox
Your phone can receive text messages, enhanced messages,
picture messages, e-mails using SMS, and alerts in the
Inbox (network service).
When you receive an incoming message, an alert is displayed. To
immediately view the new picture, or text message (if TXT Auto View
is off), select View Now. If you select View Later, the new message
notification icon
is displayed.
The text (if TXT Auto View is on), or picture message will be
automatically displayed. For details, see "Message Settings," p. 41.
View the Inbox
To access the Inbox, from Standby Mode, select MENU >
Messaging > Inbox or press the Left Soft key Message > Inbox. The
number of messages in the inbox is shown in parentheses. When
you open the inbox, the list of messages is displayed. The newest
messages are displayed first. Select a message and Erase > Yes to
delete the selected message, select OPEN to view the message, or
select Options and from the following:
38
Download from Www.Somanuals.com. All Manuals Search And Download.
M e s s a g i n g
Reply — Send a TXT Message, or Picture Message reply.
Reply w. copy — Send a reply which includes the original message
text (text messages only).
Forward — Forward the message to another phone number, or
e-mail address or upload the message to Online Album.
Lock — Protect the message from being deleted.
Add To Contacts — Save the contact information to Contacts
(if the recipient is not in the Contact List).
Erase Inbox — Delete all messages in your inbox.
Message Info — Display sender information, time stamp, and
other information.
View or play messages
To view or play a message in the inbox, select the message and OPEN.
If necessary, scroll up or down to view the whole message.
Erase — To delete the selected message, select Yes > OK.
Mute — Disable the sound (for picture messages with sound attached).
REPLY — Send a TXT Message, or Picture Message reply.
Select Options and you may select from the following:
•
Play Again — Listen to the sound again (for picture messages
with sound attached).
•
•
•
Forward — Forward the message to another recipient.
Erase — Delete the message.
Save Picture — Save the picture (for messages with a
picture attached).
•
•
Save As Ringtone — Save the sound and use it as your ringtone
(for picture messages with sound attached).
Save Sound — Save the sound (for picture messages with
sound attached).
39
Download from Www.Somanuals.com. All Manuals Search And Download.
M e s s a g i n g
•
Reply w. copy — Send a reply which includes the original
message text (text messages only).
•
Save Quick Text — Save the message text in the Quick
Text gallery.
•
•
Lock — Protect the message from being erased.
Add To Contacts — Save the contact information to the
Contacts (if the recipient is not in the Contact List).
•
Message Info — Display sender information, time stamp, and
other information.
■ Sent Messages
The Sent folder stores text, or picture messages that have been
delivered to their recipients. The number of messages stored in the
Sent folder is shown in brackets. To open the Sent folder, from
Standby Mode, select MENU > Messaging > Sent or press the Left
Soft key Message > Sent.
The list of sent messages is displayed. The newest message is
displayed first. Highlight a message, and you may select from
the following:
Erase — To delete the sent message, select Yes.
Options — Select from the available options.
OPEN — View the message. With the message open, press Options
and you may select from the following:
•
Play Again — Play the sound again (for picture messages with
sound attached).
•
•
Forward — Forward the message to another recipient.
Erase — Delete the selected sent message (for picture messages
with sound attached).
•
Lock — Protect the message from being erased.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
M e s s a g i n g
•
•
•
Save Quick Text — Save the message text in the Quick
Text gallery.
Add To Contacts — Add the recipient to Contacts (if the recipient
is not in the Contact List).
Message Info — Display recipient information, time stamp, and
other information.
■ Draft Messages
The draft folder is used to store drafts of text and picture messages.
The number of messages stored in Drafts is shown in brackets. To
open the Drafts folder, from Standby Mode, select MENU >
Messaging > Drafts or press the Left Soft key Message > Drafts.
The newest message is displayed first. Highlight a message, and
select from the available options.
■ Message Settings
To configure settings for messages, from Standby Mode, select
MENU > Messaging and press the Left Soft key Settings, or press
the Left Soft key Message and press the Left Soft key Settings, and
one of the following:
Entry Mode — Change the Default Entry mode for writing text to
Word, Abc, ABC, 123.
Auto Save Sent — Select whether to automatically save all sent
messages to the Sent folder. To be asked every time to save a sent
message, select Prompt.
Auto Erase Inbox — Select whether to automatically erase the oldest
(unlocked) message from the Inbox when the device memory is
full. If set to Off, you are prompted to delete messages from your
Inbox when the memory is full.
TXT Auto View — Select whether to display incoming text messages
automatically. If set to Off, it will display a prompt message to
select View Now or View Later when a message is received.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
M e s s a g i n g
Picture Auto Receive — Select whether to save incoming picture
messages automatically. If set to Off, you can select Reject to
refuse to receive the message.
Quick Text — View and edit Quick Text entries, which are short,
prewritten messages that can be recalled and inserted into a text
message. The gallery of preloaded and user-defined Quick Text
entries is displayed. To add an entry, select New, enter the text, and
select OK. To erase a Quick Text entry, highlight the entry, and
select Erase > Yes.
Voicemail # — Change the default 1-touch dialing number for
voicemail. Enter the new number, and select OK.
Callback # — Change the default callback number. Enter the new
number, and select OK.
Signature — Create or edit text that is appended to each outgoing
message. If you do not want to add a signature, select None > OK.
Select Custom, enter the signature text, and select OK.
■ Voicemail Messages
Voicemail is a network service that allows you to listen to voice
messages recorded in the voicemail box. When you have a new
voice message, your phone alerts you and prompts you to listen
now or later. If you select Listen later, the voicemail icon
is
displayed in Standby Mode.
Listen to voicemail messages
When you see a new voice message alert, select Listen now to
access your voicemail box. You can also select Message > Voicemail,
or press and hold the voicemail 1-touch dial key
.
The number of new messages and the date and time of the last
message received are displayed. To access your voicemail box,
select CALL. To reset the voicemail counter, select Clear > Yes.
The new voicemail icon disappears from the screen.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
M e s s a g i n g
Resetting the voicemail counter does not delete voicemail from your
voicemail box. To delete messages, you must access your voicemail
box and use the voicemail system commands. If the storage limit
of your voicemail box is exceeded, old messages may be overwritten.
■ Mobile Instant Messaging
For details about instant messaging (network service), see
"Mobile Instant Messaging," p. 54.
■ E-mail Messages
For details about E-mail messages (network service), see
"E-mail Messages," p. 53.
■ Chat
To launch a browser and chat with IM users (network service),
in Standby Mode, select Message > Chat.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
C o n t a c t s
6. Contacts
You can keep track of contact information in Contacts. Contact
names are saved in Contacts memory, and each contact entry can
contain multiple phone numbers and e-mail addresses. Contact
entries can be assigned to 1-touch dials, picture IDs, ringtones, and
caller groups.
■ Create New Contacts
To add a contact to your Contact List:
1. Select MENU > Contacts > New Contact.
2. Scroll to each field, and enter the contact information for any
of the following:
Name: — the name of the contact, which is displayed in the
Contact List. If no name is entered, the default phone number
or email address is displayed in the Contact List.
Mobile 1: — the primary mobile phone number for the contact.
This is the default number for the contact.
Home: — the home phone number for the contact
Work: — the business phone number for the contact
Email 1: — the primary e-mail address for the contact
Group: — a caller group for the contact. See "Edit caller
groups," p. 48.
Picture: — a picture ID for the contact. See "Assign Picture ID,"
p. 46.
Ringtone: — a distinctive ringtone for the caller.
See "Add a Ringtone," p. 46.
Mobile 2: — the secondary mobile phone number for the contact
Fax: — the fax number for the contact
Email 2: — the secondary e-mail address for the contact
44
Download from Www.Somanuals.com. All Manuals Search And Download.
C o n t a c t s
3. Select SAVE.
You can also quickly create a contact in Standby Mode by entering
the number and selecting Save > Add New Contact and follow the
steps above. If no name is entered, the default phone number or
email address is displayed in the Contact List.
Change the default number
The default number is the contact number that is called when you
dial by contact name. To change the default number when multiple
numbers are assigned to a single contact:
1. Select Contacts, then scroll to the contact you wish to modify,
and press Edit.
2. Highlight the phone number you wish to set as the default
number, and select Options > Set As Default > OK > Yes or No.
Set up phone numbers with pauses
Pause codes instruct the receiving system to pause or wait before
entering the numbers that follow them in the dialing string. You
can insert a wait or pause to separate additional digits (for
example, a password or extension) from the main phone number.
To add a pause code to a new phone number in Standby Mode, do
the following:
1. Enter the number. Select Options and one of the following:
2-Sec Pause — to set the device to pause for two seconds
before dialing the secondary numbers. "P" appears in the
dialing string. You can enter as many pauses as you need to
accommodate the timing on automated answering services.
Wait — to set the phone to wait for you to send (or manually
enter) the secondary numbers. "W" appears in the dialing string.
2. Enter additional number(s) and select Save.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
C o n t a c t s
3. If Add New Contact is selected, choose a number, and select
OK. Enter a name or other fields, and select SAVE.
4. If Update Existing is selected, choose an existing contact > a
number > OK.
Assign Picture ID
You can set the phone to display the picture of a caller from your
Contact List when your phone rings. To assign a picture ID to a
contact in Standby Mode:
1. Select Contacts, scroll to the contact you wish to modify, and
select Edit.
2. Scroll to the Picture: field, and select Set.
3. Highlight an image from My Pictures, and select OK.
4. To save the picture ID for the contact, select SAVE.
Add a Ringtone
You can add a distinctive ringtone to distinguish which contact is
calling. To assign a ringtone to a contact in Standby Mode:
1. Select Contacts, scroll to the contact you wish to modify, and
select Edit.
2. Scroll to the Ringtone: field, and select Set.
3. Highlight an existing ringtone from the ringtone list, and select
OK, or select Play to listen to the ringtone.
4. To save the Ringtone for the contact, select SAVE.
■ Contact List
The Contact List can store up to 500 contacts. The amount of
numbers, email addresses, and contact information that you can
save may vary, depending on the length and the total number of
entries in the Contact List.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
C o n t a c t s
Access the Contact List
To view the Contact List, press Contacts in Standby Mode, or select
want, enter the first letter of the contact name in the Go To field.
Matching entries are displayed.
To call the highlighted contact, press the Send key
. When you
select a contact name, the default number associated with the
contact is used unless you select another number. To call another
number of the highlighted contact, select VIEW, scroll to a number,
and press the Send key
. Or you can scroll left or right using
the Directional key , and press the Send key
.
View or Edit the Contact List
To edit a contact in Standby Mode, select Contacts, scroll to
desired contact, and select Edit.
To view contact information, select Contacts, scroll to desired
contact, and select VIEW. Numbers, e-mail addresses, or groups are
displayed for the contact. Select one of the following:
Erase — Delete the contact.
EDIT — Modify the contact information. For editing options,
see "Create New Contacts," p. 44.
Options— Send a text, select New TXT Msg or picture message, select
New Picture Msg to the contact. To call the contact, select Call.
Contact List Options
In Standby Mode, select Contacts, scroll to the contact you want,
select Options, and choose from the following:
New Contact — Create a new contact.
Erase — Delete the contact.
New TXT Msg — Send the contact a text message (network service).
New Picture Msg — Send the contact a picture message
(network service).
47
Download from Www.Somanuals.com. All Manuals Search And Download.
C o n t a c t s
Set As ICE Contact or Unassign ICE Contact — Assign or unassign
your contact as an ICE (In Case of Emergency) contact.
Call — Dial the contact (network service).
Send Name Card — Send the name card to a compatible device
using Bluetooth.
Erase All — Delete all contacts.
■ Groups
From Standby Mode, to access the Groups menu, select MENU >
Contacts > Groups. The default caller groups are No Group,
Business, Family, Friends, Other, and VIP.
A contact can only be associated with one caller group at a time.
If you add a contact from one group to another group, that contact
is removed from the first group.
Create a new caller group
In Standby Mode, select MENU > Contacts > Groups > New,
enter the new group name, and select SAVE. See "Add contacts to
groups," p. 48.
Edit caller groups
Once created, caller groups can be updated with new contacts,
renamed, or erased. The default caller groups cannot be renamed
or erased.
Add contacts to groups
To edit caller groups and assign contacts to them:
1. In Standby Mode, select MENU > Contacts > Groups.
2. Highlight a group from the list, and select VIEW > ADD; or
Options > Add.
3. Highlight the desired contact, select MARK and continue until
all contacts are marked and then select Done.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
C o n t a c t s
To edit individual contacts and add them to caller groups:
1. In Standby Mode, select Contacts, scroll to the contact you
want to add to a group, and Edit.
2. Scroll to the Group: field, and select Set.
3. Highlight an existing group from the list of group names, and
select OK. Select SAVE to update the contact.
Rename a group
In Standby Mode, select MENU > Contacts > Groups, highlight the
group you want to rename (except the default groups), and select
Options > Rename. Edit the caller group name, and select SAVE.
Erase a group
To erase a group you have created. From the Standby Mode,
select MENU > Contacts > Groups, highlight the group, and
select Options > Erase > Yes. The contacts associated with the
group are not erased.
Send a group message
To send a message to a group (network service). From the Standby
Mode, select MENU > Contacts > Groups, the group name, and
Options > New TXT Msg or New Picture Msg. Create the message
you want to send to the group, and select SEND. See "New
Message," p. 35.
■ 1-touch Dials
You can associate any mobile, home, or work number in the Contact
List with a 1-touch dial key from 2 to 999 (network service). 1-touch
dial key
is used to access voicemail. 1-touch dial keys 97 (#BAL)
are used to check your billing balance. 1-touch dial keys 98 (#MIN)
are used to check your Verizon Wireless usage. 1-touch dial keys
99 (#PMT) are used to make a bill payment. To dial a 1-touch dial
number, see "Call a 1-touch dial number," p. 23.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
C o n t a c t s
Set up 1-touch dialing
1. From Standby Mode, select MENU > Contacts > Speed Dials.
2. Scroll to an unassigned 1-touch dial slot, and select SET.
3. Highlight the contact you want to assign to the selected 1-touch
dial slot, and select OK.
4. If more than one number is saved in the contact, highlight the
mobile, home, or work number you want to assign, and select
OK. Select OK again to set. If only one number is saved, "Set
Speed Dial to contact?" will appear on your display. Select Yes
and press the OK key to save the speed dial.
Edit 1-touch dial numbers
1. From Standby Mode, select MENU > Contacts > Speed Dials.
2. Scroll to an assigned 1-touch dial slot, and select SET.
3. Select Yes to overwrite the existing 1-touch dial number.
Highlight the contact you want assigned to the selected 1-touch
dial slot, and select OK.
4. If more than one number is saved in the contact, highlight the
new mobile, home, or work number you want to assign, and
select OK. Select Yes to set.
Delete 1-touch dial numbers
From Standby Mode, select MENU > Contacts > Speed Dials, scroll
to desired assigned 1-touch dial slot, and Remove > Yes.
Or in Standby Mode select Contacts > scroll to a contact assigned
with 1-touch dial numbers > VIEW > a number > EDIT > Options>
Remove Speed Dial > Yes.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
C o n t a c t s
■ In Case of Emergency (ICE)
You can set up to three contacts as your In Case of Emergency
(ICE) contacts. You can call ICE contacts even if your phone is
locked. See "Security," p. 72.
A contact can only be assigned as one ICE contact. If you assign
the same contact to different ICE contacts, your phone accepts
the last assignment only.
Add a new ICE contact
To add a new ICE contact, do the following:
1. From Standby Mode, select MENU > Contacts > In Case of
Emergency, an unassigned contact, and ADD. Select one of
the following:
From Contacts — Add an existing contact from your Contact List.
New Contact — Create a new contact and set it as an ICE
contact. See "Create New Contacts," p. 44.
2. If From Contacts is selected, highlight a contact, and select OK.
3. If New Contact is selected, enter a name or other fields, and
select SAVE.
ICE contacts options
For more options on ICE contacts. From Standby Mode, select
MENU > Contacts > In Case of Emergency, an assigned contact,
and from the following:
Call — Call the ICE contact.
VIEW — View the details of the contact.
•
To delete the contact from Contact List, select Erase.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
C o n t a c t s
•
To modify the information of the contact, select EDIT. For editing
options, see "Create New Contacts," p. 44. Both the erase and
edit options affect your Contact List. For example, if you erase a
contact, the contact is deleted from both ICE contacts list and
Contact List. Always be careful when you select either option.
•
For further contact options, select Options > New TXT Msg,
New Picture Msg, or Call.
Options — Modify the ICE contact entry. To assign another contact as
the ICE contact entry, select Re-assign. See "Add a new ICE contact,"
p. 51. To unassign the entry, select Unassign.
Add Personal Information
To create personal information of your own, or for ICE contacts.
From Standby Mode, select MENU > Contacts > In Case of
Emergency > Personal Info > ADD. After adding the information,
press SAVE to retain it, or Cancel to exit.
To edit or erase the existing note, highlight a note > VIEW > EDIT
or press Erase > Yes to delete the selected note.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
E - m a i l M e s s a g e s
7. E-mail Messages
To launch the internet browser and access the email messaging
screen (network service), in Standby Mode, select Message >
Email. A Mobile Web session starts, scroll to an email provider
and press the OK key. Follow the on-screen prompts to log into
your account.
Important: Exercise caution when opening messages.
Messages may contain malicious software or otherwise
be harmful to your phone.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
M o b i l e I n s t a n t M e s s a g i n g
8. Mobile Instant Messaging
To access instant messaging (network service), in Standby Mode,
select Message > Mobile IM > Get New Applications to download
IM applications, or use one of the applications preloaded. After
launch the application, press the Right soft key Menu, scroll to
"Go To URL" to enter a web address for your IM site, and follow
the on-screen prompts to log into your account.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
M y R i n g t o n e s
9. My Ringtones
You can set your favorite music as a ringtone, a contact ID for a
particular contact, or as alert sounds for calendar entries through
My Ringtones. From Standby Mode, select MENU > My Ringtones >
Get New Applications > Get New Applications again to download a
new ringtone, or use one of the tones stored in the this folder.
To apply a ringtone, highlight the tone, and select Set As > Ringtone,
Contact ID, or Alert Sounds. To listen to the highlighted ringtone,
select PLAY. To delete the highlighted ringtone (except the default
ringtones), select Options > Erase, or File Info to view file information
about the highlighted ringtone.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
R e c e n t C a l l s
10. Recent Calls
Information about missed, received, or dialed calls is stored in
Recent Calls. When the number of calls exceeds the maximum,
the most recent call replaces the oldest.
■ View Calls
To view calls from Standby Mode, select MENU > Recent Calls >
Missed, Received, Dialed, Blocked (Blocked is only available when
Block All or Contacts Only is set to incoming calls. See "Security,"
p. 72), All, or View Timers. The calls are listed by most recent first.
Missed calls are calls that are not answered. The missed calls feature
does not function when your phone is turned off. Received calls are
calls that are answered. All dialed calls are saved in Dialed. The calls
that are dialing from the restricted list are saved in Blocked.
When viewing the call lists, the following options are available:
Message — Send the selected number a New TXT Msg or New
Picture Msg. See "New Message," p. 35. This option is not shown
for unavailable or voicemail numbers.
OPEN — View call details.
Options — To view more details, or protect the call from being
erased, select Save, Erase, Lock, Erase All, or View Timers.
■ View Call Timers
You can view the total number of calls, duration (mm:ss) of calls,
and the data transfer information with the View Timers option.
From Standby Mode, select MENU > Recent Calls > View Timers >
Last Call, All Calls, Received Calls, Dialed Calls, Roaming Calls,
Transmit Data, Received Data, Total Data, Last Reset, Lifetime Calls,
or Lifetime Data Counter.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
R e c e n t C a l l s
Note: Some timers may be reset during service or software
upgrades. The actual time invoiced for calls and services by
Verizon Wireless may vary, depending on network features,
rounding off for billing, taxes, and so forth.
Reset Call Timers
To reset a selected call or data timer or to reset all timers to zero
(except Lifetime Calls and Lifetime Data Counter), do the following:
1. From Standby Mode, select MENU > Recent Calls > View Timers.
2. Highlight the timer you want to modify, and select Reset > Yes.
3. Select Reset All > Yes to reset all timers (except Lifetime Calls
and Lifetime Data Counter).
57
Download from Www.Somanuals.com. All Manuals Search And Download.
V Z N a v i g a t o r
11. VZ Navigator
VZ Navigator supports GPS-related service, helping you find your
way. With VZ Navigator, you can get your current location, or get
directions from the current location to a selected address. Select
MENU > VZ Navigator > OK to download navigator applications.
To use this service, you must turn on Location On, see "Location
Setting," p. 72.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s
&
T o o l s
12. Settings & Tools
Use the Settings & Tools menu to customize your phone and to use
your phone as an organizer and personal digital assistant.
■ My Verizon
The Verizon Wireless My Verizon web portal (network service) allows
you to access your account information. From Standby Mode, select
MENU > Settings & Tools > My Verizon or press the Directional
key to the left in Standby Mode. For more information, contact
Verizon Wireless.
■ Tools
To access the voice commands, calculator, calendar, calendar
preview, alarm clock, stopwatch, world clock, and notepad. From
Standby Mode, select MENU > Settings & Tools > Tools.
Voice Commands
Voice commands allow you to do things by verbal command
(for example, make calls, confirm voicemail, and so on). To activate
voice commands. From Standby Mode, select MENU > Settings &
Tools > Tools > Voice Commands, or press the Voice Command key
on the right side of the phone. See "Phone at A Glance,"
p. 11. For more details, see "Voice commands," p. 78.
Calculator
Calculator allows you to perform simple mathematical calculations.
To use the calculator:
1. From Standby Mode, select MENU > Settings & Tools >
Tools > Calculator.
2. Enter the first number of the calculation using the
Alphanumeric keypad.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s
&
T o o l s
3. Use the Directional key to add (up), subtract (down), multiply
(right), or divide (left) values.
4. Enter the second number.
5. Press the OK key (equals) to solve your equation.
Select Operator to use parentheses in your equation or to enter an
exponent (Power).
Press the Clear key
cancel your calculation and clear the screen.
Press # to switch a value to positive or negative, and press *
to enter a decimal point.
to delete a keystroke, or select Clear to
Note: This calculator has limited accuracy and is designed
for simple calculations.
Calendar
The calendar allows you to document your agenda and keep it
convenient and easy to access. You can schedule events into the
calendar and set your phone to alert you with a reminder.
Schedule a new event
1. From Standby Mode, select MENU > Settings & Tools > Tools >
Calendar (or press down on the Directional key in Standby
Mode). Scroll to the required event date and select Add.
2. Enter the event title, start and end date, and time using the
Alphanumeric keypad.
3. To set the time zone, select Time Zone > Set > a zone > OK.
4. To set the frequency, select Recurrence > Set > a frequency > OK.
5. To set a tone, select Tone > Set > a tone > OK.
6. To set vibrate on, select Vibrate > Set > On > OK.
7. To set a reminder, select Reminder > Set > a setting > OK.
8. To save the settings, select SAVE. The date scheduled with
events is highlighted in different color.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s
&
T o o l s
Delete an existing event
1. From Standby Mode, select MENU > Settings & Tools > Tools >
Calendar (or press down on the Directional key in Standby
Mode), scroll to the event date, and VIEW.
2. Highlight the event entry you want to remove and press the
Left Soft key Erase > Yes > OK.
Update an existing event
Calendar (or press down on the Directional key in Standby
Mode), scroll to the event date, and VIEW.
2. Highlight the event entry you want to modify, and select
VIEW > EDIT.
3. Highlight and edit the event entry fields you want to update,
and select SAVE.
To set the calendar options. From the Standby Mode, select MENU >
Settings & Tools > Tools > Calendar > Options (or press down on
the Directional key in Standby Mode) and one of the following:
•
•
•
•
•
•
•
Weekly — View a weekly calendar preview.
Daily — View a daily calendar preview.
Go to Date — Enter a specific date using the Alphanumeric keypad.
Erase a Day — Delete the events of a highlighted day.
Erase Passed — Delete past events.
Erase All — Delete all events on your calendar.
Calendar Preview — Display the event information in Standby
Mode. See "Calendar Preview", below.
Calendar Preview
Calendar preview reminds you the events of the current date. From
Standby Mode, select MENU > Settings & Tools > Tools > Calendar
Preview > Main Screen > On. If select Off,
is displayed in
Standby Mode.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s
&
T o o l s
To set the font size of an event. In Standby Mode, select MENU >
Settings & Tools > Tools > Calendar Preview > Font Size > Normal
or Large.
Alarm Clock
Alarm clock allows you to set up to three alarms. You must turn on
your phone to use the alarm clock. To set an alarm:
1. From Standby Mode, select MENU > Settings & Tools > Tools >
Alarm Clock > Alarm 1, Alarm 2, or Alarm 3.
2. Scroll left or right to activate the alarm.
3. Highlight the Set Time field and use the Alphanumeric keypad
to enter the time of day the alarm will sound. Press the Left
Soft key to select either am or pm.
4. To set how often the alarm will occur, highlight the Frequency
field and scroll left or right.
5. To choose an alarm ringtone, highlight the Ringer field, and
select Set, the desired ringtone, and OK.
6. Select SAVE. When an alarm is set,
is displayed in
Standby Mode.
To turn an alarm off, from Standby Mode select MENU > Settings
& Tools > Tools > Alarm Clock. Highlight the alarm you want to
modify, and select OK > change to Off > SAVE > "Set on" will
appear on the display > select No.
When an alarm time is reached, the alarm tone sounds or vibrates,
depending on the master volume settings. To set it to vibrate
without sound, press the Volume keys to Vibrate Only. See "Phone
at A Glance," p. 11. Select Snooze to turn the alarm off and have it
sound again after 10 minutes. Select Dismiss to turn off the alarm.
Stopwatch
The stopwatch can be used to measure elapsed time, such as for a
sporting event. You can time up to ten records.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s
&
T o o l s
The stopwatch accuracy is not the same as that of a professional
instrument. Therefore, Nokia advises against its use for official
competitions or any other event in which a high-precision device
would be required to establish exact times.
To time an event, from Standby Mode, select MENU > Settings &
Tools > Tools > Stopwatch > START. The elapsed time is displayed
in mm:ss:ms format.
To time multiple events and mark the elapsed time for each event
you are measuring, select Split (this option is only available while
timer is running).
To stop the watch, select STOP. To reset the watch to zero, select
Reset when the watch is stopped.
World Clock
World clock allows you to determine the current time in another
time zone or country.
From Standby Mode, select MENU > Settings & Tools > Tools >
World Clock. The world map is displayed.
To display the time in a city, scroll on the world map to the city.
To view a list of cities, select Cities.
To turn daylight savings time On or Off for a city, select the city and
Set DST.
Notepad
Notepad allows you to add, read, edit, or erase notes. To create a
note from Standby Mode, select MENU > Settings & Tools > Tools >
Notepad > New or Add. Enter your note text (see "Text Entry,"
p. 27), and select SAVE.
To view or edit a note, highlight the note, and select VIEW > EDIT.
To delete one note or all notes, select Options > Erase or Erase All.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s
&
T o o l s
■ Bluetooth Menu
Bluetooth technology enables wireless connections between
electronic devices within a range of 10 meters (33 feet). A
Bluetooth connection can be used to send images, text, gallery
files, voice recordings, notes, or to connect wirelessly to other
devices using Bluetooth technology, such as computers. You can
synchronize your phone and your PC using Bluetooth connectivity.
Since devices using Bluetooth technology communicate using radio
waves, your phone and the other devices do not need to be in direct
line-of-sight. However, the connection can be subject to interference
from obstructions, such as walls, or other electronic devices.
This device is compliant with Bluetooth specification 2.0 + EDR
supporting the following profiles: HSP V1.1 (headset profile), HFP
V1.5 (handsfree car kit profile), PBAP (phonebook access profile),
and OPP (object push profile for vCard and vCalendar).
To ensure interoperability between other devices supporting
Bluetooth technology, use Nokia approved enhancements for this
model. Check with the manufacturers of other devices to
determine their compatibility with this device.
There may be restrictions on using Bluetooth technology in some
locations. Check with your local authorities or Verizon Wireless.
For more information, see the Bluetooth Technology organization
From Standby Mode, select MENU > Settings & Tools > Bluetooth
Menu and you may select from the following options:
1. Add New Devices — to set up a pairing between your phone and
another device with Bluetooth technology.
2. Turn On or Turn Off — to activate or deactivate Bluetooth
connectivity.
at the top of the display indicates an active
Bluetooth connection.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s
&
T o o l s
3. Select Options and you may select from the following:
1. My Phone Name — to set the name of your device that is to
be seen by others. Enter a name, and select OK.
2. Discovery Mode — to allow your device to be searched by
other devices in the area. To hide your phone from other
users, select Off.
3. File Receiving — to set the level of security when
receiving files from other devices. There are three levels
of security available:
•
Always Ask — to prompt you for permission each time
you receive a file
•
•
Always Accept — to always accept files
Always Reject — to never accept files
4. Supported Profiles — to view information and help on
supported profiles. For example, to use a Bluetooth headset,
the phone must have the headset profile.
5. My Business Card — to edit details of your business card.
You can send and receive business cards between other
compatible devices.
Note: Operating the device in hidden mode is a safer way
to avoid malicious software. Do not accept Bluetooth
connectivity from sources you do not trust. Alternatively,
switch off the Bluetooth function. This does not affect
other functions of the phone.
Important: Features using Bluetooth technology increase
the demand on battery power and reduce the battery life.
Pair devices
1. From the standby screen, press the OK key (MENU) to access
the Main Menu.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s
&
T o o l s
2. Press up on the Directional key to select Settings & Tools, then
press the OK key to select.
3. Press down on the Directional key to highlight Bluetooth Menu,
then press the OK key to select.
4. With Add New Devices highlighted, press the OK key to select.
5. Put the headset you want to connect to in discoverable mode
and then press the OK key on your phone.
6. Your phone will search for Bluetooth devices nearby and then
display a list of available devices. Press down on the Directional
key until you have highlighted the headset you want to pair
with, then press the OK key (PAIR).
7. Use the Alphanumeric keypad to enter the passkey of the
headset you want to pair with and press the OK key.
8. Your phone will then pair with the headset.
Note: The phone automatically attempts to send a
passkey of “0000” to the device and shows the message
“ATTEMPTING TO AUTO PAIR.” The default PIN code is
usually 0000. Refer to the Bluetooth accessory’s user guide
for additional information.
■ Sounds Settings
To adjust volumes and assign sounds to phone calls and alarms.
From Standby Mode, select MENU > Settings & Tools > Sounds
Settings and from the following:
1. Call Sounds — To set ringtones for incoming calls. Select Call
Ringtone, scroll to the desired ringtone, and press OK. To set the
phone to vibrate when receiving a call, select Call Vibrate > On.
2. Alert Sounds — Select the alert type (Tone, Vibrate, or Reminder)
for an incoming text message, picture message, or voicemail.
SelectEmergency Tone to set the alert type (Alert, Vibrate, or
Off) for emergency dialing.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s
&
T o o l s
3. Keypad Volume — To set the volume for the keypad, press the
Directional key Up and Down (this option only works when
the master volume is not set to All Sounds Off, Alarm Only,
or Vibrate Only by pressing the Volume keys, see "Phone at A
Glance," p. 11).
4. Service Alerts — To activate an alert.
•
ERI — Enhanced roaming indicator (ERI) displays the status
of the mobile service (network service). The status can be
"Verizon Network", "Extended Network", or "Roaming".
See "Banner," p. 67.
•
•
Minute Beep — To sound an alert every minute while in
a call.
Call Connect — To alert you when a call is connected.
5. Power On/Off — To enable or disable tones when your phone is
turned on or off (this option only works when the master
volume is not set to All Sounds Off, Alarm Only, or Vibrate Only
by pressing the Volume keys, see "Phone at A Glance," p. 11).
■ Display Settings
To modify the look and feel of the display. From Standby Mode,
select MENU > Settings & Tools > Display Settings.
Banner
To display a text banner In Standby Mode screen, select MENU >
Settings & Tools > Display Settings > Banner and from the following:
Personal Banner — Enter your own banner text of up to 18
characters. To change the text color, select Text Color.
ERI Banner — Select On to display the status of the mobile network
above your personal banner (network service).
67
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s
&
T o o l s
Backlight
To conserve battery life, you can set the phone backlighting to dim
when not used. To set the backlight duration, in Standby Mode,
select MENU > Settings & Tools > Display Settings > Backlight and
from the following:
Display — To set how long the main display backlight remains on,
scroll and select either 7 seconds, 15 Seconds, 30 Seconds, Always
On, or Always Off and then press OK.
Keypad — To set how long the keypad backlight remains on, scroll
and select either 7 seconds, 15 Seconds, 30 Seconds, Always On, or
Always Off and then press OK.
Wallpaper
To set your phone to display a background picture (wallpaper), from
Standby Mode, select MENU > Settings & Tools > Display Settings >
Wallpaper > Main Screen > My Pictures or Fun Animations > an
image or an animation and press OK, or Wallpaper > Front Screen >
an image and press OK.
Select View by pressing the Left Soft key to preview an image file
as wallpaper. To browse for a new wallpaper, press the Right Soft
key to select Get New.
Display Themes
To choose the color theme of the background screen, from Standby
Mode, select MENU > Settings & Tools > Display Settings > Display
Themes > Classic, Balloon, Bamboo, or Gumballs > SET. Press the
Left Soft key to Preview a highlighted theme.
Note: The default setting of Display Themes is Classic.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s
&
T o o l s
Main Menu Settings
To set the layout of the menu screen, from Standby Mode, select
MENU> Settings & Tools > Display Settings > Main Menu Settings >
Tab, List, or Grid. Press the Left Soft key to Preview the highlighted
layout and then List to return to the available layout options. Select
SET to select the highlighted layout.
Note: The default setting of Main Menu Settings is List.
Dial Fonts
To set the font size of the characters displayed when entering a
phone number, from Standby Mode, select MENU > Settings &
Tools > Display Settings > Dial Fonts and select Normal or Large.
Clock Format
To set the clock format on your phone’s main display or front
display, from Standby Mode, select MENU > Settings & Tools >
Display Settings > Clock Format and select Main Clock > Analog,
Large Analog, Digital 12, Large Digital 12, Digital 24, Large Digital
24, Classic, or Off, or Front Clock > Digital, Analog, or Off.
Note: The default settings of Main Clock and Front Clock
are Large Digital 12 and Digital.
■ Phone Settings
The Phone Settings menu allows you to designate specific network
settings and operational modes for your phone.
Airplane Mode
Airplane Mode prevents your phone from receiving radio frequencies,
while you can still use functions that do not require network service.
To activate Airplane Mode, from Standby Mode select MENU >
Settings & Tools > Phone Settings > Airplane Mode > On.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s
&
T o o l s
Set Shortcuts
Shortcuts allow you to quickly access certain functions. To access
your shortcuts, in Standby Mode, press the Directional key Right.
Select the shortcut from the available options.
For the default shortcuts, see "My shortcuts," p. 16.
To change the shortcuts, do the following:
1. From Standby Mode, select Menu > Settings & Tools > Phone
Settings > Set Shortcuts > Set My Shortcuts.
2. Select Shortcut 1, Shortcut 2, Shortcut 3, or Shortcut 4, and SET.
3. Select the application you want and select OK.
To reset the assigned shortcut to the default setting, highlight the
shortcut, and select the Right Soft key Options > Reset Shortcut #
and press OK.
To reset all of the assigned shortcuts to the default setting, select
Options > Reset My Shortcuts and press OK.
To move the shortcuts, do the following:
1. Press right on the Directional key in Standby Mode.
2. Select a shortcut and press the Right Soft key Move.
3. Press up or down on the Directional key to move the
highlighted shortcut, and select SAVE.
Set Directional Keys
To set applications and shortcuts to your Directional key when
pressing Up, Left or Down, do the following:
1. From Standby Mode, select Menu > Settings & Tools > Phone
Settings > Set Shortcuts > Set Directional Keys.
2. Scroll to and select the key to which you want to assign the
application, and press SET.
3. Scroll to and select the application you want and OK.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s
&
T o o l s
To reset the selected Directional key to the default setting, highlight
the key, and press the Right Soft key Options > Reset (Direction)
Key and press OK.
To reset all Directional keys to their default setting, press the Right
Soft key Options scroll to Reset Directional Keys and press OK.
Voice Command Settings
To change the settings for voice commands, from Standby Mode,
select MENU > Settings & Tools > Phone Settings > Voice Command
Settings, scroll to and choose from the available options:
1. Choice List — When your phone is unsure of the name or number
you have said, a list of three choices is shown. To display the
choices, select Automatic or Always On. To display only the best
match, select Always Off.
2. Sensitivity — Use the Directional key to set how sensitive the
voice recognition on your phone is. If many of your voice
commands are rejected, press Down on the Directional key
to adjust the setting towards Reject Less. If your phone is not
recognizing your commands correctly and is activating the
wrong names or numbers, press Up on the Directional key to
adjust the setting towards Reject More.
3. Digit Dialing — Set how your phone recognizes your voice for
each number on your keypad.
•
Adapt Digits — To allow your phone to recognize your voice
for each number on your keypad. Your phone asks you to say
a sequence of numbers, so they can be recorded and played
back to you. You can rerecord them if you are unhappy with
your pronunciation, or select OK to accept them.
•
Reset Digits — To restore the number sounds to the original
factory settings, if you changed them using Adapt Digits.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s
&
T o o l s
4. Sound — Select Mode > Prompt Mode for the phone to prompt
you for information, Readout Mode to prompt you and read the
menu items as you navigate, or Tones Only Mode to prompt you
with beeps only.
Select Name Settings > Speed to change the speed that a name
is played back, or Volume to change the volume that a name is
played back.
Select Speakerphone to turn the speakerphone on or off when
the voice recognition is activated.
5. About — to view information about the voice signal.
Language
To set the default language of your phone menu and displays, from
Standby Mode, select MENU > Settings & Tools > Phone Settings >
Language > English or Español.
Location Setting
To share position information over the network, select MENU >
Settings & Tools > Phone Settings > Location Setting. Select Location
On to make position information continually available, or E911 Only
to make it available for emergency services only. Press OK to select.
For calls to emergency numbers, location information may be used
by the emergency operator to determine the position of the phone.
This feature may not function in all areas or at all times. The
functionality and accuracy of this feature are dependent on the
network, satellite systems, the agency receiving the information
and the fold position. Keeping the fold open helps strengthen the
signal of the internal GPS antenna.
Security
To protect the device from unauthorized use, from Standby Mode,
select MENU > Settings & Tools > Phone Settings > Security.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s
&
T o o l s
Enter your security code which is by default the last four digits of
your phone number and press OK. Select from the following options:
Edit Codes — To change the security code.
Restrictions — To prevent the use of certain functions. Enter your
security code which is by default the last four digits of your phone
number and press OK.
•
•
•
Location Setting — To require the security code to access
Location Setting, select Location Setting > Lock Setting.
See "Location Setting," p. 72.
Calls — To restrict calls, select Incoming Calls or Outgoing
Calls and select from the following: Allow All, Contacts
Only, or Block All.
Messages — To restrict messages, select Incoming
Messages or Outgoing Messages and select from the
following: Allow All or Block All.
Phone Lock Setting — Select from Unlocked or On Power Up. For On
Power Up, only emergency call, answering incoming calls, and
functions of viewing personal information under ICE Contacts List
are available. To disable this setting, select Unlocked.
Lock Phone Now — To lock the phone with security code. When the
phone is locked, you must enter your lock code to use the phone again.
Restore Phone — To reset phone settings to factory defaults.
System Select
To set your phone to roam or search for another network when
you are not in your home area, from Standby Mode, select MENU >
Settings & Tools > Phone Settings > System Select and one of the
following options:
Home Only — Make and receive calls in your home area only.
Automatic A or Automatic B — Search for service in another network.
The roaming rate applies when you are not in your home area.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s
&
T o o l s
NAM Selection
If your phone is registered with two phone numbers using number
assignment modules (NAM) (for example, work and personal
numbers), you can choose which number to show to the recipients of
your calls. From Standby Mode, select MENU > Settings & Tools >
Phone Settings > NAM Selection > NAM 1 or NAM 2.
■ Call Settings
To define how to handle incoming and outgoing calls, from
Standby Mode, select MENU > Settings & Tools > Call Settings.
Answer Options
To determine how calls may be answered on your phone. From
Standby Mode, select MENU > Settings & Tools > Call Settings >
Answer Options and one of the following:
Flip Open — Answer the call by opening the flip (default setting).
Any Key — Answer the call by pressing any key on the keypad.
Auto With Handsfree — Answer the call automatically in about
5 seconds when a headset or hands-free car kit is attached to
the device.
Auto Retry
To set the phone to automatically redial a number when the
attempted call fails, from Standby Mode, select MENU > Settings
& Tools > Call Settings > Auto Retry, select On and press OK.
Occasionally, your network may experience heavy traffic resulting
in a fast busy signal when you dial. With automatic retry, your
phone redials the number (the number of times is specified by the
network) and notifies you when the network is available.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s
&
T o o l s
TTY Mode
A phone with TTY/TDD (teletype/telecommunication device for the
deaf) support can translate typed characters to voice. Voice can
also be translated into characters and displayed on the TTY. To attach
a TTY enabling you to communicate with parties also using a TTY
device, from Standby Mode, select MENU > Settings & Tools > Call
Settings > TTY Mode > "Enabling TTY will disable headset audio"
will appear on the display > OK and one of the following:
TTY Full — Turn on full TTY capability.
TTY + Talk — Turn on TTY in voice carry-over (VCO) mode.
TTY + Hear — Turn on TTY in hearing carry-over (HCO) mode.
TTY Off — Turn off TTY mode.
Scroll to desired choice and press OK to select.
HAC Mode
Whining or buzzing noise may occur when some wireless phones
are used near some hearing devices, such as hearing aids. To reduce
interference, from Standby Mode, select MENU > Settings & Tools >
Call Settings > HAC Mode, scroll to On and press OK to select.
One Touch Dial
To initiate a 1-touch dial call by entering the 1-touch dial digits,
from Standby Mode, select MENU > Settings & Tools > Call
Settings > One Touch Dial > On. If set to Off, a long press on the
1-touch dial numbers designated in your Contact List will not
function. Otherwise, you need to first press the 1-touch dial
numbers and press the Send key
. See "1-touch Dials," p. 49.
Voice Privacy
To protect the privacy of your phone conversation from other
callers placing phone calls on the same CDMA network (network
service), from Standby Mode, select MENU > Settings & Tools >
Call Settings > Voice Privacy press OK to turn On.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s
&
T o o l s
Touch Tones
Touch tones are sound designated to the keys on your phone keypad.
You can use touch tones for many automated dial-up services such
as banking and airlines or for entering your voicemail box number
and password.
To set the key tone length, from Standby Mode, select MENU >
Settings & Tools > Call Settings > DTMF Tones. Select Normal to send
out a tone for a fixed period of time no matter how long you press
the key or Long to send out a continuous tone for as long as you
keep the key pressed. Scroll to desired setting and press OK to set.
■ Memory
To monitor the amount of phone memory you are using for file
storage, from Standby Mode, select MENU > Settings & Tools >
Memory > Phone Memory.
Select from the following options:
Phone Memory Usage — To display the total used and available
memory (KB or MB, depends on the file size).
My Pictures — To display the size of each picture file in My Pictures.
My Sounds — To display the size of each sound file in My Sounds.
To delete a picture or sound file, highlight a file, press the Right
Soft key Options > Erase > scroll through list and mark selected
files to be deleted and press the Left Soft key Done when finished.
Press OK to erase the picture(s).
■ Phone Information
To view information about your phone, from Standby Mode, select
MENU > Settings & Tools > Phone Info. The following information
is shown:
My Number — The active phone number.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
S e t t i n g s
&
T o o l s
SW/HW Version — The current software and hardware version for
your phone.
Icon Glossary — The library of screen icons shown while on a call or
when using features.
Software Update — To check the status of your current software on
your phone, select Status. To check if there are new software
updates available for your phone, select Check New (This feature
will not work if you are in roaming or emergency mode).
■ Setup Assistant
To quickly set some phone settings, from Standby Mode, select
MENU > Settings & Tools > Setup Assistant and you may select
from the following:
Set Ringtone — To set ringtones for incoming calls.
Set Volume — To adjust the master volume of the phone by
pressing the Directional keys Up or Down.
Set Alerts — To set the alert type for an incoming text message,
picture message, voicemail, and emergency tone. See "Sounds
Settings," p. 66.
Set Wallpaper — To set wallpapers for the main or front screen.
For details, see "Wallpaper," p. 68.
Set Backlight — To set the backlight duration for the main display
and keypad. See "Backlight," p. 68.
Set Shortcuts — To set applications and shortcuts to your Up, Left
or Down Directional keys. See "Set Directional Keys," p. 70.
Set Clock Format — To set the clock format for the main or front
clock. See "Clock Format," p. 69.
Press the Left Soft key Done to return to the Settings & Tools menu.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
V o i c e c o m m a n d s
13. Voice commands
Voice commands transform your device into your own virtual
personal assistant, letting you use your voice to make phone calls,
look up contacts, and so on.
Before using voice services, note the following:
•
•
•
Voice commands are language-dependent. They are not
dependent on the speaker’s voice.
Voice commands are sensitive to background noise. Use them
in a quiet environment.
Very short names are not accepted. Use long names, and avoid
similar names for different numbers.
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should
not rely solely upon voice dialing in all circumstances.
■ Activate and use Voice Commands
To activate voice commands, from Standby Mode, select MENU >
Settings & Tools > Tools > Voice Commands, or press the Voice
Command key
(see "Phone at A Glance," p. 11). The following
options are displayed:
Call <Name> <Loc> — Say "Call" and then a name or a phone
number from your Contact List. For example, "Call Tom Smith",
"Call Tom Smith’s mobile", or "Call 617 515 212".
Send <Msg Type> — Say "Send Message" and you are asked for the
type of message. After choosing the message type, you are asked
for the contact name or number.
If you say a full-sentence command, such as "Send text to Tom",
you are asked to confirm the message and give the contact
number. The corresponding message editor opens.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
V o i c e c o m m a n d s
List (for example, "Lookup Tom") to retrieve and display information
of the contact.
Go To <Menu> — Say "Go To" to open the list of menu options on
your device and choose the menu you want. Or say a full command
with the application name (for example, "Go To Contacts").
Check <Item> — Say "Check" and you are asked for a list of items.
Or say "Check status" to hear all status information of your phone,
including phone status, voicemail, messages, number of missed
calls, time and date, battery level, signal strength, and volume.
My Verizon — Say "My Verizon" to access your Verizon Wireless
account information.
Help Guide — Say "Help Guide" to see instructions on how to use
these commands.
For detailed instructions on how to use each command, select the
command you want (except for Help Guide) and Info.
To adjust the settings of your voice commands, select Settings.
For details, see "Voice Command Settings," p. 71.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
E n h a n c e m e n t s
14. Enhancements
Warning: Use only batteries, chargers, and enhancements
approved for use with this particular model. The use of any
other types may invalidate any approval or warranty, and
may be dangerous.
For availability of approved enhancements, please check with your
dealer. When you disconnect the power cord of any enhancement,
grasp and pull the plug, not the cord.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
B a t t e r y a n d C h a r g e r I n f o r m a t i o n
15. Battery and Charger
Information
■ Battery Information
You device is powered by a rechargeable battery. The battery intended
for use with this device is BL-4B 700 mAh Li-Ion. This device is
intended for use when supplied with power from the following
chargers: AC-6U. The battery can be charged and discharged
hundreds of times, but it will eventually wear out. When the talk
and standby times are noticeably shorter than normal, replace the
battery. Use only approved batteries, and recharge your battery only
with approved chargers designated for this device. Use of an
unapproved battery or charger may present a risk of fire, explosion,
leakage, or other hazard.
If a battery is being used for the first time or if the battery has not
been used for a prolonged period, it may be necessary to connect
the charger, then disconnect and reconnect it to begin charging
the battery. If the battery is completely discharged, it may take
several minutes before the charging indicator appears on the
display or before any calls can be made.
Always turn the device off and disconnect the charger before
removing the battery.
Unplug the charger from the electrical plug and the device when
not in use. Do not leave a fully charged battery connected to a
charger, since overcharging may shorten its lifetime. If left unused,
a fully charged battery will lose its charge over time.
Always try to keep the battery between 15°C and 25°C (59°F and
77°F). Extreme temperatures reduce the capacity and lifetime of the
battery. A device with a hot or cold battery may not work temporarily.
Battery performance is particularly limited in temperatures well
below freezing.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
B a t t e r y a n d C h a r g e r I n f o r m a t i o n
Do not short-circuit the battery. Accidental short-circuiting can
occur when a metallic object such as a coin, clip, or pen causes
direct connection of the positive (+) and negative (-) terminals of
the battery. (These look like metal strips on the battery.) This might
happen, for example, when you carry a spare battery in your pocket
or purse. Short-circuiting the terminals may damage the battery or
the connecting object.
Do not dispose of batteries in a fire as they may explode. Batteries
may also explode if damaged. Dispose of batteries according to
local regulations. Please recycle when possible. Do not dispose as
household waste.
Do not dismantle, cut, open, crush, bend, deform, puncture, or
shred cells or batteries. In the event of a battery leak, do not allow
the liquid to come in contact with the skin or eyes. In the event of
such a leak, flush your skin or eyes immediately with water, or seek
medical help.
Do not modify, remanufacture, attempt to insert foreign objects
into the battery, or immerse or expose it to water or other liquids.
Improper battery use may result in a fire, explosion, or other
hazard. If the device or battery is dropped, especially on a hard
surface, and you believe the battery has been damaged, take it to a
service center for inspection before continuing to use it.
Use the battery only for its intended purpose. Never use any
charger or battery that is damaged. Keep your battery out of the
reach of small children.
■ Nokia Battery Authentication Guidelines
Always use original Nokia batteries for your safety. To check that
you are getting an original Nokia battery, purchase it from an
authorized Nokia dealer, and inspect the hologram label using the
following steps:
82
Download from Www.Somanuals.com. All Manuals Search And Download.
B a t t e r y a n d C h a r g e r I n f o r m a t i o n
Successful completion of the steps is not a total assurance of the
authenticity of the battery. If you have any reason to believe that
your battery is not an authentic original Nokia battery, you should
refrain from using it and take it to the nearest authorized Nokia
service point or dealer for assistance. Your authorized Nokia service
point or dealer will inspect the battery for authenticity. If authenticity
cannot be verified, return the battery to the place of purchase.
Authenticate Hologram
1. When you look at the hologram on the
label, you should see the Nokia connecting
hands symbol from one angle and the
Nokia Original Enhancements logo when
looking from another angle.
2. When you angle the hologram left,
right, down, and up, you should see 1, 2,
3 and 4 dots on each side respectively.
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the hologram
on the label is an authentic Nokia battery, please do not use the
battery. Take it to the nearest authorized Nokia service point or
dealer for assistance. The use of a battery that is not approved by the
manufacturer may be dangerous and may result in poor performance
and damage to your device and its enhancements. It may also
invalidate any approval or warranty applying to the device.
To find out more about original Nokia batteries, visit
83
Download from Www.Somanuals.com. All Manuals Search And Download.
C a r e a n d M a i n t e n a n c e
Care and Maintenance
Your device is a product of superior design and craftsmanship and
should be treated with care. The following suggestions will help
you protect your warranty coverage.
•
Keep the device dry. Precipitation, humidity and all types of
liquids or moisture can contain minerals that will corrode
electronic circuits. If your device does get wet, remove the
battery and allow the device to dry completely before replacing it.
•
•
Do not use or store the device in dusty, dirty areas. Its moving
parts and electronic components can be damaged.
Do not store the device in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries, and
warp or melt certain plastics.
•
Do not store the device in cold areas. When the device returns
to its normal temperature, moisture can form inside the device
and damage electronic circuit boards.
•
•
•
•
•
Do not attempt to open the device other than as instructed in
this guide.
Do not drop, knock, or shake the device. Rough handling can
break internal circuit boards and fine mechanics.
Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
Do not paint the device. Paint can clog the moving parts and
prevent proper operation.
Use a soft, clean, dry cloth to clean any lenses, such as camera,
proximity sensor, and light sensor lenses.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
C a r e a n d M a i n t e n a n c e
•
Use only the supplied or an approved replacement antenna.
Unauthorized antennas, modifications, or attachments could
damage the device and may violate regulations governing
radio devices.
•
•
Use chargers indoors.
Always create a backup of data you want to keep, such as
contacts and calendar notes.
•
To reset the device from time to time for optimum performance,
power off the device and remove the battery.
These suggestions apply equally to your device, battery, charger, or
any enhancement. If any device is not working properly, take it to
the nearest authorized service facility for service.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
A d d i t i o n a l S a f e t y I n f o r m a t i o n
Additional Safety Information
■ Small Children
Your device and its enhancements may contain small parts.
Keep them out of the reach of small children.
■ Operating Environment
This device meets RF exposure guidelines when used either in the
normal use position against the ear or when positioned at least 2.2
centimeters (7/8 inch) away from the body. When a carry case, belt
clip, or holder is used for body-worn operation, it should not contain
metal and should position the device the above-stated distance
from your body.
To transmit data files or messages, this device requires a quality
connection to the network. In some cases, transmission of data
files or messages may be delayed until such a connection is
available. Ensure the above separation distance instructions are
followed until the transmission is completed.
■ Medical Devices
Operation of any radio transmitting equipment, including wireless
phones, may interfere with the functionality of inadequately
protected medical devices. Consult a physician or the manufacturer
of the medical device to determine if they are adequately shielded
from external RF energy or if you have any questions. Turn off your
device in health care facilities when any regulations posted in these
areas instruct you to do so. Hospitals or health care facilities may
be using equipment that could be sensitive to external RF energy.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
A d d i t i o n a l S a f e t y I n f o r m a t i o n
Implanted medical devices
Manufacturers of medical devices recommend that a minimum
separation of 15.3 centimeters (6 inches) should be maintained
between a wireless device and an implanted medical device, such
as a pacemaker or implanted cardioverter defibrillator, to avoid
potential interference with the medical device. Persons who have
such devices should:
•
Always keep the wireless device more than 15.3 centimeters
(6 inches) from the medical device when the wireless device is
turned on.
•
•
Not carry the wireless device in a breast pocket.
Hold the wireless device to the ear opposite the medical device
to minimise the potential for interference.
•
•
Turn the wireless device off immediately if there is any reason
to suspect that interference is taking place.
Read and follow the directions from the manufacturer of their
implanted medical device.
If you have any questions about using your wireless device with an
implanted medical device, consult your health care provider.
Hearing aids
Some digital wireless devices may interfere with some hearing
aids. If interference occurs, consult your service provider.
Warning: For hearing aid compatibility, you must turn off
the Bluetooth connectivity.
Warning: Listen to music at a moderate level. Continuous
exposure to high volume may damage your hearing.
•
When using headphones, turn the volume down if you cannot
hear the people speaking near you or if the person sitting next
to you can hear what you are listening to.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
A d d i t i o n a l S a f e t y I n f o r m a t i o n
•
•
Do not turn the volume up to block out noisy surroundings.
Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech or experience
any temporary hearing difficulty after listening to your portable
audio device, discontinue use and consult your doctor.
■ Vehicles
RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles such as electronic fuel injection
systems, electronic antiskid (antilock) braking systems, electronic
speed control systems, and air bag systems. For more information,
check with the manufacturer, or its representative, of your vehicle
or any equipment that has been added.
Only qualified personnel should service the device, or install the
device in a vehicle. Faulty installation or service may be dangerous
and may invalidate any warranty that may apply to the device.
Check regularly that all wireless device equipment in your vehicle
is mounted and operating properly. Do not store or carry flammable
liquids, gases, or explosive materials in the same compartment as
the device, its parts, or enhancements. For vehicles equipped with
an air bag, remember that air bags inflate with great force. Do not
place objects, including installed or portable wireless equipment in
the area over the air bag or in the air bag deployment area. If in-
vehicle wireless equipment is improperly installed and the air bag
inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Turn off
your device before boarding an aircraft. The use of wireless
teledevices in an aircraft may be dangerous to the operation of
the aircraft, disrupt the wireless telephone network, and may
be illegal.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
A d d i t i o n a l S a f e t y I n f o r m a t i o n
■ Potentially Explosive Environments
Turn off your device when in any area with a potentially explosive
atmosphere, and obey all signs and instructions. Potentially
explosive atmospheres include areas where you would normally be
advised to turn off your vehicle engine. Sparks in such areas could
cause an explosion or fire resulting in bodily injury or even death.
Turn off the device at refuelling points such as near gas pumps at
service stations. Observe restrictions on the use of radio equipment
in fuel depots, storage, and distribution areas; chemical plants; or
where blasting operations are in progress. Areas with a potentially
explosive atmosphere are often, but not always, clearly marked.
They include below deck on boats, chemical transfer or storage
facilities and areas where the air contains chemicals or particles
such as grain, dust, or metal powders. You should check with the
manufacturers of vehicles using liquefied petroleum gas (such as
propane or butane) to determine if this device can be safely used in
their vicinity.
■ Emergency Calls
Important: This device operates using radio signals, wireless
networks, landline networks, and user-programmed
functions. If your device supports voice calls over the
internet (internet calls), activate both the internet calls
and the cellular phone. The device will attempt to make
emergency calls over both the cellular networks and
through your internet call provider if both are activated.
Connections in all conditions cannot be guaranteed. You
should never rely solely on any wireless device for essential
communications like medical emergencies.
To make an emergency call:
1. If the device is not on, power it on. Check for adequate
signal strength.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
A d d i t i o n a l S a f e t y I n f o r m a t i o n
2. Press the End key
as many times as needed to clear the
display and ready the device for calls.
3. Enter the official emergency number for your present location.
4. Press the Send key
.
If certain features are in use, you may first need to turn those
features off before you can make an emergency call. Consult this
guide or your service provider for more information. When making
an emergency call, give all the necessary information as accurately
as possible. Your wireless device may be the only means of
communication at the scene of an accident. Do not end the call
until given permission to do so.
■ Certification Information (SAR)
This mobile device meets guidelines for exposure to radio waves.
Your mobile device is a radio transmitter and receiver. It is designed
not to exceed the limits for exposure to radio waves recommended
by international guidelines. These guidelines were developed by
the independent scientific organization ICNIRP and include safety
margins designed to assure the protection of all persons, regardless
of age and health.
The exposure guidelines for mobile devices employ a unit of
measurement known as the Specific Absorption Rate or SAR.
The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram
(W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted
using standard operating positions with the device transmitting at
its highest certified power level in all tested frequency bands. The
actual SAR level of an operating device can be below the maximum
value because the device is designed to use only the power required
to reach the network. That amount changes depending on a number
of factors such as how close you are to a network base station.
The highest SAR value under the ICNIRP guidelines for use of the
device at the ear is 0.68 W/kg.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
A d d i t i o n a l S a f e t y I n f o r m a t i o n
Use of device accessories and enhancements may result in different
SAR values. SAR values may vary depending on national reporting
and testing requirements and the network band. Additional SAR
information may be provided under product information at
www.nokia.com.
Your mobile device is also designed to meet the requirements for
exposure to radio waves established by the Federal Communications
Commission (USA) and Industry Canada. These requirements set a
SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest
SAR value reported under this standard during product certification
for use at the ear is 1.12 W/kg and when properly worn on the body
is 0.69 W/kg.
■ Hearing Aid Compatibility (HAC)
Warning: For hearing aid compatibility, you must turn off
the Bluetooth connectivity.
Your mobile device model complies with FCC rules governing hearing
aid compatibility. These rules require an M3 microphone or higher
value. The M-value, shown on the device box, refers to lower radio
frequency (RF) emissions. A higher M-value generally indicates
that a device model has a lower RF emissions level, which may
improve the likelihood that the device will operate with certain
hearing aids. Some hearing aids are more immune than others to
interference. Please consult your hearing health professional to
determine the M-rating of your hearing aid and whether your
hearing aid will work with this device. More information on
91
Download from Www.Somanuals.com. All Manuals Search And Download.
A d d i t i o n a l S a f e t y I n f o r m a t i o n
■ Technical Information
Type designation — RM-339
Dimensions — Width, 42mm; length, 82mm; depth, 16mm
Weight — 65.6 g with 700 mAh Li-Ion battery (BL-4B) excluding
battery deck
Main Display — 1.77"-in 128x160 pixels, 262,000 colors
Front Display — 1.2"-in 128x128 pixels, 65,000 colors
Camera — Integrated 0.3 Mpixels VGA camera with digital zoom
Wireless networks — CDMA 800 and 1900 MHz, and
CDMA2000 1xRTT
Frequency range (Tx) — PCS: 1851.25-1908.75 MHz;
cellular: 824.70-848.31 MHz
Frequency range (Rx) — PCS: 1931.25-1988.75 MHz;
cellular: 869.70-893.31 MHz
GPS frequency — 1575.42 MHz
Bluetooth frequency range — 2.402-2.48 GHz
■ Battery Information
This section provides information about battery charging times with
the AC-6U travel charger, and talk and standby times. Be aware that
the information in this section is subject to change. For more
information, contact your service provider.
Important: Battery talk and standby times are estimates
only and depend on signal strength, network conditions,
features used, battery age and condition, temperatures to
which battery is exposed, use in digital mode, and many
other factors. The amount of time a device is used for calls
will affect its standby time. Likewise, the amount of time
that the device is turned on and in the Standby Mode will
affect its talk time.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
A d d i t i o n a l S a f e t y I n f o r m a t i o n
Charging times
The following charging times are approximate:
Charger options
AC-6U
BL-4B 700 mAh Li-lon battery
Up to 2 hours 10 minutes
Talk and standby times
Operation times are estimates only and depend on signal strength,
device use, network conditions, features used, battery age and
condition (including charging habits), temperatures to which the
battery is exposed, and many other factors.
Function
Digital
Talk time
Up to 3 hours 30 minutes
Up to 240 hours
Standby time
93
Download from Www.Somanuals.com. All Manuals Search And Download.
I n d e x
Index
billing 10
Bluetooth connecting 64
NUMERICS
123 mode 28
2-Sec pause 45
C
calculator 59
calendar 60
A
ABC mode 28
call settings
answer options 74
auto retry 74
DTMF tones 76
one touch dial 75
TTY mode 75
voice privacy 75
call timers 56
callback number 42
caller
Abc mode 28
about your phone 7
accessibility 9
Airplane Mode 69
alarm clock 62
alerts 38
answer options 74
antenna 17
application memory 32
group 48
ID 24
calls
B
back cover
removing 17
replacing 18
backlight 68
banner 67
answering 24
duration of 56
headset 24
in-call options 25
making 23
missed 56
muting 26
pauses when making 45
silencing 24
vibrate mode 25
battery 81
chargers 81
charging 19
charging times 93
removing 18
replacing 18
talk and standby times 93
94
Download from Www.Somanuals.com. All Manuals Search And Download.
I n d e x
camera 30
care and maintenance 84
mobile web 32
pictures 31
certification information (SAR) 91 drafts 41
charger 81 DTMF tones 76
charging times 93
connecting 19
clock 69
contact
information 10
duration of calls 56
E
E911 only 72
e-mail 53
emergency calls 33
location sharing 72
while using wireless
internet 33
list 46
Contacts
default number 45
new 44
numbers with pauses 45
content memory 32
copyright protection 35
customer service 10
EMS 34
enhanced roaming indicator 67
enhancements 80
entry mode 27
ERI 67
event scheduler 60
D
default number
callback 42
F
contacts 45
FCC information 90
font size 69
device information 76
dimensions 92
Directional key 15, 70
display
G
games 31
groups 48
backlight 68
banner 67
font size 69
themes 68
wallpaper 68
downloading
extras 32
H
headset
calling 24
connecting 22
hearing aids 87
help 9, 32
games 31
information 32
95
Download from Www.Somanuals.com. All Manuals Search And Download.
I n d e x
MMS 35
I
mute function 26
My Ringtones 29
My Verizon 59
inbox 38
indicators and icons 13, 77
instant messaging 54
N
L
NAM selection 74
network
language 72
location sharing 72
service 8
settings 69
Nokia support 10
notepad 63
M
main clock 69
MEDIA CENTER 29
medical devices, hearing aids 87
MEID 9
number mode 28
O
memory information 32, 76
menu settings 69
messages
one touch dialing 75
online album 30
characters 37
chatting 43
composing 34, 36
draft 41
P
pauses 45
phone
settings 69
picture
e-mail 53
EMS 34
inbox 38
MMS 35
ID 46
taking 30
picture messages 34
settings 41
preview 37
priority level 36
options 38
Quick Text 42
replying 39
SMS 34
text 34
voicemail 42
Messaging
Q
Quick Text 40, 42
segments 34
settings 41
96
Download from Www.Somanuals.com. All Manuals Search And Download.
system
device information 76
R
Recent Calls 56
ringtones 29, 55
language 72
NAM selection 74
selecting 73
S
safety 6, 86
T
security 72
security and functionality 33
settings
talk and standby times 93
technical information 92
text entry 27
Bluetooth 64
Abc mode 28
abc mode 28
Contact List 47
ICE contacts 51
inbox 38
entry mode 27
number mode 28
word mode 27
text messages 35
themes 68
phone 69
picture message 30, 37
sent message 40
sounds 66
timers 56
tools
text message 36
Settings & Tools 59
shortcuts 15
signature 42
silent mode 25
SMS 34
alarm clock 62
calculator 59
calendar 60
notepad 63
stopwatch 62
software version 77
sounds
voice commands 59
world clock 63
TTY mode 75
Tunes & Tones 29
turning the phone on and off 22
TXT message
characters 34
writing and sending 35
type designation 92
alert 66
picture message 37
settings 66
speakerphone 23
speed dials 23, 49
standard mode 28
stopwatch 62
symbols mode 28
97
Download from Www.Somanuals.com. All Manuals Search And Download.
I n d e x
V
W
vibrate mode 25
voice commands 78
voice privacy 75
voicemail 42
wallpaper 68
WAP 8, 38
wireless
internet 33
volume
networks 92
adjusting 24, 66
earpiece 24
VZ Navigator 58
world clock 63
wrist strap 19
writing and sending messages 35
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
100
Download from Www.Somanuals.com. All Manuals Search And Download.
|