Nokia Cell Phone 002P132 User Manual

Nokia X6-00 User guide  
Issue 5.3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Safety  
Safety  
Read these simple guidelines. Not following them may be dangerous or illegal. Read  
the complete user guide for further information.  
SWITCH ON SAFELY  
Do not switch the device on when wireless phone use is prohibited or  
when it may cause interference or danger.  
ROAD SAFETY COMES FIRST  
Obey all local laws. Always keep your hands free to operate the vehicle  
while driving. Your first consideration while driving should be road  
safety.  
INTERFERENCE  
All wireless devices may be susceptible to interference, which could affect  
performance.  
SWITCH OFF IN RESTRICTED AREAS  
Follow any restrictions. Switch the device off in aircraft, near medical  
equipment, fuel, chemicals, or blasting areas.  
QUALIFIED SERVICE  
Only qualified personnel may install or repair this product.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Safety  
7
ACCESSORIES AND BATTERIES  
Use only approved accessories and batteries. Do not connect  
incompatible products.  
WATER-RESISTANCE  
Your device is not water-resistant. Keep it dry.  
GLASS PARTS  
The front cover of the device is made of glass. This glass can break if the  
device is dropped on a hard surface or receives a substantial impact. If  
the glass breaks, do not touch the glass parts of the device or attempt to  
remove the broken glass from the device. Stop using the device until the  
glass is replaced by qualified service personnel.  
About your device  
The wireless device described in this guide is approved for use on the UMTS 900,  
1900, 2100 networks and GSM 850, 900, 1800, 1900 networks. Contact your service  
provider for more information about networks.  
Your device supports several connectivity methods and like computers may be  
exposed to viruses and other harmful content. Exercise caution with messages,  
connectivity requests, browsing, and downloads. Only install and use services and  
software from trustworthy sources that offer adequate security and protection,  
such as applications that are Symbian Signed or have passed the Java Verified™  
testing. Consider installing antivirus and other security software on your device and  
any connected computer.  
Your device may have preinstalled bookmarks and links for third-party internet sites  
and may allow you to access third-party sites. These are not affiliated with Nokia,  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
8
Safety  
and Nokia does not endorse or assume liability for them. If you access such sites,  
take precautions for security or content.  
Warning:  
To use any features in this device, other than the alarm clock, the device must be  
switched on. Do not switch the device on when wireless device use may cause  
interference or danger.  
When using this device, obey all laws and respect local customs, privacy and  
legitimate rights of others, including copyrights. Copyright protection may prevent  
some images, music, and other content from being copied, modified, or transferred.  
Make back-up copies or keep a written record of all important information stored  
in your device.  
When connecting to any other device, read its user guide for detailed safety  
instructions. Do not connect incompatible products.  
The images in this guide may differ from your device display.  
Refer to the user guide for other important information about your device.  
Network services  
To use the device you must have service from a wireless service provider. Some  
features are not available on all networks; other features may require that you make  
specific arrangements with your service provider to use them. Network services  
involve transmission of data. Check with your service provider for details about fees  
in your home network and when roaming on other networks. Your service provider  
canexplain whatcharges will apply. Some networksmayhave limitationsthataffect  
how you can use some features of this device requiring network support such as  
support for specific technologies like WAP 2.0 protocols (HTTP and SSL) that run on  
TCP/IP protocols and language-dependent characters.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Safety  
9
Your service provider may have requested that certain features be disabled or not  
activated in your device. If so, these features will not appear on your device menu.  
Your device may also have customized items such as menu names, menu order, and  
icons.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10 Get started  
Get started  
Keys and parts  
1 – Earpiece  
2 – Touch screen  
3 – Menu key  
4 – Call key  
5 – Light sensor  
6 – Secondary camera  
7 – Media key  
8 – Proximity sensor  
9 – End key  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Get started 11  
10 – Power key  
11 – Charger connector  
12 – Nokia AV Connector (3.5 mm)  
13 – Micro USB connector  
14 – Volume/Zoom key  
15 – Camera lens  
16 – Lock switch  
17 – Capture key  
18 – Microphone  
19 – Camera flash  
20 – Loudspeakers  
21 – SIM card slot cover  
During extended operation such as an active video call and high speed data  
connection, the device may feel warm. In most cases, this condition is normal. If  
you suspect the device is not working properly, take it to the nearest authorised  
service facility.  
Do not cover the area above the touch screen, for example, with protective film or  
tape.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12 Get started  
Insert the SIM card and battery  
Insert the SIM card  
Important: To prevent damage to the SIM card, always remove the battery  
before you insert or remove the card.  
Important: Do not use a mini-UICC SIM card, also known as a micro-SIM card,  
a micro-SIM card with an adapter, or a SIM card that has a mini-UICC cutout (see  
figure) in this device. A micro SIM card is smaller than the standard SIM card. This  
device does not support the use of micro-SIM cards and use of incompatible SIM  
cards may damage the card or the device, and may corrupt data stored on the card.  
1
2
Remove the back cover.  
If the battery is inserted, remove the battery.  
Always switch the device off and disconnect the charger before removing the  
battery.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Get started 13  
3
4
Open the cover of the SIM card slot.  
Insert a SIM card in the slot. Ensure that the contact area on the card is facing  
up and the bevelled corner is facing toward the device. Push the card in.  
5
Close the cover of the SIM card slot. Ensure that the cover is properly closed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14 Get started  
If the SIM card is not properly in place, the device can only be used in the offline  
profile.  
Insert the battery  
1
Insert the battery.  
2
To replace the cover, direct the top locking catches toward their slots. First,  
press the cover down in the middle, so that the middle catches lock into place.  
When the locking catches in the middle are in place, press the cover down at  
the bottom of the device.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Get started 15  
Charge the battery  
Your battery has been partially charged at the factory. If the device indicates a low  
charge, do the following:  
1
2
Connect the charger to a wall outlet.  
Connect the charger to the device.  
3
When the device indicates a full charge, disconnect the charger from the device,  
then from the wall outlet.  
You do not need to charge the battery for a specific length of time, and you can use  
the device while it is charging. If the battery is completely discharged, it may take  
several minutes before the charging indicator appears on the display or before any  
calls can be made.  
Tip: Disconnect the charger from the wall outlet when the charger is not in use. A  
charger that is connected to the outlet consumes power even when it is not  
connected to the device.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
16 Get started  
Switch the device on  
1
2
Press and hold the power key.  
If the device asks for a PIN code or lock code, enter it, and select OK. To delete  
a number, select  
. The factory setting for the lock code is 12345.  
3
4
Select your location. If you accidentally select the wrong location, select Back.  
Enter the date and time. When using the 12-hour time format, to switch  
between a.m. and p.m., select any number.  
Lock the keys and touch screen  
To lock or unlock the touch screen and the keys, slide the lock switch on the side of  
the device.  
When the touch screen and keys are locked, the touch screen is switched off and  
the keys are inactive.  
The screen and keys may be locked automatically after a period of inactivity.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Get started 17  
To change settings for automatic screen and key locking, select Menu >Settings  
and Phone >Phone mgmt. >Auto. keyguard >Keypad autolock period.  
Home screen  
The home screen is your starting point where you can collect all your important  
contacts or application shortcuts.  
Interactive display elements  
To open the clock application, select the clock (1).  
To open the calendar, or to change the profile, select the date or the profile name  
(2).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
18 Get started  
To view or modify connectivity settings ( ), to view the available wireless LANs  
(WLAN) if WLAN scanning is enabled, or to view missed events, select the top right  
corner (3).  
To make a phone call, select Telephone or  
(4).  
(5).  
To open the contacts list, select Contacts or  
To open the main menu, press the menu key (6).  
Start using the contacts bar  
To start using the contacts bar, and to add your contacts to the home screen, select  
>Options >New contact, and follow the instructions.  
Change the home screen theme  
To change the home screen theme or the shortcuts, select Menu >Settings and  
Personal >Home screen.  
Music keys  
When music or the radio is playing in the background, music keys (play/pause, skip  
backward, and skip forward) are displayed in the home screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Get started 19  
Media key  
To access applications such as the music player or browser, select the media key  
) to open the media bar, and select the application.  
(
Tip: Hold your finger on the icon to see the name of the application. To open the  
application, raise your finger. Otherwise, slide your finger away from the icon.  
Access the menu  
To access the menu, press the menu key.  
To open an application or a folder in the menu, select the item.  
Touch screen actions  
Tap and double-tap  
To open an application or other element on the touch screen, you normally tap it  
with your finger. However, to open the following items, you must tap them twice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
20 Get started  
List items in an application, such as the Drafts folder in the folder list in  
Messaging  
Tip: When you open a list view, the first item is already highlighted. To open  
the highlighted item, tap it once.  
Applications and folders in the menu when using the list view type  
Files in a file list, for example, an image in the images and videos view in Gallery.  
If you tap a file or similar item once, it is not opened, it becomes highlighted.  
To view the options available for the item, select Options or, if available, select  
an icon from a toolbar.  
Select  
In this user documentation, opening applications or items by tapping them once or  
twice is called "selecting". If you need to select several items in a sequence, the  
display texts to select are separated by arrows.  
Example: To select Options >Help, tap Options, and then tap Help.  
Drag  
To drag, place your finger on the screen, and slide it across the screen.  
Example: To scroll up or down on a web page, drag the page with your finger.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Get started 21  
Swipe  
To swipe, slide your finger quickly left or right on the screen.  
Example: When viewing an image, to view the next or previous image, swipe the  
image left or right, respectively.  
Tip: When the touch screen is locked, to answer a call, or to stop a clock or calendar  
alarm, swipe the screen. Follow the visual cues.  
Scroll  
To scroll up or down in lists that have a scroll bar, drag the slider of the scroll bar.  
To scroll longer lists, flick the list. The faster you flick, the faster the list moves. If  
you flick up, the list continues the movement and moves down.  
To select an item from a spinning list and to stop the movement, tap the item.  
Tip: To view a brief description of an icon, place your finger on the icon. Descriptions  
are not available for all icons.  
Touch screen light  
The touch screen light is turned off after a period of inactivity.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22 Get started  
To turn the screen light on, tap it.  
If the touch screen and keys are locked, tapping the screen does not turn the screen  
light on. To unlock the screen and keys, slide the lock switch.  
Change the ringing tone  
Select Menu >Settings and Personal >Profiles.  
You can use profiles to set and customise the ringing tones, message alert tones,  
and other tones for different events, environments, or caller groups.  
To personalise a profile, scroll to the profile, and select Options >Personalise.  
Support  
When you want to learn more about how to use your product or you are unsure  
how your device should function, go to www.nokia.com/support, or using a mobile  
device, nokia.mobi/support. You can also select Menu >Help in your device.  
If this does not resolve your issue, do one of the following:  
Reboot your device. Switch off the device, and remove the battery. After about  
a minute, replace the battery, and switch on the device.  
Restore the original factory settings.  
Update your device software.  
If your issue remains unsolved, contact Nokia for repair options. Go to  
www.nokia.com/repair. Before sending your device for repair, always back up the  
data in your device.  
Ovi by Nokia  
With Ovi by Nokia, you can find new places and services, and stay in touch  
with your friends. You can do, for example, the following:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Find help 23  
Download games, applications, videos, and ringtones to your device  
Find your way withfree walk and drive navigation, plantrips, and view locations  
on a map  
Get a free Ovi Mail account  
Get music  
Some items are free of charge, others you may need to pay for.  
The available services may also vary by country or region, and not all languages are  
supported.  
To access Nokia's Ovi services, go to www.ovi.com, and register your own Nokia  
account.  
For more information, go to the support section at www.ovi.com.  
About Ovi Store  
In Ovi Store, you can download mobile games, applications, videos, images,  
themes, and ringing tones to your device. Some items are free of charge; others you  
need to pay for with your credit card or in your phone bill. The availability of  
payment methods depends on your country of residence and your network service  
provider. Ovi Store offers content that is compatible with your mobile device and  
relevant to your tastes and location.  
Find help  
In-device help  
Your device contains instructions to help to use the applications in your device.  
To open help texts from the main menu, select Menu >Help and the application  
for which you want to read instructions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
24 Find help  
When an application is open, to access the help text for the current view, select  
Options >Help.  
When you are reading the instructions, to change the size of the help text, select  
Options >Decrease font size or Increase font size.  
You may find links to related topics at the end of the help text.  
If you select an underlined word, a short explanation is displayed.  
Help texts use the following indicators:  
Link to a related help topic.  
Link to the application being discussed.  
When you are reading the instructions, to switch between help texts and the  
application that is open in the background, select Options >Show open apps. and  
the desired application.  
Update software using your PC  
Nokia Software Updater is a PC application that enables you to update your device  
software. To update your device software, you need a compatible PC, broadband  
internet access, and a compatible USB data cable to connect your device to the PC.  
To get more information and to download the Nokia Software Updater application,  
Settings  
Your device normally has MMS, GPRS, streaming, and mobile internet settings  
automatically configured in the device, based on your network service provider  
information. You may have settings from your service providers already installed in  
your device, or you may receive or request the settings from the network service  
providers as a special message.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Find help 25  
Access codes  
PIN or PIN2 code  
(4-8 digits)  
These protect your SIM card against unauthorised use or are  
required to access some features.  
You can set your device to ask for the PIN code when you  
switch it on.  
If not supplied with your SIM card or you forget the codes,  
contact your service provider.  
If you enter the code incorrectly three times in a row, you  
need to unblock the code with the PUK or PUK2 code.  
PUK or PUK2 code These are required to unblock a PIN or PIN2 code.  
(8 digits)  
If not supplied with your SIM card, contact your service  
provider.  
IMEI number  
(15 digits)  
This is used to identify valid devices in the network. The  
number can also be used to block, for example, stolen  
devices.  
To view your IMEI number, dial *#06#.  
Lock code (security This protects your device against unauthorised use.  
code)  
You can set your device to ask for the lock code that you  
(min. 4 digits or  
define.  
characters)  
Keep the code secret and in a safe place, separate from your  
device.  
If you forget the code and your device is locked, your device  
will require service. Additional charges may apply, and all the  
personal data in your device may be deleted.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
26 Find help  
For more information, contact a Nokia Care Point or your  
device dealer.  
Prolong battery life  
Many features in your device increase the demand on battery power and reduce the  
battery lifetime. To save battery power, note the following:  
Features that use Bluetooth technology, or allowing such features to run in the  
background while using other features, increase the demand on battery power.  
Turn Bluetooth technology off when you do not need it.  
Features that use wireless LAN (WLAN), or allowing such features to run in the  
background while using other features, increase the demand on battery power.  
WLAN on your Nokia device switches off when you are not trying to connect,  
not connected to an access point, or not scanning for available networks. To  
further reduce battery consumption, you can specify that your device does not  
scan, or scans less often, for available networks in the background.  
If you have set Packet data connection to When available in connection  
settings, and there is no packet data coverage (GPRS), the device periodically  
tries to establish a packet data connection. To prolong the operating time of  
your device, select Packet data connection >When needed.  
The Maps application downloads new map information when you move to new  
areas on the map, which increases the demand on battery power. You can  
prevent the automatic download of new maps.  
If the signal strength of the cellular network varies much in your area, your  
device must scan for the available network repeatedly. This increases the  
demand on battery power.  
If the network mode is set to dual mode in the network settings, the device  
searches for the UMTS network. You can set the device to use only the GSM  
network. To only use the GSM network, select Menu >Settings and  
Connectivity >Network >Network mode >GSM.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Find help 27  
The backlight of the display increases the demand on battery power. In the  
display settings, you can change the time-out after which the backlight is  
switched off, and adjust the light sensor that observes lighting conditions and  
adjusts the display brightness. Select Menu >Settings and Phone >Display >  
Light time-out or Light sensor.  
Leaving applications running in the background increases the demand on  
battery power. To close the applications you do not use, press and hold the  
menu key, select Options >Show open apps., and navigate to the application  
with the menu key. Press and hold the menu key, and select Exit.  
Increase available memory  
Do you need more available device memory for new applications and content?  
View how much space is available for different data types  
Select Menu >Applications >Office >File mgr..  
Many features of the device use memory to store data. The device notifies you if the  
memory in different memory locations is low.  
Increase available memory  
Transfer data to the mass memory or to a compatible computer.  
To remove data you no longer need, use File manager or open the respective  
application. You can remove the following:  
Messages in the folders in Messaging and retrieved e-mail messages in the  
mailbox  
Saved web pages  
Contact information  
Calendar notes  
Applications shown in Application manager that you do not need  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
28 Your device  
Installation files (.sis or .sisx) of applications you have installed. Transfer the  
installation files to a compatible computer.  
Images and video clips in Gallery. Back up the files to a compatible computer.  
Your device  
Phone setup  
When you switch on your device for the first time, the Phone setup application  
opens.  
To access the Phone setup application later, select Menu >Applications >Phone  
setup.  
To set up the device connections, select Sett. wizard.  
To transfer data to your device from a compatible Nokia device, select Switch.  
The available options may vary.  
Transfer content for the first time  
1
2
Select Menu >Applications >Phone switch.  
Select the connection type you want to use to transfer the data, and connect  
the devices. Both devices must support the selected connection type.  
If you select Bluetooth connectivity as the connection type, you may need to  
pair the devices.  
3
On your device, select the content you want to transfer from the other device.  
When the transfer has started, you can cancel it and continue later.  
Content is transferred from the memory of the other device to the corresponding  
location in your device. The transfer time depends on the amount of data to be  
transferred.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Your device 29  
Display indicators  
The device is being used in a GSM network (network service).  
The device is being used in a UMTS network (network service).  
You have one or more unread messages in the Inbox folder in Messaging.  
You have received new e-mail in the remote mailbox.  
There are messages waiting to be sent in the Outbox folder.  
You have missed calls.  
The ringing type is set to Silent, and the message and e-mail alert tones are  
turned off.  
A timed profile is active.  
The touch screen and keys are locked.  
A clock alarm is active.  
The second phone line is being used (network service).  
All calls to the device are diverted to another number (network service). If  
you have two phone lines, a number indicates the active line.  
A compatible headset is connected to the device.  
A compatible TV out cable is connected to the device.  
A compatible text phone is connected to the device.  
A data call is active (network service).  
A GPRS packet data connection is active (network service). indicates that  
the connection is on hold and that a connection is available.  
A packet data connection is active in a part of the network that supports  
EGPRS (network service). indicates that the connection is on hold and  
that a connection is available. The icons indicate that EGPRS is available in  
the network, but your device is not necessarily using an EGPRS connection  
to transfer data.  
A UMTS packet data connection is active (network service). indicates that  
the connection is suspended and that a connection is being established.  
High-speed downlink packet access (HSDPA) is supported and active  
(network service). indicates that the connection is suspended and that  
a connection is being established.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
30 Your device  
You have set the device to scan for wireless LANs, and a wireless LAN is  
available (network service).  
A wireless LAN connection is active in a network that uses encryption.  
A wireless LAN connection is active in a network that does not use  
encryption.  
Bluetooth connectivity is activated.  
Data is being transmitted using Bluetooth connectivity. When the indicator  
is blinking, your device is trying to connect with another device.  
A USB connection is active.  
Synchronisation is in progress.  
GPS is active.  
Volume and loudspeaker control  
Adjust the volume of a phone call or sound clip  
Use the volume keys.  
The built-in loudspeaker allows you to speak and listen from a short distance  
without having to hold the device to your ear.  
Use the loudspeaker during a call  
Select Activate loudsp..  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Your device 31  
Turn off the loudspeaker  
Select Activate handset.  
Warning:  
Continuous exposure to high volume may damage your hearing. Listen to music at  
a moderate level, and do not hold the device near your ear when the loudspeaker  
is in use.  
Shortcuts  
To switch between open applications, press and hold the menu key.  
Leaving applications running in the background increases the demand on battery  
power and reduces the battery life.  
To start a web connection (network service), in the dialler, tap and hold 0.  
To access applications available in the media bar, such as the music player and web  
browser, in any view, press the media key.  
To change the profile, press the power key, and select a profile.  
To call your voice mailbox (network service), in the dialler, tap and hold 1.  
To open a list of last dialled numbers, in the home screen, press the call key.  
To use voice commands, in the home screen, press and hold the call key.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
32 Your device  
Antenna locations  
Your device may have internal and external antennas. Avoid touching the antenna  
area unnecessarily while the antenna is transmitting or receiving. Contact with  
antennas affects the communication quality and may cause a higher power level  
during operation and may reduce the battery life.  
Bluetooth and WLAN  
antenna  
GPS antenna  
Cellular antenna  
Contacts bar  
To startusingthe contactsbar and add yourcontactsto the home screen, select  
>
Options >New contact, and follow the instructions.  
To communicate with your contact, select the contact and from the following:  
— Make a phone call.  
— Send a message.  
— Add a feed.  
— Refresh feeds.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Your device 33  
To view the latest call event and other past communication events with a contact,  
select a contact. To call the contact, select the call event. To view details of other  
events, select a communication event.  
To close the view, select  
.
Offline profile  
The offline profile lets you use the device without connecting to the wireless cellular  
network. When the offline profile is active, you can use your device without a SIM  
card.  
Activate the offline profile  
Press the power key briefly, and select Offline.  
When you activate the offline profile, the connection to the cellular network is  
closed. All radio frequency signals to and from the device to the cellular network  
are prevented. If you try to send messages using the cellular network, they are  
placed in the Outbox folder to be sent later.  
Important: In the Offline profile you cannot make or receive any calls, or use  
other features that require cellular network coverage. Calls may still be possible to  
the official emergency number programmed into your device. To make calls, you  
must first activate the phone function by changing profiles. If the device has been  
locked, enter the lock code.  
When you have activated the offline profile, you can still use a wireless LAN (WLAN),  
for example, to read your e-mail or browse on the internet. You can also use  
Bluetooth connectivity while in the offline profile. Remember to comply with any  
applicable safety requirements when establishing and using WLAN or Bluetooth  
connections.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
34 Your device  
Sensor settings and display rotation  
When you activate the sensors in your device, you can control certain functions by  
turning the device.  
Select Menu >Settings and Phone >Sensor settings.  
Select from the following:  
Sensors — Activate the sensors.  
Turning control — Select Silencing calls and Snoozing alarms to mute calls and  
snooze alarms by turning your device so that the display faces down. Select Auto-  
rotate display to rotate the display content automatically when you turn the device  
on its left side or back to a vertical position. Some applications and features may  
not support rotating the display content.  
Headset  
You can connect a compatible headset or compatible headphones to your device.  
You may need to select the cable mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Your device 35  
Warning:  
When you use the headset, your ability to hear outside sounds may be affected. Do  
not use the headset where it can endanger your safety.  
Do not connect products that create an output signal as this may cause damage to  
the device. Do not connect any voltage source to the Nokia AV Connector.  
When connecting any external device or any headset, other than those approved  
by Nokia for use with this device, to the Nokia AV Connector, pay special attention  
to volume levels.  
Remove the SIM card  
1
2
Remove the back cover by lifting it from the bottom end of the device.  
Remove the battery.  
3
4
Open the cover of the SIM card slot. In the opening under the battery, push the  
lip sideways to slide the SIM card out of the slot. Pull the SIM card out.  
Replace the battery and back cover.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
36 Make calls  
Attach a wrist strap  
Remote lock  
You can lock your device remotely using a predefined text message.  
Enable remote locking  
1
2
Select Menu >Settings and Phone >Phone mgmt. >Security >Phone and  
SIM card >Remote phone locking >Enabled.  
Enter the text message content (5-20 characters), verify it, and enter the lock  
code.  
Lock your device remotely  
Write the predefined text message, and send it to your device. To unlock your device,  
you need the lock code.  
Make calls  
Touch screen during calls  
Your device has a proximity sensor. To extend battery life and prevent accidental  
selections, the touch screen is disabled automatically during calls, when you place  
the device next to your ear.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Make calls 37  
Do not cover the proximity sensor, for example, with protective film or tape.  
Voice calls  
1
In the home screen, select Telephone to open the dialler, and enter the phone  
number, including the area code. To remove a number, select C.  
For international calls, select * twice for the + character (which replaces the  
international access code), and enter the country code, area code (omit the  
leading zero if necessary), and phone number.  
2
3
To make the call, press the call key.  
To end the call (or to cancel the call attempt), press the end key.  
Pressing the end key always ends a call, even if another application is active.  
To make a call from the contacts list, select Menu >Contacts.  
Go to the desired name. Or, select the search field, enter the first letters or characters  
of the name, and go to the name.  
To call the contact, press the call key. If youhavesaved several numbersfor acontact,  
select the desired number from the list, and press the call key.  
During a call  
Mute or unmute the microphone  
Select  
or  
.
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
38 Make calls  
Put an active voice call on hold  
Select  
or  
.
Activate the loudspeaker  
Select  
. If you have attached a compatible headset with Bluetooth connectivity,  
to route the sound to the headset, select Options >Activate BT handsfree.  
Switch back to the handset  
Select  
.
End a call  
Select  
.
Switch between active and held calls  
Select Options >Swap.  
Tip: To put an active call on hold, press the call key. To activate the held call, press  
the call key again.  
Send DTMF tone strings  
1
2
3
4
Select Options >Send DTMF.  
Enter the DTMF string or search for it from the contacts list.  
To enter a wait character (w) or a pause character (p), press * repeatedly.  
To send the tone, select OK. You can add DTMF tones to the phone number or  
DTMF field in contact details.  
End an active call and replace it with another incoming call  
Select Options >Replace.  
End all calls  
Select Options >End all calls.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Make calls 39  
Many of the options that you can use during a voice call are network services.  
Voice mailbox  
To call your voice mailbox (network service), in the home screen, select  
Telephone, and select and hold 1.  
1
2
To change the phone number of your voice mailbox, select Menu >Settings  
and Calling >Call mailbox, a mailbox, and Options >Change number.  
Enter the number (obtained from your network service provider), and select  
OK.  
Answer or reject a call  
To answer a call when the touch screen is locked, swipe the screen. Follow the visual  
cues.  
To answer a call when the touch screen is unlocked, press the call key.  
To mute the ringing tone of an incoming call when the touch screen is locked, swipe  
to unlock the screen.  
To mute the ringing tone of an incoming call when the touch screen is unlocked, ,  
select  
.
You can send a text message without rejecting the call, informing the caller that  
you cannot answer the call. To activate the text message option and write a  
standard reply message, select Menu >Settings and Calling >Call >Reject call  
with message, and Message text. To send the reply message, select Send msg.,  
edit the message text, and press the call key.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
40 Make calls  
If you do not want to answer a call, when the touch screen is unlocked, press the  
end key. If you activate the Call divert >Voice calls >If busy function in phone  
settings, rejecting an incoming call also diverts the call.  
To reject a call when the touch screen is locked, swipe to unlock the screen, and  
select Options >Reject.  
Make a conference call  
Your device supports conference calls between a maximum of six participants,  
including yourself.  
1
2
Make a call to the first participant.  
To make a call to another participant, select Options >New call. The first call  
is put on hold.  
3
When the new call is answered, to add the first participant to the conference  
call, select  
.
Add a new participant to a conference call  
Make a call to another participant, and add the new call to the conference call.  
Have a private conversation with a conference call participant  
Select  
.
Go to the participant, and select  
device. The other participants continue the conference call.  
To return to the conference call, select  
. The conference call is put on hold on your  
.
Drop a participant from a conference call  
Select , go to the participant, and select  
.
End an active conference call  
Press the end key.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Make calls 41  
Speed dial a phone number  
To activate speed dialling, select Menu >Settings and Calling >Call >Speed  
dialling.  
1
To assign a phone number to one of the number keys, select Menu >Settings  
and Calling >Speed dialling.  
2
Go to the key to which you want to assign the phone number, and select  
Options >Assign.  
1 is reserved for the voice mailbox.  
To call in the home screen, select Telephone and the assigned key, and press the  
call key.  
To call in the home screen when speed dialling is active, select Telephone, and  
select and hold the assigned key.  
Call waiting  
With call waiting (network service), you can answer a call when you have another  
call in progress.  
Activate call waiting  
Select Menu >Settings and Calling >Call >Call waiting.  
Answer a waiting call  
Press the call key. The first call is put on hold.  
Swap between an active call and a call on hold  
Select Options >Swap.  
Connect the call on hold to the active call  
Select Options >Transfer. You disconnect yourself from the calls.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
42 Make calls  
End an active call  
Press the end key.  
End both calls  
Select Options >End all calls.  
Voice dialling  
Your device automatically creates a voice tag for contacts.  
Listen to a voice tag for a contact  
1
2
Select a contact and Options >Voice tag details.  
Go to a contact detail, and select Options >Play voice tag.  
Make a call with a voice tag  
Note: Using voice tags may be difficult in a noisy environment or during an  
emergency, so you should not rely solely upon voice dialling in all circumstances.  
When you use voice dialling, the loudspeaker is in use. Hold the device at a short  
distance away when you say the voice tag.  
1
To start voice dialling, in the home screen, press and hold the call key. If a  
compatible headset with the headset key is attached, press and hold the  
headset key to start voice dialling.  
2
3
A short tone sounds, and Speak now is displayed. Say clearly the name that is  
saved for the contact.  
The device plays a synthesised voice tag for the recognised contact in the  
selected device language, and displays the name and number. To cancel the  
voice dialling, select Quit.  
If several numbers are saved for a name, you can say also the name and the number  
type, such as mobile or telephone.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Make calls 43  
Make a video call  
When you make a video call (network service), you can see a real-time, two-way  
video between you and the recipient of the call. The live video image, or video image  
captured by the camera in your device is shown to the video call recipient.  
To be able to make a video call, you must have a USIM card and be in the coverage  
of a UMTS network. For availability, pricing and subscription to video call services,  
contact your network service provider.  
A video call can only be made between two parties. The video call can be made to  
a compatible mobile device or an ISDN client. Video calls cannot be made while  
another voice, video, or data call is active.  
Icons  
You are not receiving video (the recipient is not sending video or the  
network is not transmitting it).  
You have denied video sending from your device. To send a still image  
instead, select Menu >Settings and Calling >Call >Image in video  
call.  
Even if you denied video sending during a video call, the call is still charged  
as a video call. Check the pricing with your service provider.  
1
2
In the home screen, select  
phone number.  
or Telephone to open the dialler, and enter the  
Select Options >Call >Video call.  
By default, the secondary camera on the front is used for video calls. Starting a  
video call may take a while. If the call is not successful (for example, video calls  
are not supported by the network, or the receiving device is not compatible),  
you are asked if you want to try a normal call or send a message instead.  
The video call is active when you see two video images, and hear the sound  
through the loudspeaker. The call recipient may deny video sending (indicated  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
44 Make calls  
with ), and you only hear the voice of the caller and may see a still image or  
a grey screen.  
3
To end the video call, press the end key.  
During a video call  
View live video or listen to the caller only  
Select or  
.
Mute or unmute the microphone  
Select or  
.
Activate the loudspeaker  
Select  
. If you have attached a compatible headset with Bluetooth connectivity,  
to route the sound to the headset, select Options >Activate BT handsfree.  
Switch back to the handset  
Select  
.
Use the main camera to send video  
Select Options >Use secondary camera.  
Switch back to using the secondary camera to send video  
Select Options >Use main camera.  
Take a snapshot of the video you are sending  
Select Options >Send snapshot. Video sending is paused and the snapshot is  
displayed to the recipient. The snapshot is not saved.  
Zoom your image  
Select Options >Zoom.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Make calls 45  
Set the video quality  
Select Options >Adjust >Video preference >Normal quality, Clearer detail,  
or Smoother motion.  
Answer or reject a video call  
When a video call arrives,  
is displayed.  
Answer a video call  
Press the call key.  
To start sending live video, select Yes.  
If you do not start sending video, you only hear the voice of the caller. A grey screen  
replaces your own video.  
Start sending video during a video call  
Select Options >Enable >Sending video.  
Replace the grey screen with an image captured by the camera  
Select Menu >Settings and Calling >Call >Image in video call.  
Reject a video call  
Press the end key.  
Video sharing  
Use video sharing (network service) to send live video or a video clip from your  
mobile device to another compatible mobile device during a voice call.  
The loudspeaker is active when you activate video sharing. If you do not want to  
use the loudspeaker for the voice call while you share video, you can also use a  
compatible headset.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
46 Make calls  
Warning:  
Continuous exposure to high volume may damage your hearing. Listen to music at  
a moderate level, and do not hold the device near your ear when the loudspeaker  
is in use.  
Video sharing requirements  
Video sharing requires a 3G connection. Your ability to use video sharing depends  
on the availability of the 3G network. For more information on the service, 3G  
network availability, and fees associated with using this service, contact your  
service provider.  
To use video sharing, ensure the following:  
Your device is set up for person-to-person connections.  
You have an active 3G connection and are within 3G network coverage. If you  
move outside the 3G network during a video sharing session, the sharing stops,  
while your voice call continues.  
Both the sender and recipient are registered to the 3G network. If you invite  
someone to a sharing session and the recipient’s device is not within 3G  
network coverage or does not have video sharing installed or person-to-person  
connections set up, the recipient does not receive invitations. You receive an  
error message that indicates that the recipient cannot accept the invitation.  
Video sharing settings  
To set up video sharing, you need person-to-person and 3G connection settings.  
A person-to-person connection is also known as a Session Initiation Protocol (SIP)  
connection. The SIP profile settings must be configured in your device before you  
can use video sharing. Ask your service provider for the SIP profile settings, and save  
them to your device. Your service provider may send you the settings or give you a  
list of the needed parameters.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Make calls 47  
Add a SIP address to a contact  
1
2
3
4
5
Select Menu >Contacts.  
Select a contact or create a new contact.  
Select Options >Edit.  
Select Options >Add detail >Share video.  
Enter the SIP address in the format username@domainname (you can use an  
IP address instead of a domain name).  
If you do not know the SIP address for the contact, you can use the phone  
number of the recipient, including the country code, to share video (if supported  
by the network service provider).  
Set up your 3G connection  
Contact your service provider to establish an agreement for you to use the 3G  
network.  
Ensure that the 3G access point connection settings for your device are configured  
properly. For more information about the settings, contact your service provider.  
Share live video or video clips  
During an active voice call, select Options >Share video.  
1
To share live video during the call, select Live video.  
To share a video clip, select Video clip. A list of video clips saved in the device  
memory or the mass memory opens. Select the clip you want to share.  
You may need to convert the video clip into a suitable format to be able to share  
it. If your device notifies you that the video clip must be converted, select OK.  
Your device must have a video editor for the conversion to work.  
2
If the recipient has several SIP addresses or phone numbers including the  
country code saved in Contacts, select the desired address or number. If the SIP  
address or phone number of the recipient is not available, enter the address or  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
48 Make calls  
number of the recipient including the country code, and select OK to send the  
invitation. Your device sends the invitation to the SIP address.  
Sharing begins automatically when the recipient accepts the invitation.  
Options during video sharing  
to mute or unmute the microphone  
to switch the loudspeaker on and off  
to pause and resume video sharing  
to switch to full screen mode (available for receiver only)  
3
To end the sharing session, select Stop. To end the voice call, press the end key.  
When you end the call, video sharing also ends.  
To save the live video you shared, select Yes when prompted. The device notifies  
you of the location of the saved video.  
If you access other applications while you are sharing a video clip, the sharing is  
paused. To return to the video sharing view and to continue sharing, in the home  
screen, select Options >Resume video sharing.  
Accept a video sharing invitation  
When someone sends you a video sharing invitation, the invitation message  
displays the sender’s name or SIP address.  
If someone sends you a sharing invitation and you are not within 3G network  
coverage, you will not receive the invitation.  
Accept the received invitation  
Select Yes. The sharing session is activated.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Make calls 49  
Reject the received invitation  
Select No. The sender receives a message that you rejected the invitation. You can  
also press the end key to reject the invitation and end the voice call.  
End the sharing session  
Select Stop or end the voice call. When you end the call, video sharing also ends.  
Log  
The Log application stores information about the communication history of the  
device. The device registers missed and received calls only if the network supports  
these functions, and the device is switched on and within the network service area.  
Recent calls  
You can view information about your recent calls.  
Select Menu >Log and Recent calls.  
View missed, received, and dialled calls  
Select Missed calls, Received calls, or Dialled numbers.  
Tip: To open the dialled numbers list in the home screen, press the call key.  
Select Options and from the following:  
Save to Contacts — Save a phone number from a recent calls list to your contacts.  
Clear list — Clear the selected recent calls list.  
Delete — Clear an event in the selected list.  
Settings — Select Log duration and the length of time that the communication  
information is saved in the log. If you select No log, no information is saved in the  
log.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
50 Make calls  
Packet data  
Select Menu >Log.  
You may be charged for your packet data connections by the amount of data sent  
and received.  
Check the amount of data sent or received during packet data connections  
Select Data counter >All sent data or All received data.  
Clear both sent and received information  
Select Data counter >Options >Clear counters. You need the lock code to clear  
the information.  
Call duration  
You can view the approximate duration of your last call, dialled and received calls,  
and all calls.  
Select Menu >Log and Call duration.  
Monitor all communication events  
In the general log, you can view information on communication events, such as  
voice calls, text messages, or data and wireless LAN (WLAN) connections registered  
by your device.  
Select Menu >Log.  
Open the general log  
Open the general log tab  
.
Subevents, such as a text message sent in more than one part and packet data  
connections, are logged as one communication event. Connections to your mailbox,  
multimedia messaging centre, or web pages are shown as packet data connections.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Write text 51  
View the packet data connection details  
Go to an incoming or outgoing packet data connection event indicated with GPRS,  
and select Options >View.  
Copy a phone number from the log  
Select Options >Use number >Copy. You can, for example, paste the phone  
number to a text message.  
Filter the log  
Select Options >Filter and a filter.  
Define the log duration  
Select Options >Settings >Log duration. If you select No log, all the log  
contents, recent calls register, and messaging delivery reports are permanently  
deleted.  
Write text  
Tap any text input field to enter letters, numbers, and special characters.  
Your device can complete words based on the built-in dictionary for the selected  
text input language. The device also learns new words from your input.  
Automatic input modes  
When the sensors and display rotation in your device are activated, the input mode  
is automatically switched to full-screen keyboard in landscape mode and to  
alphanumeric keypad in portrait mode.  
To activate the sensors and display rotation, do the following:  
1
2
Select Menu >Settings and Phone >Sensor settings >Sensors >On.  
Select Turning control >Auto-rotate display.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
52 Write text  
Virtual keyboard  
You can use the virtual keyboard in landscape mode.  
To activate the virtual keyboard, select  
>Full screen QWERTY. This function is  
not available, if the automatic input mode switch is in use (sensors are activated).  
1
2
Close - Close the virtual keyboard.  
Input menu - Open the touch input options menu to access commands such as  
Writing language.  
3
4
Virtual keyboard  
Shift and caps lock - To enter an uppercase character when writing in lowercase,  
or vice versa, select the key before entering the character. To activate the caps  
lock, select the key twice. A line under the key indicates that the caps lock is  
activated.  
5
6
7
8
9
Letters  
Numbers and special characters  
Character accents  
Space bar  
Move the cursor after inputting characters.  
10 Backspace  
11 Enter – Move the cursor to the next row or text input field. Additional functions  
are based on the current context.  
12 Input mode - Select the input method. When you tap an item, the current input  
method view closes, and the selected one opens. The availability of input modes  
may vary depending on whether the automatic input modes are activated or  
not.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Write text 53  
Alphanumeric keypad  
Virtual keypad  
With the virtual keypad (Alphanumeric keypad), you can enter characters like you  
would with a traditional physical keypad with numbers on the keys.  
1
2
Close - Closes the virtual keypad (Alphanumeric keypad).  
Input menu - Opens the touch input menu, which includes commands such as  
Activate predictive text and Writing language.  
3
Text input indicator - Opens a pop-up window, in which you can activate or  
deactivate predictive text input modes, change the character case, and switch  
between letter and number modes.  
4
Input mode - Opens a pop-up window, in which you can select the input mode.  
When you tap an item, the current input method view closes, and the selected  
one opens. The availability of input modes may vary depending on whether the  
automatic input mode (sensor settings) is activated or not.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
54 Write text  
5
6
7
8
9
Arrow keys - Scroll left or right.  
Backspace  
Numbers  
Star - Opens a special characters table.  
Shift - Changes the character case, activates or deactivates predictive text input  
modes, and switches between letter and number modes.  
Traditional text input  
Tap a number key (1-9) repeatedly until the desired character appears. There are  
more characters available for a number key than are visible on the key.  
If the next letter is located on the same key as the present one, wait until the cursor  
appears (or move the cursor forward to end the time-out period), and enter the  
letter.  
To insert a space, tap 0. To move the cursor to the next line, tap 0 three times.  
Predictive text input  
With predictive text input, you can enter any word with a single key selection.  
Predictive text input is based on a built-in dictionary to which you can add new  
words. Predictive text input is not available for all languages.  
1
To activate predictive text input for all editors on the device, select  
>
Activate prediction. You can also select  
>Activate predictive text.  
2
To write the desired word, use the keys 2-9. Select each key only once for one  
letter. For example, to write "Nokia" when the English dictionary is selected,  
select 6 for N, 6 for o, 5 for k, 4 for i, and 2 for a.  
The word suggestion changes after each key selection.  
3
When you finish writing the word correctly, move the cursor right to confirm  
it, or select 0 to add a space.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Contacts 55  
If the word is not correct, select * repeatedly to view the matching words the  
dictionary has found one by one.  
If the ? character is displayed after the word, the word is not in the dictionary.  
To add a word to the dictionary, select Spell, enter the word using traditional  
text input, and select OK. The word is added to the dictionary. When the  
dictionary is full, a new word replaces the oldest added word.  
4
Start writing the next word.  
Switch between text modes  
To deactivate predictive text input for all editors in your device, select  
Deactivate prediction, or quickly double-tap #. Alternatively, you can select  
Predictive text >Off.  
>
>
Touch input settings  
Select Menu >Settings and Phone >Touch input.  
Select from the following:  
Writing language — Change the writing language and the language of the  
dictionary in predictive text input.  
Adaptive search — Filter the contents of a list in an application according to the  
characters written in the search field.  
Contacts  
You can save and update contact information, such as phone numbers, home  
addresses, or e-mail addresses of your contacts. You can add a personal ringing tone  
or a thumbnail image to a contact. You can also create contact groups, which allow  
you to send text messages or e-mail to many recipients at the same time.  
To open the contacts list, in the home screen, depending on the home screen theme,  
select Contacts or  
.
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
56 Contacts  
Save and edit names and numbers  
Select Menu >Contacts.  
Add a new contact to the contacts list  
1
2
Select  
.
Select a field to enter information. To close the text input, select  
. Fill in the  
appropriate fields, and select Done.  
Edit contacts  
Select a contact and Options >Edit.  
Contacts toolbar  
Select Menu >Contacts.  
Call a contact  
Go to a contact, and select  
.
Send a message to a contact  
Go to a contact, and select  
.
Create a new contact  
Select  
.
Manage names and numbers  
To copy or delete a contact, or to send a contact as a business card to another device,  
tap and hold a contact, and select Copy, Delete, or Send business card.  
To delete several contacts at the same time, select Options >Mark/Unmark to  
mark the desired contacts, and to delete, select Options >Delete.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Contacts 57  
To listen to the voice tag assigned to a contact, select the contact and Options >  
Voice tag details >Options >Play voice tag.  
Before using voice tags, note the following:  
Voice tags are not language-dependent. They are dependent on the speaker's  
voice.  
You must say the name exactly as you said it when you recorded it.  
Voice tags are sensitive to background noise. Record voice tags and use them  
in a quiet environment.  
Very short names are not accepted. Use long names, and avoid similar names  
for different numbers.  
Note: Using voice tags may be difficult in a noisy environment or during an  
emergency, so you should not rely solely upon voice dialling in all circumstances.  
Assign default numbers and addresses  
If a contact has several numbers or addresses, a default number or address makes  
it easier for you to call or send a message to the contact. The default number is also  
used in voice dialling.  
1
2
3
Select Menu >Contacts.  
Select a contact and Options >Defaults.  
Select a default to which you want to add a number or an address, and select  
Assign.  
4
5
Select a number or an address you want to set as a default.  
To exit the Defaults view and save the changes, tap outside the view.  
Ringing tones, images, and call text for contacts  
You can define a ringing tone for a contact or contact group, and an image and call  
text for a contact. When the contact calls you, the device plays the selected ringing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
58 Contacts  
tone and shows the call text or image (if the caller’s phone number is sent with the  
call and your device recognises it).  
Select Menu >Contacts.  
Add more fields to a contact details view  
Select the contact and Options >Edit >Options >Add detail.  
Define a ringing tone for a contact or contact group  
Select the contact or contact group and Options >Ringing tone, and select a  
ringing tone.  
Remove the ringing tone from a contact  
Select Default tone from the list of ringing tones.  
Add an image for a contact  
Select a contact saved in the device memory and Options >Add image, and select  
an image from Gallery.  
Define a call text for a contact  
Select the contact and Options >Add call alert text. Enter the call text, and select  
.
View, change or remove the image from a contact  
Select a contact and Options >Image, and the desired option.  
Copy contacts  
Select Menu >Contacts.  
When you open the contacts list for the first time, the device asks if you want to  
copy names and numbers from the SIM card to your device.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Contacts 59  
Start copying  
Select OK.  
Cancel copying  
Select Cancel.  
The device asks if you want to view the SIM card contacts in the contacts list. To  
view the contacts, select OK. The contacts list opens, and the names stored on your  
SIM card are indicated with  
.
SIM services  
For availability and information on using SIM card services, contact your SIM card  
vendor. This may be the network service provider or other vendor.  
SIM contacts  
The number of contacts that can be stored on the SIM card is limited.  
Display contacts stored on the SIM card in the contacts list  
Select Options >Settings >Contacts to display >SIM memory.  
The numbers you save in the contacts list may not be automatically saved to your  
SIM card.  
Copy contacts to the SIM card  
Go to a contact, and select Options >Copy >SIM memory.  
Select the default memory where to save the new contacts  
Select Options >Settings >Default saving memory >Phone memory or SIM  
memory.  
Contacts stored in the device memory can contain more than one phone number  
and an image.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
60 Messaging  
Fixed dialling  
With the fixed dialling service, you can restrict calls from your device to certain  
phone numbers. Not all SIM cards support the fixed dialling service. For more  
information, contact your service provider.  
Select Menu >Contacts and Options >SIM numbers >Fixed dial contacts.  
When security features that restrict calls are in use (such as call barring, closed user  
group, and fixed dialling), calls may be possible to the official emergency number  
programmed into your device. Call barring and call diverting cannot be active at the  
same time.  
You need your PIN2 code to activate and deactivate fixed dialling or edit your fixed  
dialling contacts. Contact your service provider for your PIN2 code.  
Select Options and from the following:  
Activate fixed dialling or Deactivate fixed dialling — Activate or deactivate fixed  
dialling.  
New SIM contact — Enter the contact name and phone number to which calls are  
allowed.  
Add from Contacts — Copy a contact from the contacts list to the fixed dialling  
list.  
To send text messages to the SIM contacts while the fixed dialling service is active,  
you need to add the text message centre number to the fixed dialling list.  
Messaging  
Messaging main view  
Select Menu >Messaging (network service).  
Create a new message  
Select New message.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Messaging 61  
Tip: To avoid rewriting messages that you send often, use saved messages in the  
Templates folder in My folders. You can also create and save your own templates.  
Messaging contains the following folders:  
Inbox — Received messages, except e-mail and cell broadcast messages.  
My folders — Organise your messages into folders.  
Mailbox — Connect to your remote mailbox to retrieve your new e-mail  
messages, or view your previously retrieved e-mail messages offline.  
Drafts — Draft messages that have not been sent.  
Sent — The last messages that have been sent, excluding messages sent using  
Bluetooth connectivity. You can define the number of messages that can be saved  
in this folder.  
Outbox — Messages waiting to be sent are temporarily stored in the Outbox,  
for example, when your device is outside network coverage.  
Delivery reports — Request the network to send you a delivery report of the  
text messages and multimedia messages you have sent (network service).  
Write and send messages  
Select Menu >Messaging.  
Important: Exercise caution when openingmessages. Messages may contain  
malicious software or otherwise be harmful to your device or PC.  
Before you can create a multimedia message or write a mail, you must have the  
correct connection settings defined.  
The wireless network may limit the size of MMS messages. If the inserted picture  
exceeds this limit, the device may make it smaller so that it can be sent by MMS.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
62 Messaging  
Only devices that have compatible features can receive and display multimedia  
messages. The appearance of a message may vary depending on the receiving  
device.  
Check the size limit of mail messages with your service provider. If you attempt to  
send a mail message that exceeds the size limit of the mail server, the message is  
left in the Outbox folder, and the device attempts to resend it periodically. Sending  
a mail requires a data connection, and continuous attempts to resend the mail may  
incur charges from your service provider. In the Outbox folder, you can delete such  
a message or move it to the Drafts folder.  
Messaging requires network services.  
Send a text or multimedia message  
Select New message.  
Send an audio or mail message  
Select Options >Create message, and the relevant option.  
Select recipients or groups from the contacts list  
Select  
from the toolbar.  
Enter the number or mail address manually  
Tap the To field.  
Enter the subject of the mail or multimedia message  
Enter it in the Subject field, . If the Subject field is not visible, select Options >  
Message header fields to change the fields that are visible.  
Write the message  
Tap the message field.  
Add an object to a message or mail  
Select and the relevant type of content.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Messaging 63  
The message type may change to multimedia message based on the inserted  
content.  
Send the message or mail  
Select  
, or press the call key.  
Your device supports text messages beyond the limit for a single message. Longer  
messages are sent as two or more messages. Your service provider may charge  
accordingly. Characters with accents, other marks, or some language options take  
more space, and limit the number of characters that can be sent in a single message.  
Messaging inbox  
Receive messages  
Select Menu >Messaging and Inbox.  
An unread text message  
An unread multimedia message  
An unread audio message  
Data received through Bluetooth connectivity  
When you receive a message,  
and 1 new message are displayed in the home  
screen.  
Open a message from the home screen  
Select Show.  
Open a message in the Inbox folder  
Select the message.  
Reply to a received message  
Select Options >Reply.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
64 Messaging  
Multimedia messages  
Select Menu >Messaging.  
Important: Exercise caution when openingmessages. Messages may contain  
malicious software or otherwise be harmful to your device or PC.  
Retrieve multimedia messages  
Select Options >Retrieve. A packet data connection is opened to retrieve the  
message to your device. You may receive a notification that a multimedia message  
is waiting in the multimedia message centre.  
When you open a multimedia message ( ), you may see an image and a message.  
indicates that a sound clip is included.  
indicates that a video clip is included.  
Play the sound or video clip  
Select the indicator.  
View the media objects that have been included in a multimedia message  
Select Options >Objects.  
If the message includes a multimedia presentation,  
is displayed.  
Play the presentation  
Select the indicator.  
Data, settings, and web service messages  
Your device can receive many kinds of messages that contain data, such as business  
cards, ringing tones, operator logos, calendar entries, and e-mail notifications. You  
may also receive settings from your service provider in a configuration message.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Messaging 65  
Save the data in a message  
Select Options and the corresponding option.  
Web service messages are notifications (for example, news headlines), and may  
contain a text message or a link. For availability and subscription, contact your  
service provider.  
Set up e-mail  
To set up e-mail, select Menu >Messaging and Mailbox.  
You can set up several e-mail accounts, for example, a personal e-mail account and  
a corporate e-mail account.  
To set up e-mail from your home screen, select the relevant plug-in. Alternatively,  
to set up an e-mail account, select Menu >Applications >Sett. wizard.  
Nokia Messaging  
The Nokia Messaging service automatically transfers e-mail from your existing e-  
mail address to your device. You can read, respond to, and organise your e-mails  
on the go. The Nokia Messaging service works with a number of internet e-mail  
providers that are often used for personal e-mail.  
The Nokia Messaging service may be chargeable. For information on possible costs,  
contact your service provider or the Nokia Messaging service.  
The Nokia Messaging service must be supported by your network and may not be  
available in all regions.  
Nokia Messaging is currently provided on a trial basis.  
Install the Nokia messaging application  
1
Select Menu >Applications >Sett. wizard.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
66 Messaging  
2
When the Settings wizard is opened for the first time, you are asked to define  
the e-mail settings after the operator settings. If you have used the Settings  
wizard before, select E-mail setup.  
3
4
5
In the e-mail setup, read the information on the display, and select Start.  
Accept the installation of the Nokia Messaging application.  
Enter your e-mail account details.  
The Nokia Messaging application is installed in Menu >Applications.  
For more information, see www.email.nokia.com.  
Mailbox  
Define e-mail settings  
Select Menu >Messaging and Mailbox.  
To use e-mail, you must have defined a valid internet access point (IAP) in your  
device and have defined your e-mail settings correctly.  
You must have a separate e-mail account. Follow the instructions given by your  
remote mailbox and internet service provider (ISP).  
If you select Messaging >Mailbox, and have not set up your e-mail account, you  
are prompted to do so. To start defining the e-mail settings with the mailbox guide,  
select Start.  
When you create a new mailbox, the name you give to the mailbox replaces Mailbox  
in the Messaging main view. You can have up to six mailboxes.  
Open the mailbox  
Select Menu >Messaging and a mailbox.  
When you open the mailbox, the device asks if you want to connect to the mailbox.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Messaging 67  
Connect to your mailbox and retrieve new e-mail headers or messages  
Select Yes. When you view messages online, you are continuously connected to a  
remote mailbox using a data connection.  
View previously retrieved e-mail messages offline  
Select No.  
Create a new e-mail message  
Select Options >Create message >E-mail.  
Close the data connection to the remote mailbox  
Select Options >Disconnect.  
Retrieve e-mail messages  
Select Menu >Messaging and a mailbox.  
If you are offline, select Options >Connect to open a connection to the remote  
mailbox.  
Important: Exercise caution when openingmessages. Messages may contain  
malicious software or otherwise be harmful to your device or PC.  
Retrieve messages when you have an open connection to a remote mailbox  
Select Options >Retrieve e-mail >New to retrieve all new messages, Selected  
to retrieve only selected messages, or All to retrieve all messages from the mailbox.  
To stop retrieving messages, select Cancel.  
Close the connection and view the e-mail messages offline  
Select Options >Disconnect.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
68 Messaging  
Open an e-mail message offline  
To open an e-mail message, select the message. If the e-mail message has not been  
retrieved and you are offline, you are asked if you want to retrieve this message  
from the mailbox.  
View e-mail attachments  
Open the message, and select the attachment field indicated with . If the  
attachment has not been retrieved to the device, select Options >Retrieve.  
Retrieve e-mail messages automatically  
Select Options >E-mail settings >Automatic retrieval.  
Setting the device to retrieve e-mail automatically may involve the transmission of  
large amounts of data through your service provider's network. Contact your service  
provider for information about data transmission charges.  
Delete e-mail messages  
Select Menu >Messaging and a mailbox.  
Delete the content of an e-mail from the device only  
Select Options >Delete >Phone only. The e-mail is not deleted from the remote  
mailbox.  
The device mirrors the e-mail headers in the remote mailbox. If you delete the  
message content, the e-mail header stays in your device. If you want to remove the  
header as well, you must be connected to the server when deleting the message  
from your device and the remote mailbox. It there is no connection to the server,  
the header is deleted when you make a connection from your device to the remote  
mailbox again to update the status.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Messaging 69  
Delete an e-mail from the device and the remote mailbox  
Select Options >Delete >Phone and server.  
Cancel deleting an e-mail that has been marked to be deleted from the device  
and server  
Select Options >Restore.  
Disconnect from the mailbox  
When you are online, to end the data connection to the remote mailbox, select  
Options >Disconnect.  
Mail for Exchange  
With Mail for Exchange, you can receive your work e-mail to your device. You can  
read and reply to your e-mails, view and edit compatible attachments, view  
calendar information, receive and reply to meeting requests, schedule meetings,  
and view, add, and edit contact information.  
ActiveSync  
Use of the Mail for Exchange is limited to over-the-air synchronisation of PIM  
information between the Nokia device and the authorised Microsoft Exchange  
server.  
Mail for Exchange can be set up only if your company has Microsoft Exchange Server.  
In addition, your company's IT administrator must have activated Mail for Exchange  
for your account.  
Before starting to set up Mail for Exchange, ensure that you have the following:  
A corporate e-mail ID  
Your office network user name  
Your office network password  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
70 Messaging  
Your network domain name (contact your company's IT department)  
Your Mail for Exchange server name (contact your company's IT department)  
Depending on your company's Mail for Exchange server configuration, you may need  
to enter other information in addition to those listed. If you do not know the correct  
information, contact your company's IT department.  
With Mail for Exchange, the use of the lock code may be mandatory. The default lock  
code of your device is 12345, but your company's IT administrator may have set a  
different one for you to use.  
You can access and modify the Mail for Exchange profile and settings in the  
Messaging settings.  
View messages on a SIM card  
You can view messages that are stored on a SIM card.  
Select Menu >Messaging and Options >SIM messages.  
Before you can view SIM messages, you must copy them to a folder in your device.  
1
2
3
4
Mark the messages. Select Options >Mark/Unmark >Mark or Mark all.  
Open a list of folders. Select Options >Copy.  
Select a folder to copy.  
To view the messages, open the folder .  
Cell broadcast messages  
Cell broadcast (network service) allows you to receive messages on various topics,  
such as weather or traffic conditions, from your service provider. For available topics  
and relevant topic numbers, contact your service provider. This service may not be  
available for all regions.Cell broadcast messages cannot be received in 3G networks.  
A packet data connection may prevent cell broadcast reception.  
Select Menu >Messaging and Options >Cell broadcast.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Messaging 71  
Service commands  
With service commands (network service) you can enter and send service requests  
(also known as USSD commands), such as activation commands for network  
services, to your service provider. This service may not be available for all regions.  
Select Menu >Messaging and Options >Service commands.  
Messaging settings  
The settings may be preconfigured in your device, or you may receive them in a  
message. To enter settings manually, fill in all fields marked with Must be defined  
or an asterisk.  
Some or all message centres or access points may be preset for your device by your  
service provider, and you may not be able to change, create, edit, or remove them.  
Text message settings  
Select Menu >Messaging and Options >Settings >Text message.  
Select from the following:  
Message centres — View a list of all text message centres that have been defined.  
Message centre in use — Select which message centre to use to deliver text  
messages.  
Character encoding — To use character conversion to another encoding system  
when available, select Reduced support.  
Receive report — Request the network to send you a delivery report of the text  
messages you have sent (network service).  
Message validity — Select for how long the message centre resends your message  
if the first attempt fails (network service). If the message cannot be sent within this  
time period, the message is deleted from the message centre.  
Message sent as — To find out if your message centre is able to convert text  
messages into these other formats, contact your service provider.  
Preferred connection — Select the connection to use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
72 Messaging  
Reply via same centre — Reply to messages using the same text message centre  
number (network service).  
Multimedia message settings  
Select Menu >Messaging and Options >Settings >Multimedia message.  
Select from the following:  
Image size — Define the size of the image in a multimedia message.  
MMS creation mode — If you select Guided, the device informs you if you try to  
send a message that may not be supported by the recipient. If you select  
Restricted, the device prevents you from sending messages that may not be  
supported. To include content in your messages without notifications, select Free.  
Access point in use — Select which access point is used as the preferred  
connection.  
Multimedia retrieval — Select how you want to receive messages, if available. To  
receive messages automatically in your home network, select Auto in home  
netw.. Outside your home network, you receive a notification that there is a  
message to retrieve in the multimedia message centre. If you select Always  
automatic, your device automatically makes an active packet data connection to  
retrieve the message both in and outside your home network. Select Manual to  
retrieve multimedia messages from the message centre manually, or Off to prevent  
receipt of any multimedia messages. Automatic retrieval may not be supported in  
all regions.  
Allow anonymous msgs. — Reject messages from anonymous senders.  
Receive adverts — Receive multimedia message advertisements (network  
service).  
Receive reports — Display the status of sent messages in the log (network service).  
Deny report sending — Prevent your device from sending delivery reports of  
received messages.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Personalise your device 73  
Message validity — Select for how long the message centre resends your message  
if the first attempt fails (network service). If the message cannot be sent within this  
time period, the message is deleted from the message centre.  
The device requires network support to indicate that a sent message has been  
received or read. Depending on the network and other circumstances, this  
information may not always be reliable.  
E-mail settings  
Manage mailboxes  
Select Menu >Messaging and Options >Settings >E-mail.  
Select which mailbox you want to use to send and receive e-mail  
Select Mailbox in use and a mailbox.  
Remove a mailbox and its messages from your device  
Select Mailboxes, go to the desired mailbox, and select Options >Delete.  
Create a new mailbox  
Select Mailboxes >Options >New mailbox. The name you give to the new  
mailbox replaces Mailbox in the Messaging main view. You can have up to six  
mailboxes.  
Change the connection settings, user settings, retrieval settings, and  
automatic retrieval settings  
Select Mailboxes and a mailbox.  
Personalise your device  
You can personalise your device by changing the home screen, tones, or themes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
74 Personalise your device  
Change the look of your device  
You can use themes to change the look of the display, such as background image  
and main menu layout.  
Select Menu >Settings and Personal >Themes.  
Preview a theme  
Select General, go to the theme, and wait for a few seconds.  
Activate the theme  
Select Options >Set.  
Change the layout of the main menu  
Select Menu.  
Change the look of the home screen  
Select Home scr. theme.  
Set an image or a slideshow as the background in the home screen  
Select Wallpaper >Image or Slide show.  
Change the image displayed in the home screen when a call is received  
Select Call image.  
Profiles  
You can use profiles to set and customise the ringing tones, message alert tones,  
and other tones for different events, environments, or caller groups. The name of  
the selected profile is displayed in the home screen. If the general profile is in use,  
only the date is displayed.  
Select Menu >Settings and Personal >Profiles.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Music folder 75  
Music folder  
Music player  
Music player supports file formats such as AAC, AAC+, eAAC+, MP3, and WMA. Music  
player does not necessarily support all features of a file format or all the variations  
of file formats.  
You can also use Music player to listen to podcasts. Podcasting is a method for  
delivering audio or video content over the internet using either RSS or Atom  
technologies for playback on mobile devices and computers.  
Play a song or a podcast  
To open Music player, select  
>
.
You may have to refresh the music and podcast libraries after you have updated the  
song or podcast selection in your device. To add all available items to the library,  
select Options >Refresh library.  
To play a song or a podcast:  
1
2
Select categories to navigate to the song or podcasts you want to hear.  
To play an item, select the item from the list.  
To pause playback, tap ; to resume, tap  
To fast-forward or rewind, tap and hold  
.
or  
.
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
76 Music folder  
To go to the next item, tap  
skip to the previous item, tap  
has started.  
. To return to the beginning of the item, tap  
. To  
again within 2 seconds after a song or podcast  
To turn random play ( ) on or off, select Options >Shuffle play.  
To repeat the current item ( ), all items ( ), or to turn repeat off, select  
Options >Repeat.  
If you play podcasts, shuffle and repeat are automatically turned off.  
To adjust the volume, press the volume key.  
To modify the tone of the music playback, select Options >Equaliser.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Music folder 77  
To modify the balance and stereo image or to enhance the bass, select Options >  
Settings.  
To return to the home screen and leave the player playing in the background, press  
the end key.  
To close the player, select Options >Exit.  
Playlists  
Select  
>
and Playlists.  
To view details of the playlist, select Options >Playlist details.  
Create a playlist  
1
2
3
4
Select Options >New playlist.  
Enter a name for the playlist, and select OK.  
To add songs now, select Yes; or to add the songs later, select No.  
If you select Yes, select artists to find the songs you want to add to the playlist.  
Select Add to add items.  
To show the song list under an artist title, select Expand. To hide the song list,  
select Collapse.  
5
When you have made your selections, select Done.  
The playlist is saved to the mass memory of your device.  
To add more songs later, when viewing the playlist, select Options >Add songs.  
To add songs, albums, artists, genres, and composers to a playlist from the different  
views of the music menu, select an item and Options >Add to playlist >Saved  
playlist or New playlist.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
78 Music folder  
To remove a song from a playlist, select Options >Remove.  
This does not delete the song from the device; it only removes it from the playlist.  
To reorder songs in a playlist, select the song you want to move, and Options >  
Reorder playlist.  
To grab a song and drop it to a new position, select the song in the desired position  
and Drop.  
To finish reordering the playlist, select Done.  
Podcasts  
Select  
>
and Podcasts.  
Podcast episodes have three states: never played, partially played, and completely  
played. If the state is partially played, the episode plays from the last playback  
position the next time it is played. If the state is never played or completely played,  
the episode plays from the beginning.  
Transfer music from a computer  
You can use the following methods to transfer music:  
To view your device on a computer as a mass memory device where you can  
transfer any data files, make the connection with a compatible USB data cable  
or Bluetooth connectivity. If you are using a USB data cable, select Mass storage  
as the connection mode.  
To synchronise music with Windows Media Player, connect a compatible USB  
data cable, and select Media transfer as the connection mode.  
To change the default USB connection mode, select Menu >Settings and  
Connectivity >USB >USB connection mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Music folder 79  
Ovi Music  
With Ovi Music (network service), you can search, browse, purchase, and download  
music to your device.  
The Ovi Music service will eventually replace the Music store.  
Select Menu >Music >Ovi Music.  
To download music, you first need to register for the service.  
Downloading music may involve additional costs and the transmission of large  
amounts of data (network service). For information about data transmission  
charges, contact your network service provider.  
To access Ovi Music, you must have a valid internet access point in the device. You  
may be asked to select the access point to use when connecting to Ovi Music.  
Select the access point  
Select Default access point.  
The availability and appearance of Ovi Music settings may vary. The settings may  
also be predefined and you may not be able to modify them. When browsing Ovi  
Music, you may be able to modify the settings.  
Modify Ovi Music settings  
Select Options >Settings.  
Ovi Music is not available for all countries or regions.  
Nokia Podcasting  
With the Nokia Podcasting application (network service), you can search, discover,  
subscribe to, and download podcasts over the air, and play, manage, and share  
audio and video podcasts with your device.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
80 Music folder  
Podcasting settings  
Select Menu >Music >Podcasting.  
To start using Podcasting, define your connection and download settings.  
Connection settings  
Select Options >Settings >Connection and from the following:  
Default access point — Select the access point to use to connect to the internet.  
Search service URL — Define the podcast search service web address, to use to  
search for podcasts.  
Download settings  
Select Options >Settings >Download and from the following:  
Save to — Define where to save podcasts. For optimal use of storage space, mass  
memory is recommended.  
Update interval — Define how often podcasts are updated.  
Next update time — Define the time of the next automatic update.  
Automatic updates only occur if a specific default access point is selected and the  
Podcasting application is open.  
Download limit (%) — Define the percentage of memory that is reserved for  
podcast downloads.  
If limit exceeds — Define what to do if the download limit is exceeded.  
Setting the application to retrieve podcasts automatically may involve the  
transmission of large amounts of data through your service provider’s network. For  
information on data transmission charges, contact your service provider.  
Restore default settings  
Select Options >Restore default.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Music folder 81  
Download podcasts  
After you have subscribed to a podcast, you can download, play, and manage the  
podcast episodes.  
Select Menu >Music >Podcasting.  
View a list of subscribed podcasts  
Select Podcasts.  
View individual episode titles  
Select the podcast title.  
An episode is a particular media file of a podcast.  
Start a download  
Select the episode title.  
You can download multiple episodes at the same time.  
Start playing a podcast before the download is complete  
Go to a podcast, and select Options >Play preview.  
Successfully downloaded podcasts are stored in the Podcasts folder, but may not  
be displayed immediately.  
Radio  
Listen to the radio  
Select Menu >Music >Radio.  
The FM radio depends on an antenna other than the wireless device antenna. A  
compatible headset or accessory needs to be attached to the device for the FM radio  
to function properly.  
When you open the application for the first time, you can choose to have the local  
stations tuned automatically.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
82 Music folder  
To listen to the next or the previous station, select  
or  
.
To mute the radio, select  
.
Select Options and from the following:  
Stations — View saved radio stations.  
Tune stations — Search for radio stations.  
Save — Save the radio station.  
Activate loudspeaker or Deactivate loudspeaker — Turn the loudspeaker on or  
off.  
Alternative frequencies — Select whether you want the radio to automatically  
search for a better RDS frequency for the station if the frequency level becomes low.  
Play in background — Return to the home screen with the radio playing in the  
background.  
Manage radio stations  
Select Menu >Music >Radio.  
To listen to saved stations, select Options >Stations, and select a station from the  
list.  
To remove or rename a station, select Options >Stations >Options >Delete or  
Rename.  
To set the desired frequency manually, select Options >Tune stations >  
Options >Manual tuning.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Gallery 83  
Gallery  
To store and organise your images, video clips, sound clips, and streaming links,  
select  
>
.
Tip: To access the images and video clips view quickly, tap the media key ( ) to  
open the media bar, and select  
.
View and organise files  
Select  
>
.
Select from the following:  
Images & videos — View images in the image viewer and video clips in Video  
centre.  
Songs — Open Music player.  
Sound clips — Listen to sound clips.  
Other media — View presentations.  
Open a file  
Select a file from the list. Video clips and files with the .ram file extension open and  
play in Video centre, and music and sound clips in Music player.  
View images and videos  
Select  
>
and Images & videos.  
By default, the images, video clips, and folders are organised by date and time.  
To open a file, select a file from the list. To zoom in an image, use the volume key.  
To print your images on a compatible printer, select Options >Print.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
84 Gallery  
To edit a video clip or an image, select Options >Edit.  
Select Options >Use file and from the following:  
Set as wallpaper — Use the image as wallpaper in the home screen.  
Set as call image — Set the image as a generic call image.  
Assign to contact — Set the image as a call image for a contact.  
The toolbar helps you select frequently used functions with images, video clips, and  
folders.  
From the toolbar, select from the following:  
Send — Send an image or a video clip.  
Edit — Edit an image or a video clip.  
Delete — Delete an image or a video clip.  
Organise images and video clips  
Select  
>
.
Create a new folder  
Select Images & videos >Options >Folder options >New folder.  
Move a file  
Select the file and Options >Folder options >Move to folder.  
TV-out mode  
You can view your images and video clips on a compatible TV.  
Select Menu >Settings.  
To view your images and video clips on a compatible TV, use a Nokia Video-Out  
Cable.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Gallery 85  
Before viewing images and video clips on the TV, you may need to define the TV  
system (PAL or NTSC) and TV aspect ratio (Widescreen or Normal).  
Define the TV system and aspect ratio  
Select Phone >Accessories >TV-Out.  
In TV-out mode, you cannot use the TV as the camera viewfinder.  
View images and play video clips on a TV  
1
2
3
4
Connect a Nokia Video-Out Cable to the video input of a compatible TV.  
Connect the other end of the cable to the Nokia AV Connector of your device.  
You may need to select the USB cable mode.  
Select  
>
, and an image or a video clip.  
The images are viewed in the image viewer, and the video clips are played in  
RealPlayer.  
All audio, including active calls, stereo video clip audio, key tones, and ringing tones,  
are played through the TV. You can use the device microphone normally.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
86 Camera  
The opened image is displayed in full-screen mode on the TV. When you open an  
image in the thumbnail view while it is displayed on the TV, zooming in is not  
available.  
When you select a video clip, it is played on the device display and the TV screen.  
You can view images as a slide show on the TV. All items in an album or marked  
images are displayed on the TV in full-screen mode.  
The quality of the TV image may vary, depending on the resolution of the connected  
device.  
Wireless radio signals, such as incoming calls, may cause interference in the TV  
image.  
Camera  
Your device has two cameras, a high resolution camera on the back of the device,  
and a lower resolution camera on the front. You can use both cameras to capture  
images and record videos.  
Your device supports an image capture resolution of 2592x1944 pixels. The image  
resolution in this guide may appear different.  
Activate the camera  
To activate the camera, press the capture key.  
To activate the secondary camera, activate the main camera, and select Options >  
Use secondary camera.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Camera 87  
Image capture  
Still image controls and indicators  
The still image viewfinder displays the following:  
1
2
3
4
5
6
7
8
Mode indicator  
Zoom slider. To activate or deactivate the zoom slider, tap the screen.  
Capture icon  
Flash mode  
Capture settings  
Battery charge level indicator  
Image resolution indicator  
Image counter (the estimated number of images you can capture using the  
current image quality setting and available memory)  
Memory in use. Depending on the setup of your device, there are the following  
options: device memory ( ) or mass memory ( ).  
9
10 GPS signal indicator  
Capture and recording settings  
To open the capture and recording settings view before capturing an image or  
recording a video clip, select Menu >Applications >Camera and  
.
The capture and recording settings view provides you with shortcuts to different  
items and settings before capturing an image or recording a video clip.  
The capture and recording settings return to the default settings after you close the  
camera.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
88 Camera  
Select from the following:  
Select the scene.  
or  
or  
Switch between video and image mode.  
Show or hide the viewfinder grid (images only).  
Activate the self-timer (images only).  
Activate sequence mode (images only).  
Open Gallery.  
Image settings:  
Select a colour effect.  
Adjust the white balance. Select the current lighting conditions. This allows the  
camera to reproduce colours more accurately.  
Adjust the exposure compensation (images only). If you are shooting a dark  
subject against a very light background, such as snow, adjust the exposure to +1 or  
+2 to compensate for the background brightness. For light subjects against a dark  
background, use -1 or -2.  
Adjust light sensitivity (images only). Increase the light sensitivity in low light  
conditions to avoid too dark images and blurry images. Increasing the light  
sensitivity may also increase the image noise.  
Adjust contrast (images only). Adjust the difference between the lightest and  
darkest parts of the image.  
Adjust sharpness (images only).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Camera 89  
The screen display changes to match the settings you define.  
The capture settings are shooting-mode specific. Switching between the modes  
does not reset the defined settings.  
If you select a new scene, the capture settings are replaced by the selected scene.  
You can change the capture settings after selecting a scene if needed.  
Saving the captured image may take longer if you change the zoom, lighting, or  
colour settings.  
Capture images  
When capturing an image, note the following:  
Use both hands to keep the camera still.  
The quality of a digitally zoomed image is lower than that of a non-zoomed  
image.  
The camera goes into battery saving mode if there are no actions for about a  
minute. To continue capturing images, slide the lock switch on the side of the  
device.  
To capture an image:  
1
2
To switch from video mode to image mode, if necessary, select  
>
.
To lock the focus on an object, press the capture key halfway down (not  
available in landscape or sport scene modes). A green locked focus indicator is  
displayed. If the focus was not locked, a yellow focus indicator is displayed.  
Release the capture key, and press it halfway down again. You can also capture  
an image without locking the focus.  
3
To capture an image, press the capture key. Do not move the device before the  
image is saved and the final image displayed.  
To zoom in or out when capturing an image, use the zoom key in your device.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
90 Camera  
To leave the camera open in the background and use other applications, press the  
menu key. To return to the camera, press and hold the capture key.  
After capturing an image  
After you capture an image, select from the following options (available only if you  
have selected Options >Settings >Show captured image >Yes):  
— Send the image in a multimedia or e-mail message, or through connection  
methodssuchas Bluetooth connectivity. You can also postyourimage to compatible  
online sharing services.  
To send the image to the person you are talking to, select  
— Post your image to compatible online sharing services.  
— Delete the image.  
during a call.  
To use the image as wallpaper in the home screen, select Options >Use image >  
Set as wallpaper.  
To set the image as a default call image to be used for every call situation, select  
Options >Use image >Set as call image.  
To assign the image to a contact, Options >Use image >Assign to contact.  
To return to the viewfinder to capture a new image, press the capture key.  
Flash and video light  
The camera of your device has a dual LED flash for low light conditions.  
To select the desired flash mode, select the current flash mode indicator, which is  
one of the following: Automatic,  
Reduce red, On, and Off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Camera 91  
Avoid touching the flash LEDs when the back cover has been removed. The LEDs may  
get hot after prolonged usage.  
Keep a safe distance when using the flash. Do not use the flash on people or animals  
at close range. Do not cover the flash while taking a picture.  
Increase light levels when recording video in low light  
Select  
.
Scenes  
A scene helps you to find the right colour and lighting settings for the current  
environment. The settings of each scene have been set according to a certain style  
or environment.  
The default scene in image mode is Automatic, and in video mode Automatic (both  
indicated with ).  
To change the scene, select  
>Scene modes and a scene.  
To make your own scene suitable for a certain environment, scroll to User defined  
, and select Change. In the user defined scene you can adjust different lighting  
and colour settings. To copy the settings of another scene, select Based on scene  
mode and the desired scene. To save the changes and return to the scenes list,  
select Back. To activate your own scene, select User defined >Select.  
Location information  
You can automatically add capture location information to the file details of the  
captured material.  
Select Menu >Applications >Camera.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
92 Camera  
Add location information to all captured material  
Select Options >Settings >Show GPS info >On. The location information is  
available only for images captured with the main camera.  
It may take several minutes to obtain the coordinates of your location. The  
availability and quality of GPS signals may be affected by your location, buildings,  
natural obstacles, and weather conditions. If you share a file that includes location  
information, also the location information is shared, and your location may be  
visible to third parties viewing the file. The device requires network services to  
acquire location information.  
Location information indicators:  
— Location information unavailable. GPS stays active in the background for  
several minutes. If a satellite connection is made and the indicator changes to  
within that time, all the images captured and video clips recorded during that time  
are tagged based on the received GPS positioning information.  
— Location information is available. Location information is added to the file  
details.  
Self-timer  
Use the self-timer to delay the capture, so that you can include yourself in the image.  
Set the self-timer delay  
Select  
>
and the delay desired before the image is captured.  
Activate the self-timer  
Select Activate. The stopwatch icon on the screen blinks and the remaining time is  
displayed when the timer is running. The camera captures the image after the  
selected delay elapses.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Camera 93  
Deactivate the self-timer  
Select  
>
>
.
Tip: To keep your hand steady when capturing an image, try using a delay of 2  
seconds.  
Capture images in a sequence  
Select Menu >Applications >Camera.  
The sequence mode is available only in the main camera.  
To start capturing images in a quick sequence, select Menu >Applications >  
Camera and  
>Sequence. To close the settings window, tap the screen above  
the window. Press and hold the capture key. The device captures images until you  
release the key or until the memory runs out. If you press the capture key briefly,  
the device captures 18 images in a sequence.  
The captured images are displayed in a grid. To view an image, select the image.  
To return to the sequence mode viewfinder, press the capture key.  
You can also use sequence mode with the self-timer.  
To deactivate sequence mode, select  
>Single shot.  
Video recording  
Record a video clip  
1
2
To switch from image mode to video mode, if necessary, select  
>
.
To start recording, press the capture key, or select . A red record icon is  
displayed.  
3
To pause recording, select Pause. To resume, select Continue. If you pause  
recording and do not press any key within one minute, the recording stops.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
94 Camera  
To zoom in or out, use the zoom keys.  
4
To stop recording, press the capture key. The video clip is automatically saved  
in Gallery.  
Video recording on-screen controls and indicators  
The video viewfinder displays the following:  
1
2
3
4
5
6
7
Capture mode indicator  
Audio mute on indicator  
Capture icon. Tap to record video.  
Video light on/off.  
Recording settings. Tap to change settings.  
Battery charge level indicator  
Video quality indicator. To change this setting, select Options >Settings >  
Video quality.  
8
9
Video clip file type  
Available recording time. When you are recording, the current video length  
indicator also shows the elapsed and remaining time.  
10 The location to which the video clip is saved.  
After recording a video clip  
After you record a video clip, select from the following options (available only if you  
have selected Options >Settings >Show last captured video >Yes):  
— Play the video clip you just recorded.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Positioning (GPS) 95  
— Post your video clip to compatible online sharing services.  
— Delete the video clip.  
To send the video clip to the person you are talking to, select Options >Send to  
caller during a call.  
To return to the viewfinder to record a new video clip, press the capture key.  
Positioning (GPS)  
About GPS  
The Global Positioning System (GPS) is operated by the government of the United  
States, which is solely responsible for its accuracy and maintenance. The accuracy  
of location data can be affected by adjustments to GPS satellites made by the United  
States government and is subject to change with the United States Department of  
Defense civil GPS policy and the Federal Radionavigation Plan. Accuracy can also be  
affected by poor satellite geometry. Availability and quality of GPS signals may be  
affected by your location, buildings, natural obstacles, and weather conditions. GPS  
signals may not be available inside buildings or underground and may be impaired  
by materials such as concrete and metal.  
GPS should not be used for precise location measurement, and you should never  
rely solely on location data from the GPS receiver and cellular radio networks for  
positioning or navigation.  
The trip meter has limited accuracy, and rounding errors may occur. Accuracy can  
also be affected by availability and quality of GPS signals.  
The coordinates in the GPS are expressed using the international WGS-84 coordinate  
system. The availability of the coordinates may vary by region.  
Assisted GPS (A-GPS)  
Your device also supports assisted GPS (A-GPS).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
96 Positioning (GPS)  
A-GPS is a network service.  
Assisted GPS (A-GPS) is used to retrieve assistance data over a packet data  
connection, which assists in calculating the coordinates of your current location  
when your device is receiving signals from satellites.  
When you activate A-GPS, your device receives useful satellite information from an  
assistance data server over the cellular network. With the help of assisted data, your  
device can obtain the GPS position faster.  
Your device is preconfigured to use the Nokia A-GPS service, if no service provider-  
specific A-GPS settings are available. The assistance data is retrieved from the Nokia  
A-GPS service server only when needed.  
You must have an internet access point defined in the device to retrieve assistance  
data from the Nokia A-GPS service over a packet data connection. To define an access  
point for A-GPS, select Menu >Applications >Location and Positioning >  
Positioning server >Access point. A wireless LAN (WLAN) access point cannot be  
used for this service. Only a packet data internet access point can be used. Your  
device asks for the internet access point when GPS is used for the first time.  
Hold your device correctly  
When using the GPS receiver, ensure you do not cover the antenna with your hand.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Positioning (GPS) 97  
Establishing a GPS connection may take from a couple of seconds to several minutes.  
Establishing a GPS connection in a vehicle may take longer.  
The GPS receiver draws its power from the device battery. Using the GPS receiver  
may drain the battery faster.  
Tips on creating a GPS connection  
Check the satellite signal status  
Select Menu >Applications >Location and GPS data >Options >Satellite  
status.  
If your device has found satellites, a bar for each satellite is shown in the satellite  
information view. The longer the bar, the stronger the satellite signal. When your  
device has received enough data from the satellite signal to calculate your location,  
the colour of the bar changes.  
Initially your device must receive signals from at least four satellites to be able to  
calculate your location. When the initial calculation has been made, it may be  
possible to continue calculating your location with three satellites. However, the  
accuracy is generally better when more satellites are found.  
If no satellite signal can be found, consider the following:  
If you are indoors, go outdoors to receive a better signal.  
If you are outdoors, move to a more open space.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
98 Positioning (GPS)  
If the weather conditions are bad, the signal strength may be affected.  
Some vehicles have tinted (athermic) windows, which may block the satellite  
signals.  
Ensure you do not cover the antenna with your hand.  
Establishing a GPS connection may take from a couple of seconds to several minutes.  
Establishing a GPS connection in a vehicle may take longer.  
The GPS receiver draws its power from the device battery. Using GPS may drain the  
battery faster.  
Position requests  
You may receive a request from a network service to receive your position  
information. Service providers may offer information about local topics, such as  
weather or traffic conditions, based on the location of your device.  
When you receive a position request, the service that is making the request is  
displayed. Select Accept to allow your position information to be sent or Reject to  
deny the request.  
Landmarks  
With Landmarks, you can save the position information of locations in your  
device. You can sort the saved locations into different categories, such as business,  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Positioning (GPS) 99  
and add details to them. You can use your saved landmarks in compatible  
applications.  
Select Menu >Applications >Location and Landmarks.  
Select Options and from the following:  
New landmark — Create a new landmark. To request position information of your  
current location, select Current position. To enter the position information  
manually, select Enter manually.  
Edit — Edit a saved landmark (for example, add a street address).  
Add to category — Add a landmark to a category. Select each category to which  
you want to add the landmark.  
Send — Send one or several landmarks to a compatible device.  
Create a new landmark category  
On the categories tab, select Options >Edit categories.  
GPS data  
GPS data is designed to provide route guidance information to a selected  
destination and traveling information, such as the approximate distance to the  
destination and approximate duration of travel. You can also view position  
information about your current location.  
Select Menu >Applications >Location and GPS data.  
Positioning settings  
Positioning settings define the methods, server, and notation settings used in  
positioning.  
Select Menu >Applications >Location and Positioning.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
100 Positioning (GPS)  
Define positioning methods  
Use only the integrated GPS receiver of your device  
Select Integrated GPS.  
Use Assisted GPS (A-GPS) to receive assistance data from a positioning server  
Select Assisted GPS.  
Use information from the cellular network (network service)  
Select Network based.  
Define positioning server  
Define an access point and positioning server for network-assisted  
positioning  
Select Positioning server.  
This is used for assisted GPS or network-based positioning. The positioning server  
may be preset by your service provider, and you may not be able to edit the settings.  
Define notation settings  
Select the measurement system to use for speeds and distances  
Select Measurement system >Metric or Imperial.  
Define in which format the coordinate information is displayed in your device  
Select Coordinate format and the desired format.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maps 101  
Maps  
Maps overview  
Select Menu >Maps.  
Welcome to Maps.  
Maps shows you what is nearby, helps you plan your route, and guides you where  
you want to go.  
Find cities, streets, and services.  
Find your way with turn-by-turn directions.  
Synchronise your favourite locations and routes between your mobile device  
and the Ovi Maps internet service.  
Check weather forecasts and other local information, if available.  
Note: Downloading content such as maps, satellite images, voice files, guides  
or traffic information may involve transmission of large amounts of data (network  
service).  
Some services may not be available in all countries, and may be provided only in  
selected languages. The services may be network dependent. For more information,  
contact your network service provider.  
Almost all digital cartography is inaccurate and incomplete to some extent. Never  
rely solely on the cartography that you download for use in this device.  
Content such as satellite images, guides, weather and traffic information and  
related services are generated by third parties independent of Nokia. The content  
may be inaccurate and incomplete to some extent and is subject to availability.  
Never rely solely on the aforementioned content and related services.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
102 Maps  
View your location and the map  
See your current location on the map, and browse maps of different cities and  
countries.  
Select Menu >Maps and My position.  
marks your current position, if available. When your device is searching for your  
position,  
blinks. If your position is not available,  
indicates your last known  
position.  
If only cell ID based positioning is available, a red halo around the positioning icon  
indicates the general area you might be in. In densely populated areas, the accuracy  
of the estimate increases, and the red halo is smaller than in lightly populated areas.  
Move on the map  
Drag the map with your finger. By default, the map is oriented north.  
View your current or last known location  
Select  
.
Zoom in or out  
Select + or -.  
If you browse to an area not covered by the maps that are stored on your device  
and you have an active data connection, new maps are automatically downloaded.  
Map coverage varies by country and region.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Maps 103  
Map view  
1
2
3
4
Selected location  
Indicator area  
Point of interest (for example, a railway station or a museum)  
Information area  
Change the look of the map  
View the map in different modes, to easily identify where you are.  
Select Menu >Maps and My position.  
Select  
and from the following:  
Map view — In the standard map view, details such as location names or motorway  
numbers, are easy to read.  
Satellite view — For a detailed view, use satellite images.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
104 Maps  
Terrain view — View at a glance the ground type, for example, when you are  
travelling off-road.  
3D view — For a more realistic view, change the perspective of the map.  
Landmarks — Display prominent buildings and attractions on the map.  
Night mode — Dim the colours of the map. When travelling at night, the map is  
easier to read in this mode.  
Download and update maps  
To avoid mobile data transfer costs, download the latest maps and voice guidance  
files to your computer, and then transfer and save them to your device.  
Use the Nokia Ovi Suite application to download the latest maps and voice guidance  
files to your compatible computer. To download and install Nokia Ovi Suite on your  
compatible computer, go to www.ovi.com.  
Tip: Save new maps to your device before a journey, so you can browse the maps  
without an internet connection when travelling abroad.  
To make sure your device does not use an internet connection, in the main menu,  
select  
>Internet >Connection >Offline.  
About positioning methods  
Maps displays your location on the map using GPS, A-GPS, WLAN, or cell ID based  
positioning.  
The Global Positioning System (GPS) is a satellite-based navigation system used for  
calculating your location. Assisted GPS (A-GPS) is a network service that sends you  
GPS data, improving the speed and accuracy of the positioning.  
Wireless local area network (WLAN) positioning improves position accuracy when  
GPS signals are not available, especially when you are indoors or between tall  
buildings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Maps 105  
With cell ID based positioning, the position is determined through the antenna  
tower your mobile device is currently connected to.  
Depending on the available positioning method, the accuracy of positioning may  
vary from a few metres to several kilometres.  
When you use Maps for the first time, you are prompted to define the internet access  
point to use to download map information, use A-GPS, or connect to a WLAN.  
The Global Positioning System (GPS) is operated by the government of the United  
States, which is solely responsible for its accuracy and maintenance. The accuracy  
of location data can be affected by adjustments to GPS satellites made by the United  
States government and is subject to change with the United States Department of  
Defense civil GPS policy and the Federal Radionavigation Plan. Accuracy can also be  
affected by poor satellite geometry. Availability and quality of GPS signals may be  
affected by your location, buildings, natural obstacles, and weather conditions. GPS  
signals may not be available inside buildings or underground and may be impaired  
by materials such as concrete and metal.  
GPS should not be used for precise location measurement, and you should never  
rely solely on location data from the GPS receiver and cellular radio networks for  
positioning or navigation.  
The trip meter has limited accuracy, and rounding errors may occur. Accuracy can  
also be affected by availability and quality of GPS signals.  
Note: Using WLAN may be restricted in some countries. For example, in  
France, you are only allowed to use WLAN indoors. For more information, contact  
your local authorities.  
Find a location  
Maps helps you find specific locations and businesses.  
Select Menu >Maps and Search.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
106 Maps  
1
Select the search field, and enter search words, such as a street address or  
postcode.  
Select  
2
3
. To clear the search field, select  
.
Select an item from the list of proposed matches.  
The location is displayed on the map. To view the other locations of the search  
result list on the map, select one of the arrows beside the information area  
(
).  
Return to the list of proposed matches  
Select List.  
Search for different types of nearby places  
Select Browse categories and a category, such as shopping, accommodation, or  
transport.  
If no search results are found, ensure the spelling of your search terms is correct.  
Problems with your internet connection may also affect results when searching  
online.  
To avoid data transfer costs, you can also get search results without an active  
internet connection, if you have maps of the searched area stored on your device.  
View location details  
View more information about a specific location or place, such as a hotel or  
restaurant, if available.  
Select Menu >Maps and My position.  
View the details of a place  
Select a place, its information area ( ), and Show details.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Maps 107  
Rate a place  
Select a place, its information area ( ), Show details, and the star rating. For  
example, to rate a place as being 3 out of 5 stars, select the third star. To rate a  
place, you need an active internet connection.  
When you find a place that does not exist or contains inappropriate information or  
incorrect details, such as the wrong contact information or location, it is  
recommended that you report it to Nokia.  
Report incorrect information  
Select a place and its information area ( ), and select Show details >Report this  
Place and the appropriate option. To report a place, you need an active internet  
connection.  
The available options may vary.  
Save places and routes  
Save addresses, places of interest, and routes, so they can be quickly used later.  
Select Menu >Maps.  
Save a place  
1
2
3
4
Select My position.  
Tap the location. To search for an address or place, select Search.  
Tap the location's information area ( ).  
Select Save place.  
Save a route  
1
2
3
Select My position.  
Tap the location. To search for an address or place, select Search.  
Tap the location's information area ( ).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
108 Maps  
4
5
6
To add another route point, select Add to route.  
Select Add new route point and the appropriate option.  
Select Show route >Options >Save route.  
View your saved places and routes  
Select Favourites >Places or Routes.  
View and organise places or routes  
Use your Favourites to quickly access the places and routes you have saved.  
Group the places and routes into a collection, for example, when planning a trip.  
Select Menu >Maps and Favourites.  
View a saved place on the map  
1
2
3
Select Places.  
Go to the place.  
Select Show on map.  
To return to the list of saved places, select List.  
Create a collection  
Select Create new collection, and enter a collection name.  
Add a saved place to a collection  
1
2
3
Select Places and the place.  
Select Organise collections.  
Select New collection or an existing collection.  
If you need to delete routes, go to the Ovi Maps internet service at www.ovi.com.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Maps 109  
Send places to your friends  
When you want to share place information with your friends, send these details  
directly to their devices.  
Select Menu >Maps and My position.  
Send a place to your friend's compatible device  
Select a location on the map, tap the location's information area ( ), and select  
Send.  
Synchronise your Favourites  
Plan a trip on your computer at the Ovi Maps website, synchronise the saved places  
and routes with your mobile device, and access the plan on the go.  
To synchronise places or routes between your mobile device and the Ovi Maps  
internet service, you need to be signed in to your Nokia account.  
Synchronise saved places and routes  
Select Favourites >Synchronise with Ovi. If you do not have a Nokia account, you  
are prompted to create one.  
You can set your device to synchronise your Favourites automatically when you  
open or close the Maps application.  
Synchronise Favourites automatically  
Select  
>Synchronisation >Synchronisation >At start-up and shut-d..  
Synchronising requires an active internet connection, and may involve the  
transmission of large amounts of data through your service provider’s network. For  
information about data transmission charges, contact your service provider.  
To use the Ovi Maps internet service, go to www.ovi.com.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
110 Maps  
Get voice guidance  
Voice guidance, if available for your language, helps you find your way to a  
destination, leaving you free to enjoy the journey.  
Select Menu >Maps and Drive or Walk.  
When you use drive or walk navigation for the first time, you are asked to select the  
language of the voice guidance, and download the appropriate files.  
If you select a language that includes street names, also the street names are said  
aloud. Voice guidance may not be available for your language.  
Change the voice guidance language  
In the main view, select  
and Navigation >Drive guidance or Walk guidance  
and the appropriate option.  
Deactivate voice guidance  
In the main view, select  
and Navigation >Drive guidance or Walk guidance  
and None.  
Repeat the voice guidance for car navigation  
In the navigation view, select Options >Repeat.  
Adjust the volume of the voice guidance for car navigation  
In the navigation view, select Options >Volume.  
Drive to your destination  
When you need turn-by-turn directions while driving, Maps helps you get to your  
destination.  
Select Menu >Maps and Drive.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Maps 111  
Drive to a destination  
Select Set destination and the appropriate option.  
Drive to your home  
Select Drive home.  
When you select Drive home or Walk home for the first time, you are prompted  
to define your home location. To later change the home location, do the following:  
1
2
3
In the main view, select  
.
Select Navigation >Home Location >Redefine.  
Select the appropriate option.  
Tip: To drive without a set destination, select Map. Your location is displayed on  
the centre of the map as you move.  
Change views during navigation  
Swipe the screen to select 2D view, 3D view, Arrow view, or Route overview.  
Obey all local laws. Always keep your hands free to operate the vehicle while driving.  
Your first consideration while driving should be road safety.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
112 Maps  
Navigation view  
1
2
3
4
Route  
Your location and direction  
Compass  
Information bar (speed, distance, time)  
Get traffic and safety information  
Enhance your driving experience with real-time information about traffic events,  
lane assistance, and speed limit warnings, if available for your country or region.  
Select Menu >Maps and Drive.  
View traffic events on the map  
During drive navigation, select Options >Traffic info. The events are displayed as  
triangles and lines.  
Update traffic information  
Select Options >Traffic info >Update traffic info.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Maps 113  
When planning a route, you can set the device to avoid traffic events, such as traffic  
jams or roadworks.  
Avoid traffic events  
In the main view, select  
>Navigation >Reroute due to traffic.  
Warning:  
The location of speed/safety cameras can be shown on your route during  
navigation, if this feature is enabled. Some jurisdictions prohibit or regulate the use  
of speed/safety camera location data. Nokia is not responsible for the accuracy, or  
the consequences of use of speed/safety camera location data.  
Walk to your destination  
When you need directions to follow a route on foot, Maps guides you over squares,  
and through parks, pedestrian zones, and even shopping centres.  
Select Menu >Maps and Walk.  
Walk to a destination  
Select Set destination and the appropriate option.  
Walk to your home  
Select Walk home.  
When you select Drive home or Walk home for the first time, you are prompted  
to define your home location. To later change the home location, do the following:  
1
2
3
In the main view, select  
.
Select Navigation >Home Location >Redefine.  
Select the appropriate option.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
114 Maps  
Tip: To walk without a set destination, select Map. Your location is displayed on  
the centre of the map as you move.  
Plan a route  
Plan your journey, and create your route and view it on the map before setting off.  
Select Menu >Maps and My position.  
Create a route  
1
Tap the location of your starting point. To search for an address or place, select  
Search.  
2
3
4
Tap the location's information area ( ).  
Select Add to route.  
To add another route point, select Add new route point and the appropriate  
option.  
Change the order of the route points  
1
2
3
Select a route point.  
Select Move.  
Tap the place where you want to move the route point to.  
Edit the location of a route point  
Tap the route point, and select Edit and the appropriate option.  
View the route on the map  
Select Show route.  
Navigate to the destination  
Select Show route >Options >Start driving or Start walking.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connectivity 115  
Change the settings for a route  
The route settings affect the navigation guidance and the way the route is displayed  
on the map.  
1
2
3
In the route planner view, open the Settings tab. To get to the route planner  
view from the navigation view, select Options >Route points or Route point  
list.  
Set the transportation mode to Drive or Walk. If you select Walk, one-way  
streets are regarded as normal streets, and walkways and routes through, for  
example, parks and shopping centres, can be used.  
Select the desired option.  
Select the walking mode  
Open the Settings tab, and select Walk >Preferred route >Streets or Straight  
line. Straight line is useful on off-road terrain as it indicates the walking direction.  
Use the faster or shorter driving route  
Open the Settings tab, and select Drive >Route selection >Faster route or  
Shorter route.  
Use the optimised driving route  
Open the Settings tab, and select Drive >Route selection >Optimised. The  
optimised driving route combines the advantages of both the shorter and the faster  
routes.  
You can also choose to allow or avoid using, for example, motorways, toll roads, or  
ferries.  
Connectivity  
Your device offers several options to connect to the internet or to another  
compatible device or PC.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
116 Connectivity  
Data connections and access points  
Your device supports packet data connections (network service), such as GPRS in  
the GSM network. When you use your device in GSM and 3G networks, multiple data  
connections can be active at the same time, and access points can share a data  
connection. In the 3G network, data connections remain active during voice calls.  
You can also use a WLAN data connection. Only one connection in one wireless LAN  
can be active at a time, but several applications can use the same internet access  
point.  
To establish a data connection, an access point is required. You can define different  
kinds of access points, such as the following:  
MMS access point to send and receive multimedia messages  
Internet access point (IAP) to send and receive e-mail and connect to the  
internet  
Check the type of access point you need with your service provider for the service  
you want to access. For availability and subscription to packet data connection  
services, contact your service provider.  
Network settings  
Select Menu >Settings and Connectivity >Network.  
Your device can automatically switch between GSM and UMTS networks. GSM  
networks are indicated with . UMTS networks are indicated with  
Select from the following:  
.
Network mode — Select which network to use. If you select Dual mode, the device  
uses the GSM or UMTS network automatically, according to the network parameters  
and the roaming agreements between the wireless service providers. For details  
and roaming costs, contact your network service provider. This option is shown only  
if supported by the wireless service provider.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Connectivity 117  
A roaming agreement is an agreement between two or more service providers to  
enable the users of one service provider to use the services of other service  
providers.  
Operator selection — Select Automatic to set the device to search for and select  
one of the available networks, or Manual to manually select the network from a  
list. If the connection to the manually selected network is lost, the device sounds  
an error tone and asks you to reselect a network. The selected network must have  
a roaming agreement with your home network.  
Cell info display — Set the device to indicate when it is used in a cellular network  
based on microcellular network (MCN) technology and to activate cell info reception.  
Wireless LAN  
Your device can detect and connect to wireless local area networks (WLAN). Using  
a WLAN, you can connect your device to the internet and compatible devices that  
have WLAN support.  
About WLAN  
Your device can detect and connect to wireless local area networks (WLAN). Using  
a WLAN, you can connect your device to the internet and compatible devices that  
support WLAN.  
To use a WLAN connection, you need the following:  
WLAN must be available in your location.  
Your device must be connected to the WLAN. Some WLANs are protected, and  
you need an access key from the service provider to connect to them.  
An internet access point created for WLAN. Use the access point for applications  
that need to connect to the internet.  
A WLAN connection is established when you create a data connection using a WLAN  
internet access point. The active WLAN connection ends when you end the data  
connection.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
118 Connectivity  
You can use WLAN during a voice call or when packet data is active. You can only be  
connected to one WLAN access point device at a time, but several applications can  
use the same access point.  
Features that use WLAN, or that are allowed to run in the background while using  
other features, increase the demand on battery power and reduce the battery life.  
Your device supports the following WLAN features:  
IEEE 802.11b/g standard  
Operation at 2.4 GHz  
WEP, WPA/WPA2, and 802.1x authentication methods. These functions can be  
used only if they are supported by the network.  
Important: Always enable one of the available encryption methods to  
increase the security of your wireless LAN connection. Using encryption reduces the  
risk of unauthorised access to your data.  
When the device is in the offline profile, you can still use WLAN, if available.  
Remember to comply with any applicable safety requirements when establishing  
and using a WLAN connection.  
Tip: To check the unique media access control (MAC) address that identifies your  
device, open the dialler, and enter *#62209526#.  
Note: Using WLAN may be restricted in some countries. For example, in  
France, you are only allowed to use WLAN indoors. For more information, contact  
your local authorities.  
WLAN wizard  
Select Menu >Settings and Connectivity >Wireless LAN.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connectivity 119  
The WLAN wizard helps you to connect to a wireless LAN (WLAN) and manage your  
WLAN connections.  
If the search finds WLANs, to create an internet access point (IAP) for a connection  
and start the web browser using this IAP, select the connection and Start web  
browsing.  
If you select a secured WLAN, you are asked to enter the relevant password. To  
connect to a hidden network, you must enter the correct network name (service set  
identifier, SSID).  
If you already have the web browser running using the currently active WLAN  
connection, to return to the web browser, select Continue web browsing.  
To end the active connection, select the connection and Disconnect WLAN.  
WLAN internet access points  
Select Menu >Settings and Connectivity >Wireless LAN >Options.  
Select from the following:  
Filter WLAN networks — Filter out wireless LANs (WLANs) from the list of found  
networks. The selected networks are not displayed the next time the application  
searches for WLANs.  
Details — View the details of a network shown in the list. If you select an active  
connection, the connection details are displayed.  
Operating modes  
There are two operating modes in WLAN: infrastructure and ad hoc.  
The infrastructure operating mode allows two kinds of communication: wireless  
devices are connected to each other through a WLAN access point device, or wireless  
devices are connected to a wired LAN through a WLAN access point device.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
120 Connectivity  
In the ad hoc operating mode, devices can send and receive data directly with each  
other.  
Wireless LAN settings  
Select Menu >Settings and Connectivity >Wireless LAN >Options >  
Settings.  
Select from the following:  
Show WLAN availability — Select whether is displayed when a wireless LAN  
(WLAN) is available.  
Tip: To access the WLAN Wizard application and view the available options, select  
the WLAN icon, and in the pop-up window, select the highlighted text next to the  
WLAN icon.  
Scan for networks — If you set Show WLAN availability to Yes, you can select  
how often the device searches for available WLANs and updates the indicator.  
Internet connectivity test — Select whether you want the device to test the  
internet capability of the selected WLAN automatically, to ask for permission every  
time, or to never perform the connectivity test. If you select Run automatically or  
allow the test to be performed when the device asks for it, and the connectivity test  
is performed successfully, the access point is saved to the internet destinations.  
To view advanced settings, select Options >Advanced settings. Changing the  
advanced settings for the WLAN is not recommended.  
Access points  
Create a new access point  
Select Menu >Settings and Connectivity >Destinations.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Connectivity 121  
You may receive access point settings in a message from a service provider. Some  
or all access points may be preset for your device by your service provider, and you  
may not be able to change, create, edit, or remove them.  
1
2
Select Access point.  
The device asks to check for available connections. After the search, connections  
that are already available are shown and can be shared by a new access point.  
If you skip this step, you are asked to select a connection method and to define  
the settings needed.  
To view access points stored in your device, select an access point group. The  
different access point groups are the following:  
Internet access points  
Multimedia messaging access points  
WAP access points  
Uncategorised access points  
The different access point types are indicated with the following:  
Protected access point  
Packet data access point  
Wireless LAN (WLAN) access point  
Manage access point groups  
To avoid selecting a single access point every time the device makes a network  
connection, you can create a group that contains various access points to connect  
to that network and define the order in which the access points are used. For  
example, you can add wireless LAN (WLAN) and packet data access points to an  
internet access point group, and use the group for browsing the web. If you give  
WLAN the highest priority, the device connects to the internet through WLAN, if  
available, and through a packet data connection if not.  
Select Menu >Settings and Connectivity >Destinations.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
122 Connectivity  
Create a new access point group  
Select Options >Manage >New destination.  
Add access points to an access point group  
Select the group and Options >New access point.  
Copy an existing access point from another group  
Select the group, go to the access point to copy, and select Options >Organise >  
Copy to other dest..  
Change the priority of an access point within a group  
Select Options >Organise >Change priority.  
Packet data access point settings  
Select Menu >Settings and Connectivity >Destinations >Access point, and  
follow the instructions.  
Edit a packet data access point  
Select an access point group and access point marked with  
instructions from your service provider.  
. Follow the  
Select from the following:  
Access point name — The access point name is provided by your service provider.  
User name — The user name may be needed to make a data connection, and is  
usually provided by your service provider.  
Prompt password — If you must enter the password every time you log in to a  
server, or if you do not want to save your password in the device, select Yes.  
Password — A password may be needed to make a data connection, and is usually  
provided by your service provider.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connectivity 123  
Authentication — To always send your password encrypted, select Secure. To  
send your password encrypted when possible, select Normal.  
Homepage — Depending on the access point you are setting up, enter the web  
address or the address of the multimedia message centre.  
Use access point — Set the device to connect to the destination using this access  
point after confirmation or automatically.  
Modify advanced packet data access point settings  
Select Options >Advanced settings.  
Select from the following:  
Network type — Select the internet protocol type to transfer data to and from  
your device. The other settings depend on the selected network type.  
Phone IP address (for IPv4 only) — Enter the IP address of your device.  
DNS addresses — Enter the IP addresses of the primary and secondary DNS servers,  
if required by your service provider. To obtain these addresses, contactyour internet  
service provider.  
Proxy server address — Enter the address of the proxy server.  
Proxy port number — Enter the port number of the proxy server.  
WLAN access point settings  
Select Menu >Settings and Connectivity >Destinations >Access point, and  
follow the instructions.  
Edit a wireless LAN (WLAN) access point  
Select an access point group and access point marked with . Follow the  
instructions from your WLAN service provider.  
Select from the following:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
124 Connectivity  
WLAN network name — Select Enter manually or Search for networks. If you  
select an existing network, the WLAN network mode and WLAN security mode are  
determined by the settings of its access point device.  
Network status — Define whether the network name is displayed.  
WLAN network mode — Select Ad-hoc to create an ad hoc network and to allow  
devices to send and receive data directly; a WLAN access point device is not needed.  
In an ad hoc network, all devices must use the same WLAN network name.  
WLAN security mode — Select the encryption used: WEP, 802.1x, orWPA/WPA2  
(802.1x and WPA/WPA2 are not available for ad hoc networks). If you select Open  
network, no encryption is used. The WEP, 802.1x and WPA functions can be used  
only if the network supports them.  
Homepage — Enter the web address of the starting page.  
Use access point — Set the device to create a connection using this access point  
automatically or after confirmation.  
The available options may vary.  
Security settings for WEP  
Define the WEP security settings if you have selected the wired equivalent privacy  
(WEP) as the WLAN security mode.  
1
2
Select Menu >Settings and Connectivity >Destinations.  
Select the access point group that has the desired WLAN access point, and select  
the access point.  
You can also define WEP settings when creating a new WLAN access point.  
Select WLAN security mode >WEP.  
3
4
Select WLAN security settings, and define the following:  
WEP key in use — Select the wired equivalent privacy (WEP) key number. You  
can create up to four WEP keys. The same settings must be entered on the WLAN  
access point device.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connectivity 125  
Authentication type — Select Open or Shared for the authentication type  
between your device and the WLAN access point device.  
WEP key settings — Enter WEP encryption (length of the key), WEP key  
format (ASCII or Hexadecimal), and WEP key (the WEP key data in the selected  
format).  
Security settings for 802.1x and WPA/WPA2  
Define the 802.1x or WPA/WPA2 security settings if you have selected either as the  
WLAN security mode.  
1
2
Select Menu >Settings and Connectivity >Destinations.  
Open the access point group that has the desired WLAN access point, and select  
the access point.  
You can also define 802.1x or WPA/WPA2 settings when creating a new WLAN  
access point.  
3
4
Select WLAN security mode >WPA/WPA2 or 802.1x.  
Select WLAN security settings >WPA/WPA2 >EAP to use an extensible  
authentication protocol (EAP) plug-in, or Pre-shared key to use a password.  
The same password must be entered on the WLAN access point device.  
If you selected EAP, define the EAP plug-in settings according to the instructions  
from your service provider.  
Connections in WPA2 only mode are applicable to WPA2 enabled devices only.  
The available options may vary.  
Advanced WLAN settings  
1
2
Select Menu >Settings and Connectivity >Destinations.  
Open the access point group that has the desired WLAN access point, and select  
the WLAN access point.  
You can also define advanced WLAN settings when creating a new WLAN access  
point.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
126 Connectivity  
Select Options >Advanced settings, and define the following:  
3
IPv4 settings — Enter the IP address of your device, the subnet IP address, the  
default gateway, and the IP addresses of the primary and secondary DNS servers.  
For these addresses, contact your internet service provider.  
IPv6 settings — Define the type of DNS address.  
Ad-hoc channel (only for Ad-hoc) — To enter a channel number (1-11) manually,  
select User defined.  
Proxy server address — Enter the address for the proxy server.  
Proxy port number — Enter the proxy port number.  
The available options may vary.  
View your active data connections  
Select Menu >Settings and Connectivity >Connection mgr..  
In the active data connections view, you can see your data connections:  
data calls  
packet data connections  
WLAN connections  
Close a connection  
Select Options >Disconnect.  
Close all open connections  
Select Options >Disconnect all.  
View the details of a connection  
Select Options >Details.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connectivity 127  
Synchronisation  
With the Synchronisation application, you can synchronise your notes,  
messages, browser bookmarks, and contacts with compatible applications on a  
compatible PC or on the internet.  
Select Menu >Settings and Connectivity >Data transfer >Sync.  
You may receive synchronisation settings in a special message from your service  
provider.  
A synchronisation profile contains the necessary settings for synchronisation. When  
you open the application, the default or previously used synchronisation profile is  
displayed.  
Create a new synchronisation profile  
Select Options >New sync profile.  
Define the features included in the synchronisation profile  
Select a synchronisation item to include it in the profile or to leave it out.  
Manage synchronisation profiles  
Select Options and the desired option.  
Synchronise data  
Select Options >Synchronise.  
Bluetooth connectivity  
About Bluetooth connectivity  
With Bluetooth connectivity, you can make a wireless connection to other  
compatible devices, such as mobile devices, computers, headsets, and car kits.  
You can use the connection to send items from your device, transfer files from your  
compatible PC, and print files with a compatible printer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
128 Connectivity  
Select Menu >Settings and Connectivity >Bluetooth.  
Since devices with Bluetooth wireless technology communicate using radio waves,  
they do not need to be in direct line-of-sight. However, they must be within 10  
metres (33 feet) of each other, although the connection may be subject to  
interference from obstructions such as walls or from other electronic devices.  
This device is compliant with Bluetooth Specification 2.0 + EDR supporting the  
following profiles: generic access, network access, control, hands-free, headset,  
object push, file transfer, dial-up networking, SIM access, and serial port. To ensure  
interoperability between other devices supporting Bluetooth technology, use Nokia  
approved accessories for this model. Check with the manufacturers of other devices  
to determine their compatibility with this device.  
When the device is locked, only connections to authorised devices are possible.  
Features using Bluetooth technology increase the demand on battery power and  
reduce the battery life.  
Bluetooth settings  
Select Menu >Settings and Connectivity >Bluetooth.  
Select from the following:  
Bluetooth — Activate Bluetooth connectivity.  
My phone's visibility — To allow your device to be visible to other Bluetooth  
devices, select Shown to all. To set a length of time, after which the visibility is set  
from shown to hidden, select Set visibility period. To hide your device from other  
devices, select Hidden.  
My phone's name — Edit the name of your device. The name is shown to other  
Bluetooth devices.  
Remote SIM mode — Allow another device, such as a compatible car kit accessory,  
to use the SIM card in your device to connect to the network.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connectivity 129  
Security tips  
Select Menu >Settings and Connectivity >Bluetooth.  
When you are not using Bluetooth connectivity, to control who can find your device  
and connect to it, select Bluetooth >Off or My phone's visibility >Hidden.  
Deactivating the Bluetooth function does not affect other functions in your device.  
Do not pair with or accept connection requests from an unknown device. This helps  
to protect your device from harmful content. Operating the device in hidden mode  
is a safer way to avoid malicious software.  
Send data using Bluetooth connectivity  
You can have several Bluetooth connections active at a time. For example, if you are  
connected to acompatible headset, youcanalso transfer files to another compatible  
device.  
1
2
Open the application where the item you want to send is stored.  
Go to an item, and select Options >Send >Via Bluetooth.  
Devices with Bluetooth wireless technology that are within range are displayed.  
Device icons are as follows:  
computer  
phone  
audio or video device  
other device  
To interrupt the search, select Cancel.  
3
4
Select the device with which you want to connect.  
If the other device requires pairing before data can be transmitted, a tone  
sounds, and you are asked to enter a passcode. The same passcode must be  
entered in both devices.  
When the connection is established, Sending data is displayed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
130 Connectivity  
Tip: When searching for devices, some devices may show only the unique address  
(device address). To find the unique address of your device, in the home screen,  
enter *#2820#.  
Pair devices  
You can pair your device with a compatible device to make subsequent Bluetooth  
connections between the devices quicker. Before pairing, create your own passcode  
(1 to 16 digits), and agree with the owner of the other device to use the same code.  
Devices that do not have a user interface have a factory-set passcode. The passcode  
is used only once.  
Select Menu >Settings and Connectivity >Bluetooth.  
1
Open the Paired devices tab.  
2
Select Options >New paired device. Devices that are within range are  
displayed.  
3
4
Select the device.  
Enter the passcode on both devices.  
indicates a paired device in the device search view.  
Connect to an accessory after pairing  
Select Options >Connect to audio device. Some audio accessories connect  
automatically to your device after pairing.  
Set a device as authorised  
Select Set as authorised. Connections between your device and the authorised  
device can be made without your knowledge. Use this only for your own devices,  
such as your compatible headset or PC, or devices that belong to someone you trust.  
indicates authorised devices in the paired devices view.  
Cancel a pairing with a device  
Select Options >Delete.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connectivity 131  
Cancel all pairings  
Select Options >Delete all.  
Receive data using Bluetooth connectivity  
When you receive data using Bluetooth connectivity, a tone sounds, and the device  
asks you if you want to accept the message. If you accept,  
is displayed, and  
you can find an informative message about the data in the Inbox folder in  
Messaging. The received data is automatically saved to the device memory.  
Messages received using Bluetooth connectivity are indicated with  
.
Block devices  
You can prevent devices from establishing a Bluetooth connection to your device.  
Select Menu >Settings and Connectivity >Bluetooth.  
Block a device  
On the Paired devices tab, go to a device you want to block, and select Options >  
Block.  
Unblock a device  
On the Blocked devices tab, go to a device, and select Options >Delete.  
Unblock all blocked devices  
Select Options >Delete all.  
If you reject a pairing request from another device, you are asked if you want to  
block all future connection requests from this device. If you accept the query, the  
device is added to the list of blocked devices.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
132 Connectivity  
Remote SIM mode  
With remote SIM mode, you can use a compatible car kit accessory. Before remote  
SIM mode can be activated, the two devices must be paired and the pairing initiated  
from the other device. When pairing, use a 16-digit passcode, and set the other  
device as authorised.  
Select Menu >Settings and Connectivity >Bluetooth.  
Activate remote SIM mode  
1
2
3
Activate Bluetooth connectivity. Select Bluetooth.  
Activate remote SIM mode in your device. Select Remote SIM mode.  
Activate remote SIM mode in the other device.  
When remote SIM mode is activated, Remote SIM mode is displayed in the home  
screen. The connection to the wireless network is closed, and you cannot use SIM  
card services or features that require cellular network coverage.  
When your device is in remote SIM mode, you can only make or receive calls using  
the connected accessory. Your device can only make calls to the emergency numbers  
programmed into your device.  
Deactivate remote SIM mode  
Press the power key, and select Exit remote SIM mode.  
Transfer data using a USB cable  
Select Menu >Settings and Connectivity >USB.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Connectivity 133  
Select the USB mode every time a compatible data cable is connected  
Select Ask on connection >Yes.  
If the Ask on connection option is not active, or you want to change the USB mode  
during an active connection, select USB connection mode and from the following:  
Nokia Ovi Suite — Use Nokia PC applications, such as Nokia Ovi Suite or Nokia  
Software Updater.  
Mass storage — Transfer data between your device and a compatible PC.  
Image transfer — Print images using a compatible printer.  
Media transfer — Synchronise music with Nokia Music Player or Windows Media  
Player.  
PC connections  
You can use your mobile device with a variety of compatible PC connectivity and  
data communications applications. With Nokia Ovi Suite you can, for example,  
transfer files and images between your device and a compatible computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
134 Connectivity  
To use Ovi Suite with USB connection mode, select Nokia Ovi Suite.  
For more information about Ovi Suite, see the support area at www.ovi.com.  
Administrative settings  
Select Menu >Settings and Connectivity >Admin. settings.  
To set the online time for the data call connection, select Data call. The data call  
settings affect all access points that use a GSM data call.  
SIP settings  
Session Initiation Protocol (SIP) settings are needed for certain network services  
using SIP. You may receive the settings in a special text message from your service  
provider. You can view, delete, or create these setting profiles in SIP settings.  
Select Menu >Settings and Connectivity >Admin. settings >SIP settings.  
Access point name control  
With the access point name control service, you can restrict packet data connections  
and allow your device to use only certain packet data access points.  
Select Menu >Settings and Connectivity >Admin. settings >APN control.  
This setting is only available if your SIM card supports the access point control  
service.  
Activate the service, or set the allowed access points  
Select Options and the appropriate option.  
To modify the settings, you need to enter your PIN2 code. The code is provided by  
your service provider.  
Packet data settings  
Select Menu >Settings and Connectivity >Admin. settings >Packet data.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Nokia Video Centre 135  
The packet data settings affect all access points using a packet data connection.  
Open a packet data connection whenever the network is available  
Select Packet data connection >When available.  
It is quicker, for example, to send an e-mail, if the connection is always open. If  
there is no network coverage, the device periodically tries to open a packet data  
connection.  
Open a packet data connection only when needed  
Select Packet data connection >When needed.  
Every time you, for example, send an e-mail, the connection needs to be opened  
first.  
Use HSDPA (network service) in UMTS networks  
Select High speed packet access.  
You can use your device as a modem for your computer, to access the internet over  
a packet data connection.  
Define the access point to use when using your device as a modem  
Select Access point.  
Nokia Video Centre  
With Nokia Video Centre (network service), you can download and stream video  
clips over the air from compatible internet video services using a packet data or  
WLAN connection. You can also transfer video clips from a compatible PC to your  
device and view them in Video centre.  
Using packet data access points to download videos may involve the transmission  
of large amounts of data through your service provider's network. Contact your  
service provider for information about data transmission charges.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
136 Nokia Video Centre  
Your device may have predefined services.  
Service providers may provide free content or charge a fee. Check the pricing in the  
service or from the service provider.  
View and download video clips  
Select  
>
.
Connect to video services  
To connect to a service to install video services, select Add new services and the  
desired video service from the service catalogue.  
View a video clip  
To browse the content of installed video services, select Video feeds.  
The content of some video services is divided into categories. To browse video clips,  
select a category.  
To search for a video clip in the service, select Video search. Search may not be  
available in all services.  
To view information about the selected video clip, select Options >Video  
details.  
Some video clips can be streamed over the air, but others must be first downloaded  
to your device. To download a video clip, select Options >Download. Downloads  
continue in the background if you exit the application. The downloaded video clips  
are saved in My videos.  
To stream a video clip or view a downloaded one, select Options >Play.  
When the video clip is playing, to use the control keys for controlling the player, tap  
the screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Nokia Video Centre 137  
To adjust the volume, use the volume key.  
Warning:  
Continuous exposure to high volume may damage your hearing. Listen to music at  
a moderate level, and do not hold the device near your ear when the loudspeaker  
is in use.  
Schedule downloads  
Setting the application to download video clips automatically may involve the  
transmission of large amounts of data through your service provider's network. For  
information about data transmission charges, contact your service provider.  
To schedule an automatic download for video clips in a service, select a category  
and Options >Schedule downloads.  
Video centre automatically downloads new video clips daily at the time you define.  
To cancel scheduled downloads for a category, select Manual download as the  
download method.  
Video feeds  
Select  
>
.
The content of the installed video services is distributed using RSS feeds. To view  
and manage your feeds, select Video feeds.  
Select Options and from the following:  
Feed subscriptions — Check your current feed subscriptions.  
Feed details — View information about a video.  
Add feed — Subscribe to new feeds. Select Via Video directory to select a feed  
from the services in the video directory.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
138 Nokia Video Centre  
Refresh feeds — Refresh the content of all feeds.  
Manage account — Manage your account options for a particular feed, if available.  
To view the videos available in a feed, select a feed from the list.  
My videos  
My videos is a storage place for all video clips in the Video centre application. You  
can list downloaded video clips and video clips recorded with the device camera in  
separate views.  
1
To open a folder and view video clips, select the folder. When a video clip is  
playing, to use the control keys for controlling the player, tap the screen.  
2
To adjust the volume, press the volume key.  
Select Options and from the following:  
Resume download — Resume a paused or failed download.  
Cancel download — Cancel a download.  
Video details — View information about a video clip.  
Find — Find a video clip. Enter a search term that matches the file name.  
Memory status — View the amount of free and used memory.  
Sort by — Sort video clips. Select the desired category.  
Move and copy — Move or copy video clips. Select Copy or Move and the desired  
location.  
Transfer videos from your PC  
Transfer your own video clips to Video centre from compatible devices using a  
compatible USB data cable. Video centre displays only the video clips which are in  
a format supported by your device.  
1
To view your device on a PC as a mass memory device where you can transfer  
any data files, make the connection with a USB data cable.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Web browser 139  
2
3
4
Select Mass storage as the connection mode.  
Select the video clips you want to copy from your PC.  
Transfer the video clips to E:\My Videos in the mass memory of your device.  
The transferred video clips appear in the My videos folder in Video centre. Video  
files in other folders of your device are not displayed.  
Video centre settings  
In the Video centre main view, select Options >Settings and from the following:  
Video service selection — Select the video services that you want to appear in  
Video centre. You can also add, remove, edit, and view the details of a video service.  
You cannot edit preinstalled video services.  
Connection settings — To define the network destination used for the network  
connection, select Network connection. To select the connection manually each  
time Video centre opens a network connection, select Always ask.  
To set GPRS connection on or off, select Confirm GPRS usage.  
To set roaming on or off, select Confirm roaming.  
Parental control — Set an age limit to videos. The required password is the same  
as the device lock code. The factory setting for the lock code is 12345. In video-on-  
demand services, videos which have the same or a higher age limit than you have  
set, are hidden.  
Preferred memory — Select whether downloaded videos are saved in the device  
memory or in the mass memory.  
Thumbnails — Select whether to download and view thumbnail images in video  
feeds.  
Web browser  
With the web browser, you can view hypertext markup language (HTML) pages on  
the web as originally designed (network service). You can also browse web pages  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
140 Web browser  
that are designed specifically for mobile devices, and use extensible hypertext  
markup language (XHTML), or the wireless markup language (WML).  
To browsetheweb, you need tohave an internet access point defined in your device.  
Tip: To open the browser, select the media key ( ) to open the media bar, and  
select  
.
Browse the web  
With the Browser application, you can browse web pages.  
Select  
>
.
Go to a web page  
From the toolbar, select Go to web address, and enter a web address.  
Exit full screen mode to see control icons  
Select the arrow icon in the bottom right corner. By default, the browser goes back  
to full screen mode after a few seconds.  
Some web pages may contain material, such as video clips, that requires a large  
amount of memory to view. If your device runs out of memory while loading such  
a web page, the video clips are not displayed.  
Disable graphics to save memory and speed up downloading  
Select Options >Settings >Page >Load content >Text only.  
Refresh the content of the web page  
Select Options >Web page options >Reload.  
View snapshots of web pages you have visited  
Select Back. A list of pages you have visited during the current browsing session  
opens. This option is available if History list is activated in the browser settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Web browser 141  
Block or allow the automatic opening of multiple windows  
Select Options >Web page options >Block pop-ups or Allow pop-ups.  
Zoom in or out on a web page  
Tap the display twice quickly.  
Tip: To go to the home screen without exiting the Browser application or closing  
the connection, press the end key once.  
Browser toolbar  
The browser toolbar helps you select frequently used functions of the browser.  
From the toolbar, select from the following:  
Expand toolbar — Expand the toolbar to access more toolbar functions.  
Go to web address — Enter a new web address.  
Show zoom — Zoom in or out on the web page.  
To use the expanded toolbar, select  
Expand toolbar and from the following:  
Go to feeds — View your current feed subscriptions.  
Full screen — Switch to the full screen view.  
Subsc. feeds — View a list of available web feeds on the current web page, and  
subscribe to a web feed.  
Settings — Edit the settings.  
Save bkmrk. — Save the current web page as a bookmark.  
Reload — Refresh the web page.  
Overview — View an overview of the current web page.  
Homepage — Go to the homepage (if defined in the settings).  
Bookmarks — Open the bookmarks view.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
142 Web browser  
Find keywd. — Search on the current web page.  
Navigate pages  
When you are browsing a large web page, you can use Page overview to view the  
page at a glance.  
Select  
>
.
See an overview of a page  
1
Select  
Expand toolbar.  
2
3
4
Select Overview. A miniature image of the current web page opens.  
Move on the miniature image by dragging up, down. left, or right .  
Tap the section you want to view. The web page opens at that section.  
Web feeds and blogs  
Web feeds are XML files on web pages that are used to share, for example, the latest  
news headlines or blogs. Blogs or weblogs are web diaries. It is common to find  
web feeds on web, blog, and wiki pages.  
The web browser application automatically detects if a web page contains web  
feeds.  
To subscribe to a web feed, select a feed and Options >Subscribe to web feeds.  
To update a web feed, select a feed and Options >Refresh. You can also update  
web feeds from the Contacts bar.  
To define how web feeds are updated, select Options >Settings >Web feeds.  
Widgets  
Widgets bring more content to your device! Widgets are small, downloadable web  
applications that deliver multimedia, news feeds, and other information, such as  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Web browser 143  
weather reports, to your device. Installed widgets appear as separate applications  
in the Applications folder.  
You can download widgets from the web.  
The default access point for widgets is the same as in the web browser. When active  
in the background, some widgets may update information automatically in your  
device.  
Using widgets may involve the transmission of large amounts of data through your  
service provider's network. For information about data transmission charges,  
contact your service provider.  
Content search  
With keyword search, you can quickly find the information you are looking for on  
a web page.  
Select  
>
.
Search for text within the current web page  
Select Options >Find keyword. To go to the previous or next match, from the  
toolbar, select Find next or Find previous.  
Bookmarks  
You can store your favourite web pages in Bookmarks for instant access.  
Select  
>
.
Access bookmarks  
1
2
If you have a page other than Bookmarks as your homepage, select Options >  
Go to >Bookmarks.  
Select a web address from the list or from the collection of bookmarks in the  
Recently visited pages folder.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
144 Web browser  
Save the current web page as a bookmark  
While browsing, select Options >Web page options >Save as bookmark.  
Edit or delete bookmarks  
Select Options >Bookmark manager.  
Send or add a bookmark, or set a bookmarked web page as the homepage  
Select Options >Bookmark options.  
From the toolbar, select from the following:  
Add bookmark — Add a new bookmark.  
Go to web address — Enter a new web address.  
Delete — Delete a bookmark.  
Empty the cache  
Emptying the cache memory helps you keep your data secure.  
Select Options >Clear privacy data >Cache.  
A cache is a memory location that is used to store data temporarily. If you have tried  
to access or have accessed confidential information requiring passwords, empty the  
cache after each use. The information or services you have accessed are stored in  
the cache.  
Connection security  
If the security indicator ( ) is displayed during a connection, the data transmission  
between the device and the internet gateway or server is encrypted.  
The security icon does not indicate that the data transmission between the gateway  
and the content server (where the data is stored) is secure. The service provider  
secures the data transmission between the gateway and the content server.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Search 145  
Security certificates may be required for some services, such as banking services.  
You are notified if the identity of the server is not authentic or if you do not have  
the correct security certificate in your device. For more information, contact your  
service provider.  
Important: Even if the use of certificates makes the risks involved in remote  
connections and software installation considerably smaller, they must be used  
correctly in order to benefit from increased security. The existence of a certificate  
does not offer any protection by itself; the certificate manager must contain correct,  
authentic, or trusted certificates for increased security to be available. Certificates  
have a restricted lifetime. If "Expired certificate" or "Certificate not valid yet" is  
shown, even if the certificate should be valid, check that the current date and time  
in your device are correct.  
Before changing any certificate settings, you must make sure that you really trust  
the owner of the certificate and that the certificate really belongs to the listed  
owner.  
Search  
About Search  
Select Menu >Internet >Search.  
Search (network service) enables you to use various internet-based search services  
to find, for example, websites and images. The content and availability of the  
services may vary.  
Start a search  
Select Menu >Internet >Search.  
To search the contents of your mobile device, enter search terms in the search field,  
or browse the content categories. While you enter the search terms, the results are  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
146 Other applications  
organised into categories. The most recently accessed results appear at the top of  
the result list, if they match your search terms.  
To search for web pages on the internet, select Search the Internet, a search  
provider, and enter your search terms in the search field. The search provider you  
selected is set as your default internet search provider.  
If a default search provider is already set, select it to start a search, or select More  
search services to use another search provider.  
To change the default service provider, select Options >Select service.  
To change the country or region setting to find more search providers, select  
Options >Settings >Country or region.  
Other applications  
Clock  
Set time and date  
Select Menu >Applications >Clock.  
Select Options >Settings and from the following:  
Time — Set the time.  
Date — Set the date.  
Automatic time update — Set the network to automatically update the time, date,  
and time zone information for your device (network service).  
Alarm clock  
Select Menu >Applications >Clock.  
Set a new alarm  
1
Select New alarm.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Other applications 147  
2
3
4
Set the alarm time.  
Select Repeat to set whether and when the alarm is repeated.  
Select Done.  
View your alarms  
Select Alarms.  
indicates an active alarm.  
indicates a repeated alarm.  
Remove an alarm  
Select Alarms, go to the alarm, and select Options >Remove alarm.  
Stop the alarm  
Select Stop. If your device is switched off when an alarm expires, your device  
switches itself on and starts sounding the alarm tone.  
Set the alarm to snooze  
Select Snooze.  
Define the snooze time  
Select Options >Settings >Alarm snooze time.  
Change the alarm tone  
Select Options >Settings >Clock alarm tone.  
World clock  
With the world clock, you can view the current time in different locations.  
Select Menu >Applications >Clock.  
View the time  
Select World clock.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
148 Other applications  
Add locations to the list  
Select Options >Add location.  
Set your current location  
Go to a location, and select Options >Set as current location. The time in your  
device is changed according to the selected location. Ensure that the time is correct  
and matches your time zone.  
Calendar  
To open the calendar, select Menu >Calendar.  
Calendar views  
Select Menu >Calendar.  
Switch between calendar views  
Select Options >Change view >Day, Week, or To-do.  
Change the starting day of the week, or modify calendar alarm settings  
Select Options >Settings. The starting day of the week is the view that is displayed  
when you open the calendar.  
Go to a specific date  
Select Options >Go to date.  
Calendar toolbar  
Select Menu >Calendar.  
From the calendar toolbar, select from the following:  
Next view — Select the month view.  
Next view — Select the week view.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Other applications 149  
Next view — Select the day view.  
Next view — Select the to-do view.  
New meeting — Add a new meeting reminder.  
New to-do note — Add a new to-do note.  
File manager  
About File manager  
Select Menu >Applications >Office >File mgr..  
With File manager, you can browse, manage, and open files on your device or a  
compatible external drive.  
Find and organise files  
Select Menu >Applications >Office >File mgr..  
Search for a file  
Select Options >Find. Enter search text that matches the file name.  
Move and copy files and folders  
Select Options >Organise and the desired option.  
Sort files  
Select Options >Sort by and the desired category.  
Format the mass memory  
1
2
Select Menu >Applications >Office >File mgr..  
Select Options >Format mass memory. Do not format the mass memory  
using PC software because it may cause degraded performance.  
When the mass memory is reformatted, all data in the memory is permanently  
deleted. Back up data you want to keep before formatting the mass memory. You  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
150 Other applications  
can use Nokia Ovi Suite to back up data to a compatible computer. Digital rights  
management (DRM) technologies may prevent some backup data from being  
restored. For more information about DRM used for your content, contact your  
service provider.  
Formatting does not guarantee that all confidential data stored in the device mass  
memory is permanently destroyed. Standard formatting only marks the formatted  
area as available space and deletes the address to find the files again. The recovery  
of formatted or even overwritten data may still be possible with special recovery  
tools and software.  
Quickoffice  
About Quickoffice  
Select Menu >Applications >Office >Quickoffice.  
Quickoffice consists of the following:  
Quickword for viewing Microsoft Word documents  
Quicksheet for viewing Microsoft Excel worksheets  
Quickpoint for viewing Microsoft PowerPoint presentations  
Not all file formats or features are supported.  
To purchase the editor version of Quickoffice, select Updates and upgrades.  
Read Microsoft Word, Excel, and PowerPoint documents  
With Quickoffice, you can view Microsoft Office documents, such as Word  
documents, Excel worksheets, or PowerPoint presentations.  
Select Menu >Applications >Office >Quickoffice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Other applications 151  
Open a file  
Select the memory where the file is stored, browse to the correct folder, and select  
the file.  
Sort files  
Select Options >Sort by.  
Send files to a compatible device  
Select  
and the sending method.  
Not all formats or features are supported.  
Application manager  
About Application manager  
Select Menu >Settings and Application mgr..  
With Application manager, you can see the software packages installed in your  
device. You can view details of installed applications, remove applications, and  
define installation settings.  
You can install the following types of applications and software:  
JME applications based on Java™ technology with .jad or .jar file extensions  
Other applications and software suitable for the Symbian operating system  
with .sis or .sisx file extensions  
Widgets with the .wgz file extension  
Only install software that is compatible with your device.  
Install applications  
You can transfer installation files to your device from a compatible computer,  
download them during browsing, or receive them in a multimedia message, as an  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
152 Other applications  
e-mail attachment, or using other connectivity methods, such as Bluetooth  
connectivity.  
You can use Nokia Application Installer in Nokia Ovi Suite to install an application  
to your device.  
Icons in Application manager indicate the following:  
SIS or SISX application  
Java application  
widgets  
application installed in the mass memory  
Important: Only install and use applications and other software from trusted  
sources, such as applications that are Symbian Signed or have passed the Java  
Verified™ testing.  
Before installation, note the following:  
To view the application type, version number, and the supplier or manufacturer  
of the application, select Options >View details.  
To view the security certificate details of the application, select Details: >  
Certificates: >View details. Control the use of digital certificates in Certificate  
management.  
If you install a file that contains an update or repair to an existing application,  
you can only restore the original application if you have the original installation  
file or a full backup copy of the removed software package. To restore the  
original application, remove the application, and install the application again  
from the original installation file or the backup copy.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other applications 153  
The JAR file is required for installing Java applications. If it is missing, the device  
may ask you to download it. If there is no access point defined for the  
application, you are asked to select one.  
To install an application, do the following:  
1
To locate an installation file, select Menu >Settings and Application mgr..  
Alternatively, search installation files using File manager, or select  
Messaging >Inbox, and open a message that contains an installation file.  
2
In Application manager, select Options >Install. In other applications, select  
the installation file to start the installation.  
During installation, the device shows information about the progress of the  
installation. If you install an application without a digital signature or  
certification, the device displays a warning. Continue installation only if you are  
sure of the origin and contents of the application.  
To start an installed application, locate the application in the menu, and select the  
application. If the application does not have a default folder defined, it is installed  
in the Installed apps. folder in the main menu.  
To see which software packages are installed or removed and when, select  
Options >View log.  
Important: Your device can only support one antivirus application. Having  
more than one application with antivirus functionality could affect performance  
and operation or cause the device to stop functioning.  
After you install applications to mass memory, installation files (.sis, .sisx) remain  
in the device memory. The files may use large amounts of memory and prevent you  
from storing other files. To maintain sufficient memory, use Nokia Ovi Suite to back  
up installation files to a compatible PC, then use the file manager to remove the  
installation files from the device memory. If the .sis file is a message attachment,  
delete the message from the Messaging inbox.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
154 Other applications  
Remove applications  
You can remove applications that you have installed, for example, to increase the  
amount of available memory.  
Select Menu >Settings.  
1
2
3
Select Application mgr..  
Select Installed apps. >Options >Uninstall.  
Select Yes.  
If you remove an application, you can only reinstall it if you have the original  
software package or a full backup of the removed software package. If you remove  
a software package, you may no longer be able to open documents created with  
that software.  
If another software package depends on the software package that you removed,  
the other software package may stop working. See the documentation of the  
installed software package for details.  
Application manager settings  
Select Menu >Settings and Application mgr..  
Select Installation settings and from the following:  
Software installation — Allow or deny installation of Symbian software that does  
not have a verified digital signature.  
Online certificate check — Check online certificates before installing an  
application.  
Default web address — Set the default web address used to check online  
certificates.  
Software updates over the air  
Select Menu >Applications >SW update.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Other applications 155  
WithSoftware update (network service), youcan check if thereare updatesavailable  
for your device software or applications, and download them to your device.  
Downloading software updates may involve the transmission of large amounts of  
data (network service).  
Make sure that the device battery has enough power, or connect the charger before  
starting the update.  
Warning:  
If you install a software update, you cannot use the device, even to make emergency  
calls, until the installation is completed and the device is restarted.  
After updating your device software or applications using Software update, the  
instructions related to the updated applications in the user guide or the helps may  
no longer be up to date.  
To download the available updates, select  
. To unmark specific updates that you  
do not want to download, select the updates from the list.  
To view information on an update, select the update and  
.
To view the status of previous updates, select  
.
Select Options and from the following:  
Update via PC — Update your device using a PC. This option replaces the Start  
update option when updates are only available using the Nokia Software Updater  
PC application.  
View update history — View the status of previous updates.  
Settings — Change the settings, such as the default access point used for  
downloading updates.  
Disclaimer — View the Nokia licence agreement.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
156 Other applications  
RealPlayer  
With RealPlayer, you can play video clips or stream media files over the air without  
saving them to the device first.  
RealPlayer does not necessarily support all file formats or all the variations of file  
formats.  
Select Menu >Applications >RealPlayer.  
RealPlayer toolbar  
Select Menu >Applications >RealPlayer.  
In the Video clips, Streaming links, and Recently played views, the following toolbar  
icons may be available:  
Send — Send a video clip or streaming link.  
Play — Play a video clip or video stream.  
Delete — Delete a video clip or streaming link.  
Remove — Remove a file from the recently played list.  
Play a video clip  
Select Menu >Applications >RealPlayer.  
Play a video clip  
Select Video clips and a video clip.  
List recently played files  
In the main view, select Recently played.  
Go to a video clip, and select Options and from the following:  
Use video clip — Assign a video clip to a contact or set it as a ringing tone.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Other applications 157  
Mark/Unmark — Mark or unmark an item, to send or delete multiple items at the  
same time.  
View details — View details, such as format, resolution, and duration.  
Settings — Edit settings for video playback and streaming.  
Stream content over the air  
Select Menu >Applications >RealPlayer.  
Streaming content over the air is a network service. Select Streaming links and a  
link. You can also receive a streaming link in a text or multimedia message, or open  
a link on a web page.  
Before live content begins streaming, your device connects to the site and starts  
loading the content. The content is not saved in your device.  
In RealPlayer, you can only open RTSP links. However, RealPlayer can also play a RAM  
file if you open a HTTP link to it in a browser.  
Recorder  
You can use the recorder to record voice memos and telephone conversations.  
You can also send sound clips to your friends.  
Select Menu >Music >Recorder.  
Record a sound clip  
Select  
.
Stop recording a sound clip  
Select  
.
Listen to the sound clip  
Select  
Download from Www.Somanuals.com. All Manuals Search And Download.  
.
     
158 Other applications  
Send a sound clip as a message  
Select Options >Send.  
Record a telephone conversation  
Open the recorder during a voice call, and select . Both parties hear a tone at  
regular intervals during recording.  
Select the recording quality or where to save sound clips  
Select Options >Settings.  
The recorder cannot be used when a data call or GPRS connection is active.  
Write a note  
1
2
3
4
Select Menu >Applications >Office >Notes.  
Select Options >New note.  
Enter text in the note field.  
Select  
.
Make a calculation  
1
2
3
4
5
Select Menu >Applications >Office >Calculator.  
Enter the first number of the calculation.  
Select a function, such as add or subtract.  
Enter the second number of the calculation.  
Select =.  
This calculator has limited accuracy and is designed for simple calculations.  
Converter  
With Converter, you can convert measures from one unit to another.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Settings 159  
The converter has limited accuracy, and rounding errors may occur.  
Select Menu >Applications >Office >Converter.  
Dictionary  
You can translate words from one language to another. Not all languages may be  
supported.  
Look up a word to translate  
1
2
Select Menu >Applications >Office >Dictionary.  
Enter text in the search field. As you enter text, suggestions of words to translate  
are displayed.  
3
Select the word from the list.  
Select Options and from the following:  
Listen — Listen to the selected word.  
History — Find previously translated words from the current session.  
Languages — Change the source or target language, download languages from  
the internet, or remove a language from the dictionary. You cannot remove the  
English language from the dictionary. You can have two additional languages  
installed, besides English.  
Speech — Edit the voice feature settings. You can adjust the speed and volume of  
the voice.  
Settings  
Some settings may be preset for the device by your service provider, and you may  
not be able to change them.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
160 Settings  
Phone settings  
Date and time settings  
Select Menu >Settings and Phone >Date and time.  
Select from the following:  
Time — Enter the current time.  
Time zone — Select your location.  
Date — Enter the current date.  
Date format — Select the date format.  
Date separator — Select the symbol that separates days, months, and years.  
Time format — Select the time format.  
Time separator — Select the symbol that separates hours and minutes.  
Clock type — Select the clock type.  
Clock alarm tone — Select the tone for the alarm clock.  
Alarm snooze time — Adjust the snooze time.  
Workdays — Select your working days. You can then set an alarm only for working  
day mornings, for example.  
Automatic time update — Set the device to update the time, date, and time zone  
automatically. This network service may not be available on all networks.  
Language settings  
Select Menu >Settings and Phone >Language.  
Change the device language  
Select Phone language.  
Change the writing language  
Select Writing language.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Settings 161  
Activate predictive text input  
Select Predictive text.  
Display settings  
Select Menu >Settings and Phone >Display.  
Select from the following:  
Light sensor — Adjust the light sensor sensitivity of your device. The light sensor  
turns the lights on when the lighting of your location is dim and off when it is bright.  
Font size — Select the size of text and icons on the display.  
Welcome note / logo — Select whether you want to display a note or image when  
you switch on the device.  
Light time-out — Set how long the light stays on when you stop using the device.  
Voice commands  
Activate voice commands  
Press and hold the call key in the home screen, and say a command. The voice  
command is the name of the application or profile displayed in the list.  
To view the list of voice commands, select Menu >Settings and Phone >Voice  
commands.  
Select Options and from the following:  
Change command — Edit the voice commands.  
Playback — Listen to the synthesised voice tag.  
Remove voice command — Remove a voice command that you added manually.  
Settings — Adjust the settings.  
Voice command tutorial — Open the tutorial for voice commands.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
162 Settings  
Accessory settings  
Select Menu >Settings and Phone >Accessories.  
Some accessory connectors indicate which type of accessory is connected to the  
device.  
Select an accessory and from the following:  
Default profile — Set the profile you want activated each time you connect a  
certain compatible accessory to your device.  
Automatic answer — Set the device to answer an incoming call automatically  
after 5 seconds. If the ringing type is set to Beep once or Silent, automatic answer  
is disabled.  
Lights — Set the lights to remain on after the time-out.  
The available settings depend on the type of accessory.  
To change the settings for a TV-out connection, select TV-Out and from the  
following:  
Default profile — Set the profile you want activated each time you connect a Nokia  
Video Connectivity Cable to your device.  
TV screen size — Select the aspect ratio of the TV.  
TV system — Select the analogue video signal system compatible with your TV.  
Flicker filter — To improve image quality on the screen of your TV, select On. The  
flicker filter may not diminish image flicker on all TV screens.  
Application settings  
Select Menu >Settings and Phone >Application sett..  
In application settings, you can edit the settings of some of the applications in your  
device.  
To edit the settings, you can also select Options >Settings in each application.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Settings 163  
Device updates  
With Device updates, you can connect to a server and receive configuration settings  
for your device, create new server profiles, view existing software version and  
device information, or view and manage existing server profiles.  
Select Menu >Settings and Phone >Phone mgmt. >Device updates.  
If software updates over the air are supported by your network, you may also be  
able to request updates through the device.  
You may receive server profiles and different configuration settings from your  
service providers and company information management department. These  
configuration settings may include connection and other settings used by different  
applications in your device.  
Receive configuration settings  
1
2
Select Options >Server profiles.  
Go to a profile, and select Options >Start configuration.  
Create a server profile  
Select Options >Server profiles >Options >New server profile.  
Delete a server profile  
Select Options >Delete.  
Security settings  
Phone and SIM  
Select Menu >Settings and Phone >Phone mgmt. >Security >Phone and SIM  
card.  
Select from the following:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
164 Settings  
PIN code request — When active, the code is requested each time the device is  
switched on. Deactivating the PIN code request may not be allowed by some SIM  
cards.  
PIN code andPIN2 code — Change the PIN and PIN2 code. These codes can only  
include numbers. Avoid using access codes similar to the emergency numbers to  
prevent accidental dialling of the emergency number. If you forget the PIN or PIN2  
code, contact your service provider. If you forget the lock code, contact a Nokia Care  
point or your service provider.  
Lock code — The lock code is used to unlock the device. To avoid unauthorised use  
of your device, change the lock code. The preset code is 12345. The new code can  
be 4-255 characters long. Alphanumeric characters and both uppercase and  
lowercase characters can be used. The device notifies you if the lock code is not  
properly formatted. Keep the new code secret and separate from your device.  
Phone autolock period — To avoid unauthorised use, you can set a time-out after  
which the device automatically locks. A locked device cannot be used until the  
correct lock code is entered. To turn off autolock, select None.  
Lock if SIM card changed — Set the device to ask for the lock code when an  
unknown SIM card is inserted into your device. The device maintains a list of SIM  
cards that are recognised as the owner’s cards.  
Remote phone locking — Enable or disable remote lock.  
Closed user group — Specify a group of people to whom you can call and who can  
call you (network service).  
Confirm SIM services — Set the device to display confirmation messages when  
you are using a SIM card service (network service).  
Certificate management  
Select Menu >Settings and Phone >Phone mgmt. >Security >Certificate  
management.  
Digital certificates should be used if you want to connect to an online bank or  
another site or remote server for actions that involve transferring confidential  
information. They should also be used if you want to reduce the risk of viruses or  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Settings 165  
other malicious software and be sure of the authenticity of software when  
downloading and installing software.  
Select from the following:  
Authority certificates — View and edit authority certificates.  
Trusted site certificates — View and edit trusted site certificates.  
Personal certificates — View and edit personal certificates.  
Phone certificates — View and edit device certificates.  
Digital certificates do not guarantee safety; they are used to verify the origin of  
software.  
Important: Even if the use of certificates makes the risks involved in remote  
connections and software installation considerably smaller, they must be used  
correctly in order to benefit from increased security. The existence of a certificate  
does not offer any protection by itself; the certificate manager must contain correct,  
authentic, or trusted certificates for increased security to be available. Certificates  
have a restricted lifetime. If "Expired certificate" or "Certificate not valid yet" is  
shown, even if the certificate should be valid, check that the current date and time  
in your device are correct.  
View certificate details — check authenticity  
You can only be sure of the correct identity of a server when the signature and the  
validity period of a server certificate have been checked.  
You are notified if the identity of the server is not authentic or if you do not have  
the correct security certificate in your device.  
To check the details of a certificate, select Options >Certificate details. The  
validity of the certificate is checked, and one of the following notes may be  
displayed:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
166 Settings  
Certificate not trusted — You have not set any application to use the certificate.  
Expired certificate — The certificate validity period has ended.  
Certificate not valid yet — The certificate validity period has not yet begun.  
Certificate corrupted — The certificate cannot be used. Contact the certificate  
issuer.  
Change the trust settings  
Before changing any certificate settings, you must make sure that you really trust  
the owner of the certificate and that the certificate really belongs to the listed  
owner.  
To change the settings for an authority certificate, select Options >Trust  
settings. Depending on the certificate, a list of the applications that can use the  
selected certificate is shown. For example:  
Symbian installation: Yes — The certificate is able to certify the origin of a new  
Symbian operating system application.  
Internet: Yes — The certificate is able to certify servers.  
App. installation: Yes — The certificate is able to certify the origin of a new Java  
application.  
To change the value, select Options >Change trust setting.  
Security module  
Select Menu >Settings and Phone >Phone mgmt. >Security >Security  
module.  
To view or edit a security module (if available), select it from the list.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Settings 167  
To view detailed information about a security module, select Options >Security  
details.  
Restore original settings  
You may want to reset some of the settings to their original values. All active calls  
and connections must be ended.  
Select Menu >Settings and Phone >Phone mgmt. >Factory settings. To  
restore the settings, you need to enter the lock code.  
After resetting, the device may take a longer time to switch on. Documents and files  
are unaffected.  
Protected content  
Digital rights management (DRM) protected content, for example some media files,  
such as images, music, or video clips, comes with an associated licence that defines  
your rights to use the content.  
You can view the details and status of the licences, and reactivate and remove  
licences.  
Manage digital rights licences  
Select Menu >Settings >Phone >Phone mgmt. >Security >Protected  
content.  
Digital rights management  
Content owners may use different types of digital rights management (DRM)  
technologies to protect their intellectual property, including copyrights. This device  
uses various types of DRM software to access DRM-protected content. With this  
device you can access content protected with WMDRM 10, OMA DRM 1.0, and OMA  
DRM 2.0. If certain DRM software fails to protect the content, content owners may  
ask that such DRM software's ability to access new DRM-protected content be  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
168 Settings  
revoked. Revocation may also prevent renewal of such DRM-protected content  
already in your device. Revocation of such DRM software does not affect the use of  
content protected with other types of DRM or the use of non-DRM-protected content.  
Digital rights management (DRM) protected content comes with an associated  
licence that defines your rights to use the content.  
If your device has OMA DRM-protected content, to back up both the activation keys  
and the content, use the backup feature of Nokia Ovi Suite.  
If your device has WMDRM-protected content, both the licence and the content will  
be lost if the device memory is formatted. You may also lose the licence and the  
content if the files on your device get corrupted. Losing the licence or the content  
may limit your ability to use the same content on your device again. For more  
information, contact your service provider.  
Some licence may be connected to a specific SIM card, and the protected content  
can be accessed only if the SIM card is inserted in the device.  
Notification lights  
Select Menu >Settings and Phone >Notification lights.  
To turn the standby breathing light on or off, select Standby br. light.  
When the standby breathing light is turned on, the menu key lights up periodically.  
To turn the notification light on or off, select Notification light.  
When the notification light is turned on, the menu key lights up for a period you  
define to notify of missed events, such as missed calls or unread messages.  
Call settings  
Call settings  
With call settings, you can define call specific settings in your device.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Settings 169  
Select Menu >Settings and Calling >Call.  
Select from the following:  
Send my caller ID — Select Yes to show your phone number to the person you are  
calling. To use the setting agreed upon with your service provider, select Set by  
network) (network service).  
Call waiting — Set your device to notify you of incoming calls while you are in a  
call (network service), or check whether the feature is activated.  
Reject call with message — Send a text message when you reject a call, informing  
the caller why you could not answer the call.  
Message text — Write the standard text message that is sent when you reject a  
call.  
Own video in recvd. call — Allow or deny video sending during a video call from  
your device.  
Image in video call — If video is not sent during a video call, select the image to  
be displayed instead.  
Automatic redial — Set your device to make a maximum of 10 attempts to connect  
the call after an unsuccessful call attempt. To stop automatic redialling, press the  
end key.  
Show call duration — Display the length of a call during a call.  
Summary after call — Display the length of a call after a call ends.  
Speed dialling — Activate speed dialling.  
Anykey answer — Activate anykey answer.  
Line in use — This setting (network service) is shown only if the SIM card supports  
two subscriber numbers, that is, two phone lines. Select which phone line you want  
to use to make calls or send text messages. Calls on both lines can be answered  
irrespective of the selected line. If you select Line 2, and have not subscribed to this  
network service, you are not able to make calls. When line 2 is selected, is  
displayed in the home screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
170 Settings  
Line change — Prevent phone line selection (network service), if supported by  
your SIM card. To change this setting, you need the PIN2 code.  
Call divert  
You can divert incoming calls to your voice mailbox or another phone number. For  
details, contact your service provider.  
Select Menu >Settings and Calling >Call divert.  
Divert all voice calls to your voice mailbox or another phone number  
1
2
3
4
Select Voice calls >All voice calls.  
To activate call divert, select Activate.  
To divert calls to your voice mailbox, select To voice mailbox.  
To divert calls to another phone number, select To other number, and enter  
the number, or select Find to retrieve a number saved in the contacts list.  
Several diverting options can be active at the same time. In the home screen,  
indicates that all calls are diverted.  
Call barring  
Call barring (networkservice) allowsyouto restrictthe callsthatyou make or receive  
with the device. For example, you can restrict all outgoing international calls or  
incoming calls when you are abroad. To change the settings, you need the barring  
password from your service provider.  
Select Menu >Settings and Calling >Call barring.  
When security features that restrict calls are in use (such as call barring, closed user  
group, and fixed dialling), calls may be possible to the official emergency number  
programmed into your device. Call barring and call diverting cannot be active at the  
same time.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Protect the environment 171  
Voice call barring  
Select the desired barring option and Activate, Deactivate, or Check status. Call  
barring affects all calls, including data calls.  
Protect the environment  
Save energy  
You do not need to charge your battery so often if you do the following:  
Close applications and data connections, such as your WLAN or Bluetooth  
connection, when not in use.  
Deactivate unnecessary sounds, such as touch screen and key tones.  
Recycle  
When this device has reached the end of its working life, all of its materials can be  
recovered as materials and energy. To guarantee the correct disposal and reuse,  
Nokia co-operates with its partners through a program called We:recycle.For  
information on how to recycle your old Nokia products and where to find collection  
sites, go to www.nokia.com/werecycle, or using a mobile device, nokia.mobi/  
werecycle, or call the Nokia Contact Center.  
Recycle packaging and user guides at your local recycling scheme.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
172 Product and safety information  
The crossed-out wheeled-bin symbol on your product, battery, literature, or  
packaging reminds you that all electrical and electronic products, batteries, and  
accumulators must be taken to separate collection at the end of their working life.  
This requirement applies in the European Union. Do not dispose of these products  
as unsortedmunicipal waste. For more informationonthe environmental attributes  
of your device, see www.nokia.com/ecodeclaration.  
Product and safety information  
Accessories  
Warning:  
Use only batteries, chargers, and accessories approved by Nokia for use with this particular model. The use of any other  
types may invalidate any approval or warranty, and may be dangerous. In particular, use of unapproved chargers or  
batteries may present a risk of fire, explosion, leakage, or other hazard.  
For availability of approved accessories, please check with your dealer. When you disconnect the power cord of any  
accessory, grasp and pull the plug, not the cord.  
Battery  
Battery and charger information  
Your device is powered by a rechargeable battery. The battery intended for use with this device is BL-5J. Nokia may make  
additional battery models available for this device.  
This device is intended for use when supplied with power from the following chargers: AC-8. The exact Nokia charger  
model number may vary depending on the plug type, identified by E, X, AR, U, A, C, K, or B.  
The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby  
times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your  
battery only with Nokia approved chargers designated for this device.  
If a battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary  
to connect the charger, then disconnect and reconnect it to begin charging the battery. If the battery is completely  
discharged, it may take several minutes before the charging indicator appears on the display or before any calls can be  
made.  
Safe removal. Always switch the device off and disconnect the charger before removing the battery.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Product and safety information 173  
Proper charging. Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged  
battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will  
lose its charge over time.  
Avoid extreme temperatures. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). Extreme  
temperatures reduce the capacity and lifetime of the battery. A device with a hot or cold battery may not work temporarily.  
Battery performance is particularly limited in temperatures well below freezing.  
Do not short-circuit. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct  
connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This  
might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may  
damage the battery or the connecting object.  
Disposal. Do not dispose of batteries in a fire as they may explode. Dispose of batteries according to local regulations.  
Please recycle when possible. Do not dispose as household waste.  
Leak. Do not dismantle, cut, open, crush, bend, puncture, or shred cells or batteries. In the event of a battery leak, prevent  
battery liquid contact with skin or eyes. If this happens, flush the affected areas immediately with water, or seek medical  
help.  
Damage. Do not modify, remanufacture, attempt to insert foreign objects into the battery, or immerse or expose it to  
water or other liquids. Batteries may explode if damaged.  
Correct use. Use the battery only for its intended purpose. Improper battery use may result in a fire, explosion, or other  
hazard. If the device or battery is dropped, especially on a hard surface, and you believe the battery has been damaged,  
take it to a service centre for inspection before continuing to use it. Never use any charger or battery that is damaged.  
Keep your battery out of the reach of small children.  
Nokia battery authentication guidelines  
Always use original Nokia batteries for your safety. To help ensure that you are getting an original Nokia battery, purchase  
it from a Nokia authorised service centre or dealer, and check the hologram label.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
174 Product and safety information  
Authenticate hologram  
1
Look at the hologram. You should see the Nokia connecting hands symbol from one angle and the Nokia Original  
Accessories logo from the other angle.  
2
Angle the hologram left, right, down, and up. You should see 1, 2, 3 and 4 dots on each side respectively.  
However, this is not a total assurance of the authenticity of the battery. If you cannot confirm authenticity or if you have  
any reason to believe that your Nokia battery with the hologram on the label is not an authentic Nokia battery, stop using  
the battery and take it to the nearest Nokia authorised service centre or dealer.  
To find out more about original Nokia batteries, go to www.nokia.com/battery.  
Taking care of your device  
Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions  
will help you protect your warranty coverage.  
Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will  
corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely  
before replacing it.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product and safety information 175  
Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.  
Do not store the device in high or cold temperature. High temperatures can shorten the life of electronic devices,  
damage batteries, and warp or melt certain plastics. When the device warms to its normal temperature from a cold  
temperature, moisture can form inside the device and damage electronic circuit boards.  
Do not attempt to open the device other than as instructed in this guide.  
Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.  
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. Only use a soft, clean, dry  
cloth to clean the surface of the device.  
Do not paint the device. Paint can clog the moving parts and prevent proper operation.  
Use only the supplied or an approved replacement antenna. Unauthorised antennas, modifications, or attachments  
could damage the device and may violate regulations governing radio devices.  
Use chargers indoors.  
Backup all data you want to keep, such as contacts and calendar notes.  
To reset the device from time to time for optimum performance, power off the device and remove the battery.  
These suggestions apply equally to your device, battery, charger, or any accessory.  
Recycle  
Always return your used electronic products, batteries, and packaging materials to dedicated collection points. This way  
you help prevent uncontrolled waste disposal and promote the recycling of materials. Check product environmental  
information and how to recycle your Nokia products at www.nokia.com/werecycle, or with a mobile device, nokia.mobi/  
Additional safety information  
Note: The surface of this device does not contain nickel in the platings. The surface of this device contains  
stainless steel.  
Small children  
Your device and its accessories are not toys. They may contain small parts. Keep them out of the reach of small children.  
Operating environment  
This device meets RF exposure guidelines in the normal use position at the ear or at least 1.5 centimetre (5/8 inch) away  
from the body. Any carry case, belt clip, or holder for body-worn operation should not contain metal and should position  
the device the above-stated distance from your body.  
To send data files or messages requires a quality connection to the network. Data files or messages may be delayed until  
such a connection is available. Follow the separation distance instructions until the transmission is completed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
176 Product and safety information  
Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other  
magnetic storage media near the device, because information stored on them may be erased.  
Medical devices  
Operation of radio transmitting equipment, including wireless phones, may interfere with the function of inadequately  
protected medical devices. Consult a physician or the manufacturer of the medical device to determine whether they are  
adequately shielded from external RF energy. Switch off your device when regulations posted instruct you to do so.  
Hospitals or health care facilities may use equipment sensitive to external RF energy.  
Implanted medical devices  
Manufacturers of medical devices recommend a minimum separation of 15.3 centimetres (6 inches) between a wireless  
device and an implanted medical device, such as a pacemaker or implanted cardioverter defibrillator, to avoid potential  
interference with the medical device. Persons who have such devices should:  
Always keep the wireless device more than 15.3 centimetres (6 inches) from the medical device.  
Not carry the wireless device in a breast pocket.  
Hold the wireless device to the ear opposite the medical device.  
Turn the wireless device off if there is any reason to suspect that interference is taking place.  
Follow the manufacturer directions for the implanted medical device.  
If you have any questions about using your wireless device with an implanted medical device, consult your health care  
provider.  
Hearing aids  
Some digital wireless devices may interfere with some hearing aids.  
Vehicles  
RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic  
fuel injection, electronic antilock braking, electronic speed control, and air bag systems. For more information, check with  
the manufacturer of your vehicle or its equipment.  
Only qualified personnel should service the device or install the device in a vehicle. Faulty installation or service may be  
dangerous and may invalidate your warranty. Check regularly that all wireless device equipment in your vehicle is  
mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same  
compartment as the device, its parts, or accessories. Remember that air bags inflate with great force. Do not place your  
device or accessories in the air bag deployment area.  
Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the  
operation of the aircraft and may be illegal.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product and safety information 177  
Potentially explosive environments  
Switch off your device in any area with a potentially explosive atmosphere. Obey all posted instructions. Sparks in such  
areas could cause an explosion or fire resulting in bodily injury or death. Switch off the device at refuelling points such  
as near gas pumps at service stations. Observe restrictions in fuel depots, storage, and distribution areas; chemical plants;  
or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always,  
clearly marked. They include areas where you would be advised to turn off your vehicle engine, below deck on boats,  
chemical transfer or storage facilities and where the air contains chemicals or particles such as grain, dust, or metal  
powders. You should check with the manufacturers of vehicles using liquefied petroleum gas (such as propane or butane)  
to determine if this device can be safely used in their vicinity.  
Emergency calls  
Important: This device operates using radio signals, wireless networks, landline networks, and user-  
programmed functions. If your device supports voice calls over the internet (internet calls), activate both the internet  
calls and the cellular phone. The device will attempt to make emergency calls over both the cellular networks and through  
your internet call provider if both are activated. Connections in all conditions cannot be guaranteed. You should never  
rely solely on any wireless device for essential communications like medical emergencies.  
To make an emergency call:  
1
If the device is not on, switch it on. Check for adequate signal strength. Depending on your device, you may also  
need to complete the following:  
Insert a SIM card if your device uses one.  
Remove certain call restrictions you have activated in your device.  
Change your profile from offline profile mode to an active profile.  
If the screen and keys are locked, slide the lock switch on the side of the device to unlock them.  
2
3
Press the end key as many times as needed to clear the display and ready the device for calls.  
To open the dialler, select Telephone or  
.
4
5
Enter the official emergency number for your present location. Emergency numbers vary by location.  
Press the call key.  
When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may  
be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.  
Certification information (SAR)  
This mobile device meets guidelines for exposure to radio waves.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
178 Copyright and other notices  
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves  
recommended by international guidelines. These guidelines were developed by the independent scientific organisation  
ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.  
The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR.  
The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR  
are conducted using standard operating positions with the device transmitting at its highest certified power level in all  
tested frequency bands. The actual SAR level of an operating device can be below the maximum value because the device  
is designed to use only the power required to reach the network. That amount changes depending on a number of factors  
such as how close you are to a network base station.  
The highest SAR value under the ICNIRP guidelines for use of the device at the ear is 1.11 W/kg.  
Use of device accessories may result in different SAR values. SAR values may vary depending on national reporting and  
testing requirements and the network band. Additional SAR information may be provided under product information at  
Copyright and other notices  
DECLARATION OF CONFORMITY  
Hereby, NOKIA CORPORATION declares that this RM-559 product is in compliance with the essential requirements and other  
relevantprovisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/  
© 2011 Nokia. All rights reserved.  
Nokia, Nokia Connecting People, Nokia Original Accessories logo, and Nokia Original Enhancements logo are trademarks  
or registered trademarks of Nokia Corporation. Nokia tune is a sound mark of Nokia Corporation. Other product and  
company names mentioned herein may be trademarks or tradenames of their respective owners  
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the  
prior written permission of Nokia is prohibited. Nokia operates a policy of continuous development. Nokia reserves the  
right to make changes and improvements to any of the products described in this document without prior notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Copyright and other notices 179  
Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.  
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in  
connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer  
engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed  
video provider. No license is granted or shall be implied for any other use. Additional information, including that related  
to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://www.mpegla.com.  
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS  
BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES  
HOWSOEVER CAUSED.  
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY  
KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT.  
NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.  
Reverse engineering of software in the device is prohibited to the extent permitted by applicable law. Insofar as this user  
guide contains any limitations on Nokia's representations, warranties, damages and liabilities, such limitations shall  
likewise limit any representations, warranties, damages and liabilities of Nokia's licensors.  
The third-party applications provided with your device may have been created and may be owned by persons or entities  
not affiliated with or related to Nokia. Nokia does not own the copyrights or intellectual property rights to the third-party  
applications. As such, Nokia does not take any responsibility for end-user support, functionality of the applications, or  
the information in the applications or these materials. Nokia does not provide any warranty for the third-party  
applications. BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS WITHOUT  
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER  
ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED,  
INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THAT  
THE APPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.  
The availability of particular products and applications and services for these products may vary by region. Please check  
with your Nokia dealer for details and availability of language options. This device may contain commodities, technology  
or software subjectto export lawsand regulations from the US and other countries. Diversion contrary to law is prohibited.  
FCC/INDUSTRY CANADA NOTICE  
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving  
equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be  
Download from Www.Somanuals.com. All Manuals Search And Download.  
180 Copyright and other notices  
eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules.  
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this  
device must accept any interference received, including interference that may cause undesired operation. Any changes  
or modifications not expressly approved by Nokia could void the user's authority to operate this equipment.  
Model number: X6-00  
/Issue 5.3 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index 181  
Bluetooth  
bookmarks  
browser  
Index  
Symbols/Numbers  
bookmarks  
802.1x security settings  
browsing pages  
cache memory  
searching content  
security  
A
A-GPS (assisted GPS)  
access codes  
toolbar  
widgets  
C
accessories  
alarm clock  
cable connection  
cache memory  
calculator  
calendar  
answering calls  
antennas  
application settings  
applications  
call log  
assisted GPS (A-GPS)  
attachments  
call waiting  
calls  
audio messages  
answering  
conference  
duration of  
ending  
B
backing up device memory  
barring calls  
options during  
redialling  
rejecting  
battery  
charging/discharging  
inserting  
restricting  
settings  
saving power  
blocking  
camera  
blogs  
device  
flash  
image mode  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
182 Index  
D
indicators  
location information  
options  
data connections  
Bluetooth  
recording  
PC connectivity  
synchronisation  
wireless  
scenes  
sequence mode  
video mode  
date and time  
declining calls  
See rejecting calls  
capture settings  
in camera  
cell broadcast messages  
certificates  
70 device  
updating  
charger, battery  
clock  
15 dictionary  
146, 147 dismissing calls  
133 display settings  
downloads  
computer connections  
See also data connections  
conference calls  
connectivity  
contacts  
podcasts  
DRM (digital rights management) 167  
duration of calls  
adding  
E
copying  
defaults  
e-mail  
deleting  
editing  
attachments  
deleting  
overview  
ringing tones  
saving  
downloading  
mailbox  
settings  
sending  
e-mail messages  
synchronising  
voice tags  
environmental tips  
F
copyright protection  
factory settings, restoring  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index 183  
J
feeds, news  
file management  
file manager  
fixed dialling  
Java applications  
K
key, WEP security  
keypad lock  
keys  
G
Gallery  
gallery  
L
general information  
GPS  
landmarks  
position requests  
language settings  
licences  
GPS (Global Positioning System)  
GPS (global positioning system) 95,  
location information  
lock code  
97,  
99  
lock switch  
locking  
H
headset  
remotely  
help application  
home screen  
locking the keys  
logs  
loudspeaker  
I
M
IAPs (internet access points)  
images  
Mail for Exchange  
mailbox  
IMEI number  
inbox, message  
inbox, messages  
indicators  
e-mail  
voice  
Maps  
indicators and icons  
installing, applications  
internet connection  
See also browser  
browsing  
changing views  
display elements  
downloading maps  
Download from Www.Somanuals.com. All Manuals Search And Download.  
184 Index  
driving routes  
voice  
Favourites  
108 MMS (multimedia message service) 61,  
72  
finding locations  
location details  
navigating  
multimedia messages  
music player  
playlists  
organising places  
organising routes  
planning routes  
positioning  
muting sound  
N
navigation tools  
network settings  
news feeds  
saving places  
saving routes  
sending places  
synchronising  
traffic information  
voice guidance  
walking routes  
Nokia Ovi Player  
Nokia support information  
Notes  
notification light  
mass memory  
media  
O
office applications  
offline profile  
outbox  
music player  
RealPlayer  
media bar  
media key  
memory  
Ovi by Nokia  
Ovi Music  
Ovi Store  
clearing  
web cache  
P
menu  
packet data connection  
page overview  
messages  
e-mail  
pairing devices  
folders for  
multimedia  
settings  
personal certificates  
phone setup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index 185  
photos  
restoring settings  
roaming  
See camera  
PIN codes  
S
podcasting  
positioning information  
presentations, multimedia  
profiles  
scenes  
image and video  
searching  
security  
offline restrictions  
proximity sensor  
proxy settings  
PUK codes  
browser  
certificates  
security code  
security module  
self-timer, camera  
sensor settings  
sent messages  
service commands  
service messages  
settings  
Q
Quickoffice  
R
radio  
listening  
stations  
access points  
accessories  
RealPlayer  
recent calls  
recorder  
application manager  
applications  
Bluetooth  
calls  
recording  
video clips  
recording settings  
certificates  
date and time  
display  
in camera  
recycling  
rejecting calls  
remote locking  
remote mailbox  
remote SIM mode  
language  
messages  
network  
packet data  
Download from Www.Somanuals.com. All Manuals Search And Download.  
186 Index  
podcasting  
SIM messages  
positioning  
SIP  
99 themes  
134 touch screen  
video centre  
WLAN  
139 transferring content  
120, 123, 124, 125 transferring music  
45 TV-out  
shared video  
shooting modes  
U
camera  
SIM card  
59 updates  
inserting  
device  
messages  
removing  
70 USB cable connection  
35 useful information  
SIM card security  
V
SIP (session initiation protocol)  
SMS (short message service)  
software  
61 video  
shared  
viewing  
updating  
software applications  
software updates  
songs  
151 video calls  
answering  
rejecting  
speakerphone  
speed dialling  
streaming  
30 Video Centre  
41 video centre  
downloading  
support  
my videos  
synchronisation  
transferring videos  
viewing  
T
video clips  
text input  
playing  
shared  
text messages  
sending  
61 video feeds  
settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index 187  
video sharing  
sharing live video  
sharing video clips  
virtual keyboard  
virtual keypad  
voice calls  
See calls  
voice commands  
voice dialling  
volume control  
W
web connection  
web logs  
WEP security  
widgets  
wireless LAN (WLAN)  
wireless LAN settings  
WLAN (wireless local area network) 117,  
world clock  
WPA security  
wrist strap  
Z
zooming  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Minolta Printer Pi3505e PS User Manual
Omega Engineering Network Card DAQ 12 User Manual
Onkyo Headphones ES CTI300 User Manual
Optoma Technology Projection Television EP7155 User Manual
Panasonic Printer KX MC6040 User Manual
Panasonic Projector D6KE User Manual
Panasonic Stereo System 377 User Manual
ParaBody Home Gym 917101 User Manual
Parker Hannifin Network Card OEM6250 User Manual
Parrot Headphones PMK5800 User Manual