AX 300 / AX 400
Instructions For Use
Nilfisk MODELS 56264400, 56262170, 56262171
56264401, 56262175, 56262174 56262054
56262055, 56262213, 56262214, 56264466
English
4/04 Form Number 56041590
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
This machine is only suitable for commercial use, for example in hotels, schools, hospitals, factories, shops and offices other
than normal residential housekeeping purposes.
When using an electrical appliance, basic precautions should always be followed, including the following:
Read all instructions before using this appliance.
WARNING!
To reduce the risk of fire, electric shock, or injury:
•
•
•
•
•
Do not leave the appliance when it is plugged in. Unplug the unit from the outlet when not in use and before servicing.
To avoid electric shock, do not expose to rain. Store indoors.
Do not allow to be used as a toy. Close attention is necessary when used near children.
Use only as described in this manual. Use only the manufacturer’s recommended attachments.
Do not use with damaged cord or plug. If the appliance is not working as it should be, has been dropped, damaged, left outdoors
or dropped into water, return it to a service center.
•
Donotpullorcarrybythe cord, use the cordas a handle, close a dooronthe cord, orpullthe cordaroundsharpedges orcorners.
Do not run the appliance over the cord. Keep the cord away from heated surfaces.
Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
Do not handle the plug, cord or appliance with wet hands.
Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may
reduce air flow.
•
•
•
•
•
•
•
•
•
Keep loose clothing, hair, fingers, and all parts of body away from openings and moving parts.
Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes, or any health endangering dusts.
Turn off all controls before unplugging.
Use extra care when cleaning on stairs.
Do not use to pick up flammable or combustible liquids such as petrol or use in areas where they may be present.
If foam or liquid comes out with the vacuum exhaust, switch power off immediately. Verify that there are no foreign objects
obstructing the float ball from moving freely. Contact Nilfisk if the problem persists.
Liquid ejected at the spray nozzle could be dangerous as a result of its temperature, pressure or chemical content.
Only use the brushes provided with the appliance or those specified in the instruction manual. The use of other brushes may
impair safety.
•
•
SAVE THESE INSTRUCTIONS
FORM NO. 56041590 / AX 300 / AX 400 - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANTES MESURES DE SÉCURITÉ
Cette machine ne convient qu´à un usage industriel, par exemple dans des hôtels, écoles, hôpitaux, usines, boutiques et
bureaux et autres à l´exclusion de tout usage de maintenance résidentielle normale.
L’utilisation d’un appareil électrique demande certaines précautions:
LIRE TOUTES LES INSTRUCTIONS AVANT DE FAIRE FONCTIONNER CET APPAREIL
AVERTISSEMENT!
Pour réduire les risques d’incendie, de choc électrique ou de blessure:
•
Ne pas laisser l’appareil sans surveillance lorsqu’il est branché. Débrancher lorsque l’appareil n’est pas utilisé et avant
l’entretien.
•
•
Pour réduire les risques de choc électrique, utiliser à l’intérieur seulement.
Ne pas permettre aux enfants de jouer avec l’appareil. Une attention particulière est nécessaire lorsque l’appareil est utilisé
par des enfants ou à proximité de ces derniers.
•
•
N’utiliser que conformément à cette notice avec les accessoires recommandés par le fabricant.
Ne pas utiliser si le câble ou la fiche est endommagé. Retourner l’appareil à un atelier de réparation s’il ne fonctionne pas bien,
s’il est tombé ou s’il a été endommagé, oublié à l’extérieur ou immergé.
•
Ne pas tirer soulever ou traîner l’appareil par le câble. Ne pas utiliser le câble comme une poignée, le coincer dans l’embrasure
d’une porte ou l’appuyer contre des arêtes vives ou des coins. Ne pas faire rouler l’appareil sur le câble. Garder le câble à l’écart
des surfaces chaudes.
•
•
•
Ne pas débrancher en tirant sur le câble. Tirer plutôt la fiche.
Ne pas toucher la fiche ou l’appareil avec des mains humides.
N’insérer aucun objet dans les ouvertures. Ne pas utiliser l’appareil lorsqu’une ouverture est bloquée. S’assurer que de la
poussière, de la peluche, des cheveux ou d’autres matières ne réduisent pas le débit d’air.
Maintenir les cheveux, les vêtements amples, les doigts et toutes les parties du corps à l’écart des ouvertures et des pièces
mobiles.
Ne pas aspirer de matières en combustion ou qui dégagent de la fumée, comme des cigarettes, des allumettes ou des cendres
chaudes.
•
•
•
•
•
Mettre toutes les commandes à la position ARRÊT avant de débrancher l’appareil.
User de prudence lors du nettoyage des escaliers.
Ne pas aspirer des liquides inflammables ou combustibles, comme de l’essence, et ne pas faire fonctionner dans des endroits
ou peuvent se trouver de tels liquides.
•
•
•
Si de la mousse ou un liquide s’échappe avec l’air évacué, mettez immédiatement l’aspirateur hors tension. Assurez-vous
qu’aucun corps étranger n’empêche le flotteur de se déplacer librement. Si le problème persiste, contactez Nilfisk.
Leliquidequisortdel’emboutdevaporisationpeuts’avérerdangereuxenraisondesatempérature,desapressionouduproduit
chimique qu’il contient.
Utilisez uniquement les brosses fournies avec l’appareil ou celles spécifiées dans le manuel d’instructions. L’utilisation d’autres
brosses peut mettre la sécurité en péril.
CONSERVER CES INSTRUCTIONS
4 - FORM NO. 56041590 / AX 300 / AX 400
Download from Www.Somanuals.com. All Manuals Search And Download.
1
3
5
2
4
6
standard black
(optional) blue
carpet
smooth surface
(optional) gray 500
(optional) gray 240
light grit
grout grit
Select the correct brush for your cleaning application.
7
8
FORM NO. 56041590 / AX 300 / AX 400 - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
1
3
2
4
Remove wheel
5
7
6
8
6 - FORM NO. 56041590 / AX 300 / AX 400
Download from Www.Somanuals.com. All Manuals Search And Download.
1
3
2
4
Slide wheel on
5
6
7
8
FORM NO. 56041590 / AX 300 / AX 400 - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Read the cleaning chemical label and figure the proper amount of chemical for your machine.
3
4
AX 300
15 litres (4 gallons)
AX 400
30 litres (8 gallons)
5
6
MAX TEMP
60° C 140° F
7
8
1"
2.5 cm
8 - FORM NO. 56041590 / AX 300 / AX 400
Download from Www.Somanuals.com. All Manuals Search And Download.
1
3
2
4
5
Start the vacuum
Start the brush
6
To adjust the brush on carpet, first turn the knob to the LEFT to LOWER the brush until the light comes on.
7
Then turn the knob to the RIGHT to RAISE the brush until the light just turns off. The machine will help propel itself (on carpet) when the brush is properly adjusted.
FORM NO. 56041590 / AX 300 / AX 400 - 9
Download from Www.Somanuals.com. All Manuals Search And Download.
8
9
10
Overlap 2" (5 cm) on each pass.
10 - FORM NO. 56041590 / AX 300 / AX 400
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Turn machine OFF.
3
5
7
4
6
8
FORM NO. 56041590 / AX 300 / AX 400 - 11
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE SCHEDULE
MAINTENANCE ITEM
WEEKLY
MONTHLY
YEARLY
Clean the Brush
Clean the Pick-Up Tool
Check the Power Cord
X
X
X
Clean the Spray Nozzle
Lubricate the Machine
Check the Vacuum Motor Airways
*Check the Vacuum Motor Brushes
X
X
X
X
*Have Nilfisk check the carbon motor brushes once a year or after 500 operating hours.
STORING THE MACHINE
Store the machine indoors in a clean, dry place. Keep from freezing. Leave the tanks open to air them out..
WARNING!
To reduce the risk electric shock or injury, unplug the power cord before servicing.
BRUSH MAINTENANCE
Once a week (or more often if necessary), remove debris from the brush.
PICK-UP TOOL MAINTENANCE
Once a week (or more often if necessary), remove debris from the pick-up tool.
POWER CORD MAINTENANCE
Once a week (or more often if necessary), check the power cord for cracked or damaged insulation, exposed wires in the cord or plug, and
damaged or missing ground pin. Repair or replace damaged cord or plug immediately.
SPRAY NOZZLE MAINTENANCE
Once a month (or more often if necessary), remove the spray nozzle from the machine and soak it overnight in a vinegar and water rinse to
remove chemical deposits.
The spray nozzle is located just behind the brush, on the bottom of the machine.
Die Spritzdüse ist knapp hinter der Bürste, unten an der Maschine, angeordnet.
12 - FORM NO. 56041590 / AX 300 / AX 400
Download from Www.Somanuals.com. All Manuals Search And Download.
LUBRICATION
Once a month, wipe the solution valve with a clean cloth. Then use a spray silicone lubricant on all pivot points associated with the valve
assembly, especially the valve plunger.
Once a month, lubricate the pivot points of the handle and the wheel axles. Wipe off any excess to avoid staining floor surfaces.
Valve Plunger
The Solution Valve Assembly is located on the bottom of the machine.
VACUUM MOTOR MAINTENANCE
Once a month, check the vacuum motor to make sure the airways are not blocked. Clean the dome lid on the recovery tank thoroughly.
Clear hoses of debris and keep the vacuum motor exhaust area clean.
VACUUM MOTOR AIRWAYS
Dome Lid
Recovery Hose
Vacuum Exhaust
Recovery Hose
Pick Up Tool
Vacuum Hose
Vacuum Exhaust
Float Ball and Cage
Have Nilfisk check the carbon motor brushes once a year or after 500 operating hours. Replace the carbon brushes if they are worn to 9.5
mm or less.
IMPORTANT!
Motor damage from failure to service the carbon brushes is not covered under warranty.
FORM NO. 56041590 / AX 300 / AX 400 - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTIONAL HARD FLOOR KITS
The AX 300 and 400 come standard with a carpet tool. Optional hard floor kits include a squeegee, squeegee mount, support wheel and
solution adjustment valve. Brushes for hard floor use are not included in these kits and must be ordered separately.
DESCRIPTION
AX 300
AX 400
Hard Floor Kit** ................................................................... 56264369 ............. 56262164
** Kits do not include brushes.
OPTIONAL HARD FLOOR BRUSHES
The AX 300 and 400 come standard with a carpet brush. Optional brushes for use on hard floors must be ordered separately. If you plan to
clean hard floors, you should also order the Hard Floor Kit (see above) for your machine.
DESCRIPTION
AX 300
AX 400
Standard Carpet Brush (Black Bristles) ............................... 56264357 ............. 56264358
Optional Smooth Hard Floor (Blue Bristles)......................... 56264360 ............. 56264363
Optional Light Grit Hard Floor (Gray 500) .......................... 56264361 ............. 56264364
Optional Grout Grit Hard Floor (Gray 240) .......................... 56264362 ............. 56264365
OPTIONAL ACCESSORY TOOLS
The AX 300 and 400 can be fitted with optional attachments which must be ordered separately. To use these accessory tools, attach the
accessory vacuum hose to the left tube on the recovery tank cover. Attach the accessory solution hose to the fitting on the right rear side of
the machine. Connect the other end of the vacuum and solution hoses to the accessory tool. When using accessory tools, turn the brush
motor switch OFF.
CARPET TOOLS
REF. NUMBER
4' Stainless Steel Drag Tool ................................................ 56204223
Stainless Steel Hand Tool ................................................... 56204224
Plastic Hand Tool ................................................................ 56800385
Plastic & Stainless Drag Tool .............................................. 56800390
15' Scrub and Vac Hose ...................................................... 56249318
HARD FLOOR TOOLS
REF. NUMBER
4' Scrub and Vac Wand ....................................................... 56204197
15' Scrub and Vac Hose ...................................................... 56249318
TECHNICAL SPECIFICATIONS (as installed and tested on the unit)
Model
Voltage/frequency
Rated Power
AX 300
230 / 50
1500
AX 400
230 / 50
1500
AX 400
100 / 50/60
1220
V/Hz
W
Protection Class (electrical)
Protection grade (mec, moist, dust)
Sound Pressure Level (at 1.5m)
Total Weight
IP34
72.8
60
IP34
72.8
78
N/A
72.8
78
dB(A)/20µPa
kg
14 - FORM NO. 56041590 / AX 300 / AX 400
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Austria (Sales Sub)
Nilfisk-Advance GmbH
Voralberger Allee 46
A-1230 Wien
Holland (Sales Sub)
Nilfisk-Advance B.V.
Camerastraat 9 (2e verdieping)
1322 BB Almere
Phone: +43
1616 58 30 22
Fax: +43
Phone: +31
36 546 07 00
Fax: +31
info@nilfisk-advance.at
Belgium (Sales Sub)
Nilfisk-Advance NV/SA
Doornveld Sphere Business Park
Industrie Asse 3, No. 11
B-1731 Zellik-Asse
1616 58 30 40
Postbus 60112
36 523 51 48
1320 AC Almere
Ireland (Sales Sub)
Nilfisk-Advance Limited
28 Sandyford Office Park
Sandyford, Dublin 18
Ireland
Phone: +32
(0)2467 60 50
Fax: +32
Phone: +35
3 12 94 38 38
Fax: +35
(0)2463 44 16
Czech Republic (Sales Sub)
Nilfisk-Advance s.r.o.
Lysinská 44/1863
3 12 94 38 45
Italy (Prod & Sales Sub)
CFM SpA
Phone: +420
2 44 09 09 12
+420
Phone: +39
0377 /414021
/45 1124
Nilfisk-Advance Div. Guardamiglio
Localita Novella III
143 00 Praha - Modrany
Czech Republic
2 44 09 09 21 4
Fax: +420
I-26862 Guardamiglio (Mi)
Fax: +39
0377 51 443
2 44 40 23 93
Italy (Prod & Sales Sub)
CFM S.p.A.
Phone: +39
059 973 0000
Fax: +39
Denmark
Nilfisk-Advance A/S
Sognevej 25
Phone: +45
43 23 81 00
Fax: +45
Via Porrettana 1991
I-41059 Zocca (Modena)
DK-2605 Brøndby
mail@nilfisk-advance.dk
Denmark (Prod. Sub)
Gerni A/S
059 973 0099
43 43 77 00
Norway (Sales Sub)
Nilfisk-Advance AS
Ulvenveien 89C
Phone: +47
23 06 75 00
Fax: +47
Phone: +45
89 12 22 00
Fax: +45
N-0581 Oslo
Myntevej 2
23 06 75 01
DK-8900 Randers
Poland (Sales Sub)
Nilfisk-Advance Sp.Z.O.O.
05-800 Pruszków
86 43 14 81
Phone: +48
22 738 37 50
Fax: +48
Denmark (Sales Sub)
Nilfisk-Advance Nordic A/S
Sognevej 25A
Phone: +45
43 23 40 50
Fax: +45
ul. 3-go MAJA 8
Poland
22 738 37 51
Postbox 344
Portugal (Sales Sub)
Nilfisk-Advance, Lda.
Sintra Business Park
Zona Industrial Da Abrunheira
Edificio 1, 1o A
DK-2605 Brøndby
kundeservice@nilfisk-advance.dk
France (Sales Sub)
Nilfisk-Advance S.A.
27 avenue de la Baltique
Villebon sur Yvette
P.B. 246
43 23 40 60
Phone: +35
121 911 2670
Fax: +35
121 911 2679
Phone: +33
1695 98 700
Fax: +33
P-2710-089 Sintra
Russia (Sales Sub)
Nilfisk-Advance LLC
Vyatskaya str. 27, bld. 7
127015 Moscow
Phone: 7
1695 98 701
095 783 9602
Fax: +7
F-91944 Courtaboeuf Cedex
info@nilfisk-advance.fr
Germany (Sales Sub)
Nilfisk-Advance AG
Siemensstrasse 25-27
Postfach 1361
Russia
095 783 9603
Spain (Sales Sub)
Nilfisk-Advance S.A.
Torre D’Ara
Phone: +34
93 741 2400
Fax: +34
Phone: +49
4101 3990
Fax: +49
Passeig del Rengle, 5 Pl.10
E-08302 Mataró (Barcelona)
nilfisk@nilfisk-advance.es
Sweden (Sales Sub)
Nilfisk -Advance A/S
Sjöbjörnsvägen 5
93 757 8020
D-25462 Rellingen
info@nilfisk-advancede
Greece (Sales Sub)
Nilfisk-Advance A.E.
8, Thoukididou Str.
Argioupoli
4101 39 91 91
Phone: +46
8555 94400
Fax: +46
Tel.: +30
Box 44045
210 963 3443
Fax: +30
S-100 73 Stockholm
info@nilfisk-advance.se
8555 94430
Gr - 164 52 Athens
Greece
210 965 0975
Download from Www.Somanuals.com. All Manuals Search And Download.
Sweden (Prod.)
Nilfisk-Advance A/S
Åmål Branch
Hong Kong (Sales Sub)
Nilfisk-Advance Ltd.
2001 HK Worsted Mills Ind’l Bldg.,
31-39 Wo Tong Tsui St.
Kwai Chung, Hong Kong
Japan (Sales Sub)
Phone: +46
5321 7500
Fax: +46
Phone: +852
2427 5951
Fax: +852
2487 5828
Strömsbergsgatan
Box 127
5321 7595
S-662 23 Åmål
Nilfisk-Advance Inc.
Phone: +8145
942 7741
Switzerland (Sales Sub)
Nilfisk-Advance AG
Ringsstrasse 19
Phone: +41
71 92 38 444
Fax: +41
3-17-40-101 Chigasaki Higashi
Tsuzuki-ku, Yokohama 224-0033
Japan
Fax: +8145
942 6545
Kirchberg/Industrie Stelzl
CH-9500 Wil
71 92 35 283
Malaysia (Sales Sub)
Nilfisk-Advance Sdn Bhd
No. 21, Jalan SS 25/41
Mayang Industrial Park
47301 Petaling Jaya
Selangor, Malaysia
UK (Sales Sub)
Nilfisk-Advance Limited
Newmarket Road
Phone: +60 3
7956 8188
Fax: +60 3
7966 6828
Phone: +44
1284 763163
Fax: +44
Bury St. Edmunds
UK-Suffolk IP33 3SR
USA (Prod.)
1284 750 562
New Zealand (Sales Sub)
Nilfisk-Advance Limited
Danish House
Phone: +64(0)9
525 0092
Nilfisk-Advance Inc.
14600 21.st Avenue North
Plymouth, MN 55447-3408
USA (Sales Sub)
Phone: +1 763
745 3500
6 Rockridge Avenue
Penrose 92-829
Fax: +64(0)9
525 6440
Fax: +1 763
745 3718
Auckland1135
Postal addresse:
Nilfisk-Advance America Inc.
300 Technology Drive
Malvern, PA 19355
Canada (Sales Sub)
Nilfisk-Advance Canada Comp.
396 Watline Avenue
Mississauga, Ontario L4Z 1X2
Phone: +1 610
647 6420
Private Bag 92 825
Auckland
Fax: +1 610
647 6427
New Zealand
Singapore (Sales Sub)
Nilfisk-Advance Pte. Ltd.
22,Woodlands Industrial Park E1
Singapore 757740
Phone: + 65
6 7599100
Fax: +65
Phone: + 1 905
712 3260
Fax: +1 905
712 3255
sales@nilfisk-advance.com.sg
Taiwan, ROC (Sales Sub)
Nilfisk-Advance Ltd.
Taiwan Branch (H.K.)
1F, No. 193, Sec.2
7599133
Phone: +886
2 2239 8812
Fax: +886
Australia (Sales Sub)
Nilfisk-Advance Pty. Ltd.
48 Egerton Street
Phone: +61(0)2
9648 2700
Silverwater, NSW 2128
Postal addresse:
Fax: +61(0)2
9648 2711
Xing Long Rd., Taipei
Taiwan, R.O.C.
2 2239 8832
PO Box 6046
Thailand (Sales Sub)
Nilfisk-Advance Co. Ltd.
89 Soi Chokechai-Ruammitr
Viphavadee-Rangsit Road
Ladyao, Jatuchak, Bangkok 10900
Thailand
Silverwater. NSW 1811
info@nilfisk-advance.com.au
China (Shenzhen)
Nilfisk-Advance (Shenzhen) Ltd
Blok 3, Unit 130, 1001 Honghua Road
Int. Commercial & Trade Center
Fuitian Free Trade Zone
518038 Shenzhen
Phone: +66 2
275-5630
Fax: +66 2
691-4079
Phone: +86 755
8359 7937 el.
8359 7939-42
Fax: +86 755
8359 1063
P.R. China
China (Suzhou)
Nilfisk-Advance Professional
Phone: +86 512
Cleaning Equipment (Suzhou) Co. Ltd. 8918 5656
306 Su Hong Zhong Road, Build. 2
Suzhou Industrial Park
215021 Suzhou
Fax: +86 512
8918 5666
P.R. China
Download from Www.Somanuals.com. All Manuals Search And Download.
_____________________________________________________
TYPE: AX300, AX400
EU Overensstemmelseserklæring
Tæpperensemaskine
DK
Déclaration CE de conformité
Injecteur- extracteur
B, F
Maskinen er fremstillet i overensstemmelse med følgende
direktiver:
Cette machine a été fabriquée conformément aux directives
suivantes:
Maskindirektiv: 98/37/EØF
EMC-direktiv: 89/336/EØF 92/31/EØF 93/68/EØF 98/13/EOF
Réglementation machine: 98/37/CEE
Réglementation
CEM:
89/336/CEE,92/31/CEE,93/68/CEE,98/13/CEE
Règlement basse tension: 73/23/CEE 93/68/CEE
Normes harmonisées: EN 60 335-2-67
Lavspændingsdirektiv: 73/23/EØF 93/68/EØF
Harmoniserede standarder: EN 60 335-2-67
EU Överensstämmelseförsäkran
Golvvårdsmaskin
S, FIN
EG-conformiteitsverklaring
Sproei-extractie machine
NL, B
Maskinen är tillverkad i överensstämmelse med följande
direktiver:
Deze machine is vervaardigd overeenkomstig de volgende
richtlijnen:
Maskindirektiv: 98/37/EEG
Machine richtlijn: 98/37/EEC
EMC-direktiv: 89/336/EEG 92/31/EEG 93/68/EEG 98/13/EEG
Lågspänningsdirektiv: 73/23/EEG 93/68/EEG
Harmoniserade standarder: EN 60 335-2-67
EMC-richtlijn: 89/336/EEC 92/31/EEC 93/68/EEC 98/13/EEC
Laagspanning richtlijn: 73/23/EEC 93/68/EEC
Geharmoniseerde normen: EN 60 335-2-67
Declaración de conformidad de la CEE
Máquina inyección/extracción
EU Declaration of Conformity
GB, IRL
E
Spray extraction machine
This machine was manufactured in conformity with the following
directives and standards:
Esta máquina ha sido fabricada en conformidad a las siguientes
normativas:
Machine Directive: 98/37/EEC
Normativa de la máquina: 98/37/CEE
EMC-directive: 89/336/EEC 92/31/EEC 93/68/EEC 98/13/EEC
Low voltage directive: 73/23/EEC 93/68/EEC
Harmonized standards: EN 60 335-2-67
Dichiarazione di conformità - CEE
Macchina ad estrazione
Normativa EMC: 89/336/CEE 92/31/CEE 93/68/CEE 98/13/CEE
Normativa sobre baja tensión: 73/23/CEE 93/68/CEE
Normas armonizadas: EN 60 335-2-67
I
EU Declaração de conformidade da CE
Máquina de injecção/extrcção
P
È prodotto in conformità alle disposizioni contenute nelle Direttive
del Consiglio dei Ministri:
Esta máquina foi fabricada em conformidae com as seguintes
directrizes:
M-direttiva: 98/37/EEC
Directriz de maquinaria: 98/37/CEE
EMC-direttiva: 89/336/EEC 92/31/EEC 93/68/EEC 98/13/EEC
LV-direttiva: 73/23/EEC 93/68/EEC
Norme armonizzate: EN 60 335-2-67
Directriz EMC: 89/336/CEE 92/31/EEC 93/68/CEE 98/13/CEE
Directriz de baixa voltagem: 73/23/CEE 93/68/CEE
Normas harmonizadas: EN 60 335-2-67
EG – Konformitätserklärung
Sprühextraktionsmaschine
D, A
EU:n yhdenmukaisuudesta direktiiveihin
Painehuuhtelukone
FIN
On valmistettu noudattaen yhteisön määräämiä direktiivejä:
Diese Maschine wurde gemäβ den folgenden Richtlinien
hergestellt:
Maschinerichtlinie: 98/37/EWG
M-direktiivi: 98/37/CEE
EMV-Richtlinie: 89/336/EWG 92/31/EWG 93/68/EWG 98/13/EWG
Niederspannungsrichtlinie: 73/23/EWG 93/68/EWG
Harmonisierte normen: EN 60 335-2-67
EMC-direktiivi: 89/336/CEE 92/31/CEE 93/68/CEE 98/13/CEE
LV-direktiivi: 73/23/CEE 93/68/CEE
Yhdenmukaistetut standardit: EN 60 335-2-67
EL vastavusdeklaratsioon
ET
∆ηλωσηπροσαρµογης/συóρϕωσης EU
GR
Pihustusmasin
Μηχανηµα καθαρισµου χαλιων ψεκασµου−αναρρóϕησης
Käesolev masin on valmistatud kooskõlas järgmiste direktiivide ja
standarditega:
Masinadirektiiv: 98/37/EEC
Το µηχανηµα ιχει καταοκευαοτει ονµψωϖα µε τις παρακατω προσ
ιαγραψες:
Προσιαγραωη µηχανηµατος: 98/37/EEC
Elektromagnetilise sobivuse direktiiv: 89/336/EEC 92/31/EEC
93/68/EEC 98/13/EEC
Madalpinge direktiiv: 73/23/EEC 93/68/EEC
Ühtlustatud standardid: EN 60 335-2-67
Προσιαραψη−EMC:
89/336/EEC,92/31/EEC,93/68/EEC,98/13/EEC
Προσιαγραψη χαµηλης ταοεως: 73/23/EEC 93/68/EEC
Εναρµονισµενα προτυπα: EN 60 335-2-67
©Nilfisk-Advance Inc., F00018, 1/03
.pas
Download from Www.Somanuals.com. All Manuals Search And Download.
ES atbilstības deklarācija
LV
Pareiškimas apie atitikimą ES direktyvoms
LT
Šļakatu ekstrakcijas mašīna
Skysčio surinkimo mašina
Šī mašīna izgatavota atbilstoši šādām direktīvām un standartiem:
Mašīnu direktīva: 98/37/EEC
Šis įrenginys pagamintas laikantis tokių direktyvų bei standartų:
Įrengimų direktyva: 98/37/EEC
Elektromagnētiskās savietojamības (EMC) direktīva: 89/336/EEC
92/31/EEC 93/68/EEC 98/13/EEC
EMC direktyva: 89/336/EEC 92/31/EEC 93/68/EEC 98/13/EEC
Zemsprieguma direktīva: 73/23/EEC 93/68/EEC
Saskaņotie standarti: EN 60 335-2-67
Žemos įtampos įrengimų direktyva: 73/23/EEC 93/68/EEC
Harmonizuoti standartai: EN 60 335-2-67
Deklaracija EU o skladnosti
SL
Prehlásenie o súlade EÚ
SK
Stroj za razprševanje čistila
Ta stroj je izdelan v skladu z naslednjimi smernicami in standardi:
Zariadenie na odsávanie povrchového postreku
Toto zariadenie bolo vyrobené v súlade s nasledujúcimi
direktívami a normami:
Smernica o strojih: 98/37/EEC
Direktíva o zariadeniach: 98/37/EEC
Smernica o elektromagnetni združljivosti (EMC): 89/336/EEC
92/31/EEC 93/68/EEC 98/13/EEC
Direktíva EMC: 89/336/EEC 92/31/EEC 93/68/EEC 98/13/EEC
Smernica o nizki napetosti: 73/23/EEC 93/68/EEC
Harmonizirani standardi: EN 60 335-2-67
Direktíva o nízkom napätí: 73/23/EEC 93/68/EEC
Súvisiace normy: EN 60 335-2-67
Deklaracja zgodności z normami UE
PL
EU Prohlášení o shodě
Odsávací stroj
CS
Urządzenie do wysokociśnieniowego prania dywanów
Niniejsze urządzenie zostało wyprodukowane w zgodzie z
następującymi dyrektywami i normami UE:
Tento stroj byl vyroben ve shodě s následujícími
směrnicemi a normami:
Směrnice o strojním zařízení: 98/37/EEC
Směrnice o elektromagnetické kompatibilitě:
89/336/EEC 92/31/EEC 93/68/EEC 98/13/EEC
Dyrektywa dotycząca maszyn: 98/37/EEC
Dyrektywa: kompatybilność elektromagnetyczna 89/336/EEC
92/31/EEC 93/68/EEC 98/13/EEC
Dyrektywa: urządzenia elektromagnetyczne niskonapięciowe
73/23/EEC 93/68/EEC
Zharmonizowane normy: EN 60 335-2-67
Směrnice o nízkém napětí: 73/23/EEC 93/68/EEC
Harmonizované normy: EN 60 335-2-67
EU megfelelőségi nyilatkozat
Permetfelszívógép
HU
Декларация изготовителя о соответствии директивам ЕС
Распылительный пылесос
Ez a gép az alábbi irányelvekkel és szabványokkal összhangban
készült:
Данная машина разработана в соответствии со следующими
инструкциями и стандартами:
Gépészeti irányelvek 98/37/EEC
Инструкция по разработке машин: 98/37/EEC
Инструкция EMC: 89/336/EEC 92/31/EEC 93/68/EEC 98/13/EEC
Инструкция по использованию низких напряжений: 73/23/EEC
93/68/EEC
EMC-irányelvek 89/336/EEC 92/31/EEC 93/68/EEC 98/13/EEC
Kisfeszültségű irányelvek: 73/23/EEC 93/68/EEC
Harmonizált szabványok: EN 60 335-2-67
Согласованные стандарты: EN 60 335-2-67
4.4.2004 .
Larry Doerr, Vice President Operations
Nilfisk-Advance, Inc.
14600 21st Avenue North
Plymouth, MN 55447 USA
Nilfisk-Advance A/S
Sognevej 25
DK-2605 Brøndby, Denmark
©Nilfisk-Advance Inc., F00018, 1/03
.pas
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2004 Printed in USA
Download from Www.Somanuals.com. All Manuals Search And Download.
|