Nespresso Coffeemaker N9 User Manual

N90/N9  
Instructions for use  
1/05  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fig. 1  
Fig. 4  
Fig. 7  
Fig. 2  
Fig. 5  
Fig. 8  
Fig. 3  
Fig. 6  
Fig. 9  
2
3
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of machine:  
1. Water tank filling level indicator  
2. Water tank with handle  
3. Display dialogue system / control panel  
4. ON/OFF key  
4 5 6 7 8  
9
10  
5. Draw-off key small cup (arrow key)  
6. Draw-off key large cup  
7. Steam selection key (arrow key)  
8. Programming key  
3
9. Hot water / steam valve (Fig.3/4)  
10. Shackle  
11. Coffee spout  
2
1
11  
12. Replaceable steam / frothing jet (Fig. 7)  
13. Replaceable hot water jet  
14. Capsule container  
12/13  
14  
15. Drip grate  
15  
16. Water filling level indicator  
17. Drip tray  
16  
18. Power switch  
17  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
JURA NESPRESSO N90/N9  
13. Switching off machine .....................................page 12  
14. Adjusting the water quantity for coffee ................page 12  
15. Programming ................................................page 12  
15.1 Programming the filter ...........................page 12  
15.2 Programming the water hardness...............page 12  
15.3 Programming the steam portion ................page 13  
15.4 Programming the water portion ................page 13  
15.5 Programming the time ............................page 13  
15.6 Programming the automatic switch-on time .page 14  
15.7 Programming the automatic switch-off time .page 15  
15.8 Cup counter..........................................page 15  
15.9 Number of de-scaling operations................page 16  
15.10 Programming the language ......................page 16  
16. Maintenance..................................................page 16  
16.1 Refilling water ......................................page 16  
16.2 Emptying the tray..................................page 17  
16.3 Replacing the filter ................................page 17  
16.4 Unit calcified........................................page 17  
16.5 General cleaning instructions....................page 17  
17. De-scaling.....................................................page 17  
18. Disposal .......................................................page 19  
19. Tips for perfect coffee......................................page 19  
20. Messages......................................................page 20  
21. Problems ......................................................page 21  
22. Legal information ...........................................page 22  
23. Technical Data...............................................page 22  
1. Description of the machine................................page  
2. Safety information ..........................................page  
6
6
6
6
7
7
7
7
7
7
7
8
8
9
9
2.1  
2.2  
2.2  
Warning..............................................page  
Precautions ..........................................page  
Power switch ........................................page  
3. First steps.....................................................page  
3.1  
3.2  
3.3  
Check the mains voltage..........................page  
Check electrical fuse...............................page  
Refill water..........................................page  
4. Commissioning...............................................page  
5. Adjustment of water hardness............................page  
6. Installation of Claris plus filter cartridges ............page  
6.1  
6.2  
Installing the filter.................................page  
Replacing the filter ................................page  
E
7. Rinsing the coffee machine................................page  
8. Drawing off espresso .......................................page 10  
9. Drawing off hot water......................................page 10  
10. Drawing off steam ..........................................page 11  
11. Returning to Coffee Ready ................................page 11  
12. Professional Cappuccino Frother (optional N90).....page 11  
12.1 Drawing off hot milk using the  
Professional Cappuccino Frother ...............page 11  
12.2 Drawing off cappuccino using the  
Professional Cappuccino Frother ...............page 12  
12.3 Cleaning the Professional Cappuccino  
Frother ...............................................page 12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Important information  
2. Safety information  
2.1 Warning  
Thank you very much for purchasing this NESPRESSO coffee  
machine.  
Before using your new machine for the first time, carefully read  
this operating manual and keep it for future reference.  
Children do not realize the dangers involved in using electric ap-  
pliances, for this reason always keep an eye on children when  
they use electric appliances.  
Should you need more information or if you meet with particular  
problems not specified in these operating instructions in sufficient  
detail, either contact us directly or contact your local authorized  
dealer.  
The machine may only be used by instructed persons.  
Never use a defective machine or a machine with a defective  
mains cable.  
Never immerse the machine in water.  
You will also find useful tips on operation and maintenance  
of your NESPRESSO N90/N9 on the website at  
2.2 Precautions  
Never expose the machine to weather (rain, snow, frost), never  
Don’t forget to check out the Knowledge Builder our ani-  
mated operating instructions. LEO, our assistant, will take  
you through all the functions.  
touch the machine when your hands are wet.  
Place the IMPRESSA on a firm, level base that is resistant to  
any water that may leak. Never stand on hot or warm surfaces  
(oven hobs). Keep out of the reach of children.  
If you don’t use the machine for a longer time (holidays, etc.)  
always disconnect the mains cable.  
1. Description of the machine  
The JURA NESPRESSO N90/N9 was specially developed for  
the large number of coffee enthusiasts customers who prefer  
the strong flavour of a perfect espresso. The machine distin-  
guishes itself by its elegant design and its compact dimensions.  
Its sophisticated and innovative design ensures an easy use:  
You can program the water quantity individually and make  
your espresso at the push of a button. This and the proven dia-  
log system are just some of the advantages of this machine. The  
interaction between the aroma capsule and the machine ensure  
extraordinary espresso flavour cup after cup.  
Always disconnect mains cable before cleaning the machine.  
When disconnecting the mains cable never pull on the mains ca-  
ble or the machine itself.  
Never repair or open the coffee machine yourself.  
Any repairs may only be carried out by authorized service shops  
using original spare parts and accessories.  
The machine is connected to mains supply via a mains cable.  
Make sure nobody can trip over the mains cable to prevent in-  
juries and protect the machine against damage. Make sure chil-  
dren and pets cannot reach the machine  
Never put the machine or individual parts of it into a dishwash-  
er.  
Make sure to install the machine at a place with sufficient air cir-  
culation, to prevent overheating of the machine.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
2.3 Power switch  
4. Commissioning  
Actuate the power switch (18) on your NESPRESSO  
Fill the water tank.  
N90/N9 before using the machine for the first time.  
Use the ON/OFF key to switch on the machine.  
SPRACHE / DEUTSCH  
Now, use the arrow keys to select the required language.  
LANGUAGE / ENGLISH  
We recommend that you switch off your NESPRESSO  
N90/N9 with the power switch (18) if you intend not to use  
the machine for longer periods of time (e.g.during holidays)  
Finally, press the programming key to save the language  
settings.  
To ensure perfect operation, please switch the ON/OFF key  
on your NESPRESSO N90/N9 to standby mode. Then switch  
the machine off with the power switch (18).  
FILL SYSTEM – PRESS P  
Press programming key.  
SYSTEM FILLING  
3. First steps  
MACHINE HEATING  
3.1 Check the mains voltage  
RINSE – PRESS DRAW-OFF KEY  
The machine is preset in the factory to the correct mains voltage.  
Check if your local mains supply voltage complies with the infor-  
mation given on the type plate on the underside of the machine.  
Place a cup under the coffee spout and press one of the draw-off  
keys (SMALLCUP or LARGECUP).  
E
RINSING  
READY  
3.2 Check electrical fuse  
The machine is designed for an electric current if 10 Ampères.  
Check if the electrical fuse has sufficient capacity.  
5. Adjustment of water hardness  
In the machine water is heated up. As a result, calcification  
occurs during normal use and is indicated automatically.  
Before using the machine for the first time the hardness of  
the water used must be adjusted. Use the supplied test sticks  
for this.  
3.3 Refill water  
Only use fresh, cold water. Never fill in milk, mineral water  
or other liquids.  
1° German hardness is equivalent to 1.79° French hardness.  
Take out the water tank and thoroughly rinse it with cold tap  
water (Fig. 1)  
Then, fill the water tank and reinstall it. Make sure the tank is  
installed correctly and that it engages properly.  
The machine has 5 hardness degrees which can be used and are  
displayed while you are adjusting the water hardness.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Press programming key to confirm your settings.  
HARDNESS  
The displayed information means the following:  
WATER  
HARDNESS — Water hardness function switched off  
Press the arrow keys a number of times until the following  
message appears:  
WATER  
HARDNESS 1 French Water hardness degree 1.79 – 12.53°  
WATER German water hardness degree 8 to 15°  
HARDNESS 2 French Water hardness degree 14.32 – 26.85°  
WATER German water hardness degree 16 to 23°  
HARDNESS 3 French Water hardness degree 28.64 – 41.17°  
WATER German water hardness degree 24 to 30°  
German water hardness degree 1 to 7°  
EXIT  
Press the programming key to quit the programming mode.  
READY  
If you use a Claris plus filter cartridge, this function is no  
longer available.  
HARDNESS 4 French Water hardness degree 42.96 – 53.7°  
6. Installation of Claris plus filter cartridges  
When the machine leaves the factory it is adjusted to Level 3. You  
can adjust another hardness. To do this, proceed as follows:  
If the Claris plus filter cartridge is installed properly, de-scal-  
ing of the machine is no longer required. . For more infor-  
mation on the Claris plus filter cartridge refer to brochure  
«Claris plus». Hard on limescale. Gentle on your coffee ma-  
chine.»  
Use the ON/OFF key to switch on the machine.  
MACHINE HEATING  
RINSE – PRESS DRAW-OFF KEY  
If you do not use the Claris plus filter cartridge, the machine  
must be de-scaled manually. A message requesting you to re-  
place the filter will appear on the display  
Place a cup under the coffee spout and press one of the draw-off  
keys (SMALLCUP or LARGECUP).  
RINSING  
READY  
For more information on de-scaling refer to Chapter 17.  
Should you have any further questions, please get in touch  
with the responsible after-sales hotline which has been set up  
for you.  
Press the programming key until the machine switches over to  
programming mode.  
FILTER  
For the hotline telephone numbers, refer to last page.  
Press the arrow keys a number of times until the following  
message appears:  
6.1 Installing the filter  
HARDNESS  
Press the programming key to activate the programming step.  
LEVEL 3  
Now, use the arrow keys to select the required hardness.  
Use the ON/OFF key to switch on the machine.  
MACHINE HEATING  
RINSE – PRESS DRAW-OFF KEY  
Place a cup under the coffee spout and press one of the draw-off  
keys (SMALLCUP or LARGECUP).  
LEVEL 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
6.2 Replacing the filter  
RINSING  
READY  
FILTER / READY  
Remove the cartridge holder from the water tank. Carefully  
install the filter cartridge and the cartridge holder in the water  
tank.  
Press the programming key until the machine switches over to  
programming mode.  
FILTER  
Press the programming key to activate the programming step.  
REPLACE  
Move back the cartridge holder until it engages audibly (Fig. 12).  
Fill the water tank with cold, fresh tap water and install it again.  
Press the programming key until the machine switches over to  
programming mode.  
Remove the water tank and replace the Claris plus cartridge by a  
new one.  
FILTER  
Press the programming key to activate the programming step.  
NO  
Fill the water tank with cold, fresh tap water and install it again.  
Press programming key.  
VALVE / OPEN  
Press the arrow keys a number of times until the following  
message appears:  
Place a sufficiently large container (approx. 1 litre) under the hot  
water nozzle and switch the hot water / steam valve to Hot  
Water / Steam (Fig. 4).  
YES  
Press programming key to confirm your settings.  
VALVE / OPEN  
FILTER / RINSING  
The water draw-off operation is stopped automatically  
VALVE / CLOSE  
Turn back the hot water / steam valve to Coffee (Fig. 3).  
E
Place a sufficiently large container (approx. 1 litre) under the hot  
water jet and switch the hot water / steam valve to Hot Water /  
Steam (Fig. 4).  
READY  
FILTER / RINSING  
The water draw-off operation is stopped automatically.  
VALVE / CLOSE  
Turn back the hot water / steam valve to Coffee (Fig. 3).  
The water may be slightly coloured (not harmful).  
7. Rinsing the coffee machine  
READY  
When the machine was switched off and has cooled down in  
the meantime, a rinsing operation is started when the  
machine is switched on again.  
The water may be slightly coloured (not harmful).  
Now you have activated the filter. In Programming Mode the  
water hardness selection function is no longer displayed.  
Use the ON/OFF key to switch on the machine.  
MACHINE HEATING  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
9. Drawing off hot water  
RINSE – PRESS DRAW-OFF KEY  
Place a cup under the coffee spout and press one of the draw-off  
keys (SMALLCUP or LARGECUP).  
You can adjust the water portion individually (see Chapter  
15.4). Install the hot water jet (Fig. 6) to obtain perfect water  
flow..  
RINSING  
READY  
During operation, the hot water / steam jet may heat up.  
However, there is no danger of burns.  
8. Drawing off espresso  
At the start of the water draw-off there can be splashing  
Avoid direct contact with the skin!  
Do not replace the replaceable hot water jet directly after  
drawing off water, because the jet is hot after the draw-off  
operation.  
Use the ON/OFF key to switch on the machine.  
MACHINE HEATING  
RINSE – PRESS DRAW-OFF KEY  
Place a cup under the coffee spout and press one of the draw-off  
keys (SMALLCUP or LARGECUP).  
Use the ON/OFF key to switch on the machine.  
RINSING  
READY  
MACHINE HEATING  
RINSE – PRESS DRAW-OFF KEY  
Open the cover and install a capsule (Fig. 5).  
COVER / CLOSE  
Close the cover again.  
READY  
Place a cup under the coffee spout and press one of the draw-off  
keys (SMALLCUP or LARGECUP).  
RINSING  
READY  
Place a cup under the coffee spout and press the required draw-  
off key (SMALLCUP or LARGECUP).  
Place a cup under the hot water jet.  
Turn the hot water / steam valve to Hot Water / Steam (Fig. 4).  
SMALLCUP or LARGECUP  
Your product is being prepared.  
EJECT CAPSULE  
Open the cover. The capsule is ejected.  
COVER / CLOSE  
Close the cover again.  
WATER / PORTION  
The programmed portion is being prepared..  
VALVE /CLOSE  
Turn back the hot water / steam valve to Coffee (Fig. 3).  
READY  
READY  
You can stop the water draw-off operation by turning the hot  
water / steam valve to Coffee (Fig. 3).  
You can stop the draw-off operation at any time by pressing  
any key.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Turn the hot water / steam valve to Hot Water / Steam (Fig. 4).  
STEAM / PORTION  
Your product is being prepared.  
VALVE / CLOSE  
Turn back the hot water / steam valve to Coffee (Fig. 3).  
10. Drawing off steam  
Steam can be used for heating liquids and frothing milk for  
cappuccino. Make sure that the steam / frothing jet (12) is  
pushed upwards when liquids are heated. Push down the  
frothing aid (Fig. 7) to froth liquids.  
STEAM / READY  
If you do not draw off steam within 1 minute, steam draw-  
off mode is deactivated.  
You can stop the steam draw-off operation by turning the hot  
water / steam valve to Coffee (Fig.3).  
During operation, the hot water / steam jet may heat up.  
However, there is no danger of burns.  
11. Returning to Coffee Ready  
Install the steam / frothing jet (Fig.7) to obtain a perfect  
result.  
Deactivate steam draw-off mode by pressing the steam draw-off  
key again.  
During frothing some water will escape the system before  
the actual steam draw-off. This does not affect the result, e.g.  
when frothing milk.  
VALVE / OPEN  
Place a cup under the steam/hot frothing jet.  
Turn the hot water / steam valve to Hot Water / Steam (Fig. 4).  
E
MACHINE COOLING  
At the start of the water draw-off there can be splashing.The  
steam jet becomes hot. Avoid direct contact with the skin!  
VALVE / CLOSE  
Turn back the hot water / steam valve to Coffee (Fig. 3).  
READY  
Use the ON/OFF key to switch on the machine.  
MACHINE HEATING  
RINSE – PRESS DRAW-OFF KEY  
12. Professional Cappuccino Frother (optional N90)  
Place a cup under the coffee spout and press one of the draw-off  
keys (SMALLCUP or LARGECUP).  
12.1 Drawing off hot milk using the  
Professional Cappuccino Frother  
RINSING  
READY  
To draw off hot milk, you must activate the steam draw-off  
mode first (see Chapter 10 “Drawing off steam”.)  
Press the steam draw-off key.  
MACHINE HEATING  
STEAM / READY  
Turn the selector valve (1) (Fig. 8) to area (3) to draw off hot  
milk.  
Now draw off hot milk by turning the hot water / steam valve to  
Hot Water / Steam (Fig. 4).  
Immerse the frothing aid in the milk to be frothed or liquid to be  
heated.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
12.2 Drawing off cappuccino using the  
Professional Cappuccino Frother  
RINSE – PRESS DRAW-OFF KEY  
Place a cup under the coffee spout and press one of the draw-off  
keys (SMALLCUP or LARGECUP).  
To draw off frothed milk, you must activate the steam draw-off  
mode first (see Chapter 10 “Drawing off steam”.)  
RINSING  
READY  
Turn the selector valve (1) (Fig. 8) to area (2) to draw off frothed  
milk.  
Press the draw-off key of the product to be programmed  
(SMALLCUP or LARGECUP) until the following message is  
displayed:  
Now draw off frothed milk by turning the hot water / steam  
valve to Hot Water / Steam (Fig. 4).  
ENOUGH / COFFEE?  
To draw off coffee again, you must activate Coffee Ready mode  
first (see Chapter 11 “Returning to Coffee Ready”)  
As soon as the required quantity of coffee is drawn off, press the  
draw-off key again.  
Turn the selector switch (1) (Fig. 8) in horizontal position.  
READY  
12.3 Cleaning the Professional Cappuccino Frother  
15. Programming  
Remove the Professional Cappuccino Frother. If you do not  
achieve optimum results, disassemble the flow controller and  
the selector lever (Fig. 8). Thoroughly rinse these parts with  
water  
You can programme the following stages:  
¼ Filter  
¼ Water hardness  
¼ Steam portion  
¼ Water portion  
¼ Time  
As soon as you have frothed enough milk, it is important to clean  
the Professional Cappuccino Frother. Fill water in a jug and  
immerse the intake-tube in the water. Now draw off steam until the  
water/steam mixture flowing into your cup is completely clean.  
Your Professional Cappuccino Frother is clean again.  
¼ Draw offs  
¼ No. of de-scaling operations  
¼ Language  
13. Switching off machine  
15.1 Programming the filter  
READY  
Refer to Chapter 6 “Installing the Claris plus filter cartridge”.  
Use the ON/OFF key to switch off the machine.  
15.2 Programming the water hardness  
14. Adjusting the water quantity for coffee  
Refer to Chapter 5 «Adjusting the water hardness».  
Use the ON/OFF key to switch on the machine.  
MACHINE HEATING  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
15.3 Programming the steam portion  
RINSING  
READY  
Use the ON/OFF key to switch on the machine.  
Press the programming key until the machine switches over to  
programming mode.  
MACHINE HEATING  
RINSE – PRESS DRAW-OFF KEY  
FILTER  
Place a cup under the coffee spout and press one of the draw-off  
Press the arrow keys a number of times until the following  
message appears:  
keys (SMALLCUP or LARGECUP).  
RINSING  
READY  
WATER  
Press the programming key to activate the programming step.  
VALVE / OPEN  
Turn the hot water / steam valve to Hot Water / Steam (Fig. 4).  
ENOUGH / WATER?  
Press the programming key until the machine switches over to  
programming mode.  
FILTER  
Press the arrow keys a number of times until the following  
message appears:  
When the required water quantity is drawn off, turn back the hot  
water / steam valve to Coffee position (Fig. 3).  
STEAM  
Press the programming key to activate the programming step.  
20 SEC.  
WATER  
Press the arrow keys a number of times until the following  
message appears:  
E
Use the arrow keys to adjust the seconds.  
EXIT  
Press the programming key to quit the programming mode.  
READY  
Press programming key to confirm your settings.  
STEAM  
Use the arrow keys to activate the next programming level or  
press the arrow keys until the following message is displayed:  
15.5 Programming the time  
EXIT  
Press the programming key to quit the programming mode.  
You must programme the time if you want to use the auto-  
matic switch-on function.  
15.4 Programming the water portion  
Use the ON/OFF key to switch on the machine.  
Use the ON/OFF key to switch on the machine.  
MACHINE HEATING  
MACHINE HEATING  
RINSE – PRESS DRAW-OFF KEY  
RINSE – PRESS DRAW-OFF KEY  
Place a cup under the coffee spout and press one of the draw-off  
keys (SMALLCUP or LARGECUP).  
Place a cup under the coffee spout and press one of the draw-off  
keys (SMALLCUP or LARGECUP).  
RINSING  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
READY  
RINSE – PRESS DRAW-OFF KEY  
Press the programming key until the machine switches over to  
Place a cup under the coffee spout and press one of the draw-off  
programming mode.  
keys (SMALLCUP or LARGECUP).  
FILTER  
RINSING  
READY  
Press the arrow keys a number of times until the following  
message appears:  
Press the programming key until the machine switches over to  
TIME  
Press the programming key to activate the programming step.  
CLOCK  
Press the programming key to activate the hour setting dialog.  
:—  
programming mode.  
FILTER  
Press the arrow keys a number of times until the following  
message appears:  
TIME  
Press the programming key to activate the programming step.  
CLOCK  
Use the arrow keys to adjust the hours.  
Press programming key to save the hour settings and activate the  
minutes setting dialog.  
Press the arrow keys a number of times until the following  
message appears:  
—:—  
AUTO ON  
Press the programming key to activate the hour setting dialog.  
:—  
Use the arrow keys to adjust the minutes, confirm your settings  
by pressing the programming key.  
TIME  
Press the arrow keys a number of times until the following  
Use the arrow keys to adjust the hours.  
message appears:  
Press programming key to save the hour settings and activate the  
EXIT  
Press the programming key to quit the programming mode.  
READY  
minutes setting dialog.  
—:—  
Use the arrow keys to adjust the minutes, confirm your settings  
by pressing the programming key.  
TIME  
15.6 Programming the automatic switch-on time  
Press the arrow keys a number of times until the following  
message appears:  
Before adjusting the automatic switch-on time you must  
program the time (Chapter 15.5).  
EXIT  
Press the programming key to quit the programming mode.  
READY  
Use the ON/OFF key to switch on the machine.  
MACHINE HEATING  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
15.7 Programming the automatic switch-off time  
EXIT  
Press the programming key to quit the programming mode.  
READY  
You can programme your coffee machine such that it will  
switch off automatically after a certain time. You can pro-  
gramme the switch-off time in a range between 0.5 and 8  
hours, or select —:— (i.e. function switched off).  
15.8 Cup counter  
Use the ON/OFF key to switch on the machine.  
Use the ON/OFF key to switch on the machine.  
MACHINE HEATING  
MACHINE HEATING  
RINSE – PRESS DRAW-OFF KEY  
RINSE – PRESS DRAW-OFF KEY  
Place a cup under the coffee spout and press one of the draw-off  
keys (SMALLCUP or LARGECUP).  
Place a cup under the coffee spout and press one of the draw-off  
keys (SMALLCUP or LARGECUP).  
RINSING  
READY  
RINSING  
READY  
Press the programming key until the machine switches over to  
programming mode.  
Press the programming key until the machine switches over to  
programming mode.  
FILTER  
FILTER  
Press the arrow keys a number of times until the following  
message appears:  
E
Press the arrow keys a number of times until the following  
message appears:  
DRAWOFFS  
Press the programming key to activate the programming step.  
....... (Total Draw-offs SMALL CUP)  
TIME  
Press the programming key to activate the programming step.  
CLOCK  
Press the draw-off keys and the corresponding number of draw-  
offs will be displayed.  
Press the arrow keys a number of times until the following  
message appears:  
Press the programming key to quit the programming dialog.  
AUTO OFF  
DRAWOFFS  
Press the programming key again to activate the programming  
dialog.  
Press the arrow keys a number of times until the following  
message appears:  
5 HRS  
EXIT  
Press the programming key to quit the programming mode.  
READY  
Use the arrow keys to adjust the switch-off time, confirm your  
settings by pressing the programming key.  
TIME  
Press the arrow keys a number of times until the following  
message appears:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Place a cup under the coffee spout and press one of the draw-off  
keys (SMALLCUP or LARGECUP).  
15.9 Number of de-scaling operations  
Use the ON/OFF key to switch on the machine.  
RINSING  
READY  
MACHINE HEATING  
RINSE – PRESS DRAW-OFF KEY  
Press the programming key until the machine switches over to  
programming mode.  
Place a cup under the coffee spout and press one of the draw-off  
keys (SMALLCUP or LARGECUP).  
FILTER  
RINSING  
READY  
Press the arrow keys a number of times until the following  
message appears:  
Press the programming key until the machine switches over to  
programming mode.  
LANGUAGE  
Press the programming key to activate the programming step.  
ENGLISH  
FILTER  
Press the arrow keys a number of times until the following  
message appears:  
Use the arrow keys to adjust the language, confirm your settings  
by pressing the programming key.  
DECALC.  
Press the programming key to activate the programming step.  
....... (Total number of de-scaling)  
Press the programming key to quit the programming dialog.  
DECALC.  
LANGUAGE  
Press the arrow keys a number of times until the following  
message appears:  
EXIT  
Press the programming key to quit the programming mode.  
READY  
Press the arrow keys a number of times until the following  
message appears:  
EXIT  
Press the programming key to quit the programming mode.  
READY  
16. Maintenance  
16.1 Refilling water  
WATER / FILL  
15.10 Programming the language  
If this information is displayed, drawing off products is no  
longer possible. Refill water as described in Chapter 3.3.  
Use the ON/OFF key to switch on the machine.  
READY  
MACHINE HEATING  
RINSE – PRESS DRAW-OFF KEY  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
16.2 Emptying the tray  
16.5 General cleaning instructions  
TRAY / EMPTY  
Never use scrapers, abrasive cloths, sponges or caustic chemicals  
for cleaning.  
If this message appears on the display, you can no longer draw  
off espresso. You must empty the capsule container first.  
Clean the inside and outside of the case using a soft, moist  
cloth.  
Carefully take out the drip tray and the capsule container, it is  
filled with water.  
Clean the replaceable hot water jet and steam/frothing jet after  
each use.  
NO / TRAY  
After heating milk, draw off some water to clean the inside of  
the pivoting jet.  
Empty the drip tray and the capsule container and install it in the  
machine again.  
Disassemble the steam/frothing jet for proper cleaning (Fig. 9).  
READY  
Clean the display dialog system / control panel with a micro-  
The yellow water level indicator appears when the drip tray  
is full.  
fibre cloth.  
The water tank should be rinsed daily and refilled with fresh  
water.  
16.3 Replacing the filter  
If lime-scaling forms in the tank, remove it using a com-  
mercial de-scaling agent. When de-scaling the water tank,  
take it out of the machine.  
After drawing off 50 litres or after 2 months, the filter car-  
tridge will be used up.  
Refer to Chapter 6.2 «Replacing the filter».  
E
Remove the Claris plus filter cartridge, if applicable, before  
de-scaling the water tank.  
If your machine is disconnected from power supply, the time  
is not measured. A message requesting you to replace the  
filter will appear on the display  
17. De-scaling  
The machine features an integrated de-scaling programme. The de-  
scaling operation will take some 40 min.  
16.4 Unit calcified  
During operation, the machine will calcify. The degree of  
scaling depends on the hardness of the water in your region.  
The machine will inform you when de-scaling is required.  
You can still draw off coffee or hot water/steam. However,  
we recommend that you should de-scale the machine  
(Chapter 17) within the next few days.  
Your machine will inform you if it needs de-scaling.  
You can still draw off coffee or hot water / steam and start  
the de-scaling programme later.  
Switch off the system before starting the de-scaling pro-  
gramme. Once started, the de-scaling programme must not  
be interrupted.  
SCALED / READY  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
If applicable, remove the Professional Cappuccino Frother  
(optional accessories) before starting the de-scaling opera-  
tion.  
MACHINE / DECALC.  
VALVE / CLOSE  
Turn back the hot water / steam valve to Coffee (Fig. 3).  
If acidic de-scaling agents are used, remove any splashes and  
drops from sensitive surfaces, in particular surfaces made of  
natural stone and wood, alternatively take appropriate pre-  
ventive measures.  
In any case wait until the de-scaling agent is used up and the  
tank is empty. Never refill de-scaling agent.  
MACHINE / DECALC.  
VALVE / OPEN  
Turn the hot water / steam valve to Hot Water / Steam (Fig. 4).  
MACHINE / DECALC.  
EMPTY / TRAY  
Take out tray, empty it and reinstall it.  
SCALED / READY  
FILL / WATER  
Use the ON/OFF key to switch off the machine.  
Take out and empty the water tank.  
Thoroughly rinse the water tank and fill it with fresh cold tap  
water. Then reinstall it.  
Press programming key until the following message is displayed:  
TRAY / EMPTY  
Take out tray, empty it and reinstall it.  
FILL IN AGENT – PRESS P  
P-TASTE  
Press programming key.  
MACHINE / DECALC.  
VALVE / CLOSE  
JURA de-scaling tablets  
Completely dissolve the content of one blister (3 tablets) in a jug  
containing 0.5 liters of water, and fill the mixture in the water tank.  
Turn back the hot water / steam valve to Coffee (Fig. 3).  
MACHINE / DECALC.  
or  
TRAY / EMPTY  
NESPRESSO De-scaling Kit  
Dissolve 1 pack of de-scaling agent in 0.5 litres of water and fill  
the mixture in the water tank.  
Take out tray, empty it and reinstall it.  
READY  
The machine will be switched off automatically after a few sec-  
onds.  
Reinstall the water tank.  
Press programming key.  
After the de-scaling, clean the aluminium front using a  
slightly moist cloth.  
VALVE / OPEN  
Put a sufficiently large container under the hot water jet  
Turn the hot water / steam valve to Hot Water / Steam (Fig.4).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
18. Disposal  
Please return the machine to your local dealer, the service shop or  
to JURA for proper disposal.  
19. Tips for perfect coffee  
Preheating cups  
You can preheat the cups using hot water or steam. The smaller the  
coffee you want to draw off, the more important preheating is  
Sugar and cream  
Stirring coffee/tea will result in heat being released. Adding re-  
frigerated cream or milk will reduce the temperature of the coffee  
significantly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
20. Messages  
Cause  
Remedy  
WATER / REFILL  
Water tank is empty.  
Refill water  
Water level indicator jammed  
Empty tank, rinse and install again  
Tank calcified; water level-  
Remove tank, de-scale, rinse thoroughly, fill and  
indicator jammed  
install it again  
TRAY / EMPTY  
Capsule container full  
Take out drip tray and capsule container,  
Empty container and tray and install it again  
Message does not disappear after  
Container was removed for less than 8 sec.  
the tank was emptied  
Take out tray for approx. 10 sec. and install it again.  
TRAY / NO  
Tray not engaged properly  
Install tray correctly  
VALVE / OPEN  
Temperature is above the coffee  
Machine must be allowed to cool down to coffee  
temperature  
temp. Open valve (see Chapter 11)  
READY / CALCIFIED  
READY / FILTER  
Machine must be de-scaled  
Carry out de-scaling operation according to  
Chapter 16  
Filter is used up and must be  
replaced  
Replace filter according to Chapter 6.2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
21. Problems  
Problem  
Cause  
Remedy  
Coffee only drips from  
Pyramid plate soiled by coffee  
Start draw-off opeation without capsule (rinse)  
the coffee spout  
powder residues  
Coffee temperature too low  
Machine calcified  
De-scale according to Chapter 17  
first coffee draw-off operation after  
Program automatic switch-on time of machine  
cold start  
Not enough froth while  
frothing up milk  
Frothing aid blocked  
Clean frothing aid (Chapter 16.5)  
Frothing aid in wrong position  
Draw off steam (Chapter 10)  
If the messages or problems are still present, please contact your local authorized dealer or JURA Elektroapparate AG.  
E
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
22. Legal information  
23. Technical Data  
Voltage:  
These operating instructions contain all the information required  
for using, operating and maintaining the machine properly.  
230V AC  
1265 W  
10 A  
Power:  
Knowledge of and compliance with the specifications contained in  
these operating instructions is required for using the machine safe-  
ly as well as for operational safety and safety during maintenance.  
These operating instructions cannot cover any conceivable appli-  
cation. The machine was designed for private household use.  
Additionally we point out that the content of these operating  
instructions does not form part of any previous or existing agree-  
ment, consent or al legal relationship nor does it constitute a  
change of such a(n) agreement, consent or legal relationship. Any  
obligations to be fulfilled by JURA Elektroapparate AG are stipu-  
lated in the corresponding purchase contract, which also contains  
the full and solely applicable warranty stipulations. These contrac-  
tual warranty stipulations are neither extended nor limited by the  
specifications contained in these operating instructions.  
Fuse:  
Safety check:  
Energy consumption Standby:  
approx.1.2 Wh  
Energy consumption «Ready for  
draw-off»:  
approx. 28 Wh  
static max. 19 bar  
1.4 l  
Pump pressure:  
Water tank:  
Capacity of capsule container:  
Length of mains cable:  
Weight:  
14 capsules  
approx.1.1 m  
6.4 kg  
The operating instructions contain information, protected by Copy-  
right. Photocopying or translations into other languages shall not be  
permissible without JURA Elektroapparate AG’s written approval.  
Dimensions (WxHxD):  
25 x 29.5 x 39.5  
The machine complies with the following directives:  
72/23/EWG dated 19/02/1973 “Low Voltage Directive” including  
Modification Directive 93/336/EWG  
89/336/EWG dated 03/05/1989 “EMC Directive” including Modi-  
fication Directive 92/31/EWG  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  

Muratec All in One Printer MFX 1350D User Manual
NeumannBerlin Microphone U 64 User Manual
New Transducers CRT Television 32PF9830 10 User Manual
Nikon Binoculars 550 User Manual
Nissan Automobile 2010 Pathfinder User Manual
Nokia Network Card M10 User Manual
NordicTrack Treadmill NTL16920 User Manual
Nvidia Computer Hardware nVIDIA GeForce 256 User Manual
Oster Bread Maker 5858 User Manual
Panasonic Security Camera BLVT164P User Manual