NEC Projector MT1075 MT1065 User Manual
Portable Projector  
MT1075/MT1065  
English  
Deutsch  
Français  
Italiano  
Español  
Svenska  
User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
•
Allow a minimum of 90 seconds to elapse after turning off the pro-  
jector. Then turn off the main power switch, disconnect the power  
cable and allow 60 minutes to cool the projector before replacing  
the lamp.  
Fire and Shock Precautions  
1. Ensure that there is sufficient ventilation and that vents are unob-  
structed to prevent the build-up of heat inside your projector. Allow  
at least 4 inches (10 cm) of space between your projector and a  
wall.  
2. Prevent foreign objects such as paper clips and bits of paper from  
falling into your projector.  
What's in the Box?  
Make sure your box contains everything listed. If any pieces are miss-  
ing, contact your dealer.  
Do not attempt to retrieve any objects that might fall into your projec-  
tor. Do not insert any metal objects such as a wire or screwdriver  
into your projector. If something should fall into your projector, dis-  
connect it immediately and have the object removed by a qualified  
NEC service personnel.  
Please save the original box and packing materials if you ever need to  
ship your MT1075/MT1065 Projector.  
Lens cap  
3. Do not place any liquids on top of your projector.  
4. Do not look into the lens while the projector is on. Serious damage  
to your eyes could result.  
5. Keep any items such as magnifying glass out of the light path of the  
projector.The light being projected from the lens is extensive, there-  
fore any kind of abnormal objects that can redirect light coming out  
of the lens, can cause unpredictable outcome such as fire or injury  
to the eyes.  
Projector  
Remote Control Cable  
(7N520019)  
6. Do not cover the lens with the supplied lens cap or equivalent while  
the projector is on. Doing so can lead to melting of the cap and  
possibly burning your hands due to the heat emitted from the light  
output.  
OFF  
VIDEO  
A
U
T
O
A
D
POWER  
RGB  
J.  
ON  
VIEWER  
LASER  
SELECT  
PJ  
ASPECT  
FREEZE  
HELP  
3D  
REFORM  
VOLUME  
PO  
INTER  
M
PIC  
-M  
AG  
NIFY  
UTE  
ZOOM  
SLIDE  
FOCUS  
FO  
LDER  
7. The projector is designed to operate on a power supply of 100-240  
V 50/60 Hz AC. Ensure that your power supply fits this requirement  
before attempting to use your projector.  
SLIDE  
LIST  
Remote control  
(7N900363)  
Batteries  
String (24C05051) and  
rivet (24C04531)  
8. Handle the power cable carefully and avoid excessive bending.  
A damaged cord can cause electric shock or fire.  
9. If the projector is not to be used for an extended period of time,  
disconnect the plug from the power outlet.  
10. Do not touch the power plug during a thunderstorm. Doing so can  
cause electrical shock or fire.  
CAUTION  
1. Do not try to touch the ventilation outlet on the front as it can be-  
come heated while the projector is turned on.  
Power cable  
(US: 7N080204)  
(EU: 7N080008)  
USB cable  
(7N520013)  
RGB signal cable  
(7N520032)  
2. Do no use the tilt-foot for purposes other than originally intended.  
Misuses such as gripping the tilt-foot or hanging on the wall can  
cause damage to the projector.  
Quick  
Connect  
3. Enable High-Speed Fan mode if you continue to use the projector  
for consecutive days. (From the Advanced menu, select [Projector  
Options] → [Setup] → [Page 4] → [High Speed Fan Mode].)  
Guide  
User's  
Manual  
Software Utility  
Installation GuNidEeC  
4. Do not unplug the power cable from the wall outlet under any one of  
the following circumstances.  
CD-ROM  
Projector User Supportware  
(7N950432)  
Doing so can cause damage to the projector:  
*
*
While the Hour Glass icon appears.  
While the message "Please wait a moment." appears.This mes-  
sage will be displayed after the projector is turned off.  
MT1065 only  
USB mouse (7N960151)  
For North America only  
Registration card  
Limited warranty  
*
While the cooling fans are running.(The cooling fans continue to  
work for 90 seconds after the projector is turned off).  
5. Do not eject the PC card or LAN card while its data is being accessed.  
Doing so can damage your PC card or LAN card data.  
For Europe only  
Guarantee policy  
6. Do not hold the lens part with your fingers. Doing so could pinch  
fingers or hands causing injury.  
Lamp Replacement  
•
•
To replace the lamp, follow all instructions provided on page E-55.  
Be sure to replace the lamp when the message "The lamp has  
reached the end of its usable life. Please replace the lamp."  
appears. If you continue to use the lamp after the lamp has reached  
the end of its usable life, the lamp bulb may shatter, and pieces of  
glass may be scattered in the lamp case. Do not touch them as the  
pieces of glass may cause injury.  
If this happens, contact your NEC dealer for lamp replacement.  
E-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Selecting Overscan Percentage .............................................................................. E-41  
Selecting Video Filter Level .................................................................................... E-41  
Selecting Noise Reduction Level ............................................................................ E-41  
Signal Type ............................................................................................................ E-41  
Picture Management .................................................................................................. E-41  
User Adjust (when using User 1 to 4) .................................................................... E-41  
Selecting Gamma Correction Mode ................................................................ E-42  
Selecting Color Correction ............................................................................. E-42  
Adjusting Color Temperature and White Balance ............................................ E-42  
Selecting Base Setting .................................................................................... E-42  
Projector Options ...................................................................................................... E-42  
Using 3D Reform ................................................................................................... E-42  
Cornerstone ................................................................................................... E-42  
Keystone ........................................................................................................ E-42  
Using Adapting Color Correction ........................................................................... E-43  
Menu [Page1] ........................................................................................................ E-45  
Selecting Menu Language/Selecting Menu Mode/Customizing the Menu/Select-  
ing Projecting Pointer Icon & Mouse Icon/Selecting Menu Display Time  
Menu [Page 2] ....................................................................................................... E-45  
Turning On/Off Source Display / Turning On/Off Message / Selecting Menu Color  
Setup [Page 1] ....................................................................................................... E-46  
Selecting Projector Orientation/Selecting a Color or Logo for Background/Setting  
RGB 1 or 2 for RGB OUT/Setting Closed Caption  
Setup [Page 2] ....................................................................................................... E-46  
Setting Viewer Options/Selecting Capture Options/Setting Mouse Button and Sen-  
sitivity/Selecting Operation Mode  
Setup [Page 3] ....................................................................................................... E-47  
Selecting Signal Format [Signal Select]  
Setup [Page 4] ....................................................................................................... E-47  
Enabling Auto Adjust/Enabling Auto Start/Enabling Power Management/Enabling  
Power Off Confirmation/Enabling Horizontal and Vertical Keystone Correction Save  
/Enabling High Speed Fan Mode/Selecting Built-in Speakers/Enabling Idle Mode/  
Resetting the Filter Usage Hours  
Setup [Page 5] ....................................................................................................... E-48  
Remote Sensor/S-Video Mode Select  
Setup [Page 6] ....................................................................................................... E-48  
Selecting Communication Speed/Selecting Default Source/Disabling the Cabinet  
Buttons  
Selecting Lamp Mode and Lamp Type ................................................................... E-48  
Selecting Aspect Ratio and Position for Screen ..................................................... E-49  
Selecting Auto Functions ....................................................................................... E-49  
Setting LAN Mode ..................................................................................................... E-50  
IP Address ............................................................................................................. E-50  
Network Type ......................................................................................................... E-50  
WEP ....................................................................................................................... E-51  
Mail ........................................................................................................................ E-51  
Status .................................................................................................................... E-52  
Setting a Password .................................................................................................... E-52  
Security ..................................................................................................................... E-53  
Tools .......................................................................................................................... E-54  
Using Sleep Timer/Using Capture/Using PC Card Files/Using ChalkBoard  
Help ........................................................................................................................... E-54  
Contents ................................................................................................................ E-54  
Information ............................................................................................................ E-54  
Returning to Factory Default ...................................................................................... E-54  
Important Information ..................................................... E-2  
Safety Cautions ............................................................................................................... E-2  
What's in the Box? .......................................................................................................... E-3  
INTRODUCTION .............................................................. E-5  
Introduction to the Projector ........................................................................................... E-5  
Part Names of the Projector ............................................................................................ E-6  
Attaching the lens cap ................................................................................................. E-6  
Carrying the Projector ................................................................................................. E-6  
Top Features ................................................................................................................ E-7  
Terminal Panel Features ............................................................................................... E-8  
Part Names of the Remote Control .............................................................................. E-9  
Battery Installation ................................................................................................. E-11  
Remote Control Precautions .................................................................................. E-11  
Operating Range for Wireless Remote Control ...................................................... E-11  
Using the Remote Control in Wired Operation ....................................................... E-11  
INSTALLATION AND CONNECTIONS ....................................... E-12  
Setting Up the Screen and the Projector ....................................................................... E-12  
Selecting a Location .................................................................................................. E-12  
Throw Distance and Screen Size ............................................................................... E-13  
Making Connections ...................................................................................................... E-14  
When Viewing a DVI Digital Signal ............................................................................ E-14  
Connecting Your PC or Macintosh Computer ............................................................ E-14  
To connect SCART output (RGB) ............................................................................... E-15  
Connecting an External Monitor ................................................................................ E-15  
Connecting Your DVD Player ..................................................................................... E-16  
Connecting Your VCR or Laser Disc Player ............................................................... E-17  
Connecting the Supplied Power Cable ....................................................................... E-17  
PROJECTING AN IMAGE (BASIC OPERATION) ........................... E-18  
Turning on the Projector ................................................................................................ E-18  
Selecting a Source ......................................................................................................... E-19  
Adjusting the Picture Size and Position ......................................................................... E-19  
Correcting the Horizontal and Vertical Keystone Distortion (3D Reform) ...................... E-20  
Optimizing RGB Picture Automatically .......................................................................... E-22  
Turning Up or Down Volume ......................................................................................... E-22  
Using the Laser Pointer ................................................................................................. E-22  
Setting the function switch ............................................................................................ E-23  
Turning off the Projector ............................................................................................... E-23  
CONVENIENT FEATURES ................................................... E-24  
Using the Remote Mouse Function ............................................................................... E-24  
Connecting to your computer for the remote mouse function ................................... E-24  
When using the USB Port .......................................................................................... E-24  
Switching operation mode between computer and projector ..................................... E-24  
Auto 3D Reform ............................................................................................................ E-25  
Turning Off the Image and Sound .................................................................................. E-27  
Freezing a Picture .......................................................................................................... E-27  
Using a Pointer .............................................................................................................. E-27  
Enlarging and Moving a Picture ..................................................................................... E-27  
Getting the On-line Help ................................................................................................ E-27  
Using a USB Mouse ...................................................................................................... E-28  
Using the USB HUB Function ........................................................................................ E-28  
Changing Background Logo .......................................................................................... E-29  
Making Freehand Drawings on a Projected Image (ChalkBoard) ................................... E-29  
USB Memory Device or USB Memory Card Reader Support ......................................... E-29  
MAINTENANCE ............................................................. E-55  
Replacing the Lamp ...................................................................................................... E-55  
Cleaning ........................................................................................................................ E-56  
Cleaning or Replacing the Filter ................................................................................. E-56  
Cleaning the Cabinet and the Lens ............................................................................. E-56  
USING THE VIEWER ........................................................ E-30  
Making the Most out of the Viewer Function ................................................................. E-30  
Operating the Viewer Function from the Projector (playback) ....................................... E-31  
Projecting slides (Viewer) .......................................................................................... E-31  
Auto Play Mode ......................................................................................................... E-32  
Switching to Slides Directly from Other Input Modes ................................................ E-32  
Viewing Digital Images .............................................................................................. E-32  
Storing Images Displayed on the Projector on the PC card (Capture) ....................... E-32  
Deleting Captured Images ......................................................................................... E-33  
Using the PC Card Files Fucntion (PC Card Files) ...................................................... E-33  
TROUBLESHOOTING ........................................................ E-57  
Power Indicator ............................................................................................................. E-57  
Status Indicator ............................................................................................................. E-57  
Lamp Indicator .............................................................................................................. E-57  
Common Problems & Solutions .................................................................................... E-58  
SPECIFICATIONS ........................................................... E-60  
USING ON-SCREEN MENU ................................................. E-34  
Basic Menu Operation ................................................................................................... E-34  
Using the Menus ....................................................................................................... E-34  
Customizing the Menu ............................................................................................... E-34  
Menu tree ...................................................................................................................... E-35  
Menu Elements ............................................................................................................. E-38  
Entering Alphanumeric Characters by Using the Menu .............................................. E-39  
Menu Descriptions & Functions .................................................................................... E-39  
Source Select ............................................................................................................ E-39  
RGB/Video/S-Video/DVI (DIGITAL)/Viewer/LAN/Entry List  
APPENDIX ................................................................... E-62  
Cabinet Dimensions ...................................................................................................... E-62  
Pin Assignments of D-Sub RGB Input Connector .......................................................... E-62  
Compatible Input Signal List ......................................................................................... E-63  
PC Control Codes and Cable Connection ....................................................................... E-64  
PC Control Connector (D-SUB 9P) ................................................................................ E-64  
Using Software Keyboard .............................................................................................. E-64  
Operation Using an HTTP Browser ................................................................................ E-65  
TravelCare Guide ........................................................................................................... E-66  
Picture ....................................................................................................................... E-40  
Sound ........................................................................................................................ E-40  
Image Options ........................................................................................................... E-40  
Selecting Aspect Ratio ........................................................................................... E-40  
Masking Unwanted Area (Blanking) ....................................................................... E-41  
Adjusting Position and Clock ................................................................................. E-41  
Selecting Resolution .............................................................................................. E-41  
E-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
•
•
NEC’s exclusive Advanced AccuBlend intelligent pixel blending tech-  
nology - an extremely accurate image compression technology - of-  
fers a crisp image with UXGA (1600
ן
1200) resolution*3.  
Introduction to the Projector  
This section introduces you to your new MT1075/MT1065 Projector and  
describes the features and controls.  
Supports most IBM VGA, SVGA, XGA, SXGA/UXGA(with Advanced  
AccuBlend)*3, Macintosh, component signal (YCbCr/ YPbPr) or any  
other RGB signals within a horizontal frequency range of 24 to 100  
kHz and a vertical frequency range of 48 to 120 Hz. This includes  
NTSC, PAL, PAL-N, PAL-M, PAL60, SECAM and NTSC4.43 stan-  
dard video signals.  
Congratulations on Your Purchase of The MT1075/  
MT1065 Projector  
The MT1075/MT1065 is one of the very best projectors available today.  
The MT1075/MT1065 enables you to project precise images up to 500  
inches across (measured diagonally) from your PC or Macintosh com-  
puter (desktop or notebook), VCR, DVD player, document camera, a  
laser disc player or Viewer.  
3
*
A UXGA (1600
ן
1200) and SXGA (1280
ן
1024) image are dis-  
played with NEC’s Advanced AccuBlend.  
You can use the projector on a tabletop or cart, you can use the projec-  
tor to project images from behind the screen, and the projector can be  
permanently mounted on a ceiling*1. The remote control can be used  
wirelessly.  
NOTE: Composite video standards are as follows:  
NTSC: U.S. TV standard for video in U.S. and Canada.  
PAL: TV standard used in Western Europe.  
PAL-N: TV standard used in Argentine, Paraguay and Uruguay.  
PAL-M: TV standard used in Brazil.  
PAL60: TV standard used for NTSC playback on PAL TVs.  
SECAM: TV standard used in France and Eastern Europe.  
NTSC4.43: TV standard used in Middle East countries.  
1
*
Do not attempt to mount the projector on a ceiling yourself.  
The projector must be installed by qualified technicians in order  
to ensure proper operation and reduce the risk of bodily injury.  
In addition, the ceiling must be strong enough to support the pro-  
jector and the installation must be in accordance with any local  
building codes. Please consult your dealer for more information.  
•
The supplied remote control can be used without a cable, and you  
can even use the remote control to operate your PC's mouse wirelessly  
from across the room with the built-in remote mouse function.  
•
•
You can control the projector with a PC using the PC Control port.  
USB port allows USB mouse operation*4.  
Features you'll enjoy:  
•
3D Reform enhanced keystone correction that allows not only hori-  
zontal and vertical access but diagonal adjustments.  
4
*
The USB ports meet the USB1.1 specification.  
•
•
The contemporary cabinet design is light, compact, easy to carry,  
and complements any office, boardroom or auditorium.  
•
Wireless*2 or wired networking access provides easy and effective  
presentation delivery.  
Nine pointers are available for your presentation.  
2
*
A wireless LAN card is required.The NEC optional wireless LAN  
card is available. (SWL-2100N-N )  
∗
About this user's manual  
•
Safety protect by Password and Security functions  
The fastest way to get started is to take your time and do ev-  
erything right the first time. Take a few minutes now to review  
the user's manual. This may save you time later on. At the be-  
ginning of each section of the manual you'll find an overview. If  
the section doesn't apply, you can skip it.  
Password and Security features prevent the projector from being used  
by unauthorized individuals.  
Password prevents unauthorized individuals from changing projector  
settings or adjustments. Security offers complete protection by using  
your PC card as a protect key so that the projector will not project a  
signal without insertion of the registered PC card and unauthorized  
use can be discouraged.  
•
•
Picture Management enables users to adjust individual color settings  
to their preferences.  
Eco-mode extends lamp life and reduces total cost of ownership.  
Standard lamp and optional longer life lamp  
•
Power zoom and power focus standard lens provide easy adjust-  
ment.  
•
•
Automatic lens focus provides extreme ease of use  
Automatic Wall Color Correction allows for quick adaptive color cor-  
rection on textured or painted walls and in applications where the  
display is other than screen material. With the built-in image sensor,  
the projector adjusts the colors for screen sizes between 40" and  
150" diagonally.  
•
•
Variable audio out control via projector  
The built-inViewer allows you to start your presentation even when a  
PC is not available at the site.  
•
A high-bright 300 watt DC lamp (240W Eco mode). (MT1075)  
A high-bright 275 watt DC lamp (220W Eco mode). (MT1065)  
•
•
The Standby mode reduces standby power consumption significantly.  
The supplied wireless remote control that operates the projector from  
any angle.  
•
The image can be projected between 25 and 500 inches (measured  
diagonally).  
•
•
The "Capture" enables you to capture the current projected image.  
An image can be projected from in front or behind a screen, and the  
projector can even be installed on the ceiling.  
E-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part Names of the Projector  
Remote Sensor (See page E-11 and -48)  
Controls (See page E-7)  
Image Sensor  
For Auto Focus and Auto Wall Color  
Correction. (See page E-49)  
Remote Sensor (See page E-11 and -48)  
Built-in Security Slot ( )*  
Lens  
Ventilation (inlet)  
Carrying Handle  
Adjustable Tilt Foot Lever  
(See page E-19)  
Adjustable Tilt Foot  
(See page E-19)  
Lens Cap  
Adjustable Tilt Foot Lever  
(See page E-19)  
Ventilation (outlet)  
Heated air is exhausted from here  
Adjustable Tilt Foot (See page E-19)  
*
This security slot supports the MicroSaver® Security System. MicroSaver® is a registered trademark of Kensington Microware Inc. The logo is  
trademarked and owned by Kensington Microware Inc.  
Lamp Cover (See page E-55)  
PC Card Slot 1  
PC Card Slot 2  
Remote Sensor (See page E-11 and -48)  
Filter Cover (inlet)  
1
2
E
OT  
REM  
OL  
PC Card Eject Button  
TR  
ON  
C
PC  
)
R
UB  
E/H  
US  
(
MO  
N
O
/MO  
B
US  
H
L
DIO  
AU  
DIO  
AU  
V
I
IN  
b
UT  
O
DV  
B/C  
D
IO  
AU  
G/Y  
DIO  
AU  
AC IN  
Remote Sensor  
(See page E-11 and -48)  
UT  
O
B
RG  
IN  
IN  
B2  
B1  
RG  
RG  
DIO  
R
AU  
L/MONO  
DIO  
AU  
R
O
L/MON  
DIO  
AU  
O
I
N
DE  
VI  
DIO  
AU  
O
I
N
DE  
VI  
S-  
AC Input  
Stereo Speaker (5W)  
Main Power Switch  
Connect the supplied power cable's three-  
pin plug here, and plug the other end into  
an active wall outlet. (See page E-17)  
When you plug the supplied power cable into  
an active wall outlet and turn on the Main  
Power switch, the POWER indicator turns  
orange and the projector is in standby mode.  
(See page E-18)  
Carrying the Projector  
Attaching the lens cap  
Always carry your projector by the handle.  
To attach the lens cap to the bottom with the supplied string and rivet:  
Ensure that the power cable and any other cables connecting to video  
sources are disconnected before moving the projector.  
When moving the projector or when it is not in use, cover the lens with  
the lens cap.  
1. Thread the string through the  
hole on the lens cap and then  
tie a knot in the string.  
2. Use the rivet to attach the  
string to the bottom of the  
projector.  
E-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11. SELECT ̆̄̇̈ (+) (–) / Volume Buttons  
̆̄ : Use these buttons to select the menu of the item you wish to  
adjust. When no menus appear, these buttons work as a vol-  
ume control.  
Top Features  
11 10  
9
8
5
6
̇̈ : Use these buttons to change the level of a selected menu item.  
A press of the ̈ button executes the selection.When the menus  
or the Viewer tool bar is not displayed, these buttons can be  
used to select a slide, or to move the cursor in Folder List or  
Slide List.  
4
3
When the pointer is displayed, these ̆̄̇̈ buttons move the pointer.  
2
12. ENTER Button  
Executes your menu selection and activates items selected from the  
menu.  
12 13 14  
7
)
1
13. CANCEL Button  
Press this button to exit "Menus". Press this button to return the ad-  
justments to the last condition while you are in the adjustment or  
setting menu.  
1. POWER Button (ON / STAND BY)(  
Use this button to turn the power on and off when the main power is  
supplied and the projector is in standby mode.  
14. PC CARD Access Indicator 1/2  
Lights while accessing a PC card.  
NOTE: To turn on or off the projector, press and hold this button for a mini-  
mum of two seconds.  
2. POWER Indicator  
When this indicator is green, the projector is on; when this indicator  
is orange, it is in standby or idle mode. See the Power Indicator sec-  
tion on page E-57 for more details.  
3. STATUS Indicator  
If this light blinks red rapidly, it indicates that an error has occurred,  
the lamp cover is not attached properly or the projector has over-  
heated.If this light remains orange, it indicates that you have pressed  
a cabinet key while the Control Panel Key Lock is enabled. See the  
Status Indicator section on page E-57 for more details.  
4. LAMP Indicator  
If this light blinks red rapidly, it's warning you that the lamp has reached  
the end of its usable life. After this light appears, replace the lamp as  
soon as possible (See page E-55). If this is lit green continually, it  
indicates that the lamp mode is set to Eco. See the Lamp Indicator  
section on page E-57 for more details.  
5. SOURCE Button  
Use this button to select a video source such as a PC, VCR, DVD  
player, Viewer (PC card), or LAN.  
Press and release this button quickly to display the Source List.  
Each time this button is pressed for a minimum of ONE second, the  
input source will change as follows:  
RGB1 → RGB2 → Video → S-Video → DVI (DIGITAL) → Viewer → RGB1 → ...  
If no input signal is present, the input will be skipped.  
6. AUTO ADJUST Button  
Use this button to adjust Position-H/V and Pixel Clock/Phase for an  
optimal picture (See page E-22).Also press and hold this button for a  
minimum of 2 seconds to enable the Auto Focus or Auto Wall Color  
Correction function (See page E-49).  
7. 3D REFORM Button  
Press this button to enter 3D Reform mode to correct the keystone  
(trapezoidal) distortion, and make the image square.  
8. ZOOM Button (+/–)  
Zoom the lens in and out.  
9. FOCUS Button (+/–)  
Adjust the lens focus.  
10. MENU Button  
Displays the menu.  
E-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. S-VIDEO IN Connector (Mini DIN 4 Pin)  
Here is where you connect the S-Video input from an external source  
like a VCR.  
Terminal Panel Features  
8
9 10 13  
12  
NOTE: S-Video provides more vivid color and higher resolution than the tra-  
ditional composite video format.  
3
S-VIDEO AUDIO Input Jacks R/L (RCA)  
These are your left and right channel audio inputs for stereo sound  
from an S-Video source.  
2
1
6. VIDEO IN Connector (RCA)  
Connect a VCR, DVD player, laser disc player, or document camera  
here to project video.  
7
11  
4
6
5
VIDEO AUDIO Input Jacks R/L (RCA)  
These are your left and right channel audio inputs for stereo sound  
from a Video source.  
1. RGB1 IN / Component Input Connector (Mini D-Sub 15 Pin)  
Connect your computer or other analog RGB equipment such as IBM  
compatible or Macintosh computers. Use the supplied RGB cable to  
connect to your computer. This also serves as a component input  
connector that allows you to connect a component video output of  
component equipment such as a DVD player. This connector also  
supports SCART output signal. See page E-15 for more details.  
7. AUDIO OUT Jacks R/L (RCA)  
You can use this connector to output sound from the currently se-  
lected input source (RGB 1, RGB 2, DVI (DIGITAL),Video or S-Video).  
Output sound level can be adjusted in accordance with the sound  
level of the internal speaker.  
RGB1 AUDIO Input Mini Jack (Stereo Mini)  
8. USB Port (MOUSE/HUB) [Type A]  
This is where you connect the audio output from your computer or  
DVD player when connected to the RGB1 input.A commercially avail-  
able audio cable is required.  
Connect a USB mouse.You can operate the menu or Viewer with the  
USB mouse via this port.  
•
A USB-supported scanner or PC peripheral can be connected  
to this port. (USB Hub Function)  
2. RGB2 IN / Component Input Connectors (BNC)  
Connect R,G,B,H (Horizontal sync) and V (Vertical sync) outputs of  
external equipment.  
9. USB Port (PC) [Type B]  
Connect this port to the USB port (type A) of your PC using the sup-  
plied USB cable.You can operate your computer's mouse functions  
from the remote control. This port also serves as a PC Control port  
by using Dynamic Image Utility 2.0 included on the supplied CD-  
ROM.  
If using a component with a combined sync (SYNC) output, connect  
it to the H/V terminal.  
When using luminance and color-difference signals of HDTV and DVD,  
connect Pr/Cr to the R,Y to the G and Pb/Cb to the B input of the  
projector.  
10. REMOTE (Mini Jack)  
Connect your remote control cable here for wired operation.  
NOTE: The RGB IN 2 does not support Plug & Play.  
RGB2 AUDIO IN Mini Jack (Stereo Mini)  
11. PC CONTROL Port (D-Sub 9 Pin)  
This is where you connect audio output from your computer or DVD  
player connected to the RGB2 input. A commercially available audio  
cable is required.  
Use this port to connect your PC to control your projector via a serial  
cable. This enables you to use your PC and serial communication  
protocol to control the projector. A commercially available RS232C  
cross cable is required to use this port.You can also control the pro-  
jector by using Dynamic Image Utility 2.0 included on the supplied  
CD-ROM.  
To do so you must first have Dynamic Image Utility 2.0 installed on  
your PC.If you are writing your own program, typical PC control codes  
are on page E-64.  
3. DVI IN Connector (24 pin)  
This connector can be used to accept a digital signal output from a  
computer or other sources with a DVI connector.  
DVI AUDIO Input Mini Jack (Stereo Mini)  
This is where you connect the audio output from your computer when  
connected to the DVI input. A commercially available audio cable is  
required.  
12. PC CARD Slot 1/2  
Insert a PC card, commercially available LAN card or NEC optional  
wireless LAN card here.  
There are two slots: Slot 1 and Slot 2.  
4. RGB OUT Connector (Mini D-Sub 15 Pin)  
You can use this connector to loop your computer image to an exter-  
nal monitor from the RGB 1 or 2 input source.  
The RGB analog signal set on RGBOUT Terminal is output during  
idle mode. See pages E-15 and -46.  
NOTE: A dummy card is inserted into each slot at the time of shipment. First  
remove the dummy cards before use.  
13. PC CARD Eject Button 1/2  
Press to eject a PC card partially. Each slot has its own eject button:  
1 and 2.  
RGB AUDIO OUT Mini Jack (Stereo Mini)  
Connect an additional audio equipment here to listen to audio com-  
ing from your computer connected to RGB1, RGB2 or DVI input.  
Note that there is no audio output from this jack during Standby and  
Idle.  
E-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. VIEWER Button  
Press this button to select the Viewer source.  
Part Names of the Remote Control  
NOTE: If you are using a Macintosh computer, you can click either the right-click  
or left-click button to activate the mouse.  
10. AUTO ADJ Button  
Use this button to adjust an RGB source for an optimal picture. Also  
press and hold this button for a minimum of 2 seconds to enable the  
Auto Focus or Auto Wall Color Correction function. See page E-20 or  
-22.  
1. Infrared Transmitter  
T E  
U
I C - M  
Direct the remote control toward  
the remote sensor on the projec-  
tor cabinet.  
R M  
3 D  
E
E  
J
P
11. LASER Button  
S E L E C T  
Press and hold this button to activate the laser pointer.When lit, you  
can use the laser to draw your audience's attention to a red dot that  
you can place on any object.  
L A S E R  
2. LASER Pointer  
Beams a laser light when the LA-  
SER button is pressed.  
E
V I E W  
R G B  
O N  
A U T O A D J .  
E R  
P O W  
V I D E O  
O F F  
12. MENU Button  
Displays the menu for various settings and adjustments.  
3. Remote Jack  
Connect your remote control  
cable here for wired operation.  
3
13. SELECT ̆̄̇̈ (Mouse) Button  
When you are in the Computer mode, these buttons work as a com-  
puter mouse.  
When you are in the Projector mode, which is indicated by lighting  
the PJ button. See page E-24.  
2
1
4
6
5
OFF  
ON  
̆̄ : Use these buttons to select the menu of the item you wish  
to adjust.  
POWER  
8
9
VIDEO  
RGB  
VIEWER  
LASER  
̇̈ : Use these buttons to change the level of a selected menu  
item. A press of the ̈ button executes the selection.  
When the pointer is displayed, these ̆̄̇̈ buttons move the pointer.  
When the pointer is not displayed, these ̆̄̇̈ buttons are for adjust-  
ing the image.  
7
AUTO ADJ.  
10  
11  
12  
13  
14. ENTER (Left Click) Button  
SELECT  
When you are in the Computer mode, this button works as the mouse  
left button. When this button is pressed and held for a minimum of 2  
seconds, the drag mode is set. When you are in the Projector mode,  
which is indicated by lighting the PJ button: Use this button to enter  
your menu selection. It works the same way as the ENTER button on  
the cabinet. See page E-7.  
14  
15  
16  
PJ  
21  
18  
19  
22  
ASPECT FREEZE 3D REFORM  
15. CANCEL (Right Click) Button  
17  
20  
When you are in the Computer mode, this button works as the mouse  
right button. When you are in the Projector mode, which is indicated  
by lighting the PJ button: Press this button to exit the Menus. It works  
the same way as the CANCEL button on the cabinet. See page E-7.  
HELP  
POINTER PIC-MUTE  
SLIDE  
VOLUME MAGNIFY  
23  
24  
25  
27  
ZOOM  
FOCUS  
FOLDER  
SLIDE  
16. PJ Button  
Press this button to switch the SELECT, CANCEL, and ENTER but-  
tons between the Projector mode (lit red) and the Computer mode.  
Press this button or any one of the POWER ON/OFF, MENU, AS-  
PECT, 3D REFORM, HELP, POINTER, MAGNIFY,VIEWER, FOLDER  
LIST or SLIDE LIST buttons to switch to the Projector mode and the  
PJ button lights red.To switch back to the Computer mode, press the  
PJ button again. See page E-24.  
28  
29  
LIST  
26  
4. LED  
Flashes when any button is pressed.  
17. ASPECT Button  
5. POWER ON Button  
Press this button to display the Aspect Ratio select screen.See page  
E-40.  
When the main power is on, you can use this button to turn your  
projector on.  
NOTE: To turn on the projector, press and hold the POWER ON button for a  
minimum of two seconds.  
18. FREEZE Button  
This button will freeze a picture. Press again to resume motion.  
6. POWER OFF Button  
You can use this button to turn your projector off.  
19. 3D REFORM Button  
Press this button to enter 3D Reform to correct the keystone (trap-  
ezoidal) distortion, and make the image square. See page E-20.  
NOTE: To turn off the projector, press and hold the POWER OFF button for a  
minimum of two seconds.  
20. HELP Button  
7. VIDEO Button  
Provides the online help or the set information.  
Press this button to toggle between Video and S-Video inputs.  
21. POINTER Button  
8. RGB Button  
Press this button to display one of the nine pointers; press again to  
hide the pointer.You can move your pointer icon to the area you want  
on the screen using the Select ̆̄̇̈ button. See page E-27.  
Press this button to select RGB 1, RGB 2 or DVI (DIGITAL) inputs.  
Each time this button is pressed, the input source will change as  
follows:  
RGB 1 → RGB 2 → DVI (DIGITAL) → RGB 1 → ...  
E-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
6
5
OFF  
ON  
POWER  
RGB  
8
9
VIDEO  
VIEWER  
LASER  
7
AUTO ADJ.  
10  
11  
12  
13  
SELECT  
14  
15  
16  
PJ  
21  
18  
19  
22  
ASPECT FREEZE 3D REFORM  
17  
20  
HELP  
POINTER PIC-MUTE  
SLIDE  
VOLUME MAGNIFY  
23  
24  
25  
27  
ZOOM  
FOCUS  
FOLDER  
SLIDE  
28  
29  
LIST  
26  
22. PICTURE MUTE Button  
This button turns off the image and sound for a short period of time.  
Press again to restore the image and sound.  
NOTE: When the menu is displayed, a press of this button mutes an image  
and sound without turning off the menu.  
23. VOLUME (+)(–) Button  
Press (+) to increase the volume and (–) to decrease it.  
24. MAGNIFY (+)(–) Button  
Use this button to adjust the image size up to 400%.When the pointer  
is displayed, the image is magnified about the center of the pointer.  
When the image is magnified, the pointer is changed to the magnify-  
ing icon.  
When the pointer is not displayed, the image is magnified about the  
center of the screen. See page E-27.  
25. ZOOM (+)(–) Button  
Zoom the lens in and out.  
26. FOCUS (+)(–) Button  
Adjust the lens focus.  
27. SLIDE (+)(–) Button  
Press (+) to select the next folder or slide and (–) to select the previ-  
ous folder or slide. See page E-31.  
28. FOLDER LIST Button  
Press this button to select Viewer source to display a list of folders  
included in a PC card. See page E-31.  
29. SLIDE LIST Button  
Press this button to select Viewer source to display a list of slides  
included in a PC card. See page E-31.  
NOTE: The default is the Computer mode, which allows you to use the SELECT,  
CANCEL, and ENTER buttons as your computer mouse. When the POWER ON/  
OFF, MENU, ASPECT, 3D REFORM, HELP, POINTER, MAGNIFY, VIEWER, FOLDER  
LIST, or SLIDE LIST button is pressed, the PJ button lights red to indicate that  
you are in the Projector mode. If no buttons are pressed within 60 seconds, the  
light goes out and the Projector mode is canceled.  
E-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Battery Installation  
Remote Control Precautions  
1. Press firmly and slide the battery cover off.  
•
•
•
•
Handle the remote control carefully.  
If the remote control gets wet, wipe it dry immediately.  
Avoid excessive heat and humidity.  
If you will not be using the remote control for a long time, remove the  
batteries.  
•
•
Do not place the batteries upside down.  
Do not use new and old batteries together, or use different types of  
batteries together  
2. Remove both old batteries and install new ones (AA). Ensure that  
you have the batteries' polarity (+/-) aligned correctly.  
Operating Range for Wireless Remote Control  
Remote sensor on the  
projector cabinet  
7m/22 feet  
3. Slip the cover back over the batteries until it snaps into place. Do not  
mix different types of batteries or new and old batteries.  
7m/22 feet  
Remote control  
Remote sensor on the  
projector cabinet  
•
•
The infrared signal operates by line-of-sight up to a distance of about  
22 feet/7 m and within a 60-degree angle of the remote sensor on the  
projector cabinet.  
Note on Remote Control Operation:  
If you press and hold the SELECT ̆̄̇̈ button while installing new  
batteries, the remote control may fail to work properly.  
Should this happen, remove the batteries and then install them again  
without touching the SELECT button.  
The projector will not respond if there are objects between the re-  
mote control and the sensor, or if strong light falls on the sensor.  
Weak batteries will also prevent the remote control from properly  
operating the projector.  
Using the Remote Control in Wired Operation  
Connect one end of the supplied remote cable to the REMOTE mini  
jack and the other end to the remote jack on the remote control.  
REMOTE  
OFF  
ON  
POWER  
RGB  
VIDEO  
AUTO ADJ.  
VIEWER  
LASER  
A
S
P
E
C
T
F
R
E
E
Z
E
3
D
R
E
F
O
R
M
HELP  
P
O
I
N
T
E
R
P
I
C
-
M
U
T
E
V
O
L
U
M
E
M
A
G
N
I
F
Y
SLIDE  
ZOOM  
FOCUS  
FOLDER  
SLIDE  
LIST  
E-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION AND CONNECTIONS  
This section describes how to set up your projector and how to connect video and audio sources.  
Your projector is simple to set up and use.  
But before you get started, you must first:  
1
z Set up a screen and the projector.  
x Connect your computer or video equip-  
ment to the projector. See page  
E-14 – 17.  
c Connect the supplied power cable. See  
page E-17.  
2
NOTE: Ensure that the power cable and any  
other cables are disconnected before moving  
the projector. When moving the projector or  
when it is not in use, cover the lens with the  
lens cap.  
To the wall outlet.  
3
Setting Up the Screen and the Projector  
Selecting a Location  
The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is approximately 25" (0.64 m)  
measured diagonally when the projector is roughly 39.4 inches (1.0 m) from the wall or screen.The largest the image can be is 500" (12.7 m) when  
the projector is about 614.2 inches (15.6 m) from the wall or screen. Use the drawing below as a guide.  
Screen size (Unit: cm/inch)  
609.6(W)X457.2(H)/240(W)X180(H)  
487.7(W)X365.8(H)/192(W)X144(H)  
406.4(W)X304.8(H)/160(W)X120(H)  
Screen Size  
365.8(W)X274.3(H)/144(W)X108(H)  
300"  
240"  
304.8(W)X228.6(H)/120(W)X90(H)  
200"  
243.8(W)X182.9(H)/96(W)X72(H)  
180"  
203.2(W)X152.4(H)/80(W)X60(H)  
150"  
162.6(W)X121.9(H)/64(W)X48(H)  
120"  
121.9(W)X91.4(H)/48(W)X36(H)  
100"  
81.3(W)X61.0(H)/32(W)X24(H)  
61.0(W)X45.7(H)/24(W)X18(H)  
TELE: 50.8(W)X38.1(H)/20(W)X15(H)  
80"  
60"  
40"  
30"  
Lens center  
25"  
1.0  
1.1  
1.4  
2.1  
2.8  
3.5  
6.4  
4.3  
5.3  
7.1  
8.5  
10.6  
Distance (Unit: m)  
E-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Throw Distance and Screen Size  
The following shows the proper relative positions of the projector and screen. Refer to the table to determine the position of installation.  
Distance Chart  
Screen Size  
B
C
α
Diagonal  
inch  
25  
30  
40  
60  
67  
72  
80  
Width  
inch  
20  
24  
32  
48  
54  
58  
64  
67  
72  
80  
96  
120  
144  
160  
168  
192  
209  
216  
240  
280  
320  
360  
400  
Height  
inch  
15  
18  
24  
36  
40  
43  
48  
50  
54  
60  
72  
Wide – Tele  
inch  
Wide – Tele  
degree  
Screen Width  
inch  
8.0  
9.0  
–––  
35.1  
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
39.6  
47.8  
64.4  
–––  
14.4  
14.2  
14.0  
14.0  
14.0  
13.9  
13.9  
13.9  
13.9  
13.8  
13.8  
13.8  
13.8  
13.8  
13.8  
13.7  
13.7  
13.7  
13.7  
13.7  
13.7  
13.7  
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
10.7  
10.7  
10.5  
10.4  
10.4  
10.4  
10.4  
10.4  
10.4  
10.4  
10.3  
10.3  
10.3  
10.3  
10.3  
10.3  
10.3  
10.3  
10.3  
10.3  
–––  
12.0  
18.0  
20.0  
22.0  
24.0  
25.0  
27.0  
30.0  
36.0  
45.0  
54.0  
60.0  
63.0  
72.0  
78.0  
81.0  
90.0  
105.0  
120.0  
135.0  
150.0  
47.4  
72.1  
97.6  
Screen Diagonal  
80.7  
86.9  
96.8  
109.2  
117.5  
130.8  
137.4  
147.4  
164.0  
197.2  
246.9  
296.7  
329.9  
346.5  
396.3  
431.1  
446.0  
495.8  
578.7  
–––  
Screen Height  
Screen center  
84  
90  
101.7  
109.1  
121.4  
146.1  
183.1  
220.1  
244.8  
257.1  
294.1  
320.0  
331.1  
368.1  
429.8  
491.5  
553.2  
614.8  
100  
120  
150  
180  
200  
210  
240  
261  
270  
300  
350  
400  
450  
500  
90  
(B)  
108  
120  
126  
144  
157  
162  
180  
210  
240  
270  
300  
Screen Bottom  
Lens Center  
Throw Angle (Ͱ)  
–––  
–––  
–––  
–––  
Throw Distance (C)  
Screen Size  
B
C
α
Diagonal  
mm  
635  
Width  
mm  
508  
610  
813  
Height  
mm  
381  
457  
610  
Wide – Tele  
mm  
Wide – Tele  
degree  
mm  
191  
229  
305  
457  
511  
549  
610  
640  
–––  
891  
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1005  
1215  
1636  
2479  
2774  
2985  
3322  
3490  
3743  
4165  
5007  
6272  
7536  
8379  
8800  
–––  
14.4  
14.2  
14.0  
14.0  
14.0  
13.9  
13.9  
13.9  
13.9  
13.8  
13.8  
13.8  
13.8  
13.8  
13.8  
13.7  
13.7  
13.7  
13.7  
13.7  
13.7  
13.7  
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
10.7  
10.7  
10.5  
10.4  
10.4  
10.4  
10.4  
10.4  
10.4  
10.4  
10.3  
10.3  
10.3  
10.3  
10.3  
10.3  
10.3  
10.3  
10.3  
10.3  
–––  
762  
B = Vertical distance between lens center and screen center  
C = Throw distance  
α = Throw angle  
1016  
1524  
1702  
1829  
2032  
2134  
2286  
2540  
3048  
3810  
4572  
5080  
5334  
6096  
6629  
6858  
7620  
8890  
10160  
11430  
12700  
1204  
1831  
2050  
2207  
2458  
2583  
2771  
3084  
3711  
4651  
5591  
6217  
6531  
1219  
1361  
1463  
1626  
1707  
1829  
2032  
2438  
3048  
3658  
4064  
4267  
4877  
5304  
5486  
6096  
7112  
8128  
9144  
10160  
914  
1021  
1097  
1219  
1280  
1372  
1524  
1829  
2286  
2743  
3048  
3200  
3658  
3978  
4115  
4572  
5334  
6096  
6858  
7620  
NOTE: Distances may vary +/-5%.  
686  
762  
914  
1143  
1372  
1524  
1600  
1829  
1989  
2057  
2286  
2667  
3048  
3429  
3810  
7471 - 10064  
8129 - 10949  
8410 - 11328  
9350 - 12593  
10917 - 14700  
12484  
14050  
15617  
-
-
-
–––  
–––  
–––  
–––  
–––  
WARNING  
Reflecting the Image  
*
Installing your projector on the ceiling must be done by a quali-  
fied technician. Contact your NEC dealer for more information.  
Using a mirror to reflect your projector's image enables you to enjoy a  
much larger image. Contact your NEC dealer if you need a mirror. If  
you're using a mirror and your image is inverted, use the MENU and  
SELECT buttons on your projector cabinet or ̆̄ buttons on your re-  
mote control to correct the orientation. (See page E-46.)  
*
Do not attempt to install the projector yourself.  
•
To avoid premature lamp failure, do not tilt the front of the projector  
up or down by more than 75° from level.Tilting the front of the projec-  
tor up or down from 15° to 75° might reduce lamp life by up to 25%.  
•
•
Only use your projector on a solid, level surface. If the projector falls  
to the ground, you can be injured and the projector severely dam-  
aged.  
Do not use the projector where temperatures vary greatly. The pro-  
jector must be used at temperatures between 32˚F (0˚C) and 95˚F  
(35˚C).  
•
•
Do not expose the projector to moisture, dust, or smoke. This will  
harm the screen image.  
Ensure that you have adequate ventilation around your projector so  
heat can dissipate. Do not cover the vents on the side or the front of  
the projector.  
E-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Making Connections  
NOTE: When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning on the power to the notebook PC. In most  
cases signal cannot be output from RGB output unless the notebook PC is turned on after connecting with the projector.  
* If the screen goes blank while using your remote control, it may be the result of the computer's screen-saver or power management software.  
* If you accidentally hit the POWER button on the remote control, wait 90 seconds and then press the POWER button again to resume.  
When Viewing a DVI Digital Signal:  
To project a DVI digital signal, be sure to connect the PC and the projector using a DVI-D signal cable (not supplied) before turning on your PC or  
projector. Turn on the projector first and select DVI (DIGITAL) from the source menu before turning on your PC.  
Failure to do so may not activate the digital output of the graphics card resulting in no picture being displayed. Should this happen, restart your PC.  
Do not disconnect the DVI-D signal cable while the projector is running. If the signal cable has been disconnected and then re-connected, an image  
may not be correctly displayed. Should this happen, restart your PC.  
NOTE:  
•
Use the DVI-D cable compliant with DDWG (Digital Display Working Group) DVI (Digital Visual Interface) revision 1.0 standard. The DVI-D cable should be within  
5 m (196") long.  
•
The DVI (DIGITAL) connector accepts VGA (640x480), SVGA (800x600), 1152x864, XGA (1024x768) and SXGA (1280x1024 @ up to 60Hz).  
Connecting Your PC or Macintosh Computer  
DVI IN  
RGB 2 IN  
RGB 1 IN  
DVI-D cable (not supplied)  
Audio cable (not supplied)  
RGB signal cable (supplied)  
To mini D-Sub 15-pin connec-  
tor on the projector. It is recom-  
mended that you use a com-  
mercially available distribution  
amplifier if connecting a signal  
cable longer than the supplied  
one.  
IBM PC or Compatibles (Desktop type)  
or Macintosh (Desktop type)  
PHONE  
NOTE: For older Macintosh,  
PHONE  
use a commercially available  
pin adapter (not supplied) to  
connect to your Mac's video  
port.  
IBMVGA or Compatibles (Notebook type)  
or Macintosh (Notebook type)  
Connecting your PC or Macintosh computer to your projector will en-  
able you to project your computer's screen image for an impressive pre-  
sentation.  
Connecting to RGB 2 IN connectors  
Use a BNC
ן
5 cable to connect your PC and the RGB 2 IN connectors  
on your projector.  
To connect to a PC or Macintosh, simply:  
Connecting Your PC with a DVI Connector  
1. Turn off the power to your projector and computer.  
Use a DVI-D signal cable (not supplied) to connect a DVI connector of  
your PC to the projector.  
2. Use the supplied signal cable to connect your PC or Macintosh to the  
projector.  
3. Turn on the projector and the computer.  
NOTE: The MT1075/MT1065 is not compatible with video decoded outputs of  
4. If the projector goes blank after a period of inactivity, it may be caused  
by a screen saver installed on the computer you've connected to the  
projector.  
NEC ISS-6020 and ISS-6010.  
E-14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To connect SCART output (RGB)  
Before connections: An exclusive SCART adapter (ADP-SC1) and a  
commercially available SCART cable are required for this connection.  
1. Turn off the power to the projector and your video equipment.  
2. Use the NEC ADP-SC1 SCART adapter and a commercially avail-  
able SCART cable to connect the RGB 1 input of your projector and  
a SCART output (RGB) of your video equipment.  
NOTE:  
• Audio signal is not available for this connection.  
• The RGB IN 2 connector does not support Plug & Play.  
3. Turn on the power to the projector and your video equipment.  
4. Use the RGB 1 button on the remote control to select the RGB 1  
input.  
5. Press the MENU button on the remote control to display the menu.  
Projector  
Video equipment  
such as DVD player  
6. From the Advanced menu, select [Projector Options] → [Setup] →  
[Page 3] → [Signal Select RGB1] → [Scart].  
RGB 1 IN  
SCART is a standard European audio-visual connector forTVs,VCRs  
and DVD players. It is also referred to as Euro-connector.  
NOTE: The ADP-SC1 SCART adapter is obtainable from your NEC dealer in Eu-  
rope. Contact your NEC dealer in Europe for more information.  
To RGB IN 1  
Commercially available Female  
SCART cable  
ADP-SC1  
Connecting an External Monitor  
RGB OUT  
LINE IN  
PHONE  
You can connect a separate, external monitor to your projector to simul-  
taneously view on a monitor the RGB analog image you're projecting.  
To do so:  
NOTE:  
•
The RGB OUT connector outputs RGB signal during idle mode (See page E-  
47). When the projector goes into idle mode, the image on an external moni-  
tor disappears for a moment. Note that the RGB OUT connector will not out-  
put RGB signal during Standby mode.  
1. Turn off the power to your projector, monitor and computer.  
2. Use a 15-pin cable to connect your monitor to the RGB OUT (Mini D-  
Sub 15 pin) connector on your projector.  
•
When the projector is in the Idle mode, the image may not be correctly dis-  
played while the cooling fans are running immediately after turning on or off  
the power. Note that the RGB OUT connector will not output RGB signal dur-  
ing Standby mode.  
3. Turn on the projector, monitor and the computer.  
•
Daisy chain connection is not possible.  
E-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Your DVD Player  
RGB 2 IN  
RGB 1 IN  
Optional 15-pin-to-RCA  
(female)
ן
3 cable (ADP-CV1)  
RCA(female)-to-BNC(male)  
adapter (not supplied)  
Component video RCA
ן
3 cable  
(not supplied)  
Audio Equipment  
AUDIO IN  
DVD player  
L
R
AUDIO OUT  
Component  
Cb Cr  
L
R
Y
Audio cable  
(not supplied)  
You can connect your projector to a DVD player with component output  
or Video output. To do so, simply:  
For a DVD player without component video (Y,Cb,Cr) output, use com-  
mon RCA cables (not provided) to connect a composite VIDEO out-  
put of the DVD player to the Video Input of the projector.  
1. Turn off the power to your projector and DVD player.  
3. Turn on the projector and DVD player.  
2. If your DVD player has the component video (Y,Cb,Cr) output, use a  
commercially available component video cable (RCAX3) and the op-  
tional 15-pin-to-RCA (female)
ן
3 cable to connect your DVD player  
to the RGB IN1 or IN2 connector on the projector.  
NOTE: Refer to your DVD player's owner's manual for more information about  
your DVD player's video output requirements,  
E-16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Your VCR or Laser Disc Player  
VIDEO IN  
S-VIDEO IN  
Video cable (not supplied)  
S-video cable (not supplied)  
Audio equipment  
AUDIO IN  
L
R
VCR/ Laser disc player  
AUDIO OUT  
L
R
VIDEO OUT  
S-VIDEO OUT  
Audio cable (not supplied)  
Use common RCA cables (not provided) to connect your VCR, laser  
disc player or document camera to your projector.  
To make these connections, simply:  
NOTE: Refer to your VCR or laser disc player owner's manual for more informa-  
tion about your equipment's video output requirements.  
NOTE: An image may not be displayed correctly when a Video or S-Video source  
is played back in fast-forward or fast-rewind via a scan converter.  
1. Turn off the power to the projector and VCR, laser disc player or  
document camera.  
2. Connect one end of your RCA cable to the video output connector on  
the back of your VCR or laser disc player, connect the other end to  
the Video input on your projector. Use an audio cable (not supplied)  
to connect the audio from your VCR or laser disc player to your audio  
equipment (if your VCR or laser disc player has this capability). Be  
careful to keep your right and left channel connections correct for  
stereo sound.  
3. Turn on the projector and the VCR or laser disc player.  
Connecting the Supplied Power Cable  
Connect the supplied power cable to the projector.  
First connect the supplied power cable's three-pin plug to  
the AC IN of the projector, and then connect the other  
plug of the supplied power cable in the wall outlet.  
1
2
OTE  
M
RE  
L
RO  
NT  
O
C
PC  
)
R
UB  
E/H  
US  
(
MO  
NO  
/MO  
B
US  
H
L
DIO  
AU  
DIO  
AU  
V
UT  
O
I
IN  
b
DV  
B/C  
DIO  
AU  
/Y  
G
DIO  
AU  
AC IN  
UT  
O
B
RG  
B2 IN  
B1 IN  
RG  
RG  
DIO  
R
AU  
L/MONO  
DIO  
R
DIO  
AU  
IN  
EO  
VID  
AU  
IN  
EO  
VID  
S-  
E-17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROJECTING AN IMAGE (BASIC OPERATION)  
This section describes how to turn on the projector and to project a  
picture onto the screen.  
2. Press the ENTER button to execute the selection.  
Turning on the Projector  
NOTE:  
• When plugging in or unplugging the supplied power cable, make sure that the  
main power switch is pushed to the off[O] position. Failure to do so may cause  
damage to the projector.  
SELECT  
• The projector has two power switches: main power switch and POWER button  
(POWER ON and OFF on the remote control)  
• The projector has a feature to prevent itself from being used by unauthorized  
individuals. To use this feature, register your PC card as a protect key. See  
"Security" in "Projector Options" on page E-53 for more details.  
To turn on the main power to the projector, press the Main Power switch  
to the ON position ( I ).  
3. The Basic menu will be displayed in the language you have selected.  
Before you turn on your projector, ensure that the computer or video  
source is turned on and that your lens cap is removed.  
Only after you press the ON/STAND BY button on the projector cabinet  
or POWER ON button on the remote control for a minimum of 2 sec-  
onds will the power indicator turn to green and the projector become  
ready to use.  
To close the menu, press the CANCEL button.  
SELECT  
Note on Startup screen (Menu Language Select screen)  
When you first turn on the projector, you will get the Startup screen.This  
screen gives you the opportunity to select one of the seven menu lan-  
guages: English, German, French, Italian, Spanish, Swedish and Japa-  
nese.  
After this has been done, you can proceed to the advanced menu op-  
eration.  
To select a menu language, follow these steps:  
If you want, you can select the menu language later. See "Language"  
on page E-45.  
1. Use the SELECT ̆ or ̄ button to select one of the seven languages  
for the menu.  
NOTE: To turn the projector on by plugging in the power cable, first turn on the  
Main Power switch to ON and use the menu and enable the "Auto Start" feature.  
(See page E-47.) Immediately after turning on the projector, screen flicker may  
occur. This is not a fault. Wait 3 to 5 minutes until the lamp lighting is stabilized.  
SELECT  
When the Lamp mode is set to Eco, the Lamp indicator will light green.  
If one of the following things happens, the projector will not turn on.  
*
If the internal temperature of the projector is too high, the projector  
detects abnormal high temperature. In this condition the projector  
will not turn on to protect the internal system. If this happens, wait for  
the projector's internal components to cool down.  
*
*
When the lamp reaches its end of usable life, the projector will not  
turn on. If this happens, replace the lamp.  
If the lamp fails to light, and if the STATUS indicator flashes on and  
off in a cycle of six times, wait a full minute and then turn on the  
power.  
E-18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting a Source  
Adjusting the Picture Size and Position  
Place your projector on a flat level surface and ensure that the projector  
is square to the screen.  
Selecting the computer or video source  
Using the Remote Control  
Lift the front edge of the projector to center the image vertically.  
OFF  
ON  
POWER  
RGB  
VIDEO  
AUTO ADJ.  
VIEWER  
LASER  
Press any one of the RGB, VIDEO or  
VIEWER buttons.  
ASPECT FREEZE 3D REFORM  
HELP  
POINTER PIC-MUTE  
VOLUME MAGNIFY  
SLIDE  
ZOOM  
FOCUS  
FOLDER  
SLIDE  
Move the projector left to center the image horizontally on the screen.  
LIST  
NOTE: If no input signal is available, the projector will display a blue background  
(factory preset).  
Selecting from Source List  
Source List  
*
If the projected image does not appear square to the screen then  
use the 3D Reform feature for proper adjustment. See page E-20.  
Adjust the Tilt Foot  
1. Lift the front edge of the projector.  
Press and quickly release the SOURCE button on the projector cabinet  
to display the Source list.Each time the SOURCE button is pressed, the  
input source will change as follows: "RGB1", "RGB2" (computer or DVD  
with component output), "Video" (VCR, document camera, or laser disc  
player), S-Video", "DVI (Digital)", "Viewer" (slides on a PC card), or "LAN"  
(wired or wireless signal aired from a PC).  
To display the selected source, press the ENTER button.  
Detecting the Signal Automatically  
Adjustable Tilt Foot Lever  
Adjustable Tilt Foot  
Adjustable Tilt Foot Lever  
2. Push up the Adjustable Tilt Foot Levers on the right and left sides of  
the projector to extend the adjustable tilt feet (maximum height).  
3. Push down the Adjustable Tilt Foot Levers.  
Press and hold the SOURCE button for a minimum of 1 second, the  
projector will search for the next available input source. Each time you  
press and hold the SOURCE button, the input source will change as  
follows:  
→ RGB1 → RGB2 → Video → S-Video → DVI (Digital)→ Viewer   
If no input signal is present, the input will be skipped. When the input  
source you wish to project is displayed, release the button.  
Press the ENTER button.  
4. Lower the front of the projector to the desired height (max. 44.5mm/  
1.8”) and release the AdjustableTilt Foot Lever to lock the Adjustable  
tilt foot. There is approximately 10 degrees of up and down adjust-  
ment for the front of the projector.  
WARNING: To avoid premature lamp failure, do not tilt the front of the  
projector up or down by more than 15° from level.  
E-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION:  
Correcting the Horizontal and Vertical Key-  
stone Distortion (3D Reform)  
Do not use the tilt-foot for purposes other than originally intended.  
Misuses such as gripping the tilt-foot or hanging on the wall can  
cause damage to the projector.  
Use the 3D Reform feature to correct keystone (trapezoidal) distortion  
to make the top or bottom and the left or right side of the screen longer  
or shorter so that the projected image is rectangular.  
In the following description, 3D Reform (Cornerstone) correction can be  
done with the USB mouse or remote control, cabinet buttons.  
Zoom  
Use the ZOOM Button (+/-) to fine adjust the image size on the screen  
When using the remote control or cabinet buttons:  
1. Project an image so that the screen is smaller than the area of the  
raster.  
2. Pick up any one of the corners and align the corner of the screen  
with the one of the image.  
Projected image  
You can use ZOOM +/- button to enlarge or reduce an image size within  
a range of +/-15%.  
Screen  
Focus  
Use the FOCUS Button (+/-) to obtain the best focus.  
(The drawing shows the upper right corner.)  
3. Press the 3D REFORM button on the remote control.  
Using Auto Focus  
Press and hold the AUTO ADJUST button on the cabinet or AUTO ADJ  
button on the remote control for a minimum of 2 seconds. The focus  
pattern will be displayed for a moment and then the best focus will be  
automatically obtained.  
The CORNERSTONE adjustment screen is displayed.  
NOTE: The Auto Functions have two options: Focus and Wall Color Correction.  
When the AUTO ADJUST or AUTO ADJ button is pressed and held for a mini-  
mum of 2 seconds, either item can be executed. You can decide in advance  
which item will be enabled at the time of execution.  
NOTE: Press the 3D REFORM button to toggle between "Cornerstone" and "Key-  
stone."  
From the Advanced menu, select [Projector Options] → [Auto Functions]. You  
can turn on or off "Focus" and "Wall Color Correction". See page E-49.  
4. Use the SELECT ̆̄̇̈ button to select one icon which points in  
the direction you wish to move the projected image frame.  
NOTE: Just pressing quickly the AUTO ADJUST button on the cabinet or AUTO  
ADJ button on the remote control will enable the Auto Adjust feature instead of  
the Auto Focus feature.  
Screen  
5. Press the ENTER button.  
6. Use the SELECT ̆̄̇̈ button to move the projected image frame  
as shown on the example.  
E-20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Press the ENTER button.  
3. Press the 3D REFORM button on the remote control.  
The Cornerstone adjustment screen is displayed.  
The Cornerstone adjustment screen will disappear when you move  
the USB mouse cursor.  
4. Point to one of the remaining 3 corners and left-click on it.  
Left-click on the corner.  
Screen  
Screen  
8. Use the SELECT ̆̄̇̈ button to select another icon which points  
in the direction.  
5. Do the above step 4 for the other two corners so that the projected  
area becomes smaller than the screen.  
Screen  
On the Cornerstone adjustment screen, select  
“Exit”and then“OK”, or press the CANCEL but-  
ton on the remote control.  
Screen  
The confirmation screen is displayed.  
Left-click on each corner.  
6. To complete the procedure, right-click anywhere on the screen.  
The confirmation screen is displayed.  
9. Press the SELECT ̇ or ̈ button to highlight the [OK] and press the  
ENTER button.  
7. Left-click on "OK".  
This completes the Cornerstone adjustment.  
*
To return the Cornerstone adjustment to the default settings, left-  
click on "Reset" in Step 7.  
This completes the keystone correction.  
Selecting “Cancel” will return to the adjustment screen without saving  
changes (Step 3).  
Selecting "Reset" will return to the factory default.  
Selecting "Undo" will exit without saving changes.  
You can save your Cornerstone changes.The changes are saved when  
you turn off the projector.To do so, select [Projector Options] → [Setup]  
→ [Page 4]. Select the 3D Reform Save check box.This is not selected  
at the time of shipment.  
When using the USB connected to the projector  
Preparation: Connect the USB mouse to the projector. See page E-28.  
* There are limitations of shapes which can be corrected using the Cor-  
nerstone adjustment.  
When adjusting the Cornerstone beyond these limits, you will get the  
message "Out of adjustment range!" and no correction can be done.  
Should this happen, do the Cornerstone adjustment again within the  
allowable range.  
* Due to limitations of accuracy within internal processes, there may be  
some discrepancy of positions between the mouse cursor and corrected  
shape or one corner and the other 3 corners.  
1. Project an image so that the screen is smaller than the area of the  
raster.  
2. Pick up any one of the corners and align the corner of the screen  
with the one of the image. (The drawing shows the upper right cor-  
ner.)  
Projected image  
NOTE: To return the 3D Reform correction setting values to the factory default,  
press and hold the 3D REFORM button for a minimum of 2 seconds.  
Screen  
E-21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE: During 3D Reform adjustment, "Aspect Ratio" and "Screen" may not be  
available. Should this happen, first reset the 3D Reform data and then do each  
setting. Second repeat the 3D Reform adjustment. Changing Aspect Ratio and/  
or Screen setting can limit 3D Reform in its adjustable range.  
Turning Up or Down Volume  
Sound level from the speaker and the AUDIO OUT jack (RCA) on the  
projector can be adjusted.  
The adjustable ranges for 3D Reform are as follows:  
Horizontal ........... Max 35° approx.  
VOLUME  
Vertical ............... Max +50°/-25° approx.  
increase volume  
*
The following are conditions at the above maximum angle when all of  
the following are met  
•
•
Image is projected in Wide (Zoom)  
Resolution is XGA  
decrease volume  
Higher resolution than XGA limits 3D Reform in its adjustable range.  
Menu items should be set as follows:  
Aspect Ratio ............................... 4:3  
Screen Type ................................ 4:3  
Horizontal and Vertical are adjusted separately.  
•
Volume bar  
•
•
A combination of both adjustments limits 3D Reform in its adjustable  
range.  
When "4:3 Fill" is selected in Aspect Ratio, "Cornerstone" and "Hori-  
zontal Keystone" are not available.  
Optimizing RGB Picture Automatically  
Adjusting the Image Using Auto Adjust  
Using the Laser Pointer  
Optimizing RGB image automatically  
Press the Auto Adjust button to optimize an RGB image automatically.  
You can use the laser to draw your audience's attention to a red dot that  
you can place on any object.  
Press and hold the LASER button to activate the laser pointer.  
[Poor picture]  
AUTO ADJ.  
[Normal picture]  
O
F
F
V
ID  
E
O
AUT  
P
O
O
W
A
E
D
R
J.  
R
O
N
G
B
V
IE  
W
E
R
L
A
S
E
R
S
E
L
E
C
T
P
J
A
LASER  
S
P
E
C
T
FREEZE  
H
E
L
3
D
P
R
PO  
E
F
V
INTER  
O
R
O
L
M
U
M
E
PIC-MUTE  
MAGNIFY  
S
L
ID  
E
Z
O
O
M
FOCUS  
FOLDER  
SLIDE  
L
IS  
T
CAUTION:  
Press the Auto Adjust button to fine-tune the computer image or to re-  
move any vertical banding that might appear and to reduce video noise,  
dot interference or cross talk (this is evident when part of your image  
appears to be shimmering). This function adjusts the clock frequencies  
that eliminate the horizontal banding in the image. This function also  
adjusts the clock phase to reduce video noise, dot interference or cross  
talk. (This is evident when part of your image appears to be shimmer-  
ing.)  
• Do not look into the laser pointer while it is on.  
• Do not point the laser beam at a person.  
This adjustment may be necessary when you connect your computer  
for the first time.  
NOTE:  
• Some signals may not be displayed correctly or take time.  
• The Auto Adjust function does not work for component and video signal.  
• If the Auto Adjust operation cannot optimize the RGB signal, try to adjust Clock  
and Phase manually. See page E-41.  
• Pressing and holding the AUTO ADJUST button on the cabinet or AUTO ADJ  
button on the remote control for a minimum of 2 seconds will enable the Auto  
Focus and the Auto Wall Color Correction feature instead of the Auto Adjust  
feature.  
E-22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the function switch  
There are two switches on the bottom of the battery case: an applicable  
projector selector switch (1) and laser enable/disable switch (2). Check  
the projector being used and decide whether to enable or disable laser,  
then set these switches as necessary using the tip of a thin ball-point  
pen. On this model, an applicable projector selector switch (1) is not  
used.  
OFF  
ON  
Switch (2)  
On:  
Off:  
Enabled (the laser lights when the LASER button is pressed)  
[Factory default]  
Disabled (the laser does not light even when the LASER but-  
ton is pressed)  
Disable the laser when using in an environment in which the unit is  
accessible to children.  
Turning off the Projector  
OFF  
ON  
POWER  
RGB  
VIDEO  
AUTO ADJ.  
VIEWER  
LASER  
To turn off the projector:  
First press the POWER (ON/STAND BY) but-  
ton on the projector cabinet or the POWER OFF  
button on the remote control for a minimum of  
two seconds. The power indicator will glow or-  
ange. After the projector turns off, the cooling  
fans keep operating for 90 seconds (Cooling-  
off time).  
ASPECT FREEZE 3D REFORM  
Second, turn off the Main Power switch. The  
power indicator will go out. Last unplug the  
power cable.  
HELP  
POINTER PIC-MUTE  
VOLUME MAGNIFY  
SLIDE  
ZOOM  
FOCUS  
FOLDER  
SLIDE  
LIST  
CAUTION  
Do not unplug the power cable from the  
wall outlet or do not turn off the main power  
under any one of the following circum-  
stances. Doing so can cause damage to  
the projector:  
•
While the Hour Glass icon appears.  
•
While the message "Please wait a mo-  
ment." appears. This message will be  
displayed after the projector is turned  
off.  
•
•
While the cooling fans are running. (The  
cooling fans continue to work for 90 sec-  
onds after the projector is turned off).  
While accessing a PC card. (The PC Card  
Access indicator lights.)  
E-23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONVENIENT FEATURES  
When using the USB Port  
Using the Remote Mouse Function  
For PC, the mouse receiver function can only be used with a Windows  
98, Windows ME, Windows XP or Windows 2000 operating system.  
The built-in remote mouse function enables you to operate your  
computer's mouse functions from the remote control (Computer mode).  
It is a great convenience for clicking through your computer-generated  
presentations.To return to the projector operation mode (Projector mode),  
press the PJ button (lit red).  
USB port (PC)  
Connecting to your computer for the remote mouse  
function  
If you wish to use the remote mouse function, use the supplied USB  
cable to connect the USB port (PC) of the projector and the USB port  
(type A) of your computer.  
NOTE: Depending on the type of connection or OS installed on your computer,  
you may have to restart your computer or change you computer settings.  
USB port  
(Type A)  
NOTE: Wait at least 5 seconds after disconnecting the USB cable before recon-  
necting it and vice versa. The computer may not identify the built-in mouse re-  
ceiver if it is repeatedly connected and disconnected in rapid intervals.  
Switching operation mode between computer and projector  
The three shaded buttons shown on the drawing work as a computer mouse in the Computer mode.  
In the Computer mode the PJ button is not lit.  
Works as a mouse for your computer.  
Works as the SELECT button on the projector.  
OFF  
ON  
OFF  
ON  
POWER  
RGB  
POWER  
RGB  
VIDEO  
AUTO ADJ.  
VIEWER  
LASER  
VIDEO  
AUTO ADJ.  
VIEWER  
LASER  
Works as a right-click button  
for your computer.  
Works as the CANCEL  
button on the projector.  
Lit red  
Not lit  
ASPECT FREEZE 3D REFORM  
ASPECT FREEZE 3D REFORM  
HELP  
POINTER PIC-MUTE  
HELP  
POINTER PIC-MUTE  
Works as the ENTER  
button on the projector.  
VOLUME MAGNIFY  
SLIDE  
VOLUME MAGNIFY  
SLIDE  
Works as a left-click  
button for your com-  
puter.  
ZOOM  
FOCUS  
FOLDER  
SLIDE  
ZOOM  
FOCUS  
FOLDER  
SLIDE  
LIST  
LIST  
•
•
•
When the MENU button is pressed, the PJ button lights red to indicate that you are in the Projector mode, which allows the projector menu  
operation using the three buttons.  
When the POINTER button is pressed, the PJ button lights red to indicate that you are in the Projector mode and that the SELECT ̆̄̇̈  
button works as a moving button for the POINTER or magnified image.  
If no buttons are pressed within 60 seconds, the PJ button's light goes out to indicate that you are in the Computer mode.To enable the projector  
menu operation again, press the PJ button to light red.To move the pointer or a magnified image again, turn off the pointer and then turn on the  
pointer (press the POINTER button two times).  
•
When the PJ button is lit, if you want to use the mouse function immediately, press the PJ button to return to the Computer mode (not lit).  
During Computer mode:  
In Computer mode, by pressing the ENTER button for 2 seconds or more then releasing, the drag mode is set and the drag operation can be  
performed simply by pressing the SELECT ̆̄̇̈ (mouse) button. To drop the item, press the ENTER (left click) button again or press the  
CANCEL (right click) button.  
E-24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Place the projector adjusting its orientation and the angle so that the  
outline (outer frame) of the screen can be positioned within the gray  
area of the projected guide pattern.  
Auto 3D Reform  
Auto 3D Reform automatically corrects distortion by sensing the outline  
or outer frame of your screen with the projector’s built-in image sensor  
to project an image within the screen.  
NOTE:  
•
•
The Auto 3D Reform feature supports screen sizes between 30” and 200”.  
If the screen has the same brightness as its background, the built-in image  
sensor on the front of the projector can fail to recognize the outline or outer  
frame of the screen.  
Should this happen, the Auto 3D Reform feature cannot function.  
If irregular colors, flaw or change of color are seen on the screen, the built-in  
sensor can mistakenly interpret the outline or outer frame of the screen.  
If there is an object between the built-in sensor and the screen, the screen  
cannot be recognized.  
The Auto 3D Reform feature does not support reflective screens. Matt type or  
beads type screens are recommended.  
•
•
Executing the Auto 3D Reform feature  
Screen’s outer frame  
1. Project an image.  
See the user’s manual or the quick connect guide for projecting an  
image.  
5. Highlight [Start] and press the ENTER button.  
The Auto 3D Reform feature has been executed. Processing takes  
about 20 seconds  
*
To cancel, use the SELECT ̇ or ̈ button to highlight [Cancel] and  
press the ENTER button.  
2. Press the 3D REFORM button.  
The 3D Reform (Cornerstone) screen is displayed.  
NOTE:  
*
When “4:3 Fill" is selected in “Aspect”, the Auto 3D Reform feature is not  
available.  
*
If the screen’s outer frame is larger than gray area of the guide pattern as  
shown, the Auto 3D Reform feature does not function.  
Projected area  
*
In the Auto 3D Reform mode, when controlling the projector using PC con-  
trol, you might not be able to make correction. (The projector can be oper-  
ated with Dynamic Image Utility 2.0, Image Express Utility 1.0 and HTTP  
Server function.)  
3. Press and hold the AUTO ADJUST button for a minimum of 2 sec-  
onds.  
A guide pattern that shows available area for Auto 3D Reform is dis-  
played.  
*
The AUTO ADJ. button on the remote control can also be used for  
this purpose.  
Not recommended  
E-25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Screen of Auto 3D Reform  
1. Press the MENU button.  
The Basic menu is displayed.  
*
When the Advanced menu is displayed, go to Step 3.  
2. Use the SELECT ̆ or ̄ button to highlight “To Advanced Menu” and  
press the ENTER button.  
The Advanced menu is displayed.  
3. Use the SELECT ̆ or ̄ button to highlight “Projector Options”.  
Press the SELECT ̈ button.The “3D Reform” option is highlighted.  
4. Use the SELECT ̆ or ̄ button to highlight “Auto Functions”.  
Press the SELECT ̈ button. The “Auto Functions” screen is dis-  
played.  
Focus ............. See page E-49.  
Wall Color  
Correction ...... See page E-49.  
3D Reform ..... Clear a check mark from the check box to disable  
the Auto 3D Reform.  
Adjustment  
Inside ............. Corrects so that an image is projected inside of  
the screen outline.  
Outside .......... Corrects so that an image is projected outside of  
the screen outline.  
Sensitivity ...... If the built-in sensor sensitivity is so strong that it  
recognizes even lines within the screen, select  
“Lower”.If the built-in sensor sensitivity is too weak  
to recognize the screen, select “Higher”.  
NOTE: If you failed to correct for placing the image inside of the screen using  
[Inside], the projector automatically corrects to project the image larger than the  
outer frame of the screen.  
E-26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Turning Off the Image and Sound  
Enlarging and Moving a Picture  
Press the Picture Mute button to turn off the image and sound for a  
short period of time. Press again to restore the image and sound.  
You can enlarge the area you want up to 400 percent.  
To do so:  
PIC-MUTE  
1. Press the Pointer button to display the pointer.  
POINTER  
Freezing a Picture  
Press the Freeze button to freeze a picture. Press again to resume  
motion.  
FREEZE  
2. Move the pointer to the area you want to enlarge.  
Using the Pointer  
SELECT  
You can use one of nine pointers to draw your audience's attention to  
the portion of a projected image you want.  
POINTER  
3. Enlarge the selected area.  
When the Magnify (+) button is pressed, the image is magnified. To  
move the magnified image, use the SELECT button.  
MAGNIFY  
Press the Pointer button to dis-  
play the pointer.  
Press the Pointer button to display the pointer.  
4. Return the image to the original size.  
MAGNIFY  
SELECT  
Use the Select button to move  
the pointer.  
Use the Select button to move the pointer.  
Getting the On-line Help  
You get the contents about Help.  
HELP  
SELECT  
Display Help  
Exit Help  
E-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using a USB Mouse  
Using the USB HUB Function  
Using a USB mouse gives you a smooth operation.A commercially avail-  
able USB mouse is required.  
When using the projector with a PC via the supplied USB cable, both  
the USB port(type A) on the projector can be connected to a USB-sup-  
ported scanner or other USB-supported device. (USB Hub Function)  
(
)
Example: When connecting a PC and a scanner to each USB port re-  
spectively  
USB MOUSE/HUB  
(
)
(
)
USB MOUSE/HUB  
USB PC  
NOTE:  
•
•
The MT1065 comes with a USB mouse.  
There may be some brands of USB mouse that the projector does not sup-  
port.  
An example of how a scanned image is projected  
1. Install the Dynamic Image Utility on your PC.  
NOTE: The Dynamic Image Utility is contained on the supplied CD-ROM. See  
the supplied NEC Software Utility Installation Guide for the installation proce-  
dure.  
Operate the Menus using the USB mouse  
Mouse Cursor  
When connecting a USB mouse to the projector, you get a mouse  
cursor on the screen.  
Unless you use your USB mouse within 10 seconds, the mouse cur-  
sor disappears.  
2. Use your scanner to scan an image.  
NOTE: A scanner driver must be installed on your PC before use.  
Menu Display  
3. Load the scanned image on your PC using the Dynamic Image Util-  
ity.  
Clicking with a mouse button displays the menu.  
Clicking ̈ displays the pull-down menu. To close the menu, click  
anywhere in the background.  
4. Transmit the scanned image from your PC to the projector via the  
USB cable and project the image on the screen.  
Adjusting and Setting Display  
You can select a menu item and click with a mouse button to make  
adjustments and setting.  
NOTE:  
•
The USB HUB function is effective only when “Auto” is selected in Operation  
Mode Select.  
Examples  
•
•
The PCs using the USB Host Controller may not be available.  
When connecting a USB hub to the USB port (type B) on the projector, be  
sure to use a USB hub capable of supplying 500mA per port of downstream  
current.  
Click (or press and hold) the mouse button ̇ or ̈ to adjust the bright-  
ness.Or click and drag the mouse button on the slide bar horizontally  
to adjust it.  
To save the adjustments, click  
. The display is closed. If you click  
anywhere in the background while displaying adjustment and setting  
menu or dialog box, you will get the main menu at the clicking point.  
Using the middle button on the mouse  
The projector supports the middle button on your mouse. With the middle  
button you can use a scroll bar when it is available or click the middle  
button to display or hide the Chalkboard toolbar.  
E-28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Drag ............ Drags to move the tool bar by clicking on the blue part.  
(for USB mouse operation only)  
Changing Background Logo  
Pen .............. Left-click and drag to draw. Left-click [̆] or right-click the  
pen icon to display the pen palette containing four lines of  
different thickness from which you can select a line you  
prefer by left-clicking.  
Color ........... Selects a color. Left-click to display the color palette from  
which you can select a color you prefer by left-clicking.  
Capture ....... Left click to capture and save freehand drawings in the  
PC card.  
Eraser ......... Left-click and drag to erase part of a drawing. Left-click  
[̆] or right-click the eraser icon to display the eraser pal-  
ette containing four eraser of different thickness from which  
you can select an eraser you prefer by left-clicking.  
Clear ........... Left-click to clear the drawing completely from the  
ChalkBoard screen.  
You can change the default background logo using the PC Card Files  
feature.  
NOTE: File size must be 256KB or less. Other file formats than JPEG and BMP  
are not available.  
1. From the menu, select [Tools] → [PC Card Files] to display a list of all  
the files stored in the PC card so that you can select a file you want to  
use as a background logo.  
Drive ............ Switches between PC Card slot 1 and 2.  
Hide ............. Hides the tool bar by left-clicking. Right-clicking anywhere  
on the screen displays the ChalkBoard tool bar again.  
Exit .............. Clears the complete drawing and exits the ChalkBoard.  
NOTE:  
• The menu is not available while you display the ChalkBoard screen.  
• Switching slides clears a drawing completely.  
2. The Logo button allows you to select a background logo from graphic  
files on a PC card and change to it as the background logo.  
USB Memory Device or USB Memory Card  
Reader Support  
3. Use the SELECT ̆ or ̄ button to select a JPEG or BMP file for your  
background logo.  
The projector is compatible with either a USB memory device or USB  
memory card reader which supports the viewer and security features.  
4. Use the SELECT ̈ and then ̄ button to select "Logo".  
5. Press the ENTER on the remote control or the cabinet. You will get  
the confirmation dialog box.  
6. Select "OK" and press the ENTER button. This completes changing  
a logo for the background.  
•
•
•
To use a USB memory device or USB memory card reader, connect  
the device to the USB port (type A).  
Select one of the Drive icons in the Viewer toolbar, Capture toolbar  
and PC Card File setting screen. Up to four drives can be accepted.  
To use a USB memory device as a Protect key for Security function,  
select one from the Drive icons in the Security setting screen.  
*
Once you have changed the background from the NEC logo to an-  
other, you cannot return the logo to background even by using Fac-  
tory Default. To do so, repeat the above steps. The NEC logo file is  
included on the supplied CD-ROM NEC Projector User Supportware  
(Logo/nec_bb_x.jpg).  
NOTE:  
•
Some USB memory devices (brands) or USB memory card readers may not  
work.  
•
You cannot use a USB memory device and a USB memory card reader when  
connecting a USB mouse to the projector.  
Using a USB HUB that allows multiple USB memory devices or card readers  
is not supported either.  
Do not do the following while the USB memory device or USB memory card  
reader’s access indicator is lit or flashing (while data is being accessed.) Do-  
ing so can damage your USB memory device or USB memory card in the  
reader. Back up your data in case it will need to be restored.  
Making Freehand Drawings on a Projected  
Image (ChalkBoard)  
•
The ChalkBoard feature allows you to write and draw messages on a  
projected image.  
*
Pulling out the USB memory device or USB memory card reader from the  
USB port of the projector.  
NOTE: The ChalkBoard feature is available only when a USB mouse is used.  
*
*
Pulling out the memory card from the USB memory card reader  
Turning off the main power switch or unplugging the power cable.  
From the menu, select [Tools] → [ChalkBoard] to display the ChalkBoard  
tool bar that contains the following icons.  
•
•
The drive for ”USB 1-4” is displayed only when the USB memory device or  
USB memory card reader is connected to the projector. The drive for “USB 1-  
4” may be displayed differently from the one in the USB memory card reader.  
Some USB memory devices (brands) or USB memory cards cannot be used  
as Protect key for the projector’s Security function.  
Eraser  
Drive  
Pen  
Exit  
Drag  
Color  
Clear  
Hide  
Capture  
E-29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE VIEWER  
Inserting and Removing a PC Card  
NOTE:  
•
To use the Viewer, first you need to create presentation materials on your PC  
using the Dynamic Image Utility 2.0 contained on the supplied NEC Projector  
User Supportware CD-ROM. For installation, see the printed NEC Software  
Utility Installation Guide. For creating presentation materials, see the Slide  
show function on the on-line manual of the Dynamic Image Utility 2.0.  
NOTE:  
•
•
Do not try to force the PC card into the slot.  
A dummy card is inserted into each slot at the time of shipment. First remove  
the dummy cards before use.  
•
Selecting Viewer sets the audio input for DVI input.  
Making the Most out of the Viewer Function  
Features  
You can view presentation data, capture, and play images on the pro-  
jector. A PC card is used to view presentation data prepared on the  
computer and to capture and play images projected with the projector.  
The Viewer feature allows you to view slides stored on a PC memory  
card (referred to as PC card in this manual) on the projector. Even if no  
computer is available, presentations can be conducted simply with the  
projector. This feature is convenient for holding presentations at meet-  
ings and in offices, as well as for playing images taken on digital cam-  
eras.  
Inserting the PC Card  
•
Hold the PC card horizontally and insert it slowly into PC card  
slot 1 or 2 with its top facing up.  
•
The eject button pops out once the PC card is fully inserted.  
Check that the PC card is fully inserted.  
PC card (not supplied)  
Easy to use  
•
Presentations can be started immediately simply by inserting a  
PC card (not supplied)  
1
2
•
•
•
Easy slide switching  
REMOTE  
L
O
TR  
N
O
C
C
P
)
R
B
U
/H  
E
US  
Remote control operation  
O
N
MO  
(
MO  
B
S
U
L
/
IO  
D
U
A
V
H
T
U
O
IO  
D
U
A
Jumping to list of slides or any specific slide  
IN  
C
A
T
U
O
B
G
R
IO  
D
U
A
R
O
N
O
/M  
L
High quality images  
IO  
D
U
A
VIDEO IN  
•
•
•
High resolution up to 1024 x 768 dots  
24-bit full color playback  
Removing the PC Card  
Press the eject button.The PC card pops out a little.Grasp the edges  
of the PC card and pull it out.  
Viewing of digital camera images  
Simple utility software (for computer)  
•
•
Dynamic Image Utility 2.0 operable on Windows 98/Me/XP/2000  
NOTE: Do not eject the PC card while its data is being accessed.  
Slides can be created by capturing the currently displayed im-  
age  
Eject button  
•
Control screen for displaying lists of slides and editing  
*
Microsoft, Windows and PowerPoint are registered trademarks  
of Microsoft Corporation.  
1
TE  
O
M
E
R
CONTROL  
)
MOUSE/HUB  
R
(
USB  
H
L/M
AUDIO  
AUDIO  
B/Cb  
V
UT  
G/Y  
IN  
C
A
RGB OUT  
AUDIO  
R
L/MONO  
AUDIO  
Direction for Inserting the PC Card  
The PC card has a top and bottom and must be inserted into the PC  
card slot in a specific direction. It cannot be inserted backwards or up-  
side-down. Attempting to force it into the slot in the wrong direction may  
break the internal pin and damage the card slot. Refer to the PC card's  
operating instructions for the proper direction of insertion.  
PC Card Type  
The PC Card slot accepts PCMCIA Type II only.  
NOTE: The projector does not support FAT32 or NTFS formatted flash memory  
card or USB memory device.  
Be sure to use a flash memory card or USB memory device formatted with the  
FAT16 or FAT file system.  
To format your flash memory card or USB memory device in your computer,  
refer to the document or help file that comes with your Windows.  
E-30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When the tool bar is not displayed:  
Operating the Viewer Function from the  
Projector (playback)  
Press the FOLDER LIST button or the SLIDE LIST button on the re-  
mote control to display folders or from a PC card in the projector's PC  
Card slot.  
This section describes the operation for showing slides of presentation  
documents created using the Viewer function with the projector. It is  
also possible to make slides directly from the images projected with the  
projector.  
FOLDER  
Projecting slides (Viewer)  
1. Insert a PC card into the PC card slot.  
Insert the PC card so that the end with the insertion direction arrow  
on the top goes in first.  
Multi cursor (blue marks)  
*
Press the eject button to eject the card.  
Folder  
Folder  
Folder  
Folder  
Folder  
2. Select the "Viewer" from the Source Select menu.  
3. Project slides.  
Checking "Show Folder List", means that selecting Viewer input dis-  
plays a list of the folders in the PC card and if "Auto Play" is checked the  
projector automatically starts to play slides at the first slide of the folder  
you have selected.  
02 : 0001 / 0008  
Current folder number  
A tool bar will appear when you press the MENU button on the remote  
control or the projector cabinet or clicking with the right button of a mouse.  
Number of all slides in  
folder  
Current slide  
number  
Delete  
Prev  
Play  
Jump  
Drive  
Use the SLIDE +/- button to advance to the next folder or return to the  
previous folder.  
Drag  
View  
Setup  
Next  
Stop  
Select  
SLIDE  
The tool bar includes the following buttons:  
Folder  
Drag ............ Drags to move the tool bar.This is available for USB mouse  
operation only.  
Prev ............. Returns to the previous slide or folder. Or this lets you  
play slides back in reverse.  
Next ............. Advances to the next slide or folder. Or this lets you play  
slides back.  
Play ............. Plays back automatically or manually depending on the  
setting on Viewer Options of the menu.This allows you to  
move on to the next slide when "Manual Play" is selected.  
Use the SLIDE +/- button to advance to the next slide or return to the  
previous slide.  
Stop............. This allows you to stop Auto Play while you are playing  
back and to resume playing from the selected slide or folder  
when "Auto Play" is selected.  
Slide(Table) cursor  
(green marks)  
Slide  
Slide  
Slide  
Slide  
Slide  
Slide  
Slide  
Slide  
Jump ........... Displays a list of slides while you are playing back.  
Select .......... Displays a list of folders while you are playing back.  
Drive ............ Switches between PC Card slot 1 and 2.  
Setup........... Displays the Viewer Options dialog box on Page 2 of the  
Setup dialog box.  
Delete.......... Deletes a captured slide(s) or all the captured slides in  
the Capture - specific folder.  
02 : 0004 / 0008  
View ............ Hides the tool bar while you are playing back. Pressing  
the MENU button or clicking with the right button of a  
mouse shows it again.  
NOTE: If no memory card is inserted in the PC CARD slot, there is no signal, and  
a black, blue or logo background is displayed, depending on the setting.  
Playback is stopped when SLIDE +/- button on the remote control or ̇̈ button  
on the cabinet is pressed in Auto Play mode.  
Up to 12 indexes can be displayed on the list of folders. The folder in the right  
bottom is always a folder exclusively for captured images, but is only displayed  
when images have been captured.  
E-31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparations:  
NOTE: You can also use the ̇ and ̈ button on the remote control to select  
folders or slides.  
If you use the ̇ and ̈ button on the remote control for Viewer operation, press  
the PJ button to switch to the Projector mode and the PJ button lights red.  
Insert the PC card into the card slot.  
Insert the PC card so that the end with the insertion direction arrow  
on the top goes in first.  
* Press the eject button to eject the card.  
1. Project the image you wish to store on the projector.  
2. Select the "Capture" from the Tools menu.  
Works as the Select button on the  
projector.  
SELECT  
C
E
N
PJ  
Lit red  
3. A tool bar will appear.  
Auto Play Mode  
If the "Auto Play" option is selected in "Viewer Options" of the menu,  
any given slide will start to play automatically.  
You can also specify Auto Play Interval between 5 and 300 seconds.  
Capture  
Drag  
Freeze  
Exit  
Switching to Slides Directly from Other Input Modes  
Drive  
The tool bar includes the following buttons:  
With this function it is possible to switch directly to a slide when the  
picture of a VCR or computer is being projected.  
Example:When conducting presentations using a combination of slides  
and moving pictures from a VCR, etc., it is possible to switch from a  
Viewer slide to the video picture then back to the Viewer slide simply by  
using the Viewer button.  
Drag ............ Drags to move the tool bar by clicking on the blue part (for  
USB mouse operation only).  
Capture ....... Captures an image and save it as a JPEG file on a PC  
card.  
NOTE: Even if you switch the current Viewer source to another source, the cur-  
rent slide is retained. When you return back to the Viewer, you will get the slide  
that has been retained.  
Freeze ......... Freezes and unfreezes images.  
Drive ............ Switches between PC Card slot 1 and 2.  
Exit .............. Exits the Capture function. Another option to exit the Cap-  
ture function is to press MENU or CANCEL button on the  
remote control or projector cabinet.  
The PC card editing operation cannot be performed from the projector.  
Do so using the Dynamic Image Utility 2.0 software.  
Viewing Digital Images  
NOTE:  
You can compress a captured file (JPEG) using the Capture Options in the Setup  
dialog. See page E-46.  
Digital images can be played with the Viewer if the following conditions  
are met:  
Captured images with higher resolution than the projector's native resolution  
cannot be displayed correctly.  
•
•
If the image can be stored on an MS-DOS format PC card  
If the image can be stored in a format supported by the Viewer. With  
the Viewer, images on the card are searched for in directories and  
images in JPEG or BMP format are recognized as slides.Searchable  
directories are directories within two steps from the root directory,  
and searchable images are images within the first 12 files in the di-  
rectory. Only file and slide switching are possible.  
• File size of the captured image varies depending on the resolution of an input  
signal.  
• An hourglass indicating that an image is being captured appears on the  
projector's display. Do not eject the PC card or turn off the projector's power  
while this icon is displayed. Doing so will damage the PC card data. If the PC  
card data is damaged, use a computer to repair the data.  
• Up to 12 indexes can be displayed on the list of folders. The folder in the right  
bottom is always a folder exclusively for captured images, but is only dis-  
played when images have been captured.  
NOTE: The maximum number of images recognized as slides within one direc-  
tory is 128.  
Storing Images Displayed on the Projector on the PC  
card (Capture)  
The Capture features allows you to capture an image from a source that  
is currently being displayed. The image is saved as JPEG in the PC  
card. When you select Capture from the menu, you will get a tool bar.  
You can capture an image directly using the tool bar when the menu is  
not displayed.  
NOTE:  
* Unless a PC card is inserted into the PC Card slot of the projector, the Capture  
feature is not available.  
* The "Card Error" display means that the free space of the PC card is insufficient  
for saving images. Make more space available on the card by erasing un-  
wanted images with your PC. The number of images that can be captured  
depends on the size of the PC card.  
* Be sure not to turn off the power or remove the PC card while capturing an  
image. Doing so could cause a loss of the data in the PC card or damage to the  
card itself.  
E-32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Deleting Captured Images  
Using the Delete button on the tool bar for Viewer can delete captured  
images.  
Delete  
Prev  
Play  
Jump  
Drive  
Drag  
View  
Setup  
Next  
Stop  
Select  
To delete captured images:  
1. Select Viewer and display a folder list of captured images.  
2. Use button to select the Capture folder [Cap] in the right bottom of  
the screen.  
3. Press the MENU button to display the tool bar.  
4. Use the ̇ or ̈ button to select the Delete icon and press the EN-  
TER button or click with a mouse button.  
Using the PC Card Files Fucntion (PC Card Files)  
The PC Card Files function allows you to display a list of all the files  
stored in the PC card so that you can select a file you want to display.  
You can also sort files by file name or date, or display the file. Although  
a list of all the files in the PC card is displayed, you can view files in idx,  
text, HTML, JPEG and BMP format only. Selecting BMP and JPEG files  
automatically switches to the Viewer source. See also page E-39.  
NOTE: This option is not available for selection unless a PC card is inserted  
properly.  
Selecting "Execute" displays the file you selected.  
When you select a JPEG or BMP file and press the ENTER button on  
the remote or the cabinet, or "Execute" on the above, you will get a  
toolbar. This toolbar is used to return to the PC Card Files screen.  
Drag  
Close  
Return  
Drag ............ Drags to move the tool bar. (for USB mouse operation  
only)  
Return ......... Returns to the PC Card Files screen.  
Close ........... Close the toolbar.  
E-33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING ON-SCREEN MENU  
The default Custom Menu items are:  
Basic Menu Operation  
Source Select (RGB 1/2, Video, S-Video, DVI(DIGITAL), Viewer and  
LAN), Picture, Sound, Image Options (Aspect Ratio), Picture Manage-  
ment, Projector Options (3D Reform, Menu, Setup, Lamp Setting, Screen  
and LAN Mode), Tools (Sleep Timer, Capture, PC Card Files and  
ChalkBoard) and Help (Contents and Information).  
Using the Menus  
NOTE: The on-screen menu may not be displayed correctly while interlaced mo-  
tion video image is projected.  
1. Press the MENU button on the remote control or projector cabinet to  
display the Basic, Advanced or Custom Menu.  
NOTE: Once you have selected OK on the Custom Menu Edit screen, you cannot  
cancel the changes on the Menu screen. However, you can reedit the menu items  
over again as described in the steps above.  
NOTE: When using a USB mouse, click the mouse button to display the menu.  
For other operations, do the same way as you use your PC mouse.  
2. Press the SELECT ̆̄ buttons on the remote control or the projec-  
tor cabinet to highlight the menu for the item you want to adjust or  
set.  
NOTE: If the "Advanced Menu" item has been selected on the Menu mode, you  
get the "Confirmation Change Menu" upon completion of "Custom Menu" editing.  
In this case, selecting "Yes" then "ENTER" will close all the menus and apply the  
changes from the Advanced menu to the Custom Menu. If you select "No" then  
"ENTER" functions, then all menu items will return to the Advanced menu, but  
your changes will still be available within the "Custom Menu" selection. To dis-  
play the previously tailored Custom Menu, select "Custom Menu" from the "Menu  
Mode".  
3. Press the SELECT ̈ button or the ENTER button on the remote  
control or the projector cabinet to select a submenu or item.  
4. Adjust the level or turn the selected item on or off by using SELECT  
̇ or ̈ buttons on the remote control or the projector cabinet.  
The on-screen slide bar will show you the amount of increase or  
decrease.  
An item "To Advanced Menu" will be added to the bottom of the Custom  
Menu.  
5. Changes are stored until you adjust it again.  
Selecting this item and pressing the ENTER button will display the "Ad-  
vanced Menu" features.  
ENTER .......... Stores the setting or adjustments.  
CANCEL ........ Return to the previous screen without storing settings  
or adjustments.  
NOTE: You can close the main and sub menus simultaneously by pressing  
the PJ button on the remote control to cancel the Projector mode.  
6. Repeat steps 2-5 to adjust an additional item, or press the CANCEL  
button on the projector cabinet or the remote control to quit the menu  
display.  
Customizing the Menu  
The Custom menu can be customized to meet your requirements. Se-  
lecting a menu item from the "Custom Menu Edit" list, allows you to  
custom tailor the menu items to your needs.  
1. Select "Custom Menu Edit" to display the "Custom Menu Edit" screen.  
2. Use the SELECT ̆ or ̄ buttons to highlight your selection and press  
the ENTER button to place a check mark next to an option.  
This action enables that feature. Press the ENTER button again to  
clear the check box.  
If you select an item with a solid triangle ̈ and press the ENTER  
button on the remote control or the projector cabinet, you can enable  
all the items within that submenu. Also you can turn on an item within  
the submenu without placing a check mark on the main menu item.  
NOTE: Up to 12 main menu items (within Custom Menu Edit, not including  
submenu items) can be selected.  
3. In order for the changes to take effect, use the SELECT ̇ or ̈ but-  
ton on the remote control or the projector cabinet to highlight "OK",  
then press the ENTER button. To cancel the changes, use the SE-  
LECT ̆ or ̄ buttons to highlight "Cancel" and press the ENTER  
button.  
To return to the factory default, select "Reset" then press the ENTER  
button.  
E-34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu tree  
Advanced Menu  
Source Select  
Picture  
RGB1  
RGB2  
Video  
Sound  
S-Video  
DVI (DIGITAL)  
Viewer  
LAN  
Image Options  
Picture Management  
Projector Options  
Tools  
User1  
User2  
User3  
more  
Entry List  
Help  
Factory Default  
Picture  
Brightness, Contrast, Color,  
Hue, Sharpness  
Volume, Bass, Treble  
Aspect Ratio  
4:3, Letterbox, Wide Screen, Crop / 4:3  
Window, Letterbox, Wide Screen, 4:3 Fill  
Top, Bottom, Left, Right  
Horizontal, Vertical, Clock, Phase  
Auto, Native  
Blanking  
Position/Clock  
Resolution  
Overscan  
0%, 5%, 10%, 25%  
Video Filter  
Noise Reduction  
Signal Type  
Off, Less, More  
Off, Low, Medium, High  
RGB, Component  
Picture Management  
Presentation, sRGB, Graphic, Video,  
Movie, User 1, User 2, User 3, User 4  
E-35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Menu  
Source Select  
Picture  
Cornerstone  
Keystone  
Horizontal, Vertical  
Sound  
Off, User 1, User 2, User 3, User 4 (Auto Adjust Button)  
Image Options  
Picture Management  
Projector Options  
Tools  
3D Reform  
Wall Color Correction  
Menu  
Menu  
Setup  
Page 1  
Help  
Lamp Setting  
Screen  
Language  
English, Deutsch,  
Français, Italiano,  
Español, Svenska  
Factory Default  
Auto Functions  
LAN Mode  
Password  
Security  
Menu Mode  
Basic Menu,  
Custom Menu,  
Advanced Menu  
Custom Menu Edit  
Pointer 1-9  
Setup  
Projector Pointer  
Mouse Pointer  
Page 1  
Pointer 1-9  
Orientation  
Desktop Front, Ceiling Rear,  
Desktop Rear, Ceiling Front  
Blue, Black, Logo  
Menu Display Time Manual, Auto 5sec,  
Auto 15sec,  
Background  
Auto 45sec  
RGBOUT Terminal Last, RGB1, RGB2  
Page 2  
Closed Caption  
Off, Caption1-4, Text1-4  
Source Display  
Message  
On, Off  
On, Off  
Page 2  
Viewer Options  
Show Folder List  
Menu Color Select Color, Monochrome  
Auto Play, Manual Play, Interval  
High Quality, Normal,  
High Compression  
Capture Options  
Mouse Button  
Right Hand, Left Hand  
Sensitivity Fast, Medium, Slow  
Operation Mode Select Auto, Projector  
Page 3 Signal Select  
RGB1 RGB/Component, RGB, Component, Scart  
RGB2 RGB/Component, RGB, Component, Scart  
Video, Auto, PAL-M/PAL-N/NTSC3.58, NTSC3.58,  
S-Video NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM  
Page 4  
Auto Adjust, Auto Start, Power Management,  
Power Off Confirmation, 3D Reform Save,  
High Speed Fan Mode, Built-in Speaker, Idle Mode,  
Clear Filter Usage Meter  
Page 5  
Remote Sensor  
Front, Back, Left, Right  
S-Video Mode Select Off, S2  
Page 6  
Communication Speed  
Default Source Select  
4800, 9600, 19200, 38400  
Last, Auto, Select (RGB1, RGB2,Video,  
S-Video, DVI(DIGITAL), Viewer, LAN)  
Enable, Disable  
Control Panel  
Key Lock  
E-36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Lamp Mode  
Lamp Type  
Normal, Eco  
Standard Lamp,  
Extended Life Lamp  
Advanced Menu  
Source Select  
Picture  
Screen Type 4:3, 16:9 / Position  
3D Reform  
Wall Color Correction  
Menu  
Focus  
On, Off  
Volume  
Wall Color Correction  
3D Reform  
Adjustment  
Sensitivity  
On, Off  
Image Options  
Picture Management  
Projector Options  
Tools  
On, Off  
Setup  
Inside, Outside  
Lower, Medium, Higher  
Lamp Setting  
Screen  
Help  
Auto Functions  
LAN Mode  
Password  
Security  
Factory Default  
LAN Mode  
IP Address  
Automatic  
Manual  
IP Address,  
Subnet Mask,Gateway  
Projector Name  
DNS Configuration  
Domain Name  
Network Type  
Mode  
Infrastructure,  
802.11 Ad Hoc, Ad Hoc  
Easy Connection  
Sleep Timer  
Capture  
PC Card Files  
ChalkBoard  
SSID  
Channel  
TX rate  
1-14  
Automatic, 11M, 5.5M, 2M,  
1M, 1M-2M-Automatic  
Contents  
WEP  
Information  
WEP  
Disable, 64bit, 128bit  
Key1-4  
Key Select  
Key1-4  
Factory Default  
All Data,  
Mail  
Alert Mail  
Current Signal  
Sender's Address  
SMTP Server Name  
Recipient's Address 1  
Recipient's Address 2  
Recipient's Address 3  
Test Mail  
Status  
IP Address  
Subnet Mask  
MAC Address  
Menu  
Logo  
Security  
Enable, Disable, Keyword,  
Use Protect key, Drive, Read,  
Register, Delete  
E-37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Elements  
Highlight  
Help Button  
Close Button  
Title bar  
Tab  
Radio button  
OK Button  
Cancel Button  
Solid triangle  
Check box  
Slide bar  
Drag  
Tool bar  
Menu windows or dialog boxes typically have the following elements:  
Cancel button ..... Press to cancel your setting. You will return to the  
previous menu.  
Title bar .............. Indicates the menu title.  
Close button ....... Click to close the window with saving changes. (USB  
mouse only)  
Highlight ............. Indicates the selected menu or item.  
Solid triangle ...... Indicates further choices are available. A highlighted  
triangle indicates the item is active.  
Help button ......... Indicates that help about that feature is available (USB  
mouse only). Press the Help button on the remote  
control to display help.  
Tab ..................... Indicates a group of features in a dialog box. Select-  
ing on any tab brings its page to the front.  
Toolbar ............... Contains several icons for specific tasks. It is also  
referred to as “launcher”.  
Radio button ....... Use this round button to select an option in a dialog  
box.  
Drag ................... Point the mouse here, and click and drag to move a  
toolbar.  
Check box .......... Place a checkmark in the square box to turn the op-  
tion On.  
Slide bar ............. Indicates settings or the direction of adjustment.  
OK button ........... Press to confirm your setting. You will return to the  
previous menu.  
E-38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Delete  
Entering Alphanumeric Characters by Using the Menu  
Prev  
Play  
Jump  
Drive  
Alphabet or numeric characters are used for your IP address or projec-  
tor name.To enter IP Address or projector name, use the software key-  
board.  
Drag  
For using the software keyboard, see page E-64.  
View  
Setup  
Next  
Stop  
Select  
Drag ............... Drags to move the tool bar. (for USB mouse opera-  
tion only)  
Prev ............... Returns to the previous slide or folder.  
Next ............... Advances to the next slide or folder.  
Play ................ Plays back automatically or manually depending on  
the setting on Viewer Options of the menu. This al-  
lows you to move on to the next slide when "Manual  
Play" is selected.  
Stop ............... Stops Auto Play while you are playing back and to  
resume playing from the selected slide or folder when  
"Auto Play" is selected.  
Jump .............. Displays a list of slides while you are playing back.  
Select ............. Displays a list of folders while you are playing back.  
Drive .............. Switches between PC Card slot 1 and 2.  
Setup ............. Displays the Viewer Options dialog box on Page 2 of  
the Setup dialog box.  
Delete ............ Deletes a captured slide(s) or all the captured slides  
in the selected folder.  
View ............... Hides the tool bar while you are playing back. Click-  
ing with the right button of a mouse shows it again.  
Provides access to controls for your image. Use the  
SELECT button on the projector cabinet or the re-  
mote control to highlight the menu for the item you  
want to adjust.  
Menu Descriptions & Functions  
Source Select  
Selecting a Source  
Enables you to select a video source such as a VCR, DVD player, laser  
disc player, computer or document camera depending on what is con-  
nected to your inputs. Press the SELECT ̆̄ button on the projector  
cabinet or on your remote control to highlight the menu for the source  
you want to project.  
LAN  
Selects a signal from a LAN card plugged into the projector's card  
slot.  
Entry List  
RGB  
Selects the computer connected to your RGB1, RGB2 or component  
signal.  
NOTE: An optional component cable (Component V or ADP-CV1 cable) is  
needed for a component signal.  
Video  
Selects what is connected to yourVideo input-VCR, laser disc player,  
DVD player or document camera.  
S-Video  
Selects what is connected to your S-Video input-VCR, DVD player,  
or laser disc player.  
Displays the list of the entry signals. Use the SELECT ̆̄ buttons on  
your remote control or the projector cabinet to select the signal and  
press the ENTER button on the remote control or the projector cabi-  
net to display the Entry Edit Command screen.  
NOTE: A frame may freeze for a brief period of time when a video is played  
back in fast-forward or fast-rewind with a Video or S-Video source.  
DVI (DIGITAL)  
Selects the computer connected to the DVI input connector.  
Using the Entry List  
Making any ajustments to the current picture will automatically regis-  
ter its adjustments to the Entry List. The registered signal can be  
loaded any time from the Entry List.  
Viewer  
This feature enables you to make presentations using a PC card that  
contains captured images and slides created with the exclusive Dy-  
namic Image Utility 2.0 contained in the CD-ROM. See the supplied  
Software Utility Installation Guide for installing the Dynamic Image  
Utility 2.0.The starting screen for theViewer varies depending on the  
settings of the Setup's Page 2. See Setup on page E-46.  
NOTE: Up to 100 presets can be registered.  
NOTE: Even if you switch the current Viewer source to another source, the  
current slide is retained. When you return back to the Viewer, you will get the  
slide that has been retained. A launcher will appear when you press the MENU  
button.  
A press of the MENU button displays the toolbar;a press of the MENU  
button again displays the Menu and hereafter each press of the MENU  
button switches displaying between the Menu and the toolbar.  
The launcher is a tool bar including the following buttons:  
E-39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Entry Edit Command  
Picture (not available for Viewer and LAN)  
Adjusting Brightness, Contrast, Color, Hue, and Sharpness  
Brightness ...... Adjusts the brightness level or the back raster inten-  
sity.  
Contrast ......... Adjusts the intensity of the image according to the  
incoming signal.  
Color .............. Increases or decreases the color saturation level (not  
valid for RGB).  
You can edit signals on the Entry List.  
Load ............... Enables you to select a signal from the list.  
Hue ................ Varies the color level from +/- green to +/-blue. The  
red level is used as reference.This adjustment is only  
valid for Video and Component inputs (not valid for  
RGB).  
Store .............. Enables you to store the currently projected signal.  
Cut ................. Enables you to remove a selected signal from the list  
and place it on the "clipboard" in the projector.  
Copy .............. Enables you to copy a selected signal from the list  
and place it on the "clipboard" in the projector.  
Sharpness ..... Controls the detail of the image for Video (Not valid  
for RGB).  
Paste .............. Enables you to paste the signal placed on the "clip-  
board" to any other line of the list. To do this, select  
"Paste" and then select the line number you want to  
paste to. Last press ENTER.  
Sound  
Controlling Volume, Bass and Treble.  
Adjusts the sound, bass and treble level of the projector speaker and  
AUDIO OUT (RCA).  
Edit ................ Enables you to change source names or add source  
names to "More" in the Sorce Select.  
Source Name .. Enter a signal name.Up to 18 alpha-  
numeric characters can be used.  
Image Options  
Selecting Aspect Ratio (not available for Viewer and LAN)  
Aspect Ratio allows you to select the best Aspect mode to display your  
source image.  
When screen size 4:3 is selected for the source, the following selections  
will display:  
Input Terminal .. Change the input terminal. RGB1  
and RGB2 are available for RGB sig-  
nal;Video and S-Video are available  
for composite signal.  
Source List ...... Set signal selection method.  
Lock ................ Set so that the selected signal can-  
not be deleted when "All Delete" is  
executed.  
4:3.................. Standard 4:3 aspect  
Letter Box ...... Reduced to display the true aspect with black bor-  
ders on top and bottom  
Skip ................. Set so that the selected signal will  
be skipped during auto search.  
Wide Screen .. Left & Right stretched with black borders on top and  
bottom  
When complete, select OK and press ENTER.To exit  
without storing setting, select Cancel.Select "Source  
Name" and press ENTER to display the Source Name  
Edit window. You can change source name on this  
window. Press [̄] to display the software keyboard,  
which you can enter alphanumeric characters. See  
page E-64 for the key function of the software key-  
board.  
Crop ............... Left & Right stretched.  
Left & Right sides cut. Available for 4:3 only.  
When screen size 16:9 is selected for the source, the following selec-  
tions will display:  
4:3 Window .... Reduced to display the true aspect with black bor-  
ders on right and left  
All Delete ....... This feature enables you to delete all the registered  
signals in the Entry List.  
Letter Box ...... Standard 16:9 aspect  
Wide Screen .. Left and right stretched to display the true aspect  
4:3 Fill ............ Stretched to display in 16:9 aspect ratio  
The following buttons are not available for the currently projecting  
signals:  
1) The Cut and Paste buttons on the Entry Edit Command screen  
2) The Input Terminal button on the Entry Edit screen  
NOTE: You can adjust image positions vertically for source with black borders.  
See page E-49 for setting image positions.  
Copyright  
Please note that using this projector for the purpose of commercial gain or the  
attraction of public attention in a venue such as a coffee shop or hotel and em-  
ploying compression or expansion of the screen image with a "Aspect Ratio" or  
"Screen" setting may raise concern about the infringement of copyrights which  
are protected by copyright law.  
NOTE: During 3D Reform adjustment, "Aspect Ratio" may not be available.  
Should this happen, first reset the 3D Reform data and then do setting again.  
Second repeat the 3D Reform adjustment.  
Changing the aspect ratio can limit 3D Reform in its adjustable range.  
Input  
Signal  
Screen  
Type  
Letterbox  
Squeeze  
4:3  
4:3  
Crop  
Wide Screen  
4:3 Screen  
Letterbox  
Letterbox  
16:9 Screen  
Wide Screen  
4:3 Fill  
4:3 Window  
E-40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Masking Unwanted Area (Blanking)  
This feature allows you to mask any unwanted area of the screen  
image.  
Selecting Noise Reduction Level (not available for RGB, Viewer and LAN)  
Select one of the three levels for reducing video noise: Low, Medium  
or High.  
Adjust the Top, Bottom, Left or Right blanking with the SELECT ̇ or  
̈ button.  
NOTE: The lower the Noise Reduction level, the better the image quality by  
way of higher video bandwidth.  
Adjusting Position and Clock  
This allows you to manually adjust the image horizontally and verti-  
Signal Type  
cally, and adjust Clock and Phase.  
Select either the RGB signal type or the Component signal type.  
Horizontal/Vertical Position:  
RGB ............... RGB signal  
Adjusts the image location horizontally and vertically using the SE-  
LECT ̇ and ̈ buttons.This adjustment is made automatically when  
the Auto Adjust is turned on. See "Auto Adjust" on page E-47 for  
turning on or off the Auto Adjust feature.  
Component .... Component signals such as Y/Cb/Cr, Y/Pb/Pr  
NOTE: This feature is available on RGB 1 and 2 only. If you do not get a better  
picture even when you set "Signal Select" to "Component" in Setup, set this to  
"Component".  
Clock .............. Use this item to fine tune the computer image or to  
remove any vertical banding that might appear. This  
function adjusts the clock frequencies that eliminate  
the horizontal banding in the image.  
Picture Management  
Press the SELECT ̇ and ̈ buttons until the band-  
ing disappears. This adjustment may be necessary  
when you connect your computer for the first time.  
This adjustment is made automatically when the Auto  
Adjust is turned on.  
Phase ............ Use this item to adjust the clock phase or to reduce  
video noise, dot interference or cross talk. (This is  
evident when part of your image appears to be shim-  
mering.) Use the SELECT ̇ and ̈ buttons to adjust  
the image.  
Use "Phase" only after the "Clock" is complete. This  
adjustment is made automatically when the Auto Ad-  
just is turned on.  
This option allows you to adjust neutral tint for yellow, cyan or magenta.  
There are 5 factory presets optimized for various types of images, or  
you can set 4 user adjustable settings.  
Selecting Resolution  
This allows you to activate or deactivate the Advanced AccuBlend  
feature.  
Presentation .. Recommended for making a presentation using a  
PowerPoint file  
Auto ............... Turns on the Advanced AccuBlend feature. The pro-  
jector automatically reduces or enlarges the current  
image to fit the full screen.  
sRGB ............. Standard color values  
Native............. Turns off the Advanced AccuBlend feature. The pro-  
jector displays the current image in its true resolu-  
tion.  
Graphic .......... Recommended for graphics  
Video ............. Recommended for regular picture such as TV pro-  
gram  
See "Auto Adjust" on page E-47 for turning on or off  
the Auto Adjust feature.  
Movie ............. Recommended for movie  
User 1-4 ......... User adjustable  
NOTE:  
* When "Resolution" is set to "Native", "3D Reform", "Aspect Ratio", "Screen"  
and "Overscan" are not available.  
* While you are displaying an image with higher resolution than the projector's  
native resolution, “Resolution” is not available.  
NOTE: When "sRGB", "Graphic", "Video" or "Movie" is selected, the brightness  
decreases slightly when compared to "Presentation". This is not a malfunction.  
User Adjust (when using User 1 to 4)  
Selecting Overscan Percentage  
Select overscan percentage (0%, 5%, 10% and 25%) for signal.  
NOTE: When "Resolution" is set to "Native", this feature is not available, and  
the stored settings and adjustments are invalid.  
NOTE: When "4:3 Fill" or "Crop" is selected in "Aspect Ratio", this feature is not  
available.  
Selecting Video Filter Level (not available for Video, Viewer and LAN)  
This function reduces video noise.  
Off .................. The filter is removed.  
Less ............... The low-pass filter is applied partially.  
More .............. The low-pass filter is applied fully.  
When selecting one of four user adjustable presettings (User 1 through  
4), the submenu will be displayed.  
You can customize each gamma or color. To do so, first select [Set-  
ting] and press the ENTER button, and then proceed the following  
steps.  
E-41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting Gamma Correction Mode  
Use the ̇ or ̈ buttons to choose one mode from three options.  
Each mode is recommended for :  
Projector Options  
Using 3D Reform  
This feature corrects trapezoidal distortion so that the projected im-  
age is rectangular.  
Dynamic ......... For true color reproduction of natural tones  
Natural ........... Normal settings  
Two options are available for correcting procedures.  
You can save adjustment settings by using the 3D Reform Save op-  
tion on Setup (See page E-47).  
Black Detail .... For dark portions of a picture  
Cornerstone  
Selecting Color Correction  
See page E-20.  
Adjusts red, green, blue, yellow, magenta, cyan and color gain each  
independently to correct the tint on whole screen.  
Adjusting Color Temperature and White Balance  
This feature adjusts the color temperature using the slide bar.  
Checking "Color Temperature" enables the color temperature slide  
bar and disables the “White Balance” button.  
Clear “Color Temperature” and press the White Balance button to  
access the Contrast/Brightness adjustment for each R, G, and B.  
NOTE: "Color Temperature" and "White Balance" are a trade-off.  
The White Balance is not available for Viewer and LAN.  
Keystone  
Selecting Base Setting  
This feature allows you to use color correction or gamma values as  
reference data to optimize for various types of images.You can select  
one of the following five settings.  
• Presentation  
• Video  
• sRGB  
• Movie  
• Graphic  
1. Press the SELECT ̇̈ button to adjust the horizontal keystone.  
2. Press the SELECT ̆̄ button to select "Vertical".  
3. Press the SELECT ̇̈ button to adjust the vertical keystone.  
4. After completing, press the ENTER button.This will return to the menu  
screen.  
*
When "Resolution" is set to "Native", "Cornerstone" and "Keystone"  
are not available.  
Keystone Correction at Zoomed Lens Position  
You can zoom in or out, while keeping an image that was corrected  
using Keystone, without again having to make those adjustments.  
Improvements in 3D Reform performance allows the projector's adjust-  
ment range (horizontal and vertical combinations) to be wider by ap-  
proximately 25% in the maximum telephoto position when compared to  
initial units shipped.  
NOTE: There are some cases when adjusting the zoom position from Tele to  
Wide (after performing Keystone correction in Tele) can result in a message  
“Range Over ! 3D Reform data has been cleared.”. In this case correction values  
for Keystone will return to the factory default setting.  
E-42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Adapting Color Correction [Wall Color Correction]  
2. Highlight "Automatic".  
3. Use the SELECT ̄ button to highlight "Execute" and then press the  
ENTER button.  
The Auto Wall Color Correction will be executed.  
This function allows for correcting the color of the projected images on  
textured walls using the image sensor on the projector. There are two  
ways for color correction: Automatic and Manual. Automatic correction  
affects all colors; Manual correction allows you to correct each color R,  
G, B, and W respectively.  
NOTE: When Auto Wall Color Correction is enabled in the Auto Functions menu,  
Wall Color Correction can be executed by pressing and holding the AUTO AD-  
JUST or AUTO ADJ button for a minimum of 2 seconds.  
Manual Wall Color Correction  
Off .................. Disables this function  
Preparation: Before correcting manually, prepare a non-glossy, non-  
transparent, clean white paper (300 mm 
ן
 420 mm). Hereafter re-  
ferred to as "the white paper for Wall Color Correction."  
User 1 to 4 ..... Executes correction. Four settings can be saved.  
User 4 (AutoAdjustButton) stores settings when the  
Auto Function is executed by pressing and holding  
the AUTO ADJUST button or AUTO ADJ. button for a  
minimum of 2 seconds.  
1. Choose a selection from User 1 – 4. Highlight "Setting" and press the  
ENTER button.  
The correction mode select screen is displayed.  
To read the pre-adjustment settings. Choose a selection User 1 – 4,  
highlight "OK" and press the ENTER button.  
Info box .......... Displays "Automatic" or "Manual". This is the option  
you have set for User 1 – 4 setting.  
*
NOTE: Correction may not be possible depending on ambient room lighting,  
walls with a texture that is glossy or with certain patterns, or walls that are the  
2. Highlight "Manual".  
color black or primary deep colors.  
If you try to correct beyond the limit, an error message "Out of correction range!"  
will be displayed. This message means that you will not be able to correct the  
color due to the above reasons.  
Also, When the image sensor fails to pick up the image of a wall color during  
Auto Wall Color Correction, an error message "Failed to execute Auto Wall Color  
Correction" will be displayed. This message means that there may be an obstacle  
between the wall and the image sensor on the projector, or the image sensor  
may not work because of too much ambient light. Make corrections to what  
seems to be the problem and try again.  
3. Use the SELECT ̄ button to highlight "Execute" and then press the  
ENTER button.  
The Manual Wall Color Correction (Red) screen will be displayed.  
Automatic Wall Color Correction  
1. Choose a selection from User 1 – 4. Highlight "Setting" and press the  
ENTER button.  
The correction mode select screen will be displayed.  
*
To read the pre-adjustment settings. Choose a selection from User 1  
– 4, highlight "OK" and press the ENTER button.  
Working area  
E-43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Place the white paper forWall Color Correction over the working area  
in the Manual Wall Color Correction (Red) screen.  
Paste the white paper for Wall Color Correction loosely or get some-  
one to hold it.  
6. Use the SELECT ̆̄̇̈ button to move the yellow box to select a  
color density.  
Moving the yellow box changes the color density of the selected por-  
tion in the palette.  
Move the yellow box so that a color on the white paper for Wall Color  
Correction becomes close to a color of the projected image on the  
wall.  
Position of the white paper for  
Wall Color Correction  
NOTE: The size of the above Manual Wall Color Correction screen changes de-  
pending on the screen size.  
Actual color of the projected  
image on the wall  
5. Use the SELECT ̇ or ̈ button to move the blue frame to the work-  
ing area and then press the ENTER button.  
A yellow box will appear in the palette.  
Color of the projected image on the white  
paper for Wall Color Correction  
*
*
To move the Manual Wall Color Correction (Red) screen, high-  
light "Move" and then press the ENTER button.  
7. When you complete the correction, press the ENTER button.  
The "Next" will be highlighted.  
The "Slide Bar" button adjusts Hue, Saturation and Brightness.  
8. Press the ENTER button.  
The Manual Wall Color Correction (Green) screen will be displayed.  
Palette  
Yellow box  
9. Repeat steps 4 to 8. Adjust Red, Green, Blue and White respectively.  
When you complete correcting White, the Exit Adjustment screen is  
displayed.  
10. Highlight the Correction Level bar and then use the SELECT ̇ or ̈  
button to finely adjust.  
Blue frame  
11. Highlight "OK" and press the ENTER button.  
E-44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu  
Allows you to set preferences for the on-screen menu. Press "OK" to  
save your changes for all the features of Page 1 and Page 2.  
Selecting Menu Display Time:  
This option allows you to select how long the projector waits after the  
last touch of a button to turn off the menu.  
The preset choices are "Manual", "Auto 5 sec", "Auto 15 sec", and  
"Auto 45 sec". The "Auto 45 sec" is the factory preset.  
[Page1]  
Manual ........... The menu can be turned off manually.  
Auto 5 sec ...... The menu will automatically be turned off in 5 sec-  
onds if no buttons are pressed within 5 seconds.  
Auto 15 sec .... The menu will automatically be turned off in 15 sec-  
onds if no buttons are pressed within 15 seconds.  
Auto 45 sec .... The menu will automatically be turned off in 45 sec-  
onds if no buttons are pressed within 45 seconds.  
[Page 2]  
Selecting Menu Language [Language]:  
You can choose one of seven languages for on-screen instructions.  
The options are:English, German, French, Italian, Spanish, Swedish  
and Japanese.  
Selecting Menu Mode [Menu Mode]:  
This feature allows you to select 3 menu modes: Advanced Menu,  
Custom Menu and Basic Menu.  
Advanced Menu ............ This is the menu that contains all the avail-  
able menus and commands.  
Turning On / Off Source Display [Source Display]:  
This option turns on or off input name display such as RGB1/2,Video,  
and No Input to be displayed in the top right corner of the screen.  
Basic Menu ................... This is the basic menu that contains mini-  
mum essentials of menus and commands.  
Turning On / Off Message [Message]:  
This option turns on and off messages for lamp life warning, 3-minute  
before power off time, “Please clean filter”and “Please wait a moment”.  
Custom Menu ............... This is the menu that you can customize us-  
ing the Custom Menu Edit to fit your needs.  
Customizing the Menu:  
See page E-34 for instructions about how to customize the Menu.  
Selecting Menu Color [Menu Color Select]:  
You can choose between two color modes for menu color: color and  
monochrome.  
Selecting Projecting Pointer Icon [Projector Pointer]:  
This enables you to select from nine different Pointer icons for the  
"Pointer" button on your remote control.  
After moving your Pointer icon to the area you want on the screen,  
press the Magnify button on the remote control to enlarge the se-  
lected area on the screen. See page E-27 for more details.  
NOTE: There may be cases where the Pointer function is not available (ex. a  
non-interlace signal at 15kHz such as video game.)  
Selecting a Mouse Pointer Icon [Mouse Pointer]:  
This option enables you to select one of nine different mouse point-  
ers when using a USB mouse.  
E-45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Enables you to set operating options.  
[Page 2]  
Press "OK" to save your changes for all the features of Page1, Page2,  
Page3, Page 4, Page 5 and Page 6.  
[Page 1]  
Setting Viewer Options [Viewer Options]  
Show Folder List:  
If this option is checked, when the Viewer source is selected on the  
projector, the folder lists will be displayed and allows you to select the  
presentation from a PC card.  
Selecting Projector Orientation [Orientation]:  
This reorients your image for your type of projection.The options are:  
desktop front projection, ceiling rear projection, desktop rear projec-  
tion, and ceiling front projection.  
Auto Play:  
If this option is checked, when the Viewer source is selected on the  
projector any given slide will start to play automatically.  
Selecting a Color or Logo for Background [Background]:  
Auto Play Interval:  
You can specify interval time between 5 and 300 seconds.  
Use this feature to display a blue/ black screen or logo when no sig-  
nal is available.The default background is “Blue”.You can change the  
logo screen using the PC Card Files feature. See page E-29.  
NOTE: The Auto Play Interval time set on “Slide Show Settings” of the Dy-  
namic Image Utility 2.0 overrides the one set here.  
Setting RGB 1 or 2 for RGB OUT [RGBOUT Terminal]:  
This option allows you to determine which RGB source is output from  
the RGBOUT connector during Idle mode.  
Manual Play:  
Views a slide manually when the Viewer source is selected.  
Last ................ The signal from the last RGB input will be output to  
the RGBOUT connector.  
Selecting Capture Options [Capture Option]: (available for JPEG only)  
These options are used for the Capture function that you can select  
from Tools. You have three options for JPEG compression quality:  
High quality, Normal and High Compression.  
RGB 1 ............ The signal from RGB1 IN will be output to the  
RGBOUT connector.  
RGB 2 ............ The signal from RGB2 IN will be output to the  
RGBOUT connector.  
High Quality .................. Gives quality of JPEG a priority.  
Normal .......................... Gives normal JPEG quality.  
High Compression ........ Gives compression a priority.  
NOTE: The AUDIO OUT mini jack will not output sound during the Idle mode.  
Setting Closed Caption:  
This option sets several closed caption modes that allows text to be  
superimposed on the projected image.  
Setting Mouse Button and Sensitivity [Mouse]:  
This option lets you to change your USB mouse settings.The mouse  
settings feature is available for USB mouse only. Choose the settings  
you want:  
CAPTION 1-4 Text is superimposed.  
TEXT 1-4 ....... Text is displayed in full screen.  
OFF ............... This exits the closed caption mode.  
Mouse Button ............... "Right Hand" or "Left Hand"  
Mouse Sensitivity .......... "Fast", "Medium" or "Slow"  
Selecting Operation Mode [Operation Mode Select]  
Set the operation mode of the USB mouse connected to the USB  
port (MOUSE/HUB) on the projector  
Auto ............... Depending on connection of the USB port (PC) on  
the projector and a USB port (type A) on your PC,  
the USB mouse is operated in the following way:  
*
When connecting the projector to your PC  
The USB mouse connected to the projector can  
be used as a PC mouse.  
*
When not connecting the projector to your PC  
The USB mouse connected to the projector can  
perform menu operation of the projector.  
Projector ........ The USB mouse connected to the projector can per-  
form menu operation of the projector.  
E-46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[Page 3]  
Enabling Auto Start [Auto Start]:  
Tur ns the projector on automatically when the power cable is inserted  
into an active power outlet and the main power switch is turned on.  
This eliminates the need to always use the "Power" button on the  
remote control or projector cabinet.  
Enabling Power Management [Power Management]:  
When this option is on and there is no input for five minutes or more,  
the projector will automatically turn itself off.  
Enabling Power Off Confirmation [Power Off Confirmation]:  
This option determines whether a confirmation dialog for turning off  
the projector will appear or not.  
NOTE: When the confirmation message is displayed, you must be in the Pro-  
jector mode to operate your projector using the remote control. If not, press  
the PJ button on the remote control to change your projector to the Projector  
mode. The button lights to indicate that you are in the Projector mode.  
Enabling Horizontal and Vertical Keystone Correction Save  
[3D Reform Save]:  
This option enables you to save your current 3D Reform settings.  
Saving your change once affects all sources.The changes are saved  
when you turn off the projector.  
Selecting Signal Format [Signal Select]  
RGB1/2:  
Allows you to choose "RGB" for an RGB source such as a computer,  
or "Component" for a component video source such as a DVD player.  
Normally select "RGB/Component" and the projector automatically  
detects an either incoming signal. However there may be some com-  
ponent signals that the projector is unable to detect. If this is the  
case, select "Component". Select "Scart" in RGB 1 or 2 for the Euro-  
pean Scart.  
Enabling High Speed Fan Mode [High Speed Fan Mode]:  
This option allows you to select two modes for fan speed:high-speed  
mode and normal speed mode.  
When you wish to cool down the temperature inside the projector  
quickly, check this box.  
NOTE: Enable High Speed Fan mode if you continue to use the projector for  
consecutive days.  
VIDEO and S-VIDEO:  
This feature enables you to select composite video standards manu-  
ally. Normally select "Auto". Select the video standard from the pull-  
down menu. This must be done for Video and S-Video separately.  
Selecting Built-in Speakers [Built-in Speaker]:  
This option allows you to mute the built-in speakers.  
[Page 4]  
Enabling Idle Mode [Idle Mode]:  
The projector has two standby modes: Standby and Idle.  
Standby is the mode that allows you to put the projector in the standby  
condition which consumes less power than the idle mode. The pro-  
jector is preset for Idle mode at the factory.  
When this check box is turned on, you allow the RGB OUT connector  
to output RGB signal during Idle mode.  
NOTE:  
* The RGB OUT connector will not output signal during the Standby mode.  
* Via the USB interface the projector can be turned on from your PC using  
Dynamic Image Utility 2.0 during the Standby or Idle mode. On the LAN  
connection the projector can be controlled or monitored from your PC us-  
ing Dynamic Image Utility 2.0 only in the Idle mode.  
* The HTTP server functions are not available during Standby mode.  
Resetting the Filter Usage Hours [Clear Filter Usage Meter]:  
Resets the filter usage back to zero. Pressing this button appears a  
confirmation dialog box. To reset the filter usage hours, press "OK".  
Enabling Auto Adjust [Auto Adjust]:  
When "Auto Adjust" is set to "On", the projector automatically deter-  
mines the best resolution for the current RGB input signal to project  
an image using NEC's Advanced AccuBlend Intelligent Pixel Blend-  
ing Technology.  
The image can be automatically adjusted for position and stability;  
"Horizontal Position", "Vertical Position", "Clock", "Phase", and "Reso-  
lution".  
On .................. Automatically adjusts image "Horizontal Position",  
"Vertical Position", "Clock", "Phase" and "Resolution".  
Off .................. User can adjust the image display functions ("Hori-  
zontal Position", "Vertical Position", "Clock", "Phase"  
and "Resolution") manually.  
E-47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[Page 5]  
[Page 6]  
Remote Sensor:  
Selecting Communication Speed [Communication Speed]:  
This feature sets the baud rate of the PC Control port (D-Sub 9 Pin).  
It supports data rates from 4800 to 38400 bps.  
This option determines which remote sensors on the projector are  
enabled in wireless mode.  
The options are: front, rear, right, or left. All checked boxes indicate  
that they can accept the infrared signal from the supplied remote  
control.  
The default is 38400 bps. Select the appropriate baud rate for your  
equipment to be connected (depending on the equipment, a lower  
baud rate may be recommended for long cable runs).  
S-Video Mode Select:  
Selecting Default Source [Default Source Select]:  
You can set the projector to default to any one of its inputs each time  
the projector is turned on.  
This feature is used to select the S-Video signal detection mode.  
This allows identifying of the S-Video signals with different aspect  
ratio (16:9 and 4:3).  
Last ................ Sets the projector to default to the previous or last  
active input each time the projector is turned on.  
Off .................. Does not identify any S-video signal.  
S2 .................. Identifies the 16:9 or 4:3 signal.  
Auto ............... Searches for an active source in order of RGB1 →  
RGB2 →Video → S-Video → DVI(DIGITAL) →Viewer  
→ RGB1 and displays the first found source.  
Select ............. Displays the selected source input every time the pro-  
jector is started up.Select an input from the pull-down  
menu.  
Disabling the Cabinet Buttons [Control Panel Key Lock]:  
This option turns on or off the Control Panel Key Lock function.  
NOTE:  
* This Control Panel Key Lock does not affect the remote control and the PC  
Control functions.  
* When the cabinet buttons are disabled, pressing and holding the CANCEL  
button for about 10 seconds will change the setting to enabled.  
Selecting Lamp Mode and Lamp Type [Lamp Setting]  
Lamp Mode:  
This feature enables you to select two brightness modes of the lamp:  
Normal and Eco modes. The lamp life can be extended by using the  
Eco mode.  
Normal Mode . This is the default setting (100% Brightness).  
Eco Mode ...... Select this mode to increase the lamp life (80% Bright-  
ness).  
Lamp Type:  
The lamp type you use is displayed here.  
MT70LP ......... Standard life lamp (MT1075)  
MT60LP ......... Standard life lamp (MT1065)  
MT60LPS ....... Optional extended life lamp. When the optional ex-  
tended life lamp is used, the Lamp Mode is available.  
E-48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting Aspect Ratio and Position for Screen [Screen]  
NOTE:  
1. If neither Focus or Wall Color Correction are enabled in the Auto Functions  
menu when you press and hold the AUTO ADJUST or AUTO ADJ button  
for a minimum of 2 seconds, the Auto Adjust function (Position/Clock/  
Phase) will be performed instead of Auto Focus and Auto Wall Color Cor-  
rection.  
2. Due to specifications of the image sensor on the projector, Auto Functions  
are effective to image sizes between 40" and 150"(diagonal). Also in some  
cases Auto Functions may not work correctly depending on projection  
conditions such as textured material of the screen or ambient light.  
Screen Type:  
Select either 4:3 Screen or 16:9 Screen for the screen to be used.  
See also "Aspect Ratio" on page E-40.  
NOTE: When "Resolution" is set to "Native", this selection is inactive.  
Position:  
This feature adjusts the vertical position of the image when viewing  
video with an aspect ratio selected.  
When some aspect ratios are selected in Image Options, the image  
is displayed with black borders on the top and bottom.  
You can adjust the vertical position between top and bottom.  
NOTE: This option is not available when "4:3" is selected in Screen Type and  
"Letterbox" is selected in Aspect Ratio.  
NOTE: During 3D Reform adjustment, "Screen Type" and "Screen Position"  
may not be available. To make available, first reset the 3D Reform data and  
then do settings again. Secondly repeat the 3D Reform adjustment. Changing  
"Screen Type" and "Screen Position" can limit 3D Reform in its adjustable  
range.  
Selecting Auto Functions  
Focus:  
When Auto Focus is enabled in the Auto Functions menu, Auto Fo-  
cus can be executed by pressing and holding the AUTO ADJUST or  
AUTO ADJ button for a minimum of 2 seconds.  
Wall Color Correction:  
When Wall Color Correction is enabled in the Auto Functions menu,  
Wall Color Correction can be executed by pressing and holding the  
AUTO ADJUST or AUTO ADJ button for a minimum of 2 seconds.  
Correction settings will be saved on "User 4 (AutoAdjustButton)".  
3D Reform:  
Auto 3D Reform automatically corrects distortion by sensing the out-  
line or outer frame of your screen with the projector’s built-in image  
sensor to project an image within the screen.  
See page E-26.  
E-49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Domain Name Type in domain name of the network connected to  
the projector. Up to 60 alphanumeric characters can  
be used.  
Setting LAN Mode  
This feature allows you to set various setting items when the projector is  
used on your network.  
Consult with your network administrator about these settings.  
NetworkType (required for wireless only)  
NOTE:  
•
•
A LAN card is required for LAN connection; NEC's optional wireless LAN card  
is available. For more information on inserting or ejecting a LAN card, see  
page E-30.  
Either PC Card Slots 1 or 2 can accept LAN card. If two LAN cards are in-  
serted into both PC card slots, the first inserted one is effective.  
CAUTION:Make sure that the LAN card is removed during Standby  
mode (NOT Idle mode) or with the main power off.  
Failure to do so may cause damage to the data on your PC card.  
IP Address  
Mode:  
Select communication method when using wireless LAN.  
Infrastructure ................ Select this option when communicating with  
one or more equipment connected to the  
wireless or wired LAN network via an ac-  
cess point.  
802.11 Ad Hoc .............. Select this option when using the wireless  
LAN to communicate with a computer in a  
one-to-one correspondence. This is a  
method that meets the IEEE802.11 wireless  
standard.  
An IP address can be automatically assigned to this projector by your  
DHCP server. If your network does not automatically assign IP address,  
ask your network administrator for an address, and then register it manu-  
ally.  
Ad Hoc .......................... Select this option when using the wireless  
LAN to communicate with a computer in a  
one-to-one correspondence.  
Easy Connection .......... This allows you to easily set up wireless LAN  
connection. See the supplied Software Util-  
Automatic ....... Automatically assigns an IP address to the projector  
from a DHCP server.  
ity Installation Guide for more information.  
Manual ........... Provides a space for you to register the IP address or  
subnet mask number obtained from your network ad-  
ministrator.  
SSID (Network name):  
Enter an identifier (SSID) for wireless LAN. Communication can be  
done only with equipment whose SSID matches SSID for your wire-  
less LAN. Up to 16 alphanumeric characters can be used (Case-  
sensitive).  
IP Address ..... Set your IP address. Press to display the software  
keyboard and type in 12 numeric characters.  
Subnet Mask .. Set your subnet mask number. Press  
to display  
the software keyboard and type in 12 numeric char-  
acters.  
NOTE: To disable SSID, select a space (null) or "ANY"(All caps).  
Channel:  
Projector Name Specify a unique projector name. Press  
to display  
Set this option when selecting [802.11 Ad Hoc] or [Ad Hoc] in [Mode].  
Select a channel number from the pull-down list. The channel must  
match for all wireless devices communicating on your wireless LAN.  
the software keyboard and type in.Up to 16 alphanu-  
meric characters can be used.  
Gateway ......... Set the default gateway of the network connected to  
the projector. Press  
board and type in 12 numeric characters.  
to display the software key-  
NOTE: Channels in the pull-down list are different depending on which coun-  
try you live in.  
Checking this box will make the set default route valid.  
When data is sent from the LAN card, the transfer  
location will be searched according to the previously  
set routing information; however, when the transfer  
location has not been found as a result of the search,  
the data will be sent to the device that holds the IP  
address set here.The IP address that is set here must  
be one that can be identified by a search of the rout-  
ing information.  
TX rate:  
Select a wireless transmission speed.Normally leave it as Automatic.  
Try another transmission speed when the connection fails.  
DNS Configuration  
....................... Type in the IP address of DNS server on the network  
connected to the projector. 12 numeric characters are  
used.  
E-50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WEP (for Wireless only)  
Mail  
Select this option whether using the WEP (Wired Equivalent Privacy)  
key for encryption or not. To use encryption, specify WEP key.  
NOTE: To the Mail Alert feature on wireless LAN connection, select "Infrastruc-  
ture" for "Mode" in "Network Type." "Test Mail" is available only when there is a  
LAN card in the PC card slot of the projector.  
Disable ........... Will not turn on the encryption feature.Your commu-  
nications may be monitored by someone.  
Alert Mail:  
Checking this box enables Alert Mail feature.  
This option notifies your computer of an error message via e-mail  
when using wireless or wired LAN.The error message will be notified  
when the projector lamp has reached the end of its usable life or an  
error occurs in the projector.  
64bit ............... Uses 64-bit datalength for secure transmission.  
128bit ............. Uses 128-bit datalength for secure transmission.This  
option will increase privacy and security when com-  
pared to use of 64bit datalength encryption.  
Sample of a message sent from the projector:  
The lamp is at the end of its usable life. Please replace the lamp.  
NOTE: The WEP settings must be the same as communication devices such as  
PC or access point in your wireless network. When you use WEP, your image  
transmission speed will slow down.  
Projector Name: X X X X  
Lamp Hour Meter: xxxx [H]  
Projector Usage: xxxxxx [H]  
Key Select:  
Selects one key from the four keys below when selecting [64bit] or  
[128bit] in [WEP].  
Sender's Address:  
Key1-4:  
Specify the senders address. Use the Software keyboard. Up to 60  
alphanumeric and symbols characters can be used.See "Using Soft-  
ware Keyboard" in Appendix for more details.  
Enter encryption key when selecting [64bit] or [128bit] in [WEP].  
The key can also be set in hexadecimal digit.  
*
Enter 0X(numeral and alphabet respectively) right in front of your  
key code.  
SMTP Server Name:  
Type in the SMTP server name to be connected to the projector. Up  
to 60 alphanumeric characters can be used.  
*
*
Hexadecimal uses 0 to 9 and A to F.  
Up to 5 characters can be set in 64 bit and up to 13 characters in  
128 bit.  
Recipient's Address 1 to 3:  
Type in your recipient's address. Up to 60 alphanumeric and symbols  
characters can be used.  
When setting in a hexadecimal digit, up to 10 characters can be  
set in 64 bit and up to 26 characters in 128 bit.  
Test Mail:  
Send a test mail to check if your settings are correct.  
NOTE: If you entered an incorrect address in a test, you may not receive an  
Alert mail. Should this happen, check if the Recipient's Address is correctly  
set.  
NOTE: Unless any one of the "Sender's Address", "SMTP Server's Name" or  
"Recipient's Address 1-3" is selected, "Test Mail" is not available.  
NOTE: Be sure to highlight “OK” and press the ENTER button before execut-  
ing “Test Mail”.  
E-51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Status  
Make sure that "̄" is highlighted and then press the ENTER button.  
The Software keyboard appears. Use the Software keyboard to type  
a password and then highlight "OK" on the “Enter the Password”  
screen and press the ENTER button.  
The [Confirm Password] screen will be displayed.  
2. Type the same password again.Highlight "OK" on the“Enter the Pass-  
word” screen and press the ENTER button.  
Your password will be assigned.  
Delete  
To delete your password:  
1. Highlight [Delete] and press the ENTER button. The "Current Pass-  
word" screen will be displayed.  
Displays the status of the LAN settings.  
IP Address ..... Indicates the IP address of the projector.  
Subnet Mask .. Indicates the subnet mask of the projector.  
MAC Address. Indicates the MAC address of the LAN card.  
2. Use the Software keyboard to type your password. Highlight "OK" on  
the “Current Password” screen and then press the ENTER button.  
Your password will be deleted.  
Setting a Password  
A password can be set for your projector to avoid operation by an unau-  
thorized person.  
In case you forget your password, follow the steps below to delete it.  
1. Select the Advanced menu from the Basic menu. The "Password"  
entry screen will be displayed.  
There are two password options: one for menu and the other for logo.  
When a password is set, doing any one of the following four operations  
will display the Password input screen.  
2. Use the Software keyboard to type "1111".  
Highlight "OK" on the “Password” entry screen and then press the  
ENTER button.  
For Menu:  
*
Changing the menu to Advanced  
The "Password Warning!!" message will be displayed.  
*
Editing the custom menu  
3. Use the Software keyboard to type "3333".  
Highlight "OK" on the “Password” entry screen and then press the  
ENTER button.  
For Logo:  
*
Changing the background  
*
Changing the logo data in PC Card Files  
The "Password Warning!!" message will be displayed.  
4. Use the Software keyboard to type "5555".  
Highlight "OK" on the “Password” entry screen and then press the  
ENTER button.  
The "Delete Password. Are you sure? Yes/No" dialog box will be dis-  
played.  
Procedures for Password setting apply to both Menu and Logo.  
Entry  
To assign your password:  
NOTE: Up to 15 alphanumeric characters can be assigned.  
5. Use the SELECT ̇ or ̈ button to highlight "Yes" and press the EN-  
TER button.  
1. Type a password.  
Highlight "Entry" and press the ENTER button.  
Your password will be deleted.  
The "Enter the Password screen" will be displayed.  
E-52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Use the SELECT ̆̄ button to select "Keyword" and use the soft-  
Security  
ware keyboard to enter a keyword.  
The Security function enables you to protect your projector so that the  
projector will not project a signal unless you enter a keyword. There is  
also an option to lock the projector by using a registered PC card as a  
protect key. Once you have registered your PC card as a protect key,  
you are required to insert the registered PC card into the PC card slot of  
the projector each time you turn on the projector. You can enable the  
Security function by using a keyword only.  
NOTE: To use a PC card as a protect key, you must also set up a keyword.  
Please make a note of your keyword.  
This completes registration of your PC card.  
To enable Security, use the SELECT ̆̄ button to select "Enable" and  
use the SELECT ̆̄ button to select "OK" and "Security function will  
be enabled. An “Are you sure?" message will appear. Use the SELECT  
̇̈ button and press the ENTER button.  
The Security function takes effect.  
To turn on the projector when Security is enabled (when using your  
keyword only).  
1. Press and hold the POWER button for a minimum of two seconds.  
The projector will be turned on and display a message to the effect  
that the projector is security-protected.  
2. Select [Projector Options] → [Security] from the menu and press the  
ENTER button.  
The Release Code input screen will be displayed.  
3. Enter your keyword in the Release Code input screen.  
You can view the projected image.  
Enable/Disable.............. This turns the Security function on or off.  
NOTE: Do not forget your keyword. However, if you forget your keyword, NEC  
or your dealer will provide you with your Release Code. See more information  
at the end of this section.  
Keyword ........................ Enter an appropriate keyword when you use  
the Security function.  
(Up to 10 characters can be used.)  
To turn on the projector when Security is enabled (when using a  
PC card as a protect key).  
The Security function is available only when  
your keyword is entered.  
Use Protect key ............ Check this box to lock your projector when  
using a PC card. To use a keyword without  
1. Insert your registered PC card into the PC card slot.  
2. Press and hold the POWER button for a minimum of two seconds.  
The projector will turn on and then recognize the PC card. Once the  
image has been projected, it will stay on without the PC card.  
a PC card, do not check this box.  
Drive ............................. Switches between PC Card slot 1 and 2.  
Read ............................. Reads data of a PC card.  
•
The security disable mode is maintained until the main power is turned  
off (by setting the main power switch to "O" or unplugging the power  
cord).  
Register ........................ Registers data of the PC card.  
The Security function is not available unless  
at least one PC card is registered. (if the  
“Use Protect key” check box is selected)  
In the following cases you will be asked to check the protect key or  
input the keyword:  
Up to 5 PC cards can be registered.  
(1) When "OK" is selected at an image for which security is set and  
the power is turned off then back on  
Delete ........................... Deletes data of a registered PC card.  
(2) When the main power is turned off then back on while the secu-  
rity function is enabled  
To set up a keyword to enable the Security function without using  
a registered PC card.  
(3) When you attempt to display an image for which security is set  
while the security function is enabled  
1. Use the SELECT ̆̄ button to select “Keyword” and use the soft-  
ware keyboard to enter a keyword.  
•
Blanks (spaces) cannot be used in the Keyword section.  
To delete PC card data you registered.  
NOTE: Please make a note of your keyword.  
2. Use the SELECT ̆̄ button to select “Enable” and use the SELECT  
̆̄ button to select “OK”, then the Security function will be enabled.  
An “Are you sure?” message will appear. Use the SELECT ̇̈ but-  
ton and press the ENTER button.  
1. Use the SELECT ̆̄ button to select "Delete" and use the SELECT  
̇ button to select the list window.  
2. Use the SELECT ̆̄ button to select the PC card data you wish to  
delete.  
The Security function takes effect.  
3. Press the SELECT ̈ button to select "Delete" and press the ENTER  
button.  
To register a PC card as a protect key.  
The PC card data will be deleted.  
1. Insert a PC card into the PC card slot of the projector.  
2. Use the SELECT ̆̄ button to select "Use Protect Key" and press  
the ENTER button.  
3. Use the SELECT ̆̄ button to select "Read" and press the ENTER  
button.  
Data of the PC card will be read into the projector.  
4. Use the SELECT ̆̄ button to select "Register" and press the EN-  
TER button.  
Downloaded data will be registered and be displayed in the list win-  
dow.  
E-53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If you've lost your registered PC card, proceed as follows:  
Using ChalkBoard  
The ChalkBoard feature allows you to write and draw messages on a  
projected image. See page E-29.  
NOTE: NEC or your dealer will provide you with your Release Code in exchange  
for your registered keyword and Request Code. See more information at the end  
of this section.  
NOTE: This feature is available only when using with a USB mouse. See page E-  
28.  
1. Press and hold the POWER button for a minimum of two seconds.  
Help  
The projector will be turned on and display a message to the effect  
that the projector is security-protected.  
Contents  
Provides an online help about how to use the menus.An underlined link  
means that you can move to an adjustment item directly.  
Selecting the underlined link and pressing ENTER moves to the corre-  
sponding adjustment item.  
2. Select [Projector Options] → [Security] from the menu and press hte  
ENTER button.  
The Release Code input screen will be displayed as well as your  
Request Code (24 alphanumeric characters).  
3. Enter your Release Code in the Release Code Input screen.  
Information  
Displays the status of the current signal, and the lamp and the projector  
usage hours. This dialog box has 4 pages.  
The information included are as follows:  
*
If the projector is turned on by entering the Release Code, your Se-  
curity will be disabled.  
[Page 1]  
[Page 2]  
[Page 3]  
NOTE:  
Source Name  
Input Terminal  
Entry No.  
Horizontal Frequency  
Vertical Frequency  
Sync Polarity  
Signal Type  
Video Type  
Sync Type  
Interlace  
Remaining Lamp Time (%)  
Lamp Hour Meter (H)  
Filter Usage (H)  
* Some types of PC cards cannot be registered as your protect key.  
* It is recommended that you register two or more PC cards in case you lose or  
damage your registered PC card.  
Projector Usage (H)  
* Formatting your registered PC card will disable your protect key function.  
NOTE:  
For additional information visit:  
US : http://www.necvisualsystems.com  
Europe : http://www.neceurope.com/  
Global : http://www.nec-pj.com/  
[Page 4]  
Version (BIOS, Firmware, Data)  
NOTE: The progress indicator shows the percentage of remaining bulb life. The  
value informs you of the amount of lamp and projector usage respectively.  
Tools  
Provides tools for setting sleep timer, capturing images, displaying files  
or changing your background logo in a PC Card and drawing.  
Remaining Lamp Time Display  
When the remaining lamp time reaches 0, the Remaining Lamp Time  
bar indicator changes from 0% to 100 Hours and starts counting down.  
If the remaining lamp time reaches 0 hours, the projector will not turn on  
regardless of whether the lamp mode is set to Normal or Eco.  
NOTE: The "Capture" and "PC Card Files" features are required for a PC card.  
Using Sleep Timer  
Returning to Factory Default  
1. Select your desired time between 30 minutes and 16 hours:Off, 0:30,  
1:00, 2:00, 4:00, 8:00, 12:00, 16:00.  
The Factory Default feature allows you to change adjustments and set-  
ting to the factory preset for source except the following:  
2. Select “Set” and press the ENTER button on the remote control.  
3. The remaining time starts counting down.  
All Data ......................... Reset all the adjustments and settings for  
all the signals to the factory preset except  
Remaining Lamp Time, Lamp Hour Meter,  
Filter Usage, Projector Usage, Language,  
Background, Idle mode, Communication  
Speed, LAN Mode, Security and Password.  
4. The projector will turn off after the countdown is complete.  
NOTE:  
• To cancel the preset time, set "Off" for the preset time or turn off the power.  
• When the remaining time reaches 3 minutes before the projector is turned off,  
the "Projector will turn off in 3 minutes" message will be displayed on the  
bottom of the screen.  
Including Entry List:  
Also deletes all the signals in the Entry List  
and returns to the factory preset.  
Using Capture  
Current Signal ............... Resets the adjustments for the current sig-  
nal to the factory preset levels.  
Allows you to capture an image from a source that is currently being  
displayed. The image is saved as JPEG in the PC card. When you se-  
lect Capture from the menu, you will get a tool bar.You can capture an  
image directly using the tool bar when the menu is not displayed.  
See page E-32.  
All the items in "Picture", "Sound", "Image  
Options" and "Picture Management" can be  
reset.  
Using PC Card Files  
The PC Card Files feature allows you to display a list of all the files  
stored in the PC card so that you can select a file you want to display.  
You can also sort files by file name or date, or display the file. See page  
E-33.  
Changing Background Logo:  
You can change the default background logo using the PC Card Files  
feature.  
NOTE: File size must be 256KB or less. Other file formats than JPEG and BMP  
are not available. See page E-29.  
E-54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
This section describes the simple maintenance procedures you should  
follow to replace the lamp and the filter, and to clean the filter, the cabi-  
net and the lens.  
4. Insert a new lamp housing until the lamp housing is plugged into the  
socket.  
Replacing the Lamp  
After your lamp has been operating for 2000 hours (Normal mode on  
the standard life lamp) or longer, the "Lamp" indicator in the cabinet will  
blink red and the message will appear. Even though the lamp may still  
be working, replace it as soon as possible to maintain optimal projector  
performance.  
CAUTION  
•
DO NOT TOUCH THE LAMP immediately after it has been used.  
It will be extremely hot. Turn the projector off, wait 90 seconds,  
turn off the main power switch, and then disconnect the power  
cable. Allow at least one hour for the lamp to cool before han-  
dling.  
CAUTION:Do not use a lamp other than the NEC replacement lamp  
(Standard life lamp: MT70LP (MT1075), MT60LP (MT1065) or Ex-  
tended life lamp: MT60LPS).  
5. Secure it in place with the two screws.  
Be sure to tighten the screws.  
•
•
DO NOT REMOVE ANY SCREWS except the two lamp case  
screws.You could receive an electric shock.  
The projector will turn off and go into stand by mode after 2100  
hours (Normal mode on the standard life lamp) of service. If this  
happens, be sure to replace the lamp. If you continue to use the  
lamp after 2000 hours (Normal mode on the standard life lamp)  
of use, the lamp bulb may shatter, and pieces of glass may be  
scattered in the lamp housing. Do not touch them as the pieces  
of glass may cause injury.  
If this happens, contact your NEC dealer for lamp replacement.  
To replace the lamp:  
6. Reattach the lamp cover.  
NOTE: The optional lamp comes with a flat-head screwdriver.  
1. Remove the lamp cover by pushing two grooves lightly with the flat-  
head screwdriver.  
7. Snap the lamp cover into place.  
2. Loosen the two screws securing the lamp housing until the screw-  
driver goes into a freewheeling condition. The two screws are not  
removable.  
NOTE: Replacing a new lamp automatically clears the lamp usage hours.  
NOTE: The lamp housing has an EEPROM chip memorizing its amount of usage  
hours. You can check the amount usage hours in Information of the menu. (The  
standard lamp and the optional lamp have an EEPROM chip in it so that when  
you remove it, your lamp usage hours are saved in its own memory. The projec-  
tor reads the lamp usage hours from the EEPROM chip to display them in Infor-  
mation of the menu.)  
3. Remove the lamp housing by pulling out the handle.  
NOTE: There is an interlock on this case to prevent the risk of electrical shock.  
Do not attempt to circumvent this interlock.  
Interlock  
E-55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Reinstall the new filter cover.  
Catch  
Cleaning  
Cleaning or Replacing the Filter  
The air-filter sponge keeps the inside of the projector from dust or dirt  
and should be cleaned after every 100 hours of operation (more often in  
dusty conditions).If the filter is dirty or clogged, your projector may over-  
heat.  
CAUTION  
•
Turn off the power and unplug the projector before replacing  
the filter.  
•
•
Only clean the outside of the filter cover with a vacuum cleaner.  
Do not attempt to operate the projector without the filter cover.  
NOTE: Do not wash the filter with soap and water. Soap and water will damage  
the filter membrane. Before replacing the filter, remove dust and dirt from the  
projector cabinet. Keep out dust and during filter replacement.  
To clean the air-filter:  
Vacuum the filter-through the filter cover.  
NOTE: When you replace the lamp, it is also wise to replace the filter. The filter  
comes in the same package with your replacement lamp.  
Cleaning the Cabinet and the Lens  
To reset the filter usage time, from the menu, select [Projector Options]  
→ [Setup] → [Page 4] → [Clear Filter Usage Meter] → [OK].  
See also page E-47 for resetting the filter usage time.  
To replace the filter (sponge):  
1. Remove the filter cover by pushing up on the catch of the cover until  
you feel it detach.  
1. Turn off the projector before cleaning.  
2. Clean the cabinet periodically with a damp cloth. If heavily soiled,  
use a mild detergent. Never use strong detergents or solvents such  
as alcohol or thinner.  
3. Use a blower or lens paper to clean the lens, and be careful not to  
scratch or mar the lens.  
2. Gently peel off the filter (sponge) and replace it with the new one.  
E-56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
This section helps you resolve problems you may encounter while setting up or using the projector.  
Power Indicator  
Indicator Condition  
Projector Condition  
Note  
Off  
The main power is off  
–
Blinking light  
Steady light  
Green  
0.5 sec ON,  
0.5 sec OFF  
2.5 sec ON,  
0.5 sec OFF  
0.5 sec ON,  
0.5 sec OFF  
The projector is getting ready Wait for a moment.  
to turn on.  
The projector is in Sleep mode.  
–
Orange  
The projector is cooling down. Wait for a moment.  
Green  
The projector is turned on.  
The projector is in Standby or  
Idle.  
–
–
Orange  
Status Indicator  
Indicator Condition  
Off  
Projector Condition  
Note  
Normal  
–
Blinking light  
Red  
1 cycle (0.5 sec ON, Lamp cover error or lamp Replace the lamp cover or  
2.5 sec OFF)  
housing error  
lamp housing correctly.  
The projector is overheated.  
Move the projector to a cooler  
location.  
2 cycle (0.5 sec ON, Temperature error  
0.5 sec OFF)  
3 cycle (0.5 sec ON, Power error  
0.5 sec OFF)  
Power unit will not work cor-  
rectly.  
4 cycle (0.5 sec ON, Fan error  
0.5 sec OFF)  
Fans will not work correctly.  
6 cycle (0.5 sec ON, Lamp error  
0.5 sec OFF)  
Lamp fails to light. Wait a full  
minute and then turn on again.  
Contact your dealer.  
7 cycles (0.5 sec ON,  
0.5 sec OFF)  
Fails to read lamp data  
Re-firing the lamp  
Control key locked  
Green  
The projector is re-firing.  
Steady light  
Orange  
You have pressed control  
panel key when Control Key  
Lock is enabled.  
Green  
Idle condition  
–
Lamp Indicator  
Indicator Condition  
Projector Condition  
Note  
Off  
Normal  
–
Blinking light  
Steady light  
Red  
Lamp has reached its end of Replace the lamp.  
life. Lamp replacement mes-  
sage will be displayed.  
Red  
Lamp has been used beyond Replace the lamp.  
its limit. The projector will not  
turn on until the lamp is re-  
placed.  
Green  
Lamp mode is set to Eco mode  
Extended life lamp is used  
–
–
Orange  
E-57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Common Problems & Solutions  
Problem  
Check These Items  
Does not turn on  
•
Check that the power cable is plugged in and that the power button on the projector cabinet or the remote  
control is on. See pages E-17 and 18.  
•
•
Ensure that the lamp cover or lamp housing is installed correctly. See page E-55.  
Check to see if the projector has overheated or the lamp has reached the end of its usable life. If there is  
insufficient ventilation around the projector or if the room where you’re presenting is particularly warm, move  
the projector to a cooler location.  
•
•
The lamp may fail to light. Wait a full minute and then turn on the power again.  
The lamp has reached the end of its usable life. Replace the lamp.  
No picture  
•
•
•
•
•
Use the menu to select your source (RGB 1/2, Video, S-Video, DVI, Viewer or LAN). See page E-19.  
Ensure your cables are connected properly.  
Use menus to adjust the brightness and contrast. See page E-40.  
Remove the lens cap.  
Reset the settings or adjustments to factory preset levels using the Factory Default in the Adjustment Menu.  
See page E-54.  
•
•
Enter your registered keyword if the Security function is enabled. See page E-53.  
When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning  
on the power to the notebook PC. In most cases signal cannot be output from RGB output unless the notebook  
PC is turned on after connecting with the projector.  
* If the screen goes blank while using your remote control, it may be the result of the computer's screen-  
saver or power management software.  
* If you accidentally hit the POWER button on the remote control, wait 60 seconds and then press the POWER  
button again to resume.  
•
See also the next page.  
Image isn’t square to the  
screen  
•
•
Reposition the projector to improve its angle to the screen. See page E-19.  
Use the 3DReform function to correct the trapezoid distortion. See page E-20.  
Picture is blurred  
•
•
•
Adjust the focus. See page E-20.  
Reposition the projector to improve its angle to the screen. See page E-19.  
Ensure that the distance between the projector and screen is within the adjustment range of the lens. See page  
E-12 and -13.  
•
Condensation may form on the lens if the projector is cold, brought into a warm place and is then turned on.  
Should this happen, let the projector stand until there is no condensation on the lens.  
Image is scrolling verti-  
cally, horizontally or  
both  
•
•
Use menus or Source button on the remote control or the cabinet to select the source you want to input.  
Adjust the computer image manually with the Position/Clock in the Image. See page E-41.  
Remote control does  
not work  
•
•
•
•
Install new batteries. See page E-11.  
Make sure there are no obstacles between you and the projector.  
Stand within 22 feet (7 m) of the projector. See page E-11.  
Make sure that you are in the Projector mode and the PJ button lights in red. If not, press the PJ button. See  
page E-24.  
Indicator is lit or blink-  
ing  
•
•
•
See the Status Indicator on pages E-57.  
Cross color in RGB  
mode  
If Auto Adjust is off, turn it on or adjust the image manually with the Position/Clock in the Image Options. See  
pages E-41 and -47.  
USB mouse does not  
work  
Make sure that your USB mouse is properly connected to the projector.  
The projector may not support some brands of a USB mouse.  
For more information contact your dealer.  
E-58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If there is no picture, or the picture is not displayed correctly.  
•
•
•
•
Power on process for the projector and the PC.  
Be sure to connect the RGB cable between the projector and the computer before turning on the computer. There are some notebook PCs,  
which do not output signal unless there is a projectors or monitor connected first.  
NOTE: You can check the horizontal frequency of the current signal in the projector’s menu under Information. If it reads “0kHz”, this means there is no  
signal being output from the computer. See page E-54 or go to next step.  
Enabling the computer’s external display.  
Displaying an image on the notebook PC’s screen does not necessarily mean it outputs a signal to the projector. When using a PC  
compatible laptop, a combination of function keys will enable/disable the external display. Usually, the combination of the ‘Fn” key along  
with one of the 12 function keys gets the external display to come on or off. For example, NEC laptops use Fn + F3, while Dell laptops use  
Fn + F8 key combinations to toggle through external display selections.  
Non-standard signal output from the computer  
If the output signal from a notebook PC is not an industry standard, the projected image may not be displayed correctly. Should this  
happen, deactivate the notebook PC’s LCD screen when the projector display is in use. Each notebook PC has a different way of  
deactivate/reactivate the local LCD screens as described in the previous step. Refer to your computer’s documentation for detailed  
information.  
Image displayed is incorrect when using a Macintosh  
When using a Macintosh with the projector, set the DIPswitch of the Mac adapter (not supplied with the projector) according to your  
resolution. After setting, restart your Macintosh for the changes to take affect.  
For setting display modes other than those supported by your Macintosh and the projector, changing the DIP switch on a Mac adapter may  
bounce an image slightly or may display nothing. Should this happen, set the DIP switch to the 13” fixed mode and then restart your  
Macintosh. After that, restore the DIP switches to a displayable mode and then restart the Macintosh again.  
NOTE: A Video Adapter cable manufactured by Apple Computer is needed for a PowerBook which does not have a mini D-Sub 15-pin connector.  
•
•
Mirroring on a PowerBook  
*
When using the projector with a Macintosh PowerBook, output may not be set to 1024 
ן
 768 unless “mirroring” is off on your  
PowerBook. Refer to owner’s manual supplied with your Macintosh computer for mirroring.  
Folders or icons are hidden on the Macintosh screen  
Folders or icons may not be seen on the screen. Should this happen, select [View] → [Arrange] from the Apple menu and arrange icons.  
E-59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
This section provides technical information about the MT1075 Projector's performance  
Model Number  
MT1075  
Optical  
LCD Panel  
Resolution  
Lens  
1.0" p-Si TFT active-matrix with Micro Lens Array  
1024
ן
768 pixels up to UXGA with Advanced AccuBlend  
Motorized zoom and focus:  
F1.74 – 2.18 f=30.8mm – 41.6mm  
Lamp  
Color Image Sensor  
Image Size  
Projection Distance  
Projection Angle  
300 W DC standard / 160 W DC (Optional Extended life lamp)  
23,040 pixels (160 dots
ן
144 lines)  
25 inches – 500 inches (0.6 m – 12.7 m) diagonal  
2.96 ft – 51.23 ft / 1.0 m (Tele) – 15.6 m (Wide)  
Tele : 10.3° – 10.7° Wide : 13.7° – 14.4°  
Electrical  
Inputs  
2 RGB (D-Sub 15 Pin/BNC
ן
5), 1 DVI, 1 S-Video, 1 Video, 2 PC Card,  
3 Stereo Mini Audio, 2 (L/R) RCA Audio, 1 PC Control, 1 (L/R) RCA Audio  
1 RGB, 1 Stereo Mini Audio  
Outputs  
USB Port  
1 A Type, 1 B Type  
Video Compatibility  
NTSC, NTSC4.43, PAL, PAL-60, PAL-N, PAL-M, SECAM, HDTV:1080p, 1080i, 720p, 576p, 576i, 480p, 480i  
(w/optional cable)  
Scan Rate  
Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over) / Vertical: 48 Hz to 120 Hz  
RGB: 80 MHz (-3dB)  
16.7 million colors simultaneously, Full color  
NTSC / NTSC4.43/PAL/PAL-M/PAL-N/PAL60: 600 TV lines  
SECAM: 350 TV lines  
Video Bandwidth  
Color Reproduction  
Horizontal Resolution  
RGB: 1024 dots (H)
ן
768 dots (V),  
External Control  
Sync Compatibility  
Built-in Speakers  
Power Requirement  
Input Current  
RS232, IR, USB, LAN (optional)  
Separate Sync / Composite Sync / Sync on G  
5W
ן
2 (stereo)  
100 - 240V AC, 50 / 60 Hz  
4.3A  
Power Consumption  
1.0W in Standby mode/14W in Idle mode/415W in Lamp Normal mode/345W in Lamp Eco mode  
(250W in use of the optional Extended Life lamp)  
Mechanical  
Installation  
Dimensions  
Orientation: Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear  
13.2" (W)
ן
4.5" (H)
ן
12.7" (D)  
334mm (W)
ן
115mm (H)
ן
323mm (D)  
(not including protrusions)  
Net Weight  
13.0 lbs / 5.9 kg  
Environmental Considerations  
Operational Temperatures  
Storage Temperatures :  
:
32° to 95°F (0° to 35°C), 20% to 80% humidity (non-condensing)  
14° to 122°F (-10° to 50°C), 20% to 80% humidity (non-condensing)  
UL/C-UL Approved (UL 60950, CSA 60950)  
Regulations  
Meets DOC Canada Class B requirements  
Meets FCC Class B requirements  
Meets AS/NZS CISPR22 Class B  
Meets EMC Directive (EN55022, EN55024, EN61000-3-2, EN61000-3-3)  
Meets Low Voltage Directive (EN60950, TUV GS Approved)  
For additional information visit:  
US : http://www.necvisualsystems.com  
Europe : http://www.neceurope.com/  
Global : http://www.nec-pj.com/  
LCD panels are inherently susceptible to pixel defects.  
For additional information regarding pixel data, please contact your local NEC sales office.  
The specifications are subject to change without notice.  
E-60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This section provides technical information about the MT1065 Projector's performance  
Model Number  
MT1065  
Optical  
LCD Panel  
Resolution  
Lens  
1.0" p-Si TFT active-matrix with Micro Lens Array  
1024
ן
768 pixels up to UXGA with Advanced AccuBlend  
Motorized zoom and focus:  
F1.74 – 2.18 f=30.8mm – 41.6mm  
Lamp  
Color Image Sensor  
Image Size  
Projection Distance  
Projection Angle  
275 W DC standard / 160 W DC (Optional Extended life lamp)  
23,040 pixels (160 dots
ן
144 lines)  
25 inches – 500 inches (0.6 m – 12.7 m) diagonal  
2.96 ft – 51.23 ft / 1.0 m (Tele) – 15.6 m (Wide)  
Tele : 10.3° – 10.7° Wide : 13.7° – 14.4°  
Electrical  
Inputs  
2 RGB (D-Sub 15 Pin/BNC
ן
5), 1 DVI, 1 S-Video, 1 Video, 2 PC Card,  
3 Stereo Mini Audio, 2 (L/R) RCA Audio, 1 PC Control, 1 (L/R) RCA Audio  
1 RGB, 1 Stereo Mini Audio  
Outputs  
USB Port  
1 A Type, 1 B Type  
Video Compatibility  
NTSC, NTSC4.43, PAL, PAL-60, PAL-N, PAL-M, SECAM, HDTV:1080p, 1080i, 720p, 576p, 576i, 480p, 480i  
(w/optional cable)  
Scan Rate  
Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over) / Vertical: 48 Hz to 120 Hz  
RGB: 80 MHz (-3dB)  
16.7 million colors simultaneously, Full color  
NTSC / NTSC4.43/PAL/PAL-M/PAL-N/PAL60: 550 TV lines  
SECAM: 350 TV lines  
Video Bandwidth  
Color Reproduction  
Horizontal Resolution  
YCbCr: 800 TV lines  
RGB: 1024 dots (H)
ן
768 dots (V),  
External Control  
Sync Compatibility  
Built-in Speakers  
Power Requirement  
Input Current  
RS232, IR, USB, LAN (optional)  
Separate Sync / Composite Sync / Sync on G  
5W
ן
2 (stereo)  
100 - 120V AC / 200 - 240V AC, 50 / 60 Hz  
4.0A (100 - 120V AC) / 2.0A (200 - 240V AC)  
1.0W in Standby mode/390W in Lamp Normal mode/320W in Lamp Eco mode  
(250W in use of the optional Extended Life lamp)  
Power Consumption  
Mechanical  
Installation  
Dimensions  
Orientation: Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear  
13.2" (W)
ן
4.5" (H)
ן
12.7" (D)  
334mm (W)
ן
115mm (H)
ן
323mm (D)  
(not including protrusions)  
Net Weight  
13.0 lbs / 5.9 kg  
Environmental Considerations  
Operational Temperatures  
Storage Temperatures :  
Regulations  
:
32° to 95°F (0° to 35°C), 20% to 80% humidity (non-condensing)  
14° to 122°F (-10° to 50°C), 20% to 80% humidity (non-condensing)  
UL Approved (UL 1950, CSA 950)  
Meets DOC Canada Class B requirements  
Meets FCC Class B requirements  
Meets AS/NZS3548 Class B  
Meets EMC Directive (EN55022, EN55024, EN61000-3-2, EN61000-3-3)  
Meets Low Voltage Directive (EN60950, TUV GS Approved)  
For additional information visit:  
US : http://www.necvisualsystems.com  
Europe : http://www.neceurope.com/  
Global : http://www.nec-pj.com/  
LCD panels are inherently susceptible to pixel defects.  
For additional information regarding pixel data, please contact your local NEC sales office.  
The specifications are subject to change without notice.  
E-61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
Cabinet Dimensions  
334(13.15")  
Lens center  
92.2(3.63")  
Lens center  
Unit = mm (inch)  
16(0.63")  
Pin Assignments of D-Sub RGB Input Connector  
Mini D-Sub 15 Pin Connector  
Pin No.  
RGB Signal (Analog)  
YCbCr Signal  
5
4
3
2
1
10  
9
8
7
6
1
2
Red  
Cr  
Y
15 14 13 12 11  
Green or Sync on Green  
Blue  
3
Cb  
Signal Level  
4
Ground  
Video signal : 0.7Vp-p (Analog)  
Sync signal : TTL level  
* RGB 1 Input only  
5
Ground  
6
Red Ground  
Cr Ground  
Y Ground  
Cb Ground  
7
Green Ground  
Blue Ground  
8
9
No Connection  
Sync Signal Ground  
SCART Sync  
Bi-directional DATA (SDA)*  
10  
11  
12  
13  
14  
15  
Horizontal Sync or Composite Sync  
Vertical Sync  
Data Clock*  
E-62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Compatible Input Signal List  
Signal  
Resolution  
( Dots )  
–
Frequency H.  
( kHz )  
15.734  
Refresh Rate  
( Hz )  
60  
NTSC  
PAL  
–
15.625  
15.625  
31.47  
31.47  
31.47  
34.97  
35  
50  
SECAM  
VESA  
–
50  
640 
ן
 480  
640 
ן
 480  
640 
ן
 480  
640 
ן
 480  
640 
ן
 480  
640 
ן
 480  
640 
ן
 480  
640 
ן
 480  
640 
ן
 480  
720 
ן
 350  
720 
ן
 400  
720 
ן
 350  
720 
ן
 400  
800 
ן
 600  
800 
ן
 600  
800 
ן
 600  
800 
ן
 600  
800 
ן
 600  
832 
ן
 624  
1024 
ן
 768  
1024 
ן
 768  
1024 
ן
 768  
1024 
ן
 768  
1024 
ן
 768  
1024 
ן
 768  
1152 
ן
 864  
1152 
ן
 870  
1152 
ן
 900  
1152 
ן
 900  
1280 
ן
 960  
1280 
ן
 1024  
1280 
ן
 1024  
1280 
ן
 1024  
1280 
ן
 1024  
1280 
ן
 1024  
1280 
ן
 1024  
1400 
ן
 1050  
1920 
ן
 1080  
–
59.94  
IBM  
60  
MAC  
60  
MAC  
66.67  
MAC  
66.67  
VESA  
37.86  
37.5  
72.81  
VESA  
75  
IBM  
39.375  
43.269  
31.469  
37.927  
39.44  
39.44  
35.16  
37.879  
48.077  
46.88  
53.674  
49.725  
35.5  
75  
VESA  
85.01  
IBM  
70.09  
VESA  
85.04  
IBM  
87.85  
IBM  
87.85  
VESA  
56.25  
VESA  
60.32  
VESA  
72.19  
VESA  
75  
VESA  
85.06  
MAC  
74.55  
VESA  
43 Interlaced  
VESA  
48.363  
56.476  
60.241  
60.023  
68.677  
67.5  
60  
VESA  
70.07  
MAC  
74.93  
VESA  
75.03  
VESA  
85  
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
VESA  
75  
MAC  
68.681  
61.796  
71.736  
60  
75.06  
SUN  
65.95  
SGI  
76.05  
VESA  
60  
VESA  
63.981  
69.89  
78.125  
81.13  
79.976  
91.146  
–
60.02  
MAC  
65.2  
HP  
72.01  
SUN  
76.11  
VESA  
75.03  
VESA  
85.02  
SXGA+  
HDTV (1080p)  
SDTV(576i)(625i)  
SDTV(576p)(625p)  
HDTV (1080i)(1125i)  
HDTV (1080i)(1125i)  
HDTV (720p)(750p)  
SDTV (480p)(525p)  
VESA  
–
67.5  
60  
15.6  
50  
–
31.5  
50  
1920 
ן
 1080  
1920 
ן
 1080  
1280 
ן
 720  
–
33.75  
28.13  
45  
60 Interlace  
50 Interlace  
60 Progressive  
59.94 Progressive  
60  
31.47  
75.0  
1600 
ן
 1200  
1600 
ן
 1200  
1600 
ן
 1200  
1600 
ן
 1200  
–
VESA  
81.3  
65  
VESA  
87.5  
70  
VESA  
93.75  
15.734  
15.625  
75  
DVD YCbCr  
DVD YCbCr  
59.94 Interlaced  
50 Interlaced  
–
#: Images in above flagged with # are compressed with Advanced AccuBlend.  
NOTE: Some composite sync signals may not be displayed correctly.  
Signals other than those specified in the table above may not be displayed correctly. If this should happen, change  
the refresh rate or resolution on your PC. Refer to Display Properties help section of your PC for procedures.  
UXGA (1600
ן
1200) is supported for separate sync signal only.  
E-63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PC Control Codes and Cable Connection  
Using Software Keyboard  
PC Control Codes  
Function  
Code Data  
POWER ON  
02H 00H 00H 00H 00H 02H  
POWER OFF  
02H 01H 00H 00H 00H 03H  
INPUT SELECT RGB 1  
INPUT SELECT RGB 2  
INPUT SELECT VIDEO  
INPUT SELECT S-VIDEO  
02H 03H 00H 00H 02H 01H 01H 09H  
02H 03H 00H 00H 02H 01H 02H 0AH  
02H 03H 00H 00H 02H 01H 06H 0EH  
02H 03H 00H 00H 02H 01H 0BH 13H  
INPUT SELECT DVI (DIGITAL) 02H 03H 00H 00H 02H 01H 1AH 22H  
INPUT SELECT VIEWER  
PICTURE MUTE ON  
PICTURE MUTE OFF  
SOUND MUTE ON  
02H 03H 00H 00H 02H 01H 1FH 27H  
02H 10H 00H 00H 00H 12H  
02H 11H 00H 00H 00H 13H  
02H 12H 00H 00H 00H 14H  
02H 13H 00H 00H 00H 15H  
02H 14H 00H 00H 00H 16H  
02H 15H 00H 00H 00H 17H  
SOUND MUTE OFF  
ON SCREEN MUTE ON  
ON SCREEN MUTE OFF  
1 to 0 and Characters  
........................... Use to type in IP address or projector name  
SP ...................... Inserts a space  
NOTE: Contact your local dealer for a full list of PC Control Codes if needed.  
BS ...................... Deletes one character backward  
̇ ........................ Returns to the previous  
̈ ........................ Advances to the next  
Cable Connection  
OK ...................... Executes the selection  
Cancel ................ Cancels the selection  
Communication Protocol  
Baud rate ............................. 38400 bps  
Data length .......................... 8 bits  
Parity.................................... No parity  
Stop bit ................................ One bit  
X on/off ................................ None  
Communications procedure . Full duplex  
Drag bar ............. Use to move the software keyboard on the screen.  
MODE ................ Selects one of three modes for alphabet and special  
characters.  
NOTE: Depending on the equipment, a lower baud rate may be recommended  
for long cable runs.  
PC Control Connector (D-SUB 9P)  
To TxD of PC  
To RxD of PC  
To GND of PC  
1
2
3
4
5
6
7
8
9
To RTS of PC  
To CTS of PC  
NOTE: Pins 1, 4, 6 and 9 are no used.  
NOTE: Jumper “Request to Send” and “Clear to Send” together on both ends of  
the cable to simplify cable connection.  
E-64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power: This controls the power of the projector.  
On .................. Power is switched on.  
Operation Using an HTTP Browser  
Off .................. Power is switched off.  
Overview  
The use of HTTP server functions will allow control of the projector from  
a web browser without the installation of special software. Please be  
sure to use “Microsoft Internet Explorer 4.x” or a higher version for the  
web browser. (This device uses “JavaScript” and “Cookies” and the  
browser should be set to accept these functions. The setting method  
will vary depending on the version of browser. Please refer to the help  
files and the other information provided in your software.)  
Volume: This controls the volume of the projector.  
̆ .................... Increments the volume adjustment value.  
̄ .................... Decrements the volume adjustment value.  
Mute: This controls the mute function of the projector.  
All On ............. Mutes each of the video, audio, and on-screen dis-  
play functions.  
NOTE:  
All Off ............. Cancels the muting of each of the video, audio, and  
on-screen display functions.  
* The use of HTTP server functions is not available during Standby mode.  
* The display’s or button’s response can be slowed down or operation may not  
be accepted depending the settings of your network. Should this happen, con-  
sult your network administrator.  
* The projector may not respond if its buttons are repeatedly pressed in rapid  
intervals. Should this happen, wait a moment and repeat. If you still can’t get  
any response, pull out and then re-insert the LAN card.  
* Do not use the HTTP Server functions and the Dynamic Image Utility included  
on the supplied CD-ROM. Using both at the same time may result in a connec-  
tion failure or slow response.  
Picture On ...... Mutes the video.  
Picture Off ...... Cancels the video muting.  
Sound On ...... Mutes the audio.  
Sound Off ...... Cancels the audio muting.  
OSD On ......... Mutes the on-screen display.  
OSD Off ......... Cancels the muting of the on-screen display.  
Access is gained to the HTTP server functions by specifying  
http:// <the projector’s IP address> /index.html  
in the entry column of the URL.  
Picture: Controls the video adjustment of the projector.  
Brightness ̆ .. Increments the brightness adjustment value.  
Brightness ̄ .. Decrements the brightness adjustment value.  
Contrast ̆ ..... Increments the contrast adjustment value.  
Contrast ̄ ..... Decrements the contrast adjustment value.  
Color ̆ .......... Increments the color adjustment value.  
Color ̄ .......... Decrements the color adjustment value.  
Hue ̆ ............ Increments the hue adjustment value.  
Hue ̄ ............ Decrements the hue adjustment value.  
Sharpness ̆ . Increments the sharpness adjustment value.  
Sharpness ̄ . Decrements the sharpness adjustment value.  
Preparation Before Use  
Make network connections and set up the projector and confirm that it  
is complete before engaging in browser operations. (See “Setting LAN  
Mode” on page E-50.)  
Operation with a browser that uses a proxy server may not be possible  
depending on the type of proxy server and the setting method. Although  
the type of proxy server will be a factor, it is possible that items that have  
actually been set will not be displayed depending on the effectiveness  
of the cache, and the contents set from the browser may not be re-  
flected in operation. It is recommended that a proxy server not be used  
unless it is unavoidable.  
*
The functions that can be controlled will vary depending on the sig-  
nal being input to the projector.  
Handling of the Address for Operation via a Browser  
Regarding the actual address that is entered for the address or entered  
to the URL column when operation of the projector is via a browser, the  
host name can be used as it is when the host name corresponding to  
the IP address of the projector has been registered to the domain name  
server by a network administrator, or the host name corresponding to  
the IP address of the projector has been set in the “HOSTS” file of the  
computer being used.  
Source Select: This switches the input connector of the projector.  
RGB1 ............. Switches to the RGB 1 connector.  
RGB2 ............. Switches to the RGB 2 connector.  
Video ............. Switches to the Video connector.  
S-Video .......... Switches to the S-Video connector.  
DVI(DIGITAL) . Switches to the DVI connector  
Viewer ............ Switches to the Viewer.  
Example 1: When the host name of the projector has been set to  
“pj.nec.co.jp”, http://pj.nec.co.jp/index.html is specified for the ad-  
dress or the entry column of the URL.  
LAN ................ Switches to a LAN signal.  
Projector Status: This displays the condition of the projector.  
Remaining Lamp Time .. Displays the remaining life of the lamp as a  
percentage.  
Example 2: When the IP address of the projector is “192.168.73.1”,  
access is gained to the HTTP server functions by specifying  
http://192.168.73.1/index.html for the address or the entry column  
of the URL.  
Lamp Hour Meter .......... Displays how many hours the lamp has been  
used.  
Structure of the HTTP Server  
Projector Usage ............ Displays how many hours the projector has  
been used.  
Filter Usage .................. Displays how many hours the filter has been  
used.  
Error Status .................. Displays the status of errors occurring within  
the projector.  
Refresh ......................... Updates the display of the following condi-  
tions.  
E-65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6) Problems or damage caused by expendable supplies or devices  
connected to the product other than those designated by NEC.  
TravelCare Guide  
7) Problems caused by natural consumption, wear or deterioration  
of parts under normal usage conditions.  
TravelCare - a service for international travelers  
This product is eligible for "TravelCare", NEC's unique international war-  
ranty.  
Please note that TravelCare coverage differs in part from coverage un-  
der the warranty included with the product.  
8) Problems or damage to lamps and other expendable supplies,  
included parts or optional parts.  
9) Other conditions stipulated in the warranty included with the prod-  
uct also apply.  
Services offered with TravelCare  
This warranty allows customers to receive service on their product at  
the NEC and NEC-designated service stations in the countries listed  
herein when temporarily traveling internationally for business or plea-  
sure.  
NOTE: The product can be used overseas with voltages of 100 to 120V and 200  
to 240V by using a power cable suited for the standards and power source volt-  
age of the country in which the product is being used.  
For details on services offered by the different service stations, please  
refer to the "List of TravelCare Outlets" below.  
List of TravelCare Outlets  
This list applies as of April 1, 2004.  
For the most up-to-date information, please refer to the websites of the  
service stations in the various countries on the List of TravelCare Out-  
lets or to the NEC website at http://www.nec-pj.com.  
1 Repair services  
The product will be repaired and delivered within 10 business days,  
not including shipping time.  
During the term of warranty, the cost of maintenance parts, labor  
costs for repairs and shipping costs within the service station's cov-  
erage area are covered by the warranty.  
In Europe  
NEC Europe, Ltd. / European Technical Centre  
Address:  
Telephone:  
Fax Line:  
Email Address:  
WEB Address:  
Unit G, Stafford Park 12, Telford TF3 3BJ, U.K.  
+44 1952 237000  
+44 1952 237006  
[email protected]  
http://www.neceur.com  
2 Replacement product rental service  
If the customer desires, he or she can rent a replacement product  
while the original product is being repaired.  
Fee: US$200 for 12 days  
This fee must be paid at the local service station in cash or credit  
card.  
The $200 rental fee is non-refundable even if the customer rents it  
less than 12 days before returning.  
The replacement product will be delivered within 3 business days.  
If the customer did not return the replacement product within 12 days,  
the customer will be charged the price of the unit.  
If the customer returned the replacement product in a faulty or dam-  
aged condition, the repair cost will be charged to the customer.  
Note that this service is not offered in all countries and regions. Please  
refer to the "List of TravelCare Outlets".  
(Regions Covered)  
EU:  
Austria*, Belgium*, Denmark*, Finland*, France*, Germany*,  
Greece*, Ireland*, Italy*, Luxembourg*, The Netherlands*,  
Portugal*, Spain*, Sweden* and the United Kingdom*  
Norway*, Iceland and Liechtenstein  
EEA:  
In North America  
NEC Solutions (America), Inc.  
Address:  
1250 N. Arlington Heights Road, Itasca,  
Illinois 60143, U.S.A.  
+1 800 836 0655  
+1 800 356 2415  
[email protected]  
http://www.necvisualsystems.com  
Telephone:  
Fax Line:  
Email Address:  
WEB Address:  
In addition, this replacement product rental service is not offered af-  
ter the product's warranty has expired.  
Term of warranty  
(Regions Covered)  
U.S.A. *, Canada*  
1
a. Upon presentation of the warranty or receipt received upon pur-  
chase:  
In Oceania  
NEC Australia Pty., Ltd.  
Address: New South Wales;  
184 Milperra Road, Reversby 2212  
Valid for the term indicated on the warranty or the normal term of  
warranty for the country of purchase.  
b. When only the product is brought in:  
Victoria;  
Valid for a period of within 14 months of the date of manufacture  
indicated by the serial number attached to the product.  
480 Princess Hwy Noble Park 3174  
South Australia;  
84A Richmond Road, Keswick 5035  
Queensland;  
116 Ipswich Road, Woollongabba 4102  
Western Australia;  
45 Sarich Court Osborne Park 6017  
131 632 (from domestic)  
2 When a product whose term of warranty is expired is brought in:  
Repairs will be offered for a fee. In this case the customer is not  
eligible for the replacement product rental service.  
3 In the following cases, repairs may be charged, even if the product's  
warranty is still in effect:  
Telephone:  
1) If the term of warranty, model name, serial number and name of  
the store of purchase are not indicated on the warranty or have  
been altered.  
+61 8 8375 5706 (from overseas)  
+61 8 8375 5757  
Fax Line:  
Email Address:  
WEB Address:  
[email protected]  
http://www.nec.com.au  
2) Problems or damage caused by dropping or shocks during ship-  
ment or movement by the customer or by improper handling by  
the customers.  
(Regions Covered)  
Australia*, New Zealand  
3) Problems or damage caused by improper usage or unwarrant-  
able alterations or repairs by the customer.  
4) Problems or damage caused by fire, salt damage, gas damage,  
earthquakes, lightning damage, storm or flood damage or other  
natural disasters or such external factors as dust, cigarette  
smoke, abnormal voltage, etc.  
5) Problems or damage caused by use in hot or humid places, in  
vehicles, boats or ships, etc.  
E-66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In Asia and Middle East  
NEC Viewtechnology, Ltd.  
Address:  
686-1, Nishioi, Oi-Machi, Ashigarakami-Gun,  
Lenso Communication Co., Ltd.  
Kanagawa 258-0017, Japan  
+81 465 85 2369  
+81 465 85 2393  
Address:  
292 Lenso House 4, 1st Floor, Srinakarin Road,  
Huamark, Bangkapi, Bangkok 10240, Thailand  
+66 2 375 2425  
Telephone:  
Fax Line:  
Telephone:  
Email Address:  
WEB Address:  
[email protected]  
http://www.nec-pj.com  
Fax Line:  
Email Address:  
WEB Address:  
+66 2 375 2434  
[email protected]  
http://www.lenso.com  
(Regions Covered)  
Japan*  
(Regions Covered)  
Thailand  
NEC Hong Kong Ltd.  
Address:  
11th Floor, Tower B, New Mandarin Plaza, 14  
Science Museum Road,  
ABBA Electronics L.L.C.  
Address:  
Tariq Bin Ziyad Road, P.O.Box 327, Dubai,  
United Arab Emirates  
+971 4 371800  
Tsim Sha Tsui East, Kowloon, Hong Kong  
+852 2369 0335  
+852 2795 6618  
Telephone:  
Fax Line:  
Telephone:  
Fax Line:  
+971 4 364283  
Email Address:  
WEB Address:  
[email protected]  
http://www.nec.com.hk  
Email Address:  
[email protected]  
(Regions Covered)  
(Regions Covered)  
Hong Kong  
United Arab Emirates  
Samir Photographic Supplies  
NEC Taiwan Ltd.  
Address:  
Address:  
Telephone:  
Fax Line:  
P.O.Box 599, Jeddah 21421, Saudi Arabia  
+966 2 6828219  
+966 2 6830820  
7F, No.167, SEC.2, Nan King East Road, Taipei,  
Taiwan, R.O.C.  
Telephone:  
+886 2 8500 1734  
Email Address:  
[email protected]  
Fax Line:  
+886 2 8500 1420  
Email Address:  
WEB Address:  
[email protected]  
http://www.nec.com.tw  
(Regions Covered)  
Saudi Arabia  
(Regions Covered)  
Taiwan  
NOTE: In countries designated with an asterisk(*), replacement product rental  
service are offered.  
NEC Solutions Asia Pacific Pte. Ltd  
Address:  
401 Commonwealth Drive, #07-02, Haw Par  
Technocentre, Singapore 149598  
+65 6 273 8333  
Telephone:  
Fax Line:  
+65 6 274 2226  
Email Address:  
WEB Address:  
[email protected]  
http://www.nec.com.sg/ap  
(Regions Covered)  
Singapore  
NEC Systems Integration Malaysia Sdn Bhd  
Address:  
Ground Floor, Menara TA One, 22, Jalan P. Ramlee,  
50250 Kuala Lumpur, Malaysia  
+6 03 2164 1199  
Telephone:  
Fax Line:  
+6 03 2160 3900  
Email Address:  
WEB Address:  
[email protected]  
http://www.necmalaysia.com.my  
(Regions Covered)  
Malaysia  
Nautilus Hyosung Inc.  
Address:  
7th Floor, Cheongdam Building, 52,  
Cheongdam-Dong,  
Kangnam-Ku, Seoul, Korea 135-100  
+82 2 510 0234  
+82 2 540 3584  
Telephone:  
Fax Line:  
Email Address:  
[email protected]  
(Regions Covered)  
South Korea  
E-67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P-1/  
,
Date:  
/
/
,
TO: NEC or NEC's Authorized Service Station:  
FM:  
(Company & Name with signature)  
Dear Sir (s),  
I would like to apply your TravelCare Service Program based on attached registration and qualification sheet and agree with your  
following conditions, and also the Service fee will be charged to my credit card account, if I don't return the Loan units within the  
specified period. I also confirm following information is correct. Regards.  
Application Sheet for TravelCare Service Program  
Country,  
product purchased :  
User's Company Name :  
User's Company Address :  
Phone No., Fax No. :  
User's Name :  
User's Address :  
Phone No., Fax No. :  
Local Contact office :  
Local Contact office Address :  
Phone No., Fax No. :  
User's Model Name :  
Date of Purchase :  
Serial No. on cabinet :  
Problem of units per User :  
Required Service :  
(1) Repair and Return  
(1) Credit Card  
(2) Loan unit  
Requested period of Loan unit :  
Payment method :  
(2) Travelers Cheque  
(3) Cash  
In Case of Credit Card :  
Card No. w/Valid Date :  
E-68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Loan Service Charges and Conditions:  
Upon acceptance of this NEC Projector, Customer agrees to assume  
liability for this loan unit.  
Condition of your TravelCare Service Program  
Enduser is requested to understand following condition of TravelCare  
Service Program and complete the necessary information on the appli-  
cation sheet.  
The current cost of use of this loan unit is $200.00 USD for 12 calendar  
days.  
1. Service Options:  
There are 3 types of "Service" available. Enduser has to understand  
following condition and is required to fill in the Application Sheet.  
If Customer does not return the unit within the 12 calendar days, Cus-  
tomer will be charged the next highest cost up to and including the full  
list price to Credit Cards, which price will be informed by NEC Autho-  
rized Service Stations. Please see the attached listing of contacts for  
each country to arrange for pickup of the loan unit.  
1) Repair and Return:  
The 'Faulty unit' is sent or collected from the customer. It is repaired  
and returned within 10 days to the customer, excluding transport time.  
If you return to their country of origin with the loan unit, you will be  
charged additional freight to return the unit to the loaning country.  
There may have a case, repair and return can't be done by NEC  
Authorized Service Station, because of shortage of spare parts due  
to same model is not sold in the territory.  
Thank you for your understanding of this program.  
2) Repair and Return with Loan: (This service is limited to some Ser-  
vice Stations)  
This service is offered to the Enduser, who cannot wait until their unit  
is repaired.  
The customer can borrow a unit for $200 up to 12 days. Customer  
then sends in inoperable unit to nearest NEC Authorized Service  
Station for service. In order to prevent collection problem, Enduser is  
required to fill in Application Sheet.  
Enduser needs to confirm the availability of the Service to NEC Au-  
thorized Service Stations.  
3) Loan Only:  
For this service, NEC Authorized Service Station supplies the cus-  
tomer with a loan unit for US$200 up to 12 days.Customer keeps the  
inoperable unit and when customer returns home, customer arranges  
to have the projector serviced in the home country.  
2. Warranty Exclusions:  
This program does not apply if the Projector's serial number has been  
defaced, modified or removed.  
If, in the judgement of NEC Authorized Service Station or its agent the  
defects or failures result from any cause other than fair wear and tear or  
NEC neglect, or fault including the following without limitation:  
1) Accidents, transportation, neglect, misuse, abuse, water, dust, smoke  
or default of or by the Customer its employees or agents or any third  
party;  
2) Failure or fluctuation of electrical power, electrical circuitry, air condi-  
tioning, humidity control or other environmental conditions such as  
use it in smoking area;  
3) Any fault in the attachments or associated products or components  
(whether or not supplied by NEC or its agents which do not form part  
of the Product covered by this warranty);  
4) Any act of God, fire, flood, war, act of violence or any similar occur-  
rence;  
5) Any attempt by any person other than any person authorized by NEC  
to adjust, modify, repair, install or service the product.  
6) Any Cross-border charges such as, duty, insurance, tax etc.  
3. Charges for Warranty Exclusions and Out of Warranty Case:  
In case faulty unit is under warranty exclusions case or under Out of  
Warranty period, NEC Authorized Service Station will Inform estimation  
of actual service cost to the Enduser with reason.  
4. Dead on Arrival (DOA):  
Enduser must take this issue up with their original supplier in the coun-  
try of purchase.  
NEC Authorized Service Station will repair the DOA unit as a Warranty  
repair, but will not exchange DOA unit with new units.  
E-69  
Download from Www.Somanuals.com. All Manuals Search And Download.  

MTD Vacuum Cleaner Series 020 User Manual
Multiquip Chainsaw SP706016 User Manual
Multiquip Landscape Lighting MB1000 User Manual
Multiquip Portable Generator LT6D User Manual
NEC Car Video System x461s User Manual
Nikon Camera Lens 105mm F 28 User Manual
NuTone Ventilation Hood sm6500 User Manual
Olympus MP3 Player BZ8182 03 User Manual
Oregon Scientific Radar Detector RA123 User Manual
Oster Griddle Electric Griddle with Warming Tray User Manual