Warnings
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING :
To reduce the risk of electric shock do not remove cover (or back).
No user serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the appliance.
WARNING :
To prevent fire or shock hazard, do not expose the set to rain or moisture. Do not rub
or strike the Active Matrix LCD with anything hard as this may scratch, mar, or
damage the Active Matrix LCD permanently.
The appliance is not intended for use by young children or infirm persons without
supervision.
Young children should be supervised to ensure that they do not play with the
appliance.
Model:NLT-17WF
CAUTION:
Do not attempt to modify this product in any way without written authorization.
Unauthorized modification could void the user’s authority to operate this product.
Owner’s Manual
Power
This set operates on a DC supply provided by the AC-DC adaptor, the voltage is as
indicated on the label on the back cover. Use only the AC-DC adaptor supplied with
the set and never apply an AC mains to the set directly. The AC-DC adaptor operates
on an AC mains supply, the voltage is as indicated on the label of the AC-DC
adaptor.
a. Connect the DC plug of the AC-DC adaptor to the 12V socket of the set.
b. Connect the AC-DC adaptor and its power cord.
c. Connect the power cord to an AC mains.
In the event of thunderstorms or power cuts, please pull out the mains plug of the
AC-DC adaptor and the aerial plug. Do not allow anything to rest upon or roll over the
power cord, and do not place the set where the power cord is subject to damage.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
Supplied Accessories
1. ON/OFF Switches TV set on or off.
2. MENU
Displays a menu.
L Make Sure the following accessories are provided with Product.
1. AC/DC adaptor
2. AC Cord
3. + PR - (Programme Up/Down)
Selects a programme or a menu item.
4. + VOL - (Volume Up/Down)
Adjusts the volume./ Adjusts menu settings.
5. TV/AV Selects TV, COMPONENT, VIDEO, S-VIDEO, RADIO(Only when the set is
Radio On.) or PC mode. / Clears the menu from the screen.
6. Power Indicator
Illuminates in red when the TV is in standby mode./ Illuminates in green when the
TV is switched on. Illuminates in amber and blinks when the power save mode
(only PC mode).
4. Batteries (type AAA)
3. Remote controller
7. Remote control sensor
Accepts the IR signal of remote controller.
MENU
I/II
TV/AV
LIST
SLEEP Q.VIEW
PSM
SSM
SIZE
PC/
ARC/
*
*
TEXT
HOLD
INDEX
MIX
UPDATE
TIME
REVEAL
1
2
3
4
5
6. PC IN cable
5. Owner’s manual
6
7
1
2
3
4
5
6
7
8
Model:NLT-17WF
Owner’s Manual
1. DC12V IN
2. PC/DTV INPUT
3. PC AUDIO IN
Connect the audio cable from the PC AUDIO IN of the set.
4. COMPONENT
5. HEADPHONE OUT
7. PC Audio IN cable
Connect a headphone to this socket.
6. S-VIDEO IN
Connect the output of an S -VIDEO VCR to the S-VIDEO input.
Connect the audio outputs of an S-VIDEO VCR to the AV-IN audio inputs.
7. A/V-IN
Connect the Audio/Video outputs of external equipment to these inputs.
8. ANT. (Antenna input)
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
Controls
All the functions can be controlled with the remote controller. Some functions can
also be adjusted with the buttons on the side panel of the set.
12. VOLÏq (Volume Up/Down)
Adjusts the sound level. Adjusts menu settings.
13. PC/
*
Remote controller
Selects the PC mode.
Before you use the remote controller, please install the batteries.
14. PSM (Picture Status Memory)
Recalls your preferred picture setting
1. POWER
Turns the TV on from standby or off to standby mode.
15. SSM (Sound Status Memory)
1
2
4
Recalls your preferred sound setting
2. MUTE
MENU
I/II
TV/AV
LIST
Turns the sound on and off.
16. ARC/
*
SLEEP Q.VIEW
You can watch TV in various picture formats; 16:9,
3. NUMBER buttons
3
5
14:9, 4:3, Auto, 16:9 Zoom, 14:9 Zoom, 4:3 Zoom.
Selects programme numbers.
Repeatedly press the ARC/ button to select your
*
desired picture format.
4. TV/AV
Note. 16:9 and 4:3 in PC mode are available.
Selects TV, COMPONENT, VIDEO, S-VIDEO,
RADIO(Only when the set is Radio On.), PC or DTV mode.
Clears the menu from the screen.
MENU
I/II
TV/AV
LIST
17. TELETEXT buttons
13
16
PSM
SSM
SIZE
PC/
ARC/
*
*
6
9
7
8
SLEEP Q.VIEW
These buttons are used for Teletext.
For further details, see the ‘Teletext’ section.
TEXT
HOLD
INDEX
MIX
5. MENU
15
17
UPDATE
TIME
REVEAL
Displays a main menu.
6. LIST
Battery installation
Displays the programme list menu.
uInserting batteries
PSM
SSM
SIZE
PC/
ARC/
*
*
1. Remove the battery cover by pulling it upward
in the direction shown by the arrow.
TEXT
HOLD
INDEX
MIX
7. I/II
Selects the language during dual language broadcast.
Selects the sound output.
2. Insert the batteries with correct polarity ( "+" to "+",
and "-" to "-" ).
3. Replace the battery compartment cover.
UPDATE
TIME
REVEAL
8. SLEEP
Sets the sleep timer.
→
→
9. Q.VIEW
Returns to the previously viewed programme.
10. PRxy (Programme Up/Down)
Selects next programme or a menu item.
* Install two high-quality 1.5V "AAA" alkaline batteries. Don't mix old batteries with
new batteries.
*Remove batteries when you won't use the remote controller for a long time. Liquid
leakage from old batteries may cause operation failure.
11. OK
Accepts your selection or displays the current mode.
uNotes for using remote controller
• Make sure there are no objects between the remote controller and its sensor.
• Don't place the remote control near a heater or in damp place. Strong impact to the
remote control may cause operation failure.
• Signal from the remote control may be disturbed by sun light or other bright light. In
this case, darken the room or move the TV.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
On Screen Menus and Displays
Equalizer
1. Press the MENU button to display main menu.
Turning the TV On and Off
Flat
Music
Movie
Speech
2. Press the PRxy button to select menus-Picture,
Standby Setup: The AC-DC adapter and the AC power cord
must be set up and connected to have the TV in standby mode
ready to be turned on. Press the ON/OFF button on the side
panel of the TV to go into standby mode.
Sound, Special, Setup.
3. Adjust each menu with the VOLÏq button.
4. Press the MENU button to return to preceding
menu.
5. Press the TV/AV button to finish adjusting menu.
User
0.1 0.5 1.5 5.0 10KHz
Exit : TV/AV
1. If the TV is in standby mode, press the POWER button
on the remote controller or the TV itself to turn the TV on.
2. Press the Power button again on the remote controller or
the ON/OFF button the TV itself to turn the TV off.
Position : ƇƉ
Back : MENU
Clock
Picture
MENU
Clock
--
--
--
:
--
--
--
Contrast
Brightness
Colour
90
75
75
60
Off Time
:
:
Off
Off
1
Picture
Sound
Special
Setup
Ș
Ș
Ș
Ș
Note : If the TV is on and the POWER button is pressed to turn
the TV off, the TV goes into standby mode.
MENU
I/II
TV/AV
LIST
On Time
On Programme
Sharpness
SLEEP Q.VIEW
Position : ƇƉ
Back : MENU
Adjust : ȖȘ
Exit : TV/AV
Programme selection
Position : ƇƉ
Back : MENU
Adjust : ȖȘ
Exit : TV/AV
Position : ƇƉ
Next : ȖȘ
Exit : TV/AV
You can select a Programme number with the PRxy button
or NUMBER buttons.
Auto Programme
PSM
SSM
SIZE
PC/
ARC/
*
*
System
Start
BG
Volume adjustment
Sound
TEXT
HOLD
INDEX
MIX
Press the VOLÏq button to adjust the sound level.
Equalizer
Balance
AVL
Surround
Sound Mode
Ș
0
Off
Off
MONO
UPDATE
TIME
REVEAL
Position : ƇƉ
Back : MENU
Adjust : ȖȘ
Exit : TV/AV
Quick view
Press the Q.VIEW button to view the last channel you were
watching.
Manual Programme
Position : ƇƉ
Back : MENU
Next : ȖȘ
Programme
Channel
Table
1
69
Exit : TV/AV
MENU
TV/AV
LIST
V/UHF
BG
Sound mute function
System
Search
ȘȘȘ
Press the MUTE( ) button. The sound is switched off and the
SLEEP Q.VIEW
Memorize
I/II
Name
-----
mute display
appears.
Special
Position : ƇƉ
Back : MENU
Adjust : ȖȘ
Exit : TV/AV
To cancel mute mode, press the MUTE( ) button again,
VOLÏq or SSM button.
Clock
Ș
Off
Off
Off
Off
Blue Back
Auto Sleep
Childlock
Radio
Programme Edit
P00
P01
P02
P03
P04
-----
-----
-----
-----
-----
P05
-----
-----
-----
-----
-----
P06
P07
P08
P09
PSM
SSM
SIZE
PC/
ARC/
*
*
On screen menu language selection
The menu can be displayed on the screen in desired
language. First, select your language.
1. Press the MENU button.
ARC
16:9
Language
TEXT
HOLD
INDEX
MIX
Position : ƇƉ
Back : MENU
Next : ȖȘ
Exit : TV/AV
English
Deutsch
Français
Español
Italiano
ƅDelete
ƅMove
ƅName
ƅSkip
UPDATE
TIME
REVEAL
2. Select the Setup menu, then press VOLÏqbutton.
3. Select the Language menu, then press
VOLÏqbutton.
4. Press the PRxy button to select your desired
language.
5. Press the TV/AV button.
All the on screen displays will appear in the selected
language.
Position : ƇƉꢀȖȘ
Back : MENU
Exit : TV/AV
Setup
Language
Position : ƇƉ
Back : MENU
Exit :TV/AV
English
Deutsch
Français
Español
Italiano
Auto Programme
Manual Programme
Programme Edit
Language
Ș
Ș
Ș
Ș
Position : ƇƉ
Back : MENU
Next : ȖȘ
Exit : TV/AV
Position : ƇƉ
Back : MENU
Exit : TV/AV
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up TV Programme
Setting up TV Programme
Once you have preset the programmes, you will be able to
use the PRxy or NUMBER buttons to scan the
programmes you programmed.
Programmes can be tuned using automatic or manual
modes.
Manual Programme
Manual Programme
Auto Programme
Manual Programme lets you manually tune and arrange
the programmes in whatever order you desire. Also you
can assign a programme name with 5 characters to each
programme number.
Programme
Channel
Table
1
69
V/UHF
BG
System
Start
BG
System
Search
ȘȘȘ
Memorize
1. Press the MENU button.
Auto Programme
Name
-----
2. Select the Setup menu, then press VOLÏqbutton.
3. Select Manual Programme menu, then press
VOLÏqbutton.
All programmes that can be received are stored by this
method. It is recommended that you use Auto programme
during installation of this set.
Position : ƇƉ
Back :MENU
Adjust : ȖȘ
Exit : TV/AV
Position : ƇƉ
Back : MENU
Adjust : ȖȘ
Exit : TV/AV
4. Select a programme with the VOLÏq button or
number buttons.
5. Press the PRxy button to select Channel menu.
6. Press the VOLÏq button or directly number buttons
to select a Channel.
7. Press the PRxy button to select the Table menu.
8. Press the VOLÏq button to select V/UHF or Cable
as required.
1. Press the MENU button.
2. Select the Setup menu, then press VOLÏqbutton.
3. Select the Auto Programme menu, then press
VOLÏqbutton.
4. Press the PRxy button to select System.
5. Select a TV system with the VOLÏq button;
BG : (Germany/Asia/M.East/Africa/Australia)
9. Select a TV system with the VOLÏq button.
BG : (Germany/Asia/M.East/Africa/Australia)
I
: (UK/Hong Kong/South Africa)
DK : (CIS/China/East Europe)
: (USA/Korea/Philippines)
I
: (UK/Hong Kong/South Africa)
DK : (CIS/China/East Europe)
: (USA/Korea/Philippines)
10. Press the PRxy button to select Search menu.
M
MENU
I/II
TV/AV
6. Select Start, then press VOLÏqbutton
start Auto Programme.
7. Press the MENU button to stop Auto programme
8. Press the TV/AV button to return to normal TV
viewing.
M
MENU
TV/AV
LIST
SLEEP Q.VIEW
LIST
When you press the VOLÏq buttons, the TV changes
programmes in sequence.
You will see all the programmes that the TV has
memorized. You will not see programmes that were
either erased or not memorized.
SLEEP Q.VIEW
I/II
11. Press the PRxy button to select Memorize menu.
12. Press the VOLÏq button to store it.
13. Press the MENU button to return to prior menu.
14. Press the TV/AV button to return to normal TV
viewing.
PSM
SSM
SIZE
PC/
ARC/
*
*
PSM
SSM
SIZE
PC/
ARC/
*
*
TEXT
HOLD
INDEX
MIX
TEXT
HOLD
INDEX
MIX
UPDATE
TIME
REVEAL
UPDATE
TIME
REVEAL
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up TV Programme
Picture Control
You can adjust picture Contrast, Brightness, Colour, Sharpness and Tint(only in
Programme Edit
Programme Edit
NTSC mode) to the levels you prefer.
This function enables you to delete or skip the stored
programmes.
P00
P01
P02
P03
P04
-----
-----
-----
-----
-----
P05
P06
P07
P08
P09
-----
-----
-----
-----
-----
Picture
Manual Picture Control
Also you can move some programmes to other
programme numbers or insert a blank programme data into
the selected programme number.
Contrast
Brightness
Colour
90
75
75
60
1. Press the MENU button.
2. Select the Picture menu, then press VOLÏqbutton.
3. Press the PRxy button select a picture item.
4. Press the VOLÏq button to adjust the picture
condition as you want.
ƅDelete
ƅMove
ƅName
ƅSkip
1. Press the MENU button.
Sharpness
2. Select the Setup menu, then press VOLÏqbutton.
3. Press the PRxy button select Programme Edit menu,
then press VOLÏqbutton.
Position : ƇƉꢀȖȘ
Back : MENU
Exit : TV/AV
5. Press the TV/AV button to store for the picture User.
(*TINT menu only appears at NTSC signal)
Position : ƇƉ
Back : MENU
Adjust :ȖȘ
Exit : TV/AV
4. Select the programme name to edit with the PRxy and VOLÏq button.
Deleting a programme
1. Select a programme to be deleted with the PRxy or VOLÏq button.
Selected Item
Contrast
Setting Change
2. Press the RED button once. The selected programme is deleted, all the
following programme is shifted up one position.
More darkness VOLÏ 0~100 qVOL More light
Less bright VOLÏ 0~100 qVOL More bright
Lower color intensity VOLÏ 0~100 qVOL Higher color intensity
Soft picture VOLÏ 0~100 qVOL Sharp picture
Naming a programme
1. Select a programme to be named with the PRxy or VOLÏq button.
2. Press the GREEN button. Then it display as below.
Brightness
Colour
Edit Name
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀƇ
Station
P01
-----
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀƉ
Sharpness
MENU
TV/AV
LIST
Adjust : ƇƉꢀȖȘ
Back : MENU
Confirm: OK
Exit :TV/AV
SLEEP Q.VIEW
I/II
Auto Picture Control
3. Press the PRxy button repeatedly to edit programme name.
You can use the numeric 0 to 9, the alphabet A to z(capital
and small letters.) a blank and -. With the VOLÏq button,
you can select in the opposite direction.
MENU
I/II
TV/AV
LIST
*The Picture options - Dynamic, Standard, Mild and Game
are programmed for good picture reproduction
at the factory and cannot be changed.
SLEEP Q.VIEW
4. Press the OK button to store it.
5. Press the MENU button to return to prior menu.
6. Press the TV/AV button to return to normal TV viewing.
PSM (Picture Status Memory)
1. Press the PSM button.
2. Press the PSM button repeatedly to select [PSM].
Each press of the button changes the screen display as
below.
PSM
SSM
SIZE
PC/
ARC/
*
*
TEXT
HOLD
INDEX
MIX
Moving a programme
UPDATE
TIME
REVEAL
PSM
SSM
SIZE
PC/
ARC/
*
*
1. Select a programme to be moved with the PRxy or
VOLÏq button.
2. Press the YELLOW button.
3. Move the programme to desired programme number with
the PRxy or VOLÏq button.
4. Press the YELLOW button again to release this function.
TEXT
HOLD
INDEX
MIX
Dynamic
؋ Standard ؋ Mild ؋ Game ؋ User UPDATE
TIME
REVEAL
Skipping a programme number
• Dynamic : Vivid Picture Appearance
• Standard : Standard Picture Appearance
• Mild : Softer Picture Appearance
• Game : External Video Game Picture Setup
• User : Manual Picture Setup
1. Select a programme number to be skipped with the PRxy
or VOLÏq button.
2. Press the CYAN button. The skipped programme turns to blue.
3. Press the CYAN button again to release the skipped programme.
Note: When a programme number is skipped it means that you will be unable to
Note. In PC mode, PSM function isn’t available.
select it using the PRxy button during normal TV viewing. If you want to
select the skipped programme, directly enter the programme number with the
NUMBER buttons or select it in the Programme Edit.
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Control
Sound Control
You can select your preferred sound setting; Flat, Music,
Movie or Speech. You can also adjust the sound
frequency of equalizer, balance. If you switch AVL to on,
the set automatically keeps on an equal volume level even
if you change programmes.
Auto Sound Control
Sound
* The sound Flat, Music, Movie and Speech are
programmed for good sound reproduction at the factory
and cannot be changed.
Equalizer
Balance
AVL
Surround
Sound Mode
Ș
0
Off
Off
MONO
1. Press the MENU button.
SSM (Sound Status Memory)
1. Press the SSM button.
2. Press the SSM button repeatedly to select.
Each press of the button changes the screen display
as below.
2. Select the Sound menu, then press VOLÏqbutton.
3. Press the PRxy button to select the desired
sound item; Equalizer, Balance, AVL, Surround or
Sound Mode.
Position : ƇƉ
Back : MENU
Next : ȖȘ
Exit : TV/AV
4. Press the VOLÏq button to make desired
adjustment.
5. Press the VOLÏq button in Equalizer to set the
Equalizer.
MENU
I/II
TV/AV
LIST
Flat
؋ Music ؋ Movie ؋ Speech ؋ User SLEEP Q.VIEW
Equalizer
• Choose Flat for the standard factory settings.
• Choose Music when watching music video or
concerts.
Flat
Music
Movie
Speech
• Choose Movie when watching movies.
PSM
SSM
SIZE
PC/
ARC/
*
*
User
• Choose Speech when watching a show that is
0.1 0.5 1.5 5.0 10KHz
TEXT
HOLD
INDEX
MIX
MENU
TV/AV
LIST
mostly dialogue.
UPDATE
TIME
REVEAL
Position : ƇƉ
Back : MENU
• Choose User to recall your personalized settings.
Exit : TV/AV
SLEEP Q.VIEW
I/II
6. Press the PRxy button to select your preferred
setting ; Flat, Music, Movie, Speech or User.
To set the Equalizer User.
a. Select User by pressing the PRxy button.
b. Select a sound band by pressing the VOLÏq
button.
c. Make appropriate sound level with the PRxy
button.
d. Press the MENU button to return to preceding
menu.
PSM
SSM
SIZE
PC/
ARC/
*
*
TEXT
HOLD
INDEX
MIX
UPDATE
TIME
REVEAL
7. Press the PRxy button to the Balance menu.
8. Select the Balance menu with the VOLÏq button
and adjust the balance of speaker.
9. Select the AVL(Automatic Volume Leveler) menu
ON or OFF.
10.Select the Surround menu On or Off.
11.Select the Sound Mode menu.
If the sound quality is poor while you are watching a programme broadcast in
Stereo, select MONO with the VOLÏq button. Press the VOLÏq button to
switch between MONO and STEREO.(Please note that it works only when the
broadcast is done in stereo).
If a programme is received in two language(dual language), you can switch to
DUALм or DUALн by pressing the VOLÏq button repeatedly.
DUALм sends the primary broadcast language to the loudspeakers.
DUALн sends the secondary broadcast language to the loudspeakers.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Other functions
Other functions
You can control other functions; Clock, Blue Back, Auto
Auto Sleep
Special
Sleep, Childlock, Radio, ARC and SLEEP TIMER menu.
If you select Auto Sleep On the set will automatically switch
itself to standby mode approximately ten minutes after a TV
Channel stops broadcasting.
Clock
Ș
Off
Off
Off
Off
Blue Back
Auto Sleep
Childlock
Radio
Clock
1. Press the MENU button.
Setting the clock is necessary in order to use the various
timer features of the TV. You can set automatic TV On or
Off time.
2. Select the Special menu, then press VOLÏqbutton.
3. Press the PRxy button to select Auto Sleep.
4. Press the VOLÏq button to select On.
ARC
16:9
1. Press the MENU button.
5. Press the TV/AV button to return to normal TV viewing.
Note. If the set connects with the external input source in
the middle of a lapse of 10 minutes after a TV channel stops
broadcasting, Auto Sleep function is automatically canceled.
Position : ƇƉ
Back : MENU
Next : ȖȘ
Exit : TV/AV
2. Press the PRxy button to select the Special menu.
Then press the VOLÏq button.
MENU
I/II
TV/AV
LIST
3. Press the VOLÏq button to select Clock menu.
SLEEP Q.VIEW
Clock
Childlock
Clock
--
--
--
:
--
--
--
Childlock menu is necessary in order to disable the buttons
on the side panel of the set. Especially it is useful to prevent
unauthorized viewing.
Off Time
:
Off
Off
1
On Time
:
On Programme
1. Press the PRxy button to select Childlock.
2. Press the VOLÏq button repeatedly to select On or Off.
PSM
SSM
SIZE
PC/
ARC/
*
*
Position : ƇƉ
Back : MENU
Adjust : ȖȘ
Exit :TV/AV
* When the setting is Childlock On, the buttons on the side
panel of the set is disabled, except ON/OFF button.
* When the setting is Childlock Off, the buttons on the side
panel of the set is enabled.
TEXT
HOLD
INDEX
MIX
4. Setting the clock
UPDATE
TIME
REVEAL
Press VOLÏq, to select hour & minutes. Press PRxy to
MENU
TV/AV
select the number between 00:00 …23:59) (Hours:Minutes)
After setting the time, press VOLÏquntil the red letters
disappear.
SLEEP Q.VIEW
Radio
I/II
LIST
You can listen to radio with the set.
1. Press the MENU button.
5. OFF time
Select the OFF time by pressing PRxy. Press VOLÏq, to
select hour/minutes. Press PRxy to select the number
between 00:00 …23:59) (Hours:Minutes).
Select ON/OFF, to turn the OFF TIME On/Off
After setting the OFF time, press VOLÏq until the red
letters disappear..
2. Press the PRxy button to select the Special menu.
Then press the VOLÏq button.
3. Press the PRxy button to select Radio.
4. Press the VOLÏq button to select Radio On or Off.
PSM
SSM
SIZE
PC/
ARC/
*
*
Note. When the setting is On, you can adjust radio function in radio mode. (see page 20)
6. ON TIME
TEXT
HOLD
INDEX
MIX
ARC (Aspect Ratio Control)
Select the ON time by pressing PRxy. Press VOLÏq, to
select hour & minutes. Press PRxy to select the number
between 00:00 …23:59) (Hours:Minutes) .
Select ON/OFF, to turn the ON TIME On/Off
After setting the ON time, press VOLÏq until the red letters
disappear.
You can watch TV in various picture formats; 16:9, 14:9, 4:3, Auto, 16:9 Zoom, 14:9
Zoom, 4:3 Zoom.
Repeatedly press the ARC/ button to select your desired picture format.
UPDATE
TIME
REVEAL
*
16:9 You can enjoy the cinema or general TV programme through the 16:9 mode.
The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and
right so that the screen 16:9 is full.
14:9 You can enjoy the picture format of 14:9 or general TV programme through the 14:9 mode.
The screen 14:9 is viewed just like that the screen 4:3 is magnified to the upper/lower
and left/right.
7. ON Programme
Select the ON Programme by pressing PRxy. Press
VOLÏq to change the programme number. This programme
number will be the first programme displayed after setting
the ON TIME.
4:3 This picture format is 4 to 3 of general TV.
Auto When your set receives the wide screen signal, it will be automatically changed to
8.Press the TV/AV button to return to normal TV viewing.
the picture format to be sent.
Note. The present time must be set for using the Clock function.
16:9 Zoom Magnifies the size of the picture on screen 16:9.
14:9 Zoom Magnifies the size of the picture on screen 14:9.
4:3 Zoom Magnifies the size of the picture on screen 4:3.
Note. In Zoom mode, you can adjust the position of the picture with PRxy button.
(It’s possible when the ARC information is displayed on screen.)
Blue Back
If no signal is being received or the signal is very weak, a blue screen automatically
replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must select the Blue Back
On.(Pressing the VOLÏq button will alternate between “On” and “Off”.)
SLEEP TIMER
Set the timer for the TV to turn off at the preset time automatically.
Press the SLEEP button on the remote control.
The number on the screen changes from
0-> 15->30->60->0
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Control
TELETEXT
This function is possible only when the set is in Radio mode.(Radio mode is displayed
TEXT On/Off
when the Setting for special menu is radio On.)
1. Press TEXT button once, displays the Teletext pages.
If you press the TEXT button twice, the teletext pages
and the TV picture are concurrently displayed on both
sides of the screen.
Radio Setup
Mode
Auto
87.50 MHz
1
1. Use TV/AV button on remote controller to select
Radio mode.
2. Press the MENU button to set Radio Setup menu.
3. Press the VOLÏq button repeatedly to select
Mode Auto or Manual.
* When the Radio Setup Mode is Auto, only the
programmes stored in memory are selected.
* When the Radio Setup Mode is Manual, all frequencies
are selected.
Frequency
Programme
5MUWZQbM
Delete
Auto Programme
7NNꢀ<QUMꢀ
Edit Name
2. Press MIX button once more, displays the Teletext
pages superimposed on the TV picture.
3. Press the TEXT button to switch off Teletext once
more, Text mode is off, and TV mode appears.
Ș
7NN
Ș
6IUMꢀ
ꢁꢁꢁꢁꢁꢁꢁꢁ
Position : ƇƉ
Adjust : ȖȘ
Exit : TV/AV
MENU
I/II
TV/AV
LIST
If you press the PR button to select programme
4. Press the PRxy button select Frequency.
Then press the VOLÏq button repeatedly to tune in the
desired station manually. If you press the VOLÏq button
continually above 2 seconds, It automatically changes
present frequency into next frequency.
5. Press the PRxy button to select Programme.
Then press the VOLÏq button repeatedly to select
programme.
TOP text
SLEEP Q.VIEW
The user guide displays four fields-red, green, yellow and
blue at the bottom of the screen. The yellow field denotes
the next group and the blue field indicates the next block.
Group/block/page selection
1. With the BLUE button you can progress from block to
block.
PSM
SSM
SIZE
PC/
ARC/
*
*
TEXT
HOLD
INDEX
MIX
2. Use the YELLOW button to proceed to the next
group with automatic overflow to the next block.
3. With the GREEN button you can proceed to the next
existing page with automatic overflow to the next
group. Alternatively the PRx button can be used.
4. The RED button permits to return to previous
selection. Alternatively the PRy button can be used.
6. Press the PRxy button to select memorize. If you want
to memorize this radio setup, press the VOLÏq button.
7. Press the PRxy button to select Delete. Select Off
with the VOLÏq button to delete the station.
8. Press the PRxy button to
MENU
TV/AV
LIST
UPDATE
TIME
REVEAL
SLEEP Q.VIEW
I/II
Radio Auto Programme
select Auto Programme.
9. Press the VOLÏq button
Start
repeatedly to automatically
scans and tunes to the next
available station.
PSM
SSM
SIZE
PC/
ARC/
*
*
Start : ȖȘ
FLOF text
10. Press the PRxy button to
Back : MENU
Exit : TV/AV
TEXT
HOLD
INDEX
MIX
The Teletext pages are colour coded along the bottom of
the screen and are selected by pressing the corresponding
coloured button.
select Off Time.
UPDATE
TIME
REVEAL
Then press the VOLÏq
button repeatedly to select
Off, 5, 10, 30(minutes).
11. Press the PRxy button to
select Edit Name.
Radio Name Edit
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀƇ
Station
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀƉ
P01 -------
Page selection
1. Press the INDEX button to select the index page.
2. You can select the pages, which are colour coded
along the bottom line with the same coloured buttons.
3. The PRxy button can be used to select the
preceding or following page.
Adjust : ƇƉ ȖȘ
Back : MENU
Confirm : OK
Exit : TV/AV
Then press the VOLÏq
button to edit radio name.
12. You can assign a radio name with 8 characters.
Press the PRxy button repeatedly. You can use the
numeric 0 to 9, the alphabet A to z(capital and small letters.) and a blank.
With the VOLÏq button, you can select in the opposite direction.
13. Press the MENU button to return to prior menu.
14. Press the TV/AV button to exit. Then the radio setting
condition is displayed.
Note. If you want to listen to the radio in the PC mode, the ANT. Jack must be
connected to the antenna input of the set.
OFF time in the radio means the LCD back light will be OFF, but the radio will
still be running.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
TELETEXT
External Equipment Connection
You can connect additional equipment, such as VCRs, camcorders etc. to your set.
Examples are shown below When connecting to other equipment, please ensure you
turn the main switch OFF to prevent any damage to the equipment.
Special TELETEXT functions
MENU
Functions
Antenna connection
1. Connect RF out on the VCR to the
Antenna input on the rear of the TV.
2. Connect the antenna cable to the antenna
in jack on the VCR.
Changes Teletext mode
TEXT
Selects double height text.
Press this button to enlarge the top half of the page.
Press this button again to enlarge the bottom half of
the page.
SIZE
3. Press the TV/AV button to select Antenna
Input source.
4. Press the PLAY button on the VCR.
Press this button again to return to the normal display.
VCR
Stops the automatic page change, which will occur if a
Teletext page consists of 2 or more sub pages. The
number of sub pages and the sub page displayed is,
usually, shown on the screen below the time. When
this button is pressed the stop symbol is displayed at
the top left-hand corner of the screen and the
automatic page change is inhibited. To continue press
this button again.
HOLD
COMPONENT
COMPONENT inputs jack
1. Connect the COMPONENT video output sockets
(Y Cb Cr) of the COMPONENT to the
COMPONENT INPUT sockets of the set.
2. Connect the audio cable from the COMPONENT
to the COMPONENT INPUT sockets of the set.
3. Press the TV/AV button to select COMPONENT
mode.
Return to index page
INDEX
Displays the TV picture on the screen while waiting for
the new Teletext page. The display will appear at the
top left hand corner of the screen. When the updated
page is available then display will change to the page
number.
4. Press the PLAY button on the DVD.
The COMPONENT playback picture appears on the screen.
UPDATE
Press this button to view the updated Teletext page.
When viewing a TV programme, press this button to
display the time at the top right hand corner of the
screen. Press this button again to remove the display.
The time will only be displayed at the channel that
broadcast the teletext.
In Teletext mode press this button to select and hold
or change a four-digit sub page number. This is
displayed along the bottom of the screen. Press this
button again to exit this function.
DTV INPUT
1. Connect the DTV video output
TIME
sockets of the DTV set top
box to the COMPONENT Input
sockets of the set.
2. Connect the audio cable from the DTV set
top box to the Audio Input sockets of the set.
3. Press the TV/AV button to select DTV mode.
Note : When receiving 576P, 480P signals, it advises you to watch it in DTV mode. If
you watch it in component mode, the unit displays split picture.”
Press this button to display the concealed information,
such as solutions of riddles or puzzles.
Press this button again to remove the information from
the display.
REVEAL
MIX
Only Teletext mode, text mode superimposed on the
TV picture, TV mode
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
External Equipment Connection
Connecting PC as monitor
When connecting to other equipment, please ensure you turn the main switch OFF to
prevent any damage to the equipment.
PC/DTV INPUT
1. Connect the PC IN cable D-sub jack
from the monitor output socket of the
PC to the PC/DTV input socket of the set.
2. Connect the PC Audio IN cable from the
PC to the PC AUDIO IN of the set.
3. Press the TV/AV or PC button to select PC mode.
4. Switch on the PC, and the PC screen appears on the set.
A/V INPUT
1. Connect the A/V out jacks on a VCR to A/V-IN
AV-IN
VIDEO L(MONO)
jacks on the TV.
2. Use the TV/AV button to select VIDEO mode.
3. Press the PLAY button on the VCR.
COMPONENT
R
The VCR playback picture appears on the TV screen.
Note : If you have a mono VCR, connect the audio cable
from the VCR to the L(MONO) socket of the set.
The set can be operated as the PC monitor.
Resolution
VCR
Horizontal
Vertical
Mode
Resolution
frequency(KHz)
frequency(Hz)
640 x 480
640 x 480
720 x 400
37.9 KHz
37.5 KHz
31.4 KHz
72 Hz
75 Hz
70 Hz
S-VIDEO INPUT
If using an S-VIDEO source, the picture quality will be
improved over a video source.
VGA
1. Connect the S-VIDEO output of a VCR to the
S-VIDEO input on the TV.
2. Connect the audio cables from the S-VIDEO
VCR to the L (MONO), R inputs on the TV.
3. Select S-VIDEO mode by pressing the TV/AV
button repeatedly.
800 x 600
800 x 600
800 x 600
800 x 600
35.1 KHz
37.9 KHz
48.1 KHz
46.9 KHz
56 Hz
60 Hz
72 Hz
75 Hz
A/V-IN
L(MONO)
R
COMPONENT
S-VIDEO
SVGA
S-VIDEO VCR
4. Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
1024 x 768
1024 x 768
1024 x 768
48.4 KHz
56.5 KHz
60.0 KHz
60 Hz
70 Hz
75 Hz
XGA
Headphone jack
Insert the headphone plug to the headphone jack on the TV. You can listen to the
sound through the headphone; no sound from the speaker on the TV. To adjust the
headphone volume, press the VOLÏq button. If you press the MUTE( )button, the
sound from the headphone is turned off.
1280 x 768
1280 x 768
1280 x 768
47.4 KHz
47.8 KHz
60.3 KHz
60Hz RB
60 Hz
WXGA
75 Hz
720 x 480p
720 x 576p
31.5 KHz
31.2 KHz
45.0 KHz
37.5 KHz
33.7 KHz
28.1 KHz
60 Hz
50 Hz
60 Hz
50 Hz
60 Hz
50 Hz
Headphone
1280 x 720p
1280 x 720p
1920 x 1080i
1920 x 1080i
DTV
Note:
a. If the set is cold, there may be a small “flicker” when the set is switched on.
This is normal, there is nothing wrong with the set.
b. Some dot defects may appear on the screen, like Red, Green or Blue spots.
However, this will have no impact or effect on the monitor performance.
c. The resolution which is not supported will appear at the resolution which gets near
to the resolution which is supported
d. When resolutions are displayed that are not native to the panel resolution, text may
appear choppy or lines may appear to be bold or thicker than others. To minimise,
choose a resolution similar to the panel
24
25
* The standard of the resolution which gets near : H/V sync.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting PC as monitor
Connecting PC as monitor
Sound adjustment
Position Adjustment
Sound
H/V Position
1. Press the MENU button.
This function is to adjust picture to left/right and up/down
as you prefer.
Equalizer
2. Select the Sound menu, then press VOLÏq.
Balance
Ș
0
Off
Off
L+R
PC
H-Position
V-Position
0
0
3. Press the PRxy button to select the desired
AVL
sound item; Equalizer, Balance, AVL, Surround or
Sound Mode.
Surround
Sound Mode
Input
1. Press the MENU button.
2. Select the H/V Position menu.
3. Press the PRxy button to select the desired
position item.
Position : ƇƉ
Back : MENU
Adjust : ȖȘ
Exit : TV/AV
4. Press the VOLÏq button to make desired adjustment.
5. Press the VOLÏq button in Equalizer to set the
Equalizer.
6. Press the PRxy button to select your preferred
setting ; Flat, Music, Movie, Speech or User.
To set the Equalizer User.
Position : ƇƉ
Back : MENU
Next : ȖȘ
Exit : TV/AV
4. Press the VOLÏq button to adjust horizontal
position and vertical position.
5. Press the TV/AV button to exit menu
Equalizer
a. Select User by pressing the PRxy button.
b. Select a sound band by pressing the VOLÏq
button.
c. Make appropriate sound level with the PRxy
button.
d. Press the MENU button to return to preceding
menu.
Auto
Flat
This function is for the automatic adjustment of the screen position, clock and
clock phase. The displayed image will disappear for a few seconds while the
Auto-configuration is in process.
Music
Movie
Speech
User
0.1 0.5 1.5 5.0 10KHz
Exit : TV/AV
Note: Some signal from some graphics boards may not function properly.
If the results are unsatisfactory, adjust your monitor’s position, clock and clock
phase manually.
Position : ƇƉ
Back : MENU
7. Press the PRxy button to the Balance menu.
8. Select the Balance menu with the VOLÏq button and
adjust the balance of speaker.
9. Select the AVL(Automatic Volume Leveler) menu
ON or OFF.
10. Select the Surround menu ON or OFF.
11. Select the Sound Mode with PRxy button.
12. Press the VOLÏq button to select sound mode – L+R, L+L, R+R.
Reset
This function allows you to return to the good picture reproduction programmed
at the factory and cannot be changed.
L+R : Audio signal from audio L input is sent to left loudspeaker and audio signal
from audio R input is sent to right loudspeaker.
L+L : Audio signal from audio L input is sent to left and right loudspeakers.
R+R : Audio signal from audio R input is sent to left and right loudspeakers.
13. Select the Input with PRxy button.
14. Press the VOLÏq button to select Input – PC, Radio.
Note:
a. When selecting radio mode, sound mode alternates between MONO and
STEREO according to the received signal.
b. In PC mode, radio mode supports only Auto.
c. In PC mode, radio control function is on an equality with Radio function in
the front.(See page 20)
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting PC as monitor
Product Specifications
This function is possible only when the set is in PC mode.
Use the TV/AV button on remote controller.
MENU
Model
NLT-17WF
Picture
Ș
Ș
Ș
Sound
H/V Position
Auto
Reset
Picture adjustment
Horizontal size 520(520) mm Thickness
60(180) mm
4.85(6.2) kg
You can adjust picture Contrast, Brightness,
Main body
(With stand)
Temperature, Clock, Phase and ARC as you prefer.
Height
320(365) mm Weight
1. Press the TV/AV button to select the PC mode.
1280 x 768 60Hz
2. Press the MENU button.
3. Select the Picture.
Power requirements
Television system
Television programme
LCD Panel
DC 12V/5.0A
Position : ƇƉ
Next : ȖȘ
Exit : TV/AV
4. Press the PRxy button to select the desired
picture item.
PAL-BG, I, DK / SECAM-BG, DK / NTSC-M
VHF: 0~12 UHF :21~69 Cable : S1~S41
17.1" WIDE TFT LCD panel
WXGA(1280 X 768)
5. Press the VOLÏq button to make appropriate
adjustments.
6. Press the TV/AV button to exit menu.
Picture
Contrast
Brightness
Temperature
Clock
Phase
ARC
60
80
6500K
50
34
16:9
Contrast
This function is to adjust picture to light/dark.
Resolution
Brightness
Position : ƇƉ
Back : MENU
Adjust : ȖȘ
Exit : TV/AV
Power consumption
Stand by Power consumption
50W
This function is to adjust brightness of picture.
Temperature
Temperature is a measure of the warmth of the image
color.
Below 3W
External antenna impedance 75Ω
Clock
This function is to minimize any vertical bars or stripes
visible on the screen background. And the horizontal
screen size will also change.
Audio output
2W + 2W
• ANTENNA IN (TV/RADIO) • DC 12V IN
External input ports
Note : This mediation range is different according to
the supported resolution.
• PC/DTV IN
• COMPONENT IN
• COMPONENT audio IN
• AV IN
Phase
• HEADPHONE OUT
• S-VIDEO IN
This function allows you to remove any horizontal
noise and clear or sharpen the image of characters.
MENU
I/II
TV/AV
• PC AUDIO IN
SLEEP Q.VIEW
ARC (Aspect Ratio Control)
Selects a screen mode.-4:3 or 16:9
LIST
100-240Va.c. 50/60Hz
Output : 12Vd.c., 5.0A
* 4:3 mode : Sets the picture to 4:3 normal mode.
* 16:9 mode : Sets the picture to 16:9 wide mode.
AC/DC Power Adaptor
Note. a. Although LCD panel uses highly precise technology, it may display blank
pixels, dark spots, or lightning pixels on the screen. This is normal and not
an indication of a defect
PSM
SSM
SIZE
PC/
ARC/
*
*
TEXT
HOLD
INDEX
MIX
b. Technical specifications are subject to change without notice
UPDATE
TIME
REVEAL
4 : 3
16 : 9
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
NEC Australia Pty. Ltd.
ABN 86 001 217 527
Home Electronics Group
Problem
Check item
• Insert the AC power cord plug securely in AC power
outlet.
• Make sure the remote control is not in the standby
mode (The POWER/Standby indicator is red.)
No picture on screen and no sound
from speakers
NEC Service Centres
• Check the brightness setting of the display.
• Lamp may have malfunction.
No picture/No picture from AV
terminal
New South Wales
Sydney
184 Milperra Rd, Revesby 2212
131-632
131-632
• Check the sound setting.
Newcastle 120 Parry Street, Newcastle West 2302
• Make sure the sound is not muted.
• Make sure a pair of headphones is not connected.
• Make sure the connectors of the optional speaker
system are securely inserted.
Picture is displayed, but no sound
from the speakers.
Victoria
Melbourne Unit1/6, Garden Road, Clayton, 3168
131-632
• Make sure COLOR and CONTRAST settings.
Picture is too light
Picture is too dark.
• Make sure BRIGHTNESS setting is not set too low.
• Lamp may have malfunction.
Queensland
Brisbane
Unit 4/305 Montague Road, West End, 4101
131-632
131-632
• Change the batteries.
• Make sure the infrared transmitter window is not
receiving strong light such as light from fluorescent
lamps.
Southport Shop 1, 48 Ferry Road, Southport 4215
Remote control does not work.
South Adelaide
•The reception may be weak.
• The state of the broadcast may also be bad.
• Make sure the antenna is facing the right direction.
• Make sure the outside antenna is not disconnected.
The picture is not sharp.
The picture moves.
Adelaide
84A Richmond Rd, Keswick, 5053
131-632
• Make sure the antenna is facing the right direction.
• There may be reflected electric waves from
mountains or buildings.
Western Australia
Perth 45 Sarich Court, Osbome Park 6017
The picture is doubled or tripled.
The picture is spotted.
131-632
• There may be interference from automobiles, trains,
high voltage lines, neon lights, etc.
• There may be interference between the antenna cable
and power cable. Try positioning them further apart.
For Service in outer areas, please contact your NEC retailer for the
address of the nearest Authorised NEC Service Centre
• Is the unit receiving interference from other devices?
Transmission antennas of radio broadcasting stations
and transmission antennas of amateur radios and
cellular phones may also cause interference.
• Use the unit as far apart as possible from devices
that may cause possible interference.
There are stripes on the screen or
colors fade.
NEC Australia Pty. Ltd.
Home Electronics Group
244 Beecroft Road EPPING 2121
Tel:131-632
Fax:(02) 9877 2353
30
31
Download from Www.Somanuals.com. All Manuals Search And Download.
500-028Z041028
Download from Www.Somanuals.com. All Manuals Search And Download.
|