NAD DVD Player T524 User Manual

®
T524  
DVD / CD / MP3 Player  
Owners Manual  
Manuel de l'utilisateur  
Bedienungsanleitung  
Gebruikershandleiding  
Manual del Usuario  
Manuale delle Istruzioni  
Manual do Proprietário  
Bruksanvisning  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
TABLE OF CONTENTS  
INTRODUCTION  
OPERATION  
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Symbol used in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
About the ( ) Symbol Display . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Types of Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
Disc-related terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Front Panel and Display Window . . . . . . . . . . . . . . . . . . . . . . . . .7  
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Operation with DVD and Video CD . . . . . . . . . . . . . . . . . . . . . . .17  
Playing a DVD or Video CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
Special DVD Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
DVD Audio Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20  
Operation with Audio CD and MP3 / WMA Disc . . . . . . . . . . . .21  
Playing an Audio CD or MP3/WMA Disc . . . . . . . . . . . . . . . . . . .21  
Audio CD and MP3 / WMA Disc Features . . . . . . . . . . . . . . . . . .22  
Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23  
Operation with JPEG Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
Viewing a JPEG Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
Operation with a DVD VR format Disc . . . . . . . . . . . . . . . . . . . .25  
Maintenance and Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25  
Operation with a DivX Movie Disc . . . . . . . . . . . . . . . . . . . . . . .26  
Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27  
Additional Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27  
Speaker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
INSTALLATION AND SETUP  
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Setting up the Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
DVD Player Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Audio Connection to Optional Equipment . . . . . . . . . . . . . . . . .11  
Before operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
On-Screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
AUDIO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
LOCK (Parental Control) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
REFERENCE  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29  
Table of Languages and their Codes . . . . . . . . . . . . . . . . . . . . . .30  
Country Codes List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
BEFORE USE  
ABOUT THE  
SYMBOL DISPLAY  
To ensure proper use of this product, please read this owners manual  
carefully and retain for future reference.  
” may appear on your TV display during operation and indicates  
that the function explained in this owners manual is not available on  
that specific DVD video disc.  
This manual provides information on the operation and maintenance of  
your DVD player. Should the unit require service, contact an authorized  
service location.  
NOTES ON DISCS  
HANDLING DISCS  
SYMBOL USED IN THIS MANUAL  
Do not touch the playback side of the disc. Hold the disc by the edges  
so that fingerprints do not get on the surface. Never stick paper or tape  
on the disc.  
The lightning flash symbol alerts you to the presence of  
dangerous voltage within the product enclosure that may  
constitute a risk of electric shock.  
The exclamation mark alerts you to the presence of important  
operating and maintenance / servicing instructions.  
Indicates hazards likely to cause harm to the unit itself or other  
material damage.  
STORING DISCS  
After playing, store the disc in its case. Do not expose the disc to direct  
sunlight or sources of heat and never leave it in a parked car exposed to  
direct sunlight.  
NOTE:  
Indicates special notes and operating features.  
TIP:  
CLEANING DISCS  
Indicates tips and hints for making the task easier.  
Fingerprints and dust on the disc can cause poor picture quality and  
sound distortion. Before playing, clean the disc with a clean cloth. Wipe  
the disc from the centre out.  
A section whose title has one of the following symbols is applicable only  
to the disc represented by the symbol.  
DVD-V  
DVD-A  
VCD  
CD  
DVD and finalized DVD R/RW  
DVD Audio discs  
Video CDs  
Audio CDs  
MP3  
WMA  
JPEG  
DivX  
MP3 Discs  
WMA Discs  
Do not use strong solvents such as alcohol, benzine, thinner,  
commercially available cleaners, or anti-static spray intended for older  
vinyl records.  
JPEG Discs  
DivX Discs  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
BEFORE USE  
TYPES OF PLAYABLE DISCS  
REGIONAL CODE  
DVD  
This DVD player is designed and manufactured for playback  
of region “2” encoded DVD software. This unit can play  
only DVD discs labeled “2” or “ALL”.  
(8 cm / 12 cm disc)  
2
DVD audio discs  
(8 cm / 12 cm disc)  
NOTES ON REGIONAL CODES  
Most DVD discs have a globe with one or more numbers in it clearly  
visible on the cover. This number must match your DVD player’s  
regional code or the disc cannot play.  
Video CD (VCD)  
(8 cm / 12 cm disc)  
If you try to play a DVD with a different region code from your  
player, the message “Check Regional Code” appears on the TV  
screen.  
Audio CD  
(8 cm / 12 cm disc)  
In addition, this unit plays DivX file, DVD -R, DVD +R, DVD -RW,  
DVD +RW, SVCD and CD-R / CD-RW that contains audio titles, MP3,  
WMA, and/or JPEG files.  
This indicates a product feature that is capable of playing  
DVD-RW discs recorded with Video Recording format.  
NOTES  
Depending on the conditions of the recording equipment or the  
CD-R/RW (or DVD -R, DVD +R, DVD -RW, DVD +RW) disc itself, some  
CD-R/RW (or DVD -R, DVD +R, DVD -RW, DVD +RW) discs cannot  
be played on the unit.  
Do not attach any seal or label to either side (the labelled side or the  
recorded side) of a disc.  
Do not use irregularly shaped CDs (e.g., heart- shaped or octagonal)  
since they may result in malfunctions.  
NOTES ON DVDS AND VIDEO CDS  
Some playback operations of DVDs and Video CDs may be intentionally  
programmed by software manufacturers. This unit plays DVDs and  
Video CDs according to disc content designed by the software  
manufacturer, therefore some playback features may not be available or  
other functions may be added.  
MANUFACTURED UNDER LICENCE FROM DOLBY LABORATORIES.  
“DOLBY”, “PRO LOGIC”, “MLP LOSSLESS”, AND THE DOUBLE-D  
SYMBOL ARE TRADEMARKS OF DOLBY LABORATORIES.  
DTS AND DTS DIGITAL OUT ARE TRADEMARKS OF DIGITAL  
THEATER SYSTEMS, INC.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
BEFORE USE  
DISC-RELATED TERMS  
PBC: PLAYBACK CONTROL (VIDEO CD ONLY)  
Playback control is available for Video CD (VCD) version 2.0 disc  
formats. PBC allows you to interact with the system via menus, search  
functions, or other typical computer-like operations. Moreover, still  
pictures of high resolution can be played if they are included in the disc.  
Video CDs not equipped with PBC (Version 1.1) operate in the same  
way as audio CDs.  
DVD R / DVD RW  
DVD -R and DVD +R are two different standards for recordable DVD  
drives and discs. This format allows information to be recorded onto the  
DVD disc only once. DVD +RW and DVD -RW are two standards for  
re-writable media, meaning the DVD content can be erased and  
re-recorded. Single-sided discs can hold 4.38 Gigabytes and double-  
sided discs hold twice as much. There are no dual layer single sided  
recordable discs.  
TITLE (DVD VIDEO DISCS ONLY)  
A title is generally a distinct section of a DVD disc. For example the main  
feature could be title 1, a documentary describing how the film was  
made could be title 2, and cast interviews could be title 3. Each title is  
assigned a reference number enabling you to locate it easily.  
VCD (VIDEO CD)  
A VCD holds up to 74 minutes (650 MB disc) or 80 minutes (700 MB  
disc) of MPEG-1 full-motion video along with quality stereo sound.  
CHAPTER (DVD VIDEO DISCS ONLY)  
MPEG  
A chapter is a segment of a title such as a scene in a film or one  
interview in a series. Each chapter is assigned a chapter number,  
enabling you to locate the chapter you want. Depending on the disc,  
chapters may not be recorded.  
MPEG is an international standard for video and audio compression.  
MPEG-1 is used in encoding video for VCD and provides for  
multichannel surround sound coding such as PCM, Dolby Digital, DTS  
and MPEG audio.  
GROUP (DVD AUDIO DISCS ONLY)  
MP3  
The main audio content or accompanying feature content or additional  
feature content, or music album. Each group is assigned a group  
reference number enabling you to locate it easily.  
MP3 is a popular compression format used for digital audio files that  
yields very high near-CD quality.  
WMA  
SCENE (VCD)  
Windows media audio file. A type of coding / decoding developed by  
Microsoft Corp.  
On a video CD with PBC (playback control) functions, moving pictures  
and still pictures are divided into sections called “scenes”. Each scene is  
displayed in the menu screen and assigned a scene number, enabling  
you to locate the scene you want. A scene is composed of one or several  
tracks.  
JPEG  
Joint Pictures Expert Group. JPEG is a compressed file format that allows  
you to save images with no limit on the number of colors.  
TRACK  
DIVX  
A distinct element of audiovisual information, such as the picture or  
sound track for a specific language (DVD), or a musical piece on a  
video or audio CD. Each track is assigned a track number, enabling  
you to locate the track you want. DVD discs allow one track of video  
(with multiple angles) and several tracks of audio.  
DivX is the name of a revolutionary new video codec which is based on  
the new MPEG-4 compression standard for video. You will be able to  
play DivX movies using this DVD player.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
FRONT PANEL AND DISPLAY WINDOW  
Front Panel  
POWER  
Switches the player ON and OFF.  
Power indicator  
PLAY  
Starts playback.  
PAUSE  
Pause playback temporarily/press  
repeatedly for frame-by-frame  
playback.  
STOP  
Stops playback.  
OPEN / CLOSE  
Opens or closes the disc tray.  
Disc Tray  
Insert a disc here.  
SCAN (  
/
)
Press for fast reverse search  
or forward search.  
Display window  
Shows the current status  
of the player.  
SKIP (  
)
Moves to PREVIOUS or  
NEXT chapter/track.  
Remote Sensor  
Point the DVD Player remote control here.  
Display Window  
Indicates current player  
function (Play, Pause)  
DVD  
DVD inserted  
DVD A  
DVD Audio disc inserted  
Indicates repeat mode  
CD Audio CD inserted  
VCD Video CD inserted  
SVCD Super Video CD inserted  
MP3 MP3 or WMA disc inserted  
Indicates encoding DTS  
and Dolby digital of the  
current disc.  
CHP/TRK  
Indicates current chapter  
or track number  
Indicates total playing  
time/elapsed time  
S VCD DVD A CHP  
MP3  
CD TRK  
D
B
A
ALL  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
REAR PANEL  
COAXIAL (Digital audio out jack)  
Connect to digital (coaxial) audio equipment.  
AUDIO OUT (Left/Right)  
Connect to an amplifier, receiver,  
or stereo system.  
AC Power Cord  
Plug into the power source.  
VIDEO OUT  
Connect to a TV with video inputs.  
SCART/RGB OUT  
Connect to a TV with SCART jack.  
5.1 CHANNEL AUDIO OUT  
Connect to a 5.1 channel receiver  
– center speaker connection  
– subwoofer connection  
– front speakers connections  
– rear (surround) speakers connections  
12V TRIGGER IN  
By connecting this DVD player to another NAD audio  
component or system controller equipped with a 12V trigger  
output, you can remotely operate the T524C power ON/OFF.  
COMPONENT/PROGRESSIVE SCAN VIDEO OUT  
Connect to a TV with Y Cb/Pb Cr/Pr inputs.  
S-VIDEO OUT  
Connect to a TV with S-Video inputs.  
OPTICAL (Digital audio out jack)  
Connect to digital (optical) audio equipment.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
REMOTE CONTROL  
OFF  
ON  
Switches DVD Player OFF.  
Switches DVD Player ON.  
PROGRAM  
ON  
OFF  
ANGLE  
RANDOM  
ZOOM  
AUDIO  
Enters to the program edit mode or exits from that.  
Selects an audio language (DVD).  
CLEAR  
AUDIO  
SUBTITLE  
RPT A-B  
CLEAR  
Removes a track number on the program list or a mark  
on the MARKER SEARCH menu.  
SUBTITLE  
Selects a subtitle language.  
REPEAT  
PROGRAM  
MARKER  
ZOOM  
Enlarges video image.  
ANGLE  
Selects a DVD camera angle if available  
0-9 number buttons  
Selects numbered items in a menu.  
REPEAT  
Repeat chapter, track, title, all.  
SEARCH RESOLUTION  
RPT A-B  
Repeat sequence.  
SCAN (  
)
Press for fast reverse search or forward search.  
RANDOM  
Plays tracks in random order.  
1
4
7
2
5
8
3
6
9
MENU  
Accesses menu on a DVD disc.  
MARKER  
Marks any point during playback.  
RTN  
SEARCH  
Displays the menu of a video CD with PBC.  
Displays MARKER SEARCH menu.  
RESOLUTION  
OPEN/CLOSE  
Opens and closes the disc tray.  
0
You can change the resolution depending on your TV  
.
SLOW  
SCAN  
SETUP  
SLOW (  
Reverse/ Forward slow playback.  
/
)
STOP (  
Stops playback.  
)
TITLE  
PAUSE/STEP (  
)
TITLE  
MENU  
Displays the discs Title menu, if available.  
Pauses playback temporarily/ press repeatedly  
for frame-by-frame playback.  
SETUP  
ENTER  
Accesses or removes setup menu.  
Reverse SKIP (  
)
Go to beginning of current chapter or track or go  
to previous chapter or track.  
(left/right/up/down)  
- Selects an item in the menu.  
RTN  
DISP  
PLAY (  
)
OPEN/CLOSE  
STOP  
PLAY  
PAUSE/STEP  
Starts playback.  
ENTER  
Forward SKIP (  
)
Acknowledges menu selection  
SKIP  
SKIP  
Go to next chapter or track.  
DISP  
Accesses On-Screen display  
DVD 6  
PLACE BATTERIES INTO OPENING. ENSURE  
THE CORRECT POLARITY IS OBSERVED  
REPLACE BATTERY COVER BY ALIGNING AND  
INSERTING THE TWO TABS INTO THE HOLES.  
PRESS IN AND LIFT TAB TO REMOVE  
BATTERY COVER OUT FROM RECESS  
PRESS BATTERY COVER INTO PLACE UNTIL IT  
'CLICKS' CLOSED  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and Setup  
CONNECTIONS  
SETTING UP THE PLAYER  
Video and Audio Connections to Your TV  
Make sure the DVD player is connected directly to the TV and not to a  
VCR, otherwise the DVD image could be distorted by the copy  
protection system.  
The picture and sound of a nearby TV, VCR, or radio may be distorted  
during playback. If this occurs, position the player away from the TV,  
VCR, or radio, or turn off the unit after removing the disc.  
Video  
Connect the VIDEO OUT jack on the DVD player to the video in jack on  
the TV using the video cable (V).  
DVD PLAYER CONNECTIONS  
Depending on your TV and other equipment there are various ways  
you can connect the player. Please refer to the manuals of your TV,  
stereo system or other devices as necessary for additional connection  
information.  
SCART connection  
Connect the TO TV SCART jack on the DVD Player to the  
corresponding in jacks on the TV using the SCART cable (T).  
Component Video (Color Stream®)  
Connect the COMPONENT VIDEO OUT/PROGRESSIVE SCAN jacks on  
the DVD Player to the corresponding in jacks on the TV using an Y Pb  
Pr cable (C).  
Rear of TV  
SCART INPUT  
VIDEO  
INPUT  
COMPONENT VIDEO  
PROGRESSIVE SCAN INPUT  
/
AUDIO INPUT  
Y
L
Pr  
Pb  
R
PROGRESSIVE SCAN (COLORSTREAM® PRO):  
If your television is a high-definition or “digital ready” television, you  
may take advantage of the DVD Players progressive scan output for  
the highest video resolution possible.  
C
A
V
T
If your TV does not accept the Progressive Scan format, the picture  
will appear scrambled if you try Progressive Scan on the DVD Player.  
NOTES  
Set the Progressive to “On” on the setup menu for progressive  
signal, see page 14.  
Set the progressive to “Off” by removing any disc from the unit and  
close the disc tray. see that “no disc” is displayed on the display  
window. Then press STOP and hold it for five seconds before  
releasing it.  
Rear of DVD player  
Progressive scan does not work with the analogue video connections  
(yellow VIDEO OUT jack).  
CAUTION  
Audio Connection to Your TV:  
You must set the TV Output Select option to use COMPONENT VIDEO  
OUT/PROGRESSIVE SCAN and SCART jacks.  
Connect the left and right AUDIO OUT jacks of the DVD Player to the  
audio left and right IN jacks on the TV (A) using the audio cables. Do  
not connect the DVD Players AUDIO OUT jack to the Phono In jack  
(record deck) of your audio system.  
(See “TV Output Select” on page 14.)  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and Setup  
CONNECTIONS  
AUDIO CONNECTION TO OPTIONAL EQUIPMENT  
Amplifier equipped with 2-channel analogue stereo or Dolby Pro  
Logic ll / Pro Logic  
Connect the left and right AUDIO OUT jacks on the DVD player to the  
audio left and right IN jacks on your amplifier, receiver, or stereo system,  
using the audio cables (A).  
Connect the DVD player to your optional equipment for audio output.  
Rear of DVD player  
Amplifier equipped with 2-channel digital stereo (PCM) or audio  
/ video receiver equipped with a multi-channel decoder (Dolby  
Digital™, MPEG 2, or DTS)  
1
Connect one of the DVD Players DIGITAL AUDIO OUT jacks  
(OPTICAL O or COAXIAL X) to the corresponding in jack on your  
amplifier.  
2
Use an optional digital (optical O or coaxial X) audio cable.  
O
X
A
DIGITAL MULTI-CHANNEL SOUND  
A digital multi-channel connection provides the best sound quality. For  
this you need a multi-channel audio / video receiver that supports one  
or more of the audio formats supported by your DVD player such as  
MPEG 2, Dolby Digital and DTS. Check the receiver manual and the  
logos on the front of the receiver.  
L
R
OPTICAL  
COAXIAL  
DIGITAL INPUT  
AUDIO INPUT  
Amplifier (Receiver)  
NOTES  
If the audio format of the digital output does not match the  
capabilities of your receiver, the receiver produces a strong, distorted  
sound or no sound at all.  
Six Channel Digital Surround Sound via a digital connection can only  
be obtained if your receiver is equipped with a Digital Multi-channel  
decoder.  
To see the audio format of the current DVD in the on-screen display,  
press AUDIO.  
F
Analogue connection to a multi-channel A/V receiver with  
6 Channel connectors (Dolby Digital)  
1
2
This DVD Player contains a multi-channel decoder.  
This enables playback of DVDs recorded in Multi-channel Surround  
without the need for an optional decoder.  
C
Front R  
Rear R  
Front L  
Center  
Make the appropriate Sound settings for Analogue Output and Speaker  
Settings in the setup menu. See page 28.  
Rear L Subwoofer  
ANAOG 5.1CH AUDIO INPUT  
R
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and Setup  
BEFORE OPERATION  
Example: On-Screen Display during  
playing DVD Video  
ON-SCREEN DISPLAY  
Items  
Selection Method  
, Numbers  
ENTER  
You can display the general playback status on the TV screen. Some  
items can be changed using the menu. To use the on-screen display:  
Title Number  
1 / 3  
1
2
3
Press DISPLAY during playback.  
, Numbers  
ENTER  
Chapter Number  
Time search  
Press  
Press  
to select an item. The selected item is highlighted.  
to change the setting. You can also use the number  
1 / 12  
Numbers, ENTER  
buttons if appropriate (e.g. inputting the title number). For some  
functions, press ENTER to execute the setting.  
0:20:09  
Audio language  
and Digital Audio  
Output mode  
or  
AUDIO  
NOTES  
Some discs may not provide all of the features shown below.  
or  
Subtitle language  
Angle  
ABC  
1 ENG  
1 / 3  
If no button is pressed for 10 seconds, the on-screen display  
disappears.  
SUBTITLE  
or  
ANGLE  
PLAYBACK STATUS/RESTRICTIONS  
Sound  
3D SUR  
Title  
Repeat title  
A - B  
Repeat sequence  
Example: On-Screen Display during  
playing VCD  
1 / 9  
Enter a Marker  
MARKER SEARCH  
Marker Search menu  
Resume play from this point  
Items  
Selection Method  
Action prohibited or not available  
, Numbers  
ENTER  
Track Number  
(or PBC mode)  
1 / 3  
Numbers  
ENTER  
Time search  
0:20:09  
or  
AUDIO  
Audio Channel  
Sound  
3D SUR  
Example: On-Screen Display during  
playing DivX movie disc  
Example: On-Screen Display during  
playing DVD Audio  
Items  
Selection Method  
Items  
Selection Method  
, Numbers  
ENTER  
Track Number  
1 / 3  
, Numbers  
ENTER  
Group Number  
Numbers, ENTER  
Time search  
0:20:09  
, Numbers  
ENTER  
Track Number  
Time search  
Audio language  
and Digital Audio  
Output mode  
or  
AUDIO  
Display only  
1
0:20:09  
MP3  
DVD Audio  
or  
Output mode  
AUDIO  
or  
Subtitle language  
Sound  
ENG  
ABC  
SUBTITLE  
Subtitle language  
Page (or Angle)  
Display only  
ABC  
OFF  
3D SUR  
or  
or  
ANGLE  
1 / 3  
Sound  
3D SUR  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and Setup  
BEFORE OPERATION  
INITIAL SETTINGS  
LANGUAGE  
By using the Setup menu, you can make various adjustments to items  
such as picture and sound. You can also set a language for the subtitles  
and the Setup menu, among other things. For details on each Setup  
menu item, see pages 13 to 16.  
LANGUAGE  
English  
Original  
Off  
Menu Language  
Disc Audio  
Disc Subtitle  
Disc Menu  
Original  
TO DISPLAY AND EXIT THE MENU:  
Press SETUP to display the menu. A second press of SETUP will take you  
back to initial screen.  
Move  
Select  
To go to the next level:  
Press  
To go back to the previous level:  
Press on the remote control.  
on the remote control.  
MENU LANGUAGE  
Select a language for the Setup menu and on-screen display.  
DVD-V  
DVD-A  
DISC AUDIO / SUBTITLE / MENU  
GENERAL OPERATION  
Select the language you prefer for the audio track (disc audio), subtitles,  
and the disc menu.  
1
2
Press SETUP. The Setup menu appears.  
Use to select the desired option then press  
to move to the  
Original: Refers to the original language in which the disc was  
second level. The screen shows the current setting for the selected  
item, as well as alternate setting(s).  
recorded.  
3
4
5
Use  
to the third level.  
Use to select the desired setting then press ENTER to confirm  
to select the second desired option then press  
to move  
Other: To select another language, press number buttons then ENTER  
to enter the corresponding 4-digit number according to the language  
code list in the reference chapter. If you enter the wrong language code,  
press CLEAR.  
your selection. Some items require additional steps.  
Press SETUP or PLAY to exit the Setup menu.  
DISPLAY  
DISPLAY  
TV Aspect  
16  
:
9
Wide  
Display Mode  
Progressive Scan  
TV Output Select  
Widescreen  
Off  
RGB  
Move  
Select  
DVD-V  
DVD-A  
TV ASPECT  
4:3: Select when a standard 4:3 TV is connected.  
16:9 Wide: Select when a 16:9 wide TV is connected.  
DVD-V  
DVD-A  
DISPLAY MODE  
Display Mode setting works only when the TV Aspect mode is  
set to “4:3”.  
Letterbox: Displays a wide picture with bands on the upper and lower  
portions of the screen.  
Panscan: Automatically displays the wide picture on the entire screen  
and cuts off the portions that do not fit.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and Setup  
BEFORE OPERATION  
PROGRESSIVE SCAN  
TV OUTPUT SELECT  
Progressive Scan Video provides the highest quality pictures with less  
flickering.  
Set the players TV Output Select options according to the TV  
connection type.  
If you are using the Component Video jacks for connection to a TV or  
monitor that is compatible with a progressive scan signal, set Progressive  
Scan to On.  
YPbPr: When your TV is connected with the COMPONENT VIDEO  
OUT/PROGRESSIVE SCAN jacks on the DVD player.  
RGB: When your TV is connected with the SCART (RGB signal) jack.  
TO TURN ON PROGRESSIVE SCAN:  
Connect Component out of the DVD to the input of your  
monitor/television, set your television or monitor to Component Input.  
AUDIO  
1
Select “Progressive Scan” on the DISPLAY menu then press  
.
Each DVD disc has a variety of audio output options. Set the players  
AUDIO options according to the type of audio system you use.  
DISPLAY  
TV Aspect  
Display Mode  
AUDIO  
Progressive Scan  
TV Output Select  
On  
Off  
Dolby Digital  
DTS  
Bitstream  
Bitstream  
PCM  
MPEG  
Sample Freq.  
5.1 Speaker Setup  
DRC  
48 kHz  
Select  
On  
Prev.  
Move  
Enter  
Move  
Select  
2
3
Select “On” using the  
buttons.  
Press ENTER to confirm your selection. The confirm menu will  
appear.  
DOLBY DIGITAL / DTS / MPEG DVD  
DivX  
BITSTREAM: Select “Bitstream” if you connect the DVD Players  
DIGITAL OUT jack to an amplifier or other equipment with a Dolby  
Digital, DTS or MPEG decoder.  
NOTE  
If your TV does not accept the Progressive Scan format, the picture  
will appear scrambled if you try Progressive Scan on the DVD Player.  
PCM (FOR DOLBY DIGITAL / MPEG): Select when connected  
to a two-channel digital stereo amplifier. DVDs encoded in Dolby  
Digital or MPEG will be automatically downmixed to two-channel  
PCM audio.  
4
5
When the confirm menu appears on your screen Cancel is  
highlighted as default. Use the  
buttons to highlight Enter.  
Pressing ENTER will set the player to Progressive scan mode.  
OFF (FOR DTS): If you select “Off”, the DTS signal is not output  
CAUTION  
through the DIGITAL OUT jack.  
Once the setting for progressive scan output is entered, an image will  
only be visible on a progressive scan compatible TV or monitor. If you set  
Progressive Scan to On in error, you must reset the unit. First, remove the  
disc in the DVD Player. Next, press STOP ( ) and hold it for five seconds  
before releasing it. The video output will be restored to the standard  
setting, and a picture will once again be visible on a conventional  
analogue TV or monitor.  
DVD-V  
DVD-A  
SAMPLE FREQ. (FREQUENCY)  
If your receiver or amplifier is NOT capable of handling 96 kHz  
signals, select 48 kHz. When this choice is made, this unit  
automatically converts any 96 kHz signals to 48 kHz so your system  
can decode them.  
If your receiver or amplifier is capable of handling 96 kHz signals,  
select 96 kHz. When this choice is made, this unit passes each type  
of signal through without any further processing.  
Check the documentation for your amplifier to verify its capabilities.  
DVD-V  
DVD-A  
DivX  
5.1 SPEAKER SETUP  
Select speaker settings, including volume balance and distance, or  
test the speaker settings.  
Speaker settings are only active on the Analogue Multi-Channel  
Output. (See “Speaker Settings”, page 28.)  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and Setup  
BEFORE OPERATION  
DYNAMIC RANGE CONTROL (DRC)  
DivX  
B.L.E. (BLACK LEVEL EXPANSION)  
To select the black level of playback pictures. Set your preference and  
monitors ability.  
DVD-V  
DVD-A  
With the DVD format, you can hear a programs soundtrack in the  
most accurate and realistic presentation possible, thanks to digital  
audio technology. However, you may wish to compress the dynamic  
range of the audio output (the difference between the loudest  
sounds and the quietest ones). This allows you to listen to a movie  
at a lower volume without losing clarity of sound. Set DRC to On  
for this effect.  
On: Expanded grey scale. (0 IRE cut off)  
Off: Standard grey scale. (7.5 IRE cut off)  
NOTE  
The B.L.E. function works on NTSC systems only.  
DivX  
DIVX(R) VOD  
OTHERS  
You can show the DivX DRM (Digital Right Management) Registration  
code for your unit only.  
The PBC, Auto Play, B.L.E. and DivX(R) VOD settings can be changed.  
OTHERS  
PBC  
On  
Auto Play  
B.L.E.  
Off  
On  
DivX(R) VOD  
Select  
The Registration code is used for VOD (Video-On- Demand) service  
agent. You can purchase or rent an encrypted movie file.  
Select  
Move  
VCD  
Set Playback Control (PBC) to On or Off.  
PBC  
NOTE  
If you rent the DivX VOD file, it has several options of viewing limits  
as show below.  
On: Video CDs with PBC are played according to the PBC.  
Off: Video CDs with PBC are played the same way as Audio CDs.  
Displays the number of times that you can watch the file.  
DVD-V  
AUTO PLAY  
You can set up the DVD Player so a DVD disc automatically starts  
playing whenever the DVD is inserted.  
If Auto Play mode is set to On, this DVD player will search for the title  
that has the longest playback time and then play back the title  
automatically.  
On: Auto Play function is active.  
Off: Auto Play function is not active.  
Shows if the rental has expired.  
NOTE  
The Auto Play function may not work for some DVDs.  
Displays an authorization error.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and Setup  
BEFORE OPERATION  
LOCK (PARENTAL CONTROL)  
PASSWORD (SECURITY CODE)  
You can enter or change password.  
LOCK  
1
2
Select Password on the LOCK menu then press  
.
Rating  
Unlock  
New  
Follow step 2 as shown left (Rating). “Change” or “New” is  
highlighted.  
Password  
Country Code  
UK  
3
4
Enter the new 4-digit code, then press ENTER. Input it again to verify.  
Press SETUP to exit the menu.  
If you forget your Security Code  
Move  
Select  
If you forget your security code you can clear it using the following  
steps:  
RATING  
DVD-V  
1
2
3
Press SETUP to display the Setup menu.  
Some movies contain scenes that may not be suitable for children to  
view. Many of these discs contain parental control information that  
applies to the complete disc or to certain scenes on the disc. Movies  
and scenes are rated from 1 to 8, depending on the country. Some  
discs offer more suitable scenes as an alternative.  
Input the 6-digit number “210499” and the security code is cleared.  
Enter a new code as described above.  
COUNTRY CODE  
Enter the code of the country/area whose standards were used to  
rate the DVD video disc, based on the list in the reference chapter.  
DVD-V  
The parental control feature allows you to block access to scenes  
below the rating you input, thereby preventing your children from  
being able to view material you believe is unsuitable.  
1
2
3
4
5
Select “Country Code” on the LOCK menu then press  
Follow step 2 as shown in the left column (Rating).  
.
Select the first character using  
buttons.  
Press ENTER and select the second character using  
Press ENTER to confirm your country code selection.  
buttons.  
1
2
Select “Rating” on the LOCK menu then press  
.
To access the Rating, Password and Country Code features, you  
must input the 4-digit security code you created. If you have not yet  
entered a security code you are prompted to do so.  
Input a 4-digit code and press ENTER. Enter it again and press ENTER  
to verify. If you make a mistake before pressing ENTER, press CLEAR.  
3
Select a rating from 1 to 8 using the  
buttons.  
Rating 1-8  
Rating one (1) has the most restrictions and rating eight (8) is the  
least restrictive  
Unlock  
If you select unlock, parental control is not active and the disc plays  
in full.  
NOTE  
If you set a rating for the player, all disc scenes with the same  
rating or lower are played. Higher rated scenes are not played  
unless an alternate scene is available on the disc. The alternative  
must have a lower rating. If no suitable alternative is found,  
playback stops. You must enter the 4-digit password or change  
the rating level in order to play the disc.  
4
Press ENTER to confirm your rating selection, then press SETUP to  
exit the menu.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
OPERATION WITH DVD AND VIDEO CD  
PLAYING A DVD OR VIDEO CD  
PLAYBACK SETUP  
GENERAL FEATURES  
NOTES  
You can enter or change password.  
Unless stated otherwise, all operations described use the remote  
control. Some features may also be available on the Setup menu.  
1
2
3
4
Turn on the TV and select the video input source connected to the  
DVD player.  
DVD-V  
DVD-A  
Turn on the audio system (if applicable) and select the input source  
connected to the DVD player.  
MOVING TO ANOTHER TITLE/GROUP  
When a disc has more than one title/group, you can move to another  
title/group. Press DISPLAY while playback is stopped then the  
Press OPEN/CLOSE to open the disc tray and load your chosen disc  
in the tray, with the playback side down.  
appropriate number (0-9) or use  
to move to another  
Press OPEN/CLOSE to close the tray. Playback starts automatically. If  
playback does not start, press PLAY.  
title/group. You can play any title by inputting its number while  
playback is stopped.  
In some cases, the disc menu might appear instead:  
MOVING TO ANOTHER CHAPTER/TRACK  
DVD-V  
DVD-V  
DVD-A  
VCD  
DivX  
Use the  
buttons to select the title/chapter you want to  
When a title on a disc has more than one chapter or a disc has more  
than one track, you can move to another chapter/track as follows:  
view, then press ENTER to start.  
Press TITLE or DVD MENU to return to the menu screen.  
Press SKIP  
or  
briefly during playback to select the next  
chapter/track or to return to the beginning of the current  
chapter/track.  
DVD-A  
Press SKIP  
twice briefly to step back to the previous  
Use the  
buttons to select an option you want, then press  
chapter/track.  
ENTER to view the option.  
To go directly to any chapter during DVD playback, press DISPLAY  
and press to select the chapter/track icon. Then, input the  
chapter/track number or use  
.
VCD  
DVD-V  
DVD-A  
VCD  
DivX  
Use the number buttons to select the track you want to view and  
press RETURN to return to the menu screen. Menu settings and  
operating procedures may differ. Follow the instructions on the each  
menu screen. You also may set PBC to Off (See “PBC” on page 15).  
SEARCH  
1
2
Press SCAN (  
Press SCAN (  
or  
or  
) during playback..  
) repeatedly to select the required speed.  
DVD, DivX disc; X2, X4, X16 or X100  
Video CD; X2, X4 or X8  
NOTES  
If parental control is set and the disc is not within the rating settings  
you must input the password. (See “Lock Menu” on page 16.)  
DVDs may have a region code. Your player will not play discs that  
have a region code different from your player. The region code for  
this player is 2 (two).  
3
To exit SEARCH mode, press PLAY.  
NOTE  
When using a DVD audio disc that includes pictures, this operation  
may be permitted in some picture segments.  
VCD  
CHANGING THE AUDIO CHANNEL  
Press AUDIO repeatedly during playback to hear a different audio  
channel (Stereo, Left, or Right).  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
OPERATION WITH DVD AND VIDEO CD  
DVD-V  
DVD-A  
VCD  
DivX  
STILL PICTURE AND FRAME-BY-FRAME PLAYBACK  
REPEAT  
You can play a title/chapter/all/track/group on a disc. Press REPEAT  
during playback to select a desired repeat mode.  
DVD-V  
DVD-A  
VCD  
DivX  
1
2
Press PAUSE/STEP on the remote control during playback. Advance  
the picture frame-by-frame by pressing PAUSE/STEP repeatedly.  
To exit still motion mode, press PLAY.  
DVD VIDEO DISCS - REPEAT CHAPTER/TITLE/OFF  
1
2
3
Chapter: repeats the current chapter.  
Title: repeats the current title.  
Off: does not play repeatedly.  
NOTE  
When using a DVD audio disc that includes pictures, this operation  
may be permitted in some picture segments.  
VIDEO CDS, DIVX DISCS - REPEAT TRACK/ALL/OFF  
1
2
3
Track: repeats the current track  
All: repeats all the tracks on a disc.  
Off: does not play repeatedly.  
DVD-V  
DVD-A  
VCD  
DivX  
SLOW MOTION  
1
Press PAUSE/STEP ( ) during playback.  
The DVD player will now go into PAUSE mode.  
2
Use the SCAN (  
1/8,  
1/4, or  
or  
) to select the required speed:  
1/2 (backward), or 1/16,  
1/ 16,  
1/8,  
DVD AUDIO DISCS - REPEAT TRACK/GROUP/OFF  
1/4, or  
1
2
3
Track: repeats the current track.  
Group: repeats the current Group.  
Off: does not play repeatedly.  
1/2 (forward).  
With a DivX Disc and Video CD, the Slow speed changes:  
1/8, 1/4 or 1/2 (forward).  
To exit Slow Motion mode, press PLAY ( ).  
1/16,  
3
NOTES  
On a Video CD with PBC, you must set PBC to Off on the setup  
menu to use the repeat function (See “PBC” on page 15).  
If you press SKIP ( ) once during Repeat Chapter (Track) playback,  
the repeat playback cancels.  
NOTES  
Slow motion playback in reverse is not possible with Video CDs and  
DivX Discs.  
When using a DVD audio disc that includes pictures, this operation  
may be permitted in some picture segments.  
VCD  
3D SURROUND  
DVD-V  
DivX  
To produce a 3D surround effect that simulates multi- channel audio  
from two stereo speakers (instead of the five+ speakers normally  
required for multi-channel audio from a home theatre system).  
VCD  
RANDOM  
1
Karaoke DVD  
Press RANDOM during playback. The unit automatically begins  
random playback and RANDOM appears on the TV screen.  
Press RANDOM again to return to normal.  
1
2
Press DISPLAY during playback.  
Use to select the sound option.  
The sound option will be highlighted.  
Use to select “3D SUR”.  
To turn off the 3D Surround effect, select “Normal”.  
2
TIP  
3
By pressing SKIP  
during random playback, the unit selects  
another title (track) and resumes random playback.  
VCD  
DVD-V  
DivX  
TIME SEARCH  
NOTE  
To start playing at any chosen time on the disc:  
On a Video CD with PBC, You must set PBC to Off on the setup menu  
to use the random function  
1
Press DISPLAY during playback. The time search box shows the  
elapsed playing time.  
(See “PBC” on page 15).  
2
3
Press  
to select the time clock icon and “-:--:--” appears.  
Input the required start time in hours, minutes, and seconds from  
left to right. If you enter the wrong numbers, press CLEAR to remove  
the numbers you entered. Then input the correct numbers.  
Press ENTER to confirm. Playback starts from the selected time.  
REPEAT A-B  
To repeat a sequence.  
DVD-V  
DVD-A  
VCD  
DivX  
1
2
3
Press A-B at your chosen starting point. “ A * ” appears briefly on  
the TV screen.  
4
Press A-B again at your chosen end point. “A B” appears briefly on  
the TV screen and the repeat sequence begins.  
Press A-B again to cancel.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
OPERATION WITH DVD AND VIDEO CD  
SPECIAL DVD FEATURES  
DVD-V  
DVD-A  
VCD  
DivX  
ZOOM  
Use zoom to enlarge the video image.  
CHECKING THE CONTENTS OF DVD DISCS: MENUS  
DVDs may offer menus that allow you to access special features. To  
use the disc menu, press DVD MENU. Input the corresponding number  
1
2
Press ZOOM during playback or still playback to activate the Zoom  
function. The square frame appears briefly in the right bottom of the  
picture.  
or use the  
buttons to highlight your selection.  
Each press of the ZOOM button changes the TV screen in the  
sequence: 100% size 400% size 1600% size screen fit  
mode 100% size  
Then press ENTER.  
DVD-V  
DVD-A  
TITLE MENU  
Screen fit mode:  
1
Press TITLE. If the current title has a menu, the menu appears on the  
You can change the way the image appears on the screen when  
screen. Otherwise, the disc menu may appear.  
The menu offers features such as camera angles, spoken language  
and subtitle options, and chapters for the title.  
Press TITLE to exit.  
you’re playing a DVD movie. Press  
Enhanced, and Maximum.  
to select between Normal,  
2
3
4
Use the  
buttons to move through the zoomed picture.  
3
To resume normal playback, press CLEAR.  
DVD-V  
DVD-A  
DISC MENU  
NOTES  
1
2
Press DVD MENU and the disc menu is displayed.  
Press DVD MENU again to exit.  
Zoom may not work on some DVDs.  
Screen fit mode is available for playing the DVD disc, VR disc and  
movie file.  
DVD-V  
DVD-A  
CAMERA ANGLE  
If the disc contains scenes recorded at different camera angles, you can  
change to a different camera angle during playback. Press ANGLE  
repeatedly during playback to select a desired angle. Note that the  
number of the current angle appears on the display.  
VCD  
DVD-V  
DivX  
MARKER SEARCH  
To enter a Marker  
You can start playback from up to nine memorized points. To enter a  
marker, press MARKER at the desired point on the disc. The Marker icon  
appears on the TV screen briefly. Repeat to enter up to nine markers.  
TIP  
The angle indicator will blink on the TV screen during scenes  
recorded at different angles as an indication that angle switching is  
possible.  
To Recall or Clear a Marked Scene  
1
2
3
4
During disc playback, press SEARCH. The marker search menu  
appears on the screen.  
Within 10 seconds, press  
want to recall or clear.  
to select a marker number that you  
CHANGING THE AUDIO LANGUAGE  
DVD-V  
DVD-A  
DivX  
Press ENTER and playback starts from the marked scene. Or, Press  
CLEAR and the marker number is erased from the list.  
You can play any marker by inputting its number on the marker  
search menu.  
Press AUDIO repeatedly during playback to hear a different audio  
language or audio track.  
With DVD-RW discs recorded in VR mode that have both a main and a  
Bilingual audio channel, you can switch between Main (L), Bilingual (R),  
or a mix of both (Main + Bilingual) by pressing AUDIO.  
DVD-V  
DVD-A  
VCD  
DivX  
PAUSE  
DVD-V  
DivX  
1
2
Press PAUSE/STEP during playback.  
To return to playback, press PLAY.  
SUBTITLES  
Press SUBTITLE repeatedly during playback to see the different subtitle  
languages.  
NOTES  
The subtitle file of the DivX file is displayed only in smi, srt and sub.  
If there is no information or there is a code that cannot be read in  
the DivX file, “1” etc., is displayed.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
OPERATION WITH DVD AND VIDEO CD  
DVD AUDIO DISCS  
MOVING TO ANOTHER GROUP  
DVD Audio is a new disc format building on the success of DVD to  
provide high quality, uncompressed, multi-channel audio for a new  
experience in audio quality. A DVD Audio disc can be identified by the  
DVD audio logo on the disc jacket or on the disc itself.  
Some DVD Audio discs divide content into different groups. Your player  
enables you to quickly access different groups during playback via the  
on-screen display.  
1
2
3
Press DISPLAY during playback on in stop mode.  
Press  
Press  
to select Group icon.  
DVD Audio can provide higher quality stereo than Audio CDs with a  
sampling rate of up to 192 kHz (compared to 44.1 kHz for CDs). DVD  
Audio digital sound can be delivered with up to 24 bits of data  
(compared to 16 bits for a standard CD).  
or the numbered buttons (0-9) to select a group number.  
NOTE  
A typical DVD Audio disc contains up to seven times the data capacity  
of a CD. This additional space is used for music, either Advanced  
Resolution multi- channel sound quality that is closer to the artists  
master recording or for longer recordings. Many DVD Audio discs  
contain on-screen text, such as artist biographies, playlists, or lyrics.  
Some DVD Audio discs contain photo galleries or video clips.  
Sometimes the author of the disc creates hidden content that can  
only be accessed by entering a password. If the lock icon appears on  
the TV screen, enter the password (sometimes you’ll find it on the  
disc’s jacket cover or on a web site). This password control isn’t  
dictated by your DVD Player — it is a function of the disc.  
Since the authoring of DVD Audio Discs varies, some of the on-screen  
display choices might not be available for the disc you’re playing.  
NOTE  
VIEWING ANOTHER PAGE  
To enjoy maximum sound quality and surround effect of DVD Audio,  
you must use 5.1 channel analogue audio output (5.1CH AUDIO OUT  
jacks on the DVD Player). If you use the DIGITAL OUT (OPTICAL or  
COAXIAL) for your audio connection, the sound will only be similar  
to CD-quality sound even though you’re playing a DVD Audio disc.  
Since DVD Audio discs can hold a lot of content, there are various ways  
to see whats available on the disc.  
1
2
3
Press DISPLAY during playback.  
Press  
Press  
to select Page icon.  
to select a page number.  
What appears on the screen will vary from disc to disc because the  
information available depends upon the way the disc was created.  
NOTE  
Since the authoring of DVD Audio Discs varies, some of the on-screen  
display choices might not be available for the disc you’re playing.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
OPERATION WITH AUDIO CD AND MP3 / WMA DISC  
MP3 / WMA disc compatibility with this player is limited as  
follows:  
PLAYING AN AUDIO CD OR MP3/WMA DISC  
The DVD player can play MP3/WMA formatted recordings on CD-ROM,  
CD-R, or CD-RW discs.  
1
Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48 kHz  
(WMA)  
2
3
Bit rate: within 8 - 320kbps (MP3), 32 - 192kbps (WMA)  
The player cannot read an MP3/WMA file that has a file extension  
other than “.mp3” / “.wma”.  
AUDIO CD  
Once you insert an audio CD a menu appears on the TV screen.  
Press  
to select a track then press PLAY or ENTER and playback  
4
5
CD-R physical format should be ISO 9660  
starts.  
If you record MP3 / WMA files using software that cannot create a  
file system (eg. Direct-CD) it is impossible to playback MP3 / WMA  
files. We recommend that you use Easy-CD Creator, which creates  
an ISO 9660 file system.  
AUDIO CD  
0:52:07  
1 / 12  
List  
Program  
Track1  
6
File names should have a maximum of 8 letters and must  
incorporate an .mp3 or .wma extension.  
Track2  
Track3  
Track4  
Track5  
7
8
They should not contain special letters such as / ? * : “ < > l etc.  
The total number of files on the disc should be less than 650.  
This DVD player requires discs and recordings to meet certain  
technical standards in order to achieve optimal playback quality. Pre-  
recorded DVDs are automatically set to these standards. There are  
many different types of recordable disc formats (including CD-R  
containing MP3 or WMA files) and these require certain pre-existing  
conditions (see above) to ensure compatible playback.  
Track6  
Track7  
Track8  
Clear All  
PROGRAM Edit  
MP3 / WMA  
1
Press  
to select a folder, and press ENTER to see the folder  
to select a track then press PLAY or ENTER. Playback  
contents.  
Press  
2
starts.  
Customers should note that permission is required in order to  
download MP3 / WMA files and music from the Internet. NAD  
ELECTRONICS INTERNATIONAL has no right to grant such  
permission. Permission should always be sought from the  
copyright owner.  
MUSIC  
0:00:00  
1 / 12  
List  
Program  
1-Music1  
2-Music2  
3-Music3  
4-Music4  
5-Music5  
6-Music6  
7-Music7  
Clear All  
DISPLAY Info  
PROGRAM Edit  
ID3 TAG  
When playing a file containing information such as track titles, you  
can see the information by pressing DISPLAY.  
[ Title, Artist, Album, Year, Comment ]  
If there is no information, “NO ID3 TAG” appear on the display.  
TIP  
If you are in a file list on the MUSIC menu and want to return to the  
Folder list, use the  
to highlight  
and press ENTER.  
Press DVD MENU to move to the next page.  
On a CD with MP3/WMA and JPEG, you can switch between  
MP3/WMA and JPEG. Press TITLE and MUSIC or PHOTO at the top  
of the menu is highlighted.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
OPERATION WITH AUDIO CD AND MP3 / WMA DISC  
CD  
MP3  
WMA  
AUDIO CD AND MP3 / WMA DISC FEATURES  
CD  
MP3  
WMA  
RANDOM  
1
Press RANDOM during playback. Random Playback begins  
immediately and RANDOM appears on the menu screen.  
To return to normal playback, press RANDOM repeatedly until  
RANDOM disappears from the menu screen.  
PAUSE  
1
2
Press PAUSE/STEP during playback.  
2
To return to playback, press PLAY, ENTER or press PAUSE/STEP again.  
CD  
MP3  
WMA  
MOVING TO ANOTHER TRACK  
TIP  
1
Press SKIP (  
track or to return to the beginning of the current track.  
Press SKIP twice briefly to go back to the previous track.  
You can play any track by inputting its number.  
or  
) briefly during playback to go to the next  
By pressing SKIP:  
during random playback, the unit selects  
another track and resumes random playback.  
2
3
CD  
REPEAT A-B  
1
To repeat a sequence during disc playback press A-B at your chosen  
starting point. The Repeat icon and “A” appear on the menu screen.  
Press A-B again at your chosen end point. The Repeat icon and  
“A-B” appear on the menu screen, and the sequence begins to play  
repeatedly.  
CD  
MP3  
WMA  
REPEAT TRACK/ALL/OFF  
You can play a track/all on a disc.  
2
1
2
Press REPEAT when playing a disc. The repeat icon appears.  
Press REPEAT to select a desired repeat mode.  
Track: repeats the current track  
3
To exit the sequence and return to normal play, press A-B again. The  
Repeat icon disappears from the menu screen.  
All: repeats all the tracks on a disc.  
Off(No display): does not play repeatedly.  
CD  
3D SURROUND  
NOTE  
If you press SKIP (  
playback cancels.  
To produce a 3D surround effect that simulates multi- channel audio  
from two stereo speakers (instead of the five+ speakers normally  
required for multi-channel audio from a home theatre system).  
) once during Repeat Track playback, the repeat  
1
Press AUDIO during playback.  
CD  
Press SCAN (  
Press SCAN (  
MP3  
WMA  
SEARCH  
1
2
“3D SUR.” appears on the menu screen.  
or  
or  
) during playback.  
2
To return to normal playback, press AUDIO repeatedly until  
“3D SUR.” disappears from the menu screen.  
) repeatedly to select the required speed:  
X2, X4, X8 backward or forward.  
To exit SEARCH mode, press PLAY.  
3
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
PROGRAMMED PLAYBACK  
The program function enables you to store your favourite tracks from  
any disc in the player memory. A program can contain 30 tracks.  
5
6
Press PLAY or ENTER to start. Playback begins in the order in which  
you programmed the tracks. Playback stops after all of the tracks on  
the “Program” list have played once.  
1
Insert a disc.  
Audio CD or MP3/WMA Discs:  
AUDIO CD or MUSIC menu appears.  
To resume normal playback from programmed playback, select a  
track of AUDIO CD (or MUSIC) list and then press PLAY.  
2
Press PROGRAM.  
E
The  
mark will appear to the right of the word“ Program” on the  
REPEAT PROGRAMMED TRACKS  
right side of the menu screen.  
1
2
Press REPEAT when playing a disc. The repeat icon appears.  
Press REPEAT to select a desired repeat mode.  
Track: repeats the current track  
NOTE  
Press PROGRAM again, then the  
E
mark will disappear to exit the  
All: repeats all the tracks on the programmed list.  
Off (No display): does not play repeatedly.  
Program Edit mode.  
NOTE  
If you press :  
playback cancels.  
MUSIC  
AUDIO CD  
once during Repeat Track playback, the repeat  
0:00:00  
1
/
12  
0:52:07  
1
/
12  
List  
E
List  
Program  
2-Music2  
E
Program  
Track5  
Track1  
4-Music4  
1-Music1  
2-Music2  
3-Music3  
4-Music4  
5-Music5  
6-Music6  
7-Music7  
Track2  
Track3  
Track4  
Track5  
Track7  
Track4  
Track1  
6-Music6  
1-Music1  
ERASING A TRACK FROM PROGRAM LIST  
Track6  
Track7  
Track8  
1
Use  
to select the track that you wish to erase from the  
Clear All  
Clear All  
Program list.  
PROGRAM Edit  
DISPLAY Info  
PROGRAM Edit  
2
Press CLEAR. Repeat to erase additional tracks on the list.  
Audio CD Menu  
VIDEO CD  
MP3/WMA Menu  
ERASING THE COMPLETE PROGRAM LIST  
1
2
Press  
Use  
to move to the “Program” list.  
to select “Clear All”, then press ENTER.  
Press PROGRAM while playback is stopped. The program menu  
appears. Press PROGRAM again and hold it down for a few seconds to  
exit the menu.  
NOTE  
The programs are also cleared when the disc is removed.  
NOTE  
On a Video CD with PBC, you must set PBC to Off on the setup menu  
to use the programmed playback (See “PBC” on page 15).  
VIDEO CD  
List  
Track1  
E
Program  
Track5  
Track2  
Track3  
Track4  
Track5  
Track2  
Track3  
Track1  
Clear All  
Video CD Menu  
3
4
Select a track on the “List”, then press ENTER to place the selected  
track on the “Program” list. Repeat to place additional tracks on the  
list.  
Press  
.
Select the track you want to start playing on the “Program” list.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
OPERATION WITH JPEG DISC  
VIEWING A JPEG DISC  
ZOOM  
JPEG  
Using this DVD Player you can view Kodak PICTURE CDs and discs with  
JPEG files.  
Use zoom to enlarge the photo image.  
(see page 19)  
1
Insert a disc and close the tray. The PHOTO menu appears on the TV  
screen.  
JPEG  
during showing a picture to rotate the picture clockwise or  
TO ROTATE PICTURE  
Press  
PHOTO  
counter clockwise.  
List  
Preview  
JPEG Folder 1  
JPEG Folder 2  
JPEG Folder 3  
JPEG Folder 4  
JPEG Folder 5  
JPEG Folder 6  
JPEG Folder 7  
JPEG Folder 8  
TO LISTEN TO MP3/WMA MUSIC WATCHING PICTURE  
JPEG  
You can display files while listening to MP3/WMA music files recorded  
on the same disc.  
1
2
3
4
Insert the disc containing the two types of files in the player.  
Press TITLE to display PHOTO menu.  
2
3
Press  
to select a folder, and press ENTER. A list of files in the  
Press  
Use  
to select a photo file.  
to select icon then press ENTER. Playback starts.  
folder appears. If you are in a file list and want to return to the  
previous Folder list, use the  
and press ENTER.  
buttons on the remote to highlight  
The playback will continue until STOP is pressed.  
If you want to view a particular file, press  
to highlight a file and  
TIP  
press ENTER or PLAY. Viewing the file proceeding starts. While  
viewing a file, you can press STOP to move to the previous menu  
(PHOTO menu).  
To listen to only the desired music watching picture, programmed the  
desired tracks from the “MUSIC” menu and then proceed as above.  
JPEG DISC COMPATIBILITY WITH THIS PLAYER IS LIMITED AS  
FOLLOWS:  
TIP  
Press DVD MENU to move to the next page.  
Depending upon the size and number of JPEG files, it could take a  
long time for the DVD player to read the discs contents. If you don’t  
see an on- screen display after several minutes, some of the files may  
be too large — reduce the resolution of the JPEG files to less than  
2M pixels as 2760 x 2048 pixels and burn another disc.  
The total number of files and folders on the disc should be less  
than 650.  
There are three Slide Speed options  
:
>>> (Fast), >> (Normal), and > (Slow).  
Use  
to highlight the Speed. Then, use  
to select the  
option you want to use then press ENTER.  
On a disc with MP3/WMA and JPEG, you can switch between  
MP3/WMA and JPEG. Press TITLE and MUSIC or PHOTO at the top  
of the menu is highlighted.  
Some discs may be incompatible due to a different recording format  
or the condition of the disc.  
Press RETURN, file information is hidden.  
Ensure that all the selected files have the “.jpg” extensions when  
copying into the CD layout.  
JPEG  
SLIDE SHOW  
Use  
to highlight the  
(Slide Show) then press ENTER.  
If the files have “.jpe” or “.jpeg” extensions, please rename them as  
“.jpg” files.  
JPEG  
STILL PICTURE  
1
File names without a “.jpg” extension will not be able to be read by  
this DVD player even though the files are shown as JPEG image files  
in Windows Explorer.  
Press PAUSE/STEP during slide show. The player will now go into  
PAUSE mode.  
2
To return to the slide show, press PLAY or press PAUSE/STEP again.  
JPEG  
) or cursor ( ) once while viewing a picture  
MOVING TO ANOTHER FILE  
Press SKIP (  
or  
to advance to the next or previous file.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
OPERATION WITH A DVD VR FORMAT DISC  
MAINTENANCE AND SERVICE  
Refer to the information in this chapter before contacting a service  
technician.  
This unit will play DVD-R/RW discs recorded using the DVD-Video  
format that have been finalized using a DVD-recorder.  
This unit will play DVD-RW discs recorded using the Video Recording  
(VR) format.  
HANDLING THE UNIT  
1
Insert a disc and close the tray. The DVD-VR menu appears on the  
TV screen.  
When shipping the unit  
Please save the original shipping carton and packing materials. If you  
need to ship the unit, for maximum protection, re-pack the unit as it was  
originally packed at the factory.  
DVD-VR  
Keeping the exterior surfaces clean  
Do not use volatile liquids such as insecticide spray near the unit.  
Do not leave rubber or plastic products in contact with the unit for  
a long period of time. since they leave marks on the surface.  
2
Press  
to select a track then press PLAY or ENTER and playback  
Cleaning the unit  
starts.  
To clean the player, use a soft, dry cloth. If the surfaces are extremely  
dirty, use a soft cloth lightly moistened with a mild detergent solution.  
NOTES  
Unfinalized DVD-R/RW discs cannot be played in this player.  
Some DVD-VR disc are made with CPRM data by DVD RECORDER.  
Player does not support these kinds of discs and display the “CHECK  
DISC”.  
Do not use strong solvents such as alcohol, benzine, or thinner, as these  
might damage the surface of the unit.  
Maintaining the Unit  
The DVD player is a high-tech, precision device. If the optical pick-up  
lens and disc drive parts are dirty or worn, the picture quality could be  
diminished.  
WHAT IS ‘CPRM’?  
CPRM is a copy protection system (with scramble system) only  
allowing the recording of ‘copy once’ broadcast programs. CPRM  
stands for Content Protection for Recordable Media.  
Depending on the operating environment, regular inspection and  
maintenance are recommended after every 1,000 hours of use.  
This player is CPRM compatible, which means that you can record  
copy-once broadcast programs, but you cannot then make a copy of  
those recordings. CPRM recordings can only be made on DVD-RW  
discs formatted in VR mode, and CPRM recordings can only be  
played on players that are specifically compatible with CPRM.  
For details, please contact your nearest authorized service centre.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
OPERATION WITH A DIVX MOVIE DISC  
DIVX DISC COMPATIBILITY WITH THIS PLAYER IS LIMITED AS  
FOLLOWS:  
Using this DVD Player you can play DivX discs.  
1
Insert a disc and close the tray. The MOVIE menu appears on the TV  
screen.  
Available resolution size of the DivX file is under 720x576 (W x H)  
pixels.  
The file name of the DivX subtitle is available up to 56 characters.  
If there is an impossible code to express the DivX file, it may be  
displayed as " _ " mark on the display.  
MOVIE  
0:00:00  
List  
Movie Folder 1  
Movie Folder 2  
Movie Folder 3  
Movie Folder 4  
Movie Folder 5  
Movie Folder 6  
Movie Folder 7  
Movie Folder 8  
If the number of screen frames is over 30 per 1 second, this  
unit may not operate normally.  
If the video and audio structure of the recorded file is not  
interleaved video, audio or both may not be outputted.  
If the file is recorded with GMC, the unit supports only 1-point  
of the record level.  
2
Press  
to select a folder, and press ENTER. A list of files in the  
* GMC?  
folder appears. If you are in a file list and want to return to the Folder  
GMC is the acronym for Global Motion Compensation. It is an  
encoding tool specified in MPEG4 standard. Some MPEG4 encoders,  
like DivX or Xvid, have this option. There are different levels of GMC  
encoding, usually called 1-point, 2-point, or 3-point GMC.  
list, use the  
ENTER.  
buttons on the remote to highlight  
and press  
3
4
If you want to view a particular file, press  
press ENTER or PLAY.  
to highlight a file and  
Press STOP to exit.  
Playable DivX files  
".avi ", ".mpg ", ".mpeg "  
TIP  
Playable Codec formats  
Press DVD MENU to move to the next page.  
"DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ", "MP43 ",  
"3IVX ".  
On a CD with MP3/WMA, JPEG and MOVIE files, you can switch to  
the MUSIC, PHOTO and MOVIE menu. Press TITLE and MUSIC,  
PHOTO and MOVIE at the top of the menu is highlighted.  
Playable Audio format  
"AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".  
Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48 kHz  
(WMA)  
Bit rate: within 8 - 320kbps (MP3), 32 - 192kbps (WMA)  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
ADDITIONAL INFORMATION  
ADDITIONAL FEATURES  
LAST SCENE MEMORY  
VIDEO MODE SETTING  
With certain discs, the playback picture may be flickering or Dot  
Crawl is shown on straight lines. That means Vertical interpolation or  
De-interlace is not perfectly matched with the disc. In this case, the  
picture quality may be improved by changing the video mode.  
To change the video mode, press and hold DISPLAY about 3 seconds  
during disc playback. The new video mode number selected is  
displayed on the TV screen. Check whether the video quality has  
improved. If not, repeat the above procedure until picture quality is  
improved.  
DVD-V  
DVD-A  
CD  
VCD  
This player memorizes the last scene from the last disc that is viewed.  
The last scene remains in memory even if you remove the disc from the  
player or switch off the player. If you load a disc that has the scene  
memorized, the scene is automatically recalled.  
NOTE  
This player does not memorize the scene of a disc if you switch off  
the player before commencing to play the disc.  
Video mode change sequence:  
MODE1 MODE2 MODE3 MODE1  
If you turn off the power, the video mode will be back to initial state  
SCREEN SAVER  
(MODE1).  
The screen saver appears when you leave the DVD player in Stop mode  
for about five minutes. If the Screen Saver is displayed for five minutes,  
the DVD Player automatically turns itself off.  
TIP  
DETAILED DESCRIPTIONS FOR VIDEO MODES  
MODE1: The source material of the DVD video (film material or video  
material) is determined from disc information.  
MODE2: Suitable for playing film based content or video based material  
recorded by the progressive scan method.  
MODE3: Suitable for playing video based content with comparatively  
little motion.  
NOTE  
The video mode setting only works when the Progressive Scan mode  
is set to “On” in the Setup menu.  
SYSTEM SELECT  
You must select the appropriate system mode for your TV system. If NO  
DISC appears in the display window, press and hold PAUSE on the front  
panel for more than 5 seconds to be able to select a system  
(PAL, NTSC, or AUTO).  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
SPEAKER SETUP  
This chapter includes important reference information to help you set  
your DVD player.  
If you have connected the system to a speaker with a low frequency of  
100 Hz or below, select “Large.”  
SPEAKER SETUP  
Make the following settings for the built-in 5.1 channel surround  
decoder.  
If you have connected the system to a speaker without a low frequency  
of 100 Hz or below, select  
“Small.” If you have not connected a subwoofer, always select “Large”  
for Front speakers (L/R).  
1
Press SETUP. The setup menu appears.  
AUDIO  
When you do not have a certain speaker connected, select “None.”  
Front L/R speakers size can be set to “Large” or “Small.”  
Speaker  
Size  
Front L  
Large  
0
If Front L/R speakers size is set to “Small,” Rear and Centre speakers  
size can be set to “Small” or “None.”  
dB  
Volume  
Distance  
Test  
m(ft)  
0.6(2)  
Off  
Subwoofers size can be set only to “Large” or “None”.  
Select  
Move  
Return  
Enter  
VOLUME  
Press  
to adjust the output level of the selected speaker.  
2
3
Use  
to select the AUDIO option then press 4 to move to the  
(-10dB - 0dB)  
second level.  
Use  
to select the Speaker Setup option then press  
to move  
DISTANCE  
to the third level. “Select” is highlighted.  
If you connected speakers to your DVD Player, setting the Distance lets  
the speakers know how far the sound has to travel to reach your set  
listening point. This allows the sound from each speaker to reach the  
listener at the same time.  
4
5
6
7
Press ENTER and the 5.1 Speaker Setup menu appears.  
Use  
to select the desired speaker.  
buttons.  
Adjust options using  
Press ENTER to confirm your selection. Returns to the previous  
menu.  
Press  
to adjust the Distance of the selected speaker.  
[0.3(1)m(ft) - 6.0(20)m(ft)]  
SPEAKER SELECTION  
TEST  
Select a speaker that you want to adjust. (Front speakers (Left), Centre  
Speaker, Front speakers (Right), Rear speakers (Right), Rear speakers  
(Left), or SubWoofer).  
Press  
to test the signals of each speaker. Adjust the volume to  
match the volume of test signals memorized in the system.  
Front Left (L) Center Front Right (R)  
Rear Left (R) Rear Right (L) SubWoofer  
SIZE  
You can adjust the volume during operating the test tone, first use  
Press  
to set a mode. (Large, Small or None)  
buttons to select Volume or Speaker option, then use the  
to select volume or speaker, so that the volume of all speakers is the  
same from the listeners position.  
buttons  
If you adjust the volume while operating the test tone, the test tone will  
be held paused in the current speaker channel.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reference  
TROUBLESHOOTING  
Check the following guide for the possible cause of a problem before contacting service.  
SYMPTOM  
CAUSE  
CORRECTION  
The power cord is disconnected.  
Plug the power cord securely into the mains  
socket.  
No power.  
No disc is inserted.  
Insert a disc. (Check that the DVD or, audio CD  
indicator in the display window is lit.)  
The power is on, but the DVD player does not  
work.  
The TV is not set to receive DVD signal output.  
The video cable is not connected securely.  
Select the appropriate video input mode on the  
TV.  
No picture.  
No sound.  
Connect the video cable securely.  
The equipment connected with the audio cable  
is not set to receive DVD signal output.  
Select the correct input mode of the audio  
receiver so you can listen to the sound from the  
DVD player.  
The power of the equipment connected with the  
audio cable is turned off.  
Turn on the equipment connected with the  
audio cable.  
The AUDIO options are set to the wrong  
position.  
Set the Digital Audio Output to the correct  
position, then turn on the DVD player again by  
pressing POWER.  
An unplayable disc is inserted.  
The rating level is set.  
Insert a playable disc. (Check the disc type, color  
system, and regional code.)  
The DVD player does not start playback.  
The remote control does not work properly.  
Cancel the rating function or change the rating  
level.  
The remote control is not pointed at the remote  
sensor on the DVD player.  
Point the remote control at the remote sensor of  
the DVD player.  
The remote control is too far from the DVD  
player.  
Operate the remote control closer to the DVD  
player.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reference  
TABLE OF LANGUAGES AND THEIR CODES  
Language Code List  
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.  
Code Language  
6566 Abkhazian  
6565 Afar  
Code Language  
7074 Fiji  
Code Language  
7678 Lingala  
Code Language  
8373 Singhalese  
8375 Slovak  
8376 Slovenian  
8379 Somali  
6983 Spanish  
8385 Sudanese  
8387 Swahili  
8386 Swedish  
8476 Tagalog  
8471 Tajik  
7073 Finnish  
7082 French  
7089 Frisian  
7684 Lithuanian  
7775 Macedonian  
7771 Malagasy  
7783 Malay  
6570 Afrikaans  
8381 Albanian  
6577 Ameharic  
6582 Arabic  
7176 Galician  
7565 Georgian  
6869 German  
6976 Greek  
7776 Malayalam  
7784 Maltese  
7773 Maori  
7289 Armenian  
6583 Assamese  
6588 Aymara  
6590 Azerbaijani  
6665 Bashkir  
6985 Basque  
6678 Bengali; Bangla  
6890 Bhutani  
6672 Bihari  
7576 Greenlandic  
7178 Guarani  
7185 Gujarati  
7265 Hausa  
7782 Marathi  
7779 Moldavian  
7778 Mongolian  
7865 Nauru  
8465 Tamil  
8484 Tatar  
7387 Hebrew  
7273 Hindi  
7869 Nepali  
8469 Telugu  
8472 Thai  
7879 Norwegian  
7982 Oriya  
7285 Hungarian  
7383 Icelandic  
7378 Indonesian  
7365 Interlingua  
7165 Irish  
6679 Tibetan  
8473 Tigrinya  
8479 Tonga  
8482 Turkish  
8475 Turkmen  
8487 Twi  
6682 Breton  
8065 Panjabi  
6671 Bulgarian  
7789 Burmese  
6669 Byelorussian  
7577 Cambodian  
6765 Catalan  
9072 Chinese  
6779 Corsican  
7282 Croatian  
6783 Czech  
8083 Pashto, Pushto  
7065 Persian  
8076 Polish  
7384 Italian  
8084 Portuguese  
8185 Quechua  
8277 Rhaeto-Romance  
8279 Rumanian  
8285 Russian  
7465 Japanese  
7487 Javanese  
7578 Kannada  
7583 Kashmiri  
7575 Kazakh  
7589 Kirghiz  
7579 Korean  
7585 Kurdish  
7679 Laothian  
7665 Latin  
8575 Ukrainian  
8582 Urdu  
8590 Uzbek  
8673 Vietnamese  
8679 Volapük  
6789 Welsh  
8779 Wolof  
8872 Xhosa  
7473 Yiddish  
8979 Yoruba  
9085 Zulu  
8377 Samoan  
8365 Sanskrit  
7168 Scots Gaelic  
8382 Serbian  
6865 Danish  
7876 Dutch  
6978 English  
6979 Esperanto  
6984 Estonian  
7079 Faroese  
8372 Serbo-Croatian  
8378 Shona  
7686 Latvian, Lettish  
8368 Sindhi  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reference  
COUNTRY CODE LIST  
Choose a country code from this list.  
Code Country  
Code Country  
Code Country  
Code Country  
AD Andorra  
ER  
ES  
ET  
FI  
Eritrea  
LC  
LI  
Saint Lucia  
Liechtenstein  
Sri Lanka  
Liberia  
SC  
SD  
SE  
SG  
SH  
SI  
Seychelles  
Sudan  
AE  
AF  
United Arab Emirates  
Afghanistan  
Spain  
Ethiopia  
Finland  
Fiji  
LK  
LR  
LS  
LT  
Sweden  
AG Antigua and Barbuda  
Singapore  
Saint Helena  
Slovenia  
AI  
Anguilla  
Albania  
FJ  
Lesotho  
AL  
FK  
Falkland Islands  
Lithuania  
Luxembourg  
Latvia Islands  
Libya  
AM Armenia  
FM Micronesia  
LU  
LV  
LY  
SJ  
Svalbard and  
Jan Mayen  
Slovak Republic  
Sierra Leone  
AN Netherlands Antilles  
AO Angola  
FO  
FR  
FX  
Faroe Islands  
France  
SK  
SL  
AQ Antarctica  
France (European  
Territory)  
MA Morocco  
AR  
AS  
AT  
Argentina  
MC Monaco  
SM San Marino  
American Samoa  
Austria  
GA Gabon  
MD Moldavia  
SN  
SO  
SR  
ST  
Senegal  
GB  
Great Britain  
MG Madagascar  
MH Marshall Islands  
MK Macedonia  
ML Mali  
Somalia  
AU Australia  
AW Aruba  
GD Grenada  
Suriname  
GE  
GF  
Georgia  
Saint Tome and Principe  
Former USSR  
El Salvador  
Syria  
AZ  
BA  
BB  
BD  
BE  
BF  
Azerbaidjan  
French Guyana  
SU  
SV  
SY  
SZ  
Bosnia-Herzegovina  
Barbados  
Bangladesh  
Belgium  
GH Ghana  
MM Myanmar  
MN Mongolia  
MO Macau  
GI  
Gibraltar  
GL  
Greenland  
Swaziland  
Turks and Caicos Islands  
Chad  
GM Gambia  
GN Guinea  
MP Northern Mariana Islands  
MQ Martinique (French)  
MR Mauritania  
MS Montserrat  
MT Malta  
TC  
TD  
TF  
Burkina Faso  
Bulgaria  
BG  
BH  
BI  
GP  
Guadeloupe (French)  
French Southern  
Territories  
Bahrain  
GQ Equatorial Guinea  
Burundi  
GR  
GS  
Greece  
TG  
TH  
TJ  
Togo  
BJ  
Benin  
S. Georgia &  
S. Sandwich Isls.  
Guatemala  
MU Mauritius  
Thailand  
BM Bermuda  
MV Maldives  
Tadjikistan  
Tokelau  
BN  
BO  
BR  
BS  
BT  
BV  
Brunei Darussalam  
GT  
MW Malawi  
TK  
Bolivia  
GU Guam (USA)  
GW Guinea Bissau  
GY Guyana  
MX Mexico  
TM Turkmenistan  
Brazil  
MY Malaysia  
TN  
TO  
TP  
TR  
TT  
TV  
Tunisia  
Bahamas  
Bhutan  
MZ Mozambique  
NA Namibia  
Tonga  
HK  
Hong Kong  
East Timor  
Turkey  
Bouvet Island  
HM Heard and McDonald  
Islands  
NC New Caledonia (French)  
BW Botswana  
NE  
NF  
Niger  
Trinidad and Tobago  
Tuvalu  
BY  
BZ  
Belarus  
Belize  
HN Honduras  
Norfolk Island  
HR  
HT  
Croatia  
Haiti  
NG Nigeria  
TW Taiwan  
TZ Tanzania  
CA Canada  
NI  
Nicaragua  
Netherlands  
CC Cocos (Keeling) Islands  
HU Hungary  
NL  
UA Ukraine  
UG Uganda  
CF  
Central African Republic  
ID  
IE  
Indonesia  
Ireland  
Israel  
NO Norway  
CG Congo  
NP  
NR  
Nepal  
Nauru  
UK  
United Kingdom  
CH Switzerland  
IL  
UM USA Minor Outlying  
Islands  
CI  
CK  
CL  
Ivory Coast  
Cook Islands  
Chile  
IN  
IO  
India  
NU Niue  
British Indian Ocean  
Territory  
Iraq  
NZ  
New Zealand  
US  
UY  
UZ  
VA  
VC  
United States  
Uruguay  
OM Oman  
CM Cameroon  
CN China  
IQ  
IR  
PA  
PE  
PF  
Panama  
Uzbekistan  
Iran  
Peru  
Vatican City State  
Saint Vincent &  
Grenadines  
CO Colombia  
IS  
Iceland  
Italy  
Polynesia (French)  
Papua New Guinea  
Philippines  
Pakistan  
CR  
CS  
Costa Rica  
IT  
PG  
PH  
PK  
PL  
Former Czechoslovakia  
JM  
JO  
JP  
Jamaica  
Jordan  
Japan  
VE  
Venezuela  
CU Cuba  
VG Virgin Islands (British)  
CV  
CX  
CY  
CZ  
DE  
DJ  
Cape Verde  
Poland  
VI  
Virgin Islands (USA)  
Vietnam  
Christmas Island  
Cyprus  
KE  
Kenya  
PM Saint Pierre and Miquelon  
VN  
VU  
KG Kyrgyzstan  
PN  
PR  
PT  
Pitcairn Island  
Puerto Rico  
Portugal  
Vanuatu  
Czech Republic  
Germany  
KH  
KI  
Cambodia6  
Kiribati  
WF Wallis and Futuna Islands  
WS Samoa  
Djibouti  
KM Comoros  
PW Palau  
YE  
YT  
YU  
ZA  
Yemen  
DK  
Denmark  
KN  
KP  
KR  
Saint Kitts & Nevis Anguilla  
PY  
Paraguay  
Mayotte  
DM Dominica  
North Korea  
South Korea  
QA Qatar  
Yugoslavia  
South Africa  
DO Dominican Republic  
RE  
RO  
RU  
Reunion (French)  
DZ  
EC  
EE  
Algeria  
KW Kuwait  
Romania  
ZM Zambia  
ZR Zaire  
ZW Zimbabwe  
Ecuador  
Estonia  
KY  
KZ  
LA  
LB  
Cayman Islands  
Russian Federation  
Kazakhstan  
Laos  
RW Rwanda  
EG  
EH  
Egypt  
SA  
SB  
Saudi Arabia  
Solomon Islands  
Western Sahara  
Lebanon  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reference  
SPECIFICATIONS  
GENERAL  
Power requirements  
Power consumption  
Dimensions (approx.)  
Weight (approx.)  
AC 110-240 V, 50/60 Hz  
12 W  
430 x 39 x 242 mm (W x H x D) without foot  
2.2 kg  
Operating temperature  
Operating humidity  
5 °C to 35 °C (41 °F to 95 °F)  
5 % to 90 %  
SYSTEM  
Laser  
Signal system  
Semiconductor laser, wavelength 650 nm  
PAL/NTSC  
Frequency response  
DVD (PCM 96 kHz): 8 Hz to 44 kHz  
DVD (PCM 48 kHz): 8 Hz to 22 kHz  
CD: 8 Hz to 20 kHz  
Signal-to-noise ratio  
Harmonic distortion  
Dynamic range  
More than 100 dB (ANALOG OUT connectors only)  
Less than 0.008%  
More than 90 dB (DVD/CD)  
OUTPUTS  
VIDEO OUT  
1 Vp-p 75 , sync negative, RCA jack x 1 /SCART (TO TV)  
(Y) 1.0 V (p-p), 75 , negative sync, Mini DIN 4-pin x 1  
(C) 0.3 V (p-p) 75 Ω  
S-VIDEO OUT  
COMPONENT VIDEO OUT  
(Y) 1.0 V (p-p), 75 , negative sync, RCA jack x 1  
(Cb/Pb)/(Cr/Pr) 0.7 V (p-p), 75 , RCA jack x 2  
2.0 Vrms (1 KHz, 0 dB), 600 , RCA jack (L, R) x 1 /SCART (TO TV)  
0.5 V (p-p), 75 , RCA jack x 1  
AUDIO OUT  
DIGITAL OUT (COAXIAL)  
DIGITAL OUT (OPTICAL)  
3 V (p-p), 75 , Optical Connector x 1  
ACCESSORIES  
Video cable  
Audio cable  
Remote control  
Batteries  
1
1
1
2
Note: Design and specifications are subject to change prior notice.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
©2004 NAD ELECTRONICS INTERNATIONAL  
A DIVISION OF LENBROOK INDUSTRIES LIMITED  
All rights reserved. No part of this publication may be reproduced, stored or transmitted in any form without the written permission of NAD Electronics International  
T 524 Manual C Version 12/04  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Milwaukee Grinder 0725 20 User Manual
Milwaukee Grinder Bench Grinder User Manual
MTD Lawn Mower 112 060 120 User Manual
National Instruments Network Card 374318A 01 User Manual
NeumannBerlin Microphone Condenser Microohone User Manual
Nilfisk ALTO Vacuum Cleaner BK 800 User Manual
NuTone Fan HD50NT User Manual
Onkyo Indoor Furnishings 29344872 User Manual
Oreck Vacuum Cleaner 2005HH User Manual
Panasonic Answering Machine kx t123211d User Manual