®
T514
DVD / CD / MP3 Player
Owner’s Manual
Manuel de l'utilisateur
Bedienungsanleitung
Gebruikershandleiding
Manual del Usuario
Manuale delle Istruzioni
Manual do Proprietário
Bruksanvisning
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
TABLE OF CONTENTS
INTRODUCTION
OPERATION
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Symbol used in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
About the ( ) Symbol Display . . . . . . . . . . . . . . . . . . . . . . . . . .4
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Types of Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Disc-related terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Front Panel and Display Window . . . . . . . . . . . . . . . . . . . . . . . . .7
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Operation with DVD and Video CD . . . . . . . . . . . . . . . . . . . . . . .17
Playing a DVD or Video CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Special DVD Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Operation with Audio CD and MP3 / WMA Disc . . . . . . . . . . . .20
Playing an Audio CD or MP3/WMA Disc . . . . . . . . . . . . . . . . . . .20
Audio CD and MP3 / WMA Disc Features . . . . . . . . . . . . . . . . . .21
Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Operation with JPEG Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Viewing a JPEG Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Operation with a DVD VR format Disc . . . . . . . . . . . . . . . . . . . .24
Maintenance and Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Additional Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
INSTALLATION AND SETUP
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Setting up the Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
DVD Player Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Audio Connection to Optional Equipment . . . . . . . . . . . . . . . . .11
Before operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
On-Screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
AUDIO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
LOCK (Parental Control) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
REFERENCE
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Table of Languages and their Codes . . . . . . . . . . . . . . . . . . . . . .27
Country Codes List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
BEFORE USE
ABOUT THE
SYMBOL DISPLAY
To ensure proper use of this product, please read this owner’s manual
carefully and retain for future reference.
“
” may appear on your TV display during operation and indicates
that the function explained in this owner’s manual is not available on
that specific DVD video disc.
This manual provides information on the operation and maintenance of
your DVD player. Should the unit require service, contact an authorized
service location.
NOTES ON DISCS
HANDLING DISCS
SYMBOL USED IN THIS MANUAL
Do not touch the playback side of the disc. Hold the disc by the edges
so that fingerprints do not get on the surface. Never stick paper or tape
on the disc.
The lightning flash symbol alerts you to the presence of
dangerous voltage within the product enclosure that may
constitute a risk of electric shock.
The exclamation mark alerts you to the presence of important
operating and maintenance / servicing instructions.
Indicates hazards likely to cause harm to the unit itself or other
material damage.
STORING DISCS
After playing, store the disc in its case. Do not expose the disc to direct
sunlight or sources of heat and never leave it in a parked car exposed to
direct sunlight.
NOTE:
Indicates special notes and operating features.
TIP:
CLEANING DISCS
Indicates tips and hints for making the task easier.
Fingerprints and dust on the disc can cause poor picture quality and
sound distortion. Before playing, clean the disc with a clean cloth. Wipe
the disc from the centre out.
A section whose title has one of the following symbols is applicable only
to the disc represented by the symbol.
DVD-V
VCD
CD
DVD and finalized DVD R/RW
Video CDs
Audio CDs
MP3
WMA
JPEG
MP3 Discs
WMA Discs
JPEG Discs
Do not use strong solvents such as alcohol, benzine, thinner,
commercially available cleaners, or anti-static spray intended for older
vinyl records.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
BEFORE USE
TYPES OF PLAYABLE DISCS
REGIONAL CODE
DVD
This DVD player is designed and manufactured for playback
of region “2” encoded DVD software. This unit can play only
DVD discs labeled “2” or “ALL”.
(8 cm / 12 cm disc)
2
Video CD (VCD)
(8 cm / 12 cm disc)
NOTES ON REGIONAL CODES
•
Most DVD discs have a globe with one or more numbers in it clearly
visible on the cover. This number must match your DVD player’s
regional code or the disc cannot play.
Audio CD
(8 cm / 12 cm disc)
•
If you try to play a DVD with a different region code from your
player, the message “Check Regional Code” appears on the TV
screen.
In addition, this unit plays DVD -R, DVD +R, DVD -RW,
DVD +RW, SVCD and CD-R / CD-RW that contains audio titles, MP3,
WMA, and/or JPEG files.
This indicates a product feature that is capable of playing
DVD-RW discs recorded with Video Recording format.
NOTES
•
Depending on the conditions of the recording equipment or the
CD-R/RW (or DVD -R, DVD +R, DVD -RW, DVD +RW) disc itself, some
CD-R/RW (or DVD -R, DVD +R, DVD -RW, DVD +RW) discs cannot
be played on the unit.
•
•
Do not attach any seal or label to either side (the labelled side or the
recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart- shaped or octagonal)
since they may result in malfunctions.
NOTES ON DVDS AND VIDEO CDS
Some playback operations of DVDs and Video CDs may be intentionally
programmed by software manufacturers. This unit plays DVDs and
Video CDs according to disc content designed by the software
manufacturer, therefore some playback features may not be available or
other functions may be added.
MANUFACTURED UNDER LICENCE FROM DOLBY LABORATORIES.
“DOLBY”, “PRO LOGIC”, “MLP LOSSLESS”, AND THE DOUBLE-D
SYMBOL ARE TRADEMARKS OF DOLBY LABORATORIES.
DTS AND DTS DIGITAL OUT ARE TRADEMARKS OF DIGITAL
THEATER SYSTEMS, INC.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
BEFORE USE
DISC-RELATED TERMS
PBC: PLAYBACK CONTROL (VIDEO CD ONLY)
Playback control is available for Video CD (VCD) version 2.0 disc
formats. PBC allows you to interact with the system via menus, search
functions, or other typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are included in the disc.
Video CDs not equipped with PBC (Version 1.1) operate in the same
way as audio CDs.
DVD R / DVD RW
DVD -R and DVD +R are two different standards for recordable DVD
drives and discs. This format allows information to be recorded onto the
DVD disc only once. DVD +RW and DVD -RW are two standards for
re-writable media, meaning the DVD content can be erased and
re-recorded. Single-sided discs can hold 4.38 Gigabytes and double-
sided discs hold twice as much. There are no dual layer single sided
recordable discs.
TITLE (DVD VIDEO DISCS ONLY)
A title is generally a distinct section of a DVD disc. For example the main
feature could be title 1, a documentary describing how the film was
made could be title 2, and cast interviews could be title 3. Each title is
assigned a reference number enabling you to locate it easily.
VCD (VIDEO CD)
A VCD holds up to 74 minutes (650 MB disc) or 80 minutes (700 MB
disc) of MPEG-1 full-motion video along with quality stereo sound.
CHAPTER (DVD VIDEO DISCS ONLY)
MPEG
A chapter is a segment of a title such as a scene in a film or one
interview in a series. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending on the disc,
chapters may not be recorded.
MPEG is an international standard for video and audio compression.
MPEG-1 is used in encoding video for VCD and provides for
multichannel surround sound coding such as PCM, Dolby Digital, DTS
and MPEG audio.
SCENE (VCD)
MP3
On a video CD with PBC (playback control) functions, moving pictures
and still pictures are divided into sections called “scenes”. Each scene is
displayed in the menu screen and assigned a scene number, enabling
you to locate the scene you want. A scene is composed of one or several
tracks.
MP3 is a popular compression format used for digital audio files that
yields very high near-CD quality.
WMA
Windows media audio file. A type of coding / decoding developed by
Microsoft Corp.
TRACK
A distinct element of audiovisual information, such as the picture or
sound track for a specific language (DVD), or a musical piece on a
video or audio CD. Each track is assigned a track number, enabling
you to locate the track you want. DVD discs allow one track of video
(with multiple angles) and several tracks of audio.
JPEG
Joint Pictures Expert Group. JPEG is a compressed file format that allows
you to save images with no limit on the number of colors.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
FRONT PANEL AND DISPLAY WINDOW
Front Panel
POWER
Switches the player ON and OFF.
Power indicator
PLAY
Starts playback.
PAUSE
Pause playback temporarily/press
repeatedly for frame-by-frame
playback.
STOP
Stops playback.
OPEN / CLOSE
Opens or closes the disc tray.
Disc Tray
Insert a disc here.
T514
SCAN (
/
)
Press for fast reverse search
or forward search.
Display window
Shows the current status
of the player.
SKIP (
)
Moves to PREVIOUS or
NEXT chapter/track.
Remote Sensor
Point the DVD Player remote control here.
Display Window
Indicates current player
function (Play, Pause)
DVD
DVD inserted
CD Audio CD inserted
Indicates repeat mode
VCD Video CD inserted
SVCD Super Video CD inserted
MP3 MP3 or WMA disc inserted
Indicates encoding DTS
and Dolby digital of the
current disc.
CHP/TRK
Indicates current chapter
or track number
Indicates total playing
time/elapsed time
S VCD DVD CHP
D
A
B
MP3
CD TRK
ALL
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
REAR PANEL
COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
AUDIO OUT (Left/Right)
Connect to an amplifier, receiver,
or stereo system.
AC Power Cord
Plug into the power source.
VIDEO OUT
Connect to a TV with video inputs.
SCART/RGB OUT
Connect to a TV with SCART jack.
12V TRIGGER IN
By connecting this DVD player to another NAD audio
component or system controller equipped with a 12V trigger
output, you can remotely operate the T514C power ON/OFF.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
Connect to a TV with Y Cb/Pb Cr/Pr inputs.
S-VIDEO OUT
Connect to a TV with S-Video inputs.
OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
REMOTE CONTROL
OFF
ON
Switches DVD Player OFF.
Switches DVD Player ON.
PROGRAM
ON
OFF
ANGLE
RANDOM
ZOOM
AUDIO
Enters to the program edit mode or exits from that.
Selects an audio language (DVD).
CLEAR
AUDIO
SUBTITLE
RPT A-B
CLEAR
Removes a track number on the program list or a mark
on the MARKER SEARCH menu.
SUBTITLE
Selects a subtitle language.
REPEAT
PROGRAM
MARKER
ZOOM
Enlarges video image.
ANGLE
Selects a DVD camera angle if available
0-9 number buttons
Selects numbered items in a menu.
REPEAT
Repeat chapter, track, title, all.
SEARCH RESOLUTION
RPT A-B
Repeat sequence.
SCAN (
/
)
Press for fast reverse search or forward search.
RANDOM
Plays tracks in random order.
1
4
7
2
5
8
3
6
9
MENU
Accesses menu on a DVD disc.
MARKER
Marks any point during playback.
RTN
SEARCH
Displays MARKER SEARCH menu.
Displays the menu of a video CD with PBC.
RESOLUTION
OPEN/CLOSE
Opens and closes the disc tray.
0
You can change the resolution depending on your TV
.
SLOW
SCAN
SLOW (
Reverse/ Forward slow playback.
/
)
SETUP
STOP (
Stops playback.
)
TITLE
PAUSE/STEP (
)
TITLE
MENU
Displays the discs Title menu, if available.
Pauses playback temporarily/ press repeatedly
for frame-by-frame playback.
SETUP
ENTER
Accesses or removes setup menu.
Reverse SKIP (
)
Go to beginning of current chapter or track or go
to previous chapter or track.
(left/right/up/down)
- Selects an item in the menu.
RTN
DISP
PLAY (
)
Starts playback.
OPEN/CLOSE
STOP
PLAY
PAUSE/STEP
ENTER
Forward SKIP (
Go to next chapter or track.
)
Acknowledges menu selection
SKIP
SKIP
DISP
Accesses On-Screen display
DVD 6
PLACE BATTERIES INTO OPENING. ENSURE
THE CORRECT POLARITY IS OBSERVED
REPLACE BATTERY COVER BY ALIGNING AND
INSERTING THE TWO TABS INTO THE HOLES.
PRESS IN AND LIFT TAB TO REMOVE
BATTERY COVER OUT FROM RECESS
PRESS BATTERY COVER INTO PLACE UNTIL IT
'CLICKS' CLOSED
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Setup
CONNECTIONS
SETTING UP THE PLAYER
Video and Audio Connections to Your TV
Make sure the DVD player is connected directly to the TV and not to a
VCR, otherwise the DVD image could be distorted by the copy
protection system.
The picture and sound of a nearby TV, VCR, or radio may be distorted
during playback. If this occurs, position the player away from the TV,
VCR, or radio, or turn off the unit after removing the disc.
Video
Connect the VIDEO OUT jack on the DVD player to the video in jack on
the TV using the video cable (V).
DVD PLAYER CONNECTIONS
Depending on your TV and other equipment there are various ways
you can connect the player. Please refer to the manuals of your TV,
stereo system or other devices as necessary for additional connection
information.
SCART connection
Connect the TO TV SCART jack on the DVD Player to the
corresponding in jacks on the TV using the SCART cable (T).
Component Video (Color Stream®)
Connect the COMPONENT VIDEO OUT/PROGRESSIVE SCAN jacks on
the DVD Player to the corresponding in jacks on the TV using an Y Pb
Pr cable (C).
Rear of TV
SCART INPUT
VIDEO
INPUT
COMPONENT VIDEO
PROGRESSIVE SCAN INPUT
/
AUDIO INPUT
Y
L
Pr
Pb
R
PROGRESSIVE SCAN (COLORSTREAM® PRO):
•
If your television is a high-definition or “digital ready” television, you
may take advantage of the DVD Player’s progressive scan output for
the highest video resolution possible.
C
A
V
T
•
If your TV does not accept the Progressive Scan format, the picture
will appear scrambled if you try Progressive Scan on the DVD Player.
NOTES
•
Set the Progressive to “On” on the setup menu for progressive
signal, see page 14.
•
Set the progressive to “Off” by removing any disc from the unit and
close the disc tray. see that “no disc” is displayed on the display
window. Then press STOP and hold it for five seconds before
releasing it.
Rear of DVD player
•
Progressive scan does not work with the analogue video connections
(yellow VIDEO OUT jack).
CAUTION
Audio Connection to Your TV:
You must set the TV Output Select option to use COMPONENT VIDEO
OUT/PROGRESSIVE SCAN and SCART jacks.
(See “TV Output Select” on page 14.)
Connect the left and right AUDIO OUT jacks of the DVD Player to the
audio left and right IN jacks on the TV (A) using the audio cables. Do
not connect the DVD Player’s AUDIO OUT jack to the Phono In jack
(record deck) of your audio system.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Setup
CONNECTIONS
AUDIO CONNECTION TO OPTIONAL EQUIPMENT
Amplifier equipped with 2-channel analogue stereo or Dolby Pro
Logic ll / Pro Logic
Connect the left and right AUDIO OUT jacks on the DVD player to the
audio left and right IN jacks on your amplifier, receiver, or stereo system,
using the audio cables (A).
Connect the DVD player to your optional equipment for audio output.
Rear of DVD player
Amplifier equipped with 2-channel digital stereo (PCM) or audio
/ video receiver equipped with a multi-channel decoder (Dolby
Digital™, MPEG 2, or DTS)
1
Connect one of the DVD Player’s DIGITAL AUDIO OUT jacks
(OPTICAL O or COAXIAL X) to the corresponding in jack on your
amplifier.
2
Use an optional digital (optical O or coaxial X) audio cable.
O
X
A
DIGITAL MULTI-CHANNEL SOUND
A digital multi-channel connection provides the best sound quality. For
this you need a multi-channel audio / video receiver that supports one
or more of the audio formats supported by your DVD player such as
MPEG 2, Dolby Digital and DTS. Check the receiver manual and the
logos on the front of the receiver.
L
R
OPTICAL
COAXIAL
DIGITAL INPUT
AUDIO INPUT
Amplifier (Receiver)
NOTES
•
•
•
If the audio format of the digital output does not match the
capabilities of your receiver, the receiver produces a strong, distorted
sound or no sound at all.
Six Channel Digital Surround Sound via a digital connection can only
be obtained if your receiver is equipped with a Digital Multi-channel
decoder.
To see the audio format of the current DVD in the on-screen display,
press AUDIO.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Setup
BEFORE OPERATION
Example: On-Screen Display during
playing DVD Video
ON-SCREEN DISPLAY
Items
Selection Method
, Numbers
ENTER
You can display the general playback status on the TV screen. Some
items can be changed using the menu. To use the on-screen display:
Title Number
1 / 3
1
2
3
Press DISPLAY during playback.
, Numbers
ENTER
Chapter Number
Time search
Press
Press
to select an item. The selected item is highlighted.
to change the setting. You can also use the number
1 / 12
Numbers, ENTER
buttons if appropriate (e.g. inputting the title number). For some
functions, press ENTER to execute the setting.
0:20:09
Audio language
and Digital Audio
Output mode
or
AUDIO
NOTES
•
•
Some discs may not provide all of the features shown below.
If no button is pressed for 10 seconds, the on-screen display
disappears.
or
Subtitle language
Angle
ABC
1 ENG
1 / 3
SUBTITLE
or
ANGLE
PLAYBACK STATUS/RESTRICTIONS
Sound
3D SUR
Title
Repeat title
A - B
Repeat sequence
Example: On-Screen Display during
playing VCD
1 / 9
Enter a Marker
MARKER SEARCH
Marker Search menu
Resume play from this point
Items
Selection Method
Action prohibited or not available
, Numbers
ENTER
Track Number
(or PBC mode)
1 / 3
Numbers
ENTER
Time search
0:20:09
or
AUDIO
Audio Channel
Sound
3D SUR
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Setup
BEFORE OPERATION
INITIAL SETTINGS
LANGUAGE
By using the Setup menu, you can make various adjustments to items
such as picture and sound. You can also set a language for the subtitles
and the Setup menu, among other things. For details on each Setup
menu item, see pages 13 to 16.
LANGUAGE
English
Original
Off
Menu Language
Disc Audio
Disc Subtitle
Disc Menu
Original
TO DISPLAY AND EXIT THE MENU:
Press SETUP to display the menu. A second press of SETUP will take you
back to initial screen.
Move
Select
To go to the next level:
Press
To go back to the previous level:
Press on the remote control.
on the remote control.
MENU LANGUAGE
Select a language for the Setup menu and on-screen display.
DVD-V
DISC AUDIO / SUBTITLE / MENU
GENERAL OPERATION
Select the language you prefer for the audio track (disc audio), subtitles,
and the disc menu.
1
2
Press SETUP. The Setup menu appears.
Use to select the desired option then press
to move to the
Original: Refers to the original language in which the disc was
second level. The screen shows the current setting for the selected
item, as well as alternate setting(s).
recorded.
3
4
5
Use
to the third level.
Use to select the desired setting then press ENTER to confirm
your selection. Some items require additional steps.
Press SETUP or PLAY to exit the Setup menu.
to select the second desired option then press
to move
Other: To select another language, press number buttons then ENTER
to enter the corresponding 4-digit number according to the language
code list in the reference chapter. If you enter the wrong language code,
press CLEAR.
DISPLAY
DISPLAY
TV Aspect
16
:
9
Wide
Display Mode
Progressive Scan
TV Output Select
Widescreen
Off
RGB
Move
Select
DVD-V
TV ASPECT
4:3: Select when a standard 4:3 TV is connected.
16:9 Wide: Select when a 16:9 wide TV is connected.
DVD-V
DISPLAY MODE
Display Mode setting works only when the TV Aspect mode is
set to “4:3”.
Letterbox: Displays a wide picture with bands on the upper and lower
portions of the screen.
Panscan: Automatically displays the wide picture on the entire screen
and cuts off the portions that do not fit.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Setup
BEFORE OPERATION
PROGRESSIVE SCAN
TV OUTPUT SELECT
Progressive Scan Video provides the highest quality pictures with less
flickering.
Set the player’s TV Output Select options according to the TV
connection type.
If you are using the Component Video jacks for connection to a TV or
monitor that is compatible with a progressive scan signal, set Progressive
Scan to On.
YPbPr: When your TV is connected with the COMPONENT VIDEO
OUT/PROGRESSIVE SCAN jacks on the DVD player.
RGB: When your TV is connected with the SCART (RGB signal) jack.
TO TURN ON PROGRESSIVE SCAN:
Connect Component out of the DVD to the input of your
monitor/television, set your television or monitor to Component Input.
AUDIO
1
Select “Progressive Scan” on the DISPLAY menu then press
.
Each DVD disc has a variety of audio output options. Set the player’s
AUDIO options according to the type of audio system you use.
DISPLAY
TV Aspect
Display Mode
AUDIO
Progressive Scan
TV Output Select
On
Off
Dolby Digital
DTS
Bitstream
Bitstream
PCM
MPEG
Sample Freq.
DRC
48 kHz
On
Prev.
Move
Enter
Move
Select
Progressive Scan On was selected.
Press 'Enter' to confirm.
DVD
DOLBY DIGITAL / DTS / MPEG
Enter
Cancel
BITSTREAM: Select “Bitstream” if you connect the DVD Player’s
DIGITAL OUT jack to an amplifier or other equipment with a Dolby
Digital, DTS or MPEG decoder.
2
3
Select “On” using the
Press ENTER to confirm your selection. The confirm menu will
appear.
buttons.
PCM (FOR DOLBY DIGITAL / MPEG): Select when connected
to a two-channel digital stereo amplifier. DVDs encoded in Dolby
Digital or MPEG will be automatically downmixed to two-channel
PCM audio.
NOTE
If your TV does not accept the Progressive Scan format, the picture
will appear scrambled if you try Progressive Scan on the DVD Player.
4
5
When the confirm menu appears on your screen Cancel is
OFF (FOR DTS): If you select “Off”, the DTS signal is not output
through the DIGITAL OUT jack.
highlighted as default. Use the
buttons to highlight Enter.
Pressing ENTER will set the player to Progressive scan mode.
DVD-V
SAMPLE FREQ. (FREQUENCY)
If your receiver or amplifier is NOT capable of handling 96 kHz
signals, select 48 kHz. When this choice is made, this unit
automatically converts any 96 kHz signals to 48 kHz so your system
can decode them.
If your receiver or amplifier is capable of handling 96 kHz signals,
select 96 kHz. When this choice is made, this unit passes each type
of signal through without any further processing.
CAUTION
Once the setting for progressive scan output is entered, an image will
only be visible on a progressive scan compatible TV or monitor. If you set
Progressive Scan to On in error, you must reset the unit. First, remove the
disc in the DVD Player. Next, press STOP ( ) and hold it for five seconds
before releasing it. The video output will be restored to the standard
setting, and a picture will once again be visible on a conventional
analogue TV or monitor.
Check the documentation for your amplifier to verify its capabilities.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Setup
BEFORE OPERATION
DYNAMIC RANGE CONTROL (DRC)
DVD-V
B.L.E. (BLACK LEVEL EXPANSION)
With the DVD format, you can hear a program’s soundtrack in the
most accurate and realistic presentation possible, thanks to digital
audio technology. However, you may wish to compress the dynamic
range of the audio output (the difference between the loudest
sounds and the quietest ones). This allows you to listen to a movie
at a lower volume without losing clarity of sound. Set DRC to On
for this effect.
To select the black level of playback pictures. Set your preference and
monitor’s ability.
On: Expanded grey scale. (0 IRE cut off)
Off: Standard grey scale. (7.5 IRE cut off)
NOTE
The B.L.E. function works on NTSC systems only.
OTHERS
The PBC, Auto Play, B.L.E. settings can be changed.
OTHERS
PBC
On
Off
On
Auto Play
B.L.E.
Select
Move
VCD
Set Playback Control (PBC) to On or Off.
PBC
On: Video CDs with PBC are played according to the PBC.
Off: Video CDs with PBC are played the same way as Audio CDs.
DVD-V
AUTO PLAY
You can set up the DVD Player so a DVD disc automatically starts
playing whenever the DVD is inserted.
If Auto Play mode is set to On, this DVD player will search for the title
that has the longest playback time and then play back the title
automatically.
On: Auto Play function is active.
Off: Auto Play function is not active.
NOTE
The Auto Play function may not work for some DVDs.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Setup
BEFORE OPERATION
LOCK (PARENTAL CONTROL)
PASSWORD (SECURITY CODE)
You can enter or change password.
LOCK
1
2
Select Password on the LOCK menu then press
Follow step 2 as shown left (Rating). “Change” or “New” is
highlighted.
.
Rating
Unlock
Password
Country Code
New
UK
3
4
Enter the new 4-digit code, then press ENTER. Input it again to verify.
Press SETUP to exit the menu.
If you forget your Security Code
Move
Select
If you forget your security code you can clear it using the following
steps:
DVD-V
RATING
1
2
3
Press SETUP to display the Setup menu.
Input the 6-digit number “210499” and the security code is cleared.
Enter a new code as described above.
Some movies contain scenes that may not be suitable for children to
view. Many of these discs contain parental control information that
applies to the complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the country. Some
discs offer more suitable scenes as an alternative.
DVD-V
COUNTRY CODE
Enter the code of the country/area whose standards were used to
rate the DVD video disc, based on the list in the reference chapter.
The parental control feature allows you to block access to scenes
below the rating you input, thereby preventing your children from
being able to view material you believe is unsuitable.
1
2
3
4
5
Select “Country Code” on the LOCK menu then press
Follow step 2 as shown in the left column (Rating).
.
Select the first character using
buttons.
Press ENTER and select the second character using
Press ENTER to confirm your country code selection.
buttons.
1
2
Select “Rating” on the LOCK menu then press
.
To access the Rating, Password and Country Code features, you
must input the 4-digit security code you created. If you have not yet
entered a security code you are prompted to do so.
Input a 4-digit code and press ENTER. Enter it again and press ENTER
to verify. If you make a mistake before pressing ENTER, press CLEAR.
3
Select a rating from 1 to 8 using the
buttons.
Rating 1-8
Rating one (1) has the most restrictions and rating eight (8) is the
least restrictive
Unlock
If you select unlock, parental control is not active and the disc plays
in full.
NOTE
If you set a rating for the player, all disc scenes with the same
rating or lower are played. Higher rated scenes are not played
unless an alternate scene is available on the disc. The alternative
must have a lower rating. If no suitable alternative is found,
playback stops. You must enter the 4-digit password or change
the rating level in order to play the disc.
4
Press ENTER to confirm your rating selection, then press SETUP to
exit the menu.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
OPERATION WITH DVD AND VIDEO CD
PLAYING A DVD OR VIDEO CD
PLAYBACK SETUP
GENERAL FEATURES
NOTES
You can enter or change password.
Unless stated otherwise, all operations described use the remote
control. Some features may also be available on the Setup menu.
1
2
3
4
Turn on the TV and select the video input source connected to the
DVD player.
Turn on the audio system (if applicable) and select the input source
connected to the DVD player.
Press OPEN/CLOSE to open the disc tray and load your chosen disc
in the tray, with the playback side down.
Press OPEN/CLOSE to close the tray. Playback starts automatically. If
playback does not start, press PLAY.
DVD-V
MOVING TO ANOTHER TITLE/GROUP
When a disc has more than one title/group, you can move to another
title/group. Press DISPLAY while playback is stopped then the
appropriate number (0-9) or use
to move to another
title/group. You can play any title by inputting its number while
playback is stopped.
In some cases, the disc menu might appear instead:
MOVING TO ANOTHER CHAPTER/TRACK
DVD-V
DVD-V
VCD
Use the
buttons to select the title/chapter you want to
When a title on a disc has more than one chapter or a disc has more
than one track, you can move to another chapter/track as follows:
view, then press ENTER to start.
Press TITLE or DVD MENU to return to the menu screen.
•
Press SKIP
or
briefly during playback to select the next
chapter/track or to return to the beginning of the current
chapter/track.
VCD
•
•
Press SKIP
chapter/track.
twice briefly to step back to the previous
Use the number buttons to select the track you want to view and
press RETURN to return to the menu screen. Menu settings and
operating procedures may differ. Follow the instructions on the each
menu screen. You also may set PBC to Off (See “PBC” on page 15).
To go directly to any chapter during DVD playback, press DISPLAY
and press to select the chapter/track icon. Then, input the
chapter/track number or use
.
DVD-V
VCD
NOTES
SEARCH
•
If parental control is set and the disc is not within the rating settings
you must input the password. (See “Lock Menu” on page 16.)
DVDs may have a region code. Your player will not play discs that
have a region code different from your player. The region code for
this player is 2 (two).
1
2
Press SCAN (
Press SCAN (
or
or
) during playback..
) repeatedly to select the required speed.
•
DVD, X2, X4, X16 or X100
Video CD; X2, X4 or X8
3
To exit SEARCH mode, press PLAY.
VCD
CHANGING THE AUDIO CHANNEL
Press AUDIO repeatedly during playback to hear a different audio
channel (Stereo, Left, or Right).
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
OPERATION WITH DVD AND VIDEO CD
STILL PICTURE AND FRAME-BY-FRAME PLAYBACK
DVD-V
VCD
REPEAT
You can play a title/chapter/all/track/group on a disc. Press REPEAT
during playback to select a desired repeat mode.
DVD-V
VCD
1
Press PAUSE/STEP on the remote control during playback. Advance
the picture frame-by-frame by pressing PAUSE/STEP repeatedly.
To exit still motion mode, press PLAY.
DVD VIDEO DISCS - REPEAT CHAPTER/TITLE/OFF
2
1
2
3
Chapter: repeats the current chapter.
Title: repeats the current title.
Off: does not play repeatedly.
DVD-V
VCD
SLOW MOTION
1
Press PAUSE/STEP ( ) during playback.
The DVD player will now go into PAUSE mode.
VIDEO CDS, - REPEAT TRACK/ALL/OFF
2
Use the SCAN (
1/8,
1/4, or
or
1/4, or
1/2 (forward).
) to select the required speed:
1/2 (backward), or 1/16,
1/ 16,
1/8,
1
2
3
Track: repeats the current track
All: repeats all the tracks on a disc.
Off: does not play repeatedly.
With Video CD, the Slow speed changes:
or 1/2 (forward).
To exit Slow Motion mode, press PLAY ( ).
1/16,
1/8,
1/4
NOTES
3
•
On a Video CD with PBC, you must set PBC to Off on the setup
menu to use the repeat function (See “PBC” on page 15).
If you press SKIP ( ) once during Repeat Chapter (Track) playback,
the repeat playback cancels.
NOTE
•
•
Slow motion playback in reverse is not possible with Video CDs.
VCD
DVD-V
VCD
RANDOM
3D SURROUND
1
Press RANDOM during playback. The unit automatically begins
random playback and RANDOM appears on the TV screen.
Press RANDOM again to return to normal.
To produce a 3D surround effect that simulates multi- channel audio
from two stereo speakers (instead of the five+ speakers normally
required for multi-channel audio from a home theatre system).
2
1
2
Press DISPLAY during playback.
Use to select the sound option.
The sound option will be highlighted.
Use to select “3D SUR”.
To turn off the 3D Surround effect, select “Normal”.
TIP
By pressing SKIP
another title (track) and resumes random playback.
during random playback, the unit selects
3
NOTE
DVD-V
VCD
On a Video CD with PBC, You must set PBC to Off on the setup menu
to use the random function
TIME SEARCH
To start playing at any chosen time on the disc:
(See “PBC” on page 15).
1
Press DISPLAY during playback. The time search box shows the
elapsed playing time.
DVD-V
VCD
REPEAT A-B
To repeat a sequence.
2
3
Press
to select the time clock icon and “-:--:--” appears.
Input the required start time in hours, minutes, and seconds from
left to right. If you enter the wrong numbers, press CLEAR to remove
the numbers you entered. Then input the correct numbers.
Press ENTER to confirm. Playback starts from the selected time.
1
2
3
Press A-B at your chosen starting point. “ A * ” appears briefly on
the TV screen.
Press A-B again at your chosen end point. “A B” appears briefly on
the TV screen and the repeat sequence begins.
Press A-B again to cancel.
4
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
OPERATION WITH DVD AND VIDEO CD
DVD-V
VCD
SPECIAL DVD FEATURES
ZOOM
Use zoom to enlarge the video image.
CHECKING THE CONTENTS OF DVD DISCS: MENUS
DVDs may offer menus that allow you to access special features. To
use the disc menu, press DVD MENU. Input the corresponding number
1
2
Press ZOOM during playback or still playback to activate the Zoom
function. The square frame appears briefly in the right bottom of the
picture.
Each press of the ZOOM button changes the TV screen in the
sequence: 100% size ➜ 400% size ➜ 1600% size ➜ screen fit
mode ➜ 100% size
or use the
buttons to highlight your selection.
Then press ENTER.
DVD-V
TITLE MENU
Screen fit mode:
1
Press TITLE. If the current title has a menu, the menu appears on the
screen. Otherwise, the disc menu may appear.
The menu offers features such as camera angles, spoken language
and subtitle options, and chapters for the title.
Press TITLE to exit.
You can change the way the image appears on the screen when
you’re playing a DVD movie. Press
Enhanced, and Maximum.
to select between Normal,
2
3
4
Use the
buttons to move through the zoomed picture.
3
To resume normal playback, press CLEAR.
DVD-V
DISC MENU
NOTES
1
2
Press DVD MENU and the disc menu is displayed.
Press DVD MENU again to exit.
•
•
Zoom may not work on some DVDs.
Screen fit mode is available for playing the DVD disc, VR disc and
movie file.
DVD-V
CAMERA ANGLE
If the disc contains scenes recorded at different camera angles, you can
change to a different camera angle during playback. Press ANGLE
repeatedly during playback to select a desired angle. Note that the
number of the current angle appears on the display.
DVD-V
VCD
MARKER SEARCH
To enter a Marker
You can start playback from up to nine memorized points. To enter a
marker, press MARKER at the desired point on the disc. The Marker icon
appears on the TV screen briefly. Repeat to enter up to nine markers.
TIP
The angle indicator will blink on the TV screen during scenes
recorded at different angles as an indication that angle switching is
possible.
To Recall or Clear a Marked Scene
1
2
3
4
During disc playback, press SEARCH. The marker search menu
appears on the screen.
Within 10 seconds, press
want to recall or clear.
to select a marker number that you
CHANGING THE AUDIO LANGUAGE
DVD-V
Press ENTER and playback starts from the marked scene. Or, Press
CLEAR and the marker number is erased from the list.
You can play any marker by inputting its number on the marker
search menu.
Press AUDIO repeatedly during playback to hear a different audio
language or audio track.
With DVD-RW discs recorded in VR mode that have both a main and a
Bilingual audio channel, you can switch between Main (L), Bilingual (R),
or a mix of both (Main + Bilingual) by pressing AUDIO.
DVD-V
VCD
PAUSE
DVD-V
1
2
Press PAUSE/STEP during playback.
To return to playback, press PLAY.
SUBTITLES
Press SUBTITLE repeatedly during playback to see the different subtitle
languages.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
OPERATION WITH AUDIO CD AND MP3 / WMA DISC
MP3 / WMA disc compatibility with this player is limited as
follows:
PLAYING AN AUDIO CD OR MP3/WMA DISC
The DVD player can play MP3/WMA formatted recordings on CD-ROM,
CD-R, or CD-RW discs.
1
Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48 kHz
(WMA)
2
3
Bit rate: within 8 - 320kbps (MP3), 32 - 192kbps (WMA)
The player cannot read an MP3/WMA file that has a file extension
other than “.mp3” / “.wma”.
AUDIO CD
Once you insert an audio CD a menu appears on the TV screen.
Press
starts.
to select a track then press PLAY or ENTER and playback
4
5
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that cannot create a
file system (eg. Direct-CD) it is impossible to playback MP3 / WMA
files. We recommend that you use Easy-CD Creator, which creates
an ISO 9660 file system.
AUDIO CD
0:52:07
1 / 12
List
Program
Track1
6
File names should have a maximum of 8 letters and must
incorporate an .mp3 or .wma extension.
Track2
Track3
Track4
Track5
7
8
They should not contain special letters such as / ? * : “ < > l etc.
The total number of files on the disc should be less than 650.
This DVD player requires discs and recordings to meet certain
technical standards in order to achieve optimal playback quality. Pre-
recorded DVDs are automatically set to these standards. There are
many different types of recordable disc formats (including CD-R
containing MP3 or WMA files) and these require certain pre-existing
conditions (see above) to ensure compatible playback.
Track6
Track7
Track8
Clear All
PROGRAM Edit
MP3 / WMA
1
Press
to select a folder, and press ENTER to see the folder
to select a track then press PLAY or ENTER. Playback
contents.
Press
2
starts.
Customers should note that permission is required in order to
download MP3 / WMA files and music from the Internet. NAD
ELECTRONICS INTERNATIONAL has no right to grant such
permission. Permission should always be sought from the
copyright owner.
MUSIC
0:00:00
1 / 12
List
Program
1-Music1
2-Music2
3-Music3
4-Music4
5-Music5
6-Music6
7-Music7
Clear All
DISPLAY Info
PROGRAM Edit
ID3 TAG
•
When playing a file containing information such as track titles, you
can see the information by pressing DISPLAY.
[ Title, Artist, Album, Year, Comment ]
•
If there is no information, “NO ID3 TAG” appear on the display.
TIP
•
If you are in a file list on the MUSIC menu and want to return to the
Folder list, use the
to highlight
and press ENTER.
•
•
Press DVD MENU to move to the next page.
On a CD with MP3/WMA and JPEG, you can switch between
MP3/WMA and JPEG. Press TITLE and MUSIC or PHOTO at the top
of the menu is highlighted.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
OPERATION WITH AUDIO CD AND MP3 / WMA DISC
CD
MP3
WMA
AUDIO CD AND MP3 / WMA DISC FEATURES
CD MP3
WMA
RANDOM
1
Press RANDOM during playback. Random Playback begins
immediately and RANDOM appears on the menu screen.
To return to normal playback, press RANDOM repeatedly until
RANDOM disappears from the menu screen.
PAUSE
1
2
Press PAUSE/STEP during playback.
To return to playback, press PLAY, ENTER or press PAUSE/STEP again.
2
CD
MP3
WMA
MOVING TO ANOTHER TRACK
TIP
1
Press SKIP (
track or to return to the beginning of the current track.
Press SKIP twice briefly to go back to the previous track.
You can play any track by inputting its number (CD only).
or
) briefly during playback to go to the next
By pressing SKIP:
another track and resumes random playback.
during random playback, the unit selects
2
3
CD
REPEAT A-B
1
To repeat a sequence during disc playback press A-B at your chosen
starting point. The Repeat icon and “A” appear on the menu screen.
Press A-B again at your chosen end point. The Repeat icon and
“A-B” appear on the menu screen, and the sequence begins to play
repeatedly.
CD
MP3
WMA
REPEAT TRACK/ALL/OFF
You can play a track/all on a disc.
2
1
2
Press REPEAT when playing a disc. The repeat icon appears.
Press REPEAT to select a desired repeat mode.
Track: repeats the current track
3
To exit the sequence and return to normal play, press A-B again. The
Repeat icon disappears from the menu screen.
All: repeats all the tracks on a disc.
Off(No display): does not play repeatedly.
CD
3D SURROUND
NOTE
If you press SKIP (
playback cancels.
To produce a 3D surround effect that simulates multi- channel audio
from two stereo speakers (instead of the five+ speakers normally
required for multi-channel audio from a home theatre system).
) once during Repeat Track playback, the repeat
1
Press AUDIO during playback.
“3D SUR.” appears on the menu screen.
CD
MP3
WMA
SEARCH
1
2
Press SCAN (
Press SCAN (
or
or
) during playback.
) repeatedly to select the required speed:
2
To return to normal playback, press AUDIO repeatedly until
“3D SUR.” disappears from the menu screen.
X2, X4, X8 backward or forward.
To exit SEARCH mode, press PLAY.
3
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
PROGRAMMED PLAYBACK
The program function enables you to store your favourite tracks from
any disc in the player memory. A program can contain 30 tracks.
5
6
Press PLAY or ENTER to start. Playback begins in the order in which
you programmed the tracks. Playback stops after all of the tracks on
the “Program” list have played once.
To resume normal playback from programmed playback, select a
track of AUDIO CD (or MUSIC) list and then press PLAY.
1
Insert a disc.
Audio CD or MP3/WMA Discs:
AUDIO CD or MUSIC menu appears.
2
Press PROGRAM.
E
The
mark will appear to the right of the word“ Program” on the
REPEAT PROGRAMMED TRACKS
right side of the menu screen.
1
2
Press REPEAT when playing a disc. The repeat icon appears.
Press REPEAT to select a desired repeat mode.
Track: repeats the current track
All: repeats all the tracks on the programmed list.
Off (No display): does not play repeatedly.
NOTE
Press PROGRAM again, then the
Program Edit mode.
E
mark will disappear to exit the
NOTE
If you press :
playback cancels.
MUSIC
AUDIO CD
once during Repeat Track playback, the repeat
0:00:00
1
/
12
0:52:07
1
/
12
List
E
List
Program
2-Music2
E
Program
Track5
Track1
4-Music4
1-Music1
2-Music2
3-Music3
4-Music4
5-Music5
6-Music6
7-Music7
Track2
Track3
Track4
Track5
Track7
Track4
Track1
6-Music6
1-Music1
ERASING A TRACK FROM PROGRAM LIST
Track6
Track7
Track8
1
Use
to select the track that you wish to erase from the
Clear All
Clear All
Program list.
PROGRAM Edit
DISPLAY Info
PROGRAM Edit
2
Press CLEAR. Repeat to erase additional tracks on the list.
Audio CD Menu
VIDEO CD
MP3/WMA Menu
ERASING THE COMPLETE PROGRAM LIST
1
2
Press
Use
to move to the “Program” list.
to select “Clear All”, then press ENTER.
Press PROGRAM while playback is stopped. The program menu
appears. Press PROGRAM again and hold it down for a few seconds to
exit the menu.
NOTE
The programs are also cleared when the disc is removed.
NOTE
On a Video CD with PBC, you must set PBC to Off on the setup menu
to use the programmed playback (See “PBC” on page 15).
VIDEO CD
List
Track1
E
Program
Track5
Track2
Track3
Track4
Track5
Track2
Track3
Track1
Clear All
Video CD Menu
3
4
Select a track on the “List”, then press ENTER to place the selected
track on the “Program” list. Repeat to place additional tracks on the
list.
Press
.
Select the track you want to start playing on the “Program” list.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
OPERATION WITH JPEG DISC
JPEG
VIEWING A JPEG DISC
ZOOM
Using this DVD Player you can view Kodak PICTURE CDs and discs with
JPEG files.
Use zoom to enlarge the photo image.
(see page 19)
1
Insert a disc and close the tray. The PHOTO menu appears on the TV
screen.
JPEG
during showing a picture to rotate the picture clockwise or
TO ROTATE PICTURE
Press
PHOTO
counter clockwise.
List
Preview
JPEG Folder 1
JPEG Folder 2
JPEG Folder 3
JPEG Folder 4
JPEG Folder 5
JPEG Folder 6
JPEG Folder 7
JPEG Folder 8
TO LISTEN TO MP3/WMA MUSIC WATCHING PICTURE
JPEG
You can display files while listening to MP3/WMA music files recorded
on the same disc.
1
2
3
4
Insert the disc containing the two types of files in the player.
Press TITLE to display PHOTO menu.
2
3
Press
to select a folder, and press ENTER. A list of files in the
Press
Use
to select a photo file.
to select icon then press ENTER. Playback starts.
folder appears. If you are in a file list and want to return to the
previous Folder list, use the
and press ENTER.
buttons on the remote to highlight
The playback will continue until STOP is pressed.
If you want to view a particular file, press
to highlight a file and
TIP
press ENTER or PLAY. Viewing the file proceeding starts. While
viewing a file, you can press STOP to move to the previous menu
(PHOTO menu).
To listen to only the desired music watching picture, programmed the
desired tracks from the “MUSIC” menu and then proceed as above.
JPEG DISC COMPATIBILITY WITH THIS PLAYER IS LIMITED AS
FOLLOWS:
TIP
•
•
Press DVD MENU to move to the next page.
•
Depending upon the size and number of JPEG files, it could take a
long time for the DVD player to read the disc’s contents. If you don’t
see an on- screen display after several minutes, some of the files may
be too large — reduce the resolution of the JPEG files to less than
2M pixels as 2760 x 2048 pixels and burn another disc.
The total number of files and folders on the disc should be less
than 650.
There are three Slide Speed options
:
>>> (Fast), >> (Normal), and > (Slow).
Use
to highlight the Speed. Then, use
to select the
option you want to use then press ENTER.
•
•
On a disc with MP3/WMA and JPEG, you can switch between
MP3/WMA and JPEG. Press TITLE and MUSIC or PHOTO at the top
of the menu is highlighted.
•
•
•
•
•
Some discs may be incompatible due to a different recording format
or the condition of the disc.
Press RETURN, file information is hidden.
Ensure that all the selected files have the “.jpg” extensions when
copying into the CD layout.
JPEG
SLIDE SHOW
Use
to highlight the
(Slide Show) then press ENTER.
If the files have “.jpe” or “.jpeg” extensions, please rename them as
“.jpg” files.
JPEG
STILL PICTURE
1
File names without a “.jpg” extension will not be able to be read by
this DVD player even though the files are shown as JPEG image files
in Windows Explorer.
Press PAUSE/STEP during slide show. The player will now go into
PAUSE mode.
2
To return to the slide show, press PLAY or press PAUSE/STEP again.
JPEG
) or cursor ( ) once while viewing a picture
MOVING TO ANOTHER FILE
Press SKIP (
or
to advance to the next or previous file.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
OPERATION WITH A DVD VR FORMAT DISC
MAINTENANCE AND SERVICE
Refer to the information in this chapter before contacting a service
technician.
This unit will play DVD-R/RW discs recorded using the DVD-Video
format that have been finalized using a DVD-recorder.
•
This unit will play DVD-RW discs recorded using the Video Recording
(VR) format.
HANDLING THE UNIT
1
Insert a disc and close the tray. The DVD-VR menu appears on the
TV screen.
When shipping the unit
Please save the original shipping carton and packing materials. If you
need to ship the unit, for maximum protection, re-pack the unit as it was
originally packed at the factory.
DVD-VR
Keeping the exterior surfaces clean
•
•
Do not use volatile liquids such as insecticide spray near the unit.
Do not leave rubber or plastic products in contact with the unit for
a long period of time. since they leave marks on the surface.
2
Press
to select a track then press PLAY or ENTER and playback
Cleaning the unit
starts.
To clean the player, use a soft, dry cloth. If the surfaces are extremely
dirty, use a soft cloth lightly moistened with a mild detergent solution.
NOTES
•
•
Unfinalized DVD-R/RW discs cannot be played in this player.
Some DVD-VR disc are made with CPRM data by DVD RECORDER.
Player does not support these kinds of discs and display the “CHECK
DISC”.
Do not use strong solvents such as alcohol, benzine, or thinner, as these
might damage the surface of the unit.
Maintaining the Unit
The DVD player is a high-tech, precision device. If the optical pick-up
lens and disc drive parts are dirty or worn, the picture quality could be
diminished.
WHAT IS ‘CPRM’?
CPRM is a copy protection system (with scramble system) only
allowing the recording of ‘copy once’ broadcast programs. CPRM
stands for Content Protection for Recordable Media.
Depending on the operating environment, regular inspection and
maintenance are recommended after every 1,000 hours of use.
For details, please contact your nearest authorized service centre.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
ADDITIONAL INFORMATION
ADDITIONAL FEATURES
LAST SCENE MEMORY
VIDEO MODE SETTING
•
With certain discs, the playback picture may be flickering or Dot
Crawl is shown on straight lines. That means Vertical interpolation or
De-interlace is not perfectly matched with the disc. In this case, the
picture quality may be improved by changing the video mode.
To change the video mode, press and hold DISPLAY about 3 seconds
during disc playback. The new video mode number selected is
displayed on the TV screen. Check whether the video quality has
improved. If not, repeat the above procedure until picture quality is
improved.
DVD-V
VCD
This player memorizes the last scene from the last disc that is viewed.
The last scene remains in memory even if you remove the disc from the
player or switch off the player. If you load a disc that has the scene
memorized, the scene is automatically recalled.
•
NOTE
This player does not memorize the scene of a disc if you switch off
the player before commencing to play the disc.
•
•
Video mode change sequence:
MODE1 → MODE2 → MODE3 → MODE1
If you turn off the power, the video mode will be back to initial state
SCREEN SAVER
(MODE1).
The screen saver appears when you leave the DVD player in Stop mode
for about five minutes. If the Screen Saver is displayed for five minutes,
the DVD Player automatically turns itself off.
TIP
DETAILED DESCRIPTIONS FOR VIDEO MODES
MODE1: The source material of the DVD video (film material or video
material) is determined from disc information.
MODE2: Suitable for playing film based content or video based material
recorded by the progressive scan method.
MODE3: Suitable for playing video based content with comparatively
little motion.
NOTE
The video mode setting only works when the Progressive Scan mode
is set to “On” in the Setup menu.
SYSTEM SELECT
You must select the appropriate system mode for your TV system. If NO
DISC appears in the display window, press and hold PAUSE on the front
panel for more than 5 seconds to be able to select a system
(PAL, NTSC, or AUTO).
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
TROUBLESHOOTING
Check the following guide for the possible cause of a problem before contacting service.
SYMPTOM
CAUSE
CORRECTION
•
•
•
•
•
The power cord is disconnected.
•
•
•
•
•
Plug the power cord securely into the mains
socket.
No power.
No disc is inserted.
Insert a disc. (Check that the DVD or, audio CD
indicator in the display window is lit.)
The power is on, but the DVD player does not
work.
The TV is not set to receive DVD signal output.
The video cable is not connected securely.
Select the appropriate video input mode on
the TV.
No picture.
No sound.
Connect the video cable securely.
The equipment connected with the audio cable
is not set to receive DVD signal output.
Select the correct input mode of the audio
receiver so you can listen to the sound from the
DVD player.
•
•
The power of the equipment connected with the
audio cable is turned off.
•
•
Turn on the equipment connected with the
audio cable.
The AUDIO options are set to the wrong
position.
Set the Digital Audio Output to the correct
position, then turn on the DVD player again by
pressing POWER.
•
•
•
•
An unplayable disc is inserted.
The rating level is set.
•
•
•
•
Insert a playable disc. (Check the disc type, color
system, and regional code.)
The DVD player does not start playback.
The remote control does not work properly.
Cancel the rating function or change the rating
level.
The remote control is not pointed at the remote
sensor on the DVD player.
Point the remote control at the remote sensor of
the DVD player.
The remote control is too far from the DVD
player.
Operate the remote control closer to the DVD
player.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
TABLE OF LANGUAGES AND THEIR CODES
Language Code List
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Code Language
6566 Abkhazian
6565 Afar
6570 Afrikaans
8381 Albanian
6577 Ameharic
6582 Arabic
7289 Armenian
6583 Assamese
6588 Aymara
6590 Azerbaijani
6665 Bashkir
6985 Basque
6678 Bengali; Bangla
6890 Bhutani
6672 Bihari
Code Language
7074 Fiji
7073 Finnish
7082 French
7089 Frisian
7176 Galician
7565 Georgian
6869 German
6976 Greek
7576 Greenlandic
7178 Guarani
7185 Gujarati
7265 Hausa
Code Language
7678 Lingala
7684 Lithuanian
7775 Macedonian
7771 Malagasy
7783 Malay
7776 Malayalam
7784 Maltese
7773 Maori
7782 Marathi
7779 Moldavian
7778 Mongolian
7865 Nauru
7869 Nepali
7879 Norwegian
7982 Oriya
8065 Panjabi
8083 Pashto, Pushto
7065 Persian
Code Language
8373 Singhalese
8375 Slovak
8376 Slovenian
8379 Somali
6983 Spanish
8385 Sudanese
8387 Swahili
8386 Swedish
8476 Tagalog
8471 Tajik
8465 Tamil
8484 Tatar
8469 Telugu
8472 Thai
6679 Tibetan
8473 Tigrinya
8479 Tonga
8482 Turkish
8475 Turkmen
8487 Twi
7387 Hebrew
7273 Hindi
7285 Hungarian
7383 Icelandic
7378 Indonesian
7365 Interlingua
7165 Irish
6682 Breton
6671 Bulgarian
7789 Burmese
6669 Byelorussian
7577 Cambodian
6765 Catalan
9072 Chinese
6779 Corsican
7282 Croatian
6783 Czech
6865 Danish
7876 Dutch
6978 English
6979 Esperanto
6984 Estonian
7079 Faroese
8076 Polish
7384 Italian
8084 Portuguese
8185 Quechua
8277 Rhaeto-Romance
8279 Rumanian
8285 Russian
8377 Samoan
8365 Sanskrit
7168 Scots Gaelic
8382 Serbian
7465 Japanese
7487 Javanese
7578 Kannada
7583 Kashmiri
7575 Kazakh
7589 Kirghiz
7579 Korean
7585 Kurdish
7679 Laothian
7665 Latin
8575 Ukrainian
8582 Urdu
8590 Uzbek
8673 Vietnamese
8679 Volapük
6789 Welsh
8779 Wolof
8872 Xhosa
7473 Yiddish
8979 Yoruba
9085 Zulu
8372 Serbo-Croatian
8378 Shona
8368 Sindhi
7686 Latvian, Lettish
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
COUNTRY CODE LIST
Choose a country code from this list.
Code Country
Code Country
Code Country
Code Country
AD Andorra
ER
ES
ET
FI
Eritrea
LC
LI
Saint Lucia
Liechtenstein
Sri Lanka
Liberia
SC
SD
SE
SG
SH
SI
Seychelles
Sudan
AE
AF
United Arab Emirates
Afghanistan
Spain
Ethiopia
Finland
Fiji
LK
LR
LS
LT
Sweden
AG Antigua and Barbuda
Singapore
Saint Helena
Slovenia
AI
Anguilla
Albania
FJ
Lesotho
AL
FK
Falkland Islands
Lithuania
Luxembourg
Latvia Islands
Libya
AM Armenia
FM Micronesia
LU
LV
LY
SJ
Svalbard and
Jan Mayen
Slovak Republic
Sierra Leone
AN Netherlands Antilles
AO Angola
FO
FR
FX
Faroe Islands
France
SK
SL
AQ Antarctica
France (European
Territory)
MA Morocco
AR
AS
AT
Argentina
MC Monaco
SM San Marino
American Samoa
Austria
GA Gabon
MD Moldavia
SN
SO
SR
ST
Senegal
GB
Great Britain
MG Madagascar
MH Marshall Islands
MK Macedonia
ML Mali
Somalia
AU Australia
AW Aruba
GD Grenada
Suriname
GE
GF
Georgia
Saint Tome and Principe
Former USSR
El Salvador
Syria
AZ
BA
BB
BD
BE
BF
Azerbaidjan
French Guyana
SU
SV
SY
SZ
Bosnia-Herzegovina
Barbados
Bangladesh
Belgium
GH Ghana
MM Myanmar
MN Mongolia
MO Macau
GI
Gibraltar
GL
Greenland
Swaziland
Turks and Caicos Islands
Chad
GM Gambia
GN Guinea
MP Northern Mariana Islands
MQ Martinique (French)
MR Mauritania
MS Montserrat
MT Malta
TC
TD
TF
Burkina Faso
Bulgaria
BG
BH
BI
GP
Guadeloupe (French)
French Southern
Territories
Bahrain
GQ Equatorial Guinea
Burundi
GR
GS
Greece
TG
TH
TJ
Togo
BJ
Benin
S. Georgia &
S. Sandwich Isls.
Guatemala
MU Mauritius
Thailand
BM Bermuda
MV Maldives
Tadjikistan
Tokelau
BN
BO
BR
BS
BT
BV
Brunei Darussalam
GT
MW Malawi
TK
Bolivia
GU Guam (USA)
GW Guinea Bissau
GY Guyana
MX Mexico
TM Turkmenistan
Brazil
MY Malaysia
TN
TO
TP
TR
TT
TV
Tunisia
Bahamas
Bhutan
MZ Mozambique
NA Namibia
Tonga
HK
Hong Kong
East Timor
Turkey
Bouvet Island
HM Heard and McDonald
Islands
NC New Caledonia (French)
BW Botswana
NE
NF
Niger
Trinidad and Tobago
Tuvalu
BY
BZ
Belarus
Belize
HN Honduras
Norfolk Island
HR
HT
Croatia
Haiti
NG Nigeria
TW Taiwan
TZ Tanzania
CA Canada
NI
Nicaragua
Netherlands
CC Cocos (Keeling) Islands
HU Hungary
NL
UA Ukraine
UG Uganda
CF
Central African Republic
ID
IE
Indonesia
Ireland
Israel
NO Norway
CG Congo
NP
NR
Nepal
Nauru
UK
United Kingdom
CH Switzerland
IL
UM USA Minor Outlying
Islands
CI
CK
CL
Ivory Coast
Cook Islands
Chile
IN
IO
India
NU Niue
British Indian Ocean
Territory
Iraq
NZ
New Zealand
US
UY
UZ
VA
VC
United States
Uruguay
OM Oman
CM Cameroon
CN China
IQ
IR
PA
PE
PF
Panama
Uzbekistan
Iran
Peru
Vatican City State
Saint Vincent &
Grenadines
CO Colombia
IS
Iceland
Italy
Polynesia (French)
Papua New Guinea
Philippines
Pakistan
CR
CS
Costa Rica
IT
PG
PH
PK
PL
Former Czechoslovakia
JM
JO
JP
Jamaica
Jordan
Japan
VE
Venezuela
CU Cuba
VG Virgin Islands (British)
CV
CX
CY
CZ
DE
DJ
Cape Verde
Poland
VI
Virgin Islands (USA)
Vietnam
Christmas Island
Cyprus
KE
Kenya
PM Saint Pierre and Miquelon
VN
VU
KG Kyrgyzstan
PN
PR
PT
Pitcairn Island
Puerto Rico
Portugal
Vanuatu
Czech Republic
Germany
KH
KI
Cambodia6
Kiribati
WF Wallis and Futuna Islands
WS Samoa
Djibouti
KM Comoros
PW Palau
YE
YT
YU
ZA
Yemen
DK
Denmark
KN
KP
KR
Saint Kitts & Nevis Anguilla
PY
Paraguay
Mayotte
DM Dominica
North Korea
South Korea
QA Qatar
Yugoslavia
South Africa
DO Dominican Republic
RE
RO
RU
Reunion (French)
DZ
EC
EE
Algeria
KW Kuwait
Romania
ZM Zambia
ZR Zaire
ZW Zimbabwe
Ecuador
Estonia
KY
KZ
LA
LB
Cayman Islands
Russian Federation
Kazakhstan
Laos
RW Rwanda
EG
EH
Egypt
SA
SB
Saudi Arabia
Solomon Islands
Western Sahara
Lebanon
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
SPECIFICATIONS
GENERAL
Power requirements
Power consumption
Dimensions (approx.)
Weight (approx.)
AC 110-240 V, 50/60 Hz
12 W
430 x 39 x 242 mm (W x H x D) without foot
2.2 kg
Operating temperature
Operating humidity
5 °C to 35 °C (41 °F to 95 °F)
5 % to 90 %
SYSTEM
Laser
Signal system
Semiconductor laser, wavelength 650 nm
PAL/NTSC
Frequency response
DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Signal-to-noise ratio
Harmonic distortion
Dynamic range
More than 100 dB (ANALOG OUT connectors only)
Less than 0.008%
More than 90 dB (DVD/CD)
OUTPUTS
VIDEO OUT
S-VIDEO OUT
1 Vp-p 75 Ω, sync negative, RCA jack x 1 /SCART (TO TV)
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1
(C) 0.3 V (p-p) 75 Ω
COMPONENT VIDEO OUT
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(Cb/Pb)/(Cr/Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
AUDIO OUT
DIGITAL OUT (COAXIAL)
DIGITAL OUT (OPTICAL)
2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1 /SCART (TO TV)
0.5 V (p-p), 75 Ω, RCA jack x 1
3 V (p-p), 75 Ω, Optical Connector x 1
ACCESSORIES
Video cable
Audio cable
Remote control
Batteries
1
1
1
2
Note: Design and specifications are subject to change prior notice.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
©2005 NAD ELECTRONICS INTERNATIONAL
A DIVISION OF LENBROOK INDUSTRIES LIMITED
All rights reserved. No part of this publication may be reproduced, stored or transmitted in any form without the written permission of NAD Electronics International
T 514 Manual C Version 02/05
Download from Www.Somanuals.com. All Manuals Search And Download.
|