®
T 513
DVD / CD / MP3 Player
Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
SAFETY PRECAUTIONS
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE
NOTES ON COPYRIGHT
It is forbidden by law to copy, broadcast, show, broadcast via cable, play
in public, or rent copyright material without permission. This product is
equipped with copy protection measures developed by Macrovision.
Copy protection signals are recorded on some discs. When recording
these discs on a VCR, picture noise will appear during playback. This
product incorporates copyright protection technology that is protected
by certain U.S. patent claims and other intellectual property rights
owned by Macrovision Corporation and other rights owners. Use of this
copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
CAUTION
THIS DVD PLAYER EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE
OF THIS PRODUCT, PLEASE READ THIS OWNER’S MANUAL CAREFULLY
AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE
MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION.
USE OF CONTROLS, ADJUSTMENTS TO MODIFY PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO
OPEN THE ENCLOSURE. VISIBLE LASER RADIATION EXISTS WHEN THE
ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM.
RECORD YOUR MODEL NUMBER (NOW, WHILE YOU CAN
SEE IT)
The model and serial number of your new DVD player are located on
the back of the DVD player cabinet. For your future convenience, we
suggest that you record these numbers here:
THE APPARATUS SHOULD NOT BE EXPOSED TO DRIPPING OR
SPLASHING, AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,
SHOULD NEVER BE PLACED ON THE APPARATUS.
MODEL NO.____________________________
SERIAL NO.____________________________
WARNING: CHANGES OR MODIFICATIONS NOT
EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR
COMPLIANCE COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
This product is manufactured to comply with the radio interference
requirements of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC.
NAD is a trademark of NAD Electronics International, a division of Lenbrook Industries Limited
Copyright 2003, NAD Electronics International, a division of Lenbrook Industries Limited
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
TABLE OF CONTENTS
INTRODUCTION
OPERATION
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Disc-related terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Types of video CDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Precautions for handling the unit . . . . . . . . . . . . . . . . . . . . . . . . 5
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Front Panel and Display Window . . . . . . . . . . . . . . . . . . . . . . . .7
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Operation with DVD and Video CD . . . . . . . . . . . . . . . . . . . . .17
Playing a DVD and Video CD . . . . . . . . . . . . . . . . . . . . . . . . . 17
General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Special DVD Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Operation with Audio CD and MP3 / WMA Disc . . . . . . . . . . .20
Playing an Audio CD and MP3 / WMA Disc . . . . . . . . . . . . . . . 20
Notes on MP3/WMA Recordings . . . . . . . . . . . . . . . . . . . . . . . 20
Operation with JPEG Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Viewing a JPEG disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Programmed Playback
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
PREPARATION
REFERENCE
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Connecting to Optional Equipment . . . . . . . . . . . . . . . . . . . . . 10
Before Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
General Explanation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
On-Screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Speaker selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Table of Languages and Their Abbreviations . . . . . . . . . . . . . .26
Country Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
BEFORE USE
PLAYABLE DISCS
TRACK (VIDEO CD AND AUDIO CD ONLY)
Sections of a picture or a musical piece on a video CD or an audio CD.
Each track is assigned a track number, enabling you to locate the track
you want.
DVD video discs
(8 cm / 12 cm disc)
Video CD (VCD)
(8 cm / 12 cm disc)
SCENE
On a video CD with PBC (Playback control) functions, moving pictures
and still pictures are divided into sections called “Scenes”. Each scene is
displayed in the menu screen and assigned a scene number, enabling
you to locate the scene you want. A scene is composed of one or several
tracks.
Audio CD
(8 cm / 12 cm disc)
In addition, this unit can play a DVD-R, DVD RW, Kodak PICTURE CD,
SVCD, and CD-R or CD-RW that contains audio titles, MP3, WMA or
JPEG files.
TYPES OF VIDEO CDS
There are two types of video CDs:
NOTES
•
Depending on the conditions of the recording equipment or the CD-
R/RW (or DVD-R/ RW) disc itself, some CD-R/RW (or DVD-R/ RW)
discs cannot be played on the unit.
Video CDs equipped with PBC (Version 2.0)
PBC (Playback control) functions allow you to interact with the system
via menus, search functions, or other typical computer-like operations.
Moreover, still pictures of high resolution can be played if they are
included in the disc.
•
•
Do not attach any seal or label to either side (the labeled side or the
recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal).
It may result in malfunctions.
Video CDs not equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs allow playback of
video pictures as well as sound, but they are not equipped with PBC.
NOTES ON DVDS AND VIDEO CDS
Some playback operations of DVDs and Video CDs may be intentionally
fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to disc content
designed by the software manufacturer, some playback features of the
unit may not be available or other functions may be added.
Refer also to the instructions supplied with the DVDs and Video CDs.
Some DVDs made for business purposes may not be played on the unit.
REGIONAL CODE OF THE DVD PLAYER AND DVDS
This DVD player is designed and manufactured for playback of
region “1” encoded DVD software.
1
The region code on the labels of some DVD discs indicates
which type of player can play those discs. This unit can play only DVD
discs labeled “1” or “ALL”. If you try to play any other discs, the
message “Check Regional Code” will appear on the TV screen. Some
DVD discs may not have a region code label even though their playback
is prohibited by area limits.
DISC-RELATED TERMS
TITLE (DVD VIDEO DISCS ONLY)
The main film content, accompanying feature content, additional
feature content, or music album. Each title is assigned a title reference
number enabling you to locate it easily.
CHAPTER (DVD VIDEO DISCS ONLY)
Sections of a picture or a musical piece that are smaller than titles. A title
is composed of one or several chapters. Each chapter is assigned a
chapter number, enabling you to locate the chapter you want.
Depending on the disc, chapters may not be recorded.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
BEFORE USE
PRECAUTIONS FOR HANDLING THE UNIT
WHEN SHIPPING THE UNIT
The original shipping carton and packing materials come in handy. For
maximum protection, re-pack the unit as it was originally packed at the
factory.
ABOUT SYMBOLS
ABOUT THE SYMBOL DISPLAY
“ ” may appear on the TV screen during operation. This icon means
the function explained in this owner’s manual is not available on that
specific DVD video disc.
WHEN SETTING UP THE UNIT
ABOUT THE DISC SYMBOLS FOR INSTRUCTIONS
A section whose title has one of the following symbol is applicable only
to the disc represented by the symbol.
The picture and sound of a nearby TV, VCR, or radio may be distorted
during playback. In this case, position the unit away from the TV, VCR,
or radio, or turn off the unit after removing the disc.
DVD-V
DVD Video discs
VCD 2.0
TO KEEP THE EXTERIOR SURFACES CLEAN
Video CDs with the PBC (playback control) function
VCD 1.0
Do not use volatile liquids, such as insecticide spray, near the unit. Do
not leave rubber or plastic products in contact with the unit for a long
period of time. They will leave marks on the surface.
Video CDs without the PBC (playback control) function
CD
Audio CDs
MP3
MP3 disc
WMA
WMA disc
JPEG
TO CLEAN THE CABINET
JPEG disc
Use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth
lightly moistened with a mild detergent solution. Do not use strong
solvents such as alcohol, benzine, or thinner, as these might damage the
surface of the unit.
TO OBTAIN A CLEAR PICTURE
The DVD player is a high-tech, precision device. If the optical pick-up
lens and disc drive parts are dirty or worn, the picture quality will be
poor. Regular inspection and maintenance are recommended after every
1,000 hours of use. (This depends on the operating environment.) For
details, please contact your nearest dealer.
NOTES ON DISCS
HANDLING DISCS
Do not touch the playback side of the disc. Hold the disc by the edges
so that fingerprints will not get on the surface. Do not stick paper or
tape on the disc.
STORING DISCS
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources of heat, or leave it
in a parked car exposed to direct sunlight, as there may be a
considerable temperature increase inside the car.
CLEANING DISCS
Fingerprints and dust on the disc can cause poor picture quality and
sound distortion. Before playing, clean the disc with a clean cloth. Wipe
the disc from the center out.
Do not use strong solvents such as alcohol, benzine, thinner,
commercially available cleaners, or anti-static spray intended for older
vinyl records.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
REAR PANEL
COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
AUDIO OUT (Left/Right)
Connect to an amplifier, receiver, or stereo system.
VIDEO OUT
Connect to a TV with video inputs.
12V TRIGGER IN
By connecting this DVD player to another NAD audio component or system controller equipped with a 12V
trigger output, you can remotely operate the T513 power ON/OFF.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.
S-VIDEO OUT
Connect to a TV with S-Video inputs.
AC Power Cord
Plug into the power source.
OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
DO NOT TOUCH THE INNER PINS OF THE CONNECTORS ON THE REAR PANEL.
ELECTROSTATIC DISCHARGE MAY CAUSE PERMANENT DAMAGE TO THE UNIT.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
FRONT PANEL AND DISPLAY WINDOW
MENU
Accesses menu on a DVD disc.
SKIP
Moves to previous or next chapter/track.
PAUSE
Pause playback temporarily or press repeatedly for frame-by-frame playback.
Disc Tray
Insert playable media here.
PLAY
Starts Playback of media.
Remote Sensor
Point the DVD player’s remote
Display window
Shows the current status of
control here.
the player
OPEN/CLOSE
Opens or closes the disc tray.
Power button
Switches the player on and to
standby.
STOP
Stops playback.
Power Indicator
Lights green when the DVD player is turned
on. Lights amber when the DVD player is in
standby.
SCAN
Press for fast reverse or forward search.
Left / right / up / down / SELECT
Selects an item in the OSD menu and Acknowledges menu selection
Angle active
TITLE Indicates current title number
CHP/TRK Indicates current chapter or track number
DVD
DVD video disc inserted
CD Audio CD inserted
VCD Video CD inserted
Indicates total play time or elapsed time
MP3 MP3 or WMA disc inserted
PROG. Programmed playback active
Random playback active
Indicates current player function:
Playback, Pause, etc.
Indicates repeat mode
MP3 VCD
CD DVD
TITLE
CHP/TRK
PROG.
RANDOM ALL
A
B
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
REMOTE CONTROL
OFF
ON
Switches DVD Player to standby
Switches DVD Player ON
PROGRAM
AUDIO
Selects an audio language (DVD) or
an audio channel (CD)
ON
OFF
ANGLE
Enters to the program edit mode or exits from that
CLEAR
AUDIO
SUBTITLE
RPT A-B
CLEAR
Removes a track number on the program list or a mark on
the MARKER SEARCH menu
SUBTITLE
Selects a subtitle language
RANDOM
ZOOM
REPEAT
PROGRAM
MARKER
ZOOM
Enlarges video image
ANGLE
Selects a DVD camera angle if available
0-9 number buttons
Selects numbered items in a menu
REPEAT
Repeat chapter, track, title, and all
NEXT DISC
SEARCH
SCAN
RPT A-B
Press for fast reverse search or forward search
Repeat sequence
MENU
RANDOM
Plays tracks in random order
1
4
7
2
5
8
3
6
9
Accesses menu on a DVD disc
RTN
MARKER
Marks any point during playback
Removes the setup menu
Displays the menu of a video CD with PBC
SEARCH
Displays MARKER SEARCH menu
OPEN/CLOSE
Opens and closes the disc tray
SLOW
0
STOP
Reverse / Forward slow playback
Stops playback
SLOW
SCAN
SETUP
SETUP
PAUSE/STEP
Accesses or removes setup menu
Pauses playback temporarily/ press repeatedly for frame-by-
frame playback
TITLE
TITLE
MENU
Displays the discs Title menu, if available
Reverse SKIP
Go to beginning of current chapter or track or go to previous
chapter or track
CURSOR
ENTER
Selects items in the on screen display menus
PLAY
ENTER
Starts playback
Acknowledges menu selection
RTN
DISP
Forward SKIP
Go to next chapter or track
DISP
OPEN/CLOSE
STOP
PLAY
PAUSE/STEP
Accesses On-Screen Display (OSD)
SKIP
SKIP
DVD 5
PLACE BATTERIES INTO OPENING. ENSURE
THE CORRECT FITTING IS OBSERVED
REPLACE BATTERY COVER BY ALIGNING AND
INSERTING THE TWO TABS INTO THE HOLES.
PRESS IN AND LIFT TAB TO REMOVE
BATTERY COVER OUT OF RECESS
PRESS BATTERY COVER INTO PLACE UNTIL IT
'CLICKS' CLOSED
REMOTE CONTROL OPERATION RANGE
CAUTION
Point the remote control at the remote sensor and press the buttons.
Distance: About 23 ft (7 m) from the front of the remote sensor.
Angle: About 30° in each direction of the front of the remote sensor.
Do not mix old and new batteries. Never mix different types of batteries
(standard, alkaline, etc.).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
CONNECTIONS
•
Depending on your TV and other equipment you wish to connect,
there are various ways you could connect the player. Use only one of
the connections described below.
PROGRESSIVE SCAN CONNECTION
•
•
1
2
If your television is a high-definition or “digital ready” television, you
may take advantage of the DVD Player’s progressive scan output for
the highest video resolution possible.
•
•
Please refer to the manuals of your TV, VCR, Stereo System or other
devices as necessary to make the best connections.
If your TV does not accept the Progressive Scan format, the picture
will appear scrambled if you try Progressive Scan on the DVD Player.
For better sound reproduction, connect the player’s AUDIO OUT
connectors to the audio in connectors of your amplifier, receiver,
stereo or audio/video equipment. See “Connecting to Optional
Equipment” on page 10.
Connect the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN
connectors on the DVD Player to the corresponding in connectors on
the TV using an optional Y Pb Pr cable (C).
Connect the Left and Right AUDIO OUT connectors of the DVD Player
to the audio left/right in connectors on the TV using the supplied
audio cables (A).
CAUTION
•
•
•
Make sure the DVD Player is connected directly to the TV. Tune the
TV to the correct video input channel.
Do not connect the DVD Player’s AUDIO OUT jack to the phono in
jack (record deck) of your audio system.
NOTES
Do not connect your DVD Player via your VCR. The DVD image could
be distorted by the copy protection system.
•
Set the Progressive to “On” on the setup menu for progressive
signal, see page 13.
•
Progressive scan does not work with the analog video connections
(yellow VIDEO OUT jack).
CONNECTING TO A TV
•
Make one of the following connections, depending on the
capabilities of your existing equipment.
Rear of TV
VIDEO CONNECTION
1
Connect the VIDEO OUT jack on the DVD Player to the video in jack
on the TV using the video cable (V).
2
Connect the Left and Right AUDIO OUT connectors of the DVD
Player to the audio left/right in connectors on the TV using the audio
cables (A).
S-VIDEO CONNECTION
1
Connect the S-VIDEO OUT jack on the DVD Player to the S-Video in
jack on the TV using the S-Video cable (S).
2
Connect the Left and Right AUDIO OUT connectors of the DVD
Player to the audio left/right in connectors on the TV using the audio
cables (A).
COMPONENT VIDEO (COLOR STREAM®) CONNECTION
1
Connect the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN
connectors on the DVD Player to the corresponding in connectors on
the TV using an Y / Pb / Pr cable (C).
2
Connect the Left and Right AUDIO OUT connectors of the DVD
Player to the audio left/right in connectors on the TV using the audio
cables (A).
Rear of DVD player
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
CONNECTIONS
CONNECTING TO OPTIONAL EQUIPMENT
Connecting to an amplifier equipped with two channel analog
stereo or Dolby Pro Logic ll / Pro Logic
Connect the Left and Right AUDIO OUT connectors on the DVD Player
to the audio left and right in connectors on your amplifier, receiver, or
stereo system, using the audio cables (A).
Connecting to an amplifier equipped with two channel digital
stereo (PCM) or to an Audio / Video receiver equipped with a
multi-channel decoder (Dolby Digital™, MPEG 2, or DTS)
1
Connect one of the DVD Player’s DIGITAL AUDIO OUT connectors
(OPTICAL (O) or COAXIAL (X)) to the corresponding in jack on your
amplifier. Use an optional digital (optical (O) or coaxial (X)) audio
cable.
2
You will need to activate the player’s digital output. (See “Digital
Audio Output” on page 14).
DIGITAL MULTI-CHANNEL SOUND
A digital multi-channel connection provides the best sound quality. For
this you need a multi-channel Audio/Video receiver that supports one or
more of the audio formats supported by your DVD Player (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and the logos on the
front of the receiver.
CAUTION
Due to the DTS Licensing agreement, the digital output will be in DTS
digital out when DTS audio stream is selected.
Rear of DVD player
Amplifier (Receiver)
NOTES
•
•
•
If the audio format of the digital output does not match the
capabilities of your receiver, the receiver will produce a strong,
distorted sound or no sound at all.
Six Channel Digital Surround Sound via digital connection can only
be obtained if your receiver is equipped with a Digital Multi-channel
decoder.
To see the audio format of the current DVD in the onscreen display,
press AUDIO.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
BEFORE OPERATION
GENERAL EXPLANATION
TEMPORARY FEEDBACK FIELD ICONS
This manual gives basic instructions for operating the DVD Player. Some
DVDs require specific operation or allow only limited operation during
playback. When this occurs, the symbol appears on the TV screen,
indicating that the operation is not permitted by the DVD Player or is not
available on the disc.
TITLE
CHAPT
TRACK
ALL
Repeat Title
Repeat Chapter
Repeat Track (non-PBC Video CDs discs only)
Repeat All Tracks (non-PBC Video CDs only)
Repeat A-B
ON-SCREEN DISPLAY
General playback status can be displayed on the TV screen. Some items
can be changed on the menu.
A
B
ON-SCREEN DISPLAY OPERATION
OFF
1
2
3
Press DISP during playback.
Repeat Off
Press
Press
to select an item. The selected item will be highlighted.
to change the setting of an item. The number buttons
Resume play from this point
Action prohibited or not available
can be also be used for setting numbers (e.g., title number). For
some functions, press ENTER to execute the setting.
NOTES
•
Some discs may not provide all of the features on the on-screen
display example shown below.
•
If no button is pressed for 10 seconds, the on-screen display
disappears.
DVD-V
Items
Function (Press
to select desired item)
Selection Method
Shows the current title number and total number of titles, and
skips to the desired title number.
Title Number
, or Numbers, ENTER
1 /3
1 /12
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
Chapter Number
Time search
, or Numbers, ENTER
Numbers, ENTER
Shows the elapsed playing time, and searches the point by the
elapsed time directly.
0:20:09
Audio language and
Digital Audio Output
mode
1 ENG
D
5.1 CH
Shows the current audio soundtrack language, encoding
method, and channel number, and changes the setting.
, or AUDEO
Subtitle language
Angle
Shows the current subtitles language, and changes the setting.
ABC
, or SUBTITLE
, or ANGLE
OFF
1 /1
Shows the current angle number and total number of angles,
and changes the angle number.
Sound
Shows the current sound mode, and changes the setting.
NORM.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
BEFORE OPERATION
VCD 2.0
VCD 1.1
Items
Function (Press
to select desired item)
Selection Method
Shows the current track number, total number of tracks and
PBC On mode, and skip to the desired track number.
Track Number
, or Numbers, ENTER
1 /3
1 /12
Time
Shows the elapsed playing time (Display only)
- - -
Audio Channel
Shows the audio channel, and changes the audio channel.
, or AUDEO
0:20:09
1 ENG
D
Sound
Shows the current sound mode, and changes the setting.
5.1 CH
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
BEFORE OPERATION
INITIAL SETTINGS
PICTURE
DVD-V
You can set your own Personal Preferences on the player.
TV ASPECT
4:3 Letterbox: Select when a standard 4:3 TV is connected. Displays
theatrical images with masking bars above and below the picture.
4:3 Panscan: Select when a conventional TV set is connected. The video
material formatted in the Pan & Scan style is played back in that style
(Both sides of the picture are cut off).
Initial Settings General Operation
1
Press SETUP. The setup menu appears.
Original
Disc Audio
English
French
Disc Subtitle
Disc Menu
16:9 Wide: Select when a 16:9 wide TV is connected.
German
Spanish
Italian
Rating
4:3 Letterbox
4:3 Panscan
16:9 Wide
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Chinese
Polish
Menu Language
Progressive Scan
Digital Audio Output
Hungarian
Other – – – –
Country Code
TV Aspect
Menu Language
Others
Progressive Scan
Digital Audio Output
2
3
4
5
Press
to select the desired item. The screen will show the
current setting for the selected item, as well as alternate setting(s).
Others
While the desired item is selected, press , then
desired setting.
to select the
DVD-V
Press ENTER to confirm your selection. Some items require additional
steps.
PROGRESSIVE SCAN
Progressive Scan Video provides the highest quality pictures with less
flickering. If you are using the COMPONENT VIDEO OUT/ PROGRESSIVE
SCAN connectors, but are connecting the DVD Player to a standard
(analog) television, set Progressive Scan to Off. If you are using the
Component Video connectors for connection to a TV or monitor that is
compatible with a progressive scan signal, set Progressive Scan to On.
Press SETUP, RTN, or PLAY to exit the setup menu.
LANGUAGE
DVD-V
DISC LANGUAGE
Select a language for the disc’s Menu, Audio, and Subtitle.
Original: The original language set for the disc is selected.
Other: To select another language, press number buttons to enter the
corresponding 4-digit number according to the language code list on
page 27. If you enter the wrong language code, press CLEAR.
Off
On
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Original
English
French
Disc Audio
Menu Language
Disc Subtitle
Disc Menu
Progressive Scan
Digital Audio Output
German
Spanish
Italian
Rating
Country Code
TV Aspect
Others
Chinese
Polish
Menu Language
Progressive Scan
Digital Audio Output
Hungarian
Other – – – –
CAUTION
Once the setting for progressive scan output is entered, an image will
only be visible on a progressive scan compatible TV or monitor. If you set
Progressive Scan to On in error, you must reset the unit. Press STOP to
stop any disc that is playing. Next, press STOP again and hold it for five
seconds before releasing it. The video output will be restored to the
standard setting, and a picture will once again be visible on a
conventional analog TV or monitor.
Others
MENU LANGUAGE
Select a language for the setup menu. This is the menu you see when
you press SETUP.
English
Spanish
French
Disc Audio
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
BEFORE OPERATION
SOUND
DIGITAL AUDIO OUTPUT
Each DVD disc has a variety of audio output options. Set the player’s
Digital Audio Output according to the type of audio system you use.
DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM” if you connected
the DVD Player’s DIGITAL OUT jack to a Dolby Digital decoder (or an
amplifier or other equipment with a Dolby Digital decoder).
Stream/PCM: Select “Stream/PCM” if you connected the DVD Player’s
DIGITAL OUT jack to an amplifier or other equipment with a DTS
decoder, Dolby Digital decoder or MPEG decoder.
PCM: Select when connected to a 2-channel digital stereo amplifier. The
DVD player outputs sounds in the PCM 2channel format when you play
a DVD video disc recorded on the Dolby Digital, MPEG1, or MPEG2
recording system.
DOLBY
Disc Audio
Disc Subtitle
Disc Menu
Rating
DIGITAL /PCM
Stream/PCM
PCM
Country Code
Sample Freq.
48 KHz
TV Aspect
Menu Language
96KHz
Progressive Scan
Digital Audio Output
Others
SAMPLE FREQUENCY
To change the Sample Frequency setting, first select the desired Digital
Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling 96 KHz signals,
select 48 KHz. When this choice is made, this unit will automatically
convert any 96 KHz signals to 48 KHz so your system can decode them.
If your receiver or amplifier is capable of handling 96 KHz signals, select
96 KHz. When this choice is made, this unit will pass each type of signal
through without any further processing.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
BEFORE OPERATION
OTHERS
PARENTAL CONTROL
DVD-V
The DRC, PBC and Auto Play settings can be changed.
RATING
•
Press
to select the desired item and press ENTER. The setting
Movies on DVDs may contain scenes not suitable for children. Therefore,
discs may contain Parental Control information that applies to the
complete disc or to certain scenes on the disc. These scenes are rated
from 1 to 8, and alternatively, more suitable scenes are available for
selection on some discs. Ratings are country-dependent. The Parental
Control feature allows you to prevent discs from being played by your
children or to have certain discs played with alternative scenes.
of the selected item is changed between On and Off.
Disc Audio
Disc Subtitle
Disc Menu
Rating
DRC
On
On
Off
PBC
Auto Play
Country Code
TV Aspect
Menu Language
8
Disc Audio
Progressive Scan
7
Disc Subtitle
Digital Audio Output
6
Disc Menu
5
Rating
Others
4
Country Code
3
TV Aspect
2
Menu Language
1
Progressive Scan
DYNAMIC RANGE COMPRESSION (DRC)
Digital Audio Output
Unlock
Change
With the DVD format, you can hear a program’s soundtrack in the most
accurate and realistic presentation possible, thanks to digital audio
technology. However, you may wish to compress the dynamic range of
the audio output (the difference between the loudest sounds and the
quietest ones). Then, you may listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this effect.
Others
1
2
3
Select “Rating” on the Setup menu using the
While “Rating” is selected, press
When you have not yet entered a password;
buttons.
.
Enter a 4-digit password using the numbered buttons to create a
personal 4-digit security password, and then press ENTER. Enter the
4-digit password again and press ENTER to verify.
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to the PBC.
Off: Video CDs with PBC are played the same way as Audio CDs.
When you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the
personal 4-digit security password, and then press ENTER. If you
make a mistake before pressing ENTER, press CLEAR and enter 4-
digit security password again.
DVD-V
AUTO PLAY
You can set up the DVD Player so a DVD disc automatically starts playing
whenever the DVD is inserted. If Auto Play mode is set to On, the T 513
DVD player will search for the longest title playback time and then play
back the title automatically.
4
Select a rating from 1 to 8 using the
buttons. Eight (8)
has the least playback restrictions. One (1) has the most
playback restrictions.
On: Auto Play function is activated.
Off: Auto Play function is not activated.
Unlock: If you select Unlock, Parental Control is not active. The disc
will play in full.
Ratings 1 to 8. Some discs contain scenes not suitable for children.
If you set a rating for the player, all disc scenes with the same rating
or lower will be played. Higher rated scenes will not be played unless
an alternative scene is available on the disc.
NOTE
The Auto Play function may not work for some DVDs.
The alternative must have the same rating or a lower one. If no
suitable alternative is found, playback will stop. You must enter the
4-digit password or change the rating level in order to play the disc.
Press ENTER to confirm your rating selection, and then press
SETUP to exit the menu.
5
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
BEFORE OPERATION
DVD-V
COUNTRY CODE
NOTE
Confirmation of the 4-digit password is necessary when the code is
Enter the code of a country/area whose standards were used to rate the
DVD video disc, referring to the list (See “Country Code List”, page 28.)
changed (see “Changing the 4-digit code” below).
Disc Audio
Code Set
CHANGING THE 4-DIGIT CODE
Disc Subtitle
Disc Menu
U
S
1
2
3
4
5
Follow Steps 1-2 as shown above to the left (Rating).
Enter the old code, and then press ENTER.
Rating
Country Code
TV Aspect
Select Change using
buttons then press ENTER.
Enter the new 4-digit code, and then press ENTER.
Enter exactly the same code a second time and verify by pressing
ENTER.
Menu Language
Progressive Scan
Digital Audio Output
6
Press SETUP to exit the menu.
Others
1
2
3
4
5
Select Country Code using the
buttons on the setup menu.
.
IF YOU FORGET YOUR 4-DIGIT CODE
If you forget your password, to clear the current password, follow the
procedure below:
While Country Code is selected, press
Follow step number “3” of “Rating” on left side of this page.
Select the first character using the buttons.
Shift the cursor using button and select the second character
using buttons.
1
2
Press SETUP to display the setup menu.
Use the Number buttons to enter the 6-digit number “210499”. The
4-digit password is cleared. “P CLr” appears on the T 513’s front
display for a moment.
6
Press ENTER to confirm your country code selection, then press
SETUP to exit the menu.
3
Enter a new code as shown under “Rating”
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
OPERATION WITH DVD AND VIDEO CD
PLAYING A DVD AND VIDEO CD
MOVING TO ANOTHER CHAPTER / TRACK
DVD-V
VCD 2.0
VCD 1.1
DVD-V
VCD 1.1
PLAYBACK SETUP
•
Turn on the TV and select the video input source connected to the
DVD player.
When a title on a disc has more than one chapter or a disc has more
than one track, you can move to another chapter/track as follows:
•
Audio system: Turn on the audio system and select the input source
connected to the DVD player.
•
Press SKIP
or
briefly during playback to select the next
chapter/track or to return to the beginning of the current
chapter/track.
1
2
3
Press OPEN/CLOSE to open the disc tray.
•
•
Press
To go directly to any chapter during DVD playback, press DISP. Then,
press to select the chapter/track icon. Then, enter the
chapter/track number using the numbered buttons (0-9).
twice briefly to step back to the previous chapter/track.
Load your chosen disc in the tray, with the playback side down.
Press OPEN/CLOSE to close the tray. READING appears on the TV
screen, and playback starts automatically. If playback does not start,
press PLAY. In some cases, the disc menu might appear instead.
1 /12
1 /3
1 /12
IF A MENU SCREEN IS DISPLAYED
The menu screen may be displayed first after loading a DVD or Video
CD which offer a menu.
NOTE
For two-digit numbers, press the numbered buttons (0-9) in rapid
succession.
DVD-V
DVD-V
VCD 2.0
VCD 1.1
Use the
buttons to select the title/chapter you want to view,
SEARCH
then press ENTER to start playback. Press TITLE or MENU to return to the
menu screen.
1
Press and hold SCAN
or
for about two seconds during
playback. The player will now go into SEARCH mode.
Press and hold SCAN or repeatedly to select the required
X4, X16, X100 (backward) or
X16, X100 (forward). With a Video CD,
X2, X4, X8, (backward) or
X8, (forward).
To exit SEARCH mode, press PLAY.
2
VCD 2.0
speed:
X2,
X2,
X4,
•
•
Use the number buttons to select the track you want to view. Press
RTN to return to the menu screen.
the Search speed changes:
X2, X4,
Menu setting and the exact operating procedures for using the
menu may differ depending on the disc. Follow the instructions on
the each menu screen. You also may set PBC to Off under setup. See
page 15.
3
DVD-V
VCD 2.0
VCD 1.1
PAUSE
1
2
Press PAUSE/STEP during playback.
To return to playback, press PLAY.
NOTES
•
If Parental Control is set and the disc is not within the Rating settings
STILL PICTURE AND FRAME-BY-FRAME PLAYBACK
DVD-V
VCD 2.0
VCD 1.1
(not authorized), the 4-digit code must be entered and/or the disc
must be authorized (see “Parental Control).
1
2
Press PAUSE/STEP during playback. The player will now go into
PAUSE mode.
•
DVDs may have a region code. Your player will not play discs that
have a region code different from your player. The region code for
this player is 2 (two).
You can advance the picture frame-by-frame by pressing
PAUSE/STEP repeatedly on the remote control.
GENERAL FEATURES
NOTE
Unless stated otherwise, all operations described use the remote
control. Some features may also be available on the Setup menu.
DVD-V
MOVING TO ANOTHER TITLE / GROUP
When a disc has more than one title/group, you can move to another
title/group as follows:
•
Press DISP, then press the appropriate numbered button (0-9) to
select a title/group number.
1 /3
1/6
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
OPERATION WITH DVD AND VIDEO CD
DVD-V
VCD 2.0
VCD 1.1
DVD-V
VCD 2.0
VCD 1.1
SLOW MOTION
REPEAT
DVD Video Discs - Repeat Chapter/Title/Off
1
Press SLOW
mode.
or
during playback. The player will enter SLOW
1
2
3
To repeat the currently playing chapter, press REPEAT. The Repeat
Chapter icon appears on the TV screen.
2
Use the SLOW
or
to select the required speed:
1/2 (backward), or 1/16,
1/2 (forward).
To exit slow motion mode, press PLAY.
1/16,
1/8,
1/8,
1/4 or
1/4 or
To repeat the title currently playing, press REPEAT a second time. The
Repeat Title icon appears on the TV screen.
3
To exit Repeat mode, press REPEAT a third time. The Repeat Off icon
appears on the TV screen.
NOTE
GROUP
TITLE
TRACK
CHAPT
ALL
OFF
•
Slow motion playback in reverse is not applicable for Video CD.
VCD 2.0
VCD 1.1
RANDOM
Video CDs - Repeat Track/All/Off
1
Press RANDOM during playback or in stop mode. The unit
automatically begins Random Playback and “RANDOM” appears on
the display window.
1
2
3
To repeat the track currently playing, press REPEAT. The Repeat Track
icon appears on the TV screen.
To repeat the disc currently playing, press REPEAT a second time. The
Repeat All icon appears on the TV screen.
2
To return to normal playback, press RANDOM until “RANDOM”
disappears on the display window.
To exit Repeat mode, press REPEAT a third time. The Repeat Off icon
appears on the TV screen.
TIPS
By pressing SKIP
another title (track) and resumes Random playback.
during Random playback, the unit selects
NOTE
On a Video CD with PBC, you must set PBC to Off on the setup
menu to use the Repeat function. See page 15.
NOTE
DVD-V
•
•
This function only works with video CD without PBC.
On a Video CD with PBC, you must set PBC to Off in the setup menu
to use the Random function. See page 15.
TIME SEARCH
The Time Search function allows you to start playing at any chosen time
on the disc.
1
Press DISP during playback. The on-screen display appears on the
screen. The Time Search box shows the elapsed playing time of the
current disc.
DVD-V
VCD 2.0
VCD 1.1
REPEAT A-B
To repeat a sequence in a title or group:
1
2
Press RPT A-B at your chosen starting point. “A *” appears briefly
on the TV screen.
2
3
Within 10 seconds, press
to select the Time Search icon in the
on-screen display. The “-:--:--” appears in the Time Search box.
Within 10 seconds, use the number buttons to enter the required
start time. Enter hours, minutes, and seconds from left to right in the
box. If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
Press RPT A-B again at your chosen end point. “A B” appears briefly
on the TV screen, and the repeat sequence begins (“AꢀB” appears
the display window).
3
To cancel the sequence, press RPT A-B.
4
Within 10 seconds, press ENTER to confirm the start time. Playback
starts from the selected time on the disc. If you enter an invalid time,
playback will continue from the current point.
A
*
A
B
OFF
0:20:09
-:--:--
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
OPERATION WITH DVD AND VIDEO CD
DVD-V
VCD 2.0
VCD 1.1
SPECIAL DVD FEATURES
3D SURROUND
DVD-V
This unit can produce a 3D Surround effect, which simulates multi-
channel audio playback from two conventional stereo speakers, instead
of the five or more speakers normally required to listen to multichannel
audio from a home theater system.
MENUS
DVDs may offer menus that allow you to access special features. To use
the disc menu, press MENU. Then, press the appropriate number button
to select an option. Or, use the
selection, then press ENTER.
buttons to highlight your
1
2
Press DISP during playback.
Use
to select the sound option. The sound option will be
DVD-V
highlighted.
TITLE MENU
3
Use
to select “3D SUR”. To turn off the 3D Surround effect,
1
2
3
Press TITLE. If the current title has a menu, the menu will appear on
select “NORM”.
the screen. Otherwise, the disc menu may appear.
The menu can list camera angles, spoken language and subtitle
options, and chapters for the title.
3D SUR
NORM.
To remove the title menu, press TITLE again.
DVD-V
VCD 2.0
VCD 1.1
ZOOM
DVD-V
The Zoom function allows you to enlarge the video image and to move
through the enlarged image.
DISC MENU
1
2
Press MENU. The disc menu is displayed.
1
Press ZOOM during playback or still playback to activate the Zoom
function. If you press ZOOM repeatedly, the magnification level
increases up to six steps.
To remove the disc menu, press MENU again.
DVD-V
CAMERA ANGLE
2
3
Use the
buttons to move through the zoomed picture.
If the disc contains scenes recorded at different camera angles, you can
change to a different camera angle during playback.
Press CLEAR to resume normal playback or return to the paused
image.
•
Press ANGLE repeatedly during playback to select a desired angle.
The number of the current angle appears on the display.
NOTE
1 /1
The zoom function may not work for some DVDs.
DVD-V
VCD 2.0
VCD 1.1
DVD-V
MARKER SEARCH
CHANGING THE AUDIO LANGUAGE
Press AUDIO repeatedly during playback to hear a different audio
language or audio track.
You can start playback from a memorized point. Up to nine points can
be memorized. To enter a mark, follow these steps.
1
1 ENG
D
5.1 CH
1
2
During disc playback, press MARKER when playback reaches the
spot that you want to memorize. The Marker icon will appear on the
TV screen briefly.
PPCM
5 CH
VCD 2.0
VCD 1.1
Repeat step 1 to enter up to nine Marker points on a disc.
CHANGING THE AUDIO CHANNEL
Press AUDIO repeatedly during playback to hear a different audio
channel (STER., LEFT or RIGHT).
MARKER SEARCH
1/9
DVD-V
To Recall a Marked Scene
SUBTITLES
1
During disc playback, press SEARCH. The MARKER SEARCH menu
will appear on the screen.
Press SUBTITLE repeatedly during playback to see the different subtitle
languages.
2
Within 10 seconds, press
want to recall.
to select a Marker number that you
ABC
1 ENG
3
4
Press ENTER. Playback will start from the marked scene.
To remove the MARKER SEARCH menu, press SEARCH.
NOTE
If “ ” appears, the feature is not available on the disc.
To clear a Marked Scene
1
During disc playback, press SEARCH. The MARKER SEARCH menu
will appear on the screen.
2
3
4
5
Press
to select the Marker number that you want to erase.
Press CLEAR. The Marker number will be erased from the list.
Repeat steps 2 and 3 to erase additional Marker numbers.
To remove the MARKER SEARCH menu, press SEARCH.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
OPERATION WITH AUDIO CD AND MP3 / WMA DISC
PLAYING AN AUDIO CD AND MP3 / WMA DISC
NOTES ON MP3/WMA RECORDINGS
ABOUT MP3
CD
MP3
WMA
The DVD Player can play MP3/WMA formatted recordings on CD-ROM,
CD-R or CD-RW discs. Before playing MP3/WMA recordings, read the
notes on MP3/WMA Recordings on right.
•
An MP3 file is audio data compressed by using the MPEG1 audio
layer-3 file-coding scheme. We call files that have the “.mp3” file
extension “MP3 files”.
•
The player can not read an MP3 file that has a file extension other
than “.mp3”.
1
Insert a disc and close the tray.
Audio CD; Audio CD menu appears on the TV screen go to step 4.
MP3 / WMA disc; The MP3/WMA-JPEG choice menu appears on
the TV screen. Go to step 2
ABOUT WMA (WINDOW MEDIA AUDIO)
•
•
An WMA file is a Microsoft audio compression technology.
WMA (Windows Media Audio) offers double the audio compression
of the MP3 format.
MP3 WMA
JPEG
MP3 / WMA Disc compatibility with this player is limited as
follows:
2
Press
to select the MP3/WMA then press ENTER.
The MP3/WMA menu appears on the TV screen. Press RTN to move
to the MP3/WMA-JPEG choice menu.
1
Sampling Frequency / only at 44.1 kHz (MP3), 22.05 - 44.1 kHz
(WMA)
2
3
4
Bit rate / within 32 - 320 kbps (MP3), 32 - 196 kbps (WMA)
CD-R physical format should be “ISO 9660”
Program
MP3 WMA
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Folder8
If you record MP3/WMA files using the software which cannot
create a FILE SYSTEM, for example “Direct-CD” etc., it is impossible
to playback MP3/WMA files. We recommend that you use “Easy-
CD Creator”, which creates an ISO9660 file system.
A single session disc requires MP3/WMA files in the first track. If
there is no MP3/WMA file in the 1st track, it cannot playback
MP3/WMA files. If you wish to playback MP3/WMA files, format all
the data in the disc or use a new one.
Clear All
OFF
00:00
5
6
3
4
Press
to select a folder, and ENTER.
A list of files in the folder appears.
File names should be named using 8 letters or less and must
incorporate “.mp3” or “.wma” extension e.g. “********.MP3” or
“********.WMA”.
Press
to select a track then press PLAY or ENTER.
Playback starts. During playback, the current track’s elapsed playing
time will appear on the display window and menu. Playback will
stop at the end of the disc.
7
8
Do not use special letters such as / : \ * ? “ < >” etc.
Total number of files on the disc should be less than 650. This DVD
player requires discs/recordings to meet certain technical standards
in order to achieve optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are many different types
of recordable disc formats (including CD-R containing MP3 or WMA
files) that require certain pre-existing conditions (see above) to insure
compatible playback.
Press TITLE to move to the next page.
Press MENU to move to the previous page.
Program
Program
MP3 WMA
CD
TRACK01
TRACK 1.mp3
TRACK02
TRACK03
TRACK04
TRACK05
TRACK06
TRACK07
TRACK08
TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 8.mp3
Clear All
OFF
Clear All
NORM.
Customers should also note that permission is required in order
to download MP3/WMA files and music from the Internet. NAD
Electronics International has no right to grant such permission.
Permission should always be sought from the copyright owner.
00:00
1
0: 56: 18
STER.
Audio CD menu
MP3/WMA menu
MP3
WMA
TIP
5
PAUSE CD
1
2
If you are in a file list and want to return to the Folder list, use the
to highlight and press ENTER to return to the previous
menu screen.
Press PAUSE/STEP during playback.
To return to playback, press PLAY or press PAUSE/STEP again.
CD
MP3
WMA
MOVING TO ANOTHER TRACK
To stop playback at any other time, press STOP.
•
Press SKIP
or
briefly during playback to go to the next track
or to return to the beginning of the current track.
•
•
Press SKIP
twice briefly to step back to the previous track.
In case of audio CD, to go directly to any track, enter the track
number using the numbered buttons (0-9) during playback.
CD
MP3
WMA
REPEAT TRACK / ALL / OFF
1 To repeat the track currently playing, press REPEAT. The Repeat icon
and “TRACK” appears on the menu screen.
2 To repeat all tracks on a disc, press REPEAT a second time.
The Repeat icon and “ALL” appears on the menu screen.
3 To cancel Repeat mode, press REPEAT a third time. The Repeat icon
and “OFF” appears on the menu screen.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
OPERATION WITH AUDIO CD AND MP3 / WMA DISC
CD
MP3
WMA
SEARCH
1
Press and hold SCAN
or >
> during playback. The player will
now go into SEARCH mode.
Press and hold SCAN or
speed: X2, X4, X8 (backward) or
X8 (forward). Search speed and direction are indicated on the
menu screen.
To exit SEARCH mode, press PLAY.
2
repeatedly to select the required
X2, X4,
3
CD
MP3
WMA
RANDOM
1
Press RANDOM during playback or when playback is stopped. The
unit automatically begins Random Playback and RANDOM or
“RAND.” appears on the display window and menu screen.
To return to normal playback, press RANDOM repeatedly until
RANDOM or “RAND.” disappears on the display window and menu
screen.
2
CD
REPEAT A-B
To repeat a sequence:
1
2
During disc playback, press RPT A-B at your chosen starting point.
The Repeat icon and “A *” appears on the menu screen.
Press RPT A-B again at your chosen end point. The Repeat icon and
“A B” appears on the menu screen, and the sequence begins to play
repeatedly.
3
To exit the sequence and return to normal play, press RPT A-B again.
The Repeat icon and “OFF” appears on the menu screen.
CD
3D SURROUND
This unit can produce a 3D Surround effect, which simulates multi-
channel audio playback from two conventional stereo speakers, instead
of the five or more speakers normally required to listen to multichannel
audio from a home theater system.
1
2
Press DISP during playback.
Use
to select the sound option. The sound option will be
highlighted.
3
Use
to select “3D SUR”. To turn off the 3D Surround effect,
select “NORM”.
CD
CHANGING THE AUDIO CHANNEL
Press AUDIO repeatedly during playback to hear a different audio
channel (STER., LEFT, or RIGHT).
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
OPERATION WITH JPEG DISC
JPEG
VIEWING A JPEG DISC
MOVING TO ANOTHER FILE
Press SKIP or once during viewing a picture to advance to the
This DVD Player can play discs with JPEG files and Kodak picture CD.
Before playing JPEG recordings, read the notes on JPEG Recordings on
the right.
next file or to the previous file.
STILL PICTURE
1
2
Insert a disc and close the tray.
The MP3/WMA-JPEG choice menu appears on the TV screen.
1
Press PAUSE/STEP during slide show. The player will now go into
PAUSE mode.
2
To return to the slide show, press PLAY or press PAUSE/STEP again.
MP3 WMA
JPEG
TO FLIP THE PICTURE
Press
during showing a picture to flip the picture horizontally or a
Press
to select the JPEG then press ENTER.
vertically.
The JPEG menu appears on the TV screen.
TO ROTATE PICTURE
JPEG
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Folder8
Press
during showing a picture to rotate the picture clockwise or
counter clockwise.
NOTES ON JPEG RECORDINGS
•
Depending upon the size and number of the JPEG files, it could take
a long time for the DVD player to read the disc’s contents. If you
don’t see an onscreen display after several minutes, some of the files
are too big - reduce the resolution of the JPEG files to less than 2
mega pixels and burn another disc.
Off
Slide Speed
3
Press
to select a folder, and ENTER.
A list of files in the folder appears. Press RTN to move to the
MP3/WMA-JPEG choice menu.
•
•
Total number of files and folders on the disc should be less than 650.
Some disc may be incompatible due to different recording format or
condition of disc.
TIP
If you are in a file list and want to return to the Folder list, use the
buttons on the remote to highlight “
to return to the previous menu screen.
“ and press ENTER
•
When you are using software such as “Easy CD Creator” to burn the
jpeg files into the CD-R, ensure that all the selected files have the
“.jpg” extensions when copying into the CD layout.
If the files have “.jpe” or “.jpeg” extensions, please rename them as
“.jpg” files.
4
If you want to view a particular file, press
file and press ENTER or PLAY.
to highlight a
•
•
Viewing of the file starts. During viewing a file, press RTN to move
to the previous menu (JPEG menu).
Press TITLE to move to the next page.
Press MENU to move to the previous page.
Folder1
File names without “.jpg” extension will not be able to be read by
this DVD player. Even though the files are shown as JPEG image files
in windows explorer.
JPEG
Picture1.jpg
Picture2.jpg
Picture3.jpg
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
Off
5/32
1024X768
Slide Speed
5/32
1024X768 Picture5.jpg
TIP
5
There are three viewing Slide Speed options: Fast, Normal, Slow, and
Off. Press to highlight the Slide Speed then press to select
the option you want to use, and press ENTER.
To stop viewing at any other time, press STOP.
The JPEG menu appears.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
VCD 2.0
VCD 1.1
CD
MP3
WMA
PROGRAMMED PLAYBACK
PROGRAMMED PLAYBACK WITH AUDIO CD AND
MP3/WMA DISC
PROGRAMMED PLAYBACK WITH VIDEO CD
NOTE
The Program function enables you to store your favorite tracks from any
disc in the player memory.
On a Video CD with PBC, you must set PBC to Off on the setup
menu to use the Program function. See page xx
Program can contain 30 tracks.
1
2
Insert Video CD and close the tray.
1
Press PROGRAM during playback or in the stop mode to enter
the Program Edit mode.
Press PROGRAM while playback is stopped.
The mark will appear to the right of the word Program on the right
side of the menu screen.
The VCD Program menu will appear.
Program
E
VCD
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
NOTE
Press PROGRAM to exit the Program Edit mode; the
disappear.
E
mark will
Clear All
2
3
Select a track, and then press ENTER to place the selected
track on the Program list.
NOTE
Press RTN or PROGRAM to exit the Program menu.
Repeat step 2 to place additional tracks on the Program list.
3
4
Follow steps 2-6 of “Programmed Playback with Audio CD
and MP3/WMA disc” on left.
E
Program
E
Program
MP3 WMA
CD
TRACK 1
TRACK 12
TRACK 8
TRACK 10
TRACK 3
TRACK 8.mp3
TRACK 2.mp3
TRACK 4.mp3
TRACK 3.mp3
TRACK 1.mp3
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
TRACK 2.mp3
TRACK 3.mp3
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
TRACK 7.mp3
TRACK 8.mp3
To resume normal playback from programmed playback,
press PROGRAM.
“PROG.” indicator disappears in the display window.
Clear All
NORM.
Clear All
OFF
0: 56: 18
STER.
00:00
3
REPEAT PROGRAMMED TRACKS
Audio CD menu
Press
The programmed track you selected last is highlighted on the
program list.
MP3/WMA menu
•
•
•
To repeat the track currently playing, press REPEAT. The Repeat icon
and “TRACK” appears on the menu screen.
4
5
6
To repeat all tracks on the program list, press REPEAT a second time.
The Repeat icon and “ALL” appears on the menu screen.
To cancel Repeat mode, press REPEAT a third time. The Repeat icon
and “OFF” appears on the menu screen.
Press
to select the track you want to start playing.
Press TITLE to move to the next page.
ERASING A TRACK FROM PROGRAM LIST
1
Press MENU to move to the previous page.
Press PROGRAM during playback (Audio CD and MP3/WMA disc
E
only) or in the stop mode to enter the Program Edit mode. The
Press PLAY to start.
mark will appear.
Playback begins in the order in which you programmed the tracks
and “PROG.” appears on the menu screen.
Playback stops after all of the tracks on the Program list have played
once.
2
3
Press
Use
to move to the Program list.
to select the track that you wish to erase from the
Program list.
4
Press CLEAR. The track will be erased from the Program list.
7
To resume normal playback from programmed playback,
select a track of CD (or MP3/WMA) list and then press ENTER.
“PROG.” indicator disappears on the menu screen.
ERASING THE COMPLETE PROGRAM LIST
1
2
Follow steps 1-2 of “Erasing a Track from Program List” as above.
Use to select “Clear All”, and then press ENTER. The complete
Program for the disc will be erased. The programs are also cleared
when the disc is removed.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
ADDITIONAL INFORMATION
VCD 2.0
VCD 1.1
LAST CONDITION MEMORY
This player memorizes the user settings for the last disc that you have
viewed. Settings remain in memory even if you remove the disc from the
player or switch off the player. If you load a disc that has its settings
memorized, the latest stop position is automatically recalled.
SCREEN SAVER
The screen saver picture appears when you leave the DVD Player in stop
mode for about five minutes. After the Screen Saver has been engaged
for about five minutes, the DVD Player will automatically turn itself off.
VCD 2.0
VCD 1.1
VIDEO MODE SETTING
•
With certain discs, the playback picture may be flickering or Dot
Crawl is shown on straight lines. That means Vertical interpolation or
De-interlace is not perfectly matched with the disc. In this case, the
picture quality may be improved by changing the video mode.
To change the video mode, press and hold DISP about 3 seconds
during disc playback. The new video mode number selected is
displayed on the TV screen. Check whether the video quality has
improved. If not, repeat the above procedure until picture quality is
improved.
•
•
•
Video mode change sequence: MODE1 ➜ MODE2 ➜ MODE3 ➜
MODE1
If you turn off the power, the video mode will be back to initial state
(MODE1).
DETAILED DESCRIPTIONS FOR VIDEO MODES
MODE1: The source material of the DVD video (film material or video
material) is determined from disc information.
MODE2: Suitable for playing film based content or video based material
recorded by the progressive scan method.
MODE3: Suitable for playing video based content with comparatively
little motion.
NOTE
The video mode setting only works when the Progressive Scan mode
is set to “On” in the Setup menu.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
TROUBLESHOOTING
Check the following guide for the possible cause of a problem before contacting service.
SYMPTOM
CAUSE
CORRECTION
•
•
•
The power cord is disconnected.
•
•
•
Plug the power cord into the wall outlet securely.
No power.
No disc is inserted.
Insert a disc. (Check that the DVD or, audio CD
indicator in the display window is lit.)
The power is on, but the DVD player does not
work.
The TV is not set to receive DVD signal output.
Select the appropriate video input mode on the
TV so the picture from the DVD player appears
on the TV screen.
No picture.
•
The video cable is not connected securely.
The connected TV power is turned off.
•
Connect the video cable securely.
•
•
•
•
Turn on the TV.
The equipment connected with the audio cable
is not set to receive DVD signal output.
Select the correct input mode of the audio
receiver so you can listen to the sound from the
DVD player.
No sound.
•
The audio cables are not connected securely.
•
Connect the audio cable securely.
•
•
The power of the equipment connected with the
audio cable is turned off.
•
•
Turn on the equipment connected with the
audio cable.
The Digital Audio Output is set to the wrong
position.
Set the Digital Audio Output to the correct
position, then turn on the DVD player again by
pressing ON.
•
•
The disc is dirty.
•
•
Clean the disc.
The playback picture is poor.
No disc is inserted.
Insert a disc. (Check that the DVD or audio CD
indicator in the DVD display is lit.)
The DVD player does not start playback.
•
•
•
An unplayable disc is inserted.
•
•
•
Insert a playable disc. (Check the disc type, color
system, and Regional code.)
The disc is placed upside down.
The disc is not placed within the guide.
Place the disc with the playback side down.
Place the disc on the disc tray correctly inside the
guide.
•
•
The disc is dirty.
•
•
Clean the disc.
The Rating level is set.
Cancel the Rating function or change the rating
level.
•
The remote control is not pointed at the remote
sensor of the DVD player.
•
Point the remote control at the remote sensor of
the DVD player.
The remote control does not work properly.
•
•
•
The remote control is too far from the DVD
player.
•
•
•
Operate the remote control within 23 ft (7 m).
Remove the obstacle.
There is an obstacle in the path of the remote
control and the DVD player.
The batteries in the remote control are
exhausted.
Replace the batteries with new ones.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
TABLE OF LANGUAGES AND THEIR ABBREVIATIONS
Language Code List
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”
Code Language
6566 Abkhazian
6565 Afar
Code Language
7074 Fiji
Code Language
7678 Lingala
Code Language
8373 Singhalese
8375 Slovak
8376 Slovenian
8379 Somali
6983 Spanish
8385 Sudanese
8387 Swahili
8386 Swedish
8476 Tagalog
8471 Tajik
7073 Finnish
7082 French
7089 Frisian
7684 Lithuanian
7775 Macedonian
7771 Malagasy
7783 Malay
6570 Afrikaans
8381 Albanian
6577 Ameharic
6582 Arabic
7176 Galician
7565 Georgian
6869 German
6976 Greek
7776 Malayalam
7784 Maltese
7773 Maori
7289 Armenian
6583 Assamese
6588 Aymara
6590 Azerbaijani
6665 Bashkir
6985 Basque
6678 Bengali; Bangla
6890 Bhutani
6672 Bihari
7576 Greenlandic
7178 Guarani
7185 Gujarati
7265 Hausa
7782 Marathi
7779 Moldavian
7778 Mongolian
7865 Nauru
8465 Tamil
8484 Tatar
7387 Hebrew
7273 Hindi
7869 Nepali
8469 Telugu
8472 Thai
7879 Norwegian
7982 Oriya
7285 Hungarian
7383 Icelandic
7378 Indonesian
7365 Interlingua
7165 Irish
6679 Tibetan
8473 Tigrinya
8479 Tonga
8482 Turkish
8475 Turkmen
8487 Twi
6682 Breton
8065 Panjabi
6671 Bulgarian
7789 Burmese
6669 Byelorussian
7577 Cambodian
6765 Catalan
9072 Chinese
6779 Corsican
7282 Croatian
6783 Czech
8083 Pashto, Pushto
7065 Persian
8076 Polish
7384 Italian
8084 Portuguese
8185 Quechua
8277 Rhaeto-Romance
8279 Rumanian
8285 Russian
8377 Samoan
8365 Sanskrit
7168 Scots
7465 Japanese
7487 Javanese
7578 Kannada
7583 Kashmiri
7575 Kazakh
7589 Kirghiz
7579 Korean
7585 Kurdish
7679 Laothian
7665 Latin
8575 Ukrainian
8582 Urdu
8590 Uzbek
8673 Vietnamese
8679 Volapük
6789 Welsh
Gaelic 8779 Wolof
8872 Xhosa
7473 Yiddish
8979 Yoruba
9085 Zulu
6865 Danish
7876 Dutch
6978 English
8382 Serbian
8372 Serbo-Croatian
8378 Shona
6979 Esperanto
6984 Estonian
7079 Faroese
7686 Latvian, Lettish
8368 Sindhi
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
COUNTRY CODE LIST
Enter the appropriate code number for the initial setting “Country Code”
Code Country
Code Country
Code Country
Code Country
AD Andorra
ER
ES
ET
FI
Eritrea
LC
LI
Saint Lucia
Liechtenstein
Sri Lanka
Liberia
SC
SD
SE
SG
SH
SI
Seychelles
Sudan
AE
AF
United Arab Emirates
Afghanistan
Spain
Ethiopia
Finland
Fiji
LK
LR
LS
LT
Sweden
AG Antigua and Barbuda
Singapore
Saint Helena
Slovenia
AI
Anguilla
Albania
FJ
Lesotho
AL
FK
Falkland Islands
Lithuania
Luxembourg
Latvia Islands
Libya
AM Armenia
FM Micronesia
LU
LV
LY
SJ
Svalbard and
Jan Mayen
Slovak Republic
Sierra Leone
AN Netherlands Antilles
AO Angola
FO
FR
FX
Faroe Islands
France
SK
SL
AQ Antarctica
France (European
Territory)
MA Morocco
AR
AS
AT
Argentina
MC Monaco
SM San Marino
American Samoa
Austria
GA Gabon
MD Moldavia
SN
SO
SR
ST
Senegal
GB
Great Britain
MG Madagascar
MH Marshall Islands
MK Macedonia
ML Mali
Somalia
AU Australia
AW Aruba
GD Grenada
Suriname
GE
GF
Georgia
Saint Tome and Principe
Former USSR
El Salvador
Syria
AZ
BA
BB
BD
BE
BF
Azerbaidjan
French Guyana
SU
SV
SY
SZ
Bosnia-Herzegovina
Barbados
Bangladesh
Belgium
GH Ghana
MM Myanmar
MN Mongolia
MO Macau
GI
Gibraltar
GL
Greenland
Swaziland
Turks and Caicos Islands
Chad
GM Gambia
GN Guinea
MP Northern Mariana Islands
MQ Martinique (French)
MR Mauritania
MS Montserrat
MT Malta
TC
TD
TF
Burkina Faso
Bulgaria
BG
BH
BI
GP
Guadeloupe (French)
French Southern
Territories
Bahrain
GQ Equatorial Guinea
Burundi
GR
GS
Greece
TG
TH
TJ
Togo
BJ
Benin
S. Georgia &
S. Sandwich Isls.
Guatemala
MU Mauritius
Thailand
BM Bermuda
MV Maldives
Tadjikistan
Tokelau
BN
BO
BR
BS
BT
BV
Brunei Darussalam
GT
MW Malawi
TK
Bolivia
GU Guam (USA)
GW Guinea Bissau
GY Guyana
MX Mexico
TM Turkmenistan
Brazil
MY Malaysia
TN
TO
TP
TR
TT
TV
Tunisia
Bahamas
Bhutan
MZ Mozambique
NA Namibia
Tonga
HK
Hong Kong
East Timor
Turkey
Bouvet Island
HM Heard and McDonald
Islands
NC New Caledonia (French)
BW Botswana
NE
NF
Niger
Trinidad and Tobago
Tuvalu
BY
BZ
Belarus
Belize
HN Honduras
Norfolk Island
HR
HT
Croatia
Haiti
NG Nigeria
TW Taiwan
TZ Tanzania
CA Canada
NI
Nicaragua
Netherlands
CC Cocos (Keeling) Islands
HU Hungary
NL
UA Ukraine
UG Uganda
CF
Central African Republic
ID
IE
Indonesia
Ireland
Israel
NO Norway
CG Congo
NP
NR
Nepal
Nauru
UK
United Kingdom
CH Switzerland
IL
UM USA Minor Outlying
Islands
CI
CK
CL
Ivory Coast
Cook Islands
Chile
IN
IO
India
NU Niue
British Indian Ocean
Territory
Iraq
NZ
New Zealand
US
UY
UZ
VA
VC
United States
Uruguay
OM Oman
CM Cameroon
CN China
IQ
IR
PA
PE
PF
Panama
Uzbekistan
Iran
Peru
Vatican City State
Saint Vincent &
Grenadines
CO Colombia
IS
Iceland
Italy
Polynesia (French)
Papua New Guinea
Philippines
Pakistan
CR
CS
Costa Rica
IT
PG
PH
PK
PL
Former Czechoslovakia
JM
JO
JP
Jamaica
Jordan
Japan
VE
Venezuela
CU Cuba
VG Virgin Islands (British)
CV
CX
CY
CZ
DE
DJ
Cape Verde
Poland
VI
Virgin Islands (USA)
Vietnam
Christmas Island
Cyprus
KE
Kenya
PM Saint Pierre and Miquelon
VN
VU
KG Kyrgyzstan
PN
PR
PT
Pitcairn Island
Puerto Rico
Portugal
Vanuatu
Czech Republic
Germany
KH
KI
Cambodia6
Kiribati
WF Wallis and Futuna Islands
WS Samoa
Djibouti
KM Comoros
PW Palau
YE
YT
YU
ZA
Yemen
DK
Denmark
KN
KP
KR
Saint Kitts & Nevis Anguilla
PY
Paraguay
Mayotte
DM Dominica
North Korea
South Korea
QA Qatar
Yugoslavia
South Africa
DO Dominican Republic
RE
RO
RU
Reunion (French)
DZ
EC
EE
Algeria
KW Kuwait
Romania
ZM Zambia
ZR Zaire
ZW Zimbabwe
Ecuador
Estonia
KY
KZ
LA
LB
Cayman Islands
Russian Federation
Kazakhstan
Laos
RW Rwanda
EG
EH
Egypt
SA
SB
Saudi Arabia
Solomon Islands
Western Sahara
Lebanon
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
SPECIFICATIONS
GENERAL
Power requirements
Power consumption
Dimensions (approx.)
Weight (approx.)
AC 110-240V, 50/60 Hz
14W
435 X 55 X 241 mm (w x h x d)
2.4 kg
Operating temperature
Operating humidity
5˚C to 35˚C (41˚F to 95˚F)
5 % to 90 %
SYSTEM
Laser
Signal system
Semiconductor laser, wavelength 650 nm
NTSC
Frequency response
DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Signal-to-noise ratio
Harmonic distortion
Dynamic range
More than 100dB (ANALOG OUT connectors only)
Less than 0.008%
More than 100 dB (DVD)
More than 95 dB (CD)
OUTPUTS
VIDEO OUT
1 Vp-p 75 ohms, sync negative, RCA jack x 1
(Y) 1.0 V (p-p), 75 ohms, negative sync, Mini DIN 4-pin x 1
(C) 0.3 V (p-p) 75 ohms
S-VIDEO OUT
COMPONENT VIDEO OUT
(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 2
0.5 V (p-p), 75 ohms, RCA jack x 1
Audio output (digital audio)
Audio output (optical audio)
5 V (p-p), 75 ohms, Optical connector x 1
INPUTS
+ 12V Trigger input
center pin +12V at 50 mA, subminiature banana jack x 1
ACCESSORIES
Video cable
Audio cable
Remote control
Batteries
1
1
1
2
Design and specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories. Dolby, MLP Lossless and the double-D symbol are trademarks of Dolby Laboratories.
Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.
“DTS’ and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
29
Download from Www.Somanuals.com. All Manuals Search And Download.
©2003 NAD ELECTRONICS INTERNATIONAL
A DIVISION OF LENBROOK INDUSTRIES LIMITED
All rights reserved. No part of this publication may be reproduced, stored or transmitted in any form without the written permission of NAD Electronics International
T 513 Manual AH Version 10/03
Download from Www.Somanuals.com. All Manuals Search And Download.
|