S
P
E
C
F
I
L
E
The PT-DW6300LS and PT-DW6300LK are not equipped with a lens.
Product Number :
Product Name :
PT-DW6300S/DW6300K
PT-DW6300LS/DW6300LK
DLP™ Projectors
As of February 2009. Specifications subject to change without notice.
< 1 >
Download from Www.Somanuals.com. All Manuals Search And Download.
S
P
E
C
F
I
L
E
DLP™ Projectors
PT-DW6300S/DW6300K/DW6300LS/DW6300LK
RGB 2 IN:
R, G, B:
D-sub HD 15-pin x 1
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD/VD, SYNC: High impedance, TTL (positive/negative), 75 ohms
NOTE: HD/SYNC, and VD terminals do not accept tri-level sync signals.
Y: 1.0 Vp-p (including sync signal), PB/PR: 0.7 Vp-p, 75 ohms
BNC x 1, 1.0 Vp-p, 75 ohms
Y, PB, PR:
VIDEO IN:
Mini DIN 4-pin x 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
D-sub 9-pin x 1 (RS-232C compliant) for external controller
D-sub 9-pin x 1 for link control
M3 jack x 1 for wired remote control
M3 jack x 1 for link control
D-sub 9-pin x 1 for external control (parallel)
RJ-45 x 1 for network connection, 10Base-T/100Base-TX, compliant
with PJLink™
S-VIDEO IN:
SERIAL IN:
SERIAL OUT:
REMOTE 1 IN:
REMOTE 1 OUT:
REMOTE 2 IN:
LAN:
3.0 m (9´10˝)
Molded plastic
Power cord length:
Cabinet materials:
498 mm x 175 mm*4 x 440 mm*5 (19-19/32˝ x 6-7/8˝ *4 x 17-5/16˝ *5)
(with supplied lens)
498 mm x 175 mm*4 x 432 mm (19-19/32˝ x 6-7/8˝ *4 x 17˝)
(without lens)
Dimensions (W x H x D): PT-DW6300S/DW6300K:
PT-DW6300LS/DW6300LK:
Approx. 16.0 kg (35.3 lbs)(with supplied lens)
Approx. 15.2 kg (33.5 lbs)(without lens)
0°–45°C (32°–113°F)
Weight:
PT-DW6300S/DW6300K:
PT-DW6300LS/DW6300LK:
Operating temperature:
Operating humidity:
20%–80% (no condensation)
Power cord, Wireless/wired remote control unit, Batteries for remote
control (x 2), Wire rope
Supplied Accessories
Optional Accessories
Zoom lens (1.4–2.0:1)
Zoom lens (2.4 – 3.8:1)
Zoom lens (3.8–5.7:1)
Zoom lens (5.6–9.0:1)
Fixed-focus lens (0.8:1)
Ceiling mount bracket:
ET-DLE150
ET-DLE250
ET-DLE350
ET-DLE450
ET-DLE055
ET-PKD56H (for high ceilings)
ET-PKD55S (for low ceilings)
Weights and dimensions shown are approximate. Specifications subject to change without notice.
*1 In Standby mode eco, LAN-based network functions such as the standby ON function will not operate.
*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*3 The HD/SYNC and VD inputs do not accept the tri-level sync signal.
*4 With legs at shortest position.
*5 Including the supplied lens.
As of February 2009
< 3 >
Download from Www.Somanuals.com. All Manuals Search And Download.
S
P
E
C
F
I
L
E
DLP™ Projectors
PT-DW6300S/DW6300K/DW6300LS/DW6300LK
Dimensions
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
The illustration shows the PT-DW6300S/DW6300K.
416 (16-3/8˝)
498 (19-19/32˝)
Terminals
1
2
3
4
5
1
2
3
4
5
6
Video input
7
8
9
Remote 1 input
Remote 1 output
Remote 2 input
S-Video input
RGB 1 input
RGB 2 Input
DVI-D input
LAN connector
R/PR
G/Y
B/PB
SYNC/HD
VD
S-VIDEO IN
OUT
VIDEO IN
IN
RGB1 IN
RGB2 IN
DVI-D I N
LAN
10 Serial input
11 Serial output
IN
SERIAL
OUT
REMOTE 1
REMOTE 2
6
7
8
9
10
11
As of February 2009
< 4 >
Download from Www.Somanuals.com. All Manuals Search And Download.
S
P
E
C
F
I
L
E
DLP™ Projectors
PT-DW6300S/DW6300K/DW6300LS/DW6300LK
Standard setting-up position (when installed using the ET-PKD56H)
*1 When the lens protrudes to the maxi-
mum.
185 mm (7-9/32˝) with the supplied lens
212 mm (8-11/32˝) with the ET-DLE150
213 mm (8-3/8˝) with the ET-DLE250
219 mm (8-5/8˝) with the ET-DLE350
263 mm (10-11/32˝) with the ET-DLE450
195 mm (7-11/16˝) with the ET-DLE055
Upper edge of projected image
L
*2 Adjustable in 40 mm (1-9/16˝) steps.
1
*
256
(10-1/32˝)
Projected image
L
Lower edge of projected image
unit : mm (inch)
L
Projected image
100
(3-15/16˝)
400
(15-3/4˝)
C A U T I O N
The ET-DLE055 has a fixed short-focus lens. Therefore, the lens shift function provided in the main
unit cannot be used.
If the lens shift function is used, the corners of images may not be displayed or images may remain
out of focus in some cases.
As of February 2009
< 5 >
Download from Www.Somanuals.com. All Manuals Search And Download.
S
P
E
C
F
I
L
E
DLP™ Projectors
PT-DW6300S/DW6300K/DW6300LS/DW6300LK
Projection distance for 16:10 aspect ratio screen
Unit: millimeters
Screen
size
(inch,
Distance to screen (L)
Height from the edge
of screen to
center of lens (H)
Zoom
Fixed-focus
diagonal)
Zoom
lenses
Fixed-
focus
lens*
ET-DLE150
Zoom lens
Supplied lens
ET-DLE250
Zoom lens
ET-DLE350
Zoom lens
ET-DLE450
Zoom lens
ET-DLE055
Fixed-focus
lens
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
50
60
1,447
1,748
2,048
2,348
2,649
2,949
3,549
4,450
5,952
2,116
2,549
2,983
3,416
3,849
4,282
5,149
6,448
8,614
1,922
2,320
2,717
3,114
3,512
3,909
4,704
5,896
2,557
3,081
3,605
4,130
4,654
5,178
6,226
7,799
2,542
3,067
3,591
4,116
4,640
5,165
6,214
4,063
4,891
5,719
6,548
7,376
8,204
9,861
3,999 6,112
4,826 7,361
5,652 8,611
6,479 9,860
7,306 11,109
8,133 12,359
9,786 14,857
12,266 18,605
16,400 24,852
20,534 31,098
24,668 37,345
32,936 49,838
41,203 62,331
49,471 74,824
5,957
9,595
871
1,055
1,239
1,423
1,607
1,791
2,158
2,710
3,629
–
-67 – 337
-81 – 404
-94 – 471
-108 – 538
-121 – 606
-135 – 673
-162 – 808
-202 – 1010
-269 – 1,346
-337 – 1,683
-404 – 2,019
-538 – 2,692
-673 – 3,365
-808 – 4,039
337
404
471
538
606
673
808
1010
1,346
–
7,208 11,573
8,460 13,552
9,711 15,531
10,963 17,510
12,215 19,488
14,718 23,446
18,473 29,382
24,731 39,276
30,989 49,169
37,248 59,063
49,764 78,850
62,280 98,637
74,797 118,425
70
80
90
100
120
150
200
250
300
400
500
600
7,787 12,346
7,884 10,420 10,410 16,488
9,871 13,041 13,032 20,630
7,453 10,780
8,955 12,946 11,858 15,662 15,654 24,771
11,958 17,278 15,832 20,903 20,899 33,055
14,960 21,610 19,807 26,145 26,144 41,338
17,963 25,942 23,781 31,387 31,389 49,622
–
–
–
–
–
–
–
–
Unit: feet
Screen
size
(inch,
Distance to screen (L)
Height from the edge
of screen to
center of lens (H)
Zoom
Fixed-focus
diagonal)
Zoom
lenses
Fixed-
focus
lens*
ET-DLE150
Zoom lens
Supplied lens
ET-DLE250
Zoom lens
ET-DLE350
Zoom lens
ET-DLE450
Zoom lens
ET-DLE055
Fixed-focus
lens
min. max.
min. max.
min. max.
min. max.
min. max.
50
60
4.8
5.8
7.0
8.4
6.4
7.7
8.4
10.2
11.9
13.6
15.3
17.0
20.5
25.6
34.2
42.8
51.4
68.6
85.8
8.4
10.1
11.8
13.6
15.3
17.0
20.4
25.6
34.2
42.8
51.4
13.4
16.1
18.8
21.5
24.2
27.0
32.4
40.6
54.1
67.7
81.3
13.2
15.9
18.6
21.3
24.0
26.7
32.2
40.3
53.9
20.1
24.2
28.3
32.4
36.5
40.6
48.8
61.1
81.6
19.6
23.7
27.8
31.9
36.0
40.1
48.3
60.7
31.5
38.0
44.5
51.0
57.5
64.0
77.0
96.4
2.9
3.5
4.1
4.7
5.3
5.9
7.1
8.9
12.0
–
-0.2 – 1.1
-0.3 – 1.4
-0.4 – 1.6
-0.4 – 1.8
-0.4 – 2.0
-0.5 – 2.3
-0.6 – 2.7
-0.7 – 3.4
-0.9 – 4.5
-1.2 – 5.6
-1.4 – 6.7
-1.8 – 8.9
-2.3 – 11.1
-2.7 – 13.3
1.1
1.4
1.6
1.8
2.0
2.3
2.7
3.4
4.5
–
70
6.8
9.8
9.0
80
7.8
11.3
12.7
14.1
16.9
21.2
28.3
35.4
42.5
56.7
70.9
85.2
10.3
11.6
12.9
15.5
19.4
25.9
32.4
39.0
52.0
65.0
90
8.7
100
120
150
200
250
300
400
500
600
9.7
11.7
14.6
19.6
24.5
29.4
39.3
49.1
59.0
81.2 128.9
101.7 161.4
122.3 193.8
163.3 258.7
204.4 323.7
245.4 388.6
67.4 102.1
81.0 122.6
108.1 163.6
135.2 204.5
162.4 245.5
–
–
68.6 108.5
85.8 135.7
103.0 162.9
–
–
–
–
78.1 103.0
–
–
•
•
•
•
The value for L (distance to screen) varies slightly depending on the zoom lens characteristics.
At the shortest projection distance, the zoom lens characteristics may cause slight image distortion.
When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
The brightness varies depending on the zoom setting.
As of February 2009
< 6 >
Download from Www.Somanuals.com. All Manuals Search And Download.
S
P
E
C
F
I
L
E
DLP™ Projectors
PT-DW6300S/DW6300K/DW6300LS/DW6300LK
Projection distance for 16:9 aspect ratio screen
Unit: millimeters
Screen
size
(inch,
Distance to screen (L)
Height from the edge
of screen to
center of lens (H)
Zoom
Fixed-focus
diagonal)
Zoom
lenses
Fixed-
focus
lens*
ET-DLE150
Zoom lens
Supplied lens
ET-DLE250
Zoom lens
ET-DLE350
Zoom lens
ET-DLE450
Zoom lens
ET-DLE055
Fixed-focus
lens
min.
max.
min.
max.
min.
max.
min.
max.
min.
max.
50
60
1,489
1,798
2,106
2,415
2,724
3,032
3,650
4,576
6,119
2,176
2,622
3,067
3,512
3,957
4,403
5,293
6,629
8,855
1,977
2,386
2,794
3,203
3,611
4,020
4,837
6,062
2,630
3,169
3,707
4,246
4,785
5,324
6,401
8,017
2,615
3,154
3,693
4,233
4,772
5,311
4,178
5,029
5,880
6,732
7,583
8,435
4,114 6,286
4,963 7,570
5,813 8,854
6,663 10,138
7,513 11,422
8,362 12,706
10,062 15,274
12,611 19,126
16,860 25,546
21,109 31,967
25,358 38,387
33,855 51,227
42,353 64,068
50,850 76,908
6,131
9,870
897
1,086
1,275
1,464
1,653
1,842
2,220
2,786
3,731
–
-137 – 311
-164 – 374
-192 – 436
-219 – 498
-247 – 560
-274 – 623
-329 – 747
-411 – 934
-548 – 1,245
-685 – 1,557
-822 – 1,868
-1,096 – 2,491
-1,370 – 3,113
-1,644 – 3,736
311
374
436
498
560
623
747
934
1,245
–
7,417 11,903
8,703 13,937
9,990 15,971
11,276 18,005
12,563 20,038
15,136 24,106
18,995 30,207
25,427 40,376
31,859 50,544
38,292 60,713
51,156 81,051
64,020 101,388
76,885 121,725
70
80
90
100
120
150
200
250
300
400
500
600
6,389 10,137
8,006 12,692
8,105 10,711 10,701 16,948
7,662 11,081 10,147 13,405 13,397 21,205
9,205 13,307 12,189 16,099 16,092 25,462
12,292 17,760 16,274 21,486 21,482 33,976
15,378 22,212 20,359 26,874 26,873 42,490
18,464 26,665 24,444 32,261 32,264 51,004
–
–
–
–
–
–
–
–
Unit: feet
Screen
size
(inch,
Distance to screen (L)
Height from the edge
of screen to
center of lens (H)
Zoom
Fixed-focus
diagonal)
Zoom
lenses
Fixed-
focus
lens*
ET-DLE150
Zoom lens
Supplied lens
ET-DLE250
Zoom lens
ET-DLE350
Zoom lens
ET-DLE450
Zoom lens
ET-DLE055
Fixed-focus
lens
min. max.
min. max.
min. max.
min. max.
min. max.
50
60
4.9
5.9
7.2
8.7
6.5
7.9
8.7
10.4
12.2
14.0
15.7
17.5
21.1
26.4
35.2
44.0
52.9
70.5
88.2
8.6
10.4
12.2
13.9
15.7
17.5
21.0
26.3
35.2
44.0
52.8
13.8
16.5
19.3
22.1
24.9
27.7
33.3
41.7
55.7
69.6
83.6
13.5
16.3
19.1
21.9
24.7
27.5
33.1
41.4
55.4
20.7
24.9
29.1
33.3
37.5
41.7
50.2
62.8
83.9
20.2
24.4
28.6
32.8
37.0
41.3
49.7
62.4
32.4
39.1
45.8
52.4
59.1
65.8
79.1
99.2
3.0
3.6
4.2
4.9
5.5
6.1
7.3
9.2
12.3
–
-0.5 – 1.0
-0.6 – 1.3
-0.7 – 1.5
-0.8 – 1.7
-0.9 – 1.9
-0.9 – 2.1
-1.1 – 2.5
-1.4 – 3.1
-1.8 – 4.1
-2.3 – 5.2
-2.7 – 6.2
-3.6 – 8.2
-4.5 – 10.3
-5.4 – 12.3
1.0
1.3
1.5
1.7
1.9
2.1
2.5
3.1
4.1
–
70
7.0
10.1
11.6
13.0
14.5
17.4
21.8
29.1
36.4
43.7
58.3
72.9
87.5
9.2
80
8.0
10.6
11.9
13.2
15.9
19.9
26.6
33.3
40.0
53.4
66.8
90
9.0
100
120
150
200
250
300
400
500
600
10.0
12.0
15.1
20.1
25.2
30.3
40.4
50.5
60.6
83.5 132.5
104.6 165.9
125.7 199.2
167.9 266.0
210.1 332.7
252.3 399.4
69.3 104.9
83.2 126.0
111.1 168.1
139.0 210.2
166.9 252.4
–
–
70.5 111.5
88.2 139.5
105.9 167.4
–
–
–
–
80.2 105.9
–
–
•
•
•
•
The value for L (distance to screen) varies slightly depending on the zoom lens characteristics.
At the shortest projection distance, the zoom lens characteristics may cause slight image distortion.
When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
The brightness varies depending on the zoom setting.
As of February 2009
< 7 >
Download from Www.Somanuals.com. All Manuals Search And Download.
S
P
E
C
F
I
L
E
DLP™ Projectors
PT-DW6300S/DW6300K/DW6300LS/DW6300LK
Calculation of the projection distance
For a screen size different from the above, use the equation below to calculate the projection distance.
Aspect ratio 16:10
ET-DLE150
Supplied lens
ET-DLE250
ET-DLE350
ET-DLE450
ET-DLE055
minimum
maximum
L (mm) = (diagonal screen size in inches) x 30.0 - 54.0
L (mm) = (diagonal screen size in inches) x 43.3 - 49.8
minimum
maximum
L (mm) = (diagonal screen size in inches) x 39.7 - 65.0
L (mm) = (diagonal screen size in inches) x 52.4 - 63.8
minimum
maximum
L (mm) = (diagonal screen size in inches) x 52.4 - 80.0
L (mm) = (diagonal screen size in inches) x 82.8 - 79.2
minimum
maximum
L (mm) = (diagonal screen size in inches) x 82.7 - 135.1
L (mm) = (diagonal screen size in inches) x 124.9 - 134.6
minimum
maximum
L (mm) = (diagonal screen size in inches) x 125.1 - 301.7
L (mm) = (diagonal screen size in inches) x 197.9 - 299.1
(fixed focus)
L (mm) = (diagonal screen size in inches) x 18.4 - 47.6
Aspect ratio 16:9
ET-DLE150
minimum
maximum
L (mm) = (diagonal screen size in inches) x 30.9 - 54.0
L (mm) = (diagonal screen size in inches) x 44.5 - 49.8
Supplied lens
ET-DLE250
ET-DLE350
ET-DLE450
ET-DLE055
minimum
maximum
L (mm) = (diagonal screen size in inches) x 40.8 - 65.0
L (mm) = (diagonal screen size in inches) x 53.9 - 63.8
minimum
maximum
L (mm) = (diagonal screen size in inches) x 53.9 - 80.0
L (mm) = (diagonal screen size in inches) x 85.1 - 79.2
minimum
maximum
L (mm) = (diagonal screen size in inches) x 85.0 - 135.1
L (mm) = (diagonal screen size in inches) x 128.4 - 134.6
minimum
maximum
L (mm) = (diagonal screen size in inches) x 128.6 - 301.7
L (mm) = (diagonal screen size in inches) x 203.4 - 299.1
(fixed focus)
L (mm) = (diagonal screen size in inches) x 18.9 - 47.6
•
Distances calculated with the above equations will include a slight error.
As of February 2009
< 8 >
Download from Www.Somanuals.com. All Manuals Search And Download.
S
P
E
C
F
I
L
E
DLP™ Projectors
PT-DW6300S/DW6300K/DW6300LS/DW6300LK
Shift range
Optical axis shift function allows to shift the position of a projected image as shown below.
• Floor mount
• Ceiling mount
H
(Width of
projected image)
0.1H
0.1H
Standard postition
of projected image
Standard postition
of projected image
0.1H
0.1H
H
(Width of
projected image)
Installable angle
Install the projector at an angle within the range shown below.
• Vertical direction
• Horizontal direction
The projector may be installed at a vertical
angle of 360°.
The projector may be installed at a horizontal
angle of 10°.
As of February 2009
< 9 >
Download from Www.Somanuals.com. All Manuals Search And Download.
S
P
E
C
F
I
L
E
DLP™ Projectors
PT-DW6300S/DW6300K/DW6300LS/DW6300LK
List of compatible signals
This projector supports RGB signals with horizontal frequencies of 15 to 91 kHz, vertical frequencies of
50 to 85 Hz and up to 150 MHz dot clock.
NOTE: The native resolution of this projector is 1,024 x 800 pixels. If the display resolution of the input signal is different from the
native resolution, image compression or expansion will be used to convert the input signal to a level within the native resolution.
Display mode
Display
resolution
(dots)1
Scanning frequency Dot clock Picture
Format
H
V
frequency quality2
(kHz)
(kHz)
(MHz)
NTSC/NTSC4.43/PAL-M/PAL60
PAL/PAL-N/SECAM
480i(525i)
A
A
720 x 480i
720 x 576i
720 x 480i
720 x 576i
720 x 483
720 x 576
1,280 x 720
15.7
15.6
15.7
15.6
31.5
31.3
45.0
37.5
33.8
28.1
27.0
27.0
28.1
33.8
67.5
56.3
31.5
37.9
31.5
35.0
37.9
37.5
43.3
35.2
37.9
48.1
46.9
53.7
49.7
39.6
48.4
56.5
60.0
65.5
68.7
80.0
96.7
64.0
67.5
76.7
68.7
39.6
47.8
41.3
49.7
60.0
64.0
80.0
91.1
64.0
82.2
55.9
75.0
65.3
66.6
74.0
59.9
50.0
59.9
50.0
59.9
50.0
60.0
50.0
60.0
50.0
24.0
24.0
50.0
60.0
60.0
50.0
70.1
85.1
59.9
66.7
72.8
75.0
85.0
56.3
60.3
72.2
75.0
85.1
74.6
50.0
60.0
70.1
75.0
81.6
85.0
100.0
120.0
71.2
74.9
85.0
75.1
49.9
59.9
50.0
59.8
60.0
60.0
75.0
85.0
60.0
75.0
59.9
60.0
60.0
59.9
60.0
−
−
VIDEO/S-VIDEO
YPBPR /RGB
13.5
13.5
27.0
27.0
74.3
74.3
74.3
74.3
74.3
74.3
74.3
74.3
148.5
148.5
25.2
31.5
25.2
30.2
31.5
31.5
36.0
36.0
40.0
50.0
49.5
56.3
57.3
51.9
65.0
75.0
78.8
86.0
94.5
105.0
130.0
94.2
108.0
121.5
100.0
65.3
79.5
68.0
83.5
108.0
108.0
135.0
157.5
108.0
155.9
106.5
162.0
146.3
138.5
154.0
A
576i(625i)
A
480p(525p)
576p(625p)
720/60p
A
YPBPR /RGB/DVI
A
AA
AA
A
720/50p
1080/60i
1,920 x 1,080i
1080/50i
A
1080/24p
A
1,920 x 1,080
1,920 x 1,080i
1,920 x 1,080
1080/24sF
1080/25p
A
A
1080/30p
A
1080/60p
A
1080/50p
A
VGA400
A
640 x 400
640 x 480
RGB/DVI
A
VGA480
A
A
A
A
A
SVGA
A
800 x 600
A
A
A
A
MAC16
A
832 x 624
XGA
A
1,024 x 768
A
A
A
A
A
A
A
MXGA
A
1,152 x 864
A
A
MAC21
A
1,152 x 870
1,280 x 768
1280 x 768
AA
AA
AA
AA
A
1280 x 800
1,280 x 800
MSXGA
1,280 x 960
SXGA
A
1,280 x 1,024
A
B
A
RGB
SXGA+
1,400 x 1,050
RGB/DVI
RGB
B
A
WXGA+
1,440 x 900
1,600 x 1,200
1,680 x 1,050
1,920 x 1,080
1,920 x 1,200
RGB/DVI
RGB
UXGA
B
A
WSXGA+
1920 x 1080
WUXGA3
RGB/DVI
A
A
1. The “i” appearing after the resolution indicates an interlaced signal.
2. The following symbols are used to indicate picture quality.
AA
A
Maximum picture quality can be obtained.
Signals are converted by the image processing circuit before picture is projected.
3. WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
As of February 2009
< 10 >
Download from Www.Somanuals.com. All Manuals Search And Download.
S
P
E
C
F
I
L
E
DLP™ Projectors
PT-DW6300S/DW6300K/DW6300LS/DW6300LK
Serial connector
The serial connector complies with RS-232C. To control the projector from a personal computer, com-
mands must be input through communication software, based on the format and satisfying the commu-
nication conditions shown below.
Pin assignments and signal names
No. Signal name Description
No. Signal name Description
1
2
3
4
5
–
NC
6
7
8
9
–
NC
TXD
RXD
–
Send data
Receive data
Connected internally
Ground
CTS
RTS
–
Connected internally
Connected internally
NC
GND
D-sub 9-pin (female)
Serial input
Pin assignments and signal names
No. Signal name Description
No. Signal name Description
1
2
3
4
5
–
NC
6
7
8
9
–
NC
RXD
TXD
–
Receive data
Send data
Connected internally
Ground
RTS
CTS
–
Connected internally
Connected internally
NC
GND
D-sub 9-pin (male)
Serial output
Communication conditions (factory setting)
Signal level
Synchronization method
Baud rate
RS-232C-compliant
Start-stop synchronization
9,600 bps
None
Parity
Character length
Stop bit
8 bits
1 bit
X parameter
S parameter
None
None
Basic format
Transmission from the computer begins with STX, then the ID, command, parameter, and ETX are sent
in this order. Add parameters according to the details of control.
STX
A D
I1 I2
;
C1 C2 C3
:
P1 P2... Pn
ETX
Semicolon
(1 byte)
End
Start
Colon
ID 2 characters
(2 bytes)
(1 byte)
Parameters
(1 byte)
(1 byte)
Command
(3 bytes)
(undefined length)
(Control and/or query commands)
ID designator:
01 to 64: Address number
0A to 0Z: Group ID
ZZ: All units (ID ALL)
CAUTIION
•
•
•
It may not be possible to send or receive commands for about 10 to 60 seconds when the lamp is first turned on. If this
occurs, wait for 60 seconds, then try sending or receiving again.
When sending multiple commands, be sure to wait for at least 0.5 second after receiving a response from the projector before
sending the next command.
Additional time is sometimes required for response due to processing inside the projector. Set the time-out period for com-
mand response to 10 seconds or more.
As of February 2009
< 11 >
Download from Www.Somanuals.com. All Manuals Search And Download.
S
P
E
C
F
I
L
E
DLP™ Projectors
PT-DW6300S/DW6300K/DW6300LS/DW6300LK
Projector
PC (DTE)
Cable specifications
NC
NC
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
NC
NC
NC
NC
NC
NC
Control commands
Command : Parameter
Function
Callback
PON
POWER (STANDBY)
Standby power on
Standby power off
DVI
PON
POF
POF
IIS:DVI
IIS:RG1
IIS:RG2
IIS:VID
IIS:SVD
LPM:0
INPUT SELECT
IIS:DVI
IIS:RG1
IIS:RG2
IIS:VID
IIS:SVD
LPM:0
RGB 1
RGB 2
Video
S-VideoAUX
Dual (two lamps)
Lamp 1
LPM:1
LAMP SELECT
LPM:1
LPM:2
Lamp 2
LPM:2
LPM:3
Single lamp
Shutter on
Shutter off
Off
LPM:3
OSH:0
SHUTTER
OSH:0
OSH:1
OSH:1
OFZ:0
FREEZE
OFZ:0
OFZ:1
On
OFZ:1
OAS
AUTO SETUP
OAS
VPM:NAT
VPM:STD
VPM:DYN
VPM:CIN
VPM:GRA
VXX:DLVI0=+00000
VXX:DLVI0=+00001
VXX:DLVI0=+00002
VXX:DLVI0=+00003
OTE:1
PICTURE MODE
Natural
VPM:NAT
VPM:STD
VPM:DYN
VPM:CIN
VPM:GRA
VXX:DLVI0=+00000
VXX:DLVI0=+00001
VXX:DLVI0=+00002
VXX:DLVI0=+00003
OTE:1
Standard
Dynamic
Cinema
Graphic
SYSTEM DAYLIGHT VIEW 2
Off
1
2
3
COLOR TEMPERATURE
Middle
OTE:2
High
OTE:2
OTE:4
User
OTE:4
OTE:10
Default
OTE:10
TSD:y1y2y3y4m1m2d1d2w
TST:h1h2m1m2s1s2
OOS:0
DATE
Date setting
Time setting
On-screen display on
On-screen display off
TSD:y1y2y3y4m1m2d1d2w
TST:h1h2m1m2s1s2
OOS:0
TIME
ON SCREEN
OOS:1
OOS:1
*
*
Do not send PON, POF, OSH, or OLP commands continuously in a short period of time. Doing so may burst the lamp or shorten the lamp
replacement cycle.
When a command that cannot be executed during standby mode is sent, the projector will send an ER401 command in reply.
As of February 2009
< 12 >
Download from Www.Somanuals.com. All Manuals Search And Download.
S
P
E
C
F
I
L
E
DLP™ Projectors
PT-DW6300S/DW6300K/DW6300LS/DW6300LK
Status asking commands
Command:Parameter Function
Callback
Description
QPW
QSH
QFZ
QIN
000
Main power status
Standby (Off)
On
Off
On
Off
On
DVI
001
0
Shutter function status
Freeze function status
Input signal status
1
0
1
DVI
RG1
RGB 1
RG2
RGB 2
VID
Video
SVD
S-Video
QOS
0
On-screen display status
Off
1
On
QST
p1p2p3p4p5
Projector run time
00000h–99999h
Q$L:1
Q$L:2
QSL
p1p2p3p4
Lamp 1 run time
Lamp 2 run time
Lamp operation mode status
0000h–9999h
0000h–9999h
Dual
p1p2p3p4
0
1
Single
2
Lamp 1
3
Lamp 2
QLP
QPM
0
Lamp power mode status
Picture mode status
High
Low
Natural
1
NAT
STD
Standard
DYN
dynamic
CIN
Cinema
GRA
Graphic
QVX:DLVI0
DLVI0=+00000
DLVI0=+00001
DLVI0=+00002
DLVI0=+00003
p1p2p3p4/p5p6p7p8 (*1)
System daylight view status
Temperature status
Off
1
2
3
QTM:0
QTM:1
QTM:2
QGD
p0 = Intake air
p1 = Exhaust air
p2 = DLP™ chip
yyyymmdd (day of week) (*2)
hhmmss (*3)
y1y2y3y4m1m2d1d2w
h1h2m1m2s1s2
Date setting status
Time setting status
QGT
1
2
3
p1p2p3p4: Celsius (°C), p5p6p7p8: Fahrenheit (°F)
*
*
*
Day of week: Monday = 1, Tuesday = 2, ... Sunday = 7
Set the date and time to UTC (universal time coordinated).
Command example
To set the on-screen display off, send the command as shown below.
STX
ADZZ ; OOS
:
30
ETX
Start
ID Address
Command
Parameter End
NOTE: When sending commands without parameters, a colon (:) is not necessary.
As of February 2009
< 13 >
Download from Www.Somanuals.com. All Manuals Search And Download.
S
P
E
C
F
I
L
E
DLP™ Projectors
PT-DW6300S/DW6300K/DW6300LS/DW6300LK
Notes on Projector Placement and Operation
The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the
following precautions.
1. Never place objects on top of the projector while it is operating.
2. Make sure there is an unobstructed space of 500 mm or more around the projector’s exhaust
openings.
3. Do not stack projector units directly on top of one another. If two units must be stacked for back-
up use in ordinary projection, use a method as shown below and provide ample space between the
units to ensure that exhaust heat does not accumulate near the intake opening or around the units.
Dual stacked projection is not recommended.
4. If the projector is placed in a box or enclosure, ensure the temperature of the air surrounding the
projector is between 0°C/32°F and 40°C/104°F*. Also make sure the projector’s intake and exhaust
openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is
not sucked into the intake openings.
*
Even when the ambient temperature near the intake opening is 40°C/104°F or lower, an accumulation of hot air inside the cabinet may
cause the protective circuit to activate and shut down the projector. Please give ample consideration to the design with regard to
ambient temperature conditions.
500 mm/19.2˝
500 mm/19.2˝
500 mm/19.2˝ or more
or more*
or more*
Do not stack projector
units directly on top of
one another.
100 mm/
3.9˝ or more
Direction of Air Intake and Exhaust
Intake
Exhaust
Operating the Projector Continuously
1. If the projector is to be operated continuously 24 hours a day, use the dual-lamp optical system’s alter-
nating lamp operation (lamp changer) function. The projector cannot be operated continuously 24 hours
a day in dual-lamp mode.
Allow a minimum of two hours per day of non-operation time.
2. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short
periods.
DLP and the DLP logo are trademarks of Texas Instruments.
PJLink is a registered trademark, or a trademark application has been filed, in Japan, the United States, and other countries and regions.
All other trademarks are the property of their respective trademark owners.
As of February 2009
< 14 >
Download from Www.Somanuals.com. All Manuals Search And Download.
|