NAD Blu ray Player T557 User Manual

®
T557  
Blu-ray Disc™ Player  
Owner’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
19 damage requiring Service - Unplug this product from the wall outlet  
and refer servicing to qualified service personnel under the following  
conditions:  
fcc warning  
Changes or modifications not expressly approved by the party responsible  
for compliance could void the user’s authority to operate the equipment.  
a) When the power-supply cord or plug is damaged.  
b) If liquid has been spilled, or objects have fallen into the product.  
c) If the product has been exposed to rain or water.  
induStrY canada requirement  
This Class B digital apparatus meets all requirements of the Canadian  
Interference-Causing Equipment Regulations.  
d) If the product does not operate normally by following the operating  
instructions. Adjust only those controls that are covered by the  
operating instructions as an improper adjustment of other controls  
may result in damage and will often require extensive work by a  
qualified technician to restore the product to its normal operation.  
e) If the product has been dropped or damaged in any way.  
f) when the product exhibits a distinct change in performance-this  
indicates a need for service.  
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN  
AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER  
TO THE PRESENCE OF UNINSULATEDDANGEROUS VOLTAGE”  
WITHIN THE PRODUCT’S ENCLOSURE THAT MAYBE OF  
SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC  
SHOCK TO PERSONS.  
20 replacement parts - When replacement parts are required, be  
sure the service technician has used replacement parts specified  
by the manufacturer or have the same characteristics as the  
original part. Unauthorized substitutions may result in fire, electric  
shock, or other hazards.  
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS  
INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT  
OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN  
THE LITERATURE ACCOMPANYING THE APPLIANCE.  
21 Safety check - Upon completion of any service or repairs to this  
product, ask the service technician to perform safety checks to  
determine that the product is in proper operating condition.  
22 wall or ceiling mounting - The product should be mounted to a wall  
or ceiling only as recommended by the manufacturer.  
23 heat - The product should be situated away from heat sources such as  
radiators, heat registers, stoves or other products (including amplifiers)  
that produce heat.  
warning  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS  
PRODUCT TO RAIN OR MOISTURE.  
caution  
Changes or modifications to this equipment not expressly approved by  
NAD Electronics for compliance could void the user’s authority to operate  
this equipment.  
caution  
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,  
FULLY INSERT.  
caution regarding placement  
To maintain proper ventilation, be sure to leave a space around the unit  
(from the largest outer dimensions including projections) that is equal to or  
greater than shown below.  
caution  
This equipment employs a Laser System. To ensure proper use of this  
product, please read this owner’s manual carefully and retain for future  
reference. Should the unit require maintenance, contact an authorized  
service location. Use of controls, adjustments or the performance of  
procedures other than those specified may result in exposure to laser  
radiation. To prevent direct exposure to laser beam, do not try to open the  
enclosure. Visible laser radiation when the enclosure is opened.  
do not Stare into beam.  
Left and Right Panels: 10 cm  
Rear Panel: 10 cm  
Top Panel: 50 cm  
warning  
If this product is used at 240VAC, a suitable attachment plug should be used.  
fcc notice  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference in a  
residential installation.  
This equipment generates, uses and can radiate radio frequency energy and if  
not installed and used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged to try  
to correct the interference by one or more of the following measures  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected  
Consult the dealer or an experienced radio/TV technician for help.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
This product is manufactured to comply with EMC Directive  
20004/108/EC and Low Voltage Directive 2006/95/EC.  
information about collection and diSpoSal of  
waSte batterieS (directive 2006/66/ec of the european  
parliament and the council of european union) (for  
european cuStomerS onlY)  
noteS on environmental protection  
At the end of its useful life, this product must not be disposed  
of with regular household waste but must be returned to a  
collection point for the recycling of electrical and electronic  
equipment. The symbol on the product, user’s manual and  
packaging, point this out.  
Batteries bearing any of these symbols indicate  
that they should be treated asseparate collection”  
and not as municipal waste. It is encouraged that  
necessary measures are implemented to maximize  
the separate collection of waste batteries and  
to minimize the disposal of batteries as mixed  
municipal waste.  
The materials can be reused in accordance with their markings. Through  
re-use, recycling of raw materials or other forms of recycling of old  
products, you are making an important contribution to the protection of  
our environment. Your local administrative office can advise you of the  
responsible waste disposal point.  
End-users are exhorted not to dispose waste  
batteries as unsorted municipal waste. In order  
to achieve a high level of recycling waste batteries, discard waste batteries  
separately and properly through an accessible collection point in your  
vicinity. For more information about collection and recycling of waste  
batteries, please contact your local municipality, your waste disposal service  
or the point of sale where you purchased the items.  
By ensuring compliance and conformance to proper disposal of waste  
batteries, potential hazardous effects on human health is prevented and  
the negative impact of batteries and waste batteries on the environment  
is minimized, thus contributing to the protection, preservation and quality  
improvement of the environment.  
record Your model number (now, while You can See it)  
The model and serial number of your new T 557 are located on the back of  
the cabinet. For your future convenience, we suggest that you record these  
numbers here:  
Model no: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Serial no.: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
NAD is a trademark of NAD Electronics International, a division of Lenbrook Industries Limited  
Copyright 2009, NAD Electronics International, a division of Lenbrook Industries Limited  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
table of contentS  
IMPORTANT SAFETY INSTRUCTIONS                                                  2  
USING THE T 557 - FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
USB MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
PLAYING AUDIO CD/MP3/WMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
VIEWING A PHOTO FILE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
DIVX PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
ADJUSTING THE PICTURE MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
ENJOYING BD-LIVE™ OR BONUSVIEW™ IN BD-VIDEO . . . . . . . . . . . . . . . 20  
SCREENSAVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
LAST SCENE MEMORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
USING THE T 557 – FUNCTION CONTROL. . . . . . . . . . . . . . . . . . . . . . . . .21  
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
SUBTITLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
PICTURE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
RPT (REPEAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
MARKER, SEARCH, CLEAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
INTRODUCTION  
GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
UNPACKING AND SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
CHOOSING A LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
DISC LOADING AND PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
ASSEMBLY OF RUBBER FOOT WITH PLASTIC FOOT . . . . . . . . . . . . . . . . . . .6  
QUICK START . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
REGION MANAGEMENT INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
PLAYABLE DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
ABOUT THE SYMBOL DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
BD-ROM DISC FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
BD-ROM DISC COMPATIBILITY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
IDENTIFICATION OF CONTROLS  
FRONT PANEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
REAR PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
BR 2 REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
REFERENCE  
REFERENCE TABLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23  
RESOLUTION SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
AUDIO OUTPUT SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
LANGUAGE CODE LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
AREA CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25  
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26  
NOTES ON DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26  
HANDLING DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
STORING DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
CLEANING DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27  
OPERATION  
USING THE T 557 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
USING THE HOME MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
DISPLAY THE T 557 SETUP MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
NAVIGATING THE SETUP MENU OSD AND MAKING CHANGES. . . . . . 11  
DISPLAY DISC OSD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
DISPLAY SETUP MENU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
LANGUAGE SETUP MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
AUDIO SETUP MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
LOCK SETUP MENU (APPLICABLE TO BD AND DVD PLAYBACK ONLY) . 15  
NETWORK SETUP MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
OTHERS SETUP MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
thank You for chooSing nad.  
The T 557 brings NAD’s penchant for performance to the exciting new  
Blu-ray Disc format. This Profile 2.0 Blu-ray Disc Player brims with the latest  
features and offers for the first time a true High Definition source for digital  
Home Theater systems.  
We encourage you to take a few minutes now to read right through this  
manual. Investing a little time here at the outset might save you a good  
deal of time later, and is by far the best way to ensure that you make the  
most of your investment in the T 557.  
As with all our products, NAD’sMusic Firstdesign philosophy guided the  
T 557’s design in such a way that it can confidently promise you state-  
of-the-art visual fidelity and audiophile-quality music listening for years  
to come. We have been careful to ensure that the T 557 is as musically  
transparent, faithful to every video detail and spatially accurate as possible,  
incorporating much of what we’ve learned from a quarter-century’s  
experience designing audio, video and home-theater components.  
One more thing: We urge you to register your T 557 ownership on the NAD  
Worldwide Web site:  
For warranty information contact your local distributor.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
getting Started  
UNPACKING AND SETUP  
what’S in the box  
Packed with your T 557 you will find:  
ASSEMBLY OF RUBBER FOOT wITH PLASTIC FOOT  
Step 1  
Insert rubber foot  
Squeeze to allow the  
rubber foot to clamp under  
the six flanges on the  
plastic foot  
An audio/video cable connector  
The BR 2 remote control with 2 (two) AA batteries  
A detachable AC power cord  
HDMI cable (European version model only)  
Set of rubber feet  
Plastic foot flange  
This owner’s manual  
Save the packaging  
Please save the box and all of the packaging in which your T 557 arrived.  
Should you move or otherwise need to transport your T 557, this is by far  
the safest container in which to do so. We’ve seen too many otherwise  
perfect components damaged in transit for lack of a proper shipping  
carton, so please: Save that box!  
CHOOSING A LOCATION  
Step 2  
Choose a location that is well ventilated (with at least several inches to both  
sides and behind), and that will provide a clear line of sight, within 23 feet/7  
meters, between the T 557’s front panel and your primary listening/viewing  
position. This will ensure reliable infrared remote control communications.  
The T 557 generates a modest amount of heat, but nothing that should  
trouble adjacent components. It is perfectly possible to stack the T 557 on  
top of other components.  
Rubber foot inserted  
DISC LOADING AND PLAYBACK  
There are two different disc sizes. Place the disc in the correct guide on the  
disc tray. If the disc is out of the guide, it may damage the disc and cause  
the T 557 to malfunction. “Check Discappears at the On-Screen Display  
(OSD) (“ERRORat the VFD), if the disc is placed upside down (and it is a  
single sided disc).  
The following are important tips when loading a disc  
QUICK START  
Do not push the disc tray while it is moving. Doing so may cause the  
T 557 to malfunction.  
In case you simply cannot wait to experience the performance of your new  
NAD T 557, we provide the followingQuick Startinstructions to get you  
underway.  
Do not push up the disc tray or put any objects other than discs on the  
disc tray. Doing so may cause the T 557 to malfunction.  
Keep your fingers well clear of the disc tray as it is closing. Be especially  
careful with children’s fingers around the closing disc tray, as there is a  
risk of personal injury.  
Please make all the connections to your T 557 with the unit unplugged. It is  
also advisable to power-down or unplug all associated components while  
making or breaking any signal or AC power connections.  
Press [ ], the disc tray is automatically closed. Playback of the first track  
starts if a CD is loaded. For BD, DVD, USB or other disc media, playback  
operation is accessible through their menu screen.  
plaY a blu-raY diSc  
1
Using a compatible HDMI connector, connect the T 557’s HDMI OUT to  
the corresponding HDMI input of your HDMI-compatible TV/monitor.  
Connect the supplied AC cord to the T 557 AC mains input and then  
plug into an AC outlet. Follow the same for your HDMI-compatible TV  
as applicable. Switch ON your TV and set it to the HDMI input where  
the T 557 is connected.  
2
NOTE  
Do not move the T 557 during playback. Doing so may damage the disc  
and the T 557.  
3
Press the [OPEN/CLOSE] button to switch ON the T 557 and at the same  
time open the disc tray.  
4
5
Load the Blu-ray disc in the disc tray.  
Press the front panel [PLAY/PAUSE] button or [ ] button of BR 2  
remote control to close the disc tray and start playback. You should hear  
audio and see an image on the TV/monitor. If one or the other fails to  
appear, check your TV/monitor’s input settings or the T 557 audio/video  
connections.  
Enjoy the movie but be sure to set aside time to read this manual  
thoroughly to set up and configure your T 557 according to your  
preference.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
getting Started  
REGION MANAGEMENT INFORMATION  
high-definition plaYback  
The T 557 is designed and manufactured to respond to the Region  
Management Information that is recorded on a DVD disc or Blu-ray disc. If the  
Region or BD code described on the disc does not correspond to the Region  
or BD code shown on the T 557 rear panel, the T 557 cannot play that disc. The  
disc tray automatically opens after the OSD briefly displays“This disc has been  
coded for Region _ only and will not play in this machine. Please eject this disc  
and play only on a Region _ player.“ (BD only) orCheck Regional Code”(DVD  
only)when an incompatible Region or BD disc is loaded.  
To view high-definition contents from BD-ROM discs, an HDTV is required.  
Some discs may require HDMI OUT for viewing of high-definition contents.  
Ability to view high-definition contents in BD-ROM discs maybe limited  
depending on the resolution of your TV.  
graphic planeS  
Two individual full HD resolution (1920x1080) graphic planes (layers) are  
available on top of the HD video layer. One plane is assigned to video-  
related, frame accurate graphics (like subtitles), and the other plane is  
assigned to interactive graphic elements, such as buttons or menus. For  
both planes, various wipes, fades and scroll effects may be available.  
PLAYABLE DISCS  
The T 557 has exceptional playability. It has support for the following disc  
formats  
Blu-ray Disc (BD), BD-R/RE discs that contain audio titles, DivX, MP3,  
WMA or Photo files.  
DVD-Video, DVD R, DVD RW discs that contain audio titles, Movie,  
DivX, MP3, WMA or Photo files.  
Audio CD, CD-R/-RW discs that contain audio titles, DivX, MP3, WMA or  
Photo files.  
Advanced Video Codec High Definition (AVCHD) format discs.  
menu Sound  
When you highlight or select a menu option, sound can be heard such as  
button clicks or a voice-over explaining the highlighted menu choice.  
multi-page/pop-up menuS  
With DVD-Video, playback is interrupted each time a new menu screen  
is accessed. Due to BD-ROM disc’s ability to preload data from the disc  
without interrupting playback, a menu can consist of several pages. You can  
browse through the menu pages or select different menu paths, while the  
audio and video remain playing in the background.  
advanced video codec high definition (avchd)  
AVCHD video format is recorded using the MPEG-4 AVC/H.264 video  
compression codec. It is a high definition digital video camera format  
used to record SD (standard definition) or HD (high definition) signals. The  
MPEG-4 AVC/H.264 format enables a HD video signal shot on a digital video  
camera recorder to be recorded on DVDs in the same way as that of SD  
television signal.  
interactivitY  
Certain BD-ROM Discs may contain animated menus and/or trivia games.  
uSer browSable SlideShowS  
With BD-ROM Discs, you can browse through various still pictures while the  
audio remains playing.  
“AVCHDand theAVCHDlogo are trademarks of Matsushita Electric  
Industrial Co., Ltd. and Sony Corporation.  
SubtitleS  
NOTES  
Depending on what is contained on the BD-ROM disc, you may be able to  
select different font styles, sizes and colors for some subtitles. Subtitles may  
also be animated, scrolled or faded in and out.  
You cannot playback discs other than those listed above. To do so may  
render the T 557 permanently inoperable.  
An AVCHD formatted disc will not play if it is not correctly finalized.  
Depending on the recording condition, some AVCHD format discs may  
not play.  
bd-j interactive capabilitY  
The BD-ROM format supports Java for interactive functions. “BD-Joffer  
content providers almost unlimited functionality when creating interactive  
BD-ROM titles.  
ABOUT THE SYMBOL DISPLAY  
may appear on your TV display during operation. This indicates that the  
function you entered or try to execute is not available on that specific disc or file.  
BD-ROM DISC COMPATIBILITY  
The T 557 supports BD-ROM Profile 2. Aside from the BONUSVIEW function,  
the T 557 supports BD-Live (BD-ROM version 2 Profile 2) discs that allow  
usage of interactive functions when the T 557 is connected to the internet.  
BD-ROM DISC FEATURES  
BD-ROM (Blu-ray Disc Read-Only Memory) is a commercially produced disc  
and available in the same capacities as that of regular Blu-ray discs. Other  
than conventional movie and video contents, BD-ROM has enhanced  
features such as interactive content, menu operations, pop-up menus,  
subtitle selection, slideshow and other features.  
The T 557 is also compatible with discs supporting BONUSVIEW (BD-ROM  
version 2 Profile 1 version 1.1/Final Standard Profile) that enables Virtual  
packages or Picture-in-Picture functions.  
BD-ROM Discs can store 25 GB (single layer) or 50 GB (dual layer) on a single  
sided disc - about 5 to 10 times the capacity of a DVD. BD-ROM Discs also  
support the highest quality HD video available in the industry (up to 1920 x  
1080) - large capacity means no compromise on video quality. Furthermore,  
a BD-ROM disc has the same familiar size and look as DVD.  
NOTES  
Viewing high-definition content and up-converting standard DVD  
content may require an HDMI-capable input or HDCP-capable DVI input  
on your display device.  
Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio are  
supported with maximum 7.1 channels when HDMI OUT is the selected  
audio output port.  
You can use the USB flash drive that is used to store some disc related  
information, including downloaded on-line content. The disc you are  
using will control how long this information is retained.  
The following BD-ROM disc features are disc dependent and will vary.  
Appearance and navigation of features will also vary from disc to disc.  
Some features may not be available on some discs.  
video highlightS  
The BD-ROM format for movie distribution supports three highly advanced  
video codecs, includingMPEG-2, MPEG4 AVC (H.264), and SMPTE VC1. The  
1920 x 1080 HD and 1280 x 720 HD video resolutions are also available.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
IDENTIFICATION OF CONTROLS  
front panel  
1
2
3
4
5
6
7
8
9
10  
1
StandbY: Press this button to switch ON the T 557. The display window  
will illuminate. If there is disc loaded, the display window will show the  
playback time status of the disc. If there is no disc loaded, the VFD will  
briefly showNO DISCand thereafter show the default displayHOME.  
7
8
Stop: Except for BD playback, pressing this button will stop and at  
the same time pause playback of the disc. Press [PLAY/PAUSE] button  
to resume play from the spot it was stopped. For BD playback, pressing  
the [STOP] button will fully stop the playback and will return you to the  
TITLE or MENU option of the disc.  
Pressing the [ ] button of the BR 2 will switch ON the T 557 from  
standby mode and at the same time open the disc tray. The T 557  
can also be switched ON by pressing the [ON] or [ ] buttons of the  
remote control. Pressing the standby button again turns the unit back  
uSb input: Connect an external USB device into this input. Refer also  
to theUSB MODEsection ofUSING THE T 557 – FEATURESunder the  
“OPERATIONmain heading.  
to standby mode. Unplug the AC power cord from the AC wall socket to  
completely shut down the T 557.  
9
home: Press to access all the media for playback and setup of the  
T 557. Refer also to theUSING THE HOME MENUsection ofUSING THE  
T 557under theOPERATIONmain heading.  
2
diSc traY: With the DISC TRAY open, insert a Blu-ray disc (BD), DVD,  
CD or other compatible media disc face down onto the tray.  
10 [  
] , [  
], enter: Press [  
] to skip forward or [  
]
“Check Discappears at the On-Screen Display (OSD) (“ERRORat the  
VFD), if the disc is placed upside down (and it is a single sided disc). The  
disc tray will then automatically open.  
to skip backward a track, file or chapter.  
Press [  
] to scan fast-forward or fast-reverse during playback.  
Each time the button is pressed, the speed increases until the maximum  
level is reached. The scanning speed is indicated by trailing icons or  
as shown in the OSD and may vary by disc type. The speed will be  
retained even after the button is released; press [PLAY/PAUSE] to resume  
normal playback.  
3
4
vacuum fluoreScent diSplaY (vfd): If there is disc loaded, the  
display window will show the elapsed playback time of the current  
track/file/chapter (and track number; applicable for CD playback only).  
If there is no disc inside, the display window will showHOME.  
remote SenSor: Point the BR 2 at the remote sensor and press the  
buttons. Do not expose the remote sensor of the T 557 to a strong light  
source such as direct sunlight or illumination. If you do so, you may not  
be able to operate T 557 with the remote control.  
The front panel [  
respectively simulate the same functions of the [  
] , [  
] and ENTER buttons  
] and ENTER  
buttons of the BR 2 remote control under the following conditions or  
options only  
Navigating through the HOME menu and SETUP menu.  
Select through MOVIE, MUSIC or PHOTO files as contained in a disc.  
distance: About 23 ft (7 m) from the front of the remote sensor  
angle: About 30° in each direction of the front of the remote sensor  
Outside of the above conditions, the [  
] and [  
]
5
6
open/cloSe: Press this button to open and close the disc tray.  
buttons normally function as SKIP and SCAN modes.  
plaY/pauSe: This dual-function button alternates between starting  
and stopping playback. Press this button to toggle between Play and  
Pause of a BD, DVD, CD or other compatible media disc. Press to start  
play or resume play after Pause. If the disc tray is open, press this button  
to automatically close the tray and start playback if a CD disc is loaded.  
NOTE  
Not all media support maximum speeds for scanning.  
During playback, press this button to stop playback temporarily,  
keeping the optical pickup at its current position on the disc. To resume  
playback at the exact point where it stopped, press [PLAY/PAUSE] again.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
IDENTIFICATION OF CONTROLS  
rear panel  
1
2
3
4
5
6
7
8
ATTENTION!  
Please make sure that the T 557 is powered off or unplugged before making any connections. It is also advisable to power down or unplug all associated  
components while making or breaking any signal or AC power connections.  
1
2
ac mainS input: The T 557 comes supplied with a separate AC Mains  
cable. Before connecting the cable to a live wall socket, ensure first  
that it is firmly connected to the T 557’s AC Mains input socket. Always  
disconnect the AC Mains cable plug from the live wall socket first,  
before disconnecting the cable from the T 557’s Mains input socket.  
IMPORTANT NOTICE  
If your HDMI equipped TV is not capable of decoding DTS or Dolby  
Digital Bitstream, set the T 557’s HDMI or SPDIF setting at the “Audio  
Setup Menu” to “PCM Stereo. There may be a rushing noise heard if your  
TV is not capable of decoding the DTS (or Dolby Digital) Bitstream; most  
TVs do not have this capability.  
component video out: Connect to the corresponding component  
video input of a compatible equipment like a monitor/television,  
projector, A/V receiver or processor. Be sure to observe consistency in  
connecting the appropriate Y, Pb, Pr jacks to the corresponding sources/  
inputs. Do not rely purely on the color coding of the jacks, which may  
not always be consistent among brands.  
7
local area network (lan) port: Using a commercially available  
straight LAN cable (Category 5/CAT5 or better with RJ45 connector),  
connect this LAN port to the corresponding port of your modem  
or router. By connecting the T 557 to broadband internet, you can  
playback a disc that offers BD-Live function. Refer also to theNETWORK  
SETUP MENUsection ofUSING THE T 557under theOPERATIONmain  
heading.  
3
4
5
video out: Connect to the corresponding composite video input of  
a compatible monitor/television, projector, A/V receiver or processor  
using quality dual-RCA cable designed for video signals.  
NOTES  
NAD is not responsible for any malfunction of the T 557 and/or the  
audio out: This analog audio output can be connected to the  
corresponding analog audio input of a compatible equipment like an  
amplifier, receiver, TV or stereo system.  
internet connection due to communication errors or malfunctions  
associated with your broadband internet connection or other connected  
equipment. Contact your Internet Service Provider (ISP) for assistance or  
the service bureau of your other equipment.  
digital out (coaxial, optical): The digital playback audio  
output signal is available at these ports. Connect the optical or coaxial  
digital OUT ports to the corresponding S/PDIF digital input of an  
amplifier, receiver, computer soundcard or other digital processors.  
Contact your ISP for policies, charges, content restrictions, service  
limitations, bandwidth, repair and other related issues pertinent to  
internet connectivity.  
Some disc related material available through internet may not be  
compatible with the T 557. Contact the producer of the disc for questions  
about such content availability or compatibility.  
6
hdmi out: Using a HDMI cable (supplied only for European version  
model), connect the HDMI OUT jack to the corresponding HDMI input  
jack of a compatible equipment like a HDTV, a projector or an A/V  
Receiver.  
8
ir in: This input is connected to the output of an IR (infrared) repeater  
(Xantech or similar) or the IR output of another component to allow  
control of the T 557 from a remote location. Most NAD products with IR  
OUT are fully compatible with the T 557.  
Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio are  
supported with maximum 7.1 channels when HDMI OUT is the selected  
audio output port. Make sure to connect to an amplifier or receiver with  
a built-in (Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Digital  
Plus, DTS-HD Master Audio and other applicable formats) decoder to  
playback applicable multichannel audio formats.  
WARNING  
Before connecting and disconnecting any HDMI cables, both the T 557  
and the ancillary source must be powered OFF and unplugged from the  
AC outlet. Failure to observe this practice may cause permanent damage  
to all equipment connected via HDMI sockets.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
IDENTIFICATION OF CONTROLS  
br 2 remote control  
1
2
3
on: Switch T 557 ON.  
7
8
9
title/pop-up: Display DVD title menu or  
BD-ROM pop menu, if available.  
off: Switch T 557 OFF.  
1
3
2
4
: Select an item in a menu.  
enter: Acknowledge menu selection.  
audio: Select an audio language.  
Subtitle: Select a subtitle language.  
zoom: Enlarge video image.  
picture: Display or exit the Picture Mode  
menu.  
diSp: Access on-screen display.  
rtn: Exit from a menu window.  
10 : Opens and closes the disc tray.  
: Stop playback.  
4
5
0-9 number buttons: Select numbered  
items in a menu.  
: Pause playback temporarily.  
: Go to beginning of current/  
previous track, file or chapter; go to next  
track/file/chapter.  
5
7
rpt: Repeat track, chapter, title, file, folder,  
all.  
clear: Remove a marker on the search  
menu or a number when setting the  
password.  
: Start playback.  
6
8
11 a,b,c,d : Navigate or select BD-ROM menu,  
if applicable; Page up/down PHOTO and  
MUSIC menu list.  
6
Scan  
: Fast reverse or forward  
search.  
reS: Set output resolution of HDMI and  
Component Video output.  
home: Display or exit HOME menu.  
marker: Mark desired scene for selective  
playback.  
9
Search: Display or exit the search menu.  
10  
11  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
uSing the t 557  
You may operate the T 557 from its front panel or via the BR 2 remote  
control. Since the remote control will be the primary controller for most  
cases, we will focus on remote-controlled operations. Be sure also to read  
the section, “IDENTIFICATION OF CONTROLS - FRONT PANEL”.  
DISPLAY DISC OSD  
You can display the general disc playback status on the TV screen. Some  
items can be changed using the menu. To use the on-screen display  
1
2
3
Press the BR 2’s [DISP] during playback.  
Press [  
] to select an item. The selected item is highlighted.  
USING THE HOME MENU  
Key-in the desired the number button, press [  
applicable.  
] or [ENTER] as  
From the Home Menu screen, you can access the Setup menu as well as  
select desired media for playback. If the Home Menu does not appear,  
check your applicable video connections.  
NOTES  
1
Press [HOME] and the Home Menu appears.  
The display feature may not be available for all disc media and is media  
dependent.  
Display disc OSD does not apply to audio only discs like CD and MP3/  
WMA files as they are already presented in their respective menu screens.  
If no button is pressed for about 15 seconds, the on-screen display  
disappears.  
DISPLAY SETUP MENU  
2
3
Use [  
] keys to select among the following menu options -  
Movie, Photo, Music or Setup. If there is no disc loaded, onlySetupis  
accessible from these Home Menu options.  
Press [ENTER] to select menu option.  
DISPLAY THE T 557 SETUP MENU  
The Setup Menu allows one to customize the operation of the T 557. If the  
factory defaults do not suit your taste, you will need to use the setup menu  
to configure the T 557 yourself.  
tv aSpect ratio  
Set TV ASPECT RATIO to select a picture size matching the aspect ratio of  
your TV/Monitor.  
Press the BR 2’s [HOME] button and then selectSetupfor the Setup Menu  
OSD to appear. With the use of the BR 2’s navigation buttons, you may  
select various menus.  
Select4:3 Letter Boxor4:3 Pan Scanwhen a standard 4:3 TV is connected.  
4:3 letter box: Displays a wide picture with bands on the upper and  
lower portions of the screen.  
NAVIGATING THE SETUP MENU OSD AND MAKING CHANGES  
To navigate through the Setup Menu OSD options, please do the following  
using the BR 2 remote control:  
4:3 pan Scan: Automatically displays the wide picture on the entire  
screen and cuts off the portions that do not fit.  
1
2
3
Use [  
Press [  
Use [  
item.  
] keys to move up or down the menu selections.  
] to move backward or forward a menu window.  
] keys to select through the options of a particular menu  
Select16:9 Originalor16:9 Fullwhen a 16:9 wide TV is connected.  
16:9 original: The 4:3 picture is displayed with an original 4:3 aspect  
ration, with black bars appearing at the left and right sides.  
16:9 full: The 4:3 pictures is adjusted horizontally (in a linear  
proportion) to fill the entire screen.  
4
5
Press [ENTER] to select a desired setting/selection.  
Press [RTN] to exit the Setup menu.  
NOTE  
“4:3 Letter Box” or “4:3 Pan Scan” are not selectable when the resolution  
is set to higher than 480i/480p (576i/576p).  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
uSing the t 557  
reSolution  
After resolution change, if you cannot see the screen, please wait for about  
20 seconds and the resolution will automatically revert back to the previous  
resolution or a message screen as below may appear  
The T 557 provides several video output resolutions for the HDMI OUT  
and COMPONENT VIDEO OUT jacks. Resolution can be changed via the  
“Resolutionoption in the DISPLAY SETUP menu or by toggling the [RES]  
button of the BR 2 remote control. The T 557 must be at STOP mode when  
BR 2’s [RES] button is used to change the RESOLUTION setting.  
The following resolutions are selectable or available  
auto: If the HDMI OUT jack is connected to a TV that provides display  
information, the T 557 automatically selects the resolution best suited  
to the connected TV. If COMPONENT VIDEO OUT is the selected video  
output media, the resolution changes toAutothe default resolution  
for Component Video OUT.  
1080p: Outputs 1080 lines of progressive video (applicable only for  
HDMI connection).  
1080i: Outputs 1080 lines of interlaced video.  
720p: Outputs 720 lines of progressive video.  
480p/576p: Outputs 480/576 lines progressive video.  
480i/576i: Outputs 480/576 lines of interlaced video.  
SelectYesfor the current resolution setting (the VFD will show the  
current resolution setting) to be applied. “Currentresolution setting is the  
suggested new resolution setting.  
Available resolution varies according to connection and media format.  
SelectNoto seek for the next applicable resolution setting. The above  
“Warningscreens will interchangeably be displayed until you selectYesto  
a suggested resolution setting.  
hdmi out connection  
For the 480i/576i resolution setting, the output resolution of HDMI OUT  
will change to 480p/576p.  
If you select a resolution manually and then connect the HDMI  
jack to TV and your TV does not accept it, the resolution setting will  
automatically be set toAuto.  
The 1080p video output frame rate may be automatically set to either  
24Hz or 50/60Hz depending upon the capability and preference of the  
connected TV and based on the native video frame rate of the BD-ROM  
disc’s contents.  
If you select a resolution that is not compatible with your TV, a warning  
message as shown below will appear.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
uSing the t 557  
component video out connection  
LANGUAGE SETUP MENU  
For the 1080p resolution setting with unprotected media, the  
COMPONENT VIDEO OUT resolution will change to 1080i.  
When a protected media is loaded for playback, 720p, 1080i or 1080p  
resolution settings of COMPONENT VIDEO OUT will change to either  
480i/576i or 480p/576p (depends upon the connectivity of a HDMI  
cable - plugged-in or unplugged).  
BD or DVD could prevent up-scaling on analog output.  
video out connection  
The resolution of the VIDEO OUT jack is fixed to 480i/576i.  
NOTES  
Depending on your display, some of the resolution settings may result  
to abnormal picture or the picture disappearing altogether. When this  
happens, press [HOME] key and then toggle [RES] repeatedly until the  
picture reappears.  
diSplaY menu  
Select a language for the SETUP menu and on-screen display.  
The T 557 supports simultaneous output of all video out jacks. The  
resolution of the HDMI output will not be the same as the resolution on  
the Component Video output.  
For a list of applicable resolution settings with respect to video output  
port and type of media, please refer also to the “RESOLUTION SETTINGS”  
section of “REFERENCE TABLES” under the “REFERENCE” main heading.  
diSc menu/audio/Subtitle  
Select the language you prefer for the audio track (disc audio), subtitles  
and the disc menu. Depending on the media, only those Disc Audio, Disc  
Subtitle and Disc Menu languages recorded on the media are available.  
When a language is chosen, it will become the default setting unless the  
media overrides the settings.  
1080p diSplaY mode  
original: Refers to the original language in which the disc was  
recorded.  
Movies shot with film camera consist of 24 frames per second. Since  
conventional televisions display frames either at 1/60 or 1/50 second  
intervals, the 24 frames do not appear at an even pace. The24Hzsetting of  
the T 557’s1080p Display Modeoption enables the faithful reproduction  
of such film-based materials, displaying each frame at 1/24 second intervals.  
24hz: Using an HDMI-equipped display compatible with 1080/24p  
input, set1080p Display Modeto24Hzfor smooth presentation of  
film-based materials.  
other: SelectOtherif the desired language is not on the list. Use [  
highlightOther, press [ENTER] and then input the 4-digit language code using  
the number keys of the remote control. If you enter the wrong language code,  
complete entering the 4-digit numbers, press [ENTER] and then encode the  
correct 4-digit numbers. SeeLANGUAGE CODE LISTunder the main heading  
“REFERENCEfor a list of applicable language codes.  
] to  
off: If you choose for the disc subtitle not to come up, selectOff.  
50/60hz: If24Hzis selected and some picture disturbance is  
experienced when the video switches between video and film material,  
set1080p Display Modeto50Hz(European version model only) or  
“60Hz(North America version model only) instead.  
NOTE  
If your TV is not compatible with 1080/24p, the actual frame frequency  
of the video output will be 50Hz (or 60Hz) even though the “1080p  
Display Mode” is set to “24Hz.  
hdmi color Setting  
Set the type of video output from HDMI OUT jack. Select the setting that  
matches your display device.  
Ycbcr: Select when connecting to an HDMI display device.  
rgb: Select when connecting to a DVI device.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
uSing the t 557  
AUDIO SETUP MENU  
Each DVD disc has a variety of audio output options. Set the T 557’s AUDIO  
options according to the type of audio system you use.  
hdmi/Spdif (digital audio output)  
Select the audio output setting for HDMI OUT or DIGITAL AUDIO OUT port.  
pcm Stereo: Select when connected to a two-channel digital stereo  
decoder.  
pcm multi-ch (hdmi only): Select when connected to a device with  
multi-channel decoder. This is applicable to HDMI OUT only.  
dtS re-encode: Select when connected to a device with DTS  
decoder.  
primary pass-thru: Select when connected to a device with LPCM,  
Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS and DTS-HD  
decoder.  
Refer also to theAUDIO OUTPUT SPECIFICATIONSsection ofREFERENCE  
TABLESunder theREFERENCEmain heading.  
Sample freq. (frequencY)  
Set the sampling frequency of the audio signal.  
48khz: If your receiver or amplifier is not capable of handling 96 kHz  
and 192 kHz signals, select 48 kHz. When this choice is made, this unit  
automatically converts any 96 kHz and 192 kHz signals to 48 kHz so your  
system can decode them.  
96khz: If your receiver or amplifier is not capable of handling 192 kHz  
signals, select 96 kHz. When this choice is made, this unit automatically  
converts any 192 kHz signal to 96 kHz so your system can decode them.  
192khz: If your receiver or amplifier is capable of handling 192 kHz  
signals, select 192 kHz. When this choice is made, a 192 kHz signal  
passes through without any further processing.  
Check the documentation of your amplifier to verify its capabilities.  
drc (dYnamic range control)  
You can select the effective dynamic range (subjective range from soft to  
loud) for playback of Dolby Digital or Dolby Digital Plus soundtracks. It  
is useful when you watch your favorite action movie without disturbing  
others at night.  
on: TheOnsetting is for late-night sessions or other times when you  
wish to retain maximum dialog intelligibility while minimizing overall  
volume levels.  
off: To maintain full dynamic range, set toOff.  
NOTE  
DRC setting can be changed only at STOP mode or when there is no disc  
loaded.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
uSing the t 557  
LOCK SETUP MENU (APPLICABLE TO BD AND DVD PLAYBACK ONLY)  
dvd rating  
The parental rating feature allows you to block access to scenes greater  
than the rating you set up, thereby preventing your children from viewing  
material you believe is unsuitable. To activateDVD Rating, please be  
guided by the following:  
1
While atDVD Ratingline menu, press [ ]. APasswordprompt will  
come up in the menu screen.  
2
3
Input the password you have setup.  
Upon entering the password, you can now set the parental rating level  
you prefer. Use [  
] to step through the rating levels.  
4
Press [ENTER] to confirm your rating selection.  
rating 1-8  
Rating1(Kids) has the most restrictions and Rating8(Adult) is the least  
restrictive.  
Some movies contain scenes that may not be suitable for children to view.  
Many of these discs contain parental control information that applies to  
the complete disc or to certain scenes on the disc. Movies and scenes are  
rated depending on the country. Some discs offer more suitable scenes as  
an alternative.  
unlock  
If you selectUnlock, parental lock is not active and the disc plays in full.  
NOTE  
If you set a rating level for the player, all disc scenes with the same rating  
level or lower are played. Higher rated scenes are not played unless an  
alternate scene is available on the disc. The alternative must have a  
lower rating. If no suitable alternative is found, playback stops. You must  
enter the 4-digit password in order to play the disc.  
paSSword  
When you access Lock Setup Menu for the first time, it is advised that you  
setup first your Password.  
1
2
While atPasswordline menu, press [ ] to selectNewoption.  
Press [ENTER]. Input your desired 4-digit password code. Press [ENTER]  
again.  
Should you forget your password, you can reset it by using the following  
steps.  
3
4
Enter again the 4-digit password code for verification.  
Press [ENTER]. You have now setup your Parental Rating password.  
1
2
3
Remove any disc loaded.  
SelectPasswordoption.  
Use the number button to enter210499.  
“PINCLRappears in the VFD and the password is reset.  
You can change the password for parental control. Enter your four-digit  
password when prompted on the screen.  
1
2
3
While atPasswordline menu, press [ ] to selectChangeoption.  
Press [ENTER].  
Enter your old four-digit password using the numeric buttons (0-9).  
Press [ENTER].  
bd rating  
Set an age limit for rated BD-ROM playback.  
1
While atBD Ratingline menu, press [ ]. APasswordprompt will  
come up in the menu screen.  
4
5
6
You will be prompted to enter your new password. Enter the new four-  
digit password using the numeric buttons (0-9). Press [ENTER].  
You will be prompted to verify your new password. Enter the new four-  
digit password again.  
2
3
Input the password you have setup.  
Upon entering the password, you can now set the age limit for BD  
viewing.  
255: All BD ROM can be played back.  
0 - 254: Prohibits playback according to the ratings recorded on the BD  
ROM.  
Press [ENTER]. The new four-digit password is now valid.  
The setup Password can be deleted by the following procedure  
4
Press [ENTER] to confirm your BD Age selection.  
1
While atPasswordline menu, press [ ] and then [ ] to select  
“Deleteoption.  
area code  
2
3
Press [ENTER].  
Enter the code of the country/area whose standards were used to rate your  
DVD. SeeAREA CODEunder the main headingREFERENCEfor a list of  
applicable area codes.  
Enter your four-digit password using the numeric buttons (0-9). Press  
[ENTER]. The password is now deleted.  
1
While atArea Codeline menu, press [ ]. APasswordprompt will  
come up in the menu screen.  
2
3
4
Input the password you have setup. Press [ENTER].  
Select the desiredArea Codeusing [  
] buttons.  
Press ENTER to confirm your area code selection.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
uSing the t 557  
NETwORK SETUP MENU  
2
3
After selecting eitherStaticorDynamic, clickOKto complete the  
network connection.  
After setting up the connection, a menu will prompt you test your  
network connection. ClickOKto complete the network connection  
and exit theCONNECTION SETTINGmenu.  
The NETWORK settings are needed to use the BD Live feature. By  
connecting the T 557 to the internet, special BD-ROM sites can be enabled  
by some BD-ROM discs. Online contents can be downloaded and watched  
if a BD-ROM site contains links to future movie trailers, bonus contents and  
other related features.  
4
IfTestis selected, the network connection status is displayed as in  
below  
Ensure proper broadband connectivity when configuring the following  
NETWORK features.  
connection Setting  
Press [ ] or [ENTER] to setup your network connection. Use the following  
procedure in setting up your connection.  
1
Upon selecting > or [ENTER], the CONNECTION SETTING as below is shown.  
Use [ ] to configure your connection with below OSD.  
5
SelectOKto exit connection setting/status OSD.  
Static: Select to set manually the IP address, Subnet Mask, Gateway and  
consequently the DNS Server settings.  
dynamic: Select to automatically allocate an IP address.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
uSing the t 557  
connection StatuS  
OTHERS SETUP MENU  
SelectingConnection Statuswill test and consequently display the status  
of your network connection. The status of your network connection will be  
displayed likeSuccess(as in above OSD) orFail.  
NOTES ON NETWORK CONNECTION  
NAD is not responsible for any malfunction of the T 557 and/or the  
internet connection feature due to communication errors/malfunctions  
associated with your broadband internet connection or other connected  
equipment.  
NAD is not responsible for the functionality or continued availability  
of the features of BD-ROM discs made available through the Internet  
Connection. Some disc related material available by the Internet  
Connection may not be compatible with the T 557. If you have questions  
about such content, please contact the producer of the disc.  
Any fees charged by an ISP including, without limitation, connection  
charges are your responsibility.  
A 10 Base-T or 100 Base-TX LAN port is required for wired connection to  
the T 557. If your internet service does not allow for such a connection,  
you will not be able to connect the T 557.  
Skin  
Change the background or wallpaper of the OSD. The defaultSkinis  
“Skin 1which is actually the NAD logo.  
initialize  
You can reset the player to its original factory settings or initialize the BD  
contents of the connected USB device.  
bd-live connection  
You can restrict Internet access when BD-Live functions are used.  
permitted: Internet access is permitted for all BD-Live contents.  
partially permitted: Internet access is permitted only for BD-Live  
contents that have content owner certificates. Internet access and  
AACS Online functions are prohibited for all BD-Live contents without  
a certificate.  
factory Set: Select to restore the T 557 to its factory default settings  
except the LOCK SETUP MENU settings.  
bd Storage clear: Delete the BD contents from the connected USB  
device.  
For both of the above options, the confirm message prompt appears to  
Advanced Access Content System (AACS) is a standard for content  
distribution and digital rights management, intended to restrict access  
to and copying of the next generation of optical discs and DVDs. The  
AACS standard has been adopted as the access restriction scheme for  
Blu-ray Disc.  
complete the selection. Use [  
[ENTER].  
] to selectYesorNoand then press  
divx vod  
DivX is the name of a revolutionary new video codec which is based on the  
new MPEG-4 compression standard for video. You will be able to play DivX  
discs using the T 557.  
prohibited: Internet access is prohibited for all BD-Live contents.  
divx reg. code: The registration code of your T 557 is displayed.  
deactivate: The T 557 is deactivated and the deactivation code is  
displayed.  
NOTE  
Only downloaded videos from DivX VOD can be played back on your  
T 557.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
uSing the t 557 - featureS  
USB MODE  
PLAYING AUDIO CD/MP3/wMA  
The T 557 can play back MP3/WMA/JPEG/PNG/DivX files stored in external  
USB (Universal Serial bus) devices. The following are the T 557’s capabilities  
with respect to USB device playability.  
Support USB Flash Drive and External HDD formatted in FAT16, FAT32 or  
NTFS.  
Support USB 1.1 and USB 2.0.  
Support up to 4 partitions of the USB device.  
Digital camera and mobile phone are not supported.  
If a USB extension cable or USB HUB is used, the USB device may not be  
recognized.  
NOTE  
External HDD formatted in NTFS is read only; thus, it cannot be used for  
The T 557 can play Audio CD and MP3/WMA formatted recordings on  
CD-R/RW, DVD R/RW,BD-R/RE discs or USB flash drive.  
downloading BD-Live contents.  
1
2
3
Load the applicable disc or connect USB containing files. SelectMusic”  
from theHomemenu.  
Press [ENTER]. TheMUSICmenu appears at the OSD. A list of folders,  
tracks or files is shown at the OSD.  
IMPORTANT NOTICE  
The USB port of the T 557 cannot be connected to a PC. T 557 cannot be  
used as a storage device.  
Use the BR 2’s [  
files.  
] keys to navigate through the folders, tracks or  
uSb plaYback  
4
5
6
Press ENTER to see the folder contents.  
Press [ ] to select a track or file.  
Press [ ] or [ENTER] to start playback.  
1
2
3
Connect the external USB device to the front panel’s USB input.  
Press [HOME]. SelectMovie, PhotoorMusicoption. Press [ENTER].  
If a disc is loaded and a USB device is inserted simultaneously, the menu  
prompt for selecting a media will appear  
NOTES  
Playback may start automatically if an Audio CD is loaded.  
If you are in a file list and want to return to the previous Folder list, use the  
] buttons on the remote to highlight the folder and press [ENTER].  
[
Use BR 2’s red (A), green (B), yellow (C) or blue (D) buttons as indicated in  
the OSD – go to the first file/page, move up or down the file/page list or  
jump to last file/page.  
During playback, press [RTN] once or twice to go back to the previous  
menu/page/OSD.  
IMPORTANT NOTICES  
Customers should note that permission is required in order to download  
MP3/WMA files and music from the Internet. NAD ELECTRONICS  
INTERNATIONAL has no right to grant such permission. Permission  
should always be sought from the copyright owner.  
Maximum files per disc/USB: less than 2000 (total number of files and  
folders).  
4
SelectUSBas the desired media and then press [ENTER].  
For details of operations on applicable file type, refer to the relevant  
sections below about MP3/WMA/Photo/DivX playback.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
uSing the t 557 - featureS  
VIEwING A PHOTO FILE  
NOTES  
If you are in a file list and want to return to the previous Folder list, use  
the [  
] buttons on the remote to highlight the folder and press  
[ENTER].  
Use BR 2’s red (A), green (B), yellow (C) or blue (D) buttons as indicated in  
the OSD – go to the first file/page, move up or down the file/page list or  
jump to last file/page.  
During playback, press [RTN] once or twice to go back to the previous  
menu/page/OSD.  
Recommended size: less than 4000 x 3000 x 24 bit/pixel or less than  
3000 x 3000 x 32 bit/pixel.  
Maximum files per disc/USB: less than 2000 (total number of files and  
folders).  
DIVX PLAYBACK  
The T 557 supports DivX playback.  
The T 557 allows the playback or viewing of PHOTO files.  
1
Load the applicable disc or connect USB containing files. SelectPhoto”  
from theHomemenu. Press [ENTER].  
The PHOTO menu appears on the TV screen. A thumbnail of the photos  
loaded in the disc will be shown in the OSD.  
1
2
3
Load the applicable disc or connect USB containing files. SelectMOVIE”  
from theHomemenu.  
2
Press [ENTER]. A list of DivX files is shown in the OSD. Use [  
to select a file.  
]
3
4
5
Press [  
] to go over the photo files.  
Press [ENTER] to select a file and start playback.  
Press [ENTER] or [ ] to select a file and start playback.  
During photo playback, several selectable options are shown in the  
NOTE  
bottom portion of the photo. Use [  
the following options.  
] to highlight and select any of  
Use BR 2’s red (A), green (B), yellow (C) or blue (D) buttons as indicated in  
the OSD – go to the first file/page, move up or down the file/page list or  
jump to last file/page.  
Slide Show: Press [ENTER] button to start or pause the slide show.  
movie file requirementS (uSb/diSc)  
music: Press [ENTER] to play or pause the background music. This option is  
movie le compatibility with the t 557 is limited as follows:  
available after the background music is selected usingMusic Selectoption.  
1
2
3
Available resolution size: 1920 x 1080 (W x H) pixels  
File extensions:.avi, “.divx, “.mpg, “.mpeg, “.mp4, “.mkv”  
Playable subtitle: SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.  
txt), MicroDVD (.sub/.txt), VobSub (.sub), SubViewer 1.0 (.sub), SubViewer  
2.0 (.sub/.txt), TMPlayer (.txt), DVD Subtitle System (.txt)  
Playable Codec format:DIVX3.xx, DIVX4.xx, DIVX5.xx, XVID, DIVX6.  
xx(Standard playback only), H.264/MPEG-4 AVC, DIVX-HD, MPEG1 SS,  
MPEG2 PS, MPEG2 TS  
music Select: Select the background music during photo playback. Press  
[ENTER] and theSelect the music albumsubmenu appears. Use [  
to select a media or folder containing music files. Press ENTER to confirm your  
selection and start playback of selected background music.  
]
4
rotate: Toggle [ENTER] to continually rotate the picture clockwise. This  
option is not available during slide show.  
5
6
7
8
Playable Audio format:Dolby Digital, DTS, MP3, WMA, “AAC,“AC3”  
Sampling frequency: within 32-48 kHz (WMA), within 16-48 kHz (MP3)  
Bit rate: within 20-320 kbps (WMA), within 32-320 kbps (MP3)  
CD-R/RW, DVD R/RW, BD-R/RE Format: ISO 9660+JOLIET, UDF and UDF  
Bridge format  
zoom: During playback or pause mode, press [ZOOM] to display the [Zoom]  
menu. Use BR 2’s green or yellow buttons to zoom in or out of the picture.  
You can move through the zoomed picture using [  
] buttons.  
Press RTN to exit the [Zoom] menu and return to the normal picture size. The  
zoom function can also be operated by BR 2’s [ZOOM] button.  
9
Maximum Files/Folder: Less than 2000  
The movie file name and subtitle are limited to 180 characters.  
Not all the WMA and AAC Audio format is compatible with this unit.  
HD movie files contained on the CD or USB 1.0/1.1 may not be  
played properly. BD, DVD or USB 2.0 are recommended to play back  
HD movie files.  
Setting: Use [  
] to selectEffectorDelay. Use [  
] and then  
press ENTER to set the selected option.  
effect: Apply various effects when sliding photos.  
Off: Slide Show without any effect.  
This player support H.264/MPEG-4 AVC profile Main, High at Level  
4.1.  
For a file with higher level, a warning message will appear on the  
screen.  
This player does not support files that are recorded with GMC  
(Global Motion Compensation) or Qpel (Quarter pixel). Video  
encoding techniques in MPEG4 standard, like DivX or XVID, are  
supported.  
Random: Slide show effects are applied randomly.  
Slide: Slides a photo from various directions.  
Door: Photo will be appear like door opening.  
Lattice: Photo will be appear from tiled pieces to full screen image  
delay: Set the photo delay time for Slide Show. Use BR 2’s [  
] to  
select Slow, Normal or Fast.  
hide: Toggle [ENTER] to exit or display the menu options.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
uSing the t 557 - featureS  
ADJUSTING THE PICTURE MODE  
The following filter settings can be adjusted even if the picture mode is in  
“Standardmode. These settings can be used to re-duce the noise level or  
set the black level of the video image on the screen.  
block nr (block noise reduction): Set this option toLow, Midor  
“Highto reduce the block noise produced in the MPEG compression  
process which may appear especially on fast-moving pictures. Select  
“Offto retain current settings.  
mosquito nr (mosquito noise reduction): Reduce mosquito  
(scattering) noise produced in the MPEG compression process by  
selectingLow, MidorHighoption. SelectOffto retain current  
settings.  
black level: Black level determines the amount of light a picture  
display emits for the darkest areas of an image. SelectOnto display  
deeper, richer black than inOffsetting. Black Level control is only valid  
in composite output.  
Select the video quality mode during playback. You can adjust various  
options such as Contrast, Brightness, Sharpness, etc.  
ENJOYING BD-LIVE™ OR BONUSVIEw™ IN BD-VIDEO  
The T 557 supports picture-in-picture (PIP), secondary audio, Virtual packages  
and other features for BD-Video supporting BONUSVIEW (BD-ROM version  
2 Profile 1 version 1.1/ Final Standard Profile). In addition to the BONUSVIEW  
function, BD-Video supporting BD-Live (BD-ROM version 2 Profile 2) allow more  
functions like online games by connecting the T 557 to the internet.  
1
2
Press BR 2’s [PICTURE] button while playing a BD, DVD or a movie file.  
The [Picture Mode] menu appears on the screen.  
Use [  
] to select betweenStandardandUser Settingoptions.  
Standard: Disable video color setting options.  
user Settings: Enable video color setting options.  
3
4
5
6
Use [  
option will remain shown in the OSD. Use [  
Use [ ] again to move on to the next video color option or press  
[ENTER] to display again all options.  
Press [RTN] or [PICTURE] to complete all settings and exit Picture Mode  
menu.  
] to select a desired option. Upon selection, only the selected  
] to adjust the value.  
enjoYing bd-live diScS  
The T 557 supports BD-Live, a new BD-Video function that allows access  
features like interactive functions when connected to the internet. The  
usable functions and the operating method may vary with each disc so  
make sure to refer to the disc’s instructions for proper access and playability.  
SelectDefaultto restore Picture Mode default settings. SelectCloseto  
accept all changes done and at the same time exit Picture Mode menu.  
The T 557 must be connected to the internet to use the BD-Live functions.  
It may take up to several minutes to load and start enjoying BD-Live  
contents. Additional contents like movie trailer, subtitles, BD-J and similar  
features can be downloaded to a USB device. Make sure that the free space  
in the USB device is more than 1GB.  
IMPORTANT NOTICE  
Ensure that a USB flash drive is connected to the front USB port when  
accessing BD-Live functions  
SCREENSAVER  
The screensaver appears when you leave the T 557 in Stop mode or HOME  
menu mode for about five minutes. If the Screen Saver is displayed for five  
minutes, the T 557 automatically turns itself off.  
LAST SCENE MEMORY  
The T 557 memorizes the last scene from the last disc that is viewed. The  
last scene remains in memory even if the disc is re-moved from the unit or  
the unit turned off. If you load a disc that has the scene memorized, the  
scene is automatically recalled.  
NOTES  
The T 557 does not memorize the scene of a disc if it is turned off before  
the disc is played back.  
Last Scene Memory function for a previous disc is erased once a different  
disc is played.  
This function may not work on some discs or titles.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
uSing the t 557 – function control  
Depending on the media, the following basic function controls of the T 557  
can be accessed directly using the BR 2 remote control.  
PICTURE  
AUDIO  
Press to go to PICTURE MODE menu wherein video color setting options  
can be enabled, adjusted, disabled or turned off. Refer also to the item  
about ADJUSTING THE PICTURE MODE under the USING THE T 557 –  
FEATURES segment of the main OPERATION heading.  
The AUDIO button will allow one to switch the audio language or format  
only if the media supports the AUDIO button feature.  
RPT (REPEAT)  
Press [AUDIO] repeatedly to select desired audio language or format.  
SUBTITLE  
Press [RPT] repeatedly to select desired repeat mode. The following are the  
repeat modes  
track: Repeated playback of current track or file.  
all: Repeated playback of all tracks, files and folders.  
(audio disc/file only): Tracks or files are played back in random  
order.  
It is possible to change the subtitle language to a different language from  
the one selected at the initial settings. This operation works only with discs  
on which multiple subtitle languages are recorded.  
1
Press [SUBTITLE] during playback. When no subtitles are recorded, “OFF”  
will be displayed.  
all: Repeated playback of all tracks, files and folders in random  
order.  
2
Press [SUBTITLE] repeatedly until the desired language is selected.  
chapter: Repeated playback movie chapter.  
title: Repeated playback of movie title.  
When the desired language is not selected even after pressing the button  
several times, it means that the language is not available on the disc.  
a-b (video disc/file, audio cd only): Repeat specific portion of a  
scene. Press [RPT] to select beginning of the portion- “A-. Press [ENTER]  
to select the end of the portion A-B. A scene portion less than 3  
seconds cannot be selected.  
To eliminate the On Screen Subtitles, press [SUBTITLE] repeatedly to select  
“OFF.  
off: Repeated press [RPT] untilOffto cancel all repeat modes.  
ZOOM  
NOTES  
For other disc type, the repeat mode may not be possible as above. The  
repeat mode of such discs maybe enabled from the disc’s menu itself or  
other built-in features.  
REPEAT feature does not apply to PHOTO files.  
Use [ZOOM] to enlarge the video image. Press [ZOOM] during playback or  
still playback to activate the Zoom function.  
Use the green and yellow buttons to select Zoom mode (up to 16 levels).  
Move through the zoomed picture using the [  
] buttons. To  
return to normal picture size, press the yellow (C) button repeatedly until  
the picture returns to its normal size (Zoom).  
NOTE  
Zoom may not work on some discs or titles.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
uSing the t 557 – function control  
MARKER, SEARCH, CLEAR  
Use the [MARKER] button to selectively mark a scene that you wish to  
playback.  
enter a marker  
Press [MARKER] at the desired point on the disc. The marker icon appears  
on the screen briefly. You can enter up to nine markers.  
recall or clear a marker Scene  
Press [SEARCH] and the search menu appears on the screen. Press a  
number button to select a marker number that you want to recall. Playback  
starts from the marked scene.  
Alternatively, press [ ] to highlight a marker number. Use [  
] to select  
a marked scene you want to recall or clear. Press [ENTER] and playback  
starts from the marked scene. Press [CLEAR] and the marked scene is erased  
from the search menu.  
NOTES  
This MARKER feature is applicable only to video discs/files.  
This function may not work on some discs or titles.  
All marked points are cleared if the title is in complete STOP mode, title is  
changed or the disc is unloaded.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REFERENCE  
reference tableS  
RESOLUTION SETTINGS  
PLAYBACK OF UNPROTECTED MEDIA  
VIDEO OUTPUT  
COMPONENT VIDEO OUT  
HDMI DISCONNECTED  
RESOLUTION  
HDMI OUT  
VIDEO OUT  
HDMI CONNECTED  
480i/576i  
480p/576p  
720p  
480i/576i  
480p/576p  
720p  
480p/576p  
480p/576p  
720p  
480i/576i  
480p/576p  
720p  
480i/576i  
480i/576i  
480i/576i  
480i/576i  
480i/576i  
480i/576i  
1080i  
1080i  
1080i  
1080i  
1080p/24Hz mode  
1080p/50Hz/60Hz  
1080p/24Hz mode  
1080p/50Hz/60Hz  
480i/576i  
480i/576i  
1080i  
1080i  
PLAYBACK OF COPY PROTECTED MEDIA  
VIDEO OUTPUT  
COMPONENT VIDEO OUT  
RESOLUTION  
HDMI OUT  
VIDEO OUT  
HDMI CONNECTED  
480i/576i  
HDMI DISCONNECTED  
480i/576i  
480i/576i  
480p/576p  
720p  
480p/576p  
480p/576p  
480i/576i  
480i/576i  
480i/576i  
480i/576i  
480i/576i  
480i/576i  
480p/576p  
480i/576i  
480p/576p  
720p  
480p/576p  
1080i  
1080i  
480i/576i  
480p/576p  
1080p/24Hz mode  
1080p/50Hz/60Hz  
1080p/24Hz mode  
1080p/50Hz/60Hz  
480i/576i  
480p/576p  
480i/576i  
480p/576p  
AUDIO OUTPUT SPECIFICATIONS  
AUDIO OUTPUT PORT  
SPDIF (DIGITAL AUDIO OUT)  
HDMI OUT  
AUDIO OUTPUT SETTING  
SOURCE  
ANALOG AUDIO OUT  
AUDIO OUTPUT SETTING  
PCM  
STEREO  
DTS RE-  
ENCODE  
PRIMARy  
PASS-THRU  
PCM  
STEREO  
PCM  
MULTI-CH  
DTS RE-  
ENCODE  
PRIMARy  
PASS-THRU  
Dolby Digital  
Dolby Digital Plus  
Dolby TrueHD  
DTS  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
DTS  
DTS  
DTS  
DTS  
DTS  
DTS  
DTS  
DTS  
Dolby Digital  
Dolby Digital  
Dolby Digital  
DTS  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 5.1ch  
PCM 7.1ch  
PCM 7.1ch  
PCM 5.1ch  
PCM 7.1ch  
PCM 2ch  
DTS  
DTS  
DTS  
DTS  
DTS  
DTS  
DTS  
DTS  
Dolby Digital  
Dolby Digital Plus  
Dolby TrueHD  
DTS  
DTS-HD  
DTS  
DTS-HD  
Linear PCM 2ch  
Linear PCM 5.1ch  
Linear PCM 7.1ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 2ch  
PCM 5.1ch  
PCM 7.1ch  
PCM 5.1ch  
PCM 7.1ch  
NOTES  
It is not possible to set up at the same time “PCM Multi-Ch” or “Primary Pass-Thru” setting for “HDMI” option and “DTS Re-Encode” setting for “SPDIF”  
option. If the “HDMI” option is set to “PCM Multi-Ch” or “Primary Pass-Thru, the “SPDIF” option is set automatically to “PCM Stereo. Conversely, if “SPDIF”  
option is set to “DTS Re-Encode, the “HDMI” option is set automatically to “PCM Stereo.  
If the T 557 plays back a disc of Dolby Digital Plus or Dolby TrueHD audio format and “HDMI” option set to “PCM Multi-Ch” and “SPDIF” option set to  
“Primary Pass-Thru, SPDIF output is limited to “PCM 2ch” only.  
If the T 557 plays back a disc of Dolby Digital Plus or Dolby TrueHD audio format, HDMI connection is 1.3 version and audio output is taken from HDMI OUT  
port with both HDMI and SPDIF connected simultaneously, SPDIF output is limited to “PCM 2ch” only.  
The audio output format for MP3/WMA playback is PCM 48kHz/16 bit and PCM 44.1kHz/16 bit for Audio CD.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REFERENCE  
language code liSt  
Use this list to input your desired language for the following settings: DISC AUDIO/DISC SUBTITLE/DISC MENU language.  
Language  
Abkhazian  
Afar  
code  
6566  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6588  
6590  
6665  
6985  
6678  
6890  
6672  
6682  
6671  
7789  
6669  
7577  
6765  
9072  
6779  
7282  
6783  
6865  
7876  
6978  
6979  
6984  
7079  
Language  
Fiji  
code  
7074  
7073  
7082  
7089  
7176  
7565  
6869  
6976  
7576  
7178  
7185  
7265  
7387  
7273  
7285  
7383  
7378  
7365  
7165  
7384  
7465  
7487  
7578  
7583  
7575  
7589  
7579  
7585  
7679  
7665  
7686  
Language  
Lingala  
code  
7678  
7684  
7775  
7771  
7783  
7776  
7784  
7773  
7782  
7779  
7778  
7865  
7869  
7879  
7982  
8065  
8083  
7065  
8076  
8084  
8185  
8277  
8279  
8285  
8377  
8365  
7168  
8382  
8372  
8378  
8368  
Language  
Singhalese  
Slovak  
code  
8373  
8375  
8376  
8379  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Finnish  
Lithuanian  
Macedonian  
Malagasy  
Malay  
Afrikaans  
Albanian  
Ameharic  
Arabic  
French  
Slovenian  
Somali  
Spanish  
Sudanese  
Swahili  
Swedish  
Tagalog  
Tajik  
Frisian  
Galician  
Georgian  
German  
Greek  
Malayalam  
Maltese  
Armenian  
Assamese  
Aymara  
Maori  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Marathi  
Azerbaijani  
Bashkir  
Moldavian  
Mongolian  
Nauru  
Tamil  
Basque  
Tatar  
Bengali; Bangla  
Bhutani  
Hebrew  
Hindi  
Nepali  
Telugu  
Thai  
Norwegian  
Oriya  
Bihari  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Irish  
Tibetan  
Tigrinya  
Tonga  
Breton  
Panjabi  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Pashto, Pushto  
Persian  
Turkish  
Turkmen  
Twi  
Polish  
Italian  
Portuguese  
Quechua  
Rhaeto-Romance  
Rumanian  
Russian  
Japanese  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Ukrainian  
Urdu  
Chinese  
Corsican  
Croatian  
Czech  
Uzbek  
Vietnamese  
Volapük  
Welsh  
Samoan  
Danish  
Kirghiz  
Sanskrit  
Dutch  
Korean  
Scots Gaelic  
Serbian  
Wolof  
English  
Kurdish  
Laothian  
Latin  
Xhosa  
Esperanto  
Estonian  
Faroese  
Serbo-Croatian  
Shona  
Yiddish  
Yoruba  
Zulu  
Latvian, Lettish  
Sindhi  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REFERENCE  
area code  
Enter the appropriate code number for setting up theArea Code.  
code country  
code country  
code country  
code country  
code country  
code country  
af  
al  
dz  
aS  
ad  
ao  
ai  
Afghanistan  
Albania  
td  
cl  
cn  
cx  
cc  
Chad  
de  
gh  
gi  
gb  
gr  
gl  
gd  
gp  
Germany  
Ghana  
lu  
Luxembourg  
pg  
Papua New  
Guinea  
Sj  
Svalbard and Jan  
Mayen  
Chile  
mo Macau  
mk  
Algeria  
China  
Gibraltar  
Macedonia  
pY  
pe  
ph  
pn  
pl  
pf  
Paraguay  
Sz  
Se  
ch  
SY  
tj  
tw  
tz  
th  
tg  
tk  
to  
tt  
Swaziland  
Sweden  
American Samoa  
Andorra  
Christmas Island  
Cocos (Keeling)  
Islands  
Great Britain  
Greece  
mg Madagascar  
mw Malawi  
mY  
mv  
ml  
mt  
mh Marshall Islands  
mq Martinique  
(French)  
Peru  
Philippines  
Pitcairn Island  
Poland  
Switzerland  
Syria  
Angola  
Greenland  
Grenada  
Malaysia  
Maldives  
Mali  
Anguilla  
co  
km  
cg  
ck  
cr  
hr  
cu  
cY  
cz  
dk  
dj  
Colombia  
Comoros  
Congo  
Tadjikistan  
Taiwan  
aq  
ag  
Antarctica  
Antigua and  
Barbuda  
Guadeloupe  
(French)  
Polynesia  
Malta  
(French)  
Tanzania  
Thailand  
Togo  
Cook Islands  
Costa Rica  
Croatia  
gu  
gt  
gn  
Guam (USA)  
Guatemala  
Guinea  
pt  
pr  
qa  
re  
ro  
ru  
Portugal  
ar  
Argentina  
Puerto Rico  
Qatar  
am Armenia  
aw Aruba  
Tokelau  
Cuba  
gw Guinea Bissau  
gY  
ht  
hm Heard and  
McDonald  
mr  
Mauritania  
Reunion (French)  
Romania  
Tonga  
au  
at  
az  
bS  
bh  
bd  
bb  
bY  
be  
bz  
bj  
Australia  
Cyprus  
Guyana  
Haiti  
mu Mauritius  
Yt  
mx  
fm  
md Moldavia  
mc Monaco  
mn Mongolia  
mS Montserrat  
ma Morocco  
Trinidad and  
Tobago  
Austria  
Czech Republic  
Denmark  
Djibouti  
Mayotte  
Mexico  
Russian  
Azerbaidjan  
Bahamas  
Bahrain  
Federation  
Rwanda  
tn  
tr  
tm  
tc  
Tunisia  
Micronesia  
rw  
gS  
Turkey  
dm Dominica  
do  
Islands  
S. Georgia & S.  
Sandwich Isls.  
Saint Helena  
Saint Kitts &  
Nevis Anguilla  
Saint Lucia  
Saint Pierre and  
Miquelon  
Saint Tome and  
Principe  
Turkmenistan  
Turks and Caicos  
Islands  
Bangladesh  
Barbados  
Belarus  
Dominican  
Republic  
East Timor  
Ecuador  
hn  
hk  
hu  
iS  
in  
id  
ir  
iq  
ie  
il  
Honduras  
Hong Kong  
Hungary  
Iceland  
India  
Sh  
kn  
tp  
ec  
eg  
Sv  
gq  
tv  
ug  
ua  
ae  
Tuvalu  
Belgium  
Uganda  
Belize  
Egypt  
mz  
Mozambique  
lc  
pm  
Ukraine  
Benin  
El Salvador  
Equatorial  
Guinea  
Indonesia  
Iran  
mm Myanmar  
United Arab  
Emirates  
United States  
Uruguay  
bm  
bt  
bo  
ba  
Bermuda  
Bhutan  
na  
nr  
np  
nl  
an  
Namibia  
Iraq  
Nauru  
St  
uS  
uY  
Bolivia  
er  
ee  
et  
fk  
fo  
fj  
Eritrea  
Ireland  
Israel  
Nepal  
Bosnia-  
Estonia  
Netherlands  
Netherlands  
Antilles  
vc  
Saint Vincent &  
Grenadines  
Samoa  
um USA Minor  
Outlying Islands  
Uzbekistan  
Herzegovina  
Botswana  
Bouvet Island  
Brazil  
Ethiopia  
it  
ci  
Italy  
bw  
bv  
br  
io  
Falkland Islands  
Faroe Islands  
Fiji  
Ivory Coast  
Jamaica  
Japan  
wS  
Sm  
Sa  
Sn  
Sc  
Sl  
Sg  
Sk  
Si  
Sb  
So  
za  
kr  
eS  
lk  
Sd  
Sr  
uz  
vu  
va  
ve  
vn  
vg  
jm  
jp  
jo  
kz  
ke  
ki  
nc  
New Caledonia  
(French)  
San Marino  
Saudi Arabia  
Senegal  
Vanuatu  
Vatican City State  
Venezuela  
Vietnam  
British Indian  
Ocean Territory  
Brunei  
fi  
cS  
Finland  
Jordan  
Kazakhstan  
Kenya  
nz  
ni  
New Zealand  
Nicaragua  
Niger  
Former  
Seychelles  
Sierra Leone  
Singapore  
Slovak Republic  
Slovenia  
bn  
Czechoslovakia  
Former USSR  
France  
ne  
ng  
nu  
nf  
kp  
mp  
Virgin Islands  
(British)  
Darussalam  
Bulgaria  
Su  
fr  
fx  
Kiribati  
Nigeria  
bg  
bf  
bi  
kh  
cm  
ca  
cv  
kY  
cf  
kw Kuwait  
Niue  
vi  
wf  
Virgin Islands (USA)  
Wallis and  
Futuna Islands  
Western Sahara  
Yemen  
Burkina Faso  
Burundi  
France  
kg  
la  
lv  
lb  
lS  
lr  
lY  
li  
Kyrgyzstan  
Norfolk Island  
North Korea  
Northern  
Mariana Islands  
Norway  
(European  
Territory)  
French Guyana  
French Southern  
Territories  
Gabon  
Laos  
Solomon Islands  
Somalia  
Cambodia6  
Cameroon  
Canada  
Latvia Islands  
Lebanon  
Lesotho  
Liberia  
eh  
Ye  
Yu  
zr  
zm  
zw  
gf  
tf  
South Africa  
South Korea  
Spain  
no  
om Oman  
pk  
pw  
pa  
Yugoslavia  
Zaire  
Cape Verde  
Cayman Islands  
Central African  
Republic  
ga  
Libya  
Pakistan  
Palau  
Sri Lanka  
Zambia  
gm Gambia  
ge Georgia  
Liechtenstein  
Lithuania  
Sudan  
Zimbabwe  
lt  
Panama  
Suriname  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REFERENCE  
troubleShooting  
condition  
poSSible cauSeS  
poSSible SolutionS  
No power.  
• The power cord is disconnected.  
• Plug the power cord into the wall outlet  
securely.  
The power is on, but the T 557 does not  
work.  
• No disc is inserted.  
• Insert a disc.  
No picture.  
No sound.  
• The TV is not set to receive video input signal  
from the T 557  
• Select the appropriate video input mode on  
the TV.  
• The video cable is not connected securely.  
• Connect the video cable securely.  
• Check TV capability.  
• Mismatched resolution setting between the  
T 557 and the TV.  
• Set the Resolution according to your TV’s  
capability.  
• The connected equipment is not capable of  
detecting or decoding audio signal from the  
T 557.  
• Connect the audio output of the T 557 to an  
equipment with appropriate audio decoders.  
• The power of the equipment connected with  
the audio cable is turned off.  
• Turn on the equipment connected with the  
audio cable.  
• The AUDIO output settings are incorrect.  
• An unplayable disc is inserted.  
• The rating level is set.  
• Check audio output settings as configured in  
the Audio Setup menu.  
The T 557 does not start playback.  
• Insert a playable disc. (Check the disc type  
and regional code.)  
• Cancel the rating function or change the  
rating level.  
BD-Live feature does not work.  
• Internet connection is not established.  
• Ensure that the T 557 is connected to the  
local area network and can access the  
internet.  
• External USB is not connected.  
• Connect USB device to the front panel USB  
port.  
The remote control does not work  
properly.  
• T 557 front panel is in very bright sunlight or  
ambient light.  
• Reduce sunlight/room lighting.  
• IR transmitter window on remote or IR receiver  
window is obstructed.  
• Check IR windows and ensure clear line-of-  
sight from remote to T 557.  
• The remote control batteries are dead.  
• Replace the remote control batteries.  
noteS on diScS  
HANDLING DISCS  
Do not touch the playback side of the disc. Hold the disc by the edges so that  
fingerprints do not get on the surface. Never stick paper or tape on the disc.  
CLEANING DISCS  
Fingerprints and dust on the disc can cause poor picture quality and sound  
distortion. Before playing, clean the disc with a clean cloth. Wipe the disc  
from the center out.  
STORING DISCS  
After playing, store the disc in its case. Do not expose the disc to direct  
sunlight or sources of heat and never leave it in a parked car exposed to  
direct sunlight.  
Do not use strong solvents such as alcohol, benzine, thinner, commercially  
available cleaners, or anti-static spray intended for older vinyl records.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REFERENCE  
SpecificationS  
SYSTEM  
Signal system  
Auto/NTSC/PAL (European version model only)  
NTSC (North America version model only)  
Semiconductor laser  
2dB (Ref. 0dB 20 Hz – 20 kHz)  
>100dB (A-WTD, analog OUT)  
>95 dB  
Laser  
Frequency response  
Signal-to-noise ratio  
Dynamic range  
Total Harmonic Distortion  
LAN port  
<0.008 %  
Ethernet jack, 10 Base-T/100 Base-TX  
OUTPUT  
Output format  
Video OUT: up to 480i/576i  
Component video OUT: up to 1080i  
HDMI OUT: up to 1080p  
1Vp-p/75 ohms  
Video out  
Component (Y signal)  
Component (Pb/Pr signal)  
Audio output level  
1Vp-p/75 ohms  
0.7Vp-p/75 ohms  
2.0 Vrms (Ref. 1 kHz, 0 dB)  
1.3b  
HDMI version  
Digital out (coaxial)  
Digital out (optical)  
0.5Vp-p  
3Vp-p  
GENERAL  
Power requirements  
Standby power  
AC 110V - 240V 50/60 Hz  
<0.7W  
Unit Dimension (W x H x D)  
435 x 60 x 280 mm (Gross)*  
* - Gross dimensions include feet, extended buttons and rear panel terminals.  
information about T 557.  
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535 & other U.S. and worldwide patents issued &  
pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Advanced Digital Out are trademarks of DTS, Inc. © 1996-2008 DTS,  
Inc. All Rights Reserved.  
Manufactured under License from Dolby Laboratories. “Dolbyand the double-D symbol are trademarks of Dolby Laboratories.  
DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license.  
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.  
“Blu-ray Discis a trademark.  
“BD-LIVElogo is a trademark of Blu-ray Disc Association.  
Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries.  
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights  
owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation,  
and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly  
is prohibited.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
www NADelectronics com  
©2009 nad electronicS international  
a diviSion of lenbrook induStrieS limited  
All rights reserved. NAD and the NAD logo are trademarks of NAD Electronics International, a division of Lenbrook Industries Limited.  
No part of this publication may be reproduced, stored or transmitted in any form without the written permission of NAD Electronics International.  
T 557 Manual Issue 1.5-08/09  
Download from Www.Somanuals.com. All Manuals Search And Download.  

MTD Log Splitter 241 622 000 User Manual
Multiquip Portable Generator DCA125USI User Manual
National Instruments Network Card 370551A 01 User Manual
NEC Network Router P N 0893416 User Manual
NordicTrack Home Gym NTTL11993 User Manual
Nortel Networks Telephone 3904 User Manual
Oki Printer 2426 User Manual
Palm PDAs Smartphones Zire 72 User Manual
Panasonic Power Supply M9RZ90GB4LG User Manual
Parkside Power Screwdriver X3 User Manual