POWER AMPLIFIER
INSTRUCTIONS FOR USE
Thank you for purchasing the Musical Fidelity
X-AS100 Power Amplifier. Used properly and
carefully, it should give you many years of outstanding
musical reproduction.
Aesthetically and electronically the X-AS100 matches
perfectly with the X-P100 Preamplifier, X-RAY CD player
and X-PLORA tuner. Together, they form one of the
finest hi-fi systems available.
The X-AS100 has been designed to be switched on
continuously. The PSU should be positioned as far
away from the X-AS100 as possible. We suggest that the
PSU is placed on the floor near the mains outlet.
Dust regularly with a soft duster or soft brush but be
careful when using cleaning or polishing agents - they may
harm the surface finish.
If you have any questions about anything in your
audio system, please consult your dealer who is there
to help and advise you.
Instructions For Use. Page 1
X-AS100
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS AND FACILITIES
1
2
FRONT VIEW
BACK VIEW
1
2
Left channel power indicator
Right channel power indicator
3
4
5
6
Right channel input
Right channel loop output
Mono / Stereo button
Left channel input
7
8
9
Left channel loop output
Right loudspeaker output
Right PSU input
10
11
Left PSU input
Left loudspeaker output
3
4
5
6
7
8
9
10
11
Instructions For Use. Page 3
X-AS100
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
INSTALLATION PRECAUTIONS
Your new X-AS100 is designed and built to provide trouble-free performance but as
with all electronic devices it is necessary to observe a few precautions. Please ensure
that you have complied with them before you connect any AC power to your ampli-
fier. Retain this guide for future reference.
þ
Heed all warnings on the back of
ý
ý
Do not use near water.
the unit.
Do not place the amplifier near
þ
Place your X-AS100 where there
direct heat sources such as radiators
or other equipment that produces
heat.
is adequate ventilation.
þ
Only connect the unit to a power
supply of the type marked on the back
of the unit.
ý
Do not remove any covers or try
to gain access to the inside. The war-
ranty will be invalid if the unit has
been tampered with. There are no
user adjustments within. Refer all
service work to an authorised Musical
Fidelity agent.
þ
Position the power supply lead
and signal interconnect leads where
they are not likely to be walked on or
trapped by items placed on them.
ý
There are fuses in the X-AS100.
In the unlikely event that one blows,
take your X-AS100 to your audio
dealer. Do NOT try to replace the fuse
yourself or you will invalidate the
warranty.
BEFORE YOU SWITCH ON
You should make all connections to the X-AS100 before switching on.
Follow this routine before you listen for the first time, and each time you change any
connections.
1
Check all the inputs and outputs to the X-AS100.
Then check again.
Turn the volume control to nil.
Now you can switch on the power and carefully advance the volume to
the level you want and enjoy the music.
2
3
4
Instructions For Use. Page 4
X-AS100
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
LOUDSPEAKERS
To get a realistic soundstage and full dynamic range from your X-AS100, use it with
loudspeakers of a reasonable efficiency. An average rating for a loudspeaker these days is
about 88dB. This should mean that for an input of 1 watt, measured at 1 metre distance,
the sound pressure output will be 88dB. This is the minimum efficiency that we recommend
you should use. However, in our opinion, even this is not enough to allow for an adequate
dynamic range. For proper realistic dynamic range we recommend a loudspeaker efficiency
of about 94-95dB such as the Kelly Transducers range. These are an ideal match for the
X-AS100 and are highly recommended.
CONNECTIONS
All connections should be made with the power OFF before the mains lead is
plugged in and the unit switched on.
The X-AS100 is a stereo amplifier which can if required be mono'd for use in passive
bi-amping systems.
The X-AS100 can be used with a preamplifier or any line level source which has a
volume control. We highly recommend the matching X-P100 or Nu-Vista Preamps avail-
able from Musical Fidelity as an excellent choice.
How to connect your X-AS100 for Normal Stereo use
Connect the Left and Right outputs from your pre-amp or other line level source to
the phono inputs on the back panel marked as Left and Right Line Inputs. For the best
results we recommend that you use Musical Fidelity X-LINX "no-nonsense" interconnect
cables for this connection.
Connect your loudspeakers to the loudspeaker terminals situated on the back panel
marked as Left and Right Loudspeaker Outputs. Please refer to diagram below.
Once these connections are made, plug in the IEC type mains lead and switch on the
unit.
To Preamp
Left output
To Preamp
Right output
Left Speaker
Right Speaker
Instructions For Use. Page 5
X-AS100
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
PASSIVE BI-AMPING
The X-AS100 has both 'Loop Out' connections and a Mono/Stereo button to allow
flexible use in various Bi-amping combinations. In these combinations the X-AS100 is used
in conjunction with either another X-AS100 or compatible amplifiers with a gain of 33
such as the X-A50 or X-A200 monoblocs from Musical Fidelity. A pair of bi-wireable
speakers is required (and the bi-wire links must be removed) so that one amplifer channel
can drive the treble unit (tweeter) and another channel can drive the bass unit (woofer).
Please refer to the two examples below.
Example 1. Two X-AS100s
In this example, one X-AS100 is used to drive the left speaker whilst a second
X-AS100 drives the right speaker.
The Right output of your preamp is connected to the first X-AS100 to either the Left
or Right Line Input (it does not matter which). The Mono/Stereo Button is then
pressed in for Mono operation. The Right Louspeaker output is now wired to the Bass
unit terminals of the first speaker with a normal speaker wire pair. The Left Loudspeaker
output is now wired to the Treble unit terminals of the first speaker, again, using a normal
pair of speaker wires. This process is now repeated for the other X-AS100. Again the
Mono/Stereo button must be pressed in for mono operation. The Left output of the
preamp is connected to either of the Line level inputs of the second X-AS100. Then as
before one channel of the X-AS100 drives the bass unit of the second speaker and the
other channel drives the treble unit. See diagram below:
To Preamp
Right line output
Right Speaker
Mono buttons 'IN'
for mono operation.
To Preamp
Left line output
Speaker Bi-Wire
links removed.
Left Speaker
Instructions For Use. Page 6
X-AS100
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Example 2. One X-AS100 with a pair of X-A50s or X-A200s
In our second example, a pair of X-A200s are used to drive the bass unit (woofer) of
each channel whilst an X-AS100 is used to drive the treble unit (tweeter) of each channel.
The X-AS100 is connected to a preamp in the normal way with a pair of phono leads. Then
the line input of each X-A200 (or X-A50) is connected to a 'Loop Out' of the X-AS100 with
another set of phono leads. The X-AS100's Mono/Stereo button must be out for stereo
operation. The X-A200s in this example drive the left and right bass units whilst the
X-AS100 drives the left and right tweeter.
To Preamp
Left line output
To Preamp
Right line output
Mono/Stereo button 'out'
for Stereo operation
Left Speaker
Right Speaker
If you have any questions regarding passive bi-amping please contact your authorised
Musical Fidelity dealer who should be able to help and advise you.
EXTERNAL POWER SUPPLY
We recommend that the Power Supply Unit be positioned on the floor as far away
from the X-AS100 as possible. This ensures that there is no magnetic interaction between
the X-AS100 and the power supply unit thus giving best performance.
The X-AS100 has been designed so that it may be left switched on indefinately if
desired.
WARNING - Heat
When in use the X-AS100 gives off heat from its casework.
Never put anything on top of your X-AS100.
Always ensure that the unit has adequate ventilation.
Instructions For Use. Page 7
X-AS100
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Basic troubleshooting of an amplifier is similar to troubleshooting of any other
electrical or electronic equipment. Always check the most obvious possible causes
first. To give you a few ideas of what to look for, check the following:
Problem
Probable Cause
Remedy
No power when POWER Mains plug not inserted
Plug in securely
is pressed
correctly
PSU unit not connected
to main unit
Plug PSU umbilical lead
into back of main
X-AS100 unit
No sound
Volume control is set
to minimum on Preamplifier
Turn up the volume
Mute is selected on
Preamplifier
Press mute button on
remote control
Preamplifier not connected
to Power amplifier
Check phono cable
connection between units
Speakers are not connected,
or are connected incorrectly
Check speaker cables
Sound is not precise,
lacking in bass and
stereo image
Speakers are connected
out of phase
Make sure that both
speakers are connected
correctly
If none of these actions effect a cure, please contact your dealer, or an authorised Musical
Fidelity service agent. Remember, never open the case of the X-AS100 yourself, as this will
invalidate the guarantee.
Instructions For Use. Page 8
X-AS100
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
X-AS100 POWER AMPLIFIER
Power output
THD
100 watts per channel, 8W
< 0.005% at 1kHz
< 0.04% 20Hz - 20kHz unweighted
< 0.003% 20Hz - 20kHz 'A' weighted
10Hz - 70kHz +1dB
Frequency response
Input sensitivity
S/N ratio
900mV
> 106dB unweighted (ref 100W)
> 117dB ‘A’ weighted (ref 100W)
> 86dB unweighted (ref 1W)
> 97dB 'A' weighted (ref 1W)
> 90dB 20Hz-20kHz
Channel separation
Power consumption
Dimensions
450 watts (maximum)
230 x 110 x 330mm (W x H x D)
Width and height include feet,
depth include terminals
Standard accessories
X-AS100 power supply unit
IEC type mains lead
Musical Fidelity reserves the right to make improvements which may result in specification or
feature changes without notice.
Instructions For Use. Page 9
X-AS100
X-AS100-98-1
Download from Www.Somanuals.com. All Manuals Search And Download.
|