PARTS AND OPERATION MANUAL
OPERATION AND PARTS MANUAL
SERIES
MODEL MT75HS
TAMPING RAMMER
(ROBIN EC12HS GASOLINE ENGINE)
Revision #11 (01/12/12)
To find the latest revision of this
publication, visit our website at:
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12) — PAGE 3
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
MT75HS Tamping
ROBIN EC-12HS ENGINE
Crankcase and Cylinder Assembly ................32-33
Crankshaft and Piston Assembly ...................34-35
Governor Assembly .......................................36-37
Muffler and Air CleanerAssembly ..................38-39
Carburetor and Oil Pump Assembly ..............40-41
Recoil Starter and Blower Assembly .............42-43
Magneto Assembly ..................................... 44-45
Loose Parts Assembly ...................................46-47
Rammer
Proposition 65 Warning ......................................... 2
Table Of Contents ................................................. 4
Parts Ordering Procedures ................................... 5
Safety Information..............................................6-9
General Information ............................................ 10
Specifications ...................................................... 11
Controls and Components .................................. 12
Operation .......................................................13-15
Maintenance ..................................................16-17
Troubleshooting Guide ...................................18-19
Explanation Of Codes In Remarks Column ........ 20
Suggested Spare Parts ....................................... 21
Terms and Condition of Sale — Parts ..................... 48
Component Drawings
Name Plate and Decals .................................22-23
Crankcase and Engine Assembly ..................24-25
Cylinder Guide and Foot Assembly ...............26-27
Tank and Handle Assembly ...........................28-31
NOTICE
Specification and part number are subject to
change without notice.
PAGE 4 — MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS ORDERING PROCEDURES
Ordering parts has never been easier!
Choose from three easy options:
Effective:
January 1st, 2006
Best Deal!
Order via Internet (Dealers Only):
Order parts on-line using Multiquip’s SmartEquip website!
If you have an MQ Account, to obtain a Username
and Password, E-mail us at: parts@multiquip.
com.
■ View Parts Diagrams
■ Order Parts
■ Print Specification Information
To obtain an MQ Account, contact your
District Sales Manager for more information.
Use the internet and qualify for a 5% Discount
on Standard orders for all orders which include
complete part numbers.*
to log in and save!
Order Parts
Note: Discounts Are Subject To Change
Fax your order in and qualify for a 2% Discount
on Standard orders for all orders which include
complete part numbers.*
Order via Fax (Dealers Only):
All customers are welcome to order parts via Fax.
Domestic (US) Customers dial:
1-800-6-PARTS-7 (800-672-7877)
Note: Discounts Are Subject To Change
Domestic (US) Dealers Call:
Order via Phone:
1-800-427-1244
Non-Dealer Customers:
International Customers should contact
their local Multiquip Representatives for
Parts Ordering information.
Contact your local Multiquip Dealer for
parts or call 800-427-1244 for help in
locating a dealer near you.
When ordering parts, please supply:
❒
Dealer Account Number
❒
Specify Preferred Method of Shipment:
❒
❒
❒
❒
❒
Dealer Name and Address
✓ UPS/Fed Ex
✓ DHL
✓ Truck
■
■
Priority One
Ground
Shipping Address (if different than billing address)
Return Fax Number
■ Next Day
Second/Third Day
Applicable Model Number
■
Quantity, Part Number and Description of Each Part
NOTICE
All orders are treated as Standard Orders and will
ship the same day if received prior to 3PM PST.
WE ACCEPT ALL MAJOR CREDIT CARDS!
MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12) — PAGE 5
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
Do not operate or service the equipment before reading
the entire manual. Safety precautions should be followed
at all times when operating this equipment.
Failure to read and understand the safety
messages and operating instructions could
result in injury to yourself and others.
Potential hazards associated with the operation of this
equipment will be referenced with hazard symbols which
may appear throughout this manual in conjunction with
safety messages.
SAFETY MESSAGES
The four safety messages shown below will inform you
about potential hazards that could injure you or others.The
safety messages specifically address the level of exposure
to the operator and are preceded by one of four words:
DANGER,WARNING, CAUTION or NOTICE.
SAFETY SYMBOLS
DANGER
Indicates a hazardous situation which, if not avoided,
WILL result in DEATH or SERIOUS INJURY.
WARNING
Indicates a hazardous situation which, if not avoided,
COULD result in DEATH or SERIOUS INJURY.
CAUTION
Indicates a hazardous situation which, if not avoided,
COULD result in MINOR or MODERATE INJURY.
NOTICE
Addresses practices not related to personal injury.
PAGE 6 — MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
„ ALWAYS know the location of the nearest phone or keep a
phone on the job site. Also, know the phone numbers of
the nearest ambulance, doctor and fire department. This
information will be invaluable in the case of an emergency.
GENERAL SAFETY
CAUTION
„ NEVER operate this equipment without proper protective
clothing, shatterproof glasses, respiratory protection,
hearing protection, steel-toed boots and other protective
devices required by the job or city and state regulations.
RAMMER SAFETY
DANGER
„ NEVER operate the equipment in an explosive
atmosphere or near combustible materials.An
explosion or fire could result causing severe
bodily harm or even death.
„ NEVER operate this equipment when not
feeling well due to fatigue, illness or when
under medication.
„ NEVER operate this equipment under the influence of
drugs or alcohol.
WARNING
„ NEVER disconnect any emergency or safety devices.
These devices are intended for operator safety.
Disconnection of these devices can cause severe injury,
bodily harm or even death.Disconnection of any of these
devices will void all warranties.
„ ALWAYS check the equipment for loosened threads or
bolts before starting.
„ DO NOT use this machine on ground that is harder than
the machine can handle, or for driving pilings or tamping
rock beds. Furthermore, use of the machine on sloping
ground, such as the side of an embankment, may make
the machine unstable and can cause an accident. It can
also result in premature machine wear due to uneven
loads on the machine.
„ DO NOT use the equipment for any purpose other than
its intended purposes or applications.
NOTICE
„ This equipment should only be operated by trained and
qualified personnel 18 years of age and older.
„ Whenever necessary, replace nameplate, operation and
safety decals when they become difficult read.
Use the machine with confidence for tamping earth and
sand, soil, gravel, and asphalt.DO NOT use the machine
for other types of jobs.
„ Manufacturer does not assume responsibility for any
accident due to equipment modifications. Unauthorized
equipment modification will void all warranties.
CAUTION
„ NEVER lubricate components or attempt service on a
running machine.
„ NEVER use accessories or attachments that are not
recommended by Multiquip for this equipment. Damage
to the equipment and/or injury to user may result.
NOTICE
„ ALWAYS keep the machine in proper running condition.
„ ALWAYS know the location of the nearest
fire extinguisher.
„ Fix damage to machine and replace any broken parts
immediately.
„ ALWAYS know the location of the nearest
first aid kit.
„ ALWAYS store equipment properly when it is not being
used.Equipment should be stored in a clean, dry location
out of the reach of children and unauthorized personnel.
MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12) — PAGE 7
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
ENGINE SAFETY
DANGER
FUEL SAFETY
DANGER
„ The engine fuel exhaust gases contain poisonous carbon
monoxide. This gas is colorless and odorless, and can
cause death if inhaled.
„ DO NOT add fuel to equipment if it is placed inside truck
bed with plastic liner. Possibility exists of explosion or
fire due to static electricity.
„ The engine of this equipment
requires an adequate free flow
of cooling air.NEVER operate
this equipment in any enclosed
or narrow area where free flow
of the air is restricted.If the air
flow is restricted it will cause
injury to people and property
and serious damage to the
equipment or engine.
WARNING
„ DO NOT place hands or fingers inside engine
compartment when engine is running.
„ NEVER operate the engine with heat shields or
guards removed.
„ DO NOT start the engine near spilled fuel or combustible
fluids. Fuel is extremely flammable and its vapors can
cause an explosion if ignited.
„ DO NOT remove the engine oil drain plug
while the engine is hot. Hot oil will gush
out of the oil tank and severely scald any
persons in the general area of the rammer.
„ ALWAYS refuel in a well-ventilated area, away from
sparks and open flames.
„ ALWAYS use extreme caution when working with
flammable liquids.
CAUTION
„ NEVER touch the hot exhaust manifold,
muffler or cylinder.Allow these parts to cool
before servicing equipment.
„ DO NOT fill the fuel tank while the engine is running
or hot.
„ DO NOT overfill tank, since spilled fuel could ignite if it
comes into contact with hot engine parts or sparks from
the ignition system.
NOTICE
„ NEVER run engine without an air filter or with a dirty air
filter.Severe engine damage may occur.Service air filter
frequently to prevent engine malfunction.
„ Store fuel in appropriate containers, in well-ventilated
areas and away from sparks and flames.
„ NEVER tamper with the factory settings
of the engine or engine governor. Damage
to the engine or equipment can result
if operating in speed ranges above the
maximum allowable.
„ NEVER use fuel as a cleaning agent.
„ DO NOT smoke around or near the
equipment. Fire or explosion could result
from fuel vapors or if fuel is spilled on a
hot engine.
PAGE 8 — MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
TRANSPORTING SAFETY
CAUTION
„ NEVER allow any person or animal to stand underneath
the equipment while lifting.
NOTICE
„ Before lifting, make sure that the equipment parts (hook
and vibration insulator) are not damaged and screws are
not loose or missing.
„ Always make sure crane or lifting device has been
properly secured to the lifting bail (hook) of the
equipment.
„ ALWAYS shutdown engine before transporting.
„ NEVER lift the equipment while the engine is running.
„ Tighten fuel tank cap securely and close fuel cock to
prevent fuel from spilling.
„ Use adequate lifting cable (wire or rope) of sufficient
strength.
„ Use one point suspension hook and lift straight
upwards.
„ DO NOT lift machine to unnecessary heights.
„ ALWAYS tie down equipment during transport by
securing the equipment with rope.
„ Never allow any person or animal to stand underneath the
equipment while lifting.
ENVIRONMENTAL SAFETY
NOTICE
„ Dispose of hazardous waste properly.
Examples of potentially hazardous waste
are used motor oil, fuel and fuel filters.
„ DO NOT use food or plastic containers to dispose of
hazardous waste.
„ DO NOT pour waste, oil or fuel directly onto the ground,
down a drain or into any water source.
MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12) — PAGE 9
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL INFORMATION
Definition of Tamping Rammer
The Mikasa MT-75HS Tamping Rammer is a powerful
compacting tool capable of applying a tremendous force in
consecutive impacts to a soil surface. Its applications include
soil compacting for backfilling for gas pipelines, water pipelines
and cable installation work.
The impact force of the MT-75HS levels and uniformly compacts
voids between soil particles to increase dry density.
Circular motion is converted to create impact force. The MT-
75HS tamping rammer develops a powerful compacting force at
the foot of the rammer.To maintain optimum performance, proper
operation and service are essential.
Construction of Tamping Rammer
The Mikasa MT-75HS is equipped with an Robin air cooled, oil-
injected two cycle gasoline engine. Transmission of the power
takes place by increasing the engine speed to engage the
centrifugal clutch.
Rammer Gearbox and Spring Cylinder
The Mikasa MT-75HS uses an oil bath lubrication system.Always
check the oil level through the oil level sight glass at the rear of
the tamper foot.
Controls
Before starting the MT-75HS Tamping Rammer identify and
understand the function of the controls, see Figure 1 on page11.
PAGE 10 — MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Table1. MT-75HS Rammer Specifications
MODEL
Overall Height
Overall Width
Over Length
Shoe Size
MT-75HS U.S. (metric)
38.9 in. (990 mm)
16.1 in. (410 mm)
29.9 in. (760 mm)
11.2 X 13.4 in. (285 X 340 mm)
690
Blows/minute
Impact Force
Clutch
3200 lbs./blow (1,451 kg/blow)
Automatic Centrifugal Clutch
152 lbs. (69 kg)
Operating Weight
Table 2. ROBIN EC-12HS Engine Specifications
MODEL
Type
ROBIN EC-12HS ENGINE
Air-Cooled 2 Stroke Gasoline Engine
6.96 cu.in. (114 cc)
Piston Displacement
Max. Output
4.3 hp/5,000 rpm
Max. Governed Speed, No Load
Cooling System
Lubrication System
Fuel
3,850 rpm
Air-Cooled By Fan
Fuel-Lubrication Oil Spraying System
Gasoline and 2-Stroke oil
Recoil Starter
Starting System
NOTE
Specifications are general and are subject to change without notice. If exact
measurements are required, equipment should be weighed and measured.
MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12) — PAGE 11
Download from Www.Somanuals.com. All Manuals Search And Download.
COMPONENTS
Figure 1. MT-75HS Rammer
Figure 1 shows the location of the controls and components
for the MT-75HS Tamping Rammer. The functions of each
control is described below:
8. Foot– Laminated wood with tempered steel plate for
superior shock absorption.
9. Oil Level Sight Glass – Indicates the level of oil in the oil
1. ThrottleLever– Controlsenginespeedandthetamping
bath reservoir.
action of the rammer.
10. RecoilStartingHandle–Usedwhenstartingtheengine.
Pull starter handle sharply and quickly, then return
starter handle to starter case before releasing.
2. EngineStopSwitch–Controlsthestartingandstopping
of the engine. Switch must be in the "ON" position when
starting the engine.
11. Fuel Tank/Cap – Poly fuel tank to avoid rust and
3. ChokeLever– Usedwhenstartingtheengine.Normally
used in cold weather conditions. In cold weather turn the
choke lever to the fully closed position, in warm weather
set choke lever half way or completely open.
corrosion, remove this cap to add gasoline.
12. Engine Air Cleaner – Prevents dirt (second stage) and
other debris from entering the engine.
13. Bellows – Reservoir for oil bath.
4. Fuel Shut-OffValve – Supplies fuel from the fuel tank to
theengine.Tobeginfuelflowmovethefuelshut-offvalve
downward.
14. Handle – To operate rammer GRIP handle assembly
firmly on both sides.
15. Muffler– Used to reduce noise and emissions.
5. Oil Bath Fill Plug – Open this plug to add oil to the oil
bath reservoir.
16. Spark Plug – Provides spark to the ignition system,
replace with engine manufactures recommended type
6. Drain Valve – Open this valve to remove oil from the
L1. A Returned Material Authorization must be approved by Multiquip prior to shipment. A copy of the Authorization must
spark plug.
be
a
ll
c
o
c
w
o
s
mpany the shipment to the designatedWarehouse.A copy of the original Multiquip invoice to the customer must
.
also accompany the shipment.
17. NamePlate– Displaysinformationregardingtherammer.
7. Pre- Cleaner – Pre-cleans (first stage) dirt and other
debris from entering the engine.
18. Roller Bar – Used when transporting rammer onto a
truck bed. Place rammer on this roller bar then slide.
8. Foot– Laminated wood with tempered steel plate for
superior shock absorption.
19. Oil Tank – Fill oil tank with 2-stroke motor oil.
PAGE 12 — MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
This section is intended to assist the operator with the initial
start-up of the MT-75HSTamping Rammer.It extremely important
that this section be read carefully before attempting to operate
the rammer.
Engine
1. Fill the fuel tank (Figure 3 ) with unleaded gasoline. At the
same time, check the engine oil level at the sight gauge
locatedontheoperator'ssideoftheoiltank. Filltheoiltank
tothe"H"levelusingonlyoutboard(2-stroke)oil. Replenish
theoilregularlybeforetheoillevelreachesthe"L"levelofthe
oil tank.
DO NOT use your rammer until this section is thoroughly
understood.
CAUTION:
CAUTION:
Failure to understand the operation of the MT-
75HSTamping Rammer could result in severe
damage to the trowel or personal injury.
The oil hose is not to be depressed or
damaged. A sensor detects lack of oil and
shuts down the engine automatically.
Rammer Gearbox and Spring Cylinder Oil Bath
This unit uses an oil bath lubrication system.Perform the following:
1. Checktheoillevelthroughtheoillevelsightglass(Figure2)
at the rear of the tamper foot.
Figure 3. Fuel/Oil Tank
2. Low levels of oil may result in engine seizure due to high
levels of consumption during operations.
3. Check the engine oil level (Figure 4) and if the oil level is
low, it should be refilled. Use the proper motor oil as
suggested in Table 3 .
Figure 2. Foot Housing Sight Glass
2. If oil is not visible, add 10W-30 motor oil into the oil fill plug
opening (Figure 2). The bath contains approximately 1.7
pints(800cc.)
Figure 4. Engine Oil Dipstick
NOTE
The oil level should be kept at the half
way point of the sight glass.
Table 3. Motor Oil Grade
Grade of motor oil
Season or Temperature
(higher than MS class)
Spring, Summer or Autumn
SAE 30
CAUTION:
+120° F to +15° F
Failure to understand the operation of the MT-
60HSTamping Rammer could result in severe
damage to the rammer or personal injury.
Winter
SAE 30
+40° F to +15° F
Below +15° F
SAE 10W-30
MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12) — PAGE 13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Inspection
3. Close the choke lever (Figure 5) . Turning the choke lever
90degreesclockwiseclosesthechoke.Incoldweather,start
theunitwithchokefullyclosed.Inwarmweatherorwhenthe
engine is warm, the unit can be started with choke halfway
or completely open.
4. Movethethrottlelever(Figure7)between1/4to1/2fromthe
idle position.
1. Check all nuts, bolts fasteners for tightness. Retighten as
necessary.
2. Clean anydirtfromtherecoil starterand footpedestal. Wipe
the entire unit clean before operating.
3. ReplaceanymissingordamagedSafetyOperationdecals.
4. Adjustheightofhandle.Adjusthandlebylooseningnutsand
moving handle to suit operation. Retighten nuts.
Initial Start-up
When starting the MT-75HS Tamping Rammer perform the
following:
1. Open the fuelshut- off valvebymoving the fuel cock lever
to the open position (Figure 5).
Figure 7. Throttle Lever (1/4 to 1/2)
4. Grip the recoil starter (Figure 8) handle and pull it until you
feelaslightresistance. Thenpullsharplyandquickly. Return
therecoilstarterhandletothestarterpositionbeforereleas-
ing.
Figure 5. Fuel Cock and Choke Lever
Figure 8. Recoil Starter
2. Set the engine ON/OFF switch (Figure 6) to the "ON"
position(start).
5. Ifenginefailstostart,movethechokelever(Figure 5) tothe
half open position to avoid flooding.
6. Repeat steps 1 thru 5.
7. If the engine does not start after repeated attempts,
check thesparkplug for excess fuel. Clean and replace
the spark plug as needed.
Figure 6. Engine On/Off Switch
PAGE 14 — MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
7. If the carburetor is flooded or the crankcase is loaded with
excess fuel, open the drain plug as shown in (Figure 9) and
drain out excess fuel.
Stopping The Engine
Normal Shutdown
1. Move throttle lever quickly from the FULL OPEN to IDLE
position (Figure11)andruntheengineforthreeminutesat
lowspeed.Aftertheenginecools,turntheenginestart/stop
switch to the “OFF” position (Figure 6) until engine comes
to a complete stop.
Figure 9. Drain Plug
Operation
1. To start the rammer tamping action, move the throttle lever
(Figure 10) quickly from IDLE (close) to the FULL OPEN
position.DONOTmovethethrottleleverslowlyasthismay
cause damage to the clutch or spring.
Figure 11. Throttle Lever (Idle)
2. Closethefuelshut-offvalvebymovingthefuelcockleverto
the CLOSED position. See Figure 5
CAUTION:
Make sure that the throttle lever is moved to the
FULL OPEN position. Operating the rammer at
less than full speeds can result in damage to
the clutch springs or foot.
Emergency Showdown
1. Movethethrottleleverquicklytothe IDLE position,andturn
theenginestart/stopswitch(Figure6) totheSTOPposition.
Figure 10. Throttle Lever (Full Open)
2. The MT-75HS Tamping rammer is designed to run at 5,000
rpm. At optimumrpmthefoothitsat therateof690impacts
per minute. Increasing throttle speed past factoryset rpm
does not increase impacts and may damage unit.The MT-
75HS is designed to advance while tamping. For faster
advance, pull backslightlyonthehandlesothatrearoffoot
contactssoilfirst.
MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12) — PAGE 15
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Maintenance
■
The air cleaner on the engine side will hardly be contaminated,
if it is, however after cleaning the element with kerosene, dip
it in mixed oil consisting of 3 parts of gasoline and 1 part of
engine oil. Then tightly squeeze outer primary element
(sponge) and shake off well the inner secondary element
before installing them.
Performthescheduledmaintenanceproceduresasindicated:
DAILY
■
Thoroughly remove dirt and oil from the engine and control
area.Clean or replace the air cleaner elements as necessary.
Check and retighten all fasteners as necessary. Check the
spring box and bellows for oil leaks. Repair or replace as
needed.
CLEANINGTHE OILTANK
■
Clean the inside of the oil tank regularly, preferably 2 or 3 times
a year.
WEEKLY
■
In winter, be sure to clean the inside of oil tank to avoid the
freezing of water that may have accumulated inside the tank.
■
Remove the fuel filter cap and clean the inside of the fuel
tank.
■
■
Remove or clean the filter at the bottom of the tank.
CAUTION:
Remove and clean the spark plug, then adjust the spark gap
to 0.02~0.03 inch (0.6~0.7 mm). This unit has electronic
ignition, which requires no adjustments.
If water accidently got inside the oil tank, the oil
may appear muddy. If this situation occurs,
simply flush the tank, removing all foreign matter
including water, and fill oil tank with fresh 2-
stroke outboard motor oil.
■
Clean air cleaner cover.
200 - 300 HOURS (Pre-Cleaner)
■
Remove the element from the pre-cleaner (Figure 12) at the
top of the crankcase (body side) and clean it with cleaning oil
(kerosene).
■
When cleaning the oil tank (Figure 13) perform the following
procedure:
1. Remove the cock holder cover, oil hose, red and black lead
wiresfromthefloatsensor.
PRE-CLEANER
YELLOW
GRAY
2-5 CC
13 -15 CC
SAE 30
SAE 30
Figure 12. Pre-Cleaner
■
■
Lubricate the top element (yellow) with 2~5 cc of engine oil
SAE-30.
Lubricate bottom element (gray) with 13 ~15 cc of engine oil
SAE-30 and completely squeeze out the excess oil from the
element before installing.
Figure 13. Oil Tank
PAGE 16 — MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
2. Removetheboltsthatsecuretheoiltanktothefueltank,and
drain all oil from the tank.
CLEANINGTHERAMMER
■
If using a high pressure spray washer, be careful not to splash
water directly on the air cleaner, carburetor, muffler, fuel and
oil tank caps. Excessive amounts of water may cause severe
engine damage.
3. Removecockholder,thencleanstrainerandcockholderin
a kerosene solution.
4. Make sure every part is clean and dry, then reassemble oil
tank. Filloiltankwith2-strokeoutboardmotoroil(FBclass)
to the "H" level.
Yearly
■
Check the fuel line and the oil line regularly for damage and
to ensure that there are no leaks.
FUEL AND OIL LINES
■
Replace the oil and fuel lines every two years to maintain the
performance and flexibility lines.
■
■
■
Check the fuel and oil lines regularly for damage and ensure
that there are no leaks.
Long Term Storage
Replace fuel and oil lines every 2 years to maintain
performance.
■
■
Drain fuel from fuel tank, fuel line and carburetor.
Remove spark plug and pour a few drops of motor oil into
cylinder. Crank engine 3 to 4 times so that oil reaches all
internal parts.
When replacing the oil hose perform the following procedure:
1. Replaceoilhosewithmanufacturessuggestedtypehoseor
equivalent.
■
■
Clean exterior of rammer with an oil-moistened cloth.
2. If necessary, fill oil tank with 2-stroke outboard motor oil.
3. Fill fuel tank with 25:1 fuel mix ratio.
Store unit covered with plastic sheet in moisture free and
dust free location out of direct sunlight
4. Operaterammerwith25:1fuelmixtureuntilallairisbledfrom
oil injection line.
200 - 300 HOURS (Oil Bath)
■
Drain oil reservoir on foot housing (Figure 15). Refill with
approximately 1.7 pt. (800cc) of 10W-30 motor oil. Oil should
be midway in sight glass. Break in oil should be changed
after first 50 hours.
5. Once it is certain that all air has been purged from the oil
injection line, regular unleaded gasoline may be used.
CAUTION:
It is normal for a new 2-stroke engine to emit
excess smoke, until moving parts have been
seatedtotheirnormaloperatingspecifications.
Thisexcesssmokenormallystopsafteronefull
tankoffuel.
■
The air cleaner (Figure 14) on the engine side will hardly be
contaminated, if it is, however after cleaning the element
with kerosene, dip it in mixed oil consisting of 3 parts of
gasoline and 1 part of engine oil.Then tightly squeeze outer
primary element (sponge) and shake off well the inner
secondary element before installing them.
Figure 15. Oil Drain Plug
Figure 14. Air Cleaner
MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12) — PAGE 17
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
TABLE 4. ENGINE TROUBLESHOOTING
POSSIBLE PROBLEM
SYMPTOM
Difficult to start
SOLUTION
Ignition plug being bridge?
Carbon deposit at ignition?
Check ignition system.
Clean or replace ignition.
Replace insulators.
Fuel is available but spark plug
will not ignite. (Power available
at high tension cable).
Short circuit due to defective
insulators?
Improper spark gap?
Set spark plug gap to the correct gap.
Check stop switch circuit. Replace stop switch if defective.
Replace ignition coil.
Short circuit at stop switch?
Ignition coil defective?
Fuel is available but spark plug
will not ignite. (Power NOT
available at high tension cable).
Muffler clogged with carbon
deposits?
Clean or replace muffler.
Mixed fuel quality is
inadequate?
Check fuel to oil mixture.
Fuel is available and spark plug
ignites (compression normal).
Fuel in use inadequate (water,
dust)?
Flush fuel sytem and replace with fresh fuel.
Air Cleaner clogged?
Defective cylinder head gasket?
Cylinder worn?
Clean or replace air cleaner.
Tighten cylinder head bolts or replace head gasket.
Replace cylinder.
Fuel is available and spark plug
ignites (compression low ).
Spark plug loose?
Tighen spark plug.
Operation not satisfactory
Air cleaner clogged?
Air in fuel line?
Bleed (remove air) from fuel line.
Adjust carbureator float
Not enough power available
(compression normal, no miss-
firing).
Fuel level in carbureator float
chamber improper?
Carbon deposits in cylinder?
Ignition coil defective?
Clean or replace cylinder
Flush fuel sytem and replace with fresh fuel.
Replace ignition wires, clean ignition.
Flush fuel sytem and replace with fresh fuel.
Not enough power available
(compression normal, miss-
firing).
Ignition plug often shorts?
Fuel in use inadequate (water,
dust)?
Mixed fuel quality is
inadequate?
Check fuel to oil mixture.
Excessive carbon depostion in
combustion chamber?
Clean or replace crankcase.
Engine overheats.
Exhaust or muffler clogged with
carbon.
Clean or replace muffler.
Spark plug heat value incorrect? Replace spark plug with correct type spark plug.
PAGE 18 — MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
TABLE 4. ENGINE TROUBLESHOOTING (continued)
SYMPTOM
POSSIBLE PROBLEM
SOLUTION
Operation not satisfactory
Governor adjustment improper?
Governor spring defective?
Fuel flow erratic?
Adjust governor to correct lever.
Clean or replace ignition.
Check fuel line.
Rotational speed fluctuates.
Air taken in through suction
line?
Check suction line.
Dust in rotating part?
Spring spring failure?
Clean recoil starter assembly.
Replace sprial spring.
Recoil starter not working
properly.
TABLE 5. RAMMER TROUBLESHOOTING
POSSIBLE PROBLEM
SYMPTOM
SOLUTION
Operating speed of throttle lever Set throttle lever to correct position.
is incorrectly set?
Oil in excess?
Drain excess oil. Bring to correct level.
Replace or adjust clutch.
Engine rotates but amplituide
not uniform or does not strike.
Clutch slips?
Spring Failure?
Replace sprial spring.
Speed of engine improper?
Adjust engine speed to correct operating RPM setting.
MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12) — PAGE 19
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLANATION OF CODES IN THE REMARKS COLUMN
The following section explains the different symbols and
QTY. Column
remarks used in the Parts section of this manual. Use the
help numbers found on the back page of the manual if there
are any questions.
Numbers Used — Item quantity can be indicated by a
number, a blank entry, or A/R.
A/R (As Required) is generally used for hoses or other
parts that are sold in bulk and cut to length.
NOTICE
The contents and part numbers listed in the parts
section are subject to change without notice.Multiquip
does not guarantee the availability of the parts listed.
A blank entry generally indicates that the item is not sold
separately.Other entries will be clarified in the“Remarks”
Column.
SAMPLE PARTS LIST
REMARKS Column
NO. PART NO. PART NAME
QTY. REMARKS
Some of the most common notes found in the “Remarks”
Column are listed below. Other additional notes needed
to describe the item can also be shown.
1
2%
12345
BOLT......................1 .....INCLUDES ITEMS W/%
WASHER, 1/4 IN............NOT SOLD SEPARATELY
WASHER, 3/8 IN....1 .....MQ-45T ONLY
2% 12347
3
4
12348
12349
HOSE ..................A/R ...MAKE LOCALLY
BEARING ..............1 .....S/N 2345B AND ABOVE
Assembly/Kit — All items on the parts list with the
same unique symbol will be included when this item is
purchased.
NO. Column
Indicated by:
Unique Symbols — All items with same unique
symbol
“INCLUDES ITEMS W/(unique symbol)”
(@, #, +, %, or >) in the number column belong to the
same assembly or kit, which is indicated by a note in the
“Remarks” column.
Serial Number Break — Used to list an effective serial
number range where a particular part is used.
Indicated by:
Duplicate Item Numbers — Duplicate numbers indicate
multiple part numbers, which are in effect for the same
general item, such as different size saw blade guards in
use or a part that has been updated on newer versions
of the same machine.
“S/N XXXXX AND BELOW”
“S/N XXXX AND ABOVE”
“S/N XXXX TO S/N XXX”
Specific Model Number Use — Indicates that the part
is used only with the specific model number or model
number variant listed. It can also be used to show a
part is NOT used on a specific model or model number
variant.
NOTICE
When ordering a part that has more than one item
number listed, check the remarks column for help in
determining the proper part to order.
Indicated by:
“XXXXX ONLY”
“NOT USED ON XXXX”
PART NO. Column
Numbers Used — Part numbers can be indicated by a
number, a blank entry, or TBD.
“Make/Obtain Locally” — Indicates that the part can
be purchased at any hardware shop or made out of
available items.Examples include battery cables, shims,
and certain washers and nuts.
TBD (To Be Determined) is generally used to show a
part that has not been assigned a formal part number
at the time of publication.
“Not Sold Separately”— Indicates that an item cannot
be purchased as a separate item and is either part of an
assembly/kit that can be purchased, or is not available
for sale through Multiquip.
A blank entry generally indicates that the item is not sold
separately or is not sold by Multiquip. Other entries will
be clarified in the “Remarks” Column.
PAGE 20 — MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
SUGGESTED SPARE PARTS
MT-75HS Tamping Rammer
MT-75HSTamping Rammer
1 to 3 Units
3 to 5 Units
Qty.
P/N
Description
Qty.
P/N
Description
1 .........956300130 .......... LEVER, THROTTLE LEVER
1 .........956106040 .......... WIRE, THROTTLE ASSY
1 .........402010110 .......... SPRING, RETURN
3 .........354030030 .......... ELEMENT,YELLOW
3 .........354030040 .......... ELEMENT, GRAY
3 .........1573620101 ........ ELEMENT SET, ENGINE
3 .........0650140460 ........ SPARK PLUG
2 .........956300130 .......... LEVER, THROTTLE LEVER
3 .........956106040 .......... WIRE, THROTTLE ASSY
3 .........402010110 .......... SPRING, RETURN
5 .........354030030 .......... ELEMENT,YELLOW
5 .........354030040 .......... ELEMENT, GRAY
5 .........1573620101 ........ ELEMENT SET, ENGINE
5 .........0650140460 ........ SPARK PLUG
1 .........0430440033 ........ FUEL TANK CAP
3 .........954404890 .......... FILTER, FUEL TANK
3 .........954405080 .......... STRAINER, FUEL TANK
3 .........353449000 .......... STRAINER, OIL TANK
1 .........954300390 .......... FUEL COCK ASSY
3 .........301419750 .......... FUEL FILTER, IN-LINE
2 .........0430440033 ........ FUEL TANK CAP
5 .........954404890 .......... FILTER, FUEL TANK
5 .........954405080 .......... STRAINER, FUEL TANK
5 .........353449000 .......... STRAINER, OIL TANK
2 .........954300390 .......... FUEL COCK ASSY
5 .........301419750 .......... FUEL FILTER, IN-LINE
1 .........354332700 .......... BELLOWS, ORANGE
NOTICE
Part number on this Suggested Spare Parts List may
supersede/replace the P/N shown in the text pages of
this book.
MT-75HSTamping Rammer
10+ Units
Qty.
P/N
Description
6 .........956300130 ............... LEVER, THROTTLE ASSY
8 .........956106040 ............... WIRE, THROTTLE ASSY
8 .........402010110 ............... SPRING, RETURN
18 .......354030030 ............... ELEMENT,YELLOW
18 .......354030040 ............... ELEMENT, GRAY
18 .......1573620101 ............. ELEMENT SET, ENGINE
18 .......0650140460 ............. SPARK PLUG
MT-75HS5Tatmopi1n0g RUanmimtser
Qty.
P/N
Description
4 .........956300130 .................. LEVER, THROTTLE ASSY
5 .........956106040 .................. WIRE, THROTTLE ASSY
5 .........402010110 .................. SPRING, RETURN
10 .......354030030 .................. ELEMENT,YELLOW
10 .......354030040 .................. ELEMENT, GRAY
10 .......1573620101 ................ ELEMENT SET, ENGINE
10 .......0650140460 ................ SPARK PLUG
6 .........0430440033 ............. FUEL TANK CAP
15 .......954404890 ............... FILTER, FUEL TANK
15 .......954405080 ............... STRAINER, FUEL TANK
15 .......353449000 ............... STRAINER, OIL TANK
8 .........954300390 ............... FUEL COCK ASSY
15 .......301419750 ............... FUEL FILTER, IN-LINE
4 .........354332700 ............... BELLOWS, ORANGE
4 .........354910020 ............... BELLOWS, CLAMP
6 .........050201500 ............... O-RING, UPPER GUIDE CYL.
12 .......050931500 ............... O-RING, MIDDLE GUIDE CYL.
6 .........050101100 ............... O-RING, LOWER GUIDE CYL.
6 .........050100950 ............... O-RING, FOOT PLATE GUIDE CYL.
3 .........KITCARBEC12HS.... KIT, CARBURETOR EC12HS
1 .........1616230140 ............. CARBURETOR, ASSY
1 .........1615010400 ............. RECOIL STARTER ASSY
2 .........0660000371 ............. STOP SWITCH ASSY (ON-OFF)
3 .........1611510101 ............. GASKET COMPL, HEAD
6 .........0440250180 ............. OIL SEAL, ENGINE
3 .........1613520101 ............. GASKET, EXHAUST
1 .........301421363 ............... CLUTCH, ASSY
4 .........0430440033 ................ FUEL TANK CAP
8 .........954404890 .................. FILTER, FUEL TANK
8 .........954405080 .................. STRAINER, FUEL TANK
8 .........353449000 .................. STRAINER, OIL TANK
4 .........954300390 .................. FUEL COCK ASSY
2 .........354332700 .................. BELLOWS, ORANGE
2 .........354910020 .................. BELLOWS, CLAMP
2 .........050201500 .................. O-RING, UPPER GUIDE CYL.
4 .........050931500 .................. O-RING, MIDDLE GUIDE CYL.
2 .........050101100 .................. O-RING, LOWER GUIDE CYL.
2 .........050100950 .................. O-RING, FOOT PLATE GUIDE CYL.
1 .........KITCARBEC12HS....... KIT, CARBURETOR EC12HS
1 .........0660000371 ................ STOP SWITCH ASSY (ON-OFF)
1 .........1611510101 ................ GASKET COMPL, HEAD
2 .........0440250180 ................ OIL SEAL, ENGINE
1 .........1613520101 ................ GASKET, EXHAUST
MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12) — PAGE 21
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMEPLATE AND DECALS
9
14
8
DO NOT ALLOW WATER
TO ENTER FUEL AND OIL TANKS
NPA-599
1
10
SAE 10W-30
MOTOR OIL
N
3
3
P
A
-
3
7
11
6
CAUTION
Mikasa
3650 ~ 3850 RPM
NPA 90
J
NPA-91
5
ON NO
12
O F F
OFF
13
To start, switch must be
in the “ON” position
NPA-293
2
4
MT
-75HS
NAMEPLATE
3
PAGE 22 — MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMEPLATE AND DECALS
NO.
PART NO.
920106460
920203980
920203290
PART NAME
QTY.
REMARKS
1
DECAL: MIKASA MARK
DECAL: ELEMENT SET
1
1
*
*
2
*
3
DECAL: READ OWNER'S MANUAL 1
PLATE: SERIAL NO. .........................1..........ORDER FROM MQ SER. DEPT. W/MODEL & S/N
DECAL: PRE-CLEANER
DECAL ENGINE R.P.M 3650-3850
DECAL: FUEL COCK
4
5
920107000
920200900
920203990
920203330
920204370
920201950
920205810
920204840
920202930
920205990
DCLMT75HS
1
1
1
1
1
1
1
1
1
1
*
6
*
7
*
8
DECAL: EAR PROTECTION
DECAL: PRE CLEANER
DECAL: MOTOR OIL
*
9
*
10
*
11
DECAL: CAUTION
*
12
DECAL: SWITCH ON-OFF
DECAL: SWITCH ON
*
13
*
14
DECAL: CAUTION (WATER)
*
15
DECAL KIT ........................................1..........INCLS. ALL ITEMS W/
*
MT-75HS — NAME PLATES AND DECALS
MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12) — PAGE 23
Download from Www.Somanuals.com. All Manuals Search And Download.
CRANKCASE AND ENGINE ASSY.
CRANKCASE AND ENGINE ASSY.
PAGE 24 — MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
CRANKCASE AND ENGINE ASSY.
CRANKCASE AND ENGINE ASSY.
NO.
1
PART NO.
355113110
040006207
040006204
952400130
011708025
355334280
040006304
080100520
952400130
011708025
355447200
040006204
080200350
352441340
060404010
050100950
355447210
952405610
952405490
002210820
041006007
355447230
050300440
002210820
301421363
943060020
943050050
943020020
943030020
943060010
301010210
355334290
355010050
352444450
011706020
911101213
0053204201
354211841
354330590
002210820
507010110
956300130
956106040
402010110
959403750
303010450
012710040
354030011
354030020
354030030
354030040
354030050
002200815
0566000170
PART NAME
QTY.
REMARKS
CRANK CASE
BEARING 6207
BEARING 6204
WASHER 9304
1
1
1
1
2
3
4
5
BOLT 8X25 H, SW ............................... 1 ............REPLACES 002210825
8
CONNECTING ROD
BEARING 6304
STOP RING R-52
WASHER 9304
1
1
1
1
9
10
11
12
21
22
23
24
25
26
27
28
29
30
31
33
34
35
37
37-1
37-2
37-3
37-4
37-5
38
BOLT 8X25 H, SW ............................... 1 ............REPLACES 002210825
PINION
BEARING 6204
STOP RING S-35
SPACER
OIL SEAL TC-40528
O-RING G-95
1
1
1
1
1
1
1
1
1
1
1
1
2
CLUTCH DRUM
KEY 5X5X19R
LOCK WASHER
BOLT 8X20 H, SW
BEARING 6007Z
BEARING COVER
O-RING S-44
BOLT 8X20 H, SW ............................... 2 ............REPLACES 002210620
CLUTCH ASSY .................................... 1 ............INCLUDES ITEMS W/
*
CLUTCH GUIDE/1B
CLUTCH BOSS C812
CLUTCH SHOE C812
CLUTCH SPRING C812
CLUTCH GUIDE
1
1
4
2
1
1
1
1
1
*
*
*
*
*
LOCK WASHER CLUTCH
CRANK GEAR
*
41
42
FRONT COVER
43
PACKING, FRONT COVER
44
BOLT 6X20 H,SW ................................ 9 ............REPLACES 002210620
51
ENGINE ASSY EC12HS
WOODRUFF KEY
1
1
REPLACES 911101211
52
54
AIR CLEANER ASSY ........................... 1 ............INCLUDES ITEMS W/#
55
INTAKE PIPE
1
4
1
1
1
56
BOLT 8X20 H, SW
57
CLAMP TC-200
59
THROTTLE LEVER AY 25
THROTTLE WIRE S620-740
60
61
RETURN SPRING ............................... 1 ............REPLACES 301010950
62
RUBBER, SLIP STOP
BAND
1
1
63
64
BOLT 10X40 H,SW .............................. 3 ............REPLACES 012710040
65#
66#
67#
68#
69#
70
BODY /W-CLEANER
BACK PLATE
1
1
1
1
1
1
1
ELEMENT, YELLOW
ELEMENT, GRAY
ELEMENT FRAME
BOLT 8X15 SW
71
CLAMP OIL ALERT
MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12) — PAGE 25
Download from Www.Somanuals.com. All Manuals Search And Download.
GUIDE CYLINDER AND FOOT ASSY.
CYLINDER GUIDE AND FOOT ASSY.
PAGE 26 — MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
GUIDE CYLINDER AND FOOT ASSY.
CYLINDER GUIDE AND FOOT ASSY.
NO.
1
PART NO.
352423290
080100150
355334300
355447240
020316130
355447250
355447260
355447270
355334310
355213000
050100900
014210020
014210040
953405270
953405260
355213010
050201500
050931500
012710035
354010010
354329380
354442340
001210840
020108060
050100950
354446170
355113130
953405270
953405260
959010150
953404670
PART NAME
PISTON PIN
STOP RING R-15
PISTON ROD
PISTON END
QTY.
REMARKS
1
2
1
1
2
3
4
5
NUT M16, P1.5 ..................................... 1 ............REPLACES 020116130
6
STOPPER UPPER
STOPPER, LOWER
MAIN SPRING
SPRING CYLINDER
FOOT PLATE
O-RING G-90
1
1
2
1
1
1
7
8
9
10
11
12
13
14
15
21
22
23
24
25
26
27
28
29
30
31
41
42
43
44
45
A
SOCKET HEAD BOLT 10X20 T .......... 4 ............REPLACES 014210020
SOCKET HEAD BOLT 10X40 T .......... 4 ............REPLACES 001521040
PLUG 1/4X14 13L
PACKING 1/4 (CU)
GUIDE CYLINDER
O-RING P-150
1
1
1
1
2
O-RING JASO3150
BOLT 10X35 H,SW .............................. 4 ............REPLACES 002211035
BELLOWS(L) ORANGE
BELLOWS CLAMP
BAND GUIDE, BELLOWS
BOLT 8X40 H
1
2
2
2
REPLACES 354332700
NUT M8 ................................................ 2 ............REPLACES 020108060
O-RING G-95
PIN 6D-8.5L
1
2
1
1
1
1
1
PROTECTION SLEEVE
PLUG 1/4X14 13L
PACKING 1/4 (CU)
LEVEL GAUGE, PLUG TYPE
COPPER PACKING 17X25.5X1
FOOT ASSY 285W-E/F COVER ......... 1 ............INCLS. ITEMS W/ CONTACT UNIT SALES DEPT.
*
ACCESSORY ITEM
51
352108220
352108230
352333380
015110055
021110120
030210250
015112075
021112140
030212300
FOOT 285B-331L
METAL SHEET
FOOT COVER
1
1
1
*
52
*
53
*
54
SUNK HEAD BOLT 10X55 H ............... 7 ............REPLACES 001611051
NYLON NUT M10 ................................ 7 ............REPLACES 022711012
*
55
*
56
WASHER SW M10
7
*
61
SUNK HEAD BOLT 12X70 H ............... 4 ............REPLACES 015112060
NYLON NUT M12 ................................ 4 ............REPLACES 022711214
62
63
WASHER SW M12
4
MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12) — PAGE 27
Download from Www.Somanuals.com. All Manuals Search And Download.
TANK AND HANDLE ASSY.
TANK AND HANDLE ASSY.
PAGE 28 — MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
TANK AND HANDLE ASSY.
TANK AND HANDLE ASSY.
NO.
A
PART NO.
PART NAME
QTY.
REMARKS
353213710 CPL
355115020
351319900
001521020
033121009
002211020
355113610
954404890
361910020
351437785
953405640
954406020
954405080
954406010
001220830
952401450
030208200
022710809
954405990
0642001410
0642001420
0642001430
301418140
954404590
351436350
954403030
301419750
OIL TANK ASSY W/CAP ......................... 1 ............ REPLACES 353910030 CPL
HANDLE (ROLLER) ............................... 1 ............ REPLACES 355113570
1
2
SHOCK ABSORBER 100D-45B
SOCKET HEAD BOLT 10 x 20
TOOTHED LOCK WASHER B M10
BOLT 10 x 20 H, SW
FUEL TANK
FILTER, TANK
TANK CAP ASSY (ORANGE)
HOLDER, COCK
2 ............ REPLACES 35131990
3
4
4
4
1
1
1
1
1
1
1
1
2
2
2
2
4
5
11
12
13
14
15
15
16
16
17
18
19
20
21
21-1#
21-2#
21-3#
22
23
24
25
30
31
31-1
32
32-1
35
36
37
38
39
40
41
42
45
47
PACKING, COCK HOLDER
PACKING, FUEL TANK
STRAINER (100)
STRAINER (110)
BOLT 8 x 30
WASHER 8, 5 x 22 x 3
SW M8
NYLON NUT M8
FUEL COCK ASSY................................. 1 ............ INCLUDES ITEMS W/#
BOWL
STRAINER SCREEN
PACKING
1
1
1
1
2
1
2
1
FUEL HOSE B-150
HOSE BAND 9.5D
FUEL HOSE R-150
HOSE BAND (8)
FUEL FILTER CP, MQ75MIC
OIL TANK ................................................ 1 ............ MUST ORDER NEW OIL TANK ASSY.
*
*
353213710
OIL TANK
1
1
1
OIL TANK CAP
*
353030070
OIL TANK CAP CP (YELLOW)
STRAINER, OIL TANK ............................ 1 ............ NO LONGER USED
COVER, COCK HOLDER ...................... 1 ............ REPLACES 355448090
355448071
009110011
030208200
952401450
001200610
030206150
2267510103
355448280
1616391308
SOCKET HEAD SCREW 8 x 20
SW M8
2
2
2
1
1
1
1
1
WASHER 8.5 x 22 x 3
BOLT 6 x 10
SW M6
CLAMP
WIRE CP/MT-63HS
HOSE
MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12) — PAGE 29
Download from Www.Somanuals.com. All Manuals Search And Download.
TANK AND HANDLE ASSY.
TANK AND HANDLE ASSY.
PAGE 30 — MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
TANK AND HANDLE ASSY.
TANK AND HANDLE ASSY.
NO.
PART NO.
PART NAME
QTY.
REMARKS
5
3
353448990
353449001
353449010
353030080
091005015
031105080
952405970
353449240
353450220
954403030
1616391008
1616391608
1616391518
353910020
355450600
361910040
091005025
031105080
PACKING, OIL TANK CAP
1
54
55
58
59
60
60
62
62-1
63
64
65
66
67
68
69
70
71
STRAINER, OIL TANK ............................ 1 ................ REPLACES 353449000
STRAP, OIL TANK
WELL NUT
2
1
1
1
1
1
1
1
1
1
SCREW 5x 5
PW M5
WASHER 6. 4D-20D
OUTER HOSE 6 x 9 x 65
GUARD, OIL HOUSE
HOSE BAND
CLIP EC12HS
CLIP
JOINT ...................................................... 1 ................ REPLACES 1616391508
OIL SENSOR ASSY
OUTER LINER 525L
1
1
ROLLER ASSY, W/PIN ........................... 1 ................ REPLACES 955200051
SCREW 5 x 25
WASHER PW M5
FLANGE NUT M5 H
4
4
4
72
022610505
MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12) — PAGE 31
Download from Www.Somanuals.com. All Manuals Search And Download.
ROBIN EC12HS ENGINE — CRANKCASE ASSY.
CRANKCASE AND CYLINDER ASSY.
PAGE 32 — MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
ROBIN EC12HS ENGINE — CRANKCASE ASSY.
CRANKCASE AND CYLINDER ASSY.
NO.
PART NO.
PART NAME
QTY.
REMARKS
1
0
1611040301
0440250180
0440080010
0600250010
0310060010
0013208351
0105060070
0241060010
0011406550
0011406400
0013208401
0013208651
0643000101
0021708000
030208200
0031008000
1611240311
1571310113
1611510101
0130080071
0011408350
CRANK CASE CP ................................ 1 ............INCLUDES ITEMS W/
*
30
36
40
50
OIL SEAL EC13
OIL SEAL VC 8X14X4
BALL BEARING 6205C3
DOWEL PIN
2
1
1
2
2
2
1
3
2
2
2
1
*
*
*
*
60 #
STUD
*
70 #
STUD
*
82
GROMMET
*
95
BOLT AND WASHER ASSY
BOLT AND WASHER ASSY
STUD
*
96
*
115
*
*
116
STUD
DRAIN COCK
140
180
190
200
510
610
620
630
631
NUT ...................................................... 4 ............REPLACES 0021808000
WASHER .............................................. 4 ............REPLACES 0032008000
WASHER
4
CYLINDER CP ..................................... 1 ............INCLUDES ITEMS W/# REPLACES 1611240301
CYLINDER HEAD
1
GASKET COMPL.(HEAD) ................... 1 ............REPLACES 161151011
BOLT AND WASHER ASSY
BOLT AND WASHER ASSY
2
2
MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12) — PAGE 33
Download from Www.Somanuals.com. All Manuals Search And Download.
ROBINEC12HS ENGINE— CRANKSHAFTANDPISTONASSY.
CRANKSHAFT AND PISTON ASSY.
PAGE 34 — MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
ROBIN EC12HS ENGINE— CRANKSHAFTANDPISTONASSY.
CRANKSHAFT AND PISTON ASSY.
NO.
PART NO.
PART NAME
QTY.
1
REMARKS
1
0
1612040200
1612500103
1612500203
0021714000
0032014000
0053204201
1574170101
1574190103
0173120010
1572330103
1612340101
1612340201
1612340301
1612350107
1612350207
1612350307
0565120010
0610120010
CRANK SHAFT ASSY
SPACER 0.IT
40
3
40
SPACER 0.3T
NUT
1
50
1
60
SPRING WASHER
WOODRUFF KEY
GOVERNOR PLATE COMPL.
GOVERNOR SLEEVE
LOCK NUT
1
70
1
130
140
170
350
360
360
360
370
370
370
380
390
1
1
1
PISTON PIN
1
PISTON COMPL. STD
PISTON COMPL. 0.25 OS
PISTON COMPL. 0.50 OS
PISTON RING SET STD
PISTON RING SET 0.25 OS
PISTON RING SET 0.50 OS
CLIP
1
1
1
1
1
1
2
NEEDLE BEARING
1
MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12) — PAGE 35
Download from Www.Somanuals.com. All Manuals Search And Download.
ROBIN EC12HS ENGINE — GOVERNOR ASSY.
GOVERNOR ASSY.
PAGE 36 — MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
ROBIN EC12HS ENGINE — GOVERNOR ASSY.
GOVERNOR ASSY.
NO.
10
PART NO.
PART NAME
QTY.
REMARKS
1614230113
1064220103
2274270101
1064280113
1614250113
1574210103
0043504060
1064240101
0021906000
030206150
0043504080
1614341001
1574510101
1574610103
0110060020
0043106350
0021706000
1614420113
0110060020
0115040010
1614350111
0110060020
GOVERNOR LEVER
GOVERNOR SHAFT
GOVERNOR ROD
ROD SPRING
1
1
1
1
1
1
2
20
30
40
80
GOVERNOR SPRING
GOVERNOR YOKE
SCREW
90
100
110
120
130
140
310
311
312
313
360
370
390
420
440
460
461
ADJUSTING PLATE 88 .......................1 ............REPLACES 1574240103
NUT
1
SPRING WASHER ............................... 1 ............REPLACES 0032006000
SCREW AND WASHER ASSY ............ 1 ............REPLACES 0043604080
SPEED CONTROL CP ........................ 1 ............REPLACES 1614341011
COVER
1
1
1
1
1
1
1
1
WASHER
FLANGE BOLT
SCREW
NUT
WIRE BRACKET
FLANGE BOLT
BOLT
STOP PLATE COMP ........................... 1 ............REPLACES 1614350121
FLANGE BOLT
1
MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12) — PAGE 37
Download from Www.Somanuals.com. All Manuals Search And Download.
ROBINEC12HS ENGINE — MUFFLER/AIR CLEANER ASSY.
MUFFLER AND AIR CLEANER ASSY.
PAGE 38 — MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
ROBINEC12HS ENGINE — MUFFLER/AIR CLEANER ASSY.
MUFFLER AND AIR CLEANER ASSY.
NO.
310
330
331
340
350
355
360
510
510-2
PART NO.
PART NAME
QTY.
REMARKS
1613010111
1613500101
1613510101
1613520101
020108060
030208200
0011308160
1613270310
2263272008
1613261008
1573620101
0732004430
1063291203
1573500103
0176060020
1613600203
0016606120
MUFFLER COMPL.
MUFFLER BRACKET
MUFFLER BRACKET
1
1
1
GASKET CP (EXHAUST) ................ 1 ............REPLACES 1613520111
NUT .................................................. 2 ............REPLACES 0021908000
SPRING WASHER........................... 2 ............REPLACES 0032008000
BOLT AND WASHER ASSY
7
AIR CLEANER ASSY .......................1 ............INCLUDES ITEMS W/
*
GASKET (AIR CLEANER)
ELEMENT
1
1
1
1
1
2
2
1
*
510-100
520
*
ELEMENT SET
*
528
LABEL(CHOKE)
540
550
590
620
630
INSULATOR
GASKET, INSULATOR
SELF LOCK NUT
BRACKET (CLEANER)
BOLT AND WASHER ASSY ............ 3 ............REPLACES 0011006120
MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12) — PAGE 39
Download from Www.Somanuals.com. All Manuals Search And Download.
ROBIN EC12HS ENGINE — CARBURETOR ASSY.
CARBURETOR AND OIL PUMP ASSY.
PAGE 40 — MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
ROBIN EC12HS ENGINE — CARBURETOR ASSY.
CARBURETOR AND OIL PUMP ASSY.
NO.
PART NO.
PART NAME
CARBURETOR ASSY ............... 1 ...............INCLS. ITEMS W/# REPLACES 1616230140
THROTTLE VALVE
QTY.
REMARKS
210
1616230100
1616253508
5806083310
2376245108
2076242008
1616235408
2306244608
1616252008
2246245208
1616253080
1616235108
5806083400
2146251508
1616235008
2366245008
2366254008
2366250508
1616244008
2266240008
1616235308
2366235008
2066244608
1616240008
2366244508
2366254108
1616390110
0011406250
0565220011
1616350101
1573500103
210-1#
210-3#
210-4#
210-5#
210-6#
210-7#
210-8#
1
CHOKE VALVE ........................... 1 ...............REPLACES 161625208
SCREW
1
1
1
1
PILOT JET
ADJUSTER
SPRING
*
*
*
SHAFT ASSY (CHOKE) ............ 1 ...............REPLACES 1616252038
210-10#
210-11#
210-12#
210-14#
210-15#
210-16#
210-17#
210-18#
210-19#
210-20#
210-22#
210-26#
210-28#
210-41#
210-44#
210-82#
SCREW MC-0414
SHAFT ASSY (THROTTLE)
BOLT
1
1
1
NEEDLE ..................................... 1 ...............REPLACES 1616235208
*
FLOAT PIN
1
1
1
1
1
1
1
1
1
1
1
1
1
FLOAT BODY
PACKING 826-08003
PACKING 826-42001
FLOAT 859-14004
MAIN NOZZLE
MAIN JET
*
*
*
HOSE
SCREW
SPRING
*
*
*
MAIN JET
SPRING 730-03012
PACKING
210-104#
700
*
OIL PUMP ASSY........................ 1 ...............REPLACES 1616390100
710
BOLT AND WASHER ASSY
CLIP
2
1
1
1
715
720
COLLAR CP (OIL INJ.)
GASKET, INSULATOR
725
*
KITCARBEC12HS KIT,CARBURETOR EC12HS .... 1 ...............INCLUDES ITEMS W/
*
*
MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12) — PAGE 41
Download from Www.Somanuals.com. All Manuals Search And Download.
ROBIN EC12HS ENGINE — RECOIL STARTER ASSY.
RECOIL STARTER AND BLOWER ASSY.
PAGE 42 — MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
ROBIN EC12HS ENGINE — RECOIL STARTER ASSY.
RECOIL STARTER AND BLOWER ASSY.
NO.
10
PART NO.
PART NAME
QTY.
REMARKS
1615110701
0011406200
0011406550
1615260203
1619186003
0110060020
0152060070
1615010400
2155051508
1615012008
1615011008
2365010108
1615012508
2275013108
2275013508
1615014518
1615015008
2275015208
920100240
0011406120
0011306250
2267510103
1615500113
FAN COVER ................................. 1 ............................. REPLACES 1615110706
40
BOLT AND WASHER ASSY
BOLT AND WASHER ASSY
CYLINDER BAFFLE
LABEL(ENGINE NAME)
FLANGE BOLT
3
2
1
1
3
3
41
50
70
80
81
TAPPING BOLT
210
210-1
210-2
210-3
210-4
210-5
210-6
210-7
RECOIL STARTER ASSY ............ 1 ............................. INCLUDES ITEMS W/
*
SPIRAL SPRING
REEL
STARTER ROPE
STARTER KNOB
RATCHET
1
1
1
1
2
1
2
1
1
1
1
*
*
*
*
*
FRICTION SPRING
RETURN SPRING
STARTER PULLEY
RATCHET GUIDE
SET SCREW
**
*
210-11
210-35
210-49
216
*
*
*
DECAL, (M-MARK)
220
BOLT AND WASHER ASSY......... 4 ............................. REPLACES 0011306120
230
BOLT AND WASHER ASSY
CLAMP
3
1
1
231
240
PULLEY SPACER
MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12) — PAGE 43
Download from Www.Somanuals.com. All Manuals Search And Download.
ROBIN EC12HS ENGINE — ELECTRIC DEVICE ASSY.
MAGNETO ASSY.
PAGE 44 — MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
ROBIN EC12HS ENGINE — ELECTRIC DEVICE ASSY.
MAGNETO ASSY.
NO.
10
PART NO.
PART NAME
QTY.
REMARKS
1617012008
1617013008
FLYWHEEL COMPL.
1
11
IGNITION COIL CP .......................1 ............... S/N 3531 AND BELOW
......................................................................... REPLACES 1617120101
IGNITION COIL CP .......................1............... S/N 3532 AND ABOVE
11
30
50
56
60
70
80
81
95
100
110
1617120111
0011006200
2147312201
1507520103
0669900217
0043504120
1577500203
1617500103
0659000010
0650140460
2307510113
BOLT AND WASHER ASSY
WIRE 22 CP
2
1
1
CLAMP
STOP SWITCH AY (ON-OFF)......1............... REPLACES 0660000371
SCREW AND WASHER ASSY
GROMMET
2
1
1
1
1
1
GROMMET, HIGH
PLUG TERMINAL
SPARK PLUG
SPARK PLUG CAP
MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12) — PAGE 45
Download from Www.Somanuals.com. All Manuals Search And Download.
ROBIN EC12HS ENGINE — LOOSE PARTS
LOOSE PARTS ASSY.
PAGE 46 — MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
ROBIN EC12HS ENGINE — LOOSE PARTS
LOOSE PARTS ASSY.
NO.
10
20
30
40
50
60
70
80
PART NO.
PART NAME
QTY.
REMARKS
0053204201
402010110
1617260101
2267510103
1507520103
0566000170
011008015
1616391008
WOODRUFF KEY
1
COIL SPRING.................................. 1 .................. REPLACES 0830000010
SWITCH FLOAT CP
CLAMP
CLAMP
CLAMP
1
1
1
1
BOLT AND WASHER ASSY............ 1 .................. REPLACES 0011308120
CLIP
1
MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12) — PAGE 47
Download from Www.Somanuals.com. All Manuals Search And Download.
TERMS AND CONDITIONS OF SALE — PARTS
TERMS AND CONDITION OF SALE — PARTS
Effective: July 1, 2000
PAYMENT TERMS
4. Freight is at the sender’s expense. All PRICINGANDREBATES
partsmustbereturnedfreightprepaidto
Terms of payment for parts are net 10 days.
Prices are subject to change without prior
notice.Pricechangesareeffectiveonaspecific
Multiquip’sdesignatedreceivingpoint.
5. Parts must be in new and resalable dateandallordersreceivedonorafterthatdate
condition,intheoriginalMultiquippackage willbebilledattherevisedprice. Rebatesfor
(ifany),andwithMuiltiquippartnumbers price declines and added charges for price
FREIGHTPOLICY
All parts orders will be shipped collect or
prepaidwiththechargesaddedtotheinvoice.
All shipments are F.O.B. point of origin.
Multiquip’sresponsibilityceaseswhenasigned
manifesthasbeenobtainedfromthecarrier,
andanyclaimforshortageordamagemustbe
settledbetweentheconsigneeandthecarrier.
clearlymarked.
increaseswillnotbemadeforstockonhandat
thetimeofanypricechange.
6. Thefollowingitemsarenotreturnable:
Multiquip reserves the right to quote and sell
directtoGovernmentagencies,andtoOriginal
Equipment Manufacturer accounts who use
our products as integral parts of their own
products.
a. Obsolete parts. (If an item is listed
inthepartspricebookasbeing
replaced by another item, it is
obsolete.)
b. Any parts with a limited shelf life
(such as gaskets, seals, “O” rings,
andotherrubberparts)thatwere
purchasedmorethansixmonths
priortothereturndate.
MINIMUMORDER
SPECIALEXPEDITINGSERVICE
TheminimumchargeforordersfromMultiquip
is $15.00 net. Customers will be asked for
instructionsregardinghandlingofordersnot
meetingthisrequirement.
A$20.00to$50.00surchargewillbeaddedto
theinvoiceforspecialhandlingincludingbus
c. Anylineitemwithanextendeddealer shipments, insured parcel post or in cases
netpriceoflessthan$5.00.
where Multiquip must personally deliver the
partstothecarrier.
d. Special order items.
RETURNEDGOODSPOLICY
e. Electricalcomponents.
Returnshipmentswillbeacceptedandcredit
will be allowed, subject to the following
provisions:
LIMITATIONSOFSELLER’SLIABILITY
f.
Paint,chemicals,andlubricants.
Multiquip shall not be liable here under for
damagesinexcessofthepurchasepriceofthe
itemwithrespecttowhichdamagesareclaimed,
andinnoeventshallMultiquipbeliableforloss
of profit or good will or for any other special,
consequentialorincidentaldamages.
g. Decalsandpaperproducts.
h. Itemspurchasedinkits.
1. AReturnedMaterialAuthorizationmust
beapprovedbyMultiquippriortoshipment.
7. Thesenderwillbenotifiedofanymaterial
receivedthatisnotacceptable.
2. ToobtainaReturnMaterialAuthorization,
alistmustbeprovidedtoMultiquipParts
Sales that defines item numbers, 8. Such material will be held for 5 working
quantities,anddescriptionsoftheitemsto
bereturned.
days from notification, pending
instructions. If a reply is not received
within5days,thematerialwillbereturned
tothesenderathisexpense.
LIMITATIONOFWARRANTIES
a. Thepartsnumbersanddescriptions
mustmatchthecurrentpartsprice
list.
Nowarranties,expressorimplied,aremadein
connection with the sale of parts or trade
accessories nor as to any engine not
manufacturedbyMultiquip.Suchwarranties
made in connection with the sale of new,
complete units are made exclusively by a
statement of warranty packaged with such
units, and Multiquip neither assumes not
authorizes any person to assume for it any
other obligation or liability whatever in
connectionwiththesaleofitsproducts.Apart
fromsuchwrittenstatementofwarranty,there
arenowarranties,express,impliedorstatutory,
which extend beyond the description of the
productsonthefacehereof.
9. Creditonreturnedpartswillbeissuedat
dealer net price at time of the original
purchase,lessa15%restockingcharge.
b. The list must be typed or computer
generated.
10. In cases where an item is accepted for
which the original purchase document
can not be determined, the price will be
basedonthelistpricethatwaseffective
twelvemonthspriortotheRMAdate.
c. Thelistmuststatethereason(s)for
thereturn.
d. The list must reference the sales
order(s)orinvoice(s)underwhich
theitemswereoriginallypurchased.
11. Credit issued will be applied to future
purchasesonly.
e. Thelistmustincludethenameand
phonenumberoftheperson
requestingtheRMA.
3. A copy of the Return Material
Authorizationmustaccompanythereturn
shipment.
PAGE 48 — MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12)
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE PAGE
NOTES
MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12) — PAGE 49
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION AND PARTS MANUAL
HERE’S HOW TO GET HELP
PLEASE HAVE THE MODEL AND SERIAL
NUMBER ON-HAND WHEN CALLING
UNITED STATES
Multiquip Corporate Office
MQ Parts Department
18910 Wilmington Ave.
Carson, CA 90746
Contact: mq@multiquip.com
Tel. (800) 421-1244
Fax (800) 537-3927
800-427-1244
310-537-3700
Fax: 800-672-7877
Fax: 310-637-3284
Service Department
Warranty Department
800-421-1244
310-537-3700
Fax: 310-537-4259
800-421-1244
310-537-3700
Fax: 310-943-2249
Technical Assistance
800-478-1244
Fax: 310-943-2238
MEXICO
UNITED KINGDOM
MQ Cipsa
Multiquip (UK) Limited Head Office
Carr. Fed. Mexico-Puebla KM 126.5
Momoxpan, Cholula, Puebla 72760 Mexico
Contact: pmastretta@cipsa.com.mx
Tel: (52) 222-225-9900
Unit 2, Northpoint Industrial Estate, Tel: 0161 339 2223
Fax: (52) 222-285-0420 Globe Lane,
Dukinfield, Cheshire SK16 4UJ
Contact: sales@multiquip.co.uk
Fax: 0161 339 3226
CANADA
Multiquip
4110 Industriel Boul.
Laval, Quebec, Canada H7L 6V3
Contact: jmartin@multiquip.com
Tel: (450) 625-2244
Tel: (877) 963-4411
Fax: (450) 625-8664
© COPYRIGHT 2012, MULTIQUIP INC.
Multiquip Inc, the MQ logo and the Mikasa logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks
are the property of their respective owners and used with permission.
This manual MUST accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold.
The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations, descriptions, references and technical data contained in
this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifications, design or the information published
in this publication at any time without notice and without incurring any obligations.
Your Local Dealer is:
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Miele Coffeemaker CVA 2650 User Manual
MTD Log Splitter 249 610 000 User Manual
MTX Audio Stereo System AAL10 User Manual
NETGEAR Network Router FVS336G User Manual
NETGEAR TV Antenna ANT24D18v2 User Manual
Nilfisk Advance America Vacuum Cleaner GD 910 User Manual
Omega Engineering Stud Sensor FP 5060 User Manual
Oregon Clock AWS888 User Manual
Panasonic Flat Panel Television CT 27D42 User Manual
Panasonic Vacuum Cleaner MC CL935 User Manual