Multi Tech Equipment Network Card GPRS USB User Manual

MultiModem® GPRS USB  
Wireless Modem  
MTCBA-G-U  
User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Contents  
Chapter 1 – Product Description and Specifications................................................................................................4  
Product Description.................................................................................................................................................4  
Features..................................................................................................................................................................4  
Application Overview...............................................................................................................................................5  
Application Types.............................................................................................................................................5  
Benefits/Features in Applications.....................................................................................................................5  
Safety......................................................................................................................................................................6  
General Safety.................................................................................................................................................6  
RF Interference Issues.....................................................................................................................................6  
Vehicle Safety..................................................................................................................................................6  
Maintenance of Your Modem...........................................................................................................................6  
Your Responsibility ..........................................................................................................................................6  
Package Contents...................................................................................................................................................7  
Specifications..........................................................................................................................................................8  
Antenna/RF Specifications...............................................................................................................................8  
Interfaces ................................................................................................................................................................9  
LEDs................................................................................................................................................................9  
AT Command Reference Guides.....................................................................................................................9  
Chapter 2 – Activation and Installation ....................................................................................................................10  
Step 1 – Activate Your Wireless Account..............................................................................................................10  
Step 2 – Insert the SIM Card into the Holder ........................................................................................................10  
Step 3 – Connect the Antenna and USB Cable ....................................................................................................11  
Step 4 – Handset Connection (Optional)...............................................................................................................11  
Step 5 – Attach the Modem to a Flat Surface (Optional).......................................................................................12  
Step 6 – Install the Modem Driver.........................................................................................................................13  
Introduction....................................................................................................................................................13  
Installing the Modem Driver in Windows XP/2003 .........................................................................................13  
Installing the Modem Driver in Windows 2000 ...............................................................................................17  
Chapter 3 – Using Your Wireless Modem ................................................................................................................21  
Phone Number for the Wireless Modem ...............................................................................................................21  
Examples of Useful AT Commands ......................................................................................................................21  
Verifying Signal Strength ...............................................................................................................................21  
Checking Network Registration and Roaming Status.....................................................................................21  
Checking the Modem’s Identity......................................................................................................................21  
Establishing a Voice Call ...............................................................................................................................22  
Establishing a Circuit-Switched Data (CSD) Connection ...............................................................................22  
Answering a Circuit-Switched Data (CSD) Connection..................................................................................22  
Using Short Message Services (SMS)..................................................................................................................23  
SMS Examples ..............................................................................................................................................24  
Internet Access .....................................................................................................................................................26  
Connecting to the GPRS Network for Internet Access...................................................................................26  
Mobile PhoneTools ...............................................................................................................................................28  
Chapter 4 – Troubleshooting and Frequently Asked Questions............................................................................29  
Troubleshooting Examples....................................................................................................................................29  
Frequently Asked Questions.................................................................................................................................30  
Chapter 5 – Reference Information...........................................................................................................................32  
Wireless Modem Reference Information...............................................................................................................32  
Appendix A – Warranty and Repairs ........................................................................................................................33  
Appendix B - Waste Electrical and Electronic Equipment (WEEE) Statement .....................................................35  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1 – Product Description and Specifications  
Chapter 1 – Product Description  
and Specifications  
Product Description  
The Multi-Tech MultiModemGPRS-U is an external data/fax/voice wireless modem with a USB interface. It supports  
mobile originated short message service (SMS) and mobile-terminated SMS. Designed for global use, it offers  
standards-based multi-band GSM/GPRS Class 10 performance. This ready-to-deploy, standalone modem allows  
developers to add wireless communication to products with a minimum of development time and expense. The  
MultiModem GPRS is based on industry-standard open interfaces, is fully type approved, and can be desktop or  
panel mounted.  
Models:  
MTCBA-G-U-F1 is the 900/1800 MHz GPRS USB modem (RS-232)  
MTCBA-G-U-F2 is the 850/1900 MHz GPRS USB modem (RS-232)  
Other Product Codes:  
NAM is the model for US and Canada  
GB/IE is the model for Great Britain and Ireland  
Euro/ROW is the model for Europe and the rest of the world  
A Note About Documentation:  
Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time in the  
content hereof without obligation of Multi-Tech Systems, Inc., to notify any person or organization of such revisions or  
changes. Check Multi-Tech’s Web site for current versions of our product documentation.  
Features  
GPRS Class 10 operation  
Dual-band 850/1900 or 900/1800 GSM/GPRS  
GSM Class 1 and Class 2 Group 3 FAX  
Desktop or panel mounting  
Short Message Services including text and PDU, point-to-point, cell  
broadcast  
14.4K GSM circuit switched data  
SMA antenna connector and SIM socket  
Serial interface supports DTE speeds to 115.2K  
AT command compatible  
MNP2 V.42bis data compression  
Numerous LEDs provide operational status  
ME + SIM phone book management  
Fixed dialing number  
SIM Toolkit Class 2  
SIM, network and service provider locks  
Real time clock  
Alarm management  
UCS2 character set management  
Packet data up to 85K bps  
Embedded TCP/IP stack  
Circuit-switched data (GSM) up to 14.4K bps transparent and non-  
transparent  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 – Installation  
Application Overview  
Application Types  
With circuit switched data rates up to 14.4K bps, the MultiModem GPRS is targeted at applications that  
periodically need to send or receive data over a wireless network. It is an ideal solution for:  
Appliances  
ATM Terminals  
Automotive  
Data Collection  
Gas Pumps  
Industrial and Medical Remote Monitoring Systems  
Remote Diagnostics  
Remote Metering  
Security Systems  
Vending/Gaming Machines  
Other devices requiring wireless connectivity.  
Note: The Wireless MultiModem must be mounted with at least 8  
inches (20 cm) of clearance from the human body.  
Benefits/Features in Applications  
Short Development Time. The MultiModem GPRS can make your existing and next generation device,  
machine, or system, communication-ready without requiring any hardware changes to its design. It actually  
provides faster time-to-market because it relieves the burden and expense of obtaining network and RF  
approvals. This complete, ready-to-deploy wireless modem allows you to enhance your product while you  
focus on developing its core features.  
Voice Features. The MultiModem GPRS provides telephony and Dual Tone Multi Frequency (DTMF)  
functionality. It also allows for emergency calls as well as echo cancellation and noise reduction (option), and  
full rate, enhanced Full Rate and Half Rate (FR/EFR/HR).  
Short Message Services. The MultiModem GPRS offers SMS features such as text and PDU, point-to-point  
(MT/MO) and cell broadcast.  
Compatible Supplementary Services. The MultiModem GPRS is compatible with supplementary services  
such as call forwarding, call barring, multiparty, call waiting and call hold, calling line identification, advice of  
charge, USSD, closed user group and explicit call transfer.  
Management Features. The MultiModem GPRS provides advanced management features including phone  
book management, fixed dialing number, and real time clock and alarm management.  
Industry-standard Modem Commands. The MultiModem GPRS provides industry-standard AT-style  
commands for ease of integration into your existing software application.  
Industrial Chassis. The MultiModem GPRS is packaged in a rugged, water resistant, industrial chassis. The  
chassis has a USB connector for power and data. It has an SMA antenna connector. It also has modular  
phone handset receptacle. The chassis can be side-mounted on a panel or top-mounted on a desktop or other  
surface. A set of LEDs indicates the modem’s operational status.  
Packet-Switched Data. The MultiModem GPRS supports GPRS Class 10 packet-switched cellular data. This  
enables mobile Internet functionality by allowing interworking between the existing Internet and the cellular  
network at speeds up to 85K bps. Any service that is used over the fixed Internet today – File Transfer Protocol  
(FTP), web browsing, chat, e-mail, telnet -- is available over the cellular network, as well. The MultiModem  
GPRS supports PBCCH and coding schemes CS1 to CS4, and is compliant with SMG31bis.  
Circuit-Switched Data (CSD). The MultiModem GPRS also supports GSM circuit-switched cellular data  
connections. Circuit-switched data connections support speeds up to 14.4K bps, Class 1 and Class 2 Group 3  
fax, as well as MNP2 V.42bis compression. CSD cellular wireless connections are ideal for applications that  
require a quick wireless replacement of an existing point-to-point analog dial-up connection. They integrate  
seamlessly with your current application requiring little infrastructure change.  
Internet-Enabled. The MultiModem GPRS includes an embedded TCP/IP protocol stack to bring Internet  
connectivity to any device. Using the embedded Internet protocols and the wireless connection to an IP  
network, it sends and receives data over the Internet. It can also serve a single web page in response to a web  
browser request.  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 – Installation  
Safety  
General Safety  
The modem is designed for and intended to be used in fixed and mobile applications. “Fixed” means that the device is  
physically secured at one location and is not able to be easily moved to another location. “Mobile” means that the  
device is designed to be used in other than fixed locations.  
Caution: Maintain a separation distance of at least 20 cm (8 inches) is normally maintained  
between the transmitter’s antenna and the body of the user or nearby persons. The Modem  
is not designed for or intended to be used in portable applications within 20 cm. (8 inches) of  
the body of the user.  
RF Interference Issues  
It is important to follow any special regulations regarding the use of radio equipment due in particular to the possibility  
of radio frequency, RF, interference. Please follow the safety advice given below carefully.  
Switch OFF your Wireless MultiModem when in an aircraft. The use of cellular telephones in an aircraft may  
endanger the operation of the aircraft, disrupt the cellular network and is illegal. Failure to observe this  
instruction may lead to suspension or denial of cellular telephone services to the offender, or legal action or  
both.  
Switch OFF your Wireless MultiModem when around gasoline or diesel-fuel pumps and before filling your  
vehicle with fuel.  
Switch OFF your Wireless MultiModem in hospitals and any other place where medical equipment may be in  
use.  
Respect restrictions on the use of radio equipment in fuel depots, chemical plants or where blasting operations  
are in progress.  
There may be a hazard associated with the operation of your Wireless MultiModem close to inadequately  
protected personal medical devices such as hearing aids and pacemakers. Consult the manufacturers of the  
medical device to determine if it is adequately protected.  
Operation of your Wireless MultiModem close to other electronic equipment may also cause interference if the  
equipment is inadequately protected. Observe any warning signs and manufacturers’ recommendations.  
Vehicle Safety  
Do not use your MultiModem while driving.  
Respect national regulations on the use of cellular telephones in vehicles. Road safety always comes first.  
If incorrectly installed in a vehicle, the operation of Wireless MultiModem telephone could interfere with the  
correct functioning of vehicle electronics. To avoid such problems, be sure that qualified personnel have  
performed the installation. Verification of the protection of vehicle electronics should be part of the installation.  
The use of an alert device to operate a vehicle’s lights or horn on public roads is not permitted.  
Maintenance of Your Modem  
Your Wireless MultiModem is the product of advanced engineering, design and craftsmanship and should be treated  
with care. The suggestions below will help you to enjoy this product for many years.  
Do not expose the Wireless MultiModem to any extreme environment where the temperature is above 50ºC or  
humidity is above 90% noncondensing.  
Do not attempt to disassemble the Wireless MultiModem. There are no user serviceable parts inside.  
Do not expose the Wireless MultiModem to water, rain, or spilled beverages. It is not waterproof.  
Do not place the Wireless MultiModem alongside computer discs, credit or travel cards, or other magnetic  
media. The phone may affect the information contained on discs or cards.  
The use of accessories not authorized by Multi-Tech or not compliant with Multi-Tech's accessory  
specifications may invalidate the warranty of the Wireless MultiModem.  
In the unlikely event of a fault in the Wireless MultiModem, contact Multi-Tech Tech Support.  
Your Responsibility  
This Wireless MultiModem is your responsibility. Please treat it with care respecting all local regulations. It is not a  
toy. Therefore, keep it in a safe place at all times and out of the reach of children.  
Try to remember your Unlock and PIN codes. Become familiar with and use the security features to block  
unauthorized use and theft.  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 – Installation  
Package Contents  
Single Package (one unit)  
Bundled Package (multiple units)  
1 modem  
Each individual package in the bundle includes  
the following:  
1 modem  
1 mounting bracket  
1 USB cable  
1 mounting bracket  
1 Quick Start Guide  
1 MultiModem CD  
1 or 2 antennas  
4 rubber feet  
1 Quick Start Guide  
1 MultiModem CD  
Note: You must supply:  
Screws for the bracket  
An antenna  
Note: You must supply screws for the bracket.  
Part to be Supplied by Your Wireless Service Provider  
Subscriber Identity Module (SIM) configuration chip. The SIM contains information specific to your wireless  
account and its features.  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 – Installation  
Specifications  
General Specifications  
4.3" L x 2.4" W x 0.94" H; 4.2 oz.  
(11 cm x 6.1 cm x 2.4 cm; 119 g)  
Antenna Connection type: SMA jack  
Interface Connector: USB Type B  
Phone Handset: Modular handset jack  
SIM receptacle: Standard 3V SIM receptacle  
-20° to +55°C  
Mechanical Dimensions & Weight  
Connectors & Fasteners  
Operating Temperatures  
Storage Temperatures  
Humidity  
-40° to +85°C  
Relative humidity 20% to 90% noncondensing  
CE Mark  
Certifications  
EMC: FCC Part 2, 15, 22, 24, EN 55022 & EN 55024  
Safety: UL 60950, EN 60950  
Electrical Characteristics  
Switching the GPRS modem on/off  
Voltage  
The device is permanently powered when connected to the USB port.  
Voltage Range: 5 to 32V DC  
GND: 0V  
Current Requirements  
GSM/GPRS 850/900  
GSM/GPRS 1800/1900  
Typ.  
Parameters  
Unit  
Typ.  
Input average supply current in comm. mode at Pmax  
Input average supply current in idle mode  
360  
30  
300  
30  
mA  
mA  
Antenna/RF Specifications  
GSM 850  
869 to 894 MHz  
824 to 849 MHz  
2W at 12.5% duty cycle  
50 ohms  
Frequency RX  
Frequency TX  
RF Power Stand  
Impedance  
<2  
VSWR  
0 dBi on azimuth plane  
Typical Radiated Gain  
GSM 1800  
GSM 1900  
1805 to 1880 MHz  
1710 to 1785 MHz  
1W at 12.5% duty cycle  
50 ohms  
1930 to 1990 MHz  
1850 to 1910 MHz  
1W at 12.5% duty cycle  
Frequency RX  
Frequency TX  
RF Power Stand  
Impedance  
<2  
VSWR  
0 dBi on azimuth plane  
Typical Radiated Gain  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 – Installation  
Interfaces  
The Wireless MultiModem has several interfaces:  
LED function indicating operating status  
External antenna (via SMA connector)  
Serial and control link (via USB connector)  
Microphone and speaker (via handset jack)  
SIM card holder  
LEDs  
LED Indicators  
TD  
RD  
CD  
LS  
Transmit Data. Lit when modem is transmitting data.  
Receive Data. Lit when modem is receiving data.  
Carrier Detect. Lit when data connection has been established.  
Line Status.  
Continuous “on” state indicates that the wireless modem is not registered on the network.  
Flashing state indicates registration on network.  
Off state. Modem is off (not ready) or in download mode.  
TR  
Terminal Ready. Commonly called “Data Terminal Ready.” This is a readiness signal from the PC.  
PWR Power. Indicates presence of DC power when lit.  
AT Command Reference Guides  
AT commands for the GPRS USB wireless modem are published in a separate GPRS AT Commands  
Reference Guide included on the MultiModem CD and posted on the Multi-Tech web site.  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 – Activation and Installation  
Chapter 2 – Activation and  
Installation  
Step 1 – Activate Your Wireless Account  
Multi-Tech – A Certified National Activation Agent  
Multi-Tech Systems, Inc. is a certified national activation agent for Cingular and Sprint wireless. For more  
information about available data plans and to purchase and activate a wireless data account, contact Multi-Tech at  
888-288-5470.  
Pre-Configuration and Activation  
Pre-Configured Multi-Tech Products  
Each Multi-Tech wireless product has been pre-configured to operate on a wireless network.  
Activate Your Wireless Account  
Please see the wireless account Activation Notices located on the MultiModem CD. Choose the one for your  
wireless network provider and follow the directions to activate your account.  
Phone Numbers for the Wireless Modem  
Every wireless modem will have its own unique phone number. The phone number may simply be given to you by  
your wireless service provider or it may be on the SIM card or both. Wireless provider implementations may vary.  
Step 2 – Insert the SIM Card into the Holder  
The wireless MultiModem requires a SIM card (Subscriber Identity Module) to operate on a GSM network. To install  
the card, do the following:  
1. Using your fingernail or a small wedging tool (e.g., a small screwdriver), pry off the SIM cover.  
2. Insert the SIM card into the holder.  
3. Verify that the SIM card fits into the holder properly and then replace the cover.  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 – Using Your Wireless Modem  
Step 3 – Connect the Antenna and USB Cable  
Antenna. Connect a suitable antenna to the SMA connector (See antenna specifications in Chapter 1).  
USB Cable. Connect one end of the USB cable to the modem and the other end to the PC.  
Step 4 – Handset Connection (Optional)  
If you intend to use a phone handset, connect it to the MultiModem now.  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 – Using Your Wireless Modem  
Step 5 – Attach the Modem to a Flat Surface  
(Optional)  
To mount the Wireless MultiModem, do the following:  
1. Obtain mounting screws (two are needed) that are appropriate for the surface on which you will mount  
the MultiModem. For example, one might use two 6-32 self-tapping screws 5/8” in length to mount the  
unit in a truck to the wall of the cab behind the passenger’s seat.  
2. Typically, the unit is mounted against a flat surface into which holes can be drilled. The mounting holes  
(center-to-center) must be separated by 125mm or 4 -15/16 inches.  
Drill the mounting holes at the desired mounting location (if applicable).  
3. Slide the mounting brackets into the corresponding slots on the backside of the MultiModem chassis.  
4. Attach the MultiModem with two screws to the mounting surface at the desired location on the  
equipment.  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 – Using Your Wireless Modem  
Step 6 – Install the Modem Driver  
Introduction  
Compatibility: This wireless MultiModem is compatible with Windows Operating Systems 2000/2003/XP and  
Linux.  
Windows Drivers: The wireless MultiModem USB driver must be installed in your computer’s program directory.  
The procedure differs depending on the operating system and how it is set up. The drivers are located on the  
MultiModem CD.  
Linux Drivers: Linux Operating System drivers are also located on the CD in the Linux directory. Refer to the  
Readme file (also in the Linux directory) for the correct driver file and installation guide for your  
distribution/version of Linux.  
Overview of Windows Driver Installation: Three install wizards guide you through the software Installation in  
this order:  
Part A installs the USB Driver.  
Part B associates the PC port with the USB Driver, and finally  
Part C installs the modem .inf file.  
Installing the Modem Driver in Windows XP/2003  
This installation assumes a Windows XP or Windows 2003 operating system. Windows XP/2003 are identical in  
the methods they use for installing modem drivers.  
Part A for Windows XP/2003: Installing the USB Driver  
1. Connect the USB cable between the MultiModem and the PC.  
2. Insert the MultiModem CD into your CD-ROM drive. The CD uses the Autorun feature, and  
after a brief delay, the MultiModem Setup – Welcome screen appears. Close the Welcome  
screen.  
In some situations the operating system will display a Found New Hardware Wizard screen and  
asks you: Can Windows connect to Windows Update to search for software?  
Select No, not this time. Then click Next.  
3. The Found New Hardware Wizard screen now displays the TUSB3410 Serial Port device. This  
is the first of three New Hardware Wizards that will appear.  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 – Using Your Wireless Modem  
4. Click on Install from a list or specific location (Advanced).  
5. Click Next.  
6. The next screen is the Please choose your search and installation options.  
Ensure that Search for the best driver in these locations with Search removable media  
(floppy, CD-ROM…) is selected.  
Click Next.  
7. A Windows Logo Testing screen may appear. Some operating systems may not give you this  
screen.  
Click Continue Anyway.  
8. At the Completing the Found New Hardware Wizard screen, click Finish. Installation of the  
USB driver is now complete.  
The second Found New Hardware wizard will start automatically to associate the PC port with the USB  
driver.  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 – Using Your Wireless Modem  
Part B for Windows XP/2003: Associating PC Port with USB Driver  
1. If the Welcome to the Found New Hardware Wizard screen – Can Windows connect to  
Windows update to search for software? appeared when you were installing the driver, it will  
come up here also.  
Select No, not this time. Then click Next.  
2. The Welcome to the Found New Hardware Wizard screen will appear with the Texas  
Instruments UMP Serial Port as the device to be installed. This is the beginning of the Found  
New Hardware sequence for the port.  
3. Click Install from a list or specific location (Advanced).  
Click Next.  
4. Please choose your search and installation options screen appears.  
5. Ensure that Search for the best driver in these locations is set and click on Search  
removable media (floppy, CR-ROM…).  
Click Next.  
6. A second Windows Logo Testing screen may appear depending on operating system settings.  
This screen pertains to the MTS GPRS USB – Serial Port.  
Click Continue Anyway.  
7. The Completing the Found New Hardware Wizard screen appears.  
8. The association between the serial port and the USB driver has been made.  
Click Finish.  
The third Found New Hardware wizard will start automatically to install the modem inf file.  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 – Using Your Wireless Modem  
Part C for Windows XP/2003: Installing the Modem INF File  
1. If the Welcome to the Found New Hardware Wizard screen asking – Can Windows connect to  
Windows update to search for software? appears again, select No, not this time. Then click Next.  
2. The Found New Hardware Wizard screen appears for the Multi-Tech – GPRS Modem.  
3. Click on Install from a list or specific location (Advanced).  
Then click Next.  
4. The Please choose your search and installation options screen appears.  
5. Ensure that Search for the best driver in these locations is set and click on Search removable  
media (floppy, CD-ROM).  
Click Next.  
6. In the Please select the best match for your hardware from the list below, select the Multi-Tech  
Systems USB GPRS Wireless Modem Version 6.3.30.6 that is listed in the root of the CD-ROM  
directory.  
Then click Next.  
7. The final Windows Logo Testing screen may appear depending on operating system settings. This  
screen pertains to the creation of a modem entity in the operating system that accommodates the  
wireless USB MultiModem.  
Click Continue Anyway.  
8. The Completing the Found New Hardware Wizard screen appears.  
Click Finish.  
With the modem .inf file successfully installed, the entire software installation procedure for the Wireless  
USB MultiModem is complete.  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 – Using Your Wireless Modem  
Installing the Modem Driver in Windows 2000  
Part A for Windows 2000: Installing the USB Driver  
1. Connect the USB cable between the MultiModem and the PC.  
2. Insert the MultiModem CD into your CD-ROM drive. The CD uses the Autorun feature, and  
after a brief delay, the MultiModem Setup – Welcome screen appears. Close the Welcome  
screen.  
3. After a brief delay, the Welcome to the Found New Hardware Wizard screen appears. This is  
the first of three New Hardware Wizards that will appear.  
Click Next.  
4. The Install Hardware Device Drivers screen appears referring to the TUSB3410 Serial Port  
device.  
5. Click on Search for a suitable driver for my device (recommended)  
Click Next.  
6. The Locate Driver Files screen appears. Click in the Optional search locations: on CD-ROM  
drive option.  
Click Next.  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 – Using Your Wireless Modem  
7. The Driver Files Search Results screen appears. The wizard has found the wrong driver.  
Click on Install one of the other drivers.  
Click Next.  
8. At the Driver Files Found screen, choose the GPRS Device from the listing.  
Click Next.  
9. A Digital Signature Not Found screen may appear depending on operating system settings.  
Click Yes.  
10. At the Completing the Found New Hardware Wizard screen, click Finish.  
Installation of the USB driver is now complete.  
The second Found New Hardware wizard will start automatically to associate the PC port with the USB  
driver.  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 – Using Your Wireless Modem  
Part B for Windows 2000: Associating PC Port with USB Driver  
1. Wait while Windows prepares the next phase of the installation (associating the PC port with  
the USB drive). When the Welcome to the Found New Hardware Wizard screen appears, click  
Next.  
2. The Install Hardware Device Drivers screen appears referring to the Texas Instrument UMP  
Serial Port. This is the beginning of the “Found New Hardware” sequence for the port.  
Click on Search for a suitable driver for my device (recommended).  
Click Next.  
3. The Locate Drivers Files screen appears. Ensure that CD-ROM driver is the only option  
checked.  
Click Next.  
4. The Driver Files Search Results screen appears with the Texas Instruments UMP Serial  
Port device listed with the location of the driver.  
Click Next.  
5. The Completing the Found New Hardware Wizard screen appears. The association  
between the serial port and the USB driver has been made.  
6. Click Finish.  
The third Found New Hardware Wizard will start automatically to install the modem INF file.  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 – Using Your Wireless Modem  
Part C for Windows 2000: Installing the Modem INF File  
1. After a brief delay, the Welcome to the Found New Hardware Wizard screen appears.  
Click Next.  
2. The Install Hardware Device Drivers screen appears, referring to the Multi-Tech GPRS  
modem.  
Click on Search for a suitable driver for my device (recommended).  
Click Next.  
3. The Locate Drivers Files screen appears. Ensure that CD-ROM drive is the only option  
checked.  
Click Next.  
4. The Driver Files Search Results screen appears with the Multi-Tech – GPRS Modem device  
listed with the location of the driver.  
Click Next.  
5. A Digital Signature Not Found screen may appear depending on operating system settings.  
Click Yes.  
6. The Completing the Found New Hardware Wizard screen appears.  
Click Finish.  
With the modem .inf file successfully installed, the entire software installation procedure for the Wireless  
USB MultiModem is complete.  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 – Activation and Installation  
Chapter 3 – Using Your Wireless  
Modem  
Phone Number for the Wireless Modem  
Every wireless modem will have its own unique phone number.  
The wireless modem’s phone number may simply be told to the subscriber or be on the SIM or both.  
Wireless provider implementations may vary.  
Examples of Useful AT Commands  
A Note About HyperTerminal  
In order to verify signal strength and roaming status, you must use a terminal application such as HyperTerminal. To  
open this program in Windows XP, go to Start > All Programs > Accessories > Communications >  
HyperTerminal. Other Windows operating systems have similar paths to HyperTerminal. See your system’s online  
Help if you cannot find it.  
A Note About AT Commands  
AT commands can be used to operate, configure, and query your modem. A reference guide to the GPRS commands  
is included on the MultiModem CD and on the Multi-Tech Web site.  
The following two commands let you query signal strength and roaming status.  
Verifying Signal Strength  
Using HyperTerminal, type AT+CSQ  
The modem responds with the received signal strength (rssi).  
The modem responds with the received signal strength (rssi) and the channel bit error rate (ber).  
RSSI ranges from 0 to 31.  
Signal Strength Verification – RSSI  
21 – 31  
11 - 20  
0 - 10  
99  
Exceptional  
Average  
Weak or Insufficient  
No signal  
BER ranges from 0 to 7 (Seven is the highest error rate).  
Checking Network Registration and Roaming Status  
In this procedure, you will verify that the Wireless MultiModem has been registered on the wireless network.  
Using HyperTerminal, type AT+CREG?  
The modem will respond in one of the following ways:  
Network Registration Verification  
Value  
0,0  
0,1  
Network Registration Status  
The modem is not registered on any network  
The modem is registered on the home network  
The modem is registered on a network and it is roaming  
0,5  
Note: If the modem indicates that it is not registered, verify the signal strength to determine if the problem  
is the strength of the received signal.  
Checking the Modem’s Identity  
Use the ATI command (Note: This command is illustrated using the capital letter i after AT)  
Type ATI0 (Note: The command ends in a zero)  
The manufacturing data displays. For example: Wavecom Modem Multiband G850 1900  
Type ATI3  
The software version displays. For example: 651_09gg...  
Type ATI6  
Displays modem data features. For example: data rates, data modes, fax classes.  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 – Using Your Wireless Modem  
Establishing a Voice Call  
Enter PIN Code (if required by your wireless provider)  
Type AT+CPIN=1234  
Responses:  
OK (PIN Code accepted)  
+CME ERROR : 16 (Incorrect PIN Code)  
+CME ERROR : 3 (PIN already entered [with +CMEE : 1 mode])  
Initiate a voice call  
Type ATD1234; (Note: Don’t forget the semicolon “;” at the end. This stands for voice calls)  
Responses:  
OK (Communication established)  
CME ERROR : 11 (PIN Code not entered [with +CMEE : 1 mode])  
CME ERROR : 3 (Operation not allowed)  
Initiate an emergency call  
Type ATD112; (Note: Don’t forget the semicolon “;” at the end. This stands for voice calls)  
Responses:  
Hang up  
Type ATH  
OK  
Responses:  
OK  
Establishing a Circuit-Switched Data (CSD) Connection  
A Circuit-Switched Data Connection (CDC) makes the wireless modem work similar to a regular analog modem.  
You must have CSD service in order to make a CSD call. Note that your wireless provider charges airtime usage  
for these connections.  
Note: Your cellular provider charges airtime usage for these connections.  
Establish a Connection: Using HyperTerminal or a terminal application, you can establish a CSD  
connection by entering the following command: ATD<phone number>  
Notes:  
The phone number you are calling is entered between the displayed  
brackets. Do not type additional brackets. For example, type only ATD  
8585551212. 8285551212 is typed between the brackets.  
This command tells the modem to inform the wireless network that you are  
initiating a CSD modem call. If you are dialing to another modem, the  
remote modem should answer and a connection between the two modems  
will be established. If you include a semi-colon (;) at the end of the dialing  
string, the modem will instead initiate a Voice call to the phone number  
dialed.  
Disconnect:  
Type: +++  
Wait about two seconds to see an OK response.  
Then type: ATH  
Note: +++ is the escape sequence and ATH is the Hang-up command.  
Answering a Circuit-Switched Data (CSD) Connection  
A Circuit-Switched Data Connection makes the wireless modem work similar to a regular analog modem. You  
must have CSD service in order to answer a CSD call.  
There are three phone numbers for GSM: the voice number, the data number, and the fax number. All are  
provided by the carrier. To answer a call:  
Establish A Connection: Call into the modem by dialing the data number provided by your carrier.  
Answer a Call:  
When you see the RING responses on the terminal screen, enter ATA <cr> to  
answer the call.  
Set Auto-Answer:  
Enter ATS0=x  
This sets the modem to auto-answer. The call will be answered after the number  
of rings entered. x stand for the number rings.  
Then call into the number provided to you by the carrier.  
Disconnect:  
Type: +++  
Wait about one second to see an OK response.  
Then type: ATH  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 – Using Your Wireless Modem  
Using Short Message Services (SMS)  
Send a Short Message to a Specified Number.  
Type AT+CMGS="8585551212" <press Enter>  
Then type your message: Please call me soon. <press ctrl Z>  
The modem may respond with +CMGS:<mr> OK  
Write a Message to Memory.  
You can store a message to send it at a later date.  
Type AT+CMGW="8585551212" <press Enter>  
Type the message. <press ctrl Z>  
The modem may respond with +CMGW: 4 OK (The message is stored in the index as message 4.)  
Send a Message from Storage.  
Type AT+CMSS=x,"8585551212" <press Enter>  
The modem may respond with +CMSS: 1 OK (The transmission is successful. One SMS message is  
sent.)  
Note: The x represents an index location.  
View a List of Stored Messages.  
Type AT+CMGL=x <press Enter>  
For x, substitute one of the following:  
"REC UNREAD" Shows received unread messages.  
"REC READ" Shows received read messages.  
"STO UNSENT" Shows stored unsent messages.  
"STO SENT" Shows stored sent messages.  
"ALL" Shows messages.  
The modem will respond AT+CMGL: 1,"REC UNREAD","8585551212",1...  
The modem will continue until all UNREAD messages, numbers, and index number are listed.  
Read a Stored Message.  
Type AT+CMGR=x <press Enter>  
The modem may respond with +CMGR: "REC READ", "8585551212", ......  
Note: The x represents an index location.  
Delete a Stored Message.  
Type AT+CMGD=x,n <press Enter>  
If you want to delete one message at a time, do not enter a value for n.  
For n, substitute one of the following:  
0 Delete message at location <include the index number>  
1 Delete all READ messages.  
2 Delete all READ and SENT messages.  
3 Delete all READ, SENT, and UNSENT messages.  
4 Delete ALL messages.  
The modem will respond OK.  
Note: The x represents an index location. The n stands for the type of messages to delete.  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 – Using Your Wireless Modem  
SMS Examples  
Send Example  
Send an SMS message to another SMS compatible device  
at+cmgf=1 (set to text mode)  
OK  
at+cpms="SM","SM" (set memory storage when writing and sending SMS messages)  
+CPMS: 0,50,0,50  
OK  
at+cmgs="7632273726" (send message to the number specified in quotes)  
> TEST message ONE. (Type message after the > symbol and hit <CTRL + Z> to send the message)  
+CMGS: 52  
OK  
Receive Examples  
Receive Example 1: Receive SMS messages in text mode by saving to SIM memory – Notification via +CMTI  
unsolicited response code:  
at+cmgf=1 (set to text mode)  
OK  
at+csms=0 (set to Phase 1)  
+CSMS: 1,1,1  
OK  
at+cnmi=2,1,0,0,0 (set to display +CMTI indication when SMS is received)  
OK  
at+cpms="SM","SM" (set the read and write storage of SMS to SIM)  
+CPMS: 0,50,0,50  
OK  
+CMTI: "SM",1 (indication that message was received and stored to SIM location 1)  
at+cmgr=1 (read message stored in location 1)  
+CMGR: "REC UNREAD","+17632273726",,"06/03/17,13:55:22+00"  
TEST1  
OK  
at+cmgd=1 (delete message that is stored in location 1)  
OK  
Receive Example 2: Receive SMS message in text mode by directly routing the received message to the TE  
through the serial port using Phase 2:  
at+cmgf=1 (set to text mode)  
OK  
at+csms=0 (set to Phase 2)  
+CSMS: 1,1,1  
OK  
at+cnmi=2,2,0,0,0 (set to receive SMS and route directly to TE)  
OK  
+CMT: "+17632273726",,"06/03/17,13:59:18+00" (message received and directly routed to TE)  
TEST2  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 – Using Your Wireless Modem  
Receive Example 3: Receive SMS message in text mode by directly routing the received message to the TE  
through the serial port using Phase 2+:  
at+cmgf=1 (set to text mode)  
OK  
at+csms=1 (set to Phase 2+)  
+CSMS: 1,1,1  
OK  
at+cnmi=2,2,0,0,0 (set to receive SMS and route directly to TE)  
OK  
+CMT: "+17632273726",,"06/03/17,14:01:17+00" (message received and directly routed to TE)  
TEST3  
at+cnma (acknowledge that message has been received)  
OK  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 – Using Your Wireless Modem  
Internet Access  
Internet access can be setup in Windows Dial-Up Networking (DUN) of the computer that the wireless modem is  
serving. Setup procedures will vary according to the type of wireless service provider used. To access Dial-Up  
Networking on your PC, go to Start > Settings > Network Connections.  
For GSM-without-GPRS, a circuit-switched data connection is used. The user can set up DUN to  
make a conventional V.32 modem connection to any terminating modem at the other end. The phone  
number specified in DUN can be one supplied by the wireless service provider or another phone  
number related to a different dialup modem service (e.g., a dialup modem service phone number from  
any commercial or private dialup network).  
For GSM-with-GPRS, a single DUN number is generally used by all of a wireless provider’s  
subscribers throughout its area of coverage; regional, nationwide, continental, etc. Rather than being  
a literal phone directory number, as in conventional DUN, this is a code that gives the modem Internet  
access.  
Connecting to the GPRS Network for Internet Access  
After you have inserted the SIM card and the modem is ready for use, you can establish an Internet connection  
through a Windows dial-up session.  
Note that your wireless provider will charge you for data usage.  
Requirements  
One Multi-Tech wireless GPRS modem  
The GPRS modem should have an active SIM card and must have GPRS services  
The modem must be getting a proper signal and be showing a network registration through the wireless  
provider’s network  
A PC running Windows XP or 2003 with the Multi-Tech drivers installed for your particular model  
Notes:  
The following instructions are for Windows XP SP2 and Windows 2003. Every PC may have slight  
differences which may cause the instructions to be different. Use these instructions as a guide to help you  
understand what is required to set up an Internet connection through your wireless service provider for all  
operating systems.  
Cellular providers provide Internet services as part of your service plan. Multi-Tech recommends that if  
you plan on using large amounts of data, to sign up for an unlimited data service plan with your provider.  
Multi-Tech Systems, Inc. will not be responsible for any charges on your cellular bill. If you have any  
questions about billing, service plans, service charges, etc., please contact your provider for more  
information.  
Set the Access Point Name (APN) into the Modem’s Properties on Your PC  
In order for your GPRS wireless modem to connect to your provider’s network, you must tell the modem the  
Access Point Name (APN) to which it will connect. The APN is a server name that your account is setup on  
with your provider. Your APN will be given to you by your provider. Here are some well-known APNs:  
Cingular Wireless: ISP.CINGULAR, or WAP.CINGULAR  
Cingular Wireless (Formerly AT&T): PROXY, or INTERNET, or PUBLIC  
T-Mobile: INTERNET2.VOICESTREAM.COM, or INTERNET3.VOICESTREAM.COM, or  
WAP.VOICESTREAM.COM  
Rogers AT&T of Canada: INTERNET.COM  
Steps for Setting the APN  
1. Start by clicking on Start and then clicking on Control Panel.  
2. In the Control Panel, double-click on Phone and Modem Options.  
3. The Phone and Modem Options window appears. Click on the tab labeled Modems. Highlight the  
Multi-Tech wireless modem listed in the table and then click on Properties.  
4. A Properties window for your modem will display. Click on the Advanced tab and you should see  
an Extra Settings box. In the Extra initialization commands text box, type:  
AT+CGDCONT=1,”IP”,”<APN>”  
For <APN>, type in the correct APN for your account. For example:  
AT+CGDCONT=1,”IP”,”ISP.CINGULAR”  
Click OK to close the modem Properties window. Then click OK to close the Phone and  
Modem Options window.  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 – Using Your Wireless Modem  
Create Your Dial-Up Connection in Windows XP/2003  
1. Click on Start and then click on Control Panel.  
2. In the Control Panel, double-click on Network Connections.  
3. On the Network Connections screen on the left-hand side under Network Tasks, click on Create a new  
connection.  
4. The New Connection Wizard should appear. It will walk you through setting up your Internet connection.  
Click on Next > to begin.  
5. On the Network Connection Type screen, select Connect to the Internet, and then click Next >.  
6. On the Getting Ready screen, select Set up my connection manually, and then click Next >.  
7. On the Internet Connection screen, select Connect using a dial-up modem, and then click Next >.  
Note: After clicking on Next, you may or may not be asked to select which modem to use. If you have  
more than one modem installed in your PC, you will be required to select the proper modem to use. If  
asked, please select the Multi-Tech wireless modem that has been installed.  
8. On the Connection Name screen in the ISP Name box, type in a name for your new connection. You  
can give it any name that you would like. After you have typed in a name, click Next >.  
9. On the Phone Number to Dial screen, type in the number that specifies to the modem to connect to your  
provider’s Internet service.  
For GPRS modems, type in the number *99***1#.  
Then click Next >.  
10. On the Connection Availability screen, specify if this connection is for anyone’s use or for your use only  
by checking the appropriate button. Choose your preference, and then click Next>.  
11. On the Internet Account Information screen, type the user name and the password for your account. In  
many cases, a user name and a password are not required, but some wireless providers require it.  
Check with your provider to see if they are needed.  
Here is some helpful information:  
For Cingular accounts using the ISP.CINGULAR APN:  
User name: [email protected]  
Password: CINGULAR1  
For Cingular accounts using WAP.CINGULAR APN:  
User name: [email protected]  
Password: CINGULAR1  
All other APNs listed on the previous page may not require user names and  
passwords.  
Check the following two options if you would like them activated:  
Check the box if you want this account name and password to be used by everyone.  
Check the box if you want this as your default Internet connection. Then click Next >.  
12. On the Completing the New Connection Wizard screen, you last task is to place a check in the box if  
you would like to add a shortcut to your desktop. Then click Finish.  
13. A Connection screen displays on your desktop. Click the Properties button on the bottom of this  
screen.  
14. The Properties window will open for you to make your connection. Important: Make sure that Use  
dialing rules is not selected, and then click OK.  
15. Once back at your Connection screen, click the Dial button at the bottom of the screen to start the  
connection.  
16. The connection will now tell the modem to connect to your provider’s Internet service. Once connected,  
you should see the connection status icon in your system tray at the bottom right-hand corner of your  
screen.  
You should now be able to open Internet Explorer or any other browser of your preference to surf the  
Internet.  
Disconnecting the Connection:  
1. To disconnect the connection, right click on the connection icon in your system tray at the bottom right-  
hand corner of your screen.  
2. Scroll up and click on Disconnect.  
Your should now be disconnect from the Internet.  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 – Using Your Wireless Modem  
Mobile PhoneTools  
For initial configuration of your wireless device, Multi-Tech offers a Windows® based mobile PhoneTools Mobile  
PhoneTools is a communication software program included on your MultiModem CD. You can install this program  
onto your PC and use it for making Internet connections, voice calls, SMS messaging, and email. This program allows  
you to use your wireless modem hooked up to your PC as if it were a cell phone.  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4 – Troubleshooting and Frequently Asked Questions  
Chapter 4 – Troubleshooting and  
Frequently Asked Questions  
Troubleshooting Examples  
Before calling the Multi-Tech Technical Support, check to the following connections:  
The right antenna is connected to the modem  
The serial cable connection is correct  
The power is connected correctly and the power lights on the modem are on  
Verify your signal strength  
Verify your network registration  
Use the following situation examples to troubleshoot the modem not answering and the modem  
returning a No Carrier message.  
Situation A: The modem does not answer  
If the Wireless MultiModem does not answer through the serial link upon an attempted transmission of data or  
voice signals, see the table below for possible causes and solutions.  
Solutions for ‘no connection through serial link’ situation  
If the  
Then ask …  
Action  
modem  
returns …  
(nothing)  
Is the communication program  
properly configured?  
In communications program, verify that modem  
parameters have been set to the values shown here:  
Data bits = 8  
Parity = none  
Stop Bits = 1  
Baud = 115200 bps  
Is another program interfering  
with the communication  
program?  
Close any such application program.  
Is the modem set to  
autoanswer?  
Type ATS0=1 (to set to auto answer on the first ring)  
Type ATA (to set to manual answer)  
Is the communication program  
receiving RING responses?  
Type ATS0=1 (to set to auto answer on the first ring)  
Type ATA (to set to manual answer)  
Situation B: The modem always returns «No carrier» when trying to originate a call  
Solutions for “no carrier” message  
If the modem  
returns …  
Then ask …  
Action  
no carrier  
Is the selected bearer type Type AT+CEER to view the extended error code (see  
(esp. for data  
communication) party?  
supported by the called  
“Error Results Codes" in the AT Command guide).  
Be sure that the selected bearer type is supported by the  
called party.  
Is the selected bearer type Be sure that the selected bearer type is supported by the  
supported by the network? network.  
If no success, try bearer selection type: AT+CBST=0,0,3  
Be sure SIM card is available for data/fax calls.  
no carrier  
(esp. for voice  
communication)  
Be sure that the semicolon character (“;”) is typed  
immediately after the phone number in the AT command;  
e.g., ATD######;  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4 – Troubleshooting and Frequently Asked Questions  
Frequently Asked Questions  
Which providers can I use?  
Two major providers are T-Mobile and Cingular.  
We are Cingular approved.  
Does this modem support High-Speed Circuit-Switched Data (HSCSD)?  
No, our GSM/GPRS modems do not support HSCSD.  
The modem is answering, but seems to not be doing anything?  
The modem is answering in voice mode.  
If you are trying to make a data call, make sure the account has CSD service. You will also need the data  
number (separate number from the main phone number that is provided by the provider).  
I am trying to make a data connection by dialing from my wireless modem to an analog modem. Why does  
the analog modem answer and send tones, but never connect?  
To make a data call you must use the ATD<number> command.  
Make sure the account has CSD service.  
How do I get the voice portion to work so I can talk to others using the wireless modem?  
You will need a cable that has the speaker pins connected to a speaker and microphone.  
We have a “Y” cable that splits out to a RJ9 connector that can be used to plug into the receiver of a  
handset.  
‘ATD<number>;’ will originate a voice call.  
How do I make an Internet connection to my dial-up ISP?  
Make sure you have CSD service.  
Create a dial-up connection to the ISP’s access number, then use your account username and password  
and choose the wireless modem as the device.  
How does faxing work?  
GPRS modems support Class 1 and Class 2 Group 3 faxing.  
You will need fax services setup on your account. You should receive a separate phone number for fax just  
like voice and data, and you must call the fax number for the modem to receive a fax.  
You will also need fax software (we do not have working software). WinFax Version 10 has been tested with  
success.  
I can’t make outgoing calls. I just receive a NO CARRIER response.  
Make sure the antenna is connected and SIM is inserted correctly.  
Check signal and registration: ‘AT+CSQ’ (10-31 is good), ‘AT+CREG?’ (0,1 is registered & 0,5 is roaming).  
Check NO CARRIER reason with ‘AT+CEER’. Look up error code in Reference Guide.  
The modem will not answer.  
To have modem autoanswer, set modem with ‘ATS0=1’ and ‘AT&W’ to store the setting.  
Send ‘ATA’ to the modem once the RING is indicated on the terminal screen.  
You may need to set modem to ignore DTR, ‘AT&D0’, if you aren’t providing DTR.  
I am trying to make a GPRS connection using a Windows dial-up session. It connects and then immediately  
disconnects.  
Make sure the APN is configured in the modem correctly (The APN is provided by the provider).  
Check the APN with ‘AT+CGDCONT?’ To make sure it is correct.  
If no APN is inserted, then insert the correct APN using the command ‘AT+CGDCONT=1,”IP”,”<APN>”’ with  
HyperTerminal or add it into the “Extra Initialization Commands:” in the modem’s properties.  
Make sure the APN is correct for your account.  
When I try to establish a GPRS connection using Windows dial-up I get an error: “Hardware Failure”.  
Check the modem to make sure it is installed and can be queried in the modem’s properties.  
Make sure the com port is not being held by another application. Look for the TR light indication. If it is on,  
most likely another application is holding onto the port.  
Make sure the dial-up connections maximum speed matches the modem’s properties maximum port speed.  
Try rebooting the PC.  
What is the maximum amount of characters I can use to send an SMS message?  
Supports up to 160 characters maximum.  
In PDU mode using 7-bit, the modem still supports 160 characters, but in 8-bit the modem will support only  
70 characters.  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4 – Troubleshooting and Frequently Asked Questions  
After changing the +CNMI, +CSCA, or +CSMP command values, the modem doesn’t store them.  
When changing these command values, you must use the +CSAS command to store the changes.  
How do I send an SMS message to an email account?  
When sending an SMS message to an email account, you must use a designated routing number that will  
tell the SMS server to route your message to an email account. Here are the numbers that we are aware of  
at this time:  
AT&T = “0000”  
T-Mobile = “500”  
Cingular = “121”  
Here is an example of how to send an SMS message to an email account:  
AT+CMGS=”0000”  
> [email protected] My message goes here. <ctrl +Z>  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5 – Reference Information  
Chapter 5 – Reference Information  
Wireless Modem Reference Information  
GSM reference documents: GSM 03.40, GSM 03.45, GSM 04.11,GSM 04.21, GSM05.08,  
GSM 07.01,GSM 07.02, GSM 07.05, GSM 07.07.  
ETSI contact:  
ETSI Secretariat  
F-06921 Sophia Antipolis Cedex, France  
Service: The AT commands manual is available on the Multi-Tech web site:  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix A – Warranty and Repairs  
Appendix A – Warranty and Repairs  
Multi-Tech Warranty Statement  
Multi-Tech Systems, Inc., (hereafter “MTS”) warrants that its products will be free from defects in material or  
workmanship for a period of two, five, or ten years (depending on model) from date of purchase, or if proof of  
purchase is not provided, two, five, or ten years (depending on model) from date of shipment.  
MTS MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED.  
This warranty does not apply to any products which have been damaged by lightning storms, water, or power surges  
or which have been neglected, altered, abused, used for a purpose other than the one for which they were  
manufactured, repaired by Customer or any party without MTS’s written authorization, or used in any manner  
inconsistent with MTS’s instructions.  
MTS’s entire obligation under this warranty shall be limited (at MTS’s option) to repair or replacement of any products  
which prove to be defective within the warranty period or, at MTS’s option, issuance of a refund of the purchase price.  
Defective products must be returned by Customer to MTS’s factory — transportation prepaid.  
MTS WILL NOT BE LIABLE FOR CONSEQUENTIAL DAMAGES, AND UNDER NO CIRCUMSTANCES WILL ITS  
LIABILITY EXCEED THE PRICE FOR DEFECTIVE PRODUCTS.  
Repair Procedures for U.S. and Canadian Customers  
In the event that service is required, products may be shipped, freight prepaid, to our Mounds View, Minnesota  
factory:  
Multi-Tech Systems, Inc.  
2205 Woodale Drive  
Mounds View, MN 55112 U.S.A.  
Attn: Repairs, Serial # ____________  
A Returned Materials Authorization (RMA) is not required. Return shipping charges (surface) will be paid by MTS to  
destinations in U.S. and Canada.  
Please include, inside the shipping box, a description of the problem, a return shipping address (must have street  
address, not P.O. Box), and your telephone number. If the product is out of warranty, a payment in advance is  
required. Acceptable means of payment include credit card, wire transfer or a check in U.S. dollars drawn on a U.S.  
bank.  
For out of warranty repair charges, go to www.multitech.com/COMPANY/Policies/warranty/  
Extended two-year overnight replacement service agreements are available for selected products. Please call MTS  
customer service at (888) 288-5470 or visit our web site at  
Please direct your questions regarding technical matters, product configuration, verification that the product is  
defective, etc., to our Technical Support department at (800) 972-2439 or email [email protected]. Please  
direct your questions regarding repair expediting, receiving, shipping, billing, etc., to our Repair Accounting  
department at (800) 328-9717 or (763) 717-5631, or email [email protected].  
Repairs for damages caused by lightning storms, water, power surges, incorrect installation, physical abuse, or user-  
caused damages are billed on a time-plus-materials basis.  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix A – Warranty and Repairs  
Repair Procedures for International Customers  
(Outside U.S.A. and Canada)  
Your original point-of-purchase Reseller may offer the quickest and most economical repair option for your Multi-Tech  
product. You may also contact any Multi-Tech sales office for information about the nearest distributor or other repair  
service for your Multi-Tech product. The Multi-Tech sales office directory is available at  
In the event that factory service is required, products may be shipped, freight prepaid to our Mounds View, Minnesota  
factory. Recommended international shipment methods are via Federal Express, UPS or DHL courier services, or by  
airmail parcel post; shipments made by any other method will be refused. Please include, inside the shipping box, a  
description of the problem, a return shipping address (must have street address, not P.O. Box), and your telephone  
number. If the product is out of warranty, a payment in advance is required. Acceptable means of payment include  
credit card, wire transfer or a check in U.S. dollars drawn on a U.S. Bank. Repaired units shall be shipped freight  
collect, unless other arrangements are made in advance.  
Please direct your questions regarding technical matters, product configuration, verification that the product is  
defective, etc., to our Technical Support department nearest you or email [email protected]. When calling the  
U.S., please direct your questions regarding repair expediting, receiving, shipping, billing, etc., to our Repair  
Accounting department at +(763) 717-5631 in the U.S.A., or email [email protected].  
Repairs for damages caused by lightning storms, water, power surges, incorrect installation, physical abuse, or user-  
caused damages are billed on a time-plus-materials basis.  
Repair Procedures for International Distributors  
International distributors should contact their MTS International sales representative for information about the repair of  
Multi-Tech product(s).  
Please direct your questions regarding technical matters, product configuration, verification that the product is  
defective, etc., to our International Technical Support department at +(763)717-5863. When calling the U.S., please  
direct your questions regarding repair expediting, receiving, shipping, billing, etc., to our Repair Accounting  
department at +(763) 717-5631 in the U.S.A. or email [email protected].  
Repairs for damages caused by lightning storms, water, power surges, incorrect installation, physical abuse, or user-  
caused damages are billed on a time-plus-materials basis.  
Replacement Parts  
SupplyNet, Inc., can supply you with replacement power supplies, cables and connectors for selected Multi-Tech  
products. You can place an order with SupplyNet via mail, phone, fax or the Internet at the following addresses:  
Mail:  
SupplyNet, Inc.  
614 Corporate Way  
Valley Cottage, NY 10989  
800 826-0279  
Phone:  
Fax:  
914 267-2420  
Email:  
Internet:  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B – WEEE Statement  
Appendix B - Waste Electrical and  
Electronic Equipment (WEEE)  
Statement  
July, 2005  
The WEEE directive places an obligation on EU-based manufacturers, distributors, retailers and importers to take-  
back electronics products at the end of their useful life. A sister Directive, ROHS (Restriction of Hazardous  
Substances) complements the WEEE Directive by banning the presence of specific hazardous substances in the  
products at the design phase. The WEEE Directive covers all Multi-Tech products imported into the EU as of August  
13, 2005. EU-based manufacturers, distributors, retailers and importers are obliged to finance the costs of recovery  
from municipal collection points, reuse, and recycling of specified percentages per the WEEE requirements.  
Instructions for Disposal of WEEE by Users in the European Union  
The symbol shown below is on the product or on its packaging, which indicates that this product must not be disposed  
of with other waste. Instead, it is the user’s responsibility to dispose of their waste equipment by handing it over to a  
designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and  
recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is  
recycled in a manner that protects human health and the environment. For more information about where you can  
drop off your waste equipment for recycling, please contact your local city office, your household waste disposal  
service or where you purchased the product.  
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miller Electric Welding System Belt Hydraulic Driven Generator User Manual
MTD Snow Blower 313 205 User Manual
MTD Tiller 219 200 User Manual
NeumannBerlin Microphone KM 53 User Manual
Nexstar Digital Photo Frame N3 511 User Manual
Niles Audio Headphones CORAL RS6 User Manual
Novatel Radio Antenna SMART V1 User Manual
Omega Weather Radio DP26 TC User Manual
Oricom Cordless Telephone P900 User Manual
Panasonic MP3 Player CQ C300U User Manual