Miele Washer W2444WPS User Manual
Operating instructions  
for Washing machine  
W 2444 WPS  
To avoid the risk of accidents or  
damage to the machine it is  
essential to read these instructions  
before it is installed or used for the  
first time.  
G
M.-Nr. 06 068 940  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Caring for our environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Disposal of the packing material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Disposal of your old machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Warning and safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Description of the machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Special programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Delicates and Silks /programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Water plus system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Time left display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Locking functions (programme locking, system lock) . . . . . . . . . . . . . . . . . . . 10  
Future updates (PC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Important control panel features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Programme selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Additional option buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
"Spin" button with indicator lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Washing environmentally and economically. . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Energy and water consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Additional options (Soak, Pre-wash, Intensive) . . . . . . . . . . . . . . . . . . . . . . . . 15  
When drying with a tumble dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
How to wash correctly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Brief instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Programme chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Before washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Selecting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Additional options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
At the end of a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Adding or removing laundry after a programme has started . . . . . . . . . . . . . . . . 26  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Interrupting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Altering a programme once selected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Skipping a programme stage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
To cancel or select a different programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Water softeners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Washing with several components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Fabric conditioners and liquid starch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Automatic dispensing of fabric conditioner or liquid starch to laundry  
at the end of a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Adding fabric conditioner separately . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Adding starch separately . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Colour run and dye removers/dyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Locking functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Electronic programme locking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Electronic system lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
E-Cloth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Extra cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Cleaning the detergent dispenser drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Cleaning the filter in the water inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Problem solving guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
The programme does not start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
The wash programme stops and a fault indicator light comes on. . . . . . . . . . . . . 38  
A fault indicator light comes on but the wash programme continues as normal. . 39  
General problems or an unsatisfactory wash result . . . . . . . . . . . . . . . . . . . . . . . 40  
The drum door does not open when you press the Door button. . . . . . . . . . . . . . 42  
Opening the drum door in the event of a blocked drain outlet and/  
or power failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Blocked drain outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Opening the drum door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
Customer contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Installation and connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Front view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Installation surface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
Installing the washing machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
Removing the transit fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
Re-fitting the transit bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50  
Levelling the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
Screwing out and adjusting the feet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
Building under a continuous worktop/in a kitchen run . . . . . . . . . . . . . . . . . . . 52  
Washer and Dryer stack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52  
The Miele Waterproof system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
Connection to the water supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Connection to the drainage system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Electrical connection U.K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
Consumption data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
Note for test institutes: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Programmable functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
Water plus system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
Gentle action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64  
Top-up rinse for Cottons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65  
Memory Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66  
Soak. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and safety instructions  
load) match the mains electricity  
supply. If in any doubt, consult a  
qualified electrician.  
To avoid the risk of accidents and  
damage to the machine please read  
these instructions carefully before  
using it for the first time. They  
contain important information on its  
safety, use and maintenance.  
Keep these operating instructions in  
a safe place and ensure that new  
users are familiar with the content.  
Pass them on to any future owner of  
the machine.  
The electrical safety of this  
machine can only be guaranteed  
when continuity is complete between  
the machine and an effective earthing  
system which complies with local and  
national regulations. It is most important  
that this basic safety requirement is  
present and regularly tested and where  
there is any doubt the household wiring  
system should be inspected by a  
qualified electrician.  
Correct usage  
The manufacturer cannot be held liable  
for the consequences of an inadequate  
earthing system (e.g. electric shock).  
Only use the washing machine to  
wash items which are specified by  
the manufacturer to be machine-wash-  
able on the wash-care label, and tex-  
tiles composed of hand-washable wool  
or wool blend fabrics as well as satin,  
lace, silk and other hand-washable  
garments.  
Any other applications may be danger-  
ous. The manufacturer is not liable for  
damage resulting from improper use or  
operation.  
Do not connect the machine to the  
mains electricity supply by an  
extension lead. Extension leads do not  
guarantee the required safety of the  
machine (e.g. danger of overheating).  
The machine is built in accordance  
with current safety requirements.  
Unauthorised repairs could result in  
unforeseen dangers for the user, for  
which the manufacturer cannot accept  
liability. Repairs should only be  
undertaken by a Miele approved  
technician.  
This machine is not a toy! To avoid  
the risk of injury do not allow  
children to play on or near it or to  
play with the controls. Supervise its  
use by the elderly or infirm.  
Ensure current is not supplied to the  
appliance until after maintenance or  
repair work has been carried out.  
Technical safety  
The machine is only completely  
isolated from the electricity supply  
when:  
Before setting up the machine,  
check it for any externally visible  
damage. Do not install and use a  
damaged machine.  
– it is switched off at the wall socket  
and the plug is withdrawn, or  
Before connecting the machine,  
ensure that the connection data on  
the data plate (voltage and connected  
– it is switched off at the mains, or  
– the mains fuse is withdrawn.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and safety instructions  
The Miele "Water protection  
system" protects from water  
damage provided the following  
conditions have been met:  
Do not install your washing  
machine in rooms where  
temperatures below freezing may  
occur. Frozen hoses may burst under  
pressure. The reliability of the electronic  
control unit may be impaired at  
temperatures below freezing point.  
– the machine is correctly plumbed in  
and connected to the electricity  
supply.  
Before using the machine for the  
first time, check that the transit  
fitting at the rear of the machine has  
been removed (see section on  
"Installation"). During spinning, a transit  
fitting which is still in place may result in  
damage to both the machine and  
adjacent furniture or appliances.  
– if a fault has been identified, the  
machine must be examined by a  
competent person before further use,  
and repaired if necessary.  
Faulty components must only be  
replaced by genuine Miele original  
spare parts. Only when these parts are  
fitted can the safety standards of the  
machine be guaranteed.  
Turn off the stopcock if the  
machine is to be left for any length  
of time (e.g. holiday), especially if there  
is no floor drain (gully) in the immediate  
vicinity.  
If the connection cable is faulty it  
must only be replaced by a Miele  
approved service technician to protect  
the user from danger.  
Flooding danger  
In countries where there are areas  
If hooking the drain hose into a  
which may be subject to infestation wash basin, check that the water can  
by cockroaches or other vermin, pay  
particular attention to keeping the  
machine and its surroundings in a  
clean condition at all times. Any  
damage which may be caused by  
drain off quickly enough to prevent the  
sink from overflowing.  
Make sure the drain hose is secure, so  
that the force of the water flowing out of  
the hose does not dislodge it.  
cockroaches or other vermin will not be Otherwise this will result in flooding.  
covered by the machine guarantee.  
Take care to ensure that foreign  
objects (e.g. nails, pins, coins,  
paper clips) do not find their way into  
Use  
the machine with the laundry. These  
may damage components of the  
machine (e.g. suds container, drum),  
which in turn can result in damage to  
the laundry.  
This equipment may only be used  
in mobile installations such as  
ships, caravans, aircraft etc. if a risk  
assessment of the installation has been  
carried out by a suitably qualified  
engineer.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and safety instructions  
If the correct amount of detergent  
is dispensed, the machine should  
not need to be descaled. If, however,  
you do wish to descale the machine  
only use proprietary non-corrosive  
descaling agents and strictly observe  
the instructions on the packaging. If in  
doubt, contact the Miele Customer Ser-  
vice Dept. or your Miele Dealer.  
Safety with children  
This machine is not a toy! To avoid  
the risk of injury do not allow  
children to play on or near it or to play  
with the controls. Supervise its use by  
the elderly or infirm, and supervise  
children whilst you are operating the  
machine.  
For machines with a ‘porthole’  
door, remember that the porthole  
glass will be hot when washing at very  
high temperatures. Do not let children  
touch it.  
Textiles which have been pre-  
treated in solvent based cleaning  
agents must be thoroughly rinsed in  
clean water before being washed in the  
machine.  
Never use solvent based cleaning  
agents in this machine, as this may  
result in damage to component parts  
and create toxic fumes. Such  
detergents also pose a fire and  
explosion hazard.  
Accessories  
Accessory parts may only be fitted  
when expressly approved by Miele.  
If other parts are used, guarantee,  
performance and product liability  
claims will be invalidated.  
Only use dyes specified by the  
manufacturer as being suitable for  
use in a domestic washing machine.  
Always observe the manufacturer's  
instructions carefully.  
Disposal of your old machine  
Before discarding an old machine,  
switch it off at the wall socket and  
unplug it. Render the plug useless. Cut  
off the cable directly behind the  
appliance to prevent misuse. This  
should be done by a competent  
person.  
Colour run and dye removers  
contain sulphur compounds which  
can cause damage such as corrosion.  
Do not use these products in this  
machine.  
The manufacturer cannot be held  
liable for damage caused by non-  
compliance with these Warning and  
Safety instructions.  
Always make sure the drum is  
stationary before reaching in to  
remove washing. Reaching into a  
moving drum is extremely dangerous.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the machine  
Your machine also has the following  
special programmes in addition to the  
standard Cottons and Minimum iron  
programmes.  
Delicates and Silks /programmes  
In these programmes, the laundry is  
washed and spun very gently to reduce  
creasing and the amount of ironing  
required, thus providing "Easy care" for  
your laundry.  
Special programmes  
– Silks /  
Water plus system  
Hand-washable fabrics which crease  
easily and do not contain wool can  
be washed in the Silks /  
The water level for washing and/or  
rinsing is increased. For Cottons and  
Minimum iron programmes an  
programme (30°C temperature only).  
additional rinse can also be selected.  
– Woollens /  
Hand-washable or machine-  
washable wool or wool blend fabrics  
can be washed in the Woollens /  
programme. If the garment care label  
does not specify a temperature,  
wash using the cold setting.  
– Quick wash  
This is a Cottons programme for  
small loads of very lightly soiled  
fabrics.  
– Automatic  
Suitable for small loads of garments  
made from man-made fibres and  
cotton garments which can be  
washed together. Sort according to  
colour.  
– Separate rinse  
Suitable for rinsing and spinning  
articles which have been hand  
washed.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the machine  
Time left display  
Future updates (PC)  
After the start of a programme, the  
The indicator or check light marked PC  
duration of the programme selected will is the interface used by Miele service  
be shown in the display counting down  
in hours and minutes and finally in  
minutes. At some points during the  
wash, the time shown can change. This  
is normal.  
technicians during servicing work for  
testing purposes and for updating the  
machine's programme data.  
Locking functions (programme lock-  
ing, system lock)  
Electronic programme locking  
Electronic programme locking prevents  
the door from being opened or the  
programme cancelled during a wash  
programme. The electronic programme  
locking is automatically cancelled at the  
end of the programme.  
Electronic system lock  
The system lock prevents anyone from  
using the washing machine without  
your knowledge. When the system lock  
is activated :  
– the drum door cannot be opened  
with the Door button and  
– a programme cannot be started.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the machine  
Control panel  
aDisplay  
fProgramme selector  
See the following page for more  
information.  
For selecting the wash programme  
and temperature for that programme.  
The programme selector can be  
turned clockwise or anti-clockwise  
bStart button  
Starts the wash programme  
gProgramme sequence indicator  
lights  
cAdditional option buttons  
Additional options can be added to  
the basic programme.  
Show which section of the wash  
programme has been reached  
Use the top button to select either  
the Intensive, Pre-wash, or Soak  
option or a combination of these  
options.  
Use the lower button to select the  
Water plus option.  
hCheck lights  
iI-On/0-Off button  
For switching the machine on or off  
or interrupting a programme  
jDoor button  
Indicator light on = option selected  
Indicator light off = option not  
selected  
Opens the machine door  
dIndicator lights for spin speed,  
Rinse hold or Without spin  
eSpin button  
For selecting the final spin speed,  
Rinse hold or Without spin  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the machine  
Programme duration  
After a programme has started, the  
maximum programme duration (wash  
time) will appear in the display in hours  
and minutes.  
In the Cottons, Minimum iron and Auto-  
matic programmes, the machine  
measures the amount of water  
absorbed by the laundry and uses this  
to calculate the load during the first 10  
minutes. If the machine recognises a  
smaller load it will shorten the  
programme time.  
Programme  
Max. time reduction  
normal  
37 mins  
12 mins  
13 mins  
intensive  
52 mins  
13 mins  
18 mins  
Cottons  
Minimum iron  
Automatic  
Soak  
If the Soak additional option has been  
selected, the soak time is added to the  
programme duration in the display to  
give a total running time.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the machine  
Important control panel  
features  
Wash programme  
Cottons  
rpm  
1600  
900  
Programme selector  
Minimum iron  
Delicates  
Silks  
600  
The programme selector is used to set  
the basic wash programme and the  
temperature for that programme.  
400  
Woollens  
Quick wash  
Automatic  
Separate rinse  
Starch  
1200  
1600  
900  
The light ring will go out a few minutes  
after the end of the programme to save  
energy.  
1200  
1600  
1600  
Additional option buttons  
Drain/spin  
Additional options can be added to the  
basic programme.  
You can also omit the final spin  
^ Press the "Spin" button to reach:  
– Rinse hold  
Use the top button to select either the  
Intensive, the Pre-wash or the Soak  
option or a combination of these  
options.  
The laundry is not spun and remains  
suspended in the final rinse water.  
This reduces creasing if the laundry  
is not going to be removed from the  
drum immediately after the end of  
the programme.  
To continue the programme select a  
spin speed. When the programme is  
finished the Anti-crease/Finish light  
will come on. Turn the programme  
selector to the Finish position and  
press the door button to open the  
door and remove the laundry.  
Use the lower button to select the Water  
plus option.  
The indicator light will come on to show  
that the additional option has been  
selected. If an additional option is  
chosen, which is incompatible with the  
basic programme, it cannot be  
selected.  
"Spin" button with indicator lights  
Select the spin speed.  
– Without spin  
Press the "Spin" button to select a  
different spin speed. You cannot select  
a spin speed higher than the maximum  
allowed for the basic wash programme  
chosen.  
The laundry is not spun. After the  
water has been drained away the  
machine goes straight into the anti-  
crease stage. Spinning between the  
rinses is also omitted in this setting.  
The indicator lights show the speed  
selected.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
Before using the machine for the first  
time ensure that it is correctly  
installed and connected. See the  
relevant section under "Installation".  
Also check that the fluff filter is  
securely tightened. Otherwise there  
is a risk of water leakage during use.  
For safety reasons spinning is not  
possible until the machine has been  
prepared for using for the first time. To  
activate the spinning function you must  
run a wash programme without laundry  
and without detergent.  
Using detergent could result in an  
excessive build-up of foam.  
This also activates the ball valve. The  
ball valve prevents detergent escaping  
from the suds container into the sump  
during a wash programme, thus making  
maximum use of the detergent.  
^ Open the stopcock.  
^ Press the I-On/0-Off button in.  
^ Turn the programme selector to  
Cottons 40°C.  
^ Press Start.  
When this programme has finished turn  
the programme selector to Finish. Your  
washing machine is ready for using for  
the first time.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing environmentally and economically  
Energy and water consumption  
Detergent  
– Water consumption and energy  
usage are determined by the size of  
the load.  
– Do not exceed the amount of  
detergent recommended by the  
manufacturer on the packaging.  
– Use the Automatic or the Quick wash – Reduce the amount of detergent with  
programme for smaller amounts of  
laundry.  
smaller loads (approx. 1/3 less than  
the amount recommended can be  
used when washing a half load).  
– When smaller amounts of laundry are  
washed in the Cottons programmes,  
the automatic load recognition  
system will reduce the amount of  
water, time and energy used. This  
may mean that the programme  
duration alters during the course of  
the wash programme.  
Additional options (Soak, Pre-  
wash, Intensive)  
Select:  
A wash programme without any  
additional options for light to normal  
soiling where there are no obvious  
marks.  
– Instead of the Cottons 95°C  
programme, use the Cottons 60°C  
programme together with the  
Intensive additional option. This will  
give an energy saving of between  
35% and 45%. The programme  
duration will be longer. This  
A wash programme together with the  
Intensive option for normal to heavily  
soiled laundry with visible staining.  
– Use the additional option Soak  
instead of Pre-wash. If Soak is  
followed immediately by a main wash  
the same suds are used.  
combination is sufficient for most  
levels of soiling. For stubborn or old  
stains, use the Soak option.  
When drying with a tumble dryer  
– Selecting the highest possible spin  
speed for the wash programme will  
save energy when drying in a tumble  
dryer afterwards.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to wash correctly  
Brief instructions  
See the "Programme chart" in the next  
section for information on which  
programmes to use for different fabric  
types.  
Please note:  
To help familiarise yourself with how to  
use your washing machine please read  
the sections "Before washing",  
"Selecting a programme" and "At the  
end of a programme" in detail.  
ASort the laundry into colours and  
fabric types  
Selecting a programme:  
BSwitch on the washing machine  
COpen the drum door  
DLoad the drum  
EClose the drum door  
FSelect a programme  
GSelect a spin speed  
HSelect any additional option required  
IAdd detergent  
JPress the Start button  
At the end of a programme:  
KOpen the drum door  
LRemove the laundry  
MSwitch off the washing machine  
NTurn the programme selector to the  
Finish position  
OClose the drum door  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to wash correctly  
Programme chart  
Cottons 30°C to 95°C 9ö876  
Fabric  
Cottons and linen fabrics, e.g. bed linen, table linen,  
towelling, jeans, underwear, T-shirts, nappies.  
Additional options Soak, Pre-wash, Intensive, Water plus  
Notes  
– Only use the Cottons 95°C programme for heavily soiled  
laundry.  
– For heavy soiling or where staining is visible, use the  
Intensive additional option.  
– For laundry with stubborn soiling or soiling which has  
been left untreated for a while, select both the Intensive  
and Soak options.  
– For laundry with large amounts of dirt (e.g. dust, sand)  
use the Pre-wash additional option.  
– For dark coloured fabrics use a detergent for coloured  
fabrics, or liquid detergent.  
Detergent  
Max. load  
Powder detergent, detergent for coloured fabrics, liquid  
detergent, tablet detergent and liquid tab detergent.  
5 kg  
Note for test institutes:  
For testing in accordance with EN 60456 you must use the Intensive option.  
Minimum iron 30°C to 60°C 4321 876  
Fabric  
For garments made of synthetic fibres, mixed fibres and for  
easy care cotton shirts and blouses.  
Additional options Soak, Pre-wash, Intensive, Water plus  
Notes  
– For heavy soiling or where staining is visible, use the  
Intensive additional option.  
Detergent  
Powder detergent, detergent for coloured fabrics, liquid  
detergent, detergent for delicates, tablet detergent and liquid  
tab detergent.  
Max. load  
2.5 kg  
Note for test institutes:  
For testing in accordance with EN 60456 you must use the Intensive option.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to wash correctly  
Delicates cold to 40°C 21  
Fabric  
For delicate garments made of synthetic fibres, mixed fibres  
and easy care cotton shirts and blouses.  
Curtains, including net curtains, specified as machine-  
washable by the manufacturer.  
Additional options Soak, Pre-wash, Intensive  
Notes  
– For heavy soiling or where staining is visible, use the  
Intensive additional option.  
– Laundry remains relatively crease-free for easier ironing.  
– Dust in curtains usually makes using a programme with  
Pre-wash advisable.  
– For curtains made from delicate fabrics, reduce the spin  
speed or select Without spin.  
Detergent  
Liquid detergent for delicates.  
1 kg  
Max. load  
Silks 30°C /c  
Fabric  
Hand-washable fabrics with no wool content, e.g. satin, lace  
and silk.  
Additional option  
Notes  
Water plus  
– Laundry remains relatively crease-free for easier ironing.  
– Place socks, tights, bras etc. in a washing bag.  
Liquid detergent for delicates.  
Detergent  
Max. load  
1 kg  
Woollens cold to 40°C /ac  
Fabric  
Machine-washable or hand-washable wool or wool blend  
fabrics. If the care label does not specify a temperature  
wash using the cold setting.  
Notes  
– Please note that hand-washable garments will not shrink,  
stretch, matt or felt beyond the accepted tolerance of the  
item.  
– During the final spin the 1300 rpm indicator light will  
come on. However, to protect the laundry, the machine  
will only spin at 1200 rpm during this spin.  
Detergent  
Max. load  
Liquid detergent for machine washable woollens.  
2 kg  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to wash correctly  
Quick wash 40°C 7  
Fabric  
Very lightly soiled fabrics, which can be washed in the  
Cottons programme.  
Additional option  
Notes  
Water plus  
– Use less detergent (as for a half load).  
– If fabrics have a high proportion of man-made fibres it is  
advisable to programme the machine for "Gentle Action".  
See "Programmable functions". Note that this programme  
is not suitable for delicate items.  
Detergent  
Max. load  
Powder detergent, detergent for coloured fabrics, liquid  
detergent.  
2.5 kg  
Automatic 40°C 72  
Fabric Small loads of garments made from man-made fibres and  
cotton garments which can be washed together. Sort  
according to colour.  
Additional options Soak, Pre-wash, Intensive, Water plus  
Notes  
– For heavy soiling or where staining is visible, use the  
Intensive additional option.  
Detergent  
Powder detergent, detergent for coloured fabrics, liquid  
detergent.  
Max. load  
Starch  
Fabric  
3 kg  
Table cloths, napkins, overalls, aprons.  
Notes  
– The laundry should be washed but not treated with fabric  
conditioner.  
Max. load  
Separate rinse  
Fabric  
5 kg  
Articles which have been washed by hand and only need to  
be rinsed and spun in the machine.  
Notes  
During the final spin the 1300 rpm indicator light will come  
on. However, to protect the laundry, the machine will only  
spin at 1200 rpm during this spin.  
Max. load  
Drain/Spin  
Notes  
5 kg  
– Drain only: Select Without spin. Do not use for Woollens.  
Max. load  
5 kg  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Garment care label symbols  
/
Hand wash (If no temperature  
is specified use the lowest  
temperature or cold)  
h
Do not wash  
apf Dry clean  
D
y
Do not dry clean  
Suitable for chlorine  
bleaching  
z
Do not use chlorine bleach  
Tumble dry  
q
r
s
At normal temperature  
At low temperature  
Do not tumble dry  
Ironing  
I
H
G
J
Hot iron  
Medium hot iron  
Cool iron  
Do not iron  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Garment care label symbols  
Before washing  
,Do not use solvent-based  
ASort the laundry  
cleaning agents in this machine.  
^ Sort the laundry by colour and by  
care label symbol. Most garments  
have a textile care label in the collar  
or side seam.  
Dark textiles often contain excess dye  
and should be washed separately  
several times before being washed  
together with other garments. Always  
wash whites and coloureds separately.  
Delicate textiles should be washed  
separately in a delicates programme  
(use a washing bag where  
appropriate).  
^ Empty all pockets.  
– Curtains:  
,Foreign objects (e.g. nails,  
coins, paper clips, etc.) can cause  
damage to garments and  
Remove lead weights and strips or  
place in a laundry bag.  
components in the machine.  
– Underwiring and collar stiffeners:  
Any loose wiring in bras, shirt collar  
stiffeners, etc. should be removed or  
sewn in.  
^ Badly soiled areas, e.g. collars and  
cuffs, and water soluble stains can  
be pre-treated with bar soap, liquid  
detergent or detergent mixed into a  
solution or paste.  
– Knitted garments, trousers and  
jeans, T-shirts and sweat shirts:  
Turn inside out, if recommended by  
the manufacturer.  
With particularly stubborn stains ask  
your dry cleaner for advice.  
– Close any zips, fasten hooks and  
eyes etc before washing.  
– Fasten duvet covers to prevent  
smaller items rolling up inside them.  
,Do not wash any items in this  
machine which are specified by the  
manufacturer as not washable on  
the care label. (hsymbol)  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Garment care label symbols  
Selecting a programme  
BSwitch on the washing machine  
^ Press in the I-On/0-Off button.  
COpen the drum door  
FSelect a programme  
^ Press the Door button and open the  
drum door.  
DLoad the drum  
^ Unfold the laundry and load loosely  
in the drum. To achieve best results it  
is advisable to make up mixed loads  
consisting of both large and small  
items. This improves the washing  
effect and helps distribute the load  
evenly to keep the machine stable  
and reduce the noise level during  
spinning.  
^ Turn the programme selector to the  
required programme.  
The maximum duration for the  
programme will appear in the display.  
GSelect a spin speed  
To save energy and water try to load  
the maximum amount for the  
programme selected.  
However, be careful not to overload the  
machine. Overloading reduces the  
wash result and causes more creasing.  
EClose the drum door with a gentle  
swing  
Make sure that no garments are caught  
between the drum door and seal.  
^ Press the "Spin" button repeatedly  
until the indicator light for the spin  
speed you want comes on.  
In some programmes the maximum  
spin speed is limited. The machine will  
not allow a higher spin speed to be  
selected.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Garment care label symbols  
Additional options  
Pre-wash  
HSelect additional option(s)  
For heavily soiled laundry and items  
with dried on stains.  
Additional options can be selected as  
long as they are compatible with the  
basic programme being used.  
Soak  
Each press of the top button selects the  
additional option in the following order:  
Intensive or Intensive and Pre-wash or  
Intensive and Soak or Pre-wash or Soak  
or no option selected.  
For heavily soiled and stained items  
with protein stains (e.g. blood, fats  
and oils, cocoa).  
– A length of time of between 30  
minutes and 2 hours can be  
programmed in 30 minute  
Use the lower button to select or  
deselect the Water plus option.  
increments for the soak process.  
– The machine is set ex-works with a  
soak period of 2 hours.  
To programme in a different soak period  
see "Programmable functions - Soak  
period".  
Water plus  
If you want to increase the water level  
for a wash process you can choose one  
of four options for the Water plus  
button. See "Programmable functions -  
Water plus system".  
^ Press the appropriate additional  
option button. Press the top button  
repeatedly until the indicator light for  
the additional option you want comes  
on.  
The machine is set at the factory so that  
the water level in the main wash and  
rinses will be increased if the Water  
plus button is pressed.  
Intensive  
For normal to heavy soiling with  
visible staining.  
The duration of the main wash is  
increased.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Garment care label symbols  
IAdding detergent  
It is important to dispense the correct  
amount, because. . .  
. . . too little detergent results in:  
– Laundry not getting properly clean  
and with time it may become grey  
and hard to the touch.  
– Greasy particles cling to the laundry.  
– Limescale deposits on the heater  
elements.  
. . . too much detergent results in:  
^ Pull out the detergent drawer and  
place detergent in the compartments  
as follows:  
– Excessive foam, which causes a low  
level of agitation and poor wash,  
rinse and spin results.  
i = Pre-wash  
– higher water consumption because  
an extra rinse is automatically  
activated  
(if selected, add 1/4 of the  
total amount recommended for  
the programme). This compart-  
ment is also used for starch  
formulations when starching  
separately.  
– A burden to the environment.  
j = Main wash  
including the Soak period if  
selected  
§
= Fabric conditioner or  
liquid starch.  
^ Close the detergent drawer.  
See section on "Detergent" for further  
information on detergent and the  
amount to dispense.  
JPress the Start button  
This starts the programme. The  
maximum programme duration will then  
show in the display.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Garment care label symbols  
At the end of a programme  
Check that all items have been  
removed from the drum. Items left in  
the drum could discolour other items  
in the next wash or become  
When the Anti-crease/Finish indicator  
light comes on the laundry can be  
removed from the drum. (This light  
stays on at the end of the programme  
and remains on until the selector is  
turned back to the Finish position).  
discoloured themselves.  
MSwitch off the washing machine.  
KOpen the drum door  
^ Press the Door button.  
LRemove the laundry.  
^ Press and release the I-On/0-Off  
button and turn the programme  
selector to Finish. The Anti-crease/  
Finish light will then go out.  
,Only remove laundry from the  
machine once the drum has  
stopped turning. Reaching into a  
moving drum is extremely  
NClose the drum door  
Otherwise there is the danger of  
objects being placed inadvertently in  
the drum. If these remained unnoticed  
and were washed in the next load, they  
could damage the laundry.  
dangerous and could result in injury.  
^ Check the folds in the door seal for  
any small articles, e.g. buttons which  
may be lodged there.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Garment care label symbols  
Adding or removing laundry  
after a programme has started  
The door cannot be opened, if:  
– the suds temperature is above 55°C.  
– the water is above a certain level.  
– programme locking is switched on.  
Laundry can be added or removed  
after the programme has started when  
using the following programmes:  
– the programme has reached the  
Final spin stage.  
– Cottons  
– Minimum iron  
– Quick wash  
– Automatic  
– Starch  
The Locked check light will come on if  
the Door button is pressed when the  
above conditions are present.  
^ Press the Door button in and hold it  
until the door springs open.  
^ Add or remove items.  
^ Close the door.  
The programme will continue  
automatically.  
Please note:  
Once a programme has started the  
machine cannot recognise any  
adjustment to the load. For this reason  
if laundry is added or removed after the  
start of a programme, the machine will  
always complete the programme cycle  
assuming a full load which can lead to  
an increase in the time remaining for  
the programme shown in the display.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Garment care label symbols  
Interrupting a programme  
Skipping a programme stage  
^ Switch the machine off with the  
I-On/0-Off button.  
^ Turn the programme selector to  
Finish.  
To continue with the same programme:  
As soon as the programme sequence  
indicator light for the programme stage  
you want the programme to continue at  
starts flashing:  
^ Switch the machine on with the  
I-On/0-Off button.  
^ Turn the programme selector back  
again to the appropriate programme  
within 4 seconds.  
Altering a programme once  
selected  
The machine will accept the following  
changes after a programme has  
started:  
Programmes cannot be altered and  
programme stages cannot be  
skipped if programme locking has  
been activated.  
– at any time after the start, the spin  
speed can be changed within the  
limits for the programme.  
To cancel or select a different  
programme  
– up to 6 minutes after the start, the  
Water plus additional option can be  
selected or de-selected and a  
different temperature can be  
^ Switch the machine off with the  
I-On/0-Off button.  
selected for the programme in use.  
^ Turn the programme selector to  
After the start of a programme it is no  
longer possible to select a different  
programme.  
Finish.  
The programme has now been  
cancelled.  
If the programme selector is moved, the  
indicator light Anti-crease/Finish will  
start flashing. However, the programme  
sequence remains unaffected. The  
indicator light will go out again when  
the programme selector is moved back  
to the programme previously chosen.  
^ Switch the machine on with the  
I-On/0-Off button.  
^ Select a different programme.  
^ Press the Start button.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Garment care label symbols  
Programme sequence  
Main wash  
Rinses  
Spinning  
Water  
level  
Wash  
rhythm  
Water  
level  
No of Rinse and Final spin  
rinses  
interim  
spin  
Cottons  
d
d
e
(
(
d
d
–
a
a
b
d
c
a
a
–
(
e
e
(
(
(
e
d
e
2-31)  
2-33)  
L2)  
L2)  
–
L
L
L
L
L
L
L
L
L
Minimum iron  
Delicates  
Silks  
3
2
2
2
2
1
2
–
Woollens  
Quick wash  
Automatic  
Starch  
L2)  
L2)  
L2)  
–
Separate rinse  
–
–
–
d = Low water level  
( = Medium water level  
e = High water level  
a= Normal wash rhythm  
b= Gentle action  
c= Woollens  
d= Silks  
Please continue reading for further details about the programme sequences.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Garment care label symbols  
This washing machine has fully  
Special features in the programme  
sequences:  
electronic controls with automatic load  
recognition. This machine takes in the  
right amount of water required for the  
programme depending on the amount  
Anti-crease:  
At the end of every programme, with  
of laundry and its absorbency rate. This the exception of the Woollens  
means that programme cycles and  
durations shown in the display can  
vary.  
programme, the anti-crease action  
switches on for a maximum of 30  
minutes. The door can be opened and  
laundry removed at any time during the  
anti-crease phase.  
The programme sequences outlined  
below are based on the basic  
programme with a full load. Additional  
options which can be selected have not  
been taken into account.  
1)  
A third rinse takes place  
automatically if:  
– there is too much foam in the drum  
The programme sequence indicator  
lights show the stage the programme  
has reached.  
– a spin speed of lower than 700 rpm  
has been selected.  
– Without spin has been selected  
2)  
Rinse and interim spin:  
There is a spin between the rinses.  
3)  
A third rinse takes place  
automatically if:  
– Without spin has been selected  
Omitting rinse and interim spin:  
Select Without spin.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Detergent  
All modern detergents produced for  
automatic washing machines are  
suitable, including liquid, compact  
(concentrated), tablets, liquid tablets  
and special application detergents.  
Use dispensing aids, e.g. balls, if these  
are supplied with the detergent. Tablets  
are suitable for full loads but note that it  
may be impractical to reduce tablets for  
smaller loads. Some tablets do not  
dissolve as rapidly as others and may  
not be suitable for Quick wash  
The right amount to dispense will  
depend on the following:  
– The quantity of laundry.  
– The soiling level of the laundry.  
Lightly soiled  
No visible dirt or stains. Possibly  
slight body odour.  
Normally soiled  
Visibly dirty and/or just a few slight  
stains.  
Heavily soiled  
Stains and soiling clearly visible.  
– The water hardness level.  
Check with your local water supplier  
if you do not know the water  
hardness level in your area.  
programmes.  
Woollens and knitwear containing wool  
mixtures and hand-washable garments  
should be washed using a detergent  
specifically designed for washing  
woollens.  
Water softeners  
Silk should be washed using a liquid  
detergent specifically designed for  
washing woollens. Do not use  
biological detergents on silk as the  
enzymes may damage the silk!  
A water softener can be used to cut  
down on the use of detergents in  
extremely hard water areas. Dispense  
according to the amount specified on  
the packaging. First add detergent and  
then the water softener.  
Use a quantity of detergent as for soft  
water.  
Miele do not recommend connecting  
the machine to a household water  
softener.  
Instructions for use and recommended  
amounts for a full load are given on the  
detergent packaging.  
Liquid detergent  
Liquid detergent should be dispensed  
using a ball provided by the manufac-  
turer for programmes without a pre-  
wash.  
Washing with several  
components  
If you wash using several components  
(e.g. special application detergents),  
dispense them into compartment jin  
the following order:  
For programmes with a pre-wash you  
will need to purchase a special con-  
tainer from the Miele Spare Parts de-  
partment which sits in the main wash  
compartment jof the detergent dis-  
penser drawer. Add liquid detergent to  
this container for the main wash and to  
compartment ifor the pre-wash.  
1. Detergent  
2. Water softener  
3. Stain remover  
This way the agents are distributed  
more efficiently.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Detergent  
Fabric conditioners and liquid  
starch  
If starching frequently, the dispenser  
compartment and especially the  
siphon tube and conditioner channel  
will need regular cleaning to remove  
any residual starch. See "Cleaning  
the detergent dispenser drawer".  
Do not add starch formulations or  
viscous liquid starch to the §  
Fabric conditioners make garments soft  
to handle and help prevent static cling  
when tumble drying.  
Starch stiffens and gives body to items  
of laundry, e.g. shirts, tablecloths and  
bed linen.  
compartment as it will clog it up. See  
"Adding starch separately".  
^ Dispense according to the amount  
specified on the packaging.  
Adding fabric conditioner separately  
Automatic dispensing of fabric  
conditioner or liquid starch to  
laundry at the end of a programme  
^ Add fabric conditioner to  
compartment §.  
^ Turn the programme selector to Starch.  
^ Select a spin speed.  
^ Press the Start button.  
Adding starch separately  
Use the separate Starch programme  
when using starch formulations or  
viscous liquid starch.  
^ Prepare and measure the starch in  
accordance with the manufacturer’s  
instructions.  
^ Add starch to compartment i.  
^ Turn the programme selector to Starch.  
^ Select a spin speed.  
^ Press the Start button.  
Colour run and dye removers/  
dyes  
^ Add the fabric conditioner or liquid  
starch to compartment §. Do not  
exceed the maximum level mark.  
^ Do not use colour run or dye  
removers in this washing machine.  
^ Dyes suitable for use in domestic  
washing machines can be used.  
However, please note that the salt  
used in the dyeing process can  
cause corrosion to stainless steel  
components in the machine if you  
dye frequently. Always observe the  
manufacturer's instructions carefully.  
The conditioner or liquid starch is  
automatically dispensed in the last  
rinse. At the end of the programme a  
small amount of water remains in the  
fabric conditioner compartment §.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Locking functions  
Electronic programme locking  
Deactivating programme locking  
early  
Programme locking prevents the  
machine from being opened or the  
programme cancelled during a wash  
programme.  
^ Press the Start button for at least 4  
seconds until the Locked check light  
(lower right on the control panel)  
goes out.  
To activate programme locking  
Exception:  
^ After the start of a programme, press  
the Start button for at least 4 seconds  
until the Locked check light (lower  
right on the control panel) comes on.  
If the programme selector has been  
moved and the Anti-crease/Finish  
indicator light is flashing in the  
sequence display.  
Programme locking is now activated.  
^ First, turn the programme selector  
back to the programme chosen  
previously. The Anti-crease/Finish  
indicator light will go out.  
The machine will now not accept any  
changes and the programme will  
proceed through to the end. The door is  
locked when programme locking is  
activated.  
^ Now press the Start button for at least  
4 seconds until the Locked check  
light (lower right on the control panel)  
goes out  
Programme locking is deactivated  
automatically at the end of the  
programme.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Locking functions  
Electronic system lock  
ENext slowly turn the programme  
selector anti-clockwise stage by  
stage to Delicates cold.  
The system lock prevents your  
machine being used without your  
knowledge.  
The Locked check light (lower right  
on the control panel) will flash.  
FNow release the Intensive, Pre-wash  
When the system lock has been  
activated:  
or Soak button.  
GTurn the programme selector to  
– The drum door cannot be opened  
with the Door button and  
Finish.  
HSwitch the washing machine off with  
– A programme cannot be started.  
the I-On/0-Off button.  
To activate the system lock  
First, ensure that:  
To de-activate the system lock  
Repeat steps A to G. The locked  
check light goes out.  
– The drum door is closed  
– The programme selector is at Finish.  
ASwitch on the washing machine with  
the I-On/0-Off button.  
BPress the Intensive, Pre-wash or  
Soak button and keep it pressed in  
while carrying out steps C to E.  
CSlowly turn the programme selector  
clockwise stage by stage to -  
Cottons 60°C.  
DNow slowly turn the programme  
selector anti-clockwise stage by  
stage to Finish.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Extra cleaning  
,Disconnect the machine from the  
mains electricity supply and  
withdraw the plug from the socket  
prior to cleaning the machine.  
Carry out a hot wash (70°C or above)  
with powder detergent approx. every 6  
weeks to help prevent deposits building  
up in the machine. These can occur  
when washing is mainly done at low  
temperatures, and also lead to  
unpleasant smells. If you have no  
reason to wash occasionally at this high  
temperature, then run a Cottons 95°C  
programme with detergent but no  
laundry at regular intervals.  
^ Clean the casing with a mild non-  
abrasive detergent or soap and  
water. Wipe dry with a soft cloth.  
^ Clean the fascia panel with a damp  
cloth and wipe dry with a soft cloth.  
^ The drum can be cleaned using a  
suitable proprietary stainless-steel  
cleaning agent following the  
manufacturer's instructions on the  
packaging.  
,Do not use solvents, abrasive  
cleaners, glass cleaners or all-  
purpose cleaning agents. These  
might damage plastic surfaces and  
other components because of the  
chemicals they contain.  
The washing machine must not be  
hosed down.  
E-Cloth  
A microfibre "E-Cloth" is available from  
the Miele UK Spare Parts Department,  
Part number 98013530, which is  
suitable for cleaning surfaces such as  
stainless steel, glass, plastic and  
chrome without the use of chemicals. It  
can be washed 300 times.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Cleaning the detergent dispenser  
drawer  
Remove detergent residues regularly.  
^ Clean the siphon.  
1. Remove the siphon from  
compartment §. Wash under  
running warm water. Clean the  
siphon tube in the same way.  
^ Pull out the detergent dispenser  
drawer until a resistance is felt. Press  
down the release catch and at the  
same time pull the drawer right out of  
the machine.  
2. Replace the siphon.  
Over time, detergent residue can build  
up in the water jets in the top of the  
detergent drawer housing.  
^ Clean the detergent drawer with  
warm water.  
^ Before replacing the detergent  
drawer, use a bottle brush or similar  
to clean them out.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Cleaning the filter in the water  
inlet  
^ First turn off the stopcock.  
^ Unscrew the threaded union  
connecting the free end of the inlet  
hose to the stopcock.  
The washing machine has a filter to  
protect the water inlet valve.  
The accessible filter in the union in the  
open end of the inlet hose should be  
checked every six months, or more  
often if there are frequent interruptions  
to the external water supply.  
^ Remove the rubber seal 1 from the  
recess.  
^ Using pointed pliers, take hold of the  
plastic filter bar 2 and remove.  
^ Clean the plastic filter.  
^ Put the filter and seal back in the  
reverse order and reconnect the  
hose.  
Turn on the stopcock and check the  
connection is watertight. If water drips  
out, tighten the connection.  
Never forget to put the filter back in  
place after cleaning.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
With the help of the following notes minor faults in the performance of the  
appliance, some of which may result from incorrect operation, can be put right  
without contacting the Service Department.  
,Repair work to electrical appliances should only be carried out by a  
suitably qualified person in accordance with local and national safety  
regulations. Repairs and other work by unqualified persons could be  
dangerous. The manufacturer cannot be held liable for unauthorised work.  
The programme does not start.  
Problem  
Possible cause  
Remedy  
Check that  
The Anti-crease/Finish There is no power.  
indicator light is not on,  
or the Start indicator  
– the mains plug is  
plugged in and switched  
on.  
light is not flashing.  
– the fuse or circuit breaker  
has not tripped.  
– the drum door is properly  
shut.  
The Locked check light The system lock has  
Deactivate the system lock.  
is flashing.  
been activated.  
The programme does  
The washing machine  
Prepare the machine as  
not start when Drain/  
has not been prepared described in "Before using  
Spin has been selected. for using for the first  
for the first time".  
time.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
The wash programme stops and a fault indicator light comes  
on.  
Problem  
Possible cause  
Remedy A  
The Check drain light  
flashes. "– – –" appears blocked.  
in the display.  
The water outlet is  
Clean the fluff filter and the  
drain pump as described in  
"Problem solving guide -  
Opening the drum door in the  
event of a blocked drain outlet  
and/or power failure".  
The drain hose has The maximum drain height is  
been fixed too high. 1 m.  
The Check inlet light  
The water inlet is  
Open the stopcock.  
flashes. "– – –" appears blocked.  
in the display.  
The filter in the water Clean the filter.  
inlet hose is dirty.  
The Check inlet and  
Check drain lights are  
flashing. "– – –" appears  
in the display.  
The water protection Call the Service Department.  
system has reacted.  
The Soak/Pre-wash or  
Rinses indicator light is  
flashing. "– – –" appears  
in the display.  
There is a fault.  
Start the programme again.  
If the fault indicator occurs  
again, contact the Service  
Department.  
ATo switch off the fault indicator: switch the washing machine off with the  
I-On/0-Off button and turn the programme selector to Finish.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
A fault indicator light comes on but the wash programme  
continues as normal.  
Problem  
Possible cause  
Remedy A  
The Check drain light The drain outlet is Clean the drain filter and the drain  
flashes.  
restricted.  
pump as described in "Problem  
solving guide - Opening the drum  
door in the event of a blocked  
drain outlet and/or power failure".  
The Check inlet light  
The water inlet is Check whether  
flashes.  
restricted.  
– the stopcock is opened wide  
enough.  
– the inlet hose is kinked.  
The filter in the  
water inlet hose is  
dirty.  
Clean the filter.  
The Excess detergent Excessive foam  
check light comes on. has built up  
during washing.  
Use less detergent next time and  
follow the manufacturer’s  
instructions on dosage given on  
the packaging.  
The Main wash  
indicator light is  
flashing.  
There is a fault.  
Start the programme again.  
If the fault indicator occurs again,  
contact the Service Department.  
The Anti-crease/Finish The position of the programme selector was altered  
indicator light is  
flashing.  
after the start of the programme. Turn the programme  
selector back to the programme previously chosen.  
ATo switch off the fault indicator: switch the washing machine off with the  
I-On/0-Off button and turn the programme selector to Finish.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
General problems or an unsatisfactory wash result  
Problem  
Possible cause  
Remedy  
The machine shakes  
during the spin cycle. resting evenly on the  
The four feet are not  
Level the machine. See  
installation.  
floor.  
The laundry has not  
been spun  
The spin speed  
selected was too low. next time.  
Select a higher spin speed  
satisfactorily.  
The pump makes  
strange noises.  
These do not indicate a fault. They occur at the end of  
a pump sequence as a normal part of the operation.  
The programme  
selector light ring is  
not lit up.  
The machine has switched off the light ring to save  
energy. To switch the light ring back on again: press  
one of the additional option buttons or turn the  
programme selector.  
Large residues of  
The water supply  
– Clean the filter in the water  
detergent remain in  
the dispenser drawer.  
pressure is too low.  
inlet system.  
– It may be useful to press the  
Water plus button.  
Washing powder used Pour washing powder into the  
with water softener  
tends to become  
sticky.  
dispenser before adding any  
water softener.  
Fabric conditioner is  
not completely  
The siphon is either  
incorrectly positioned "Cleaning and care - Cleaning  
Clean the siphon, see  
dispensed or too  
or clogged.  
the detergent drawer".  
much water remains  
in the §compartment.  
When laundry is dry it Too vigorous wash  
Programme in gentle action  
and more water.  
feels hard to the  
touch.  
action.  
Not enough detergent Increase detergent dose to  
used.  
prevent limescale build up in  
laundry.  
No fabric conditioner  
used.  
Use fabric conditioner in last  
rinse.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
Problem  
Possible cause  
Remedy  
Liquid detergent Liquid detergents do – Use a general purpose washing  
does not give the not contain bleaching  
machine powder containing a  
bleaching agent.  
– Pour stain removers into compart-  
ment jof the dispenser drawer  
and liquid detergent into a  
dispenser ball.  
required result.  
agents. They do not  
remove fruit, coffee  
and tea stains.  
– Never put stain removers and  
liquid detergent together in the  
dispenser drawer.  
Grey, greasy  
Insufficient amounts of – Add more detergent.  
particles cling to detergent were used  
washed laundry. to break down the  
particles of grease in  
– Before washing the next load run a  
Cottons 95°C programme with  
powder detergent but without a  
load.  
heavily soiled laundry.  
A stale smell is in Low temperature  
the drum and on washing.  
laundry.  
Before washing the next load run a  
Cottons 95°C programme with  
powder detergent but without a load.  
There are white The detergent  
– Try and brush off the residues with  
a soft brush once the laundry is  
dry.  
residues which  
contained compounds  
look like powder (zeolites) to aid water  
detergent on  
dark coloured  
laundry.  
softening which are not  
soluble in water. These  
have ended up on the  
laundry.  
– Use a liquid detergent to wash dark  
coloured textiles. Liquid detergents  
usually contain no zeolites.  
Machine is  
Machine connected to Connect machine to mains water and  
constantly over- a water softener.  
dose detergent for hard water.  
foaming/excess  
detergent light is  
on.  
Too much detergent  
was used.  
Reduce detergent.  
Too little detergent  
was used.  
Increase detergent slightly to bring  
back foam suppressant ingredients.  
Clothes are  
coming out  
creased.  
Programme was  
overloaded.  
Reduce quantity of clothes in drum.  
The wrong  
– Check care labels with section  
programme was used.  
"How to wash correctly".  
– Use easy iron conditioners.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
The drum door does not open when you press the Door button.  
Possible cause  
Remedy  
The machine is not  
connected to the  
electricity supply.  
Put the plug in the socket and switch on.  
The washing machine is  
not switched on.  
Switch the machine on with the I-On/0-Off button.  
This is automatically deactivated at the end of a  
The electronic  
programme lock has been programme. To deactivate it early see "Locking  
activated.  
functions".  
The electronic system  
lock has been activated.  
To deactivate it see "Locking functions".  
Power cut.  
Open the drum door as described in the section  
"Opening the drum door in the event of a blocked  
drain outlet and/or power failure".  
The door was not  
correctly engaged.  
Press hard against the lock side of the drum door  
and then press the Door button.  
There is still water in the Clean the fluff (drain) filter and the drain pump.  
drum and the machine is  
unable to drain.  
For safety reasons the drum door cannot be opened if the suds temperature is  
higher than 55°C.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
Opening the drum door in the  
event of a blocked drain outlet  
and/or power failure  
Blocked drain outlet  
If the drain outlet is blocked, up to  
25 litres of water will be retained in the  
machine.  
^ Switch the washing machine off.  
There is a lever behind the detergent  
drawer fascia panel.  
,Caution: if laundry has been  
washed at a high temperature, water  
draining out of the machine will still  
be hot. Danger of scalding!  
Procedure for draining the machine  
^ Place a suitable container under the  
access flap.  
When draining water from the  
machine, do not unscrew the drain  
filter completely or take it right out.  
^ Remove the lever.  
^ Unscrew the drain filter lid until water  
runs out.  
To interrupt the flow of water:  
^ Tighten the drain filter back up again.  
^ Use it to open the access flap.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
Once the flow of water ceases:  
,Make sure the drain filter is  
securely tightened. Otherwise there  
is a risk of water leakage during use.  
Opening the drum door  
,Always make sure that the drum  
is stationary before reaching into the  
machine to remove laundry.  
Reaching into a moving drum is  
extremely dangerous.  
^ Remove the drain filter completely.  
^ Clean it thoroughly.  
^ Pull the emergency release  
downwards (see illustration). The  
drum door will open.  
^ Remove any foreign objects (e.g.  
buttons, coins, etc.) and fluff from the  
filter housing. Turn the impeller by  
hand to check that it rotates freely.  
Any foreign object causing an  
obstruction should be removed.  
^ Put the drain filter back in place and  
secure.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
Customer contact  
Optional accessories  
In the event of any faults which you  
cannot remedy yourself please contact  
Optional accessories for this washing  
machine are available from your Miele  
Dealer or from the Miele Spare Parts  
Department.  
– Your Miele dealer or  
– Your nearest Miele Service  
Department (see back cover for the  
address).  
Please note that telephone calls may  
be monitored and recorded to  
improve our service.  
When contacting your Dealer or the  
Service Department, please quote the  
model and serial number of your  
appliance, both of which are shown on  
the data plate visible at the top inside of  
the door above the porthole glass when  
the door is open.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and connection  
Front view  
aInlet hose with "Waterproof" system  
hDetergent dispenser drawer  
bElectricity supply cable  
iDrum door  
c - f Flexible drain hose (with  
jAccess to drain filter, drain pump  
detachable swivel elbow)  
and emergency release  
gFacia panel with controls  
kHandle recesses for moving the  
machine  
lFour height adjustable feet  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and connection  
Rear view  
aProtruding edge for holding when  
eTransit bar covers  
fRestraining clip for:  
– Inlet hose  
moving the machine  
bElectricity supply cable  
cInlet hose with "Waterproof" system  
dDrainage hose  
– Drain hose  
– Electricity supply cable  
– Transit bars when removed  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and connection  
Installation surface  
Installing the washing machine  
A concrete floor is the most suitable  
installation surface for a washing  
machine, being far less prone to  
vibration during the spin cycle than  
wooden floorboards or a carpeted  
surface.  
To manoeuvre the machine out of its  
packing case to its installation site hold  
it by the edge of the lid where it  
protrudes to the rear of the washing  
machine as well as by the handle  
recesses at the front.  
Please note the following points:  
Please note:  
^ The machine must be level and  
securely positioned.  
^ Do not lift the machine by the drum  
door.  
^ To avoid vibrations during spinning,  
the machine should not be installed  
on soft floor coverings.  
,Ensure that the machine feet and  
the floor are dry to prevent the  
machine from slipping during the  
spin cycle.  
If installing on a wooden joist floor:  
^ We recommend a plywood base  
(at least 59x52x3 cm). The base  
should span several joists and be  
bolted to the joists and not only to the  
floorboards. Check for the presence  
of pipes and cables.  
Removing the transit fittings  
If possible, install the machine in a  
corner, as this is usually the most stable  
part of the floor.  
,If the machine is installed on a  
raised plinth, it has to be secured  
against slippage during spinning  
using retaining clips (available from  
the Miele Spare Parts Dept).  
^ To remove the left and right covers  
1. Use a screwdriver to prise out the  
cover as illustrated.  
2. Pull the cover forwards to remove.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and connection  
^ Using the spanner supplied turn the  
left-hand transit bar 90°, then  
^ Turn the right-hand transit bar 90°,  
then  
^ withdraw the transit bar.  
^ withdraw the transit bar.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and connection  
,The washing machine must not  
be moved without the transit bars in  
place.  
Store the transit bars as shown or  
keep them in a safe place for future  
use. They must be re-fitted if the  
machine is to be moved again  
(e.g.when moving house).  
Re-fitting the transit bars  
Re-fitting is carried out by reversing the  
procedure.  
^ Fit the covers on to the two holes.  
Then plug the holes as shown with  
the caps.  
^ Secure the transit bars to the back of  
the washing machine. Make sure that  
holes b are fitted over retainers a.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and connection  
Levelling the machine  
The machine must stand perfectly level  
on all four feet to ensure safe and  
proper operation.  
^ Using the spanner supplied turn  
counter nut 2 in a clockwise  
direction. Then turn counter nut 2  
together with foot 1 to unscrew.  
^ Use a spirit level to check the  
machine is standing level.  
Incorrect installation may increase  
electricity and water consumption and  
may cause the machine to move about.  
^ Hold foot 1 securely with a pipe  
wrench. Turn counter nut 2 again  
using the spanner supplied until it  
sits firmly up against the housing.  
Screwing out and adjusting the feet  
The four adjustable screw feet are used  
to level the machine. All four feet are  
screwed in when the machine is  
delivered.  
,All four counternuts must be  
firmly up against the housing. Please  
also check this for the feet which did  
not need adjustment. Otherwise  
there is the danger of the machine  
moving about.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and connection  
Washer and Dryer stack  
The fitting of building under kits and  
stacking kits must only be  
undertaken by qualified and  
competent persons, in accordance  
with the instructions supplied with  
the kit.  
A Miele tumble dryer can be stacked  
with the washing machine. A "WTV"  
stacking kit* is necessary and can be  
purchased from the Miele Spare Parts  
Department.  
Please note  
Building under a continuous  
worktop/in a kitchen run  
– A special building under conversion  
kit* is required.  
The machine lid must be replaced by  
a cover plate. To ensure electrical  
safety the cover plate must be fitted.  
N.B.  
If you wish to push your machine under  
a worktop and there is space to do this  
without removing the lid, the  
conversion kit is not necessary.  
Otherwise the conversion kit is  
essential.  
– For installation under a work surface  
900/910 mm from the floor, a raising  
kit* is required.  
a Safety distance to wall:  
at least 2 cm  
– Connections for electricity, water and  
drainage should be installed in such  
a way that they remain accessible  
when the machine is in place.  
b Height:  
Stacking kit with pull-out shelf:  
approx. 169 cm  
Stacking kit without pull-out shelf:  
approx. 170 cm  
Fitting instructions are supplied with the  
conversion kit.  
All parts marked* are available from the  
Miele Spare Parts or Sales Department.  
Replacing the lid  
If the lid has been removed in order to  
fit a stacking kit or cover plate, ensure  
that, if the lid is replaced, it fits securely  
into the rear holders. Otherwise, it is not  
properly secure for transport.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and connection  
The Miele Waterproof system  
2) Electronic unit and washing  
machine housing  
The Miele Waterproof system protects  
the washing machine from water  
damage.  
– Sump  
Any leaking water is collected in a  
sump in the base of the machine. A  
float switches off the safety valves,  
preventing any more water from  
flowing into the machine and water in  
the suds container is pumped away.  
The system consists of three main  
components:  
1) the inlet hose  
2) the electronic unit and the washing  
machine housing  
– Overflow protection  
3) the drain hose  
This prevents the washing machine  
taking in too much water. If the water  
level exceeds a certain level, the  
drain pump switches in and pumps  
the excess water away.  
1) Inlet hose  
– The inlet hose is fitted with an  
additional electrical safety valve  
which works like an automatic  
stopcock and is housed in the inlet  
hose connection box.  
3) Drain hose  
The drain hose is protected by a  
ventilation system which prevents the  
washing machine from being  
emptied completely.  
– It is pressure tested to between  
7,000 and 10,000 kPa.  
– The inlet hose has a protective  
sleeve.  
Any leaking water from the inlet hose  
is fed into the sump through this  
protective sleeve. A float switches off  
the safety valve, preventing any more  
water from flowing into the machine  
and water in the suds container is  
pumped away.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and connection  
Connection to the water supply  
The plastic casing of the safety valve contains electrical components. The  
Waterproof system must only be connected to its own stopcock. It must not be  
connected to mixer taps or similar and must not be fitted in areas where there is  
the risk of water or other liquids reaching it.  
The protective sleeve of the hose  
must not be damaged or kinked.  
Do not get wet.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and connection  
The machine should be connected to a Maintenance and care  
mains water supply in accordance with  
local and national safety regulations.  
The German authorities do not require it  
to have a non-return valve as the  
washing machine has been designed  
to comply with DIN regulations.  
If you intend to unscrew the Miele  
Waterproof system hose from the  
stopcock it is essential to disconnect  
the machine from the electricity supply  
first.  
Only use a Miele Waterproof system  
hose should you need a replacement.  
The machine is designed to operate  
with a flow pressure of between 100  
and 1,000 kPa. If it is higher than  
1,000 kPa it is essential to fit a reducer  
valve.  
In order to protect the water inlet  
valve, the dirt filter in the water inlet  
valve connection must not be  
removed.  
Connection to the mains water supply  
should incorporate a mains stopcock  
with 3/4" thread. The stopcock should  
be fitted by a qualified plumber.  
Extension hose  
A 1.5 metre long (metal) extension hose  
is available from your Miele dealer or  
the Miele Spare Parts Department as an  
optional extra.  
,The connection point is subject  
to mains water pressure. Turn on the  
stopcock slowly and check for leaks.  
Correct the position of the washer  
and union if appropriate.  
This hose is tested to withstand  
pressures of up to 14,000 kPa and can  
be used as a flexible extension to the  
water supply.  
The washing machine is not suitable  
for connection to a hot water supply  
and connection to a household  
N.B. Using this hose renders the  
Waterproof system safety valve on the  
inlet hose ineffective.  
water softener is not recommended.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and connection  
Connection to the drainage  
system  
Drain hose connection:  
1. Direct into a sink or basin:  
Please note the following  
The machine drains via a drain pump  
with a delivery head of 1 metre*.  
– Hook the hose over the edge and  
secure.  
The drain hose must not be kinked as  
this restricts drainage. The swivel elbow  
at the end of the hose can be turned in  
either direction, or can be detached if  
required, with a sharp twist and pull.  
– Make sure that the water can drain  
away freely without hindrance.  
Otherwise there is a risk of water  
overflowing or of some of the drained  
water being sucked back into the  
machine.  
If required, the drain hose can be  
extended to a length of 5 m. The  
necessary parts can be purchased  
from the Miele Spare Parts Department  
or your Miele dealer.  
2. Connected securely to a plastic drain  
pipe with a rubber nipple. There is no  
need to use a non-return valve.  
* For a delivery head of more than 1 m  
(up to a maximum of 1.8 m) a second  
duo-drain pump is available with the  
corresponding kit from the Miele Spare  
Parts Department or your Miele Dealer.  
3. Connected securely to a standpipe.  
4. Connected securely to a floor gully.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and connection  
Electrical connection U.K.  
Non-rewireable plugs BS 1363  
All electrical work should be carried out The fuse cover must be refitted when  
by a suitably qualified and competent  
person, in strict accordance with  
national and local safety regulations.  
changing the fuse, and if the fuse cover  
is lost, the plug must not be used until a  
suitable replacement is obtained. The  
colour of the correct replacement cover  
is that of the coloured insert in the base  
of the plug, or the colour that is  
embossed in words on the base of the  
plug (as applicable to the design of  
plug fitted).  
Ensure power is not supplied to the  
appliance until after installation work  
has been carried out.  
The appliance is supplied with a mains  
cable with moulded plug ready for  
connection to a 230-240V mains  
supply. The voltage and connected  
load are given on the data plate.  
Please ensure these match the  
household mains supply. The fuse  
rating is quoted on the plug.  
Replacement fuses should be ASTA  
approved to BS 1362 and have the  
correct rating. Replacement fuses and  
fuse covers may be purchased from  
your local electrical supplier.  
Connection should be made via a  
suitable switched socket which is easily  
accessible after installation.  
WARNING: THIS APPLIANCE  
MUST BE EARTHED  
For extra safety it is advisable to install  
a residual current device (RCD), with a  
trip current of 30 mA (in accordance  
with DIN VDE 0664, VDE 0100 Section  
739).  
Do not connect via an extension lead.  
Extension leads do not guarantee the  
required safety of the appliance (e.g.  
danger of overheating).  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Consumption data  
Load  
Consumption data  
Energy  
Water  
Duration  
Normal Intensive  
in kWh  
in litres  
Cottons  
95°C  
60°C1)  
5.0 kg  
5.0 kg  
5.0 kg  
5.0 kg  
5.0 kg  
1.70  
0.85  
0.85  
0.50  
0.50  
45  
45  
45  
45  
45  
1 h 42 min 1 h 57 min  
1 h 56 min1)  
1 h 26 min 1 h 56 min  
1 h 56 min1)  
1 h 26 min 1 h 56 min  
–
60°C  
40°C1)  
–
40°C  
Minimum iron  
40°C1)  
2.5 kg  
2.5 kg  
0.45  
0.45  
49  
49  
–
1 h 16 min1)  
1 h 01 min 1 h 16 min  
40°C  
Delicates  
30°C  
1.0 kg  
1.0 kg  
2.0 kg  
2.5 kg  
3.0 kg  
0.35  
0.24  
65  
39  
49 min  
37 min  
40 min  
31 min  
59 min  
Silks /  
30°C  
–
–
–
Woollens /  
30°C  
0.23  
37  
Quick wash  
40°C  
0.35  
35  
Automatic  
40°C  
0.30 - 0.60  
30 - 50  
54 min 1 h 09 min  
1) EN 60456 test programme  
Note for test institutes:  
For testing in accordance with EN 60456 you must use the Intensive option.  
Consumption data can vary from the nominal values given depending on water  
pressure, water hardness, water inlet temperature, room temperature, type and  
volume of load, fluctuations in the electricity supply and any additional options  
selected.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical data  
Height  
85.0 cm  
59.5 cm  
58.0 cm  
97.5 cm  
94 kg  
Width  
Depth  
Depth with door open  
Weight  
Maximum floor load  
Capacity  
1600 Newton (approx. 160 kg)  
5 kg dry laundry  
see data plate  
see data plate  
see data plate  
see "Consumption data"  
100 kPa (1 bar)  
1000 kPa (10 bar)  
1.60 m  
Voltage  
Rated load  
Fuse rating  
Consumption data  
Water flow pressure minimum  
Water flow pressure maximum  
Inlet hose length  
Drain hose length  
Connection cable length  
Drain pump head max.  
Drain pump length max.  
Test certificates awarded  
1.50 m  
1.60 m  
1.00 m  
5.00 m  
Radio / TV suppression, VDE  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programmable functions  
for changing standard settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programmable functions  
The programmable functions can be  
used to tailor washing programmes to  
suit your individual requirements.  
The settings are as follows:  
Setting 1:  
an increase in the rinse water level for  
the programmes listed.  
The programmable functions are  
activated with the help of the Start  
button and the programme selector.  
Setting 2:  
an increase in the water level in the  
main wash and rinses for the  
programmes listed (the washing  
machine is delivered with setting 2  
programmed as standard).  
Water plus system  
Selecting the Water plus additional  
option increases the water intake in  
the programmes listed below.  
Setting 3:  
an extra rinse cycle in the Cottons and  
Minimum iron programmes.  
The water intake is increased in the  
wash and rinse stages and in the  
Cottons and Minimum iron programmes  
an extra rinse cycle is introduced.  
Setting 4:  
an increase in the water level in the  
main wash and rinses for the  
programmes listed and also an extra  
rinse cycle in the Cottons and Minimum  
iron programmes. This setting should  
be programmed in if laundry is too hard  
after drying and if someone in the  
household suffers from a detergent  
allergy.  
There are four different settings which  
can be programmed to alter the water  
intake for the following programmes:  
– Cottons  
– Minimum iron  
– Quick wash  
– Automatic  
– Silks  
The programmed setting is then  
activated by pressing the Water plus  
additional option button.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programmable functions  
Follow steps A to G to programme  
ETurn the programme selector to the  
and store a setting in memory.  
Cottons 75°C position:  
Before you begin, first ensure that:  
– The washing machine is switched off.  
– The machine is properly closed.  
– The programme selector is at Finish.  
A P will flash in the display alternating  
with the number 1, 2, 3 or 4.  
FEach subsequent press on the Start  
button selects a different setting.  
The number alternating with the P in  
the display refers to the settings as  
follows:  
APress the Start button and keep it  
pressed in whilst carrying out steps  
B to C.  
1 = Setting 1 is selected  
(increased water level in the  
rinses)  
BSwitch the machine on with the  
I-On/0-Off button.  
CWait until the Start indicator light  
2 = Setting 2 is selected  
(increased water level in the main  
wash and in the rinses)  
comes on . . .  
D. . . and then release the Start  
button.  
3 = Setting 3 is selected  
(extra rinse in the Cottons and  
Minimum iron programmes)  
4 = Setting 4 is selected  
(increase in the water level in the  
main wash and rinses and also an  
extra rinse in the Cottons and  
Minimum iron programmes).  
GSwitch the washing machine off with  
the I-On/0-Off button.  
The Water plus button has now been  
allocated the setting you have chosen.  
This setting will remain in memory until  
another setting is programmed.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programmable functions  
Gentle action  
APress the Start button and keep it  
pressed in whilst carrying out steps  
B to C.  
Activating gentle action reduces the  
drum action and is suitable for  
BSwitch the machine on with the  
washing slightly soiled items more  
gently. It should be activated for  
garments with a single bar under the  
care label and for articles which feel  
too hard after they have been dried.  
I-On/0-Off button.  
CWait until the Start indicator light  
comes on . . .  
D. . . and then release the Start  
button.  
Gentle action can be used with the  
Cottons, Quick wash, Starch and Auto-  
matic programmes.  
ETurn the programme selector to the  
Cottons 60°C position:  
If "Gentle action" is programmed into  
the machine, every wash cycle in these  
programmes will be carried out with  
gentle action rhythm.  
A P will flash in the display alternating  
with the number 0 or 1.  
0 = Gentle action is deactivated.  
1 = Gentle action is activated  
The washing machine is delivered with  
"Gentle action" de-activated.  
FPress the Start button to change from  
one to the other. The display will  
change accordingly from 0 to 1 or  
from 1 to 0.  
Follow steps A to G to programme  
and store in memory.  
Before you begin, first ensure that:  
– The washing machine is switched off.  
– The machine is properly closed.  
– The programme selector is at Finish.  
GSwitch the washing machine off with  
the I-On/0-Off button.  
The setting you have selected is now  
stored in memory and will remain so  
until you alter it.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programmable functions  
Top-up rinse for Cottons  
APress the Start button and keep it  
pressed in whilst carrying out steps  
B to C.  
When this is activated, additional  
water flows into the drum at the end  
of the main wash to cool the suds  
down. Hot suds can damage plastic  
drainage pipes.  
BSwitch the machine on with the  
I-On/0-Off button.  
CWait until the Start indicator light  
comes on . . .  
Top-up rinse takes place when  
temperatures of 95°C and 75°C are  
selected.  
D. . . and then release the Start  
button.  
ETurn the programme selector to the  
Top-up rinse should be activated:  
Cottons 40°C position:  
– to prevent the danger of scalding if  
the drain hose is hooked over the  
edge of a sink or basin.  
A P will flash in the display alternating  
with the number 0 or 1.  
0 = Top-up rinse is deactivated  
– where the drainage pipes do not  
comply with DIN 1986.  
1 = Top-up rinse is activated  
The washing machine is delivered with  
the Top-up rinse for Cottons de-  
activated.  
FPress the Start button to change from  
one to the other. The display will  
change accordingly from 0 to 1 or  
from 1 to 0.  
Follow steps A to G to programme  
and store in memory.  
GSwitch the washing machine off with  
the I-On/0-Off button.  
Before you begin, first ensure that:  
– The washing machine is switched off.  
– The machine is properly closed.  
– The programme selector is at Finish.  
The setting you have selected is now  
stored in memory and will remain so  
until you alter it.  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programmable functions  
Memory Function  
APress the Start button and keep it  
pressed in whilst carrying out steps  
B to C.  
If an additional option(s) is selected  
for a programme, and / or the spin  
speed is altered, the machine stores  
these changes in memory at the start  
of a programme.  
BSwitch the machine on with the  
I-On/0-Off button.  
CWait until the Start indicator light  
comes on . . .  
When that particular programme is  
chosen again, the display will show the  
additional option(s) and / or spin speed  
which have been stored for that  
programme in the memory.  
D. . . and then release the Start  
button.  
ETurn the programme selector to the  
Cottons 30°C position:  
The washing machine is delivered with  
the memory function de-activated.  
A P will flash in the display alternating  
with the number 0 or 1.  
0 = Memory function is deactivated  
Follow steps A to G to programme  
and store in memory.  
1 = Memory function is activated  
Before you begin, first ensure that:  
– The washing machine is switched off.  
– The machine is properly closed.  
– The programme selector is at Finish.  
FPress the Start button to change from  
one to the other. The display will  
change accordingly from 0 to 1 or  
from 1 to 0.  
GSwitch the washing machine off with  
the I-On/0-Off button.  
The setting you have selected is now  
stored in memory and will remain so  
until you alter it.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programmable functions  
Soak  
APress the Start button and keep it  
pressed in whilst carrying out steps  
B to C.  
A length of time of between 30 minutes  
and 2 hours can be programmed in 30  
minute increments for the soak  
process.  
BSwitch the machine on with the  
I-On/0-Off button.  
If the soak option is pressed the  
selected soak time will be carried out  
for the period selected before the wash  
programme is run.  
CWait until the Start indicator light  
comes on . . .  
D. . . and then release the Start  
button.  
The machine is set as standard to a two  
hour soak time.  
ETurn the programme selector to the  
Minimum iron 60°C position:  
A P will flash in the display alternating  
Follow steps A to G to programme  
with the number 1, 2, 3 or 4.  
and store in memory.  
FEach subsequent press on the Start  
Before you begin, first ensure that:  
– The washing machine is switched off.  
– The machine is properly closed.  
– The programme selector is at Finish.  
button selects a different setting.  
The number alternating with the P in  
the display refers to the settings as  
follows:  
1 = the soak time is 2 hours  
(default setting)  
2 = the soak time is 1 hour 30 minutes  
3 = the soak time is 1 hour  
4 = the soak time is 30 minutes  
GSwitch the washing machine off with  
the I-On/0-Off button.  
The setting you have selected is now  
stored in memory and will remain so  
until you alter it.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alteration rights reserved/5104/W 2444  
M.-Nr. 06 068 940 / 02  
en - GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  

MTD Snow Blower E173 User Manual
NordicTrack Treadmill NTL20920 User Manual
Nortel Networks Switch 5510 User Manual
Olympus Battery Charger LI 10C User Manual
Omnimount TV Mount 1N1 S User Manual
Omron Healthcare Scale HBF 510 User Manual
Oreck Air Cleaner AIR94 User Manual
Palsonic Flat Panel Television TFTV325FL User Manual
Panasonic Fax Machine KX FP151E User Manual
Panasonic Home Gym EU7805 User Manual