Miele Washer Dryer 06 533 690 User Manual

Operating instructions

Washer-dryer

WT 2679 WPM

en - GB

To avoid the risk of accidents

or damage to the machine

it is essential to read

these instructions before it is

installed and used for the first time.

M.-Nr. 06 533 690

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Caring for the environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Warning and safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Guide to the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Calibrating the load size sensor to zero . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Washing and drying environmentally . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

WASHING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Brief instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Separate washing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Extra options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Pre-wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Soak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Short . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Water plus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Buzzer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Adding or removing laundry after a programme has started. . . . . . . . . . . . . . . . . 22

Spinning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Rinse and interim spin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

To omit the final spin (Rinse hold). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

To omit rinse and interim spin and the final spin . . . . . . . . . . . . . . . . . . . . . . . 23

Programme chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Garment care label symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Water softeners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Washing with several components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Fabric conditioners or liquid starch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Automatic dispensing of fabric conditioner or liquid starch to laundry

at the end of a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Adding fabric conditioner separately . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Adding starch separately . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Colour run and dye removers / dyes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

DRYING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Separate drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Extra option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Low temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Thermospin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Adding or removing laundry after a programme has started. . . . . . . . . . . . . . . . . 36

Programme chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

WASHING AND DRYING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Washing and drying in a continuous sequence . . . . . . . . . . . . . . . . . . . . . . . . . . 41

After each washing or drying programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Rinse out fluff programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Changing the programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Cancelling a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Interrupting a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Altering a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Electronic programme locking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Delay start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Cleaning the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Cleaning the filter in the water inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

What to do, if . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

The programme does not start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Fault messages in the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Problems with the load size indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

General problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

An unsatisfactory wash result . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

An unsatisfactory drying result . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

The drum door cannot be opened by pressing the Door button . . . . . . . . . . . . . . 56

Opening the drum door in the event of a blocked drain outlet and/or

power failure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Drain the machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Opening the drum door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Cleaning the drain filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Future updates (PC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Appliance guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Installation and connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Front view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Installation surface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Installing the washer-dryer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Removing the transit fittings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Levelling the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Building under a continous worktop / in a kitchen run . . . . . . . . . . . . . . . . . . . 67

Fitting a decor panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Shortening the door panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Fitting a plinth facing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

The Miele water protection system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Connection to the water supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Connection to the drainage system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Electrical connection U.K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Consumption data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Note for test institutes: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Settings menu J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Language J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Time of day . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Water plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Gentle action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Suds cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Door release. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Distribution controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Alter time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Keypad tones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Display contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Display brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Set extended cool-down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and safety instructions

the market. If using, do so at your

own risk, and follow the instructions

provided on the packaging.

Any other applications may be

dangerous. Miele cannot be held liable

for damage resulting from incorrect or

improper use or operation.

It is essential to read these

instructions.

This washer-dryer is not intended for

This washer-dryer conforms to

current safety requirements.

Inappropriate use can, however, lead

to personal injury and damage to

property.

use by persons (including children) with

reduced physical, sensory or mental

capabilities, or lack of experience and

knowledge, unless they are supervised

whilst using it or have been shown how

to use it correctly by a person

To avoid the risk of accidents and

damage to the washer-dryer, please

read these instructions carefully

before using it for the first time. They

contain important information on its

installation, safety, use and

responsible for their safety.

Safety with children

Keep children away from the washer

dryer at all times. It is not a toy! To avoid

the risk of injury do not allow children to

play on or near it or to play with its

controls. Supervise children whilst you

are using it.

maintenance.

Keep these instructions in a safe

place and ensure that new users are

familiar with the content. Pass them

on to any future owner.

Older children may only use the

washer dryer if its operation has been

clearly explained to them and they are

able to use it safely, recognising the

dangers or misuse.

Correct application

This washer-dryer must only be

used:

– to wash items which are specified by

the manufacturer to be washable on

the care label.

– to dry textiles which have been

washed in a water solution, marked

on the manufacturer's wash care

label as being suitable for tumble

drying. "Dry cleaning kits" for

freshening up garments in a tumble

dryer are increasingly available on

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and safety instructions

Technical safety

In the event of a fault or for cleaning

purposes, the washer-dryer is only

Before setting up the washer-dryer,

completely isolated from the electricity

supply when:

check it for any externally visible

damage.

Do not install or use a damaged

machine.

– it is switched off at the wall socket

and the plug is withdrawn, or

Before connecting the washer-dryer, – it is switched off at the mains, or

ensure that the connection data on the

data plate (voltage and connected

load) match the mains electricity

supply. If in any doubt, consult a

qualified electrician.

– the mains fuse is disconnected, or

the screw-out fuse is removed (in

countries where this is applicable).

The Miele “Water protection system”

protects from water damage provided

the following conditions have been met:

The electrical safety of this

washer-dryer can only be guaranteed

when continuity is complete between it

and an effective earthing system which

complies with current local and national

safety regulations. It is most important

that this basic safety requirement is

present and regularly tested, and where

there is any doubt the household wiring

system should be inspected by a

– the machine is correctly plumbed in

and connected to the electricity

supply.

– if a fault has been identified, the

machine must be examined by a

competent person before further use,

and repaired if necessary.

Faulty components must only be

qualified electrician. The manufacturer

cannot be held liable for the

replaced by genuine Miele original

spare parts. Only when these parts are

fitted can the safety standards of the

machine be guaranteed.

consequences of an inadequate

earthing system (e.g. electric shock).

Do not connect the machine to the

If the connection cable is faulty it

mains electricity supply by an extension

lead. Extension leads do not guarantee

the required safety of the washer-dryer

(e.g. danger of overheating).

must only be replaced by a Miele

approved service technician to protect

the user from danger.

Unauthorised repairs could result in

unforeseen dangers for the user, for

which the Miele cannot accept liability.

Repairs should only be undertaken by a

Miele approved service technician.

Ensure current is not supplied to the

machine until after maintenance or

repair work has been carried out.

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and safety instructions

This washer-dryer may only be used

Flooding danger.

in mobile installations such as ships if a If hooking the drain hose into a wash

risk assessment of the installation has

been carried out by a suitably qualified

engineer.

basin, check that the water can drain off

quickly enough to prevent the sink from

overflowing. Make sure the drain hose is

secure, so that the force of the water

flowing out of the hose does not

dislodge it.

In countries where there are areas

which may be subject to infestation by

cockroaches or other vermin, pay

particular attention to keeping the

machine and its surroundings in a

clean condition at all times. Any

damage which may be caused by

Take care to ensure that foreign

objects (e.g. nails, pins, coins, paper

clips) do not find their way into the

machine with the laundry. These may

cockroaches or other vermin will not be damage components of the machine

covered by the guarantee.

(e.g. suds container, drum), which in

turn can result in damage to the

laundry.

Do not make any alterations to the

washer-dryer, unless authorised to do

so by Miele.

If the correct amount of detergent is

dispensed, the machine should not

need to be descaled. If, however, you

do wish to descale the machine only

use proprietary non-corrosive descaling

agents and strictly observe the

Correct use

Do not install your washer-dryer in

rooms where temperatures below

freezing may occur. Frozen hoses may

burst or split. The reliability of the

electronic control unit may be impaired

at temperatures below freezing point.

instructions on the packaging. A Miele

descaling agent is available to order

(see "Cleaning and care").

Before using the washer-dryer for

the first time, check that the transit bars

at the rear of the machine have been

removed (see section on "Installation").

During spinning, a transit fitting which is

still in place may result in damage to

both the machine and adjacent

furniture or appliances.

Turn off the stopcock if the machine

is to be left for any length of time (e.g.

holiday), especially if there is no floor

drain (gully) in the immediate vicinity.

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and safety instructions

To prevent the risk of fire, the

following must not be dried in this

washer-dryer:

following must not be dried in this

washer-dryer:

– items which have not been washed.

– fabrics which contain a large

proportion of rubber, foam rubber or

rubber-like materials. For example,

products made from latex foam

rubber, shower caps, waterproof

textiles, rubberised articles and items

of clothing and pillows with foam

rubber filling.

– items, such as workwear, which have

not been thoroughly cleaned and

which are still soiled with grease, oil

or other desposits (such as

cosmetics, lotions etc).

If items have not been thoroughly

cleaned there is a danger that these

might ignite when heated, even after

they have been removed from the

washer-dryer at the end of the

programme.

– items which contain padding or

fillings (e.g. pillows, jackets). If these

were damaged the filling could get

out with the risk of igniting in the

washer-dryer.

– items which have been treated with

inflamable cleaning agents or

In many programmes, the heating

contain residues of acetone, alcohol,

benzine, petrol, stain remover,

phase is followed by a cooling down

phase to ensure that the items are not

turpentine, wax, wax remover or other too hot to handle when you remove

chemicals (e.g. mops and floor

cloths).

them (this also avoids the danger of the

laundry self-igniting). The programme is

not finished until the cooling down

phase has been completed.

– items which have been splashed with

hair lacquer, hair spray, nail varnish

remover or similar substances.

Ensure that you always wait until the

end of the programme before removing

the laundry.

When washing such heavily soiled

items, ensure that you use sufficient

detergent and select a high

temperature. If in doubt, wash the

items several times.

Warning: Do not switch the

washer-dryer off before the end of a

drying programme. If this was done and

the laundry was then removed immedi-

ately it could give off a great amount of

heat.

Fabric conditioner and similar

products must be used according to

the instructions on the manufacturer's

packaging.

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and safety instructions

Only use dyes specified by the

Take care, the metal cap is hot

manufacturer as being suitable for use

in a domestic washing machine. Always Open the door wide after the drying

observe the manufacturer's instructions cycle. Do not touch the metal cap

after drying.

carefully.

located on the inside of the door glass.

It will still be hot and could cause a

burn.

Colour run and dye removers

contain sulphur compounds which can

cause damage such as corrosion. Do

not use these products in this machine.

Accessories

Accessory parts may only be fitted

Make sure that any dispensing balls

when expressly approved by Miele. If

other parts are used, guarantee,

performance and product liability

claims will be invalidated.

etc. are removed from laundry before

the drying programme. These

dispensers can melt during the drying

programme and cause damage to the

machine and the laundry. Do not use

liquid dispenser balls or similar if you

are planning to wash and then dry in

one continuous sequence.

Miele cannot be held liable for

damage caused by non-compliance

with these Warning and Safety

instructions.

Textiles which have been pre-treated

in solvent based cleaning agents must

be thoroughly rinsed in clean water

before being washed in the

washer-dryer.

Never use solvent based cleaning

agents, e.g. those containing benzene,

in this machine, as this may result in

damage to component parts and create

toxic fumes. Such agents also pose a

fire and explosion hazard.

Download from Www.Somanuals.com. All Manuals Search And Download.

Guide to the machine

Control panel

aStart/Stop button

fProgramme selector

For starting the programme selected

and cancelling a programme once it

has started.

For selecting washing and drying

programmes. The programme

selector can be turned clockwise or

anti-clockwise.

bDisplay with – , OK, + and

Load/Detergent buttons

See the following page for more

details.

gWashing/Drying button

for selecting:

– Washing

cm button

For selecting delay start and

– Drying

setting the time of day.

– Washing and Drying.

dPC / Optical interface

This is used by service technicians to

run diagnostic checks on your

machine and can also be used to

update programming data in the

future.

hI-On/0-Off button

For switching the washer-dryer on

and off.

iDoor button

Opens the machine door.

eExtra option buttons

with indicator lights

Various extra options can be added

to the programmes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Guide to the machine

Display

With the programme selector at the

Further programmes position, you can

select the following programmes via the

display: Dark garments, Shirts, Denim,

Sportswear, Outerwear, Proofing,

When a programme is selected the

display can be used to select and

change programme parameters.

Curtains, Separate rinse and Starch.

Delay start and the soak time are

selected via the display.

The display shows the duration of the

programmes and the current time of

day.

The Settings J menu is also operated

via the display.

Use

- / + buttons

For altering the parameters highlighted

in the display:

This washer-dryer can be used:

– to wash separately

max. load 5 kg (depending on

programme);

- decreases the parameter or moves

the highlighting upwards

+ increases the parameter or moves

the highlighting downwards.

– to dry separately

max. load 2.5 kg (depending on

programme);

OK button

For confirming the parameter selected

and choosing the next parameter.

Load/Detergent button

For calling up the load size and the

detergent amount.

– to wash and dry in a continuous

sequence

max. load 2.5 kg (depending on

programme).

Download from Www.Somanuals.com. All Manuals Search And Download.

Before using for the first time

Setting the language

Before using the machine for the first

time ensure that it is correctly

installed and connected. See

"Installation and connection". Also

check that the drain filter is securely

tightened to prevent the risk of water

leaks during use.

èeština

dansk

deutsch

^ Use the – and + buttons to select the

language you want and confirm your

selection by pressing the OK button.

The washer-dryer has a sensor which

measures the amount of laundry in the

drum. This determines the amount of

detergent required. To allow the load

size indicator to function correctly, you

must first run a wash programme

without any laundry and without

detergent.

Setting the time of day

The display for setting the time will

appear.

12:00

^ Open the stopcock.

Set the time

^ Press the I-On/0-Off button in.

^ Set the hour with the – and + buttons

and confirm your setting by pressing

the OK button. Now set the minutes.

After you have confirmed the minute

setting, the display will change to

show the reminder to remove the

transport struts.

If the washer-dryer is being switched on

for the first time, the welcome screen

will appear.

Willkommen

The welcome screen will not appear

again once a programme lasting

longer than 1 hour has been

completed.

After a few seconds the display will

change to show the screen for selecting

your language.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before using for the first time

Reminder to remove transport struts

Calibrating the load size sensor to

zero

To avoid the risk of damage, the

transport struts must be removed

before the washer-dryer is used for

the first time. See "Installation and

connection" for instructions on how

to do this.

^ Switch the machine on.

^ Open the drum door.

^ Turn the programme selector to the

Cottons position.

^ Press and hold the Load/Detergent

button pressed in until the following

message appears in the display:

Remove transport

struts

Zero setting

^ After removing the transport struts (if

this has not already been done by

your fitter) press the OK button.

^ Turn the programme selector to Stop

and switch off the washer-dryer.

Running your first programme

The machine is now ready for use.

Your washer-dryer is now ready for the

first programme to be run.

15:00

Select programme

^ Turn the programme selector to the

Cottons position.

^ Press the Start/Stop button.

^ When the programme has finished,

turn the programme selector to Stop

and switch off the washer-dryer.

The load sensor must then be

calibrated to zero as you would with

bathroom scales.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing and drying environmentally

Energy and water consumption

Detergent

– Water consumption and energy

usage are determined by the size of

the load.

– Do not exceed the amounts of

detergent recommended by the

manufacturer on the packaging.

To make the most out of your

machine, load the maximum dry load

for the programme you are using.

– Reduce the amount of detergent for

smaller loads. Use the Load/

Detergent button.

– Use the Automatic and Express

programmes for small loads.

Choosing the correct extra option

(Pre-wash, Soak, Short)

– When smaller amounts of laundry are

washed using the Cottons

Select:

programmes, the automatic load

recognition system will reduce the

amount of water, time and energy

used. This may mean that the

programme duration is adjusted

during the course of the wash

programme.

A wash programme together with the

Short extra option for light to normal

soiling where there are no obvious

marks.

A wash programme without any extra

options for normal to heavy soiling.

– Using the Cottons 60°C programme

instead of the Cottons 95°C

A wash programme together with the

Soak option for heavily soiled

laundry.

programme will give energy savings

of between 35% and 45%. This is

sufficient for most levels of soiling.

For stubborn or old stains, use the

Soak extra option.

– Use the extra option Soak instead of

Pre-wash. If Soak is followed immedi-

ately by a main wash, the same suds

are used.

When drying straight afterwards

– Select a high spin speed for the

wash programme, as well as for the

Thermospin, if tumble drying this

laundry afterwards. This saves time

and energy.

Download from Www.Somanuals.com. All Manuals Search And Download.

WASHING

Brief instructions

^ Sort the laundry by colour and by

care label. Most garments have a

textile care label in the collar or side

seam.

The headings numbered A, B, C, . . .

show the operating sequence and can

be used as brief instructions.

Dark textiles often contain excess dye

and should be washed separately

several times before being included in a

mixed load. Always wash whites and

coloureds separately.

Separate washing

ASort the laundry

– Curtains: Remove lead weights first

or place in a laundry bag.

– Underwiring and collar stiffeners: Any

loose wiring in bras, shirt collar

stiffeners, etc. should be removed or

sewn in.

– Knitted garments, trousers and jeans,

T-shirts and sweat shirts: Turn inside

out, if recommended by the

manufacturer.

^ Empty all pockets.

– Close any zips, fasten hooks and

eyes etc before washing.

,^{Foreign objects (e.g. nails, coins,}

paper clips, etc.) can cause damage

to garments and components in the

machine.

– Fasten duvet covers and pillow cases

to prevent small items from being

trapped inside them.

Do not wash any items in this machine

which are specified by the

manufacturer as non-machine

washable on the care label. (h

symbol)

^ Badly soiled areas, stains etc. should

be cleaned as soon as possible,

preferably whilst still fresh. Spillages

should be carefully dabbed off using

a soft colourfast cloth. Do not rub!

Badly soiled areas can be pre-treated

with liquid detergent, stain removers

etc. first, following the manufacturer's

instructions. With particularly stubborn

stains ask your dry cleaner for advice.

,^{Do not use solvent-based}

cleaning agents in this machine.

Download from Www.Somanuals.com. All Manuals Search And Download.

WASHING

BSwitch the machine on

^ Use the - or + button to highlight the

programme you wish to select and

confirm your selection by pressing

the OK button.

The interior drum lighting will come on.

CSelect a programme

Wait until the display switches to show

the menu for the programme selected.

40°C

900 rpm

Duration:

1:00 h

Denim

40°C

900 rpm

Duration:

1:00 h

^ Select the programme you want.

^ Press the Washing/Drying button

repeatedly until only the Washing

indicator light is lit up.

The programme selected will appear in

the display.

The Drying indicator light must not

be lit up as well as this would mean

that the washing programme would

be followed immediately by the

drying programme.

Minimum iron

Further programmes:

When you turn the programme selector

to Further programmes, a list of these

programmes will appear in the display.

^ You can alter the highlighted

temperature with the - or + buttons.

Press the OK button to confirm the

temperature you want and move on to

the spin speed.

Dark garments

Denim

30°C

900 rpm

Shirts

Duration

0:57 h

^ You can then alter the highlighted

spin speed, select rinse hold or

without spin with the - or + buttons.

Download from Www.Somanuals.com. All Manuals Search And Download.

WASHING

^ You can select any extras options

with the extra option buttons.

DLoad the drum

^ Press the Door button to open the

drum door.

The load size indicator display will

appear.

Load <25%

The display shows the amount of

laundry loaded in the drum as a % (in

25% steps) of the maximum load

permissible for the programme

selected.

^ Each press of the top right hand

button selects the extra option in the

following order: Pre-wash or Soak or

no option is selected.

^ Unfold the laundry and load loosely

in the drum. Mixing both large and

small items gives better wash results

and also helps distribute the load

evenly during spinning.

Not all the extra options are suitable for

use with every wash programme.

The most efficient use of energy and

water is achieved when a full load is

washed. However, do not overload as

this causes creases and reduces

cleaning efficiency.

You can only select extra options which

are compatible with the basic

programme being used.

The Low temperature extra only

applies to drying.

Make sure that no garments are

caught between the drum door and

seal.

^ Select Delay start, if required.

^ Shut the door with a gentle swing.

Download from Www.Somanuals.com. All Manuals Search And Download.

WASHING

EAdd detergent

– High water consumption (an

additional rinse cycle will

automatically switch in).

The load size indicator display will be

replaced with the detergent percentage

display.

– A burden to the environment.

Detergent 75%

40%

Add slightly less than half the

amount recommended . . .

50%

Add half the amount

recommended . . .

60%

Add slightly more than half the

amount recommended . . .

75%

^ Pull out the detergent drawer and add

detergent to the compartments as

follows:

Add three quarters of the

amount recommended . . .

100%

Add the full amount

i = Detergent for the pre-wash

(¹/₄of the total amount

You also need to take the level of soiling

and water hardness into account.

recommended). This

compartment is also used for

starch formulations when

starching separately.

too little detergent results in:

– Laundry not getting properly clean

and with time it may become grey

and hard to the touch.

j = Detergent for the main wash

including Soak

– Greasy particles clinging to the

laundry.

§ = Fabric conditioner or liquid

starch

– Limescale deposits on the heater

elements.

^ Close the detergent drawer.

See "Detergent" for further information.

too much detergent results in:

– Excessive foam which causes a low

level of agitation and poor wash,

rinse and spin results.

Download from Www.Somanuals.com. All Manuals Search And Download.

WASHING

FStart the programme

^ Remove the laundry.

^ Press the flashing Start/Stop button.

Only remove laundry from the

machine once the drum has stopped

turning. Reaching into a moving

drum is extremely dangerous and

could result in injury.

The estimated programme duration will

count down in the display in one minute

steps. During the first 10 minutes the

machine measures how much water is

being absorbed by the laundry. The

programme duration may be longer or

shorter depending on this absorbency

rate.

Check that all items have been

removed from the drum. Items left in

the drum could discolour other items

in the next wash or become

The programme sequence is also

shown in the display. The washer-dryer

shows you when each section of the

programme is reached.

discoloured themselves.

The drum lighting switches off once the

programme has started.

Important! Always remove the

laundry before switching the machine

off. This is important to ensure that

the load size indicator works

correctly.

GRemove the laundry when the

programme has finished

In the anti-crease phase after the

programme has finished, the following

will appear alternately in the display:

^ Switch the machine off with the I-On/

0-Off button.

Anti-crease

See "After each washing or drying

programme" for further information.

and

Programme finished.

After washing a full load

Remove laundry, then

switch the machine off.

If you have washed a full load of

laundry and you wish to dry the

laundry in the washer-dryer

^ Turn the programme selector to the

Stop position. Press the Door button

to open the drum door.

afterwards you will have to remove

half the load. Carry out the drying

procedure in two batches.

Download from Www.Somanuals.com. All Manuals Search And Download.

WASHING

Extra options

Short

You can use the Extra option buttons to

For light to nomal soiling with no

visible staining.

augment the basic wash programmes.

Pre-wash

The duration of the main wash is

reduced.

For laundry with large amounts of dirt

(e.g. dust, sand).

Water plus

Soak

The machine is set at the factory so

that the water level in the main wash

and rinses will be increased if the

Water plus extra option is selected.

For heavily soiled and stained items

with protein stains (e.g. blood, fats and

oils, cocoa).

However, you can select other settings

for Water plus. These are described in

"Settings menu J".

A length of time of between 30 minutes

and 6 hours can be chosen, in 30

minute periods for the "Soak" process.

Buzzer

To select the soak time

An audible tone sounds repeatedly at

the end of a programme or when

Rinse hold is reached.

^ After selecting a programme, press

the Pre-wash/Soak button repeatedly

until the Soak indicator light comes

on.

The buzzer will sound repeatedly until

the machine is switched off.

15:06

Once switched on, the buzzer is active

in all programmes until it is switched off

again.

Finish:

Soak:

17:04

0.30

Use the – and + buttons to enter the

soak time. The display will also show

the corresponding finishing time for the

washing programme. Press the OK

button to confirm the soak time you

want.

You can switch the buzzer off by

pressing the buzzer button. You can

also change the volume of the buzzer.

These are described in "Settings J".

The buzzer will always sound when

there is a fault, even if the buzzer has

been switched off.

To delete the soak time

^ Set the soak time to 0.00 h and

confirm this with the OK button.

Download from Www.Somanuals.com. All Manuals Search And Download.

WASHING

Adding or removing laundry

after a programme has started

The door cannot be opened, if:

– the suds temperature is above a

certain temperature (see "Settings

menu - Door release").

Laundry can be added or removed

after the programme has started when

using the following programmes:

– the water is above a certain level

(e.g. when the Water plus extra

option has been selected).

– Cottons

– Minimum iron

– Automatic

– Express

– Starch

– the programme has reached the

Final spin stage.

– the electronic programme locking

has been activated.

^ Press the Door button to open the

drum door.

,^{Warning: The water in the}

machine will be very hot and

could cause burning or scalding.

^ Add or remove items.

^ Close the drum door.

The programme will continue

automatically.

Please note:

Once a programme has started the

machine cannot recognise any

adjustment to the load.

For this reason, if laundry is added or

removed after the start of a programme,

the machine will always complete the

programme cycle assuming a full load

which can lead to an increase in the

programme duration shown in the

display.

Download from Www.Somanuals.com. All Manuals Search And Download.

WASHING

Spinning

To omit the final spin (Rinse hold)

The maximum final spin speed

^ While the spin speed is highlighted in

the display, press the minus (-) button

repeatedly to call up the Rinse hold

setting and then press OK to confirm

your selection.

depends on the programme chosen.

Programme

rpm

1600

1200

600

Cottons

Minimum iron

Delicates

Silks

The laundry will not be spun and will

remain suspended in the final rinse

water. This reduces creasing if the

laundry is not going to be removed

from the drum immediately after the

end of the programme.

400

Woollens

Express

1200

1600

1200

600

Automatic

Dark garments

Shirts

– To start the final spin:

The machine will display the

maximum spin speed possible. You

can select a spin speed lower than

this. Start the final spin by pressing

the Start/Stop button.

Denim

900

Sportswear

Outerwear

Proofing

1200

800

1000

600

Curtains

– To end the programme:

Separate rinse

Starch

1200

1500

1600

Press the Door button. The water will

drain away. Press the Door button

again to open the door.

Drain/Spin

You can reduce the final spin speed.

However, you cannot select a final spin

speed higher than that shown in the

chart above.

To omit rinse and interim spin and

the final spin

^ While the spin speed is highlighted in

the display, press the minus (-) button

repeatedly to call up the Without spin

setting and then press OK to confirm

your selection.

Rinse and interim spin

There is a spin after the main wash and

between the rinses. A reduction in the

final spin speed will also reduce the

interim spin speed. If a spin speed of

less than 700 rpm is selected for a

Cottons programme, an additional rinse

is introduced.

The laundry is not spun after the final

rinse. The water will drain away and

the machine will go straight into the

anti-crease stage. An additional rinse

is introduced if this setting is selected

with the Cottons, Minimum iron,

Express and Automatic programmes.

Download from Www.Somanuals.com. All Manuals Search And Download.

WASHING

Programme chart

Cottons 30°C to 95°C 9876

max. 5.0 kg

Fabric type

Cottons, linens or cotton mix fabrics.

Extra options Pre-wash or Soak, Short, Water plus

Detergent

Powder detergent, detergent for coloured fabrics, liquid

detergent, tablet detergent and liquid tab detergent.

Minimum iron 30°C to 60°C 876421

max. 2.5 kg

Fabric type

Synthetics, mixed fibres and easy care cottons. If fabrics have a

high proportion of man-made fibres it is advisable to programme

the machine for "Gentle action". See "Settings menu J".

Extra options Pre-wash or Soak, Short, Water plus

Detergent Powder detergent, detergent for coloured fabrics, liquid

detergent, detergent for delicates, tablet detergent and liquid tab

detergent.

Delicates cold to 60°C 421

Fabric type For delicate garments made of synthetic fibres, mixed fibres,

rayon and easy care cottons.

Extra options Pre-wash or Soak, Short

max. 1.0 kg

Detergent

Liquid detergent for delicates.

Download from Www.Somanuals.com. All Manuals Search And Download.

WASHING

Silks / cold to 30°C c

max. 1.0 kg

Fabric type Silks and other handwashable fabrics with no wool content, e.g.

satin, lace and silk.

Note

Place socks, tights, bras etc. in a washing bag.

Extra option Water plus

Detergent

Liquid detergent for delicates.

Woollens / cold to 40°C ac

max. 2.0 kg

Fabric type Machine-washable or hand-washable wool or wool blend fabrics. If

the care label does not specify a temperature, wash using the cold

setting.

Detergent

Liquid detergent for machine-washable woollens.

Express cold to 40°C 76

max. 2.5 kg

Fabric type Small loads of items which require freshening up and which can

be washed in the Cottons programme.

Extra option Water plus

Detergent

Powder detergent, detergent for coloured fabrics, liquid detergent.

Download from Www.Somanuals.com. All Manuals Search And Download.

WASHING

Automatic cold to 40°C 7621

max. 2.5 kg

Fabric type

Mixed loads of garments suitable for the Cottons and

Minimum iron programmes. Sort according to colour.

Extra option

Detergent

Pre-wash or Soak, Short, Water plus

Powder detergent, detergent for coloured fabrics, liquid

detergent.

Dark garments cold to 40°C

max. 2.5 kg

Garment

Dark garments made from cotton or mixed fibres.

Note

Wash inside out.

Detergent

Shirts cold to 60°C

Notes

Liquid detergent for coloured fabrics.

max. 2.0 kg

– Pre-treat collars and cuffs if necessary.

– Wash silk garments in the Silks programme.

Detergent

Powder detergent, detergent for coloured fabrics, liquid

detergent.

Denim cold to 40°C

max. 2.5 kg

Notes

– Wash denim inside out.

– Denim often contains excess dye and will run during the first

few washes. Wash light and dark coloured items separately.

Detergent

Liquid detergent for coloured fabrics.

Sportswear 30°C to 60°C

max. 2.0 kg

Lightly soiled sports garments which require washing or

freshening up.

Garment

Detergent

Powder detergent, detergent for coloured fabrics, liquid

detergent.

Outerwear cold to 40°C

max. 2.0 kg

Garment

Notes

Outerwear made from micro-fibres such as Gore-Tex^®,

SYMPATEX^®, WINDSTOPPER^®etc.

– Zip up jackets before washing.

– Do not use fabric conditioner.

Detergent

Specialist or liquid detergent for delicates.

Download from Www.Somanuals.com. All Manuals Search And Download.

WASHING

Proofing 40°C

max. 3.0 kg

Item

For treating microfibre fabrics, skiwear, fine, closeweave cotton

garments (poplin) or tablecloths to provide a water and dirt

resistant finish.

Notes

– The items should be freshly washed and spun or dried

before proofing.

– For best results, the items should be heat-treated

afterwards, either in a tumble dryer or by ironing.

Proofing agent

– Only use proofing agents which are stated by the

manufacturer as being "suitable for use on membrane

textiles" as these consist of fluorochemical compounds.

Do not use proofing agents which contain paraffin.

– Add proofing agents to compartment §.

Curtains cold to 40°C

max. 2.0 kg

Item

Curtains, including net curtains, specified as

machine-washable by the manufacturer. A Pre-rinse without

detergent is carried out automatically to remove dust.

Note

For curtains which crease easily, reduce the spin speed or

select Without spin.

Extra option

Detergent

Water plus

All purpose powder detergent, powder detergent for coloured

fabrics or detergent specifically designed for washing

curtains.

Separate rinse

Extra option

Starch

max. 5.0 kg

Rinse hold

max. 5.0 kg

Note

The laundry (table cloths, napkins, overalls) should be

washed but not treated with fabric conditioner.

Starching agent Liquid starch, starch formulations, viscous liquid starch, starch

Drain/Spin

max. 5.0 kg

For spinning fabrics. Please make sure you select the

Note

appropriate spin speed.

Drain only: Select Without spin. Do not use for woollens.

Download from Www.Somanuals.com. All Manuals Search And Download.

WASHING

Programme sequence

Main wash

Rinses

Spinning

Water

level

Wash

Water Rinses Spinning Final spin

level

rhythm

Cottons

(

–

(

–

2-3²⁾

–

Minimum iron

Delicates

Silks

2-3³⁾

–

Woollens

Express

–

2-3³⁾

Automatic

Dark garments

Shirts

2-3³⁾

Denim

–

Sportswear

Outerwear

Proofing

L⁴⁾

–

Curtains¹⁾

Separate rinse

Starch

(

–

Drain/Spin

–

d = Low water level

( = Medium water level

e = High water level

a= Normal wash rhythm

b= Gentle action

c= Woollens

d= Silks

Please continue reading for further details about the programme sequences.

Download from Www.Somanuals.com. All Manuals Search And Download.

WASHING

This washer-dryer has fully electronic

controls with automatic load

Special features in the programme

sequences:

recognition. It takes in the right amount

of water required for the programme

depending on the amount of laundry

and its absorbency rate. This means

that programme cycles and durations

can vary.

Anti-crease:

At the end of every programme, with the

exception of the Woollens programme,

the drum continues to turn at intervals

for up to 30 minutes to help prevent

creasing. The door can be opened and

laundry removed at any time during the

anti-crease phase.

The programme sequences outlined in

the chart are based on the basic

programme with a full load. Extra

options which can be selected have not ¹⁾Pre-rinse: A Pre-rinse without

been taken into account.

detergent is carried out automatically

to remove dust.

The display shows the stage the

programme has reached.

²⁾A third rinse is carried out if:

– there is too much foam in the drum

– a spin speed lower than 700 rpm has

been selected

– Without spin has been selected

³⁾A third rinse is carried out if:

Without spin has been selected

⁴⁾In the Outerwear programme, laundry

is only spun after the main wash.

Download from Www.Somanuals.com. All Manuals Search And Download.

WASHING

Garment care label symbols

Detergent

All modern detergents produced for

automatic washing machines are

suitable, including liquid, compact

(concentrated), tablets and special

application detergents. Use dispensing

aids, e.g. balls, if these are supplied

with the detergent. Tablets are suitable

for full loads but note that it may be

impractical to reduce tablets for smaller

loads. Some tablets do not dissolve as

rapidly as others and may not be

suitable for programmes with short

durations.

Hand wash (If no temperature

is specified use the lowest

temperature or cold)

Do not wash

apf Dry clean

Do not dry clean

Any oxidising bleaching

agent can be used

{

Only use an oxygen based

bleach or a non-chlorine

bleach

Silks, woollens and knitwear containing

wool mixtures and hand-washable

garments should be washed using a

detergent specifically designed for

washing silks and woollens. Do not use

biological detergents on silk as the

enzymes may damage the silk.

Do not bleach

Tumble dry

At normal temperature

At low temperature

Do not tumble dry

Instructions for use and recommended

amounts for a full load are given on the

detergent packaging.

Ironing

Liquid detergent should be dispensed

using a ball provided by the

Hot iron

manufacturer for programmes without a

pre-wash. Remember to take it out of

the drum before running a drying

programme!

Medium hot iron

Cool iron

Do not iron

For programmes with a pre-wash you

will need to purchase a special

container from the Miele Spare Parts

department which sits in the main wash

compartment j of the detergent

dispenser drawer. Add liquid detergent

to this container for the main wash and

to compartment i for the pre-wash.

Download from Www.Somanuals.com. All Manuals Search And Download.

WASHING

The right amount to dispense will

depend on the following:

Washing with several components

If you wash using several components

(e.g. special application detergents),

we recommend always dispensing the

agents into compartment j in the

following order:

– The soiling level of the laundry

Lightly soiled

No visible dirt or stains.

Normally soiled

1. Detergent

Visibly dirty and/or just a few slight

stains.

2. Water softeners

3. Stain remover

Heavily soiled

Stains and soiling clearly visible.

This way the agents are distributed

more evenly.

– The water hardness level.

Check with your local water supplier

if you do not know the hardness level

in your area.

– The quantity of the laundry (add the

recommended amount of detergent).

Water softeners

A water softener can be used to cut

down on the use of detergents in hard

water areas. Dispense according to the

amount specified on the packaging.

First add detergent and then the water

softener.

Use a quantity of detergent as for soft

water.

Miele do not recommend connecting

the machine to a household water

softener.

Download from Www.Somanuals.com. All Manuals Search And Download.

WASHING

Fabric conditioners or liquid starch

formulations or viscous liquid starch

to the § compartment as it will clog

up.

Fabric conditioners make garments soft

to handle and help prevent static cling

when tumble drying.

Adding fabric conditioner separately

Starch stiffens and gives body to items

of laundry, e.g. shirts, tablecloths and

bed linen.

^ Add fabric conditioner to

compartment §.

^ Turn the programme selector to

Further programmes and select the

Starch programme.

^ Dispense according to the amount

specified on the packaging.

Automatic dispensing of fabric

conditioner or liquid starch to

laundry at the end of a programme

^ Press the Start/Stop button.

Adding starch separately

^ Prepare the starch solution in

accordance with manufacturer's

instructions on the packaging.

^ Add the starch to compartment i.

^ Turn the programme selector to

Further programmes and select the

Starch programme.

^ Press the Start/Stop button.

Colour run and dye removers / dyes

^ Do not use colour run or dye

removers in this machine.

^ Add the fabric conditioner or liquid

starch to compartment §. Do not

exceed the maximum level mark.

^ Dyes suitable for use in domestic

washing machines can be used.

However, please note that the salt

used in the dyeing process can

cause corrosion to stainless steel

components in the machine if you

dye frequently. Always observe the

manufacturer's instructions carefully.

It will be automatically dispensed in the

last rinse. At the end of the programme

a small amount of water remains in the

fabric conditioner compartment §.

If starching frequently, clean the

dispenser compartment and

especially the siphon tube and

conditioner channel regularly. See

"Cleaning the detergent dispenser

drawer". Do not add starch

Download from Www.Somanuals.com. All Manuals Search And Download.

DRYING

Separate drying

– Down-filled garments have linings

which have a tendency to shrink,

depending on the quality of the item.

They can be partially dried using the

Smoothing programme.

The separate drying programme must

be used if the load in the wash

programme is greater than the

maximum load permitted for drying,

or if you only want to dry part of the

load that was washed.

– Pure linen should only be machine

dried if specified as suitable by the

manufacturer on the care label, as

the surface of the fabric may

^ Before drying check the drying

symbol on the care label.

otherwise tend to roughen. They can

be partially dried using the

q Dry at normal temperature

Smoothing programme.

r Dry at a low temperature

(select the Low temperature extra

option)

– Loopknit garments (e.g. T-shirts and

underwear) tend to shrink depending

on their quality.Do not over-dry these

textiles. When purchasing these

s Do not tumble dry

garments it is advisable to take their

shrinkage properties into account.

If there is no symbol, dry at your own

risk applying the following principles:

– Starched laundry can be dried in the

tumble dryer. To achieve the usual

finish, double the amount of starch

should be used.

– Cottons and minimum iron items

should be dried using the

appropriate programme.

– Delicate fabrics, e.g. acrylics, should

be dried at a low temperature (select

the Low temperature extra option).

– Minimum iron fabrics and 100%

cotton shirts or blouses tend to

crease more, the larger the load. This

is particulary the case with delicate

fabrics. If in doubt, reduce the load or

use the Shirts programme.

Tips on drying

Do not put soaking wet items into the

tumble dryer. Spin them thoroughly

after washing using the appropriate

spin speed.

– New dark coloured garments should

be washed and dried separately from

light coloured garments to avoid the

danger of colours running and

discolouring other garments. Dark

coloured fibres can also settle on

light coloured garments and vice

versa.

– Woollens and wool blends tend to

become matted and shrink if dried in

a tumble dryer. They can be partially

dried using the Woollens programme.

Download from Www.Somanuals.com. All Manuals Search And Download.

DRYING

ASort the laundry

The Washing indicator light must not

be lit up as this would mean that the

corresponding washing programme

would begin before the drying

process.

^ Sort the laundry according to

type of fibre / weave and the residual

moisture content. This will help

achieve an even drying result.

BSwitch the machine on

900 rpm

The interior drum lighting will come on.

CSelect a programme

Normal

Duration:

0:27 h

^ Turn the selector to the drying

programme you require.

The programme selected will appear in

the display.

Denim

900 rpm

Duration:

Normal

1:15 h

Minimum iron

^ You can then alter the thermospin

speed which is shown highlighted

with the - or + buttons. Press the OK

button to confirm the thermospin

speed you want. The display will then

change to show the drying level.

Further programmes:

When you turn the programme selector

to Further programmes, a list of these

programmes will appear in the display.

^ You can then alter the drying level

which is shown highlighted with the -

or + buttons.

Dark garments

Shirts

The thermospin is not carried out

with Smoothing or timed drying.

Denim

^ Select the programme you want and

confirm your selection with the OK

button.

^ Select the Low temperature extra

option if required.

Exception: If the Low temperature

extra option has been selected, the

thermospin will only be carried out in

the Express programme.

^ Press the Washing/Drying button

repeatedly until only the Drying

indicator light is lit up.

^ Select Delay start, if required.

Download from Www.Somanuals.com. All Manuals Search And Download.

DRYING

DLoad the drum

the drying level reached will also be

shown in the display.

^ Open the drum door.

The drum lighting switches off once the

programme has started.

^ Load the laundry loosely into the drum.

Do not overload the drum. See the

"Programme chart" in the "Drying"

section for recommended loads for each

programme. Overloading can cause

unnecessary wear and tear to the

laundry and give a disappointing drying

result.

GRemove the laundry when the

programme has finished

In the anti-crease phase after the

programme has finished, the following

will appear alternately in the display:

Anti-crease

and

EClose the drum door

Programme finished.

Make sure you have removed any

detergent dispensing aids, e.g. plastic

dispenser balls, before drying. These

dispensers can melt during the drying

programme and cause damage to the

machine and the laundry.

Remove laundry, then

switch the machine off.

^ Turn the programme selector to the

Stop position.

^ Open the drum door.

^ Remove the laundry.

Make sure that no garments are caught

between the drum door and seal.

Check that all items have been removed

from the drum. If items are left in the

dryer, they could be damaged by

The stopcock must be open even if you

are only using the machine for drying.

overdrying when the dryer is next used.

FStart the programme

Important: Always remove the laundry

before switching the machine off. This is

important to ensure that the load size

indicator works correctly the next time the

machine is used.

^ Press the flashing Start/Stop button.

The estimated programme duration will

appear in the display. The electronics

continually assess the residual moisture

content of the laundry and adjust the

estimated time remaining for a more

accurate reading. Because of this the

time displayed can alter during the

course of a programme. The time

^ Switch the machine off.

See "After each washing or drying

programme" for further information.

remaining will count down in one minute

steps. The programme sequence and

Download from Www.Somanuals.com. All Manuals Search And Download.

DRYING

Extra option

Adding or removing laundry

after a programme has started

Low temperature

^ Press the Door button to open the

drum door.

The temperature is reduced during

the drying programme.

,^{Do not touch the metal cap}

located on the inside of the door

glass or the back of the drum when

adding or removing items. They

could be very hot - Danger of

burning.

For all delicate or minimum iron fabrics

with the r symbol on the care label

(e.g. acrylic garments).

With the exception of the Express

programme, the thermospin is not

carried out when the Low temperature

extra option has been selected.

^ Add or remove items as required.

^ Close the drum door.

Because the temperature is reduced

when the Low temperature extra option

has been selected, the programme

duration is longer.

The programme will continue

automatically.

The time left shown in the display may

now vary from the actual drying time.

The Low temperature extra only

applies to drying.

The door cannot be opened, if:

Thermospin

– the temperature is above 70°C (see

"Settings menu - Door release").

To save energy a thermospin is carried

out before the drying process begins in

the Cottons, Minimum iron, Express,

Automatic, Dark garments, Shirts,

Denim, Sportswear, and Outerwear

programmes.

– the programme has reached the

Thermospin stage.

– the electronic programme locking

has been activated.

Exception: If the Low temperature extra

option has been selected, the

thermospin will only be carried out in

the Express programme.

Exception: Thermospin will not be

carried out if Timed drying or

Smoothing has been selected.

The maximum spin speed for the

thermospin is the same as the

maximum final spin speed for the

relevant wash programme.

Download from Www.Somanuals.com. All Manuals Search And Download.

DRYING

Programme chart

Cottons

max. 2.5 kg*

Extra dry, Normal+, Normal**, Timed drying¹⁾

Fabric type

Note

Single and multi-layered cotton fabrics such as towelling,

jerseywear, underwear, flannelette bed linen.

Do not use Extra dry for jersey fabrics as they have a tendency to

shrink.

Extra options Low temperature, thermospin max. 1600 rpm

Hand iron r, Hand iron rr, Machine iron, Timed drying¹⁾

Fabric type

Cotton or linen fabrics (e.g. table linen, bed linen, starched

laundry etc.).

Note

To prevent laundry from drying out it should be rolled up until you

are ready for ironing.

Extra options Low temperature, thermospin max. 1600 rpm

Minimum iron

max. 1.25 kg*

Normal+, Normal**, Timed drying¹⁾

Fabric type

Minimum iron items made of cotton, synthetic or blended fabrics,

e.g. shirts, blouses, skirts and table cloths.

Extra options Low temperature, thermospin max. 1200 rpm

Hand iron r, Timed drying¹⁾

Fabric type

Minimum iron items made of cotton or blended cotton/synthetic

fabrics, e.g. blouses, table cloths, for machine ironing.

Extra options Low temperature, thermospin max. 1200 rpm

Weight of dry laundry

** Note for test institutes: Use this programme when testing according to EN 50229 standard

Download from Www.Somanuals.com. All Manuals Search And Download.

DRYING

Delicates

8 minutes

Fabric type

max. 1.0 kg*

For delicate fabrics made of synthetic fibres, mixed fibres, easy

care cotton shirts and blouses.

Note

This programme is for "loosening" up fabrics. They are not

completely dried in this programme. Remove garments imme-

diately at the end of the programme.

Woollens

3 minutes

Fabric type

Note

max. 1.0 kg*

Woollen or wool blend fabrics.

This programme only fluffs up woollen garments. They are not

dried completely by this programme. Remove garments imme-

diately at the end of the programme.

Express

max. 2.5 kg*

Extra dry, Normal+, Normal

Hand ironr, Hand iron rr, Machine iron, Timed drying¹⁾

Fabric type

Small loads of garments which can be dryed in the Cottons

programme.

Extra options

Low temperature, thermospin max. 1600 rpm

Automatic

max. 2.5 kg*

Normal+, Normal, Hand iron r, Timed drying¹⁾

Fabric type

Mixed load of cotton and minimum iron fabrics.

Thermospin max. 1200 rpm

Extra options

Dark garments

max. 2.5 kg*

Normal+, Normal, Hand iron r, Timed drying¹⁾

Item

Dark garments made from cotton or mixed fibres.

Low temperature, thermospin max. 1200 rpm

Extra options

Weight of dry laundry

Download from Www.Somanuals.com. All Manuals Search And Download.

DRYING

Shirts

max. 1.0 kg*

Normal+, Normal, Hand iron r, Timed drying¹⁾

Garment

Extra option

Denim

Shirts and blouses.

Thermospin max. 600 rpm

max. 2.5 kg*

Extra dry, Normal+, Normal

Hand iron r, Hand iron rr, Machine iron, Timed drying¹⁾

Extra option

Thermospin max. 900 rpm

Sportswear

max. 2.0 kg*

Normal+, Normal, Hand iron r, Timed drying¹⁾

Garment

Sportswear which is suitable for drying in a tumble dryer.

Thermospin max. 1200 rpm

Extra option

Outerwear

max. 1.0 kg*

Normal+, Normal, Hand iron r, Timed drying¹⁾

Garment

Extra option

Proofing

Normal

Outerwear which is suitable for drying in a tumble dryer.

Thermospin max. 800 rpm

max. 1.5 kg*

Garment

For thermally fixing textiles which are suitable for drying in a

tumble dryer and have been treated with a proofing agent.

Weight of dry laundry

¹⁾Timed drying: The Cottons, Minimum iron, Express, Automatic, Dark garments,

Shirts, Denim, Sportswear and Outerwear programmes can be dried using warm

air timed drying for durations of between 15 minutes and 2 hours. The drying

temperature is determined by the particular programme being used.

To smooth out creasing, you can also use Smoothing (fabrics are not dried

completely).

Download from Www.Somanuals.com. All Manuals Search And Download.

DRYING

Smoothing

8 minutes

Fabric type

max. 2.5 kg*

Cotton and linen fabrics. Minimum iron items made of mixed

fibres, cottons or synthetics, e.g. trousers, jackets, shirts.

Note

Smooths out creasing caused during the spin cycle in the wash

programme. Fabrics are not completely dried in this programme.

Remove garments as soon as the programme has finished and

leave to finish drying at room temperature.

Timed drying

- Warm air

max. 2.5 kg*

15 minutes to 2 hours

Fabric type

Note

For drying or airing individual items.

Do not select the longest drying time to start with. Check the

items as you are drying them to find the optimum time.

Timed drying

- Cool air

max. 2.5 kg*

15 minutes to 2 hours

Fabric type Any item which only needs airing.

Weight of dry laundry

Download from Www.Somanuals.com. All Manuals Search And Download.

WASHING AND DRYING

Washing and drying in a

continuous sequence

When washing and drying in a

continuous sequence the laundry is

spun at max. 1200 rpm at the end of

the wash cycle to prevent it sticking

to the drum.

Where the amount of laundry to be

washed and dried in one programme

does not exceed the maximum

weight permitted for the drying

programme, washing and drying in

one continuous sequence is

recommended.

^ Select the drying level or drying time

you require.

Denim

40°C

900 rpm ~

It is very important to read both the

"Washing" and "Drying" sections

before proceeding.

Duration:

2:15 h

When you select Further programmes

the arrow next to the spin speed in the

display indicates that you can call up

the drying level designated for the

programme.

ASort the laundry into colours and

fabric types

BSwitch the machine on

^ Now select extra options, if required.

CSelect a programme

Thermospin will be carried out at the

same speed as the spin speed

displayed for the washing

programme.

^ Turn the programme selector to the

required programme.

Minimum iron

Exception: If the Low temperature

extra option has been selected, the

thermospin will only be carried out in

the Express programme.

^ Press the Washing/Drying button

repeatedly until both the Washing

and Drying buttons are lit up.

^ Select Delay start, if required.

40°C

900 rpm

Normal

Duration:

1:26 h

^ Select the temperature and spin

speed you want and confirm with the

OK button.

Download from Www.Somanuals.com. All Manuals Search And Download.

WASHING AND DRYING

DLoad the drum

^ Open the drum door and load the

laundry loosely in the drum.

Follow the load size indicator and do

not overload.

Do not use detergent dispensing

aids, e.g. plastic dispenser balls, for

washing followed immediately by the

drying programme. These

dispensers can melt during the

drying programme and cause

damage to the machine and the

laundry.

EClose the drum door

FAdd detergent

Follow the detergent percentage

display.

GStart the programme

^ Press the Start/Stop button.

HRemove the laundry when the

programme has finished

^ Turn the programme selector to the

Stop position.

^ Open the drum door and remove the

laundry.

See "After each washing or drying

programme" for further information.

Download from Www.Somanuals.com. All Manuals Search And Download.

After each washing or drying programme

^ Open the drum door fully.

^ Close the door. Otherwise there is the

danger of objects being placed

inadvertently in the drum. If these

remained unnoticed and were

,^{Warning, the metal cap located}

on the inside of the door glass is

very hot after drying. Do not touch

it. Danger of burning!

washed or dried in the next load, they

could damage the laundry.

^ Remove the laundry.

After drying

Rinse out fluff programme

The fluff which occurs during drying

can collect in the drum and also in the

suds container. It is best to rinse out this

fluff before the machine is used again

so that it cannot be deposited on the

next load (e.g. fluff from dark garments

being deposited on lighter coloured

items) or cause a blockage.

The Rinse out fluff programme must

not be used for rinsing laundry. Make

sure that there is no laundry in the

drum before starting this programme.

^ Check the folds in the door seal for any

small articles, e.g. buttons which might

be lodged there. Remove any fluff from

drying from around the door seal.

^ Switch the machine on.

Check that all items have been

removed from the drum. Items left

behind could colour run, shrink or be

damaged in the next washing or

drying programme.

^ Turn the programme selector to the

Rinse out fluff programme.

^ Press the Start/Stop button.

The fluff will be rinsed out after a few

minutes.

^ Remove any remaining fluff from

around the door seal.

Important: Always remove the laundry

before switching the machine off. This

is important to ensure that the load

size indicator works correctly the next

time the machine is used.

^ Switch the machine off.

The load size sensor must be

recalibrated to zero after running the

Rinse out fluff programme. See

"Before using for the first time" for

instructions on how to do so.

^ Switch the machine off with the I-On/

0-Off button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the programme sequence

Cancelling a programme

Interrupting a programme

You can cancel a programme at any

time after it has started.

^ Switch the machine off with the I-On/

0-Off button.

^ Press the Start/Stop button briefly or

turn the programme selector to Stop.

To continue with the same programme:

^ Switch the machine on with the I-On/

0-Off button.

... During washing:

The suds will be pumped away and the

washing programme is cancelled.

,^{Do not switch the washer-dryer}

off before the end of a drying

programme. If this was done and the

laundry was then removed immedi-

ately, it could give off a great deal of

heat.

... During drying:

The garments will be cooled down

before the door can be opened.

If you want to remove the laundry:

Altering a programme

^ Press the Door button.

After the start of a programme it is no

longer possible to select a different

programme.

If you want to select a different

programme:

^ Switch the machine off with the I-On/

0-Off button.

You will need to cancel the current

programme before you can select a

new one.

^ Switch the machine back on again

and select a new programme.

Altering the temperature

You can alter the temperature of a

washing programme up to 5 minutes

after the programme has started.

^ Use the – and + buttons to alter the

temperature.

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the programme sequence

Altering the spin speed

Electronic programme locking

^ Press the OK button. The spin speed

will be shown highlighted. You can

use the – and + buttons to change

the spin speed up until the final spin

begins.

Programme locking prevents the

machine from being opened or the

programme cancelled during a

washing or drying programme.

You can change the thermospin

speed up until the thermospin

begins.

To activate programme locking

^ Once the programme has started,

press the Start/Stop button for at least

6 seconds until the following appears

in the display:

Altering the drying level / drying time

You can alter the drying level or drying

time during the washing programme but

not once the drying programme has

started.

Locked

Selecting or deselecting a drying

programme

The machine will now not accept any

changes and the programme will

proceed through to the end.

You can select or deselect the drying

function during a washing programme if

this is permitted for the particular

programme.

Programme locking is deactivated

automatically at the end of the

programme.

Changing extra options

Deactivating programme locking

early

It is possibe to select or deselect the

Short and Water plus extra options up

to 5 minutes after the washing

programme has started.

^ Press the Start/Stop button for at least

6 seconds until the following appears

in the display:

The buzzer can be switched on or off at

any time.

Ready

Please note that no changes are

possible if programme locking has

been activated.

Download from Www.Somanuals.com. All Manuals Search And Download.

Delay start

With delay start you can choose when

you want the programme to end. The

start of a programme can be delayed

from 30 minutes up to a maximum of 24

hours, allowing you to make use of

night-time economy electricity rates, for

example.

To begin Delay start

^ Press the Start/Stop button.

30°C

900 rpm

Start in:

3:41 h

The display will show when the

programme will be started in hours and

minutes.

The current time of day needs to have

been set for delay start to work

correctly.

To alter Delay start

To select Delay start

^ Press the m button.

^ Select the programme you want and

then press the m button.

^ Use the + and – buttons to alter the

time you want the programme to end

at.

9:51

Start time:

Finish:

9:51

11:19

^ Press the OK button to confirm the

time selected.

The display shows the current time of

day and the time the programme is due

to end.

To cancel Delay start

^ Press the m button.

^ Use the + button to select the time

you want the programme to end at.

^ Use the – button to bring the end

time of the programme forward until it

is the same as the current time of

day.

9:51

Start time:

Finish:

13:32

15:00

^ Press the OK button to confirm.

The programme will now start immedi-

ately.

The first press on the button will adjust

the programme end time to the next full

or half hour. Each subsequent press on

the button will delay the programme

end time by 30 minutes.

The actual load size can only be

determined accurately by the

machine once the programme has

started. The programme end time

may, therefore, be a bit later or

earlier than first indicated.

Use the - button to shorten the time if

you have chosen too long a time.

^ Confirm the programme end time by

pressing the OK button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Extra cleaning

,^{Disconnect the machine from the}

electricity supply by switching off at

the wall socket and withdrawing the

plug before any cleaning and

maintenance work.

Carry out a hot wash (70°C or above)

with powder detergent approx. every 6

weeks to help prevent deposits building

up in the machine. These can occur

when washing is mainly done at low

temperatures, and also lead to

Cleaning the machine

unpleasant smells. If you have no

reason to wash occasionally at this high

temperature, then run a Cottons 95°C

programme with detergent but no

laundry at regular intervals.

,^{Do not use solvents, abrasive}

cleaners, glass cleaners or

all-purpose cleaning agents.

These might damage plastic

surfaces and other components

because of the chemicals they

contain.

Cleaning the detergent dispenser

drawer

Remove detergent residues regularly.

,^{The machine must not be hosed}

down.

^ Clean the casing with a mild

non-abrasive cleaning agent or soap

and water. Wipe dry with a soft cloth.

^ The drum can be cleaned using a

suitable proprietary stainless-steel

cleaning agent following the

manufacturer's instructions on the

packaging.

E-Cloth

^ Pull out the detergent dispenser

drawer until a resistance is felt. Press

down the release catch and at the

same time pull the drawer right out of

the machine.

A microfibre "E-Cloth" is available from

the Miele UK Spare Parts Department,

or via the internet (depending on

country), which is suitable for cleaning

surfaces such as stainless steel, glass,

plastic and chrome without the use of

chemicals.

^ Clean the detergent drawer with

warm water.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Cleaning the detergent dispenser

drawer housing

^ Clean the siphon.

1. Remove the siphon from

^ Use a bottle brush to remove

detergent residues and limescale

from the jets inside the detergent

dispenser drawer housing.

compartment § and rinse under

warm running water. Clean the

siphon tube in the same way.

2. Replace the siphon.

Descaling the machine

If starching frequently, thoroughly

clean the siphon and siphon tube

regularly. A build-up of starch will

cause them to get clogged.

It the correct amount of detergent is

dispensed, the machine should not

need to be descaled. If, however, you

do wish to descale the machine, only

use proprietary non-corrosive descaling

agents and striclty observe the

instructions on the packaging. A special

descaling agent is available to order

from the Miele Spare Parts Department

or via the internet (depending on

country).

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Cleaning the porthole glass

^ First turn off the stopcock and then

unscrew the threaded union

connecting the free end of the inlet

hose to the stopcock.

^ From time to time you should also

clean ...

– the door glass on the inside using a

mild detergent or soap and water.

– the metal cap on the inside of the

door glass with a suitable proprietary

stainless steel cleaning agent

following the manufacturer's

instructions on the packaging.

^ Wipe dry using a soft cloth.

Cleaning the filter in the water

inlet

The machine has a filter to protect the

water inlet valve.

^ Remove the rubber seal 1 from the

recess.

The accessible filter in the union in the

open end of the inlet hose should be

checked every six months, or more

often if there are frequent interruptions

to the external water supply.

^ Hold the free end of the inlet hose

upside down. The plastic filter 2 will

fall out.

^ Clean the plastic filter.

^ Replace the filter and seal and

reconnect the hose.

Turn on the stopcock and check the

connection is watertight. If water leaks,

tighten the connection.

Never forget to put the filter back in

place after cleaning.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

What to do, if . . .

With the help of the following notes, minor faults in the performance of the

appliance, some of which may result from incorrect operation, can be put right

without contacting the Service Department.

,^{Repair work to electrical appliances should only be carried out by a suitably}

qualified person in accordance with local and national safety regulations.

Repairs and other work by unqualified persons could be dangerous. The

manufacturer cannot be held liable for unauthorised work.

The programme does not start.

Problem

Possible cause

Remedy

Check whether

The display remains

dark and the

There is no power to

the machine.

– the mains plug is plugged

in and switched on.

programme selector is

not lit up.

– the fuse or circuit breaker

has tripped.

The display shows:

The electronic system Enter the code for the system

lock has been lock and confirm the entry.

activated (see Settings Deactivate the system lock if

Machine locked

Enter code.

menu J/Lock).

you do not wish this message

to appear in the display the

next time the machine is

switched on.

The programme does The machine has not

Prepare the machine as

not start when Drain/

Spin has been

selected.

been prepared for

described in "Before using for

using for the first time. the first time".

The display is dark.

The display has

switched off

Press a button. Standby

comes to an end.

automatically to save

energy (Standby

mode).

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

Fault messages in the display

Message in the display

Possible cause

Remedy A

Drain

– The water outlet is

blocked or

– Clean the drain filter and

the drain pump as

fault

restricted.

described in "Opening

the drum door in the

– The drain hose has

been fixed too high.

event of a blocked drain

outlet and/or power

failure".

– The maximum drain

height is 1 m.

Inlet

– The water inlet is

blocked or

Check whether

fault

– the stopcock is opened

wide enough.

restricted.

– the inlet hose is kinked.

WPS

The water protection

system has reacted.

Call the Service

Department.

activated

Drum lighting

fault

The drum lighting unit Fit it correctly.

is not fitted correctly.

Technical fault

Call the Service

Department

There is a fault.

Start the programme again.

If the fault message

appears again, contact the

Service Department.

ATo switch off the fault message: Switch the machine off with the I-On/0-Off

button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

Problems with the load size indicator

Problem

The display

Possible cause

Remedy

There was

To recalibrate the sensor to the zero setting:

– Remove the laundry from the drum.

indicates a load of laundry in the

<25% or no load drum when the

size is indicated machine was

when the drum is switched on.

– Switch off the machine and leave the

door open.

– Switch on the machine.

full.

This has

– Turn the programme selector to the

decalibrated the

sensor from the

zero setting.

Cottons position.

Press and hold the Load/Detergent

button pressed in until the following

appears in the display:

Zero setting OK.

The display

The load size

Rotate the drum once. If the display still

indicates a load

sensor has been indicates a load greater than <25%,

greater than <25% decalibrated

when the drum is from the zero

empty. setting.

recalibrate the sensor to zero again (see

above section).

The following fault The drum door is

message appears closed.

inthe display:

– Open the drum door.

– Recalibrate the sensor to zero

again.

Zero setting not

possible

The drying

programme stops laundry in the drum.

and the following Drying individual

message appears garments or items which timed drying programme for drying

There is very little or no In future, use timed drying after

selecting a specific drying

programme or use the Warm air

in the display:

are already dry can also individual items.

cause the programme to

be cancelled.

Check load

At the end of a

The machine has

In future do not exceed the

maximum load.

drying programme recognised an

the following

message appears

in the display:

Check load

overload.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

General problems

Problem

Possible cause

Remedy

The machine shakes The machine feet are not Level the machine (see

during the spin cycle. level. "Installation and

connection").

The pump makes

strange noises.

This is not a fault! These noises occur at the end of a

pump sequence as a normal part of the operation.

Large amounts of

detergent residue

remain in the

The water supply

– Clean the filter in the

water inlet.

pressure is too low.

– It may be useful to select

the Water plus extra

option.

detergent dispenser

drawer.

Powder detergent used

In future, add washing

in conjunction with water powder into the dispenser

softeners tends to

become sticky.

drawer first, and then add

the water softener.

Fabric conditioner is The siphon tube is not

Clean the siphon, (see

not completely

dispensed or too

much water remains

in the §

correctly positioned or is "Cleaning and care -

clogged up. Cleaning the detergent

dispenser drawer").

compartment.

The laundry has not

been spun

The spin speed selected Select a higher spin speed

was too low.

next time.

satisfactorily.

When laundry is dry it Too vigorous wash

Programme in gentle action

and more water.

feels hard to the

touch.

action.

Not enough detergent

was used.

Increase detergent dose to

prevent limescal build up in

laundry.

No fabric conditioner was Use fabric conditioner in last

used. rinse.

The display is in a

different language.

A different language has Set the language you want.

been selected in The flag symbol will guide

"Settings J" "Language J". you.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

An unsatisfactory wash result

Problem

Possible cause

Remedy

Liquid detergent

does not give the

required result.

Liquid detergents usually – Use a general purpose

contain no bleaching

agents. They do not

remove fruit, coffee and

tea stains.

detergent containing a

bleaching agent.

– Pour stain removers into

compartment j and liquid

detergent into a dispenser

ball (remember to remove

the dispensing ball before

drying!).

– Never put stain removers

and liquid detergent together

in the dispenser drawer.

Grey, greasy

Insufficient detergent has – Use more detergent.

been used to break

particles cling to

washed laundry.

– Before washing the next load

down the particles of

grease in heavily soiled

laundry.

run a Cottons 95°C

programme with powder

detergent but without a load.

White residues

which look like

powder detergent

are seen on dark

textiles after

The detergent contained – Try and brush off the

compounds (zeolites) to

aid water softening which

are not soluble in water.

They have ended up on

the laundry.

residues with a soft brush

once the laundry is dry.

– Wash dark textiles using a

detergent which contains no

zeolites. Liquid detergents

usually contain no zeolites.

washing.

A stale smell is in

the drum and on

laundry.

Low temperature

washing.

Before washing the next load

run a Cottons 95°C programme

with powder detergent but

without a load.

Clothes are coming Programme was

Reduce quantity of clothes in

the drum.

out creased.

overloaded.

The wrong programme

was used.

– Check care labels and the

programme chart.

– Use easy iron conditioners.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

An unsatisfactory drying result

Problem

Possible cause

Remedy

The laundry is still The load was too small

damp after a drying for the electronics to

cycle. assess the residual

moisture correctly.

In future dry small loads in a

timed drying programme.

The laundry has formed – Turn the programme selector

a ring in the drum during

the spin because it was

distributed unevenly.

to Stop.

– Open the door and loosen

the laundry.

– Start the drying programme

again using a lower spin

speed.

The laundry has formed

a ring in the drum during

the thermospin because

it was too damp or the

spin speed was set too

high.

Warm laundry feels

damp.

Extend the cool down time, as

described in "Settings menu J",

"Set extended cool-down".

The laundry is too The required residual

damp or too dry

Either extend or shorten the

moisture level is between drying times, as described in

after a drying cycle. two drying levels.

"Settings menu J", "Alter time".

There is still water There is a blockage in

Clean the drain filter and the

drain pump as described in

"Problem solving guide –

Opening the drum door in the

event of a blocked drain outlet

and/or power failure".

in the drum after

drying.

the water outlet.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

The drum door cannot be opened by pressing the Door button

Problem

Remedy

The machine is not

connected to the

Insert the plug in the socket and switch on and / or

switch the machine on with the I-On/0-Off button.

electricity supply and / or

is not switched on.

The electronic programme Deactivate programme locking as described in

locking has been "Electronic programme locking".

activated.

The electronic system lock Deactivate the system lock as described in

has been activated.

"Settings menu J".

Power cut.

Open the drum door as described in the next

section.

The door was not correctly Press hard against the lock side of the drum door

engaged.

and then press the Door button.

There is still water in the

drum and the machine is

unable to drain.

Clean the drain filter and drain pump as described

in the next section.

The door cannot be

opened during or after a

drying programme.

For safety reasons the drum door cannot be

opened if the temperature higher than 70°C.

– Wait until the temperature is below 70°C.

– If the Door release setting has been

deactivated, the door can only be opened if the

temperature is below 55°C. Activate the Door

release setting, as described in "Settings

menu J".

– Use the "Set extended cool-down" setting, as

described in "Settings menu J".

For safety reasons the drum door cannot be opened if the suds temperature is

higher than 55°C.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

Opening the drum door in the

event of a blocked drain outlet

and/or power failure

^ Switch the machine off.

Drain the machine

If the drain outlet is blocked, (up to 25

litres) of water will be retained in the

machine.

,^{Caution: if laundry has been}

washed at a high temperature, water

draining out of the machine will still

be hot. Danger of scalding!

^ Remove the stopper.

^ Once the flow of water ceases, replace

the stopper in the end of the hose.

Opening the drum door

,^{Always make sure that the drum}

is stationary before reaching into the

machine to remove laundry.

Reaching into a moving drum is

extremely dangerous.

^ Use a screwdriver to open the flap in

the machine plinth.

^ Pull the flap and the drain hose

attached to it out of the machine.

^ Point the drain hose into a suitable

container.

^ Use a screwdriver to push the

emergency door latch downwards (see

illustration). The drum door will open.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

Cleaning the drain filter

There is a lever behind the detergent

drawer fascia panel.

^ Unscrew the drain filter completely

and then clean it thoroughly.

^ Remove the lever.

The drain filter access flap is visible

when the drum door is open.

^ Check that the impeller can turn

easily. Remove any foreign objects

(e.g. buttons, coins, etc.) and drain.

Clean the drain filter housing.

^ Put the drain filter back in place and

secure.

^ Use the lever to open the access flap.

,^{Make sure the drain filter is}

securely tightened. Otherwise there

is a risk of water leakage during use.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

Changing the lamp for the

drum lighting

The machine will still operate with no

lamp in place or if the lighting is

faulty.

^ Remove the yellow lever from behind

the detergent drawer facia panel.

^ Switch the machine on and open the

drum door.

^ Press the two prongs to separate the

plastic holder 1 from the protective

cover 2.

^ Now disconnect the machine from

the electricity supply, see "Warning

and Safety instructions".

^ Remove the faulty lamp from the

plastic holder.

The new lamp must be of the same

type (G4) with a maximum power

output of 5 watts/12 volts.

The lamps are available from an

electrical retailer, your Miele Dealer or

from the Miele Spare Parts Department.

^ Insert the new lamp in the plastic

holder.

^ Carefully fit the plastic holder and the

protective cover together.

^ Insert the lever in the slot provided in

the drum lighting unit (see illustration)

and turn anti-clockwise (a quarter

turn) until you feel a resistance.

^ Insert the lighting unit into the socket

and turn it clockwise to secure it.

It is absolutely essential for the

correct functioning of the machine

that the lighting unit is fitted correctly

in position.

^ Carefully pull out the loosened unit,

using the lever to help you.

Download from Www.Somanuals.com. All Manuals Search And Download.

After sales service

In the event of any faults which you

Future updates (PC)

cannot remedy yourself, please contact:

The indicator or check light marked PC

is the interface used by Miele service

technicians during servicing work for

testing purposes and for updating the

machine's programme data.

– your Miele dealer, or

– the Miele Service Department

(see back cover for contact details).

When contacting the Service

Department, please quote the model

and serial number of your appliance,

both of which are shown on the data

plate visible above the door glass when

the door is open.

Appliance guarantee

Please see the guarantee card supplied

with your machine.

Optional accessories

Optional accessories for this machine

are available from your Miele Dealer or

from the Miele Spare Parts Department.

N.B. A call-out charge will be applied

for unnecessary service visits where

the problem could have been

Please note that telephone calls may

be monitored and recorded for

training purposes.

rectified by the customer as

described in this installation manual.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Front view

aInlet hose (with flexible, waterproof

metallic outer sleeve)

hDetergent dispenser drawer

iDrum door

bElectrical connection

jAccess panel to the fluff filter and the

drain pump

c - f Flexible drain hose (with

detachable swivel elbow)

kAccess panel to the emergency door

release and drainage

gControl panel

lFour height adjustable screw feet

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Rear view

aProtruding lid for holding when

moving the machine

bElectricity supply cable

cTransit bar covers

dInlet hose (with flexible, waterproof

metallic outer sleeve)

eDrain hose

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Installation surface

Installing the washer-dryer

A concrete floor is the most suitable

To manoeuvre the machine out of its

installation surface, being far less prone packing case to its installlation site,

to vibration during the spin cycle than

wooden floorboards or a carpeted

surface.

hold it by the edge of the lid where it

protrudes to the rear of the machine as

well as by the handle recesses at the

front.

Please note the following points:

Please note:

^ The machine must be level and

securely positioned.

^ Do not lift the machine by the drum

door.

^ To avoid vibrations during spinning,

the machine should not be installed

on soft floor coverings.

,^{Ensure that the machine feet and}

the floor are dry to prevent the

machine from slipping during the

spin cycle.

If installing on a wooden joist floor:

^ We recommend a plywood base (at

least 59x52x3 cm) The base should

span several joists and be bolted to

the joists and not only to the

Removing the transit fittings

floorboards. Check for the presence

of pipes and cables first.

If possible, install the machine in a

corner, as this is usually the most stable

part of the floor.

,^{If the machine is installed on a}

raised plinth, it has to be secured

against slippage during spinning

using retaining clips (available from

the Miele Spare Parts Dept).

^ To remove the left and right covers

1. Use a screwdriver to prise out the

cover as illustrated.

2. Pull the cover forwards to remove.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

^ Using the spanner supplied turn the

left-hand transit bar 90°, then

^ Turn the right-hand transit bar 90°,

then

^ withdraw the transit bar.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

,^{To avoid the risk of injury the}

holes for the transit bars must be

covered after the transit bars have

been removed.

^ Fit the covers on to the two holes.

Then plug the holes as shown with

the caps.

,^{The machine must not be moved}

without the transit fittings in place.

Store them in a safe place for future

use. They must be re-fitted if the

machine is to be moved again (e.g.

when moving house).

Re-fitting the transit bars

Re-fitting is carried out by reversing the

procedure.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Levelling the machine

The machine must stand perfectly level

on all four feet to ensure safe and

proper operation.

^ Using the spanner supplied turn

counter nut 2 in a clockwise direction.

Then turn counter nut 2 together with

foot 1 to unscrew.

^ Use a spirit level to check the

machine is standing level.

Incorrect installation may increase

electricity and water consumption and

may cause the machine to move about.

False values may also show in the Load

and Detergent display.

^ Hold foot 1 securely with a pipe

wrench. Turn counter nut 2 again

using the spanner supplied until it

sits firmly up against the housing.

The four adjustable screw feet are used

to level the machine. All four feet are

screwed in when the machine is

delivered.

All four counternuts must sit firmly up

against the housing. Please also check

this for the feet which did not need

adjustment. Otherwise there is the

danger of the machine moving about.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Building under a continous worktop /

in a kitchen run

,^{A building-under kit (available}

to order) with a cover plate to

replace the machine lid is required.

It must be fitted by suitably qualified

person to ensure electrical safety.

N.B. If you wish to push your machine

under a worktop and there is space to

do this without removing the lid the

building under kit is not necessary.

Otherwise the building under kit is

essential.

N = Niche height (820-930 mm)

(illustration shows machine with lid removed)

The building-under kit is supplied with

its own installation instructions.

Niche height

Action

820 mm

None required

from 830 -

840 mm

Fit longer screw feet*

(Set to approx.

40 mm)

from 870 -

885 mm

Use one raising kit*

from 915 -

930 mm

Use two raising kits*

* accessory available to order

If the kitchen run has a continuous

furniture plinth in place, a gap must

be made for the washing machine.

– Slides are also available to order for

fitting underneath the machine feet to

protect the floor from damage when

the machine is pushed into position

or taken out for servicing.

Replacing the lid

If the lid has been removed in order to

fit a coverplate, ensure that, if the lid is

ever replaced, it fits securely into the

rear holders. Otherwise, it is not

– Connections for electricity, water and

drainage should be installed in such

a way that they remain accessible

when the machine is in place.

properly secure for transport.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Fitting a decor panel

The door has a decor frame for fitting a

decor panel (available as an optional

accessory).

Decor panel dimensions

Width. . . . . . . . . . . . . . 590 mm (-1 mm)

Height . . . . . . . . . . . . . 590 mm (-1 mm)

Thickness . . . . . . . . . . . . . . . 0.6 - 4 mm

^ Open the door.

^ Move the decor strips forwards.

A decor panel up to 4 mm thick can

now be inserted.

^ Slide the decor panel in from above.

^ Press the decor strips into position

and tighten up the loosened screws.

Now push on the upper decor strip from

the front and secure this with the 4

screws.

^ Unscrew the 4 screws on the upper

decor strip (see illustration).

^ Then take the upper decor strip off by

pulling it forwards.

^ Loosen but do not unscrew

completely, the screws on the three

remaining decor strips.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Shortening the door panel

Procedure

You can shorten the door panel to

match the height of adjacent kitchen

unit door fronts.

^ Open the door.

^ First remove the door panel:

– to do this unscrew the 10 screws

(see arrows) from the inside machine

door.

First of all you need to calculate

measurement X. This is the distance

from the lower edge of the machine

door to the lower edge of an adjacent

kitchen unit door front.

^ Then remove the three decor strips

from the door panel:

– to do this unscrew the screws.

^ Shorten the door panel and the two

side decor strips at the bottom by

measurement X using a suitable saw.

^ Drill four holes for securing the lower

decor strip into the door panel.

^ Fit the decor strips and the door

panel.

If you are intending to fit a decor

panel, check whether this will also

need to be shortened

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Fitting a plinth facing

Installation

The gap between the lower edge of the

machine plinth and the floor can be

closed up using a suitable kitchen

furniture plinth facing.

The washing machine plinth has a

special groove in which a plinth facing

can be fitted.

Plinth facing dimensions

Length: 592 - 596 mm

Thickness: 8 mm

^ Calculate height (H) from the floor up

into the groove (on the underside of

the washing machine).

Height (H): The plinth facing height

must be calculated after aligning the

height of the machine with the screw

feet or after fitting the height-adjustment

frame(s).

^ Cut the plinth facing to size.

^ Slide it into the groove.

Useful tip:

If the machine is fitted on a

height-adjustment frame, you can use

double-sided adhesive tape on the

back of the plinth facing to secure it to

the height-adjustment frame too.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

The Miele water protection

system

– Overflow protection

This prevents the maching taking in

too much water. If the water level

exceeds a certain level, the drain

pump switches in and pumps the

excess water away.

The Miele water protection system

protects machine from water damage.

The system consists of three main

components:

3) Drain hose

1) the inlet hose

The drain hose is protected by a

ventilation system which prevents the

machine from being emptied

completely.

2) the electronic unit and the machine

housing

3) the drain hose

1) Inlet hose

– The inlet hose is tested to withstand

pressure of more than 14,000 kPa.

– It has a protective sleeve which is

made from metal to protect the hose

from damage.

2) Electronic unit and machine

housing

– Sump

Any leaking water is collected in a

sump in the base of the machine. A

float switches off the safety valves,

preventing any more water flowing

into the machine and water in the

suds container is pumped away.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Connection to the water

supply

In order to protect the water inlet

valve, the dirt filter in the water inlet

valve connection must not be

removed.

The machine should be connected to a

mains water supply in accordance with

local and national safety regulations.

The German authorities do not require it

to have a non-return valve as the

Extension hose

A 1.5 metre long (metal) extension hose

is available from your Miele dealer or

the Miele Spare Parts Department as an

optional extra.

washer-dryer has been designed to

comply with DIN regulations.

The machine is designed to operate

with a flow pressure of between

100 kPa and 1,000 kPa. If it is higher

than 1,000 kPa it is essential to fit a

reducer valve.

This hose is tested to withstand

pressures of up to 14,000 kPa and can

be used as a flexible extension to the

water supply.

Connection to the mains water supply

should incorporate a mains stopcock

with ³/₄" thread. The stopcock should be

fitted by a qualified plumber.

,^{The connection point is subject}

to mains water pressure. Turn on the

stopcock slowly and check for leaks.

Correct the position of the washer

and union if appropriate.

This machine is not suitable for

connection to a hot water supply and

connection to a household water

softener is not recommended.

Maintenance and care

Only use a genuine Miele hose which is

pressure tested to 14,000 kPa should

you ever need a replacement or

extension.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Connection to the drainage

system

Drain hose connection:

1. Direct into a sink or basin.

Please note the following:

The machine drains via a drain pump

with a delivery head of 1 metre. The

drain hose must not be kinked as this

restricts drainage. The swivel elbow at

the end of the hose can be turned in

either direction, or can be detached if

required, with a sharp twist and pull.

– Hook the hose over the edge and

secure.

– Make sure that the water can drain

away freely without hindrance.

Otherwise there is a risk of water

overflowing or of some of the drained

water being sucked back into the

machine.

If required the drain hose can be

extended to a length of 5 m. The

necessary parts can purchased from

the Miele Spare Parts Department or

your Miele dealer.

2. Connected securely to a plastic drain

pipe with a rubber nipple. There is no

need to use a non-return valve.

3. Connected securely to a standpipe.

4. Connected securely to a floor gully.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Electrical connection U.K.

Non-rewireable plugs BS 1363

All electrical work should be carried out The fuse cover must be refitted when

by a suitably qualified and competent

person, in strict accordance with

national and local safety regulations.

changing the fuse, and if the fuse cover

is lost, the plug must not be used until a

suitable replacement is obtained. The

colour of the correct replacement cover

is that of the coloured insert in the base

of the plug, or the colour that is

Ensure power is not supplied to the

appliance until after installation work

has been carried out.

embossed in words on the base of the

plug (as applicable to the design of

plug fitted).

The appliance is supplied with a mains

cable with moulded plug ready for

connection to a 230-240V mains supply.

The voltage and connected load are

given on the data plate. Please ensure

these match the household mains

supply. The fuse rating is quoted on the

plug.

Replacement fuses should be ASTA

approved to BS 1362 and have the

correct rating. Replacement fuses and

fuse covers may be purchased from

your local electrical supplier.

Connection should be made via a

suitable switched socket which is easily

accessible after installation.

WARNING: THIS APPLIANCE

MUST BE EARTHED

For extra safety it is advisable to install

a residual current device (RCD), with a

trip current of 30 mA (in accordance

with DIN VDE 0664, VDE 0100 Section

739).

Do not connect via an extension lead.

Extension leads do not guarantee the

required safety of the appliance (e.g.

danger of overheating).

Download from Www.Somanuals.com. All Manuals Search And Download.

Consumption data

Load

Consumption data

Energy

Water

Duration

in kWh

in litres

Short

Normal

Washing

Cottons

95°C

60°C

40°C

5.0 kg

2.5 kg

1.0 kg

2.5 kg

2.0 kg

1.0 kg

1.70

0.85

1 h 53 min

2 h 08 min

1 h 58 min

1 h 20 min

59 min

1 h 29 min

0.49

1 h 29 min

Minimum iron 40°C

0.44

1 h 05 min

Delicates

Automatic

Express

30°C

40°C

30°C

0.33

49 min

0.30 - 0.60

0.30

30 - 50

1 h 00 min

1 h 15 min

32 min

Woollens /

Silks /

0.22

39 min

0.24

36 min

Drying

Cottons

Normal

2.5 kg

1.30

0.65

1 h 12 min

37 min

Minimum iron Normal

1.25 kg

Washing and Drying in a continuous sequence

Cottons

60°C

5.0 kg

3.40

4 h 30 min

3 h 00 min

Normal

Cottons

60°C

2.5 kg

2.30

Normal

Note for test institutes:

EN 60456 test programme

EN 61121 test programme

EN 50229 test programme

Consumption data can vary from the nominal values given depending on water

pressure, water hardness, water inlet temperature, room temperature, type and

volume of load, fluctuations in the electricity supply and any extra options

selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical data

Height

850 mm

Height for building under

Width

820 mm

595 mm

Depth with lid fitted

Depth without lid

Depth with door open

Weight

600 mm

575 mm

1180 mm

106 kg

Maximum floor load

1600 Newton (approx. 160 kg)

Capacity - Washing

Capacity - Drying

5.0 kg dry laundry

2.5 kg dry laundry

Voltage

see data plate

see plug

Connected load

Fuse rating

Consumption data

Water flow pressure minimum

Drain hose length

see "Consumption data"

100 kPa (1 bar)

1.000 kPa (10 bar)

1,60 m

Inlet hose length

Drain hose length

1,50 m

Connection cable length

Drain pump head max.

Drain pump length max.

Lamp for drum lighting

Test certificates awarded

1,60 m

1,00 m

5,00 m

Type G4 (5 watts/12 volts)

Radio / TV suppression, VDE

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings menu J

Language J

The Settings menu is used to alter the

machine's electronics to suit

The display can be set via the

Language sub-menu to appear in

one of several different languages.

changing requirements.

Settings can be altered at any time.

The flag after the word Language acts

as a guide to prevent a language which

will not be understood from being set.

To open the Settings menu

ASwitch on the machine. The main

menu will appear.

A tick will appear beside the language

to show that it has been set.

15:03

^ Select the language you want and

confirm your selection.

Select programme

BAfter a few seconds an additional line

will appear in the display.

15:03

Select programme

Settings F...

CConfirm your selection by pressing

the OK button.

DThis will take you into the Settings

menu.

Back A

Language F. . .

Time . . .

EUse the – and + buttons to select the

setting you want and confirm your

selection by pressing the OK button.

Important:

If you do not make a selection in the

Settings menu and in its sub-menus

within approx. 20 seconds, the menu

display will revert to the main menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings menu J

Time of day

Water plus

You first have to decide whether you

want the time to show in the display.

Then you have to select either a 24 hour

or 12 hour clock.

This setting is used to select the

water intake setting for the Water plus

extra option.

There are three different options:

Then set the current time of day.

Water + (the machine is delivered with

this option selected)

To select a 24 hour or 12 hour clock

^ Use the – and + buttons to select the

clock option setting you want and

confirm your selection by pressing

the OK button.

The water intake is increased in the

wash and rinse stages of the

programmes.

Extra rinse

The display for setting the time of day

will then appear.

An extra rinse is introduced in the

Cottons and Minimum iron programmes.

To set the time of day

Water + and Extra rinse

^ The water intake is increased in the

wash and rinse stages and an

additional rinse is also introduced in

the Cottons and Minimum iron

programmes.

00 : 00

Set the time

^ Set the hour with the – and + buttons

and confirm your setting by pressing

the OK button. Now set the minutes.

The display will return to the Settings

menu.

A tick will appear beside the option to

show that it has been set.

The time of day can also be set by

pressing the m button before

selecting a programme.

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings menu J

Gentle action

The machine is delivered with Suds

cooling deactivated.

Activating gentle action reduces the

drum action and is suitable for

A tick will appear beside the option to

show that it has been set.

washing slightly soiled items more

gently. It should be activated for

garments with a single bar under the

care label and for articles which feel

too hard after they have been dried.

Door release

When this setting is activated the

drum door can be opened during a

drying programme at temperatures

up to 70°C.

Gentle action can be activated for the

Cottons and the Minimum iron

programmes.

If the Door release setting is

deactivated, the door can only be

opened at temperatures up to 55°C.

If Gentle action has been activated the

wash rhythm will be gentle in all Cottons

and Minimum iron programmes.

,^{Warning: High temperatures}

can cause burning or scalding.

The machine is delivered with the

Gentle action setting deactivated.

A tick will appear beside the option to

show that it has been set.

The machine is delivered with this

setting activated.

A tick will appear beside the option to

show that it has been set.

Suds cooling

When this is activated, additional

water flows into the drum at the end

of the main wash to cool the suds

down. Hot suds can damage plastic

drainage pipes.

^ Select the option you want and

confirm your selection.

Suds cooling takes place when a

Cottons 95-75°C programme is

selected.

Suds cooling should be activated:

– to prevent the danger of scalding if

the drain hose is hooked over the

edge of a sink or basin.

– where the drainage pipes do not

comply with DIN 1986.

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings menu J

Distribution controller

Alter time

The maximum final spin speed is

limited to prevent the laundry sticking

to the drum. (This setting is only

available when washing and drying in

a continuous sequence).

The machine is designed to dry

effectively using as little energy as

possible. However, it is possible to

lengthen or shorten the drying time

by up to 4 minutes.

There are 4 different options:

1200 rpm (factory default setting)

1100 rpm

The machine is delivered with the

drying time on setting 3 (= 0 minutes).

1000 rpm

900 rpm.

A tick will appear beside the option to

show that it has been set.

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings menu J

Lock

^ After the last number has been

entered, press the OK button.

The system lock prevents your

machine being used without your

knowledge.

Yes

Confirm code

When the system lock has been

activated, you have to enter a code after

switching the machine on. Otherwise

the machine cannot be operated.

^ Confirm the code with the OK button

or if you want to correct a mistake,

press the – button.

^ The lock will now be activated when

the machine is switched off.

To activate the lock

Back A

To unlock the washer-dryer

Activate

When the machine is switched on

again, the display will request the lock

code.

^ Select Activate and confirm your

selection.

^ Enter lock code 125 as described

above and confirm the entry.

^ The display will now request that a

code is entered. The code is 125 and

cannot be altered.

Entry OK

Lock deactivated

To enter the lock code

The code is: 125

The machine is now unlocked.

To deactivate the lock

Proceed as for activating the lock.

Enter code

^ Use the + button to enter the first

number. Confirm your selection of this

number by pressing the OK button.

Now set the second number.

^ Repeat the process until all three

numbers have been entered.

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings menu J

Temperature

Keypad tones

You can choose for the temperature

to be displayed as °C/Celsius or

°F/Fahrenheit.

An audible tone sounds each time a

button is pressed.

The machine is delivered with the

keypad tone switched off.

A tick will appear beside the option to

show that it has been set.

A tick will appear beside the option to

show that it has been set.

^ Select the option you want and

confirm your selection.

Display contrast

Buzzer

There are ten different display

contrast settings.

When the buzzer function has been

activated, an audible tone sounds at

the end of a programme or when

Rinse hold is reached.

The machine is delivered with the

display contrast on setting 5.

The display contrast will change as

soon as a different setting is chosen.

There are two volumes.

Normal (the machine is delivered with

this option selected)

^ Set the display contrast you require.

The buzzer sounds at the end of a

programme or when Rinse hold is

reached.

Display brightness

There are ten different display

brightness settings.

Loud

The machine is delivered with the

display brightness on setting 5.

The buzzer sounds at maximum volume

at the end of a programme or when

Rinse hold is reached.

The display brightness will change as

soon as a different setting is chosen.

A tick will appear beside the option to

show that it has been set.

^ Set the display brightness you

require.

^ Select the option you want and

confirm your selection.

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings menu J

Standby

Memory

To save energy, the display goes out

after 10 minutes and the indicator

light for the Start/Stop button will start

flashing slowly.

If an extra option has been selected

for a programme, or the

recommended spin speed has been

altered, the machine will store the

changes in memory at the start of a

programme.

There are two options:

When this programme is chosen again

these settings will appear in the display.

Standby is activated:

– if a programme is not selected after

the machine has been switched on.

The machine is delivered with the

memory function deactivated.

– after a programme has started.

– at the end of a programme.

A tick will appear beside the option to

show that it has been set.

Not in current Prog. (the machine is

delivered with this option selected)

Set extended cool-down

The cooling down phase which takes

place before the end of a programme

can be lengthened if required. This

makes the garments easier to handle.

Standby is activated:

– if a programme is not selected after

the machine has been switched on.

– at the end of a programme.

The cooling down phase can be

lengthened from 0 min (standard

cooling down phase = default setting)

to 18 minutes.

Pressing one of the buttons switches

the display back on again.

A tick will appear beside the option to

show that it has been set.

The programme duration will increase

accordingly.

To close the Settings menu

Back A

LanguageF

Time . . .

^ Select Back and confirm your

selection.

Download from Www.Somanuals.com. All Manuals Search And Download.

Alteration rights reserved/2208

M.-Nr. 06 533 690 / 02

Download from Www.Somanuals.com. All Manuals Search And Download.

Miele Cooktop DA 5490 W User Manual
Moxa Technologies Computer Hardware W311 User Manual
National Instruments Network Card Image Acquisition Software User Manual
NetComm Switch NP2008 User Manual
New Media Technology Portable Multimedia Player multi media User Manual
Nikon Camera Accessories EN EL4a User Manual
OPPO Digital Blu ray Player BDP 80 User Manual
Panasonic Network Card 2SC4562G User Manual
ParaBody Home Gym PBF011AB User Manual
Patton electronic Network Card 2701RC User Manual