Operating instructions
for washing machines
To avoid the risk of accidents or damage to the machine, it is essential
to read these instructions before it is installed and used for the first time.
en-GB
M.-Nr. 09 900 700
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Caring for the environment................................................................................... 2
Warning and Safety instructions ......................................................................... 6
Operating the washing machine......................................................................... 13
Before using for the first time............................................................................. 15
1. Prepare the laundry ......................................................................................... 17
2. Select a programme ........................................................................................ 18
3. Load the washing machine ............................................................................. 19
4. Select programme settings............................................................................. 20
5. Add detergent................................................................................................... 21
Extra options ........................................................................................................ 23
Pre-wash................................................................................................................ 23
Soak....................................................................................................................... 23
Water plus.............................................................................................................. 23
Spinning ................................................................................................................ 24
Programme chart................................................................................................. 25
Programme sequence ......................................................................................... 28
Garment care label symbols ............................................................................... 30
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Changing the programme sequence ................................................................. 31
Cancelling a programme........................................................................................ 31
Changing a programme ......................................................................................... 31
Temperature...................................................................................................... 31
Spin speed........................................................................................................ 31
Detergent.............................................................................................................. 33
Water softeners...................................................................................................... 33
Miele recommended detergents............................................................................ 34
Cleaning and care................................................................................................ 37
Problem solving guide......................................................................................... 40
as normal............................................................................................................... 42
General problems with the washing machine........................................................ 43
An unsatisfactory wash result................................................................................ 44
Opening the door.............................................................................................. 47
After sales service ............................................................................................... 48
Repairs................................................................................................................... 48
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Installation and connection................................................................................. 49
Installation surface................................................................................................. 51
Removing the transit bars...................................................................................... 51
Screwing out and adjusting the feet................................................................. 54
Please note: ...................................................................................................... 55
Connection to the drainage system....................................................................... 58
Technical data ...................................................................................................... 60
Consumption data ............................................................................................... 61
Programmable functions..................................................................................... 62
Water plus system ................................................................................................. 62
Memory.................................................................................................................. 65
Optional accessories........................................................................................... 67
Detergent ............................................................................................................... 67
Specialist detergents ............................................................................................. 67
Fabric care ............................................................................................................. 68
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
This washing machine complies with current safety requirements.
Inappropriate use can, however, lead to personal injury and dam‐
age to property.
To avoid the risk of accidents and damage to the machine, please
read these instructions carefully before using it for the first time.
They contain important information on its safety, use and mainte‐
nance.
Keep these instructions in a safe place and ensure that new users
are familiar with the content. Pass them on to any future user.
Correct application
This washing machine is intended for use in domestic households
and similar working and residential environments.
The washing machine is not intended for outdoor use.
It must be used only as a domestic appliance to wash items
which are specified by the manufacturer as being washable on the
wash care label. Miele cannot be held liable for damage resulting
from incorrect or improper use or operation.
The washing machine can only be used by people with reduced
physical, sensory or mental capabilities, or lack of experience or
knowledge, if they are supervised whilst using it or have been shown
how to use it safely and recognise and understand the consequen‐
ces of incorrect operation.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Safety with children
Children under 8 years of age must be kept away from the wash‐
ing machine unless they are constantly supervised.
Children 8 years and older may only use the washing machine un‐
supervised if they have been shown how to use it safely and recog‐
nise and understand the consequences of incorrect operation.
Children must not be allowed to clean or maintain the washing
machine unsupervised.
Please supervise children in the vicinity of the washing machine
and do not let them play with it.
For machines with a 'porthole' door, remember that the porthole
glass will be hot when washing at very high temperatures. Do not let
children touch it.
Technical safety
Please observe the instructions in "Installation and connection"
and "Technical data".
Before setting up the washing machine, check it for any externally
visible damage. Do not install or use a damaged machine.
Before connecting the washing machine, ensure that the connec‐
tion data on the data plate (fuse rating, voltage and frequency)
match the mains electricity supply. If in any doubt, consult a quali‐
fied electrician.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Reliable and safe operation of this washing machine can only be
assured if it has been connected to the mains electricity supply.
The electrical safety of this washing machine can only be guaran‐
teed when correctly earthed.
It is essential that this standard safety requirement is met. If in any
doubt, please have the wiring system of the building tested by a
qualified electrician.
Miele cannot be held liable for the consequences of an inadequate
earthing system (e.g. electric shock).
Do not connect the washing machine to the mains electricity sup‐
ply by a multi-socket adapter, extension lead or similar. These do
not guarantee the required safety of the machine (fire hazard due to
the risk of overheating).
Faulty components must only be replaced by genuine Miele origi‐
nal spare parts. Only when these parts are fitted can Miele guaran‐
tee the safety standards of the machine.
The electrical socket must be easily accessible after installation
so that the machine can be disconnected from the electricity supply
if necessary.
Unauthorised repairs could result in unforeseen dangers for the
user, for which the manufacturer cannot accept liability. Repairs
should only be undertaken by a Miele authorised service technician,
otherwise any subsequent damage will not be covered by the guar‐
antee.
If the electrical connection cable is faulty it must only be replaced
by a Miele authorised service technician to protect the user from
danger.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
The machine must be isolated from the electricity supply when
cleaning and maintaining the machine and in the event of a fault.
The machine must only be connected to the on-site water supply
using a new hose kit. Old hose kits must not be re-used. Check the
condition of the hoses regularly so that you can replace them in
good time and avoid the risk of any water damage.
The water flow pressure must be at least 100 kPa and should not
exceed 1000 kPa.
In areas which may be subject to infestation by cockroaches or
other vermin, pay particular attention to keeping the machine and its
surroundings in a clean condition at all times. Any damage which
may be caused by cockroaches or other vermin will not be covered
by the guarantee.
The machine must not be used in a non-stationary location (e.g.
on a ship).
Do not make any alterations to the machine, unless authorised to
do so by Miele.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Correct use
Do not install the washing machine in a room where there is a risk
of frost. Frozen hoses may burst or split. The reliability of the elec‐
tronic control unit may be impaired at temperatures below freezing
point.
Before using the machine for the first time, check that the transit
bars at the rear of the machine have been removed (see "Installation
and connection - Removing the transit bars"). During spinning, a
transit bar which is still in place may result in damage to both the
machine and adjacent furniture or appliances.
Turn off the stopcock if the machine is to be left for any length of
time (e.g. holiday), especially if there is no floor drain (gully) in the
immediate vicinity.
Flooding danger.
If hooking the drain hose into a wash basin, check that the water can
drain off quickly enough to prevent the sink from overflowing. Make
sure the drain hose is secure, so that the force of the water flowing
out of the hose does not dislodge it.
Take care to ensure that foreign objects (e.g. nails, pins, coins,
paper clips) do not find their way into the machine with the laundry.
These may damage components of the machine (e.g. suds contain‐
er, drum), which in turn can result in damage to the laundry.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
The maximum load for this washing machine is 7 kg (dry weight).
See the "Programme chart" for the maximum recommended loads
for individual programmes.
If the correct amount of detergent is dispensed, the machine
should not need to be descaled. If, however, you do wish to descale
it, only use a proprietary natural citric acid based descaling agent.
Miele recommends using Miele descaling agent which is available to
the instructions on the packaging.
Textiles which have been pre-treated in solvent based cleaning
agents must be thoroughly rinsed in clean water before being wash‐
ed in the machine.
Do not use solvent based cleaning agents, e.g. those containing
benzine, in this machine, as this may result in damage to component
parts and create toxic fumes. Such agents also pose a fire and ex‐
plosion hazard.
Do not use solvent based cleaning agents, e.g. those containing
benzine, to clean the surfaces of the machine. They can cause dam‐
age to plastic surfaces.
Only use dyes specified by the manufacturer as being suitable for
use in a domestic washing machine. Always observe the manufac‐
turer's instructions carefully.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Colour run and dye removers contain sulphur compounds which
can cause damage such as corrosion. Do not use these products in
this machine.
If detergent comes into contact with the eyes, rinse them thor‐
oughly with lukewarm water immediately. If swallowed, seek medical
assistance immediately and retain the packaging or label for refer‐
ence. Those with skin problems or sensitive skin should avoid their
skin coming into contact with detergent.
Accessories
Accessory parts may only be fitted when expressly approved by
Miele. If other parts are used, guarantee, performance and product
liability claims will be invalidated.
A Miele tumble dryer can be stacked on top of a Miele washing
machine using the appropriate stacking kit (available as an optional
accessory). Please make sure you order the correct one for the Miele
washing machine and Miele tumble dryer.
If installing the machine on a Miele plinth, (available as an optional
accessory, depending on country), please make sure you order the
correct one for this washing machine.
Miele cannot be held liable for damage caused by non-compli‐
ance with these Warning and Safety instructions.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the washing machine
Control panel
a
f
Display
Programme sequence indicator
See the next page for more informa‐
tion.
lights
Show which stage of the programme
has been reached.
b
c
Start button
For starting the wash programme.
g
Check / Fault indicator lights
– see "Problem solving guide".
Extra option buttons
– The PC check light is also used by
service technicians to run diagnos‐
tic checks and may be used to up‐
date programming data in the fu‐
ture.
For selecting extra options. Use the
upper button to select either Short,
Pre-wash or Soak. Use the lower
button to select Water plus.
Indicator light on = option selected
Indicator light off = option not selec‐
ted
h
button
For switching the washing machine
on and off.
To save energy the washing machine
will switch off automatically 15 mi‐
nutes after the end of the pro‐
gramme/anti-crease phase or after
being switched on if no other selec‐
tion is made.
d
e
Spin button with spin speed indica‐
tor lights
For selecting the spin speed.
Programme selector
For selecting the wash programme
and temperature for that programme.
The programme selector can be
turned clockwise or anti-clockwise.
i
Door button
For opening the door.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the washing machine
Display
The display shows:
– the programme duration (time left
display)
– the programmable functions
Programmable functions
The programmable functions can be
used to tailor washing programmes to
suit your personal requirements. In pro‐
gramming mode, the display will show
the function selected.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Running the first programme
Open the stopcock.
Before using the machine for the
first time ensure that it is correctly in‐
stalled and connected. See "Installa‐
tion and connection". Also check
that the drain filters are securely
tightened to prevent the risk of water
leaks during use.
Press the button in.
Turn the programme selector to Cot‐
tons 60°C.
Press the Start button.
This washing machine has undergone
a complete functional test at the fac‐
tory and there will be some residual
water in the drum from this process.
When the programme has finished, your
machine is ready to use for the first
time.
Switch the washing machine off with
the button at the end of the pro‐
gramme.
For safety reasons, spinning is not pos‐
sible until the machine has been pre‐
pared for using for the first time. To ac‐
tivate the spinning function you must
run a wash programme without laundry
and without detergent.
Using detergent could result in an ex‐
cessive build-up of foam.
This also activates the ball valve. The
ball valve prevents detergent escaping
from the suds container into the sump
during a wash programme, thus making
maximum use of the detergent.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing environmentally and economically
Energy and water consumption
Detergent
– Water consumption and energy us‐
age are determined by the size of the
load.
– Do not exceed the amounts of deter‐
gent recommended by the manufac‐
turer on the packaging.
To make the most of your machine,
load the maximum dry load for the
programme you are using.
– Adjust the dosage to the degree of
soiling of the laundry.
– Reduce the amount of detergent with
– When smaller amounts of laundry are
washed, the automatic load recogni‐
tion system will reduce the amount of
water and energy used.
smaller loads (approx. 1/3 less than
the amount recommended can be
used when washing a half load).
Choosing the correct extra option
(Short, Soak, Pre-wash)
– Use the Express 20 programme for
small, lightly soiled loads.
Select:
– Modern detergents make it possible
to wash at lower temperatures (e.g.
20°C). Washing using lower tempera‐
ture settings will save energy.
– A wash programme together with the
Short extra option for light to normal
soiling where there are no obvious
marks.
– Use the Soak extra option instead of
Pre-wash. If Soak is followed imme‐
diately by a main wash, the same
suds are used.
– A wash programme without any extra
options for normal to heavy soiling
with visible staining.
– To maintain the hygiene of the ma‐
chine, carry out a hot wash (60°C or
above) using powder detergent at
regular intervals. The Hygiene info
check light will appear to remind you
to carry out a hot wash.
– A wash programme together with the
Soak extra option for heavily soiled
laundry.
– The Pre-wash extra option for laun‐
dry with large amounts of dirt (e.g.
dust, sand).
When drying with a tumble dryer
Selecting the highest possible spin
speed for the wash programme will
save energy when drying in a tumble
dryer afterwards.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Prepare the laundry
Tip: Badly soiled areas can be pre-trea‐
ted with liquid detergent, stain remov‐
ers etc. first, following the manufactur‐
er's instructions. With particularly stub‐
born stains ask your dry cleaner for ad‐
vice.
If you use a solvent-based
cleaning agent (e.g. one containing
benzine) to pre-treat a stain, make
sure that any plastic parts (e.g. but‐
tons) are protected, and that the
cleaning agent is rinsed off before
washing the garment in the machine.
Empty all pockets.
Foreign objects (e.g. nails, coins,
paper clips, etc.) can cause damage
to garments and to components in
the machine.
Do not use solvent-based clean‐
ing agents in or on this machine.
General tips
– Curtains: Remove lead weights first
or place in a laundry bag.
Sort the laundry
Sort the laundry by colour and by
care label. Most garments have a tex‐
tile care label in the collar or side
seam.
– Underwiring and collar stiffeners: Any
loose wiring in bras, shirt collar stiff‐
eners, etc. should be removed or
sewn in.
Tip: Dark textiles often contain excess
dye and should be washed separately
several times before being included in a
mixed load. Always wash whites and
coloureds separately.
– Close any zips, attach velcro fasten‐
ers, fasten hooks and eyes etc. be‐
fore washing.
– Fasten duvet covers, pillow cases
etc. to prevent small items from being
rolled up inside them.
Pre-treat stains
Badly soiled areas, stains etc. should
be cleaned as soon as possible, pref‐
erably whilst still fresh. Spillages
should be carefully dabbed off using
a soft, colourfast cloth. Do not rub.
Do not wash any items in this washing
machine which are specified by the
manufacturer as not washable on the
care label ( symbol).
17
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Select a programme
Switch on the washing ma‐
chine
Press the button.
Programme selection
Turn the programme selector to the
required programme.
The display shows the estimated pro‐
gramme duration.
During the first 10 minutes, the machine
measures how much water is being ab‐
sorbed by the laundry. The programme
duration may be longer or shorter de‐
pending on the is absorbency rate.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Load the washing machine
Open the door
Close the door
Press the Door button to open the
door.
Make sure that no items are caught
between the door and the seal.
Unfold the laundry and load loosely
into the drum.
Mixing both large and small items
gives better wash results and also
helps distribute the load evenly during
spinning.
Please note the maximum load for the
different wash programmes. The rele‐
vant programme load is always shown
in the display when you select a pro‐
gramme.
The most efficient use of energy and
water is achieved when a full load is
washed. However, do not overload as
this reduces cleaning efficiency and
causes creases.
Shut the door with a gentle swing.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select programme settings
Select an extra option(s)
Select a spin speed
Each press of the upper button selects
the extra options: Soak or Pre-wash or
Short or no extra option.
You can alter the pre-set spin speed
of a wash programme.
Use the lower button to select the Wa‐
ter plus extra option.
Press the Spin button repeatedly until
the indicator light of the spin speed
you want comes on.
Select the extra option(s) you want.
Tip: Not all the extra options are suita‐
ble for use with every programme.
You can only select extra options
which are compatible with the pro‐
gramme being used.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Add detergent
It is important to dispense the correct
amount, because . . .
. . . too little detergent results in:
– Laundry not getting properly clean
and with time it may become grey
and hard to the touch.
– Greasy particles clinging to laundry.
– Limescale deposits on the heater ele‐
ments.
. . . too much detergent results in:
Pull out the detergent dispenser
drawer and add detergent to the
compartments as follows:
– Excessive foam which causes a low
level of agitation and poor wash,
rinse and spin results.
– High water consumption (an addi‐
tional rinse cycle will automatically
switch in).
Detergent for the pre-wash (divide the
total recommended amount as follows:
add 1/3 to compartment and 2/3 to
– A burden to the environment.
compartment )
Detergent for the main wash, including
Soak, if selected
Fabric conditioner or liquid starch
Close the detergent dispenser draw‐
er.
Tip: See "Detergent" for further infor‐
mation.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Start the programme - the end of a programme
Start the programme.
Press the flashing Start button.
Check that all items have been re‐
moved from the drum. Items left in
the drum could discolour other items
in the next wash or become discol‐
oured themselves.
At the end of a programme
When the programme has finished the
Anti-crease/Finish indicator light will
light up in the programme sequence
display and an 0 will appear in the dis‐
play.
The washing machine will switch off
automatically 15 minutes after the end
of the anti-crease phase. Press the
button to switch it back on again.
Press the Door button to open the
door.
Remove the laundry.
Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
Switch the washing machine off with
the button and turn the pro‐
gramme selector to Finish.
Close the door. Otherwise there is a
danger of objects being placed inad‐
vertently in the drum. If these re‐
mained unnoticed and were washed
in the next load, they could damage
the laundry.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Extra options
You can use the extra options buttons
to augment the wash programmes.
The following extra options
can be selected in addition to
the programme:
Only one of the following extra options
can be selected at a time: Short, Pre-
wash and Soak.
Short
Use this option for light soiling with no
visible staining.
The wash duration is reduced.
Pre-wash
For laundry with large amounts of dirt,
e.g. dust and sand.
Cottons
X
X
–
X
X
–
X
X
–
X
X
–
Soak
Minimum iron
Automatic plus
For heavily soiled and stained items
with protein stains.
Dark garments /
Denim
X
X
X
–
– A duration of between 30 minutes
and 2 hours can be programmed in
30 minute increments for the soak
process.
X1)
X
–
Express 20
–
–
X
Shirts
X
–
X
–
X
–
– The factory default setting is 2 hours.
Woollens
Delicates
Drain / Spin
See "Programmable functions - Soak"
for instructions on how to programme a
different soak period.
X
–
X
–
X
–
–
–
Separate rinse /
Starch
–
–
–
X
Water plus
The water level in the wash and rinse
stages is increased.
X
= Can be selected
However, you can select other settings
for Water plus. These are described in
"Programmable functions".
–
= Cannot be selected
= Can be deselected
1)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Spinning
Final spin speed
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the in‐
terim spin speed. If a spin speed of less
than 700 rpm is selected for the Cot‐
tons programme, an additional rinse is
introduced.
Programme
Cottons
rpm
1400
1200
1200
1200
1400
600
Minimum iron
Automatic plus
Dark garments / Denim
Express 20
Shirts
To omit the final spin (Rinse
hold)
1200
600
Woollens
Delicates
Press the Spin button until the
(Rinse hold) indicator light comes on.
The laundry will not be spun and will
remain suspended in the final rinse
water. This reduces creasing if the
laundry is not going to be removed
immediately after the end of the pro‐
gramme.
Drain / Spin
1400
1400
Separate rinse / Starch
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
– To start the final spin:
Tip: For programmes with a maximum
spin speed not shown on the control
panel, the nearest spin speed above it
will light up. However, to protect the
laundry the machine will only spin at
the spin speed quoted in the chart.
Use the Spin button to select the
spin speed you want. The machine
will begin the final spin.
– Press the Door button. the water will
drain away. Press the Door button
again to open the door.
To omit rinse and interim spin
and the final spin
Press the Spin button repeatedly until
the light comes on.
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch in. In some pro‐
grammes an additional rinse is intro‐
duced with this setting.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Cottons
30°C to 90°C
Max. load 7.0 kg
Use for
Cotton, linen or cotton mix fabric, e.g. table linen, towelling, under‐
wear, T-shirts etc.
Note
Where particularly high levels of hygiene are required please select a
temperature of 90°C or higher.
Cottons
Use for
Note
Max. load 7.0 kg
/
Normally soiled cotton garments.
– These settings are the most efficient in terms of energy and water
consumption for washing cottons.
– With the actual wash temperature reached will be lower than
60°C although the wash performance is the same as with the
standard Cottons 60°C programme.
Note for test institutes:
The test programme conforms to EN 60456 and the energy label to Directive
1061/2010.
Minimum iron
60°C to 20°C
Synthetic, mixed fibre and easy care cotton.
Reduce the spin speed for fabric which creases easily.
40°C Max. load 5.0 kg
Max. load 3.5 kg
Use for
Note
Automatic plus
Use for
Mixed loads of garments suitable for the Cottons and Minimum iron
programmes.
Note
The wash parameters (e.g. water level, wash rhythm and spin
speed) are adjusted automatically in this programme to ensure the
best possible care and wash result for each item.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Dark garments /
Denim
40°C
Max. load 3.0 kg
Use for
Notes
Black and dark items made of cotton, mixed fibre or denim.
– Wash inside out.
– Denim often contains excess dye and may run during the first few
washes. Wash light and dark coloured items separately.
Express 20
40°C
Max. load 3.5 kg
Use for
Cotton garments that have hardly been worn or are only very lightly
soiled.
Note
The Short option is activated automatically.
Shirts
Notes
40°C
Max. load 2.0 kg
– Pre-treat soiled cuffs and collars if necessary.
– Wash silk shirts and blouses in the Delicates programme.
cold and 30°C
Max. load 2.0 kg
Woollens
Use for
Machine-washable or hand-washable wool or wool blend fabric. If
the care label does not specify a temperature, wash using the cold
setting.
Notes
Reduce the spin speed for items which crease easily.
Delicates
Use for
cold to 40°C
Max. load 2.0 kg
Delicate garments made from synthetic fibre, mixed fibre, rayon and
viscose.
Curtains, including net curtains, specified as machine-washable by
the manufacturer.
Notes
– Dust in curtains usually makes a programme with pre-wash advis‐
able.
– Deselect the spin for items which crease easily.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Drain / Spin
–
Notes
– Drain only: Select for the spin speed.
– Make sure you select the appropriate spin speed.
Separate rinse / Starch Max. load 7.0 kg
Use for
– Rinsing handwashed items.
– Starching table cloths, serviettes and workwear.
Notes
– Reduce the spin speed for items which crease easily.
– The laundry should be washed but not treated with fabric condi‐
tioner.
– Items will be rinsed very effectively using two rinse cycles by acti‐
vating the Water plus extra option. The or option of the Wa‐
ter plus system programmable function must be activated.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme sequence
Main wash
Rinses
Spinning
Water
level
Wash
rhythm
Water
level
Rinses
2-41)2)
2-33)
Cottons
Minimum iron
Automatic plus
2-33)
3
Dark garments / Denim
Express 20
1-33)
–
–
–
Shirts
2
2
3
–
1
Woollens
Delicates
Drain / Spin
Separate rinse / Starch
–
Please see the next page for a description of the symbols.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme sequence
Special features in the pro‐
gramme sequence
Anti-crease:
At the end of the programme the drum
continues to turn at intervals for up to
30 minutes to help prevent creasing.
Exception: There is no anti-crease
phase in the Woollens programme.
The door can be opened at any time
during the anti-crease phase.
= Low water level
= Medium water level
= High water level
= Intensive rhythm
= Normal rhythm
= Gentle rhythm
= Sensitive rhythm
= Ultra sensitive rhythm
= Handwash rhythm
= Carried out
1) A second rinse is carried out when a
temperature of 60°C and above has
been selected. A third rinse is carried
out when a temperature below 60°C
is selected.
–
= Not carried out
2) A third or fourth rinse is carried out if:
The washing machine has fully elec‐
tronic controls with automatic load rec‐
ognition. It takes in the right amount of
water required for the programme de‐
pending on the amount of laundry and
its absorbency rate.
– there is too much foam in the drum
– a spin speed lower than 700 rpm has
been selected
– is selected
The programme sequences shown in
the chart are based on the standard
programme with a full load. Extra op‐
tions which can be selected have not
been taken into account.
3) A third rinse is carried out if:
– is selected
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Garment care label symbols
Drying
Washing
The number of dots indicates the dry‐
ing temperature
The figure quoted in the bucket is the
maximum temperature the garment
can be washed at. The number of
bars under the symbol indicates the
level of agitation permitted.
Normal temperature
Low temperature
Do not tumble dry
No bar under the symbol:
= normal agitation
Ironing
One bar under the symbol:
= reduced agitation
The number of dots indicates the iron‐
ing temperature
Two bars under the symbol:
= much reduced agitation
Hot iron (max. sole plate temp.
approx. 200°C)
Hand wash (if no temperature is
specified, use the lowest tem‐
perature or cold)
Medium hot iron (max. sole
plate temp. approx. 150°C)
Cool iron (max. sole plate temp.
approx. 110°C).
Do not wash
Do not steam iron garments
carrying this symbol as this
could cause irreversible dam‐
age.
Programme selection examples
Programme
Garment care la‐
bel symbols
Cottons
Do not iron
Professional cleaning
Minimum iron
Automatic plus
Express 20
Dry clean only. The letters indi‐
cate the type of cleaning agent
required.
Professional Wet Clean only
Do not dry clean
Woollens
Delicates
Bleaching
Any oxidising bleaching agent
can be used
Only use an oxygen based
bleach or a non-chlorine bleach
Do not bleach
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the programme sequence
Cancelling a programme
Interrupting a programme
You can cancel a programme at any
time after it has started:
Switch the washing machine off with
the button.
Turn the programme selector to Fin‐
Switch the washing machine back on
with the button to continue with
the same programme.
ish.
The water will drain away. The pro‐
gramme is cancelled as soon as the
Anti-crease/Finish indicator light comes
on and appears in the display.
Changing a programme
After the start of a programme it is not
possible to select a different pro‐
gramme.
Selecting a different programme af‐
ter cancelling the programme
Temperature
Switch the washing machine back on
It is possible to select a different tem‐
perature up to 6 minutes after the pro‐
gramme has started.
with the button.
Check that there is still detergent in
the dispenser drawer. Add more de‐
tergent if necessary.
Spin speed
Turn the programme selector to the
programme you want and start the
programme by pressing the Start but‐
ton.
It is possible to change the spin speed
at any time.
Extra options
It is possible to select or deselect the
Water plus extra option up to 6 minutes
after the programme has started.
Removing laundry after cancelling
the programme
Turn the programme selector to
Drain/Spin.
Tip: Select an appropriate spin speed.
Press the Start button.
The suds will be pumped away.
Press the Door button to open the
door.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the programme sequence
Adding or removing laundry af‐
ter the programme has started
Press the Door button until the door
opens.
Add or remove items.
Close the door.
The programme will continue automati‐
cally.
Please note:
Once a programme has started the
washing machine cannot recognise any
adjustment to the load.
For this reason, if laundry is added or
removed after the start of a programme,
the machine will always complete the
programme cycle assuming a full load
This can lead to an increase in the time
left displayed.
The door cannot be opened, if:
– the suds temperature is above 55°C.
– the water is above a certain level.
– the final spin is being carried out.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
The correct detergent
Dispensing aids
All detergents produced for automatic
washing machines are suitable. Follow
the manufacturer's instructions and
dosage recommendations on the pack‐
aging.
Use dispensing aids, (e.g. balls) if these
are supplied with the detergent, partic‐
ularly when using liquid detergent.
Refill packs of detergent
When purchasing detergent buy refill
packs wherever possible. This helps re‐
duce the amount of waste packaging.
The right amount to dispense
will depend on the following:
– the soiling level of the load
Water softeners
– the quantity of the laundry
A water softener can be used to cut
down on the use of detergents in areas
with water hardness levels II and III.
Dispense according to the amount
specified on the packaging. First add
detergent and then the water softener.
– the water hardness level.
Check with your local water supplier
if you do not know the hardness level
in your area.
Definition of the soiling level
You can then use the recommended
amount of detergent for water hardness
level I.
– Lightly soiled
No visible dirt or stains. Possibly
slight body odour.
– Normally soiled
Fabric conditioner and liquid
starch
Fabric conditioner
makes garments soft to handle and
helps prevent static cling when tumble
drying.
Visibly dirty and/or just a few slight
stains.
– Heavily soiled
Soiling and/or stains clearly visible.
Water hardness levels
Starch
Hardness
scale
Hardness level German scale
stiffens and gives body to items of
laundry, e.g. shirts, tablecloths and bed
linen.
in mmol/l
°d
I (soft)
II (medium)
III (hard)
0 – 1.5
0 – 8.4
1.5 – 2.5
above 2.5
8.4 – 14
above 14
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
Miele recommended detergents
Miele detergents and care products have been specially designed for Miele wash‐
or from Miele.
Miele
Miele
Miele
Miele
UltraWhite UltraColor Wool and deli‐ fabric condi‐
cates detergent
tioner
Cottons
–
–
–
–
Minimum iron
Automatic plus
Dark garments / Denim
Express 20
–
–
–
–
–
–
Shirts
–
–
Woollens
Delicates
–/–
–
–
Separate rinse / Starch
–/–
–/–
/–
Recommended
–
Not recommended
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
Recommended detergents in accordance with Directive
(EU) Nr. 1015/2010
The recommendations apply to the temperature ranges given in the Programme
chart.
Universal
Coloureds
Delicates and
woollens
Specialist
detergent
Cottons
–
–
–
–
–
–
1)
Minimum iron
Dark garments / Denim
–
1)
–
Express 20
–
–
–
Shirts
–
–
–
–
Woollens
Delicates
–
–
1)
Recommended
Liquid detergent
Powder detergent
2)
–
Not recommended
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
Dispensing fabric conditioner
and liquid starch at the end of
the programme
Adding fabric conditioner or
liquid starch separately
Prepare the starch in accordance with
the manufacturer's instructions on the
packaging.
Add fabric conditioner to the com‐
partment.
Add liquid starch to the compart‐
ment and powder or viscous starch
to the compartment.
Select the Separate rinse/Starch pro‐
gramme.
Change the spin speed if necessary.
Press the Start button.
Add the fabric conditioner or liquid
starch to the compartment. Do
not exceed the maximum level
mark.
Colour run and dye removers/
dyes
The agent will be automatically dis‐
pensed in the last rinse. At the end of
the programme a small amount of water
will remain in the compartment.
Do not use colour run or dye re‐
movers in this washing machine.
They can cause corrosion in the ma‐
chine.
If starching frequently, thoroughly
clean the dispenser compartment,
especially the siphon tube regularly.
Dyes suitable for use in domestic wash‐
ing machines can be used. However,
please note that the salt used in the
dyeing process can cause corrosion to
stainless steel components in the ma‐
chine if you dye frequently. Always ob‐
serve the manufacturer's instructions
carefully.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning the drum
Cleaning the detergent dis‐
penser drawer
The pre-wash and main wash compart‐
ments of the detergent dispensing
drawer are self-cleaning.
Washing at low temperatures and/or
using liquid detergent can cause bacte‐
ria and unpleasant odours to build up in
the washing machine. In order to clean
the drum and also to prevent unpleas‐
ant odours building up, run a pro‐
gramme with a temperature of at least
60°C using powder detergent once a
month or when the Hygiene info light
comes on.
For hygiene reasons, clean the entire
drawer at regular intervals.
External casing and fascia
panel
Disconnect the machine from
the mains electricity supply before
cleaning or maintenance.
The washing machine must not
be hosed down.
Pull out the detergent dispenser
drawer until a resistance is felt. Press
down the release button and at the
same time pull the drawer right out of
the machine.
Clean the casing and fascia panel
with a mild non-abrasive cleaning
agent or soap and water using a well
wrung-out cloth. Wipe dry with a soft
cloth.
Clean the drawer with hot water.
The drum can be cleaned with a pro‐
prietary stainless steel cleaning
agent, following the manufacturer's
instructions on the packaging.
Do not use solvents, abrasive
cleaners, glass cleaners or multi-pur‐
pose cleaning agents. These could
damage plastic surfaces and other
parts.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning the siphon
Cleaning the detergent dispenser
drawer housing
1. Remove the siphon from the
compartment and rinse under hot
running water. Clean the siphon tube
at the same time.
Use a bottle brush to remove deter‐
gent residues and limescale from the
jets inside the detergent dispenser
drawer housing.
2. Replace the siphon.
Liquid starch can cause the siphon
to become clogged. Make sure that
you clean the siphon and siphon
tube particularly thoroughly after us‐
ing liquid starch a few times.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
To clean the filter in the water inlet
valve:
Cleaning the water inlet filters
The washing machine has two filters to
protect the water inlet valve. These fil‐
ters should be checked every six
months or so, or more often if there are
frequent interruptions to the water sup‐
ply.
Using pliers, carefully loosen the rib‐
bed plastic nut on the inlet valve and
unscrew.
To clean the filter in the union in the
open end of the inlet hose:
First turn off the stopcock.
Unscrew the inlet hose from the stop‐
cock.
Use pointed nose pliers to withdraw
the plastic filter by the bar (see illus‐
tration).
Clean the filter.
Replace the filter in the reverse order.
After cleaning the filters, turn on the
stopcock and check the connection
is watertight. If water drips out, tight‐
en the connection.
Remove the rubber seal 1 from the
recess.
Using pointed pliers, take hold of the
The two filters must be put back in
place after cleaning.
plastic filter bar 2 and remove it.
Clean the filter.
Replace the filter and seal back in the
reverse order and reconnect the
hose.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Minor faults in the performance of the washing machine, some of which may result
from incorrect operation, can be put right without contacting the Service Depart‐
ment.
The following guide may help you to find the reason for a fault, and to correct it.
You should, however, note the following:
Repair work to electrical appliances should only be carried out by a suitably
qualified person in strict accordance with current local and national safety regu‐
lations. Repairs and other work by unqualified persons could be dangerous.
The manufacturer cannot be held liable for unauthorised work.
The programme does not start
Problem
Cause and remedy
The Anti-crease/Finish There is no power to the machine.
indicator light is not on
or the Start button is
not flashing.
Check whether the mains plus is plugged in and
switched on.
Check whether the fuse or circuit breaker has trip‐
ped.
Check whether the door is closed properly.
The washing machine has switched off automatically
to save energy.
Switch it back on with the button.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
The wash programme stops and a fault indicator light comes on.
Problem
Cause and remedy
The Check drainage
fault indicator light
flashes and a fault num‐
ber appears in the dis‐
play.
The water outlet is blocked.
Clean the drain filter and the drain pump as de‐
scribed in "Problem solving guide – Opening the
drum door in the event of a blocked water outlet
and/or a power failure".
The drain hose has been fixed too high.
The maximum delivery head is 1 m.
The Check inlet fault in‐ The water inlet is blocked.
dicator light flashes and
a fault number appears
in the display.
Open the stopcock.
The filter in the water inlet hose is dirty.
Clean the filter.
The Check inlet and
Check drainage fault in‐
dicator lights flash and
a fault number appears
in the display.
The water protection system has reacted.
Close the stopcock.
Call the Miele Service Department.
The Soak/Pre-wash or
Rinses flash and a fault
number appears in the
display.
There is a fault.
Start the programme again. If the fault indicator
comes on again, call the Miele Service Depart‐
ment.
To switch off the fault indicator: Switch the washing machine off with the button
and turn the programme selector to Finish.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
A check or fault indicator light comes on but the wash
programme continues as normal.
Problem
Cause and remedy
The Hygiene info check A programme using a temperature above 60°C has
indicator light comes
on.
not been run for a long time.
In order to prevent bacteria and unpleasant
odours building up in the machine, run the Cot‐
tons 90°C using powder detergent.
The Check dosage
check indicator light
comes on.
Excessive foam has built up during washing.
Use less detergent next time, and follow the man‐
ufacturer's recommended dosage amounts on the
packaging.
The Main wash or Rin‐ The washing machine has detected a fault during the
ses indicator lights
flash in the programme
sequence display and a
fault number appears in
the display.
wash programme.
Start the programme again. If the fault indicator
comes on again, call the Miele Service Depart‐
ment.
The Anti-crease/Finish The programme selector was moved to another posi‐
indicator light flashes in tion after the programme had started.
the programme se‐
quence display.
Turn the programme selector back to the original
position.
To switch off the fault indicator: Switch the washing machine off with the button
and turn the programme selector to Finish.
The check indicator lights come on at the end of a programme and when the
washing machine is switched on.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
General problems with the washing machine
Problem
Cause and remedy
The machine shakes
during the spin cycle.
The machine feet are not level.
Level the machine and adjust the feet correctly.
The laundry has not
The machine detected an imbalance during the final
been spun properly and spin cycle and reduced the spin speed automatically.
is still wet.
Include both large and small items in the load as
this will give better distribution during spinning.
Strange pump noises
can be heard.
This is not a fault.
These slurping noises occur at the end of the pump
sequence as a normal part of operation.
Large amounts of de‐
tergent residue remain
in the detergent dis‐
penser drawer.
The water pressure is too low.
Clean the water inlet filter.
It may be useful to select the Water plus extra op‐
tion.
Powder detergent used in conjunction with water
softeners tends to become sticky.
In future, add washing powder into the dispenser
drawer first, and then add the water softener.
Fabric conditioner is
not completely dis‐
pensed or too much
water remains in the
compartment.
The siphon tube is not correctly positioned or is clog‐
ged.
Clean the siphon, see "Cleaning and care - Clean‐
ing the detergent dispenser drawer".
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
An unsatisfactory wash result
Problem
Cause and remedy
Liquid detergents usually contain no bleaching
Liquid detergent does
not give the required re‐ agents. They do not remove fruit, coffee and tea
sult.
stains.
Use a general purpose powder detergent contain‐
ing a bleaching agent.
Add stain removers to compartment of the dis‐
penser drawer.
Never put stain removers and liquid detergent to‐
gether in the dispenser drawer.
Grey, greasy particles
cling to washed laun‐
dry.
Insufficient amounts of detergent were used to break
down the particles of grease in heavily soiled laundry.
Use more detergent.
Before washing the next load run a Cottons 60°C
programme with powder detergent but without a
load.
White residues which
The detergent contained compounds (zeolites) to aid
look like powder deter‐ water softening which are not soluble in water. These
gent are seen on dark
textiles after washing.
have ended up on the laundry.
Try and brush off the residues with a soft brush
once the laundry is dry.
Wash dark textiles using a detergent which con‐
tains no zeolites. Liquid detergents usually contain
no zeolites.
Use the Dark garments / Denim programme for
dark coloured laundry.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
The door will not open
Problem
Cause and remedy
The washing machine is not connected to the electri‐
The drum door cannot
be opened by pressing cal supply and / or is not switched on.
the Door button.
Insert the plug in the socket and switch on and /
or switch the machine on with the button.
Power cut.
Open the door as described in “Opening the door
in the event of blocked drain outlet and/or power
failure”.
The door was not correctly engaged.
Press hard against the lock side of the door and
then press the Door button.
There is still water in the drum and the machine is un‐
able to drain.
Clean the drain filters and the drain pump.
For safety reasons the door cannot be opened if the
suds temperature is higher than 55°C.
Allow the programme to finish or cancel it and wait
until the temperature in the drum has dropped.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Blocked drain outlet
Opening the door in the event
of a blocked drain outlet
and/or power failure
If the drain outlet is blocked, a large
quantity of water (up to 25 litres) can
remain in the washing machine.
Switch off the washing machine.
Caution: If laundry has been
washed at a high temperature, water
draining out of the machine will still
be hot. Danger of scalding!
There is a lever behind the detergent
drawer fascia panel for opening the ac‐
cess panel to the drain filter.
Procedure for draining the washing
machine
Place a suitable container under the
access flap.
When draining water from the ma‐
chine, do not unscrew the drain filter
completely or take it right out.
Remove the lever.
Slowly and carefully unscrew the
drain filter to let the water out. Be
careful not to release too much water
at once. If the flow of water is too
strong, some water can seep into the
washing machine base and activate
the water protection float switch. This
will prevent the washing machine
from functioning.
Use it to open the access panel.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Tighten the drain filter back up again
if you need to interrupt the flow of
water.
Make sure the drain filter is se‐
curely tightened. Otherwise there is a
risk of water leakage during use.
Once the flow of water ceases:
To avoid loss of detergent, pour approx.
2 litres of water into the detergent dis‐
penser drawer after cleaning the drain
filter. Excess water will be pumped out
automatically before the next wash pro‐
gramme.
Opening the door
Always make sure that the drum
is stationary before reaching in to re‐
move laundry. Reaching into a mov‐
ing drum is extremely dangerous.
Remove the drain filter completely.
Clean it thoroughly.
Pull the emergency release down‐
wards. The door will open.
Remove any foreign objects (e.g. but‐
tons, coins, etc.) and fluff from the fil‐
ter housing. Turn the impeller by hand
to check that it rotates freely.
Put the drain filter back in place and
secure it.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
After sales service
Repairs
Guarantee: U.K.
In the event of any faults which you
cannot remedy yourself, please con‐
tact:
In the U.K, the washing machine is
guaranteed for 2 years from the date of
purchase.
– your Miele Dealer, or
In the U.K. you must activate your cov‐
er by calling 0330 160 6640 or register‐
– Miele (Contact details for Miele are
given at the end of this booklet).
When contacting your Dealer or Miele,
please quote the model and serial num‐
ber of your machine, both of which are
shown on the data plate visible above
the porthole glass when the door is
open.
Guarantee: Other countries
For information on the appliance guar‐
antee specific to your country please
contact Miele. See end of this booklet
for contact details.
Optional accessories
Optional spare parts and accessories
for this washing machine are available
from your Miele Dealer, the Miele Spare
Parts Department or via the internet at
Please note that telephone calls may
be monitored and recorded for training
purposes.
N.B. A call-out charge will be applied
for service visits where the problem
could have been resolved as descri‐
bed in these instructions.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Front view
a
e
Inlet hose (tested to withstand pres‐
Detergent dispenser drawer
sure of at least 7000 kPa)
f
Door
b
Electrical supply cable
g
Access to drain filter, drain pump and
emergency release
c
Flexible drain hose (with detachable
swivel elbow)
h
Handle recesses for moving the ma‐
d
Control panel
chine
i
Four height adjustable feet
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Rear view
a
e
Protruding lid for holding when mov‐
ing the machine
Transport clip for inlet and drain ho‐
ses
b
f
g
Electrical supply cable
Safety cap for transit bars
c
Inlet hose (tested to withstand pres‐
sure of at least 7000 kPa)
Transport clip for inlet and drain ho‐
ses and for storing transit bars when
not in use
d
Drain hose
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Transporting the washing machine to
its installation site
Installation surface
A concrete floor is the most suitable in‐
stallation surface for a washing ma‐
chine, being far less prone to vibration
during the spin cycle than wooden
floorboards or a carpeted surface.
To manoeuvre the washing machine out
of its packing case to its installation
site, hold it by the edge of the lid where
it protrudes to the rear of the machine
as well as by the handle recesses at the
front.
Please note:
The machine must be level and se‐
Ensure that the machine feet and
the floor are dry to prevent the ma‐
chine from slipping during the spin
cycle.
curely positioned.
To avoid vibrations during spinning,
the machine should not be installed
on soft floor coverings.
If installing on a wooden joist floor:
Removing the transit bars
We recommend a plywood base at
least 59 x 52 x 3 cm). The base
should span several joists and be
bolted to the joist and not only the
floorboards. Check for the presence
of pipes and cables first.
Tip: If possible, install the machine in a
corner, as this is usually the most stable
part of the floor.
If the machine is installed on a
raised plinth, it has to be secured
against slippage during spinning us‐
ing retaining clips (available from
Miele). Otherwise there is the danger
of the machine moving and falling off
the plinth.
To remove the left and right covers
1. Pull on the attached stopper,
2. then use a screwdriver to release the
catches at the top and bottom.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Turn the right-hand transit bar 90°,
then
Using the spanner supplied, turn the
left-hand transit bar 90°, then
pull the transit bar out.
pull the transit bar out.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
To avoid the risk of injury, the
holes for the transit bars must be
covered after the transit bars have
been removed.
Secure the transit bars to the back of
the washing machine. Make sure the
top catch is located above the holder.
The washing machine must not
be moved without the transit bars in
place. Store them as shown or keep
them in a safe place for future use.
They must be re-fitted if the machine
is to be moved again (e.g. when
moving house).
Plug the holes with the plastic caps
as illustrated.
Re-fitting the transit bars
Re-fitting is carried out by reversing the
procedure.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Levelling the machine
The washing machine must stand per‐
fectly level on all four feet to ensure
safe and proper operation.
Incorrect installation may increase elec‐
tricity and water consumption and may
cause the machine to move about.
Screwing out and adjusting the feet
The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the machine is deliv‐
ered.
Use a spirit level to check that the
washing machine is standing level.
Hold foot 1 securely with a pipe
wrench. Turn counter nut 2 again us‐
ing the spanner supplied until it sits
firmly up against the housing.
All four counternuts must be
firmly up against the housing. Please
also check this for the feet which did
not need adjustment. Otherwise
there is a danger of the machine
moving about.
Using the spanner supplied turn
counter nut 2 in a clockwise direc‐
tion. Then turn counter nut 2 together
with foot 1 to unscrew.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Washer-dryer stack
Please note:
The washing machine can be combined
with a Miele tumble dryer in a washer-
dryer stack. The appropriate "WTV"
stacking kit* to match your dryer is re‐
quired.
All parts marked* are available from
your Dealer or Miele.
Building under a continuous work‐
top/ in a kitchen run
Building under kits* must only be in‐
stalled/dismantled by a suitably
qualified fitter in accordance with the
instructions supplied.
– A special building under kit* with a
cover plate to replace the machine lid
is required. It must be fitted by a suit‐
ably qualified fitter to ensure electri‐
cal safety. N.B. If there is space to
push the washing machine under the
worktop without removing the lid, the
building under kit is not necessary.
Otherwise it is essential.
a
b
Safety distance to wall at least 2
cm
Height:
Stacking kit with pull-out shelf:
approx. 169 cm
Stacking kit without pull-out shelf:
approx. 170 cm
– Connections for electricity, water and
drainage should be installed in such
a way that they remain accessible
when the machine is in its final posi‐
tion.
Fitting instructions are supplied with the
conversion kit.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Electronic unit and washing machine
housing
The water protection system
The Miele water protection system pro‐
tects all parts of the washing machine
from water damage.
– Sump
Any leaking water is collected in a
sump in the base of the machine. A
float switches off the water inlet
valves, preventing any more water
from flowing into the machine and
water in the suds container is pum‐
ped away.
The system consists of three main
components:
– the inlet hose
– the electronic unit and drainage and
overflow protection
– Overflow protection
– the drain hose
This prevents the washing machine
taking in too much water. If the water
level exceeds a certain level, the
drain pump switches in and pumps
the excess water away.
Inlet hose
– Protection against bursting
The inlet hose is tested to withstand
pressure of at least 7,000 kPa.
Drain hose
The drain hose is protected by a venti‐
lation system which prevents the wash‐
ing machine from being emptied com‐
pletely.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Maintenance
Connection to the water sup‐
ply
Only use a genuine Miele hose should
you ever need a replacement or exten‐
sion. These are tested to withstand
pressure of at least 7,000 kPa.
The washing machine should be con‐
nected to a mains water supply in ac‐
cordance with current local and nation‐
al safety regulations. The German au‐
thorities do not require it to have a non-
return valve as the washing machine
has been designed to comply with DIN
regulations.
In order to protect the water inlet
valve, the two dirt filters (one in the
open end of the inlet hose, the other
in the inlet point in the machine)
must not be removed.
The machine is designed to operate
with a flow pressure of between 100
and 1,000 kPa. If it is higher than 1,000
kPa it is essential to fit a pressure re‐
ducing valve.
Extension hose
Longer hoses 2.5 or 4.0 m in length are
available from your Miele Dealer or
Miele as optional extras.
Connection to the mains water supply
should incorporate a mains stopcock
with 3/4" threaded union. The stopcock
should be fitted by a qualified plumber.
The connection point is subject
to mains water pressure. Turn on the
stopcock slowly and check for leaks.
Correct the position of the washer
and union if appropriate.
The washing machine is not suitable
for connection to a hot water supply.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
3. Connected securely to a floor gully.
4. Connected securely to a standpipe.
Please note:
Connection to the drainage
system
The machine drains via a drain pump
with a delivery head of 1 metre*. The
drain hose must not be kinked as this
restricts drainage. The swivel elbow at
the end of the hose can be turned in ei‐
ther direction, or can be detached if re‐
quired, with a sharp twist and pull.
If required, the drain hose can be exten‐
ded to a length of 5 m. The necessary
parts can be purchased from your Miele
Dealer or Miele.
* For a delivery head of more than 1 m
(up to a max. of 1.8 m) a replacement
drain pump will need to be fitted.
Please contact Miele or your Miele
Dealer for advice. If necessary, the
drain hose can be extended to a length
of 2.5 m. The necessary parts can be
purchased from your Miele Dealer or
Miele.
Adapter
Nut
Hose clip
End of the hose
Fit adapter to the sink drain outlet
using nut .
Drain hose connection:
1. Direct into a sink or basin.
Attach the end of the hose to
adapter .
Please note the following:
– Hook the hose over the edge and
secure.
Use a screwdriver to tighten hose clip
up close to the nut.
– Make sure that the water can drain
away freely without hindrance.
Otherwise there is a risk of water
overflowing or of some of the
drained water being sucked back
into the machine.
2. Connected securely to a plastic drain
pipe with a rubber nipple. There is no
need to use a non-return valve.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Non-rewireable plugs BS 1363
Electrical connection U.K.
The fuse cover must be refitted when
changing the fuse, and if the fuse cover
is lost, the plug must not be used until
a suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is em‐
bossed in words on the base of the
plug (as applicable to the design of
plug fitted).
All electrical work should be carried out
by a suitably qualified and competent
person, in strict accordance with cur‐
rent national and local safety regula‐
tions (BS 7671 in the UK).
Ensure power is not supplied to the ap‐
pliance until after installation work has
been carried out.
The appliance is supplied with a mains
cable with moulded plug ready for con‐
nection to a 230-240V mains supply.
Replacement fuses should be ASTA ap‐
proved to BS 1362 and have the cor‐
rect rating. Replacement fuses and fuse
covers may be purchased from your lo‐
cal electrical supplier.
Please ensure the connection data quo‐
ted on the data plate match the house‐
hold mains supply.
Connection should be made via a suita‐
ble switched socket which is easily ac‐
cessible after installation.
WARNING: THIS APPLIANCE
MUST BE EARTHED
For extra safety it is advisable to protect
the machine with a suitable residual
current device (RCD). Contact a quali‐
fied electrician for advice.
Do not connect via an extension lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Height
850 mm
Width
595 mm
Depth
610 mm
Depth with door open
Height for building under
Width for building under
Depth for building under
Weight
987 mm
820 mm
600 mm
600 mm
Approx. 94 kg
7 kg dry laundry
See data plate
See data plate
See data plate
See "Consumption data"
100 kPa
Capacity
Voltage
Connected load
Fuse rating
Consumption data
Minimum flow pressure
Maximum flow pressure
Inlet hose length
Drain hose length
Mains connection cable length
Delivery head max.
Maximum drainage length
LEDs
1000 kPa
1.60 m
1.50 m
1.60 m
1.00 m
5.00 m
Class 1
Test certificates awarded
See data plate
Power consumption when switched off 0.30 W
Power consumption when not switched 1.00 W
off
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumption data
Load
Consumption data
Energy
in kWh
Water
in l
Duration
Residual
moisture
Cottons
90°C
60°C
60°C
*
*
40°C
40°C
*
40°C
40°C
40°C
40°C
30°C
30°C
7.0 kg
7.0 kg
3.5 kg
7.0 kg
3.5 kg
7.0 kg
3.5 kg
3.5 kg
3.5 kg
5.0 kg
3.5 kg
2.0 kg
2.0 kg
2.0 kg
2.20
1.33
1.00
0.94
0.82
0.87
0.76
0.58
0.60
0.52
0.32
0.50
0.23
0.38
52
52
45
52
45
67
45
45
49
62
30
42
39
69
2 h 29 min
1 h 59 min
1 h 59 min
2 h 59 min
2 h 59 min
2 h 29 min
2 h 29 min
2 h 59 min
1 h 59 min
1 h 29 min
20 min
52%
52%
52%
52%
52%
52%
52%
52%
30%
–
Minimum iron
Automatic plus
Express 20
Shirts
–
54 min
–
39 min
–
Woollens
Delicates
59 min
–
Note for test institutes
*Test programme in accordance with EN 60456 and energy label with
Directive 1061/2010
Consumption data can vary from the nominal values given depending on water
pressure, water hardness, water inlet temperature, room temperature, type and
volume of load, fluctuations in the electricity supply and any options selected.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable functions
Press the Start button and keep it
pressed in whilst carrying out steps
to .
The programmable functions are used
to alter the machine's electronics to
suit changing requirements. Program‐
mable functions can be altered at any
time.
Switch machine on with the but‐
ton.
Wait until the indicator light for the
Water plus system
Start button lights up constantly . . .
This programmable function is used to
specify one of three options for the
the Water plus button.
. . . and then release the Start but‐
ton.
Turn the programme selector to Cot‐
tons 60°C.
:
(Factory default setting)
The water level is increased in the wash
and rinse stages.
A will flash in the display alternating
with the number , or .
Each subsequent press on the Start
button selects a different option and
will flash alternately in the display
with the number of the option selec‐
ted.
:
An extra rinse is carried out.
:
The water level is increased in the wash
and rinse stages and an extra rinse is
carried out.
Switch the washing machine off with
the button.
Follow steps to to programme
and store in memory.
The programmable functions are ac‐
cessed via the Start button and the pro‐
gramme selector.
Before you begin, ensure that:
– The washing machine is switched off.
– The machine door is closed properly.
– The programme selector is at Finish.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable functions
Press the Start button and keep it
pressed in whilst carrying out steps
to .
Gentle action
Activating gentle action reduces the
drum action and is suitable for wash‐
ing lightly soiled items more gently.
Switch machine on with the but‐
ton.
Gentle action can be activated for the
Cottons and Minimum iron pro‐
grammes.
Wait until the indicator light for the
Start button lights up constantly . . .
. . . and then release the Start but‐
The washing machine is delivered with
the Gentle action setting deactivated.
ton.
Turn the programme selector to Cot‐
Follow steps to to programme
and store in memory.
tons :
A will flash in the display alternating
with the number or .
The programmable functions are ac‐
cessed via the Start button and the pro‐
gramme selector.
Pressing the Start button switches
the programmable function on or off.
If flashes in the display alternating
with the number , the programma‐
ble function is switched on. If
flashes in the display alternating with
the number , the programmable
function is switched off.
Before you begin, ensure that:
– The washing machine is switched off.
– The machine door is closed properly.
– The programme selector is at Finish.
Switch the washing machine off with
the button.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable functions
Press the Start button and keep it
pressed in whilst carrying out steps
to .
Suds cooling
When this is activated, additional wa‐
ter flows into the drum at the end of
the main wash to cool the suds down.
Hot suds can damage plastic drainage
pipes.
Switch machine on with the but‐
ton.
Wait until the indicator light for the
Start button lights up constantly . . .
Suds cooling takes place when a tem‐
perature of 90°C or higher is selected
for the Cottons programme.
. . . and then release the Start but‐
ton.
Turn the programme selector to Cot‐
Suds cooling should be activated:
tons 40°C
– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
A will flash in the display alternating
with the number or .
Pressing the Start button switches
the programmable function on or off.
If flashes in the display alternating
with the number , the programma‐
ble function is switched on. If
flashes in the display alternating with
the number , the programmable
function is switched off.
– where drainage pipes do not comply
with DIN 1986.
– The machine is delivered with Suds
cooling deactivated.
Follow steps to to programme
and store in memory.
The programmable functions are ac‐
cessed via the Start button and the pro‐
gramme selector.
Switch the washing machine off with
the button.
Before you begin, ensure that:
– The washing machine is switched off.
– The machine door is closed properly.
– The programme selector is at Finish.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable functions
Press the Start button and keep it
pressed in whilst carrying out steps
to .
Memory
If an extra option is selected for a pro‐
gramme and / or the spin speed is al‐
tered, the washing machine stores
these changes in memory at the start
of a programme.
Switch machine on with the but‐
ton.
Wait until the indicator light for the
Start button lights up constantly . . .
When that particular programme is
chosen again, the washing machine
will display the extra option and / or
the spin speed which have been stor‐
ed for that programme in memory.
. . . and then release the Start but‐
ton.
Turn the programme selector to Cot‐
tons .
The machine is delivered with the
memory function deactivated.
A will flash in the display alternating
with the number or .
Follow steps to to programme
and store in memory.
Pressing the Start button switches
the programmable function on or off.
If flashes in the display alternating
with the number , the programma‐
ble function is switched on. If
flashes in the display alternating with
the number , the programmable
function is switched off.
The programmable functions are ac‐
cessed via the Start button and the pro‐
gramme selector.
Before you begin, ensure that:
– The washing machine is switched off.
– The machine door is closed properly.
– The programme selector is at Finish.
Switch the washing machine off with
the button.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable functions
Press the Start button and keep it
pressed in whilst carrying out steps
to .
Soak duration
A soak duration of between 30 mi‐
nutes and 2 hours can be program‐
med in 30 minute increments for the
Soak button.
Switch machine on with the but‐
ton.
Wait until the indicator light for the
If the Soak extra option is selected, the
soaking process will be carried out for
the duration set before the wash pro‐
gramme is run.
Start button lights up constantly . . .
. . . and then release the Start but‐
ton.
Turn the programme selector to Cot‐
The machine is delivered with a 2 hour
duration set for the Soak button.
tons 30°C
A will flash in the display alternating
with the number , , or .
Follow steps to to programme
and store in memory.
The programmable functions are ac‐
cessed via the Start button and the pro‐
gramme selector.
=
2 h soak duration
(factory default setting)
=
=
=
1 h 30 min soak duration
1 h soak duration
Before you begin, ensure that:
– The washing machine is switched off.
– The machine door is closed properly.
– The programme selector is at Finish.
30 min soak duration
Each subsequent press on the Start
button selects a different option and
will flash alternately in the display
with the number of the option selec‐
ted.
Switch the washing machine off with
the button.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional accessories
Detergent, fabric care, additives and
machine care products are available for
this washing machine. All the products
have been designed for Miele washing
machines.
Wool and delicates detergent
– liquid detergent for delicates
– particularly suitable for woollen and
silk garments
– cleans at temperatures as low as
20°C, helps retain the shape of deli‐
cate garments and protect colours
These and many other useful products
can be ordered via the internet at
(see end of this booklet for contact de‐
tails).
Specialist detergents
Outerwear
– liquid detergent for outerwear and
performance clothing
– cleans with care and is gentle on col‐
ours
Detergent
– with lanolin to care for and condition
membrane fabric
UltraWhite
– powder detergent
Sports
– suitable for white and light coloured
laundry as well as heavily soiled cot‐
ton items
– liquid detergent for sportswear and
fleece garments
– neutralises unpleasant odours
– retains the shape of the textiles
– effective stain removal even at low
temperatures
UltraColor
Down items
– liquid detergent for coloureds
– liquid detergent suitable for pillows,
sleeping bags and down filled items
– suitable for coloured and dark/black
garments
– retains the elasticity of down and
feather filled items
– protects bright colours from fading
– retains the breathability of down filled
items
– effective stain removal even at low
temperatures
– prevents down filling clumping to‐
gether
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional accessories
Fabric care
Machine care products
Fabric care agents are available as cap‐
sules in convenient single dose
amounts or in a handy bottle.
Machine cleaner
– for cleaning the washing machine
thoroughly and effectively
Reproofing agent
– removes grease, bacteria and un‐
pleasant odours
– for reproofing microfibre garments
e.g. rain coats etc.
Descaling agent
– retains the breathability of garments
– removes heavy limescale deposits
Fabric conditioner
– mild and gentle with natural citric
acid
– fresh, natural fragrance
– makes laundry soft to handle
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
United Kingdom
Miele Co. Ltd.
Fairacres, Marcham Road
Abingdon, Oxon, OX14 1TW
Customer Contact Centre Tel: 0330 160 6600
E-mail: [email protected]
Malaysia
Miele Sdn Bhd
Suite 12-2, Level 12
Menara Sapura Kencana Petroleum
Solaris Dutamas No. 1, Jalan Dutamas 1
50480 Kuala Lumpur, Malaysia
Phone: +603-6209-0288
Fax: +603-6205-3768
Australia
Miele Australia Pty. Ltd.
ACN 005 635 398
ABN 96 005 635 398
1 Gilbert Park Drive, Knoxfield, VIC 3180
Tel: 1300 464 353
New Zealand
Miele New Zealand Limited
IRD 98 463 631
China
Level 2, 10 College Hill
Freemans Bay, Auckland 1011, NZ
Tel: 0800 464 353
Miele (Shanghai) Trading Ltd.
1-3 Floor, No. 82 Shi Men Yi Road
Jing' an District
200040 Shanghai, PRC
Tel: +86 21 6157 3500, Fax: +86 21 6157 3511
Singapore
Miele Pte. Ltd.
163 Penang Road
# 04 - 03 Winsland House II
Singapore 238463
Tel: +65 6735 1191, Fax: +65 6735 1161
E-Mail: [email protected]
Miele (Hong Kong) Limited
41/F - 4101, Manhattan Place
23 Wang Tai Road
Kowloon Bay, Hong Kong
Tel: (852) 2610 1331, Fax: (852)2610 1013
Email: [email protected]
South Africa
Miele (Pty) Ltd
India
63 Peter Place, Bryanston 2194
P.O. Box 69434, Bryanston 2021
Tel: (011) 875 9000, Fax: (011) 875 9035
E-mail: [email protected]
Miele India Pvt. Ltd.
Ground Floor, Copia Corporate Suites
Plot No. 9, Jasola
New Delhi - 110025
Tel: 011-46 900 000, Fax: 011-46 900 001
United Arab Emirates
Miele Appliances Ltd.
P.O. Box 11 47 82
Gold & Diamond Park, Sheikh Zayed Road
Building 6 / Offices Nos. 6-214 to 6-220
Dubai
Tel: +971-4-341 84 44
Fax: +971-4-341 88 52
E-Mail: [email protected]
Ireland
Miele Ireland Ltd.
2024 Bianconi Avenue
Citywest Business Campus, Dublin 24
Tel: (01) 461 07 10, Fax: (01) 461 07 97
Manufacturer: Miele & Cie. KG
Carl-Miele-Straße 29, 33332 Gütersloh, Germany
69
Download from Www.Somanuals.com. All Manuals Search And Download.
WDA 110
en-GB
M.-Nr. 09 900 700 / 01
Download from Www.Somanuals.com. All Manuals Search And Download.
|