Operating and installation instructions
Cooker hood
To prevent the risk of accidents or damage to the appliance, it is
essential to read these instructions before it is installed and used for
the first time.
en-GB
M.-Nr. 09 767 780
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Electrical connection........................................................................................... 33
Activating Con@ctivity 2.0................................................................................... 34
Activating the hob............................................................................................. 35
After Sales / Guarantee ....................................................................................... 36
Position of the data plate....................................................................................... 36
Technical data ...................................................................................................... 37
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
This appliance complies with all relevant local and national safety
requirements. Inappropriate use can, however, lead to personal
injury and damage to property.
To avoid the risk of accidents and damage to the appliance,
please read these instructions carefully before using it for the first
time. They contain important notes on the safety, installation, use
and maintenance of the appliance. Miele cannot be held liable for
non-compliance with these instructions.
Keep these instructions in a safe place and ensure that all users
are familiar with the contents. Pass them on to any future owner of
the appliance.
Correct application
This cooker hood is intended for use in domestic households and
similar working and residential environments.
The cooker hood is not intended for outdoor use.
It must only be used as a domestic appliance to extract vapours
and remove odours from cooking.
Any other usage is not supported by the manufacturer and could be
dangerous.
The cooker hood can only be used by people with reduced
physical, sensory or mental capabilities, or lack of experience and
knowledge, if they are supervised whilst using it, or have been
shown how to use it in a safe way and recognise and understand the
consequences of incorrect operation.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Safety with children
Children under 8 years of age must be kept away from the cooker
hood unless they are constantly supervised.
Children 8 years and older may only use the cooker hood
unsupervised if they have been shown how to use it safely and
recognise and understand the consequences of incorrect operation.
Children must not be allowed to clean or maintain the cooker
hood unsupervised.
Please supervise children in the vicinity of the cooker hood and
do not let them play with it.
Danger of suffocation. Packaging, e.g. plastic wrappings, must be
kept out of the reach of babies and children. Whilst playing, children
could become entangled in packaging or pull it over their head and
suffocate.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Technical safety
Unauthorised installation, maintenance and repairs can cause
considerable danger for the user. Installation, maintenance and
repairs must only be carried out by a Miele authorised technician.
A damaged appliance can be dangerous. Check it for visible signs
of damage. Do not use a damaged appliance.
The electrical safety of this appliance can only be guaranteed
when correctly earthed. It is essential that this standard safety
requirement is met. If in any doubt please have the electrical
installation tested by a qualified electrician.
Before connecting the appliance to the mains supply, ensure that
the connection data on the data plate (voltage and frequency) match
the mains electricity supply. This data must correspond in order to
avoid the risk of damage to the appliance. Consult a qualified
electrician if in any doubt.
Do not connect the appliance to the mains electricity supply by a
multi-socket unit or an extension lead. These are a fire hazard and
do not guarantee the required safety of the appliance.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
For safety reasons, this appliance may only be used after it has
been built in.
The cooker hood must not be used in a non-stationary location
(e.g. on a ship).
Tampering with electrical connections or components and
mechanical parts is highly dangerous to the user and can cause
operational faults.
Only open the housing as described in the instructions given in the
installation sheet and in the Cleaning and care section of this
booklet. Under no circumstances should any other parts of the
housing be opened.
The manufacturer's warranty will be invalidated if the appliance is
not repaired by a Miele approved service technician.
Miele can only guarantee the safety of the appliance when
genuine original Miele replacement parts are used. Faulty
components must only be replaced by Miele spare parts.
Do not pull on the mains connection cable. It must not be used
for securing other components (such as a shelf).
If the electrical connection cable is faulty it must only be replaced
by a Miele authorised service technician to protect the user from
danger.
During installation, maintenance and repair work, the appliance
must be disconnected from the mains electricity supply.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Correct use
Never use a naked flame beneath the cooker hood. To avoid the
danger of fire, do not flambé or grill over a naked flame.
When switched on, the cooker hood could draw flames into the filter.
Fat deposits could ignite, presenting a fire hazard.
The cooker hood can become damaged when exposed to
excessive heat.
– When using the cooker hood over a gas hob, ensure that any
burners in use are always covered by a pan. Switch the cooking
zone off when a pan is removed, even for a short time.
– Select a pan which is suitable for the size of the burner.
– Regulate the flame so that it does not burn up the sides of the
pan.
– Avoid overheating the pan (e.g. when cooking with a wok).
Always switch the cooker hood on when a cooking zone is in use,
otherwise condensation may collect in the hood, which could cause
corrosion.
When cooking with oil or fat, chip pans and deep fat fryers etc, do
not leave the pans unattended. Never leave an open grill unattended
when grilling. Overheated oil and fat can ignite and could set the
cooker hood on fire.
Do not use the cooker hood without the filters in place. This way
you will avoid the risk of grease and dirt getting into the appliance
and hindering its smooth operation.
The filters should be regularly cleaned or changed as appropriate.
Saturated filters are a fire hazard.
The cooker hood can get very hot during cooking due to heat
rising from the hob.
Do not touch the housing or the grease filters until the cooker hood
has cooled down.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Correct installation
Refer to the cooker or hob manufacturer's instructions as to
whether a cooker hood may be operated above the cooker/hob.
Safety regulations prohibit the fitting of a cooker hood over solid
fuel stoves.
Insufficient distance between the cooker or hob and the cooker
hood can result in damage to the hood.
The minimum safety distances between the top of the cooker or hob
and the bottom of the cooker hood given in the "Installation" section
must be maintained, unless the hob manufacturer states that a
greater distance is required.
If more than one cooking appliance is fitted beneath the cooker
hood, and they have different minimum safety distances to the
cooker hood, select the greater distance.
The distances given in "Installation" must be observed when
fitting the cooker hood.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Cleaning and care
Do not use a steam cleaning appliance to clean this appliance.
The steam could reach electrical components and cause a short
circuit.
Accessories
Only use genuine original Miele accessories with this appliance.
Using accessories from other manufacturers will invalidate the
guarantee, and Miele cannot accept liability.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Disposal of the packing
material
The packaging is designed to protect
the appliance from damage during
transportation. The packaging materials
used are selected from materials which
are environmentally friendly for disposal
and should be recycled.
Recycling the packaging reduces the
use of raw materials in the
manufacturing process and also
reduces the amount of waste in landfill
sites.
Disposal of your old appliance
Electrical and electronic appliances
often contain valuable materials. They
also contain materials which, if handled
or disposed of incorrectly, could be
potentially hazardous to human health
and to the environment. They are,
however, essential for the correct
functioning of your appliance. Please
do not therefore dispose of it with your
household waste.
Please dispose of it at your local
community waste collection / recycling
centre or contact your Dealer for
advice.
Ensure that it presents no danger to
children while being stored for disposal.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes of operation
Recirculation mode
This cooker hoods operates solely in
recirculation mode.
The air is drawn in and cleaned first by
the grease filters and then by four
charcoal filters. The cleaned air is then
recirculated back into the kitchen
through ventilation grilles in the top of
the cooker hood.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Modes of operation
The hob transmits information about its
operational status via a radio signal to
the cooker hood.
Con@ctivity 2.0 function
Automatic control
The cooker hood has a communication
facility which enables the automatic
operation of the cooker hood
depending on the operational state of
the hob.
– When the hob is switched on, the
hob lighting comes on independently
and then after a short time the fan
also comes on.
– During cooking the cooker hood
automatically sets the power level
according to the number of cooking
zones in operation and their power
levels.
– After switching the hob off the fan
and the hob lighting will switch off
automatically after a specified period
of time.
See "Operation" for detailed
information about this function.
To make use of the communication
facility the hob must be fitted with a
Con@ctivity 2.0 Stick .
Refer to the installation instructions for
the Con@ctivity 2.0 Stick to check
whether it is compatible with your hob.
To use the Con@ctivity 2.0 function, a
wireless connection must be
established between the hob and the
cooker hood (see "Activating
Con@ctivity 2.0").
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the appliance
a
b
c
d
e
Suspension cables
Canopy
Grease filter clips
Grease filters
Controls
The symbols act as sensor controls. To select a function, touch the control. An
audible tone sounds briefly to confirm selection.
f
g
h
i
j
k
l
m
n
Hob lighting
Recirculation grilles
Charcoal filters (x 4)
Sensor control for switching the fan on and off
Sensor control for hob lighting
Sensor controls for selecting the fan power level
Sensor control for the run-on option
Operating hours control for the grease filters
Operating hours control for the charcoal filters
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation (Automatic mode)
When Con@ctivity 2.0 is activated, the
cooker hood always works in automatic
mode (see "Activating Con@ctivity
2.0").
Reaction time
The cooker hood reacts with a slight
delay because altering the power level
on the hob does not immediately result
in a reduction or increase in cooking
vapours.
To operate the cooker hood manually,
see "Cooking without Con@ctivity 2.0".
Because the hob transmits the
information to the cooker hood at
intervals, this can also cause delays.
Cooking with Con@ctivity 2.0
(Automatic mode)
Switch a cooking zone on at the
power level you want.
The reaction can vary from a few
seconds to a couple of minutes.
The cooker hood lighting will come on.
After a few seconds the fan will come
on, first at power level 2, then it will
switch immediately to power level 1.
The cooker hood selects the power
level automatically during cooking.
This is determined by the total output of
the hob, i.e, the number of cooking
zones in operation and the power levels
selected.
If you select a higher power level or
are using several cooking zones, the
cooker hood will switch to a higher
power level.
When you reduce the power level or
the number of cooking zones on the
hob, the cooker hood power level is
also reduced.
Examples for power levels 1 to 4
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation (Automatic mode)
Cooking process
Switching off
If for example you switch on a
cooking zone at the highest power
level to heat a pan for frying and
reduce the power level after approx.
60 to 90 seconds*, a cooking process
is recognised (*60 seconds to 5
minutes for a HiLight hob).
Switch off all cooking zones.
The cooker hood fan will reduce its
power level over the next few minutes
and will eventually switch itself off.
This helps to neutralise any lingering
vapours and odours in the air.
The cooker hood switches itself on and – From the intensive setting IS the fan
when the hob power level has been
reduced, the hood switches to power
level 3 and remains at that level for
approx. 5 minutes.
switches immediately to level 3.
– From level 3, it switches to level 2
after approx. 1 minute.
– From level 2 it switches to level 1
after approx. 2 minutes.
After that the cooker hood power level
is determined automatically by the
Con@ctivity function.
– After 2 minutes at level 1 the fan
switches itself off.
You can select another power level
manually before then.
– After another 30 seconds the lighting
switches off.
The cooking process is then finished.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation (Automatic mode)
Leaving automatic mode
temporarily
To leave automatic mode temporarily
during cooking:
Returning to automatic mode
The cooker hood returns to automatic
mode:
if the cooker hood has not been used
for approx. 5 minutes after selecting
a power level manually, or
Manually select a different power
level, or
if the manually selected fan power
level corresponds to the automatic
one again, or
Manually switch the cooker hood off,
or
Activate the run-on option on the
cooker hood. The fan will switch off
after the selected time and the
if the cooker hood fan and the hob
have been switched off for at least 30
seconds.
Automatic mode will resume next
time the hob is switched on.
lighting remains switched on.
The cooker hood can now be operated
manually (see "Cooking without
Con@ctivity 2.0").
If you wish to operate the cooker
hood manually for a complete
cooking process, switch on the
cooker hood fan before switching on
the hob.
If the cooker hood and the hob have
been switched off for at least 30
seconds after cooking, automatic
mode will resume the next time the
hob is switched on.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation (Manual mode)
Cooking without Con@ctivity
2.0 (Manual mode)
The cooker hood can be operated
manually if:
Selecting the run-on time
It is advisable to run the fan for a few
minutes after cooking has finished to
neutralise any lingering vapours and
odours in the air.
With the run-on option the fan switches
itself off automatically after a pre-
selected time.
– Con@ctivity 2.0 is not activated.
– You have temporarily deactivated
Con@ctivity 2.0 (see "Leaving
automatic mode temporarily").
After you have finished cooking,
touch the run-on option control .
Switch the fan on
Touch the On/Off sensor .
– Once: the fan will switch itself off
after 5 minutes (5 lights up).
The fan will come on at power level 2.
– Twice: The fan will switch itself off
after 15 minutes ( 15 lights up).
Select the power level
– If you touch the run-on option control
again, the fan will remain on (5
15 will go out).
For light to heavy cooking vapours and
odours, select from power levels 1 to 3.
When frying or cooking food with a very
strong aroma, select the Intensive
setting IS.
Switching the fan off
Use the On/Off control to switch
the fan off.
Select the power level required by
touching a control from 1 to IS.
Reducing power on the intensive
setting
If Power management is activated
(default), the fan automatically switches
to level 3 after 5 minutes.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation (Manual mode)
Switching Power management on/off
Switching the hob lighting
on/off
Switch off the fan and the lighting.
The hob lighting can be switched on
and off independently of the fan.
Touch the run-on option control
for approx. 10 seconds, until 1 lights
up in the power level display.
Touch the hob lighting control .
Then touch in turn,
Power management
– the lighting control ,
– the 1 and then
The cooker hood features a power
management system for switching off
the lighting and reducing the fan power
level automatically.
– the lighting control again.
If Power management is switched on,
the 1 and IS indicators will light up
constantly.
– If the Intensive setting has been
selected the cooker hood will
automatically switch down to power
level 3 after 5 minutes.
If it is switched off, 1 and IS will flash.
Touch 1 to switch Power
management off.
– From levels 3, 2 or 1 the power will
be reduced by one level after 2 hours
and then in 30 minutes stages until
the fan finally switches off.
The 1 and IS indicators will flash.
Touch IS to switch it on.
– The hob lighting will switch off
automatically after 12 hours.
The 1 and IS indicators will light up
constantly.
Confirm the setting with the run-on
option control
All the indicator lamps will go out
If you do not confirm within 4 minutes,
the cooker hood will revert to the old
setting.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation (Automatic and Manual modes)
The Grease filter symbol and one of
the fan power level indicators will flash.
Operating hours counters
The number of hours the appliance has
been in operation is stored in memory.
Fan power level indicators 1 to IS show
the time set:
When the Grease filter symbol or the
Charcoal filter symbol lights up, the
operating hours counters are signalling
that the filters need to be cleaned or
changed. Further information about
cleaning and changing the filters and
resetting the operating hours counter
can be found under "Cleaning and
care".
1............................................... 20 hours
2............................................... 30 hours
3............................................... 40 hours
IS ............................................. 50 hours
Touch the relevant sensor to select
the duration required.
Confirm your choice by touching the
Grease filter control .
Altering the operating hours counter
for the grease filters
All the indicator lamps will go out
You can set the operating hours
counter for the grease filter to suit the
type of cooking you do.
If you do not confirm within 4 minutes,
the cooker hood will revert to the old
setting.
The grease filter operating hours
counter is set at the factory for 30
hours.
– Select a shorter time of 20 hours if
you fry a lot.
– If you only cook occasionally we
recommend that you still select a
short time because grease which has
built up gradually over a long period
of time will harden on the filter and
make cleaning more difficult.
– Select a longer time of 40 or 50
hours if you use very little fat for
cooking.
Use the On/Off control to switch
the fan off.
Touch the run-on option control
and the Grease filter sensor at the
same time.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation (Automatic and Manual modes)
Activating and altering the charcoal
filter operating hours counter
Reading the filter operating hours
counter
Charcoal filters are needed for
recirculation mode.
To check the percentage of time set
already used
The operating hours counter for the
charcoal filter needs to be activated
once and the operating hours counter
needs to be set to suit the kind of
cooking you do:
Touch the On/Off control to switch
the fan on.
Press and hold the Grease filter
control or the Charcoal filter
control .
Use the On/Off control to switch
the fan off.
One or more of the power level
indicators will flash.
Touch the run-on option control
and the Charcoal filter control at
the same time.
The number of fan power level
indicators flashing shows the
percentage of the operating time which
has already been used up.
The Charcoal filter symbol and one
of the fan power levels will flash.
1 ................................................... 25 %
1 and 2 ......................................... 50 %
1 to 3 ............................................ 75 %
1 to IS ......................................... 100 %
Fan power level indicators 1 to IS show
the time set:
1............................................. 120 hours
2............................................. 180 hours
3............................................. 240 hours
IS ........................................ Deactivated
The number of operating hours used
remains in the memory, even when
the appliance is switched off or there
is a power cut.
Touch the relevant sensor to select
the duration required.
Confirm your choice by touching the
Charcoal filter control .
All the indicator lamps will go out.
If you do not confirm within 4 minutes,
the cooker hood will revert to the old
setting.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation (Automatic and Manual modes)
Acoustic signal of the sensor
controls
When selecting a function with the
sensor controls an acoustic signal will
sound for confirmation.
The acoustic signal can be deactivated.
Use the On/Off control to switch
the fan off.
Touch the IS and the Grease filter
controls at the same time for approx.
5 seconds until a short acoustic
signal is heard.
The acoustic signal function is now
switched off.
To reactivate the acoustic signal,
follow the steps as per deactivating
the signal.
When power is restored to the cooker
hood after it has been disconnected
from the mains electricity supply or
after a power cut, the acoustic signal
will be activated again, regardless of
the previous setting.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Important for appliances with
stainless steel surfaces
Casing
General information
Stainless steel surfaces can be
cleaned with a proprietary non-
abrasive cleaning agent designed
specifically for use on stainless steel.
The surfaces and controls are
susceptible to scratches and
abrasion.
Please observe the following
cleaning instructions.
To help prevent re-soiling, a
proprietary conditioning agent for
stainless steel (available from Miele)
can also be used. Follow the
manufacturer’s instructions on the
packaging.
All external surfaces and controls can
be cleaned using hot water with a
small amount of washing-up liquid
applied with a well wrung-out soft
sponge or cloth.
Important for appliances with
lacquered housing
After cleaning, wipe the surfaces dry
using a soft cloth.
Please observe the general notes on
cleaning earlier in this section.
Do not use:
It is very difficult to clean this type of
surface without causing minor marks
to the surface material. This can
become particularly noticeable if there
is halogen lighting in the kitchen.
– cleaning agents containing soda,
acids, chlorides or solvents,
– abrasive cleaning agents, e.g.
powder cleaners or cream cleaners
and abrasive sponges, as well as pot
scourers or sponges which have
been used previously with abrasive
cleaning agents. These will damage
the surface material.
Important for appliances with glass
surfaces
Glass surfaces can be cleaned using
a proprietary non-abrasive cleaning
agent designed specifically for use
on glass.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Grease filters
The re-usable metal grease filters in the
appliance remove solid particles
(grease, dust, etc.) from the kitchen
vapours, preventing soiling of the
cooker hood.
An oversaturated filter is a fire
hazard.
Cleaning interval
To take out a grease filter, release the
locking clip on the filter, lower the
filter approx. 45°, unhook it at the
back and remove it.
The grease filters should be cleaned
regularly (at least every 3 - 4 weeks) to
avoid a build-up of grease.
Clean them immediately if the Grease
filter operating hours symbol lights
up.
Cleaning the grease filters by hand
Clean the filters with a soft nylon
brush in a mild solution of hot water
and a small amount of washing-up
liquid. Do not use "neat" washing up
liquid.
You can set the operating hours
counter for the grease filters to suit
the type of cooking you do (see
"Operation").
Unsuitable cleaning agents
Removing a grease filter
Unsuitable cleaning agents can cause
damage to the surface of the filters if
used regularly.
The grease filter can fall out when
you are handling it.
This can result in damage to the filter
and the hob below.
Make sure you hold the filter
securely at all times when handling
it.
Do not use:
– cleaning agents containing descaling
agents
– powder cleaners, cream cleaners
– aggressive multi-purpose cleaning
agents or spray cleaners for grease
– oven sprays
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning the grease filters in the
dishwasher
If a grease filter is inadvertently
replaced upside down, insert a small
screwdriver blade into the slit to
disengage the clip.
Place the filters as upright as
possible in the lower basket, with the
short sides upright, ensuring the
spray arm is not obstructed.
Resetting the grease filter operating
hours counter
Use a proprietary household
dishwasher detergent.
After cleaning, the operating hours
counter needs to be re-set.
Select a dishwasher programme with
a wash temperature between 50°C
and 65°C.
Whilst the fan is switched on, press
the Grease filter control for
approx. 3 seconds, until only the 1 is
flashing.
Depending on the cleaning agent
used, cleaning the filters in a
The Grease filter symbol goes out.
dishwasher can cause permanent
discolouration to the surface.
However, this will not affect the
functioning of the filters in any way.
If you want to clean the grease filters
before the operating hours counter has
reached its maximum,
Touch the Grease filter control for
approx. 6 seconds, until only the 1 is
flashing.
After cleaning
After cleaning, leave the filters to dry
on an absorbent surface before
replacing them.
When removing the filters for
cleaning, also clean off any residues
of oil or fat from the now accessible
housing to prevent the risk of these
catching fire.
Replace the grease filters, making
sure that the locking clips are facing
down towards the hob.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Fitting and replacing a charcoal filter
Charcoal filter
Before fitting or replacing a charcoal
filter, the grease filters must first be
taken out (see previous section for
instructions on how to do this).
With recirculation mode, four charcoal
filters must be fitted in the grease filters.
These are designed to absorb cooking
odours.
They are fitted into the canopy from
above.
Take the charcoal filters out of their
packaging.
Charcoal filters can be obtained from
your Miele dealer or via the internet at
manual for contact details, and
"Technical data" for type and reference
number.
Open the holders for the charcoal
filters.
Insert the charcoal filters and close
the holders.
Replace the grease filters.
When fitting for the first time, activate
the operating hours counter (see
"Operation").
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
When to change the charcoal filter
Always replace the charcoal filters
when they no longer absorb kitchen
odours effectively.
They should, however, be replaced at
least every 2 years.
The charcoal filter operating hours
symbol will light up to remind you to
change the charcoal filters.
The charcoal filter operating hours
counter needs to be activated before
using for the first time (see
"Operation").
Resetting the charcoal filter
operating hours counter
After changing the charcoal filters, the
operating hours counter needs to be re-
set.
Touch the Charcoal filter control
for approx. 3 seconds with the
cooker hood switched on until only
the indicator light for level 1 is
flashing.
The Grease filter symbol will go out.
If you want to replace the charcoal
filters before the operating hours
counter has reached its maximum:
Touch the Charcoal filter control
for approx. 6 seconds until only the
indicator light for level 1 is flashing.
Disposing of the charcoal filters
Used charcoal filters can be disposed
of with the normal household waste.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Before installation
Before installation, it is important
to read the information given on the
following pages as well as the
"Warning and Safety instructions" at
the beginning of this booklet.
4 sets of ceiling fixings
For suspending the cooker hood from
the ceiling. Set contains 4 cables, 4
casing fixings and 4 ceiling fixings.
Assembly parts
The cables must not be used for
securing other components such as
a shelf.
4 screws 5 x 60 mm and
4 plugs 8 x 50 mm
For securing to the ceiling.
The screws and plugs are suitable
for use in concrete ceilings.
For other types of ceiling
construction, alternative fixings will
be required.
3 cable clamps
For securing the mains connection
cable to one of the suspension cables.
Make sure the ceiling is able to take
the weight of the cooker hood.
1 strain relief
For securing the mains connection
cable to one of the ceiling fixings.
Drilling template
One of the cardboard inserts serves as
the drilling template.
Installation instructions
See enclosed Installation sheet for
instructions on how to install this
appliance.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
a
Mains connection cable
Safety distance between hob and cooker hood (S)
When planning the installation height of your cooker hood, the minimum safety
distance between the top of a cooker or hob and the bottom of the cooker
hood is as follows, unless a greater distance is specified by the manufacturer of
your cooking appliance.
See "Warning and Safety" instructions for further information.
Cooking appliance
Electric hob
Minimum distance S
450 mm
Electric grill
650 mm
Deep fat fryer (electric)
650 mm
Multi-burner gas hob with a maximum total output of
12.6 kW, no burner exceeding 4.5 kW.
650 mm
Multi-burner gas hob with a total output of more than
12.6 kW, or a multi-burner gas hob where one burner
exceeds 4.5 kW.
760 mm
Single gas burner with a maximum output of 6 kW.
Single gas burner with output exceeding 6 kW.
650 mm
760 mm
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Installation recommendations
– When deciding on the safety
distance between the hob and
cooker hood, please note that a
distance of 650 mm above electric
cookers/hobs may be preferable to
give more working space under the
hood.
– Account should also be taken of the
height of the person who will be
using the hood most often. They
should have sufficient space to work
comfortably at the hob, and be able
to reach the hood controls with ease.
– Please be aware that if positioned
too high, extraction will be inefficient.
– To achieve optimum vapour
extraction, the cooker hood must
cover the hob. It should be
positioned centrally over the hob, not
to the side or to the back of it.
– The hob should be no wider than the
cooker hood, and if possible, it
should be narrower.
– The installation area must be easily
accessible. The cooker hood should
be easily accessible and easy to
dismantle in the event that service is
required. This should be taken into
consideration when planning the
position of cupboards, shelves,
ceilings or features in the vicinity of
the cooker hood.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
If the switch is not accessible after
installation (depending on country), an
additional means of disconnection must
be provided for all poles.
For extra safety it is advisable to protect
the appliance with a suitable residual
current device (RCD). Contact a
qualified electrician for advice.
All electrical work should be
undertaken by a suitably qualified
and competent person in strict
accordance with current national and
local safety regulations (BS 7671 in
the UK).
Installation, repairs and other work
by unqualified persons could be
dangerous, for which the
Important
manufacturer cannot be held liable.
Ensure power is not supplied to the
appliance until after installation or
repair work has been carried out.
Do not connect the appliance to the
mains electricity supply by an
extension lead. These do not
guarantee the required safety of the
appliance.
This appliance is supplied for
connection to an a.c. 230 V single
phase 50 Hz supply. The wires in the
mains lead are coloured in accordance
with the following code:
Green/yellow ..................................earth
Blue..............................................neutral
Brown................................................live
The connection data is given on the
data plate. This is visible when the
grease filters have been removed.
Ensure that this data matches the
household mains supply.
WARNING:
THIS APPLIANCE MUST BE
EARTHED
Connection of this appliance should be
made via a suitable isolator or a double
pole fused spur connection unit which
complies with national and local safety
regulations and the On-Off switch
should be easily accessible after the
appliance has been built in. When
switched off there must be an all-pole
contact gap of 3 mm in the switch
(including switch, fuses and relays
according to EN 60335).
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Activating Con@ctivity 2.0
Activating the cooker hood
Installing the Con@ctivity 2.0
Stick
In order to use the Con@ctivity 2.0
function, the hob must first be fitted
with the Con@ctivity 2.0 Stick.
Switch off the fan, hob lighting and
hob.
Touch the run-on option control
for approx. 10 seconds, until 1 lights
up in the power level display.
Please read the separate installation
instructions supplied with the
Con@ctivity 2.0 Stick.
Then touch in turn,
– the 1 control,
Activating Con@ctivity 2.0
Wireless connection must be activated
between the cooker hood and the hob
before Con@ctivity 2.0 can be used.
– then the IS control,
– then the lighting control .
If Con@ctivity 2.0 has not been
activated, the indicators for levels 2 and
3 will flash at the same time.
Both appliances must be installed and
operational.
To activate Con@ctivity 2.0 touch the
IS control.
You only need to carry out the
activation procedure once. If the
appliances are disconnected from the
electricity supply, during a power cut
for example, they will still remain
activated.
2 will light up constantly and 3 will
flash. The search for a signal starts.
Meanwhile, start the activation of the
hob.
To establish the wireless connection,
the cooker hood and hob must be
activated at the same time.
First activate the cooker hood, then the
hob.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Activating Con@ctivity 2.0
Activating the hob
Activation check
While the cooker hood is searching
for a signal, start activating the hob.
More information about this can be
found in the operating instructions for
the hob.
To check whether Con@ctivity 2.0 has
been activated for the cooker hood:
Switch off the fan and hob lighting.
Touch the run-on option control
for approx. 10 seconds, until 1 lights
up in the power level display.
When connection has been established,
2 and 3 will light up constantly on the
cooker hood.
Then touch in turn,
– the 1 control,
Confirm activation of the cooker
hood with the run-on option control
515. All indicators will go out.
– then the IS control,
– then the lighting control .
Confirm activation of the hob.
If Con@ctivity 2.0 has been activated,
the indicators for levels 2 and 3 will be
lit up constantly.
Con@ctivity 2.0 is now ready to use.
If you do not confirm your selection
within 4 minutes, activation will not take
place.
If Con@ctivity 2.0 has not been
activated, the indicators for levels 2 and
3 will flash at the same time.
To come out of checking mode,
touch the run-on option control .
All indicators will go out.
To check whether Con@ctivity has
been activated on the hob, see the
operating instructions for the hob.
If connection cannot be established
despite activating the Con@ctivity
function on the cooker hood and
hob, the function must be
deactivated on both appliances and
then the procedure repeated.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
After Sales / Guarantee
In the event of a fault which you cannot
remedy yourself, please contact your
Miele dealer or the Miele Service
Department.
Contact details for Miele are given at
the back of this manual. N.B. A call-out
charge will be applied to service visits
where the problem could have been
resolved as described in these
instructions.
When contacting your dealer or Miele,
please quote the model and serial
number of your appliance.
These are shown on the data plate.
Position of the data plate
The data plate is visible after removing
the grease filters.
Guarantee: U.K.
In the U.K., the appliance is guaranteed
for 2 years from the date of purchase.
However, you must activate your cover
by calling 0845 365 6640 or registering
Guarantee: Other countries
For information on the appliance
guarantee specific to your country
please contact Miele. See end of this
booklet for contact details.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Fan motor
2 x 72 W
4 x 3 W
156 W
AC 230 V
5 A
Hob lighting
Total connected load
Voltage
Fuse rating
Mains connection cable length
Weight
1.8 m
33 kg
Recirculation power*
Level 1
250 m³/h
350 m³/h
450 m³/h
600 m³/h
Level 2
Level 3
Intensive setting
*Recirculation mode with charcoal filters DKF 21
Conformity declaration
Miele hereby declares that the cooker hoods listed at the end of this booklet
comply with the basic requirements and other relevant regulations of Guideline
1999/5/EC.
A copy of the full Declaration of Conformity can be obtained from the address at
the end of this booklet.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
8QLWHGꢀ.LQJGRP
-IELEꢀ#Oꢁꢀ,TDꢁ
&AIRACRESꢂꢀ-ARCHAMꢀ2OAD
!BINGDONꢂꢀ/XONꢂꢀ/8ꢃꢄꢀꢃ47
4ELꢅꢀꢆꢇꢄꢈꢀꢉꢊꢈꢀꢆꢈꢈꢈ
#USTOMERꢀ#ONTACTꢀ#ENTREꢀ4ELꢅꢀꢆꢇꢄꢈꢀꢉꢊꢈꢀꢊꢊꢆꢆ
%ꢋMAILꢅꢀINFO MIELEꢁCOꢁUK
)NTERNETꢅꢀWWWꢁMIELEꢁCOꢁUK
0DOD\VLD
-IELEꢀ3DNꢀ"HD
3UITEꢀꢃꢏꢋꢏꢂꢀ,EVELꢀꢃꢏ
-ENARAꢀ3APURAꢀ+ENCANAꢀ0ETROLEUM
3OLARISꢀ$UTAMASꢀ.Oꢁꢀꢃꢂꢀ*ALANꢀ$UTAMASꢀꢃ
ꢈꢆꢄꢇꢆꢀ+UALAꢀ,UMPURꢂꢀ-ALAYSIA
0HONEꢅꢀꢐꢊꢆꢉꢋꢊꢏꢆꢌꢋꢆꢏꢇꢇ
&AXꢅꢀꢐꢊꢆꢉꢋꢊꢏꢆꢈꢋꢉꢎꢊꢇ
$XVWUDOLD
-IELEꢀ!USTRALIAꢀ0TYꢁꢀ,TDꢁ
!".ꢀꢌꢊꢀꢆꢆꢈꢀꢊꢉꢈꢀꢉꢌꢇ
ꢃꢀ'ILBERTꢀ0ARKꢀ$RIVEꢂꢀ+NOXFIELDꢂꢀ6)#ꢀꢉꢃꢇꢆ
4ELꢅꢀꢃꢉꢆꢆꢀꢄꢊꢄꢀꢉꢈꢉꢂꢀ&AXꢅꢀꢍꢆꢉ ꢀꢌꢎꢊꢄꢀꢎꢃꢄꢌ
)NTERNETꢅꢀWWWꢁMIELEꢁCOMꢁAU
1HZꢀ=HDODQG
-IELEꢀ.EWꢀ:EALANDꢀ,IMITED
ꢇꢀ#OLLEGEꢀ(ILL
&REEMANSꢀ"AYꢂꢀ!UCKLANDꢀꢃꢆꢃꢃꢂꢀ.:
4ELꢅꢀꢆꢇꢆꢆꢀꢄꢊꢄꢀꢉꢈꢉꢂꢀ&AXꢅꢀꢐꢊꢄꢀꢌꢉꢎꢇꢀꢆꢃꢄꢊ
)NTERNETꢅꢀWWWꢁMIELEꢁCOꢁNZ
&KLQD
-IELEꢀꢍ3HANGHAI ꢀ4RADINGꢀ,TDꢁ
ꢃꢋꢉꢀ&LOORꢂꢀ.Oꢁꢀꢇꢏꢀ3HIꢀ-ENꢀ9Iꢀ2OAD
*INGgꢀANꢀ$ISTRICT
ꢏꢆꢆꢆꢄꢆꢀ3HANGHAIꢂꢀ02#
4ELꢅꢀꢐꢇꢊꢀꢏꢃꢀꢊꢃꢈꢎꢀꢉꢈꢆꢆꢂꢀ&AXꢅꢀꢐꢇꢊꢀꢏꢃꢀꢊꢃꢈꢎꢀꢉꢈꢃꢃ
%ꢋMAILꢅꢀINFO MIELEꢁCNꢂꢀ)NTERNETꢅꢀWWWꢁMIELEꢁCN
6LQJDSRUH
-IELEꢀ3OUTHEASTꢀ!SIA
-IELEꢀ0TEꢁꢀ,TDꢁ
ꢃꢊꢉꢀ0ENANGꢀ2OAD
¬ꢀꢆꢄꢀꢋꢀꢆꢏꢑꢆꢉꢀ7INSLANDꢀ(OUSEꢀ))
3INGAPOREꢀꢏꢉꢇꢄꢊꢉ
4ELꢅꢀꢐꢊꢈꢀꢊꢎꢉꢈꢀꢃꢃꢌꢃꢂꢀ&AXꢅꢀꢐꢊꢈꢀꢊꢎꢉꢈꢀꢃꢃꢊꢃ
%ꢋ-AILꢅꢀINFOSEA MIELEꢁCOMꢁSG
)NTERNETꢅꢀWWWꢁMIELEꢁSG
0LHOHꢀꢁ+RQJꢀ.RQJꢂꢀ/LPLWHG
ꢄꢃꢑ&ꢀꢋꢀꢄꢃꢆꢃꢂꢀ-ANHATTANꢀ0LACE
ꢏꢉꢀ7ANGꢀ4AIꢀ2OAD
+OWLOONꢀ"AYꢂꢀ(ONGꢀ+ONG
4ELꢅꢀꢍꢇꢈꢏ ꢀꢏꢊꢃꢆꢀꢃꢉꢉꢃꢂꢀ&AXꢅꢀꢍꢇꢈꢏ ꢏꢊꢃꢆꢀꢃꢆꢃꢉ
%MAILꢅꢀMIELEHK MIELEꢁCOMꢁHK
6RXWKꢀ$IULFD
-IELEꢀꢍ0TY ꢀ,TD
,QGLD
ꢊꢉꢀ0ETERꢀ0LACEꢂꢀ"RYANSTONꢀꢏꢃꢌꢄ
0ꢁ/ꢁꢀ"OXꢀꢊꢌꢄꢉꢄꢂꢀ"RYANSTONꢀꢏꢆꢏꢃ
4ELꢅꢀꢍꢆꢃꢃ ꢀꢇꢎꢈꢀꢌꢆꢆꢆꢂꢀ&AXꢅꢀꢍꢆꢃꢃ ꢀꢇꢎꢈꢀꢌꢆꢉꢈ
%ꢋMAILꢅꢀINFO MIELEꢁCOꢁZA
)NTERNETꢅꢀWWWꢁMIELEꢁCOꢁZA
-IELEꢀ)NDIAꢀ0VTꢁꢀ,TDꢁ
'ROUNDꢀ&LOORꢂꢀ#OPIAꢀ#ORPORATEꢀ3UITES
0LOTꢀ.Oꢁꢀꢌꢂꢀ*ASOLA
.EWꢀ$ELHIꢀꢋꢀꢃꢃꢆꢆꢏꢈ
4ELꢅꢀꢆꢃꢃꢋꢄꢊꢀꢌꢆꢆꢀꢆꢆꢆꢂꢀ&AXꢅꢀꢆꢃꢃꢋꢄꢊꢀꢌꢆꢆꢀꢆꢆꢃ
%ꢋMAILꢅꢀCUSTOMERCARE MIELEꢁINꢂꢀ)NTERNETꢅꢀWWWꢁMIELEꢁIN
8QLWHGꢀ$UDEꢀ(PLUDWHV
-IELEꢀ!PPLIANCESꢀ,TDꢁ
0ꢁ/ꢁꢀ"OXꢀꢃꢃꢀꢄꢎꢀꢇꢏ
'OLDꢀꢒꢀ$IAMONDꢀ0ARK
3HEIKHꢀ:AYEDꢀ2OAD
"UILDINGꢀꢊꢀꢑꢀ/FFICESꢀ.OSꢁꢀꢊꢋꢏꢃꢄꢀTOꢀꢊꢋꢏꢏꢆ
$UBAI
4ELꢅꢀꢐꢌꢎꢃꢋꢄꢋꢉꢄꢃꢀꢇꢄꢀꢄꢄ
&AXꢅꢀꢐꢌꢎꢃꢋꢄꢋꢉꢄꢃꢀꢇꢇꢀꢈꢏ
%ꢋ-AILꢅꢀINFO MIELEꢁAE
)NTERNETꢅꢀWWWꢁMIELEꢁAE
,UHODQG
-IELEꢀ)RELANDꢀ,TDꢁ
ꢏꢆꢏꢄꢀ"IANCONIꢀ!VENUE
#ITYWESTꢀ"USINESSꢀ#AMPUSꢂꢀ$UBLINꢀꢏꢄ
4ELꢅꢀꢍꢆꢃ ꢀꢄꢊꢃꢀꢆꢎꢀꢃꢆꢂꢀ&AXꢅꢀꢍꢆꢃ ꢀꢄꢊꢃꢀꢆꢎꢀꢌꢎ
%ꢋ-AILꢅꢀINFO MIELEꢁIEꢂꢀ)NTERNETꢅꢀWWWꢁMIELEꢁIE
0DQXIDFWXUHUꢃ -IELEꢀꢒꢀ#IEꢁꢀ+'
#ARLꢋ-IELEꢋ3TRA”Eꢀꢏꢌꢂꢀꢉꢉꢉꢉꢏꢀ'àTERSLOHꢂꢀ'ERMANY
38
Download from Www.Somanuals.com. All Manuals Search And Download.
DA 6700 D
en-GB
M.-Nr. 09 767 780 / 01
Download from Www.Somanuals.com. All Manuals Search And Download.
|
